mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 21:21:41 +00:00
hwmon: (ina2xx) Add support for INA260
INA260 is similar to other chips of the series, except it has an internal shunt resistor. The calibration register is therefore not present. Also, the current register address was changed, though that does not matter for the driver since the shunt voltage register (which is now the current register) value is already used to read the current. Cc: Loic Guegan <loic.guegan@mailbox.org> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Guenter Roeck
parent
de0da6ae19
commit
70fb84a109
@ -53,6 +53,16 @@ Supported chips:
|
||||
|
||||
https://www.ti.com/
|
||||
|
||||
* Texas Instruments INA260
|
||||
|
||||
Prefix: 'ina260'
|
||||
|
||||
Addresses: I2C 0x40 - 0x4f
|
||||
|
||||
Datasheet: Publicly available at the Texas Instruments website
|
||||
|
||||
https://www.ti.com/
|
||||
|
||||
Author: Lothar Felten <lothar.felten@gmail.com>
|
||||
|
||||
Description
|
||||
@ -72,6 +82,9 @@ INA230 and INA231 are high or low side current shunt and power monitors
|
||||
with an I2C interface. The chips monitor both a shunt voltage drop and
|
||||
bus supply voltage.
|
||||
|
||||
INA260 is a high or low side current and power monitor with integrated shunt
|
||||
resistor.
|
||||
|
||||
The shunt value in micro-ohms can be set via platform data or device tree at
|
||||
compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
|
||||
refer to the Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml for bindings
|
||||
@ -87,16 +100,16 @@ The actual programmed interval may vary from the desired value.
|
||||
General sysfs entries
|
||||
---------------------
|
||||
|
||||
======================= ===============================
|
||||
======================= ===============================================
|
||||
in0_input Shunt voltage(mV) channel
|
||||
in1_input Bus voltage(mV) channel
|
||||
curr1_input Current(mA) measurement channel
|
||||
power1_input Power(uW) measurement channel
|
||||
shunt_resistor Shunt resistance(uOhm) channel
|
||||
======================= ===============================
|
||||
shunt_resistor Shunt resistance(uOhm) channel (not for ina260)
|
||||
======================= ===============================================
|
||||
|
||||
Sysfs entries for ina226, ina230 and ina231 only
|
||||
------------------------------------------------
|
||||
Additional sysfs entries for ina226, ina230, ina231, and ina260
|
||||
---------------------------------------------------------------
|
||||
|
||||
======================= ====================================================
|
||||
curr1_lcrit Critical low current
|
||||
|
||||
@ -2167,11 +2167,12 @@ config SENSORS_INA2XX
|
||||
select REGMAP_I2C
|
||||
help
|
||||
If you say yes here you get support for INA219, INA220, INA226,
|
||||
INA230, and INA231 power monitor chips.
|
||||
INA230, INA231, and INA260 power monitor chips.
|
||||
|
||||
The INA2xx driver is configured for the default configuration of
|
||||
the part as described in the datasheet.
|
||||
Default value for Rshunt is 10 mOhms.
|
||||
Default value for Rshunt is 10 mOhms except for INA260 which has an
|
||||
internal 2 mOhm shunt resistor.
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called ina2xx.
|
||||
|
||||
|
||||
@ -56,12 +56,14 @@
|
||||
/* settings - depend on use case */
|
||||
#define INA219_CONFIG_DEFAULT 0x399F /* PGA=8 */
|
||||
#define INA226_CONFIG_DEFAULT 0x4527 /* averages=16 */
|
||||
#define INA260_CONFIG_DEFAULT 0x6527 /* averages=16 */
|
||||
|
||||
/* worst case is 68.10 ms (~14.6Hz, ina219) */
|
||||
#define INA2XX_CONVERSION_RATE 15
|
||||
#define INA2XX_MAX_DELAY 69 /* worst case delay in ms */
|
||||
|
||||
#define INA2XX_RSHUNT_DEFAULT 10000
|
||||
#define INA260_RSHUNT 2000
|
||||
|
||||
/* bit mask for reading the averaging setting in the configuration register */
|
||||
#define INA226_AVG_RD_MASK GENMASK(11, 9)
|
||||
@ -125,11 +127,12 @@ static const struct regmap_config ina2xx_regmap_config = {
|
||||
.writeable_reg = ina2xx_writeable_reg,
|
||||
};
|
||||
|
||||
enum ina2xx_ids { ina219, ina226 };
|
||||
enum ina2xx_ids { ina219, ina226, ina260 };
|
||||
|
||||
struct ina2xx_config {
|
||||
u16 config_default;
|
||||
bool has_alerts; /* chip supports alerts and limits */
|
||||
bool has_ishunt; /* chip has internal shunt resistor */
|
||||
int calibration_value;
|
||||
int shunt_div;
|
||||
int bus_voltage_shift;
|
||||
@ -157,6 +160,7 @@ static const struct ina2xx_config ina2xx_config[] = {
|
||||
.bus_voltage_lsb = 4000,
|
||||
.power_lsb_factor = 20,
|
||||
.has_alerts = false,
|
||||
.has_ishunt = false,
|
||||
},
|
||||
[ina226] = {
|
||||
.config_default = INA226_CONFIG_DEFAULT,
|
||||
@ -166,6 +170,16 @@ static const struct ina2xx_config ina2xx_config[] = {
|
||||
.bus_voltage_lsb = 1250,
|
||||
.power_lsb_factor = 25,
|
||||
.has_alerts = true,
|
||||
.has_ishunt = false,
|
||||
},
|
||||
[ina260] = {
|
||||
.config_default = INA260_CONFIG_DEFAULT,
|
||||
.shunt_div = 400,
|
||||
.bus_voltage_shift = 0,
|
||||
.bus_voltage_lsb = 1250,
|
||||
.power_lsb_factor = 8,
|
||||
.has_alerts = true,
|
||||
.has_ishunt = true,
|
||||
},
|
||||
};
|
||||
|
||||
@ -257,6 +271,15 @@ static int ina2xx_read_init(struct device *dev, int reg, long *val)
|
||||
unsigned int regval;
|
||||
int ret, retry;
|
||||
|
||||
if (data->config->has_ishunt) {
|
||||
/* No calibration needed */
|
||||
ret = regmap_read(regmap, reg, ®val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
*val = ina2xx_get_value(data, reg, regval);
|
||||
return 0;
|
||||
}
|
||||
|
||||
for (retry = 5; retry; retry--) {
|
||||
ret = regmap_read(regmap, reg, ®val);
|
||||
if (ret < 0)
|
||||
@ -686,7 +709,7 @@ static umode_t ina2xx_is_visible(const void *_data, enum hwmon_sensor_types type
|
||||
case hwmon_chip:
|
||||
switch (attr) {
|
||||
case hwmon_chip_update_interval:
|
||||
if (chip == ina226)
|
||||
if (chip == ina226 || chip == ina260)
|
||||
return 0644;
|
||||
break;
|
||||
default:
|
||||
@ -795,7 +818,9 @@ static int ina2xx_init(struct device *dev, struct ina2xx_data *data)
|
||||
u32 shunt;
|
||||
int ret;
|
||||
|
||||
if (device_property_read_u32(dev, "shunt-resistor", &shunt) < 0)
|
||||
if (data->config->has_ishunt)
|
||||
shunt = INA260_RSHUNT;
|
||||
else if (device_property_read_u32(dev, "shunt-resistor", &shunt) < 0)
|
||||
shunt = INA2XX_RSHUNT_DEFAULT;
|
||||
|
||||
ret = ina2xx_set_shunt(data, shunt);
|
||||
@ -815,6 +840,9 @@ static int ina2xx_init(struct device *dev, struct ina2xx_data *data)
|
||||
FIELD_PREP(INA226_ALERT_POLARITY, active_high));
|
||||
}
|
||||
|
||||
if (data->config->has_ishunt)
|
||||
return 0;
|
||||
|
||||
/*
|
||||
* Calibration register is set to the best value, which eliminates
|
||||
* truncation errors on calculating current register in hardware.
|
||||
@ -860,7 +888,8 @@ static int ina2xx_probe(struct i2c_client *client)
|
||||
|
||||
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
|
||||
data, &ina2xx_chip_info,
|
||||
ina2xx_groups);
|
||||
data->config->has_ishunt ?
|
||||
NULL : ina2xx_groups);
|
||||
if (IS_ERR(hwmon_dev))
|
||||
return PTR_ERR(hwmon_dev);
|
||||
|
||||
@ -876,6 +905,7 @@ static const struct i2c_device_id ina2xx_id[] = {
|
||||
{ "ina226", ina226 },
|
||||
{ "ina230", ina226 },
|
||||
{ "ina231", ina226 },
|
||||
{ "ina260", ina260 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, ina2xx_id);
|
||||
@ -901,6 +931,10 @@ static const struct of_device_id __maybe_unused ina2xx_of_match[] = {
|
||||
.compatible = "ti,ina231",
|
||||
.data = (void *)ina226
|
||||
},
|
||||
{
|
||||
.compatible = "ti,ina260",
|
||||
.data = (void *)ina260
|
||||
},
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ina2xx_of_match);
|
||||
|
||||
Loading…
Reference in New Issue
Block a user