coresight: bindings for coresight drivers

Coresight IP blocks allow for the support of HW assisted tracing
on ARM SoCs.  Bindings for the currently available blocks are
presented herein.

Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/devicetree/bindings/arm/coresight.txt

@@ -0,0 +1,204 @@
+* CoreSight Components:
+
+CoreSight components are compliant with the ARM CoreSight architecture
+specification and can be connected in various topologies to suit a particular
+SoCs tracing needs. These trace components can generally be classified as
+sinks, links and sources. Trace data produced by one or more sources flows
+through the intermediate links connecting the source to the currently selected
+sink. Each CoreSight component device should use these properties to describe
+its hardware characteristcs.
+
+* Required properties for all components *except* non-configurable replicators:
+
+	* compatible: These have to be supplemented with "arm,primecell" as
+	  drivers are using the AMBA bus interface.  Possible values include:
+		- "arm,coresight-etb10", "arm,primecell";
+		- "arm,coresight-tpiu", "arm,primecell";
+		- "arm,coresight-tmc", "arm,primecell";
+		- "arm,coresight-funnel", "arm,primecell";
+		- "arm,coresight-etm3x", "arm,primecell";
+
+	* reg: physical base address and length of the register
+	  set(s) of the component.
+
+	* clocks: the clock associated to this component.
+
+	* clock-names: the name of the clock as referenced by the code.
+	  Since we are using the AMBA framework, the name should be
+	  "apb_pclk".
+
+	* port or ports: The representation of the component's port
+	  layout using the generic DT graph presentation found in
+	  "bindings/graph.txt".
+
+* Required properties for devices that don't show up on the AMBA bus, such as
+  non-configurable replicators:
+
+	* compatible: Currently supported value is (note the absence of the
+	  AMBA markee):
+		- "arm,coresight-replicator"
+
+	* id: a unique number that will identify this replicator.
+
+	* port or ports: same as above.
+
+* Optional properties for ETM/PTMs:
+
+	* arm,cp14: must be present if the system accesses ETM/PTM management
+	  registers via co-processor 14.
+
+	* cpu: the cpu phandle this ETM/PTM is affined to. When omitted the
+	  source is considered to belong to CPU0.
+
+* Optional property for TMC:
+
+	* arm,buffer-size: size of contiguous buffer space for TMC ETR
+	 (embedded trace router)
+
+
+Example:
+
+1. Sinks
+	etb@20010000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0x20010000 0 0x1000>;
+
+		coresight-default-sink;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			etb_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port0>;
+			};
+		};
+	};
+
+	tpiu@20030000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0x20030000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			tpiu_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+2. Links
+	replicator {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-replicator";
+		/* this will show up in debugfs as "0.replicator" */
+		id = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&etb_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&funnel_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@20040000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0x20040000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel output port */
+			port@0 {
+				reg = <0>;
+				funnel_out_port0: endpoint {
+					remote-endpoint =
+							<&replicator_in_port0>;
+				};
+			};
+
+			/* funnel input ports */
+			port@1 {
+				reg = <0>;
+				funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm0_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				funnel_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm1_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <2>;
+				funnel_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+		};
+	};
+
+3. Sources
+	ptm@2201c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201c000 0 0x1000>;
+
+		cpu = <&cpu0>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			ptm0_out_port: endpoint {
+				remote-endpoint = <&funnel_in_port0>;
+			};
+		};
+	};
+
+	ptm@2201d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201d000 0 0x1000>;
+
+		cpu = <&cpu1>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			ptm1_out_port: endpoint {
+				remote-endpoint = <&funnel_in_port1>;
+			};
+		};
+	};