From 774514bf977377c9137640a0310bd64eed0f7323 Mon Sep 17 00:00:00 2001 From: Yann Gautier Date: Thu, 25 Feb 2021 15:54:54 +0100 Subject: [PATCH] mmc: mmci: Add MMC_CAP_NEED_RSP_BUSY for the stm32 variants An issue has been observed on STM32MP157C-EV1 board, with an erase command with secure erase argument, ending up waiting for ~4 hours before timeout. The requested busy timeout from the mmc core ends up with 14784000ms (~4 hours), but the supported host->max_busy_timeout is 86767ms, which leads to that the core switch to use an R1 response in favor of the R1B and polls for busy with the host->card_busy() ops. In this case the polling doesn't work as expected, as we never detects that the card stops signaling busy, which leads to the following message: mmc1: Card stuck being busy! __mmc_poll_for_busy The problem boils done to that the stm32 variants can't use R1 responses in favor of R1B responses, as it leads to an internal state machine in the controller to get stuck. To continue to process requests, it would need to be reset. To fix this problem, let's set MMC_CAP_NEED_RSP_BUSY for the stm32 variant, which prevent the mmc core from switching to R1 responses. Additionally, let's cap the cmd->busy_timeout to the host->max_busy_timeout, thus rely on 86767ms to be sufficient (~66 seconds was need for this test case). Fixes: 94fe2580a2f3 ("mmc: core: Enable erase/discard/trim support for all mmc hosts") Signed-off-by: Yann Gautier Link: https://lore.kernel.org/r/20210225145454.12780-1-yann.gautier@foss.st.com Cc: stable@vger.kernel.org [Ulf: Simplified the code and extended the commit message] Signed-off-by: Ulf Hansson --- drivers/mmc/host/mmci.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 17dbc81c221e..984d35055156 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1242,7 +1242,11 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c) if (!cmd->busy_timeout) cmd->busy_timeout = 10 * MSEC_PER_SEC; - clks = (unsigned long long)cmd->busy_timeout * host->cclk; + if (cmd->busy_timeout > host->mmc->max_busy_timeout) + clks = (unsigned long long)host->mmc->max_busy_timeout * host->cclk; + else + clks = (unsigned long long)cmd->busy_timeout * host->cclk; + do_div(clks, MSEC_PER_SEC); writel_relaxed(clks, host->base + MMCIDATATIMER); } @@ -2151,6 +2155,10 @@ static int mmci_probe(struct amba_device *dev, mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; } + /* Variants with mandatory busy timeout in HW needs R1B responses. */ + if (variant->busy_timeout) + mmc->caps |= MMC_CAP_NEED_RSP_BUSY; + /* Prepare a CMD12 - needed to clear the DPSM on some variants. */ host->stop_abort.opcode = MMC_STOP_TRANSMISSION; host->stop_abort.arg = 0;