mirror of
https://github.com/torvalds/linux.git
synced 2024-12-11 05:33:09 +00:00
ARM: Integrator: move 16-bit timer support to Integrator/AP
Only Integrator/AP has 16-bit timers, so move the support into the Integrator/AP specific support files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Russell King
parent
5a46334ac6
commit
6be4826e37
@ -1 +0,0 @@
|
||||
extern void integrator_time_init(u32, unsigned int);
|
||||
@ -19,8 +19,6 @@
|
||||
#include <linux/termios.h>
|
||||
#include <linux/amba/bus.h>
|
||||
#include <linux/amba/serial.h>
|
||||
#include <linux/clocksource.h>
|
||||
#include <linux/clockchips.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <asm/clkdev.h>
|
||||
@ -28,14 +26,11 @@
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/platform.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/hardware/arm_timer.h>
|
||||
#include <mach/cm.h>
|
||||
#include <asm/system.h>
|
||||
#include <asm/leds.h>
|
||||
#include <asm/mach/time.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
static struct amba_pl010_data integrator_uart_data;
|
||||
|
||||
static struct amba_device rtc_device = {
|
||||
@ -220,155 +215,3 @@ void cm_control(u32 mask, u32 set)
|
||||
}
|
||||
|
||||
EXPORT_SYMBOL(cm_control);
|
||||
|
||||
/*
|
||||
* Where is the timer (VA)?
|
||||
*/
|
||||
#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE)
|
||||
#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE)
|
||||
#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE)
|
||||
|
||||
/*
|
||||
* How long is the timer interval?
|
||||
*/
|
||||
#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
|
||||
#if TIMER_INTERVAL >= 0x100000
|
||||
#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
|
||||
#elif TIMER_INTERVAL >= 0x10000
|
||||
#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
|
||||
#else
|
||||
#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
|
||||
#endif
|
||||
|
||||
static unsigned long timer_reload;
|
||||
|
||||
static void __iomem * const clksrc_base = (void __iomem *)TIMER2_VA_BASE;
|
||||
|
||||
static cycle_t timersp_read(struct clocksource *cs)
|
||||
{
|
||||
return ~(readl(clksrc_base + TIMER_VALUE) & 0xffff);
|
||||
}
|
||||
|
||||
static struct clocksource clocksource_timersp = {
|
||||
.name = "timer2",
|
||||
.rating = 200,
|
||||
.read = timersp_read,
|
||||
.mask = CLOCKSOURCE_MASK(16),
|
||||
.shift = 16,
|
||||
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
||||
};
|
||||
|
||||
static void integrator_clocksource_init(u32 khz)
|
||||
{
|
||||
struct clocksource *cs = &clocksource_timersp;
|
||||
void __iomem *base = clksrc_base;
|
||||
u32 ctrl = TIMER_CTRL_ENABLE;
|
||||
|
||||
if (khz >= 1500) {
|
||||
khz /= 16;
|
||||
ctrl = TIMER_CTRL_DIV16;
|
||||
}
|
||||
|
||||
writel(ctrl, base + TIMER_CTRL);
|
||||
writel(0xffff, base + TIMER_LOAD);
|
||||
|
||||
cs->mult = clocksource_khz2mult(khz, cs->shift);
|
||||
clocksource_register(cs);
|
||||
}
|
||||
|
||||
static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
|
||||
|
||||
/*
|
||||
* IRQ handler for the timer
|
||||
*/
|
||||
static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
struct clock_event_device *evt = dev_id;
|
||||
|
||||
/* clear the interrupt */
|
||||
writel(1, clkevt_base + TIMER_INTCLR);
|
||||
|
||||
evt->event_handler(evt);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
|
||||
{
|
||||
u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
|
||||
|
||||
BUG_ON(mode == CLOCK_EVT_MODE_ONESHOT);
|
||||
|
||||
if (mode == CLOCK_EVT_MODE_PERIODIC) {
|
||||
writel(ctrl, clkevt_base + TIMER_CTRL);
|
||||
writel(timer_reload, clkevt_base + TIMER_LOAD);
|
||||
ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
|
||||
}
|
||||
|
||||
writel(ctrl, clkevt_base + TIMER_CTRL);
|
||||
}
|
||||
|
||||
static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
|
||||
{
|
||||
unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
|
||||
|
||||
writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
|
||||
writel(next, clkevt_base + TIMER_LOAD);
|
||||
writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct clock_event_device integrator_clockevent = {
|
||||
.name = "timer1",
|
||||
.shift = 34,
|
||||
.features = CLOCK_EVT_FEAT_PERIODIC,
|
||||
.set_mode = clkevt_set_mode,
|
||||
.set_next_event = clkevt_set_next_event,
|
||||
.rating = 300,
|
||||
.cpumask = cpu_all_mask,
|
||||
};
|
||||
|
||||
static struct irqaction integrator_timer_irq = {
|
||||
.name = "timer",
|
||||
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
|
||||
.handler = integrator_timer_interrupt,
|
||||
.dev_id = &integrator_clockevent,
|
||||
};
|
||||
|
||||
static void integrator_clockevent_init(u32 khz, unsigned int ctrl)
|
||||
{
|
||||
struct clock_event_device *evt = &integrator_clockevent;
|
||||
|
||||
if (khz * 1000 > 0x100000 * HZ) {
|
||||
khz /= 256;
|
||||
ctrl |= TIMER_CTRL_DIV256;
|
||||
} else if (khz * 1000 > 0x10000 * HZ) {
|
||||
khz /= 16;
|
||||
ctrl |= TIMER_CTRL_DIV16;
|
||||
}
|
||||
|
||||
timer_reload = khz * 1000 / HZ;
|
||||
writel(ctrl, clkevt_base + TIMER_CTRL);
|
||||
|
||||
evt->irq = IRQ_TIMERINT1;
|
||||
evt->mult = div_sc(khz, NSEC_PER_MSEC, evt->shift);
|
||||
evt->max_delta_ns = clockevent_delta2ns(0xffff, evt);
|
||||
evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
|
||||
|
||||
setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
|
||||
clockevents_register_device(evt);
|
||||
}
|
||||
|
||||
/*
|
||||
* Set up timer(s).
|
||||
*/
|
||||
void __init integrator_time_init(u32 khz, unsigned int ctrl)
|
||||
{
|
||||
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
|
||||
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
|
||||
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
|
||||
|
||||
integrator_clocksource_init(khz);
|
||||
integrator_clockevent_init(khz, ctrl);
|
||||
}
|
||||
|
||||
@ -27,10 +27,14 @@
|
||||
#include <linux/sysdev.h>
|
||||
#include <linux/amba/bus.h>
|
||||
#include <linux/amba/kmi.h>
|
||||
#include <linux/clocksource.h>
|
||||
#include <linux/clockchips.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/platform.h>
|
||||
#include <asm/hardware/arm_timer.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/setup.h>
|
||||
#include <asm/param.h> /* HZ */
|
||||
@ -44,8 +48,6 @@
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/time.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
/*
|
||||
* All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
|
||||
* is the (PA >> 12).
|
||||
@ -335,9 +337,159 @@ static void __init ap_init(void)
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* Where is the timer (VA)?
|
||||
*/
|
||||
#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE)
|
||||
#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE)
|
||||
#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE)
|
||||
|
||||
/*
|
||||
* How long is the timer interval?
|
||||
*/
|
||||
#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
|
||||
#if TIMER_INTERVAL >= 0x100000
|
||||
#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
|
||||
#elif TIMER_INTERVAL >= 0x10000
|
||||
#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
|
||||
#else
|
||||
#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
|
||||
#endif
|
||||
|
||||
static unsigned long timer_reload;
|
||||
|
||||
static void __iomem * const clksrc_base = (void __iomem *)TIMER2_VA_BASE;
|
||||
|
||||
static cycle_t timersp_read(struct clocksource *cs)
|
||||
{
|
||||
return ~(readl(clksrc_base + TIMER_VALUE) & 0xffff);
|
||||
}
|
||||
|
||||
static struct clocksource clocksource_timersp = {
|
||||
.name = "timer2",
|
||||
.rating = 200,
|
||||
.read = timersp_read,
|
||||
.mask = CLOCKSOURCE_MASK(16),
|
||||
.shift = 16,
|
||||
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
||||
};
|
||||
|
||||
static void integrator_clocksource_init(u32 khz)
|
||||
{
|
||||
struct clocksource *cs = &clocksource_timersp;
|
||||
void __iomem *base = clksrc_base;
|
||||
u32 ctrl = TIMER_CTRL_ENABLE;
|
||||
|
||||
if (khz >= 1500) {
|
||||
khz /= 16;
|
||||
ctrl = TIMER_CTRL_DIV16;
|
||||
}
|
||||
|
||||
writel(ctrl, base + TIMER_CTRL);
|
||||
writel(0xffff, base + TIMER_LOAD);
|
||||
|
||||
cs->mult = clocksource_khz2mult(khz, cs->shift);
|
||||
clocksource_register(cs);
|
||||
}
|
||||
|
||||
static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
|
||||
|
||||
/*
|
||||
* IRQ handler for the timer
|
||||
*/
|
||||
static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
struct clock_event_device *evt = dev_id;
|
||||
|
||||
/* clear the interrupt */
|
||||
writel(1, clkevt_base + TIMER_INTCLR);
|
||||
|
||||
evt->event_handler(evt);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
|
||||
{
|
||||
u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
|
||||
|
||||
BUG_ON(mode == CLOCK_EVT_MODE_ONESHOT);
|
||||
|
||||
if (mode == CLOCK_EVT_MODE_PERIODIC) {
|
||||
writel(ctrl, clkevt_base + TIMER_CTRL);
|
||||
writel(timer_reload, clkevt_base + TIMER_LOAD);
|
||||
ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
|
||||
}
|
||||
|
||||
writel(ctrl, clkevt_base + TIMER_CTRL);
|
||||
}
|
||||
|
||||
static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
|
||||
{
|
||||
unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
|
||||
|
||||
writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
|
||||
writel(next, clkevt_base + TIMER_LOAD);
|
||||
writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct clock_event_device integrator_clockevent = {
|
||||
.name = "timer1",
|
||||
.shift = 34,
|
||||
.features = CLOCK_EVT_FEAT_PERIODIC,
|
||||
.set_mode = clkevt_set_mode,
|
||||
.set_next_event = clkevt_set_next_event,
|
||||
.rating = 300,
|
||||
.cpumask = cpu_all_mask,
|
||||
};
|
||||
|
||||
static struct irqaction integrator_timer_irq = {
|
||||
.name = "timer",
|
||||
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
|
||||
.handler = integrator_timer_interrupt,
|
||||
.dev_id = &integrator_clockevent,
|
||||
};
|
||||
|
||||
static void integrator_clockevent_init(u32 khz)
|
||||
{
|
||||
struct clock_event_device *evt = &integrator_clockevent;
|
||||
unsigned int ctrl = 0;
|
||||
|
||||
if (khz * 1000 > 0x100000 * HZ) {
|
||||
khz /= 256;
|
||||
ctrl |= TIMER_CTRL_DIV256;
|
||||
} else if (khz * 1000 > 0x10000 * HZ) {
|
||||
khz /= 16;
|
||||
ctrl |= TIMER_CTRL_DIV16;
|
||||
}
|
||||
|
||||
timer_reload = khz * 1000 / HZ;
|
||||
writel(ctrl, clkevt_base + TIMER_CTRL);
|
||||
|
||||
evt->irq = IRQ_TIMERINT1;
|
||||
evt->mult = div_sc(khz, NSEC_PER_MSEC, evt->shift);
|
||||
evt->max_delta_ns = clockevent_delta2ns(0xffff, evt);
|
||||
evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
|
||||
|
||||
setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
|
||||
clockevents_register_device(evt);
|
||||
}
|
||||
|
||||
/*
|
||||
* Set up timer(s).
|
||||
*/
|
||||
static void __init ap_init_timer(void)
|
||||
{
|
||||
integrator_time_init(TICKS_PER_uSEC * 1000, 0);
|
||||
u32 khz = TICKS_PER_uSEC * 1000;
|
||||
|
||||
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
|
||||
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
|
||||
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
|
||||
|
||||
integrator_clocksource_init(khz);
|
||||
integrator_clockevent_init(khz);
|
||||
}
|
||||
|
||||
static struct sys_timer ap_timer = {
|
||||
|
||||
@ -43,8 +43,6 @@
|
||||
|
||||
#include <plat/timer-sp.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
#define INTCP_PA_FLASH_BASE 0x24000000
|
||||
#define INTCP_FLASH_SIZE SZ_32M
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user