Merge by hand (whitespace conflicts in libata.h)

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
This commit is contained in:
James Bottomley 2005-11-10 08:29:07 -06:00
commit 8a87a0b631
744 changed files with 49072 additions and 16496 deletions

View File

@ -25,7 +25,7 @@
#include <linux/skbuff.h>
#include <linux/timer.h>
#include "connector.h"
#include <linux/connector.h>
static struct cb_id cn_test_id = { 0x123, 0x456 };
static char cn_test_name[] = "cn_test";
@ -104,7 +104,7 @@ static int cn_test_want_notify(void)
req->first = cn_test_id.val + 20;
req->range = 10;
NETLINK_CB(skb).dst_groups = ctl->group;
NETLINK_CB(skb).dst_group = ctl->group;
//netlink_broadcast(nls, skb, 0, ctl->group, GFP_ATOMIC);
netlink_unicast(nls, skb, 0, 0);

View File

@ -1,5 +1,5 @@
How to get the Nebula, PCTV and Twinhan DST cards working
=========================================================
How to get the Nebula, PCTV, FusionHDTV Lite and Twinhan DST cards working
==========================================================================
This class of cards has a bt878a as the PCI interface, and
require the bttv driver.
@ -26,27 +26,31 @@ Furthermore you need to enable
In general you need to load the bttv driver, which will handle the gpio and
i2c communication for us, plus the common dvb-bt8xx device driver.
The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and
TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver.
The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110), TwinHan (dst),
FusionHDTV DVB-T Lite (mt352) and FusionHDTV5 Lite (lgdt330x) are loaded
automatically by the dvb-bt8xx device driver.
3a) Nebula / Pinnacle PCTV
--------------------------
3a) Nebula / Pinnacle PCTV / FusionHDTV Lite
---------------------------------------------
$ modprobe bttv (normally bttv is being loaded automatically by kmod)
$ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading)
$ modprobe dvb-bt8xx
(or just place dvb-bt8xx in /etc/modules for automatic loading)
3b) TwinHan and Clones
--------------------------
$ modprobe bttv i2c_hw=1 card=0x71
$ modprobe bttv card=0x71
$ modprobe dvb-bt8xx
$ modprobe dst
The value 0x71 will override the PCI type detection for dvb-bt8xx,
which is necessary for TwinHan cards.
which is necessary for TwinHan cards. Omission of this parameter might result
in a system lockup.
If you're having an older card (blue color circuit) and card=0x71 locks
If you're having an older card (blue color PCB) and card=0x71 locks up
your machine, try using 0x68, too. If that does not work, ask on the
mailing list.
@ -64,11 +68,47 @@ verbose=0 means complete disabling of messages
dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card.
0x20 means it has a Conditional Access slot.
The autodected values are determined bythe cards 'response
string' which you can see in your logs e.g.
The autodetected values are determined by the cards 'response string'
which you can see in your logs e.g.
dst_get_device_id: Recognise [DSTMCI]
If you need to sent in bug reports on the dst, please do send in a complete
log with the verbose=4 module parameter. For general usage, the default setting
of verbose=1 is ideal.
4) Multiple cards
--------------------------
If you happen to be running multiple cards, it would be advisable to load
the bttv module with the card id. This would help to solve any module loading
problems that you might face.
For example, if you have a Twinhan and Clones card along with a FusionHDTV5 Lite
$ modprobe bttv card=0x71 card=0x87
Here the order of the card id is important and should be the same as that of the
physical order of the cards. Here card=0x71 represents the Twinhan and clones
and card=0x87 represents Fusion HDTV5 Lite. These arguments can also be
specified in decimal, rather than hex:
$ modprobe bttv card=113 card=135
Some examples of card-id's
Pinnacle Sat 0x5e (94)
Nebula Digi TV 0x68 (104)
PC HDTV 0x70 (112)
Twinhan 0x71 (113)
FusionHDTV DVB-T Lite 0x80 (128)
FusionHDTV5 Lite 0x87 (135)
For a full list of card-id's, see the V4L Documentation within the kernel
source: linux/Documentation/video4linux/CARDLIST.bttv
If you have problems with this please do ask on the mailing list.
--
Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham

View File

@ -41,6 +41,12 @@ o Frontends drivers:
- dib3000mb : DiBcom 3000-MB demodulator
DVB-S/C/T:
- dst : TwinHan DST Frontend
ATSC:
- nxt200x : Nxtwave NXT2002 & NXT2004
- or51211 : or51211 based (pcHDTV HD2000 card)
- or51132 : or51132 based (pcHDTV HD3000 card)
- bcm3510 : Broadcom BCM3510
- lgdt330x : LG Electronics DT3302 & DT3303
o Cards based on the Phillips saa7146 multimedia PCI bridge chip:
@ -62,6 +68,10 @@ o Cards based on the Conexant Bt8xx PCI bridge:
- Nebula Electronics DigiTV
- TwinHan DST
- Avermedia DVB-T
- ChainTech digitop DST-1000 DVB-S
- pcHDTV HD-2000 TV
- DViCO FusionHDTV DVB-T Lite
- DViCO FusionHDTV5 Lite
o Technotrend / Hauppauge DVB USB devices:
- Nova USB
@ -83,3 +93,30 @@ o DiBcom DVB-T USB based devices:
- DiBcom USB2.0 DVB-T reference device (non-public)
o Experimental support for the analog module of the Siemens DVB-C PCI card
o Cards based on the Conexant cx2388x PCI bridge:
- ADS Tech Instant TV DVB-T PCI
- ATI HDTV Wonder
- digitalnow DNTV Live! DVB-T
- DViCO FusionHDTV DVB-T1
- DViCO FusionHDTV DVB-T Plus
- DViCO FusionHDTV3 Gold-Q
- DViCO FusionHDTV3 Gold-T
- DViCO FusionHDTV5 Gold
- Hauppauge Nova-T DVB-T
- KWorld/VStream XPert DVB-T
- pcHDTV HD3000 HDTV
- TerraTec Cinergy 1400 DVB-T
- WinFast DTV1000-T
o Cards based on the Phillips saa7134 PCI bridge:
- Medion 7134
- Pinnacle PCTV 300i DVB-T + PAL
- LifeView FlyDVB-T DUO
- Typhoon DVB-T Duo Digital/Analog Cardbus
- Philips TOUGH DVB-T reference design
- Philips EUROPA V3 reference design
- Compro Videomate DVB-T300
- Compro Videomate DVB-T200
- AVerMedia AVerTVHD MCE A180

View File

@ -75,5 +75,22 @@ Ernst Peinlich <e.peinlich@inode.at>
Peter Beutner <p.beutner@gmx.net>
for the IR code for the ttusb-dec driver
Wilson Michaels <wilsonmichaels@earthlink.net>
for the lgdt330x frontend driver, and various bugfixes
Michael Krufky <mkrufky@m1k.net>
for maintaining v4l/dvb inter-tree dependencies
Taylor Jacob <rtjacob@earthlink.net>
for the nxt2002 frontend driver
Jean-Francois Thibert <jeanfrancois@sagetv.com>
for the nxt2004 frontend driver
Kirk Lapray <kirk.lapray@gmail.com>
for the or51211 and or51132 frontend drivers, and
for merging the nxt2002 and nxt2004 modules into a
single nxt200x frontend driver.
(If you think you should be in this list, but you are not, drop a
line to the DVB mailing list)

View File

@ -22,7 +22,7 @@ use File::Temp qw/ tempdir /;
use IO::Handle;
@components = ( "sp8870", "sp887x", "tda10045", "tda10046", "av7110", "dec2000t",
"dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002",
"dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
"or51211", "or51132_qam", "or51132_vsb");
# Check args
@ -252,6 +252,23 @@ sub nxt2002 {
$outfile;
}
sub nxt2004 {
my $sourcefile = "AVerTVHD_MCE_A180_Drv_v1.2.2.16.zip";
my $url = "http://www.aver.com/support/Drivers/$sourcefile";
my $hash = "111cb885b1e009188346d72acfed024c";
my $outfile = "dvb-fe-nxt2004.fw";
my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
checkstandard();
wgetfile($sourcefile, $url);
unzip($sourcefile, $tmpdir);
verify("$tmpdir/3xHybrid.sys", $hash);
extract("$tmpdir/3xHybrid.sys", 465304, 9584, $outfile);
$outfile;
}
sub or51211 {
my $fwfile = "dvb-fe-or51211.fw";
my $url = "http://linuxtv.org/downloads/firmware/$fwfile";

152
Documentation/fb/fbcon.txt Normal file
View File

@ -0,0 +1,152 @@
The Framebuffer Console
=======================
The framebuffer console (fbcon), as its name implies, is a text
console running on top of the framebuffer device. It has the functionality of
any standard text console driver, such as the VGA console, with the added
features that can be attributed to the graphical nature of the framebuffer.
In the x86 architecture, the framebuffer console is optional, and
some even treat it as a toy. For other architectures, it is the only available
display device, text or graphical.
What are the features of fbcon? The framebuffer console supports
high resolutions, varying font types, display rotation, primitive multihead,
etc. Theoretically, multi-colored fonts, blending, aliasing, and any feature
made available by the underlying graphics card are also possible.
A. Configuration
The framebuffer console can be enabled by using your favorite kernel
configuration tool. It is under Device Drivers->Graphics Support->Support for
framebuffer devices->Framebuffer Console Support. Select 'y' to compile
support statically, or 'm' for module support. The module will be fbcon.
In order for fbcon to activate, at least one framebuffer driver is
required, so choose from any of the numerous drivers available. For x86
systems, they almost universally have VGA cards, so vga16fb and vesafb will
always be available. However, using a chipset-specific driver will give you
more speed and features, such as the ability to change the video mode
dynamically.
To display the penguin logo, choose any logo available in Logo
Configuration->Boot up logo.
Also, you will need to select at least one compiled-in fonts, but if
you don't do anything, the kernel configuration tool will select one for you,
usually an 8x16 font.
GOTCHA: A common bug report is enabling the framebuffer without enabling the
framebuffer console. Depending on the driver, you may get a blanked or
garbled display, but the system still boots to completion. If you are
fortunate to have a driver that does not alter the graphics chip, then you
will still get a VGA console.
B. Loading
Possible scenarios:
1. Driver and fbcon are compiled statically
Usually, fbcon will automatically take over your console. The notable
exception is vesafb. It needs to be explicitly activated with the
vga= boot option parameter.
2. Driver is compiled statically, fbcon is compiled as a module
Depending on the driver, you either get a standard console, or a
garbled display, as mentioned above. To get a framebuffer console,
do a 'modprobe fbcon'.
3. Driver is compiled as a module, fbcon is compiled statically
You get your standard console. Once the driver is loaded with
'modprobe xxxfb', fbcon automatically takes over the console with
the possible exception of using the fbcon=map:n option. See below.
4. Driver and fbcon are compiled as a module.
You can load them in any order. Once both are loaded, fbcon will take
over the console.
C. Boot options
The framebuffer console has several, largely unknown, boot options
that can change its behavior.
1. fbcon=font:<name>
Select the initial font to use. The value 'name' can be any of the
compiled-in fonts: VGA8x16, 7x14, 10x18, VGA8x8, MINI4x6, RomanLarge,
SUN8x16, SUN12x22, ProFont6x11, Acorn8x8, PEARL8x8.
Note, not all drivers can handle font with widths not divisible by 8,
such as vga16fb.
2. fbcon=scrollback:<value>[k]
The scrollback buffer is memory that is used to preserve display
contents that has already scrolled past your view. This is accessed
by using the Shift-PageUp key combination. The value 'value' is any
integer. It defaults to 32KB. The 'k' suffix is optional, and will
multiply the 'value' by 1024.
3. fbcon=map:<0123>
This is an interesting option. It tells which driver gets mapped to
which console. The value '0123' is a sequence that gets repeated until
the total length is 64 which is the number of consoles available. In
the above example, it is expanded to 012301230123... and the mapping
will be:
tty | 1 2 3 4 5 6 7 8 9 ...
fb | 0 1 2 3 0 1 2 3 0 ...
('cat /proc/fb' should tell you what the fb numbers are)
One side effect that may be useful is using a map value that exceeds
the number of loaded fb drivers. For example, if only one driver is
available, fb0, adding fbcon=map:1 tells fbcon not to take over the
console.
Later on, when you want to map the console the to the framebuffer
device, you can use the con2fbmap utility.
4. fbcon=vc:<n1>-<n2>
This option tells fbcon to take over only a range of consoles as
specified by the values 'n1' and 'n2'. The rest of the consoles
outside the given range will still be controlled by the standard
console driver.
NOTE: For x86 machines, the standard console is the VGA console which
is typically located on the same video card. Thus, the consoles that
are controlled by the VGA console will be garbled.
4. fbcon=rotate:<n>
This option changes the orientation angle of the console display. The
value 'n' accepts the following:
0 - normal orientation (0 degree)
1 - clockwise orientation (90 degrees)
2 - upside down orientation (180 degrees)
3 - counterclockwise orientation (270 degrees)
The angle can be changed anytime afterwards by 'echoing' the same
numbers to any one of the 2 attributes found in
/sys/class/graphics/fb{x}
con_rotate - rotate the display of the active console
con_rotate_all - rotate the display of all consoles
Console rotation will only become available if Console Rotation
Support is compiled in your kernel.
NOTE: This is purely console rotation. Any other applications that
use the framebuffer will remain at their 'normal'orientation.
Actually, the underlying fb driver is totally ignorant of console
rotation.
---
Antonino Daplas <adaplas@pol.net>

View File

@ -25,6 +25,13 @@ Who: Adrian Bunk <bunk@stusta.de>
---------------------------
What: drivers depending on OBSOLETE_OSS_DRIVER
When: January 2006
Why: OSS drivers with ALSA replacements
Who: Adrian Bunk <bunk@stusta.de>
---------------------------
What: RCU API moves to EXPORT_SYMBOL_GPL
When: April 2006
Files: include/linux/rcupdate.h, kernel/rcupdate.c
@ -60,6 +67,21 @@ Who: Jody McIntyre <scjody@steamballoon.com>
---------------------------
What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
When: July 2006
Why: V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
series. The old API have lots of drawbacks and don't provide enough
means to work with all video and audio standards. The newer API is
already available on the main drivers and should be used instead.
Newer drivers should use v4l_compat_translate_ioctl function to handle
old calls, replacing to newer ones.
Decoder iocts are using internally to allow video drivers to
communicate with video decoders. This should also be improved to allow
V4L2 calls being translated into compatible internal ioctls.
Who: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
---------------------------
What: i2c sysfs name change: in1_ref, vid deprecated in favour of cpu0_vid
When: November 2005
Files: drivers/i2c/chips/adm1025.c, drivers/i2c/chips/adm1026.c
@ -111,3 +133,10 @@ Why: This interface has been obsoleted by the new layer3-independent
to link against API-compatible library on top of libnfnetlink_queue
instead of the current 'libipq'.
Who: Harald Welte <laforge@netfilter.org>
---------------------------
What: EXPORT_SYMBOL(lookup_hash)
When: January 2006
Why: Too low-level interface. Use lookup_one_len or lookup_create instead.
Who: Christoph Hellwig <hch@lst.de>

View File

@ -17,8 +17,6 @@ set using tune2fs(8). Kernel-determined defaults are indicated by (*).
bsddf (*) Makes `df' act like BSD.
minixdf Makes `df' act like Minix.
check Check block and inode bitmaps at mount time
(requires CONFIG_EXT2_CHECK).
check=none, nocheck (*) Don't do extra checking of bitmaps on mount
(check=normal and check=strict options removed)

View File

@ -7,12 +7,10 @@ Supported adapters:
* VIA Technologies, Inc. VT82C686A/B
Datasheet: Sometimes available at the VIA website
* VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237
Datasheet: available on request from Via
* VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237R
Datasheet: available on request from VIA
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
Jean Delvare <khali@linux-fr.org>

View File

@ -412,7 +412,7 @@ For now, you can ignore the `flags' parameter. It is there for future use.
release_region(address,FOO_EXTENT);
/* SENSORS ONLY END */
ERROR1:
kfree(new_client);
kfree(data);
ERROR0:
return err;
}
@ -443,7 +443,7 @@ much simpler than the attachment code, fortunately!
release_region(client->addr,LM78_EXTENT);
/* HYBRID SENSORS CHIP ONLY END */
kfree(data);
kfree(i2c_get_clientdata(client));
return 0;
}

View File

@ -116,3 +116,122 @@ and it's role in the array.
Once started with RUN_ARRAY, uninitialized spares can be added with
HOT_ADD_DISK.
MD devices in sysfs
-------------------
md devices appear in sysfs (/sys) as regular block devices,
e.g.
/sys/block/md0
Each 'md' device will contain a subdirectory called 'md' which
contains further md-specific information about the device.
All md devices contain:
level
a text file indicating the 'raid level'. This may be a standard
numerical level prefixed by "RAID-" - e.g. "RAID-5", or some
other name such as "linear" or "multipath".
If no raid level has been set yet (array is still being
assembled), this file will be empty.
raid_disks
a text file with a simple number indicating the number of devices
in a fully functional array. If this is not yet known, the file
will be empty. If an array is being resized (not currently
possible) this will contain the larger of the old and new sizes.
As component devices are added to an md array, they appear in the 'md'
directory as new directories named
dev-XXX
where XXX is a name that the kernel knows for the device, e.g. hdb1.
Each directory contains:
block
a symlink to the block device in /sys/block, e.g.
/sys/block/md0/md/dev-hdb1/block -> ../../../../block/hdb/hdb1
super
A file containing an image of the superblock read from, or
written to, that device.
state
A file recording the current state of the device in the array
which can be a comma separated list of
faulty - device has been kicked from active use due to
a detected fault
in_sync - device is a fully in-sync member of the array
spare - device is working, but not a full member.
This includes spares that are in the process
of being recoverred to
This list make grow in future.
An active md device will also contain and entry for each active device
in the array. These are named
rdNN
where 'NN' is the possition in the array, starting from 0.
So for a 3 drive array there will be rd0, rd1, rd2.
These are symbolic links to the appropriate 'dev-XXX' entry.
Thus, for example,
cat /sys/block/md*/md/rd*/state
will show 'in_sync' on every line.
Active md devices for levels that support data redundancy (1,4,5,6)
also have
sync_action
a text file that can be used to monitor and control the rebuild
process. It contains one word which can be one of:
resync - redundancy is being recalculated after unclean
shutdown or creation
recover - a hot spare is being built to replace a
failed/missing device
idle - nothing is happening
check - A full check of redundancy was requested and is
happening. This reads all block and checks
them. A repair may also happen for some raid
levels.
repair - A full check and repair is happening. This is
similar to 'resync', but was requested by the
user, and the write-intent bitmap is NOT used to
optimise the process.
This file is writable, and each of the strings that could be
read are meaningful for writing.
'idle' will stop an active resync/recovery etc. There is no
guarantee that another resync/recovery may not be automatically
started again, though some event will be needed to trigger
this.
'resync' or 'recovery' can be used to restart the
corresponding operation if it was stopped with 'idle'.
'check' and 'repair' will start the appropriate process
providing the current state is 'idle'.
mismatch_count
When performing 'check' and 'repair', and possibly when
performing 'resync', md will count the number of errors that are
found. The count in 'mismatch_cnt' is the number of sectors
that were re-written, or (for 'check') would have been
re-written. As most raid levels work in units of pages rather
than sectors, this my be larger than the number of actual errors
by a factor of the number of sectors in a page.
Each active md device may also have attributes specific to the
personality module that manages it.
These are specific to the implementation of the module and could
change substantially if the implementation changes.
These currently include
stripe_cache_size (currently raid5 only)
number of entries in the stripe cache. This is writable, but
there are upper and lower limits (32768, 16). Default is 128.
strip_cache_active (currently raid5 only)
number of active entries in the stripe cache

View File

@ -1,27 +1,82 @@
===========================
Intel(R) PRO/Wireless 2100 Network Connection Driver for Linux
Intel(R) PRO/Wireless 2100 Driver for Linux in support of:
Intel(R) PRO/Wireless 2100 Network Connection
Copyright (C) 2003-2005, Intel Corporation
README.ipw2100
March 14, 2005
Version: 1.1.3
Date : October 17, 2005
===========================
Index
---------------------------
0. Introduction
1. Release 1.1.0 Current Features
2. Command Line Parameters
3. Sysfs Helper Files
4. Radio Kill Switch
5. Dynamic Firmware
6. Power Management
7. Support
8. License
-----------------------------------------------
0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER
1. Introduction
2. Release 1.1.3 Current Features
3. Command Line Parameters
4. Sysfs Helper Files
5. Radio Kill Switch
6. Dynamic Firmware
7. Power Management
8. Support
9. License
===========================
0. Introduction
------------ ----- ----- ---- --- -- -
0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER
-----------------------------------------------
Important Notice FOR ALL USERS OR DISTRIBUTORS!!!!
Intel wireless LAN adapters are engineered, manufactured, tested, and
quality checked to ensure that they meet all necessary local and
governmental regulatory agency requirements for the regions that they
are designated and/or marked to ship into. Since wireless LANs are
generally unlicensed devices that share spectrum with radars,
satellites, and other licensed and unlicensed devices, it is sometimes
necessary to dynamically detect, avoid, and limit usage to avoid
interference with these devices. In many instances Intel is required to
provide test data to prove regional and local compliance to regional and
governmental regulations before certification or approval to use the
product is granted. Intel's wireless LAN's EEPROM, firmware, and
software driver are designed to carefully control parameters that affect
radio operation and to ensure electromagnetic compliance (EMC). These
parameters include, without limitation, RF power, spectrum usage,
channel scanning, and human exposure.
For these reasons Intel cannot permit any manipulation by third parties
of the software provided in binary format with the wireless WLAN
adapters (e.g., the EEPROM and firmware). Furthermore, if you use any
patches, utilities, or code with the Intel wireless LAN adapters that
have been manipulated by an unauthorized party (i.e., patches,
utilities, or code (including open source code modifications) which have
not been validated by Intel), (i) you will be solely responsible for
ensuring the regulatory compliance of the products, (ii) Intel will bear
no liability, under any theory of liability for any issues associated
with the modified products, including without limitation, claims under
the warranty and/or issues arising from regulatory non-compliance, and
(iii) Intel will not provide or be required to assist in providing
support to any third parties for such modified products.
Note: Many regulatory agencies consider Wireless LAN adapters to be
modules, and accordingly, condition system-level regulatory approval
upon receipt and review of test data documenting that the antennas and
system configuration do not cause the EMC and radio operation to be
non-compliant.
The drivers available for download from SourceForge are provided as a
part of a development project. Conformance to local regulatory
requirements is the responsibility of the individual developer. As
such, if you are interested in deploying or shipping a driver as part of
solution intended to be used for purposes other than development, please
obtain a tested driver from Intel Customer Support at:
http://support.intel.com/support/notebook/sb/CS-006408.htm
1. Introduction
-----------------------------------------------
This document provides a brief overview of the features supported by the
IPW2100 driver project. The main project website, where the latest
@ -34,9 +89,8 @@ potential fixes and patches, as well as links to the development mailing list
for the driver project.
===========================
1. Release 1.1.0 Current Supported Features
---------------------------
2. Release 1.1.3 Current Supported Features
-----------------------------------------------
- Managed (BSS) and Ad-Hoc (IBSS)
- WEP (shared key and open)
- Wireless Tools support
@ -51,9 +105,8 @@ on the amount of validation and interoperability testing that has been
performed on a given feature.
===========================
2. Command Line Parameters
---------------------------
3. Command Line Parameters
-----------------------------------------------
If the driver is built as a module, the following optional parameters are used
by entering them on the command line with the modprobe command using this
@ -75,9 +128,9 @@ associate boolean associate=0 /* Do NOT auto associate */
disable boolean disable=1 /* Do not power the HW */
===========================
3. Sysfs Helper Files
4. Sysfs Helper Files
---------------------------
-----------------------------------------------
There are several ways to control the behavior of the driver. Many of the
general capabilities are exposed through the Wireless Tools (iwconfig). There
@ -120,9 +173,8 @@ For the device level files, see /sys/bus/pci/drivers/ipw2100:
based RF kill from ON -> OFF -> ON, the radio will NOT come back on
===========================
4. Radio Kill Switch
---------------------------
5. Radio Kill Switch
-----------------------------------------------
Most laptops provide the ability for the user to physically disable the radio.
Some vendors have implemented this as a physical switch that requires no
software to turn the radio off and on. On other laptops, however, the switch
@ -134,9 +186,8 @@ See the Sysfs helper file 'rf_kill' for determining the state of the RF switch
on your system.
===========================
5. Dynamic Firmware
---------------------------
6. Dynamic Firmware
-----------------------------------------------
As the firmware is licensed under a restricted use license, it can not be
included within the kernel sources. To enable the IPW2100 you will need a
firmware image to load into the wireless NIC's processors.
@ -146,9 +197,8 @@ You can obtain these images from <http://ipw2100.sf.net/firmware.php>.
See INSTALL for instructions on installing the firmware.
===========================
6. Power Management
---------------------------
7. Power Management
-----------------------------------------------
The IPW2100 supports the configuration of the Power Save Protocol
through a private wireless extension interface. The IPW2100 supports
the following different modes:
@ -200,9 +250,8 @@ xxxx/yyyy will be replaced with 'off' -- the level reported will be the active
level if `iwconfig eth1 power on` is invoked.
===========================
7. Support
---------------------------
8. Support
-----------------------------------------------
For general development information and support,
go to:
@ -218,9 +267,8 @@ For installation support on the ipw2100 1.1.0 driver on Linux kernels
http://supportmail.intel.com
===========================
8. License
---------------------------
9. License
-----------------------------------------------
Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.

View File

@ -1,33 +1,89 @@
Intel(R) PRO/Wireless 2915ABG Driver for Linux in support of:
Intel(R) PRO/Wireless 2200BG Network Connection
Intel(R) PRO/Wireless 2915ABG Network Connection
Intel(R) PRO/Wireless 2200BG Network Connection
Intel(R) PRO/Wireless 2915ABG Network Connection
Note: The Intel(R) PRO/Wireless 2915ABG Driver for Linux and Intel(R)
PRO/Wireless 2200BG Driver for Linux is a unified driver that works on
both hardware adapters listed above. In this document the Intel(R)
PRO/Wireless 2915ABG Driver for Linux will be used to reference the
Note: The Intel(R) PRO/Wireless 2915ABG Driver for Linux and Intel(R)
PRO/Wireless 2200BG Driver for Linux is a unified driver that works on
both hardware adapters listed above. In this document the Intel(R)
PRO/Wireless 2915ABG Driver for Linux will be used to reference the
unified driver.
Copyright (C) 2004-2005, Intel Corporation
README.ipw2200
Version: 1.0.0
Date : January 31, 2005
Version: 1.0.8
Date : October 20, 2005
Index
-----------------------------------------------
0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER
1. Introduction
1.1. Overview of features
1.2. Module parameters
1.3. Wireless Extension Private Methods
1.4. Sysfs Helper Files
2. About the Version Numbers
3. Support
4. License
2. Ad-Hoc Networking
3. Interacting with Wireless Tools
3.1. iwconfig mode
4. About the Version Numbers
5. Firmware installation
6. Support
7. License
0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER
-----------------------------------------------
Important Notice FOR ALL USERS OR DISTRIBUTORS!!!!
Intel wireless LAN adapters are engineered, manufactured, tested, and
quality checked to ensure that they meet all necessary local and
governmental regulatory agency requirements for the regions that they
are designated and/or marked to ship into. Since wireless LANs are
generally unlicensed devices that share spectrum with radars,
satellites, and other licensed and unlicensed devices, it is sometimes
necessary to dynamically detect, avoid, and limit usage to avoid
interference with these devices. In many instances Intel is required to
provide test data to prove regional and local compliance to regional and
governmental regulations before certification or approval to use the
product is granted. Intel's wireless LAN's EEPROM, firmware, and
software driver are designed to carefully control parameters that affect
radio operation and to ensure electromagnetic compliance (EMC). These
parameters include, without limitation, RF power, spectrum usage,
channel scanning, and human exposure.
For these reasons Intel cannot permit any manipulation by third parties
of the software provided in binary format with the wireless WLAN
adapters (e.g., the EEPROM and firmware). Furthermore, if you use any
patches, utilities, or code with the Intel wireless LAN adapters that
have been manipulated by an unauthorized party (i.e., patches,
utilities, or code (including open source code modifications) which have
not been validated by Intel), (i) you will be solely responsible for
ensuring the regulatory compliance of the products, (ii) Intel will bear
no liability, under any theory of liability for any issues associated
with the modified products, including without limitation, claims under
the warranty and/or issues arising from regulatory non-compliance, and
(iii) Intel will not provide or be required to assist in providing
support to any third parties for such modified products.
Note: Many regulatory agencies consider Wireless LAN adapters to be
modules, and accordingly, condition system-level regulatory approval
upon receipt and review of test data documenting that the antennas and
system configuration do not cause the EMC and radio operation to be
non-compliant.
The drivers available for download from SourceForge are provided as a
part of a development project. Conformance to local regulatory
requirements is the responsibility of the individual developer. As
such, if you are interested in deploying or shipping a driver as part of
solution intended to be used for purposes other than development, please
obtain a tested driver from Intel Customer Support at:
http://support.intel.com/support/notebook/sb/CS-006408.htm
1. Introduction
@ -45,7 +101,7 @@ file.
1.1. Overview of Features
-----------------------------------------------
The current release (1.0.0) supports the following features:
The current release (1.0.8) supports the following features:
+ BSS mode (Infrastructure, Managed)
+ IBSS mode (Ad-Hoc)
@ -56,17 +112,27 @@ The current release (1.0.0) supports the following features:
+ Full A rate support (2915 only)
+ Transmit power control
+ S state support (ACPI suspend/resume)
The following features are currently enabled, but not officially
supported:
+ WPA
+ long/short preamble support
+ Monitor mode (aka RFMon)
The distinction between officially supported and enabled is a reflection
on the amount of validation and interoperability testing that has been
performed on a given feature.
1.2. Command Line Parameters
-----------------------------------------------
Like many modules used in the Linux kernel, the Intel(R) PRO/Wireless
2915ABG Driver for Linux allows certain configuration options to be
provided as module parameters. The most common way to specify a module
parameter is via the command line.
Like many modules used in the Linux kernel, the Intel(R) PRO/Wireless
2915ABG Driver for Linux allows configuration options to be provided
as module parameters. The most common way to specify a module parameter
is via the command line.
The general form is:
@ -96,14 +162,18 @@ Where the supported parameter are:
debug
If using a debug build, this is used to control the amount of debug
info is logged. See the 'dval' and 'load' script for more info on
how to use this (the dval and load scripts are provided as part
info is logged. See the 'dvals' and 'load' script for more info on
how to use this (the dvals and load scripts are provided as part
of the ipw2200 development snapshot releases available from the
SourceForge project at http://ipw2200.sf.net)
led
Can be used to turn on experimental LED code.
0 = Off, 1 = On. Default is 0.
mode
Can be used to set the default mode of the adapter.
0 = Managed, 1 = Ad-Hoc
0 = Managed, 1 = Ad-Hoc, 2 = Monitor
1.3. Wireless Extension Private Methods
@ -164,8 +234,8 @@ The supported private methods are:
-----------------------------------------------
The Linux kernel provides a pseudo file system that can be used to
access various components of the operating system. The Intel(R)
PRO/Wireless 2915ABG Driver for Linux exposes several configuration
access various components of the operating system. The Intel(R)
PRO/Wireless 2915ABG Driver for Linux exposes several configuration
parameters through this mechanism.
An entry in the sysfs can support reading and/or writing. You can
@ -184,13 +254,13 @@ You can set the debug level via:
Where $VALUE would be a number in the case of this sysfs entry. The
input to sysfs files does not have to be a number. For example, the
firmware loader used by hotplug utilizes sysfs entries for transferring
firmware loader used by hotplug utilizes sysfs entries for transfering
the firmware image from user space into the driver.
The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries
at two levels -- driver level, which apply to all instances of the
driver (in the event that there are more than one device installed) and
device level, which applies only to the single specific instance.
at two levels -- driver level, which apply to all instances of the driver
(in the event that there are more than one device installed) and device
level, which applies only to the single specific instance.
1.4.1 Driver Level Sysfs Helper Files
@ -203,6 +273,7 @@ For the driver level files, look in /sys/bus/pci/drivers/ipw2200/
This controls the same global as the 'debug' module parameter
1.4.2 Device Level Sysfs Helper Files
-----------------------------------------------
@ -213,7 +284,7 @@ For the device level files, look in
For example:
/sys/bus/pci/drivers/ipw2200/0000:02:01.0
For the device level files, see /sys/bus/pci/[drivers/ipw2200:
For the device level files, see /sys/bus/pci/drivers/ipw2200:
rf_kill
read -
@ -231,8 +302,59 @@ For the device level files, see /sys/bus/pci/[drivers/ipw2200:
ucode
read-only access to the ucode version number
led
read -
0 = LED code disabled
1 = LED code enabled
write -
0 = Disable LED code
1 = Enable LED code
2. About the Version Numbers
NOTE: The LED code has been reported to hang some systems when
running ifconfig and is therefore disabled by default.
2. Ad-Hoc Networking
-----------------------------------------------
When using a device in an Ad-Hoc network, it is useful to understand the
sequence and requirements for the driver to be able to create, join, or
merge networks.
The following attempts to provide enough information so that you can
have a consistent experience while using the driver as a member of an
Ad-Hoc network.
2.1. Joining an Ad-Hoc Network
-----------------------------------------------
The easiest way to get onto an Ad-Hoc network is to join one that
already exists.
2.2. Creating an Ad-Hoc Network
-----------------------------------------------
An Ad-Hoc networks is created using the syntax of the Wireless tool.
For Example:
iwconfig eth1 mode ad-hoc essid testing channel 2
2.3. Merging Ad-Hoc Networks
-----------------------------------------------
3. Interaction with Wireless Tools
-----------------------------------------------
3.1 iwconfig mode
-----------------------------------------------
When configuring the mode of the adapter, all run-time configured parameters
are reset to the value used when the module was loaded. This includes
channels, rates, ESSID, etc.
4. About the Version Numbers
-----------------------------------------------
Due to the nature of open source development projects, there are
@ -259,12 +381,23 @@ available as quickly as possible, unknown anomalies should be expected.
The major version number will be incremented when significant changes
are made to the driver. Currently, there are no major changes planned.
5. Firmware installation
----------------------------------------------
3. Support
The driver requires a firmware image, download it and extract the
files under /lib/firmware (or wherever your hotplug's firmware.agent
will look for firmware files)
The firmware can be downloaded from the following URL:
http://ipw2200.sf.net/
6. Support
-----------------------------------------------
For installation support of the 1.0.0 version, you can contact
http://supportmail.intel.com, or you can use the open source project
For direct support of the 1.0.0 version, you can contact
http://supportmail.intel.com, or you can use the open source project
support.
For general information and support, go to:
@ -272,7 +405,7 @@ For general information and support, go to:
http://ipw2200.sf.net/
4. License
7. License
-----------------------------------------------
Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.
@ -297,4 +430,3 @@ For general information and support, go to:
James P. Ketrenos <ipw2100-admin@linux.intel.com>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497

View File

@ -871,7 +871,7 @@ by playing with the --adjust-vma parameter to objdump.
extern inline void spin_lock(spinlock_t *lp)
static inline void spin_lock(spinlock_t *lp)
{
a0: 18 34 lr %r3,%r4
a2: a7 3a 03 bc ahi %r3,956

View File

@ -0,0 +1,89 @@
CPU Scheduler implementation hints for architecture specific code
Nick Piggin, 2005
Context switch
==============
1. Runqueue locking
By default, the switch_to arch function is called with the runqueue
locked. This is usually not a problem unless switch_to may need to
take the runqueue lock. This is usually due to a wake up operation in
the context switch. See include/asm-ia64/system.h for an example.
To request the scheduler call switch_to with the runqueue unlocked,
you must `#define __ARCH_WANT_UNLOCKED_CTXSW` in a header file
(typically the one where switch_to is defined).
Unlocked context switches introduce only a very minor performance
penalty to the core scheduler implementation in the CONFIG_SMP case.
2. Interrupt status
By default, the switch_to arch function is called with interrupts
disabled. Interrupts may be enabled over the call if it is likely to
introduce a significant interrupt latency by adding the line
`#define __ARCH_WANT_INTERRUPTS_ON_CTXSW` in the same place as for
unlocked context switches. This define also implies
`__ARCH_WANT_UNLOCKED_CTXSW`. See include/asm-arm/system.h for an
example.
CPU idle
========
Your cpu_idle routines need to obey the following rules:
1. Preempt should now disabled over idle routines. Should only
be enabled to call schedule() then disabled again.
2. need_resched/TIF_NEED_RESCHED is only ever set, and will never
be cleared until the running task has called schedule(). Idle
threads need only ever query need_resched, and may never set or
clear it.
3. When cpu_idle finds (need_resched() == 'true'), it should call
schedule(). It should not call schedule() otherwise.
4. The only time interrupts need to be disabled when checking
need_resched is if we are about to sleep the processor until
the next interrupt (this doesn't provide any protection of
need_resched, it prevents losing an interrupt).
4a. Common problem with this type of sleep appears to be:
local_irq_disable();
if (!need_resched()) {
local_irq_enable();
*** resched interrupt arrives here ***
__asm__("sleep until next interrupt");
}
5. TIF_POLLING_NRFLAG can be set by idle routines that do not
need an interrupt to wake them up when need_resched goes high.
In other words, they must be periodically polling need_resched,
although it may be reasonable to do some background work or enter
a low CPU priority.
5a. If TIF_POLLING_NRFLAG is set, and we do decide to enter
an interrupt sleep, it needs to be cleared then a memory
barrier issued (followed by a test of need_resched with
interrupts disabled, as explained in 3).
arch/i386/kernel/process.c has examples of both polling and
sleeping idle functions.
Possible arch/ problems
=======================
Possible arch problems I found (and either tried to fix or didn't):
h8300 - Is such sleeping racy vs interrupts? (See #4a).
The H8/300 manual I found indicates yes, however disabling IRQs
over the sleep mean only NMIs can wake it up, so can't fix easily
without doing spin waiting.
ia64 - is safe_halt call racy vs interrupts? (does it sleep?) (See #4a)
sh64 - Is sleeping racy vs interrupts? (See #4a)
sparc - IRQs on at this point(?), change local_irq_save to _disable.
- TODO: needs secondary CPUs to disable preempt (See #1)

View File

@ -8,7 +8,7 @@ V4L original API</a>
</td><td>
Obsoleted by V4L2 API
</td></tr><tr><td>
<A HREF=http://www.linuxtv.org/downloads/video4linux/API/V4L2_API.html>
<A HREF=http://www.linuxtv.org/downloads/video4linux/API/V4L2_API>
V4L2 API</a>
</td><td>
Should be used for new projects

View File

@ -1,137 +1,142 @@
card=0 - *** UNKNOWN/GENERIC ***
card=1 - MIRO PCTV
card=2 - Hauppauge (bt848)
card=3 - STB, Gateway P/N 6000699 (bt848)
card=4 - Intel Create and Share PCI/ Smart Video Recorder III
card=5 - Diamond DTV2000
card=6 - AVerMedia TVPhone
card=7 - MATRIX-Vision MV-Delta
card=8 - Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26
card=9 - IMS/IXmicro TurboTV
card=10 - Hauppauge (bt878)
card=11 - MIRO PCTV pro
card=12 - ADS Technologies Channel Surfer TV (bt848)
card=13 - AVerMedia TVCapture 98
card=14 - Aimslab Video Highway Xtreme (VHX)
card=15 - Zoltrix TV-Max
card=16 - Prolink Pixelview PlayTV (bt878)
card=17 - Leadtek WinView 601
card=18 - AVEC Intercapture
card=19 - Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)
card=20 - CEI Raffles Card
card=21 - Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50
card=22 - Askey CPH050/ Phoebe Tv Master + FM
card=23 - Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878
card=24 - Askey CPH05X/06X (bt878) [many vendors]
card=25 - Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar
card=26 - Hauppauge WinCam newer (bt878)
card=27 - Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50
card=28 - Terratec TerraTV+ Version 1.1 (bt878)
card=29 - Imagenation PXC200
card=30 - Lifeview FlyVideo 98 LR50
card=31 - Formac iProTV, Formac ProTV I (bt848)
card=32 - Intel Create and Share PCI/ Smart Video Recorder III
card=33 - Terratec TerraTValue Version Bt878
card=34 - Leadtek WinFast 2000/ WinFast 2000 XP
card=35 - Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II
card=36 - Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner
card=37 - Prolink PixelView PlayTV pro
card=38 - Askey CPH06X TView99
card=39 - Pinnacle PCTV Studio/Rave
card=40 - STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100
card=41 - AVerMedia TVPhone 98
card=42 - ProVideo PV951
card=43 - Little OnAir TV
card=44 - Sigma TVII-FM
card=45 - MATRIX-Vision MV-Delta 2
card=46 - Zoltrix Genie TV/FM
card=47 - Terratec TV/Radio+
card=48 - Askey CPH03x/ Dynalink Magic TView
card=49 - IODATA GV-BCTV3/PCI
card=50 - Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP
card=51 - Eagle Wireless Capricorn2 (bt878A)
card=52 - Pinnacle PCTV Studio Pro
card=53 - Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS
card=54 - Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]
card=55 - Askey CPH031/ BESTBUY Easy TV
card=56 - Lifeview FlyVideo 98FM LR50
card=57 - GrandTec 'Grand Video Capture' (Bt848)
card=58 - Askey CPH060/ Phoebe TV Master Only (No FM)
card=59 - Askey CPH03x TV Capturer
card=60 - Modular Technology MM100PCTV
card=61 - AG Electronics GMV1
card=62 - Askey CPH061/ BESTBUY Easy TV (bt878)
card=63 - ATI TV-Wonder
card=64 - ATI TV-Wonder VE
card=65 - Lifeview FlyVideo 2000S LR90
card=66 - Terratec TValueRadio
card=67 - IODATA GV-BCTV4/PCI
card=68 - 3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)
card=69 - Active Imaging AIMMS
card=70 - Prolink Pixelview PV-BT878P+ (Rev.4C,8E)
card=71 - Lifeview FlyVideo 98EZ (capture only) LR51
card=72 - Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)
card=73 - Sensoray 311
card=74 - RemoteVision MX (RV605)
card=75 - Powercolor MTV878/ MTV878R/ MTV878F
card=76 - Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)
card=77 - GrandTec Multi Capture Card (Bt878)
card=78 - Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF
card=79 - DSP Design TCVIDEO
card=80 - Hauppauge WinTV PVR
card=81 - IODATA GV-BCTV5/PCI
card=82 - Osprey 100/150 (878)
card=83 - Osprey 100/150 (848)
card=84 - Osprey 101 (848)
card=85 - Osprey 101/151
card=86 - Osprey 101/151 w/ svid
card=87 - Osprey 200/201/250/251
card=88 - Osprey 200/250
card=89 - Osprey 210/220
card=90 - Osprey 500
card=91 - Osprey 540
card=92 - Osprey 2000
card=93 - IDS Eagle
card=94 - Pinnacle PCTV Sat
card=95 - Formac ProTV II (bt878)
card=96 - MachTV
card=97 - Euresys Picolo
card=98 - ProVideo PV150
card=99 - AD-TVK503
card=100 - Hercules Smart TV Stereo
card=101 - Pace TV & Radio Card
card=102 - IVC-200
card=103 - Grand X-Guard / Trust 814PCI
card=104 - Nebula Electronics DigiTV
card=105 - ProVideo PV143
card=106 - PHYTEC VD-009-X1 MiniDIN (bt878)
card=107 - PHYTEC VD-009-X1 Combi (bt878)
card=108 - PHYTEC VD-009 MiniDIN (bt878)
card=109 - PHYTEC VD-009 Combi (bt878)
card=110 - IVC-100
card=111 - IVC-120G
card=112 - pcHDTV HD-2000 TV
card=113 - Twinhan DST + clones
card=114 - Winfast VC100
card=115 - Teppro TEV-560/InterVision IV-560
card=116 - SIMUS GVC1100
card=117 - NGS NGSTV+
card=118 - LMLBT4
card=119 - Tekram M205 PRO
card=120 - Conceptronic CONTVFMi
card=121 - Euresys Picolo Tetra
card=122 - Spirit TV Tuner
card=123 - AVerMedia AVerTV DVB-T 771
card=124 - AverMedia AverTV DVB-T 761
card=125 - MATRIX Vision Sigma-SQ
card=126 - MATRIX Vision Sigma-SLC
card=127 - APAC Viewcomp 878(AMAX)
card=128 - DViCO FusionHDTV DVB-T Lite
card=129 - V-Gear MyVCD
card=130 - Super TV Tuner
card=131 - Tibet Systems 'Progress DVR' CS16
card=132 - Kodicom 4400R (master)
card=133 - Kodicom 4400R (slave)
card=134 - Adlink RTV24
card=135 - DViCO FusionHDTV 5 Lite
card=136 - Acorp Y878F
0 -> *** UNKNOWN/GENERIC ***
1 -> MIRO PCTV
2 -> Hauppauge (bt848)
3 -> STB, Gateway P/N 6000699 (bt848)
4 -> Intel Create and Share PCI/ Smart Video Recorder III
5 -> Diamond DTV2000
6 -> AVerMedia TVPhone
7 -> MATRIX-Vision MV-Delta
8 -> Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26
9 -> IMS/IXmicro TurboTV
10 -> Hauppauge (bt878) [0070:13eb,0070:3900,2636:10b4]
11 -> MIRO PCTV pro
12 -> ADS Technologies Channel Surfer TV (bt848)
13 -> AVerMedia TVCapture 98 [1461:0002,1461:0004,1461:0300]
14 -> Aimslab Video Highway Xtreme (VHX)
15 -> Zoltrix TV-Max [a1a0:a0fc]
16 -> Prolink Pixelview PlayTV (bt878)
17 -> Leadtek WinView 601
18 -> AVEC Intercapture
19 -> Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)
20 -> CEI Raffles Card
21 -> Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50
22 -> Askey CPH050/ Phoebe Tv Master + FM [14ff:3002]
23 -> Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878 [14c7:0101]
24 -> Askey CPH05X/06X (bt878) [many vendors] [144f:3002,144f:3005,144f:5000,14ff:3000]
25 -> Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar
26 -> Hauppauge WinCam newer (bt878)
27 -> Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50
28 -> Terratec TerraTV+ Version 1.1 (bt878) [153b:1127,1852:1852]
29 -> Imagenation PXC200 [1295:200a]
30 -> Lifeview FlyVideo 98 LR50 [1f7f:1850]
31 -> Formac iProTV, Formac ProTV I (bt848)
32 -> Intel Create and Share PCI/ Smart Video Recorder III
33 -> Terratec TerraTValue Version Bt878 [153b:1117,153b:1118,153b:1119,153b:111a,153b:1134,153b:5018]
34 -> Leadtek WinFast 2000/ WinFast 2000 XP [107d:6606,107d:6609,6606:217d,f6ff:fff6]
35 -> Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II [1851:1850,1851:a050]
36 -> Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner [1852:1852]
37 -> Prolink PixelView PlayTV pro
38 -> Askey CPH06X TView99 [144f:3000,144f:a005,a04f:a0fc]
39 -> Pinnacle PCTV Studio/Rave [11bd:0012,bd11:1200,bd11:ff00,11bd:ff12]
40 -> STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100 [10b4:2636,10b4:2645,121a:3060]
41 -> AVerMedia TVPhone 98 [1461:0001,1461:0003]
42 -> ProVideo PV951 [aa0c:146c]
43 -> Little OnAir TV
44 -> Sigma TVII-FM
45 -> MATRIX-Vision MV-Delta 2
46 -> Zoltrix Genie TV/FM [15b0:4000,15b0:400a,15b0:400d,15b0:4010,15b0:4016]
47 -> Terratec TV/Radio+ [153b:1123]
48 -> Askey CPH03x/ Dynalink Magic TView
49 -> IODATA GV-BCTV3/PCI [10fc:4020]
50 -> Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP
51 -> Eagle Wireless Capricorn2 (bt878A)
52 -> Pinnacle PCTV Studio Pro
53 -> Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS
54 -> Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]
55 -> Askey CPH031/ BESTBUY Easy TV
56 -> Lifeview FlyVideo 98FM LR50 [a051:41a0]
57 -> GrandTec 'Grand Video Capture' (Bt848) [4344:4142]
58 -> Askey CPH060/ Phoebe TV Master Only (No FM)
59 -> Askey CPH03x TV Capturer
60 -> Modular Technology MM100PCTV
61 -> AG Electronics GMV1 [15cb:0101]
62 -> Askey CPH061/ BESTBUY Easy TV (bt878)
63 -> ATI TV-Wonder [1002:0001]
64 -> ATI TV-Wonder VE [1002:0003]
65 -> Lifeview FlyVideo 2000S LR90
66 -> Terratec TValueRadio [153b:1135,153b:ff3b]
67 -> IODATA GV-BCTV4/PCI [10fc:4050]
68 -> 3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA) [121a:3000,10b4:2637]
69 -> Active Imaging AIMMS
70 -> Prolink Pixelview PV-BT878P+ (Rev.4C,8E)
71 -> Lifeview FlyVideo 98EZ (capture only) LR51 [1851:1851]
72 -> Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) [1554:4011]
73 -> Sensoray 311 [6000:0311]
74 -> RemoteVision MX (RV605)
75 -> Powercolor MTV878/ MTV878R/ MTV878F
76 -> Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP) [0e11:0079]
77 -> GrandTec Multi Capture Card (Bt878)
78 -> Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF [0a01:17de]
79 -> DSP Design TCVIDEO
80 -> Hauppauge WinTV PVR [0070:4500]
81 -> IODATA GV-BCTV5/PCI [10fc:4070,10fc:d018]
82 -> Osprey 100/150 (878) [0070:ff00]
83 -> Osprey 100/150 (848)
84 -> Osprey 101 (848)
85 -> Osprey 101/151
86 -> Osprey 101/151 w/ svid
87 -> Osprey 200/201/250/251
88 -> Osprey 200/250 [0070:ff01]
89 -> Osprey 210/220
90 -> Osprey 500 [0070:ff02]
91 -> Osprey 540 [0070:ff04]
92 -> Osprey 2000 [0070:ff03]
93 -> IDS Eagle
94 -> Pinnacle PCTV Sat [11bd:001c]
95 -> Formac ProTV II (bt878)
96 -> MachTV
97 -> Euresys Picolo
98 -> ProVideo PV150 [aa00:1460,aa01:1461,aa02:1462,aa03:1463,aa04:1464,aa05:1465,aa06:1466,aa07:1467]
99 -> AD-TVK503
100 -> Hercules Smart TV Stereo
101 -> Pace TV & Radio Card
102 -> IVC-200 [0000:a155,0001:a155,0002:a155,0003:a155,0100:a155,0101:a155,0102:a155,0103:a155]
103 -> Grand X-Guard / Trust 814PCI [0304:0102]
104 -> Nebula Electronics DigiTV [0071:0101]
105 -> ProVideo PV143 [aa00:1430,aa00:1431,aa00:1432,aa00:1433,aa03:1433]
106 -> PHYTEC VD-009-X1 MiniDIN (bt878)
107 -> PHYTEC VD-009-X1 Combi (bt878)
108 -> PHYTEC VD-009 MiniDIN (bt878)
109 -> PHYTEC VD-009 Combi (bt878)
110 -> IVC-100 [ff00:a132]
111 -> IVC-120G [ff00:a182,ff01:a182,ff02:a182,ff03:a182,ff04:a182,ff05:a182,ff06:a182,ff07:a182,ff08:a182,ff09:a182,ff0a:a182,ff0b:a182,ff0c:a182,ff0d:a182,ff0e:a182,ff0f:a182]
112 -> pcHDTV HD-2000 TV [7063:2000]
113 -> Twinhan DST + clones [11bd:0026,1822:0001,270f:fc00]
114 -> Winfast VC100 [107d:6607]
115 -> Teppro TEV-560/InterVision IV-560
116 -> SIMUS GVC1100 [aa6a:82b2]
117 -> NGS NGSTV+
118 -> LMLBT4
119 -> Tekram M205 PRO
120 -> Conceptronic CONTVFMi
121 -> Euresys Picolo Tetra [1805:0105,1805:0106,1805:0107,1805:0108]
122 -> Spirit TV Tuner
123 -> AVerMedia AVerTV DVB-T 771 [1461:0771]
124 -> AverMedia AverTV DVB-T 761 [1461:0761]
125 -> MATRIX Vision Sigma-SQ
126 -> MATRIX Vision Sigma-SLC
127 -> APAC Viewcomp 878(AMAX)
128 -> DViCO FusionHDTV DVB-T Lite [18ac:db10]
129 -> V-Gear MyVCD
130 -> Super TV Tuner
131 -> Tibet Systems 'Progress DVR' CS16
132 -> Kodicom 4400R (master)
133 -> Kodicom 4400R (slave)
134 -> Adlink RTV24
135 -> DViCO FusionHDTV 5 Lite [18ac:d500]
136 -> Acorp Y878F [9511:1540]
137 -> Conceptronic CTVFMi v2
138 -> Prolink Pixelview PV-BT878P+ (Rev.2E)
139 -> Prolink PixelView PlayTV MPEG2 PV-M4900
140 -> Osprey 440 [0070:ff07]
141 -> Asound Skyeye PCTV

View File

@ -1,32 +1,37 @@
card=0 - UNKNOWN/GENERIC
card=1 - Hauppauge WinTV 34xxx models
card=2 - GDI Black Gold
card=3 - PixelView
card=4 - ATI TV Wonder Pro
card=5 - Leadtek Winfast 2000XP Expert
card=6 - AverTV Studio 303 (M126)
card=7 - MSI TV-@nywhere Master
card=8 - Leadtek Winfast DV2000
card=9 - Leadtek PVR 2000
card=10 - IODATA GV-VCP3/PCI
card=11 - Prolink PlayTV PVR
card=12 - ASUS PVR-416
card=13 - MSI TV-@nywhere
card=14 - KWorld/VStream XPert DVB-T
card=15 - DViCO FusionHDTV DVB-T1
card=16 - KWorld LTV883RF
card=17 - DViCO FusionHDTV 3 Gold-Q
card=18 - Hauppauge Nova-T DVB-T
card=19 - Conexant DVB-T reference design
card=20 - Provideo PV259
card=21 - DViCO FusionHDTV DVB-T Plus
card=22 - digitalnow DNTV Live! DVB-T
card=23 - pcHDTV HD3000 HDTV
card=24 - Hauppauge WinTV 28xxx (Roslyn) models
card=25 - Digital-Logic MICROSPACE Entertainment Center (MEC)
card=26 - IODATA GV/BCTV7E
card=27 - PixelView PlayTV Ultra Pro (Stereo)
card=28 - DViCO FusionHDTV 3 Gold-T
card=29 - ADS Tech Instant TV DVB-T PCI
card=30 - TerraTec Cinergy 1400 DVB-T
card=31 - DViCO FusionHDTV 5 Gold
0 -> UNKNOWN/GENERIC
1 -> Hauppauge WinTV 34xxx models [0070:3400,0070:3401]
2 -> GDI Black Gold [14c7:0106,14c7:0107]
3 -> PixelView [1554:4811]
4 -> ATI TV Wonder Pro [1002:00f8]
5 -> Leadtek Winfast 2000XP Expert [107d:6611,107d:6613]
6 -> AverTV Studio 303 (M126) [1461:000b]
7 -> MSI TV-@nywhere Master [1462:8606]
8 -> Leadtek Winfast DV2000 [107d:6620]
9 -> Leadtek PVR 2000 [107d:663b,107d:663C]
10 -> IODATA GV-VCP3/PCI [10fc:d003]
11 -> Prolink PlayTV PVR
12 -> ASUS PVR-416 [1043:4823]
13 -> MSI TV-@nywhere
14 -> KWorld/VStream XPert DVB-T [17de:08a6]
15 -> DViCO FusionHDTV DVB-T1 [18ac:db00]
16 -> KWorld LTV883RF
17 -> DViCO FusionHDTV 3 Gold-Q [18ac:d810]
18 -> Hauppauge Nova-T DVB-T [0070:9002]
19 -> Conexant DVB-T reference design [14f1:0187]
20 -> Provideo PV259 [1540:2580]
21 -> DViCO FusionHDTV DVB-T Plus [18ac:db10]
22 -> pcHDTV HD3000 HDTV [7063:3000]
23 -> digitalnow DNTV Live! DVB-T [17de:a8a6]
24 -> Hauppauge WinTV 28xxx (Roslyn) models [0070:2801]
25 -> Digital-Logic MICROSPACE Entertainment Center (MEC) [14f1:0342]
26 -> IODATA GV/BCTV7E [10fc:d035]
27 -> PixelView PlayTV Ultra Pro (Stereo)
28 -> DViCO FusionHDTV 3 Gold-T [18ac:d820]
29 -> ADS Tech Instant TV DVB-T PCI [1421:0334]
30 -> TerraTec Cinergy 1400 DVB-T [153b:1166]
31 -> DViCO FusionHDTV 5 Gold [18ac:d500]
32 -> AverMedia UltraTV Media Center PCI 550 [1461:8011]
33 -> Kworld V-Stream Xpert DVD
34 -> ATI HDTV Wonder [1002:a101]
35 -> WinFast DTV1000-T [107d:665f]
36 -> AVerTV 303 (M126) [1461:000a]

View File

@ -0,0 +1,10 @@
0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800]
1 -> Unknown EM2820/2840 video grabber (em2820/em2840)
2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036]
3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208]
4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200]
5 -> MSI VOX USB 2.0 (em2820/em2840) [eb1a:2820]
6 -> Terratec Cinergy 200 USB (em2800)
7 -> Leadtek Winfast USB II (em2800)
8 -> Kworld USB2800 (em2800)
9 -> Pinnacle Dazzle DVC 90 (em2820/em2840) [2304:0207]

View File

@ -6,10 +6,10 @@
5 -> SKNet Monster TV [1131:4e85]
6 -> Tevion MD 9717
7 -> KNC One TV-Station RDS / Typhoon TV Tuner RDS [1131:fe01,1894:fe01]
8 -> Terratec Cinergy 400 TV [153B:1142]
8 -> Terratec Cinergy 400 TV [153b:1142]
9 -> Medion 5044
10 -> Kworld/KuroutoShikou SAA7130-TVPCI
11 -> Terratec Cinergy 600 TV [153B:1143]
11 -> Terratec Cinergy 600 TV [153b:1143]
12 -> Medion 7134 [16be:0003]
13 -> Typhoon TV+Radio 90031
14 -> ELSA EX-VISION 300TV [1048:226b]
@ -36,8 +36,8 @@
35 -> AverMedia AverTV Studio 305 [1461:2115]
36 -> UPMOST PURPLE TV [12ab:0800]
37 -> Items MuchTV Plus / IT-005
38 -> Terratec Cinergy 200 TV [153B:1152]
39 -> LifeView FlyTV Platinum Mini [5168:0212]
38 -> Terratec Cinergy 200 TV [153b:1152]
39 -> LifeView FlyTV Platinum Mini [5168:0212,4e42:0212]
40 -> Compro VideoMate TV PVR/FM [185b:c100]
41 -> Compro VideoMate TV Gold+ [185b:c100]
42 -> Sabrent SBT-TVFM (saa7130)
@ -46,7 +46,7 @@
45 -> Avermedia AVerTV Studio 307 [1461:9715]
46 -> AVerMedia Cardbus TV/Radio (E500) [1461:d6ee]
47 -> Terratec Cinergy 400 mobile [153b:1162]
48 -> Terratec Cinergy 600 TV MK3 [153B:1158]
48 -> Terratec Cinergy 600 TV MK3 [153b:1158]
49 -> Compro VideoMate Gold+ Pal [185b:c200]
50 -> Pinnacle PCTV 300i DVB-T + PAL [11bd:002d]
51 -> ProVideo PV952 [1540:9524]
@ -56,12 +56,27 @@
55 -> LifeView FlyDVB-T DUO [5168:0502,5168:0306]
56 -> Avermedia AVerTV 307 [1461:a70a]
57 -> Avermedia AVerTV GO 007 FM [1461:f31f]
58 -> ADS Tech Instant TV (saa7135) [1421:0350,1421:0370]
58 -> ADS Tech Instant TV (saa7135) [1421:0350,1421:0370,1421:1370]
59 -> Kworld/Tevion V-Stream Xpert TV PVR7134
60 -> Typhoon DVB-T Duo Digital/Analog Cardbus [4e42:0502]
61 -> Philips TOUGH DVB-T reference design [1131:2004]
62 -> Compro VideoMate TV Gold+II
63 -> Kworld Xpert TV PVR7134
64 -> FlyTV mini Asus Digimatrix [1043:0210,1043:0210]
64 -> FlyTV mini Asus Digimatrix [1043:0210]
65 -> V-Stream Studio TV Terminator
66 -> Yuan TUN-900 (saa7135)
67 -> Beholder BeholdTV 409 FM [0000:4091]
68 -> GoTView 7135 PCI [5456:7135]
69 -> Philips EUROPA V3 reference design [1131:2004]
70 -> Compro Videomate DVB-T300 [185b:c900]
71 -> Compro Videomate DVB-T200 [185b:c901]
72 -> RTD Embedded Technologies VFG7350 [1435:7350]
73 -> RTD Embedded Technologies VFG7330 [1435:7330]
74 -> LifeView FlyTV Platinum Mini2 [14c0:1212]
75 -> AVerMedia AVerTVHD MCE A180 [1461:1044]
76 -> SKNet MonsterTV Mobile [1131:4ee9]
77 -> Pinnacle PCTV 110i (saa7133) [11bd:002e]
78 -> ASUSTeK P7131 Dual [1043:4862]
79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
80 -> ASUS Digimatrix TV [1043:0210]
81 -> Philips Tiger reference design [1131:2018]

View File

@ -53,7 +53,7 @@ tuner=51 - Philips PAL/SECAM_D (FM 1256 I-H3)
tuner=52 - Thomson DDT 7610 (ATSC/NTSC)
tuner=53 - Philips FQ1286
tuner=54 - tda8290+75
tuner=55 - LG PAL (TAPE series)
tuner=55 - TCL 2002MB
tuner=56 - Philips PAL/SECAM multi (FQ1216AME MK4)
tuner=57 - Philips FQ1236A MK4
tuner=58 - Ymec TVision TVF-8531MF/8831MF/8731MF
@ -65,3 +65,5 @@ tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner
tuner=64 - LG TDVS-H062F/TUA6034
tuner=65 - Ymec TVF66T5-B/DFF
tuner=66 - LG NTSC (TALN mini series)
tuner=67 - Philips TD1316 Hybrid Tuner
tuner=68 - Philips TUV1236D ATSC/NTSC dual in

View File

@ -17,9 +17,9 @@ audio
- The chip specs for the on-chip TV sound decoder are next
to useless :-/
- Neverless the builtin TV sound decoder starts working now,
at least for PAL-BG. Other TV norms need other code ...
FOR ANY REPORTS ON THIS PLEASE MENTION THE TV NORM YOU ARE
USING.
at least for PAL-BG. Other TV norms need other code ...
FOR ANY REPORTS ON THIS PLEASE MENTION THE TV NORM YOU ARE
USING.
- Most tuner chips do provide mono sound, which may or may not
be useable depending on the board design. With the Hauppauge
cards it works, so there is mono sound available as fallback.
@ -65,5 +65,5 @@ Have fun,
Gerd
--
--
Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]

View File

@ -78,5 +78,5 @@ Have fun,
Gerd
--
--
Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]

View File

@ -149,11 +149,11 @@ Lifeview Flyvideo Series:
2) There is a print on the PCB:
LR25 = Flyvideo (Zoran ZR36120, SAA7110A)
LR26 Rev.N = Flyvideo II (Bt848)
Rev.O = Flyvideo II (Bt878)
Rev.O = Flyvideo II (Bt878)
LR37 Rev.C = Flyvideo EZ (Capture only, ZR36120 + SAA7110)
LR38 Rev.A1= Flyvideo II EZ (Bt848 capture only)
LR50 Rev.Q = Flyvideo 98 (w/eeprom and PCI subsystem ID)
Rev.W = Flyvideo 98 (no eeprom)
Rev.W = Flyvideo 98 (no eeprom)
LR51 Rev.E = Flyvideo 98 EZ (capture only)
LR90 = Flyvideo 2000 (Bt878)
Flyvideo 2000S (Bt878) w/Stereo TV (Package incl. LR91 daughterboard)
@ -163,7 +163,7 @@ Lifeview Flyvideo Series:
LR136 = Flyvideo 2100/3100 (Low profile, SAA7130/SAA7134)
LR137 = Flyvideo DV2000/DV3000 (SAA7130/SAA7134 + IEEE1394)
LR138 Rev.C= Flyvideo 2000 (SAA7130)
or Flyvideo 3000 (SAA7134) w/Stereo TV
or Flyvideo 3000 (SAA7134) w/Stereo TV
These exist in variations w/FM and w/Remote sometimes denoted
by suffixes "FM" and "R".
3) You have a laptop (miniPCI card):
@ -197,7 +197,7 @@ Typhoon TV card series:
50680 "TV Tuner Pal BG" (blue package)= Pixelview PV-BT878P+ (Rev 9B)
50681 "TV Tuner PCI Pal I" (variant of 50680)
50682 "TView TV/FM Tuner Pal BG" = Flyvideo 98FM (LR50 Rev.Q)
Note: The package has a picture of CPH05x (which would be a real TView)
Note: The package has a picture of CPH05x (which would be a real TView)
50683 "TV Tuner PCI SECAM" (variant of 50680)
50684 "TV Tuner Pal BG" = Pixelview 878TV(Rev.3D)
50686 "TV Tuner" = KNC1 TV Station
@ -418,9 +418,9 @@ Lifetec/Medion/Tevion/Aldi
--------------------------
LT9306/MD9306 = CPH061
LT9415/MD9415 = LR90 Rev.F or Rev.G
MD9592 = Avermedia TVphone98 (PCI_ID=1461:0003), PCB-Rev=M168II-B (w/TDA9873H)
MD9717 = KNC One (Rev D4, saa7134, FM1216 MK2 tuner)
MD5044 = KNC One (Rev D4, saa7134, FM1216ME MK3 tuner)
MD9592 = Avermedia TVphone98 (PCI_ID=1461:0003), PCB-Rev=M168II-B (w/TDA9873H)
MD9717 = KNC One (Rev D4, saa7134, FM1216 MK2 tuner)
MD5044 = KNC One (Rev D4, saa7134, FM1216ME MK3 tuner)
Modular Technologies (www.modulartech.com) UK
---------------------------------------------
@ -453,10 +453,10 @@ Technisat
Discos ADR PC-Karte ISA (no TV!)
Discos ADR PC-Karte PCI (probably no TV?)
Techni-PC-Sat (Sat. analog)
Rev 1.2 (zr36120, vpx3220, stv0030, saa5246, BSJE3-494A)
Rev 1.2 (zr36120, vpx3220, stv0030, saa5246, BSJE3-494A)
Mediafocus I (zr36120/zr36125, drp3510, Sat. analog + ADR Radio)
Mediafocus II (saa7146, Sat. analog)
SatADR Rev 2.1 (saa7146a, saa7113h, stv0056a, msp3400c, drp3510a, BSKE3-307A)
SatADR Rev 2.1 (saa7146a, saa7113h, stv0056a, msp3400c, drp3510a, BSKE3-307A)
SkyStar 1 DVB (AV7110) = Technotrend Premium
SkyStar 2 DVB (B2C2) (=Sky2PC)

View File

@ -42,9 +42,9 @@ bttv uses the PCI Subsystem ID to autodetect the card type. lspci lists
the Subsystem ID in the second line, looks like this:
00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV/GO
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e2000000 (32-bit, prefetchable) [size=4K]
Subsystem: Hauppauge computer works Inc. WinTV/GO
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e2000000 (32-bit, prefetchable) [size=4K]
only bt878-based cards can have a subsystem ID (which does not mean
that every card really has one). bt848 cards can't have a Subsystem

View File

@ -61,8 +61,8 @@ line for your board. The important fields are these two:
struct tvcard
{
[ ... ]
u32 gpiomask;
u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */
u32 gpiomask;
u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */
};
gpiomask specifies which pins are used to control the audio mux chip.
@ -126,11 +126,11 @@ muxsel - video mux, input->registervalue mapping
pll - same as pll= insmod option
tuner_type - same as tuner= insmod option
*_modulename - hint whenever some card needs this or that audio
module loaded to work properly.
module loaded to work properly.
has_radio - whenever this TV card has a radio tuner.
no_msp34xx - "1" disables loading of msp3400.o module
no_tda9875 - "1" disables loading of tda9875.o module
needs_tvaudio - set to "1" to load tvaudio.o module
no_tda9875 - "1" disables loading of tda9875.o module
needs_tvaudio - set to "1" to load tvaudio.o module
If some config item is specified both from the tvcards array and as
insmod option, the insmod option takes precedence.
@ -144,5 +144,5 @@ Good luck,
PS: If you have a new working entry, mail it to me.
--
--
Gerd Knorr <kraxel@bytesex.org>

View File

@ -21,7 +21,7 @@ SAMSUNG Tuner identification: (e.g. TCPM9091PD27)
J= NTSC-Japan
L= Secam LL
M= BG+I+DK
N= NTSC
N= NTSC
Q= BG+I+DK+LL
[89]: ?
[125]:
@ -96,7 +96,7 @@ LG Innotek Tuner:
TADC-H002F: NTSC (L,175/410?; 2-B, C-W+11, W+12-69)
TADC-M201D: PAL D/K+B/G+I (L,143/425) (sound control at I2C address 0xc8)
TADC-T003F: NTSC Taiwan (L,175/410?; 2-B, C-W+11, W+12-69)
Suffix:
Suffix:
P= Standard phono female socket
D= IEC female socket
F= F-connector

View File

@ -10,33 +10,33 @@ bt878:
------------------------------------------------------------------------------
saa7134:
/* LifeView FlyTV Platinum FM (LR214WF) */
/* "Peter Missel <peter.missel@onlinehome.de> */
.name = "LifeView FlyTV Platinum FM",
/* GP27 MDT2005 PB4 pin 10 */
/* GP26 MDT2005 PB3 pin 9 */
/* GP25 MDT2005 PB2 pin 8 */
/* GP23 MDT2005 PB1 pin 7 */
/* GP22 MDT2005 PB0 pin 6 */
/* GP21 MDT2005 PB5 pin 11 */
/* GP20 MDT2005 PB6 pin 12 */
/* GP19 MDT2005 PB7 pin 13 */
/* nc MDT2005 PA3 pin 2 */
/* Remote MDT2005 PA2 pin 1 */
/* GP18 MDT2005 PA1 pin 18 */
/* nc MDT2005 PA0 pin 17 strap low */
/* LifeView FlyTV Platinum FM (LR214WF) */
/* "Peter Missel <peter.missel@onlinehome.de> */
.name = "LifeView FlyTV Platinum FM",
/* GP27 MDT2005 PB4 pin 10 */
/* GP26 MDT2005 PB3 pin 9 */
/* GP25 MDT2005 PB2 pin 8 */
/* GP23 MDT2005 PB1 pin 7 */
/* GP22 MDT2005 PB0 pin 6 */
/* GP21 MDT2005 PB5 pin 11 */
/* GP20 MDT2005 PB6 pin 12 */
/* GP19 MDT2005 PB7 pin 13 */
/* nc MDT2005 PA3 pin 2 */
/* Remote MDT2005 PA2 pin 1 */
/* GP18 MDT2005 PA1 pin 18 */
/* nc MDT2005 PA0 pin 17 strap low */
/* GP17 Strap "GP7"=High */
/* GP16 Strap "GP6"=High
0=Radio 1=TV
Drives SA630D ENCH1 and HEF4052 A1 pins
to do FM radio through SIF input */
/* GP15 nc */
/* GP14 nc */
/* GP13 nc */
/* GP12 Strap "GP5" = High */
/* GP11 Strap "GP4" = High */
/* GP10 Strap "GP3" = High */
/* GP09 Strap "GP2" = Low */
/* GP08 Strap "GP1" = Low */
/* GP07.00 nc */
/* GP17 Strap "GP7"=High */
/* GP16 Strap "GP6"=High
0=Radio 1=TV
Drives SA630D ENCH1 and HEF4052 A1 pins
to do FM radio through SIF input */
/* GP15 nc */
/* GP14 nc */
/* GP13 nc */
/* GP12 Strap "GP5" = High */
/* GP11 Strap "GP4" = High */
/* GP10 Strap "GP3" = High */
/* GP09 Strap "GP2" = Low */
/* GP08 Strap "GP1" = Low */
/* GP07.00 nc */

View File

@ -1330,6 +1330,24 @@ M: john.ronciak@intel.com
W: http://sourceforge.net/projects/e1000/
S: Supported
INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
P: Yi Zhu
M: yi.zhu@intel.com
P: James Ketrenos
M: jketreno@linux.intel.com
L: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
W: http://ipw2100.sourceforge.net
S: Supported
INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
P: Yi Zhu
M: yi.zhu@intel.com
P: James Ketrenos
M: jketreno@linux.intel.com
L: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
W: http://ipw2200.sourceforge.net
S: Supported
IOC3 DRIVER
P: Ralf Baechle
M: ralf@linux-mips.org

View File

@ -43,21 +43,17 @@
#include "proto.h"
#include "pci_impl.h"
void default_idle(void)
{
barrier();
}
void
cpu_idle(void)
{
set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
void (*idle)(void) = default_idle;
/* FIXME -- EV6 and LCA45 know how to power down
the CPU. */
while (!need_resched())
idle();
cpu_relax();
schedule();
}
}

View File

@ -356,6 +356,16 @@ config HOTPLUG_CPU
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
config LOCAL_TIMERS
bool "Use local timer interrupts"
depends on SMP && REALVIEW_MPCORE
default y
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
accounting to be spread across the timer interval, preventing a
"thundering herd" at every timer tick.
config PREEMPT
bool "Preemptible Kernel (EXPERIMENTAL)"
depends on EXPERIMENTAL

View File

@ -283,8 +283,14 @@ void flush_window(void)
putstr(".");
}
#ifndef arch_error
#define arch_error(x)
#endif
static void error(char *x)
{
arch_error(x);
putstr("\n\n");
putstr(x);
putstr("\n\n -- System halted");

View File

@ -19,12 +19,6 @@
#define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr)))
/* PCMCIA to Scoop linkage structures for pxa2xx_sharpsl.c
There is no easy way to link multiple scoop devices into one
single entity for the pxa2xx_pcmcia device */
int scoop_num;
struct scoop_pcmcia_dev *scoop_devs;
struct scoop_dev {
void *base;
spinlock_t scoop_lock;

View File

@ -9,6 +9,7 @@
*/
#include <linux/module.h>
#include <linux/string.h>
#include <linux/cryptohash.h>
#include <linux/delay.h>
#include <linux/in6.h>
#include <linux/syscalls.h>
@ -126,6 +127,9 @@ EXPORT_SYMBOL(__put_user_2);
EXPORT_SYMBOL(__put_user_4);
EXPORT_SYMBOL(__put_user_8);
/* crypto hash */
EXPORT_SYMBOL(sha_transform);
/* gcc lib functions */
EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__ashrdi3);

View File

@ -47,6 +47,13 @@
movne r0, sp
adrne lr, 1b
bne do_IPI
#ifdef CONFIG_LOCAL_TIMERS
test_for_ltirq r0, r6, r5, lr
movne r0, sp
adrne lr, 1b
bne do_local_timer
#endif
#endif
.endm

View File

@ -264,6 +264,7 @@ unlock:
#endif
#ifdef CONFIG_SMP
show_ipi_list(p);
show_local_irqs(p);
#endif
seq_printf(p, "Err: %10lu\n", irq_err_count);
}
@ -995,7 +996,7 @@ void __init init_irq_proc(void)
struct proc_dir_entry *dir;
int irq;
dir = proc_mkdir("irq", 0);
dir = proc_mkdir("irq", NULL);
if (!dir)
return;

View File

@ -86,12 +86,16 @@ EXPORT_SYMBOL(pm_power_off);
*/
void default_idle(void)
{
local_irq_disable();
if (!need_resched() && !hlt_counter) {
timer_dyn_reprogram();
arch_idle();
if (hlt_counter)
cpu_relax();
else {
local_irq_disable();
if (!need_resched()) {
timer_dyn_reprogram();
arch_idle();
}
local_irq_enable();
}
local_irq_enable();
}
/*
@ -116,13 +120,13 @@ void cpu_idle(void)
if (!idle)
idle = default_idle;
preempt_disable();
leds_event(led_idle_start);
while (!need_resched())
idle();
leds_event(led_idle_end);
preempt_enable();
preempt_enable_no_resched();
schedule();
preempt_disable();
}
}
@ -355,7 +359,7 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long stack_start,
struct thread_info *thread = p->thread_info;
struct pt_regs *childregs;
childregs = ((struct pt_regs *)((unsigned long)thread + THREAD_START_SP)) - 1;
childregs = (void *)thread + THREAD_START_SP - sizeof(*regs);
*childregs = *regs;
childregs->ARM_r0 = 0;
childregs->ARM_sp = stack_start;

View File

@ -142,7 +142,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
ret = -EIO;
}
secondary_data.stack = 0;
secondary_data.stack = NULL;
secondary_data.pgdir = 0;
*pmd_offset(pgd, PHYS_OFFSET) = __pmd(0);
@ -184,6 +184,11 @@ int __cpuexit __cpu_disable(void)
*/
migrate_irqs();
/*
* Stop the local timer for this CPU.
*/
local_timer_stop(cpu);
/*
* Flush user cache and TLB mappings, and then remove this CPU
* from the vm mask set of all processes.
@ -251,7 +256,9 @@ void __cpuexit cpu_die(void)
asmlinkage void __cpuinit secondary_start_kernel(void)
{
struct mm_struct *mm = &init_mm;
unsigned int cpu = smp_processor_id();
unsigned int cpu;
cpu = smp_processor_id();
printk("CPU%u: Booted secondary processor\n", cpu);
@ -268,6 +275,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
local_flush_tlb_all();
cpu_init();
preempt_disable();
/*
* Give the platform a chance to do its own initialisation.
@ -289,6 +297,11 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
*/
cpu_set(cpu, cpu_online_map);
/*
* Setup local timer for this CPU.
*/
local_timer_setup(cpu);
/*
* OK, it's off to the idle thread for us
*/
@ -359,8 +372,8 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
* You must not call this function with disabled interrupts, from a
* hardware interrupt handler, nor from a bottom half handler.
*/
int smp_call_function_on_cpu(void (*func)(void *info), void *info, int retry,
int wait, cpumask_t callmap)
static int smp_call_function_on_cpu(void (*func)(void *info), void *info,
int retry, int wait, cpumask_t callmap)
{
struct smp_call_struct data;
unsigned long timeout;
@ -454,6 +467,18 @@ void show_ipi_list(struct seq_file *p)
seq_putc(p, '\n');
}
void show_local_irqs(struct seq_file *p)
{
unsigned int cpu;
seq_printf(p, "LOC: ");
for_each_present_cpu(cpu)
seq_printf(p, "%10u ", irq_stat[cpu].local_timer_irqs);
seq_putc(p, '\n');
}
static void ipi_timer(struct pt_regs *regs)
{
int user = user_mode(regs);
@ -464,6 +489,18 @@ static void ipi_timer(struct pt_regs *regs)
irq_exit();
}
#ifdef CONFIG_LOCAL_TIMERS
asmlinkage void do_local_timer(struct pt_regs *regs)
{
int cpu = smp_processor_id();
if (local_timer_ack()) {
irq_stat[cpu].local_timer_irqs++;
ipi_timer(regs);
}
}
#endif
/*
* ipi_call_function - handle IPI from smp_call_function()
*
@ -515,7 +552,7 @@ static void ipi_cpu_stop(unsigned int cpu)
*
* Bit 0 - Inter-processor function call
*/
void do_IPI(struct pt_regs *regs)
asmlinkage void do_IPI(struct pt_regs *regs)
{
unsigned int cpu = smp_processor_id();
struct ipi_data *ipi = &per_cpu(ipi_data, cpu);

View File

@ -34,7 +34,7 @@
and r2, r0, #7
mov r3, #1
mov r3, r3, lsl r2
save_and_disable_irqs ip, r2
save_and_disable_irqs ip
ldrb r2, [r1, r0, lsr #3]
\instr r2, r2, r3
strb r2, [r1, r0, lsr #3]
@ -54,7 +54,7 @@
add r1, r1, r0, lsr #3
and r3, r0, #7
mov r0, #1
save_and_disable_irqs ip, r2
save_and_disable_irqs ip
ldrb r2, [r1]
tst r2, r0, lsl r3
\instr r2, r2, r0, lsl r3

View File

@ -13,7 +13,6 @@
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/sched.h>
#include <linux/version.h>
#include <asm/io.h>
#include <asm/hardware.h>

View File

@ -62,15 +62,6 @@ static struct scoop_config corgi_scoop_setup = {
.io_out = CORGI_SCOOP_IO_OUT,
};
static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
{
.dev = &corgiscoop_device.dev,
.irq = CORGI_IRQ_GPIO_CF_IRQ,
.cd_irq = CORGI_IRQ_GPIO_CF_CD,
.cd_irq_str = "PCMCIA0 CD",
},
};
struct platform_device corgiscoop_device = {
.name = "sharp-scoop",
.id = -1,
@ -81,6 +72,44 @@ struct platform_device corgiscoop_device = {
.resource = corgi_scoop_resources,
};
static void corgi_pcmcia_init(void)
{
/* Setup default state of GPIO outputs
before we enable them as outputs. */
GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
GPIO_bit(GPIO53_nPCE_2);
pxa_gpio_mode(GPIO48_nPOE_MD);
pxa_gpio_mode(GPIO49_nPWE_MD);
pxa_gpio_mode(GPIO50_nPIOR_MD);
pxa_gpio_mode(GPIO51_nPIOW_MD);
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
pxa_gpio_mode(GPIO52_nPCE_1_MD);
pxa_gpio_mode(GPIO53_nPCE_2_MD);
pxa_gpio_mode(GPIO54_pSKTSEL_MD);
}
static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
{
.dev = &corgiscoop_device.dev,
.irq = CORGI_IRQ_GPIO_CF_IRQ,
.cd_irq = CORGI_IRQ_GPIO_CF_CD,
.cd_irq_str = "PCMCIA0 CD",
},
};
static struct scoop_pcmcia_config corgi_pcmcia_config = {
.devs = &corgi_pcmcia_scoop[0],
.num_devs = 1,
.pcmcia_init = corgi_pcmcia_init,
};
EXPORT_SYMBOL(corgiscoop_device);
/*
* Corgi SSP Device
@ -294,8 +323,7 @@ static void __init corgi_init(void)
pxa_set_mci_info(&corgi_mci_platform_data);
pxa_set_ficp_info(&corgi_ficp_platform_data);
scoop_num = 1;
scoop_devs = &corgi_pcmcia_scoop[0];
platform_scoop_config = &corgi_pcmcia_config;
platform_add_devices(devices, ARRAY_SIZE(devices));
}

View File

@ -65,6 +65,27 @@ struct platform_device poodle_scoop_device = {
.resource = poodle_scoop_resources,
};
static void poodle_pcmcia_init(void)
{
/* Setup default state of GPIO outputs
before we enable them as outputs. */
GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
GPIO_bit(GPIO53_nPCE_2);
pxa_gpio_mode(GPIO48_nPOE_MD);
pxa_gpio_mode(GPIO49_nPWE_MD);
pxa_gpio_mode(GPIO50_nPIOR_MD);
pxa_gpio_mode(GPIO51_nPIOW_MD);
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
pxa_gpio_mode(GPIO52_nPCE_1_MD);
pxa_gpio_mode(GPIO53_nPCE_2_MD);
pxa_gpio_mode(GPIO54_pSKTSEL_MD);
}
static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
{
.dev = &poodle_scoop_device.dev,
@ -74,6 +95,14 @@ static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
},
};
static struct scoop_pcmcia_config poodle_pcmcia_config = {
.devs = &poodle_pcmcia_scoop[0],
.num_devs = 1,
.pcmcia_init = poodle_pcmcia_init,
};
EXPORT_SYMBOL(poodle_scoop_device);
/* LoCoMo device */
static struct resource locomo_resources[] = {
@ -268,8 +297,7 @@ static void __init poodle_init(void)
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
scoop_num = 1;
scoop_devs = &poodle_pcmcia_scoop[0];
platform_scoop_config = &poodle_pcmcia_config;
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret) {

View File

@ -104,6 +104,66 @@ struct platform_device spitzscoop2_device = {
.resource = spitz_scoop2_resources,
};
#define SPITZ_PWR_SD 0x01
#define SPITZ_PWR_CF 0x02
/* Power control is shared with between one of the CF slots and SD */
static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
{
unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
if (new_cpr & 0x0007) {
set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
if (!(cpr & 0x0002) && !(cpr & 0x0004))
mdelay(5);
if (device == SPITZ_PWR_CF)
cpr |= 0x0002;
if (device == SPITZ_PWR_SD)
cpr |= 0x0004;
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
} else {
if (device == SPITZ_PWR_CF)
cpr &= ~0x0002;
if (device == SPITZ_PWR_SD)
cpr &= ~0x0004;
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
mdelay(1);
reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
}
}
}
static void spitz_pcmcia_init(void)
{
/* Setup default state of GPIO outputs
before we enable them as outputs. */
GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2);
GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1);
pxa_gpio_mode(GPIO48_nPOE_MD);
pxa_gpio_mode(GPIO49_nPWE_MD);
pxa_gpio_mode(GPIO50_nPIOR_MD);
pxa_gpio_mode(GPIO51_nPIOW_MD);
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
pxa_gpio_mode(GPIO85_nPCE_1_MD);
pxa_gpio_mode(GPIO54_nPCE_2_MD);
pxa_gpio_mode(GPIO104_pSKTSEL_MD);
}
static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
{
/* Only need to override behaviour for slot 0 */
if (nr == 0)
spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr);
else
write_scoop_reg(scoop, SCOOP_CPR, cpr);
}
static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
{
.dev = &spitzscoop_device.dev,
@ -117,6 +177,16 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
},
};
static struct scoop_pcmcia_config spitz_pcmcia_config = {
.devs = &spitz_pcmcia_scoop[0],
.num_devs = 2,
.pcmcia_init = spitz_pcmcia_init,
.power_ctrl = spitz_pcmcia_pwr,
};
EXPORT_SYMBOL(spitzscoop_device);
EXPORT_SYMBOL(spitzscoop2_device);
/*
* Spitz SSP Device
@ -235,27 +305,14 @@ static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(in
return 0;
}
/* Power control is shared with one of the CF slots so we have a mess */
static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
if (( 1 << vdd) & p_d->ocr_mask) {
/* printk(KERN_DEBUG "%s: on\n", __FUNCTION__); */
set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
mdelay(2);
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | 0x04);
} else {
/* printk(KERN_DEBUG "%s: off\n", __FUNCTION__); */
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr & ~0x04);
if (!(cpr | 0x02)) {
mdelay(1);
reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
}
}
if (( 1 << vdd) & p_d->ocr_mask)
spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004);
else
spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
}
static int spitz_mci_get_ro(struct device *dev)
@ -351,8 +408,8 @@ static void __init common_init(void)
static void __init spitz_init(void)
{
scoop_num = 2;
scoop_devs = &spitz_pcmcia_scoop[0];
platform_scoop_config = &spitz_pcmcia_config;
spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity;
common_init();

View File

@ -132,11 +132,13 @@ static void __init pxa_timer_init(void)
tv.tv_sec = pxa_get_rtc_time();
do_settimeofday(&tv);
OSMR0 = 0; /* set initial match at 0 */
OIER = 0; /* disable any timer interrupts */
OSCR = LATCH*2; /* push OSCR out of the way */
OSMR0 = LATCH; /* set initial match */
OSSR = 0xf; /* clear status on all timers */
setup_irq(IRQ_OST0, &pxa_timer_irq);
OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */
OSCR = 0; /* initialize free-running timer, force first match */
OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */
OSCR = 0; /* initialize free-running timer */
}
#ifdef CONFIG_NO_IDLE_HZ

View File

@ -98,6 +98,9 @@ struct platform_device tosascoop_jc_device = {
.resource = tosa_scoop_jc_resources,
};
/*
* PCMCIA
*/
static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
{
.dev = &tosascoop_device.dev,
@ -111,16 +114,155 @@ static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
},
};
static void tosa_pcmcia_init(void)
{
/* Setup default state of GPIO outputs
before we enable them as outputs. */
GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
GPIO_bit(GPIO53_nPCE_2);
pxa_gpio_mode(GPIO48_nPOE_MD);
pxa_gpio_mode(GPIO49_nPWE_MD);
pxa_gpio_mode(GPIO50_nPIOR_MD);
pxa_gpio_mode(GPIO51_nPIOW_MD);
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
pxa_gpio_mode(GPIO52_nPCE_1_MD);
pxa_gpio_mode(GPIO53_nPCE_2_MD);
pxa_gpio_mode(GPIO54_pSKTSEL_MD);
}
static struct scoop_pcmcia_config tosa_pcmcia_config = {
.devs = &tosa_pcmcia_scoop[0],
.num_devs = 2,
.pcmcia_init = tosa_pcmcia_init,
};
/*
* USB Device Controller
*/
static void tosa_udc_command(int cmd)
{
switch(cmd) {
case PXA2XX_UDC_CMD_CONNECT:
set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
break;
case PXA2XX_UDC_CMD_DISCONNECT:
reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
break;
}
}
static int tosa_udc_is_connected(void)
{
return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0);
}
static struct pxa2xx_udc_mach_info udc_info __initdata = {
.udc_command = tosa_udc_command,
.udc_is_connected = tosa_udc_is_connected,
};
/*
* MMC/SD Device
*/
static struct pxamci_platform_data tosa_mci_platform_data;
static int tosa_mci_init(struct device *dev, irqreturn_t (*tosa_detect_int)(int, void *, struct pt_regs *), void *data)
{
int err;
/* setup GPIO for PXA25x MMC controller */
pxa_gpio_mode(GPIO6_MMCCLK_MD);
pxa_gpio_mode(GPIO8_MMCCS0_MD);
pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN);
tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, SA_INTERRUPT,
"MMC/SD card detect", data);
if (err) {
printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
return -1;
}
set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
return 0;
}
static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
if (( 1 << vdd) & p_d->ocr_mask) {
set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
} else {
reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
}
}
static int tosa_mci_get_ro(struct device *dev)
{
return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP);
}
static void tosa_mci_exit(struct device *dev, void *data)
{
free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
}
static struct pxamci_platform_data tosa_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = tosa_mci_init,
.get_ro = tosa_mci_get_ro,
.setpower = tosa_mci_setpower,
.exit = tosa_mci_exit,
};
/*
* Irda
*/
static void tosa_irda_transceiver_mode(struct device *dev, int mode)
{
if (mode & IR_OFF) {
reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW);
pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT);
} else {
pxa_gpio_mode(GPIO47_STTXD_MD);
set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
}
}
static struct pxaficp_platform_data tosa_ficp_platform_data = {
.transceiver_cap = IR_SIRMODE | IR_OFF,
.transceiver_mode = tosa_irda_transceiver_mode,
};
/*
* Tosa Keyboard
*/
static struct platform_device tosakbd_device = {
.name = "tosa-keyboard",
.id = -1,
};
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
&tosakbd_device,
};
static void __init tosa_init(void)
{
pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN);
pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN);
/* setup sleep mode values */
PWER = 0x00000002;
@ -131,13 +273,15 @@ static void __init tosa_init(void)
PGSR2 = 0x00014000;
PCFR |= PCFR_OPDE;
// enable batt_fault
/* enable batt_fault */
PMCR = 0x01;
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_mci_info(&tosa_mci_platform_data);
pxa_set_udc_info(&udc_info);
pxa_set_ficp_info(&tosa_ficp_platform_data);
platform_scoop_config = &tosa_pcmcia_config;
scoop_num = 2;
scoop_devs = &tosa_pcmcia_scoop[0];
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init fixup_tosa(struct machine_desc *desc,

View File

@ -5,3 +5,5 @@
obj-y := core.o clock.o
obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o

View File

@ -550,6 +550,11 @@ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id, struct pt_reg
timer_tick(regs);
#if defined(CONFIG_SMP) && !defined(CONFIG_LOCAL_TIMERS)
smp_send_timer();
update_process_times(user_mode(regs));
#endif
write_sequnlock(&xtime_lock);
return IRQ_HANDLED;

View File

@ -0,0 +1,138 @@
/*
* linux/arch/arm/mach-realview/hotplug.c
*
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/smp.h>
#include <linux/completion.h>
extern volatile int pen_release;
static DECLARE_COMPLETION(cpu_killed);
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
asm volatile( "mcr p15, 0, %1, c7, c14, 0\n"
" mcr p15, 0, %1, c7, c5, 0\n"
" mcr p15, 0, %1, c7, c10, 4\n"
/*
* Turn off coherency
*/
" mrc p15, 0, %0, c1, c0, 1\n"
" bic %0, %0, #0x20\n"
" mcr p15, 0, %0, c1, c0, 1\n"
" mrc p15, 0, %0, c1, c0, 0\n"
" bic %0, %0, #0x04\n"
" mcr p15, 0, %0, c1, c0, 0\n"
: "=&r" (v)
: "r" (0)
: "cc");
}
static inline void cpu_leave_lowpower(void)
{
unsigned int v;
asm volatile( "mrc p15, 0, %0, c1, c0, 0\n"
" orr %0, %0, #0x04\n"
" mcr p15, 0, %0, c1, c0, 0\n"
" mrc p15, 0, %0, c1, c0, 1\n"
" orr %0, %0, #0x20\n"
" mcr p15, 0, %0, c1, c0, 1\n"
: "=&r" (v)
:
: "cc");
}
static inline void platform_do_lowpower(unsigned int cpu)
{
/*
* there is no power-control hardware on this platform, so all
* we can do is put the core into WFI; this is safe as the calling
* code will have already disabled interrupts
*/
for (;;) {
/*
* here's the WFI
*/
asm(".word 0xe320f003\n"
:
:
: "memory", "cc");
if (pen_release == cpu) {
/*
* OK, proper wakeup, we're done
*/
break;
}
/*
* getting here, means that we have come out of WFI without
* having been woken up - this shouldn't happen
*
* The trouble is, letting people know about this is not really
* possible, since we are currently running incoherently, and
* therefore cannot safely call printk() or anything else
*/
#ifdef DEBUG
printk("CPU%u: spurious wakeup call\n", cpu);
#endif
}
}
int platform_cpu_kill(unsigned int cpu)
{
return wait_for_completion_timeout(&cpu_killed, 5000);
}
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
void platform_cpu_die(unsigned int cpu)
{
#ifdef DEBUG
unsigned int this_cpu = hard_smp_processor_id();
if (cpu != this_cpu) {
printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
this_cpu, cpu);
BUG();
}
#endif
printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
complete(&cpu_killed);
/*
* we're ready for shutdown now, so do it
*/
cpu_enter_lowpower();
platform_do_lowpower(cpu);
/*
* bring this CPU back into the world of cache
* coherency, and then restore interrupts
*/
cpu_leave_lowpower();
}
int mach_cpu_disable(unsigned int cpu)
{
/*
* we don't allow CPU 0 to be shutdown (it is still too special
* e.g. clock tick interrupts)
*/
return cpu == 0 ? -EPERM : 0;
}

View File

@ -0,0 +1,130 @@
/*
* linux/arch/arm/mach-realview/localtimer.c
*
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/smp.h>
#include <asm/mach/time.h>
#include <asm/hardware/arm_twd.h>
#include <asm/hardware/gic.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include "core.h"
#define TWD_BASE(cpu) (__io_address(REALVIEW_TWD_BASE) + \
((cpu) * REALVIEW_TWD_SIZE))
static unsigned long mpcore_timer_rate;
/*
* local_timer_ack: checks for a local timer interrupt.
*
* If a local timer interrupt has occured, acknowledge and return 1.
* Otherwise, return 0.
*/
int local_timer_ack(void)
{
void __iomem *base = TWD_BASE(smp_processor_id());
if (__raw_readl(base + TWD_TIMER_INTSTAT)) {
__raw_writel(1, base + TWD_TIMER_INTSTAT);
return 1;
}
return 0;
}
void __cpuinit local_timer_setup(unsigned int cpu)
{
void __iomem *base = TWD_BASE(cpu);
unsigned int load, offset;
u64 waitjiffies;
unsigned int count;
/*
* If this is the first time round, we need to work out how fast
* the timer ticks
*/
if (mpcore_timer_rate == 0) {
printk("Calibrating local timer... ");
/* Wait for a tick to start */
waitjiffies = get_jiffies_64() + 1;
while (get_jiffies_64() < waitjiffies)
udelay(10);
/* OK, now the tick has started, let's get the timer going */
waitjiffies += 5;
/* enable, no interrupt or reload */
__raw_writel(0x1, base + TWD_TIMER_CONTROL);
/* maximum value */
__raw_writel(0xFFFFFFFFU, base + TWD_TIMER_COUNTER);
while (get_jiffies_64() < waitjiffies)
udelay(10);
count = __raw_readl(base + TWD_TIMER_COUNTER);
mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000,
(mpcore_timer_rate / 100000) % 100);
}
load = mpcore_timer_rate / HZ;
__raw_writel(load, base + TWD_TIMER_LOAD);
__raw_writel(0x7, base + TWD_TIMER_CONTROL);
/*
* Now maneuver our local tick into the right part of the jiffy.
* Start by working out where within the tick our local timer
* interrupt should go.
*/
offset = ((mpcore_timer_rate / HZ) / (NR_CPUS + 1)) * (cpu + 1);
/*
* gettimeoffset() will return a number of us since the last tick.
* Convert this number of us to a local timer tick count.
* Be careful of integer overflow whilst keeping maximum precision.
*
* with HZ=100 and 1MHz (fpga) ~ 1GHz processor:
* load = 1 ~ 10,000
* mpcore_timer_rate/10000 = 100 ~ 100,000
*
* so the multiply value will be less than 10^9 always.
*/
load = (system_timer->offset() * (mpcore_timer_rate / 10000)) / 100;
/* Add on our offset to get the load value */
load = (load + offset) % (mpcore_timer_rate / HZ);
__raw_writel(load, base + TWD_TIMER_COUNTER);
/* Make sure our local interrupt controller has this enabled */
__raw_writel(1 << IRQ_LOCALTIMER,
__io_address(REALVIEW_GIC_DIST_BASE) + GIC_DIST_ENABLE_SET);
}
/*
* take a local timer down
*/
void __cpuexit local_timer_stop(unsigned int cpu)
{
__raw_writel(0, TWD_BASE(cpu) + TWD_TIMER_CONTROL);
}

View File

@ -32,7 +32,7 @@ static unsigned int __init get_core_count(void)
{
unsigned int ncores;
ncores = __raw_readl(IO_ADDRESS(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG);
ncores = __raw_readl(__io_address(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG);
return (ncores & 0x03) + 1;
}
@ -133,12 +133,12 @@ static void __init poke_milo(void)
#if 1
#define REALVIEW_SYS_FLAGSS_OFFSET 0x30
__raw_writel(virt_to_phys(realview_secondary_startup),
(IO_ADDRESS(REALVIEW_SYS_BASE) +
REALVIEW_SYS_FLAGSS_OFFSET));
__io_address(REALVIEW_SYS_BASE) +
REALVIEW_SYS_FLAGSS_OFFSET);
#define REALVIEW_SYS_FLAGSC_OFFSET 0x34
__raw_writel(3,
(IO_ADDRESS(REALVIEW_SYS_BASE) +
REALVIEW_SYS_FLAGSC_OFFSET));
__io_address(REALVIEW_SYS_BASE) +
REALVIEW_SYS_FLAGSC_OFFSET);
#endif
mb();
@ -174,6 +174,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
if (max_cpus > ncores)
max_cpus = ncores;
/*
* Enable the local timer for primary CPU
*/
local_timer_setup(cpu);
/*
* Initialise the possible/present maps.
* cpu_possible_map describes the set of CPUs which may be present

View File

@ -121,6 +121,14 @@ config S3C2410_BOOT_WATCHDOG
system resets depends on the value of PCLK. The timeout on an
200MHz s3c2410 should be about 30 seconds.
config S3C2410_BOOT_ERROR_RESET
bool "S3C2410 Reboot on decompression error"
depends on ARCH_S3C2410
help
Say y here to use the watchdog to reset the system if the
kernel decompressor detects an error during decompression.
comment "S3C2410 Setup"
config S3C2410_DMA

View File

@ -56,8 +56,16 @@
static struct map_desc anubis_iodesc[] __initdata = {
/* ISA IO areas */
{ (u32)S3C24XX_VA_ISA_BYTE, 0x0, SZ_16M, MT_DEVICE },
{ (u32)S3C24XX_VA_ISA_WORD, 0x0, SZ_16M, MT_DEVICE },
{
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
.pfn = __phys_to_pfn(0x0),
.length = SZ_4M,
.type = MT_DEVICE
}, {
.virtual = (u32)S3C24XX_VA_ISA_WORD,
.pfn = __phys_to_pfn(0x0),
.length = SZ_4M, MT_DEVICE
},
/* we could possibly compress the next set down into a set of smaller tables
* pagetables, but that would mean using an L2 section, and it still means
@ -66,16 +74,41 @@ static struct map_desc anubis_iodesc[] __initdata = {
/* CPLD control registers */
{ (u32)ANUBIS_VA_CTRL1, ANUBIS_PA_CTRL1, SZ_4K, MT_DEVICE },
{ (u32)ANUBIS_VA_CTRL2, ANUBIS_PA_CTRL2, SZ_4K, MT_DEVICE },
{
.virtual = (u32)ANUBIS_VA_CTRL1,
.pfn = __phys_to_pfn(ANUBIS_PA_CTRL1),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = (u32)ANUBIS_VA_CTRL2,
.pfn = __phys_to_pfn(ANUBIS_PA_CTRL2),
.length = SZ_4K,
.type =MT_DEVICE
},
/* IDE drives */
{ (u32)ANUBIS_IDEPRI, S3C2410_CS3, SZ_1M, MT_DEVICE },
{ (u32)ANUBIS_IDEPRIAUX, S3C2410_CS3+(1<<26), SZ_1M, MT_DEVICE },
{ (u32)ANUBIS_IDESEC, S3C2410_CS4, SZ_1M, MT_DEVICE },
{ (u32)ANUBIS_IDESECAUX, S3C2410_CS4+(1<<26), SZ_1M, MT_DEVICE },
{
.virtual = (u32)ANUBIS_IDEPRI,
.pfn = __phys_to_pfn(S3C2410_CS3),
.length = SZ_1M,
.type = MT_DEVICE
}, {
.virtual = (u32)ANUBIS_IDEPRIAUX,
.pfn = __phys_to_pfn(S3C2410_CS3+(1<<26)),
.length = SZ_1M,
.type = MT_DEVICE
}, {
.virtual = (u32)ANUBIS_IDESEC,
.pfn = __phys_to_pfn(S3C2410_CS4),
.length = SZ_1M,
.type = MT_DEVICE
}, {
.virtual = (u32)ANUBIS_IDESECAUX,
.pfn = __phys_to_pfn(S3C2410_CS4+(1<<26)),
.length = SZ_1M,
.type = MT_DEVICE
},
};
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK

View File

@ -89,32 +89,63 @@
/* macros to modify the physical addresses for io space */
#define PA_CS2(item) ((item) + S3C2410_CS2)
#define PA_CS3(item) ((item) + S3C2410_CS3)
#define PA_CS4(item) ((item) + S3C2410_CS4)
#define PA_CS5(item) ((item) + S3C2410_CS5)
#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
static struct map_desc bast_iodesc[] __initdata = {
/* ISA IO areas */
{ (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
{ (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
/* we could possibly compress the next set down into a set of smaller tables
* pagetables, but that would mean using an L2 section, and it still means
* we cannot actually feed the same register to an LDR due to 16K spacing
*/
{
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
.pfn = PA_CS2(BAST_PA_ISAIO),
.length = SZ_16M,
.type = MT_DEVICE,
}, {
.virtual = (u32)S3C24XX_VA_ISA_WORD,
.pfn = PA_CS3(BAST_PA_ISAIO),
.length = SZ_16M,
.type = MT_DEVICE,
},
/* bast CPLD control registers, and external interrupt controls */
{ (u32)BAST_VA_CTRL1, BAST_PA_CTRL1, SZ_1M, MT_DEVICE },
{ (u32)BAST_VA_CTRL2, BAST_PA_CTRL2, SZ_1M, MT_DEVICE },
{ (u32)BAST_VA_CTRL3, BAST_PA_CTRL3, SZ_1M, MT_DEVICE },
{ (u32)BAST_VA_CTRL4, BAST_PA_CTRL4, SZ_1M, MT_DEVICE },
{
.virtual = (u32)BAST_VA_CTRL1,
.pfn = __phys_to_pfn(BAST_PA_CTRL1),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_CTRL2,
.pfn = __phys_to_pfn(BAST_PA_CTRL2),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_CTRL3,
.pfn = __phys_to_pfn(BAST_PA_CTRL3),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_CTRL4,
.pfn = __phys_to_pfn(BAST_PA_CTRL4),
.length = SZ_1M,
.type = MT_DEVICE,
},
/* PC104 IRQ mux */
{ (u32)BAST_VA_PC104_IRQREQ, BAST_PA_PC104_IRQREQ, SZ_1M, MT_DEVICE },
{ (u32)BAST_VA_PC104_IRQRAW, BAST_PA_PC104_IRQRAW, SZ_1M, MT_DEVICE },
{ (u32)BAST_VA_PC104_IRQMASK, BAST_PA_PC104_IRQMASK, SZ_1M, MT_DEVICE },
{
.virtual = (u32)BAST_VA_PC104_IRQREQ,
.pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_PC104_IRQRAW,
.pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_PC104_IRQMASK,
.pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK),
.length = SZ_1M,
.type = MT_DEVICE,
},
/* peripheral space... one for each of fast/slow/byte/16bit */
/* note, ide is only decoded in word space, even though some registers

View File

@ -56,8 +56,17 @@
static struct map_desc rx3715_iodesc[] __initdata = {
/* dump ISA space somewhere unused */
{ (u32)S3C24XX_VA_ISA_WORD, S3C2410_CS3, SZ_16M, MT_DEVICE },
{ (u32)S3C24XX_VA_ISA_BYTE, S3C2410_CS3, SZ_16M, MT_DEVICE },
{
.virtual = (u32)S3C24XX_VA_ISA_WORD,
.pfn = __phys_to_pfn(S3C2410_CS3),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
.pfn = __phys_to_pfn(S3C2410_CS3),
.length = SZ_1M,
.type = MT_DEVICE,
},
};

View File

@ -58,8 +58,27 @@
static struct map_desc smdk2440_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
{ (u32)S3C24XX_VA_ISA_WORD, S3C2410_CS2, SZ_16M, MT_DEVICE },
{ (u32)S3C24XX_VA_ISA_BYTE, S3C2410_CS2, SZ_16M, MT_DEVICE },
{
.virtual = (u32)S3C24XX_VA_ISA_WORD,
.pfn = __phys_to_pfn(S3C2410_CS2),
.length = 0x10000,
.type = MT_DEVICE,
}, {
.virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
.pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
.length = SZ_4M,
.type = MT_DEVICE,
}, {
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
.pfn = __phys_to_pfn(S3C2410_CS2),
.length = 0x10000,
.type = MT_DEVICE,
}, {
.virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
.pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
.length = SZ_4M,
.type = MT_DEVICE,
}
};
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK

View File

@ -74,27 +74,47 @@
/* macros to modify the physical addresses for io space */
#define PA_CS2(item) ((item) + S3C2410_CS2)
#define PA_CS3(item) ((item) + S3C2410_CS3)
#define PA_CS4(item) ((item) + S3C2410_CS4)
#define PA_CS5(item) ((item) + S3C2410_CS5)
#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
static struct map_desc vr1000_iodesc[] __initdata = {
/* ISA IO areas */
{
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
.pfn = PA_CS2(BAST_PA_ISAIO),
.length = SZ_16M,
.type = MT_DEVICE,
}, {
.virtual = (u32)S3C24XX_VA_ISA_WORD,
.pfn = PA_CS3(BAST_PA_ISAIO),
.length = SZ_16M,
.type = MT_DEVICE,
},
{ (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
{ (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
/* we could possibly compress the next set down into a set of smaller tables
* pagetables, but that would mean using an L2 section, and it still means
* we cannot actually feed the same register to an LDR due to 16K spacing
*/
/* bast CPLD control registers, and external interrupt controls */
{ (u32)VR1000_VA_CTRL1, VR1000_PA_CTRL1, SZ_1M, MT_DEVICE },
{ (u32)VR1000_VA_CTRL2, VR1000_PA_CTRL2, SZ_1M, MT_DEVICE },
{ (u32)VR1000_VA_CTRL3, VR1000_PA_CTRL3, SZ_1M, MT_DEVICE },
{ (u32)VR1000_VA_CTRL4, VR1000_PA_CTRL4, SZ_1M, MT_DEVICE },
/* CPLD control registers, and external interrupt controls */
{
.virtual = (u32)VR1000_VA_CTRL1,
.pfn = __phys_to_pfn(VR1000_PA_CTRL1),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)VR1000_VA_CTRL2,
.pfn = __phys_to_pfn(VR1000_PA_CTRL2),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)VR1000_VA_CTRL3,
.pfn = __phys_to_pfn(VR1000_PA_CTRL3),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)VR1000_VA_CTRL4,
.pfn = __phys_to_pfn(VR1000_PA_CTRL4),
.length = SZ_1M,
.type = MT_DEVICE,
},
/* peripheral space... one for each of fast/slow/byte/16bit */
/* note, ide is only decoded in word space, even though some registers

View File

@ -124,11 +124,13 @@ static void __init sa1100_timer_init(void)
tv.tv_sec = sa1100_get_rtc_time();
do_settimeofday(&tv);
OSMR0 = 0; /* set initial match at 0 */
OIER = 0; /* disable any timer interrupts */
OSCR = LATCH*2; /* push OSCR out of the way */
OSMR0 = LATCH; /* set initial match */
OSSR = 0xf; /* clear status on all timers */
setup_irq(IRQ_OST0, &sa1100_timer_irq);
OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */
OSCR = 0; /* initialize free-running timer, force first match */
OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */
OSCR = 0; /* initialize free-running timer */
}
#ifdef CONFIG_NO_IDLE_HZ

View File

@ -25,7 +25,6 @@
#include <linux/config.h>
#include <linux/module.h>
#include <linux/version.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>

View File

@ -74,15 +74,13 @@ __setup("hlt", hlt_setup);
void cpu_idle(void)
{
/* endless idle loop with no priority at all */
preempt_disable();
while (1) {
while (!need_resched()) {
local_irq_disable();
if (!need_resched() && !hlt_counter)
local_irq_enable();
}
while (!need_resched())
cpu_relax();
preempt_enable_no_resched();
schedule();
preempt_disable();
}
schedule();
}
static char reboot_mode = 'h';

View File

@ -19,7 +19,6 @@
*/
#include <linux/config.h>
#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>

View File

@ -112,7 +112,6 @@
#include <asm/rtc.h>
#include <linux/config.h>
#include <linux/version.h>
#include <asm/arch/svinto.h>
#include <asm/fasttimer.h>

View File

@ -14,7 +14,6 @@
*
*/
#include <linux/version.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/module.h>

View File

@ -18,7 +18,6 @@
*/
#include <linux/config.h>
#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>

View File

@ -161,6 +161,7 @@ void __init smp_callin(void)
REG_WR(intr_vect, irq_regs[cpu], rw_mask, vect_mask);
unmask_irq(IPI_INTR_VECT);
unmask_irq(TIMER_INTR_VECT);
preempt_disable();
local_irq_enable();
cpu_set(cpu, cpu_online_map);

View File

@ -218,7 +218,9 @@ void cpu_idle (void)
idle = default_idle;
idle();
}
preempt_enable_no_resched();
schedule();
preempt_disable();
}
}

View File

@ -77,16 +77,20 @@ void (*idle)(void) = core_sleep_idle;
*/
void cpu_idle(void)
{
int cpu = smp_processor_id();
/* endless idle loop with no priority at all */
while (1) {
while (!need_resched()) {
irq_stat[smp_processor_id()].idle_timestamp = jiffies;
irq_stat[cpu].idle_timestamp = jiffies;
if (!frv_dma_inprogress && idle)
idle();
}
preempt_enable_no_resched();
schedule();
preempt_disable();
}
}

View File

@ -53,22 +53,18 @@ asmlinkage void ret_from_fork(void);
#if !defined(CONFIG_H8300H_SIM) && !defined(CONFIG_H8S_SIM)
void default_idle(void)
{
while(1) {
if (!need_resched()) {
local_irq_enable();
__asm__("sleep");
local_irq_disable();
}
schedule();
}
local_irq_disable();
if (!need_resched()) {
local_irq_enable();
/* XXX: race here! What if need_resched() gets set now? */
__asm__("sleep");
} else
local_irq_enable();
}
#else
void default_idle(void)
{
while(1) {
if (need_resched())
schedule();
}
cpu_relax();
}
#endif
void (*idle)(void) = default_idle;
@ -81,7 +77,13 @@ void (*idle)(void) = default_idle;
*/
void cpu_idle(void)
{
idle();
while (1) {
while (!need_resched())
idle();
preempt_enable_no_resched();
schedule();
preempt_disable();
}
}
void machine_restart(char * __unused)

View File

@ -769,8 +769,26 @@ static int set_system_power_state(u_short state)
static int apm_do_idle(void)
{
u32 eax;
u8 ret = 0;
int idled = 0;
int polling;
if (apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax)) {
polling = test_thread_flag(TIF_POLLING_NRFLAG);
if (polling) {
clear_thread_flag(TIF_POLLING_NRFLAG);
smp_mb__after_clear_bit();
}
if (!need_resched()) {
idled = 1;
ret = apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax);
}
if (polling)
set_thread_flag(TIF_POLLING_NRFLAG);
if (!idled)
return 0;
if (ret) {
static unsigned long t;
/* This always fails on some SMP boards running UP kernels.

View File

@ -99,14 +99,22 @@ EXPORT_SYMBOL(enable_hlt);
*/
void default_idle(void)
{
local_irq_enable();
if (!hlt_counter && boot_cpu_data.hlt_works_ok) {
local_irq_disable();
if (!need_resched())
safe_halt();
else
local_irq_enable();
clear_thread_flag(TIF_POLLING_NRFLAG);
smp_mb__after_clear_bit();
while (!need_resched()) {
local_irq_disable();
if (!need_resched())
safe_halt();
else
local_irq_enable();
}
set_thread_flag(TIF_POLLING_NRFLAG);
} else {
cpu_relax();
while (!need_resched())
cpu_relax();
}
}
#ifdef CONFIG_APM_MODULE
@ -120,29 +128,14 @@ EXPORT_SYMBOL(default_idle);
*/
static void poll_idle (void)
{
int oldval;
local_irq_enable();
/*
* Deal with another CPU just having chosen a thread to
* run here:
*/
oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED);
if (!oldval) {
set_thread_flag(TIF_POLLING_NRFLAG);
asm volatile(
"2:"
"testl %0, %1;"
"rep; nop;"
"je 2b;"
: : "i"(_TIF_NEED_RESCHED), "m" (current_thread_info()->flags));
clear_thread_flag(TIF_POLLING_NRFLAG);
} else {
set_need_resched();
}
asm volatile(
"2:"
"testl %0, %1;"
"rep; nop;"
"je 2b;"
: : "i"(_TIF_NEED_RESCHED), "m" (current_thread_info()->flags));
}
#ifdef CONFIG_HOTPLUG_CPU
@ -179,7 +172,9 @@ static inline void play_dead(void)
*/
void cpu_idle(void)
{
int cpu = raw_smp_processor_id();
int cpu = smp_processor_id();
set_thread_flag(TIF_POLLING_NRFLAG);
/* endless idle loop with no priority at all */
while (1) {
@ -201,7 +196,9 @@ void cpu_idle(void)
__get_cpu_var(irq_stat).idle_timestamp = jiffies;
idle();
}
preempt_enable_no_resched();
schedule();
preempt_disable();
}
}
@ -244,15 +241,12 @@ static void mwait_idle(void)
{
local_irq_enable();
if (!need_resched()) {
set_thread_flag(TIF_POLLING_NRFLAG);
do {
__monitor((void *)&current_thread_info()->flags, 0, 0);
if (need_resched())
break;
__mwait(0, 0);
} while (!need_resched());
clear_thread_flag(TIF_POLLING_NRFLAG);
while (!need_resched()) {
__monitor((void *)&current_thread_info()->flags, 0, 0);
smp_mb();
if (need_resched())
break;
__mwait(0, 0);
}
}

View File

@ -129,9 +129,7 @@ struct drive_info_struct { char dummy[32]; } drive_info;
EXPORT_SYMBOL(drive_info);
#endif
struct screen_info screen_info;
#ifdef CONFIG_VT
EXPORT_SYMBOL(screen_info);
#endif
struct apm_info apm_info;
EXPORT_SYMBOL(apm_info);
struct sys_desc_table_struct {

View File

@ -485,6 +485,7 @@ static void __devinit start_secondary(void *unused)
* things done here to the most necessary things.
*/
cpu_init();
preempt_disable();
smp_callin();
while (!cpu_isset(smp_processor_id(), smp_commenced_mask))
rep_nop();

View File

@ -29,10 +29,8 @@
#define CODE
#include "compat_ioctl.c"
typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *);
#define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL((cmd),sys_ioctl)
#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl32_handler_t)(handler), NULL },
#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl_trans_handler_t)(handler), NULL },
#define IOCTL_TABLE_START \
struct ioctl_trans ioctl_start[] = {
#define IOCTL_TABLE_END \

View File

@ -88,7 +88,7 @@ mca_page_isolate(unsigned long paddr)
if (!ia64_phys_addr_valid(paddr))
return ISOLATE_NONE;
if (!pfn_valid(paddr))
if (!pfn_valid(paddr >> PAGE_SHIFT))
return ISOLATE_NONE;
/* convert physical address to physical page number */
@ -108,6 +108,7 @@ mca_page_isolate(unsigned long paddr)
return ISOLATE_NG;
/* add attribute 'Reserved' and register the page */
get_page(p);
SetPageReserved(p);
page_isolate[num_page_isolate++] = p;

View File

@ -197,11 +197,15 @@ void
default_idle (void)
{
local_irq_enable();
while (!need_resched())
if (can_do_pal_halt)
safe_halt();
else
while (!need_resched()) {
if (can_do_pal_halt) {
local_irq_disable();
if (!need_resched())
safe_halt();
local_irq_enable();
} else
cpu_relax();
}
}
#ifdef CONFIG_HOTPLUG_CPU
@ -263,16 +267,16 @@ void __attribute__((noreturn))
cpu_idle (void)
{
void (*mark_idle)(int) = ia64_mark_idle;
int cpu = smp_processor_id();
set_thread_flag(TIF_POLLING_NRFLAG);
/* endless idle loop with no priority at all */
while (1) {
if (!need_resched()) {
void (*idle)(void);
#ifdef CONFIG_SMP
if (!need_resched())
min_xtp();
#endif
while (!need_resched()) {
void (*idle)(void);
if (__get_cpu_var(cpu_idle_state))
__get_cpu_var(cpu_idle_state) = 0;
@ -284,17 +288,17 @@ cpu_idle (void)
if (!idle)
idle = default_idle;
(*idle)();
}
if (mark_idle)
(*mark_idle)(0);
if (mark_idle)
(*mark_idle)(0);
#ifdef CONFIG_SMP
normal_xtp();
normal_xtp();
#endif
}
preempt_enable_no_resched();
schedule();
preempt_disable();
check_pgt_cache();
if (cpu_is_offline(smp_processor_id()))
if (cpu_is_offline(cpu))
play_dead();
}
}

View File

@ -399,6 +399,7 @@ start_secondary (void *unused)
Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id());
efi_map_pal_code();
cpu_init();
preempt_disable();
smp_callin();
cpu_idle();

View File

@ -212,13 +212,13 @@ void pcibr_target_interrupt(struct sn_irq_info *sn_irq_info)
pdi_pcibus_info;
/* Disable the device's IRQ */
pcireg_intr_enable_bit_clr(pcibus_info, bit);
pcireg_intr_enable_bit_clr(pcibus_info, (1 << bit));
/* Change the device's IRQ */
pcireg_intr_addr_addr_set(pcibus_info, bit, xtalk_addr);
/* Re-enable the device's IRQ */
pcireg_intr_enable_bit_set(pcibus_info, bit);
pcireg_intr_enable_bit_set(pcibus_info, (1 << bit));
pcibr_force_interrupt(sn_irq_info);
}

View File

@ -131,7 +131,7 @@ void pcireg_intr_enable_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits)
__sn_clrq_relaxed(&ptr->tio.cp_int_enable, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
__sn_clrq_relaxed(&ptr->pic.p_int_enable, ~bits);
__sn_clrq_relaxed(&ptr->pic.p_int_enable, bits);
break;
default:
panic

View File

@ -104,7 +104,9 @@ void cpu_idle (void)
idle();
}
preempt_enable_no_resched();
schedule();
preempt_disable();
}
}

View File

@ -426,6 +426,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
int __init start_secondary(void *unused)
{
cpu_init();
preempt_disable();
smp_callin();
while (!cpu_isset(smp_processor_id(), smp_commenced_mask))
cpu_relax();

View File

@ -102,7 +102,9 @@ void cpu_idle(void)
while (1) {
while (!need_resched())
idle();
preempt_enable_no_resched();
schedule();
preempt_disable();
}
}

View File

@ -111,17 +111,6 @@ void __init plat_setup(void)
}
#endif
#ifdef CONFIG_FB_E1356
if ((argptr = strstr(argptr, "video=")) == NULL) {
argptr = prom_getcmdline();
#ifdef CONFIG_MIPS_PB1000
strcat(argptr, " video=e1356fb:system:pb1000,mmunalign:1");
#else
strcat(argptr, " video=e1356fb:system:pb1500");
#endif
}
#endif
#ifdef CONFIG_FB_XPERT98
if ((argptr = strstr(argptr, "video=")) == NULL) {
argptr = prom_getcmdline();

View File

@ -658,7 +658,6 @@ CONFIG_FB=y
# CONFIG_FB_SMIVGX is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_E1356 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set

View File

@ -628,7 +628,6 @@ CONFIG_FB=y
# CONFIG_FB_SMIVGX is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_E1356 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set

View File

@ -758,7 +758,6 @@ CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_SMIVGX is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_E1356 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set

View File

@ -897,7 +897,6 @@ CONFIG_FB=y
# CONFIG_FB_SMIVGX is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_E1356 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set

View File

@ -876,7 +876,6 @@ CONFIG_FB_ATY_CT=y
# CONFIG_FB_SMIVGX is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_E1356 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set

View File

@ -26,10 +26,8 @@ long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg);
#define CODE
#include "compat_ioctl.c"
typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *);
#define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL((cmd),sys_ioctl)
#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl32_handler_t)(handler), NULL },
#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl_trans_handler_t)(handler), NULL },
#define IOCTL_TABLE_START \
struct ioctl_trans ioctl_start[] = {
#define IOCTL_TABLE_END \

View File

@ -52,7 +52,9 @@ ATTRIB_NORET void cpu_idle(void)
while (!need_resched())
if (cpu_wait)
(*cpu_wait)();
preempt_enable_no_resched();
schedule();
preempt_disable();
}
}

View File

@ -82,7 +82,7 @@ extern ATTRIB_NORET void cpu_idle(void);
*/
asmlinkage void start_secondary(void)
{
unsigned int cpu = smp_processor_id();
unsigned int cpu;
cpu_probe();
cpu_report();
@ -95,6 +95,8 @@ asmlinkage void start_secondary(void)
*/
calibrate_delay();
preempt_disable();
cpu = smp_processor_id();
cpu_data[cpu].udelay_val = loops_per_jiffy;
prom_smp_finish();

View File

@ -84,7 +84,6 @@ IRQ Device
#include <asm/ptrace.h>
#include <asm/reboot.h>
#include <asm/time.h>
#include <linux/version.h>
#include <linux/bootmem.h>
#include <asm/tx4938/rbtx4938.h>

View File

@ -30,7 +30,6 @@
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/thread_info.h>
#include <linux/version.h>
#include <linux/ptrace.h>
#include <linux/hardirq.h>

View File

@ -88,11 +88,15 @@ void default_idle(void)
*/
void cpu_idle(void)
{
set_thread_flag(TIF_POLLING_NRFLAG);
/* endless idle loop with no priority at all */
while (1) {
while (!need_resched())
barrier();
preempt_enable_no_resched();
schedule();
preempt_disable();
check_pgt_cache();
}
}

View File

@ -463,6 +463,7 @@ void __init smp_callin(void)
#endif
smp_cpu_init(slave_id);
preempt_disable();
#if 0 /* NOT WORKING YET - see entry.S */
istack = (void *)__get_free_pages(GFP_KERNEL,ISTACK_ORDER);

View File

@ -510,6 +510,7 @@ int __devinit start_secondary(void *unused)
smp_store_cpu_info(cpu);
set_dec(tb_ticks_per_jiffy);
preempt_disable();
cpu_callin_map[cpu] = 1;
smp_ops->setup_cpu(cpu);

View File

@ -887,10 +887,6 @@ void altivec_unavailable_exception(struct pt_regs *regs)
die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT);
}
#ifdef CONFIG_PPC64
extern perf_irq_t perf_irq;
#endif
#if defined(CONFIG_PPC64) || defined(CONFIG_E500)
void performance_monitor_exception(struct pt_regs *regs)
{

View File

@ -21,6 +21,7 @@
#include <asm/iommu.h>
#include <asm/dma.h>
#include <asm/vio.h>
#include <asm/prom.h>
static const struct vio_device_id *vio_match_device(
const struct vio_device_id *, const struct vio_dev *);
@ -265,7 +266,33 @@ static int vio_bus_match(struct device *dev, struct device_driver *drv)
return (ids != NULL) && (vio_match_device(ids, vio_dev) != NULL);
}
static int vio_hotplug(struct device *dev, char **envp, int num_envp,
char *buffer, int buffer_size)
{
const struct vio_dev *vio_dev = to_vio_dev(dev);
char *cp;
int length;
if (!num_envp)
return -ENOMEM;
if (!vio_dev->dev.platform_data)
return -ENODEV;
cp = (char *)get_property(vio_dev->dev.platform_data, "compatible", &length);
if (!cp)
return -ENODEV;
envp[0] = buffer;
length = scnprintf(buffer, buffer_size, "MODALIAS=vio:T%sS%s",
vio_dev->type, cp);
if (buffer_size - length <= 0)
return -ENOMEM;
envp[1] = NULL;
return 0;
}
struct bus_type vio_bus_type = {
.name = "vio",
.hotplug = vio_hotplug,
.match = vio_bus_match,
};

View File

@ -694,20 +694,19 @@ static void iseries_shared_idle(void)
if (hvlpevent_is_pending())
process_iSeries_events();
preempt_enable_no_resched();
schedule();
preempt_disable();
}
}
static void iseries_dedicated_idle(void)
{
long oldval;
set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED);
if (!oldval) {
set_thread_flag(TIF_POLLING_NRFLAG);
if (!need_resched()) {
while (!need_resched()) {
ppc64_runlatch_off();
HMT_low();
@ -720,13 +719,12 @@ static void iseries_dedicated_idle(void)
}
HMT_medium();
clear_thread_flag(TIF_POLLING_NRFLAG);
} else {
set_need_resched();
}
ppc64_runlatch_on();
preempt_enable_no_resched();
schedule();
preempt_disable();
}
}

View File

@ -469,6 +469,7 @@ static inline void dedicated_idle_sleep(unsigned int cpu)
* more.
*/
clear_thread_flag(TIF_POLLING_NRFLAG);
smp_mb__after_clear_bit();
/*
* SMT dynamic mode. Cede will result in this thread going
@ -481,6 +482,7 @@ static inline void dedicated_idle_sleep(unsigned int cpu)
cede_processor();
else
local_irq_enable();
set_thread_flag(TIF_POLLING_NRFLAG);
} else {
/*
* Give the HV an opportunity at the processor, since we are
@ -492,11 +494,11 @@ static inline void dedicated_idle_sleep(unsigned int cpu)
static void pseries_dedicated_idle(void)
{
long oldval;
struct paca_struct *lpaca = get_paca();
unsigned int cpu = smp_processor_id();
unsigned long start_snooze;
unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay);
set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
/*
@ -505,10 +507,7 @@ static void pseries_dedicated_idle(void)
*/
lpaca->lppaca.idle = 1;
oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED);
if (!oldval) {
set_thread_flag(TIF_POLLING_NRFLAG);
if (!need_resched()) {
start_snooze = __get_tb() +
*smt_snooze_delay * tb_ticks_per_usec;
@ -531,15 +530,14 @@ static void pseries_dedicated_idle(void)
}
HMT_medium();
clear_thread_flag(TIF_POLLING_NRFLAG);
} else {
set_need_resched();
}
lpaca->lppaca.idle = 0;
ppc64_runlatch_on();
preempt_enable_no_resched();
schedule();
preempt_disable();
if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
cpu_die();
@ -583,7 +581,9 @@ static void pseries_shared_idle(void)
lpaca->lppaca.idle = 0;
ppc64_runlatch_on();
preempt_enable_no_resched();
schedule();
preempt_disable();
if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
cpu_die();

View File

@ -1,16 +1,17 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-rc4
# Thu Feb 17 16:12:23 2005
# Linux kernel version: 2.6.14
# Mon Nov 7 15:38:29 2005
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@ -18,23 +19,28 @@ CONFIG_GENERIC_NVRAM=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@ -44,6 +50,7 @@ CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
@ -59,44 +66,90 @@ CONFIG_6xx=y
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
# CONFIG_E500 is not set
CONFIG_PPC_FPU=y
# CONFIG_KEXEC is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_PPC_GEN550=y
CONFIG_83xx=y
#
# Freescale 83xx options
#
CONFIG_MPC834x_SYS=y
CONFIG_MPC834x=y
CONFIG_PPC_STD_MMU=y
#
# Platform options
#
# CONFIG_PPC_MULTIPLATFORM is not set
# CONFIG_APUS is not set
# CONFIG_KATANA is not set
# CONFIG_WILLOW is not set
# CONFIG_CPCI690 is not set
# CONFIG_POWERPMC250 is not set
# CONFIG_CHESTNUT is not set
# CONFIG_SPRUCE is not set
# CONFIG_HDPU is not set
# CONFIG_EV64260 is not set
# CONFIG_LOPEC is not set
# CONFIG_MVME5100 is not set
# CONFIG_PPLUS is not set
# CONFIG_PRPMC750 is not set
# CONFIG_PRPMC800 is not set
# CONFIG_SANDPOINT is not set
# CONFIG_RADSTONE_PPC7D is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_EST8260 is not set
# CONFIG_SBC82xx is not set
# CONFIG_SBS8260 is not set
# CONFIG_RPX8260 is not set
# CONFIG_TQM8260 is not set
# CONFIG_ADS8272 is not set
# CONFIG_PQ2FADS is not set
# CONFIG_LITE5200 is not set
CONFIG_MPC834x_SYS=y
# CONFIG_EV64360 is not set
CONFIG_83xx=y
CONFIG_MPC834x=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_SOFTWARE_SUSPEND is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PPC_I8259 is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_MPC83xx_PCI2 is not set
CONFIG_PCI_LEGACY_PROC=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PC-card bridges
#
#
# Advanced setup
#
@ -111,6 +164,75 @@ CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
@ -122,6 +244,11 @@ CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
@ -140,15 +267,19 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
@ -159,6 +290,11 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ATA_OVER_ETH is not set
#
@ -169,6 +305,7 @@ CONFIG_IOSCHED_CFQ=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@ -179,110 +316,116 @@ CONFIG_IOSCHED_CFQ=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
# Network device support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_GIANFAR=y
# CONFIG_GFAR_NAPI is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
@ -293,10 +436,14 @@ CONFIG_GIANFAR=y
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@ -322,14 +469,6 @@ CONFIG_INPUT=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
# CONFIG_SERIO_I8042 is not set
#
# Input Device Drivers
#
@ -339,6 +478,12 @@ CONFIG_SOUND_GAMEPORT=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
@ -358,6 +503,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@ -376,6 +522,7 @@ CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
@ -384,6 +531,12 @@ CONFIG_GEN_RTC=y
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
@ -400,48 +553,41 @@ CONFIG_I2C_CHARDEV=y
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@ -452,10 +598,55 @@ CONFIG_I2C_MPC=y
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
@ -479,11 +670,12 @@ CONFIG_I2C_MPC=y
#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
@ -501,11 +693,16 @@ CONFIG_I2C_MPC=y
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@ -515,17 +712,16 @@ CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@ -546,12 +742,10 @@ CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@ -580,6 +774,7 @@ CONFIG_NFS_FS=y
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@ -588,6 +783,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
@ -614,6 +810,7 @@ CONFIG_PARTITION_ADVANCED=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
@ -625,7 +822,9 @@ CONFIG_CRC32=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_SERIAL_TEXT_DEBUG is not set
#

View File

@ -53,10 +53,6 @@ void default_idle(void)
}
#endif
}
if (need_resched())
schedule();
if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
cpu_die();
}
/*
@ -64,11 +60,22 @@ void default_idle(void)
*/
void cpu_idle(void)
{
for (;;)
if (ppc_md.idle != NULL)
ppc_md.idle();
else
default_idle();
int cpu = smp_processor_id();
for (;;) {
while (!need_resched()) {
if (ppc_md.idle != NULL)
ppc_md.idle();
else
default_idle();
}
if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
cpu_die();
preempt_enable_no_resched();
schedule();
preempt_disable();
}
}
#if defined(CONFIG_SYSCTL) && defined(CONFIG_6xx)

Some files were not shown because too many files have changed in this diff Show More