iio: imu: Add support for the FXOS8700 IMU

FXOS8700CQ is a small, low-power, 3-axis linear accelerometer and 3-axis
magnetometer combined into a single package. The device features a
selectable I2C or point-to-point SPI serial interface with 14-bit
accelerometer and 16-bit magnetometer ADC resolution along with
smart-embedded functions.

FXOS8700CQ has dynamically selectable accelerationfull-scale ranges of
±2 g/±4 g/±8 g and a fixed magnetic measurement range of ±1200 μT.
Output data rates (ODR) from 1.563 Hz to 800 Hz are selectable by the user
for each sensor. Interleaved magnetic and acceleration data is available
at ODR rates of up to 400 Hz. FXOS8700CQ is available in a plastic QFN
package and it is guaranteed to operate over the extended temperature
range of –40 °C to +85 °C.

TODO: Trigger and IRQ configuration support

Datasheet:
  http://cache.freescale.com/files/sensors/doc/data_sheet/FXOS8700CQ.pdf

Signed-off-by: Robert Jones <rjones@gateworks.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
Robert Jones 2019-10-14 11:49:21 -07:00 committed by Jonathan Cameron
parent 4d6f93964d
commit 84e5ddd5c4
6 changed files with 821 additions and 0 deletions

View File

@ -40,6 +40,33 @@ config ADIS16480
source "drivers/iio/imu/bmi160/Kconfig"
config FXOS8700
tristate
config FXOS8700_I2C
tristate "NXP FXOS8700 I2C driver"
depends on I2C
select FXOS8700
select REGMAP_I2C
help
Say yes here to build support for the NXP FXOS8700 m+g combo
sensor on I2C.
This driver can also be built as a module. If so, the module will be
called fxos8700_i2c.
config FXOS8700_SPI
tristate "NXP FXOS8700 SPI driver"
depends on SPI
select FXOS8700
select REGMAP_SPI
help
Say yes here to build support for the NXP FXOS8700 m+g combo
sensor on SPI.
This driver can also be built as a module. If so, the module will be
called fxos8700_spi.
config KMX61
tristate "Kionix KMX61 6-axis accelerometer and magnetometer"
depends on I2C

View File

@ -14,6 +14,11 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o
obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o
obj-y += bmi160/
obj-$(CONFIG_FXOS8700) += fxos8700_core.o
obj-$(CONFIG_FXOS8700_I2C) += fxos8700_i2c.o
obj-$(CONFIG_FXOS8700_SPI) += fxos8700_spi.o
obj-y += inv_mpu6050/
obj-$(CONFIG_KMX61) += kmx61.o

View File

@ -0,0 +1,10 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef FXOS8700_H_
#define FXOS8700_H_
extern const struct regmap_config fxos8700_regmap_config;
int fxos8700_core_probe(struct device *dev, struct regmap *regmap,
const char *name, bool use_spi);
#endif /* FXOS8700_H_ */

View File

@ -0,0 +1,649 @@
// SPDX-License-Identifier: GPL-2.0
/*
* FXOS8700 - NXP IMU (accelerometer plus magnetometer)
*
* IIO core driver for FXOS8700, with support for I2C/SPI busses
*
* TODO: Buffer, trigger, and IRQ support
*/
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/acpi.h>
#include <linux/bitops.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include "fxos8700.h"
/* Register Definitions */
#define FXOS8700_STATUS 0x00
#define FXOS8700_OUT_X_MSB 0x01
#define FXOS8700_OUT_X_LSB 0x02
#define FXOS8700_OUT_Y_MSB 0x03
#define FXOS8700_OUT_Y_LSB 0x04
#define FXOS8700_OUT_Z_MSB 0x05
#define FXOS8700_OUT_Z_LSB 0x06
#define FXOS8700_F_SETUP 0x09
#define FXOS8700_TRIG_CFG 0x0a
#define FXOS8700_SYSMOD 0x0b
#define FXOS8700_INT_SOURCE 0x0c
#define FXOS8700_WHO_AM_I 0x0d
#define FXOS8700_XYZ_DATA_CFG 0x0e
#define FXOS8700_HP_FILTER_CUTOFF 0x0f
#define FXOS8700_PL_STATUS 0x10
#define FXOS8700_PL_CFG 0x11
#define FXOS8700_PL_COUNT 0x12
#define FXOS8700_PL_BF_ZCOMP 0x13
#define FXOS8700_PL_THS_REG 0x14
#define FXOS8700_A_FFMT_CFG 0x15
#define FXOS8700_A_FFMT_SRC 0x16
#define FXOS8700_A_FFMT_THS 0x17
#define FXOS8700_A_FFMT_COUNT 0x18
#define FXOS8700_TRANSIENT_CFG 0x1d
#define FXOS8700_TRANSIENT_SRC 0x1e
#define FXOS8700_TRANSIENT_THS 0x1f
#define FXOS8700_TRANSIENT_COUNT 0x20
#define FXOS8700_PULSE_CFG 0x21
#define FXOS8700_PULSE_SRC 0x22
#define FXOS8700_PULSE_THSX 0x23
#define FXOS8700_PULSE_THSY 0x24
#define FXOS8700_PULSE_THSZ 0x25
#define FXOS8700_PULSE_TMLT 0x26
#define FXOS8700_PULSE_LTCY 0x27
#define FXOS8700_PULSE_WIND 0x28
#define FXOS8700_ASLP_COUNT 0x29
#define FXOS8700_CTRL_REG1 0x2a
#define FXOS8700_CTRL_REG2 0x2b
#define FXOS8700_CTRL_REG3 0x2c
#define FXOS8700_CTRL_REG4 0x2d
#define FXOS8700_CTRL_REG5 0x2e
#define FXOS8700_OFF_X 0x2f
#define FXOS8700_OFF_Y 0x30
#define FXOS8700_OFF_Z 0x31
#define FXOS8700_M_DR_STATUS 0x32
#define FXOS8700_M_OUT_X_MSB 0x33
#define FXOS8700_M_OUT_X_LSB 0x34
#define FXOS8700_M_OUT_Y_MSB 0x35
#define FXOS8700_M_OUT_Y_LSB 0x36
#define FXOS8700_M_OUT_Z_MSB 0x37
#define FXOS8700_M_OUT_Z_LSB 0x38
#define FXOS8700_CMP_X_MSB 0x39
#define FXOS8700_CMP_X_LSB 0x3a
#define FXOS8700_CMP_Y_MSB 0x3b
#define FXOS8700_CMP_Y_LSB 0x3c
#define FXOS8700_CMP_Z_MSB 0x3d
#define FXOS8700_CMP_Z_LSB 0x3e
#define FXOS8700_M_OFF_X_MSB 0x3f
#define FXOS8700_M_OFF_X_LSB 0x40
#define FXOS8700_M_OFF_Y_MSB 0x41
#define FXOS8700_M_OFF_Y_LSB 0x42
#define FXOS8700_M_OFF_Z_MSB 0x43
#define FXOS8700_M_OFF_Z_LSB 0x44
#define FXOS8700_MAX_X_MSB 0x45
#define FXOS8700_MAX_X_LSB 0x46
#define FXOS8700_MAX_Y_MSB 0x47
#define FXOS8700_MAX_Y_LSB 0x48
#define FXOS8700_MAX_Z_MSB 0x49
#define FXOS8700_MAX_Z_LSB 0x4a
#define FXOS8700_MIN_X_MSB 0x4b
#define FXOS8700_MIN_X_LSB 0x4c
#define FXOS8700_MIN_Y_MSB 0x4d
#define FXOS8700_MIN_Y_LSB 0x4e
#define FXOS8700_MIN_Z_MSB 0x4f
#define FXOS8700_MIN_Z_LSB 0x50
#define FXOS8700_TEMP 0x51
#define FXOS8700_M_THS_CFG 0x52
#define FXOS8700_M_THS_SRC 0x53
#define FXOS8700_M_THS_X_MSB 0x54
#define FXOS8700_M_THS_X_LSB 0x55
#define FXOS8700_M_THS_Y_MSB 0x56
#define FXOS8700_M_THS_Y_LSB 0x57
#define FXOS8700_M_THS_Z_MSB 0x58
#define FXOS8700_M_THS_Z_LSB 0x59
#define FXOS8700_M_THS_COUNT 0x5a
#define FXOS8700_M_CTRL_REG1 0x5b
#define FXOS8700_M_CTRL_REG2 0x5c
#define FXOS8700_M_CTRL_REG3 0x5d
#define FXOS8700_M_INT_SRC 0x5e
#define FXOS8700_A_VECM_CFG 0x5f
#define FXOS8700_A_VECM_THS_MSB 0x60
#define FXOS8700_A_VECM_THS_LSB 0x61
#define FXOS8700_A_VECM_CNT 0x62
#define FXOS8700_A_VECM_INITX_MSB 0x63
#define FXOS8700_A_VECM_INITX_LSB 0x64
#define FXOS8700_A_VECM_INITY_MSB 0x65
#define FXOS8700_A_VECM_INITY_LSB 0x66
#define FXOS8700_A_VECM_INITZ_MSB 0x67
#define FXOS8700_A_VECM_INITZ_LSB 0x68
#define FXOS8700_M_VECM_CFG 0x69
#define FXOS8700_M_VECM_THS_MSB 0x6a
#define FXOS8700_M_VECM_THS_LSB 0x6b
#define FXOS8700_M_VECM_CNT 0x6c
#define FXOS8700_M_VECM_INITX_MSB 0x6d
#define FXOS8700_M_VECM_INITX_LSB 0x6e
#define FXOS8700_M_VECM_INITY_MSB 0x6f
#define FXOS8700_M_VECM_INITY_LSB 0x70
#define FXOS8700_M_VECM_INITZ_MSB 0x71
#define FXOS8700_M_VECM_INITZ_LSB 0x72
#define FXOS8700_A_FFMT_THS_X_MSB 0x73
#define FXOS8700_A_FFMT_THS_X_LSB 0x74
#define FXOS8700_A_FFMT_THS_Y_MSB 0x75
#define FXOS8700_A_FFMT_THS_Y_LSB 0x76
#define FXOS8700_A_FFMT_THS_Z_MSB 0x77
#define FXOS8700_A_FFMT_THS_Z_LSB 0x78
#define FXOS8700_A_TRAN_INIT_MSB 0x79
#define FXOS8700_A_TRAN_INIT_LSB_X 0x7a
#define FXOS8700_A_TRAN_INIT_LSB_Y 0x7b
#define FXOS8700_A_TRAN_INIT_LSB_Z 0x7d
#define FXOS8700_TM_NVM_LOCK 0x7e
#define FXOS8700_NVM_DATA0_35 0x80
#define FXOS8700_NVM_DATA_BNK3 0xa4
#define FXOS8700_NVM_DATA_BNK2 0xa5
#define FXOS8700_NVM_DATA_BNK1 0xa6
#define FXOS8700_NVM_DATA_BNK0 0xa7
/* Bit definitions for FXOS8700_CTRL_REG1 */
#define FXOS8700_CTRL_ODR_MSK 0x38
#define FXOS8700_CTRL_ODR_MAX 0x00
#define FXOS8700_CTRL_ODR_MIN GENMASK(4, 3)
/* Bit definitions for FXOS8700_M_CTRL_REG1 */
#define FXOS8700_HMS_MASK GENMASK(1, 0)
#define FXOS8700_OS_MASK GENMASK(4, 2)
/* Bit definitions for FXOS8700_M_CTRL_REG2 */
#define FXOS8700_MAXMIN_RST BIT(2)
#define FXOS8700_MAXMIN_DIS_THS BIT(3)
#define FXOS8700_MAXMIN_DIS BIT(4)
#define FXOS8700_ACTIVE 0x01
#define FXOS8700_ACTIVE_MIN_USLEEP 4000 /* from table 6 in datasheet */
#define FXOS8700_DEVICE_ID 0xC7
#define FXOS8700_PRE_DEVICE_ID 0xC4
#define FXOS8700_DATA_BUF_SIZE 3
struct fxos8700_data {
struct regmap *regmap;
struct iio_trigger *trig;
__be16 buf[FXOS8700_DATA_BUF_SIZE] ____cacheline_aligned;
};
/* Regmap info */
static const struct regmap_range read_range[] = {
{
.range_min = FXOS8700_STATUS,
.range_max = FXOS8700_A_FFMT_COUNT,
}, {
.range_min = FXOS8700_TRANSIENT_CFG,
.range_max = FXOS8700_A_FFMT_THS_Z_LSB,
},
};
static const struct regmap_range write_range[] = {
{
.range_min = FXOS8700_F_SETUP,
.range_max = FXOS8700_TRIG_CFG,
}, {
.range_min = FXOS8700_XYZ_DATA_CFG,
.range_max = FXOS8700_HP_FILTER_CUTOFF,
}, {
.range_min = FXOS8700_PL_CFG,
.range_max = FXOS8700_A_FFMT_CFG,
}, {
.range_min = FXOS8700_A_FFMT_THS,
.range_max = FXOS8700_TRANSIENT_CFG,
}, {
.range_min = FXOS8700_TRANSIENT_THS,
.range_max = FXOS8700_PULSE_CFG,
}, {
.range_min = FXOS8700_PULSE_THSX,
.range_max = FXOS8700_OFF_Z,
}, {
.range_min = FXOS8700_M_OFF_X_MSB,
.range_max = FXOS8700_M_OFF_Z_LSB,
}, {
.range_min = FXOS8700_M_THS_CFG,
.range_max = FXOS8700_M_THS_CFG,
}, {
.range_min = FXOS8700_M_THS_X_MSB,
.range_max = FXOS8700_M_CTRL_REG3,
}, {
.range_min = FXOS8700_A_VECM_CFG,
.range_max = FXOS8700_A_FFMT_THS_Z_LSB,
},
};
static const struct regmap_access_table driver_read_table = {
.yes_ranges = read_range,
.n_yes_ranges = ARRAY_SIZE(read_range),
};
static const struct regmap_access_table driver_write_table = {
.yes_ranges = write_range,
.n_yes_ranges = ARRAY_SIZE(write_range),
};
const struct regmap_config fxos8700_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = FXOS8700_NVM_DATA_BNK0,
.rd_table = &driver_read_table,
.wr_table = &driver_write_table,
};
EXPORT_SYMBOL(fxos8700_regmap_config);
#define FXOS8700_CHANNEL(_type, _axis) { \
.type = _type, \
.modified = 1, \
.channel2 = IIO_MOD_##_axis, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
}
enum fxos8700_accel_scale_bits {
MODE_2G = 0,
MODE_4G,
MODE_8G,
};
/* scan indexes follow DATA register order */
enum fxos8700_scan_axis {
FXOS8700_SCAN_ACCEL_X = 0,
FXOS8700_SCAN_ACCEL_Y,
FXOS8700_SCAN_ACCEL_Z,
FXOS8700_SCAN_MAGN_X,
FXOS8700_SCAN_MAGN_Y,
FXOS8700_SCAN_MAGN_Z,
FXOS8700_SCAN_RHALL,
FXOS8700_SCAN_TIMESTAMP,
};
enum fxos8700_sensor {
FXOS8700_ACCEL = 0,
FXOS8700_MAGN,
FXOS8700_NUM_SENSORS /* must be last */
};
enum fxos8700_int_pin {
FXOS8700_PIN_INT1,
FXOS8700_PIN_INT2
};
struct fxos8700_scale {
u8 bits;
int uscale;
};
struct fxos8700_odr {
u8 bits;
int odr;
int uodr;
};
static const struct fxos8700_scale fxos8700_accel_scale[] = {
{ MODE_2G, 244},
{ MODE_4G, 488},
{ MODE_8G, 976},
};
/*
* Accellerometer and magnetometer have the same ODR options, set in the
* CTRL_REG1 register. ODR is halved when using both sensors at once in
* hybrid mode.
*/
static const struct fxos8700_odr fxos8700_odr[] = {
{0x00, 800, 0},
{0x01, 400, 0},
{0x02, 200, 0},
{0x03, 100, 0},
{0x04, 50, 0},
{0x05, 12, 500000},
{0x06, 6, 250000},
{0x07, 1, 562500},
};
static const struct iio_chan_spec fxos8700_channels[] = {
FXOS8700_CHANNEL(IIO_ACCEL, X),
FXOS8700_CHANNEL(IIO_ACCEL, Y),
FXOS8700_CHANNEL(IIO_ACCEL, Z),
FXOS8700_CHANNEL(IIO_MAGN, X),
FXOS8700_CHANNEL(IIO_MAGN, Y),
FXOS8700_CHANNEL(IIO_MAGN, Z),
IIO_CHAN_SOFT_TIMESTAMP(FXOS8700_SCAN_TIMESTAMP),
};
static enum fxos8700_sensor fxos8700_to_sensor(enum iio_chan_type iio_type)
{
switch (iio_type) {
case IIO_ACCEL:
return FXOS8700_ACCEL;
case IIO_ANGL_VEL:
return FXOS8700_MAGN;
default:
return -EINVAL;
}
}
static int fxos8700_set_active_mode(struct fxos8700_data *data,
enum fxos8700_sensor t, bool mode)
{
int ret;
ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1, mode);
if (ret)
return ret;
usleep_range(FXOS8700_ACTIVE_MIN_USLEEP,
FXOS8700_ACTIVE_MIN_USLEEP + 1000);
return 0;
}
static int fxos8700_set_scale(struct fxos8700_data *data,
enum fxos8700_sensor t, int uscale)
{
int i;
static const int scale_num = ARRAY_SIZE(fxos8700_accel_scale);
struct device *dev = regmap_get_device(data->regmap);
if (t == FXOS8700_MAGN) {
dev_err(dev, "Magnetometer scale is locked at 1200uT\n");
return -EINVAL;
}
for (i = 0; i < scale_num; i++)
if (fxos8700_accel_scale[i].uscale == uscale)
break;
if (i == scale_num)
return -EINVAL;
return regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG,
fxos8700_accel_scale[i].bits);
}
static int fxos8700_get_scale(struct fxos8700_data *data,
enum fxos8700_sensor t, int *uscale)
{
int i, ret, val;
static const int scale_num = ARRAY_SIZE(fxos8700_accel_scale);
if (t == FXOS8700_MAGN) {
*uscale = 1200; /* Magnetometer is locked at 1200uT */
return 0;
}
ret = regmap_read(data->regmap, FXOS8700_XYZ_DATA_CFG, &val);
if (ret)
return ret;
for (i = 0; i < scale_num; i++) {
if (fxos8700_accel_scale[i].bits == (val & 0x3)) {
*uscale = fxos8700_accel_scale[i].uscale;
return 0;
}
}
return -EINVAL;
}
static int fxos8700_get_data(struct fxos8700_data *data, int chan_type,
int axis, int *val)
{
u8 base, reg;
int ret;
enum fxos8700_sensor type = fxos8700_to_sensor(chan_type);
base = type ? FXOS8700_OUT_X_MSB : FXOS8700_M_OUT_X_MSB;
/* Block read 6 bytes of device output registers to avoid data loss */
ret = regmap_bulk_read(data->regmap, base, data->buf,
FXOS8700_DATA_BUF_SIZE);
if (ret)
return ret;
/* Convert axis to buffer index */
reg = axis - IIO_MOD_X;
/* Convert to native endianness */
*val = sign_extend32(be16_to_cpu(data->buf[reg]), 15);
return 0;
}
static int fxos8700_set_odr(struct fxos8700_data *data, enum fxos8700_sensor t,
int odr, int uodr)
{
int i, ret, val;
bool active_mode;
static const int odr_num = ARRAY_SIZE(fxos8700_odr);
ret = regmap_read(data->regmap, FXOS8700_CTRL_REG1, &val);
if (ret)
return ret;
active_mode = val & FXOS8700_ACTIVE;
if (active_mode) {
/*
* The device must be in standby mode to change any of the
* other fields within CTRL_REG1
*/
ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1,
val & ~FXOS8700_ACTIVE);
if (ret)
return ret;
}
for (i = 0; i < odr_num; i++)
if (fxos8700_odr[i].odr == odr && fxos8700_odr[i].uodr == uodr)
break;
if (i >= odr_num)
return -EINVAL;
return regmap_update_bits(data->regmap,
FXOS8700_CTRL_REG1,
FXOS8700_CTRL_ODR_MSK + FXOS8700_ACTIVE,
fxos8700_odr[i].bits << 3 | active_mode);
}
static int fxos8700_get_odr(struct fxos8700_data *data, enum fxos8700_sensor t,
int *odr, int *uodr)
{
int i, val, ret;
static const int odr_num = ARRAY_SIZE(fxos8700_odr);
ret = regmap_read(data->regmap, FXOS8700_CTRL_REG1, &val);
if (ret)
return ret;
val &= FXOS8700_CTRL_ODR_MSK;
for (i = 0; i < odr_num; i++)
if (val == fxos8700_odr[i].bits)
break;
if (i >= odr_num)
return -EINVAL;
*odr = fxos8700_odr[i].odr;
*uodr = fxos8700_odr[i].uodr;
return 0;
}
static int fxos8700_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
int ret;
struct fxos8700_data *data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = fxos8700_get_data(data, chan->type, chan->channel2, val);
if (ret)
return ret;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 0;
ret = fxos8700_get_scale(data, fxos8700_to_sensor(chan->type),
val2);
return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_SAMP_FREQ:
ret = fxos8700_get_odr(data, fxos8700_to_sensor(chan->type),
val, val2);
return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
}
static int fxos8700_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct fxos8700_data *data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_SCALE:
return fxos8700_set_scale(data, fxos8700_to_sensor(chan->type),
val2);
case IIO_CHAN_INFO_SAMP_FREQ:
return fxos8700_set_odr(data, fxos8700_to_sensor(chan->type),
val, val2);
default:
return -EINVAL;
}
}
static IIO_CONST_ATTR(in_accel_sampling_frequency_available,
"1.5625 6.25 12.5 50 100 200 400 800");
static IIO_CONST_ATTR(in_magn_sampling_frequency_available,
"1.5625 6.25 12.5 50 100 200 400 800");
static IIO_CONST_ATTR(in_accel_scale_available, "0.000244 0.000488 0.000976");
static IIO_CONST_ATTR(in_magn_scale_available, "0.000001200");
static struct attribute *fxos8700_attrs[] = {
&iio_const_attr_in_accel_sampling_frequency_available.dev_attr.attr,
&iio_const_attr_in_magn_sampling_frequency_available.dev_attr.attr,
&iio_const_attr_in_accel_scale_available.dev_attr.attr,
&iio_const_attr_in_magn_scale_available.dev_attr.attr,
NULL,
};
static const struct attribute_group fxos8700_attrs_group = {
.attrs = fxos8700_attrs,
};
static const struct iio_info fxos8700_info = {
.read_raw = fxos8700_read_raw,
.write_raw = fxos8700_write_raw,
.attrs = &fxos8700_attrs_group,
};
static int fxos8700_chip_init(struct fxos8700_data *data, bool use_spi)
{
int ret;
unsigned int val;
struct device *dev = regmap_get_device(data->regmap);
ret = regmap_read(data->regmap, FXOS8700_WHO_AM_I, &val);
if (ret) {
dev_err(dev, "Error reading chip id\n");
return ret;
}
if (val != FXOS8700_DEVICE_ID && val != FXOS8700_PRE_DEVICE_ID) {
dev_err(dev, "Wrong chip id, got %x expected %x or %x\n",
val, FXOS8700_DEVICE_ID, FXOS8700_PRE_DEVICE_ID);
return -ENODEV;
}
ret = fxos8700_set_active_mode(data, FXOS8700_ACCEL, true);
if (ret)
return ret;
ret = fxos8700_set_active_mode(data, FXOS8700_MAGN, true);
if (ret)
return ret;
/*
* The device must be in standby mode to change any of the other fields
* within CTRL_REG1
*/
ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1, 0x00);
if (ret)
return ret;
/* Set max oversample ratio (OSR) and both devices active */
ret = regmap_write(data->regmap, FXOS8700_M_CTRL_REG1,
FXOS8700_HMS_MASK | FXOS8700_OS_MASK);
if (ret)
return ret;
/* Disable and rst min/max measurements & threshold */
ret = regmap_write(data->regmap, FXOS8700_M_CTRL_REG2,
FXOS8700_MAXMIN_RST | FXOS8700_MAXMIN_DIS_THS |
FXOS8700_MAXMIN_DIS);
if (ret)
return ret;
/* Max ODR (800Hz individual or 400Hz hybrid), active mode */
ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1,
FXOS8700_CTRL_ODR_MAX | FXOS8700_ACTIVE);
if (ret)
return ret;
/* Set for max full-scale range (+/-8G) */
return regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG, MODE_8G);
}
static void fxos8700_chip_uninit(void *data)
{
struct fxos8700_data *fxos8700_data = data;
fxos8700_set_active_mode(fxos8700_data, FXOS8700_ACCEL, false);
fxos8700_set_active_mode(fxos8700_data, FXOS8700_MAGN, false);
}
int fxos8700_core_probe(struct device *dev, struct regmap *regmap,
const char *name, bool use_spi)
{
struct iio_dev *indio_dev;
struct fxos8700_data *data;
int ret;
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
dev_set_drvdata(dev, indio_dev);
data->regmap = regmap;
ret = fxos8700_chip_init(data, use_spi);
if (ret)
return ret;
ret = devm_add_action_or_reset(dev, fxos8700_chip_uninit, data);
if (ret)
return ret;
indio_dev->dev.parent = dev;
indio_dev->channels = fxos8700_channels;
indio_dev->num_channels = ARRAY_SIZE(fxos8700_channels);
indio_dev->name = name ? name : "fxos8700";
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &fxos8700_info;
return devm_iio_device_register(dev, indio_dev);
}
EXPORT_SYMBOL_GPL(fxos8700_core_probe);
MODULE_AUTHOR("Robert Jones <rjones@gateworks.com>");
MODULE_DESCRIPTION("FXOS8700 6-Axis Acc and Mag Combo Sensor driver");
MODULE_LICENSE("GPL v2");

View File

@ -0,0 +1,71 @@
// SPDX-License-Identifier: GPL-2.0
/*
* FXOS8700 - NXP IMU, I2C bits
*
* 7-bit I2C slave address determined by SA1 and SA0 logic level
* inputs represented in the following table:
* SA1 | SA0 | Slave Address
* 0 | 0 | 0x1E
* 0 | 1 | 0x1D
* 1 | 0 | 0x1C
* 1 | 1 | 0x1F
*/
#include <linux/acpi.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/regmap.h>
#include "fxos8700.h"
static int fxos8700_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct regmap *regmap;
const char *name = NULL;
regmap = devm_regmap_init_i2c(client, &fxos8700_regmap_config);
if (IS_ERR(regmap)) {
dev_err(&client->dev, "Failed to register i2c regmap %d\n",
(int)PTR_ERR(regmap));
return PTR_ERR(regmap);
}
if (id)
name = id->name;
return fxos8700_core_probe(&client->dev, regmap, name, false);
}
static const struct i2c_device_id fxos8700_i2c_id[] = {
{"fxos8700", 0},
{ }
};
MODULE_DEVICE_TABLE(i2c, fxos8700_i2c_id);
static const struct acpi_device_id fxos8700_acpi_match[] = {
{"FXOS8700", 0},
{ }
};
MODULE_DEVICE_TABLE(acpi, fxos8700_acpi_match);
static const struct of_device_id fxos8700_of_match[] = {
{ .compatible = "nxp,fxos8700" },
{ }
};
MODULE_DEVICE_TABLE(of, fxos8700_of_match);
static struct i2c_driver fxos8700_i2c_driver = {
.driver = {
.name = "fxos8700_i2c",
.acpi_match_table = ACPI_PTR(fxos8700_acpi_match),
.of_match_table = fxos8700_of_match,
},
.probe = fxos8700_i2c_probe,
.id_table = fxos8700_i2c_id,
};
module_i2c_driver(fxos8700_i2c_driver);
MODULE_AUTHOR("Robert Jones <rjones@gateworks.com>");
MODULE_DESCRIPTION("FXOS8700 I2C driver");
MODULE_LICENSE("GPL v2");

View File

@ -0,0 +1,59 @@
// SPDX-License-Identifier: GPL-2.0
/*
* FXOS8700 - NXP IMU, SPI bits
*/
#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>
#include "fxos8700.h"
static int fxos8700_spi_probe(struct spi_device *spi)
{
struct regmap *regmap;
const struct spi_device_id *id = spi_get_device_id(spi);
regmap = devm_regmap_init_spi(spi, &fxos8700_regmap_config);
if (IS_ERR(regmap)) {
dev_err(&spi->dev, "Failed to register spi regmap %d\n",
(int)PTR_ERR(regmap));
return PTR_ERR(regmap);
}
return fxos8700_core_probe(&spi->dev, regmap, id->name, true);
}
static const struct spi_device_id fxos8700_spi_id[] = {
{"fxos8700", 0},
{ }
};
MODULE_DEVICE_TABLE(spi, fxos8700_spi_id);
static const struct acpi_device_id fxos8700_acpi_match[] = {
{"FXOS8700", 0},
{ }
};
MODULE_DEVICE_TABLE(acpi, fxos8700_acpi_match);
static const struct of_device_id fxos8700_of_match[] = {
{ .compatible = "nxp,fxos8700" },
{ }
};
MODULE_DEVICE_TABLE(of, fxos8700_of_match);
static struct spi_driver fxos8700_spi_driver = {
.probe = fxos8700_spi_probe,
.id_table = fxos8700_spi_id,
.driver = {
.acpi_match_table = ACPI_PTR(fxos8700_acpi_match),
.of_match_table = fxos8700_of_match,
.name = "fxos8700_spi",
},
};
module_spi_driver(fxos8700_spi_driver);
MODULE_AUTHOR("Robert Jones <rjones@gateworks.com>");
MODULE_DESCRIPTION("FXOS8700 SPI driver");
MODULE_LICENSE("GPL v2");