[SCSI] ufs: rework link start-up process

Link start-up requires long time with multiphase handshakes
between UFS host and device. This affects driver's probe time.
This patch let link start-up run asynchronously. Link start-up
will be executed at the end of prove separately.
Along with this change, the following is worked.

Defined completion time of uic command to avoid a permanent wait.
Added mutex to guarantee of uic command at a time.
Adapted some sequence of controller initialization after link statup
according to HCI standard.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Tested-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Santosh Y <santoshsy@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
This commit is contained in:
Seungwon Jeon 2013-06-26 22:39:29 +05:30 committed by James Bottomley
parent 261ea45203
commit 6ccf44fe4c
2 changed files with 208 additions and 97 deletions

View File

@ -33,11 +33,15 @@
* this program.
*/
#include <linux/async.h>
#include "ufshcd.h"
#define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\
UTP_TASK_REQ_COMPL |\
UFSHCD_ERROR_MASK)
/* UIC command timeout, unit: ms */
#define UIC_CMD_TIMEOUT 500
enum {
UFSHCD_MAX_CHANNEL = 0,
@ -349,23 +353,121 @@ static inline void ufshcd_hba_capabilities(struct ufs_hba *hba)
}
/**
* ufshcd_send_uic_command - Send UIC commands to unipro layers
* ufshcd_ready_for_uic_cmd - Check if controller is ready
* to accept UIC commands
* @hba: per adapter instance
* @uic_command: UIC command
* Return true on success, else false
*/
static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba)
{
if (ufshcd_readl(hba, REG_CONTROLLER_STATUS) & UIC_COMMAND_READY)
return true;
else
return false;
}
/**
* ufshcd_dispatch_uic_cmd - Dispatch UIC commands to unipro layers
* @hba: per adapter instance
* @uic_cmd: UIC command
*
* Mutex must be held.
*/
static inline void
ufshcd_send_uic_command(struct ufs_hba *hba, struct uic_command *uic_cmnd)
ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
{
WARN_ON(hba->active_uic_cmd);
hba->active_uic_cmd = uic_cmd;
/* Write Args */
ufshcd_writel(hba, uic_cmnd->argument1, REG_UIC_COMMAND_ARG_1);
ufshcd_writel(hba, uic_cmnd->argument2, REG_UIC_COMMAND_ARG_2);
ufshcd_writel(hba, uic_cmnd->argument3, REG_UIC_COMMAND_ARG_3);
ufshcd_writel(hba, uic_cmd->argument1, REG_UIC_COMMAND_ARG_1);
ufshcd_writel(hba, uic_cmd->argument2, REG_UIC_COMMAND_ARG_2);
ufshcd_writel(hba, uic_cmd->argument3, REG_UIC_COMMAND_ARG_3);
/* Write UIC Cmd */
ufshcd_writel(hba, uic_cmnd->command & COMMAND_OPCODE_MASK,
ufshcd_writel(hba, uic_cmd->command & COMMAND_OPCODE_MASK,
REG_UIC_COMMAND);
}
/**
* ufshcd_wait_for_uic_cmd - Wait complectioin of UIC command
* @hba: per adapter instance
* @uic_command: UIC command
*
* Must be called with mutex held.
* Returns 0 only if success.
*/
static int
ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
{
int ret;
unsigned long flags;
if (wait_for_completion_timeout(&uic_cmd->done,
msecs_to_jiffies(UIC_CMD_TIMEOUT)))
ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT;
else
ret = -ETIMEDOUT;
spin_lock_irqsave(hba->host->host_lock, flags);
hba->active_uic_cmd = NULL;
spin_unlock_irqrestore(hba->host->host_lock, flags);
return ret;
}
/**
* __ufshcd_send_uic_cmd - Send UIC commands and retrieve the result
* @hba: per adapter instance
* @uic_cmd: UIC command
*
* Identical to ufshcd_send_uic_cmd() expect mutex. Must be called
* with mutex held.
* Returns 0 only if success.
*/
static int
__ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
{
int ret;
unsigned long flags;
if (!ufshcd_ready_for_uic_cmd(hba)) {
dev_err(hba->dev,
"Controller not ready to accept UIC commands\n");
return -EIO;
}
init_completion(&uic_cmd->done);
spin_lock_irqsave(hba->host->host_lock, flags);
ufshcd_dispatch_uic_cmd(hba, uic_cmd);
spin_unlock_irqrestore(hba->host->host_lock, flags);
ret = ufshcd_wait_for_uic_cmd(hba, uic_cmd);
return ret;
}
/**
* ufshcd_send_uic_cmd - Send UIC commands and retrieve the result
* @hba: per adapter instance
* @uic_cmd: UIC command
*
* Returns 0 only if success.
*/
static int
ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
{
int ret;
mutex_lock(&hba->uic_cmd_mutex);
ret = __ufshcd_send_uic_cmd(hba, uic_cmd);
mutex_unlock(&hba->uic_cmd_mutex);
return ret;
}
/**
* ufshcd_map_sg - Map scatter-gather list to prdt
* @lrbp - pointer to local reference block
@ -725,34 +827,16 @@ static void ufshcd_host_memory_configure(struct ufs_hba *hba)
*/
static int ufshcd_dme_link_startup(struct ufs_hba *hba)
{
struct uic_command *uic_cmd;
unsigned long flags;
struct uic_command uic_cmd = {0};
int ret;
/* check if controller is ready to accept UIC commands */
if ((ufshcd_readl(hba, REG_CONTROLLER_STATUS) &
UIC_COMMAND_READY) == 0x0) {
uic_cmd.command = UIC_CMD_DME_LINK_STARTUP;
ret = ufshcd_send_uic_cmd(hba, &uic_cmd);
if (ret)
dev_err(hba->dev,
"Controller not ready"
" to accept UIC commands\n");
return -EIO;
}
spin_lock_irqsave(hba->host->host_lock, flags);
/* form UIC command */
uic_cmd = &hba->active_uic_cmd;
uic_cmd->command = UIC_CMD_DME_LINK_STARTUP;
uic_cmd->argument1 = 0;
uic_cmd->argument2 = 0;
uic_cmd->argument3 = 0;
/* enable UIC related interrupts */
ufshcd_enable_intr(hba, UIC_COMMAND_COMPL);
/* sending UIC commands to controller */
ufshcd_send_uic_command(hba, uic_cmd);
spin_unlock_irqrestore(hba->host->host_lock, flags);
return 0;
"dme-link-startup: error code %d\n", ret);
return ret;
}
/**
@ -761,9 +845,10 @@ static int ufshcd_dme_link_startup(struct ufs_hba *hba)
*
* To bring UFS host controller to operational state,
* 1. Check if device is present
* 2. Configure run-stop-registers
* 3. Enable required interrupts
* 4. Configure interrupt aggregation
* 2. Enable required interrupts
* 3. Configure interrupt aggregation
* 4. Program UTRL and UTMRL base addres
* 5. Configure run-stop-registers
*
* Returns 0 on success, non-zero value on failure
*/
@ -780,6 +865,22 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba)
goto out;
}
/* Enable required interrupts */
ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS);
/* Configure interrupt aggregation */
ufshcd_config_int_aggr(hba, INT_AGGR_CONFIG);
/* Configure UTRL and UTMRL base address registers */
ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr),
REG_UTP_TRANSFER_REQ_LIST_BASE_L);
ufshcd_writel(hba, upper_32_bits(hba->utrdl_dma_addr),
REG_UTP_TRANSFER_REQ_LIST_BASE_H);
ufshcd_writel(hba, lower_32_bits(hba->utmrdl_dma_addr),
REG_UTP_TASK_REQ_LIST_BASE_L);
ufshcd_writel(hba, upper_32_bits(hba->utmrdl_dma_addr),
REG_UTP_TASK_REQ_LIST_BASE_H);
/*
* UCRDY, UTMRLDY and UTRLRDY bits must be 1
* DEI, HEI bits must be 0
@ -793,17 +894,11 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba)
goto out;
}
/* Enable required interrupts */
ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS);
/* Configure interrupt aggregation */
ufshcd_config_int_aggr(hba, INT_AGGR_CONFIG);
if (hba->ufshcd_state == UFSHCD_STATE_RESET)
scsi_unblock_requests(hba->host);
hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
scsi_scan_host(hba->host);
out:
return err;
}
@ -872,34 +967,28 @@ static int ufshcd_hba_enable(struct ufs_hba *hba)
}
/**
* ufshcd_initialize_hba - start the initialization process
* ufshcd_link_startup - Initialize unipro link startup
* @hba: per adapter instance
*
* 1. Enable the controller via ufshcd_hba_enable.
* 2. Program the Transfer Request List Address with the starting address of
* UTRDL.
* 3. Program the Task Management Request List Address with starting address
* of UTMRDL.
*
* Returns 0 on success, non-zero value on failure.
* Returns 0 for success, non-zero in case of failure
*/
static int ufshcd_initialize_hba(struct ufs_hba *hba)
static int ufshcd_link_startup(struct ufs_hba *hba)
{
if (ufshcd_hba_enable(hba))
return -EIO;
int ret;
/* Configure UTRL and UTMRL base address registers */
ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr),
REG_UTP_TRANSFER_REQ_LIST_BASE_L);
ufshcd_writel(hba, upper_32_bits(hba->utrdl_dma_addr),
REG_UTP_TRANSFER_REQ_LIST_BASE_H);
ufshcd_writel(hba, lower_32_bits(hba->utmrdl_dma_addr),
REG_UTP_TASK_REQ_LIST_BASE_L);
ufshcd_writel(hba, upper_32_bits(hba->utmrdl_dma_addr),
REG_UTP_TASK_REQ_LIST_BASE_H);
/* enable UIC related interrupts */
ufshcd_enable_intr(hba, UIC_COMMAND_COMPL);
/* Initialize unipro link startup procedure */
return ufshcd_dme_link_startup(hba);
ret = ufshcd_dme_link_startup(hba);
if (ret)
goto out;
ret = ufshcd_make_hba_operational(hba);
out:
if (ret)
dev_err(hba->dev, "link startup failed %d\n", ret);
return ret;
}
/**
@ -939,12 +1028,19 @@ static int ufshcd_do_reset(struct ufs_hba *hba)
hba->outstanding_reqs = 0;
hba->outstanding_tasks = 0;
/* start the initialization process */
if (ufshcd_initialize_hba(hba)) {
/* Host controller enable */
if (ufshcd_hba_enable(hba)) {
dev_err(hba->dev,
"Reset: Controller initialization failed\n");
return FAILED;
}
if (ufshcd_link_startup(hba)) {
dev_err(hba->dev,
"Reset: Link start-up failed\n");
return FAILED;
}
return SUCCESS;
}
@ -1175,6 +1271,19 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
return result;
}
/**
* ufshcd_uic_cmd_compl - handle completion of uic command
* @hba: per adapter instance
*/
static void ufshcd_uic_cmd_compl(struct ufs_hba *hba)
{
if (hba->active_uic_cmd) {
hba->active_uic_cmd->argument2 |=
ufshcd_get_uic_cmd_result(hba);
complete(&hba->active_uic_cmd->done);
}
}
/**
* ufshcd_transfer_req_compl - handle SCSI and query command completion
* @hba: per adapter instance
@ -1214,28 +1323,6 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
ufshcd_config_int_aggr(hba, INT_AGGR_RESET);
}
/**
* ufshcd_uic_cc_handler - handle UIC command completion
* @work: pointer to a work queue structure
*
* Returns 0 on success, non-zero value on failure
*/
static void ufshcd_uic_cc_handler (struct work_struct *work)
{
struct ufs_hba *hba;
hba = container_of(work, struct ufs_hba, uic_workq);
if ((hba->active_uic_cmd.command == UIC_CMD_DME_LINK_STARTUP) &&
!(ufshcd_get_uic_cmd_result(hba))) {
if (ufshcd_make_hba_operational(hba))
dev_err(hba->dev,
"cc: hba not operational state\n");
return;
}
}
/**
* ufshcd_fatal_err_handler - handle fatal errors
* @hba: per adapter instance
@ -1297,7 +1384,7 @@ static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
ufshcd_err_handler(hba);
if (intr_status & UIC_COMMAND_COMPL)
schedule_work(&hba->uic_workq);
ufshcd_uic_cmd_compl(hba);
if (intr_status & UTP_TASK_REQ_COMPL)
ufshcd_tmc_handler(hba);
@ -1520,6 +1607,21 @@ out:
return err;
}
/**
* ufshcd_async_scan - asynchronous execution for link startup
* @data: data pointer to pass to this function
* @cookie: cookie data
*/
static void ufshcd_async_scan(void *data, async_cookie_t cookie)
{
struct ufs_hba *hba = (struct ufs_hba *)data;
int ret;
ret = ufshcd_link_startup(hba);
if (!ret)
scsi_scan_host(hba->host);
}
static struct scsi_host_template ufshcd_driver_template = {
.module = THIS_MODULE,
.name = UFSHCD,
@ -1681,9 +1783,11 @@ int ufshcd_init(struct device *dev, struct ufs_hba **hba_handle,
init_waitqueue_head(&hba->ufshcd_tm_wait_queue);
/* Initialize work queues */
INIT_WORK(&hba->uic_workq, ufshcd_uic_cc_handler);
INIT_WORK(&hba->feh_workq, ufshcd_fatal_err_handler);
/* Initialize UIC command mutex */
mutex_init(&hba->uic_cmd_mutex);
/* IRQ registration */
err = request_irq(irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba);
if (err) {
@ -1704,14 +1808,17 @@ int ufshcd_init(struct device *dev, struct ufs_hba **hba_handle,
goto out_free_irq;
}
/* Initialization routine */
err = ufshcd_initialize_hba(hba);
/* Host controller enable */
err = ufshcd_hba_enable(hba);
if (err) {
dev_err(hba->dev, "Initialization failed\n");
dev_err(hba->dev, "Host controller enable failed\n");
goto out_remove_scsi_host;
}
*hba_handle = hba;
async_schedule(ufshcd_async_scan, hba);
return 0;
out_remove_scsi_host:

View File

@ -51,6 +51,7 @@
#include <linux/bitops.h>
#include <linux/pm_runtime.h>
#include <linux/clk.h>
#include <linux/completion.h>
#include <asm/irq.h>
#include <asm/byteorder.h>
@ -75,6 +76,7 @@
* @argument3: UIC command argument 3
* @cmd_active: Indicate if UIC command is outstanding
* @result: UIC command result
* @done: UIC command completion
*/
struct uic_command {
u32 command;
@ -83,6 +85,7 @@ struct uic_command {
u32 argument3;
int cmd_active;
int result;
struct completion done;
};
/**
@ -136,11 +139,11 @@ struct ufshcd_lrb {
* @ufs_version: UFS Version to which controller complies
* @irq: Irq number of the controller
* @active_uic_cmd: handle of active UIC command
* @uic_cmd_mutex: mutex for uic command
* @ufshcd_tm_wait_queue: wait queue for task management
* @tm_condition: condition variable for task management
* @ufshcd_state: UFSHCD states
* @intr_mask: Interrupt Mask Bits
* @uic_workq: Work queue for UIC completion handling
* @feh_workq: Work queue for fatal controller error handling
* @errors: HBA errors
*/
@ -171,7 +174,9 @@ struct ufs_hba {
u32 ufs_version;
unsigned int irq;
struct uic_command active_uic_cmd;
struct uic_command *active_uic_cmd;
struct mutex uic_cmd_mutex;
wait_queue_head_t ufshcd_tm_wait_queue;
unsigned long tm_condition;
@ -179,7 +184,6 @@ struct ufs_hba {
u32 intr_mask;
/* Work Queues */
struct work_struct uic_workq;
struct work_struct feh_workq;
/* HBA Errors */