From f7ec554b73c5239a96afb9a9c3eb18cb11f539b7 Mon Sep 17 00:00:00 2001 From: Yunsheng Lin Date: Mon, 13 Sep 2021 21:08:20 +0800 Subject: [PATCH 1/6] net: hns3: add option to turn off page pool feature When page pool is added to the hns3 driver, it is always enabled unconditionally, which means spilt page handling in the hns3 driver is dead code. As there is a requirement to test the performance between spilt page handling in driver and page pool, so add a module param to support disabling the page pool. When the page pool is proved to perform better in most case, the spilt page handling in driver can be removed. Fixes: 93188e9642c3 ("net: hns3: support skb's frag page recycling based on page pool") Signed-off-by: Yunsheng Lin Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 22af3d6ce178..293243bbe407 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -61,6 +61,9 @@ static unsigned int tx_sgl = 1; module_param(tx_sgl, uint, 0600); MODULE_PARM_DESC(tx_sgl, "Minimum number of frags when using dma_map_sg() to optimize the IOMMU mapping"); +static bool page_pool_enabled = true; +module_param(page_pool_enabled, bool, 0400); + #define HNS3_SGL_SIZE(nfrag) (sizeof(struct scatterlist) * (nfrag) + \ sizeof(struct sg_table)) #define HNS3_MAX_SGL_SIZE ALIGN(HNS3_SGL_SIZE(HNS3_MAX_TSO_BD_NUM), \ @@ -4753,7 +4756,8 @@ static int hns3_alloc_ring_memory(struct hns3_enet_ring *ring) goto out_with_desc_cb; if (!HNAE3_IS_TX_RING(ring)) { - hns3_alloc_page_pool(ring); + if (page_pool_enabled) + hns3_alloc_page_pool(ring); ret = hns3_alloc_ring_buffers(ring); if (ret) From d18e81183b1cb9c309266cbbce9acd3e0c528d04 Mon Sep 17 00:00:00 2001 From: Yufeng Mo Date: Mon, 13 Sep 2021 21:08:21 +0800 Subject: [PATCH 2/6] net: hns3: pad the short tunnel frame before sending to hardware The hardware cannot handle short tunnel frames below 65 bytes, and will cause vlan tag missing problem. So pads packet size to 65 bytes for tunnel frames to fix this bug. Fixes: 3db084d28dc0("net: hns3: Fix for vxlan tx checksum bug") Signed-off-by: Yufeng Mo Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 293243bbe407..adc54a726661 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -76,6 +76,7 @@ module_param(page_pool_enabled, bool, 0400); #define HNS3_OUTER_VLAN_TAG 2 #define HNS3_MIN_TX_LEN 33U +#define HNS3_MIN_TUN_PKT_LEN 65U /* hns3_pci_tbl - PCI Device ID Table * @@ -1427,8 +1428,11 @@ static int hns3_set_l2l3l4(struct sk_buff *skb, u8 ol4_proto, l4.tcp->doff); break; case IPPROTO_UDP: - if (hns3_tunnel_csum_bug(skb)) - return skb_checksum_help(skb); + if (hns3_tunnel_csum_bug(skb)) { + int ret = skb_put_padto(skb, HNS3_MIN_TUN_PKT_LEN); + + return ret ? ret : skb_checksum_help(skb); + } hns3_set_field(*type_cs_vlan_tso, HNS3_TXD_L4CS_B, 1); hns3_set_field(*type_cs_vlan_tso, HNS3_TXD_L4T_S, From 1dc839ec09d3ab2a4156dc98328b8bc3586f2b70 Mon Sep 17 00:00:00 2001 From: Yufeng Mo Date: Mon, 13 Sep 2021 21:08:22 +0800 Subject: [PATCH 3/6] net: hns3: change affinity_mask to numa node range Currently, affinity_mask is set to a single cpu. As a result, irqbalance becomes invalid in SUBSET or EXACT mode. To solve this problem, change affinity_mask to numa node range. In this way, irqbalance can be performed on the cpu of the numa node. Fixes: 0812545487ec ("net: hns3: add interrupt affinity support for misc interrupt") Signed-off-by: Yufeng Mo Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index e55ba2e511b1..aed97c934bfb 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -1528,9 +1528,10 @@ static void hclge_init_kdump_kernel_config(struct hclge_dev *hdev) static int hclge_configure(struct hclge_dev *hdev) { struct hnae3_ae_dev *ae_dev = pci_get_drvdata(hdev->pdev); + const struct cpumask *cpumask = cpu_online_mask; struct hclge_cfg cfg; unsigned int i; - int ret; + int node, ret; ret = hclge_get_cfg(hdev, &cfg); if (ret) @@ -1595,11 +1596,12 @@ static int hclge_configure(struct hclge_dev *hdev) hclge_init_kdump_kernel_config(hdev); - /* Set the init affinity based on pci func number */ - i = cpumask_weight(cpumask_of_node(dev_to_node(&hdev->pdev->dev))); - i = i ? PCI_FUNC(hdev->pdev->devfn) % i : 0; - cpumask_set_cpu(cpumask_local_spread(i, dev_to_node(&hdev->pdev->dev)), - &hdev->affinity_mask); + /* Set the affinity based on numa node */ + node = dev_to_node(&hdev->pdev->dev); + if (node != NUMA_NO_NODE) + cpumask = cpumask_of_node(node); + + cpumask_copy(&hdev->affinity_mask, cpumask); return ret; } From b81d8948746520f989e86d66292ff72b5056114a Mon Sep 17 00:00:00 2001 From: Yufeng Mo Date: Mon, 13 Sep 2021 21:08:23 +0800 Subject: [PATCH 4/6] net: hns3: disable mac in flr process The firmware will not disable mac in flr process. Therefore, the driver needs to proactively disable mac during flr, which is the same as the function reset. Fixes: 35d93a30040c ("net: hns3: adjust the process of PF reset") Signed-off-by: Yufeng Mo Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index aed97c934bfb..f1e46ba799f9 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -8127,11 +8127,12 @@ static void hclge_ae_stop(struct hnae3_handle *handle) hclge_clear_arfs_rules(hdev); spin_unlock_bh(&hdev->fd_rule_lock); - /* If it is not PF reset, the firmware will disable the MAC, + /* If it is not PF reset or FLR, the firmware will disable the MAC, * so it only need to stop phy here. */ if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state) && - hdev->reset_type != HNAE3_FUNC_RESET) { + hdev->reset_type != HNAE3_FUNC_RESET && + hdev->reset_type != HNAE3_FLR_RESET) { hclge_mac_stop_phy(hdev); hclge_update_link_status(hdev); return; From 472430a7b066f19afa1b55867d621b2d6d323e0d Mon Sep 17 00:00:00 2001 From: Jiaran Zhang Date: Mon, 13 Sep 2021 21:08:24 +0800 Subject: [PATCH 5/6] net: hns3: fix the exception when query imp info When the command for querying imp info is issued to the firmware, if the firmware does not support the command, the returned value of bd num is 0. Add protection mechanism before alloc memory to prevent apply for 0-length memory. Fixes: 0b198b0d80ea ("net: hns3: refactor dump m7 info of debugfs") Signed-off-by: Jiaran Zhang Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c index 68ed1715ac52..87d96f82c318 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c @@ -1724,6 +1724,10 @@ hclge_dbg_get_imp_stats_info(struct hclge_dev *hdev, char *buf, int len) } bd_num = le32_to_cpu(req->bd_num); + if (!bd_num) { + dev_err(&hdev->pdev->dev, "imp statistics bd number is 0!\n"); + return -EINVAL; + } desc_src = kcalloc(bd_num, sizeof(struct hclge_desc), GFP_KERNEL); if (!desc_src) From 427900d27d86b820c559037a984bd403f910860f Mon Sep 17 00:00:00 2001 From: Jiaran Zhang Date: Mon, 13 Sep 2021 21:08:25 +0800 Subject: [PATCH 6/6] net: hns3: fix the timing issue of VF clearing interrupt sources Currently, the VF does not clear the interrupt source immediately after receiving the interrupt. As a result, if the second interrupt task is triggered when processing the first interrupt task, clearing the interrupt source before exiting will clear the interrupt sources of the two tasks at the same time. As a result, no interrupt is triggered for the second task. The VF detects the missed message only when the next interrupt is generated. Clearing it immediately after executing check_evt_cause ensures that: 1. Even if two interrupt tasks are triggered at the same time, they can be processed. 2. If the second task is triggered during the processing of the first task and the interrupt source is not cleared, the interrupt is reported after vector0 is enabled. Fixes: b90fcc5bd904 ("net: hns3: add reset handling for VF when doing Core/Global/IMP reset") Signed-off-by: Jiaran Zhang Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index 82e727020120..a69e892277b3 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -2465,6 +2465,8 @@ static irqreturn_t hclgevf_misc_irq_handle(int irq, void *data) hclgevf_enable_vector(&hdev->misc_vector, false); event_cause = hclgevf_check_evt_cause(hdev, &clearval); + if (event_cause != HCLGEVF_VECTOR0_EVENT_OTHER) + hclgevf_clear_event_cause(hdev, clearval); switch (event_cause) { case HCLGEVF_VECTOR0_EVENT_RST: @@ -2477,10 +2479,8 @@ static irqreturn_t hclgevf_misc_irq_handle(int irq, void *data) break; } - if (event_cause != HCLGEVF_VECTOR0_EVENT_OTHER) { - hclgevf_clear_event_cause(hdev, clearval); + if (event_cause != HCLGEVF_VECTOR0_EVENT_OTHER) hclgevf_enable_vector(&hdev->misc_vector, true); - } return IRQ_HANDLED; }