media: i2c: tw9910: Remove soc_camera dependencies

Remove soc_camera framework dependencies from tw9910 sensor driver.
- Handle clock and gpios
- Register async subdevice
- Remove soc_camera specific g/s_mbus_config operations
- Add kernel doc to driver interface header file
- Adjust build system

This commit does not remove the original soc_camera based driver as long
as other platforms depends on soc_camera-based CEU driver.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
Jacopo Mondi 2018-02-21 12:48:03 -05:00 committed by Mauro Carvalho Chehab
parent e0d76c3842
commit 7b20f325a5
4 changed files with 120 additions and 61 deletions

View File

@ -432,6 +432,15 @@ config VIDEO_TW9906
To compile this driver as a module, choose M here: the
module will be called tw9906.
config VIDEO_TW9910
tristate "Techwell TW9910 video decoder"
depends on VIDEO_V4L2 && I2C
---help---
Support for Techwell TW9910 NTSC/PAL/SECAM video decoder.
To compile this driver as a module, choose M here: the
module will be called tw9910.
config VIDEO_VPX3220
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
depends on VIDEO_V4L2 && I2C

View File

@ -49,6 +49,7 @@ obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o
obj-$(CONFIG_VIDEO_TW2804) += tw2804.o
obj-$(CONFIG_VIDEO_TW9903) += tw9903.o
obj-$(CONFIG_VIDEO_TW9906) += tw9906.o
obj-$(CONFIG_VIDEO_TW9910) += tw9910.o
obj-$(CONFIG_VIDEO_CS3308) += cs3308.o
obj-$(CONFIG_VIDEO_CS5345) += cs5345.o
obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o

View File

@ -1,6 +1,9 @@
// SPDX-License-Identifier: GPL-2.0
/*
* tw9910 Video Driver
*
* Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
*
* Copyright (C) 2008 Renesas Solutions Corp.
* Kuninori Morimoto <morimoto.kuninori@renesas.com>
*
@ -10,12 +13,10 @@
* Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
* Copyright (C) 2008 Magnus Damm
* Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/gpio/consumer.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/i2c.h>
@ -25,9 +26,7 @@
#include <linux/v4l2-mediabus.h>
#include <linux/videodev2.h>
#include <media/soc_camera.h>
#include <media/i2c/tw9910.h>
#include <media/v4l2-clk.h>
#include <media/v4l2-subdev.h>
#define GET_ID(val) ((val & 0xF8) >> 3)
@ -228,8 +227,10 @@ struct tw9910_scale_ctrl {
struct tw9910_priv {
struct v4l2_subdev subdev;
struct v4l2_clk *clk;
struct clk *clk;
struct tw9910_video_info *info;
struct gpio_desc *pdn_gpio;
struct gpio_desc *rstb_gpio;
const struct tw9910_scale_ctrl *scale;
v4l2_std_id norm;
u32 revision;
@ -582,13 +583,66 @@ static int tw9910_s_register(struct v4l2_subdev *sd,
}
#endif
static int tw9910_power_on(struct tw9910_priv *priv)
{
struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
int ret;
if (priv->clk) {
ret = clk_prepare_enable(priv->clk);
if (ret)
return ret;
}
if (priv->pdn_gpio) {
gpiod_set_value(priv->pdn_gpio, 0);
usleep_range(500, 1000);
}
/*
* FIXME: The reset signal is connected to a shared GPIO on some
* platforms (namely the SuperH Migo-R). Until a framework becomes
* available to handle this cleanly, request the GPIO temporarily
* to avoid conflicts.
*/
priv->rstb_gpio = gpiod_get_optional(&client->dev, "rstb",
GPIOD_OUT_LOW);
if (IS_ERR(priv->rstb_gpio)) {
dev_info(&client->dev, "Unable to get GPIO \"rstb\"");
return PTR_ERR(priv->rstb_gpio);
}
if (priv->rstb_gpio) {
gpiod_set_value(priv->rstb_gpio, 1);
usleep_range(500, 1000);
gpiod_set_value(priv->rstb_gpio, 0);
usleep_range(500, 1000);
gpiod_put(priv->rstb_gpio);
}
return 0;
}
static int tw9910_power_off(struct tw9910_priv *priv)
{
clk_disable_unprepare(priv->clk);
if (priv->pdn_gpio) {
gpiod_set_value(priv->pdn_gpio, 1);
usleep_range(500, 1000);
}
return 0;
}
static int tw9910_s_power(struct v4l2_subdev *sd, int on)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
struct tw9910_priv *priv = to_tw9910(client);
return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);
return on ? tw9910_power_on(priv) :
tw9910_power_off(priv);
}
static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height)
@ -614,7 +668,7 @@ static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height)
* set bus width
*/
val = 0x00;
if (SOCAM_DATAWIDTH_16 == priv->info->buswidth)
if (priv->info->buswidth == 16)
val = LEN;
ret = tw9910_mask_set(client, OPFORM, LEN, val);
@ -799,8 +853,7 @@ static int tw9910_video_probe(struct i2c_client *client)
/*
* tw9910 only use 8 or 16 bit bus width
*/
if (SOCAM_DATAWIDTH_16 != priv->info->buswidth &&
SOCAM_DATAWIDTH_8 != priv->info->buswidth) {
if (priv->info->buswidth != 16 && priv->info->buswidth != 8) {
dev_err(&client->dev, "bus width error\n");
return -ENODEV;
}
@ -856,45 +909,6 @@ static int tw9910_enum_mbus_code(struct v4l2_subdev *sd,
return 0;
}
static int tw9910_g_mbus_config(struct v4l2_subdev *sd,
struct v4l2_mbus_config *cfg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
V4L2_MBUS_DATA_ACTIVE_HIGH;
cfg->type = V4L2_MBUS_PARALLEL;
cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
return 0;
}
static int tw9910_s_mbus_config(struct v4l2_subdev *sd,
const struct v4l2_mbus_config *cfg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
u8 val = VSSL_VVALID | HSSL_DVALID;
unsigned long flags = soc_camera_apply_board_flags(ssdd, cfg);
/*
* set OUTCTR1
*
* We use VVALID and DVALID signals to control VSYNC and HSYNC
* outputs, in this mode their polarity is inverted.
*/
if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
val |= HSP_HI;
if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
val |= VSP_HI;
return i2c_smbus_write_byte_data(client, OUTCTR1, val);
}
static int tw9910_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *norm)
{
*norm = V4L2_STD_NTSC | V4L2_STD_PAL;
@ -905,8 +919,6 @@ static const struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
.s_std = tw9910_s_std,
.g_std = tw9910_g_std,
.s_stream = tw9910_s_stream,
.g_mbus_config = tw9910_g_mbus_config,
.s_mbus_config = tw9910_s_mbus_config,
.g_tvnorms = tw9910_g_tvnorms,
};
@ -935,15 +947,14 @@ static int tw9910_probe(struct i2c_client *client,
struct tw9910_video_info *info;
struct i2c_adapter *adapter =
to_i2c_adapter(client->dev.parent);
struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
int ret;
if (!ssdd || !ssdd->drv_priv) {
if (!client->dev.platform_data) {
dev_err(&client->dev, "TW9910: missing platform data!\n");
return -EINVAL;
}
info = ssdd->drv_priv;
info = client->dev.platform_data;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&client->dev,
@ -959,13 +970,37 @@ static int tw9910_probe(struct i2c_client *client,
v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops);
priv->clk = v4l2_clk_get(&client->dev, "mclk");
if (IS_ERR(priv->clk))
priv->clk = clk_get(&client->dev, "xti");
if (PTR_ERR(priv->clk) == -ENOENT) {
priv->clk = NULL;
} else if (IS_ERR(priv->clk)) {
dev_err(&client->dev, "Unable to get xti clock\n");
return PTR_ERR(priv->clk);
}
priv->pdn_gpio = gpiod_get_optional(&client->dev, "pdn",
GPIOD_OUT_HIGH);
if (IS_ERR(priv->pdn_gpio)) {
dev_info(&client->dev, "Unable to get GPIO \"pdn\"");
ret = PTR_ERR(priv->pdn_gpio);
goto error_clk_put;
}
ret = tw9910_video_probe(client);
if (ret < 0)
v4l2_clk_put(priv->clk);
goto error_gpio_put;
ret = v4l2_async_register_subdev(&priv->subdev);
if (ret)
goto error_gpio_put;
return ret;
error_gpio_put:
if (priv->pdn_gpio)
gpiod_put(priv->pdn_gpio);
error_clk_put:
clk_put(priv->clk);
return ret;
}
@ -973,7 +1008,12 @@ static int tw9910_probe(struct i2c_client *client,
static int tw9910_remove(struct i2c_client *client)
{
struct tw9910_priv *priv = to_tw9910(client);
v4l2_clk_put(priv->clk);
if (priv->pdn_gpio)
gpiod_put(priv->pdn_gpio);
clk_put(priv->clk);
v4l2_device_unregister_subdev(&priv->subdev);
return 0;
}
@ -994,6 +1034,6 @@ static struct i2c_driver tw9910_i2c_driver = {
module_i2c_driver(tw9910_i2c_driver);
MODULE_DESCRIPTION("SoC Camera driver for tw9910");
MODULE_DESCRIPTION("V4L2 driver for TW9910 video decoder");
MODULE_AUTHOR("Kuninori Morimoto");
MODULE_LICENSE("GPL v2");

View File

@ -18,6 +18,9 @@
#include <media/soc_camera.h>
/**
* tw9910_mpout_pin - MPOUT (multi-purpose output) pin functions
*/
enum tw9910_mpout_pin {
TW9910_MPO_VLOSS,
TW9910_MPO_HLOCK,
@ -29,6 +32,12 @@ enum tw9910_mpout_pin {
TW9910_MPO_RTCO,
};
/**
* tw9910_video_info - tw9910 driver interface structure
* @buswidth: Parallel data bus width (8 or 16).
* @mpout: Selected function of MPOUT (multi-purpose output) pin.
* See &enum tw9910_mpout_pin
*/
struct tw9910_video_info {
unsigned long buswidth;
enum tw9910_mpout_pin mpout;