ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema

Convert the bindings for McASP controllers for TI SoCs from txt
to YAML schema.

Adds additional properties 'clocks', 'clock-names', 'power-domains',
'#sound-dai-cells' and 'port' which were missing from the txt file.
Removes properties 'sram-size-playback' and 'sram-size-capture'
since they are not used.
Adds 'dmas' and 'dma-names' in the example which were missing from
the txt file.
Changes 'interrupts' and 'interrupt-names' from optional to
required properties.
Changes 'op-modes', 'serial-dir' to optional properties as they are
not needed if the McASP is used only as GPIO.
Changes 'tdm-slots' to required property only for I2S operation mode.

Adds the yaml file in the 'MAINTAINERS' under the heading 'TEXAS
INSTRUMENTS ASoC DRIVERS'

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220209063008.2928-1-j-choudhary@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Jayesh Choudhary 2022-02-09 12:00:08 +05:30 committed by Mark Brown
parent 7d88b96081
commit 8be90641a0
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
3 changed files with 202 additions and 86 deletions

View File

@ -1,86 +0,0 @@
Texas Instruments McASP controller
Required properties:
- compatible :
"ti,dm646x-mcasp-audio" : for DM646x platforms
"ti,da830-mcasp-audio" : for both DA830 & DA850 platforms
"ti,am33xx-mcasp-audio" : for AM33xx platforms (AM33xx, AM43xx, TI81xx)
"ti,dra7-mcasp-audio" : for DRA7xx platforms
"ti,omap4-mcasp-audio" : for OMAP4
- reg : Should contain reg specifiers for the entries in the reg-names property.
- reg-names : Should contain:
* "mpu" for the main registers (required). For compatibility with
existing software, it is recommended this is the first entry.
* "dat" for separate data port register access (optional).
- op-mode : I2S/DIT ops mode. 0 for I2S mode. 1 for DIT mode used for S/PDIF,
IEC60958-1, and AES-3 formats.
- tdm-slots : Slots for TDM operation. Indicates number of channels transmitted
or received over one serializer.
- serial-dir : A list of serializer configuration. Each entry is a number
indication for serializer pin direction.
(0 - INACTIVE, 1 - TX, 2 - RX)
- dmas: two element list of DMA controller phandles and DMA request line
ordered pairs.
- dma-names: identifier string for each DMA request line in the dmas property.
These strings correspond 1:1 with the ordered pairs in dmas. The dma
identifiers must be "rx" and "tx".
Optional properties:
- ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0
- tx-num-evt : FIFO levels.
- rx-num-evt : FIFO levels.
- dismod : Specify the drive on TX pin during inactive slots
0 : 3-state
2 : logic low
3 : logic high
Defaults to 'logic low' when the property is not present
- sram-size-playback : size of sram to be allocated during playback
- sram-size-capture : size of sram to be allocated during capture
- interrupts : Interrupt numbers for McASP
- interrupt-names : Known interrupt names are "tx" and "rx"
- pinctrl-0: Should specify pin control group used for this controller.
- pinctrl-names: Should contain only one value - "default", for more details
please refer to pinctrl-bindings.txt
- fck_parent : Should contain a valid clock name which will be used as parent
for the McASP fck
- auxclk-fs-ratio: When McASP is bus master indicates the ratio between AUCLK
and FS rate if applicable:
AUCLK rate = auxclk-fs-ratio * FS rate
Optional GPIO support:
If any McASP pin need to be used as GPIO then the McASP node must have:
...
gpio-controller
#gpio-cells = <2>;
...
When requesting a GPIO, the first parameter is the PIN index in McASP_P*
registers.
For example to request the AXR2 pin of mcasp8:
function-gpios = <&mcasp8 2 0>;
Or to request the ACLKR pin of mcasp8:
function-gpios = <&mcasp8 29 0>;
For generic gpio information, please refer to bindings/gpio/gpio.txt
Example:
mcasp0: mcasp0@1d00000 {
compatible = "ti,da830-mcasp-audio";
reg = <0x100000 0x3000>;
reg-names "mpu";
interrupts = <82>, <83>;
interrupt-names = "tx", "rx";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
serial-dir = <
0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */
0 0 0 0
0 0 0 1
2 0 0 0 >;
tx-num-evt = <1>;
rx-num-evt = <1>;
};

View File

@ -0,0 +1,201 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/davinci-mcasp-audio.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: McASP Controller for TI SoCs
maintainers:
- Jayesh Choudhary <j-choudhary@ti.com>
properties:
compatible:
enum:
- ti,dm646x-mcasp-audio
- ti,da830-mcasp-audio
- ti,am33xx-mcasp-audio
- ti,dra7-mcasp-audio
- ti,omap4-mcasp-audio
reg:
minItems: 1
items:
- description: CFG registers
- description: data registers
reg-names:
minItems: 1
items:
- const: mpu
- const: dat
op-mode:
$ref: /schemas/types.yaml#/definitions/uint32
description: 0 - I2S or 1 - DIT operation mode
enum:
- 0
- 1
tdm-slots:
$ref: /schemas/types.yaml#/definitions/uint32
description:
number of channels over one serializer
the property is ignored in DIT mode
minimum: 2
maximum: 32
serial-dir:
description:
A list of serializer configuration
Entry is indication for serializer pin direction
0 - Inactive, 1 - TX, 2 - RX
All AXR pins should be present in the array even if inactive
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 25
items:
minimum: 0
maximum: 2
dmas:
minItems: 1
items:
- description: transmission DMA channel
- description: reception DMA channel
dma-names:
minItems: 1
items:
- const: tx
- const: rx
ti,hwmods:
$ref: /schemas/types.yaml#/definitions/string
description: Name of hwmod associated with McASP
maxItems: 1
deprecated: true
tx-num-evt:
$ref: /schemas/types.yaml#/definitions/uint32
description:
configures WFIFO threshold
0 disables the FIFO use
if property is missing, then also FIFO use is disabled
rx-num-evt:
$ref: /schemas/types.yaml#/definitions/uint32
description:
configures RFIFO threshold
0 disables the FIFO use
if property is missing, then also FIFO use is disabled
dismod:
$ref: /schemas/types.yaml#/definitions/uint32
description:
specify the drive on TX pin during inactive time slots
0 - 3-state, 2 - logic low, 3 - logic high
enum:
- 0
- 2
- 3
default: 2
interrupts:
anyOf:
- minItems: 1
items:
- description: TX interrupt
- description: RX interrupt
- items:
- description: common/combined interrupt
interrupt-names:
oneOf:
- minItems: 1
items:
- const: tx
- const: rx
- const: common
fck_parent:
$ref: /schemas/types.yaml#/definitions/string
description: parent clock name for McASP fck
maxItems: 1
auxclk-fs-ratio:
$ref: /schemas/types.yaml#/definitions/uint32
description: ratio of AUCLK and FS rate if applicable
gpio-controller: true
"#gpio-cells":
const: 2
clocks:
minItems: 1
items:
- description: functional clock
- description: module specific optional ahclkx clock
- description: module specific optional ahclkr clock
clock-names:
minItems: 1
items:
- const: fck
- const: ahclkx
- const: ahclkr
power-domains:
description: phandle to the corresponding power-domain
maxItems: 1
"#sound-dai-cells":
const: 0
port:
description: connection for when McASP is used via graph card
type: object
required:
- compatible
- reg
- reg-names
- dmas
- dma-names
- interrupts
- interrupt-names
allOf:
- if:
properties:
opmode:
enum:
- 0
then:
required:
- tdm-slots
additionalProperties: false
examples:
- |
mcasp0: mcasp0@1d00000 {
compatible = "ti,da830-mcasp-audio";
reg = <0x100000 0x3000>;
reg-names = "mpu";
interrupts = <82>, <83>;
interrupt-names = "tx", "rx";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
dma-names = "tx", "rx";
serial-dir = <
0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */
0 0 0 0
0 0 0 1
2 0 0 0 >;
tx-num-evt = <1>;
rx-num-evt = <1>;
};

View File

@ -19042,6 +19042,7 @@ TEXAS INSTRUMENTS ASoC DRIVERS
M: Peter Ujfalusi <peter.ujfalusi@gmail.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
F: sound/soc/ti/
TEXAS INSTRUMENTS' DAC7612 DAC DRIVER