PCI: designware-ep: Add generic function for raising MSI irq

Add a generic function for raising MSI irqs that can be used by all
DWC based controllers.

Note that certain controllers, like DRA7xx, have a special convenience
register for raising MSI irqs that doesn't require you to explicitly map
the MSI address. Therefore, it is likely that certain drivers will
not use this generic function, even if they can.

Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
This commit is contained in:
Niklas Cassel 2017-12-20 00:29:27 +01:00 committed by Lorenzo Pieralisi
parent 9e7181199e
commit 6f6d787371
2 changed files with 44 additions and 0 deletions

View File

@ -282,6 +282,41 @@ static const struct pci_epc_ops epc_ops = {
.stop = dw_pcie_ep_stop,
};
int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep,
u8 interrupt_num)
{
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
struct pci_epc *epc = ep->epc;
u16 msg_ctrl, msg_data;
u32 msg_addr_lower, msg_addr_upper;
u64 msg_addr;
bool has_upper;
int ret;
/* Raise MSI per the PCI Local Bus Specification Revision 3.0, 6.8.1. */
msg_ctrl = dw_pcie_readw_dbi(pci, MSI_MESSAGE_CONTROL);
has_upper = !!(msg_ctrl & PCI_MSI_FLAGS_64BIT);
msg_addr_lower = dw_pcie_readl_dbi(pci, MSI_MESSAGE_ADDR_L32);
if (has_upper) {
msg_addr_upper = dw_pcie_readl_dbi(pci, MSI_MESSAGE_ADDR_U32);
msg_data = dw_pcie_readw_dbi(pci, MSI_MESSAGE_DATA_64);
} else {
msg_addr_upper = 0;
msg_data = dw_pcie_readw_dbi(pci, MSI_MESSAGE_DATA_32);
}
msg_addr = ((u64) msg_addr_upper) << 32 | msg_addr_lower;
ret = dw_pcie_ep_map_addr(epc, ep->msi_mem_phys, msg_addr,
epc->mem->page_size);
if (ret)
return ret;
writel(msg_data | (interrupt_num - 1), ep->msi_mem);
dw_pcie_ep_unmap_addr(epc, ep->msi_mem_phys);
return 0;
}
void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
{
struct pci_epc *epc = ep->epc;

View File

@ -106,6 +106,8 @@
#define MSI_CAP_MME_MASK (7 << MSI_CAP_MME_SHIFT)
#define MSI_MESSAGE_ADDR_L32 0x54
#define MSI_MESSAGE_ADDR_U32 0x58
#define MSI_MESSAGE_DATA_32 0x58
#define MSI_MESSAGE_DATA_64 0x5C
/*
* Maximum number of MSI IRQs can be 256 per controller. But keep
@ -338,6 +340,7 @@ static inline int dw_pcie_host_init(struct pcie_port *pp)
void dw_pcie_ep_linkup(struct dw_pcie_ep *ep);
int dw_pcie_ep_init(struct dw_pcie_ep *ep);
void dw_pcie_ep_exit(struct dw_pcie_ep *ep);
int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 interrupt_num);
void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar);
#else
static inline void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
@ -353,6 +356,12 @@ static inline void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
{
}
static inline int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep,
u8 interrupt_num)
{
return 0;
}
static inline void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
{
}