mirror of
https://github.com/torvalds/linux.git
synced 2024-11-28 07:01:32 +00:00
serial: 8250_pci: Add WCH CH352 quirk to avoid Xscale detection
The code in 8250.c for detecting ARM/XScale UARTs says: * Try writing and reading the UART_IER_UUE bit (b6). * If it works, this is probably one of the Xscale platform's * internal UARTs. If the above passes, it then goes on to: * It's an Xscale. * We'll leave the UART_IER_UUE bit set to 1 (enabled). However, the CH352 uses the UART_IER_UUE as the LOWPOWER function, so it is readable and writable. According to the datasheet: "LOWPOWER:When the bit is 1, close the internal benchmark clock of serial port to set into low-power status. So it essentially gets mis-detected as Xscale, and gets powered down in the process. The device in question where this was seen is listed by lspci as: Serial controller: Device 4348:3253 (rev 10) (prog-if 02 [16550]) Re-using the 353 quirk which just sets flags to fixed and type to 16550 is suitable for fixing the 352 as well. Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
503bded92d
commit
8b5c913f7e
@ -1554,6 +1554,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
|
||||
#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001
|
||||
#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
|
||||
#define PCI_VENDOR_ID_WCH 0x4348
|
||||
#define PCI_DEVICE_ID_WCH_CH352_2S 0x3253
|
||||
#define PCI_DEVICE_ID_WCH_CH353_4S 0x3453
|
||||
#define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046
|
||||
#define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053
|
||||
@ -2172,6 +2173,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_wch_ch353_setup,
|
||||
},
|
||||
/* WCH CH352 2S card (16550 clone) */
|
||||
{
|
||||
.vendor = PCI_VENDOR_ID_WCH,
|
||||
.device = PCI_DEVICE_ID_WCH_CH352_2S,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.setup = pci_wch_ch353_setup,
|
||||
},
|
||||
/*
|
||||
* ASIX devices with FIFO bug
|
||||
*/
|
||||
@ -4870,6 +4879,10 @@ static struct pci_device_id serial_pci_tbl[] = {
|
||||
PCI_ANY_ID, PCI_ANY_ID,
|
||||
0, 0, pbn_b0_bt_2_115200 },
|
||||
|
||||
{ PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH352_2S,
|
||||
PCI_ANY_ID, PCI_ANY_ID,
|
||||
0, 0, pbn_b0_bt_2_115200 },
|
||||
|
||||
/*
|
||||
* Commtech, Inc. Fastcom adapters
|
||||
*/
|
||||
|
Loading…
Reference in New Issue
Block a user