mirror of
https://github.com/torvalds/linux.git
synced 2024-11-26 06:02:05 +00:00
gpio: Add support for Intel ICHx/3100/Series[56] GPIO
This driver works on many Intel chipsets, including the ICH6, ICH7,
ICH8, ICH9, ICH10, 3100, Series 5/3400 (Ibex Peak), Series 6/C200
(Cougar Point), and NM10 (Tiger Point).
Additional Intel chipsets should be easily supported if needed, eg the
ICH1-5, EP80579, etc.
Tested on QM67 (Cougar Point), QM57 (Ibex Peak), 3100 (Whitmore Lake),
and NM10 (Tiger Point).
Includes work from Jean Delvare:
- Resource leak removal during module load/unload
- GPIO API bit value enforcement
Also includes code cleanup from Guenter Roeck and Grant Likely.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Peter Tyser
Samuel Ortiz
parent
4630b130b3
commit
6ed9f9c405
@ -3340,6 +3340,12 @@ W: http://www.developer.ibm.com/welcome/netfinity/serveraid.html
|
||||
S: Supported
|
||||
F: drivers/scsi/ips.*
|
||||
|
||||
ICH LPC AND GPIO DRIVER
|
||||
M: Peter Tyser <ptyser@xes-inc.com>
|
||||
S: Maintained
|
||||
F: drivers/mfd/lpc_ich.c
|
||||
F: drivers/gpio/gpio-ich.c
|
||||
|
||||
IDE SUBSYSTEM
|
||||
M: "David S. Miller" <davem@davemloft.net>
|
||||
L: linux-ide@vger.kernel.org
|
||||
|
||||
@ -178,6 +178,19 @@ config GPIO_SCH
|
||||
The Intel Tunnel Creek processor has 5 GPIOs powered by the
|
||||
core power rail and 9 from suspend power supply.
|
||||
|
||||
config GPIO_ICH
|
||||
tristate "Intel ICH GPIO"
|
||||
depends on PCI && X86
|
||||
select MFD_CORE
|
||||
select LPC_ICH
|
||||
help
|
||||
Say yes here to support the GPIO functionality of a number of Intel
|
||||
ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
|
||||
ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
|
||||
Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
config GPIO_VX855
|
||||
tristate "VIA VX855/VX875 GPIO"
|
||||
depends on PCI
|
||||
|
||||
@ -17,6 +17,7 @@ obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
|
||||
obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o
|
||||
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
|
||||
obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
|
||||
obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
|
||||
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
|
||||
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
|
||||
obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
|
||||
|
||||
419
drivers/gpio/gpio-ich.c
Normal file
419
drivers/gpio/gpio-ich.c
Normal file
@ -0,0 +1,419 @@
|
||||
/*
|
||||
* Intel ICH6-10, Series 5 and 6 GPIO driver
|
||||
*
|
||||
* Copyright (C) 2010 Extreme Engineering Solutions.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mfd/lpc_ich.h>
|
||||
|
||||
#define DRV_NAME "gpio_ich"
|
||||
|
||||
/*
|
||||
* GPIO register offsets in GPIO I/O space.
|
||||
* Each chunk of 32 GPIOs is manipulated via its own USE_SELx, IO_SELx, and
|
||||
* LVLx registers. Logic in the read/write functions takes a register and
|
||||
* an absolute bit number and determines the proper register offset and bit
|
||||
* number in that register. For example, to read the value of GPIO bit 50
|
||||
* the code would access offset ichx_regs[2(=GPIO_LVL)][1(=50/32)],
|
||||
* bit 18 (50%32).
|
||||
*/
|
||||
enum GPIO_REG {
|
||||
GPIO_USE_SEL = 0,
|
||||
GPIO_IO_SEL,
|
||||
GPIO_LVL,
|
||||
};
|
||||
|
||||
static const u8 ichx_regs[3][3] = {
|
||||
{0x00, 0x30, 0x40}, /* USE_SEL[1-3] offsets */
|
||||
{0x04, 0x34, 0x44}, /* IO_SEL[1-3] offsets */
|
||||
{0x0c, 0x38, 0x48}, /* LVL[1-3] offsets */
|
||||
};
|
||||
|
||||
#define ICHX_WRITE(val, reg, base_res) outl(val, (reg) + (base_res)->start)
|
||||
#define ICHX_READ(reg, base_res) inl((reg) + (base_res)->start)
|
||||
|
||||
struct ichx_desc {
|
||||
/* Max GPIO pins the chipset can have */
|
||||
uint ngpio;
|
||||
|
||||
/* Whether the chipset has GPIO in GPE0_STS in the PM IO region */
|
||||
bool uses_gpe0;
|
||||
|
||||
/* USE_SEL is bogus on some chipsets, eg 3100 */
|
||||
u32 use_sel_ignore[3];
|
||||
|
||||
/* Some chipsets have quirks, let these use their own request/get */
|
||||
int (*request)(struct gpio_chip *chip, unsigned offset);
|
||||
int (*get)(struct gpio_chip *chip, unsigned offset);
|
||||
};
|
||||
|
||||
static struct {
|
||||
spinlock_t lock;
|
||||
struct platform_device *dev;
|
||||
struct gpio_chip chip;
|
||||
struct resource *gpio_base; /* GPIO IO base */
|
||||
struct resource *pm_base; /* Power Mangagment IO base */
|
||||
struct ichx_desc *desc; /* Pointer to chipset-specific description */
|
||||
u32 orig_gpio_ctrl; /* Orig CTRL value, used to restore on exit */
|
||||
} ichx_priv;
|
||||
|
||||
static int modparam_gpiobase = -1; /* dynamic */
|
||||
module_param_named(gpiobase, modparam_gpiobase, int, 0444);
|
||||
MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, "
|
||||
"which is the default.");
|
||||
|
||||
static int ichx_write_bit(int reg, unsigned nr, int val, int verify)
|
||||
{
|
||||
unsigned long flags;
|
||||
u32 data, tmp;
|
||||
int reg_nr = nr / 32;
|
||||
int bit = nr & 0x1f;
|
||||
int ret = 0;
|
||||
|
||||
spin_lock_irqsave(&ichx_priv.lock, flags);
|
||||
|
||||
data = ICHX_READ(ichx_regs[reg][reg_nr], ichx_priv.gpio_base);
|
||||
if (val)
|
||||
data |= 1 << bit;
|
||||
else
|
||||
data &= ~(1 << bit);
|
||||
ICHX_WRITE(data, ichx_regs[reg][reg_nr], ichx_priv.gpio_base);
|
||||
tmp = ICHX_READ(ichx_regs[reg][reg_nr], ichx_priv.gpio_base);
|
||||
if (verify && data != tmp)
|
||||
ret = -EPERM;
|
||||
|
||||
spin_unlock_irqrestore(&ichx_priv.lock, flags);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int ichx_read_bit(int reg, unsigned nr)
|
||||
{
|
||||
unsigned long flags;
|
||||
u32 data;
|
||||
int reg_nr = nr / 32;
|
||||
int bit = nr & 0x1f;
|
||||
|
||||
spin_lock_irqsave(&ichx_priv.lock, flags);
|
||||
|
||||
data = ICHX_READ(ichx_regs[reg][reg_nr], ichx_priv.gpio_base);
|
||||
|
||||
spin_unlock_irqrestore(&ichx_priv.lock, flags);
|
||||
|
||||
return data & (1 << bit) ? 1 : 0;
|
||||
}
|
||||
|
||||
static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
|
||||
{
|
||||
/*
|
||||
* Try setting pin as an input and verify it worked since many pins
|
||||
* are output-only.
|
||||
*/
|
||||
if (ichx_write_bit(GPIO_IO_SEL, nr, 1, 1))
|
||||
return -EINVAL;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
|
||||
int val)
|
||||
{
|
||||
/* Set GPIO output value. */
|
||||
ichx_write_bit(GPIO_LVL, nr, val, 0);
|
||||
|
||||
/*
|
||||
* Try setting pin as an output and verify it worked since many pins
|
||||
* are input-only.
|
||||
*/
|
||||
if (ichx_write_bit(GPIO_IO_SEL, nr, 0, 1))
|
||||
return -EINVAL;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ichx_gpio_get(struct gpio_chip *chip, unsigned nr)
|
||||
{
|
||||
return ichx_read_bit(GPIO_LVL, nr);
|
||||
}
|
||||
|
||||
static int ich6_gpio_get(struct gpio_chip *chip, unsigned nr)
|
||||
{
|
||||
unsigned long flags;
|
||||
u32 data;
|
||||
|
||||
/*
|
||||
* GPI 0 - 15 need to be read from the power management registers on
|
||||
* a ICH6/3100 bridge.
|
||||
*/
|
||||
if (nr < 16) {
|
||||
if (!ichx_priv.pm_base)
|
||||
return -ENXIO;
|
||||
|
||||
spin_lock_irqsave(&ichx_priv.lock, flags);
|
||||
|
||||
/* GPI 0 - 15 are latched, write 1 to clear*/
|
||||
ICHX_WRITE(1 << (16 + nr), 0, ichx_priv.pm_base);
|
||||
data = ICHX_READ(0, ichx_priv.pm_base);
|
||||
|
||||
spin_unlock_irqrestore(&ichx_priv.lock, flags);
|
||||
|
||||
return (data >> 16) & (1 << nr) ? 1 : 0;
|
||||
} else {
|
||||
return ichx_gpio_get(chip, nr);
|
||||
}
|
||||
}
|
||||
|
||||
static int ichx_gpio_request(struct gpio_chip *chip, unsigned nr)
|
||||
{
|
||||
/*
|
||||
* Note we assume the BIOS properly set a bridge's USE value. Some
|
||||
* chips (eg Intel 3100) have bogus USE values though, so first see if
|
||||
* the chipset's USE value can be trusted for this specific bit.
|
||||
* If it can't be trusted, assume that the pin can be used as a GPIO.
|
||||
*/
|
||||
if (ichx_priv.desc->use_sel_ignore[nr / 32] & (1 << (nr & 0x1f)))
|
||||
return 1;
|
||||
|
||||
return ichx_read_bit(GPIO_USE_SEL, nr) ? 0 : -ENODEV;
|
||||
}
|
||||
|
||||
static int ich6_gpio_request(struct gpio_chip *chip, unsigned nr)
|
||||
{
|
||||
/*
|
||||
* Fixups for bits 16 and 17 are necessary on the Intel ICH6/3100
|
||||
* bridge as they are controlled by USE register bits 0 and 1. See
|
||||
* "Table 704 GPIO_USE_SEL1 register" in the i3100 datasheet for
|
||||
* additional info.
|
||||
*/
|
||||
if (nr == 16 || nr == 17)
|
||||
nr -= 16;
|
||||
|
||||
return ichx_gpio_request(chip, nr);
|
||||
}
|
||||
|
||||
static void ichx_gpio_set(struct gpio_chip *chip, unsigned nr, int val)
|
||||
{
|
||||
ichx_write_bit(GPIO_LVL, nr, val, 0);
|
||||
}
|
||||
|
||||
static void __devinit ichx_gpiolib_setup(struct gpio_chip *chip)
|
||||
{
|
||||
chip->owner = THIS_MODULE;
|
||||
chip->label = DRV_NAME;
|
||||
chip->dev = &ichx_priv.dev->dev;
|
||||
|
||||
/* Allow chip-specific overrides of request()/get() */
|
||||
chip->request = ichx_priv.desc->request ?
|
||||
ichx_priv.desc->request : ichx_gpio_request;
|
||||
chip->get = ichx_priv.desc->get ?
|
||||
ichx_priv.desc->get : ichx_gpio_get;
|
||||
|
||||
chip->set = ichx_gpio_set;
|
||||
chip->direction_input = ichx_gpio_direction_input;
|
||||
chip->direction_output = ichx_gpio_direction_output;
|
||||
chip->base = modparam_gpiobase;
|
||||
chip->ngpio = ichx_priv.desc->ngpio;
|
||||
chip->can_sleep = 0;
|
||||
chip->dbg_show = NULL;
|
||||
}
|
||||
|
||||
/* ICH6-based, 631xesb-based */
|
||||
static struct ichx_desc ich6_desc = {
|
||||
/* Bridges using the ICH6 controller need fixups for GPIO 0 - 17 */
|
||||
.request = ich6_gpio_request,
|
||||
.get = ich6_gpio_get,
|
||||
|
||||
/* GPIO 0-15 are read in the GPE0_STS PM register */
|
||||
.uses_gpe0 = true,
|
||||
|
||||
.ngpio = 50,
|
||||
};
|
||||
|
||||
/* Intel 3100 */
|
||||
static struct ichx_desc i3100_desc = {
|
||||
/*
|
||||
* Bits 16,17, 20 of USE_SEL and bit 16 of USE_SEL2 always read 0 on
|
||||
* the Intel 3100. See "Table 712. GPIO Summary Table" of 3100
|
||||
* Datasheet for more info.
|
||||
*/
|
||||
.use_sel_ignore = {0x00130000, 0x00010000, 0x0},
|
||||
|
||||
/* The 3100 needs fixups for GPIO 0 - 17 */
|
||||
.request = ich6_gpio_request,
|
||||
.get = ich6_gpio_get,
|
||||
|
||||
/* GPIO 0-15 are read in the GPE0_STS PM register */
|
||||
.uses_gpe0 = true,
|
||||
|
||||
.ngpio = 50,
|
||||
};
|
||||
|
||||
/* ICH7 and ICH8-based */
|
||||
static struct ichx_desc ich7_desc = {
|
||||
.ngpio = 50,
|
||||
};
|
||||
|
||||
/* ICH9-based */
|
||||
static struct ichx_desc ich9_desc = {
|
||||
.ngpio = 61,
|
||||
};
|
||||
|
||||
/* ICH10-based - Consumer/corporate versions have different amount of GPIO */
|
||||
static struct ichx_desc ich10_cons_desc = {
|
||||
.ngpio = 61,
|
||||
};
|
||||
static struct ichx_desc ich10_corp_desc = {
|
||||
.ngpio = 72,
|
||||
};
|
||||
|
||||
/* Intel 5 series, 6 series, 3400 series, and C200 series */
|
||||
static struct ichx_desc intel5_desc = {
|
||||
.ngpio = 76,
|
||||
};
|
||||
|
||||
static int __devinit ichx_gpio_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct resource *res_base, *res_pm;
|
||||
int err;
|
||||
struct lpc_ich_info *ich_info = pdev->dev.platform_data;
|
||||
|
||||
if (!ich_info)
|
||||
return -ENODEV;
|
||||
|
||||
ichx_priv.dev = pdev;
|
||||
|
||||
switch (ich_info->gpio_version) {
|
||||
case ICH_I3100_GPIO:
|
||||
ichx_priv.desc = &i3100_desc;
|
||||
break;
|
||||
case ICH_V5_GPIO:
|
||||
ichx_priv.desc = &intel5_desc;
|
||||
break;
|
||||
case ICH_V6_GPIO:
|
||||
ichx_priv.desc = &ich6_desc;
|
||||
break;
|
||||
case ICH_V7_GPIO:
|
||||
ichx_priv.desc = &ich7_desc;
|
||||
break;
|
||||
case ICH_V9_GPIO:
|
||||
ichx_priv.desc = &ich9_desc;
|
||||
break;
|
||||
case ICH_V10CORP_GPIO:
|
||||
ichx_priv.desc = &ich10_corp_desc;
|
||||
break;
|
||||
case ICH_V10CONS_GPIO:
|
||||
ichx_priv.desc = &ich10_cons_desc;
|
||||
break;
|
||||
default:
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
res_base = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPIO);
|
||||
if (!res_base || !res_base->start || !res_base->end)
|
||||
return -ENODEV;
|
||||
|
||||
if (!request_region(res_base->start, resource_size(res_base),
|
||||
pdev->name))
|
||||
return -EBUSY;
|
||||
|
||||
ichx_priv.gpio_base = res_base;
|
||||
|
||||
/*
|
||||
* If necessary, determine the I/O address of ACPI/power management
|
||||
* registers which are needed to read the the GPE0 register for GPI pins
|
||||
* 0 - 15 on some chipsets.
|
||||
*/
|
||||
if (!ichx_priv.desc->uses_gpe0)
|
||||
goto init;
|
||||
|
||||
res_pm = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPE0);
|
||||
if (!res_pm) {
|
||||
pr_warn("ACPI BAR is unavailable, GPI 0 - 15 unavailable\n");
|
||||
goto init;
|
||||
}
|
||||
|
||||
if (!request_region(res_pm->start, resource_size(res_pm),
|
||||
pdev->name)) {
|
||||
pr_warn("ACPI BAR is busy, GPI 0 - 15 unavailable\n");
|
||||
goto init;
|
||||
}
|
||||
|
||||
ichx_priv.pm_base = res_pm;
|
||||
|
||||
init:
|
||||
ichx_gpiolib_setup(&ichx_priv.chip);
|
||||
err = gpiochip_add(&ichx_priv.chip);
|
||||
if (err) {
|
||||
pr_err("Failed to register GPIOs\n");
|
||||
goto add_err;
|
||||
}
|
||||
|
||||
pr_info("GPIO from %d to %d on %s\n", ichx_priv.chip.base,
|
||||
ichx_priv.chip.base + ichx_priv.chip.ngpio - 1, DRV_NAME);
|
||||
|
||||
return 0;
|
||||
|
||||
add_err:
|
||||
release_region(ichx_priv.gpio_base->start,
|
||||
resource_size(ichx_priv.gpio_base));
|
||||
if (ichx_priv.pm_base)
|
||||
release_region(ichx_priv.pm_base->start,
|
||||
resource_size(ichx_priv.pm_base));
|
||||
return err;
|
||||
}
|
||||
|
||||
static int __devexit ichx_gpio_remove(struct platform_device *pdev)
|
||||
{
|
||||
int err;
|
||||
|
||||
err = gpiochip_remove(&ichx_priv.chip);
|
||||
if (err) {
|
||||
dev_err(&pdev->dev, "%s failed, %d\n",
|
||||
"gpiochip_remove()", err);
|
||||
return err;
|
||||
}
|
||||
|
||||
release_region(ichx_priv.gpio_base->start,
|
||||
resource_size(ichx_priv.gpio_base));
|
||||
if (ichx_priv.pm_base)
|
||||
release_region(ichx_priv.pm_base->start,
|
||||
resource_size(ichx_priv.pm_base));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver ichx_gpio_driver = {
|
||||
.driver = {
|
||||
.owner = THIS_MODULE,
|
||||
.name = DRV_NAME,
|
||||
},
|
||||
.probe = ichx_gpio_probe,
|
||||
.remove = __devexit_p(ichx_gpio_remove),
|
||||
};
|
||||
|
||||
module_platform_driver(ichx_gpio_driver);
|
||||
|
||||
MODULE_AUTHOR("Peter Tyser <ptyser@xes-inc.com>");
|
||||
MODULE_DESCRIPTION("GPIO interface for Intel ICH series");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_ALIAS("platform:"DRV_NAME);
|
||||
Loading…
Reference in New Issue
Block a user