ASoC: Fixes for v6.12

The biggest set of changes here is Hans' fixes and quirks for various
 Baytrail based platforms with RT5640 CODECs, and there's one core fix
 for a missed length assignment for __counted_by() checking.  Otherwise
 it's small device specific fixes, several of them in the DT bindings.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmciNo8ACgkQJNaLcl1U
 h9CNfAf/bw39l2d16DVOdzq1gv4I0BUX7M/wTsLRujnDCv8F7qZn3BhhPEeEiLDP
 3wa8MzwcnXGI7rM5kzPKUERI352N7FzWUpSz6r7QtszPpttzx8HSxcHuuU68msSo
 oqrUmEqA+1sFuDwsMMm85uUpeHHFQtgEhtMxMafz9VxWhTqSQCfIoM62pAns2Xdq
 X3mSaovGIofWXszMjzf7tWrWfAAnzgvYjmOYNd7QwIpi/HZL9iAxw/orbLW6AZCm
 ZnrhiGxf5ZZeeaiZhEzdH7iktM1+WpvLihl1PUD8JcgCHW3CJud/OqtpXV+AeyHm
 p7dI0bb71g0RJ08pt+i64wxS6HA+Qg==
 =I/0i
 -----END PGP SIGNATURE-----

Merge tag 'asoc-fix-v6.12-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

The biggest set of changes here is Hans' fixes and quirks for various
Baytrail based platforms with RT5640 CODECs, and there's one core fix
for a missed length assignment for __counted_by() checking.  Otherwise
it's small device specific fixes, several of them in the DT bindings.

Documentation/devicetree/bindings/sound/rockchip,rk3308-codec.yaml

@@ -48,6 +48,10 @@ properties:
       - const: mclk_rx
       - const: hclk
 
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
   resets:
     maxItems: 1
 

sound/hda/intel-dsp-config.c

@@ -721,6 +721,10 @@ static const struct config_entry acpi_config_table[] = {
 #if IS_ENABLED(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI) || \
     IS_ENABLED(CONFIG_SND_SOC_SOF_BAYTRAIL)
 /* BayTrail */
+	{
+		.flags = FLAG_SST_OR_SOF_BYT,
+		.acpi_hid = "LPE0F28",
+	},
 	{
 		.flags = FLAG_SST_OR_SOF_BYT,
 		.acpi_hid = "80860F28",

sound/soc/codecs/cs42l51.c

@@ -747,8 +747,10 @@ int cs42l51_probe(struct device *dev, struct regmap *regmap)
 
 	cs42l51->reset_gpio = devm_gpiod_get_optional(dev, "reset",
 						      GPIOD_OUT_LOW);
-	if (IS_ERR(cs42l51->reset_gpio))
-		return PTR_ERR(cs42l51->reset_gpio);
+	if (IS_ERR(cs42l51->reset_gpio)) {
+		ret = PTR_ERR(cs42l51->reset_gpio);
+		goto error;
+	}
 
 	if (cs42l51->reset_gpio) {
 		dev_dbg(dev, "Release reset gpio\n");
@@ -780,6 +782,7 @@ int cs42l51_probe(struct device *dev, struct regmap *regmap)
 	return 0;
 
 error:
+	gpiod_set_value_cansleep(cs42l51->reset_gpio, 1);
 	regulator_bulk_disable(ARRAY_SIZE(cs42l51->supplies),
 			       cs42l51->supplies);
 	return ret;

sound/soc/codecs/rt5640.c

@@ -2419,10 +2419,20 @@ static irqreturn_t rt5640_jd_gpio_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static void rt5640_cancel_work(void *data)
+static void rt5640_disable_irq_and_cancel_work(void *data)
 {
 	struct rt5640_priv *rt5640 = data;
 
+	if (rt5640->jd_gpio_irq_requested) {
+		free_irq(rt5640->jd_gpio_irq, rt5640);
+		rt5640->jd_gpio_irq_requested = false;
+	}
+
+	if (rt5640->irq_requested) {
+		free_irq(rt5640->irq, rt5640);
+		rt5640->irq_requested = false;
+	}
+
 	cancel_delayed_work_sync(&rt5640->jack_work);
 	cancel_delayed_work_sync(&rt5640->bp_work);
 }
@@ -2463,13 +2473,7 @@ static void rt5640_disable_jack_detect(struct snd_soc_component *component)
 	if (!rt5640->jack)
 		return;
 
-	if (rt5640->jd_gpio_irq_requested)
-		free_irq(rt5640->jd_gpio_irq, rt5640);
-
-	if (rt5640->irq_requested)
-		free_irq(rt5640->irq, rt5640);
-
-	rt5640_cancel_work(rt5640);
+	rt5640_disable_irq_and_cancel_work(rt5640);
 
 	if (rt5640->jack->status & SND_JACK_MICROPHONE) {
 		rt5640_disable_micbias1_ovcd_irq(component);
@@ -2477,8 +2481,6 @@ static void rt5640_disable_jack_detect(struct snd_soc_component *component)
 		snd_soc_jack_report(rt5640->jack, 0, SND_JACK_BTN_0);
 	}
 
-	rt5640->jd_gpio_irq_requested = false;
-	rt5640->irq_requested = false;
 	rt5640->jd_gpio = NULL;
 	rt5640->jack = NULL;
 }
@@ -2798,7 +2800,8 @@ static int rt5640_suspend(struct snd_soc_component *component)
 	if (rt5640->jack) {
 		/* disable jack interrupts during system suspend */
 		disable_irq(rt5640->irq);
-		rt5640_cancel_work(rt5640);
+		cancel_delayed_work_sync(&rt5640->jack_work);
+		cancel_delayed_work_sync(&rt5640->bp_work);
 	}
 
 	snd_soc_component_force_bias_level(component, SND_SOC_BIAS_OFF);
@@ -3032,7 +3035,7 @@ static int rt5640_i2c_probe(struct i2c_client *i2c)
 	INIT_DELAYED_WORK(&rt5640->jack_work, rt5640_jack_work);
 
 	/* Make sure work is stopped on probe-error / remove */
-	ret = devm_add_action_or_reset(&i2c->dev, rt5640_cancel_work, rt5640);
+	ret = devm_add_action_or_reset(&i2c->dev, rt5640_disable_irq_and_cancel_work, rt5640);
 	if (ret)
 		return ret;
 

sound/soc/codecs/wcd937x.c

@@ -715,12 +715,17 @@ static int wcd937x_codec_enable_aux_pa(struct snd_soc_dapm_widget *w,
 	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
 	struct wcd937x_priv *wcd937x = snd_soc_component_get_drvdata(component);
 	int hph_mode = wcd937x->hph_mode;
+	u8 val;
 
 	switch (event) {
 	case SND_SOC_DAPM_PRE_PMU:
+		val = WCD937X_DIGITAL_PDM_WD_CTL2_EN |
+		      WCD937X_DIGITAL_PDM_WD_CTL2_TIMEOUT_SEL |
+		      WCD937X_DIGITAL_PDM_WD_CTL2_HOLD_OFF;
 		snd_soc_component_update_bits(component,
 					      WCD937X_DIGITAL_PDM_WD_CTL2,
-					      BIT(0), BIT(0));
+					      WCD937X_DIGITAL_PDM_WD_CTL2_MASK,
+					      val);
 		break;
 	case SND_SOC_DAPM_POST_PMU:
 		usleep_range(1000, 1010);
@@ -741,7 +746,8 @@ static int wcd937x_codec_enable_aux_pa(struct snd_soc_dapm_widget *w,
 					hph_mode);
 		snd_soc_component_update_bits(component,
 					      WCD937X_DIGITAL_PDM_WD_CTL2,
-					      BIT(0), 0x00);
+					      WCD937X_DIGITAL_PDM_WD_CTL2_MASK,
+					      0x00);
 		break;
 	}
 
@@ -2049,6 +2055,8 @@ static const struct snd_kcontrol_new wcd937x_snd_controls[] = {
 		       wcd937x_get_swr_port, wcd937x_set_swr_port),
 	SOC_SINGLE_EXT("HPHR Switch", WCD937X_HPH_R, 0, 1, 0,
 		       wcd937x_get_swr_port, wcd937x_set_swr_port),
+	SOC_SINGLE_EXT("LO Switch", WCD937X_LO, 0, 1, 0,
+		       wcd937x_get_swr_port, wcd937x_set_swr_port),
 
 	SOC_SINGLE_EXT("ADC1 Switch", WCD937X_ADC1, 1, 1, 0,
 		       wcd937x_get_swr_port, wcd937x_set_swr_port),

sound/soc/codecs/wcd937x.h

@@ -391,6 +391,10 @@
 #define WCD937X_DIGITAL_PDM_WD_CTL0		0x3465
 #define WCD937X_DIGITAL_PDM_WD_CTL1		0x3466
 #define WCD937X_DIGITAL_PDM_WD_CTL2		0x3467
+#define WCD937X_DIGITAL_PDM_WD_CTL2_HOLD_OFF	BIT(2)
+#define WCD937X_DIGITAL_PDM_WD_CTL2_TIMEOUT_SEL	BIT(1)
+#define WCD937X_DIGITAL_PDM_WD_CTL2_EN		BIT(0)
+#define WCD937X_DIGITAL_PDM_WD_CTL2_MASK	GENMASK(2, 0)
 #define WCD937X_DIGITAL_INTR_MODE		0x346A
 #define WCD937X_DIGITAL_INTR_MASK_0		0x346B
 #define WCD937X_DIGITAL_INTR_MASK_1		0x346C

sound/soc/intel/atom/sst/sst_acpi.c

@@ -125,6 +125,28 @@ static const struct sst_res_info bytcr_res_info = {
 	.acpi_ipc_irq_index = 0
 };
 
+/* For "LPE0F28" ACPI device found on some Android factory OS models */
+static const struct sst_res_info lpe8086_res_info = {
+	.shim_offset = 0x140000,
+	.shim_size = 0x000100,
+	.shim_phy_addr = SST_BYT_SHIM_PHY_ADDR,
+	.ssp0_offset = 0xa0000,
+	.ssp0_size = 0x1000,
+	.dma0_offset = 0x98000,
+	.dma0_size = 0x4000,
+	.dma1_offset = 0x9c000,
+	.dma1_size = 0x4000,
+	.iram_offset = 0x0c0000,
+	.iram_size = 0x14000,
+	.dram_offset = 0x100000,
+	.dram_size = 0x28000,
+	.mbox_offset = 0x144000,
+	.mbox_size = 0x1000,
+	.acpi_lpe_res_index = 1,
+	.acpi_ddr_index = 0,
+	.acpi_ipc_irq_index = 0
+};
+
 static struct sst_platform_info byt_rvp_platform_data = {
 	.probe_data = &byt_fwparse_info,
 	.ipc_info = &byt_ipc_info,
@@ -268,23 +290,46 @@ static int sst_acpi_probe(struct platform_device *pdev)
 		mach->pdata = &chv_platform_data;
 	pdata = mach->pdata;
 
+	if (!strcmp(id->id, "LPE0F28")) {
+		struct resource *rsrc;
+
+		/* Use regular BYT SST PCI VID:PID */
+		dev_id = 0x80860F28;
+		byt_rvp_platform_data.res_info = &lpe8086_res_info;
+
+		/*
+		 * The "LPE0F28" ACPI device has separate IO-mem resources for:
+		 * DDR, SHIM, MBOX, IRAM, DRAM, CFG
+		 * None of which covers the entire LPE base address range.
+		 * lpe8086_res_info.acpi_lpe_res_index points to the SHIM.
+		 * Patch this to cover the entire base address range as expected
+		 * by sst_platform_get_resources().
+		 */
+		rsrc = platform_get_resource(pdev, IORESOURCE_MEM,
+					     pdata->res_info->acpi_lpe_res_index);
+		if (!rsrc) {
+			dev_err(dev, "Invalid SHIM base\n");
+			return -EIO;
+		}
+		rsrc->start -= pdata->res_info->shim_offset;
+		rsrc->end = rsrc->start + 0x200000 - 1;
+	} else {
 		ret = kstrtouint(id->id, 16, &dev_id);
 		if (ret < 0) {
 			dev_err(dev, "Unique device id conversion error: %d\n", ret);
 			return ret;
 		}
 
+		if (soc_intel_is_byt_cr(pdev))
+			byt_rvp_platform_data.res_info = &bytcr_res_info;
+	}
+
 	dev_dbg(dev, "ACPI device id: %x\n", dev_id);
 
 	ret = sst_alloc_drv_context(&ctx, dev, dev_id);
 	if (ret < 0)
 		return ret;
 
-	if (soc_intel_is_byt_cr(pdev)) {
-		/* override resource info */
-		byt_rvp_platform_data.res_info = &bytcr_res_info;
-	}
-
 	/* update machine parameters */
 	mach->mach_params.acpi_ipc_irq_index =
 		pdata->res_info->acpi_ipc_irq_index;
@@ -344,6 +389,7 @@ static void sst_acpi_remove(struct platform_device *pdev)
 }
 
 static const struct acpi_device_id sst_acpi_ids[] = {
+	{ "LPE0F28", (unsigned long)&snd_soc_acpi_intel_baytrail_machines},
 	{ "80860F28", (unsigned long)&snd_soc_acpi_intel_baytrail_machines},
 	{ "808622A8", (unsigned long)&snd_soc_acpi_intel_cherrytrail_machines},
 	{ },

sound/soc/intel/boards/bytcr_rt5640.c

@@ -17,6 +17,7 @@
 #include <linux/acpi.h>
 #include <linux/clk.h>
 #include <linux/device.h>
+#include <linux/device/bus.h>
 #include <linux/dmi.h>
 #include <linux/gpio/consumer.h>
 #include <linux/gpio/machine.h>
@@ -32,6 +33,8 @@
 #include "../atom/sst-atom-controls.h"
 #include "../common/soc-intel-quirks.h"
 
+#define BYT_RT5640_FALLBACK_CODEC_DEV_NAME	"i2c-rt5640"
+
 enum {
 	BYT_RT5640_DMIC1_MAP,
 	BYT_RT5640_DMIC2_MAP,
@@ -1129,6 +1132,21 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF2 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Vexia Edu Atla 10 tablet */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+			/* Above strings are too generic, also match on BIOS date */
+			DMI_MATCH(DMI_BIOS_DATE, "08/25/2014"),
+		},
+		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_SSP0_AIF2 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{	/* Voyo Winpad A15 */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
@@ -1698,9 +1716,33 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 
 	codec_dev = acpi_get_first_physical_node(adev);
 	acpi_dev_put(adev);
+
+	if (codec_dev) {
+		priv->codec_dev = get_device(codec_dev);
+	} else {
+		/*
+		 * Special case for Android tablets where the codec i2c_client
+		 * has been manually instantiated by x86_android_tablets.ko due
+		 * to a broken DSDT.
+		 */
+		codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL,
+					BYT_RT5640_FALLBACK_CODEC_DEV_NAME);
 		if (!codec_dev)
 			return -EPROBE_DEFER;
-	priv->codec_dev = get_device(codec_dev);
+
+		if (!i2c_verify_client(codec_dev)) {
+			dev_err(dev, "Error '%s' is not an i2c_client\n",
+				BYT_RT5640_FALLBACK_CODEC_DEV_NAME);
+			put_device(codec_dev);
+		}
+
+		/* fixup codec name */
+		strscpy(byt_rt5640_codec_name, BYT_RT5640_FALLBACK_CODEC_DEV_NAME,
+			sizeof(byt_rt5640_codec_name));
+
+		/* bus_find_device() returns a reference no need to get() */
+		priv->codec_dev = codec_dev;
+	}
 
 	/*
 	 * swap SSP0 if bytcr is detected

sound/soc/soc-dapm.c

@@ -1147,6 +1147,8 @@ static int dapm_widget_list_create(struct snd_soc_dapm_widget_list **list,
 	if (*list == NULL)
 		return -ENOMEM;
 
+	(*list)->num_widgets = size;
+
 	list_for_each_entry(w, widgets, work_list)
 		(*list)->widgets[i++] = w;