Merge branch 'remotes/lorenzo/pci/dwc'

- Constify histb dw_pcie_host_ops structure (Julia Lawall)

  - Support multiple power domains for imx6 (Leonard Crestez)

  - Constify layerscape driver data (Stefan Agner)

  - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho)

  - Support armada8k GPIO reset (Baruch Siach)

  - Support suspend/resume support on imx6 (Leonard Crestez)

  - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren)

  - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov)

  - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi)

* remotes/lorenzo/pci/dwc:
  MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry
  PCI: dwc: Don't hard-code DBI/ATU offset
  PCI: imx: Add imx6sx suspend/resume support
  PCI: armada8k: Add support for gpio controlled reset signal
  PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7
  PCI: dwc: layerscape: Constify driver data
  PCI: imx: Add multi-pd support
  dt-bindings: imx6q-pcie: Add multi-pd bindings for imx6sx
  PCI: histb: Constify dw_pcie_host_ops structure

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt

@@ -41,7 +41,9 @@ Optional properties:
 Additional required properties for imx6sx-pcie:
 - clock names: Must include the following additional entries:
 	- "pcie_inbound_axi"
-- power-domains: Must be set to a phandle pointing to the PCIE_PHY power domain
+- power-domains: Must be set to phandles pointing to the DISPLAY and
+  PCIE_PHY power domains
+- power-domain-names: Must be "pcie", "pcie_phy"
 
 Additional required properties for imx7d-pcie:
 - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain

MAINTAINERS

@@ -11549,7 +11549,6 @@ F:	Documentation/devicetree/bindings/pci/kirin-pcie.txt
 F:	drivers/pci/controller/dwc/pcie-kirin.c
 
 PCIE DRIVER FOR HISILICON STB
-M:	Jianguo Sun <sunjianguo1@huawei.com>
 M:	Shawn Guo <shawn.guo@linaro.org>
 L:	linux-pci@vger.kernel.org
 S:	Maintained

drivers/pci/controller/dwc/Kconfig

@@ -89,8 +89,8 @@ config PCI_EXYNOS
 	select PCIE_DW_HOST
 
 config PCI_IMX6
-	bool "Freescale i.MX6 PCIe controller"
-	depends on SOC_IMX6Q || (ARM && COMPILE_TEST)
+	bool "Freescale i.MX6/7 PCIe controller"
+	depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST)
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIE_DW_HOST
 

drivers/pci/controller/dwc/pci-imx6.c

@@ -27,6 +27,8 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/reset.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
 
 #include "pcie-designware.h"
 
@@ -59,6 +61,11 @@ struct imx6_pcie {
 	u32			tx_swing_low;
 	int			link_gen;
 	struct regulator	*vpcie;
+
+	/* power domain for pcie */
+	struct device		*pd_pcie;
+	/* power domain for pcie phy */
+	struct device		*pd_pcie_phy;
 };
 
 /* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */
@@ -292,6 +299,43 @@ static int imx6q_pcie_abort_handler(unsigned long addr,
 	return 1;
 }
 
+static int imx6_pcie_attach_pd(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+	struct device_link *link;
+
+	/* Do nothing when in a single power domain */
+	if (dev->pm_domain)
+		return 0;
+
+	imx6_pcie->pd_pcie = dev_pm_domain_attach_by_name(dev, "pcie");
+	if (IS_ERR(imx6_pcie->pd_pcie))
+		return PTR_ERR(imx6_pcie->pd_pcie);
+	link = device_link_add(dev, imx6_pcie->pd_pcie,
+			DL_FLAG_STATELESS |
+			DL_FLAG_PM_RUNTIME |
+			DL_FLAG_RPM_ACTIVE);
+	if (!link) {
+		dev_err(dev, "Failed to add device_link to pcie pd.\n");
+		return -EINVAL;
+	}
+
+	imx6_pcie->pd_pcie_phy = dev_pm_domain_attach_by_name(dev, "pcie_phy");
+	if (IS_ERR(imx6_pcie->pd_pcie_phy))
+		return PTR_ERR(imx6_pcie->pd_pcie_phy);
+
+	device_link_add(dev, imx6_pcie->pd_pcie_phy,
+			DL_FLAG_STATELESS |
+			DL_FLAG_PM_RUNTIME |
+			DL_FLAG_RPM_ACTIVE);
+	if (IS_ERR(link)) {
+		dev_err(dev, "Failed to add device_link to pcie_phy pd: %ld\n", PTR_ERR(link));
+		return PTR_ERR(link);
+	}
+
+	return 0;
+}
+
 static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 {
 	struct device *dev = imx6_pcie->pci->dev;
@@ -773,8 +817,28 @@ static void imx6_pcie_ltssm_disable(struct device *dev)
 
 static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
 {
+	struct device *dev = imx6_pcie->pci->dev;
+
+	/* Some variants have a turnoff reset in DT */
+	if (imx6_pcie->turnoff_reset) {
 		reset_control_assert(imx6_pcie->turnoff_reset);
 		reset_control_deassert(imx6_pcie->turnoff_reset);
+		goto pm_turnoff_sleep;
+	}
+
+	/* Others poke directly at IOMUXC registers */
+	switch (imx6_pcie->variant) {
+	case IMX6SX:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				IMX6SX_GPR12_PCIE_PM_TURN_OFF,
+				IMX6SX_GPR12_PCIE_PM_TURN_OFF);
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				IMX6SX_GPR12_PCIE_PM_TURN_OFF, 0);
+		break;
+	default:
+		dev_err(dev, "PME_Turn_Off not implemented\n");
+		return;
+	}
 
 	/*
 	 * Components with an upstream port must respond to
@@ -783,6 +847,7 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
 	 * The standard recommends a 1-10ms timeout after which to
 	 * proceed anyway as if acks were received.
 	 */
+pm_turnoff_sleep:
 	usleep_range(1000, 10000);
 }
 
@@ -792,18 +857,31 @@ static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
 	clk_disable_unprepare(imx6_pcie->pcie_phy);
 	clk_disable_unprepare(imx6_pcie->pcie_bus);
 
-	if (imx6_pcie->variant == IMX7D) {
+	switch (imx6_pcie->variant) {
+	case IMX6SX:
+		clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
+		break;
+	case IMX7D:
 		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
 				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
 				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
+		break;
+	default:
+		break;
 	}
 }
 
+static inline bool imx6_pcie_supports_suspend(struct imx6_pcie *imx6_pcie)
+{
+	return (imx6_pcie->variant == IMX7D ||
+		imx6_pcie->variant == IMX6SX);
+}
+
 static int imx6_pcie_suspend_noirq(struct device *dev)
 {
 	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
 
-	if (imx6_pcie->variant != IMX7D)
+	if (!imx6_pcie_supports_suspend(imx6_pcie))
 		return 0;
 
 	imx6_pcie_pm_turnoff(imx6_pcie);
@@ -819,7 +897,7 @@ static int imx6_pcie_resume_noirq(struct device *dev)
 	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
 	struct pcie_port *pp = &imx6_pcie->pci->pp;
 
-	if (imx6_pcie->variant != IMX7D)
+	if (!imx6_pcie_supports_suspend(imx6_pcie))
 		return 0;
 
 	imx6_pcie_assert_core_reset(imx6_pcie);
@@ -985,6 +1063,10 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, imx6_pcie);
 
+	ret = imx6_pcie_attach_pd(dev);
+	if (ret)
+		return ret;
+
 	ret = imx6_add_pcie_port(imx6_pcie, pdev);
 	if (ret < 0)
 		return ret;

drivers/pci/controller/dwc/pci-layerscape.c

@@ -222,12 +222,12 @@ static const struct dw_pcie_ops dw_ls_pcie_ops = {
 	.link_up = ls_pcie_link_up,
 };
 
-static struct ls_pcie_drvdata ls1021_drvdata = {
+static const struct ls_pcie_drvdata ls1021_drvdata = {
 	.ops = &ls1021_pcie_host_ops,
 	.dw_pcie_ops = &dw_ls1021_pcie_ops,
 };
 
-static struct ls_pcie_drvdata ls1043_drvdata = {
+static const struct ls_pcie_drvdata ls1043_drvdata = {
 	.lut_offset = 0x10000,
 	.ltssm_shift = 24,
 	.lut_dbg = 0x7fc,
@@ -235,7 +235,7 @@ static struct ls_pcie_drvdata ls1043_drvdata = {
 	.dw_pcie_ops = &dw_ls_pcie_ops,
 };
 
-static struct ls_pcie_drvdata ls1046_drvdata = {
+static const struct ls_pcie_drvdata ls1046_drvdata = {
 	.lut_offset = 0x80000,
 	.ltssm_shift = 24,
 	.lut_dbg = 0x407fc,
@@ -243,7 +243,7 @@ static struct ls_pcie_drvdata ls1046_drvdata = {
 	.dw_pcie_ops = &dw_ls_pcie_ops,
 };
 
-static struct ls_pcie_drvdata ls2080_drvdata = {
+static const struct ls_pcie_drvdata ls2080_drvdata = {
 	.lut_offset = 0x80000,
 	.ltssm_shift = 0,
 	.lut_dbg = 0x7fc,
@@ -251,7 +251,7 @@ static struct ls_pcie_drvdata ls2080_drvdata = {
 	.dw_pcie_ops = &dw_ls_pcie_ops,
 };
 
-static struct ls_pcie_drvdata ls2088_drvdata = {
+static const struct ls_pcie_drvdata ls2088_drvdata = {
 	.lut_offset = 0x80000,
 	.ltssm_shift = 0,
 	.lut_dbg = 0x407fc,

drivers/pci/controller/dwc/pcie-armada8k.c

@@ -22,6 +22,7 @@
 #include <linux/resource.h>
 #include <linux/of_pci.h>
 #include <linux/of_irq.h>
+#include <linux/gpio/consumer.h>
 
 #include "pcie-designware.h"
 
@@ -29,6 +30,7 @@ struct armada8k_pcie {
 	struct dw_pcie *pci;
 	struct clk *clk;
 	struct clk *clk_reg;
+	struct gpio_desc *reset_gpio;
 };
 
 #define PCIE_VENDOR_REGS_OFFSET		0x8000
@@ -137,6 +139,12 @@ static int armada8k_pcie_host_init(struct pcie_port *pp)
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct armada8k_pcie *pcie = to_armada8k_pcie(pci);
 
+	if (pcie->reset_gpio) {
+		/* assert and then deassert the reset signal */
+		gpiod_set_value_cansleep(pcie->reset_gpio, 1);
+		msleep(100);
+		gpiod_set_value_cansleep(pcie->reset_gpio, 0);
+	}
 	dw_pcie_setup_rc(pp);
 	armada8k_pcie_establish_link(pcie);
 
@@ -249,6 +257,14 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
 		goto fail_clkreg;
 	}
 
+	/* Get reset gpio signal and hold asserted (logically high) */
+	pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+						   GPIOD_OUT_HIGH);
+	if (IS_ERR(pcie->reset_gpio)) {
+		ret = PTR_ERR(pcie->reset_gpio);
+		goto fail_clkreg;
+	}
+
 	platform_set_drvdata(pdev, pcie);
 
 	ret = armada8k_add_pcie_port(pcie, pdev);

drivers/pci/controller/dwc/pcie-designware-ep.c

@@ -504,6 +504,10 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 		dev_err(dev, "dbi_base/dbi_base2 is not populated\n");
 		return -EINVAL;
 	}
+	if (pci->iatu_unroll_enabled && !pci->atu_base) {
+		dev_err(dev, "atu_base is not populated\n");
+		return -EINVAL;
+	}
 
 	ret = of_property_read_u32(np, "num-ib-windows", &ep->num_ib_windows);
 	if (ret < 0) {

drivers/pci/controller/dwc/pcie-designware-host.c

@@ -699,6 +699,9 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 		dev_dbg(pci->dev, "iATU unroll: %s\n",
 			pci->iatu_unroll_enabled ? "enabled" : "disabled");
 
+		if (pci->iatu_unroll_enabled && !pci->atu_base)
+			pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
+
 		dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX0,
 					  PCIE_ATU_TYPE_MEM, pp->mem_base,
 					  pp->mem_bus_addr, pp->mem_size);

drivers/pci/controller/dwc/pcie-designware.c

@@ -93,7 +93,7 @@ static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg)
 {
 	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
 
-	return dw_pcie_readl_dbi(pci, offset + reg);
+	return dw_pcie_readl_atu(pci, offset + reg);
 }
 
 static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
@@ -101,7 +101,7 @@ static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
 {
 	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
 
-	dw_pcie_writel_dbi(pci, offset + reg, val);
+	dw_pcie_writel_atu(pci, offset + reg, val);
 }
 
 static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
@@ -187,7 +187,7 @@ static u32 dw_pcie_readl_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg)
 {
 	u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
 
-	return dw_pcie_readl_dbi(pci, offset + reg);
+	return dw_pcie_readl_atu(pci, offset + reg);
 }
 
 static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg,
@@ -195,7 +195,7 @@ static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg,
 {
 	u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
 
-	dw_pcie_writel_dbi(pci, offset + reg, val);
+	dw_pcie_writel_atu(pci, offset + reg, val);
 }
 
 static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,

drivers/pci/controller/dwc/pcie-designware.h

@@ -92,12 +92,20 @@
 #define PCIE_ATU_UNR_LOWER_TARGET	0x14
 #define PCIE_ATU_UNR_UPPER_TARGET	0x18
 
+/*
+ * The default address offset between dbi_base and atu_base. Root controller
+ * drivers are not required to initialize atu_base if the offset matches this
+ * default; the driver core automatically derives atu_base from dbi_base using
+ * this offset, if atu_base not set.
+ */
+#define DEFAULT_DBI_ATU_OFFSET (0x3 << 20)
+
 /* Register address builder */
 #define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) \
-			((0x3 << 20) | ((region) << 9))
+		((region) << 9)
 
 #define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region) \
-			((0x3 << 20) | ((region) << 9) | (0x1 << 8))
+		(((region) << 9) | (0x1 << 8))
 
 #define MAX_MSI_IRQS			256
 #define MAX_MSI_IRQS_PER_CTRL		32
@@ -219,6 +227,8 @@ struct dw_pcie {
 	struct device		*dev;
 	void __iomem		*dbi_base;
 	void __iomem		*dbi_base2;
+	/* Used when iatu_unroll_enabled is true */
+	void __iomem		*atu_base;
 	u32			num_viewport;
 	u8			iatu_unroll_enabled;
 	struct pcie_port	pp;
@@ -289,6 +299,16 @@ static inline u32 dw_pcie_readl_dbi2(struct dw_pcie *pci, u32 reg)
 	return __dw_pcie_read_dbi(pci, pci->dbi_base2, reg, 0x4);
 }
 
+static inline void dw_pcie_writel_atu(struct dw_pcie *pci, u32 reg, u32 val)
+{
+	__dw_pcie_write_dbi(pci, pci->atu_base, reg, 0x4, val);
+}
+
+static inline u32 dw_pcie_readl_atu(struct dw_pcie *pci, u32 reg)
+{
+	return __dw_pcie_read_dbi(pci, pci->atu_base, reg, 0x4);
+}
+
 static inline void dw_pcie_dbi_ro_wr_en(struct dw_pcie *pci)
 {
 	u32 reg;

drivers/pci/controller/dwc/pcie-histb.c

@@ -202,7 +202,7 @@ static int histb_pcie_host_init(struct pcie_port *pp)
 	return 0;
 }
 
-static struct dw_pcie_host_ops histb_pcie_host_ops = {
+static const struct dw_pcie_host_ops histb_pcie_host_ops = {
 	.rd_own_conf = histb_pcie_rd_own_conf,
 	.wr_own_conf = histb_pcie_wr_own_conf,
 	.host_init = histb_pcie_host_init,

include/linux/mfd/syscon/imx6q-iomuxc-gpr.h

@@ -440,6 +440,7 @@
 #define IMX6SX_GPR5_DISP_MUX_DCIC1_MASK			(0x1 << 1)
 
 #define IMX6SX_GPR12_PCIE_TEST_POWERDOWN		BIT(30)
+#define IMX6SX_GPR12_PCIE_PM_TURN_OFF			BIT(16)
 #define IMX6SX_GPR12_PCIE_RX_EQ_MASK			(0x7 << 0)
 #define IMX6SX_GPR12_PCIE_RX_EQ_2			(0x2 << 0)