From 6a983ff5102ff0d859df05ca3f5cf2f6a17c0fad Mon Sep 17 00:00:00 2001 From: Boerge Struempfel Date: Tue, 30 May 2023 16:16:38 +0200 Subject: [PATCH] spi: spi-imx: add support for SPI_MOSI_IDLE_LOW mode bit By default, the spi-imx controller pulls the mosi line high, whenever it is idle. This behaviour can be inverted per CS by setting the corresponding DATA_CTL bit in the config register of the controller. Also, since the controller mode-bits have to be touched anyways, the SPI_CPOL and SPI_CPHA are replaced by the combined SPI_MODE_X_MASK flag. Signed-off-by: Boerge Struempfel Link: https://lore.kernel.org/r/20230530141641.1155691-3-boerge.struempfel@gmail.com Signed-off-by: Mark Brown --- drivers/spi/spi-imx.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index bd6ddb142b13..6f4d3cb81fdf 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -281,6 +281,7 @@ static bool spi_imx_can_dma(struct spi_controller *controller, struct spi_device #define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs & 3) + 4)) #define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs & 3) + 8)) #define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs & 3) + 12)) +#define MX51_ECSPI_CONFIG_DATACTL(cs) (1 << ((cs & 3) + 16)) #define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs & 3) + 20)) #define MX51_ECSPI_INT 0x10 @@ -573,6 +574,11 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx, cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(spi_get_chipselect(spi, 0)); } + if (spi->mode & SPI_MOSI_IDLE_LOW) + cfg |= MX51_ECSPI_CONFIG_DATACTL(spi_get_chipselect(spi, 0)); + else + cfg &= ~MX51_ECSPI_CONFIG_DATACTL(spi_get_chipselect(spi, 0)); + if (spi->mode & SPI_CS_HIGH) cfg |= MX51_ECSPI_CONFIG_SSBPOL(spi_get_chipselect(spi, 0)); else @@ -1743,7 +1749,8 @@ static int spi_imx_probe(struct platform_device *pdev) controller->prepare_message = spi_imx_prepare_message; controller->unprepare_message = spi_imx_unprepare_message; controller->slave_abort = spi_imx_slave_abort; - controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS; + controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS | + SPI_MOSI_IDLE_LOW; if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx))