drm: tda998x: Fix EDID read timeout on HDMI connect

When the HDMI cable is disconnected and reconnected, EDID reading
is called too early raising a EDID read timeout.
This patch uses the system work queue to delay the notification
of the HDMI connect/disconnect event.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Jean-Francois Moine 2014-11-29 08:57:15 +01:00 committed by Russell King
parent ed9a84262a
commit 6833d26ef8

View File

@ -33,6 +33,7 @@ struct tda998x_priv {
struct i2c_client *cec;
struct i2c_client *hdmi;
struct mutex mutex;
struct delayed_work dwork;
uint16_t rev;
uint8_t current_page;
int dpms;
@ -549,6 +550,17 @@ tda998x_reset(struct tda998x_priv *priv)
reg_write(priv, REG_MUX_VP_VIP_OUT, 0x24);
}
/* handle HDMI connect/disconnect */
static void tda998x_hpd(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
struct tda998x_priv *priv =
container_of(dwork, struct tda998x_priv, dwork);
if (priv->encoder && priv->encoder->dev)
drm_kms_helper_hotplug_event(priv->encoder->dev);
}
/*
* only 2 interrupts may occur: screen plug/unplug and EDID read
*/
@ -572,8 +584,7 @@ static irqreturn_t tda998x_irq_thread(int irq, void *data)
priv->wq_edid_wait = 0;
wake_up(&priv->wq_edid);
} else if (cec != 0) { /* HPD change */
if (priv->encoder && priv->encoder->dev)
drm_helper_hpd_irq_event(priv->encoder->dev);
schedule_delayed_work(&priv->dwork, HZ/10);
}
return IRQ_HANDLED;
}
@ -1183,8 +1194,10 @@ static void tda998x_destroy(struct tda998x_priv *priv)
/* disable all IRQs and free the IRQ handler */
cec_write(priv, REG_CEC_RXSHPDINTENA, 0);
reg_clear(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
if (priv->hdmi->irq)
if (priv->hdmi->irq) {
free_irq(priv->hdmi->irq, priv);
cancel_delayed_work_sync(&priv->dwork);
}
i2c_unregister_device(priv->cec);
}
@ -1338,8 +1351,9 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
if (client->irq) {
int irqf_trigger;
/* init read EDID waitqueue */
/* init read EDID waitqueue and HDP work */
init_waitqueue_head(&priv->wq_edid);
INIT_DELAYED_WORK(&priv->dwork, tda998x_hpd);
/* clear pending interrupts */
reg_read(priv, REG_INT_FLAGS_0);