From 9d4f13e531b4722fe40cc8e28c02a495bdd49267 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 3 Jan 2006 17:28:33 +0000 Subject: [PATCH 01/36] [ARM] Make kernel link address depend on PAGE_OFFSET We are coding the kernel link address into the makefiles, which is invisibly dependent on PAGE_OFFSET. If PAGE_OFFSET is changed, the makefiles also need to be changed. Make adjustments such that the makefiles encode just the offset from PAGE_OFFSET for the kernel link address, and use PAGE_OFFSET in the linker scripts directly. Signed-off-by: Russell King --- arch/arm/Makefile | 15 +++++++-------- arch/arm/boot/Makefile | 2 +- arch/arm/kernel/Makefile | 2 +- arch/arm/kernel/head.S | 2 ++ arch/arm/kernel/vmlinux.lds.S | 14 ++++++-------- 5 files changed, 17 insertions(+), 18 deletions(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 81bd2193fe6d..afaf3a1e903c 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -8,7 +8,7 @@ # Copyright (C) 1995-2001 by Russell King LDFLAGS_vmlinux :=-p --no-undefined -X -CPPFLAGS_vmlinux.lds = -DKERNEL_RAM_ADDR=$(TEXTADDR) +CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET) OBJCOPYFLAGS :=-O binary -R .note -R .comment -S GZFLAGS :=-9 #CFLAGS +=-pipe @@ -65,7 +65,7 @@ CHECKFLAGS += -D__arm__ #Default value head-y := arch/arm/kernel/head.o arch/arm/kernel/init_task.o -textaddr-y := 0xC0008000 +textofs-y := 0x00008000 machine-$(CONFIG_ARCH_RPC) := rpc machine-$(CONFIG_ARCH_EBSA110) := ebsa110 @@ -73,22 +73,20 @@ textaddr-y := 0xC0008000 incdir-$(CONFIG_ARCH_CLPS7500) := cl7500 machine-$(CONFIG_FOOTBRIDGE) := footbridge incdir-$(CONFIG_FOOTBRIDGE) := ebsa285 -textaddr-$(CONFIG_ARCH_CO285) := 0x60008000 machine-$(CONFIG_ARCH_CO285) := footbridge incdir-$(CONFIG_ARCH_CO285) := ebsa285 machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SA1100) := sa1100 ifeq ($(CONFIG_ARCH_SA1100),y) # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory -textaddr-$(CONFIG_SA1111) := 0xc0208000 + textofs-$(CONFIG_SA1111) := 0x00208000 endif machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_L7200) := l7200 machine-$(CONFIG_ARCH_INTEGRATOR) := integrator machine-$(CONFIG_ARCH_CAMELOT) := epxa10db -textaddr-$(CONFIG_ARCH_CLPS711X) := 0xc0028000 + textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 machine-$(CONFIG_ARCH_CLPS711X) := clps711x -textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000 machine-$(CONFIG_ARCH_IOP3XX) := iop3xx machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_IXP2000) := ixp2000 @@ -110,7 +108,8 @@ CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL export CFLAGS_3c589_cs.o endif -TEXTADDR := $(textaddr-y) +# The byte offset of the kernel image in RAM from the start of RAM. +TEXT_OFFSET := $(textofs-y) ifeq ($(incdir-y),) incdir-y := $(machine-y) @@ -123,7 +122,7 @@ else MACHINE := endif -export TEXTADDR GZFLAGS +export TEXT_OFFSET GZFLAGS # Do we have FASTFPE? FASTFPE :=arch/arm/fastfpe diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 937a353bc37c..a174d63395ea 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -15,7 +15,7 @@ include $(srctree)/$(MACHINE)/Makefile.boot endif # Note: the following conditions must always be true: -# ZRELADDR == virt_to_phys(TEXTADDR) +# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) # PARAMS_PHYS must be within 4MB of ZRELADDR # INITRD_PHYS must be in RAM ZRELADDR := $(zreladdr-y) diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index c11169b5ed9a..25b14c3fdc4a 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -AFLAGS_head.o := -DKERNEL_RAM_ADDR=$(TEXTADDR) +AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) # Object file lists. diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index d7d69fd7039f..1e985f2cd70f 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -33,6 +33,8 @@ #define MACHINFO_PGOFFIO 12 #define MACHINFO_NAME 16 +#define KERNEL_RAM_ADDR (PAGE_OFFSET + TEXT_OFFSET) + /* * swapper_pg_dir is the virtual address of the initial page table. * We place the page tables 16K below KERNEL_RAM_ADDR. Therefore, we must diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 9a47770114d4..2b254e88595c 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -17,15 +17,13 @@ jiffies = jiffies_64; jiffies = jiffies_64 + 4; #endif -#ifdef CONFIG_XIP_KERNEL -#define TEXTADDR XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) -#else -#define TEXTADDR KERNEL_RAM_ADDR -#endif - SECTIONS { - . = TEXTADDR; +#ifdef CONFIG_XIP_KERNEL + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR); +#else + . = PAGE_OFFSET + TEXT_OFFSET; +#endif .init : { /* Init code and data */ _stext = .; _sinittext = .; @@ -104,7 +102,7 @@ SECTIONS #ifdef CONFIG_XIP_KERNEL __data_loc = ALIGN(4); /* location in binary */ - . = KERNEL_RAM_ADDR; + . = PAGE_OFFSET + TEXT_OFFSET; #else . = ALIGN(THREAD_SIZE); __data_loc = .; From 78ff18a412da24a4b79c6a97000ef5e467e813da Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 3 Jan 2006 17:39:34 +0000 Subject: [PATCH 02/36] [ARM] Cleanup ARM includes arch/arm/kernel/entry-armv.S has contained a comment suggesting that asm/hardware.h and asm/arch/irqs.h should be moved into the asm/arch/entry-macro.S include. So move the includes to these two files as required. Add missing includes (asm/hardware.h, asm/io.h) to asm/arch/system.h includes which use those facilities, and remove asm/io.h from kernel/process.c. Remove other unnecessary includes from arch/arm/kernel, arch/arm/mm and arch/arm/mach-footbridge. Signed-off-by: Russell King --- arch/arm/kernel/dma.c | 2 -- arch/arm/kernel/entry-armv.S | 2 -- arch/arm/kernel/process.c | 3 +-- arch/arm/kernel/setup.c | 2 -- arch/arm/kernel/time.c | 3 --- arch/arm/kernel/traps.c | 1 - arch/arm/mach-footbridge/dma.c | 1 + arch/arm/mm/consistent.c | 1 - arch/arm/mm/discontig.c | 4 +--- arch/arm/mm/mm-armv.c | 1 - include/asm-arm/arch-cl7500/entry-macro.S | 2 +- include/asm-arm/arch-clps711x/entry-macro.S | 1 + include/asm-arm/arch-clps711x/system.h | 2 ++ include/asm-arm/arch-ebsa285/entry-macro.S | 2 ++ include/asm-arm/arch-imx/entry-macro.S | 2 ++ include/asm-arm/arch-integrator/entry-macro.S | 2 ++ include/asm-arm/arch-iop3xx/entry-macro.S | 1 + include/asm-arm/arch-ixp2000/entry-macro.S | 1 + include/asm-arm/arch-ixp4xx/entry-macro.S | 1 + include/asm-arm/arch-l7200/system.h | 2 ++ include/asm-arm/arch-lh7a40x/entry-macro.S | 2 ++ include/asm-arm/arch-omap/entry-macro.S | 2 ++ include/asm-arm/arch-pxa/entry-macro.S | 2 ++ include/asm-arm/arch-realview/entry-macro.S | 2 +- include/asm-arm/arch-rpc/entry-macro.S | 2 +- include/asm-arm/arch-s3c2410/entry-macro.S | 2 ++ include/asm-arm/arch-versatile/entry-macro.S | 4 +++- include/asm-arm/cacheflush.h | 1 - 28 files changed, 31 insertions(+), 22 deletions(-) diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index 2b7883884234..8d6381cd8915 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -12,8 +12,6 @@ * DMA facilities. */ #include -#include -#include #include #include #include diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 2a8d27e18fa7..a52baedf6262 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -18,8 +18,6 @@ #include #include #include -#include /* should be moved into entry-macro.S */ -#include /* should be moved into entry-macro.S */ #include #include "entry-header.S" diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 30494aab829a..54a21bdcba5c 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -28,10 +28,9 @@ #include #include -#include -#include #include #include +#include #include #include diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 85774165e9fd..2cab741ad0f8 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -26,8 +26,6 @@ #include #include -#include -#include #include #include #include diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index fc4729106a32..d7d932c02866 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -29,9 +29,6 @@ #include #include -#include -#include -#include #include #include #include diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 45e9ea6cd2a5..c9fe6f5f7ee3 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -23,7 +23,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c index a6b1396b0951..7a54578b51af 100644 --- a/arch/arm/mach-footbridge/dma.c +++ b/arch/arm/mach-footbridge/dma.c @@ -15,6 +15,7 @@ #include #include +#include #include #include diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c index dbfe9e891f01..0513ed1b2fcf 100644 --- a/arch/arm/mm/consistent.c +++ b/arch/arm/mm/consistent.c @@ -19,7 +19,6 @@ #include #include -#include #include #define CONSISTENT_BASE (0xffc00000) diff --git a/arch/arm/mm/discontig.c b/arch/arm/mm/discontig.c index 0d097bb1bc4d..1e5602189507 100644 --- a/arch/arm/mm/discontig.c +++ b/arch/arm/mm/discontig.c @@ -9,10 +9,8 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include -#include -#include +#include #include #if MAX_NUMNODES != 4 && MAX_NUMNODES != 16 diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index 9e50127be635..d0245a31d4dd 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -19,7 +19,6 @@ #include #include -#include #include #include diff --git a/include/asm-arm/arch-cl7500/entry-macro.S b/include/asm-arm/arch-cl7500/entry-macro.S index 686f413f82d6..c9e5395e5106 100644 --- a/include/asm-arm/arch-cl7500/entry-macro.S +++ b/include/asm-arm/arch-cl7500/entry-macro.S @@ -1,3 +1,3 @@ - +#include #include diff --git a/include/asm-arm/arch-clps711x/entry-macro.S b/include/asm-arm/arch-clps711x/entry-macro.S index b31079a1d4a9..21f6ee485819 100644 --- a/include/asm-arm/arch-clps711x/entry-macro.S +++ b/include/asm-arm/arch-clps711x/entry-macro.S @@ -7,6 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +#include #include .macro disable_fiq diff --git a/include/asm-arm/arch-clps711x/system.h b/include/asm-arm/arch-clps711x/system.h index 2ab981fee37f..11e1491535a8 100644 --- a/include/asm-arm/arch-clps711x/system.h +++ b/include/asm-arm/arch-clps711x/system.h @@ -20,7 +20,9 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H +#include #include +#include static inline void arch_idle(void) { diff --git a/include/asm-arm/arch-ebsa285/entry-macro.S b/include/asm-arm/arch-ebsa285/entry-macro.S index db5729ff6349..cf10ac96fdde 100644 --- a/include/asm-arm/arch-ebsa285/entry-macro.S +++ b/include/asm-arm/arch-ebsa285/entry-macro.S @@ -7,6 +7,8 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +#include +#include #include .macro disable_fiq diff --git a/include/asm-arm/arch-imx/entry-macro.S b/include/asm-arm/arch-imx/entry-macro.S index b40ea7cf88ec..3b9ef6914627 100644 --- a/include/asm-arm/arch-imx/entry-macro.S +++ b/include/asm-arm/arch-imx/entry-macro.S @@ -7,6 +7,8 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +#include + .macro disable_fiq .endm #define AITC_NIVECSR 0x40 diff --git a/include/asm-arm/arch-integrator/entry-macro.S b/include/asm-arm/arch-integrator/entry-macro.S index 44f7ee613194..69838d04f90b 100644 --- a/include/asm-arm/arch-integrator/entry-macro.S +++ b/include/asm-arm/arch-integrator/entry-macro.S @@ -7,6 +7,8 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +#include +#include .macro disable_fiq .endm diff --git a/include/asm-arm/arch-iop3xx/entry-macro.S b/include/asm-arm/arch-iop3xx/entry-macro.S index e2ce7f5467c8..926668c098a5 100644 --- a/include/asm-arm/arch-iop3xx/entry-macro.S +++ b/include/asm-arm/arch-iop3xx/entry-macro.S @@ -7,6 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +#include #if defined(CONFIG_ARCH_IOP321) .macro disable_fiq diff --git a/include/asm-arm/arch-ixp2000/entry-macro.S b/include/asm-arm/arch-ixp2000/entry-macro.S index e3a4e4121298..16e1e6124b31 100644 --- a/include/asm-arm/arch-ixp2000/entry-macro.S +++ b/include/asm-arm/arch-ixp2000/entry-macro.S @@ -7,6 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +#include .macro disable_fiq .endm diff --git a/include/asm-arm/arch-ixp4xx/entry-macro.S b/include/asm-arm/arch-ixp4xx/entry-macro.S index 323b0bc4a39c..27e124132e4c 100644 --- a/include/asm-arm/arch-ixp4xx/entry-macro.S +++ b/include/asm-arm/arch-ixp4xx/entry-macro.S @@ -7,6 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +#include .macro disable_fiq .endm diff --git a/include/asm-arm/arch-l7200/system.h b/include/asm-arm/arch-l7200/system.h index cb4ff29059b8..18825cf071ba 100644 --- a/include/asm-arm/arch-l7200/system.h +++ b/include/asm-arm/arch-l7200/system.h @@ -12,6 +12,8 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H +#include + static inline void arch_idle(void) { *(unsigned long *)(IO_BASE + 0x50004) = 1; /* idle mode */ diff --git a/include/asm-arm/arch-lh7a40x/entry-macro.S b/include/asm-arm/arch-lh7a40x/entry-macro.S index 865f396aa63c..a2f67c06d9c9 100644 --- a/include/asm-arm/arch-lh7a40x/entry-macro.S +++ b/include/asm-arm/arch-lh7a40x/entry-macro.S @@ -7,6 +7,8 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +#include +#include # if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404) # error "LH7A400 and LH7A404 are mutually exclusive" diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S index f8814a84910e..0ffb1185f1ac 100644 --- a/include/asm-arm/arch-omap/entry-macro.S +++ b/include/asm-arm/arch-omap/entry-macro.S @@ -7,6 +7,8 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +#include +#include #if defined(CONFIG_ARCH_OMAP1) diff --git a/include/asm-arm/arch-pxa/entry-macro.S b/include/asm-arm/arch-pxa/entry-macro.S index 2abfc8bb3ee5..4985e33afc12 100644 --- a/include/asm-arm/arch-pxa/entry-macro.S +++ b/include/asm-arm/arch-pxa/entry-macro.S @@ -7,6 +7,8 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +#include +#include .macro disable_fiq .endm diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S index 6288fad0dc41..1a6eec86bd47 100644 --- a/include/asm-arm/arch-realview/entry-macro.S +++ b/include/asm-arm/arch-realview/entry-macro.S @@ -7,7 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include #include .macro disable_fiq diff --git a/include/asm-arm/arch-rpc/entry-macro.S b/include/asm-arm/arch-rpc/entry-macro.S index 686f413f82d6..c9e5395e5106 100644 --- a/include/asm-arm/arch-rpc/entry-macro.S +++ b/include/asm-arm/arch-rpc/entry-macro.S @@ -1,3 +1,3 @@ - +#include #include diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S index b7d4d7f4422d..cc06b1bd37b2 100644 --- a/include/asm-arm/arch-s3c2410/entry-macro.S +++ b/include/asm-arm/arch-s3c2410/entry-macro.S @@ -10,6 +10,8 @@ * Modifications: * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA */ +#include +#include .macro get_irqnr_and_base, irqnr, irqstat, base, tmp diff --git a/include/asm-arm/arch-versatile/entry-macro.S b/include/asm-arm/arch-versatile/entry-macro.S index 90e4e970d253..58f0d71759f6 100644 --- a/include/asm-arm/arch-versatile/entry-macro.S +++ b/include/asm-arm/arch-versatile/entry-macro.S @@ -7,7 +7,9 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - .macro disable_fiq +#include + + .macro disable_fiq .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index e81baff4f54b..09e19a783a51 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -14,7 +14,6 @@ #include #include -#include #include #include From f47fc0ac7ead5ed91a11fcabfad6ee44c17ee934 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 3 Jan 2006 18:34:20 +0000 Subject: [PATCH 03/36] [ARM] Add additional documentation to the clock source framework It seems that there's some confusion over how the clock source framework should be used. Add some additional comments to explain the ambiguous areas. Signed-off-by: Russell King --- include/asm-arm/hardware/clock.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/include/asm-arm/hardware/clock.h b/include/asm-arm/hardware/clock.h index 19da861e523d..5c5689409a4b 100644 --- a/include/asm-arm/hardware/clock.h +++ b/include/asm-arm/hardware/clock.h @@ -33,6 +33,8 @@ struct clk; * uses @dev and @id to determine the clock consumer, and thereby * the clock producer. (IOW, @id may be identical strings, but * clk_get may return different clock producers depending on @dev.) + * + * Drivers must assume that the clock source is not enabled. */ struct clk *clk_get(struct device *dev, const char *id); @@ -49,6 +51,14 @@ int clk_enable(struct clk *clk); /** * clk_disable - inform the system when the clock source is no longer required. * @clk: clock source + * + * Inform the system that a clock source is no longer required by + * a driver and may be shut down. + * + * Implementation detail: if the clock source is shared between + * multiple drivers, clk_enable() calls must be balanced by the + * same number of clk_disable() calls for the clock source to be + * disabled. */ void clk_disable(struct clk *clk); @@ -76,6 +86,10 @@ unsigned long clk_get_rate(struct clk *clk); /** * clk_put - "free" the clock source * @clk: clock source + * + * Note: drivers must ensure that all clk_enable calls made on this + * clock source are balanced by clk_disable calls prior to calling + * this function. */ void clk_put(struct clk *clk); From a8d3584a2df28827094f6338cde1303c467bc1f0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 3 Jan 2006 18:41:37 +0000 Subject: [PATCH 04/36] [ARM] Remove clk_use()/clk_unuse() It seems that clk_use() and clk_unuse() are additional complexity which isn't required anymore. Remove them from the clock framework to avoid the additional confusion which they cause, and update all ARM machine types except for OMAP. Signed-off-by: Russell King --- arch/arm/mach-aaec2000/clock.c | 11 ----------- arch/arm/mach-integrator/clock.c | 11 ----------- arch/arm/mach-realview/clock.c | 11 ----------- arch/arm/mach-s3c2410/clock.c | 15 --------------- arch/arm/mach-s3c2410/clock.h | 1 - arch/arm/mach-s3c2410/time.c | 1 - arch/arm/mach-versatile/clock.c | 11 ----------- drivers/char/watchdog/s3c2410_wdt.c | 2 -- drivers/i2c/busses/i2c-s3c2410.c | 2 -- drivers/input/serio/ambakmi.c | 9 +-------- drivers/mmc/mmci.c | 9 +-------- drivers/mtd/nand/s3c2410.c | 2 -- drivers/serial/amba-pl011.c | 7 ------- drivers/serial/s3c2410.c | 5 ----- drivers/usb/host/ohci-s3c2410.c | 2 -- drivers/video/amba-clcd.c | 9 +-------- drivers/video/s3c2410fb.c | 3 --- include/asm-arm/hardware/clock.h | 14 -------------- 18 files changed, 3 insertions(+), 122 deletions(-) diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c index 0340ddc4824e..828208348b76 100644 --- a/arch/arm/mach-aaec2000/clock.c +++ b/arch/arm/mach-aaec2000/clock.c @@ -58,17 +58,6 @@ void clk_disable(struct clk *clk) } EXPORT_SYMBOL(clk_disable); -int clk_use(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_use); - -void clk_unuse(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_unuse); - unsigned long clk_get_rate(struct clk *clk) { return clk->rate; diff --git a/arch/arm/mach-integrator/clock.c b/arch/arm/mach-integrator/clock.c index 73c360685cad..bbfe46cd91fe 100644 --- a/arch/arm/mach-integrator/clock.c +++ b/arch/arm/mach-integrator/clock.c @@ -58,17 +58,6 @@ void clk_disable(struct clk *clk) } EXPORT_SYMBOL(clk_disable); -int clk_use(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_use); - -void clk_unuse(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_unuse); - unsigned long clk_get_rate(struct clk *clk) { return clk->rate; diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c index 002635c97bb6..331e1b483aa7 100644 --- a/arch/arm/mach-realview/clock.c +++ b/arch/arm/mach-realview/clock.c @@ -57,17 +57,6 @@ void clk_disable(struct clk *clk) } EXPORT_SYMBOL(clk_disable); -int clk_use(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_use); - -void clk_unuse(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_unuse); - unsigned long clk_get_rate(struct clk *clk) { return clk->rate; diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index 82e8253b1fa0..77f321fac281 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -151,18 +151,6 @@ void clk_disable(struct clk *clk) } -int clk_use(struct clk *clk) -{ - atomic_inc(&clk->used); - return 0; -} - - -void clk_unuse(struct clk *clk) -{ - atomic_dec(&clk->used); -} - unsigned long clk_get_rate(struct clk *clk) { if (IS_ERR(clk)) @@ -196,8 +184,6 @@ EXPORT_SYMBOL(clk_get); EXPORT_SYMBOL(clk_put); EXPORT_SYMBOL(clk_enable); EXPORT_SYMBOL(clk_disable); -EXPORT_SYMBOL(clk_use); -EXPORT_SYMBOL(clk_unuse); EXPORT_SYMBOL(clk_get_rate); EXPORT_SYMBOL(clk_round_rate); EXPORT_SYMBOL(clk_set_rate); @@ -370,7 +356,6 @@ static struct clk init_clocks[] = { int s3c24xx_register_clock(struct clk *clk) { clk->owner = THIS_MODULE; - atomic_set(&clk->used, 0); if (clk->enable == NULL) clk->enable = clk_null_enable; diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h index 7953b6f397b9..177d5c8decf7 100644 --- a/arch/arm/mach-s3c2410/clock.h +++ b/arch/arm/mach-s3c2410/clock.h @@ -16,7 +16,6 @@ struct clk { struct clk *parent; const char *name; int id; - atomic_t used; unsigned long rate; unsigned long ctrlbit; int (*enable)(struct clk *, int enable); diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c index 8a00e3c3cd08..9acda44b25a6 100644 --- a/arch/arm/mach-s3c2410/time.c +++ b/arch/arm/mach-s3c2410/time.c @@ -191,7 +191,6 @@ static void s3c2410_timer_setup (void) if (IS_ERR(clk)) panic("failed to get clock for system timer"); - clk_use(clk); clk_enable(clk); pclk = clk_get_rate(clk); diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c index b96a2ea15d41..ada3142da8dc 100644 --- a/arch/arm/mach-versatile/clock.c +++ b/arch/arm/mach-versatile/clock.c @@ -58,17 +58,6 @@ void clk_disable(struct clk *clk) } EXPORT_SYMBOL(clk_disable); -int clk_use(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_use); - -void clk_unuse(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_unuse); - unsigned long clk_get_rate(struct clk *clk) { return clk->rate; diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c index eb667daee19b..621e8a99e733 100644 --- a/drivers/char/watchdog/s3c2410_wdt.c +++ b/drivers/char/watchdog/s3c2410_wdt.c @@ -397,7 +397,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev) return -ENOENT; } - clk_use(wdt_clock); clk_enable(wdt_clock); /* see if we can actually set the requested timer margin, and if @@ -444,7 +443,6 @@ static int s3c2410wdt_remove(struct platform_device *dev) if (wdt_clock != NULL) { clk_disable(wdt_clock); - clk_unuse(wdt_clock); clk_put(wdt_clock); wdt_clock = NULL; } diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 58cfd3111ef6..2a2f86d8c2d8 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -738,7 +738,6 @@ static void s3c24xx_i2c_free(struct s3c24xx_i2c *i2c) { if (i2c->clk != NULL && !IS_ERR(i2c->clk)) { clk_disable(i2c->clk); - clk_unuse(i2c->clk); clk_put(i2c->clk); i2c->clk = NULL; } @@ -778,7 +777,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk); - clk_use(i2c->clk); clk_enable(i2c->clk); /* map the registers */ diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c index 9b1ab5e7a98d..d847ed51cfb1 100644 --- a/drivers/input/serio/ambakmi.c +++ b/drivers/input/serio/ambakmi.c @@ -72,13 +72,9 @@ static int amba_kmi_open(struct serio *io) unsigned int divisor; int ret; - ret = clk_use(kmi->clk); - if (ret) - goto out; - ret = clk_enable(kmi->clk); if (ret) - goto clk_unuse; + goto out; divisor = clk_get_rate(kmi->clk) / 8000000 - 1; writeb(divisor, KMICLKDIV); @@ -97,8 +93,6 @@ static int amba_kmi_open(struct serio *io) clk_disable: clk_disable(kmi->clk); - clk_unuse: - clk_unuse(kmi->clk); out: return ret; } @@ -111,7 +105,6 @@ static void amba_kmi_close(struct serio *io) free_irq(kmi->irq, kmi); clk_disable(kmi->clk); - clk_unuse(kmi->clk); } static int amba_kmi_probe(struct amba_device *dev, void *id) diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c index 166c9b0ad04e..31b0b6d612bf 100644 --- a/drivers/mmc/mmci.c +++ b/drivers/mmc/mmci.c @@ -479,13 +479,9 @@ static int mmci_probe(struct amba_device *dev, void *id) goto host_free; } - ret = clk_use(host->clk); - if (ret) - goto clk_free; - ret = clk_enable(host->clk); if (ret) - goto clk_unuse; + goto clk_free; host->plat = plat; host->mclk = clk_get_rate(host->clk); @@ -558,8 +554,6 @@ static int mmci_probe(struct amba_device *dev, void *id) iounmap(host->base); clk_disable: clk_disable(host->clk); - clk_unuse: - clk_unuse(host->clk); clk_free: clk_put(host->clk); host_free: @@ -594,7 +588,6 @@ static int mmci_remove(struct amba_device *dev) iounmap(host->base); clk_disable(host->clk); - clk_unuse(host->clk); clk_put(host->clk); mmc_free_host(mmc); diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index d209214b1318..b796a9a6b924 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -460,7 +460,6 @@ static int s3c2410_nand_remove(struct platform_device *pdev) if (info->clk != NULL && !IS_ERR(info->clk)) { clk_disable(info->clk); - clk_unuse(info->clk); clk_put(info->clk); } @@ -598,7 +597,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, int is_s3c2440) goto exit_error; } - clk_use(info->clk); clk_enable(info->clk); /* allocate and map the resource */ diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index d84476ee6592..531b0e4f25e5 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -761,10 +761,6 @@ static int pl011_probe(struct amba_device *dev, void *id) goto unmap; } - ret = clk_use(uap->clk); - if (ret) - goto putclk; - uap->port.dev = &dev->dev; uap->port.mapbase = dev->res.start; uap->port.membase = base; @@ -782,8 +778,6 @@ static int pl011_probe(struct amba_device *dev, void *id) if (ret) { amba_set_drvdata(dev, NULL); amba_ports[i] = NULL; - clk_unuse(uap->clk); - putclk: clk_put(uap->clk); unmap: iounmap(base); @@ -808,7 +802,6 @@ static int pl011_remove(struct amba_device *dev) amba_ports[i] = NULL; iounmap(uap->port.membase); - clk_unuse(uap->clk); clk_put(uap->clk); kfree(uap); return 0; diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index 47681c4654e4..eb47f5b71aeb 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -782,11 +782,9 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { clk_disable(ourport->baudclk); - clk_unuse(ourport->baudclk); ourport->baudclk = NULL; } - clk_use(clk); clk_enable(clk); ourport->clksrc = clksrc; @@ -1077,9 +1075,6 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, ourport->clk = clk_get(&platdev->dev, "uart"); - if (ourport->clk != NULL && !IS_ERR(ourport->clk)) - clk_use(ourport->clk); - dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n", port->mapbase, port->membase, port->irq, port->uartclk); diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 35cc9402adc0..add198a4be79 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -363,7 +363,6 @@ int usb_hcd_s3c2410_probe (const struct hc_driver *driver, goto err1; } - clk_use(clk); s3c2410_start_hc(dev, hcd); hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); @@ -384,7 +383,6 @@ int usb_hcd_s3c2410_probe (const struct hc_driver *driver, err2: s3c2410_stop_hc(dev); iounmap(hcd->regs); - clk_unuse(clk); clk_put(clk); err1: diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index a3c2c45e29e0..69421c86252c 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -346,10 +346,6 @@ static int clcdfb_register(struct clcd_fb *fb) goto out; } - ret = clk_use(fb->clk); - if (ret) - goto free_clk; - fb->fb.fix.mmio_start = fb->dev->res.start; fb->fb.fix.mmio_len = SZ_4K; @@ -357,7 +353,7 @@ static int clcdfb_register(struct clcd_fb *fb) if (!fb->regs) { printk(KERN_ERR "CLCD: unable to remap registers\n"); ret = -ENOMEM; - goto unuse_clk; + goto free_clk; } fb->fb.fbops = &clcdfb_ops; @@ -427,8 +423,6 @@ static int clcdfb_register(struct clcd_fb *fb) printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret); iounmap(fb->regs); - unuse_clk: - clk_unuse(fb->clk); free_clk: clk_put(fb->clk); out: @@ -489,7 +483,6 @@ static int clcdfb_remove(struct amba_device *dev) clcdfb_disable(fb); unregister_framebuffer(&fb->fb); iounmap(fb->regs); - clk_unuse(fb->clk); clk_put(fb->clk); fb->board->remove(fb); diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index ce6e749db3a7..d9c08cc7ac44 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -746,7 +746,6 @@ int __init s3c2410fb_probe(struct platform_device *pdev) goto release_irq; } - clk_use(info->clk); clk_enable(info->clk); dprintk("got and enabled clock\n"); @@ -783,7 +782,6 @@ free_video_memory: s3c2410fb_unmap_video_memory(info); release_clock: clk_disable(info->clk); - clk_unuse(info->clk); clk_put(info->clk); release_irq: free_irq(irq,info); @@ -828,7 +826,6 @@ static int s3c2410fb_remove(struct platform_device *pdev) if (info->clk) { clk_disable(info->clk); - clk_unuse(info->clk); clk_put(info->clk); info->clk = NULL; } diff --git a/include/asm-arm/hardware/clock.h b/include/asm-arm/hardware/clock.h index 5c5689409a4b..69f33215e437 100644 --- a/include/asm-arm/hardware/clock.h +++ b/include/asm-arm/hardware/clock.h @@ -62,20 +62,6 @@ int clk_enable(struct clk *clk); */ void clk_disable(struct clk *clk); -/** - * clk_use - increment the use count - * @clk: clock source - * - * Returns success (0) or negative errno. - */ -int clk_use(struct clk *clk); - -/** - * clk_unuse - decrement the use count - * @clk: clock source - */ -void clk_unuse(struct clk *clk); - /** * clk_get_rate - obtain the current clock rate (in Hz) for a clock source. * This is only valid once the clock source has been enabled. From 109a9378807cb9093a88fbf9707420de97601e14 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 4 Jan 2006 14:06:31 +0000 Subject: [PATCH 05/36] [ARM] Remove unused dma.c files CLPS711x, EPXA10DB and Integrator contained a dma.c file which has never been built. Remove these redundant files. Signed-off-by: Russell King --- arch/arm/mach-clps711x/dma.c | 27 -------------------------- arch/arm/mach-epxa10db/dma.c | 28 --------------------------- arch/arm/mach-integrator/dma.c | 35 ---------------------------------- 3 files changed, 90 deletions(-) delete mode 100644 arch/arm/mach-clps711x/dma.c delete mode 100644 arch/arm/mach-epxa10db/dma.c delete mode 100644 arch/arm/mach-integrator/dma.c diff --git a/arch/arm/mach-clps711x/dma.c b/arch/arm/mach-clps711x/dma.c deleted file mode 100644 index af5a4de38eac..000000000000 --- a/arch/arm/mach-clps711x/dma.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/dma.c - * - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include - -#include -#include - -void __init arch_dma_init(dma_t *dma) -{ -} diff --git a/arch/arm/mach-epxa10db/dma.c b/arch/arm/mach-epxa10db/dma.c deleted file mode 100644 index 0151e9f1c066..000000000000 --- a/arch/arm/mach-epxa10db/dma.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * linux/arch/arm/mach-epxa10db/dma.c - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include - -#include -#include - -void __init arch_dma_init(dma_t *dma) -{ -} diff --git a/arch/arm/mach-integrator/dma.c b/arch/arm/mach-integrator/dma.c deleted file mode 100644 index aae6f23cd72b..000000000000 --- a/arch/arm/mach-integrator/dma.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/arch/arm/mach-integrator/dma.c - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -void __init arch_dma_init(dma_t *dma) -{ -} From 333c9624b728a9e83b741ea75836aa114ec35272 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 4 Jan 2006 14:41:29 +0000 Subject: [PATCH 06/36] [ARM] Move ISA DMA bus_to_virt() out of set_dma_addr() Allow the compiler to optimise the bus_to_virt(virt_to_bus()) transformation in the ARM ISA DMA interface. Signed-off-by: Russell King --- arch/arm/kernel/dma.c | 8 ++++---- include/asm-arm/dma.h | 4 +++- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index 8d6381cd8915..3aedada71046 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -131,7 +131,7 @@ void set_dma_sg (dmach_t channel, struct scatterlist *sg, int nr_sg) * * Copy address to the structure, and set the invalid bit */ -void set_dma_addr (dmach_t channel, unsigned long physaddr) +void __set_dma_addr (dmach_t channel, void *addr) { dma_t *dma = dma_chan + channel; @@ -141,7 +141,7 @@ void set_dma_addr (dmach_t channel, unsigned long physaddr) dma->sg = &dma->buf; dma->sgcount = 1; - dma->buf.__address = bus_to_virt(physaddr); + dma->buf.__address = addr; dma->using_sg = 0; dma->invalid = 1; } @@ -278,7 +278,7 @@ GLOBAL_ALIAS(get_dma_list, get_dma_residue); GLOBAL_ALIAS(set_dma_mode, get_dma_residue); GLOBAL_ALIAS(set_dma_page, get_dma_residue); GLOBAL_ALIAS(set_dma_count, get_dma_residue); -GLOBAL_ALIAS(set_dma_addr, get_dma_residue); +GLOBAL_ALIAS(__set_dma_addr, get_dma_residue); GLOBAL_ALIAS(set_dma_sg, get_dma_residue); GLOBAL_ALIAS(set_dma_speed, get_dma_residue); GLOBAL_ALIAS(init_dma, get_dma_residue); @@ -289,7 +289,7 @@ EXPORT_SYMBOL(request_dma); EXPORT_SYMBOL(free_dma); EXPORT_SYMBOL(enable_dma); EXPORT_SYMBOL(disable_dma); -EXPORT_SYMBOL(set_dma_addr); +EXPORT_SYMBOL(__set_dma_addr); EXPORT_SYMBOL(set_dma_count); EXPORT_SYMBOL(set_dma_mode); EXPORT_SYMBOL(set_dma_page); diff --git a/include/asm-arm/dma.h b/include/asm-arm/dma.h index ef41df43a584..1c7087f9364c 100644 --- a/include/asm-arm/dma.h +++ b/include/asm-arm/dma.h @@ -91,7 +91,9 @@ extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg); * especially since some DMA architectures don't update the * DMA address immediately, but defer it to the enable_dma(). */ -extern void set_dma_addr(dmach_t channel, unsigned long physaddr); +extern void __set_dma_addr(dmach_t channel, void *addr); +#define set_dma_addr(channel, addr) \ + __set_dma_addr(channel, bus_to_virt(addr)) /* Set the DMA byte count for this channel * From 7cdad482974792419cfe4b0affca689170116f49 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 4 Jan 2006 15:08:30 +0000 Subject: [PATCH 07/36] [ARM] Remove '__address' from scatterlist and convert to DMA API The old __address element in struct scatterlist remained from older kernels because the ARM DMA emulation code made use of it. Move this field into struct dma_struct, and convert DMA emulation code to setup a SG entry as required. Also, convert DMA emulation code to use the new DMA API rather than the PCI DMA API. Signed-off-by: Russell King --- arch/arm/kernel/dma-isa.c | 22 +++++++++++++--------- arch/arm/kernel/dma.c | 13 ++++--------- arch/arm/mach-rpc/dma.c | 19 +++++++++++-------- include/asm-arm/mach/dma.h | 4 +++- include/asm-arm/scatterlist.h | 1 - 5 files changed, 31 insertions(+), 28 deletions(-) diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c index e9a36304ec3e..03532769a97f 100644 --- a/arch/arm/kernel/dma-isa.c +++ b/arch/arm/kernel/dma-isa.c @@ -18,7 +18,7 @@ */ #include #include -#include +#include #include #include @@ -65,37 +65,41 @@ static void isa_enable_dma(dmach_t channel, dma_t *dma) { if (dma->invalid) { unsigned long address, length; - unsigned int mode, direction; + unsigned int mode; + enum dma_data_direction direction; mode = channel & 3; switch (dma->dma_mode & DMA_MODE_MASK) { case DMA_MODE_READ: mode |= ISA_DMA_MODE_READ; - direction = PCI_DMA_FROMDEVICE; + direction = DMA_FROM_DEVICE; break; case DMA_MODE_WRITE: mode |= ISA_DMA_MODE_WRITE; - direction = PCI_DMA_TODEVICE; + direction = DMA_TO_DEVICE; break; case DMA_MODE_CASCADE: mode |= ISA_DMA_MODE_CASCADE; - direction = PCI_DMA_BIDIRECTIONAL; + direction = DMA_BIDIRECTIONAL; break; default: - direction = PCI_DMA_NONE; + direction = DMA_NONE; break; } - if (!dma->using_sg) { + if (!dma->sg) { /* * Cope with ISA-style drivers which expect cache * coherence. */ - dma->buf.dma_address = pci_map_single(NULL, - dma->buf.__address, dma->buf.length, + dma->sg = &dma->buf; + dma->sgcount = 1; + dma->buf.length = dma->count; + dma->buf.dma_address = dma_map_single(NULL, + dma->addr, dma->count, direction); } diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index 3aedada71046..913fd947528c 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -123,7 +123,6 @@ void set_dma_sg (dmach_t channel, struct scatterlist *sg, int nr_sg) dma->sg = sg; dma->sgcount = nr_sg; - dma->using_sg = 1; dma->invalid = 1; } @@ -139,10 +138,8 @@ void __set_dma_addr (dmach_t channel, void *addr) printk(KERN_ERR "dma%d: altering DMA address while " "DMA active\n", channel); - dma->sg = &dma->buf; - dma->sgcount = 1; - dma->buf.__address = addr; - dma->using_sg = 0; + dma->sg = NULL; + dma->addr = addr; dma->invalid = 1; } @@ -158,10 +155,8 @@ void set_dma_count (dmach_t channel, unsigned long count) printk(KERN_ERR "dma%d: altering DMA count while " "DMA active\n", channel); - dma->sg = &dma->buf; - dma->sgcount = 1; - dma->buf.length = count; - dma->using_sg = 0; + dma->sg = NULL; + dma->count = count; dma->invalid = 1; } diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index bc0747439fb3..bd86ffba8810 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include @@ -148,11 +148,14 @@ static void iomd_enable_dma(dmach_t channel, dma_t *dma) * Cope with ISA-style drivers which expect cache * coherence. */ - if (!dma->using_sg) { - dma->buf.dma_address = pci_map_single(NULL, - dma->buf.__address, dma->buf.length, + if (!dma->sg) { + dma->sg = &dma->buf; + dma->sgcount = 1; + dma->buf.length = dma->count; + dma->buf.dma_address = dma_map_single(NULL, + dma->addr, dma->count, dma->dma_mode == DMA_MODE_READ ? - PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE); + DMA_FROM_DEVICE : DMA_TO_DEVICE); } iomd_writeb(DMA_CR_C, dma_base + CR); @@ -239,7 +242,7 @@ static void floppy_enable_dma(dmach_t channel, dma_t *dma) unsigned int fiqhandler_length; struct pt_regs regs; - if (dma->using_sg) + if (dma->sg) BUG(); if (dma->dma_mode == DMA_MODE_READ) { @@ -252,8 +255,8 @@ static void floppy_enable_dma(dmach_t channel, dma_t *dma) fiqhandler_length = &floppy_fiqout_end - &floppy_fiqout_start; } - regs.ARM_r9 = dma->buf.length; - regs.ARM_r10 = (unsigned long)dma->buf.__address; + regs.ARM_r9 = dma->count; + regs.ARM_r10 = (unsigned long)dma->addr; regs.ARM_fp = (unsigned long)FLOPPYDMA_BASE; if (claim_fiq(&fh)) { diff --git a/include/asm-arm/mach/dma.h b/include/asm-arm/mach/dma.h index 31bf716106ee..e7c4a20aad53 100644 --- a/include/asm-arm/mach/dma.h +++ b/include/asm-arm/mach/dma.h @@ -25,13 +25,15 @@ struct dma_ops { }; struct dma_struct { + void *addr; /* single DMA address */ + unsigned long count; /* single DMA size */ struct scatterlist buf; /* single DMA */ int sgcount; /* number of DMA SG */ struct scatterlist *sg; /* DMA Scatter-Gather List */ unsigned int active:1; /* Transfer active */ unsigned int invalid:1; /* Address/Count changed */ - unsigned int using_sg:1; /* using scatter list? */ + dmamode_t dma_mode; /* DMA mode */ int speed; /* DMA speed */ diff --git a/include/asm-arm/scatterlist.h b/include/asm-arm/scatterlist.h index 83b876fb04cc..de2f65eb42ed 100644 --- a/include/asm-arm/scatterlist.h +++ b/include/asm-arm/scatterlist.h @@ -9,7 +9,6 @@ struct scatterlist { unsigned int offset; /* buffer offset */ dma_addr_t dma_address; /* dma address */ unsigned int length; /* length */ - char *__address; /* for set_dma_addr */ }; /* From 6842b9299272a9471a7e94e046b953f6ffe3db9d Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 4 Jan 2006 15:17:08 +0000 Subject: [PATCH 08/36] [ARM] Use core_initcall() to initialise ARM DMA There's no need to have DMA initialised at the same time as interrupts. Move it to a core_initcall(). Signed-off-by: Russell King --- arch/arm/kernel/dma.c | 6 ++++-- arch/arm/kernel/irq.c | 2 -- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index 913fd947528c..3b325ef55a28 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -248,11 +248,14 @@ int get_dma_residue(dmach_t channel) return ret; } -void __init init_dma(void) +static int __init init_dma(void) { arch_dma_init(dma_chan); + return 0; } +core_initcall(init_dma); + #else int request_dma(dmach_t channel, const char *device_id) @@ -276,7 +279,6 @@ GLOBAL_ALIAS(set_dma_count, get_dma_residue); GLOBAL_ALIAS(__set_dma_addr, get_dma_residue); GLOBAL_ALIAS(set_dma_sg, get_dma_residue); GLOBAL_ALIAS(set_dma_speed, get_dma_residue); -GLOBAL_ALIAS(init_dma, get_dma_residue); #endif diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index d7099dbbb879..869c466e6258 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -1027,7 +1027,6 @@ void __init init_irq_proc(void) void __init init_IRQ(void) { struct irqdesc *desc; - extern void init_dma(void); int irq; #ifdef CONFIG_SMP @@ -1041,7 +1040,6 @@ void __init init_IRQ(void) } init_arch_irq(); - init_dma(); } static int __init noirqdebug_setup(char *str) From d4c6fc9976dd70a27abc988ddbd6a746c1dba0a7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 4 Jan 2006 15:30:48 +0000 Subject: [PATCH 09/36] [ARM] Move common definition of MAX_DMA_ADDRESS to asm/dma.h Signed-off-by: Russell King --- include/asm-arm/arch-aaec2000/dma.h | 1 - include/asm-arm/arch-clps711x/dma.h | 2 -- include/asm-arm/arch-ebsa110/dma.h | 1 - include/asm-arm/arch-ebsa285/dma.h | 5 ----- include/asm-arm/arch-epxa10db/dma.h | 2 -- include/asm-arm/arch-imx/dma.h | 2 -- include/asm-arm/arch-integrator/dma.h | 2 -- include/asm-arm/arch-iop3xx/dma.h | 2 -- include/asm-arm/arch-ixp2000/dma.h | 2 -- include/asm-arm/arch-lh7a40x/dma.h | 1 - include/asm-arm/arch-omap/dma.h | 1 - include/asm-arm/arch-pxa/dma.h | 2 -- include/asm-arm/arch-realview/dma.h | 1 - include/asm-arm/arch-sa1100/dma.h | 6 ------ include/asm-arm/arch-versatile/dma.h | 1 - include/asm-arm/dma.h | 7 +++++++ 16 files changed, 7 insertions(+), 31 deletions(-) diff --git a/include/asm-arm/arch-aaec2000/dma.h b/include/asm-arm/arch-aaec2000/dma.h index 28c890b4a1d3..c42212c9ea79 100644 --- a/include/asm-arm/arch-aaec2000/dma.h +++ b/include/asm-arm/arch-aaec2000/dma.h @@ -11,7 +11,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#define MAX_DMA_ADDRESS 0xffffffff #define MAX_DMA_CHANNELS 0 #endif diff --git a/include/asm-arm/arch-clps711x/dma.h b/include/asm-arm/arch-clps711x/dma.h index 3c4c5c843252..c35f87d0bf7a 100644 --- a/include/asm-arm/arch-clps711x/dma.h +++ b/include/asm-arm/arch-clps711x/dma.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#define MAX_DMA_ADDRESS 0xffffffff - #define MAX_DMA_CHANNELS 0 #endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-ebsa110/dma.h b/include/asm-arm/arch-ebsa110/dma.h index d491776ac1cc..f1add1343edc 100644 --- a/include/asm-arm/arch-ebsa110/dma.h +++ b/include/asm-arm/arch-ebsa110/dma.h @@ -12,7 +12,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#define MAX_DMA_ADDRESS 0xffffffff #define MAX_DMA_CHANNELS 0 #endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-ebsa285/dma.h b/include/asm-arm/arch-ebsa285/dma.h index c43046eb8bc7..0259ad45d33c 100644 --- a/include/asm-arm/arch-ebsa285/dma.h +++ b/include/asm-arm/arch-ebsa285/dma.h @@ -9,11 +9,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -/* - * This is the maximum DMA address that can be DMAd to. - */ -#define MAX_DMA_ADDRESS 0xffffffff - /* * The 21285 has two internal DMA channels; we call these 8 and 9. * On CATS hardware we have an additional eight ISA dma channels diff --git a/include/asm-arm/arch-epxa10db/dma.h b/include/asm-arm/arch-epxa10db/dma.h index 5d97734d1077..6e13e6bb8b1d 100644 --- a/include/asm-arm/arch-epxa10db/dma.h +++ b/include/asm-arm/arch-epxa10db/dma.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#define MAX_DMA_ADDRESS 0xffffffff - #define MAX_DMA_CHANNELS 0 #endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-imx/dma.h b/include/asm-arm/arch-imx/dma.h index dbdc01780413..0b8f39adc9a7 100644 --- a/include/asm-arm/arch-imx/dma.h +++ b/include/asm-arm/arch-imx/dma.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#define MAX_DMA_ADDRESS 0xffffffff - #define MAX_DMA_CHANNELS 0 /* diff --git a/include/asm-arm/arch-integrator/dma.h b/include/asm-arm/arch-integrator/dma.h index 7171792290bd..6f934f6d838a 100644 --- a/include/asm-arm/arch-integrator/dma.h +++ b/include/asm-arm/arch-integrator/dma.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#define MAX_DMA_ADDRESS 0xffffffff - #define MAX_DMA_CHANNELS 0 #endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-iop3xx/dma.h b/include/asm-arm/arch-iop3xx/dma.h index 797f9e6fc745..58ec24db415d 100644 --- a/include/asm-arm/arch-iop3xx/dma.h +++ b/include/asm-arm/arch-iop3xx/dma.h @@ -11,6 +11,4 @@ #ifndef _IOP3XX_DMA_H_P #define _IOP3XX_DMA_H_P -#define MAX_DMA_ADDRESS 0xffffffff - #endif /* _ASM_ARCH_DMA_H_P */ diff --git a/include/asm-arm/arch-ixp2000/dma.h b/include/asm-arm/arch-ixp2000/dma.h index 0fb3568a98dd..3af382551cda 100644 --- a/include/asm-arm/arch-ixp2000/dma.h +++ b/include/asm-arm/arch-ixp2000/dma.h @@ -10,8 +10,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#define MAX_DMA_ADDRESS 0xffffffff - /* No DMA */ #define MAX_DMA_CHANNELS 0 diff --git a/include/asm-arm/arch-lh7a40x/dma.h b/include/asm-arm/arch-lh7a40x/dma.h index 5797f01e1844..18f13689a405 100644 --- a/include/asm-arm/arch-lh7a40x/dma.h +++ b/include/asm-arm/arch-lh7a40x/dma.h @@ -11,7 +11,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#define MAX_DMA_ADDRESS 0xffffffff #define MAX_DMA_CHANNELS 0 /* All DMA is internal to CPU */ #endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h index ccbcb580a5c1..40c045404613 100644 --- a/include/asm-arm/arch-omap/dma.h +++ b/include/asm-arm/arch-omap/dma.h @@ -21,7 +21,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#define MAX_DMA_ADDRESS 0xffffffff #define MAX_DMA_CHANNELS 0 /* Hardware registers for omap1 */ diff --git a/include/asm-arm/arch-pxa/dma.h b/include/asm-arm/arch-pxa/dma.h index 56db3d49bfc8..7402bdafc163 100644 --- a/include/asm-arm/arch-pxa/dma.h +++ b/include/asm-arm/arch-pxa/dma.h @@ -12,8 +12,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#define MAX_DMA_ADDRESS 0xffffffff - /* No DMA as the rest of the world see it */ #define MAX_DMA_CHANNELS 0 diff --git a/include/asm-arm/arch-realview/dma.h b/include/asm-arm/arch-realview/dma.h index 744491a74bd9..d595cc90b069 100644 --- a/include/asm-arm/arch-realview/dma.h +++ b/include/asm-arm/arch-realview/dma.h @@ -21,7 +21,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#define MAX_DMA_ADDRESS 0xffffffff #define MAX_DMA_CHANNELS 0 #endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-sa1100/dma.h b/include/asm-arm/arch-sa1100/dma.h index 3d60ed9f8c34..a79c2d37c669 100644 --- a/include/asm-arm/arch-sa1100/dma.h +++ b/include/asm-arm/arch-sa1100/dma.h @@ -14,12 +14,6 @@ #include "hardware.h" -/* - * This is the maximum DMA address that can be DMAd to. - */ -#define MAX_DMA_ADDRESS 0xffffffff - - /* * The regular generic DMA interface is inappropriate for the * SA1100 DMA model. None of the SA1100 specific drivers using diff --git a/include/asm-arm/arch-versatile/dma.h b/include/asm-arm/arch-versatile/dma.h index dcc8ac26eac0..94b3fc5a6321 100644 --- a/include/asm-arm/arch-versatile/dma.h +++ b/include/asm-arm/arch-versatile/dma.h @@ -21,7 +21,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#define MAX_DMA_ADDRESS 0xffffffff #define MAX_DMA_CHANNELS 0 #endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/dma.h b/include/asm-arm/dma.h index 1c7087f9364c..49c01e2bf7c8 100644 --- a/include/asm-arm/dma.h +++ b/include/asm-arm/dma.h @@ -9,6 +9,13 @@ typedef unsigned int dmach_t; #include #include +/* + * This is the maximum virtual address which can be DMA'd from. + */ +#ifndef MAX_DMA_ADDRESS +#define MAX_DMA_ADDRESS 0xffffffff +#endif + /* * DMA modes */ From 065909b91581cf2438d901a7811a82af3476bdab Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 4 Jan 2006 15:44:16 +0000 Subject: [PATCH 10/36] [ARM] Refine selection of ISA_DMA_API and generic dma.c code ISA_DMA_API tells the rest of the kernel if the ISA DMA API is available. Select this symbol only on machine types which make use of the ISA DMA API. Make building of arch/arm/kernel/dma.c depend on this symbol - if a machine does not support the ISA DMA API, it's pointless building this file. Signed-off-by: Russell King --- arch/arm/Kconfig | 6 +++++- arch/arm/kernel/Makefile | 3 ++- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4b15f5f1e254..cb413109da0c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -154,6 +154,7 @@ config ARCH_RPC select FIQ select TIMER_ACORN select ARCH_MAY_HAVE_PC_FDC + select ISA_DMA_API help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -206,6 +207,7 @@ config ARCH_IMX config ARCH_H720X bool "Hynix-HMS720x-based" + select ISA_DMA_API help This enables support for systems based on the Hynix HMS720x @@ -290,12 +292,14 @@ config ISA (MCA) or VESA. ISA is an older system, now being displaced by PCI; newer boards don't support it. If you have ISA, say Y, otherwise N. +# Select ISA DMA controller support config ISA_DMA bool + select ISA_DMA_API +# Select ISA DMA interface config ISA_DMA_API bool - default y config PCI bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 25b14c3fdc4a..de94b0f3ee2a 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -6,11 +6,12 @@ AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) # Object file lists. -obj-y := compat.o dma.o entry-armv.o entry-common.o irq.o \ +obj-y := compat.o entry-armv.o entry-common.o irq.o \ process.o ptrace.o semaphore.o setup.o signal.o sys_arm.o \ time.o traps.o obj-$(CONFIG_APM) += apm.o +obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_ARCH_ACORN) += ecard.o obj-$(CONFIG_FOOTBRIDGE) += isa.o obj-$(CONFIG_FIQ) += fiq.o From 95ba9fb06be4a8714c98df6097eab1808c72fa98 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 4 Jan 2006 15:51:51 +0000 Subject: [PATCH 11/36] [ARM] Remove definition of MAX_DMA_CHANNELS to zero Since we now only build arch/arm/kernel/dma.c on machine types which set ISA_DMA_API, we don't need to define MAX_DMA_CHANNELS to 0 to indicate this - this definition becomes superfluous. Remove it. Signed-off-by: Russell King --- arch/arm/kernel/dma.c | 28 --------------------------- include/asm-arm/arch-aaec2000/dma.h | 7 ------- include/asm-arm/arch-cl7500/dma.h | 1 - include/asm-arm/arch-clps711x/dma.h | 7 ------- include/asm-arm/arch-ebsa110/dma.h | 7 ------- include/asm-arm/arch-epxa10db/dma.h | 7 ------- include/asm-arm/arch-imx/dma.h | 2 -- include/asm-arm/arch-integrator/dma.h | 7 ------- include/asm-arm/arch-iop3xx/dma.h | 5 ----- include/asm-arm/arch-ixp2000/dma.h | 7 ------- include/asm-arm/arch-ixp4xx/dma.h | 3 --- include/asm-arm/arch-l7200/dma.h | 1 - include/asm-arm/arch-lh7a40x/dma.h | 7 ------- include/asm-arm/arch-omap/dma.h | 2 -- include/asm-arm/arch-pxa/dma.h | 3 --- include/asm-arm/arch-realview/dma.h | 6 ------ include/asm-arm/arch-s3c2410/dma.h | 8 -------- include/asm-arm/arch-sa1100/dma.h | 8 -------- include/asm-arm/arch-versatile/dma.h | 6 ------ 19 files changed, 122 deletions(-) diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index 3b325ef55a28..62c8966a8b77 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -22,8 +22,6 @@ DEFINE_SPINLOCK(dma_spin_lock); -#if MAX_DMA_CHANNELS > 0 - static dma_t dma_chan[MAX_DMA_CHANNELS]; /* @@ -256,32 +254,6 @@ static int __init init_dma(void) core_initcall(init_dma); -#else - -int request_dma(dmach_t channel, const char *device_id) -{ - return -EINVAL; -} - -int get_dma_residue(dmach_t channel) -{ - return 0; -} - -#define GLOBAL_ALIAS(_a,_b) asm (".set " #_a "," #_b "; .globl " #_a) -GLOBAL_ALIAS(disable_dma, get_dma_residue); -GLOBAL_ALIAS(enable_dma, get_dma_residue); -GLOBAL_ALIAS(free_dma, get_dma_residue); -GLOBAL_ALIAS(get_dma_list, get_dma_residue); -GLOBAL_ALIAS(set_dma_mode, get_dma_residue); -GLOBAL_ALIAS(set_dma_page, get_dma_residue); -GLOBAL_ALIAS(set_dma_count, get_dma_residue); -GLOBAL_ALIAS(__set_dma_addr, get_dma_residue); -GLOBAL_ALIAS(set_dma_sg, get_dma_residue); -GLOBAL_ALIAS(set_dma_speed, get_dma_residue); - -#endif - EXPORT_SYMBOL(request_dma); EXPORT_SYMBOL(free_dma); EXPORT_SYMBOL(enable_dma); diff --git a/include/asm-arm/arch-aaec2000/dma.h b/include/asm-arm/arch-aaec2000/dma.h index c42212c9ea79..e100b1e526fe 100644 --- a/include/asm-arm/arch-aaec2000/dma.h +++ b/include/asm-arm/arch-aaec2000/dma.h @@ -7,10 +7,3 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#define MAX_DMA_CHANNELS 0 - -#endif diff --git a/include/asm-arm/arch-cl7500/dma.h b/include/asm-arm/arch-cl7500/dma.h index 1d6a8829d327..591ed2551892 100644 --- a/include/asm-arm/arch-cl7500/dma.h +++ b/include/asm-arm/arch-cl7500/dma.h @@ -15,7 +15,6 @@ * bytes of RAM. */ #define MAX_DMA_ADDRESS 0xd0000000 -#define MAX_DMA_CHANNELS 0 #define DMA_S0 0 diff --git a/include/asm-arm/arch-clps711x/dma.h b/include/asm-arm/arch-clps711x/dma.h index c35f87d0bf7a..610997938423 100644 --- a/include/asm-arm/arch-clps711x/dma.h +++ b/include/asm-arm/arch-clps711x/dma.h @@ -17,10 +17,3 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#define MAX_DMA_CHANNELS 0 - -#endif /* _ASM_ARCH_DMA_H */ - diff --git a/include/asm-arm/arch-ebsa110/dma.h b/include/asm-arm/arch-ebsa110/dma.h index f1add1343edc..c52f9e2ab0bb 100644 --- a/include/asm-arm/arch-ebsa110/dma.h +++ b/include/asm-arm/arch-ebsa110/dma.h @@ -9,10 +9,3 @@ * * EBSA110 DMA definitions */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#define MAX_DMA_CHANNELS 0 - -#endif /* _ASM_ARCH_DMA_H */ - diff --git a/include/asm-arm/arch-epxa10db/dma.h b/include/asm-arm/arch-epxa10db/dma.h index 6e13e6bb8b1d..de20ec8e74b1 100644 --- a/include/asm-arm/arch-epxa10db/dma.h +++ b/include/asm-arm/arch-epxa10db/dma.h @@ -17,10 +17,3 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#define MAX_DMA_CHANNELS 0 - -#endif /* _ASM_ARCH_DMA_H */ - diff --git a/include/asm-arm/arch-imx/dma.h b/include/asm-arm/arch-imx/dma.h index 0b8f39adc9a7..b45fa367d71e 100644 --- a/include/asm-arm/arch-imx/dma.h +++ b/include/asm-arm/arch-imx/dma.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#define MAX_DMA_CHANNELS 0 - /* * DMA registration */ diff --git a/include/asm-arm/arch-integrator/dma.h b/include/asm-arm/arch-integrator/dma.h index 6f934f6d838a..83fd6bbaf9d3 100644 --- a/include/asm-arm/arch-integrator/dma.h +++ b/include/asm-arm/arch-integrator/dma.h @@ -17,10 +17,3 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#define MAX_DMA_CHANNELS 0 - -#endif /* _ASM_ARCH_DMA_H */ - diff --git a/include/asm-arm/arch-iop3xx/dma.h b/include/asm-arm/arch-iop3xx/dma.h index 58ec24db415d..1e808db8af2a 100644 --- a/include/asm-arm/arch-iop3xx/dma.h +++ b/include/asm-arm/arch-iop3xx/dma.h @@ -7,8 +7,3 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - -#ifndef _IOP3XX_DMA_H_P -#define _IOP3XX_DMA_H_P - -#endif /* _ASM_ARCH_DMA_H_P */ diff --git a/include/asm-arm/arch-ixp2000/dma.h b/include/asm-arm/arch-ixp2000/dma.h index 3af382551cda..548d8dc507eb 100644 --- a/include/asm-arm/arch-ixp2000/dma.h +++ b/include/asm-arm/arch-ixp2000/dma.h @@ -7,10 +7,3 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* No DMA */ -#define MAX_DMA_CHANNELS 0 - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-ixp4xx/dma.h b/include/asm-arm/arch-ixp4xx/dma.h index 312065dc0e7a..b1a071ecebc8 100644 --- a/include/asm-arm/arch-ixp4xx/dma.h +++ b/include/asm-arm/arch-ixp4xx/dma.h @@ -20,7 +20,4 @@ #define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M) -/* No DMA */ -#define MAX_DMA_CHANNELS 0 - #endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-l7200/dma.h b/include/asm-arm/arch-l7200/dma.h index 6595b386cfc9..4c7eca63f035 100644 --- a/include/asm-arm/arch-l7200/dma.h +++ b/include/asm-arm/arch-l7200/dma.h @@ -17,7 +17,6 @@ * bytes of RAM. */ #define MAX_DMA_ADDRESS 0xd0000000 -#define MAX_DMA_CHANNELS 0 #define DMA_S0 0 diff --git a/include/asm-arm/arch-lh7a40x/dma.h b/include/asm-arm/arch-lh7a40x/dma.h index 18f13689a405..15492e3253f6 100644 --- a/include/asm-arm/arch-lh7a40x/dma.h +++ b/include/asm-arm/arch-lh7a40x/dma.h @@ -7,10 +7,3 @@ * version 2 as published by the Free Software Foundation. * */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#define MAX_DMA_CHANNELS 0 /* All DMA is internal to CPU */ - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h index 40c045404613..d4e73efcb816 100644 --- a/include/asm-arm/arch-omap/dma.h +++ b/include/asm-arm/arch-omap/dma.h @@ -21,8 +21,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#define MAX_DMA_CHANNELS 0 - /* Hardware registers for omap1 */ #define OMAP_DMA_BASE (0xfffed800) #define OMAP_DMA_GCR (OMAP_DMA_BASE + 0x400) diff --git a/include/asm-arm/arch-pxa/dma.h b/include/asm-arm/arch-pxa/dma.h index 7402bdafc163..3e88a2a02a0f 100644 --- a/include/asm-arm/arch-pxa/dma.h +++ b/include/asm-arm/arch-pxa/dma.h @@ -12,9 +12,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -/* No DMA as the rest of the world see it */ -#define MAX_DMA_CHANNELS 0 - /* * Descriptor structure for PXA's DMA engine * Note: this structure must always be aligned to a 16-byte boundary. diff --git a/include/asm-arm/arch-realview/dma.h b/include/asm-arm/arch-realview/dma.h index d595cc90b069..8342e3f9d6ec 100644 --- a/include/asm-arm/arch-realview/dma.h +++ b/include/asm-arm/arch-realview/dma.h @@ -18,9 +18,3 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#define MAX_DMA_CHANNELS 0 - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h index e830a40e573a..b011e14f3bc6 100644 --- a/include/asm-arm/arch-s3c2410/dma.h +++ b/include/asm-arm/arch-s3c2410/dma.h @@ -31,14 +31,6 @@ #define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ -/* according to the samsung port, we cannot use the regular - * dma channels... we must therefore provide our own interface - * for DMA, and allow our drivers to use that. - */ - -#define MAX_DMA_CHANNELS 0 - - /* we have 4 dma channels */ #define S3C2410_DMA_CHANNELS (4) diff --git a/include/asm-arm/arch-sa1100/dma.h b/include/asm-arm/arch-sa1100/dma.h index a79c2d37c669..02575d72ac6b 100644 --- a/include/asm-arm/arch-sa1100/dma.h +++ b/include/asm-arm/arch-sa1100/dma.h @@ -14,14 +14,6 @@ #include "hardware.h" -/* - * The regular generic DMA interface is inappropriate for the - * SA1100 DMA model. None of the SA1100 specific drivers using - * DMA are portable anyway so it's pointless to try to twist the - * regular DMA API to accommodate them. - */ -#define MAX_DMA_CHANNELS 0 - /* * The SA1100 has six internal DMA channels. */ diff --git a/include/asm-arm/arch-versatile/dma.h b/include/asm-arm/arch-versatile/dma.h index 94b3fc5a6321..642577348623 100644 --- a/include/asm-arm/arch-versatile/dma.h +++ b/include/asm-arm/arch-versatile/dma.h @@ -18,9 +18,3 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#define MAX_DMA_CHANNELS 0 - -#endif /* _ASM_ARCH_DMA_H */ From d7b4a75677f8f2a559b0c55a550b364e79a8d302 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 4 Jan 2006 15:52:45 +0000 Subject: [PATCH 12/36] [ARM] Move DMA exports to be next to each function Signed-off-by: Russell King --- arch/arm/kernel/dma.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index 62c8966a8b77..5a0f4bc5da95 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -21,6 +21,7 @@ #include DEFINE_SPINLOCK(dma_spin_lock); +EXPORT_SYMBOL(dma_spin_lock); static dma_t dma_chan[MAX_DMA_CHANNELS]; @@ -77,6 +78,7 @@ bad_dma: busy: return -EBUSY; } +EXPORT_SYMBOL(request_dma); /* * Free DMA channel @@ -108,6 +110,7 @@ void free_dma(dmach_t channel) bad_dma: printk(KERN_ERR "dma: trying to free DMA%d\n", channel); } +EXPORT_SYMBOL(free_dma); /* Set DMA Scatter-Gather list */ @@ -123,6 +126,7 @@ void set_dma_sg (dmach_t channel, struct scatterlist *sg, int nr_sg) dma->sgcount = nr_sg; dma->invalid = 1; } +EXPORT_SYMBOL(set_dma_sg); /* Set DMA address * @@ -140,6 +144,7 @@ void __set_dma_addr (dmach_t channel, void *addr) dma->addr = addr; dma->invalid = 1; } +EXPORT_SYMBOL(__set_dma_addr); /* Set DMA byte count * @@ -157,6 +162,7 @@ void set_dma_count (dmach_t channel, unsigned long count) dma->count = count; dma->invalid = 1; } +EXPORT_SYMBOL(set_dma_count); /* Set DMA direction mode */ @@ -171,6 +177,7 @@ void set_dma_mode (dmach_t channel, dmamode_t mode) dma->dma_mode = mode; dma->invalid = 1; } +EXPORT_SYMBOL(set_dma_mode); /* Enable DMA channel */ @@ -191,6 +198,7 @@ free_dma: printk(KERN_ERR "dma%d: trying to enable free DMA\n", channel); BUG(); } +EXPORT_SYMBOL(enable_dma); /* Disable DMA channel */ @@ -211,6 +219,7 @@ free_dma: printk(KERN_ERR "dma%d: trying to disable free DMA\n", channel); BUG(); } +EXPORT_SYMBOL(disable_dma); /* * Is the specified DMA channel active? @@ -224,6 +233,7 @@ void set_dma_page(dmach_t channel, char pagenr) { printk(KERN_ERR "dma%d: trying to set_dma_page\n", channel); } +EXPORT_SYMBOL(set_dma_page); void set_dma_speed(dmach_t channel, int cycle_ns) { @@ -234,6 +244,7 @@ void set_dma_speed(dmach_t channel, int cycle_ns) ret = dma->d_ops->setspeed(channel, dma, cycle_ns); dma->speed = ret; } +EXPORT_SYMBOL(set_dma_speed); int get_dma_residue(dmach_t channel) { @@ -245,6 +256,7 @@ int get_dma_residue(dmach_t channel) return ret; } +EXPORT_SYMBOL(get_dma_residue); static int __init init_dma(void) { @@ -253,17 +265,3 @@ static int __init init_dma(void) } core_initcall(init_dma); - -EXPORT_SYMBOL(request_dma); -EXPORT_SYMBOL(free_dma); -EXPORT_SYMBOL(enable_dma); -EXPORT_SYMBOL(disable_dma); -EXPORT_SYMBOL(__set_dma_addr); -EXPORT_SYMBOL(set_dma_count); -EXPORT_SYMBOL(set_dma_mode); -EXPORT_SYMBOL(set_dma_page); -EXPORT_SYMBOL(get_dma_residue); -EXPORT_SYMBOL(set_dma_sg); -EXPORT_SYMBOL(set_dma_speed); - -EXPORT_SYMBOL(dma_spin_lock); From b3a962455b106a1677f91c754e5315753c3d44c3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 4 Jan 2006 15:55:41 +0000 Subject: [PATCH 13/36] [ARM] Remove SA1100 PM prepare/finish ops These are empty, unnecessary functions, so remove them. Signed-off-by: Russell King --- arch/arm/mach-sa1100/pm.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index 59c7964cfe11..786c8534231f 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -134,30 +134,12 @@ unsigned long sleep_phys_sp(void *sp) return virt_to_phys(sp); } -/* - * Called after processes are frozen, but before we shut down devices. - */ -static int sa11x0_pm_prepare(suspend_state_t state) -{ - return 0; -} - -/* - * Called after devices are re-setup, but before processes are thawed. - */ -static int sa11x0_pm_finish(suspend_state_t state) -{ - return 0; -} - /* * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk. */ static struct pm_ops sa11x0_pm_ops = { .pm_disk_mode = PM_DISK_FIRMWARE, - .prepare = sa11x0_pm_prepare, .enter = sa11x0_pm_enter, - .finish = sa11x0_pm_finish, }; static int __init sa11x0_pm_init(void) From f7e8bbb8207c17afbd716e7e5fc785b78fa08571 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Wed, 4 Jan 2006 17:17:10 +0000 Subject: [PATCH 14/36] [ARM] 3192/1: Remove gpio_isr_line_clear() API from IXP4xx Patch from Deepak Saxena Other than interrupt masking purposes, this API is only used when configuring interrupt lines and this patch moves that functionality directly into the ixp4xx_set_irq_type() implementation as board level PCI code should not need to worry about those details. Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-ixp4xx/common.c | 4 +++- arch/arm/mach-ixp4xx/coyote-pci.c | 3 --- arch/arm/mach-ixp4xx/ixdp425-pci.c | 5 ----- arch/arm/mach-ixp4xx/ixdpg425-pci.c | 3 --- arch/arm/mach-ixp4xx/nslu2-pci.c | 8 -------- arch/arm/mach-ixp4xx/nslu2-power.c | 3 --- include/asm-arm/arch-ixp4xx/platform.h | 5 ----- 7 files changed, 3 insertions(+), 28 deletions(-) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index f3c687cf0071..9f33cb21e7f3 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -142,6 +142,8 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) *int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR << (line * IXP4XX_GPIO_STYLE_SIZE)); + *IXP4XX_GPIO_GPISR = (1 << line); + /* Set the new style */ *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); @@ -169,7 +171,7 @@ static void ixp4xx_irq_ack(unsigned int irq) int line = (irq < 32) ? irq2gpio[irq] : -1; if (line >= 0) - gpio_line_isr_clear(line); + *IXP4XX_GPIO_GPISR = (1 << line); } /* diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c index 60de8a94cff5..e6b7fcd923fa 100644 --- a/arch/arm/mach-ixp4xx/coyote-pci.c +++ b/arch/arm/mach-ixp4xx/coyote-pci.c @@ -33,9 +33,6 @@ void __init coyote_pci_preinit(void) set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW); set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW); - gpio_line_isr_clear(COYOTE_PCI_SLOT0_PIN); - gpio_line_isr_clear(COYOTE_PCI_SLOT1_PIN); - ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c index f9a1d3e7d692..da415d5d7f37 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c @@ -32,11 +32,6 @@ void __init ixdp425_pci_preinit(void) set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW); set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW); - gpio_line_isr_clear(IXDP425_PCI_INTA_PIN); - gpio_line_isr_clear(IXDP425_PCI_INTB_PIN); - gpio_line_isr_clear(IXDP425_PCI_INTC_PIN); - gpio_line_isr_clear(IXDP425_PCI_INTD_PIN); - ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c index fe5e7660de1d..526fb6175bc3 100644 --- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c @@ -32,9 +32,6 @@ void __init ixdpg425_pci_preinit(void) set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW); set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW); - gpio_line_isr_clear(6); - gpio_line_isr_clear(7); - ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c index a575f2e0b2c8..ece860444d5b 100644 --- a/arch/arm/mach-ixp4xx/nslu2-pci.c +++ b/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -28,14 +28,6 @@ void __init nslu2_pci_preinit(void) set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW); set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW); - gpio_line_isr_clear(NSLU2_PCI_INTA_PIN); - gpio_line_isr_clear(NSLU2_PCI_INTB_PIN); - gpio_line_isr_clear(NSLU2_PCI_INTC_PIN); - - /* INTD is not configured as GPIO is used - * for the power input button. - */ - ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c index 18fbc8c0fb30..b0ad9e901f6e 100644 --- a/arch/arm/mach-ixp4xx/nslu2-power.c +++ b/arch/arm/mach-ixp4xx/nslu2-power.c @@ -54,9 +54,6 @@ static int __init nslu2_power_init(void) set_irq_type(NSLU2_RB_IRQ, IRQT_LOW); set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH); - gpio_line_isr_clear(NSLU2_RB_GPIO); - gpio_line_isr_clear(NSLU2_PB_GPIO); - if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler, SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) { diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h index f14ed63590c3..6b77ed26be79 100644 --- a/include/asm-arm/arch-ixp4xx/platform.h +++ b/include/asm-arm/arch-ixp4xx/platform.h @@ -112,10 +112,5 @@ static inline void gpio_line_set(u8 line, int value) *IXP4XX_GPIO_GPOUTR &= ~(1 << line); } -static inline void gpio_line_isr_clear(u8 line) -{ - *IXP4XX_GPIO_GPISR = (1 << line); -} - #endif // __ASSEMBLY__ From 3145d8a6cc83ee15adf18f598873e53a54cd1841 Mon Sep 17 00:00:00 2001 From: Rod Whitby Date: Wed, 4 Jan 2006 17:17:11 +0000 Subject: [PATCH 15/36] [ARM] 3215/1: Iomega NAS 100d (MACH_NAS100D) machine support Patch from Rod Whitby This patch adds support for a new arm/ixp4xx machine - the Iomega NAS 100d network attached storage product. The NAS100D is a consumer device containing a 266MHz Intel IXP420 processor, 16MB of flash, 64MB of RAM, a 160Gb internal IDE hard disk, and 802.11b/g wireless on an Atheros mini-PCI card. Work on porting the latest 2.6.x kernel to this device is being done by the NSLU2-Linux project (the same team who maintains the port to the Linksys NSLU2 device). In particular, the majority of this patch was authored by Alessandro Zummo, based on the work done for MACH_NSLU2 support by the NSLU2-Linux core team of developers. MACH_NAS100D (as implemented by this patch) can be enabled in jumbo ixp4xx kernels without any affect on the other machines supported by that kernel. This patch applies cleanly against 2.6.15-rc7 and should be trivial to apply to later kernel versions. It does not depend upon any other patches. Modified files (and number of lines inserted): arch/arm/mach-ixp4xx/Kconfig | 8 arch/arm/mach-ixp4xx/Makefile | 1 include/asm-arm/arch-ixp4xx/hardware.h | 1 include/asm-arm/arch-ixp4xx/irqs.h | 9 include/asm-arm/arch-ixp4xx/nas100d.h | 75 arch/arm/mach-ixp4xx/nas100d-pci.c | 77 arch/arm/mach-ixp4xx/nas100d-power.c | 69 arch/arm/mach-ixp4xx/nas100d-setup.c | 133 -- Rod Whitby (NSLU2-Linux project lead) Signed-off-by: Rod Whitby Signed-off-by: Alessandro Zummo Signed-off-by: Russell King --- arch/arm/mach-ixp4xx/Kconfig | 8 ++ arch/arm/mach-ixp4xx/Makefile | 1 + arch/arm/mach-ixp4xx/nas100d-pci.c | 77 ++++++++++++++ arch/arm/mach-ixp4xx/nas100d-power.c | 69 +++++++++++++ arch/arm/mach-ixp4xx/nas100d-setup.c | 133 +++++++++++++++++++++++++ include/asm-arm/arch-ixp4xx/hardware.h | 1 + include/asm-arm/arch-ixp4xx/irqs.h | 9 ++ include/asm-arm/arch-ixp4xx/nas100d.h | 75 ++++++++++++++ 8 files changed, 373 insertions(+) create mode 100644 arch/arm/mach-ixp4xx/nas100d-pci.c create mode 100644 arch/arm/mach-ixp4xx/nas100d-power.c create mode 100644 arch/arm/mach-ixp4xx/nas100d-setup.c create mode 100644 include/asm-arm/arch-ixp4xx/nas100d.h diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 385285851cb5..daadc78e271b 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -71,6 +71,14 @@ config ARCH_PRPMC1100 PrPCM1100 Processor Mezanine Module. For more information on this platform, see . +config MACH_NAS100D + bool + prompt "NAS100D" + help + Say 'Y' here if you want your kernel to support Iomega's + NAS 100d device. For more information on this platform, + see http://www.nslu2-linux.org/wiki/NAS100d/HomePage + # # Avila and IXDP share the same source for now. Will change in future # diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index 7a15629c18d0..0471044fa179 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -9,4 +9,5 @@ obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o +obj-$(CONFIG_MACH_NAS100D) += nas100d-pci.o nas100d-setup.o nas100d-power.o diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c new file mode 100644 index 000000000000..9bd029462359 --- /dev/null +++ b/arch/arm/mach-ixp4xx/nas100d-pci.c @@ -0,0 +1,77 @@ +/* + * arch/arm/mach-ixp4xx/nas100d-pci.c + * + * NAS 100d board-level PCI initialization + * + * based on ixdp425-pci.c: + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Maintainer: http://www.nslu2-linux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include + +#include +#include + +void __init nas100d_pci_preinit(void) +{ + set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW); + + gpio_line_isr_clear(NAS100D_PCI_INTA_PIN); + gpio_line_isr_clear(NAS100D_PCI_INTB_PIN); + gpio_line_isr_clear(NAS100D_PCI_INTC_PIN); + gpio_line_isr_clear(NAS100D_PCI_INTD_PIN); + gpio_line_isr_clear(NAS100D_PCI_INTE_PIN); + + ixp4xx_pci_preinit(); +} + +static int __init nas100d_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[NAS100D_PCI_MAX_DEV][NAS100D_PCI_IRQ_LINES] = + { + { IRQ_NAS100D_PCI_INTA, -1, -1 }, + { IRQ_NAS100D_PCI_INTB, -1, -1 }, + { IRQ_NAS100D_PCI_INTC, IRQ_NAS100D_PCI_INTD, IRQ_NAS100D_PCI_INTE }, + }; + + int irq = -1; + + if (slot >= 1 && slot <= NAS100D_PCI_MAX_DEV && + pin >= 1 && pin <= NAS100D_PCI_IRQ_LINES) + irq = pci_irq_table[slot-1][pin-1]; + + return irq; +} + +struct hw_pci __initdata nas100d_pci = { + .nr_controllers = 1, + .preinit = nas100d_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = nas100d_map_irq, +}; + +int __init nas100d_pci_init(void) +{ + if (machine_is_nas100d()) + pci_common_init(&nas100d_pci); + + return 0; +} + +subsys_initcall(nas100d_pci_init); diff --git a/arch/arm/mach-ixp4xx/nas100d-power.c b/arch/arm/mach-ixp4xx/nas100d-power.c new file mode 100644 index 000000000000..c74a19004390 --- /dev/null +++ b/arch/arm/mach-ixp4xx/nas100d-power.c @@ -0,0 +1,69 @@ +/* + * arch/arm/mach-ixp4xx/nas100d-power.c + * + * NAS 100d Power/Reset driver + * + * Copyright (C) 2005 Tower Technologies + * + * based on nas100d-io.c + * Copyright (C) 2004 Karen Spearel + * + * Author: Alessandro Zummo + * Maintainers: http://www.nslu2-linux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include + +#include + +extern void ctrl_alt_del(void); + +static irqreturn_t nas100d_reset_handler(int irq, void *dev_id, struct pt_regs *regs) +{ + /* Signal init to do the ctrlaltdel action, this will bypass init if + * it hasn't started and do a kernel_restart. + */ + ctrl_alt_del(); + + return IRQ_HANDLED; +} + +static int __init nas100d_power_init(void) +{ + if (!(machine_is_nas100d())) + return 0; + + set_irq_type(NAS100D_RB_IRQ, IRQT_LOW); + + gpio_line_isr_clear(NAS100D_RB_GPIO); + + if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler, + SA_INTERRUPT, "NAS100D reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + NAS100D_RB_IRQ); + + return -EIO; + } + + return 0; +} + +static void __exit nas100d_power_exit(void) +{ + free_irq(NAS100D_RB_IRQ, NULL); +} + +module_init(nas100d_power_init); +module_exit(nas100d_power_exit); + +MODULE_AUTHOR("Alessandro Zummo "); +MODULE_DESCRIPTION("NAS100D Power/Reset driver"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c new file mode 100644 index 000000000000..bde9648e7afc --- /dev/null +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -0,0 +1,133 @@ +/* + * arch/arm/mach-ixp4xx/nas100d-setup.c + * + * NAS 100d board-setup + * + * based ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Author: Alessandro Zummo + * Author: Rod Whitby + * Maintainers: http://www.nslu2-linux.org/ + * + */ + +#include +#include +#include + +#include +#include +#include + +static struct flash_platform_data nas100d_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource nas100d_flash_resource = { + .start = NAS100D_FLASH_BASE, + .end = NAS100D_FLASH_BASE + NAS100D_FLASH_SIZE, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device nas100d_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev.platform_data = &nas100d_flash_data, + .num_resources = 1, + .resource = &nas100d_flash_resource, +}; + +static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = { + .sda_pin = NAS100D_SDA_PIN, + .scl_pin = NAS100D_SCL_PIN, +}; + +static struct platform_device nas100d_i2c_controller = { + .name = "IXP4XX-I2C", + .id = 0, + .dev.platform_data = &nas100d_i2c_gpio_pins, + .num_resources = 0, +}; + +static struct resource nas100d_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port nas100d_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { } +}; + +static struct platform_device nas100d_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = nas100d_uart_data, + .num_resources = 2, + .resource = nas100d_uart_resources, +}; + +static struct platform_device *nas100d_devices[] __initdata = { + &nas100d_i2c_controller, + &nas100d_flash, + &nas100d_uart, +}; + +static void nas100d_power_off(void) +{ + /* This causes the box to drop the power and go dead. */ + + /* enable the pwr cntl gpio */ + gpio_line_config(NAS100D_PO_GPIO, IXP4XX_GPIO_OUT); + + /* do the deed */ + gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH); +} + +static void __init nas100d_init(void) +{ + ixp4xx_sys_init(); + + pm_power_off = nas100d_power_off; + + platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices)); +} + +MACHINE_START(NAS100D, "Iomega NAS 100d") + /* Maintainer: www.nslu2-linux.org */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .init_machine = nas100d_init, +MACHINE_END diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h index cfb413c845f7..6acb69c95ef9 100644 --- a/include/asm-arm/arch-ixp4xx/hardware.h +++ b/include/asm-arm/arch-ixp4xx/hardware.h @@ -45,5 +45,6 @@ extern unsigned int processor_id; #include "coyote.h" #include "prpmc1100.h" #include "nslu2.h" +#include "nas100d.h" #endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h index 2cf4930372bc..f24b763ca18e 100644 --- a/include/asm-arm/arch-ixp4xx/irqs.h +++ b/include/asm-arm/arch-ixp4xx/irqs.h @@ -100,4 +100,13 @@ #define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10 #define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9 +/* + * NAS100D board IRQs + */ +#define IRQ_NAS100D_PCI_INTA IRQ_IXP4XX_GPIO11 +#define IRQ_NAS100D_PCI_INTB IRQ_IXP4XX_GPIO10 +#define IRQ_NAS100D_PCI_INTC IRQ_IXP4XX_GPIO9 +#define IRQ_NAS100D_PCI_INTD IRQ_IXP4XX_GPIO8 +#define IRQ_NAS100D_PCI_INTE IRQ_IXP4XX_GPIO7 + #endif diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/include/asm-arm/arch-ixp4xx/nas100d.h new file mode 100644 index 000000000000..ce7a86a98fc2 --- /dev/null +++ b/include/asm-arm/arch-ixp4xx/nas100d.h @@ -0,0 +1,75 @@ +/* + * include/asm-arm/arch-ixp4xx/nas100d.h + * + * NAS100D platform specific definitions + * + * Copyright (c) 2005 Tower Technologies + * + * Author: Alessandro Zummo + * + * based on ixdp425.h: + * Copyright 2004 (c) MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_HARDWARE_H__ +#error "Do not include this directly, instead #include " +#endif + +#define NAS100D_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS +#define NAS100D_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE + +#define NAS100D_SDA_PIN 6 +#define NAS100D_SCL_PIN 5 + +/* + * NAS100D PCI IRQs + */ +#define NAS100D_PCI_MAX_DEV 3 +#define NAS100D_PCI_IRQ_LINES 3 + + +/* PCI controller GPIO to IRQ pin mappings */ +#define NAS100D_PCI_INTA_PIN 11 +#define NAS100D_PCI_INTB_PIN 10 +#define NAS100D_PCI_INTC_PIN 9 +#define NAS100D_PCI_INTD_PIN 8 +#define NAS100D_PCI_INTE_PIN 7 + +/* GPIO */ + +#define NAS100D_GPIO0 0 +#define NAS100D_GPIO1 1 +#define NAS100D_GPIO2 2 +#define NAS100D_GPIO3 3 +#define NAS100D_GPIO4 4 +#define NAS100D_GPIO5 5 +#define NAS100D_GPIO6 6 +#define NAS100D_GPIO7 7 +#define NAS100D_GPIO8 8 +#define NAS100D_GPIO9 9 +#define NAS100D_GPIO10 10 +#define NAS100D_GPIO11 11 +#define NAS100D_GPIO12 12 +#define NAS100D_GPIO13 13 +#define NAS100D_GPIO14 14 +#define NAS100D_GPIO15 15 + + +/* Buttons */ + +#define NAS100D_PB_GPIO NAS100D_GPIO14 +#define NAS100D_RB_GPIO NAS100D_GPIO4 +#define NAS100D_PO_GPIO NAS100D_GPIO12 /* power off */ + +#define NAS100D_PB_IRQ IRQ_IXP4XX_GPIO14 +#define NAS100D_RB_IRQ IRQ_IXP4XX_GPIO4 + +/* +#define NAS100D_PB_BM (1L << NAS100D_PB_GPIO) +#define NAS100D_PO_BM (1L << NAS100D_PO_GPIO) +#define NAS100D_RB_BM (1L << NAS100D_RB_GPIO) +*/ From 8d27e6992bc6a7ca7eaa1d29fb1a8d6cb6022c45 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Wed, 4 Jan 2006 17:17:12 +0000 Subject: [PATCH 16/36] [ARM] 3220/1: Remove gpio_isr_line_clear() from NAS 100d Patch from Deepak Saxena This patch removes referneces to gpio_isr_line_clear() from the NAS 100d platform implementation. Depends on 3192/1 and 3215/1 Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-ixp4xx/nas100d-pci.c | 6 ------ arch/arm/mach-ixp4xx/nas100d-power.c | 2 -- 2 files changed, 8 deletions(-) diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c index 9bd029462359..26b7c001ff64 100644 --- a/arch/arm/mach-ixp4xx/nas100d-pci.c +++ b/arch/arm/mach-ixp4xx/nas100d-pci.c @@ -30,12 +30,6 @@ void __init nas100d_pci_preinit(void) set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW); set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW); - gpio_line_isr_clear(NAS100D_PCI_INTA_PIN); - gpio_line_isr_clear(NAS100D_PCI_INTB_PIN); - gpio_line_isr_clear(NAS100D_PCI_INTC_PIN); - gpio_line_isr_clear(NAS100D_PCI_INTD_PIN); - gpio_line_isr_clear(NAS100D_PCI_INTE_PIN); - ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/nas100d-power.c b/arch/arm/mach-ixp4xx/nas100d-power.c index c74a19004390..2bec69bfa715 100644 --- a/arch/arm/mach-ixp4xx/nas100d-power.c +++ b/arch/arm/mach-ixp4xx/nas100d-power.c @@ -42,8 +42,6 @@ static int __init nas100d_power_init(void) set_irq_type(NAS100D_RB_IRQ, IRQT_LOW); - gpio_line_isr_clear(NAS100D_RB_GPIO); - if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler, SA_INTERRUPT, "NAS100D reset button", NULL) < 0) { From 313cbb5519405966e3e65fca86c0305ab24f2a3b Mon Sep 17 00:00:00 2001 From: Rod Whitby Date: Wed, 4 Jan 2006 17:17:13 +0000 Subject: [PATCH 17/36] [ARM] 3218/1: PAGE_SHIFT undeclared in arch-ixp4xx/memory.h (adjust_zones moved out of line) Patch from Rod Whitby PAGE_SHIFT is undeclared in include/asm-arm/arch-ixp4xx/memory.h, identified by the following kernel compilation error: CC [M] sound/core/memory.o In file included from include/asm/memory.h:27, from include/asm/io.h:28, from sound/core/memory.c:24: include/asm/arch/memory.h: In function `__arch_adjust_zones': include/asm/arch/memory.h:28: error: `PAGE_SHIFT' undeclared (first use in this function) This patch replaces my previous attempt at fixing this problem (Patch 3214/1) and is based on the following feedback: Russell King wrote: > The error you see came up on SA1100. The best solution was to move > the __arch_adjust_zones() function out of line. I suggest ixp4xx > does the same. I have moved the function out of line into arch/arm/mach-ixp4xx/common-pci.c as suggested. Signed-off-by: Rod Whitby Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-ixp4xx/common-pci.c | 23 +++++++++++++++++++++++ include/asm-arm/arch-ixp4xx/memory.h | 25 ++----------------------- 2 files changed, 25 insertions(+), 23 deletions(-) diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 9795da270e3a..6e3462ed5306 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -341,6 +341,29 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M); } +/* + * Only first 64MB of memory can be accessed via PCI. + * We use GFP_DMA to allocate safe buffers to do map/unmap. + * This is really ugly and we need a better way of specifying + * DMA-capable regions of memory. + */ +void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size, + unsigned long *zhole_size) +{ + unsigned int sz = SZ_64M >> PAGE_SHIFT; + + /* + * Only adjust if > 64M on current system + */ + if (node || (zone_size[0] <= sz)) + return; + + zone_size[1] = zone_size[0] - sz; + zone_size[0] = sz; + zhole_size[1] = zhole_size[0]; + zhole_size[0] = 0; +} + void __init ixp4xx_pci_preinit(void) { unsigned long processor_id; diff --git a/include/asm-arm/arch-ixp4xx/memory.h b/include/asm-arm/arch-ixp4xx/memory.h index e024d0a1a669..ee211d28a3ef 100644 --- a/include/asm-arm/arch-ixp4xx/memory.h +++ b/include/asm-arm/arch-ixp4xx/memory.h @@ -16,31 +16,10 @@ #ifndef __ASSEMBLY__ -/* - * Only first 64MB of memory can be accessed via PCI. - * We use GFP_DMA to allocate safe buffers to do map/unmap. - * This is really ugly and we need a better way of specifying - * DMA-capable regions of memory. - */ -static inline void __arch_adjust_zones(int node, unsigned long *zone_size, - unsigned long *zhole_size) -{ - unsigned int sz = SZ_64M >> PAGE_SHIFT; - - /* - * Only adjust if > 64M on current system - */ - if (node || (zone_size[0] <= sz)) - return; - - zone_size[1] = zone_size[0] - sz; - zone_size[0] = sz; - zhole_size[1] = zhole_size[0]; - zhole_size[0] = 0; -} +void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes); #define arch_adjust_zones(node, size, holes) \ - __arch_adjust_zones(node, size, holes) + ixp4xx_adjust_zones(node, size, holes) #define ISA_DMA_THRESHOLD (SZ_64M - 1) From b1ad3a57d39001af413414c34feb5cd41d0f7917 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Wed, 4 Jan 2006 17:17:14 +0000 Subject: [PATCH 18/36] [ARM] 3221/1: Update IXP4xx defconfig Patch from Deepak Saxena Add NAS 100d to machine build list and update to new 2.6.15 options. Signed-off-by: Deepak Saxena --- Signed-off-by: Russell King --- arch/arm/configs/ixp4xx_defconfig | 84 +++++++++++++++++++++++++------ 1 file changed, 69 insertions(+), 15 deletions(-) diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index f74c926beb42..613afab62720 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1-git5 -# Tue Sep 20 17:26:28 2005 +# Linux kernel version: 2.6.15 +# Tue Jan 3 03:20:40 2006 # CONFIG_ARM=y CONFIG_MMU=y @@ -33,6 +33,7 @@ CONFIG_SYSCTL=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -42,7 +43,6 @@ CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 @@ -61,6 +61,23 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # System Type # @@ -83,6 +100,7 @@ CONFIG_ARCH_IXP4XX=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -102,6 +120,7 @@ CONFIG_MACH_IXDPG425=y CONFIG_MACH_IXDP465=y CONFIG_ARCH_IXCDP1100=y CONFIG_ARCH_PRPMC1100=y +CONFIG_MACH_NAS100D=y CONFIG_ARCH_IXDP4XX=y CONFIG_CPU_IXP46X=y # CONFIG_MACH_GTWX5715 is not set @@ -155,6 +174,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -173,6 +193,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs" # At least one emulation must be selected # CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set # CONFIG_FPE_FASTFPE is not set # @@ -187,6 +208,8 @@ CONFIG_BINFMT_ELF=y # Power management options # CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set CONFIG_APM=y # @@ -271,6 +294,10 @@ CONFIG_IP_VS_SH=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -286,6 +313,7 @@ CONFIG_IP_NF_IRC=m # CONFIG_IP_NF_NETBIOS_NS is not set # CONFIG_IP_NF_TFTP is not set # CONFIG_IP_NF_AMANDA is not set +# CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m @@ -319,6 +347,7 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -380,10 +409,18 @@ CONFIG_ECONET=m CONFIG_ECONET_AUNUDP=y CONFIG_ECONET_NATIVE=y CONFIG_WAN_ROUTER=m + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m # CONFIG_NET_SCH_HFSC is not set @@ -397,8 +434,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m # CONFIG_NET_SCH_NETEM is not set CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y # CONFIG_NET_CLS_BASIC is not set CONFIG_NET_CLS_TCINDEX=m @@ -407,13 +446,14 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -436,6 +476,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -458,6 +503,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -492,7 +538,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set CONFIG_MTD_IXP4XX=y -# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set # CONFIG_MTD_PLATRAM is not set @@ -522,6 +567,11 @@ CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -548,14 +598,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -668,6 +710,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set @@ -739,6 +782,7 @@ CONFIG_NET_RADIO=y # # Wireless 802.11b ISA/PCI cards support # +# CONFIG_AIRO is not set CONFIG_HERMES=y # CONFIG_PLX_HERMES is not set # CONFIG_TMD_HERMES is not set @@ -782,6 +826,7 @@ CONFIG_WAN_ROUTER_DRIVERS=y # # ATM drivers # +# CONFIG_ATM_DUMMY is not set CONFIG_ATM_TCP=m # CONFIG_ATM_LANAI is not set # CONFIG_ATM_ENI is not set @@ -902,6 +947,7 @@ CONFIG_IXP4XX_WATCHDOG=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -954,6 +1000,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -1035,6 +1082,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -1110,6 +1161,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -1190,7 +1242,9 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_USER is not set # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y From b721243a6700b2ecc11f7b920d3d5d6718c5d148 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 4 Jan 2006 17:17:15 +0000 Subject: [PATCH 19/36] [ARM] 3223/1: remove ixdp2x01 cs89x0 hack Patch from Lennert Buytenhek Remove the ixdp2x01 cs89x0 hack from ixp2000's io implementation. Since the cs89x0 driver has been made properly aware of the odd way the cs89x0 is hooked up on the ixdp2x01, we don't need this hack anymore. Signed-off-by: Lennert Buytenhek Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- include/asm-arm/arch-ixp2000/io.h | 98 ------------------------------- 1 file changed, 98 deletions(-) diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h index 7fbcdf9931ee..c0ff2c6c66e7 100644 --- a/include/asm-arm/arch-ixp2000/io.h +++ b/include/asm-arm/arch-ixp2000/io.h @@ -131,102 +131,4 @@ #endif -#ifdef CONFIG_ARCH_IXDP2X01 -/* - * This is an ugly hack but the CS8900 on the 2x01's does not sit in any sort - * of "I/O space" and is just direct mapped into a 32-bit-only addressable - * bus. The address space for this bus is such that we can't really easily - * make it contiguous to the PCI I/O address range, and it also does not - * need swapping like PCI addresses do (IXDP2x01 is a BE platform). - * B/C of this we can't use the standard in/out functions and need to - * runtime check if the incoming address is a PCI address or for - * the CS89x0. - */ -#undef inw -#undef outw -#undef insw -#undef outsw - -#include - -static inline void insw(u32 ptr, void *buf, int length) -{ - register volatile u32 *port = (volatile u32 *)ptr; - - /* - * Is this cycle meant for the CS8900? - */ - if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && - (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) && - ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) { - u8 *buf8 = (u8*)buf; - register u32 tmp32; - - do { - tmp32 = *port; - *buf8++ = (u8)tmp32; - *buf8++ = (u8)(tmp32 >> 8); - } while(--length); - - return; - } - - __raw_readsw(alignw(___io(ptr)),buf,length); -} - -static inline void outsw(u32 ptr, void *buf, int length) -{ - register volatile u32 *port = (volatile u32 *)ptr; - - /* - * Is this cycle meant for the CS8900? - */ - if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && - (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) && - ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) { - register u32 tmp32; - u8 *buf8 = (u8*)buf; - do { - tmp32 = *buf8++; - tmp32 |= (*buf8++) << 8; - *port = tmp32; - } while(--length); - return; - } - - __raw_writesw(alignw(___io(ptr)),buf,length); -} - - -static inline u16 inw(u32 ptr) -{ - register volatile u32 *port = (volatile u32 *)ptr; - - /* - * Is this cycle meant for the CS8900? - */ - if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && - (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) && - ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) { - return (u16)(*port); - } - - return __raw_readw(alignw(___io(ptr))); -} - -static inline void outw(u16 value, u32 ptr) -{ - register volatile u32 *port = (volatile u32 *)ptr; - - if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && - (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) && - ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) { - *port = value; - return; - } - - __raw_writew((value),alignw(___io(ptr))); -} -#endif /* IXDP2x01 */ - #endif From 7a94283a7e8cd8a4ea29bf2cfedba511c706b0b4 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 4 Jan 2006 17:17:16 +0000 Subject: [PATCH 20/36] [ARM] 3224/1: add masked thread interrupt status registers for ixp2000 Patch from Lennert Buytenhek In its interrupt handler, the (NAPI) ixp2000 netdev driver needs to use the masked thread interrupt status register (instead of the raw one) to prevent scheduling polling when polling is already running when a TXdone interrupt comes in. The definitions for the masked status registers were not in yet, so this patch adds them. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-ixp2000/ixp2000-regs.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h index fc5ac6aec4f2..8cf70ff160af 100644 --- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h +++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h @@ -156,6 +156,14 @@ #define IXP2000_IRQ_THD_RAW_STATUS_B_1 IXP2000_INTCTL_REG(0x84) #define IXP2000_IRQ_THD_RAW_STATUS_B_2 IXP2000_INTCTL_REG(0x88) #define IXP2000_IRQ_THD_RAW_STATUS_B_3 IXP2000_INTCTL_REG(0x8c) +#define IXP2000_IRQ_THD_STATUS_A_0 IXP2000_INTCTL_REG(0xe0) +#define IXP2000_IRQ_THD_STATUS_A_1 IXP2000_INTCTL_REG(0xe4) +#define IXP2000_IRQ_THD_STATUS_A_2 IXP2000_INTCTL_REG(0xe8) +#define IXP2000_IRQ_THD_STATUS_A_3 IXP2000_INTCTL_REG(0xec) +#define IXP2000_IRQ_THD_STATUS_B_0 IXP2000_INTCTL_REG(0x100) +#define IXP2000_IRQ_THD_STATUS_B_1 IXP2000_INTCTL_REG(0x104) +#define IXP2000_IRQ_THD_STATUS_B_2 IXP2000_INTCTL_REG(0x108) +#define IXP2000_IRQ_THD_STATUS_B_3 IXP2000_INTCTL_REG(0x10c) #define IXP2000_IRQ_THD_ENABLE_SET_A_0 IXP2000_INTCTL_REG(0x160) #define IXP2000_IRQ_THD_ENABLE_SET_A_1 IXP2000_INTCTL_REG(0x164) #define IXP2000_IRQ_THD_ENABLE_SET_A_2 IXP2000_INTCTL_REG(0x168) From 4c70b926c91ba9c1ce3dc92d418f8e4670c8f16d Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 4 Jan 2006 17:17:17 +0000 Subject: [PATCH 21/36] [ARM] 3225/1: add symbolic names for enp2611 gpio interrupts Patch from Lennert Buytenhek Add symbolic names for the five ixp2400 GPIO lines on the enp2611 that are used as interrupts. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-ixp2000/enp2611.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/asm-arm/arch-ixp2000/enp2611.h b/include/asm-arm/arch-ixp2000/enp2611.h index 95128d9f5026..42f3c28dc5c4 100644 --- a/include/asm-arm/arch-ixp2000/enp2611.h +++ b/include/asm-arm/arch-ixp2000/enp2611.h @@ -36,5 +36,11 @@ #define ENP2611_GPIO_SCL 7 #define ENP2611_GPIO_SDA 6 +#define IRQ_ENP2611_THERMAL IRQ_IXP2000_GPIO4 +#define IRQ_ENP2611_OPTION_BOARD IRQ_IXP2000_GPIO3 +#define IRQ_ENP2611_CALEB IRQ_IXP2000_GPIO2 +#define IRQ_ENP2611_PM3386_1 IRQ_IXP2000_GPIO1 +#define IRQ_ENP2611_PM3386_0 IRQ_IXP2000_GPIO0 + #endif From 3125c68d70e3433c21234431a9df9e7336efa29f Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Thu, 5 Jan 2006 20:44:52 +0000 Subject: [PATCH 22/36] [ARM] 3227/1: Spitz: Add pxa27x OHCI platform specific code Patch from Richard Purdie Add platform code to enable the ohci device on the pxa27x based Sharp Zaurus Cxx00 devices. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/spitz.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 2df1b56615b1..5d34abc64af7 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include @@ -334,6 +335,35 @@ static struct pxamci_platform_data spitz_mci_platform_data = { }; +/* + * USB Host (OHCI) + */ +static int spitz_ohci_init(struct device *dev) +{ + /* Only Port 2 is connected */ + pxa_gpio_mode(SPITZ_GPIO_USB_CONNECT | GPIO_IN); + pxa_gpio_mode(SPITZ_GPIO_USB_HOST | GPIO_OUT); + pxa_gpio_mode(SPITZ_GPIO_USB_DEVICE | GPIO_IN); + + /* Setup USB Port 2 Output Control Register */ + UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; + + GPSR(SPITZ_GPIO_USB_HOST) = GPIO_bit(SPITZ_GPIO_USB_HOST); + + UHCHR = (UHCHR) & + ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); + + UHCRHDA |= UHCRHDA_NOCP; + + return 0; +} + +static struct pxaohci_platform_data spitz_ohci_platform_data = { + .port_mode = PMM_NPS_MODE, + .init = spitz_ohci_init, +}; + + /* * Irda */ @@ -411,6 +441,7 @@ static void __init common_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_mci_info(&spitz_mci_platform_data); + pxa_set_ohci_info(&spitz_ohci_platform_data); pxa_set_ficp_info(&spitz_ficp_platform_data); set_pxa_fb_parent(&spitzssp_device.dev); set_pxa_fb_info(&spitz_pxafb_info); From b7557de41a04346cb545d4dda7088760cb96e713 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Thu, 5 Jan 2006 20:44:55 +0000 Subject: [PATCH 23/36] [ARM] 3228/1: SharpSL: Move PM code to arch/arm/common Patch from Richard Purdie This patch moves a large chunk of the sharpsl_pm driver to arch/arm/common so that it can be reused on other devices such as the SL-5500 (collie). It also abstracts some functions from the core into the machine and platform specific parts of the driver to aid reuse. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/common/Kconfig | 3 + arch/arm/common/Makefile | 1 + arch/arm/common/sharpsl_pm.c | 839 ++++++++++++++++++++++++++ arch/arm/mach-pxa/Kconfig | 2 + arch/arm/mach-pxa/corgi_pm.c | 45 +- arch/arm/mach-pxa/sharpsl.h | 106 +--- arch/arm/mach-pxa/sharpsl_pm.c | 825 +------------------------ arch/arm/mach-pxa/spitz_pm.c | 47 +- drivers/video/backlight/corgi_bl.c | 1 + include/asm-arm/hardware/sharpsl_pm.h | 94 +++ 10 files changed, 1019 insertions(+), 944 deletions(-) create mode 100644 arch/arm/common/sharpsl_pm.c create mode 100644 include/asm-arm/hardware/sharpsl_pm.h diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 666ba393575b..d7509c7a3c5e 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -23,5 +23,8 @@ config SHARP_LOCOMO config SHARP_PARAM bool +config SHARPSL_PM + bool + config SHARP_SCOOP bool diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index a87886564b19..2685051b3013 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -13,4 +13,5 @@ obj-$(CONFIG_DMABOUNCE) += dmabounce.o obj-$(CONFIG_TIMER_ACORN) += time-acorn.o obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o +obj-$(CONFIG_SHARPSL_PM) += sharpsl_pm.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c new file mode 100644 index 000000000000..978d32e82d39 --- /dev/null +++ b/arch/arm/common/sharpsl_pm.c @@ -0,0 +1,839 @@ +/* + * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00 + * series of PDAs + * + * Copyright (c) 2004-2005 Richard Purdie + * + * Based on code written by Sharp for 2.4 kernels + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Constants + */ +#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */ +#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */ +#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */ +#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ +#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */ +#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */ +#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */ +#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */ +#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */ + +#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ +#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ +#define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */ +#define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */ +#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ +#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ + +/* + * Prototypes + */ +static int sharpsl_off_charge_battery(void); +static int sharpsl_check_battery_temp(void); +static int sharpsl_check_battery_voltage(void); +static int sharpsl_ac_check(void); +static int sharpsl_fatal_check(void); +static int sharpsl_average_value(int ad); +static void sharpsl_average_clear(void); +static void sharpsl_charge_toggle(void *private_); +static void sharpsl_battery_thread(void *private_); + + +/* + * Variables + */ +struct sharpsl_pm_status sharpsl_pm; +DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL); +DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL); + + +static int get_percentage(int voltage) +{ + int i = sharpsl_pm.machinfo->bat_levels - 1; + struct battery_thresh *thresh; + + if (sharpsl_pm.charge_mode == CHRG_ON) + thresh=sharpsl_pm.machinfo->bat_levels_acin; + else + thresh=sharpsl_pm.machinfo->bat_levels_noac; + + while (i > 0 && (voltage > thresh[i].voltage)) + i--; + + return thresh[i].percentage; +} + +static int get_apm_status(int voltage) +{ + int low_thresh, high_thresh; + + if (sharpsl_pm.charge_mode == CHRG_ON) { + high_thresh = sharpsl_pm.machinfo->status_high_acin; + low_thresh = sharpsl_pm.machinfo->status_low_acin; + } else { + high_thresh = sharpsl_pm.machinfo->status_high_noac; + low_thresh = sharpsl_pm.machinfo->status_low_noac; + } + + if (voltage >= high_thresh) + return APM_BATTERY_STATUS_HIGH; + if (voltage >= low_thresh) + return APM_BATTERY_STATUS_LOW; + return APM_BATTERY_STATUS_CRITICAL; +} + +void sharpsl_battery_kick(void) +{ + schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125)); +} +EXPORT_SYMBOL(sharpsl_battery_kick); + + +static void sharpsl_battery_thread(void *private_) +{ + int voltage, percent, apm_status, i = 0; + + if (!sharpsl_pm.machinfo) + return; + + sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE); + + /* Corgi cannot confirm when battery fully charged so periodically kick! */ + if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON) + && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL)) + schedule_work(&toggle_charger); + + while(1) { + voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); + + if (voltage > 0) break; + if (i++ > 5) { + voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage; + dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n"); + break; + } + } + + voltage = sharpsl_average_value(voltage); + apm_status = get_apm_status(voltage); + percent = get_percentage(voltage); + + /* At low battery voltages, the voltage has a tendency to start + creeping back up so we try to avoid this here */ + if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) { + sharpsl_pm.battstat.mainbat_voltage = voltage; + sharpsl_pm.battstat.mainbat_status = apm_status; + sharpsl_pm.battstat.mainbat_percent = percent; + } + + dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage, + sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies); + + /* If battery is low. limit backlight intensity to save power. */ + if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) + && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) || + (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { + if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) { + corgibl_limit_intensity(1); + sharpsl_pm.flags |= SHARPSL_BL_LIMIT; + } + } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) { + corgibl_limit_intensity(0); + sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT; + } + + /* Suspend if critical battery level */ + if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) + && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL) + && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) { + sharpsl_pm.flags |= SHARPSL_APM_QUEUED; + dev_err(sharpsl_pm.dev, "Fatal Off\n"); + apm_queue_event(APM_CRITICAL_SUSPEND); + } + + schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME); +} + +void sharpsl_pm_led(int val) +{ + if (val == SHARPSL_LED_ERROR) { + dev_err(sharpsl_pm.dev, "Charging Error!\n"); + } else if (val == SHARPSL_LED_ON) { + dev_dbg(sharpsl_pm.dev, "Charge LED On\n"); + + } else { + dev_dbg(sharpsl_pm.dev, "Charge LED Off\n"); + + } +} + +static void sharpsl_charge_on(void) +{ + dev_dbg(sharpsl_pm.dev, "Turning Charger On\n"); + + sharpsl_pm.full_count = 0; + sharpsl_pm.charge_mode = CHRG_ON; + schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250)); + schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500)); +} + +static void sharpsl_charge_off(void) +{ + dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n"); + + sharpsl_pm.machinfo->charge(0); + sharpsl_pm_led(SHARPSL_LED_OFF); + sharpsl_pm.charge_mode = CHRG_OFF; + + schedule_work(&sharpsl_bat); +} + +static void sharpsl_charge_error(void) +{ + sharpsl_pm_led(SHARPSL_LED_ERROR); + sharpsl_pm.machinfo->charge(0); + sharpsl_pm.charge_mode = CHRG_ERROR; +} + +static void sharpsl_charge_toggle(void *private_) +{ + dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies); + + if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { + sharpsl_charge_off(); + return; + } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) { + sharpsl_charge_error(); + return; + } + + sharpsl_pm_led(SHARPSL_LED_ON); + sharpsl_pm.machinfo->charge(0); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + sharpsl_pm.machinfo->charge(1); + + sharpsl_pm.charge_start_time = jiffies; +} + +static void sharpsl_ac_timer(unsigned long data) +{ + int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); + + dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin); + + sharpsl_average_clear(); + if (acin && (sharpsl_pm.charge_mode != CHRG_ON)) + sharpsl_charge_on(); + else if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_charge_off(); + + schedule_work(&sharpsl_bat); +} + + +irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp) +{ + /* Delay the event slightly to debounce */ + /* Must be a smaller delay than the chrg_full_isr below */ + mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); + + return IRQ_HANDLED; +} + +static void sharpsl_chrg_full_timer(unsigned long data) +{ + dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies); + + sharpsl_pm.full_count++; + + if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { + dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n"); + if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_charge_off(); + } else if (sharpsl_pm.full_count < 2) { + dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n"); + schedule_work(&toggle_charger); + } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) { + dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n"); + schedule_work(&toggle_charger); + } else { + sharpsl_charge_off(); + sharpsl_pm.charge_mode = CHRG_DONE; + dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n"); + } +} + +/* Charging Finished Interrupt (Not present on Corgi) */ +/* Can trigger at the same time as an AC staus change so + delay until after that has been processed */ +irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp) +{ + if (sharpsl_pm.flags & SHARPSL_SUSPENDED) + return IRQ_HANDLED; + + /* delay until after any ac interrupt */ + mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500)); + + return IRQ_HANDLED; +} + +irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp) +{ + int is_fatal = 0; + + if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) { + dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n"); + is_fatal = 1; + } + + if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) { + dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n"); + is_fatal = 1; + } + + if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) { + sharpsl_pm.flags |= SHARPSL_APM_QUEUED; + apm_queue_event(APM_CRITICAL_SUSPEND); + } + + return IRQ_HANDLED; +} + +/* + * Maintain an average of the last 10 readings + */ +#define SHARPSL_CNV_VALUE_NUM 10 +static int sharpsl_ad_index; + +static void sharpsl_average_clear(void) +{ + sharpsl_ad_index = 0; +} + +static int sharpsl_average_value(int ad) +{ + int i, ad_val = 0; + static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1]; + + if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) { + sharpsl_ad_index = 0; + return ad; + } + + sharpsl_ad[sharpsl_ad_index] = ad; + sharpsl_ad_index++; + if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) { + for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++) + sharpsl_ad[i] = sharpsl_ad[i+1]; + sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1; + } + for (i=0; i < sharpsl_ad_index; i++) + ad_val += sharpsl_ad[i]; + + return (ad_val / sharpsl_ad_index); +} + +/* + * Take an array of 5 integers, remove the maximum and minimum values + * and return the average. + */ +static int get_select_val(int *val) +{ + int i, j, k, temp, sum = 0; + + /* Find MAX val */ + temp = val[0]; + j=0; + for (i=1; i<5; i++) { + if (temp < val[i]) { + temp = val[i]; + j = i; + } + } + + /* Find MIN val */ + temp = val[4]; + k=4; + for (i=3; i>=0; i--) { + if (temp > val[i]) { + temp = val[i]; + k = i; + } + } + + for (i=0; i<5; i++) + if (i != j && i != k ) + sum += val[i]; + + dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]); + + return (sum/3); +} + +static int sharpsl_check_battery_temp(void) +{ + int val, i, buff[5]; + + /* Check battery temperature */ + for (i=0; i<5; i++) { + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); + sharpsl_pm.machinfo->measure_temp(1); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); + buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP); + sharpsl_pm.machinfo->measure_temp(0); + } + + val = get_select_val(buff); + + dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val); + if (val > SHARPSL_CHARGE_ON_TEMP) + return -1; + + return 0; +} + +static int sharpsl_check_battery_voltage(void) +{ + int val, i, buff[5]; + + /* disable charge, enable discharge */ + sharpsl_pm.machinfo->charge(0); + sharpsl_pm.machinfo->discharge(1); + mdelay(SHARPSL_WAIT_DISCHARGE_ON); + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(1); + + /* Check battery voltage */ + for (i=0; i<5; i++) { + buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(0); + + sharpsl_pm.machinfo->discharge(0); + + val = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val); + + if (val < SHARPSL_CHARGE_ON_VOLT) + return -1; + + return 0; +} + +static int sharpsl_ac_check(void) +{ + int temp, i, buff[5]; + + for (i=0; i<5; i++) { + buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN); + } + + temp = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp); + + if ((temp > SHARPSL_CHARGE_ON_ACIN_HIGH) || (temp < SHARPSL_CHARGE_ON_ACIN_LOW)) { + dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); + return -1; + } + + return 0; +} + +#ifdef CONFIG_PM +static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state) +{ + sharpsl_pm.flags |= SHARPSL_SUSPENDED; + flush_scheduled_work(); + + if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; + else + sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; + + return 0; +} + +static int sharpsl_pm_resume(struct platform_device *pdev) +{ + /* Clear the reset source indicators as they break the bootloader upon reboot */ + RCSR = 0x0f; + sharpsl_average_clear(); + sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED; + sharpsl_pm.flags &= ~SHARPSL_SUSPENDED; + + return 0; +} + +static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) +{ + dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR); + + dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); + /* not charging and AC-IN! */ + + if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) { + dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n"); + sharpsl_pm.charge_mode = CHRG_OFF; + sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; + sharpsl_off_charge_battery(); + } + + sharpsl_pm.machinfo->presuspend(); + + PEDR = 0xffffffff; /* clear it */ + + sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE; + if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) { + RTSR &= RTSR_ALE; + RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND; + dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR); + sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE; + } else if (alarm_enable) { + RTSR &= RTSR_ALE; + RTAR = alarm_time; + dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR); + } else { + dev_dbg(sharpsl_pm.dev, "No alarms set.\n"); + } + + pxa_pm_enter(state); + + sharpsl_pm.machinfo->postsuspend(); + + dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR); +} + +static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) +{ + if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) ) + { + if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) { + dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + if(sharpsl_off_charge_battery()) { + dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n"); + } + + if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) ) + { + dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + + return 0; +} + +static int corgi_pxa_pm_enter(suspend_state_t state) +{ + unsigned long alarm_time = RTAR; + unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0); + + dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n"); + + corgi_goto_sleep(alarm_time, alarm_status, state); + + while (corgi_enter_suspend(alarm_time,alarm_status,state)) + {} + + dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n"); + + return 0; +} +#endif + + +/* + * Check for fatal battery errors + * Fatal returns -1 + */ +static int sharpsl_fatal_check(void) +{ + int buff[5], temp, i, acin; + + dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n"); + + /* Check AC-Adapter */ + acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); + + if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { + sharpsl_pm.machinfo->charge(0); + udelay(100); + sharpsl_pm.machinfo->discharge(1); /* enable discharge */ + mdelay(SHARPSL_WAIT_DISCHARGE_ON); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(1); + + /* Check battery : check inserting battery ? */ + for (i=0; i<5; i++) { + buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(0); + + if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { + udelay(100); + sharpsl_pm.machinfo->charge(1); + sharpsl_pm.machinfo->discharge(0); + } + + temp = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT)); + + if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) || + (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT))) + return -1; + return 0; +} + +static int sharpsl_off_charge_error(void) +{ + dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n"); + sharpsl_pm.machinfo->charge(0); + sharpsl_pm_led(SHARPSL_LED_ERROR); + sharpsl_pm.charge_mode = CHRG_ERROR; + return 1; +} + +/* + * Charging Control while suspended + * Return 1 - go straight to sleep + * Return 0 - sleep or wakeup depending on other factors + */ +static int sharpsl_off_charge_battery(void) +{ + int time; + + dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode); + + if (sharpsl_pm.charge_mode == CHRG_OFF) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n"); + + /* AC Check */ + if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0)) + return sharpsl_off_charge_error(); + + /* Start Charging */ + sharpsl_pm_led(SHARPSL_LED_ON); + sharpsl_pm.machinfo->charge(0); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + sharpsl_pm.machinfo->charge(1); + + sharpsl_pm.charge_mode = CHRG_ON; + sharpsl_pm.full_count = 0; + + return 1; + } else if (sharpsl_pm.charge_mode != CHRG_ON) { + return 1; + } + + if (sharpsl_pm.full_count == 0) { + int time; + + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n"); + + if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0)) + return sharpsl_off_charge_error(); + + sharpsl_pm.machinfo->charge(0); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + sharpsl_pm.machinfo->charge(1); + sharpsl_pm.charge_mode = CHRG_ON; + + mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); + + time = RCNR; + while(1) { + /* Check if any wakeup event had occured */ + if (sharpsl_pm.machinfo->charger_wakeup() != 0) + return 0; + /* Check for timeout */ + if ((RCNR - time) > SHARPSL_WAIT_CO_TIME) + return 1; + if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n"); + sharpsl_pm.full_count++; + sharpsl_pm.machinfo->charge(0); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + sharpsl_pm.machinfo->charge(1); + return 1; + } + } + } + + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n"); + + mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); + + time = RCNR; + while(1) { + /* Check if any wakeup event had occured */ + if (sharpsl_pm.machinfo->charger_wakeup() != 0) + return 0; + /* Check for timeout */ + if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) { + if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n"); + sharpsl_pm.full_count = 0; + } + sharpsl_pm.full_count++; + return 1; + } + if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n"); + sharpsl_pm_led(SHARPSL_LED_OFF); + sharpsl_pm.machinfo->charge(0); + sharpsl_pm.charge_mode = CHRG_DONE; + return 1; + } + } +} + + +static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent); +} + +static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage); +} + +static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL); +static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL); + +extern void (*apm_get_power_status)(struct apm_power_info *); + +static void sharpsl_apm_get_power_status(struct apm_power_info *info) +{ + info->ac_line_status = sharpsl_pm.battstat.ac_status; + + if (sharpsl_pm.charge_mode == CHRG_ON) + info->battery_status = APM_BATTERY_STATUS_CHARGING; + else + info->battery_status = sharpsl_pm.battstat.mainbat_status; + + info->battery_flag = (1 << info->battery_status); + info->battery_life = sharpsl_pm.battstat.mainbat_percent; +} + +static struct pm_ops sharpsl_pm_ops = { + .pm_disk_mode = PM_DISK_FIRMWARE, + .prepare = pxa_pm_prepare, + .enter = corgi_pxa_pm_enter, + .finish = pxa_pm_finish, +}; + +static int __init sharpsl_pm_probe(struct platform_device *pdev) +{ + if (!pdev->dev.platform_data) + return -EINVAL; + + sharpsl_pm.dev = &pdev->dev; + sharpsl_pm.machinfo = pdev->dev.platform_data; + sharpsl_pm.charge_mode = CHRG_OFF; + sharpsl_pm.flags = 0; + + init_timer(&sharpsl_pm.ac_timer); + sharpsl_pm.ac_timer.function = sharpsl_ac_timer; + + init_timer(&sharpsl_pm.chrg_full_timer); + sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer; + + sharpsl_pm.machinfo->init(); + + device_create_file(&pdev->dev, &dev_attr_battery_percentage); + device_create_file(&pdev->dev, &dev_attr_battery_voltage); + + apm_get_power_status = sharpsl_apm_get_power_status; + + pm_set_ops(&sharpsl_pm_ops); + + mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); + + return 0; +} + +static int sharpsl_pm_remove(struct platform_device *pdev) +{ + pm_set_ops(NULL); + + device_remove_file(&pdev->dev, &dev_attr_battery_percentage); + device_remove_file(&pdev->dev, &dev_attr_battery_voltage); + + sharpsl_pm.machinfo->exit(); + + del_timer_sync(&sharpsl_pm.chrg_full_timer); + del_timer_sync(&sharpsl_pm.ac_timer); + + return 0; +} + +static struct platform_driver sharpsl_pm_driver = { + .probe = sharpsl_pm_probe, + .remove = sharpsl_pm_remove, + .suspend = sharpsl_pm_suspend, + .resume = sharpsl_pm_resume, + .driver = { + .name = "sharpsl-pm", + }, +}; + +static int __devinit sharpsl_pm_init(void) +{ + return platform_driver_register(&sharpsl_pm_driver); +} + +static void sharpsl_pm_exit(void) +{ + platform_driver_unregister(&sharpsl_pm_driver); +} + +late_initcall(sharpsl_pm_init); +module_exit(sharpsl_pm_exit); diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 2a58499c0968..c1d77f5b3823 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -112,12 +112,14 @@ config IWMMXT config PXA_SHARP_C7xx bool select PXA_SSP + select SHARPSL_PM help Enable support for all Sharp C7xx models config PXA_SHARP_Cxx00 bool select PXA_SSP + select SHARPSL_PM help Enable common support for Sharp Cxx00 models diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 599be14754f9..de8b2403c929 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -33,19 +34,7 @@ static void corgi_charger_init(void) pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT); pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT); pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN); -} - -static void corgi_charge_led(int val) -{ - if (val == SHARPSL_LED_ERROR) { - dev_dbg(sharpsl_pm.dev, "Charge LED Error\n"); - } else if (val == SHARPSL_LED_ON) { - dev_dbg(sharpsl_pm.dev, "Charge LED On\n"); - GPSR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE); - } else { - dev_dbg(sharpsl_pm.dev, "Charge LED Off\n"); - GPCR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE); - } + sharpsl_pm_pxa_init(); } static void corgi_measure_temp(int on) @@ -138,15 +127,15 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm) dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR); if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) { - if (STATUS_AC_IN()) { + if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { /* charge on */ dev_dbg(sharpsl_pm.dev, "ac insert\n"); sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; } else { /* charge off */ dev_dbg(sharpsl_pm.dev, "ac remove\n"); - CHARGE_LED_OFF(); - CHARGE_OFF(); + sharpsl_pm_led(SHARPSL_LED_OFF); + sharpsl_pm.machinfo->charge(0); sharpsl_pm.charge_mode = CHRG_OFF; } } @@ -172,23 +161,39 @@ static unsigned long corgi_charger_wakeup(void) return ~GPLR0 & ( GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) ); } -static int corgi_acin_status(void) +unsigned long corgipm_read_devdata(int type) { - return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0); + switch(type) { + case SHARPSL_STATUS_ACIN: + return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0); + case SHARPSL_STATUS_LOCK: + return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock); + case SHARPSL_STATUS_CHRGFULL: + return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull); + case SHARPSL_STATUS_FATAL: + return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal); + case SHARPSL_ACIN_VOLT: + return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT); + case SHARPSL_BATT_TEMP: + return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP); + case SHARPSL_BATT_VOLT: + default: + return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT); + } } static struct sharpsl_charger_machinfo corgi_pm_machinfo = { .init = corgi_charger_init, + .exit = sharpsl_pm_pxa_remove, .gpio_batlock = CORGI_GPIO_BAT_COVER, .gpio_acin = CORGI_GPIO_AC_IN, .gpio_batfull = CORGI_GPIO_CHRG_FULL, - .status_acin = corgi_acin_status, .discharge = corgi_discharge, .charge = corgi_charge, - .chargeled = corgi_charge_led, .measure_temp = corgi_measure_temp, .presuspend = corgi_presuspend, .postsuspend = corgi_postsuspend, + .read_devdata = corgipm_read_devdata, .charger_wakeup = corgi_charger_wakeup, .should_wakeup = corgi_should_wakeup, .bat_levels = 40, diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h index b0c40a1d6671..92b793050509 100644 --- a/arch/arm/mach-pxa/sharpsl.h +++ b/arch/arm/mach-pxa/sharpsl.h @@ -1,7 +1,16 @@ +/* + * Copyright (c) 2004-2005 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + + /* * SharpSL SSP Driver */ - struct corgissp_machinfo { int port; int cs_lcdcon; @@ -14,18 +23,18 @@ struct corgissp_machinfo { void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo); + /* * SharpSL Backlight */ - void corgi_bl_set_intensity(int intensity); void spitz_bl_set_intensity(int intensity); void akita_bl_set_intensity(int intensity); + /* * SharpSL Touchscreen Driver */ - unsigned long corgi_get_hsync_len(void); unsigned long spitz_get_hsync_len(void); void corgi_put_hsync(void); @@ -33,89 +42,22 @@ void spitz_put_hsync(void); void corgi_wait_hsync(void); void spitz_wait_hsync(void); + /* * SharpSL Battery/PM Driver */ -struct sharpsl_charger_machinfo { - void (*init)(void); - int gpio_acin; - int gpio_batfull; - int gpio_batlock; - int gpio_fatal; - int (*status_acin)(void); - void (*discharge)(int); - void (*discharge1)(int); - void (*charge)(int); - void (*chargeled)(int); - void (*measure_temp)(int); - void (*presuspend)(void); - void (*postsuspend)(void); - unsigned long (*charger_wakeup)(void); - int (*should_wakeup)(unsigned int resume_on_alarm); - int bat_levels; - struct battery_thresh *bat_levels_noac; - struct battery_thresh *bat_levels_acin; - int status_high_acin; - int status_low_acin; - int status_high_noac; - int status_low_noac; -}; - -struct battery_thresh { - int voltage; - int percentage; -}; - -struct battery_stat { - int ac_status; /* APM AC Present/Not Present */ - int mainbat_status; /* APM Main Battery Status */ - int mainbat_percent; /* Main Battery Percentage Charge */ - int mainbat_voltage; /* Main Battery Voltage */ -}; - -struct sharpsl_pm_status { - struct device *dev; - struct timer_list ac_timer; - struct timer_list chrg_full_timer; - - int charge_mode; -#define CHRG_ERROR (-1) -#define CHRG_OFF (0) -#define CHRG_ON (1) -#define CHRG_DONE (2) - - unsigned int flags; -#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */ -#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */ -#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */ -#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */ -#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */ - - int full_count; - unsigned long charge_start_time; - struct sharpsl_charger_machinfo *machinfo; - struct battery_stat battstat; -}; - -extern struct sharpsl_pm_status sharpsl_pm; -extern struct battery_thresh spitz_battery_levels_acin[]; -extern struct battery_thresh spitz_battery_levels_noac[]; - #define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x)) -#define SHARPSL_LED_ERROR 2 -#define SHARPSL_LED_ON 1 -#define SHARPSL_LED_OFF 0 +/* MAX1111 Channel Definitions */ +#define MAX1111_BATT_VOLT 4u +#define MAX1111_BATT_TEMP 2u +#define MAX1111_ACIN_VOLT 6u + +extern struct battery_thresh spitz_battery_levels_acin[]; +extern struct battery_thresh spitz_battery_levels_noac[]; +void sharpsl_pm_pxa_init(void); +void sharpsl_pm_pxa_remove(void); +int sharpsl_pm_pxa_read_max1111(int channel); + -#define CHARGE_ON() sharpsl_pm.machinfo->charge(1) -#define CHARGE_OFF() sharpsl_pm.machinfo->charge(0) -#define CHARGE_LED_ON() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ON) -#define CHARGE_LED_OFF() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_OFF) -#define CHARGE_LED_ERR() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ERROR) -#define DISCHARGE_ON() sharpsl_pm.machinfo->discharge(1) -#define DISCHARGE_OFF() sharpsl_pm.machinfo->discharge(0) -#define STATUS_AC_IN() sharpsl_pm.machinfo->status_acin() -#define STATUS_BATT_LOCKED() READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock) -#define STATUS_CHRG_FULL() READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull) -#define STATUS_FATAL() READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal) diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index c10be00fb526..f6fefb181411 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -15,48 +15,21 @@ #undef DEBUG #include -#include #include #include -#include -#include #include #include #include -#include #include #include #include - #include #include #include +#include #include "sharpsl.h" -/* - * Constants - */ -#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */ -#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */ -#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */ -#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ -#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */ -#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */ -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */ -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */ -#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */ -#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */ -#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */ - -#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ -#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ -#define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */ -#define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */ -#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ -#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ - struct battery_thresh spitz_battery_levels_acin[] = { { 213, 100}, { 212, 98}, @@ -151,763 +124,17 @@ struct battery_thresh spitz_battery_levels_noac[] = { #define MAXCTRL_SEL_SH 4 #define MAXCTRL_STR 1u << 7 -/* MAX1111 Channel Definitions */ -#define BATT_AD 4u -#define BATT_THM 2u -#define JK_VAD 6u - - -/* - * Prototypes - */ -static int sharpsl_read_main_battery(void); -static int sharpsl_off_charge_battery(void); -static int sharpsl_check_battery_temp(void); -static int sharpsl_check_battery_voltage(void); -static int sharpsl_ac_check(void); -static int sharpsl_fatal_check(void); -static int sharpsl_average_value(int ad); -static void sharpsl_average_clear(void); -static void sharpsl_charge_toggle(void *private_); -static void sharpsl_battery_thread(void *private_); - - -/* - * Variables - */ -struct sharpsl_pm_status sharpsl_pm; -DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL); -DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL); - - -static int get_percentage(int voltage) -{ - int i = sharpsl_pm.machinfo->bat_levels - 1; - struct battery_thresh *thresh; - - if (sharpsl_pm.charge_mode == CHRG_ON) - thresh=sharpsl_pm.machinfo->bat_levels_acin; - else - thresh=sharpsl_pm.machinfo->bat_levels_noac; - - while (i > 0 && (voltage > thresh[i].voltage)) - i--; - - return thresh[i].percentage; -} - -static int get_apm_status(int voltage) -{ - int low_thresh, high_thresh; - - if (sharpsl_pm.charge_mode == CHRG_ON) { - high_thresh = sharpsl_pm.machinfo->status_high_acin; - low_thresh = sharpsl_pm.machinfo->status_low_acin; - } else { - high_thresh = sharpsl_pm.machinfo->status_high_noac; - low_thresh = sharpsl_pm.machinfo->status_low_noac; - } - - if (voltage >= high_thresh) - return APM_BATTERY_STATUS_HIGH; - if (voltage >= low_thresh) - return APM_BATTERY_STATUS_LOW; - return APM_BATTERY_STATUS_CRITICAL; -} - -void sharpsl_battery_kick(void) -{ - schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125)); -} -EXPORT_SYMBOL(sharpsl_battery_kick); - - -static void sharpsl_battery_thread(void *private_) -{ - int voltage, percent, apm_status, i = 0; - - if (!sharpsl_pm.machinfo) - return; - - sharpsl_pm.battstat.ac_status = (STATUS_AC_IN() ? APM_AC_ONLINE : APM_AC_OFFLINE); - - /* Corgi cannot confirm when battery fully charged so periodically kick! */ - if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON) - && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL)) - schedule_work(&toggle_charger); - - while(1) { - voltage = sharpsl_read_main_battery(); - if (voltage > 0) break; - if (i++ > 5) { - voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage; - dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n"); - break; - } - } - - voltage = sharpsl_average_value(voltage); - apm_status = get_apm_status(voltage); - percent = get_percentage(voltage); - - /* At low battery voltages, the voltage has a tendency to start - creeping back up so we try to avoid this here */ - if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) { - sharpsl_pm.battstat.mainbat_voltage = voltage; - sharpsl_pm.battstat.mainbat_status = apm_status; - sharpsl_pm.battstat.mainbat_percent = percent; - } - - dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage, - sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies); - - /* If battery is low. limit backlight intensity to save power. */ - if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) - && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) || - (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { - if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) { - corgibl_limit_intensity(1); - sharpsl_pm.flags |= SHARPSL_BL_LIMIT; - } - } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) { - corgibl_limit_intensity(0); - sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT; - } - - /* Suspend if critical battery level */ - if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) - && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL) - && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) { - sharpsl_pm.flags |= SHARPSL_APM_QUEUED; - dev_err(sharpsl_pm.dev, "Fatal Off\n"); - apm_queue_event(APM_CRITICAL_SUSPEND); - } - - schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME); -} - -static void sharpsl_charge_on(void) -{ - dev_dbg(sharpsl_pm.dev, "Turning Charger On\n"); - - sharpsl_pm.full_count = 0; - sharpsl_pm.charge_mode = CHRG_ON; - schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250)); - schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500)); -} - -static void sharpsl_charge_off(void) -{ - dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n"); - - CHARGE_OFF(); - CHARGE_LED_OFF(); - sharpsl_pm.charge_mode = CHRG_OFF; - - schedule_work(&sharpsl_bat); -} - -static void sharpsl_charge_error(void) -{ - CHARGE_LED_ERR(); - CHARGE_OFF(); - sharpsl_pm.charge_mode = CHRG_ERROR; -} - -static void sharpsl_charge_toggle(void *private_) -{ - dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies); - - if (STATUS_AC_IN() == 0) { - sharpsl_charge_off(); - return; - } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) { - sharpsl_charge_error(); - return; - } - - CHARGE_LED_ON(); - CHARGE_OFF(); - mdelay(SHARPSL_CHARGE_WAIT_TIME); - CHARGE_ON(); - - sharpsl_pm.charge_start_time = jiffies; -} - -static void sharpsl_ac_timer(unsigned long data) -{ - int acin = STATUS_AC_IN(); - - dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin); - - sharpsl_average_clear(); - if (acin && (sharpsl_pm.charge_mode != CHRG_ON)) - sharpsl_charge_on(); - else if (sharpsl_pm.charge_mode == CHRG_ON) - sharpsl_charge_off(); - - schedule_work(&sharpsl_bat); -} - - -static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp) -{ - /* Delay the event slightly to debounce */ - /* Must be a smaller delay than the chrg_full_isr below */ - mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); - - return IRQ_HANDLED; -} - -static void sharpsl_chrg_full_timer(unsigned long data) -{ - dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies); - - sharpsl_pm.full_count++; - - if (STATUS_AC_IN() == 0) { - dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n"); - if (sharpsl_pm.charge_mode == CHRG_ON) - sharpsl_charge_off(); - } else if (sharpsl_pm.full_count < 2) { - dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n"); - schedule_work(&toggle_charger); - } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) { - dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n"); - schedule_work(&toggle_charger); - } else { - sharpsl_charge_off(); - sharpsl_pm.charge_mode = CHRG_DONE; - dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n"); - } -} - -/* Charging Finished Interrupt (Not present on Corgi) */ -/* Can trigger at the same time as an AC staus change so - delay until after that has been processed */ -static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp) -{ - if (sharpsl_pm.flags & SHARPSL_SUSPENDED) - return IRQ_HANDLED; - - /* delay until after any ac interrupt */ - mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500)); - - return IRQ_HANDLED; -} - -static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp) -{ - int is_fatal = 0; - - if (STATUS_BATT_LOCKED() == 0) { - dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n"); - is_fatal = 1; - } - - if (sharpsl_pm.machinfo->gpio_fatal && (STATUS_FATAL() == 0)) { - dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n"); - is_fatal = 1; - } - - if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) { - sharpsl_pm.flags |= SHARPSL_APM_QUEUED; - apm_queue_event(APM_CRITICAL_SUSPEND); - } - - return IRQ_HANDLED; -} - -/* - * Maintain an average of the last 10 readings - */ -#define SHARPSL_CNV_VALUE_NUM 10 -static int sharpsl_ad_index; - -static void sharpsl_average_clear(void) -{ - sharpsl_ad_index = 0; -} - -static int sharpsl_average_value(int ad) -{ - int i, ad_val = 0; - static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1]; - - if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) { - sharpsl_ad_index = 0; - return ad; - } - - sharpsl_ad[sharpsl_ad_index] = ad; - sharpsl_ad_index++; - if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) { - for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++) - sharpsl_ad[i] = sharpsl_ad[i+1]; - sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1; - } - for (i=0; i < sharpsl_ad_index; i++) - ad_val += sharpsl_ad[i]; - - return (ad_val / sharpsl_ad_index); -} - - /* * Read MAX1111 ADC */ -static int read_max1111(int channel) +int sharpsl_pm_pxa_read_max1111(int channel) { return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1 | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR); } -static int sharpsl_read_main_battery(void) +void sharpsl_pm_pxa_init(void) { - return read_max1111(BATT_AD); -} - -static int sharpsl_read_temp(void) -{ - int temp; - - sharpsl_pm.machinfo->measure_temp(1); - - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); - temp = read_max1111(BATT_THM); - - sharpsl_pm.machinfo->measure_temp(0); - - return temp; -} - -static int sharpsl_read_acin(void) -{ - return read_max1111(JK_VAD); -} - -/* - * Take an array of 5 integers, remove the maximum and minimum values - * and return the average. - */ -static int get_select_val(int *val) -{ - int i, j, k, temp, sum = 0; - - /* Find MAX val */ - temp = val[0]; - j=0; - for (i=1; i<5; i++) { - if (temp < val[i]) { - temp = val[i]; - j = i; - } - } - - /* Find MIN val */ - temp = val[4]; - k=4; - for (i=3; i>=0; i--) { - if (temp > val[i]) { - temp = val[i]; - k = i; - } - } - - for (i=0; i<5; i++) - if (i != j && i != k ) - sum += val[i]; - - dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]); - - return (sum/3); -} - -static int sharpsl_check_battery_temp(void) -{ - int val, i, buff[5]; - - /* Check battery temperature */ - for (i=0; i<5; i++) { - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); - buff[i] = sharpsl_read_temp(); - } - - val = get_select_val(buff); - - dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val); - if (val > SHARPSL_CHARGE_ON_TEMP) - return -1; - - return 0; -} - -static int sharpsl_check_battery_voltage(void) -{ - int val, i, buff[5]; - - /* disable charge, enable discharge */ - CHARGE_OFF(); - DISCHARGE_ON(); - mdelay(SHARPSL_WAIT_DISCHARGE_ON); - - if (sharpsl_pm.machinfo->discharge1) - sharpsl_pm.machinfo->discharge1(1); - - /* Check battery voltage */ - for (i=0; i<5; i++) { - buff[i] = sharpsl_read_main_battery(); - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); - } - - if (sharpsl_pm.machinfo->discharge1) - sharpsl_pm.machinfo->discharge1(0); - - DISCHARGE_OFF(); - - val = get_select_val(buff); - dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val); - - if (val < SHARPSL_CHARGE_ON_VOLT) - return -1; - - return 0; -} - -static int sharpsl_ac_check(void) -{ - int temp, i, buff[5]; - - for (i=0; i<5; i++) { - buff[i] = sharpsl_read_acin(); - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN); - } - - temp = get_select_val(buff); - dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp); - - if ((temp > SHARPSL_CHARGE_ON_ACIN_HIGH) || (temp < SHARPSL_CHARGE_ON_ACIN_LOW)) { - dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); - return -1; - } - - return 0; -} - -#ifdef CONFIG_PM -static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state) -{ - sharpsl_pm.flags |= SHARPSL_SUSPENDED; - flush_scheduled_work(); - - if (sharpsl_pm.charge_mode == CHRG_ON) - sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; - else - sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; - - return 0; -} - -static int sharpsl_pm_resume(struct platform_device *pdev) -{ - /* Clear the reset source indicators as they break the bootloader upon reboot */ - RCSR = 0x0f; - sharpsl_average_clear(); - sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED; - sharpsl_pm.flags &= ~SHARPSL_SUSPENDED; - - return 0; -} - -static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) -{ - dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR); - - dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); - /* not charging and AC-IN! */ - - if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (STATUS_AC_IN() != 0)) { - dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n"); - sharpsl_pm.charge_mode = CHRG_OFF; - sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; - sharpsl_off_charge_battery(); - } - - sharpsl_pm.machinfo->presuspend(); - - PEDR = 0xffffffff; /* clear it */ - - sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE; - if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) { - RTSR &= RTSR_ALE; - RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND; - dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR); - sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE; - } else if (alarm_enable) { - RTSR &= RTSR_ALE; - RTAR = alarm_time; - dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR); - } else { - dev_dbg(sharpsl_pm.dev, "No alarms set.\n"); - } - - pxa_pm_enter(state); - - sharpsl_pm.machinfo->postsuspend(); - - dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR); -} - -static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) -{ - if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) ) - { - if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) { - dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n"); - corgi_goto_sleep(alarm_time, alarm_enable, state); - return 1; - } - if(sharpsl_off_charge_battery()) { - dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n"); - corgi_goto_sleep(alarm_time, alarm_enable, state); - return 1; - } - dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n"); - } - - if ((STATUS_BATT_LOCKED() == 0) || (sharpsl_fatal_check() < 0) ) - { - dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n"); - corgi_goto_sleep(alarm_time, alarm_enable, state); - return 1; - } - - return 0; -} - -static int corgi_pxa_pm_enter(suspend_state_t state) -{ - unsigned long alarm_time = RTAR; - unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0); - - dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n"); - - corgi_goto_sleep(alarm_time, alarm_status, state); - - while (corgi_enter_suspend(alarm_time,alarm_status,state)) - {} - - dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n"); - - return 0; -} -#endif - - -/* - * Check for fatal battery errors - * Fatal returns -1 - */ -static int sharpsl_fatal_check(void) -{ - int buff[5], temp, i, acin; - - dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n"); - - /* Check AC-Adapter */ - acin = STATUS_AC_IN(); - - if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { - CHARGE_OFF(); - udelay(100); - DISCHARGE_ON(); /* enable discharge */ - mdelay(SHARPSL_WAIT_DISCHARGE_ON); - } - - if (sharpsl_pm.machinfo->discharge1) - sharpsl_pm.machinfo->discharge1(1); - - /* Check battery : check inserting battery ? */ - for (i=0; i<5; i++) { - buff[i] = sharpsl_read_main_battery(); - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); - } - - if (sharpsl_pm.machinfo->discharge1) - sharpsl_pm.machinfo->discharge1(0); - - if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { - udelay(100); - CHARGE_ON(); - DISCHARGE_OFF(); - } - - temp = get_select_val(buff); - dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_read_main_battery()); - - if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) || - (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT))) - return -1; - return 0; -} - -static int sharpsl_off_charge_error(void) -{ - dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n"); - CHARGE_OFF(); - CHARGE_LED_ERR(); - sharpsl_pm.charge_mode = CHRG_ERROR; - return 1; -} - -/* - * Charging Control while suspended - * Return 1 - go straight to sleep - * Return 0 - sleep or wakeup depending on other factors - */ -static int sharpsl_off_charge_battery(void) -{ - int time; - - dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode); - - if (sharpsl_pm.charge_mode == CHRG_OFF) { - dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n"); - - /* AC Check */ - if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0)) - return sharpsl_off_charge_error(); - - /* Start Charging */ - CHARGE_LED_ON(); - CHARGE_OFF(); - mdelay(SHARPSL_CHARGE_WAIT_TIME); - CHARGE_ON(); - - sharpsl_pm.charge_mode = CHRG_ON; - sharpsl_pm.full_count = 0; - - return 1; - } else if (sharpsl_pm.charge_mode != CHRG_ON) { - return 1; - } - - if (sharpsl_pm.full_count == 0) { - int time; - - dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n"); - - if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0)) - return sharpsl_off_charge_error(); - - CHARGE_OFF(); - mdelay(SHARPSL_CHARGE_WAIT_TIME); - CHARGE_ON(); - sharpsl_pm.charge_mode = CHRG_ON; - - mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); - - time = RCNR; - while(1) { - /* Check if any wakeup event had occured */ - if (sharpsl_pm.machinfo->charger_wakeup() != 0) - return 0; - /* Check for timeout */ - if ((RCNR - time) > SHARPSL_WAIT_CO_TIME) - return 1; - if (STATUS_CHRG_FULL()) { - dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n"); - sharpsl_pm.full_count++; - CHARGE_OFF(); - mdelay(SHARPSL_CHARGE_WAIT_TIME); - CHARGE_ON(); - return 1; - } - } - } - - dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n"); - - mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); - - time = RCNR; - while(1) { - /* Check if any wakeup event had occured */ - if (sharpsl_pm.machinfo->charger_wakeup() != 0) - return 0; - /* Check for timeout */ - if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) { - if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) { - dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n"); - sharpsl_pm.full_count = 0; - } - sharpsl_pm.full_count++; - return 1; - } - if (STATUS_CHRG_FULL()) { - dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n"); - CHARGE_LED_OFF(); - CHARGE_OFF(); - sharpsl_pm.charge_mode = CHRG_DONE; - return 1; - } - } -} - - -static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent); -} - -static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage); -} - -static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL); -static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL); - -extern void (*apm_get_power_status)(struct apm_power_info *); - -static void sharpsl_apm_get_power_status(struct apm_power_info *info) -{ - info->ac_line_status = sharpsl_pm.battstat.ac_status; - - if (sharpsl_pm.charge_mode == CHRG_ON) - info->battery_status = APM_BATTERY_STATUS_CHARGING; - else - info->battery_status = sharpsl_pm.battstat.mainbat_status; - - info->battery_flag = (1 << info->battery_status); - info->battery_life = sharpsl_pm.battstat.mainbat_percent; -} - -static struct pm_ops sharpsl_pm_ops = { - .pm_disk_mode = PM_DISK_FIRMWARE, - .prepare = pxa_pm_prepare, - .enter = corgi_pxa_pm_enter, - .finish = pxa_pm_finish, -}; - -static int __init sharpsl_pm_probe(struct platform_device *pdev) -{ - if (!pdev->dev.platform_data) - return -EINVAL; - - sharpsl_pm.dev = &pdev->dev; - sharpsl_pm.machinfo = pdev->dev.platform_data; - sharpsl_pm.charge_mode = CHRG_OFF; - sharpsl_pm.flags = 0; - - sharpsl_pm.machinfo->init(); - - init_timer(&sharpsl_pm.ac_timer); - sharpsl_pm.ac_timer.function = sharpsl_ac_timer; - - init_timer(&sharpsl_pm.chrg_full_timer); - sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer; - pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN); pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN); pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN); @@ -938,26 +165,10 @@ static int __init sharpsl_pm_probe(struct platform_device *pdev) } else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING); } - - device_create_file(&pdev->dev, &dev_attr_battery_percentage); - device_create_file(&pdev->dev, &dev_attr_battery_voltage); - - apm_get_power_status = sharpsl_apm_get_power_status; - - pm_set_ops(&sharpsl_pm_ops); - - mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); - - return 0; } -static int sharpsl_pm_remove(struct platform_device *pdev) +void sharpsl_pm_pxa_remove(void) { - pm_set_ops(NULL); - - device_remove_file(&pdev->dev, &dev_attr_battery_percentage); - device_remove_file(&pdev->dev, &dev_attr_battery_voltage); - free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr); free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr); @@ -966,32 +177,4 @@ static int sharpsl_pm_remove(struct platform_device *pdev) if (!machine_is_corgi()) free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr); - - del_timer_sync(&sharpsl_pm.chrg_full_timer); - del_timer_sync(&sharpsl_pm.ac_timer); - - return 0; } - -static struct platform_driver sharpsl_pm_driver = { - .probe = sharpsl_pm_probe, - .remove = sharpsl_pm_remove, - .suspend = sharpsl_pm_suspend, - .resume = sharpsl_pm_resume, - .driver = { - .name = "sharpsl-pm", - }, -}; - -static int __devinit sharpsl_pm_init(void) -{ - return platform_driver_register(&sharpsl_pm_driver); -} - -static void sharpsl_pm_exit(void) -{ - platform_driver_unregister(&sharpsl_pm_driver); -} - -late_initcall(sharpsl_pm_init); -module_exit(sharpsl_pm_exit); diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 3ce7486daa51..76a5c26dea0b 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -33,19 +34,7 @@ static void spitz_charger_init(void) { pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN); pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN); -} - -static void spitz_charge_led(int val) -{ - if (val == SHARPSL_LED_ERROR) { - dev_dbg(sharpsl_pm.dev, "Charge LED Error\n"); - } else if (val == SHARPSL_LED_ON) { - dev_dbg(sharpsl_pm.dev, "Charge LED On\n"); - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE); - } else { - dev_dbg(sharpsl_pm.dev, "Charge LED Off\n"); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE); - } + sharpsl_pm_pxa_init(); } static void spitz_measure_temp(int on) @@ -92,7 +81,7 @@ static void spitz_discharge1(int on) static void spitz_presuspend(void) { - spitz_last_ac_status = STATUS_AC_IN(); + spitz_last_ac_status = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); /* GPIO Sleep Register */ PGSR0 = 0x00144018; @@ -138,7 +127,7 @@ static void spitz_postsuspend(void) static int spitz_should_wakeup(unsigned int resume_on_alarm) { int is_resume = 0; - int acin = STATUS_AC_IN(); + int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); if (spitz_last_ac_status != acin) { if (acin) { @@ -148,8 +137,8 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm) } else { /* charge off */ dev_dbg(sharpsl_pm.dev, "AC Removed\n"); - CHARGE_LED_OFF(); - CHARGE_OFF(); + sharpsl_pm_led(SHARPSL_LED_OFF); + sharpsl_pm.machinfo->charge(0); sharpsl_pm.charge_mode = CHRG_OFF; } spitz_last_ac_status = acin; @@ -175,25 +164,41 @@ static unsigned long spitz_charger_wakeup(void) return (~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 & GPIO_bit(SPITZ_GPIO_SYNC)); } -static int spitz_acin_status(void) +unsigned long spitzpm_read_devdata(int type) { - return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0); + switch(type) { + case SHARPSL_STATUS_ACIN: + return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0); + case SHARPSL_STATUS_LOCK: + return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock); + case SHARPSL_STATUS_CHRGFULL: + return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull); + case SHARPSL_STATUS_FATAL: + return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal); + case SHARPSL_ACIN_VOLT: + return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT); + case SHARPSL_BATT_TEMP: + return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP); + case SHARPSL_BATT_VOLT: + default: + return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT); + } } struct sharpsl_charger_machinfo spitz_pm_machinfo = { .init = spitz_charger_init, + .exit = sharpsl_pm_pxa_remove, .gpio_batlock = SPITZ_GPIO_BAT_COVER, .gpio_acin = SPITZ_GPIO_AC_IN, .gpio_batfull = SPITZ_GPIO_CHRG_FULL, .gpio_fatal = SPITZ_GPIO_FATAL_BAT, - .status_acin = spitz_acin_status, .discharge = spitz_discharge, .discharge1 = spitz_discharge1, .charge = spitz_charge, - .chargeled = spitz_charge_led, .measure_temp = spitz_measure_temp, .presuspend = spitz_presuspend, .postsuspend = spitz_postsuspend, + .read_devdata = spitzpm_read_devdata, .charger_wakeup = spitz_charger_wakeup, .should_wakeup = spitz_should_wakeup, .bat_levels = 40, diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c index 6a219b2c77e3..d0aaf450e8c7 100644 --- a/drivers/video/backlight/corgi_bl.c +++ b/drivers/video/backlight/corgi_bl.c @@ -20,6 +20,7 @@ #include #include +#include #define CORGI_DEFAULT_INTENSITY 0x1f #define CORGI_LIMIT_MASK 0x0b diff --git a/include/asm-arm/hardware/sharpsl_pm.h b/include/asm-arm/hardware/sharpsl_pm.h new file mode 100644 index 000000000000..36983e5f3665 --- /dev/null +++ b/include/asm-arm/hardware/sharpsl_pm.h @@ -0,0 +1,94 @@ +/* + * SharpSL Battery/PM Driver + * + * Copyright (c) 2004-2005 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include + +struct sharpsl_charger_machinfo { + void (*init)(void); + void (*exit)(void); + int gpio_acin; + int gpio_batfull; + int gpio_batlock; + int gpio_fatal; + void (*discharge)(int); + void (*discharge1)(int); + void (*charge)(int); + void (*measure_temp)(int); + void (*presuspend)(void); + void (*postsuspend)(void); + unsigned long (*read_devdata)(int); +#define SHARPSL_BATT_VOLT 1 +#define SHARPSL_BATT_TEMP 2 +#define SHARPSL_ACIN_VOLT 3 +#define SHARPSL_STATUS_ACIN 4 +#define SHARPSL_STATUS_LOCK 5 +#define SHARPSL_STATUS_CHRGFULL 6 +#define SHARPSL_STATUS_FATAL 7 + unsigned long (*charger_wakeup)(void); + int (*should_wakeup)(unsigned int resume_on_alarm); + int bat_levels; + struct battery_thresh *bat_levels_noac; + struct battery_thresh *bat_levels_acin; + int status_high_acin; + int status_low_acin; + int status_high_noac; + int status_low_noac; +}; + +struct battery_thresh { + int voltage; + int percentage; +}; + +struct battery_stat { + int ac_status; /* APM AC Present/Not Present */ + int mainbat_status; /* APM Main Battery Status */ + int mainbat_percent; /* Main Battery Percentage Charge */ + int mainbat_voltage; /* Main Battery Voltage */ +}; + +struct sharpsl_pm_status { + struct device *dev; + struct timer_list ac_timer; + struct timer_list chrg_full_timer; + + int charge_mode; +#define CHRG_ERROR (-1) +#define CHRG_OFF (0) +#define CHRG_ON (1) +#define CHRG_DONE (2) + + unsigned int flags; +#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */ +#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */ +#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */ +#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */ +#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */ + + int full_count; + unsigned long charge_start_time; + struct sharpsl_charger_machinfo *machinfo; + struct battery_stat battstat; +}; + +extern struct sharpsl_pm_status sharpsl_pm; + + +#define SHARPSL_LED_ERROR 2 +#define SHARPSL_LED_ON 1 +#define SHARPSL_LED_OFF 0 + +void sharpsl_battery_kick(void); +void sharpsl_pm_led(int val); +irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp); +irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp); +irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp); + From 53b7c2b243bd31f857dddabd9339f2dd6ae3fb67 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Thu, 5 Jan 2006 20:44:55 +0000 Subject: [PATCH 24/36] [ARM] 3229/1: Remove uneeded ARM apm dependency on PM_LEGACY Patch from Richard Purdie ARM doesn't use ACPI so ARM's apm implementation has no need to depend on PM_LEGACY. This patch removes that dependency. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/Kconfig | 1 - arch/arm/kernel/apm.c | 19 +++++++------------ 2 files changed, 7 insertions(+), 13 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cb413109da0c..16a5d522b2f2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -660,7 +660,6 @@ source "kernel/power/Kconfig" config APM tristate "Advanced Power Management Emulation" - depends on PM_LEGACY ---help--- APM is a BIOS specification for saving power using several different techniques. This is mostly useful for battery powered laptops with diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c index a2843be05557..b9df1b782bb1 100644 --- a/arch/arm/kernel/apm.c +++ b/arch/arm/kernel/apm.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include @@ -81,6 +80,7 @@ struct apm_user { */ static int suspends_pending; static int apm_disabled; +static int arm_apm_active; static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue); static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue); @@ -477,9 +477,9 @@ static int kapmd(void *arg) apm_event_t event; wait_event_interruptible(kapmd_wait, - !queue_empty(&kapmd_queue) || !pm_active); + !queue_empty(&kapmd_queue) || !arm_apm_active); - if (!pm_active) + if (!arm_apm_active) break; spin_lock_irq(&kapmd_queue_lock); @@ -522,16 +522,11 @@ static int __init apm_init(void) return -ENODEV; } - if (PM_IS_ACTIVE()) { - printk(KERN_NOTICE "apm: overridden by ACPI.\n"); - return -EINVAL; - } - - pm_active = 1; + arm_apm_active = 1; ret = kernel_thread(kapmd, NULL, CLONE_KERNEL); if (ret < 0) { - pm_active = 0; + arm_apm_active = 0; return ret; } @@ -543,7 +538,7 @@ static int __init apm_init(void) if (ret != 0) { remove_proc_entry("apm", NULL); - pm_active = 0; + arm_apm_active = 0; wake_up(&kapmd_wait); wait_for_completion(&kapmd_exit); } @@ -556,7 +551,7 @@ static void __exit apm_exit(void) misc_deregister(&apm_device); remove_proc_entry("apm", NULL); - pm_active = 0; + arm_apm_active = 0; wake_up(&kapmd_wait); wait_for_completion(&kapmd_exit); } From 945b957972844881002ab4f68534581f4427a30b Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Thu, 5 Jan 2006 20:44:57 +0000 Subject: [PATCH 25/36] [ARM] 3230/1: Sharp Scoop: Fix Shared Power Control Issues Patch from Richard Purdie The SL-Cxx00 devices have a power control register in SCOOP that is shared by both CF and MMC/SD card slots. The CF reset code was resetting this register leading to various lockups as the MMC power was suddenly lost. This patch handles the CPR register in a more sensitive manner. It also removes some unneeded collie specific calls as the reset code handles this. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/common/scoop.c | 2 +- arch/arm/mach-pxa/spitz.c | 4 +++- drivers/pcmcia/pxa2xx_sharpsl.c | 24 ++++++++++++------------ 3 files changed, 16 insertions(+), 14 deletions(-) diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 0c3cbd9a388b..b6de43e73699 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -33,7 +33,6 @@ void reset_scoop(struct device *dev) SCOOP_REG(sdev->base,SCOOP_MCR) = 0x0100; // 00 SCOOP_REG(sdev->base,SCOOP_CDR) = 0x0000; // 04 - SCOOP_REG(sdev->base,SCOOP_CPR) = 0x0000; // 0C SCOOP_REG(sdev->base,SCOOP_CCR) = 0x0000; // 10 SCOOP_REG(sdev->base,SCOOP_IMR) = 0x0000; // 18 SCOOP_REG(sdev->base,SCOOP_IRM) = 0x00FF; // 14 @@ -154,6 +153,7 @@ int __init scoop_probe(struct platform_device *pdev) SCOOP_REG(devptr->base, SCOOP_MCR) = 0x0140; reset_scoop(&pdev->dev); + SCOOP_REG(devptr->base, SCOOP_CPR) = 0x0000; SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff; SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff; diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 5d34abc64af7..f2007db0cda5 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -127,10 +127,12 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr) cpr &= ~0x0002; if (device == SPITZ_PWR_SD) cpr &= ~0x0004; - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); if (!(cpr & 0x0002) && !(cpr & 0x0004)) { + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000); mdelay(1); reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + } else { + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); } } } diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c index 56c58831e80e..4fbd995360b0 100644 --- a/drivers/pcmcia/pxa2xx_sharpsl.c +++ b/drivers/pcmcia/pxa2xx_sharpsl.c @@ -36,9 +36,18 @@ struct scoop_pcmcia_config *platform_scoop_config; #define SCOOP_DEV platform_scoop_config->devs -static void sharpsl_pcmcia_init_reset(struct scoop_pcmcia_dev *scoopdev) +static void sharpsl_pcmcia_init_reset(struct soc_pcmcia_socket *skt) { + struct scoop_pcmcia_dev *scoopdev = &SCOOP_DEV[skt->nr]; + reset_scoop(scoopdev->dev); + + /* Shared power controls need to be handled carefully */ + if (platform_scoop_config->power_ctrl) + platform_scoop_config->power_ctrl(scoopdev->dev, 0x0000, skt->nr); + else + write_scoop_reg(scoopdev->dev, SCOOP_CPR, 0x0000); + scoopdev->keep_vs = NO_KEEP_VS; scoopdev->keep_rd = 0; } @@ -208,26 +217,17 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, static void sharpsl_pcmcia_socket_init(struct soc_pcmcia_socket *skt) { - sharpsl_pcmcia_init_reset(&SCOOP_DEV[skt->nr]); + sharpsl_pcmcia_init_reset(skt); /* Enable interrupt */ write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_IMR, 0x00C0); write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_MCR, 0x0101); SCOOP_DEV[skt->nr].keep_vs = NO_KEEP_VS; - - if (machine_is_collie()) - /* We need to disable SS_OUTPUT_ENA here. */ - write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR, read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR) & ~0x0080); } static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) { - /* CF_BUS_OFF */ - sharpsl_pcmcia_init_reset(&SCOOP_DEV[skt->nr]); - - if (machine_is_collie()) - /* We need to disable SS_OUTPUT_ENA here. */ - write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR, read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR) & ~0x0080); + sharpsl_pcmcia_init_reset(skt); } static struct pcmcia_low_level sharpsl_pcmcia_ops = { From 6a2273d6fc627d28a4de9beadf77ae6636b1e5d0 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 5 Jan 2006 20:44:58 +0000 Subject: [PATCH 26/36] [ARM] 3231/1: mx1ads board support cleanup Patch from Sascha Hauer - remove unnecessary mappings - rename mx1ads_device to cs89x0_device, because that's what it is - fix io/irq resource for cs89x0 device Signed-off-by: Sascha Hauer Signed-off-by: Russell King --- arch/arm/mach-imx/mx1ads.c | 55 +++++++------------------------------- 1 file changed, 10 insertions(+), 45 deletions(-) diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index 708e1b3faa14..c9e0cd8ed016 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -29,27 +29,27 @@ #include "generic.h" #include -static struct resource mx1ads_resources[] = { +static struct resource cs89x0_resources[] = { [0] = { - .start = IMX_CS4_VIRT, - .end = IMX_CS4_VIRT + 16, + .start = IMX_CS4_PHYS + 0x300, + .end = IMX_CS4_PHYS + 0x300 + 16, .flags = IORESOURCE_MEM, }, [1] = { - .start = 13, - .end = 13, + .start = IRQ_GPIOC(17), + .end = IRQ_GPIOC(17), .flags = IORESOURCE_IRQ, }, }; -static struct platform_device mx1ads_device = { - .name = "mx1ads", - .num_resources = ARRAY_SIZE(mx1ads_resources), - .resource = mx1ads_resources, +static struct platform_device cs89x0_device = { + .name = "cirrus-cs89x0", + .num_resources = ARRAY_SIZE(cs89x0_resources), + .resource = cs89x0_resources, }; static struct platform_device *devices[] __initdata = { - &mx1ads_device, + &cs89x0_device, }; static void __init @@ -61,45 +61,10 @@ mx1ads_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } -static struct map_desc mx1ads_io_desc[] __initdata = { - { - .virtual = IMX_CS0_VIRT, - .pfn = __phys_to_pfn(IMX_CS0_PHYS), - .length = IMX_CS0_SIZE, - .type = MT_DEVICE - }, { - .virtual = IMX_CS1_VIRT, - .pfn = __phys_to_pfn(IMX_CS1_PHYS), - .length = IMX_CS1_SIZE, - .type = MT_DEVICE - }, { - .virtual = IMX_CS2_VIRT, - .pfn = __phys_to_pfn(IMX_CS2_PHYS), - .length = IMX_CS2_SIZE, - .type = MT_DEVICE - }, { - .virtual = IMX_CS3_VIRT, - .pfn = __phys_to_pfn(IMX_CS3_PHYS), - .length = IMX_CS3_SIZE, - .type = MT_DEVICE - }, { - .virtual = IMX_CS4_VIRT, - .pfn = __phys_to_pfn(IMX_CS4_PHYS), - .length = IMX_CS4_SIZE, - .type = MT_DEVICE - }, { - .virtual = IMX_CS5_VIRT, - .pfn = __phys_to_pfn(IMX_CS5_PHYS), - .length = IMX_CS5_SIZE, - .type = MT_DEVICE - } -}; - static void __init mx1ads_map_io(void) { imx_map_io(); - iotable_init(mx1ads_io_desc, ARRAY_SIZE(mx1ads_io_desc)); } MACHINE_START(MX1ADS, "Motorola MX1ADS") From 2b9ac7c15c0c5c9d6057b9e297dabaebd208ffe8 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 5 Jan 2006 20:53:02 +0000 Subject: [PATCH 27/36] [ARM] 3217/1: iop331 uarts as platform devices Patch from Dan Williams Convert old-style serial devices to platform devices so that printk's are visible during the boot process. Signed-off-by: Dan Williams Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-iop3xx/iop331-setup.c | 94 +++++++++++++++++++++-------- 1 file changed, 68 insertions(+), 26 deletions(-) diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c index 53f60614498b..e6ea1cba6a17 100644 --- a/arch/arm/mach-iop3xx/iop331-setup.c +++ b/arch/arm/mach-iop3xx/iop331-setup.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #include @@ -50,32 +50,74 @@ static struct map_desc iop331_std_desc[] __initdata = { } }; -static struct uart_port iop331_serial_ports[] = { - { - .membase = (char*)(IOP331_UART0_VIRT), - .mapbase = (IOP331_UART0_PHYS), - .irq = IRQ_IOP331_UART0, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IOP331_UART_XTAL, - .line = 0, - .type = PORT_XSCALE, - .fifosize = 32 - } , { - .membase = (char*)(IOP331_UART1_VIRT), - .mapbase = (IOP331_UART1_PHYS), - .irq = IRQ_IOP331_UART1, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IOP331_UART_XTAL, - .line = 1, - .type = PORT_XSCALE, - .fifosize = 32 +static struct resource iop33x_uart0_resources[] = { + [0] = { + .start = IOP331_UART0_PHYS, + .end = IOP331_UART0_PHYS + 0x3f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP331_UART0, + .end = IRQ_IOP331_UART0, + .flags = IORESOURCE_IRQ } }; +static struct resource iop33x_uart1_resources[] = { + [0] = { + .start = IOP331_UART1_PHYS, + .end = IOP331_UART1_PHYS + 0x3f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP331_UART1, + .end = IRQ_IOP331_UART1, + .flags = IORESOURCE_IRQ + } +}; + +static struct plat_serial8250_port iop33x_uart0_data[] = { + { + .membase = (char*)(IOP331_UART0_VIRT), + .mapbase = (IOP331_UART0_PHYS), + .irq = IRQ_IOP331_UART0, + .uartclk = IOP331_UART_XTAL, + .regshift = 2, + .iotype = UPIO_MEM, + .flags = UPF_SKIP_TEST, + }, + { }, +}; + +static struct plat_serial8250_port iop33x_uart1_data[] = { + { + .membase = (char*)(IOP331_UART1_VIRT), + .mapbase = (IOP331_UART1_PHYS), + .irq = IRQ_IOP331_UART1, + .uartclk = IOP331_UART_XTAL, + .regshift = 2, + .iotype = UPIO_MEM, + .flags = UPF_SKIP_TEST, + }, + { }, +}; + +static struct platform_device iop33x_uart0 = { + .name = "serial8250", + .id = 0, + .dev.platform_data = iop33x_uart0_data, + .num_resources = 2, + .resource = iop33x_uart0_resources, +}; + +static struct platform_device iop33x_uart1 = { + .name = "serial8250", + .id = 1, + .dev.platform_data = iop33x_uart1_data, + .num_resources = 2, + .resource = iop33x_uart1_resources, +}; + static struct resource iop33x_i2c_0_resources[] = { [0] = { .start = 0xfffff680, @@ -117,6 +159,8 @@ static struct platform_device iop33x_i2c_1_controller = { }; static struct platform_device *iop33x_devices[] __initdata = { + &iop33x_uart0, + &iop33x_uart1, &iop33x_i2c_0_controller, &iop33x_i2c_1_controller }; @@ -133,8 +177,6 @@ void __init iop33x_init(void) void __init iop331_map_io(void) { iotable_init(iop331_std_desc, ARRAY_SIZE(iop331_std_desc)); - early_serial_setup(&iop331_serial_ports[0]); - early_serial_setup(&iop331_serial_ports[1]); } #ifdef CONFIG_ARCH_IOP331 From 54e269ead6e672325866037b0617a72edd1396b9 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Thu, 5 Jan 2006 20:59:29 +0000 Subject: [PATCH 28/36] [ARM] 3226/1: IXP4xx runtime expansion bus window size configuration Patch from Deepak Saxena The expansion bus on the IXP46x NPU can be configured for either 32MiB or 16MiB windows and changing the configuration causes the base address for each chip select for each region to change. Because of this, we cannot hardcode the physical base as we currently do. This patch checks the expansion bus configuration registers at runtime to determine the appropriate window size. Note that this requires that the bootloader already configured the device sizes appropriately, but I feel that is valid assumption to make as the bootloader must configure and access the flash window, the output display (LCD, LEDs, etc) window, and other expansion bus devices. Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-ixp4xx/common.c | 16 ++++++++++++++++ arch/arm/mach-ixp4xx/coyote-setup.c | 10 ++++++---- arch/arm/mach-ixp4xx/gtwx5715-setup.c | 15 +++++++++++---- arch/arm/mach-ixp4xx/ixdp425-setup.c | 13 ++++--------- arch/arm/mach-ixp4xx/nas100d-setup.c | 6 ++++-- include/asm-arm/arch-ixp4xx/coyote.h | 5 +---- include/asm-arm/arch-ixp4xx/gtwx5715.h | 4 ---- include/asm-arm/arch-ixp4xx/ixdp425.h | 3 --- include/asm-arm/arch-ixp4xx/nas100d.h | 3 --- include/asm-arm/arch-ixp4xx/nslu2.h | 3 --- include/asm-arm/arch-ixp4xx/platform.h | 19 ++++++++++--------- 11 files changed, 52 insertions(+), 45 deletions(-) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 9f33cb21e7f3..6b393691d0e8 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -332,11 +332,27 @@ static struct platform_device *ixp46x_devices[] __initdata = { &ixp46x_i2c_controller }; +unsigned long ixp4xx_exp_bus_size; + void __init ixp4xx_sys_init(void) { + ixp4xx_exp_bus_size = SZ_16M; + if (cpu_is_ixp46x()) { + int region; + platform_add_devices(ixp46x_devices, ARRAY_SIZE(ixp46x_devices)); + + for (region = 0; region < 7; region++) { + if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) { + ixp4xx_exp_bus_size = SZ_32M; + break; + } + } } + + printk("IXP4xx: Using %uMiB expansion bus window size\n", + ixp4xx_exp_bus_size >> 20); } diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index 050c92768913..679594a73981 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -30,8 +31,6 @@ static struct flash_platform_data coyote_flash_data = { }; static struct resource coyote_flash_resource = { - .start = COYOTE_FLASH_BASE, - .end = COYOTE_FLASH_BASE + COYOTE_FLASH_SIZE - 1, .flags = IORESOURCE_MEM, }; @@ -81,6 +80,11 @@ static struct platform_device *coyote_devices[] __initdata = { static void __init coyote_init(void) { + ixp4xx_sys_init(); + + coyote_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + coyote_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; + *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; @@ -91,8 +95,6 @@ static void __init coyote_init(void) coyote_uart_data[0].irq = IRQ_IXP4XX_UART1; } - - ixp4xx_sys_init(); platform_add_devices(coyote_devices, ARRAY_SIZE(coyote_devices)); } diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index 29a6d02fa851..038670489970 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -106,11 +107,9 @@ static struct flash_platform_data gtwx5715_flash_data = { .width = 2, }; -static struct resource gtwx5715_flash_resource = { - .start = GTWX5715_FLASH_BASE, - .end = GTWX5715_FLASH_BASE + GTWX5715_FLASH_SIZE - 1, +static struct gtw5715_flash_resource = { .flags = IORESOURCE_MEM, -}; +} static struct platform_device gtwx5715_flash = { .name = "IXP4XX-Flash", @@ -129,6 +128,14 @@ static struct platform_device *gtwx5715_devices[] __initdata = { static void __init gtwx5715_init(void) { + ixp4xx_sys_init(); + + if (!flash_resource) + printk(KERN_ERR "Could not allocate flash resource\n"); + + gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1; + platform_add_devices(gtwx5715_devices, ARRAY_SIZE(gtwx5715_devices)); } diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 3a22d84e1047..c2e105c89c95 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -30,8 +31,6 @@ static struct flash_platform_data ixdp425_flash_data = { }; static struct resource ixdp425_flash_resource = { - .start = IXDP425_FLASH_BASE, - .end = IXDP425_FLASH_BASE + IXDP425_FLASH_SIZE - 1, .flags = IORESOURCE_MEM, }; @@ -108,17 +107,13 @@ static struct platform_device *ixdp425_devices[] __initdata = { &ixdp425_uart }; - static void __init ixdp425_init(void) { ixp4xx_sys_init(); - /* - * IXP465 has 32MB window - */ - if (machine_is_ixdp465()) { - ixdp425_flash_resource.end += IXDP425_FLASH_SIZE; - } + ixdp425_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + ixdp425_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices)); } diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index bde9648e7afc..49998a8bd4e8 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -26,8 +26,6 @@ static struct flash_platform_data nas100d_flash_data = { }; static struct resource nas100d_flash_resource = { - .start = NAS100D_FLASH_BASE, - .end = NAS100D_FLASH_BASE + NAS100D_FLASH_SIZE, .flags = IORESOURCE_MEM, }; @@ -115,6 +113,10 @@ static void __init nas100d_init(void) { ixp4xx_sys_init(); + nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + nas100d_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + pm_power_off = nas100d_power_off; platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices)); diff --git a/include/asm-arm/arch-ixp4xx/coyote.h b/include/asm-arm/arch-ixp4xx/coyote.h index dd0c2d2d8503..7ac9ba2c035c 100644 --- a/include/asm-arm/arch-ixp4xx/coyote.h +++ b/include/asm-arm/arch-ixp4xx/coyote.h @@ -16,9 +16,6 @@ #error "Do not include this directly, instead #include " #endif -#define COYOTE_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS -#define COYOTE_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE * 2 - /* PCI controller GPIO to IRQ pin mappings */ #define COYOTE_PCI_SLOT0_PIN 6 #define COYOTE_PCI_SLOT1_PIN 11 @@ -26,7 +23,7 @@ #define COYOTE_PCI_SLOT0_DEVID 14 #define COYOTE_PCI_SLOT1_DEVID 15 -#define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_CS3_BASE_PHYS +#define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_BASE(3) #define COYOTE_IDE_BASE_VIRT 0xFFFE1000 #define COYOTE_IDE_REGION_SIZE 0x1000 diff --git a/include/asm-arm/arch-ixp4xx/gtwx5715.h b/include/asm-arm/arch-ixp4xx/gtwx5715.h index fc460af70627..c3069d67c00e 100644 --- a/include/asm-arm/arch-ixp4xx/gtwx5715.h +++ b/include/asm-arm/arch-ixp4xx/gtwx5715.h @@ -57,10 +57,6 @@ #define GTWX5715_GPIO13_IRQ IRQ_IXP4XX_SW_INT1 #define GTWX5715_GPIO14_IRQ IRQ_IXP4XX_SW_INT2 - -#define GTWX5715_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS -#define GTWX5715_FLASH_SIZE (0x00800000) - /* PCI controller GPIO to IRQ pin mappings INTA INTB diff --git a/include/asm-arm/arch-ixp4xx/ixdp425.h b/include/asm-arm/arch-ixp4xx/ixdp425.h index 7d21bf941379..3d3820d7ba09 100644 --- a/include/asm-arm/arch-ixp4xx/ixdp425.h +++ b/include/asm-arm/arch-ixp4xx/ixdp425.h @@ -16,9 +16,6 @@ #error "Do not include this directly, instead #include " #endif -#define IXDP425_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS -#define IXDP425_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE - #define IXDP425_SDA_PIN 7 #define IXDP425_SCL_PIN 6 diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/include/asm-arm/arch-ixp4xx/nas100d.h index ce7a86a98fc2..51ac0180427c 100644 --- a/include/asm-arm/arch-ixp4xx/nas100d.h +++ b/include/asm-arm/arch-ixp4xx/nas100d.h @@ -19,9 +19,6 @@ #error "Do not include this directly, instead #include " #endif -#define NAS100D_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS -#define NAS100D_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE - #define NAS100D_SDA_PIN 6 #define NAS100D_SCL_PIN 5 diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h index b8b347a559c7..4281838873ef 100644 --- a/include/asm-arm/arch-ixp4xx/nslu2.h +++ b/include/asm-arm/arch-ixp4xx/nslu2.h @@ -18,9 +18,6 @@ #error "Do not include this directly, instead #include " #endif -#define NSLU2_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS -#define NSLU2_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE - #define NSLU2_SDA_PIN 7 #define NSLU2_SCL_PIN 6 diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h index 6b77ed26be79..daf9790645ca 100644 --- a/include/asm-arm/arch-ixp4xx/platform.h +++ b/include/asm-arm/arch-ixp4xx/platform.h @@ -26,16 +26,17 @@ */ #define IXP4XX_EXP_BUS_BASE_PHYS (0x50000000) -#define IXP4XX_EXP_BUS_CSX_REGION_SIZE (0x01000000) +/* + * The expansion bus on the IXP4xx can be configured for either 16 or + * 32MB windows and the CS offset for each region changes based on the + * current configuration. This means that we cannot simply hardcode + * each offset. ixp4xx_sys_init() looks at the expansion bus configuration + * as setup by the bootloader to determine our window size. + */ +extern unsigned long ixp4xx_exp_bus_size; -#define IXP4XX_EXP_BUS_CS0_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x00000000) -#define IXP4XX_EXP_BUS_CS1_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x01000000) -#define IXP4XX_EXP_BUS_CS2_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x02000000) -#define IXP4XX_EXP_BUS_CS3_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x03000000) -#define IXP4XX_EXP_BUS_CS4_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x04000000) -#define IXP4XX_EXP_BUS_CS5_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x05000000) -#define IXP4XX_EXP_BUS_CS6_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x06000000) -#define IXP4XX_EXP_BUS_CS7_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x07000000) +#define IXP4XX_EXP_BUS_BASE(region)\ + (IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size)) #define IXP4XX_FLASH_WRITABLE (0x2) #define IXP4XX_FLASH_DEFAULT (0xbcd23c40) From 5b2e98cdf3a6ac6c57de6a2156c673d4b0262684 Mon Sep 17 00:00:00 2001 From: Jared Hulbert Date: Thu, 5 Jan 2006 21:12:26 +0000 Subject: [PATCH 29/36] [ARM] 3206/1: Modifications to the bus arbiter controller for the Intel PXA27x Patch from Jared Hulbert The following patch changes the bus arbiter controller settings for the Intel PXA27x Application Processor Family. Up to 5% better video performance. It parks the bus on the core while not in use and sets the arbitration for other bus items. The patch only applies changes to the Intel Mainstone development platform. This patch is not compatible with preproduction Intel PXA27x silicon. This patch is based on the Intel Linux Preview Kit released to the public on 25 Feb. 2005 found at ftp://ftp.arm.linux.org.uk/pub/linux/arm/people/xscale/mainstone/02-25-2005/. Signed-off-by: Justin A Treon Signed-off-by: Jared Hulbert Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mach-pxa/mainstone.c | 6 ++++++ include/asm-arm/arch-pxa/pxa-regs.h | 12 ++++++++++++ 2 files changed, 18 insertions(+) diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 07892f4012d8..fe7404318aa8 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -407,6 +407,12 @@ static void __init mainstone_init(void) printk(KERN_NOTICE "Mainstone configured to boot from %s\n", mst_flash_data[0].name); + /* system bus arbiter setting + * - Core_Park + * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4 + */ + ARB_CNTRL = ARB_CORE_PARK | 0x234; + /* * On Mainstone, we route AC97_SYSCLK via GPIO45 to * the audio daughter card diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index a75a2470f4f5..dae138b9cac5 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -2042,6 +2042,18 @@ #ifdef CONFIG_PXA27x +#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ + +#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ +#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ +#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ +#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ +#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ +#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ +#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ +#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ +#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ + /* * Keypad */ From f99c89297cd6995ccad6394c87383941c2570fe9 Mon Sep 17 00:00:00 2001 From: Pavel Pisa Date: Sat, 7 Jan 2006 10:44:32 +0000 Subject: [PATCH 30/36] [ARM] 3232/1: i.MX Frame Buffer undeclared "dev" variable fix Patch from Pavel Pisa Correction of the code broken by update whole-tree platform devices update. Signed-off-by: Pavel Pisa Signed-off-by: Sascha Hauer Signed-off-by: Russell King --- drivers/video/imxfb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 5924cc225c95..1718baaeed2a 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -554,7 +554,7 @@ static int __init imxfb_probe(struct platform_device *pdev) inf = pdev->dev.platform_data; if(!inf) { - dev_err(dev,"No platform_data available\n"); + dev_err(&pdev->dev,"No platform_data available\n"); return -ENOMEM; } @@ -579,7 +579,7 @@ static int __init imxfb_probe(struct platform_device *pdev) if (!inf->fixed_screen_cpu) { ret = imxfb_map_video_memory(info); if (ret) { - dev_err(dev, "Failed to allocate video RAM: %d\n", ret); + dev_err(&pdev->dev, "Failed to allocate video RAM: %d\n", ret); ret = -ENOMEM; goto failed_map; } @@ -608,7 +608,7 @@ static int __init imxfb_probe(struct platform_device *pdev) imxfb_set_par(info); ret = register_framebuffer(info); if (ret < 0) { - dev_err(dev, "failed to register framebuffer\n"); + dev_err(&pdev->dev, "failed to register framebuffer\n"); goto failed_register; } From 2c041f4b9be5cecbd0a042ecd9122a9db6f50416 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Sat, 7 Jan 2006 11:12:26 +0000 Subject: [PATCH 31/36] [ARM] 3235/1: SharpSL PM: Fix a gcc4 build error Patch from Richard Purdie Fix a gcc4 build error (incomplete element type) in the pxa SharpSL PM code. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/corgi_pm.c | 1 - arch/arm/mach-pxa/sharpsl.h | 1 + arch/arm/mach-pxa/sharpsl_pm.c | 1 - arch/arm/mach-pxa/spitz_pm.c | 1 - 4 files changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index de8b2403c929..7a1ab73e9e10 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h index 92b793050509..da4769caaf72 100644 --- a/arch/arm/mach-pxa/sharpsl.h +++ b/arch/arm/mach-pxa/sharpsl.h @@ -7,6 +7,7 @@ * */ +#include /* * SharpSL SSP Driver diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index f6fefb181411..6d402b262d8a 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -27,7 +27,6 @@ #include #include #include -#include #include "sharpsl.h" struct battery_thresh spitz_battery_levels_acin[] = { diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 76a5c26dea0b..5e5bdc898482 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include From 6351610d6906aacbf9176cbdd045dd3876eec4c0 Mon Sep 17 00:00:00 2001 From: Andre McCurdy Date: Sat, 7 Jan 2006 11:39:20 +0000 Subject: [PATCH 32/36] [ARM] 3239/1: Add ARM optimised swab32 Patch from Andre McCurdy Replaces generic swab32 routine with a more ARM friendly version. Reduces kernel text size by approx 1200 bytes when compiled with 3.4.4 and approx 2400 bytes with 4.0.2 Probably some performance benefit as well. Signed-off-by: Andre McCurdy Signed-off-by: Russell King --- include/asm-arm/byteorder.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/include/asm-arm/byteorder.h b/include/asm-arm/byteorder.h index d648a1915c33..af42f449b9a6 100644 --- a/include/asm-arm/byteorder.h +++ b/include/asm-arm/byteorder.h @@ -15,9 +15,22 @@ #ifndef __ASM_ARM_BYTEORDER_H #define __ASM_ARM_BYTEORDER_H - #include +static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) +{ + __u32 t; + + t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ + x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */ + t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */ + x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */ + + return x; +} + +#define __arch__swab32(x) ___arch__swab32(x) + #if !defined(__STRICT_ANSI__) || defined(__KERNEL__) # define __BYTEORDER_HAS_U64__ # define __SWAB_64_THRU_32__ From a62c80e559809e6c7851ec04d30575e85ad6f6ed Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 7 Jan 2006 13:52:45 +0000 Subject: [PATCH 33/36] [ARM] Move AMBA include files to include/linux/amba/ Since the ARM AMBA bus is used on MIPS as well as ARM, we need to make the bus available for other architectures to use. Move the AMBA include files from include/asm-arm/hardware/ to include/linux/amba/ Signed-off-by: Russell King --- arch/arm/common/amba.c | 2 +- arch/arm/mach-aaec2000/core.c | 2 +- arch/arm/mach-aaec2000/core.h | 2 +- arch/arm/mach-integrator/core.c | 2 +- arch/arm/mach-integrator/impd1.c | 4 ++-- arch/arm/mach-integrator/integrator_ap.c | 4 ++-- arch/arm/mach-integrator/integrator_cp.c | 6 +++--- arch/arm/mach-integrator/time.c | 2 +- arch/arm/mach-realview/core.c | 4 ++-- arch/arm/mach-realview/core.h | 3 ++- arch/arm/mach-realview/realview_eb.c | 2 +- arch/arm/mach-versatile/core.c | 4 ++-- arch/arm/mach-versatile/core.h | 2 +- arch/arm/mach-versatile/versatile_ab.c | 2 +- arch/arm/mach-versatile/versatile_pb.c | 2 +- drivers/input/serio/ambakmi.c | 4 ++-- drivers/mmc/mmci.c | 2 +- drivers/serial/amba-pl010.c | 4 ++-- drivers/serial/amba-pl011.c | 4 ++-- drivers/video/amba-clcd.c | 5 ++--- include/asm-arm/arch-integrator/debug-macro.S | 2 +- include/asm-arm/arch-realview/debug-macro.S | 2 +- include/asm-arm/arch-versatile/debug-macro.S | 2 +- include/{asm-arm/hardware/amba.h => linux/amba/bus.h} | 0 include/{asm-arm/hardware/amba_clcd.h => linux/amba/clcd.h} | 0 include/{asm-arm/hardware/amba_kmi.h => linux/amba/kmi.h} | 0 .../{asm-arm/hardware/amba_serial.h => linux/amba/serial.h} | 0 sound/arm/aaci.c | 2 +- 28 files changed, 35 insertions(+), 35 deletions(-) rename include/{asm-arm/hardware/amba.h => linux/amba/bus.h} (100%) rename include/{asm-arm/hardware/amba_clcd.h => linux/amba/clcd.h} (100%) rename include/{asm-arm/hardware/amba_kmi.h => linux/amba/kmi.h} (100%) rename include/{asm-arm/hardware/amba_serial.h => linux/amba/serial.h} (100%) diff --git a/arch/arm/common/amba.c b/arch/arm/common/amba.c index e1013112c354..2bb0ce81bb69 100644 --- a/arch/arm/common/amba.c +++ b/arch/arm/common/amba.c @@ -12,10 +12,10 @@ #include #include #include +#include #include #include -#include #include #define to_amba_device(d) container_of(d, struct amba_device, dev) diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index 4e706d9ad368..dce4815cf53c 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -20,11 +20,11 @@ #include #include #include +#include #include #include #include -#include #include #include diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h index daefc0ea14a1..b6029a95f19c 100644 --- a/arch/arm/mach-aaec2000/core.h +++ b/arch/arm/mach-aaec2000/core.h @@ -9,7 +9,7 @@ * */ -#include +#include struct sys_timer; diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index dacbf504dae2..20071a2767cc 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -15,11 +15,11 @@ #include #include #include +#include #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index a4bafee77a06..a85d471c5bfa 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -18,11 +18,11 @@ #include #include #include +#include +#include #include #include -#include -#include #include #include #include diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 4c0f7c65facf..3afedeb56a6e 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -25,6 +25,8 @@ #include #include #include +#include +#include #include #include @@ -32,8 +34,6 @@ #include #include /* HZ */ #include -#include -#include #include diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 93f7ccb22c27..16cf2482a3e9 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -16,15 +16,15 @@ #include #include #include +#include +#include +#include #include #include #include #include #include -#include -#include -#include #include #include diff --git a/arch/arm/mach-integrator/time.c b/arch/arm/mach-integrator/time.c index 1a844ca139e0..9f46aaef8968 100644 --- a/arch/arm/mach-integrator/time.c +++ b/arch/arm/mach-integrator/time.c @@ -14,8 +14,8 @@ #include #include #include +#include -#include #include #include #include diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index af6580f1ceb8..4a222f59f2cf 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -24,14 +24,14 @@ #include #include #include +#include +#include #include #include #include #include #include -#include -#include #include #include diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index c06e6041df41..93e86d9f439c 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -22,7 +22,8 @@ #ifndef __ASM_ARCH_REALVIEW_H #define __ASM_ARCH_REALVIEW_H -#include +#include + #include #include diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 7dc32503fdf2..112f7592aca9 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -30,7 +31,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index a1ca46630dda..90023745b23a 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -25,14 +25,14 @@ #include #include #include +#include +#include #include #include #include #include #include -#include -#include #include #include diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h index 588c20669d5d..afcaa858eb1f 100644 --- a/arch/arm/mach-versatile/core.h +++ b/arch/arm/mach-versatile/core.h @@ -22,7 +22,7 @@ #ifndef __ASM_ARCH_VERSATILE_H #define __ASM_ARCH_VERSATILE_H -#include +#include extern void __init versatile_init(void); extern void __init versatile_init_irq(void); diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c index 8b0b3bef24ae..e74c8a2fbb95 100644 --- a/arch/arm/mach-versatile/versatile_ab.c +++ b/arch/arm/mach-versatile/versatile_ab.c @@ -23,12 +23,12 @@ #include #include #include +#include #include #include #include #include -#include #include diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index 7c3078c38916..22d5ca07f75d 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -23,12 +23,12 @@ #include #include #include +#include #include #include #include #include -#include #include #include diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c index d847ed51cfb1..cbab5d26377b 100644 --- a/drivers/input/serio/ambakmi.c +++ b/drivers/input/serio/ambakmi.c @@ -19,11 +19,11 @@ #include #include #include +#include +#include #include #include -#include -#include #include #define KMI_BASE (kmi->base) diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c index 31b0b6d612bf..57375bc12372 100644 --- a/drivers/mmc/mmci.c +++ b/drivers/mmc/mmci.c @@ -19,12 +19,12 @@ #include #include #include +#include #include #include #include #include -#include #include #include diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index ddd0307fece2..48f6e872314b 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -47,12 +47,12 @@ #include #include #include +#include +#include #include #include #include -#include -#include #define UART_NR 2 diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 531b0e4f25e5..4ae4dff59795 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -47,12 +47,12 @@ #include #include #include +#include +#include #include #include -#include #include -#include #define UART_NR 14 diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 69421c86252c..3358a1429651 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -21,13 +21,12 @@ #include #include #include +#include +#include #include -#include #include -#include - #define to_clcd(info) container_of(info, struct clcd_fb, fb) /* This is limited to 16 characters when displayed by X startup */ diff --git a/include/asm-arm/arch-integrator/debug-macro.S b/include/asm-arm/arch-integrator/debug-macro.S index 484a1aa47098..031d30941791 100644 --- a/include/asm-arm/arch-integrator/debug-macro.S +++ b/include/asm-arm/arch-integrator/debug-macro.S @@ -11,7 +11,7 @@ * */ -#include +#include .macro addruart,rx mrc p15, 0, \rx, c1, c0 diff --git a/include/asm-arm/arch-realview/debug-macro.S b/include/asm-arm/arch-realview/debug-macro.S index ed28bd012236..017ad996848d 100644 --- a/include/asm-arm/arch-realview/debug-macro.S +++ b/include/asm-arm/arch-realview/debug-macro.S @@ -11,7 +11,7 @@ * */ -#include +#include .macro addruart,rx mrc p15, 0, \rx, c1, c0 diff --git a/include/asm-arm/arch-versatile/debug-macro.S b/include/asm-arm/arch-versatile/debug-macro.S index 89e38ac1444e..ef6167116dbb 100644 --- a/include/asm-arm/arch-versatile/debug-macro.S +++ b/include/asm-arm/arch-versatile/debug-macro.S @@ -11,7 +11,7 @@ * */ -#include +#include .macro addruart,rx mrc p15, 0, \rx, c1, c0 diff --git a/include/asm-arm/hardware/amba.h b/include/linux/amba/bus.h similarity index 100% rename from include/asm-arm/hardware/amba.h rename to include/linux/amba/bus.h diff --git a/include/asm-arm/hardware/amba_clcd.h b/include/linux/amba/clcd.h similarity index 100% rename from include/asm-arm/hardware/amba_clcd.h rename to include/linux/amba/clcd.h diff --git a/include/asm-arm/hardware/amba_kmi.h b/include/linux/amba/kmi.h similarity index 100% rename from include/asm-arm/hardware/amba_kmi.h rename to include/linux/amba/kmi.h diff --git a/include/asm-arm/hardware/amba_serial.h b/include/linux/amba/serial.h similarity index 100% rename from include/asm-arm/hardware/amba_serial.h rename to include/linux/amba/serial.h diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index 559ead6367da..5b6cae50d0d5 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -17,11 +17,11 @@ #include #include #include +#include #include #include #include -#include #include #include From de1d815fccee1f4766a7e56054ab0ec3f6f3a7db Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 7 Jan 2006 14:54:15 +0000 Subject: [PATCH 34/36] [ARM] Move AMBA bus code to drivers/amba/ Make the AMBA bus code visible to other architectures. Signed-off-by: Russell King --- arch/arm/common/Makefile | 1 - drivers/Makefile | 1 + drivers/amba/Makefile | 2 ++ arch/arm/common/amba.c => drivers/amba/bus.c | 0 4 files changed, 3 insertions(+), 1 deletion(-) create mode 100644 drivers/amba/Makefile rename arch/arm/common/amba.c => drivers/amba/bus.c (100%) diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 2685051b3013..ec8d17c96906 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -3,7 +3,6 @@ # obj-y += rtctime.o -obj-$(CONFIG_ARM_AMBA) += amba.o obj-$(CONFIG_ARM_GIC) += gic.o obj-$(CONFIG_ICST525) += icst525.o obj-$(CONFIG_ICST307) += icst307.o diff --git a/drivers/Makefile b/drivers/Makefile index ea410b6b7644..7fc3f0f08b29 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_ACPI) += acpi/ # PnP must come after ACPI since it will eventually need to check if acpi # was used and do nothing if so obj-$(CONFIG_PNP) += pnp/ +obj-$(CONFIG_ARM_AMBA) += amba/ # char/ comes before serial/ etc so that the VT console is the boot-time # default. diff --git a/drivers/amba/Makefile b/drivers/amba/Makefile new file mode 100644 index 000000000000..40fe74097be2 --- /dev/null +++ b/drivers/amba/Makefile @@ -0,0 +1,2 @@ +obj-y += bus.o + diff --git a/arch/arm/common/amba.c b/drivers/amba/bus.c similarity index 100% rename from arch/arm/common/amba.c rename to drivers/amba/bus.c From f8ce25476d5f12ffa29b885e49c38cd95053437e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 7 Jan 2006 16:15:52 +0000 Subject: [PATCH 35/36] [ARM] Move asm/hardware/clock.h to linux/clk.h This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King --- arch/arm/mach-aaec2000/clock.c | 2 +- arch/arm/mach-integrator/clock.c | 2 +- arch/arm/mach-omap1/board-palmte.c | 2 +- arch/arm/mach-omap1/clock.c | 2 +- arch/arm/mach-omap1/serial.c | 2 +- arch/arm/mach-omap2/clock.c | 2 +- arch/arm/mach-omap2/serial.c | 2 +- arch/arm/mach-omap2/timer-gp.c | 3 ++- arch/arm/mach-realview/clock.c | 2 +- arch/arm/mach-s3c2410/clock.c | 3 +-- arch/arm/mach-s3c2410/s3c2440-clock.c | 3 +-- arch/arm/mach-s3c2410/s3c2440.c | 2 +- arch/arm/mach-s3c2410/time.c | 2 +- arch/arm/mach-versatile/clock.c | 2 +- arch/arm/plat-omap/clock.c | 2 +- arch/arm/plat-omap/common.c | 2 +- arch/arm/plat-omap/cpu-omap.c | 3 +-- arch/arm/plat-omap/gpio.c | 2 +- arch/arm/plat-omap/mcbsp.c | 3 +-- arch/arm/plat-omap/ocpi.c | 2 +- drivers/char/s3c2410-rtc.c | 2 +- drivers/char/watchdog/s3c2410_wdt.c | 2 +- drivers/i2c/busses/i2c-s3c2410.c | 2 +- drivers/input/serio/ambakmi.c | 2 +- drivers/mmc/mmci.c | 2 +- drivers/mtd/nand/s3c2410.c | 2 +- drivers/serial/amba-pl011.c | 2 +- drivers/serial/s3c2410.c | 2 +- drivers/usb/host/ohci-omap.c | 2 +- drivers/usb/host/ohci-s3c2410.c | 2 +- drivers/video/amba-clcd.c | 2 +- drivers/video/s3c2410fb.c | 2 +- include/asm-arm/arch-omap/system.h | 3 ++- include/{asm-arm/hardware/clock.h => linux/clk.h} | 2 +- 34 files changed, 36 insertions(+), 38 deletions(-) rename include/{asm-arm/hardware/clock.h => linux/clk.h} (98%) diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c index 828208348b76..1c84c60941e1 100644 --- a/arch/arm/mach-aaec2000/clock.c +++ b/arch/arm/mach-aaec2000/clock.c @@ -15,9 +15,9 @@ #include #include #include +#include #include -#include #include "clock.h" diff --git a/arch/arm/mach-integrator/clock.c b/arch/arm/mach-integrator/clock.c index bbfe46cd91fe..40684e01e865 100644 --- a/arch/arm/mach-integrator/clock.c +++ b/arch/arm/mach-integrator/clock.c @@ -14,9 +14,9 @@ #include #include #include +#include #include -#include #include #include "clock.h" diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 540b20d78cca..5c975eb5c34b 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -30,7 +31,6 @@ #include #include #include -#include static void __init omap_generic_init_irq(void) { diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 4277eee44ed5..9d862f86bba6 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -16,9 +16,9 @@ #include #include #include +#include #include -#include #include #include diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 6810cfb84462..fcfb81d13cfe 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -17,10 +17,10 @@ #include #include #include +#include #include #include -#include #include #include diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 85818d9f2635..5407b9549150 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -22,10 +22,10 @@ #include #include #include +#include #include -#include #include #include #include diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index f4df04fe1dd8..e1bd46a96e11 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -16,9 +16,9 @@ #include #include #include +#include #include -#include #include #include diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 9ec11443200f..23d36b1c40fe 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -21,10 +21,11 @@ #include #include #include +#include + #include #include #include -#include #define OMAP2_GP_TIMER1_BASE 0x48028000 #define OMAP2_GP_TIMER2_BASE 0x4802a000 diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c index 331e1b483aa7..ec3f7e798623 100644 --- a/arch/arm/mach-realview/clock.c +++ b/arch/arm/mach-realview/clock.c @@ -13,9 +13,9 @@ #include #include #include +#include #include -#include #include #include "clock.h" diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index 77f321fac281..5830ae3ddd19 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -34,16 +34,15 @@ #include #include #include - #include #include +#include #include #include #include #include -#include #include #include "clock.h" diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c index c67e0979aec3..b557a2be8a01 100644 --- a/arch/arm/mach-s3c2410/s3c2440-clock.c +++ b/arch/arm/mach-s3c2410/s3c2440-clock.c @@ -29,16 +29,15 @@ #include #include #include - #include #include +#include #include #include #include #include -#include #include #include "clock.h" diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2410/s3c2440.c index 4d63e7133b48..b7fe6d9453fb 100644 --- a/arch/arm/mach-s3c2410/s3c2440.c +++ b/arch/arm/mach-s3c2410/s3c2440.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -36,7 +37,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c index 9acda44b25a6..10a2976aefdd 100644 --- a/arch/arm/mach-s3c2410/time.c +++ b/arch/arm/mach-s3c2410/time.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -35,7 +36,6 @@ #include #include #include -#include #include "clock.h" #include "cpu.h" diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c index ada3142da8dc..dcf10014f5cd 100644 --- a/arch/arm/mach-versatile/clock.c +++ b/arch/arm/mach-versatile/clock.c @@ -14,9 +14,9 @@ #include #include #include +#include #include -#include #include #include "clock.h" diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 7ce39b986e23..84fd65656fcf 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -19,10 +19,10 @@ #include #include #include +#include #include #include -#include #include diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index ccdb452630cf..adffc5a859ee 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -18,12 +18,12 @@ #include #include #include +#include #include #include #include #include -#include #include #include diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index fd894bb00107..98edc9fdd6d1 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -19,13 +19,12 @@ #include #include #include +#include #include #include #include -#include - /* TODO: Add support for SDRAM timing changes */ int omap_verify_speed(struct cpufreq_policy *policy) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 76f721d85137..ca3681a824ac 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -19,9 +19,9 @@ #include #include #include +#include #include -#include #include #include #include diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index ea9475c86656..be0e0f32a598 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -30,8 +31,6 @@ #include #include -#include - #ifdef CONFIG_MCBSP_DEBUG #define DBG(x...) printk(x) #else diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c index b86148227480..e40fcc8b43d4 100644 --- a/arch/arm/plat-omap/ocpi.c +++ b/arch/arm/plat-omap/ocpi.c @@ -31,9 +31,9 @@ #include #include #include +#include #include -#include #include #define OCPI_BASE 0xfffec320 diff --git a/drivers/char/s3c2410-rtc.c b/drivers/char/s3c2410-rtc.c index 3df7a574267b..2e308657f6f6 100644 --- a/drivers/char/s3c2410-rtc.c +++ b/drivers/char/s3c2410-rtc.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -33,7 +34,6 @@ #include -#include #include /* need this for the RTC_AF definitions */ diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c index 621e8a99e733..9dc54736e4eb 100644 --- a/drivers/char/watchdog/s3c2410_wdt.c +++ b/drivers/char/watchdog/s3c2410_wdt.c @@ -46,12 +46,12 @@ #include #include #include +#include #include #include #include -#include #undef S3C24XX_VA_WATCHDOG #define S3C24XX_VA_WATCHDOG (0) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 2a2f86d8c2d8..f7d40f8e5f5c 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -34,12 +34,12 @@ #include #include #include +#include #include #include #include -#include #include #include #include diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c index cbab5d26377b..3df5eedf8f31 100644 --- a/drivers/input/serio/ambakmi.c +++ b/drivers/input/serio/ambakmi.c @@ -21,10 +21,10 @@ #include #include #include +#include #include #include -#include #define KMI_BASE (kmi->base) diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c index 57375bc12372..a0cd916ab792 100644 --- a/drivers/mmc/mmci.c +++ b/drivers/mmc/mmci.c @@ -20,12 +20,12 @@ #include #include #include +#include #include #include #include #include -#include #include #include "mmci.h" diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index b796a9a6b924..5b55599739f3 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -53,6 +53,7 @@ #include #include #include +#include #include #include @@ -60,7 +61,6 @@ #include #include -#include #include #include diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 4ae4dff59795..129670556162 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -49,10 +49,10 @@ #include #include #include +#include #include #include -#include #define UART_NR 14 diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index eb47f5b71aeb..fe83ce6fef52 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -72,12 +72,12 @@ #include #include #include +#include #include #include #include -#include #include #include diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index c9e29d808711..3785b3f7df1b 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -17,6 +17,7 @@ #include /* SA_INTERRUPT */ #include #include +#include #include #include @@ -27,7 +28,6 @@ #include #include #include -#include /* OMAP-1510 OHCI has its own MMU for DMA */ diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index add198a4be79..372527a83593 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -20,9 +20,9 @@ */ #include +#include #include -#include #include #define valid_port(idx) ((idx) == 1 || (idx) == 2) diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 3358a1429651..0da4083ba908 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -23,9 +23,9 @@ #include #include #include +#include #include -#include #define to_clcd(info) container_of(info, struct clcd_fb, fb) diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index d9c08cc7ac44..fe99d17a21d7 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -87,6 +87,7 @@ #include #include #include +#include #include #include @@ -96,7 +97,6 @@ #include #include #include -#include #ifdef CONFIG_PM #include diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h index 9af415d2944a..6724a81bd10b 100644 --- a/include/asm-arm/arch-omap/system.h +++ b/include/asm-arm/arch-omap/system.h @@ -5,8 +5,9 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H #include +#include + #include -#include #include #include diff --git a/include/asm-arm/hardware/clock.h b/include/linux/clk.h similarity index 98% rename from include/asm-arm/hardware/clock.h rename to include/linux/clk.h index 69f33215e437..12848f81bb37 100644 --- a/include/asm-arm/hardware/clock.h +++ b/include/linux/clk.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/clock.h + * linux/include/linux/clk.h * * Copyright (C) 2004 ARM Limited. * Written by Deep Blue Solutions Limited. From fe5dd7c73d328b255286b6b65ca19dd34447f709 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 7 Jan 2006 16:55:50 +0000 Subject: [PATCH 36/36] [ARM] byteorder.h needs linux/compiler.h Signed-off-by: Russell King --- include/asm-arm/byteorder.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-arm/byteorder.h b/include/asm-arm/byteorder.h index af42f449b9a6..741f5bc5d016 100644 --- a/include/asm-arm/byteorder.h +++ b/include/asm-arm/byteorder.h @@ -15,6 +15,7 @@ #ifndef __ASM_ARM_BYTEORDER_H #define __ASM_ARM_BYTEORDER_H +#include #include static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)