i2c: stm32f7: support DT binding i2c-analog-filter

Replace driver internally coded enabling/disabling of the
analog-filter with the DT binding "i2c-analog-filter".

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This commit is contained in:
Alain Volmat 2021-02-05 09:51:41 +01:00 committed by Wolfram Sang
parent 1e28eed176
commit 83c3408f7b

View File

@ -164,7 +164,6 @@ enum {
#define STM32F7_I2C_DNF_DEFAULT 0
#define STM32F7_I2C_DNF_MAX 15
#define STM32F7_I2C_ANALOG_FILTER_ENABLE 1
#define STM32F7_I2C_ANALOG_FILTER_DELAY_MIN 50 /* ns */
#define STM32F7_I2C_ANALOG_FILTER_DELAY_MAX 260 /* ns */
@ -224,7 +223,6 @@ struct stm32f7_i2c_spec {
* @rise_time: Rise time (ns)
* @fall_time: Fall time (ns)
* @dnf: Digital filter coefficient (0-16)
* @analog_filter: Analog filter delay (On/Off)
* @fmp_clr_offset: Fast Mode Plus clear register offset from set register
*/
struct stm32f7_i2c_setup {
@ -233,7 +231,6 @@ struct stm32f7_i2c_setup {
u32 rise_time;
u32 fall_time;
u8 dnf;
bool analog_filter;
u32 fmp_clr_offset;
};
@ -312,6 +309,7 @@ struct stm32f7_i2c_msg {
* @wakeup_src: boolean to know if the device is a wakeup source
* @smbus_mode: states that the controller is configured in SMBus mode
* @host_notify_client: SMBus host-notify client
* @analog_filter: boolean to indicate enabling of the analog filter
*/
struct stm32f7_i2c_dev {
struct i2c_adapter adap;
@ -340,6 +338,7 @@ struct stm32f7_i2c_dev {
bool wakeup_src;
bool smbus_mode;
struct i2c_client *host_notify_client;
bool analog_filter;
};
/*
@ -386,14 +385,12 @@ static const struct stm32f7_i2c_setup stm32f7_setup = {
.rise_time = STM32F7_I2C_RISE_TIME_DEFAULT,
.fall_time = STM32F7_I2C_FALL_TIME_DEFAULT,
.dnf = STM32F7_I2C_DNF_DEFAULT,
.analog_filter = STM32F7_I2C_ANALOG_FILTER_ENABLE,
};
static const struct stm32f7_i2c_setup stm32mp15_setup = {
.rise_time = STM32F7_I2C_RISE_TIME_DEFAULT,
.fall_time = STM32F7_I2C_FALL_TIME_DEFAULT,
.dnf = STM32F7_I2C_DNF_DEFAULT,
.analog_filter = STM32F7_I2C_ANALOG_FILTER_ENABLE,
.fmp_clr_offset = 0x40,
};
@ -471,10 +468,10 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
/* Analog and Digital Filters */
af_delay_min =
(setup->analog_filter ?
(i2c_dev->analog_filter ?
STM32F7_I2C_ANALOG_FILTER_DELAY_MIN : 0);
af_delay_max =
(setup->analog_filter ?
(i2c_dev->analog_filter ?
STM32F7_I2C_ANALOG_FILTER_DELAY_MAX : 0);
dnf_delay = setup->dnf * i2cclk;
@ -676,12 +673,15 @@ static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
return ret;
}
i2c_dev->analog_filter = of_property_read_bool(i2c_dev->dev->of_node,
"i2c-analog-filter");
dev_dbg(i2c_dev->dev, "I2C Speed(%i), Clk Source(%i)\n",
setup->speed_freq, setup->clock_src);
dev_dbg(i2c_dev->dev, "I2C Rise(%i) and Fall(%i) Time\n",
setup->rise_time, setup->fall_time);
dev_dbg(i2c_dev->dev, "I2C Analog Filter(%s), DNF(%i)\n",
(setup->analog_filter ? "On" : "Off"), setup->dnf);
(i2c_dev->analog_filter ? "On" : "Off"), setup->dnf);
i2c_dev->bus_rate = setup->speed_freq;
@ -720,8 +720,8 @@ static void stm32f7_i2c_hw_config(struct stm32f7_i2c_dev *i2c_dev)
timing |= STM32F7_I2C_TIMINGR_SCLL(t->scll);
writel_relaxed(timing, i2c_dev->base + STM32F7_I2C_TIMINGR);
/* Enable I2C */
if (i2c_dev->setup.analog_filter)
/* Configure the Analog Filter */
if (i2c_dev->analog_filter)
stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1,
STM32F7_I2C_CR1_ANFOFF);
else