mirror of
https://github.com/torvalds/linux.git
synced 2024-11-22 20:22:09 +00:00
[PATCH] S3C24XX: hardware SPI driver
Hardware based SPI driver for Samsung S3C24XX SoC systems Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: David Brownell <david-b@pacbell.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Ben Dooks
Linus Torvalds
parent
1fc7547d4b
commit
7fba53402e
@ -108,6 +108,12 @@ config SPI_S3C24XX_GPIO
|
||||
#
|
||||
|
||||
|
||||
config SPI_S3C24XX
|
||||
tristate "Samsung S3C24XX series SPI"
|
||||
depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
|
||||
help
|
||||
SPI driver for Samsung S3C24XX series ARM SoCs
|
||||
|
||||
#
|
||||
# There are lots of SPI device types, with sensors and memory
|
||||
# being probably the most widely used ones.
|
||||
|
||||
@ -16,6 +16,7 @@ obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
|
||||
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
|
||||
obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
|
||||
obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
|
||||
obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
|
||||
# ... add above this line ...
|
||||
|
||||
# SPI protocol drivers (device/link on bus)
|
||||
|
||||
453
drivers/spi/spi_s3c24xx.c
Normal file
453
drivers/spi/spi_s3c24xx.c
Normal file
@ -0,0 +1,453 @@
|
||||
/* linux/drivers/spi/spi_s3c24xx.c
|
||||
*
|
||||
* Copyright (c) 2006 Ben Dooks
|
||||
* Copyright (c) 2006 Simtec Electronics
|
||||
* Ben Dooks <ben@simtec.co.uk>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
|
||||
//#define DEBUG
|
||||
|
||||
#include <linux/config.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/workqueue.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/spi_bitbang.h>
|
||||
|
||||
#include <asm/io.h>
|
||||
#include <asm/dma.h>
|
||||
#include <asm/hardware.h>
|
||||
|
||||
#include <asm/arch/regs-gpio.h>
|
||||
#include <asm/arch/regs-spi.h>
|
||||
#include <asm/arch/spi.h>
|
||||
|
||||
struct s3c24xx_spi {
|
||||
/* bitbang has to be first */
|
||||
struct spi_bitbang bitbang;
|
||||
struct completion done;
|
||||
|
||||
void __iomem *regs;
|
||||
int irq;
|
||||
int len;
|
||||
int count;
|
||||
|
||||
/* data buffers */
|
||||
const unsigned char *tx;
|
||||
unsigned char *rx;
|
||||
|
||||
struct clk *clk;
|
||||
struct resource *ioarea;
|
||||
struct spi_master *master;
|
||||
struct spi_device *curdev;
|
||||
struct device *dev;
|
||||
struct s3c2410_spi_info *pdata;
|
||||
};
|
||||
|
||||
#define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT)
|
||||
#define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP)
|
||||
|
||||
static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev)
|
||||
{
|
||||
return spi_master_get_devdata(sdev->master);
|
||||
}
|
||||
|
||||
static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
|
||||
{
|
||||
struct s3c24xx_spi *hw = to_hw(spi);
|
||||
unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
|
||||
unsigned int spcon;
|
||||
|
||||
switch (value) {
|
||||
case BITBANG_CS_INACTIVE:
|
||||
if (hw->pdata->set_cs)
|
||||
hw->pdata->set_cs(hw->pdata, value, cspol);
|
||||
else
|
||||
s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol ^ 1);
|
||||
break;
|
||||
|
||||
case BITBANG_CS_ACTIVE:
|
||||
spcon = readb(hw->regs + S3C2410_SPCON);
|
||||
|
||||
if (spi->mode & SPI_CPHA)
|
||||
spcon |= S3C2410_SPCON_CPHA_FMTB;
|
||||
else
|
||||
spcon &= ~S3C2410_SPCON_CPHA_FMTB;
|
||||
|
||||
if (spi->mode & SPI_CPOL)
|
||||
spcon |= S3C2410_SPCON_CPOL_HIGH;
|
||||
else
|
||||
spcon &= ~S3C2410_SPCON_CPOL_HIGH;
|
||||
|
||||
spcon |= S3C2410_SPCON_ENSCK;
|
||||
|
||||
/* write new configration */
|
||||
|
||||
writeb(spcon, hw->regs + S3C2410_SPCON);
|
||||
|
||||
if (hw->pdata->set_cs)
|
||||
hw->pdata->set_cs(hw->pdata, value, cspol);
|
||||
else
|
||||
s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol);
|
||||
|
||||
break;
|
||||
|
||||
}
|
||||
}
|
||||
|
||||
static int s3c24xx_spi_setupxfer(struct spi_device *spi,
|
||||
struct spi_transfer *t)
|
||||
{
|
||||
struct s3c24xx_spi *hw = to_hw(spi);
|
||||
unsigned int bpw;
|
||||
unsigned int hz;
|
||||
unsigned int div;
|
||||
|
||||
bpw = t ? t->bits_per_word : spi->bits_per_word;
|
||||
hz = t ? t->speed_hz : spi->max_speed_hz;
|
||||
|
||||
if (bpw != 8) {
|
||||
dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
div = clk_get_rate(hw->clk) / hz;
|
||||
|
||||
/* is clk = pclk / (2 * (pre+1)), or is it
|
||||
* clk = (pclk * 2) / ( pre + 1) */
|
||||
|
||||
div = (div / 2) - 1;
|
||||
|
||||
if (div < 0)
|
||||
div = 1;
|
||||
|
||||
if (div > 255)
|
||||
div = 255;
|
||||
|
||||
dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz);
|
||||
writeb(div, hw->regs + S3C2410_SPPRE);
|
||||
|
||||
spin_lock(&hw->bitbang.lock);
|
||||
if (!hw->bitbang.busy) {
|
||||
hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
|
||||
/* need to ndelay for 0.5 clocktick ? */
|
||||
}
|
||||
spin_unlock(&hw->bitbang.lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int s3c24xx_spi_setup(struct spi_device *spi)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (!spi->bits_per_word)
|
||||
spi->bits_per_word = 8;
|
||||
|
||||
if ((spi->mode & SPI_LSB_FIRST) != 0)
|
||||
return -EINVAL;
|
||||
|
||||
ret = s3c24xx_spi_setupxfer(spi, NULL);
|
||||
if (ret < 0) {
|
||||
dev_err(&spi->dev, "setupxfer returned %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n",
|
||||
__FUNCTION__, spi->mode, spi->bits_per_word,
|
||||
spi->max_speed_hz);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count)
|
||||
{
|
||||
return hw->tx ? hw->tx[count] : 0xff;
|
||||
}
|
||||
|
||||
static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
|
||||
{
|
||||
struct s3c24xx_spi *hw = to_hw(spi);
|
||||
|
||||
dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
|
||||
t->tx_buf, t->rx_buf, t->len);
|
||||
|
||||
hw->tx = t->tx_buf;
|
||||
hw->rx = t->rx_buf;
|
||||
hw->len = t->len;
|
||||
hw->count = 0;
|
||||
|
||||
/* send the first byte */
|
||||
writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT);
|
||||
wait_for_completion(&hw->done);
|
||||
|
||||
return hw->count;
|
||||
}
|
||||
|
||||
static irqreturn_t s3c24xx_spi_irq(int irq, void *dev, struct pt_regs *regs)
|
||||
{
|
||||
struct s3c24xx_spi *hw = dev;
|
||||
unsigned int spsta = readb(hw->regs + S3C2410_SPSTA);
|
||||
unsigned int count = hw->count;
|
||||
|
||||
if (spsta & S3C2410_SPSTA_DCOL) {
|
||||
dev_dbg(hw->dev, "data-collision\n");
|
||||
complete(&hw->done);
|
||||
goto irq_done;
|
||||
}
|
||||
|
||||
if (!(spsta & S3C2410_SPSTA_READY)) {
|
||||
dev_dbg(hw->dev, "spi not ready for tx?\n");
|
||||
complete(&hw->done);
|
||||
goto irq_done;
|
||||
}
|
||||
|
||||
hw->count++;
|
||||
|
||||
if (hw->rx)
|
||||
hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT);
|
||||
|
||||
count++;
|
||||
|
||||
if (count < hw->len)
|
||||
writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT);
|
||||
else
|
||||
complete(&hw->done);
|
||||
|
||||
irq_done:
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int s3c24xx_spi_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct s3c24xx_spi *hw;
|
||||
struct spi_master *master;
|
||||
struct spi_board_info *bi;
|
||||
struct resource *res;
|
||||
int err = 0;
|
||||
int i;
|
||||
|
||||
master = spi_alloc_master(&pdev->dev, sizeof(struct s3c24xx_spi));
|
||||
if (master == NULL) {
|
||||
dev_err(&pdev->dev, "No memory for spi_master\n");
|
||||
err = -ENOMEM;
|
||||
goto err_nomem;
|
||||
}
|
||||
|
||||
hw = spi_master_get_devdata(master);
|
||||
memset(hw, 0, sizeof(struct s3c24xx_spi));
|
||||
|
||||
hw->master = spi_master_get(master);
|
||||
hw->pdata = pdev->dev.platform_data;
|
||||
hw->dev = &pdev->dev;
|
||||
|
||||
if (hw->pdata == NULL) {
|
||||
dev_err(&pdev->dev, "No platform data supplied\n");
|
||||
err = -ENOENT;
|
||||
goto err_no_pdata;
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, hw);
|
||||
init_completion(&hw->done);
|
||||
|
||||
/* setup the state for the bitbang driver */
|
||||
|
||||
hw->bitbang.master = hw->master;
|
||||
hw->bitbang.setup_transfer = s3c24xx_spi_setupxfer;
|
||||
hw->bitbang.chipselect = s3c24xx_spi_chipsel;
|
||||
hw->bitbang.txrx_bufs = s3c24xx_spi_txrx;
|
||||
hw->bitbang.master->setup = s3c24xx_spi_setup;
|
||||
|
||||
dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
|
||||
|
||||
/* find and map our resources */
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (res == NULL) {
|
||||
dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
|
||||
err = -ENOENT;
|
||||
goto err_no_iores;
|
||||
}
|
||||
|
||||
hw->ioarea = request_mem_region(res->start, (res->end - res->start)+1,
|
||||
pdev->name);
|
||||
|
||||
if (hw->ioarea == NULL) {
|
||||
dev_err(&pdev->dev, "Cannot reserve region\n");
|
||||
err = -ENXIO;
|
||||
goto err_no_iores;
|
||||
}
|
||||
|
||||
hw->regs = ioremap(res->start, (res->end - res->start)+1);
|
||||
if (hw->regs == NULL) {
|
||||
dev_err(&pdev->dev, "Cannot map IO\n");
|
||||
err = -ENXIO;
|
||||
goto err_no_iomap;
|
||||
}
|
||||
|
||||
hw->irq = platform_get_irq(pdev, 0);
|
||||
if (hw->irq < 0) {
|
||||
dev_err(&pdev->dev, "No IRQ specified\n");
|
||||
err = -ENOENT;
|
||||
goto err_no_irq;
|
||||
}
|
||||
|
||||
err = request_irq(hw->irq, s3c24xx_spi_irq, 0, pdev->name, hw);
|
||||
if (err) {
|
||||
dev_err(&pdev->dev, "Cannot claim IRQ\n");
|
||||
goto err_no_irq;
|
||||
}
|
||||
|
||||
hw->clk = clk_get(&pdev->dev, "spi");
|
||||
if (IS_ERR(hw->clk)) {
|
||||
dev_err(&pdev->dev, "No clock for device\n");
|
||||
err = PTR_ERR(hw->clk);
|
||||
goto err_no_clk;
|
||||
}
|
||||
|
||||
/* for the moment, permanently enable the clock */
|
||||
|
||||
clk_enable(hw->clk);
|
||||
|
||||
/* program defaults into the registers */
|
||||
|
||||
writeb(0xff, hw->regs + S3C2410_SPPRE);
|
||||
writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
|
||||
writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
|
||||
|
||||
/* setup any gpio we can */
|
||||
|
||||
if (!hw->pdata->set_cs) {
|
||||
s3c2410_gpio_setpin(hw->pdata->pin_cs, 1);
|
||||
s3c2410_gpio_cfgpin(hw->pdata->pin_cs, S3C2410_GPIO_OUTPUT);
|
||||
}
|
||||
|
||||
/* register our spi controller */
|
||||
|
||||
err = spi_bitbang_start(&hw->bitbang);
|
||||
if (err) {
|
||||
dev_err(&pdev->dev, "Failed to register SPI master\n");
|
||||
goto err_register;
|
||||
}
|
||||
|
||||
dev_dbg(hw->dev, "shutdown=%d\n", hw->bitbang.shutdown);
|
||||
|
||||
/* register all the devices associated */
|
||||
|
||||
bi = &hw->pdata->board_info[0];
|
||||
for (i = 0; i < hw->pdata->board_size; i++, bi++) {
|
||||
dev_info(hw->dev, "registering %s\n", bi->modalias);
|
||||
|
||||
bi->controller_data = hw;
|
||||
spi_new_device(master, bi);
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
err_register:
|
||||
clk_disable(hw->clk);
|
||||
clk_put(hw->clk);
|
||||
|
||||
err_no_clk:
|
||||
free_irq(hw->irq, hw);
|
||||
|
||||
err_no_irq:
|
||||
iounmap(hw->regs);
|
||||
|
||||
err_no_iomap:
|
||||
release_resource(hw->ioarea);
|
||||
kfree(hw->ioarea);
|
||||
|
||||
err_no_iores:
|
||||
err_no_pdata:
|
||||
spi_master_put(hw->master);;
|
||||
|
||||
err_nomem:
|
||||
return err;
|
||||
}
|
||||
|
||||
static int s3c24xx_spi_remove(struct platform_device *dev)
|
||||
{
|
||||
struct s3c24xx_spi *hw = platform_get_drvdata(dev);
|
||||
|
||||
platform_set_drvdata(dev, NULL);
|
||||
|
||||
spi_unregister_master(hw->master);
|
||||
|
||||
clk_disable(hw->clk);
|
||||
clk_put(hw->clk);
|
||||
|
||||
free_irq(hw->irq, hw);
|
||||
iounmap(hw->regs);
|
||||
|
||||
release_resource(hw->ioarea);
|
||||
kfree(hw->ioarea);
|
||||
|
||||
spi_master_put(hw->master);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
|
||||
static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
|
||||
{
|
||||
struct s3c24xx_spi *hw = platform_get_drvdata(dev);
|
||||
|
||||
clk_disable(hw->clk);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int s3c24xx_spi_resume(struct platform_device *pdev)
|
||||
{
|
||||
struct s3c24xx_spi *hw = platform_get_drvdata(dev);
|
||||
|
||||
clk_enable(hw->clk);
|
||||
return 0;
|
||||
}
|
||||
|
||||
#else
|
||||
#define s3c24xx_spi_suspend NULL
|
||||
#define s3c24xx_spi_resume NULL
|
||||
#endif
|
||||
|
||||
static struct platform_driver s3c24xx_spidrv = {
|
||||
.probe = s3c24xx_spi_probe,
|
||||
.remove = s3c24xx_spi_remove,
|
||||
.suspend = s3c24xx_spi_suspend,
|
||||
.resume = s3c24xx_spi_resume,
|
||||
.driver = {
|
||||
.name = "s3c2410-spi",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init s3c24xx_spi_init(void)
|
||||
{
|
||||
return platform_driver_register(&s3c24xx_spidrv);
|
||||
}
|
||||
|
||||
static void __exit s3c24xx_spi_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&s3c24xx_spidrv);
|
||||
}
|
||||
|
||||
module_init(s3c24xx_spi_init);
|
||||
module_exit(s3c24xx_spi_exit);
|
||||
|
||||
MODULE_DESCRIPTION("S3C24XX SPI Driver");
|
||||
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
|
||||
MODULE_LICENSE("GPL");
|
||||
29
include/asm-arm/arch-s3c2410/spi.h
Normal file
29
include/asm-arm/arch-s3c2410/spi.h
Normal file
@ -0,0 +1,29 @@
|
||||
/* linux/include/asm-arm/arch-s3c2410/spi.h
|
||||
*
|
||||
* Copyright (c) 2006 Simtec Electronics
|
||||
* Ben Dooks <ben@simtec.co.uk>
|
||||
*
|
||||
* S3C2410 - SPI Controller platform_device info
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_SPI_H
|
||||
#define __ASM_ARCH_SPI_H __FILE__
|
||||
|
||||
struct s3c2410_spi_info;
|
||||
struct spi_board_info;
|
||||
|
||||
struct s3c2410_spi_info {
|
||||
unsigned long pin_cs; /* simple gpio cs */
|
||||
|
||||
unsigned long board_size;
|
||||
struct spi_board_info *board_info;
|
||||
|
||||
void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
|
||||
};
|
||||
|
||||
|
||||
#endif /* __ASM_ARCH_SPI_H */
|
||||
Loading…
Reference in New Issue
Block a user