diff --git a/arch/arm/mach-s3c/mach-gta02.c b/arch/arm/mach-s3c/mach-gta02.c index abfdce765525..d50a81d85ae1 100644 --- a/arch/arm/mach-s3c/mach-gta02.c +++ b/arch/arm/mach-s3c/mach-gta02.c @@ -421,7 +421,14 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = { /* Get PMU to set USB current limit accordingly. */ static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = { .vbus_draw = gta02_udc_vbus_draw, - .pullup_pin = GTA02_GPIO_USB_PULLUP, +}; + +static struct gpiod_lookup_table gta02_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOB", 9, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; /* USB */ @@ -555,6 +562,7 @@ static void __init gta02_machine_init(void) s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE); + gpiod_add_lookup_table(>a02_udc_gpio_table); gpiod_add_lookup_table(>a02_audio_gpio_table); gpiod_add_lookup_table(>a02_mmc_gpio_table); platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices)); diff --git a/arch/arm/mach-s3c/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c index 032b18837855..83ac6cfdb1d8 100644 --- a/arch/arm/mach-s3c/mach-h1940.c +++ b/arch/arm/mach-s3c/mach-h1940.c @@ -167,9 +167,15 @@ static struct gpio_chip h1940_latch_gpiochip = { }; static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = { - .vbus_pin = S3C2410_GPG(5), - .vbus_pin_inverted = 1, - .pullup_pin = H1940_LATCH_USB_DP, +}; + +static struct gpiod_lookup_table h1940_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("H1940_LATCH", 7, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = { @@ -725,6 +731,7 @@ static void __init h1940_init(void) u32 tmp; s3c24xx_fb_set_platdata(&h1940_fb_info); + gpiod_add_lookup_table(&h1940_udc_gpio_table); gpiod_add_lookup_table(&h1940_mmc_gpio_table); gpiod_add_lookup_table(&h1940_audio_gpio_table); gpiod_add_lookup_table(&h1940_bat_gpio_table); diff --git a/arch/arm/mach-s3c/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c index e32773175944..16859bb3bb13 100644 --- a/arch/arm/mach-s3c/mach-jive.c +++ b/arch/arm/mach-s3c/mach-jive.c @@ -493,7 +493,14 @@ static struct platform_device *jive_devices[] __initdata = { }; static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = { - .vbus_pin = S3C2410_GPG(1), /* detect is on GPG1 */ +}; + +static struct gpiod_lookup_table jive_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH), + { }, + }, }; /* Jive power management device */ @@ -669,6 +676,7 @@ static void __init jive_machine_init(void) pm_power_off = jive_power_off; + gpiod_add_lookup_table(&jive_udc_gpio_table); gpiod_add_lookup_table(&jive_lcdspi_gpiod_table); gpiod_add_lookup_table(&jive_wm8750_gpiod_table); platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices)); diff --git a/arch/arm/mach-s3c/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c index a6d17ffcdba1..283be70ca622 100644 --- a/arch/arm/mach-s3c/mach-mini2440.c +++ b/arch/arm/mach-s3c/mach-mini2440.c @@ -93,9 +93,15 @@ static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = { /* USB device UDC support */ static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = { - .pullup_pin = S3C2410_GPC(5), }; +static struct gpiod_lookup_table mini2440_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOC", 5, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, +}; /* LCD timing and setup */ @@ -755,6 +761,7 @@ static void __init mini2440_init(void) s3c24xx_fb_set_platdata(&mini2440_fb_info); } + gpiod_add_lookup_table(&mini2440_udc_gpio_table); s3c24xx_udc_set_platdata(&mini2440_udc_cfg); gpiod_add_lookup_table(&mini2440_mmc_gpio_table); s3c24xx_mci_set_platdata(&mini2440_mmc_cfg); diff --git a/arch/arm/mach-s3c/mach-n30.c b/arch/arm/mach-s3c/mach-n30.c index 75f5dc6351a1..90122fc6b2aa 100644 --- a/arch/arm/mach-s3c/mach-n30.c +++ b/arch/arm/mach-s3c/mach-n30.c @@ -84,9 +84,15 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = { }; static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = { - .vbus_pin = S3C2410_GPG(1), - .vbus_pin_inverted = 0, - .pullup_pin = S3C2410_GPB(3), +}; + +static struct gpiod_lookup_table n30_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("GPIOB", 3, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct gpio_keys_button n30_buttons[] = { @@ -595,6 +601,7 @@ static void __init n30_init(void) WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power")); s3c24xx_fb_set_platdata(&n30_fb_info); + gpiod_add_lookup_table(&n30_udc_gpio_table); s3c24xx_udc_set_platdata(&n30_udc_cfg); gpiod_add_lookup_table(&n30_mci_gpio_table); s3c24xx_mci_set_platdata(&n30_mci_cfg); diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c index 7a3e7c0a6484..d8c49e562660 100644 --- a/arch/arm/mach-s3c/mach-rx1950.c +++ b/arch/arm/mach-s3c/mach-rx1950.c @@ -643,9 +643,15 @@ static struct s3c2410_platform_nand rx1950_nand_info = { }; static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = { - .vbus_pin = S3C2410_GPG(5), - .vbus_pin_inverted = 1, - .pullup_pin = S3C2410_GPJ(5), +}; + +static struct gpiod_lookup_table rx1950_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("GPIOJ", 5, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = { @@ -847,6 +853,7 @@ static void __init rx1950_init_machine(void) gpio_direction_output(S3C2410_GPJ(6), 0); pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup)); + gpiod_add_lookup_table(&rx1950_udc_gpio_table); gpiod_add_lookup_table(&rx1950_audio_gpio_table); gpiod_add_lookup_table(&rx1950_bat_gpio_table); /* Configure the I2S pins (GPE0...GPE4) in correct mode */ diff --git a/arch/arm/mach-s3c/mach-smdk2413.c b/arch/arm/mach-s3c/mach-smdk2413.c index f1f0ec174579..2b4e20aaa346 100644 --- a/arch/arm/mach-s3c/mach-smdk2413.c +++ b/arch/arm/mach-s3c/mach-smdk2413.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include #include @@ -74,9 +74,15 @@ static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = { static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = { - .pullup_pin = S3C2410_GPF(2), }; +static struct gpiod_lookup_table smdk2413_udc_gpio_table = { + .dev_id = "s3c2410-usbgadget", + .table = { + GPIO_LOOKUP("GPIOF", 2, "pullup", GPIO_ACTIVE_HIGH), + { }, + }, +}; static struct platform_device *smdk2413_devices[] __initdata = { &s3c_device_ohci, @@ -115,7 +121,7 @@ static void __init smdk2413_machine_init(void) S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, 0x0); - + gpiod_add_lookup_table(&smdk2413_udc_gpio_table); s3c24xx_udc_set_platdata(&smdk2413_udc_cfg); s3c_i2c0_set_platdata(NULL); /* Configure the I2S pins (GPE0...GPE4) in correct mode */ diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c index c6625aeb7bca..8c57b191e52b 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include @@ -1419,8 +1419,7 @@ static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on) { dprintk(DEBUG_NORMAL, "%s()\n", __func__); - if (udc_info && (udc_info->udc_command || - gpio_is_valid(udc_info->pullup_pin))) { + if (udc_info && (udc_info->udc_command || udc->pullup_gpiod)) { if (is_on) s3c2410_udc_enable(udc); @@ -1467,9 +1466,7 @@ static irqreturn_t s3c2410_udc_vbus_irq(int irq, void *_dev) dprintk(DEBUG_NORMAL, "%s()\n", __func__); - value = gpio_get_value(udc_info->vbus_pin) ? 1 : 0; - if (udc_info->vbus_pin_inverted) - value = !value; + value = gpiod_get_value(dev->vbus_gpiod); if (value != dev->vbus) s3c2410_udc_vbus_session(&dev->gadget, value); @@ -1504,14 +1501,15 @@ static const struct usb_gadget_ops s3c2410_ops = { .udc_stop = s3c2410_udc_stop, }; -static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd) +static void s3c2410_udc_command(struct s3c2410_udc *udc, + enum s3c2410_udc_cmd_e cmd) { if (!udc_info) return; if (udc_info->udc_command) { udc_info->udc_command(cmd); - } else if (gpio_is_valid(udc_info->pullup_pin)) { + } else if (udc->pullup_gpiod) { int value; switch (cmd) { @@ -1524,9 +1522,8 @@ static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd) default: return; } - value ^= udc_info->pullup_pin_inverted; - gpio_set_value(udc_info->pullup_pin, value); + gpiod_set_value(udc->pullup_gpiod, value); } } @@ -1551,7 +1548,7 @@ static void s3c2410_udc_disable(struct s3c2410_udc *dev) udc_write(0x1F, S3C2410_UDC_EP_INT_REG); /* Good bye, cruel world */ - s3c2410_udc_command(S3C2410_UDC_P_DISABLE); + s3c2410_udc_command(dev, S3C2410_UDC_P_DISABLE); /* Set speed to unknown */ dev->gadget.speed = USB_SPEED_UNKNOWN; @@ -1613,7 +1610,7 @@ static void s3c2410_udc_enable(struct s3c2410_udc *dev) udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_EN_REG); /* time to say "hello, world" */ - s3c2410_udc_command(S3C2410_UDC_P_ENABLE); + s3c2410_udc_command(dev, S3C2410_UDC_P_ENABLE); } static int s3c2410_udc_start(struct usb_gadget *g, @@ -1802,14 +1799,15 @@ static int s3c2410_udc_probe(struct platform_device *pdev) dev_dbg(dev, "got irq %i\n", irq_usbd); - if (udc_info && udc_info->vbus_pin > 0) { - retval = gpio_request(udc_info->vbus_pin, "udc vbus"); - if (retval < 0) { - dev_err(dev, "cannot claim vbus pin\n"); - goto err_int; - } + udc->vbus_gpiod = gpiod_get_optional(dev, "vbus", GPIOD_IN); + if (IS_ERR(udc->vbus_gpiod)) { + retval = PTR_ERR(udc->vbus_gpiod); + goto err_int; + } + if (udc->vbus_gpiod) { + gpiod_set_consumer_name(udc->vbus_gpiod, "udc vbus"); - irq = gpio_to_irq(udc_info->vbus_pin); + irq = gpiod_to_irq(udc->vbus_gpiod); if (irq < 0) { dev_err(dev, "no irq for gpio vbus pin\n"); retval = irq; @@ -1833,16 +1831,12 @@ static int s3c2410_udc_probe(struct platform_device *pdev) udc->vbus = 1; } - if (udc_info && !udc_info->udc_command && - gpio_is_valid(udc_info->pullup_pin)) { - - retval = gpio_request_one(udc_info->pullup_pin, - udc_info->vbus_pin_inverted ? - GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, - "udc pullup"); - if (retval) - goto err_vbus_irq; + udc->pullup_gpiod = gpiod_get_optional(dev, "pullup", GPIOD_OUT_LOW); + if (IS_ERR(udc->pullup_gpiod)) { + retval = PTR_ERR(udc->pullup_gpiod); + goto err_vbus_irq; } + gpiod_set_consumer_name(udc->pullup_gpiod, "udc pullup"); retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget); if (retval) @@ -1856,15 +1850,10 @@ static int s3c2410_udc_probe(struct platform_device *pdev) return 0; err_add_udc: - if (udc_info && !udc_info->udc_command && - gpio_is_valid(udc_info->pullup_pin)) - gpio_free(udc_info->pullup_pin); err_vbus_irq: - if (udc_info && udc_info->vbus_pin > 0) - free_irq(gpio_to_irq(udc_info->vbus_pin), udc); + if (udc->vbus_gpiod) + free_irq(gpiod_to_irq(udc->vbus_gpiod), udc); err_gpio_claim: - if (udc_info && udc_info->vbus_pin > 0) - gpio_free(udc_info->vbus_pin); err_int: free_irq(irq_usbd, udc); err_udc_clk: @@ -1885,7 +1874,6 @@ err_usb_bus_clk: static int s3c2410_udc_remove(struct platform_device *pdev) { struct s3c2410_udc *udc = platform_get_drvdata(pdev); - unsigned int irq; dev_dbg(&pdev->dev, "%s()\n", __func__); @@ -1895,14 +1883,8 @@ static int s3c2410_udc_remove(struct platform_device *pdev) usb_del_gadget_udc(&udc->gadget); debugfs_remove(debugfs_lookup("registers", s3c2410_udc_debugfs_root)); - if (udc_info && !udc_info->udc_command && - gpio_is_valid(udc_info->pullup_pin)) - gpio_free(udc_info->pullup_pin); - - if (udc_info && udc_info->vbus_pin > 0) { - irq = gpio_to_irq(udc_info->vbus_pin); - free_irq(irq, udc); - } + if (udc->vbus_gpiod) + free_irq(gpiod_to_irq(udc->vbus_gpiod), udc); free_irq(irq_usbd, udc); @@ -1926,14 +1908,18 @@ static int s3c2410_udc_remove(struct platform_device *pdev) static int s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message) { - s3c2410_udc_command(S3C2410_UDC_P_DISABLE); + struct s3c2410_udc *udc = platform_get_drvdata(pdev); + + s3c2410_udc_command(udc, S3C2410_UDC_P_DISABLE); return 0; } static int s3c2410_udc_resume(struct platform_device *pdev) { - s3c2410_udc_command(S3C2410_UDC_P_ENABLE); + struct s3c2410_udc *udc = platform_get_drvdata(pdev); + + s3c2410_udc_command(udc, S3C2410_UDC_P_ENABLE); return 0; } diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h index 135a5bff3c74..cdbf202e5ee8 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.h +++ b/drivers/usb/gadget/udc/s3c2410_udc.h @@ -83,6 +83,9 @@ struct s3c2410_udc { u32 port_status; int ep0state; + struct gpio_desc *vbus_gpiod; + struct gpio_desc *pullup_gpiod; + unsigned got_irq : 1; unsigned req_std : 1; diff --git a/include/linux/platform_data/usb-s3c2410_udc.h b/include/linux/platform_data/usb-s3c2410_udc.h index 07394819d03b..c0fbe1fe3426 100644 --- a/include/linux/platform_data/usb-s3c2410_udc.h +++ b/include/linux/platform_data/usb-s3c2410_udc.h @@ -22,12 +22,6 @@ enum s3c2410_udc_cmd_e { struct s3c2410_udc_mach_info { void (*udc_command)(enum s3c2410_udc_cmd_e); void (*vbus_draw)(unsigned int ma); - - unsigned int pullup_pin; - unsigned int pullup_pin_inverted; - - unsigned int vbus_pin; - unsigned char vbus_pin_inverted; }; extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);