igb: Add support for quad port WOL and feature flags

Change igb from using a series of boolean operators to using a single flags
value that contains a number of different bit flags for all the different
features of the adapter.

This patch also adds WOL support for quad port adapters.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Alexander Duyck 2008-07-08 15:10:46 -07:00 committed by Jeff Garzik
parent 2d064c06fe
commit 7dfc16fab1
3 changed files with 81 additions and 36 deletions

View File

@ -270,10 +270,7 @@ struct igb_adapter {
/* to not mess up cache alignment, always add to the bottom */
unsigned long state;
unsigned int msi_enabled;
#ifdef CONFIG_DCA
unsigned int dca_enabled;
#endif
unsigned int flags;
u32 eeprom_wol;
/* for ioport free */
@ -285,6 +282,14 @@ struct igb_adapter {
#endif /* CONFIG_NETDEVICES_MULTIQUEUE */
};
#define IGB_FLAG_HAS_MSI (1 << 0)
#define IGB_FLAG_MSI_ENABLE (1 << 1)
#define IGB_FLAG_HAS_DCA (1 << 2)
#define IGB_FLAG_DCA_ENABLED (1 << 3)
#define IGB_FLAG_IN_NETPOLL (1 << 5)
#define IGB_FLAG_QUAD_PORT_A (1 << 6)
#define IGB_FLAG_NEED_CTX_IDX (1 << 7)
enum e1000_state_t {
__IGB_TESTING,
__IGB_RESETTING,

View File

@ -1097,7 +1097,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
if (adapter->msix_entries) {
/* NOTE: we don't test MSI-X interrupts here, yet */
return 0;
} else if (adapter->msi_enabled) {
} else if (adapter->flags & IGB_FLAG_HAS_MSI) {
shared_int = false;
if (request_irq(irq, &igb_test_intr, 0, netdev->name, netdev)) {
*data = 1;
@ -1727,7 +1727,6 @@ static int igb_wol_exclusion(struct igb_adapter *adapter,
switch (hw->device_id) {
case E1000_DEV_ID_82575GB_QUAD_COPPER:
case E1000_DEV_ID_82576_QUAD_COPPER:
/* WoL not supported */
wol->supported = 0;
break;
@ -1742,6 +1741,15 @@ static int igb_wol_exclusion(struct igb_adapter *adapter,
/* return success for non excluded adapter ports */
retval = 0;
break;
case E1000_DEV_ID_82576_QUAD_COPPER:
/* quad port adapters only support WoL on port A */
if (!(adapter->flags & IGB_FLAG_QUAD_PORT_A)) {
wol->supported = 0;
break;
}
/* return success for non excluded adapter ports */
retval = 0;
break;
default:
/* dual port cards only support WoL on port A from now on
* unless it was enabled in the eeprom for port B

View File

@ -53,7 +53,6 @@ static const char igb_driver_string[] =
"Intel(R) Gigabit Ethernet Network Driver";
static const char igb_copyright[] = "Copyright (c) 2008 Intel Corporation.";
static const struct e1000_info *igb_info_tbl[] = {
[board_82575] = &e1000_82575_info,
};
@ -170,6 +169,8 @@ static struct pci_driver igb_driver = {
.err_handler = &igb_err_handler
};
static int global_quad_port_a; /* global quad port a indication */
MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
MODULE_LICENSE("GPL");
@ -201,6 +202,8 @@ static int __init igb_init_module(void)
printk(KERN_INFO "%s\n", igb_copyright);
global_quad_port_a = 0;
ret = pci_register_driver(&igb_driver);
#ifdef CONFIG_DCA
dca_register_notify(&dca_notifier);
@ -471,7 +474,7 @@ static void igb_reset_interrupt_capability(struct igb_adapter *adapter)
pci_disable_msix(adapter->pdev);
kfree(adapter->msix_entries);
adapter->msix_entries = NULL;
} else if (adapter->msi_enabled)
} else if (adapter->flags & IGB_FLAG_HAS_MSI)
pci_disable_msi(adapter->pdev);
return;
}
@ -510,7 +513,7 @@ msi_only:
adapter->num_rx_queues = 1;
adapter->num_tx_queues = 1;
if (!pci_enable_msi(adapter->pdev))
adapter->msi_enabled = 1;
adapter->flags |= IGB_FLAG_HAS_MSI;
#ifdef CONFIG_NETDEVICES_MULTIQUEUE
/* Notify the stack of the (possibly) reduced Tx Queue count. */
@ -538,7 +541,7 @@ static int igb_request_irq(struct igb_adapter *adapter)
/* fall back to MSI */
igb_reset_interrupt_capability(adapter);
if (!pci_enable_msi(adapter->pdev))
adapter->msi_enabled = 1;
adapter->flags |= IGB_FLAG_HAS_MSI;
igb_free_all_tx_resources(adapter);
igb_free_all_rx_resources(adapter);
adapter->num_rx_queues = 1;
@ -557,14 +560,14 @@ static int igb_request_irq(struct igb_adapter *adapter)
}
}
if (adapter->msi_enabled) {
if (adapter->flags & IGB_FLAG_HAS_MSI) {
err = request_irq(adapter->pdev->irq, &igb_intr_msi, 0,
netdev->name, netdev);
if (!err)
goto request_done;
/* fall back to legacy interrupts */
igb_reset_interrupt_capability(adapter);
adapter->msi_enabled = 0;
adapter->flags &= ~IGB_FLAG_HAS_MSI;
}
err = request_irq(adapter->pdev->irq, &igb_intr, IRQF_SHARED,
@ -1097,6 +1100,17 @@ static int __devinit igb_probe(struct pci_dev *pdev,
igb_get_bus_info_pcie(hw);
/* set flags */
switch (hw->mac.type) {
case e1000_82576:
case e1000_82575:
adapter->flags |= IGB_FLAG_HAS_DCA;
adapter->flags |= IGB_FLAG_NEED_CTX_IDX;
break;
default:
break;
}
hw->phy.autoneg_wait_to_complete = false;
hw->mac.adaptive_ifs = true;
@ -1209,7 +1223,6 @@ static int __devinit igb_probe(struct pci_dev *pdev,
* lan on a particular port */
switch (pdev->device) {
case E1000_DEV_ID_82575GB_QUAD_COPPER:
case E1000_DEV_ID_82576_QUAD_COPPER:
adapter->eeprom_wol = 0;
break;
case E1000_DEV_ID_82575EB_FIBER_SERDES:
@ -1220,6 +1233,16 @@ static int __devinit igb_probe(struct pci_dev *pdev,
if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
adapter->eeprom_wol = 0;
break;
case E1000_DEV_ID_82576_QUAD_COPPER:
/* if quad port adapter, disable WoL on all but port A */
if (global_quad_port_a != 0)
adapter->eeprom_wol = 0;
else
adapter->flags |= IGB_FLAG_QUAD_PORT_A;
/* Reset for multiple quad port adapters */
if (++global_quad_port_a == 4)
global_quad_port_a = 0;
break;
}
/* initialize the wol settings based on the eeprom settings */
@ -1246,8 +1269,9 @@ static int __devinit igb_probe(struct pci_dev *pdev,
goto err_register;
#ifdef CONFIG_DCA
if (dca_add_requester(&pdev->dev) == 0) {
adapter->dca_enabled = true;
if ((adapter->flags & IGB_FLAG_HAS_DCA) &&
(dca_add_requester(&pdev->dev) == 0)) {
adapter->flags |= IGB_FLAG_DCA_ENABLED;
dev_info(&pdev->dev, "DCA enabled\n");
/* Always use CB2 mode, difference is masked
* in the CB driver. */
@ -1276,7 +1300,7 @@ static int __devinit igb_probe(struct pci_dev *pdev,
dev_info(&pdev->dev,
"Using %s interrupts. %d rx queue(s), %d tx queue(s)\n",
adapter->msix_entries ? "MSI-X" :
adapter->msi_enabled ? "MSI" : "legacy",
(adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy",
adapter->num_rx_queues, adapter->num_tx_queues);
return 0;
@ -1330,10 +1354,10 @@ static void __devexit igb_remove(struct pci_dev *pdev)
flush_scheduled_work();
#ifdef CONFIG_DCA
if (adapter->dca_enabled) {
if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
dev_info(&pdev->dev, "DCA disabled\n");
dca_remove_requester(&pdev->dev);
adapter->dca_enabled = false;
adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
wr32(E1000_DCA_CTRL, 1);
}
#endif
@ -2650,9 +2674,9 @@ static inline int igb_tso_adv(struct igb_adapter *adapter,
mss_l4len_idx = (skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT);
mss_l4len_idx |= (l4len << E1000_ADVTXD_L4LEN_SHIFT);
/* Context index must be unique per ring. Luckily, so is the interrupt
* mask value. */
mss_l4len_idx |= tx_ring->eims_value >> 4;
/* Context index must be unique per ring. */
if (adapter->flags & IGB_FLAG_NEED_CTX_IDX)
mss_l4len_idx |= tx_ring->queue_index << 4;
context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
context_desc->seqnum_seed = 0;
@ -2716,8 +2740,9 @@ static inline bool igb_tx_csum_adv(struct igb_adapter *adapter,
context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
context_desc->seqnum_seed = 0;
context_desc->mss_l4len_idx =
cpu_to_le32(tx_ring->queue_index << 4);
if (adapter->flags & IGB_FLAG_NEED_CTX_IDX)
context_desc->mss_l4len_idx =
cpu_to_le32(tx_ring->queue_index << 4);
buffer_info->time_stamp = jiffies;
buffer_info->dma = 0;
@ -2818,8 +2843,9 @@ static inline void igb_tx_queue_adv(struct igb_adapter *adapter,
olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
}
if (tx_flags & (IGB_TX_FLAGS_CSUM | IGB_TX_FLAGS_TSO |
IGB_TX_FLAGS_VLAN))
if ((adapter->flags & IGB_FLAG_NEED_CTX_IDX) &&
(tx_flags & (IGB_TX_FLAGS_CSUM | IGB_TX_FLAGS_TSO |
IGB_TX_FLAGS_VLAN)))
olinfo_status |= tx_ring->queue_index << 4;
olinfo_status |= ((paylen - hdr_len) << E1000_ADVTXD_PAYLEN_SHIFT);
@ -3255,7 +3281,7 @@ static irqreturn_t igb_msix_tx(int irq, void *data)
if (!tx_ring->itr_val)
wr32(E1000_EIMC, tx_ring->eims_value);
#ifdef CONFIG_DCA
if (adapter->dca_enabled)
if (adapter->flags & IGB_FLAG_DCA_ENABLED)
igb_update_tx_dca(tx_ring);
#endif
tx_ring->total_bytes = 0;
@ -3292,7 +3318,7 @@ static irqreturn_t igb_msix_rx(int irq, void *data)
__netif_rx_schedule(adapter->netdev, &rx_ring->napi);
#ifdef CONFIG_DCA
if (adapter->dca_enabled)
if (adapter->flags & IGB_FLAG_DCA_ENABLED)
igb_update_rx_dca(rx_ring);
#endif
return IRQ_HANDLED;
@ -3355,7 +3381,7 @@ static void igb_setup_dca(struct igb_adapter *adapter)
{
int i;
if (!(adapter->dca_enabled))
if (!(adapter->flags & IGB_FLAG_DCA_ENABLED))
return;
for (i = 0; i < adapter->num_tx_queues; i++) {
@ -3375,12 +3401,15 @@ static int __igb_notify_dca(struct device *dev, void *data)
struct e1000_hw *hw = &adapter->hw;
unsigned long event = *(unsigned long *)data;
if (!(adapter->flags & IGB_FLAG_HAS_DCA))
goto out;
switch (event) {
case DCA_PROVIDER_ADD:
/* if already enabled, don't do it again */
if (adapter->dca_enabled)
if (adapter->flags & IGB_FLAG_DCA_ENABLED)
break;
adapter->dca_enabled = true;
adapter->flags |= IGB_FLAG_DCA_ENABLED;
/* Always use CB2 mode, difference is masked
* in the CB driver. */
wr32(E1000_DCA_CTRL, 2);
@ -3391,17 +3420,17 @@ static int __igb_notify_dca(struct device *dev, void *data)
}
/* Fall Through since DCA is disabled. */
case DCA_PROVIDER_REMOVE:
if (adapter->dca_enabled) {
if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
/* without this a class_device is left
* hanging around in the sysfs model */
dca_remove_requester(dev);
dev_info(&adapter->pdev->dev, "DCA disabled\n");
adapter->dca_enabled = false;
adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
wr32(E1000_DCA_CTRL, 1);
}
break;
}
out:
return 0;
}
@ -3507,13 +3536,13 @@ static int igb_poll(struct napi_struct *napi, int budget)
/* this poll routine only supports one tx and one rx queue */
#ifdef CONFIG_DCA
if (adapter->dca_enabled)
if (adapter->flags & IGB_FLAG_DCA_ENABLED)
igb_update_tx_dca(&adapter->tx_ring[0]);
#endif
tx_clean_complete = igb_clean_tx_irq(&adapter->tx_ring[0]);
#ifdef CONFIG_DCA
if (adapter->dca_enabled)
if (adapter->flags & IGB_FLAG_DCA_ENABLED)
igb_update_rx_dca(&adapter->rx_ring[0]);
#endif
igb_clean_rx_irq_adv(&adapter->rx_ring[0], &work_done, budget);
@ -3545,7 +3574,7 @@ static int igb_clean_rx_ring_msix(struct napi_struct *napi, int budget)
goto quit_polling;
#ifdef CONFIG_DCA
if (adapter->dca_enabled)
if (adapter->flags & IGB_FLAG_DCA_ENABLED)
igb_update_rx_dca(rx_ring);
#endif
igb_clean_rx_irq_adv(rx_ring, &work_done, budget);
@ -4350,6 +4379,8 @@ static void igb_netpoll(struct net_device *netdev)
int work_done = 0;
igb_irq_disable(adapter);
adapter->flags |= IGB_FLAG_IN_NETPOLL;
for (i = 0; i < adapter->num_tx_queues; i++)
igb_clean_tx_irq(&adapter->tx_ring[i]);
@ -4358,6 +4389,7 @@ static void igb_netpoll(struct net_device *netdev)
&work_done,
adapter->rx_ring[i].napi.weight);
adapter->flags &= ~IGB_FLAG_IN_NETPOLL;
igb_irq_enable(adapter);
}
#endif /* CONFIG_NET_POLL_CONTROLLER */