diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi new file mode 100644 index 000000000000..5b5df63a21c8 --- /dev/null +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -0,0 +1,386 @@ +/* + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include + +#include "skeleton.dtsi" + +/ { + compatible = "ti,dm816"; + interrupt-parent = <&intc>; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + ethernet0 = ð0; + ethernet1 = ð1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0>; + }; + }; + + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + + /* + * The soc node represents the soc top level view. It is used for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap3-mpu"; + ti,hwmods = "mpu"; + }; + }; + + dm816x_pinmux: pinmux@44e10800 { + compatible = "pinctrl-single"; + reg = <0x48140800 0x50a>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xf>; + }; + + /* + * XXX: Use a flat representation of the dm816x interconnect. + * The real dm816x interconnect network is quite complex. Since + * it will not bring real advantage to represent that in DT + * for the moment, just use a fake OCP bus entry to represent + * the whole bus hierarchy. + */ + ocp { + compatible = "ti,omap3-l3-smx", "simple-bus"; + reg = <0x44000000 0x10000>; + interrupts = <9 10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + prcm: prcm@48180000 { + compatible = "ti,dm816-prcm"; + reg = <0x48180000 0x4000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + + scrm: scrm@48140000 { + compatible = "ti,dm816-scrm"; + reg = <0x48140000 0x21000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48140000 0x21000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + + cm: syscon@44e10000 { + compatible = "ti,am33xx-controlmodule", "syscon"; + reg = <0x44e10000 0x800>; + }; + + edma: edma@49000000 { + compatible = "ti,edma3"; + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3"; + reg = <0x49000000 0x10000>, + <0x44e10f90 0x40>; + interrupts = <12 13 14>; + #dma-cells = <1>; + }; + + elm: elm@48080000 { + compatible = "ti,816-elm"; + ti,hwmods = "elm"; + reg = <0x48080000 0x2000>; + interrupts = <4>; + }; + + gpio1: gpio@48032000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio1"; + reg = <0x48032000 0x1000>; + interrupts = <97>; + }; + + gpio2: gpio@4804c000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio2"; + reg = <0x4804c000 0x1000>; + interrupts = <99>; + }; + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x50000000 0x2000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <100>; + gpmc,num-cs = <6>; + gpmc,num-waitpins = <2>; + }; + + i2c1: i2c@48028000 { + compatible = "ti,omap4-i2c"; + ti,hwmods = "i2c1"; + reg = <0x48028000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <70>; + dmas = <&edma 58 &edma 59>; + dma-names = "tx", "rx"; + }; + + i2c2: i2c@4802a000 { + compatible = "ti,omap4-i2c"; + ti,hwmods = "i2c2"; + reg = <0x4802a000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <71>; + dmas = <&edma 60 &edma 61>; + dma-names = "tx", "rx"; + }; + + intc: interrupt-controller@48200000 { + compatible = "ti,dm816-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x48200000 0x1000>; + }; + + mailbox: mailbox@480c8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480c8000 0x2000>; + interrupts = <77>; + ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <0 0 0>; + }; + }; + + mdio: mdio@4a100800 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4a100800 0x100>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + phy0: ethernet-phy@0 { + reg = <1>; + }; + phy1: ethernet-phy@1 { + reg = <2>; + }; + }; + + eth0: ethernet@4a100000 { + compatible = "ti,dm816-emac"; + ti,hwmods = "emac0"; + reg = <0x4a100000 0x800 + 0x4a100900 0x3700>; + clocks = <&sysclk24_ck>; + ti,davinci-ctrl-reg-offset = <0>; + ti,davinci-ctrl-mod-reg-offset = <0x900>; + ti,davinci-ctrl-ram-offset = <0x2000>; + ti,davinci-ctrl-ram-size = <0x2000>; + interrupts = <40 41 42 43>; + phy-handle = <&phy0>; + }; + + eth1: ethernet@4a120000 { + compatible = "ti,dm816-emac"; + ti,hwmods = "emac1"; + reg = <0x4a120000 0x4000>; + clocks = <&sysclk24_ck>; + ti,davinci-ctrl-reg-offset = <0>; + ti,davinci-ctrl-mod-reg-offset = <0x900>; + ti,davinci-ctrl-ram-offset = <0x2000>; + ti,davinci-ctrl-ram-size = <0x2000>; + interrupts = <44 45 46 47>; + phy-handle = <&phy1>; + }; + + mcspi1: spi@48030000 { + compatible = "ti,omap4-mcspi"; + reg = <0x48030000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <65>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi1"; + dmas = <&edma 16 &edma 17 + &edma 18 &edma 19>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + mmc1: mmc@48060000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x48060000 0x11000>; + ti,hwmods = "mmc1"; + interrupts = <64>; + dmas = <&edma 24 &edma 25>; + dma-names = "tx", "rx"; + }; + + timer1: timer@4802e000 { + compatible = "ti,dm816-timer"; + reg = <0x4802e000 0x2000>; + interrupts = <67>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48040000 { + compatible = "ti,dm816-timer"; + reg = <0x48040000 0x2000>; + interrupts = <68>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48042000 { + compatible = "ti,dm816-timer"; + reg = <0x48042000 0x2000>; + interrupts = <69>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48044000 { + compatible = "ti,dm816-timer"; + reg = <0x48044000 0x2000>; + interrupts = <92>; + ti,hwmods = "timer4"; + }; + + timer5: timer@48046000 { + compatible = "ti,dm816-timer"; + reg = <0x48046000 0x2000>; + interrupts = <93>; + ti,hwmods = "timer5"; + }; + + timer6: timer@48048000 { + compatible = "ti,dm816-timer"; + reg = <0x48048000 0x2000>; + interrupts = <94>; + ti,hwmods = "timer6"; + }; + + timer7: timer@4804a000 { + compatible = "ti,dm816-timer"; + reg = <0x4804a000 0x2000>; + interrupts = <95>; + ti,hwmods = "timer7"; + }; + + uart1: uart@48020000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart1"; + reg = <0x48020000 0x2000>; + clock-frequency = <48000000>; + interrupts = <72>; + dmas = <&edma 26 &edma 27>; + dma-names = "tx", "rx"; + }; + + uart2: uart@48022000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart2"; + reg = <0x48022000 0x2000>; + clock-frequency = <48000000>; + interrupts = <73>; + dmas = <&edma 28 &edma 29>; + dma-names = "tx", "rx"; + }; + + uart3: uart@48024000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart3"; + reg = <0x48024000 0x2000>; + clock-frequency = <48000000>; + interrupts = <74>; + dmas = <&edma 30 &edma 31>; + dma-names = "tx", "rx"; + }; + + /* NOTE: USB needs a transceiver driver for phys to work */ + usb: usb_otg_hs@47401000 { + compatible = "ti,am33xx-usb"; + reg = <0x47401000 0x400000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + ti,hwmods = "usb_otg_hs"; + + usb0: usb@47401000 { + compatible = "ti,musb-am33xx"; + reg = <0x47401400 0x400 + 0x47401000 0x200>; + reg-names = "mc", "control"; + interrupts = <18>; + interrupt-names = "mc"; + dr_mode = "otg"; + mentor,multipoint = <1>; + mentor,num-eps = <16>; + mentor,ram-bits = <12>; + mentor,power = <500>; + }; + + usb1: usb@47401800 { + compatible = "ti,musb-am33xx"; + status = "disabled"; + reg = <0x47401c00 0x400 + 0x47401800 0x200>; + reg-names = "mc", "control"; + interrupts = <19>; + interrupt-names = "mc"; + dr_mode = "otg"; + mentor,multipoint = <1>; + mentor,num-eps = <16>; + mentor,ram-bits = <12>; + mentor,power = <500>; + }; + }; + + wd_timer2: wd_timer@480c2000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer"; + reg = <0x480c2000 0x1000>; + interrupts = <0>; + }; + }; +}; +