cxgb3: Don't call cxgb_vlan_mode until q locks are initialized

The driver calls cxgb_vlan_mode() from init_one().  This calls into
synchronize_rx(), which locks all the q locks, but the q locks are not
initialized until cxgb_up() -> setup_sge_qsets().  So move the call to
cxgb_vlan_mode() into cxgb_up(), after the call to setup_sge_qsets().
We also move the body of these functions up higher to avoid having to
a forward declaration.

This was found because of the lockdep warning:

    INFO: trying to register non-static key.
    the code is fine but needs lockdep annotation.
    turning off the locking correctness validator.
    Pid: 323, comm: work_for_cpu Not tainted 3.4.0-rc5 #28
    Call Trace:
     [<ffffffff8106e767>] register_lock_class+0x108/0x2d0
     [<ffffffff8106ff42>] __lock_acquire+0xd3/0xd06
     [<ffffffff81070fd0>] lock_acquire+0xbf/0xfe
     [<ffffffff813862a6>] _raw_spin_lock_irq+0x36/0x45
     [<ffffffffa01e71aa>] cxgb_vlan_mode+0x96/0xcb [cxgb3]
     [<ffffffffa01f90eb>] init_one+0x8c4/0x980 [cxgb3]
     [<ffffffff811fcbf0>] local_pci_probe+0x3f/0x70
     [<ffffffff81042206>] do_work_for_cpu+0x10/0x22
     [<ffffffff810482de>] kthread+0xa1/0xa9
     [<ffffffff8138e234>] kernel_thread_helper+0x4/0x10

Contrary to what lockdep says, the code is not fine: we are locking an
uninitialized spinlock.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Roland Dreier 2012-04-30 07:15:47 +00:00 committed by David S. Miller
parent 787cb2a9eb
commit 60158e6464

View File

@ -1149,6 +1149,48 @@ release_tpsram:
return ret;
}
/**
* t3_synchronize_rx - wait for current Rx processing on a port to complete
* @adap: the adapter
* @p: the port
*
* Ensures that current Rx processing on any of the queues associated with
* the given port completes before returning. We do this by acquiring and
* releasing the locks of the response queues associated with the port.
*/
static void t3_synchronize_rx(struct adapter *adap, const struct port_info *p)
{
int i;
for (i = p->first_qset; i < p->first_qset + p->nqsets; i++) {
struct sge_rspq *q = &adap->sge.qs[i].rspq;
spin_lock_irq(&q->lock);
spin_unlock_irq(&q->lock);
}
}
static void cxgb_vlan_mode(struct net_device *dev, netdev_features_t features)
{
struct port_info *pi = netdev_priv(dev);
struct adapter *adapter = pi->adapter;
if (adapter->params.rev > 0) {
t3_set_vlan_accel(adapter, 1 << pi->port_id,
features & NETIF_F_HW_VLAN_RX);
} else {
/* single control for all ports */
unsigned int i, have_vlans = features & NETIF_F_HW_VLAN_RX;
for_each_port(adapter, i)
have_vlans |=
adapter->port[i]->features & NETIF_F_HW_VLAN_RX;
t3_set_vlan_accel(adapter, 1, have_vlans);
}
t3_synchronize_rx(adapter, pi);
}
/**
* cxgb_up - enable the adapter
* @adapter: adapter being enabled
@ -1161,7 +1203,7 @@ release_tpsram:
*/
static int cxgb_up(struct adapter *adap)
{
int err;
int i, err;
if (!(adap->flags & FULL_INIT_DONE)) {
err = t3_check_fw_version(adap);
@ -1198,6 +1240,9 @@ static int cxgb_up(struct adapter *adap)
if (err)
goto out;
for_each_port(adap, i)
cxgb_vlan_mode(adap->port[i], adap->port[i]->features);
setup_rss(adap);
if (!(adap->flags & NAPI_INIT))
init_napi(adap);
@ -2508,48 +2553,6 @@ static int cxgb_set_mac_addr(struct net_device *dev, void *p)
return 0;
}
/**
* t3_synchronize_rx - wait for current Rx processing on a port to complete
* @adap: the adapter
* @p: the port
*
* Ensures that current Rx processing on any of the queues associated with
* the given port completes before returning. We do this by acquiring and
* releasing the locks of the response queues associated with the port.
*/
static void t3_synchronize_rx(struct adapter *adap, const struct port_info *p)
{
int i;
for (i = p->first_qset; i < p->first_qset + p->nqsets; i++) {
struct sge_rspq *q = &adap->sge.qs[i].rspq;
spin_lock_irq(&q->lock);
spin_unlock_irq(&q->lock);
}
}
static void cxgb_vlan_mode(struct net_device *dev, netdev_features_t features)
{
struct port_info *pi = netdev_priv(dev);
struct adapter *adapter = pi->adapter;
if (adapter->params.rev > 0) {
t3_set_vlan_accel(adapter, 1 << pi->port_id,
features & NETIF_F_HW_VLAN_RX);
} else {
/* single control for all ports */
unsigned int i, have_vlans = features & NETIF_F_HW_VLAN_RX;
for_each_port(adapter, i)
have_vlans |=
adapter->port[i]->features & NETIF_F_HW_VLAN_RX;
t3_set_vlan_accel(adapter, 1, have_vlans);
}
t3_synchronize_rx(adapter, pi);
}
static netdev_features_t cxgb_fix_features(struct net_device *dev,
netdev_features_t features)
{
@ -3353,9 +3356,6 @@ static int __devinit init_one(struct pci_dev *pdev,
err = sysfs_create_group(&adapter->port[0]->dev.kobj,
&cxgb3_attr_group);
for_each_port(adapter, i)
cxgb_vlan_mode(adapter->port[i], adapter->port[i]->features);
print_port_info(adapter, ai);
return 0;