thermal/thermal_of: Allow rebooting after critical temp

Currently, the default mechanism is to trigger a shutdown after the
critical temperature is reached.

In some embedded cases, such behavior does not suit well, as the board may
be unattended in the field and rebooting may be a better approach.

The bootloader may also check the temperature and only allow the boot to
proceed when the temperature is below a certain threshold.

Introduce support for allowing a reboot to be triggered after the
critical temperature is reached.

If the "critical-action" devicetree property is not found, fall back to
the shutdown action to preserve the existing default behavior.

If a custom ops->critical exists, then it takes preference over
critical-actions.

Tested on a i.MX8MM board with the following devicetree changes:

	thermal-zones {
		cpu-thermal {
			critical-action = "reboot";
		};
	};

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231129124330.519423-4-festevam@gmail.com
This commit is contained in:
Fabio Estevam 2023-11-29 09:43:30 -03:00 committed by Daniel Lezcano
parent 79fa723ba8
commit 62e79e38b2

View File

@ -475,6 +475,7 @@ static struct thermal_zone_device *thermal_of_zone_register(struct device_node *
struct thermal_zone_params tzp = {};
struct thermal_zone_device_ops *of_ops;
struct device_node *np;
const char *action;
int delay, pdelay;
int ntrips, mask;
int ret;
@ -511,6 +512,11 @@ static struct thermal_zone_device *thermal_of_zone_register(struct device_node *
mask = GENMASK_ULL((ntrips) - 1, 0);
ret = of_property_read_string(np, "critical-action", &action);
if (!ret)
if (!of_ops->critical && !strcasecmp(action, "reboot"))
of_ops->critical = thermal_zone_device_critical_reboot;
tz = thermal_zone_device_register_with_trips(np->name, trips, ntrips,
mask, data, of_ops, &tzp,
pdelay, delay);