Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-23 04:31:50 +00:00
Code Issues Packages Projects Releases Wiki Activity

i.MX fixes for 6.4:

Browse Source 
- A couple of i.MX8MN/P video clock changes from Adam Ford to fix issue
   with clock re-parenting.
 - Add missing pvcie-supply regulator for imx6qdl-mba6 board.
 - A series of colibri-imx8x board fixes on pin configuration.
 - Set and limit the mode for PMIC bucks for imx6ull-dhcor board to fix
   stability problems.
 - A couple of changes from Frank Li to correct cdns,usb3 bindings
   cdns,on-chip-buff-size property and fix USB 3.0 gadget failure on
   i.MX8QM & QXPB0.
 - Add a required PHY deassert delay for imx8mn-var-som board to fix PHY
   detection failure.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmRjhcYUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM41EQf/Rjk68gAG2dZfFV33PYcnONrJJYuz
 gtnBME7XtHqSR5dKByUIXqtSrn9ROY3RQt0Kp2dWv/dY248PtF4IdldsAjr6tF6P
 Sy8m6tdG9n+tvCgsHGKxhomLm2Wophwt5+Na8G+3XPLzs9PsiBuRLIHWPMAqOiZX
 +TzpzNOwflGt49HRqAObzAexmR24cG9U6N5dcNb/avd4qMguuh4UVkMpTsDuz9gi
 Lpt3K8yCjy8AexlB4Fti/8F1cZUcmJRRsUeFhlduBLgeHKHAEJaTJZuTHUtkmRXT
 CxW3ya2HKGJE4Swea4CDpjhrOS3nZBkp1Z2VyjPUJIszauuBZzHm4Pvkdw==
 =vZ+e
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmRvfT4ACgkQYKtH/8kJ
 Uien9Q/+PVS6G/lEWu3nV8J8GkQlj/fKO4mUnJiSYS5HNeDdBj6M20qlHZvd4dMb
 +Kt6IC5jpnDSRajbjBOxzSD6aAsmV1VUrBa8k/TfteHUnLCfS0okQ/DC9YUVtHgr
 5AVokHlNvFI9dDTTeQ6AuyNp/kn57h6+3jSdBQAhDTyNXYDQEkEmeFYpEx4v7VlL
 E9EEjsBK8f2dQe1x7GSZuNrjU0JRsK7KJZBa7aOShAFHz5Mj/hJ7XFtchpW1ZQ+u
 lBn3VMucLADJMKnDYZ6O28hZ8My3mB9vm0Wd0n0N6slRFOQHzeX2dAcvQEVMMQPV
 Ll6ddU09j5e/rNc/mQUuHhEMOS6pZjM3FISrI9QDJOc3s3wHXQSdoikTF+oBDsO3
 imfMZyGD5W1rapWDTr+i8clmGOZl5riKcsvm5LPrmlBQSZpDKphCpkooryCF7XSM
 +KYrHFSPV8iwgB4uO8/Ow8QTNfGe3pDRUo1eQ8uPryX5ZgTOZKGvpzcO4puK5iCu
 NaXkLm4KcVLq6E7yfIqhPGkiJtV3VCnFDx3D7cupk0IeZW+9Z8/4CrmeO40QcKUb
 qT8k+caijpuCDDl/gHxuHA9Ld1vSbl1VL18OrqWTfK3NbrP8o/dytINlspscy8fj
 JDExUWKVIQrhJqyP9VdYEiTFQ+A4SznE9OVdnLeCu0hM70wfqjg=
 =6H6u
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.4:

- A couple of i.MX8MN/P video clock changes from Adam Ford to fix issue
  with clock re-parenting.
- Add missing pvcie-supply regulator for imx6qdl-mba6 board.
- A series of colibri-imx8x board fixes on pin configuration.
- Set and limit the mode for PMIC bucks for imx6ull-dhcor board to fix
  stability problems.
- A couple of changes from Frank Li to correct cdns,usb3 bindings
  cdns,on-chip-buff-size property and fix USB 3.0 gadget failure on
  i.MX8QM & QXPB0.
- Add a required PHY deassert delay for imx8mn-var-som board to fix PHY
  detection failure.

* tag 'imx-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8: fix USB 3.0 Gadget Failure in QM & QXPB0 at super speed
  dt-binding: cdns,usb3: Fix cdns,on-chip-buff-size type
  arm64: dts: colibri-imx8x: delete adc1 and dsp
  arm64: dts: colibri-imx8x: fix iris pinctrl configuration
  arm64: dts: colibri-imx8x: move pinctrl property from SoM to eval board
  arm64: dts: colibri-imx8x: fix eval board pin configuration
  arm64: dts: imx8mp: Fix video clock parents
  ARM: dts: imx6qdl-mba6: Add missing pvcie-supply regulator
  ARM: dts: imx6ull-dhcor: Set and limit the mode for PMIC buck 1, 2 and 3
  arm64: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay
  arm64: dts: imx8mn: Fix video clock parents

Link: https://lore.kernel.org/r/20230516133625.GI767028@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2023-05-25 17:22:37 +02:00
commit 66bbb32978
10 changed files with 56 additions and 39 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/devicetree/bindings/usb/cdns,usb3.yaml
View File

@ -64,7 +64,7 @@ properties:
description:
size of memory intended as internal memory for endpoints
buffers expressed in KB
$ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint16
cdns,phyrst-a-enable:
description: Enable resetting of PHY if Rx fail is detected

1
arch/arm/boot/dts/imx6qdl-mba6.dtsi
View File

@ -209,6 +209,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>;
vpcie-supply = <&reg_pcie>;
status = "okay";
};

7
arch/arm/boot/dts/imx6ull-dhcor-som.dtsi
View File

@ -8,6 +8,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/regulator/dlg,da9063-regulator.h>
#include "imx6ull.dtsi"
/ {
@ -84,16 +85,20 @@
regulators {
vdd_soc_in_1v4: buck1 {
regulator-allowed-modes = <DA9063_BUCK_MODE_SLEEP>; /* PFM */
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <DA9063_BUCK_MODE_SLEEP>;
regulator-max-microvolt = <1400000>;
regulator-min-microvolt = <1400000>;
regulator-name = "vdd_soc_in_1v4";
};
vcc_3v3: buck2 {
regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "vcc_3v3";
@ -106,8 +111,10 @@
* the voltage is set to 1.5V.
*/
vcc_ddr_1v35: buck3 {
regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
regulator-max-microvolt = <1500000>;
regulator-min-microvolt = <1500000>;
regulator-name = "vcc_ddr_1v35";

1
arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
View File

@ -171,6 +171,7 @@ conn_subsys: bus@5b000000 {
interrupt-names = "host", "peripheral", "otg", "wakeup";
phys = <&usb3_phy>;
phy-names = "cdns3,usb3-phy";
cdns,on-chip-buff-size = /bits/ 16 <18>;
status = "disabled";
};
};

8
arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
View File

@ -98,11 +98,17 @@
#address-cells = <1>;
#size-cells = <0>;
ethphy: ethernet-phy@4 {
ethphy: ethernet-phy@4 { /* AR8033 or ADIN1300 */
compatible = "ethernet-phy-ieee802.3-c22";
reg = <4>;
reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
/*
* Deassert delay:
* ADIN1300 requires 5ms.
* AR8033 requires 1ms.
*/
reset-deassert-us = <20000>;
};
};
};

28
arch/arm64/boot/dts/freescale/imx8mn.dtsi
View File

@ -1069,13 +1069,6 @@
<&clk IMX8MN_CLK_DISP_APB_ROOT>,
<&clk IMX8MN_CLK_DISP_AXI_ROOT>;
clock-names = "pix", "axi", "disp_axi";
assigned-clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
<&clk IMX8MN_CLK_DISP_AXI>,
<&clk IMX8MN_CLK_DISP_APB>;
assigned-clock-parents = <&clk IMX8MN_CLK_DISP_PIXEL>,
<&clk IMX8MN_SYS_PLL2_1000M>,
<&clk IMX8MN_SYS_PLL1_800M>;
assigned-clock-rates = <594000000>, <500000000>, <200000000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_LCDIF>;
status = "disabled";
@ -1093,12 +1086,6 @@
clocks = <&clk IMX8MN_CLK_DSI_CORE>,
<&clk IMX8MN_CLK_DSI_PHY_REF>;
clock-names = "bus_clk", "sclk_mipi";
assigned-clocks = <&clk IMX8MN_CLK_DSI_CORE>,
<&clk IMX8MN_CLK_DSI_PHY_REF>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
<&clk IMX8MN_CLK_24M>;
assigned-clock-rates = <266000000>, <24000000>;
samsung,pll-clock-frequency = <24000000>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_DSI>;
status = "disabled";
@ -1142,6 +1129,21 @@
"lcdif-axi", "lcdif-apb", "lcdif-pix",
"dsi-pclk", "dsi-ref",
"csi-aclk", "csi-pclk";
assigned-clocks = <&clk IMX8MN_CLK_DSI_CORE>,
<&clk IMX8MN_CLK_DSI_PHY_REF>,
<&clk IMX8MN_CLK_DISP_PIXEL>,
<&clk IMX8MN_CLK_DISP_AXI>,
<&clk IMX8MN_CLK_DISP_APB>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
<&clk IMX8MN_CLK_24M>,
<&clk IMX8MN_VIDEO_PLL1_OUT>,
<&clk IMX8MN_SYS_PLL2_1000M>,
<&clk IMX8MN_SYS_PLL1_800M>;
assigned-clock-rates = <266000000>,
<24000000>,
<594000000>,
<500000000>,
<200000000>;
#power-domain-cells = <1>;
};

25
arch/arm64/boot/dts/freescale/imx8mp.dtsi
View File

@ -1211,13 +1211,6 @@
<&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
<&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
clock-names = "pix", "axi", "disp_axi";
assigned-clocks = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>,
<&clk IMX8MP_CLK_MEDIA_AXI>,
<&clk IMX8MP_CLK_MEDIA_APB>;
assigned-clock-parents = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
<&clk IMX8MP_SYS_PLL2_1000M>,
<&clk IMX8MP_SYS_PLL1_800M>;
assigned-clock-rates = <594000000>, <500000000>, <200000000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_1>;
status = "disabled";
@ -1237,11 +1230,6 @@
<&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
<&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
clock-names = "pix", "axi", "disp_axi";
assigned-clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
<&clk IMX8MP_VIDEO_PLL1>;
assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>,
<&clk IMX8MP_VIDEO_PLL1_REF_SEL>;
assigned-clock-rates = <0>, <1039500000>;
power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_2>;
status = "disabled";
@ -1296,11 +1284,16 @@
"disp1", "disp2", "isp", "phy";
assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>,
<&clk IMX8MP_CLK_MEDIA_APB>;
<&clk IMX8MP_CLK_MEDIA_APB>,
<&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
<&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
<&clk IMX8MP_VIDEO_PLL1>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
<&clk IMX8MP_SYS_PLL1_800M>;
assigned-clock-rates = <500000000>, <200000000>;
<&clk IMX8MP_SYS_PLL1_800M>,
<&clk IMX8MP_VIDEO_PLL1_OUT>,
<&clk IMX8MP_VIDEO_PLL1_OUT>;
assigned-clock-rates = <500000000>, <200000000>,
<0>, <0>, <1039500000>;
#power-domain-cells = <1>;
lvds_bridge: bridge@5c {

6
arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
View File

@ -33,6 +33,12 @@
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>,
<&pinctrl_lpspi2_cs2>;
};
/* Colibri SPI */
&lpspi2 {
status = "okay";

3
arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi
View File

@ -48,8 +48,7 @@
<IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28 0x20>, /* SODIMM 101 */
<IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27 0x20>, /* SODIMM 97 */
<IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03 0x06000020>, /* SODIMM 85 */
<IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26 0x20>, /* SODIMM 79 */
<IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10 0x06700041>; /* SODIMM 45 */
<IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26 0x20>; /* SODIMM 79 */
};
pinctrl_uart1_forceoff: uart1forceoffgrp {

14
arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
View File

@ -363,10 +363,6 @@
/* TODO VPU Encoder/Decoder */
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>,
<&pinctrl_hog2>, <&pinctrl_lpspi2_cs2>;
/* On-module touch pen-down interrupt */
pinctrl_ad7879_int: ad7879intgrp {
fsl,pins = <IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05 0x21>;
@ -499,8 +495,7 @@
};
pinctrl_hog1: hog1grp {
fsl,pins = <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01 0x20>, /* SODIMM 75 */
<IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x20>; /* SODIMM 93 */
fsl,pins = <IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x20>; /* SODIMM 93 */
};
pinctrl_hog2: hog2grp {
@ -774,3 +769,10 @@
fsl,pins = <IMX8QXP_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K 0x20>;
};
};
/* Delete peripherals which are not present on SOC, but are defined in imx8-ss-*.dtsi */
/delete-node/ &adc1;
/delete-node/ &adc1_lpcg;
/delete-node/ &dsp;
/delete-node/ &dsp_lpcg;