mirror of
https://github.com/torvalds/linux.git
synced 2024-12-11 13:41:55 +00:00
Merge remote-tracking branches 'regulator/topic/bulk', 'regulator/topic/dbx500', 'regulator/topic/hi6421', 'regulator/topic/load' and 'regulator/topic/ltc3676' into regulator-next
This commit is contained in:
Mark Brown
commit
81c383c9ba
94
Documentation/devicetree/bindings/regulator/ltc3676.txt
Normal file
94
Documentation/devicetree/bindings/regulator/ltc3676.txt
Normal file
@ -0,0 +1,94 @@
|
||||
Linear Technology LTC3676 8-output regulators
|
||||
|
||||
Required properties:
|
||||
- compatible: "lltc,ltc3676"
|
||||
- reg: I2C slave address
|
||||
|
||||
Required child node:
|
||||
- regulators: Contains eight regulator child nodes sw1, sw2, sw3, sw4,
|
||||
ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
|
||||
documented in Documentation/devicetree/bindings/regulator/regulator.txt.
|
||||
|
||||
Each regulator is defined using the standard binding for regulators. The
|
||||
nodes for sw1, sw2, sw3, sw4, ldo1, ldo2 and ldo4 additionally need to specify
|
||||
the resistor values of their external feedback voltage dividers:
|
||||
|
||||
Required properties (not on ldo3):
|
||||
- lltc,fb-voltage-divider: An array of two integers containing the resistor
|
||||
values R1 and R2 of the feedback voltage divider in ohms.
|
||||
|
||||
Regulators sw1, sw2, sw3, sw4 can regulate the feedback reference from:
|
||||
412.5mV to 800mV in 12.5 mV steps. The output voltage thus ranges between
|
||||
0.4125 * (1 + R1/R2) V and 0.8 * (1 + R1/R2) V.
|
||||
|
||||
Regulators ldo1, ldo2, and ldo4 have a fixed 0.725 V reference and thus output
|
||||
0.725 * (1 + R1/R2) V. The ldo3 regulator is fixed to 1.8 V. The ldo1 standby
|
||||
regulator can not be disabled and thus should have the regulator-always-on
|
||||
property set.
|
||||
|
||||
Example:
|
||||
|
||||
ltc3676: pmic@3c {
|
||||
compatible = "lltc,ltc3676";
|
||||
reg = <0x3c>;
|
||||
|
||||
regulators {
|
||||
sw1_reg: sw1 {
|
||||
regulator-min-microvolt = <674400>;
|
||||
regulator-max-microvolt = <1308000>;
|
||||
lltc,fb-voltage-divider = <127000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw2_reg: sw2 {
|
||||
regulator-min-microvolt = <1033310>;
|
||||
regulator-max-microvolt = <200400>;
|
||||
lltc,fb-voltage-divider = <301000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw3_reg: sw3 {
|
||||
regulator-min-microvolt = <674400>;
|
||||
regulator-max-microvolt = <130800>;
|
||||
lltc,fb-voltage-divider = <127000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw4_reg: sw4 {
|
||||
regulator-min-microvolt = <868310>;
|
||||
regulator-max-microvolt = <168400>;
|
||||
lltc,fb-voltage-divider = <221000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo2_reg: ldo2 {
|
||||
regulator-min-microvolt = <2490375>;
|
||||
regulator-max-microvolt = <2490375>;
|
||||
lltc,fb-voltage-divider = <487000 200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo3_reg: ldo3 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo4_reg: ldo4 {
|
||||
regulator-min-microvolt = <3023250>;
|
||||
regulator-max-microvolt = <3023250>;
|
||||
lltc,fb-voltage-divider = <634000 200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -353,6 +353,14 @@ config REGULATOR_LTC3589
|
||||
This enables support for the LTC3589, LTC3589-1, and LTC3589-2
|
||||
8-output regulators controlled via I2C.
|
||||
|
||||
config REGULATOR_LTC3676
|
||||
tristate "LTC3676 8-output voltage regulator"
|
||||
depends on I2C
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This enables support for the LTC3676
|
||||
8-output regulators controlled via I2C.
|
||||
|
||||
config REGULATOR_MAX14577
|
||||
tristate "Maxim 14577/77836 regulator"
|
||||
depends on MFD_MAX14577
|
||||
|
||||
@ -47,6 +47,7 @@ obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
|
||||
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
|
||||
obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
|
||||
obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
|
||||
obj-$(CONFIG_REGULATOR_LTC3676) += ltc3676.o
|
||||
obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
|
||||
obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
|
||||
|
||||
@ -679,6 +679,18 @@ static int drms_uA_update(struct regulator_dev *rdev)
|
||||
!rdev->desc->ops->set_load)
|
||||
return -EINVAL;
|
||||
|
||||
/* calc total requested load */
|
||||
list_for_each_entry(sibling, &rdev->consumer_list, list)
|
||||
current_uA += sibling->uA_load;
|
||||
|
||||
current_uA += rdev->constraints->system_load;
|
||||
|
||||
if (rdev->desc->ops->set_load) {
|
||||
/* set the optimum mode for our new total regulator load */
|
||||
err = rdev->desc->ops->set_load(rdev, current_uA);
|
||||
if (err < 0)
|
||||
rdev_err(rdev, "failed to set load %d\n", current_uA);
|
||||
} else {
|
||||
/* get output voltage */
|
||||
output_uV = _regulator_get_voltage(rdev);
|
||||
if (output_uV <= 0) {
|
||||
@ -697,18 +709,6 @@ static int drms_uA_update(struct regulator_dev *rdev)
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* calc total requested load */
|
||||
list_for_each_entry(sibling, &rdev->consumer_list, list)
|
||||
current_uA += sibling->uA_load;
|
||||
|
||||
current_uA += rdev->constraints->system_load;
|
||||
|
||||
if (rdev->desc->ops->set_load) {
|
||||
/* set the optimum mode for our new total regulator load */
|
||||
err = rdev->desc->ops->set_load(rdev, current_uA);
|
||||
if (err < 0)
|
||||
rdev_err(rdev, "failed to set load %d\n", current_uA);
|
||||
} else {
|
||||
/* now get the optimum mode for our new total regulator load */
|
||||
mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
|
||||
output_uV, current_uA);
|
||||
@ -3483,10 +3483,8 @@ int regulator_bulk_get(struct device *dev, int num_consumers,
|
||||
consumers[i].consumer = NULL;
|
||||
|
||||
for (i = 0; i < num_consumers; i++) {
|
||||
consumers[i].consumer = _regulator_get(dev,
|
||||
consumers[i].supply,
|
||||
false,
|
||||
!consumers[i].optional);
|
||||
consumers[i].consumer = regulator_get(dev,
|
||||
consumers[i].supply);
|
||||
if (IS_ERR(consumers[i].consumer)) {
|
||||
ret = PTR_ERR(consumers[i].consumer);
|
||||
dev_err(dev, "Failed to get supply '%s': %d\n",
|
||||
|
||||
@ -75,24 +75,6 @@ static struct ux500_regulator_debug {
|
||||
u8 *state_after_suspend;
|
||||
} rdebug;
|
||||
|
||||
void ux500_regulator_suspend_debug(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < rdebug.num_regulators; i++)
|
||||
rdebug.state_before_suspend[i] =
|
||||
rdebug.regulator_array[i].is_enabled;
|
||||
}
|
||||
|
||||
void ux500_regulator_resume_debug(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < rdebug.num_regulators; i++)
|
||||
rdebug.state_after_suspend[i] =
|
||||
rdebug.regulator_array[i].is_enabled;
|
||||
}
|
||||
|
||||
static int ux500_regulator_power_state_cnt_print(struct seq_file *s, void *p)
|
||||
{
|
||||
/* print power state count */
|
||||
|
||||
@ -164,11 +164,8 @@ int devm_regulator_bulk_get(struct device *dev, int num_consumers,
|
||||
consumers[i].consumer = NULL;
|
||||
|
||||
for (i = 0; i < num_consumers; i++) {
|
||||
consumers[i].consumer = _devm_regulator_get(dev,
|
||||
consumers[i].supply,
|
||||
consumers[i].optional ?
|
||||
OPTIONAL_GET :
|
||||
NORMAL_GET);
|
||||
consumers[i].consumer = devm_regulator_get(dev,
|
||||
consumers[i].supply);
|
||||
if (IS_ERR(consumers[i].consumer)) {
|
||||
ret = PTR_ERR(consumers[i].consumer);
|
||||
dev_err(dev, "Failed to get supply '%s': %d\n",
|
||||
|
||||
@ -477,7 +477,8 @@ static int hi6421_regulator_buck_set_mode(struct regulator_dev *rdev,
|
||||
return 0;
|
||||
}
|
||||
|
||||
unsigned int hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev,
|
||||
static unsigned int
|
||||
hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev,
|
||||
int input_uV, int output_uV, int load_uA)
|
||||
{
|
||||
struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
|
||||
420
drivers/regulator/ltc3676.c
Normal file
420
drivers/regulator/ltc3676.c
Normal file
@ -0,0 +1,420 @@
|
||||
/*
|
||||
* Copyright (C) 2016 Gateworks Corporation, Inc. All Rights Reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2
|
||||
* as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
*/
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
|
||||
#define DRIVER_NAME "ltc3676"
|
||||
|
||||
/* LTC3676 Registers */
|
||||
#define LTC3676_BUCK1 0x01
|
||||
#define LTC3676_BUCK2 0x02
|
||||
#define LTC3676_BUCK3 0x03
|
||||
#define LTC3676_BUCK4 0x04
|
||||
#define LTC3676_LDOA 0x05
|
||||
#define LTC3676_LDOB 0x06
|
||||
#define LTC3676_SQD1 0x07
|
||||
#define LTC3676_SQD2 0x08
|
||||
#define LTC3676_CNTRL 0x09
|
||||
#define LTC3676_DVB1A 0x0A
|
||||
#define LTC3676_DVB1B 0x0B
|
||||
#define LTC3676_DVB2A 0x0C
|
||||
#define LTC3676_DVB2B 0x0D
|
||||
#define LTC3676_DVB3A 0x0E
|
||||
#define LTC3676_DVB3B 0x0F
|
||||
#define LTC3676_DVB4A 0x10
|
||||
#define LTC3676_DVB4B 0x11
|
||||
#define LTC3676_MSKIRQ 0x12
|
||||
#define LTC3676_MSKPG 0x13
|
||||
#define LTC3676_USER 0x14
|
||||
#define LTC3676_IRQSTAT 0x15
|
||||
#define LTC3676_PGSTATL 0x16
|
||||
#define LTC3676_PGSTATRT 0x17
|
||||
#define LTC3676_HRST 0x1E
|
||||
#define LTC3676_CLIRQ 0x1F
|
||||
|
||||
#define LTC3676_DVBxA_REF_SELECT BIT(5)
|
||||
|
||||
#define LTC3676_IRQSTAT_PGOOD_TIMEOUT BIT(3)
|
||||
#define LTC3676_IRQSTAT_UNDERVOLT_WARN BIT(4)
|
||||
#define LTC3676_IRQSTAT_UNDERVOLT_FAULT BIT(5)
|
||||
#define LTC3676_IRQSTAT_THERMAL_WARN BIT(6)
|
||||
#define LTC3676_IRQSTAT_THERMAL_FAULT BIT(7)
|
||||
|
||||
enum ltc3676_reg {
|
||||
LTC3676_SW1,
|
||||
LTC3676_SW2,
|
||||
LTC3676_SW3,
|
||||
LTC3676_SW4,
|
||||
LTC3676_LDO1,
|
||||
LTC3676_LDO2,
|
||||
LTC3676_LDO3,
|
||||
LTC3676_LDO4,
|
||||
LTC3676_NUM_REGULATORS,
|
||||
};
|
||||
|
||||
struct ltc3676 {
|
||||
struct regmap *regmap;
|
||||
struct device *dev;
|
||||
struct regulator_desc regulator_descs[LTC3676_NUM_REGULATORS];
|
||||
struct regulator_dev *regulators[LTC3676_NUM_REGULATORS];
|
||||
};
|
||||
|
||||
static int ltc3676_set_suspend_voltage(struct regulator_dev *rdev, int uV)
|
||||
{
|
||||
struct ltc3676 *ltc3676 = rdev_get_drvdata(rdev);
|
||||
struct device *dev = ltc3676->dev;
|
||||
int dcdc = rdev_get_id(rdev);
|
||||
int sel;
|
||||
|
||||
dev_dbg(dev, "%s id=%d uV=%d\n", __func__, dcdc, uV);
|
||||
sel = regulator_map_voltage_linear(rdev, uV, uV);
|
||||
if (sel < 0)
|
||||
return sel;
|
||||
|
||||
/* DVBB register follows right after the corresponding DVBA register */
|
||||
return regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg + 1,
|
||||
rdev->desc->vsel_mask, sel);
|
||||
}
|
||||
|
||||
static int ltc3676_set_suspend_mode(struct regulator_dev *rdev,
|
||||
unsigned int mode)
|
||||
{
|
||||
struct ltc3676 *ltc3676= rdev_get_drvdata(rdev);
|
||||
struct device *dev = ltc3676->dev;
|
||||
int mask, val;
|
||||
int dcdc = rdev_get_id(rdev);
|
||||
|
||||
dev_dbg(dev, "%s id=%d mode=%d\n", __func__, dcdc, mode);
|
||||
|
||||
mask = LTC3676_DVBxA_REF_SELECT;
|
||||
switch (mode) {
|
||||
case REGULATOR_MODE_STANDBY:
|
||||
val = 0; /* select DVBxA */
|
||||
break;
|
||||
case REGULATOR_MODE_NORMAL:
|
||||
val = LTC3676_DVBxA_REF_SELECT; /* select DVBxB */
|
||||
break;
|
||||
default:
|
||||
dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n",
|
||||
rdev->desc->name, mode);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg,
|
||||
mask, val);
|
||||
}
|
||||
|
||||
static inline unsigned int ltc3676_scale(unsigned int uV, u32 r1, u32 r2)
|
||||
{
|
||||
uint64_t tmp;
|
||||
if (uV == 0)
|
||||
return 0;
|
||||
tmp = (uint64_t)uV * r1;
|
||||
do_div(tmp, r2);
|
||||
return uV + (unsigned int)tmp;
|
||||
}
|
||||
|
||||
static int ltc3676_of_parse_cb(struct device_node *np,
|
||||
const struct regulator_desc *desc,
|
||||
struct regulator_config *config)
|
||||
{
|
||||
struct ltc3676 *ltc3676 = config->driver_data;
|
||||
struct regulator_desc *rdesc = <c3676->regulator_descs[desc->id];
|
||||
u32 r[2];
|
||||
int ret;
|
||||
|
||||
/* LDO3 has a fixed output */
|
||||
if (desc->id == LTC3676_LDO3)
|
||||
return 0;
|
||||
|
||||
ret = of_property_read_u32_array(np, "lltc,fb-voltage-divider", r, 2);
|
||||
if (ret) {
|
||||
dev_err(ltc3676->dev, "Failed to parse voltage divider: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
rdesc->min_uV = ltc3676_scale(desc->min_uV, r[0], r[1]);
|
||||
rdesc->uV_step = ltc3676_scale(desc->uV_step, r[0], r[1]);
|
||||
rdesc->fixed_uV = ltc3676_scale(desc->fixed_uV, r[0], r[1]);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* SW1, SW2, SW3, SW4 linear 0.8V-3.3V with scalar via R1/R2 feeback res */
|
||||
static struct regulator_ops ltc3676_linear_regulator_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_suspend_voltage = ltc3676_set_suspend_voltage,
|
||||
.set_suspend_mode = ltc3676_set_suspend_mode,
|
||||
};
|
||||
|
||||
/* LDO1 always on fixed 0.8V-3.3V via scalar via R1/R2 feeback res */
|
||||
static struct regulator_ops ltc3676_fixed_standby_regulator_ops = {
|
||||
};
|
||||
|
||||
/* LDO2, LDO3 fixed (LDO2 has external scalar via R1/R2 feedback res) */
|
||||
static struct regulator_ops ltc3676_fixed_regulator_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
};
|
||||
|
||||
#define LTC3676_REG(_id, _name, _ops, en_reg, en_bit, dvba_reg, dvb_mask) \
|
||||
[LTC3676_ ## _id] = { \
|
||||
.name = #_name, \
|
||||
.of_match = of_match_ptr(#_name), \
|
||||
.regulators_node = of_match_ptr("regulators"), \
|
||||
.of_parse_cb = ltc3676_of_parse_cb, \
|
||||
.n_voltages = (dvb_mask) + 1, \
|
||||
.min_uV = (dvba_reg) ? 412500 : 0, \
|
||||
.uV_step = (dvba_reg) ? 12500 : 0, \
|
||||
.ramp_delay = (dvba_reg) ? 800 : 0, \
|
||||
.fixed_uV = (dvb_mask) ? 0 : 725000, \
|
||||
.ops = <c3676_ ## _ops ## _regulator_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.id = LTC3676_ ## _id, \
|
||||
.owner = THIS_MODULE, \
|
||||
.vsel_reg = (dvba_reg), \
|
||||
.vsel_mask = (dvb_mask), \
|
||||
.enable_reg = (en_reg), \
|
||||
.enable_mask = (1 << en_bit), \
|
||||
}
|
||||
|
||||
#define LTC3676_LINEAR_REG(_id, _name, _en, _dvba) \
|
||||
LTC3676_REG(_id, _name, linear, \
|
||||
LTC3676_ ## _en, 7, \
|
||||
LTC3676_ ## _dvba, 0x1f)
|
||||
|
||||
#define LTC3676_FIXED_REG(_id, _name, _en_reg, _en_bit) \
|
||||
LTC3676_REG(_id, _name, fixed, LTC3676_ ## _en_reg, _en_bit, 0, 0)
|
||||
|
||||
static struct regulator_desc ltc3676_regulators[LTC3676_NUM_REGULATORS] = {
|
||||
LTC3676_LINEAR_REG(SW1, sw1, BUCK1, DVB1A),
|
||||
LTC3676_LINEAR_REG(SW2, sw2, BUCK2, DVB2A),
|
||||
LTC3676_LINEAR_REG(SW3, sw3, BUCK3, DVB3A),
|
||||
LTC3676_LINEAR_REG(SW4, sw4, BUCK4, DVB4A),
|
||||
LTC3676_REG(LDO1, ldo1, fixed_standby, 0, 0, 0, 0),
|
||||
LTC3676_FIXED_REG(LDO2, ldo2, LDOA, 2),
|
||||
LTC3676_FIXED_REG(LDO3, ldo3, LDOA, 5),
|
||||
LTC3676_FIXED_REG(LDO4, ldo4, LDOB, 2),
|
||||
};
|
||||
|
||||
static bool ltc3676_writeable_reg(struct device *dev, unsigned int reg)
|
||||
{
|
||||
switch (reg) {
|
||||
case LTC3676_IRQSTAT:
|
||||
case LTC3676_BUCK1:
|
||||
case LTC3676_BUCK2:
|
||||
case LTC3676_BUCK3:
|
||||
case LTC3676_BUCK4:
|
||||
case LTC3676_LDOA:
|
||||
case LTC3676_LDOB:
|
||||
case LTC3676_SQD1:
|
||||
case LTC3676_SQD2:
|
||||
case LTC3676_CNTRL:
|
||||
case LTC3676_DVB1A:
|
||||
case LTC3676_DVB1B:
|
||||
case LTC3676_DVB2A:
|
||||
case LTC3676_DVB2B:
|
||||
case LTC3676_DVB3A:
|
||||
case LTC3676_DVB3B:
|
||||
case LTC3676_DVB4A:
|
||||
case LTC3676_DVB4B:
|
||||
case LTC3676_MSKIRQ:
|
||||
case LTC3676_MSKPG:
|
||||
case LTC3676_USER:
|
||||
case LTC3676_HRST:
|
||||
case LTC3676_CLIRQ:
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
static bool ltc3676_readable_reg(struct device *dev, unsigned int reg)
|
||||
{
|
||||
switch (reg) {
|
||||
case LTC3676_IRQSTAT:
|
||||
case LTC3676_BUCK1:
|
||||
case LTC3676_BUCK2:
|
||||
case LTC3676_BUCK3:
|
||||
case LTC3676_BUCK4:
|
||||
case LTC3676_LDOA:
|
||||
case LTC3676_LDOB:
|
||||
case LTC3676_SQD1:
|
||||
case LTC3676_SQD2:
|
||||
case LTC3676_CNTRL:
|
||||
case LTC3676_DVB1A:
|
||||
case LTC3676_DVB1B:
|
||||
case LTC3676_DVB2A:
|
||||
case LTC3676_DVB2B:
|
||||
case LTC3676_DVB3A:
|
||||
case LTC3676_DVB3B:
|
||||
case LTC3676_DVB4A:
|
||||
case LTC3676_DVB4B:
|
||||
case LTC3676_MSKIRQ:
|
||||
case LTC3676_MSKPG:
|
||||
case LTC3676_USER:
|
||||
case LTC3676_HRST:
|
||||
case LTC3676_CLIRQ:
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
static bool ltc3676_volatile_reg(struct device *dev, unsigned int reg)
|
||||
{
|
||||
switch (reg) {
|
||||
case LTC3676_IRQSTAT:
|
||||
case LTC3676_PGSTATL:
|
||||
case LTC3676_PGSTATRT:
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
static const struct regmap_config ltc3676_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.writeable_reg = ltc3676_writeable_reg,
|
||||
.readable_reg = ltc3676_readable_reg,
|
||||
.volatile_reg = ltc3676_volatile_reg,
|
||||
.max_register = LTC3676_CLIRQ,
|
||||
.use_single_rw = true,
|
||||
.cache_type = REGCACHE_RBTREE,
|
||||
};
|
||||
|
||||
static irqreturn_t ltc3676_isr(int irq, void *dev_id)
|
||||
{
|
||||
struct ltc3676 *ltc3676 = dev_id;
|
||||
struct device *dev = ltc3676->dev;
|
||||
unsigned int i, irqstat, event;
|
||||
|
||||
regmap_read(ltc3676->regmap, LTC3676_IRQSTAT, &irqstat);
|
||||
|
||||
dev_dbg(dev, "irq%d irqstat=0x%02x\n", irq, irqstat);
|
||||
if (irqstat & LTC3676_IRQSTAT_THERMAL_WARN) {
|
||||
dev_warn(dev, "Over-temperature Warning\n");
|
||||
event = REGULATOR_EVENT_OVER_TEMP;
|
||||
for (i = 0; i < LTC3676_NUM_REGULATORS; i++)
|
||||
regulator_notifier_call_chain(ltc3676->regulators[i],
|
||||
event, NULL);
|
||||
}
|
||||
|
||||
if (irqstat & LTC3676_IRQSTAT_UNDERVOLT_WARN) {
|
||||
dev_info(dev, "Undervoltage Warning\n");
|
||||
event = REGULATOR_EVENT_UNDER_VOLTAGE;
|
||||
for (i = 0; i < LTC3676_NUM_REGULATORS; i++)
|
||||
regulator_notifier_call_chain(ltc3676->regulators[i],
|
||||
event, NULL);
|
||||
}
|
||||
|
||||
/* Clear warning condition */
|
||||
regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int ltc3676_regulator_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct device *dev = &client->dev;
|
||||
struct regulator_init_data *init_data = dev_get_platdata(dev);
|
||||
struct regulator_desc *descs;
|
||||
struct ltc3676 *ltc3676;
|
||||
int i, ret;
|
||||
|
||||
ltc3676 = devm_kzalloc(dev, sizeof(*ltc3676), GFP_KERNEL);
|
||||
if (!ltc3676)
|
||||
return -ENOMEM;
|
||||
|
||||
i2c_set_clientdata(client, ltc3676);
|
||||
ltc3676->dev = dev;
|
||||
|
||||
descs = ltc3676->regulator_descs;
|
||||
memcpy(descs, ltc3676_regulators, sizeof(ltc3676_regulators));
|
||||
descs[LTC3676_LDO3].fixed_uV = 1800000; /* LDO3 is fixed 1.8V */
|
||||
|
||||
ltc3676->regmap = devm_regmap_init_i2c(client, <c3676_regmap_config);
|
||||
if (IS_ERR(ltc3676->regmap)) {
|
||||
ret = PTR_ERR(ltc3676->regmap);
|
||||
dev_err(dev, "failed to initialize regmap: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
for (i = 0; i < LTC3676_NUM_REGULATORS; i++) {
|
||||
struct regulator_desc *desc = <c3676->regulator_descs[i];
|
||||
struct regulator_config config = { };
|
||||
|
||||
if (init_data)
|
||||
config.init_data = &init_data[i];
|
||||
|
||||
config.dev = dev;
|
||||
config.driver_data = ltc3676;
|
||||
|
||||
ltc3676->regulators[i] = devm_regulator_register(dev, desc,
|
||||
&config);
|
||||
if (IS_ERR(ltc3676->regulators[i])) {
|
||||
ret = PTR_ERR(ltc3676->regulators[i]);
|
||||
dev_err(dev, "failed to register regulator %s: %d\n",
|
||||
desc->name, ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0);
|
||||
if (client->irq) {
|
||||
ret = devm_request_threaded_irq(dev, client->irq, NULL,
|
||||
ltc3676_isr,
|
||||
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
|
||||
client->name, ltc3676);
|
||||
if (ret) {
|
||||
dev_err(dev, "Failed to request IRQ: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id ltc3676_i2c_id[] = {
|
||||
{ "ltc3676" },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, ltc3676_i2c_id);
|
||||
|
||||
static struct i2c_driver ltc3676_driver = {
|
||||
.driver = {
|
||||
.name = DRIVER_NAME,
|
||||
},
|
||||
.probe = ltc3676_regulator_probe,
|
||||
.id_table = ltc3676_i2c_id,
|
||||
};
|
||||
module_i2c_driver(ltc3676_driver);
|
||||
|
||||
MODULE_AUTHOR("Tim Harvey <tharvey@gateworks.com>");
|
||||
MODULE_DESCRIPTION("Regulator driver for Linear Technology LTC1376");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
@ -140,8 +140,6 @@ struct regulator;
|
||||
*
|
||||
* @supply: The name of the supply. Initialised by the user before
|
||||
* using the bulk regulator APIs.
|
||||
* @optional: The supply should be considered optional. Initialised by the user
|
||||
* before using the bulk regulator APIs.
|
||||
* @consumer: The regulator consumer for the supply. This will be managed
|
||||
* by the bulk API.
|
||||
*
|
||||
@ -151,7 +149,6 @@ struct regulator;
|
||||
*/
|
||||
struct regulator_bulk_data {
|
||||
const char *supply;
|
||||
bool optional;
|
||||
struct regulator *consumer;
|
||||
|
||||
/* private: Internal use */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user