Some pin control fixes for v6.0:

- Fix IRQ wakeup and pins for UFS and SDC2 issues on the
   Qualcomm SC8180x
 - Fix the Rockchip driver to support interrupt on both rising
   and falling edges.
 - Name the Allwinner A100 R_PIO properly
 - Fix several issues with the Ocelot interrupts.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmMkaAgACgkQQRCzN7AZ
 XXN5Hg/+Ktv4bK5aN8ldE8csIDHFQ6VCTMk70dqpLVSpbKwuoY5ag1+bmTzcqmUB
 zP+ToL9a2CH1rDuDhM+hPHgzjYs/qD+wdm9q1qPSpbtbNEKCvQpWxEtFsBKvcdRy
 JfEsK0fyld7MCJBZp9Y1qSpmcKMWaaxXaffcaE2k2fG7/BcrXpnyfa2vHdji64YE
 5JXhpA6CtTmEjclVKcRw595Z8o0ml1UBjgRqWX14YQwtL5rj2bf+pWbjkN8w6DRw
 WyuFHxY55ww95dkTPcI5VkF5dVdrIiqilxxpiSyyDJxm2s1HUsWOPuAfo3NKyH7y
 s9qO5LRblvB3kS8Yuh94gzO/sgXC6D3gKDQp5Hkf6zn2X4tO1M5IH+5mZyeTPbDb
 LoGg4AF+E4buK3ztA0oSTe2Ok3aVwtdd4HUaWffHK7dVhET/eVEIup33hq2eY+z+
 jHaC26MvP6qL7EDKNg2OY70ok1qGVupuIHz/Km/asBymzgRzotdWNCr1rxl4E3LF
 VY7eecXYEyCZQ9C3llaDZvbIuIQPuM0yTsI36i2fdv4aqBtgteW+gSOnPpVpoFSg
 j9jo8F57FKcZM28qpXSorPY0TFq2/U/rLwR5Zg8jtguudEtm2izUjiNDY/yiN7Hr
 5hWn2CKVi8du7JZKJImOhQ3v/cYWqke4uv2rnwJ/D3jzPGxpFx8=
 =i8Nw
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Nothing special, just driver fixes:

   - Fix IRQ wakeup and pins for UFS and SDC2 issues on the Qualcomm
     SC8180x

   - Fix the Rockchip driver to support interrupt on both rising and
     falling edges.

   - Name the Allwinner A100 R_PIO properly

   - Fix several issues with the Ocelot interrupts"

* tag 'pinctrl-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: ocelot: Fix interrupt controller
  pinctrl: sunxi: Fix name for A100 R_PIO
  pinctrl: rockchip: Enhance support for IRQ_TYPE_EDGE_BOTH
  pinctrl: qcom: sc8180x: Fix wrong pin numbers
  pinctrl: qcom: sc8180x: Fix gpio_wakeirq_map

drivers/gpio/gpio-rockchip.c

@@ -419,11 +419,11 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
 			goto out;
 		} else {
 			bank->toggle_edge_mode |= mask;
-			level |= mask;
+			level &= ~mask;
 
 			/*
 			 * Determine gpio state. If 1 next interrupt should be
-			 * falling otherwise rising.
+			 * low otherwise high.
 			 */
 			data = readl(bank->reg_base + bank->gpio_regs->ext_port);
 			if (data & mask)

drivers/pinctrl/pinctrl-ocelot.c

@@ -331,6 +331,7 @@ struct ocelot_pinctrl {
 	const struct ocelot_pincfg_data *pincfg_data;
 	struct ocelot_pmx_func func[FUNC_MAX];
 	u8 stride;
+	struct workqueue_struct *wq;
 };
 
 struct ocelot_match_data {
@@ -338,6 +339,11 @@ struct ocelot_match_data {
 	struct ocelot_pincfg_data pincfg_data;
 };
 
+struct ocelot_irq_work {
+	struct work_struct irq_work;
+	struct irq_desc *irq_desc;
+};
+
 #define LUTON_P(p, f0, f1)						\
 static struct ocelot_pin_caps luton_pin_##p = {				\
 	.pin = p,							\
@@ -1813,6 +1819,75 @@ static void ocelot_irq_mask(struct irq_data *data)
 	gpiochip_disable_irq(chip, gpio);
 }
 
+static void ocelot_irq_work(struct work_struct *work)
+{
+	struct ocelot_irq_work *w = container_of(work, struct ocelot_irq_work, irq_work);
+	struct irq_chip *parent_chip = irq_desc_get_chip(w->irq_desc);
+	struct gpio_chip *chip = irq_desc_get_chip_data(w->irq_desc);
+	struct irq_data *data = irq_desc_get_irq_data(w->irq_desc);
+	unsigned int gpio = irqd_to_hwirq(data);
+
+	local_irq_disable();
+	chained_irq_enter(parent_chip, w->irq_desc);
+	generic_handle_domain_irq(chip->irq.domain, gpio);
+	chained_irq_exit(parent_chip, w->irq_desc);
+	local_irq_enable();
+
+	kfree(w);
+}
+
+static void ocelot_irq_unmask_level(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct ocelot_pinctrl *info = gpiochip_get_data(chip);
+	struct irq_desc *desc = irq_data_to_desc(data);
+	unsigned int gpio = irqd_to_hwirq(data);
+	unsigned int bit = BIT(gpio % 32);
+	bool ack = false, active = false;
+	u8 trigger_level;
+	int val;
+
+	trigger_level = irqd_get_trigger_type(data);
+
+	/* Check if the interrupt line is still active. */
+	regmap_read(info->map, REG(OCELOT_GPIO_IN, info, gpio), &val);
+	if ((!(val & bit) && trigger_level == IRQ_TYPE_LEVEL_LOW) ||
+	      (val & bit && trigger_level == IRQ_TYPE_LEVEL_HIGH))
+		active = true;
+
+	/*
+	 * Check if the interrupt controller has seen any changes in the
+	 * interrupt line.
+	 */
+	regmap_read(info->map, REG(OCELOT_GPIO_INTR, info, gpio), &val);
+	if (val & bit)
+		ack = true;
+
+	/* Enable the interrupt now */
+	gpiochip_enable_irq(chip, gpio);
+	regmap_update_bits(info->map, REG(OCELOT_GPIO_INTR_ENA, info, gpio),
+			   bit, bit);
+
+	/*
+	 * In case the interrupt line is still active and the interrupt
+	 * controller has not seen any changes in the interrupt line, then it
+	 * means that there happen another interrupt while the line was active.
+	 * So we missed that one, so we need to kick the interrupt again
+	 * handler.
+	 */
+	if (active && !ack) {
+		struct ocelot_irq_work *work;
+
+		work = kmalloc(sizeof(*work), GFP_ATOMIC);
+		if (!work)
+			return;
+
+		work->irq_desc = desc;
+		INIT_WORK(&work->irq_work, ocelot_irq_work);
+		queue_work(info->wq, &work->irq_work);
+	}
+}
+
 static void ocelot_irq_unmask(struct irq_data *data)
 {
 	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
@@ -1836,13 +1911,12 @@ static void ocelot_irq_ack(struct irq_data *data)
 
 static int ocelot_irq_set_type(struct irq_data *data, unsigned int type);
 
-static struct irq_chip ocelot_eoi_irqchip = {
+static struct irq_chip ocelot_level_irqchip = {
 	.name		= "gpio",
 	.irq_mask	= ocelot_irq_mask,
-	.irq_eoi	= ocelot_irq_ack,
-	.irq_unmask	= ocelot_irq_unmask,
-	.flags          = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED |
-			  IRQCHIP_IMMUTABLE,
+	.irq_ack	= ocelot_irq_ack,
+	.irq_unmask	= ocelot_irq_unmask_level,
+	.flags		= IRQCHIP_IMMUTABLE,
 	.irq_set_type	= ocelot_irq_set_type,
 	GPIOCHIP_IRQ_RESOURCE_HELPERS
 };
@@ -1859,14 +1933,9 @@ static struct irq_chip ocelot_irqchip = {
 
 static int ocelot_irq_set_type(struct irq_data *data, unsigned int type)
 {
-	type &= IRQ_TYPE_SENSE_MASK;
-
-	if (!(type & (IRQ_TYPE_EDGE_BOTH | IRQ_TYPE_LEVEL_HIGH)))
-		return -EINVAL;
-
-	if (type & IRQ_TYPE_LEVEL_HIGH)
-		irq_set_chip_handler_name_locked(data, &ocelot_eoi_irqchip,
-						 handle_fasteoi_irq, NULL);
+	if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+		irq_set_chip_handler_name_locked(data, &ocelot_level_irqchip,
+						 handle_level_irq, NULL);
 	if (type & IRQ_TYPE_EDGE_BOTH)
 		irq_set_chip_handler_name_locked(data, &ocelot_irqchip,
 						 handle_edge_irq, NULL);
@@ -1996,6 +2065,10 @@ static int ocelot_pinctrl_probe(struct platform_device *pdev)
 	if (!info->desc)
 		return -ENOMEM;
 
+	info->wq = alloc_ordered_workqueue("ocelot_ordered", 0);
+	if (!info->wq)
+		return -ENOMEM;
+
 	info->pincfg_data = &data->pincfg_data;
 
 	reset = devm_reset_control_get_optional_shared(dev, "switch");
@@ -2018,7 +2091,7 @@ static int ocelot_pinctrl_probe(struct platform_device *pdev)
 		dev_err(dev, "Failed to create regmap\n");
 		return PTR_ERR(info->map);
 	}
-	dev_set_drvdata(dev, info->map);
+	dev_set_drvdata(dev, info);
 	info->dev = dev;
 
 	/* Pinconf registers */
@@ -2043,6 +2116,15 @@ static int ocelot_pinctrl_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static int ocelot_pinctrl_remove(struct platform_device *pdev)
+{
+	struct ocelot_pinctrl *info = platform_get_drvdata(pdev);
+
+	destroy_workqueue(info->wq);
+
+	return 0;
+}
+
 static struct platform_driver ocelot_pinctrl_driver = {
 	.driver = {
 		.name = "pinctrl-ocelot",
@@ -2050,6 +2132,7 @@ static struct platform_driver ocelot_pinctrl_driver = {
 		.suppress_bind_attrs = true,
 	},
 	.probe = ocelot_pinctrl_probe,
+	.remove = ocelot_pinctrl_remove,
 };
 module_platform_driver(ocelot_pinctrl_driver);
 MODULE_LICENSE("Dual MIT/GPL");

drivers/pinctrl/qcom/pinctrl-sc8180x.c

@@ -530,10 +530,10 @@ DECLARE_MSM_GPIO_PINS(187);
 DECLARE_MSM_GPIO_PINS(188);
 DECLARE_MSM_GPIO_PINS(189);
 
-static const unsigned int sdc2_clk_pins[] = { 190 };
-static const unsigned int sdc2_cmd_pins[] = { 191 };
-static const unsigned int sdc2_data_pins[] = { 192 };
-static const unsigned int ufs_reset_pins[] = { 193 };
+static const unsigned int ufs_reset_pins[] = { 190 };
+static const unsigned int sdc2_clk_pins[] = { 191 };
+static const unsigned int sdc2_cmd_pins[] = { 192 };
+static const unsigned int sdc2_data_pins[] = { 193 };
 
 enum sc8180x_functions {
 	msm_mux_adsp_ext,
@@ -1582,7 +1582,7 @@ static const int sc8180x_acpi_reserved_gpios[] = {
 static const struct msm_gpio_wakeirq_map sc8180x_pdc_map[] = {
 	{ 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 }, { 12, 104 },
 	{ 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 }, { 30, 39 }, { 36, 43 },
-	{ 37, 43 }, { 38, 45 }, { 39, 118 }, { 39, 125 }, { 41, 47 },
+	{ 37, 44 }, { 38, 45 }, { 39, 118 }, { 39, 125 }, { 41, 47 },
 	{ 42, 48 }, { 46, 50 }, { 47, 49 }, { 48, 51 }, { 49, 53 }, { 50, 52 },
 	{ 51, 116 }, { 51, 123 }, { 53, 54 }, { 54, 55 }, { 55, 56 },
 	{ 56, 57 }, { 58, 58 }, { 60, 60 }, { 68, 62 }, { 70, 63 }, { 76, 86 },

drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c

@@ -99,7 +99,7 @@ MODULE_DEVICE_TABLE(of, a100_r_pinctrl_match);
 static struct platform_driver a100_r_pinctrl_driver = {
 	.probe	= a100_r_pinctrl_probe,
 	.driver	= {
-		.name		= "sun50iw10p1-r-pinctrl",
+		.name		= "sun50i-a100-r-pinctrl",
 		.of_match_table	= a100_r_pinctrl_match,
 	},
 };