i.MX fixes for 6.4:

- A couple of i.MX8MN/P video clock changes from Adam Ford to fix issue
   with clock re-parenting.
 - Add missing pvcie-supply regulator for imx6qdl-mba6 board.
 - A series of colibri-imx8x board fixes on pin configuration.
 - Set and limit the mode for PMIC bucks for imx6ull-dhcor board to fix
   stability problems.
 - A couple of changes from Frank Li to correct cdns,usb3 bindings
   cdns,on-chip-buff-size property and fix USB 3.0 gadget failure on
   i.MX8QM & QXPB0.
 - Add a required PHY deassert delay for imx8mn-var-som board to fix PHY
   detection failure.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmRjhcYUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM41EQf/Rjk68gAG2dZfFV33PYcnONrJJYuz
 gtnBME7XtHqSR5dKByUIXqtSrn9ROY3RQt0Kp2dWv/dY248PtF4IdldsAjr6tF6P
 Sy8m6tdG9n+tvCgsHGKxhomLm2Wophwt5+Na8G+3XPLzs9PsiBuRLIHWPMAqOiZX
 +TzpzNOwflGt49HRqAObzAexmR24cG9U6N5dcNb/avd4qMguuh4UVkMpTsDuz9gi
 Lpt3K8yCjy8AexlB4Fti/8F1cZUcmJRRsUeFhlduBLgeHKHAEJaTJZuTHUtkmRXT
 CxW3ya2HKGJE4Swea4CDpjhrOS3nZBkp1Z2VyjPUJIszauuBZzHm4Pvkdw==
 =vZ+e
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmRvfT4ACgkQYKtH/8kJ
 Uien9Q/+PVS6G/lEWu3nV8J8GkQlj/fKO4mUnJiSYS5HNeDdBj6M20qlHZvd4dMb
 +Kt6IC5jpnDSRajbjBOxzSD6aAsmV1VUrBa8k/TfteHUnLCfS0okQ/DC9YUVtHgr
 5AVokHlNvFI9dDTTeQ6AuyNp/kn57h6+3jSdBQAhDTyNXYDQEkEmeFYpEx4v7VlL
 E9EEjsBK8f2dQe1x7GSZuNrjU0JRsK7KJZBa7aOShAFHz5Mj/hJ7XFtchpW1ZQ+u
 lBn3VMucLADJMKnDYZ6O28hZ8My3mB9vm0Wd0n0N6slRFOQHzeX2dAcvQEVMMQPV
 Ll6ddU09j5e/rNc/mQUuHhEMOS6pZjM3FISrI9QDJOc3s3wHXQSdoikTF+oBDsO3
 imfMZyGD5W1rapWDTr+i8clmGOZl5riKcsvm5LPrmlBQSZpDKphCpkooryCF7XSM
 +KYrHFSPV8iwgB4uO8/Ow8QTNfGe3pDRUo1eQ8uPryX5ZgTOZKGvpzcO4puK5iCu
 NaXkLm4KcVLq6E7yfIqhPGkiJtV3VCnFDx3D7cupk0IeZW+9Z8/4CrmeO40QcKUb
 qT8k+caijpuCDDl/gHxuHA9Ld1vSbl1VL18OrqWTfK3NbrP8o/dytINlspscy8fj
 JDExUWKVIQrhJqyP9VdYEiTFQ+A4SznE9OVdnLeCu0hM70wfqjg=
 =6H6u
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.4:

- A couple of i.MX8MN/P video clock changes from Adam Ford to fix issue
  with clock re-parenting.
- Add missing pvcie-supply regulator for imx6qdl-mba6 board.
- A series of colibri-imx8x board fixes on pin configuration.
- Set and limit the mode for PMIC bucks for imx6ull-dhcor board to fix
  stability problems.
- A couple of changes from Frank Li to correct cdns,usb3 bindings
  cdns,on-chip-buff-size property and fix USB 3.0 gadget failure on
  i.MX8QM & QXPB0.
- Add a required PHY deassert delay for imx8mn-var-som board to fix PHY
  detection failure.

* tag 'imx-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8: fix USB 3.0 Gadget Failure in QM & QXPB0 at super speed
  dt-binding: cdns,usb3: Fix cdns,on-chip-buff-size type
  arm64: dts: colibri-imx8x: delete adc1 and dsp
  arm64: dts: colibri-imx8x: fix iris pinctrl configuration
  arm64: dts: colibri-imx8x: move pinctrl property from SoM to eval board
  arm64: dts: colibri-imx8x: fix eval board pin configuration
  arm64: dts: imx8mp: Fix video clock parents
  ARM: dts: imx6qdl-mba6: Add missing pvcie-supply regulator
  ARM: dts: imx6ull-dhcor: Set and limit the mode for PMIC buck 1, 2 and 3
  arm64: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay
  arm64: dts: imx8mn: Fix video clock parents

Link: https://lore.kernel.org/r/20230516133625.GI767028@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/usb/cdns,usb3.yaml

@@ -64,7 +64,7 @@ properties:
     description:
       size of memory intended as internal memory for endpoints
       buffers expressed in KB
-    $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint16
 
   cdns,phyrst-a-enable:
     description: Enable resetting of PHY if Rx fail is detected

arch/arm/boot/dts/imx6qdl-mba6.dtsi

@@ -209,6 +209,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
 	reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6ull-dhcor-som.dtsi

@@ -8,6 +8,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/regulator/dlg,da9063-regulator.h>
 #include "imx6ull.dtsi"
 
 / {
@@ -84,16 +85,20 @@
 
 		regulators {
 			vdd_soc_in_1v4: buck1 {
+				regulator-allowed-modes = <DA9063_BUCK_MODE_SLEEP>; /* PFM */
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SLEEP>;
 				regulator-max-microvolt = <1400000>;
 				regulator-min-microvolt = <1400000>;
 				regulator-name = "vdd_soc_in_1v4";
 			};
 
 			vcc_3v3: buck2 {
+				regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-max-microvolt = <3300000>;
 				regulator-min-microvolt = <3300000>;
 				regulator-name = "vcc_3v3";
@@ -106,8 +111,10 @@
 			 * the voltage is set to 1.5V.
 			 */
 			vcc_ddr_1v35: buck3 {
+				regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-max-microvolt = <1500000>;
 				regulator-min-microvolt = <1500000>;
 				regulator-name = "vcc_ddr_1v35";

arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi

@@ -171,6 +171,7 @@ conn_subsys: bus@5b000000 {
 			interrupt-names = "host", "peripheral", "otg", "wakeup";
 			phys = <&usb3_phy>;
 			phy-names = "cdns3,usb3-phy";
+			cdns,on-chip-buff-size = /bits/ 16 <18>;
 			status = "disabled";
 		};
 	};

arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi

@@ -98,11 +98,17 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethphy: ethernet-phy@4 {
+		ethphy: ethernet-phy@4 { /* AR8033 or ADIN1300 */
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <4>;
 			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
+			/*
+			 * Deassert delay:
+			 * ADIN1300 requires 5ms.
+			 * AR8033   requires 1ms.
+			 */
+			reset-deassert-us = <20000>;
 		};
 	};
 };

arch/arm64/boot/dts/freescale/imx8mn.dtsi

@@ -1069,13 +1069,6 @@
 					 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
 					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>;
 				clock-names = "pix", "axi", "disp_axi";
-				assigned-clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
-						  <&clk IMX8MN_CLK_DISP_AXI>,
-						  <&clk IMX8MN_CLK_DISP_APB>;
-				assigned-clock-parents = <&clk IMX8MN_CLK_DISP_PIXEL>,
-							 <&clk IMX8MN_SYS_PLL2_1000M>,
-							 <&clk IMX8MN_SYS_PLL1_800M>;
-				assigned-clock-rates = <594000000>, <500000000>, <200000000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_LCDIF>;
 				status = "disabled";
@@ -1093,12 +1086,6 @@
 				clocks = <&clk IMX8MN_CLK_DSI_CORE>,
 					 <&clk IMX8MN_CLK_DSI_PHY_REF>;
 				clock-names = "bus_clk", "sclk_mipi";
-				assigned-clocks = <&clk IMX8MN_CLK_DSI_CORE>,
-						  <&clk IMX8MN_CLK_DSI_PHY_REF>;
-				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
-							 <&clk IMX8MN_CLK_24M>;
-				assigned-clock-rates = <266000000>, <24000000>;
-				samsung,pll-clock-frequency = <24000000>;
 				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_DSI>;
 				status = "disabled";
@@ -1142,6 +1129,21 @@
 					      "lcdif-axi", "lcdif-apb", "lcdif-pix",
 					      "dsi-pclk", "dsi-ref",
 					      "csi-aclk", "csi-pclk";
+				assigned-clocks = <&clk IMX8MN_CLK_DSI_CORE>,
+						  <&clk IMX8MN_CLK_DSI_PHY_REF>,
+						  <&clk IMX8MN_CLK_DISP_PIXEL>,
+						  <&clk IMX8MN_CLK_DISP_AXI>,
+						  <&clk IMX8MN_CLK_DISP_APB>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
+							 <&clk IMX8MN_CLK_24M>,
+							 <&clk IMX8MN_VIDEO_PLL1_OUT>,
+							 <&clk IMX8MN_SYS_PLL2_1000M>,
+							 <&clk IMX8MN_SYS_PLL1_800M>;
+				assigned-clock-rates = <266000000>,
+						       <24000000>,
+						       <594000000>,
+						       <500000000>,
+						       <200000000>;
 				#power-domain-cells = <1>;
 			};
 

arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -1211,13 +1211,6 @@
 					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
 				clock-names = "pix", "axi", "disp_axi";
-				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>,
-						  <&clk IMX8MP_CLK_MEDIA_AXI>,
-						  <&clk IMX8MP_CLK_MEDIA_APB>;
-				assigned-clock-parents = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
-							 <&clk IMX8MP_SYS_PLL2_1000M>,
-							 <&clk IMX8MP_SYS_PLL1_800M>;
-				assigned-clock-rates = <594000000>, <500000000>, <200000000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_1>;
 				status = "disabled";
@@ -1237,11 +1230,6 @@
 					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
 				clock-names = "pix", "axi", "disp_axi";
-				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
-						  <&clk IMX8MP_VIDEO_PLL1>;
-				assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>,
-							 <&clk IMX8MP_VIDEO_PLL1_REF_SEL>;
-				assigned-clock-rates = <0>, <1039500000>;
 				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_2>;
 				status = "disabled";
 
@@ -1296,11 +1284,16 @@
 					      "disp1", "disp2", "isp", "phy";
 
 				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>,
-						  <&clk IMX8MP_CLK_MEDIA_APB>;
+						  <&clk IMX8MP_CLK_MEDIA_APB>,
+						  <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
+						  <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
+						  <&clk IMX8MP_VIDEO_PLL1>;
 				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
-							 <&clk IMX8MP_SYS_PLL1_800M>;
+							 <&clk IMX8MP_SYS_PLL1_800M>,
-				assigned-clock-rates = <500000000>, <200000000>;
+							 <&clk IMX8MP_VIDEO_PLL1_OUT>,
-
+							 <&clk IMX8MP_VIDEO_PLL1_OUT>;
+				assigned-clock-rates = <500000000>, <200000000>,
+						       <0>, <0>, <1039500000>;
 				#power-domain-cells = <1>;
 
 				lvds_bridge: bridge@5c {

arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi

@@ -33,6 +33,12 @@
 	};
 };
 
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>,
+		    <&pinctrl_lpspi2_cs2>;
+};
+
 /* Colibri SPI */
 &lpspi2 {
 	status = "okay";

arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi

@@ -48,8 +48,7 @@
 			   <IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28		0x20>,		/* SODIMM 101 */
 			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27		0x20>,		/* SODIMM  97 */
 			   <IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03	0x06000020>,	/* SODIMM  85 */
-			   <IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26		0x20>,		/* SODIMM  79 */
+			   <IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26		0x20>;		/* SODIMM  79 */
-			   <IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10	0x06700041>;	/* SODIMM  45 */
 	};
 
 	pinctrl_uart1_forceoff: uart1forceoffgrp {

arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi

@@ -363,10 +363,6 @@
 /* TODO VPU Encoder/Decoder */
 
 &iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>,
-		    <&pinctrl_hog2>, <&pinctrl_lpspi2_cs2>;
-
 	/* On-module touch pen-down interrupt */
 	pinctrl_ad7879_int: ad7879intgrp {
 		fsl,pins = <IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05	0x21>;
@@ -499,8 +495,7 @@
 	};
 
 	pinctrl_hog1: hog1grp {
-		fsl,pins = <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01			0x20>,		/* SODIMM  75 */
+		fsl,pins = <IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16			0x20>;		/* SODIMM  93 */
-			   <IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16			0x20>;		/* SODIMM  93 */
 	};
 
 	pinctrl_hog2: hog2grp {
@@ -774,3 +769,10 @@
 		fsl,pins = <IMX8QXP_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K	0x20>;
 	};
 };
+
+/* Delete peripherals which are not present on SOC, but are defined in imx8-ss-*.dtsi */
+
+/delete-node/ &adc1;
+/delete-node/ &adc1_lpcg;
+/delete-node/ &dsp;
+/delete-node/ &dsp_lpcg;