Merge remote-tracking branch 'regulator/for-5.8' into regulator-linus

2024-11-25 05:32:00 +00:00 · 2020-06-01 13:01:44 +01:00 · 2020-06-01 13:01:44 +01:00 · 5fb565b69d
commit 5fb565b69d
parent cc58045486 0b0c0bd818
69 changed files with 1648 additions and 377 deletions
--- a/Documentation/devicetree/bindings/mfd/max8998.txt
+++ b/Documentation/devicetree/bindings/mfd/max8998.txt
@ -73,6 +73,8 @@ number as described in MAX8998 datasheet.
 	- ESAFEOUT1: (ldo19)
 	- ESAFEOUT2: (ld020)

+	- CHARGER: main battery charger current control
+
 Standard regulator bindings are used inside regulator subnodes. Check
  Documentation/devicetree/bindings/regulator/regulator.txt
 for more details.
@ -113,5 +115,11 @@ Example:
 				regulator-always-on;
 				regulator-boot-on;
 			};
+
+			charger_reg: CHARGER {
+				regulator-name = "CHARGER";
+				regulator-min-microamp = <90000>;
+				regulator-max-microamp = <800000>;
+			};
 		};
 	};
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
@ -1,40 +0,0 @@
-Anatop Voltage regulators
-
-Required properties:
- compatible: Must be "fsl,anatop-regulator"
- regulator-name: A string used as a descriptive name for regulator outputs
- anatop-reg-offset: Anatop MFD register offset
- anatop-vol-bit-shift: Bit shift for the register
- anatop-vol-bit-width: Number of bits used in the register
- anatop-min-bit-val: Minimum value of this register
- anatop-min-voltage: Minimum voltage of this regulator
- anatop-max-voltage: Maximum voltage of this regulator
-
-Optional properties:
- anatop-delay-reg-offset: Anatop MFD step time register offset
- anatop-delay-bit-shift: Bit shift for the step time register
- anatop-delay-bit-width: Number of bits used in the step time register
- vin-supply: The supply for this regulator
- anatop-enable-bit: Regulator enable bit offset
-
-Any property defined as part of the core regulator
-binding, defined in regulator.txt, can also be used.
-
-Example:
-
-	regulator-vddpu {
-		compatible = "fsl,anatop-regulator";
-		regulator-name = "vddpu";
-		regulator-min-microvolt = <725000>;
-		regulator-max-microvolt = <1300000>;
-		regulator-always-on;
-		anatop-reg-offset = <0x140>;
-		anatop-vol-bit-shift = <9>;
-		anatop-vol-bit-width = <5>;
-		anatop-delay-reg-offset = <0x170>;
-		anatop-delay-bit-shift = <24>;
-		anatop-delay-bit-width = <2>;
-		anatop-min-bit-val = <1>;
-		anatop-min-voltage = <725000>;
-		anatop-max-voltage = <1300000>;
-	};
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/anatop-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Anatop Voltage Regulators
+
+maintainers:
+  - Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+properties:
+  compatible:
+    const: fsl,anatop-regulator
+
+  regulator-name: true
+
+  anatop-reg-offset:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the anatop MFD register offset.
+
+  anatop-vol-bit-shift:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the bit shift for the register.
+
+  anatop-vol-bit-width:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the number of bits used in the register.
+
+  anatop-min-bit-val:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the minimum value of this register.
+
+  anatop-min-voltage:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the minimum voltage of this regulator.
+
+  anatop-max-voltage:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the maximum voltage of this regulator.
+
+  anatop-delay-reg-offset:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the anatop MFD step time register offset.
+
+  anatop-delay-bit-shift:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the bit shift for the step time register.
+
+  anatop-delay-bit-width:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the number of bits used in the step time register.
+
+  anatop-enable-bit:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing regulator enable bit offset.
+
+  vin-supply:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: input supply phandle.
+
+required:
+  - compatible
+  - regulator-name
+  - anatop-reg-offset
+  - anatop-vol-bit-shift
+  - anatop-vol-bit-width
+  - anatop-min-bit-val
+  - anatop-min-voltage
+  - anatop-max-voltage
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    regulator-vddpu {
+        compatible = "fsl,anatop-regulator";
+        regulator-name = "vddpu";
+        regulator-min-microvolt = <725000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-always-on;
+        anatop-reg-offset = <0x140>;
+        anatop-vol-bit-shift = <9>;
+        anatop-vol-bit-width = <5>;
+        anatop-delay-reg-offset = <0x170>;
+        anatop-delay-bit-shift = <24>;
+        anatop-delay-bit-width = <2>;
+        anatop-min-bit-val = <1>;
+        anatop-min-voltage = <725000>;
+        anatop-max-voltage = <1300000>;
+    };
--- a/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml
@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77826.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX77826 PMIC
+
+maintainers:
+  - Iskren Chernev <iskren.chernev@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]{1,2}"
+  compatible:
+    enum:
+      - maxim,max77826
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    allOf:
+      - $ref: regulator.yaml#
+    description: |
+      list of regulators provided by this controller, must be named
+      after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST
+
+    patternProperties:
+      "^LDO([1-9]|1[0-5])$":
+        type: object
+        allOf:
+          - $ref: regulator.yaml#
+
+      "^BUCK|BUCKBOOST$":
+        type: object
+        allOf:
+          - $ref: regulator.yaml#
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@69 {
+            compatible = "maxim,max77826";
+            reg = <0x69>;
+
+            regulators {
+                LDO2 {
+                    regulator-min-microvolt = <650000>;
+                    regulator-max-microvolt = <3587500>;
+                };
+            };
+       };
+     };
+...
--- a/7
+++ b/7
@ -9725,6 +9725,13 @@ F:	drivers/lightnvm/
 F:	include/linux/lightnvm.h
 F:	include/uapi/linux/lightnvm.h

+LINEAR RANGES HELPERS
+M:	Mark Brown <broonie@kernel.org>
+R:	Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+F:	lib/linear_ranges.c
+F:	lib/test_linear_ranges.c
+F:	include/linux/linear_range.h
+
 LINUX FOR POWER MACINTOSH
 M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
 L:	linuxppc-dev@lists.ozlabs.org
--- a/drivers/power/supply/bd70528-charger.c
+++ b/drivers/power/supply/bd70528-charger.c
@ -335,14 +335,14 @@ static int bd70528_get_present(struct bd70528_psy *bdpsy, int *val)
 	return 0;
 }

-struct linear_range {
+struct bd70528_linear_range {
 	int min;
 	int step;
 	int vals;
 	int low_sel;
 };

-static const struct linear_range current_limit_ranges[] = {
+static const struct bd70528_linear_range current_limit_ranges[] = {
 	{
 		.min = 5,
 		.step = 1,
@ -374,7 +374,7 @@ static const struct linear_range current_limit_ranges[] = {
 * voltage for low temperatures. The driver currently only reads
 * the charge current at room temperature. We do set both though.
 */
-static const struct linear_range warm_charge_curr[] = {
+static const struct bd70528_linear_range warm_charge_curr[] = {
 	{
 		.min = 10,
 		.step = 10,
@ -398,7 +398,7 @@ static const struct linear_range warm_charge_curr[] = {
 #define MAX_WARM_CHG_CURR_SEL 0x1f
 #define MIN_CHG_CURR_SEL 0x0

-static int find_value_for_selector_low(const struct linear_range *r,
+static int find_value_for_selector_low(const struct bd70528_linear_range *r,
 				       int selectors, unsigned int sel,
 				       unsigned int *val)
 {
@ -420,7 +420,7 @@ static int find_value_for_selector_low(const struct linear_range *r,
 * I guess it is enough if we use voltage/current which is closest (below)
 * the requested?
 */
-static int find_selector_for_value_low(const struct linear_range *r,
+static int find_selector_for_value_low(const struct bd70528_linear_range *r,
 				       int selectors, unsigned int val,
 				       unsigned int *sel, bool *found)
 {
--- a/drivers/regulator/88pg86x.c
+++ b/drivers/regulator/88pg86x.c
@ -11,13 +11,13 @@ static const struct regulator_ops pg86x_ops = {
 	.list_voltage = regulator_list_voltage_linear_range,
 };

-static const struct regulator_linear_range pg86x_buck1_ranges[] = {
+static const struct linear_range pg86x_buck1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(      0,  0, 10,     0),
 	REGULATOR_LINEAR_RANGE(1000000, 11, 34, 25000),
 	REGULATOR_LINEAR_RANGE(1600000, 35, 47, 50000),
 };

-static const struct regulator_linear_range pg86x_buck2_ranges[] = {
+static const struct linear_range pg86x_buck2_ranges[] = {
 	REGULATOR_LINEAR_RANGE(      0,  0, 15,     0),
 	REGULATOR_LINEAR_RANGE(1000000, 16, 39, 25000),
 	REGULATOR_LINEAR_RANGE(1600000, 40, 52, 50000),
--- a/drivers/regulator/88pm800-regulator.c
+++ b/drivers/regulator/88pm800-regulator.c
@ -134,13 +134,13 @@ struct pm800_regulator_info {
 }

 /* Ranges are sorted in ascending order. */
-static const struct regulator_linear_range buck1_volt_range[] = {
+static const struct linear_range buck1_volt_range[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 0x4f, 12500),
 	REGULATOR_LINEAR_RANGE(1600000, 0x50, 0x54, 50000),
 };

 /* BUCK 2~5 have same ranges. */
-static const struct regulator_linear_range buck2_5_volt_range[] = {
+static const struct linear_range buck2_5_volt_range[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 0x4f, 12500),
 	REGULATOR_LINEAR_RANGE(1600000, 0x50, 0x72, 50000),
 };
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig REGULATOR
 	bool "Voltage and Current Regulator Support"
+	select LINEAR_RANGES
 	help
 	  Generic Voltage and Current Regulator support.

@ -585,6 +586,16 @@ config REGULATOR_MAX77802
 	  Exynos5420/Exynos5800 SoCs to control various voltages.
 	  It includes support for control of voltage and ramp speed.

+config REGULATOR_MAX77826
+	tristate "Maxim 77826 regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver controls a Maxim 77826 regulator via I2C bus.
+	  The regulator include 15 LDOs, BUCK and BUCK BOOST regulator.
+	  It includes support for control of output voltage. This
+	  regulator is found on the Samsung Galaxy S5 (klte) smartphone.
+
 config REGULATOR_MC13XXX_CORE
 	tristate

--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@ -74,6 +74,7 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
 obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77693) += max77693-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o
+obj-$(CONFIG_REGULATOR_MAX77826) += max77826-regulator.o
 obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@ -139,17 +139,6 @@ static const unsigned int ldo_vintcore_voltages[] = {
 	1350000,
 };

-static const unsigned int ldo_sdio_voltages[] = {
-	1160000,
-	1050000,
-	1100000,
-	1500000,
-	1800000,
-	2200000,
-	2910000,
-	3050000,
-};
-
 static const unsigned int fixed_1200000_voltage[] = {
 	1200000,
 };
@ -166,10 +155,6 @@ static const unsigned int fixed_2050000_voltage[] = {
 	2050000,
 };

-static const unsigned int fixed_3300000_voltage[] = {
-	3300000,
-};
-
 static const unsigned int ldo_vana_voltages[] = {
 	1050000,
 	1075000,
@ -192,13 +177,6 @@ static const unsigned int ldo_vaudio_voltages[] = {
 	2600000,	/* Duplicated in Vaudio and IsoUicc Control register. */
 };

-static const unsigned int ldo_vdmic_voltages[] = {
-	1800000,
-	1900000,
-	2000000,
-	2850000,
-};
-
 static DEFINE_MUTEX(shared_mode_mutex);
 static struct ab8500_shared_mode ldo_anamic1_shared;
 static struct ab8500_shared_mode ldo_anamic2_shared;
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@ -220,13 +220,13 @@ static const struct regmap_config act8865_regmap_config = {
 	.val_bits = 8,
 };

-static const struct regulator_linear_range act8865_voltage_ranges[] = {
+static const struct linear_range act8865_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
 	REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
 	REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
 };

-static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
+static const struct linear_range act8600_sudcdc_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0),
 	REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000),
 	REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000),
--- a/drivers/regulator/act8945a-regulator.c
+++ b/drivers/regulator/act8945a-regulator.c
@ -73,7 +73,7 @@ struct act8945a_pmic {
 	u32 op_mode[ACT8945A_ID_MAX];
 };

-static const struct regulator_linear_range act8945a_voltage_ranges[] = {
+static const struct linear_range act8945a_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
 	REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
 	REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@ -87,7 +87,7 @@ static const struct regulator_ops arizona_ldo1_hc_ops = {
 	.set_bypass = regulator_set_bypass_regmap,
 };

-static const struct regulator_linear_range arizona_ldo1_hc_ranges[] = {
+static const struct linear_range arizona_ldo1_hc_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0, 0x6, 50000),
 	REGULATOR_LINEAR_RANGE(1800000, 0x7, 0x7, 0),
 };
--- a/drivers/regulator/arizona-micsupp.c
+++ b/drivers/regulator/arizona-micsupp.c
@ -125,7 +125,7 @@ static const struct regulator_ops arizona_micsupp_ops = {
 	.set_bypass = arizona_micsupp_set_bypass,
 };

-static const struct regulator_linear_range arizona_micsupp_ranges[] = {
+static const struct linear_range arizona_micsupp_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1700000, 0,    0x1e, 50000),
 	REGULATOR_LINEAR_RANGE(3300000, 0x1f, 0x1f, 0),
 };
@ -152,7 +152,7 @@ static const struct regulator_desc arizona_micsupp = {
 	.owner = THIS_MODULE,
 };

-static const struct regulator_linear_range arizona_micsupp_ext_ranges[] = {
+static const struct linear_range arizona_micsupp_ext_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000,  0,    0x14, 25000),
 	REGULATOR_LINEAR_RANGE(1500000, 0x15, 0x27, 100000),
 };
--- a/drivers/regulator/as3711-regulator.c
+++ b/drivers/regulator/as3711-regulator.c
@ -103,18 +103,18 @@ static const struct regulator_ops as3711_dldo_ops = {
 	.map_voltage		= regulator_map_voltage_linear_range,
 };

-static const struct regulator_linear_range as3711_sd_ranges[] = {
+static const struct linear_range as3711_sd_ranges[] = {
 	REGULATOR_LINEAR_RANGE(612500, 0x1, 0x40, 12500),
 	REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000),
 	REGULATOR_LINEAR_RANGE(2650000, 0x71, 0x7f, 50000),
 };

-static const struct regulator_linear_range as3711_aldo_ranges[] = {
+static const struct linear_range as3711_aldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1200000, 0, 0xf, 50000),
 	REGULATOR_LINEAR_RANGE(1800000, 0x10, 0x1f, 100000),
 };

-static const struct regulator_linear_range as3711_dldo_ranges[] = {
+static const struct linear_range as3711_dldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0, 0x10, 50000),
 	REGULATOR_LINEAR_RANGE(1750000, 0x20, 0x3f, 50000),
 };
--- a/drivers/regulator/as3722-regulator.c
+++ b/drivers/regulator/as3722-regulator.c
@ -389,7 +389,7 @@ static const struct regulator_ops as3722_ldo6_extcntrl_ops = {
 	.set_bypass = regulator_set_bypass_regmap,
 };

-static const struct regulator_linear_range as3722_ldo_ranges[] = {
+static const struct linear_range as3722_ldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x00, 0x00, 0),
 	REGULATOR_LINEAR_RANGE(825000, 0x01, 0x24, 25000),
 	REGULATOR_LINEAR_RANGE(1725000, 0x40, 0x7F, 25000),
@ -487,7 +487,7 @@ static bool as3722_sd0_is_low_voltage(struct as3722_regulators *as3722_regs)
 	return false;
 }

-static const struct regulator_linear_range as3722_sd2345_ranges[] = {
+static const struct linear_range as3722_sd2345_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x00, 0x00, 0),
 	REGULATOR_LINEAR_RANGE(612500, 0x01, 0x40, 12500),
 	REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000),
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@ -510,7 +510,7 @@ static const struct regulator_ops axp20x_ops_sw = {
 	.is_enabled		= regulator_is_enabled_regmap,
 };

-static const struct regulator_linear_range axp20x_ldo4_ranges[] = {
+static const struct linear_range axp20x_ldo4_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1250000,
 			       AXP20X_LDO4_V_OUT_1250mV_START,
 			       AXP20X_LDO4_V_OUT_1250mV_END,
@ -638,7 +638,7 @@ static const struct regulator_desc axp22x_drivevbus_regulator = {
 };

 /* DCDC ranges shared with AXP813 */
-static const struct regulator_linear_range axp803_dcdc234_ranges[] = {
+static const struct linear_range axp803_dcdc234_ranges[] = {
 	REGULATOR_LINEAR_RANGE(500000,
 			       AXP803_DCDC234_500mV_START,
 			       AXP803_DCDC234_500mV_END,
@ -649,7 +649,7 @@ static const struct regulator_linear_range axp803_dcdc234_ranges[] = {
 			       20000),
 };

-static const struct regulator_linear_range axp803_dcdc5_ranges[] = {
+static const struct linear_range axp803_dcdc5_ranges[] = {
 	REGULATOR_LINEAR_RANGE(800000,
 			       AXP803_DCDC5_800mV_START,
 			       AXP803_DCDC5_800mV_END,
@ -660,7 +660,7 @@ static const struct regulator_linear_range axp803_dcdc5_ranges[] = {
 			       20000),
 };

-static const struct regulator_linear_range axp803_dcdc6_ranges[] = {
+static const struct linear_range axp803_dcdc6_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000,
 			       AXP803_DCDC6_600mV_START,
 			       AXP803_DCDC6_600mV_END,
@ -672,7 +672,7 @@ static const struct regulator_linear_range axp803_dcdc6_ranges[] = {
 };

 /* AXP806's CLDO2 and AXP809's DLDO1 share the same range */
-static const struct regulator_linear_range axp803_dldo2_ranges[] = {
+static const struct linear_range axp803_dldo2_ranges[] = {
 	REGULATOR_LINEAR_RANGE(700000,
 			       AXP803_DLDO2_700mV_START,
 			       AXP803_DLDO2_700mV_END,
@ -758,7 +758,7 @@ static const struct regulator_desc axp803_regulators[] = {
 	AXP_DESC_FIXED(AXP803, RTC_LDO, "rtc-ldo", "ips", 3000),
 };

-static const struct regulator_linear_range axp806_dcdca_ranges[] = {
+static const struct linear_range axp806_dcdca_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000,
 			       AXP806_DCDCA_600mV_START,
 			       AXP806_DCDCA_600mV_END,
@ -769,7 +769,7 @@ static const struct regulator_linear_range axp806_dcdca_ranges[] = {
 			       20000),
 };

-static const struct regulator_linear_range axp806_dcdcd_ranges[] = {
+static const struct linear_range axp806_dcdcd_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000,
 			       AXP806_DCDCD_600mV_START,
 			       AXP806_DCDCD_600mV_END,
@ -834,7 +834,7 @@ static const struct regulator_desc axp806_regulators[] = {
 		    AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_SW_MASK),
 };

-static const struct regulator_linear_range axp809_dcdc4_ranges[] = {
+static const struct linear_range axp809_dcdc4_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000,
 			       AXP809_DCDC4_600mV_START,
 			       AXP809_DCDC4_600mV_END,
--- a/drivers/regulator/bcm590xx-regulator.c
+++ b/drivers/regulator/bcm590xx-regulator.c
@ -116,14 +116,14 @@ static const unsigned int ldo_vbus[] = {
 };

 /* DCDC group CSR: supported voltages in microvolts */
-static const struct regulator_linear_range dcdc_csr_ranges[] = {
+static const struct linear_range dcdc_csr_ranges[] = {
 	REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000),
 	REGULATOR_LINEAR_RANGE(1360000, 51, 55, 20000),
 	REGULATOR_LINEAR_RANGE(900000, 56, 63, 0),
 };

 /* DCDC group IOSR1: supported voltages in microvolts */
-static const struct regulator_linear_range dcdc_iosr1_ranges[] = {
+static const struct linear_range dcdc_iosr1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(860000, 2, 51, 10000),
 	REGULATOR_LINEAR_RANGE(1500000, 52, 52, 0),
 	REGULATOR_LINEAR_RANGE(1800000, 53, 53, 0),
@ -131,7 +131,7 @@ static const struct regulator_linear_range dcdc_iosr1_ranges[] = {
 };

 /* DCDC group SDSR1: supported voltages in microvolts */
-static const struct regulator_linear_range dcdc_sdsr1_ranges[] = {
+static const struct linear_range dcdc_sdsr1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000),
 	REGULATOR_LINEAR_RANGE(1340000, 51, 51, 0),
 	REGULATOR_LINEAR_RANGE(900000, 52, 63, 0),
@ -143,7 +143,7 @@ struct bcm590xx_info {
 	u8 n_voltages;
 	const unsigned int *volt_table;
 	u8 n_linear_ranges;
-	const struct regulator_linear_range *linear_ranges;
+	const struct linear_range *linear_ranges;
 };

 #define BCM590XX_REG_TABLE(_name, _table) \
--- a/drivers/regulator/bd70528-regulator.c
+++ b/drivers/regulator/bd70528-regulator.c
@ -20,22 +20,22 @@
 #define BUCK_RAMPRATE_125MV 1
 #define BUCK_RAMP_MAX 250

-static const struct regulator_linear_range bd70528_buck1_volts[] = {
+static const struct linear_range bd70528_buck1_volts[] = {
 	REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 600000),
 	REGULATOR_LINEAR_RANGE(2750000, 0x2, 0xf, 50000),
 };
-static const struct regulator_linear_range bd70528_buck2_volts[] = {
+static const struct linear_range bd70528_buck2_volts[] = {
 	REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 300000),
 	REGULATOR_LINEAR_RANGE(1550000, 0x2, 0xd, 50000),
 	REGULATOR_LINEAR_RANGE(3000000, 0xe, 0xf, 300000),
 };
-static const struct regulator_linear_range bd70528_buck3_volts[] = {
+static const struct linear_range bd70528_buck3_volts[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0x00, 0xd, 50000),
 	REGULATOR_LINEAR_RANGE(1800000, 0xe, 0xf, 0),
 };

 /* All LDOs have same voltage ranges */
-static const struct regulator_linear_range bd70528_ldo_volts[] = {
+static const struct linear_range bd70528_ldo_volts[] = {
 	REGULATOR_LINEAR_RANGE(1650000, 0x0, 0x07, 50000),
 	REGULATOR_LINEAR_RANGE(2100000, 0x8, 0x0f, 100000),
 	REGULATOR_LINEAR_RANGE(2850000, 0x10, 0x19, 50000),
--- a/drivers/regulator/bd71828-regulator.c
+++ b/drivers/regulator/bd71828-regulator.c
@ -65,27 +65,27 @@ static const struct reg_init buck7_inits[] = {
 	},
 };

-static const struct regulator_linear_range bd71828_buck1267_volts[] = {
+static const struct linear_range bd71828_buck1267_volts[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0x00, 0xef, 6250),
 	REGULATOR_LINEAR_RANGE(2000000, 0xf0, 0xff, 0),
 };

-static const struct regulator_linear_range bd71828_buck3_volts[] = {
+static const struct linear_range bd71828_buck3_volts[] = {
 	REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x0f, 50000),
 	REGULATOR_LINEAR_RANGE(2000000, 0x10, 0x1f, 0),
 };

-static const struct regulator_linear_range bd71828_buck4_volts[] = {
+static const struct linear_range bd71828_buck4_volts[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0x00, 0x1f, 25000),
 	REGULATOR_LINEAR_RANGE(1800000, 0x20, 0x3f, 0),
 };

-static const struct regulator_linear_range bd71828_buck5_volts[] = {
+static const struct linear_range bd71828_buck5_volts[] = {
 	REGULATOR_LINEAR_RANGE(2500000, 0x00, 0x0f, 50000),
 	REGULATOR_LINEAR_RANGE(3300000, 0x10, 0x1f, 0),
 };

-static const struct regulator_linear_range bd71828_ldo_volts[] = {
+static const struct linear_range bd71828_ldo_volts[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0x00, 0x31, 50000),
 	REGULATOR_LINEAR_RANGE(3300000, 0x32, 0x3f, 0),
 };
--- a/drivers/regulator/bd718x7-regulator.c
+++ b/drivers/regulator/bd718x7-regulator.c
@ -55,12 +55,20 @@ static int bd718xx_buck1234_set_ramp_delay(struct regulator_dev *rdev,
 				  BUCK_RAMPRATE_MASK, ramp_value << 6);
 }

-/* Bucks 1 to 4 support DVS. PWM mode is used when voltage is changed.
+/*
+ * On BD71837 (not on BD71847, BD71850, ...)
+ * Bucks 1 to 4 support DVS. PWM mode is used when voltage is changed.
 * Bucks 5 to 8 and LDOs can use PFM and must be disabled when voltage
 * is changed. Hence we return -EBUSY for these if voltage is changed
 * when BUCK/LDO is enabled.
+ *
+ * On BD71847, BD71850, ... The LDO voltage can be changed when LDO is
+ * enabled. But if voltage is increased the LDO power-good monitoring
+ * must be disabled for the duration of changing + 1mS to ensure voltage
+ * has reached the higher level before HW does next under voltage detection
+ * cycle.
 */
-static int bd718xx_set_voltage_sel_restricted(struct regulator_dev *rdev,
+static int bd71837_set_voltage_sel_restricted(struct regulator_dev *rdev,
 						    unsigned int sel)
 {
 	if (regulator_is_enabled_regmap(rdev))
@ -69,8 +77,123 @@ static int bd718xx_set_voltage_sel_restricted(struct regulator_dev *rdev,
 	return regulator_set_voltage_sel_regmap(rdev, sel);
 }

+static void voltage_change_done(struct regulator_dev *rdev, unsigned int sel,
+				unsigned int *mask)
+{
+	int ret;
+
+	if (*mask) {
+		/*
+		 * Let's allow scheduling as we use I2C anyways. We just need to
+		 * guarantee minimum of 1ms sleep - it shouldn't matter if we
+		 * exceed it due to the scheduling.
+		 */
+		msleep(1);
+		/*
+		 * Note for next hacker. The PWRGOOD should not be masked on
+		 * BD71847 so we will just unconditionally enable detection
+		 * when voltage is set.
+		 * If someone want's to disable PWRGOOD he must implement
+		 * caching and restoring the old value here. I am not
+		 * aware of such use-cases so for the sake of the simplicity
+		 * we just always enable PWRGOOD here.
+		 */
+		ret = regmap_update_bits(rdev->regmap, BD718XX_REG_MVRFLTMASK2,
+					 *mask, 0);
+		if (ret)
+			dev_err(&rdev->dev,
+				"Failed to re-enable voltage monitoring (%d)\n",
+				ret);
+	}
+}
+
+static int voltage_change_prepare(struct regulator_dev *rdev, unsigned int sel,
+				  unsigned int *mask)
+{
+	int ret;
+
+	*mask = 0;
+	if (regulator_is_enabled_regmap(rdev)) {
+		int now, new;
+
+		now = rdev->desc->ops->get_voltage_sel(rdev);
+		if (now < 0)
+			return now;
+
+		now = rdev->desc->ops->list_voltage(rdev, now);
+		if (now < 0)
+			return now;
+
+		new = rdev->desc->ops->list_voltage(rdev, sel);
+		if (new < 0)
+			return new;
+
+		/*
+		 * If we increase LDO voltage when LDO is enabled we need to
+		 * disable the power-good detection until voltage has reached
+		 * the new level. According to HW colleagues the maximum time
+		 * it takes is 1000us. I assume that on systems with light load
+		 * this might be less - and we could probably use DT to give
+		 * system specific delay value if performance matters.
+		 *
+		 * Well, knowing we use I2C here and can add scheduling delays
+		 * I don't think it is worth the hassle and I just add fixed
+		 * 1ms sleep here (and allow scheduling). If this turns out to
+		 * be a problem we can change it to delay and make the delay
+		 * time configurable.
+		 */
+		if (new > now) {
+			int ldo_offset = rdev->desc->id - BD718XX_LDO1;
+
+			*mask = BD718XX_LDO1_VRMON80 << ldo_offset;
+			ret = regmap_update_bits(rdev->regmap,
+						 BD718XX_REG_MVRFLTMASK2,
+						 *mask, *mask);
+			if (ret) {
+				dev_err(&rdev->dev,
+					"Failed to stop voltage monitoring\n");
+				return ret;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int bd718xx_set_voltage_sel_restricted(struct regulator_dev *rdev,
+						    unsigned int sel)
+{
+	int ret;
+	int mask;
+
+	ret = voltage_change_prepare(rdev, sel, &mask);
+	if (ret)
+		return ret;
+
+	ret = regulator_set_voltage_sel_regmap(rdev, sel);
+	voltage_change_done(rdev, sel, &mask);
+
+	return ret;
+}
+
 static int bd718xx_set_voltage_sel_pickable_restricted(
 		struct regulator_dev *rdev, unsigned int sel)
+{
+	int ret;
+	int mask;
+
+	ret = voltage_change_prepare(rdev, sel, &mask);
+	if (ret)
+		return ret;
+
+	ret = regulator_set_voltage_sel_pickable_regmap(rdev, sel);
+	voltage_change_done(rdev, sel, &mask);
+
+	return ret;
+}
+
+static int bd71837_set_voltage_sel_pickable_restricted(
+		struct regulator_dev *rdev, unsigned int sel)
 {
 	if (regulator_is_enabled_regmap(rdev))
 		return -EBUSY;
@ -85,6 +208,16 @@ static const struct regulator_ops bd718xx_pickable_range_ldo_ops = {
 	.list_voltage = regulator_list_voltage_pickable_linear_range,
 	.set_voltage_sel = bd718xx_set_voltage_sel_pickable_restricted,
 	.get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
+
+};
+
+static const struct regulator_ops bd71837_pickable_range_ldo_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_pickable_linear_range,
+	.set_voltage_sel = bd71837_set_voltage_sel_pickable_restricted,
+	.get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
 };

 static const struct regulator_ops bd718xx_pickable_range_buck_ops = {
@ -92,11 +225,30 @@ static const struct regulator_ops bd718xx_pickable_range_buck_ops = {
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 	.list_voltage = regulator_list_voltage_pickable_linear_range,
-	.set_voltage_sel = bd718xx_set_voltage_sel_pickable_restricted,
+	.set_voltage_sel = regulator_set_voltage_sel_pickable_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
 	.set_voltage_time_sel = regulator_set_voltage_time_sel,
 };

+static const struct regulator_ops bd71837_pickable_range_buck_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_pickable_linear_range,
+	.set_voltage_sel = bd71837_set_voltage_sel_pickable_restricted,
+	.get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static const struct regulator_ops bd71837_ldo_regulator_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.set_voltage_sel = bd71837_set_voltage_sel_restricted,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
 static const struct regulator_ops bd718xx_ldo_regulator_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@ -106,6 +258,15 @@ static const struct regulator_ops bd718xx_ldo_regulator_ops = {
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 };

+static const struct regulator_ops bd71837_ldo_regulator_nolinear_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_table,
+	.set_voltage_sel = bd71837_set_voltage_sel_restricted,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
 static const struct regulator_ops bd718xx_ldo_regulator_nolinear_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@ -120,12 +281,33 @@ static const struct regulator_ops bd718xx_buck_regulator_ops = {
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 	.list_voltage = regulator_list_voltage_linear_range,
-	.set_voltage_sel = bd718xx_set_voltage_sel_restricted,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static const struct regulator_ops bd71837_buck_regulator_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.set_voltage_sel = bd71837_set_voltage_sel_restricted,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_time_sel = regulator_set_voltage_time_sel,
 };

 static const struct regulator_ops bd718xx_buck_regulator_nolinear_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_ascend,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static const struct regulator_ops bd71837_buck_regulator_nolinear_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
@ -152,7 +334,7 @@ static const struct regulator_ops bd718xx_dvs_buck_regulator_ops = {
 * BD71847 BUCK1/2
 * 0.70 to 1.30V (10mV step)
 */
-static const struct regulator_linear_range bd718xx_dvs_buck_volts[] = {
+static const struct linear_range bd718xx_dvs_buck_volts[] = {
 	REGULATOR_LINEAR_RANGE(700000, 0x00, 0x3C, 10000),
 	REGULATOR_LINEAR_RANGE(1300000, 0x3D, 0x3F, 0),
 };
@ -163,7 +345,7 @@ static const struct regulator_linear_range bd718xx_dvs_buck_volts[] = {
 * and
 * 0.675 to 1.325 (range 1)
 */
-static const struct regulator_linear_range bd71837_buck5_volts[] = {
+static const struct linear_range bd71837_buck5_volts[] = {
 	/* Ranges when VOLT_SEL bit is 0 */
 	REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000),
 	REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000),
@ -185,7 +367,7 @@ static const unsigned int bd71837_buck5_volt_range_sel[] = {
 /*
 * BD71847 BUCK3
 */
-static const struct regulator_linear_range bd71847_buck3_volts[] = {
+static const struct linear_range bd71847_buck3_volts[] = {
 	/* Ranges when VOLT_SEL bits are 00 */
 	REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000),
 	REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000),
@ -202,7 +384,7 @@ static const unsigned int bd71847_buck3_volt_range_sel[] = {
 	0x0, 0x0, 0x0, 0x40, 0x80, 0x80, 0x80
 };

-static const struct regulator_linear_range bd71847_buck4_volts[] = {
+static const struct linear_range bd71847_buck4_volts[] = {
 	REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
 	REGULATOR_LINEAR_RANGE(2600000, 0x00, 0x03, 100000),
 };
@ -213,7 +395,7 @@ static const unsigned int bd71847_buck4_volt_range_sel[] = { 0x0, 0x40 };
 * BUCK6
 * 3.0V to 3.3V (step 100mV)
 */
-static const struct regulator_linear_range bd71837_buck6_volts[] = {
+static const struct linear_range bd71837_buck6_volts[] = {
 	REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
 };

@ -237,7 +419,7 @@ static const unsigned int bd718xx_3rd_nodvs_buck_volts[] = {
 * BUCK8
 * 0.8V to 1.40V (step 10mV)
 */
-static const struct regulator_linear_range bd718xx_4th_nodvs_buck_volts[] = {
+static const struct linear_range bd718xx_4th_nodvs_buck_volts[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0x00, 0x3C, 10000),
 };

@ -245,7 +427,7 @@ static const struct regulator_linear_range bd718xx_4th_nodvs_buck_volts[] = {
 * LDO1
 * 3.0 to 3.3V (100mV step)
 */
-static const struct regulator_linear_range bd718xx_ldo1_volts[] = {
+static const struct linear_range bd718xx_ldo1_volts[] = {
 	REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
 	REGULATOR_LINEAR_RANGE(1600000, 0x00, 0x03, 100000),
 };
@ -264,7 +446,7 @@ static const unsigned int ldo_2_volts[] = {
 * LDO3
 * 1.8 to 3.3V (100mV step)
 */
-static const struct regulator_linear_range bd718xx_ldo3_volts[] = {
+static const struct linear_range bd718xx_ldo3_volts[] = {
 	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
 };

@ -272,7 +454,7 @@ static const struct regulator_linear_range bd718xx_ldo3_volts[] = {
 * LDO4
 * 0.9 to 1.8V (100mV step)
 */
-static const struct regulator_linear_range bd718xx_ldo4_volts[] = {
+static const struct linear_range bd718xx_ldo4_volts[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000),
 };

@ -280,7 +462,7 @@ static const struct regulator_linear_range bd718xx_ldo4_volts[] = {
 * LDO5 for BD71837
 * 1.8 to 3.3V (100mV step)
 */
-static const struct regulator_linear_range bd71837_ldo5_volts[] = {
+static const struct linear_range bd71837_ldo5_volts[] = {
 	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
 };

@ -288,7 +470,7 @@ static const struct regulator_linear_range bd71837_ldo5_volts[] = {
 * LDO5 for BD71837
 * 1.8 to 3.3V (100mV step)
 */
-static const struct regulator_linear_range bd71847_ldo5_volts[] = {
+static const struct linear_range bd71847_ldo5_volts[] = {
 	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
 	REGULATOR_LINEAR_RANGE(800000, 0x00, 0x0F, 100000),
 };
@ -299,7 +481,7 @@ static const unsigned int bd71847_ldo5_volt_range_sel[] = { 0x0, 0x20 };
 * LDO6
 * 0.9 to 1.8V (100mV step)
 */
-static const struct regulator_linear_range bd718xx_ldo6_volts[] = {
+static const struct linear_range bd718xx_ldo6_volts[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000),
 };

@ -307,7 +489,7 @@ static const struct regulator_linear_range bd718xx_ldo6_volts[] = {
 * LDO7
 * 1.8 to 3.3V (100mV step)
 */
-static const struct regulator_linear_range bd71837_ldo7_volts[] = {
+static const struct linear_range bd71837_ldo7_volts[] = {
 	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
 };

@ -805,7 +987,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.of_match = of_match_ptr("BUCK5"),
 			.regulators_node = of_match_ptr("regulators"),
 			.id = BD718XX_BUCK5,
-			.ops = &bd718xx_pickable_range_buck_ops,
+			.ops = &bd71837_pickable_range_buck_ops,
 			.type = REGULATOR_VOLTAGE,
 			.n_voltages = BD71837_BUCK5_VOLTAGE_NUM,
 			.linear_ranges = bd71837_buck5_volts,
@ -832,7 +1014,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.of_match = of_match_ptr("BUCK6"),
 			.regulators_node = of_match_ptr("regulators"),
 			.id = BD718XX_BUCK6,
-			.ops = &bd718xx_buck_regulator_ops,
+			.ops = &bd71837_buck_regulator_ops,
 			.type = REGULATOR_VOLTAGE,
 			.n_voltages = BD71837_BUCK6_VOLTAGE_NUM,
 			.linear_ranges = bd71837_buck6_volts,
@ -856,7 +1038,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.of_match = of_match_ptr("BUCK7"),
 			.regulators_node = of_match_ptr("regulators"),
 			.id = BD718XX_BUCK7,
-			.ops = &bd718xx_buck_regulator_nolinear_ops,
+			.ops = &bd71837_buck_regulator_nolinear_ops,
 			.type = REGULATOR_VOLTAGE,
 			.volt_table = &bd718xx_3rd_nodvs_buck_volts[0],
 			.n_voltages = ARRAY_SIZE(bd718xx_3rd_nodvs_buck_volts),
@ -878,7 +1060,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.of_match = of_match_ptr("BUCK8"),
 			.regulators_node = of_match_ptr("regulators"),
 			.id = BD718XX_BUCK8,
-			.ops = &bd718xx_buck_regulator_ops,
+			.ops = &bd71837_buck_regulator_ops,
 			.type = REGULATOR_VOLTAGE,
 			.n_voltages = BD718XX_4TH_NODVS_BUCK_VOLTAGE_NUM,
 			.linear_ranges = bd718xx_4th_nodvs_buck_volts,
@ -902,7 +1084,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.of_match = of_match_ptr("LDO1"),
 			.regulators_node = of_match_ptr("regulators"),
 			.id = BD718XX_LDO1,
-			.ops = &bd718xx_pickable_range_ldo_ops,
+			.ops = &bd71837_pickable_range_ldo_ops,
 			.type = REGULATOR_VOLTAGE,
 			.n_voltages = BD718XX_LDO1_VOLTAGE_NUM,
 			.linear_ranges = bd718xx_ldo1_volts,
@ -928,7 +1110,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.of_match = of_match_ptr("LDO2"),
 			.regulators_node = of_match_ptr("regulators"),
 			.id = BD718XX_LDO2,
-			.ops = &bd718xx_ldo_regulator_nolinear_ops,
+			.ops = &bd71837_ldo_regulator_nolinear_ops,
 			.type = REGULATOR_VOLTAGE,
 			.volt_table = &ldo_2_volts[0],
 			.vsel_reg = BD718XX_REG_LDO2_VOLT,
@ -950,7 +1132,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.of_match = of_match_ptr("LDO3"),
 			.regulators_node = of_match_ptr("regulators"),
 			.id = BD718XX_LDO3,
-			.ops = &bd718xx_ldo_regulator_ops,
+			.ops = &bd71837_ldo_regulator_ops,
 			.type = REGULATOR_VOLTAGE,
 			.n_voltages = BD718XX_LDO3_VOLTAGE_NUM,
 			.linear_ranges = bd718xx_ldo3_volts,
@ -973,7 +1155,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.of_match = of_match_ptr("LDO4"),
 			.regulators_node = of_match_ptr("regulators"),
 			.id = BD718XX_LDO4,
-			.ops = &bd718xx_ldo_regulator_ops,
+			.ops = &bd71837_ldo_regulator_ops,
 			.type = REGULATOR_VOLTAGE,
 			.n_voltages = BD718XX_LDO4_VOLTAGE_NUM,
 			.linear_ranges = bd718xx_ldo4_volts,
@ -996,7 +1178,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.of_match = of_match_ptr("LDO5"),
 			.regulators_node = of_match_ptr("regulators"),
 			.id = BD718XX_LDO5,
-			.ops = &bd718xx_ldo_regulator_ops,
+			.ops = &bd71837_ldo_regulator_ops,
 			.type = REGULATOR_VOLTAGE,
 			.n_voltages = BD71837_LDO5_VOLTAGE_NUM,
 			.linear_ranges = bd71837_ldo5_volts,
@ -1023,7 +1205,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.of_match = of_match_ptr("LDO6"),
 			.regulators_node = of_match_ptr("regulators"),
 			.id = BD718XX_LDO6,
-			.ops = &bd718xx_ldo_regulator_ops,
+			.ops = &bd71837_ldo_regulator_ops,
 			.type = REGULATOR_VOLTAGE,
 			.n_voltages = BD718XX_LDO6_VOLTAGE_NUM,
 			.linear_ranges = bd718xx_ldo6_volts,
@ -1050,7 +1232,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.of_match = of_match_ptr("LDO7"),
 			.regulators_node = of_match_ptr("regulators"),
 			.id = BD718XX_LDO7,
-			.ops = &bd718xx_ldo_regulator_ops,
+			.ops = &bd71837_ldo_regulator_ops,
 			.type = REGULATOR_VOLTAGE,
 			.n_voltages = BD71837_LDO7_VOLTAGE_NUM,
 			.linear_ranges = bd71837_ldo7_volts,
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@ -3642,36 +3642,19 @@ finish:
 	return done;
 }

-static int regulator_balance_voltage(struct regulator_dev *rdev,
-				     suspend_state_t state)
+int regulator_do_balance_voltage(struct regulator_dev *rdev,
+				 suspend_state_t state, bool skip_coupled)
 {
 	struct regulator_dev **c_rdevs;
 	struct regulator_dev *best_rdev;
 	struct coupling_desc *c_desc = &rdev->coupling_desc;
-	struct regulator_coupler *coupler = c_desc->coupler;
 	int i, ret, n_coupled, best_min_uV, best_max_uV, best_c_rdev;
 	unsigned int delta, best_delta;
 	unsigned long c_rdev_done = 0;
 	bool best_c_rdev_done;

 	c_rdevs = c_desc->coupled_rdevs;
-	n_coupled = c_desc->n_coupled;
-
-	/*
-	 * If system is in a state other than PM_SUSPEND_ON, don't check
-	 * other coupled regulators.
-	 */
-	if (state != PM_SUSPEND_ON)
-		n_coupled = 1;
-
-	if (c_desc->n_resolved < n_coupled) {
-		rdev_err(rdev, "Not all coupled regulators registered\n");
-		return -EPERM;
-	}
-
-	/* Invoke custom balancer for customized couplers */
-	if (coupler && coupler->balance_voltage)
-		return coupler->balance_voltage(coupler, rdev, state);
+	n_coupled = skip_coupled ? 1 : c_desc->n_coupled;

 	/*
 	 * Find the best possible voltage change on each loop. Leave the loop
@ -3742,6 +3725,32 @@ out:
 	return ret;
 }

+static int regulator_balance_voltage(struct regulator_dev *rdev,
+				     suspend_state_t state)
+{
+	struct coupling_desc *c_desc = &rdev->coupling_desc;
+	struct regulator_coupler *coupler = c_desc->coupler;
+	bool skip_coupled = false;
+
+	/*
+	 * If system is in a state other than PM_SUSPEND_ON, don't check
+	 * other coupled regulators.
+	 */
+	if (state != PM_SUSPEND_ON)
+		skip_coupled = true;
+
+	if (c_desc->n_resolved < c_desc->n_coupled) {
+		rdev_err(rdev, "Not all coupled regulators registered\n");
+		return -EPERM;
+	}
+
+	/* Invoke custom balancer for customized couplers */
+	if (coupler && coupler->balance_voltage)
+		return coupler->balance_voltage(coupler, rdev, state);
+
+	return regulator_do_balance_voltage(rdev, state, skip_coupled);
+}
+
 /**
 * regulator_set_voltage - set regulator output voltage
 * @regulator: regulator source
@ -4312,6 +4321,7 @@ EXPORT_SYMBOL_GPL(regulator_set_load);
 int regulator_allow_bypass(struct regulator *regulator, bool enable)
 {
 	struct regulator_dev *rdev = regulator->rdev;
+	const char *name = rdev_get_name(rdev);
 	int ret = 0;

 	if (!rdev->desc->ops->set_bypass)
@ -4326,18 +4336,26 @@ int regulator_allow_bypass(struct regulator *regulator, bool enable)
 		rdev->bypass_count++;

 		if (rdev->bypass_count == rdev->open_count) {
+			trace_regulator_bypass_enable(name);
+
 			ret = rdev->desc->ops->set_bypass(rdev, enable);
 			if (ret != 0)
 				rdev->bypass_count--;
+			else
+				trace_regulator_bypass_enable_complete(name);
 		}

 	} else if (!enable && regulator->bypass) {
 		rdev->bypass_count--;

 		if (rdev->bypass_count != rdev->open_count) {
+			trace_regulator_bypass_disable(name);
+
 			ret = rdev->desc->ops->set_bypass(rdev, enable);
 			if (ret != 0)
 				rdev->bypass_count++;
+			else
+				trace_regulator_bypass_disable_complete(name);
 		}
 	}

@ -5496,6 +5514,7 @@ static void regulator_summary_show_subtree(struct seq_file *s,
 		seq_printf(s, "%*s%-*s ",
 			   (level + 1) * 3 + 1, "",
 			   30 - (level + 1) * 3,
+			   consumer->supply_name ? consumer->supply_name :
 			   consumer->dev ? dev_name(consumer->dev) : "deviceless");

 		switch (rdev->desc->type) {
--- a/drivers/regulator/da903x.c
+++ b/drivers/regulator/da903x.c
@ -248,7 +248,7 @@ static int da9034_set_dvc_voltage_sel(struct regulator_dev *rdev,
 	return ret;
 }

-static const struct regulator_linear_range da9034_ldo12_ranges[] = {
+static const struct linear_range da9034_ldo12_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 50000),
 	REGULATOR_LINEAR_RANGE(2700000, 8, 15, 50000),
 };
--- a/drivers/regulator/db8500-prcmu.c
+++ b/drivers/regulator/db8500-prcmu.c
@ -181,7 +181,7 @@ static int db8500_regulator_switch_disable(struct regulator_dev *rdev)
 		goto out;
 	}

-	info->is_enabled = 0;
+	info->is_enabled = false;
 out:
 	return ret;
 }
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@ -131,10 +131,11 @@ int regulator_get_voltage_sel_pickable_regmap(struct regulator_dev *rdev)
 	unsigned int r_val;
 	int range;
 	unsigned int val;
-	int ret, i;
-	unsigned int voltages_in_range = 0;
+	int ret;
+	unsigned int voltages = 0;
+	const struct linear_range *r = rdev->desc->linear_ranges;

-	if (!rdev->desc->linear_ranges)
+	if (!r)
 		return -EINVAL;

 	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
@ -152,11 +153,9 @@ int regulator_get_voltage_sel_pickable_regmap(struct regulator_dev *rdev)
 	if (range < 0)
 		return -EINVAL;

-	for (i = 0; i < range; i++)
-		voltages_in_range += (rdev->desc->linear_ranges[i].max_sel -
-				     rdev->desc->linear_ranges[i].min_sel) + 1;
+	voltages = linear_range_values_in_range_array(r, range);

-	return val + voltages_in_range;
+	return val + voltages;
 }
 EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_pickable_regmap);

@ -179,8 +178,11 @@ int regulator_set_voltage_sel_pickable_regmap(struct regulator_dev *rdev,
 	unsigned int voltages_in_range = 0;

 	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
-		voltages_in_range = (rdev->desc->linear_ranges[i].max_sel -
-				     rdev->desc->linear_ranges[i].min_sel) + 1;
+		const struct linear_range *r;
+
+		r = &rdev->desc->linear_ranges[i];
+		voltages_in_range = linear_range_values_in_range(r);
+
 		if (sel < voltages_in_range)
 			break;
 		sel -= voltages_in_range;
@ -405,8 +407,10 @@ EXPORT_SYMBOL_GPL(regulator_map_voltage_linear);
 int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
 				       int min_uV, int max_uV)
 {
-	const struct regulator_linear_range *range;
+	const struct linear_range *range;
 	int ret = -EINVAL;
+	unsigned int sel;
+	bool found;
 	int voltage, i;

 	if (!rdev->desc->n_linear_ranges) {
@ -415,35 +419,19 @@ int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
 	}

 	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
-		int linear_max_uV;
-
 		range = &rdev->desc->linear_ranges[i];
-		linear_max_uV = range->min_uV +
-			(range->max_sel - range->min_sel) * range->uV_step;

-		if (!(min_uV <= linear_max_uV && max_uV >= range->min_uV))
+		ret = linear_range_get_selector_high(range, min_uV, &sel,
+						     &found);
+		if (ret)
 			continue;
-
-		if (min_uV <= range->min_uV)
-			min_uV = range->min_uV;
-
-		/* range->uV_step == 0 means fixed voltage range */
-		if (range->uV_step == 0) {
-			ret = 0;
-		} else {
-			ret = DIV_ROUND_UP(min_uV - range->min_uV,
-					   range->uV_step);
-			if (ret < 0)
-				return ret;
-		}
-
-		ret += range->min_sel;
+		ret = sel;

 		/*
 		 * Map back into a voltage to verify we're still in bounds.
 		 * If we are not, then continue checking rest of the ranges.
 		 */
-		voltage = rdev->desc->ops->list_voltage(rdev, ret);
+		voltage = rdev->desc->ops->list_voltage(rdev, sel);
 		if (voltage >= min_uV && voltage <= max_uV)
 			break;
 	}
@ -468,7 +456,7 @@ EXPORT_SYMBOL_GPL(regulator_map_voltage_linear_range);
 int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev,
 						int min_uV, int max_uV)
 {
-	const struct regulator_linear_range *range;
+	const struct linear_range *range;
 	int ret = -EINVAL;
 	int voltage, i;
 	unsigned int selector = 0;
@ -480,30 +468,25 @@ int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev,

 	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
 		int linear_max_uV;
+		bool found;
+		unsigned int sel;

 		range = &rdev->desc->linear_ranges[i];
-		linear_max_uV = range->min_uV +
-			(range->max_sel - range->min_sel) * range->uV_step;
+		linear_max_uV = linear_range_get_max_value(range);

-		if (!(min_uV <= linear_max_uV && max_uV >= range->min_uV)) {
-			selector += (range->max_sel - range->min_sel + 1);
+		if (!(min_uV <= linear_max_uV && max_uV >= range->min)) {
+			selector += linear_range_values_in_range(range);
 			continue;
 		}

-		if (min_uV <= range->min_uV)
-			min_uV = range->min_uV;
-
-		/* range->uV_step == 0 means fixed voltage range */
-		if (range->uV_step == 0) {
-			ret = 0;
-		} else {
-			ret = DIV_ROUND_UP(min_uV - range->min_uV,
-					   range->uV_step);
-			if (ret < 0)
-				return ret;
+		ret = linear_range_get_selector_high(range, min_uV, &sel,
+						     &found);
+		if (ret) {
+			selector += linear_range_values_in_range(range);
+			continue;
 		}

-		ret += selector;
+		ret = selector + sel;

 		voltage = rdev->desc->ops->list_voltage(rdev, ret);

@ -513,7 +496,7 @@ int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev,
 		 * exit but retry until we have checked all ranges.
 		 */
 		if (voltage < min_uV || voltage > max_uV)
-			selector += (range->max_sel - range->min_sel + 1);
+			selector += linear_range_values_in_range(range);
 		else
 			break;
 	}
@ -561,7 +544,7 @@ EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);
 int regulator_list_voltage_pickable_linear_range(struct regulator_dev *rdev,
 						 unsigned int selector)
 {
-	const struct regulator_linear_range *range;
+	const struct linear_range *range;
 	int i;
 	unsigned int all_sels = 0;

@ -571,18 +554,28 @@ int regulator_list_voltage_pickable_linear_range(struct regulator_dev *rdev,
 	}

 	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
-		unsigned int sels_in_range;
+		unsigned int sel_indexes;

 		range = &rdev->desc->linear_ranges[i];

-		sels_in_range = range->max_sel - range->min_sel;
+		sel_indexes = linear_range_values_in_range(range) - 1;

-		if (all_sels + sels_in_range >= selector) {
+		if (all_sels + sel_indexes >= selector) {
 			selector -= all_sels;
-			return range->min_uV + (range->uV_step * selector);
+			/*
+			 * As we see here, pickable ranges work only as
+			 * long as the first selector for each pickable
+			 * range is 0, and the each subsequent range for
+			 * this 'pick' follow immediately at next unused
+			 * selector (Eg. there is no gaps between ranges).
+			 * I think this is fine but it probably should be
+			 * documented. OTOH, whole pickable range stuff
+			 * might benefit from some documentation
+			 */
+			return range->min + (range->step * selector);
 		}

-		all_sels += (sels_in_range + 1);
+		all_sels += (sel_indexes + 1);
 	}

 	return -EINVAL;
@ -604,27 +597,18 @@ EXPORT_SYMBOL_GPL(regulator_list_voltage_pickable_linear_range);
 int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc,
 					     unsigned int selector)
 {
-	const struct regulator_linear_range *range;
-	int i;
+	unsigned int val;
+	int ret;

-	if (!desc->n_linear_ranges) {
-		BUG_ON(!desc->n_linear_ranges);
-		return -EINVAL;
-	}
+	BUG_ON(!desc->n_linear_ranges);

-	for (i = 0; i < desc->n_linear_ranges; i++) {
-		range = &desc->linear_ranges[i];
+	ret = linear_range_get_value_array(desc->linear_ranges,
+					   desc->n_linear_ranges, selector,
+					   &val);
+	if (ret)
+		return ret;

-		if (!(selector >= range->min_sel &&
-		      selector <= range->max_sel))
-			continue;
-
-		selector -= range->min_sel;
-
-		return range->min_uV + (range->uV_step * selector);
-	}
-
-	return -EINVAL;
+	return val;
 }
 EXPORT_SYMBOL_GPL(regulator_desc_list_voltage_linear_range);

--- a/drivers/regulator/hi6421-regulator.c
+++ b/drivers/regulator/hi6421-regulator.c
@ -87,7 +87,7 @@ static const unsigned int ldo_8_voltages[] = {
 };

 /* Ranges are sorted in ascending order. */
-static const struct regulator_linear_range ldo_audio_volt_range[] = {
+static const struct linear_range ldo_audio_volt_range[] = {
 	REGULATOR_LINEAR_RANGE(2800000, 0, 3, 50000),
 	REGULATOR_LINEAR_RANGE(3000000, 4, 7, 100000),
 };
@ -195,7 +195,7 @@ static const struct regulator_ops hi6421_buck345_ops;
 * _id - LDO id name string
 * _match - of match name string
 * n_volt - number of votages available
- * volt_ranges - array of regulator_linear_range
+ * volt_ranges - array of linear_range
 * vstep - voltage increase in each linear step in uV
 * vreg - voltage select register
 * vmask - voltage select mask
--- a/drivers/regulator/lochnagar-regulator.c
+++ b/drivers/regulator/lochnagar-regulator.c
@ -36,7 +36,7 @@ static const struct regulator_ops lochnagar_micvdd_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 };

-static const struct regulator_linear_range lochnagar_micvdd_ranges[] = {
+static const struct linear_range lochnagar_micvdd_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0,    0xC, 50000),
 	REGULATOR_LINEAR_RANGE(1700000, 0xD, 0x1F, 100000),
 };
@ -97,7 +97,7 @@ static const struct regulator_ops lochnagar_vddcore_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 };

-static const struct regulator_linear_range lochnagar_vddcore_ranges[] = {
+static const struct linear_range lochnagar_vddcore_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0x8, 0x41, 12500),
 };

--- a/drivers/regulator/lp873x-regulator.c
+++ b/drivers/regulator/lp873x-regulator.c
@ -54,14 +54,14 @@ struct lp873x_regulator {

 static const struct lp873x_regulator regulators[];

-static const struct regulator_linear_range buck0_buck1_ranges[] = {
+static const struct linear_range buck0_buck1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x0, 0x13, 0),
 	REGULATOR_LINEAR_RANGE(700000, 0x14, 0x17, 10000),
 	REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000),
 	REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000),
 };

-static const struct regulator_linear_range ldo0_ldo1_ranges[] = {
+static const struct linear_range ldo0_ldo1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0x0, 0x19, 100000),
 };

--- a/drivers/regulator/lp87565-regulator.c
+++ b/drivers/regulator/lp87565-regulator.c
@ -46,7 +46,7 @@ struct lp87565_regulator {

 static const struct lp87565_regulator regulators[];

-static const struct regulator_linear_range buck0_1_2_3_ranges[] = {
+static const struct linear_range buck0_1_2_3_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0xA, 0x17, 10000),
 	REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000),
 	REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000),
--- a/drivers/regulator/lp8788-buck.c
+++ b/drivers/regulator/lp8788-buck.c
@ -92,7 +92,7 @@ struct lp8788_buck {
 };

 /* BUCK 1 ~ 4 voltage ranges */
-static const struct regulator_linear_range buck_volt_ranges[] = {
+static const struct linear_range buck_volt_ranges[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0, 0, 0),
 	REGULATOR_LINEAR_RANGE(800000, 1, 25, 50000),
 };
--- a/drivers/regulator/max77650-regulator.c
+++ b/drivers/regulator/max77650-regulator.c
@ -49,7 +49,7 @@ static const unsigned int max77651_sbb1_volt_range_sel[] = {
 	0x0, 0x1, 0x2, 0x3
 };

-static const struct regulator_linear_range max77651_sbb1_volt_ranges[] = {
+static const struct linear_range max77651_sbb1_volt_ranges[] = {
 	/* range index 0 */
 	REGULATOR_LINEAR_RANGE(2400000, 0x00, 0x0f, 50000),
 	/* range index 1 */
--- a/drivers/regulator/max77826-regulator.c
+++ b/drivers/regulator/max77826-regulator.c
@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// max77826-regulator.c  - regulator driver for Maxim MAX77826
+//
+// Author: Iskren Chernev <iskren.chernev@gmail.com>
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+enum max77826_registers {
+	MAX77826_REG_INT_SRC = 0x00,
+	MAX77826_REG_SYS_INT,
+	MAX77826_REG_INT1,
+	MAX77826_REG_INT2,
+	MAX77826_REG_BB_INT,
+	MAX77826_REG_INT_SRC_M,
+	MAX77826_REG_TOPSYS_INT_M,
+	MAX77826_REG_INT1_M,
+	MAX77826_REG_INT2_M,
+	MAX77826_REG_BB_INT_M,
+	MAX77826_REG_TOPSYS_STAT,
+	MAX77826_REG_STAT1,
+	MAX77826_REG_STAT2,
+	MAX77826_REG_BB_STAT,
+	/* 0x0E - 0x0F: Reserved */
+	MAX77826_REG_LDO_OPMD1 = 0x10,
+	MAX77826_REG_LDO_OPMD2,
+	MAX77826_REG_LDO_OPMD3,
+	MAX77826_REG_LDO_OPMD4,
+	MAX77826_REG_B_BB_OPMD,
+	/* 0x15 - 0x1F: Reserved */
+	MAX77826_REG_LDO1_CFG = 0x20,
+	MAX77826_REG_LDO2_CFG,
+	MAX77826_REG_LDO3_CFG,
+	MAX77826_REG_LDO4_CFG,
+	MAX77826_REG_LDO5_CFG,
+	MAX77826_REG_LDO6_CFG,
+	MAX77826_REG_LDO7_CFG,
+	MAX77826_REG_LDO8_CFG,
+	MAX77826_REG_LDO9_CFG,
+	MAX77826_REG_LDO10_CFG,
+	MAX77826_REG_LDO11_CFG,
+	MAX77826_REG_LDO12_CFG,
+	MAX77826_REG_LDO13_CFG,
+	MAX77826_REG_LDO14_CFG,
+	MAX77826_REG_LDO15_CFG,
+	/* 0x2F: Reserved */
+	MAX77826_REG_BUCK_CFG = 0x30,
+	MAX77826_REG_BUCK_VOUT,
+	MAX77826_REG_BB_CFG,
+	MAX77826_REG_BB_VOUT,
+	/* 0x34 - 0x3F: Reserved */
+	MAX77826_REG_BUCK_SS_FREQ = 0x40,
+	MAX77826_REG_UVLO_FALL,
+	/* 0x42 - 0xCE: Reserved */
+	MAX77826_REG_DEVICE_ID = 0xCF,
+};
+
+enum max77826_regulators {
+	MAX77826_LDO1 = 0,
+	MAX77826_LDO2,
+	MAX77826_LDO3,
+	MAX77826_LDO4,
+	MAX77826_LDO5,
+	MAX77826_LDO6,
+	MAX77826_LDO7,
+	MAX77826_LDO8,
+	MAX77826_LDO9,
+	MAX77826_LDO10,
+	MAX77826_LDO11,
+	MAX77826_LDO12,
+	MAX77826_LDO13,
+	MAX77826_LDO14,
+	MAX77826_LDO15,
+	MAX77826_BUCK,
+	MAX77826_BUCKBOOST,
+	MAX77826_MAX_REGULATORS,
+};
+
+#define MAX77826_MASK_LDO		0x7f
+#define MAX77826_MASK_BUCK		0xff
+#define MAX77826_MASK_BUCKBOOST		0x7f
+#define MAX77826_BUCK_RAMP_DELAY	12500
+
+/* values in mV */
+/* for LDO1-3 */
+#define MAX77826_NMOS_LDO_VOLT_MIN	600000
+#define MAX77826_NMOS_LDO_VOLT_MAX	2187500
+#define MAX77826_NMOS_LDO_VOLT_STEP	12500
+
+/* for LDO4-15 */
+#define MAX77826_PMOS_LDO_VOLT_MIN	800000
+#define MAX77826_PMOS_LDO_VOLT_MAX	3975000
+#define MAX77826_PMOS_LDO_VOLT_STEP	25000
+
+/* for BUCK */
+#define MAX77826_BUCK_VOLT_MIN		500000
+#define MAX77826_BUCK_VOLT_MAX		1800000
+#define MAX77826_BUCK_VOLT_STEP		6250
+
+/* for BUCKBOOST */
+#define MAX77826_BUCKBOOST_VOLT_MIN	2600000
+#define MAX77826_BUCKBOOST_VOLT_MAX	4187500
+#define MAX77826_BUCKBOOST_VOLT_STEP	12500
+#define MAX77826_VOLT_RANGE(_type)					\
+	((MAX77826_ ## _type ## _VOLT_MAX -				\
+	  MAX77826_ ## _type ## _VOLT_MIN) /				\
+	 MAX77826_ ## _type ## _VOLT_STEP + 1)
+
+#define MAX77826_LDO(_id, _type)					\
+	[MAX77826_LDO ## _id] = {					\
+		.id = MAX77826_LDO ## _id,				\
+		.name = "LDO"#_id,					\
+		.of_match = of_match_ptr("LDO"#_id),			\
+		.regulators_node = "regulators",			\
+		.ops = &max77826_most_ops,				\
+		.min_uV = MAX77826_ ## _type ## _LDO_VOLT_MIN,		\
+		.uV_step = MAX77826_ ## _type ## _LDO_VOLT_STEP,	\
+		.n_voltages = MAX77826_VOLT_RANGE(_type ## _LDO),	\
+		.enable_reg = MAX77826_REG_LDO_OPMD1 + (_id - 1) / 4,	\
+		.enable_mask = BIT(((_id - 1) % 4) * 2 + 1),		\
+		.vsel_reg = MAX77826_REG_LDO1_CFG + (_id - 1),		\
+		.vsel_mask = MAX77826_MASK_LDO,				\
+		.owner = THIS_MODULE,					\
+	}
+
+#define MAX77826_BUCK(_idx, _id, _ops)					\
+	[MAX77826_ ## _id] = {						\
+		.id = MAX77826_ ## _id,					\
+		.name = #_id,						\
+		.of_match = of_match_ptr(#_id),				\
+		.regulators_node = "regulators",			\
+		.ops = &_ops,						\
+		.min_uV =  MAX77826_ ## _id ## _VOLT_MIN,		\
+		.uV_step = MAX77826_ ## _id ## _VOLT_STEP,		\
+		.n_voltages = MAX77826_VOLT_RANGE(_id),			\
+		.enable_reg = MAX77826_REG_B_BB_OPMD,			\
+		.enable_mask = BIT(_idx * 2 + 1),			\
+		.vsel_reg = MAX77826_REG_BUCK_VOUT + _idx * 2,		\
+		.vsel_mask = MAX77826_MASK_ ## _id,			\
+		.owner = THIS_MODULE,					\
+	}
+
+
+
+struct max77826_regulator_info {
+	struct regmap *regmap;
+	struct regulator_desc *rdesc;
+};
+
+static const struct regmap_config max77826_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MAX77826_REG_DEVICE_ID,
+};
+
+static int max77826_set_voltage_time_sel(struct regulator_dev *,
+				unsigned int old_selector,
+				unsigned int new_selector);
+
+static const struct regulator_ops max77826_most_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_ops max77826_buck_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= max77826_set_voltage_time_sel,
+};
+
+static struct regulator_desc max77826_regulators_desc[] = {
+	MAX77826_LDO(1, NMOS),
+	MAX77826_LDO(2, NMOS),
+	MAX77826_LDO(3, NMOS),
+	MAX77826_LDO(4, PMOS),
+	MAX77826_LDO(5, PMOS),
+	MAX77826_LDO(6, PMOS),
+	MAX77826_LDO(7, PMOS),
+	MAX77826_LDO(8, PMOS),
+	MAX77826_LDO(9, PMOS),
+	MAX77826_LDO(10, PMOS),
+	MAX77826_LDO(11, PMOS),
+	MAX77826_LDO(12, PMOS),
+	MAX77826_LDO(13, PMOS),
+	MAX77826_LDO(14, PMOS),
+	MAX77826_LDO(15, PMOS),
+	MAX77826_BUCK(0, BUCK, max77826_buck_ops),
+	MAX77826_BUCK(1, BUCKBOOST, max77826_most_ops),
+};
+
+static int max77826_set_voltage_time_sel(struct regulator_dev *rdev,
+				unsigned int old_selector,
+				unsigned int new_selector)
+{
+	if (new_selector > old_selector) {
+		return DIV_ROUND_UP(MAX77826_BUCK_VOLT_STEP *
+				(new_selector - old_selector),
+				MAX77826_BUCK_RAMP_DELAY);
+	}
+
+	return 0;
+}
+
+static int max77826_read_device_id(struct regmap *regmap, struct device *dev)
+{
+	unsigned int device_id;
+	int res;
+
+	res = regmap_read(regmap, MAX77826_REG_DEVICE_ID, &device_id);
+	if (!res)
+		dev_dbg(dev, "DEVICE_ID: 0x%x\n", device_id);
+
+	return res;
+}
+
+static int max77826_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct max77826_regulator_info *info;
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	int i;
+
+	info = devm_kzalloc(dev, sizeof(struct max77826_regulator_info),
+				GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->rdesc = max77826_regulators_desc;
+	regmap = devm_regmap_init_i2c(client, &max77826_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "Failed to allocate regmap!\n");
+		return PTR_ERR(regmap);
+	}
+
+	info->regmap = regmap;
+	i2c_set_clientdata(client, info);
+
+	config.dev = dev;
+	config.regmap = regmap;
+	config.driver_data = info;
+
+	for (i = 0; i < MAX77826_MAX_REGULATORS; i++) {
+		rdev = devm_regulator_register(dev,
+					       &max77826_regulators_desc[i],
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(dev, "Failed to register regulator!\n");
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return max77826_read_device_id(regmap, dev);
+}
+
+static const struct of_device_id max77826_of_match[] = {
+	{ .compatible = "maxim,max77826" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, max77826_of_match);
+
+static const struct i2c_device_id max77826_id[] = {
+	{ "max77826-regulator" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, max77826_id);
+
+static struct i2c_driver max77826_regulator_driver = {
+	.driver = {
+		.name = "max77826",
+		.of_match_table = of_match_ptr(max77826_of_match),
+	},
+	.probe_new = max77826_i2c_probe,
+	.id_table = max77826_id,
+};
+module_i2c_driver(max77826_regulator_driver);
+
+MODULE_AUTHOR("Iskren Chernev <iskren.chernev@gmail.com>");
+MODULE_DESCRIPTION("MAX77826 PMIC regulator driver");
+MODULE_LICENSE("GPL");
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@ -33,6 +33,10 @@ struct max8998_data {
 	unsigned int		buck2_idx;
 };

+static const unsigned int charger_current_table[] = {
+	90000, 380000, 475000, 550000, 570000, 600000, 700000, 800000,
+};
+
 static int max8998_get_enable_register(struct regulator_dev *rdev,
 					int *reg, int *shift)
 {
@ -63,6 +67,10 @@ static int max8998_get_enable_register(struct regulator_dev *rdev,
 		*reg = MAX8998_REG_CHGR2;
 		*shift = 7 - (ldo - MAX8998_ESAFEOUT1);
 		break;
+	case MAX8998_CHARGER:
+		*reg = MAX8998_REG_CHGR2;
+		*shift = 0;
+		break;
 	default:
 		return -EINVAL;
 	}
@ -88,6 +96,11 @@ static int max8998_ldo_is_enabled(struct regulator_dev *rdev)
 	return val & (1 << shift);
 }

+static int max8998_ldo_is_enabled_inverted(struct regulator_dev *rdev)
+{
+	return (!max8998_ldo_is_enabled(rdev));
+}
+
 static int max8998_ldo_enable(struct regulator_dev *rdev)
 {
 	struct max8998_data *max8998 = rdev_get_drvdata(rdev);
@ -358,6 +371,74 @@ static int max8998_set_voltage_buck_time_sel(struct regulator_dev *rdev,
 	return 0;
 }

+static int max8998_set_current_limit(struct regulator_dev *rdev,
+				     int min_uA, int max_uA)
+{
+	struct max8998_data *max8998 = rdev_get_drvdata(rdev);
+	struct i2c_client *i2c = max8998->iodev->i2c;
+	unsigned int n_currents = rdev->desc->n_current_limits;
+	int i, sel = -1;
+
+	if (n_currents == 0)
+		return -EINVAL;
+
+	if (rdev->desc->curr_table) {
+		const unsigned int *curr_table = rdev->desc->curr_table;
+		bool ascend = curr_table[n_currents - 1] > curr_table[0];
+
+		/* search for closest to maximum */
+		if (ascend) {
+			for (i = n_currents - 1; i >= 0; i--) {
+				if (min_uA <= curr_table[i] &&
+				    curr_table[i] <= max_uA) {
+					sel = i;
+					break;
+				}
+			}
+		} else {
+			for (i = 0; i < n_currents; i++) {
+				if (min_uA <= curr_table[i] &&
+				    curr_table[i] <= max_uA) {
+					sel = i;
+					break;
+				}
+			}
+		}
+	}
+
+	if (sel < 0)
+		return -EINVAL;
+
+	sel <<= ffs(rdev->desc->csel_mask) - 1;
+
+	return max8998_update_reg(i2c, rdev->desc->csel_reg,
+				  sel, rdev->desc->csel_mask);
+}
+
+int max8998_get_current_limit(struct regulator_dev *rdev)
+{
+	struct max8998_data *max8998 = rdev_get_drvdata(rdev);
+	struct i2c_client *i2c = max8998->iodev->i2c;
+	u8 val;
+	int ret;
+
+	ret = max8998_read_reg(i2c, rdev->desc->csel_reg, &val);
+	if (ret != 0)
+		return ret;
+
+	val &= rdev->desc->csel_mask;
+	val >>= ffs(rdev->desc->csel_mask) - 1;
+
+	if (rdev->desc->curr_table) {
+		if (val >= rdev->desc->n_current_limits)
+			return -EINVAL;
+
+		return rdev->desc->curr_table[val];
+	}
+
+	return -EINVAL;
+}
+
 static const struct regulator_ops max8998_ldo_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
@ -379,6 +460,15 @@ static const struct regulator_ops max8998_buck_ops = {
 	.set_voltage_time_sel	= max8998_set_voltage_buck_time_sel,
 };

+static const struct regulator_ops max8998_charger_ops = {
+	.set_current_limit	= max8998_set_current_limit,
+	.get_current_limit	= max8998_get_current_limit,
+	.is_enabled		= max8998_ldo_is_enabled_inverted,
+	/* Swapped as register is inverted */
+	.enable			= max8998_ldo_disable,
+	.disable		= max8998_ldo_enable,
+};
+
 static const struct regulator_ops max8998_others_ops = {
 	.is_enabled		= max8998_ldo_is_enabled,
 	.enable			= max8998_ldo_enable,
@ -397,6 +487,19 @@ static const struct regulator_ops max8998_others_ops = {
 		.owner = THIS_MODULE, \
 	}

+#define MAX8998_CURRENT_REG(_name, _ops, _table, _reg, _mask) \
+	{ \
+		.name = #_name, \
+		.id = MAX8998_##_name, \
+		.ops = _ops, \
+		.curr_table = _table, \
+		.n_current_limits = ARRAY_SIZE(_table), \
+		.csel_reg = _reg, \
+		.csel_mask = _mask, \
+		.type = REGULATOR_CURRENT, \
+		.owner = THIS_MODULE, \
+	}
+
 #define MAX8998_OTHERS_REG(_name, _id) \
 	{ \
 		.name = #_name, \
@ -432,6 +535,8 @@ static const struct regulator_desc regulators[] = {
 	MAX8998_OTHERS_REG(ENVICHG, MAX8998_ENVICHG),
 	MAX8998_OTHERS_REG(ESAFEOUT1, MAX8998_ESAFEOUT1),
 	MAX8998_OTHERS_REG(ESAFEOUT2, MAX8998_ESAFEOUT2),
+	MAX8998_CURRENT_REG(CHARGER, &max8998_charger_ops,
+			    charger_current_table, MAX8998_REG_CHGR1, 0x7),
 };

 static int max8998_pmic_dt_parse_dvs_gpio(struct max8998_dev *iodev,
--- a/drivers/regulator/mcp16502.c
+++ b/drivers/regulator/mcp16502.c
@ -391,11 +391,11 @@ static const struct of_device_id mcp16502_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, mcp16502_ids);

-static const struct regulator_linear_range b1l12_ranges[] = {
+static const struct linear_range b1l12_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1200000, VDD_LOW_SEL, VDD_HIGH_SEL, 50000),
 };

-static const struct regulator_linear_range b234_ranges[] = {
+static const struct linear_range b234_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, VDD_LOW_SEL, VDD_HIGH_SEL, 25000),
 };

--- a/drivers/regulator/mp8859.c
+++ b/drivers/regulator/mp8859.c
@ -73,7 +73,7 @@ static int mp8859_get_voltage_sel(struct regulator_dev *rdev)
 	return val;
 }

-static const struct regulator_linear_range mp8859_dcdc_ranges[] = {
+static const struct linear_range mp8859_dcdc_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, VOL_MIN_IDX, VOL_MAX_IDX, 10000),
 };

--- a/drivers/regulator/mt6323-regulator.c
+++ b/drivers/regulator/mt6323-regulator.c
@ -102,15 +102,15 @@ struct mt6323_regulator_info {
 	.modeset_mask = _modeset_mask,					\
 }

-static const struct regulator_linear_range buck_volt_range1[] = {
+static const struct linear_range buck_volt_range1[] = {
 	REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250),
 };

-static const struct regulator_linear_range buck_volt_range2[] = {
+static const struct linear_range buck_volt_range2[] = {
 	REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500),
 };

-static const struct regulator_linear_range buck_volt_range3[] = {
+static const struct linear_range buck_volt_range3[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000),
 };

--- a/drivers/regulator/mt6358-regulator.c
+++ b/drivers/regulator/mt6358-regulator.c
@ -137,19 +137,19 @@ struct mt6358_regulator_info {
 	.qi = BIT(15),							\
 }

-static const struct regulator_linear_range buck_volt_range1[] = {
+static const struct linear_range buck_volt_range1[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 6250),
 };

-static const struct regulator_linear_range buck_volt_range2[] = {
+static const struct linear_range buck_volt_range2[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 12500),
 };

-static const struct regulator_linear_range buck_volt_range3[] = {
+static const struct linear_range buck_volt_range3[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000),
 };

-static const struct regulator_linear_range buck_volt_range4[] = {
+static const struct linear_range buck_volt_range4[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0, 0x7f, 12500),
 };

--- a/drivers/regulator/mt6380-regulator.c
+++ b/drivers/regulator/mt6380-regulator.c
@ -152,15 +152,15 @@ struct mt6380_regulator_info {
 	.modeset_mask = _modeset_mask,					\
 }

-static const struct regulator_linear_range buck_volt_range1[] = {
+static const struct linear_range buck_volt_range1[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 0xfe, 6250),
 };

-static const struct regulator_linear_range buck_volt_range2[] = {
+static const struct linear_range buck_volt_range2[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 0xfe, 6250),
 };

-static const struct regulator_linear_range buck_volt_range3[] = {
+static const struct linear_range buck_volt_range3[] = {
 	REGULATOR_LINEAR_RANGE(1200000, 0, 0x3c, 25000),
 };

--- a/drivers/regulator/mt6397-regulator.c
+++ b/drivers/regulator/mt6397-regulator.c
@ -102,15 +102,15 @@ struct mt6397_regulator_info {
 	.qi = BIT(15),							\
 }

-static const struct regulator_linear_range buck_volt_range1[] = {
+static const struct linear_range buck_volt_range1[] = {
 	REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250),
 };

-static const struct regulator_linear_range buck_volt_range2[] = {
+static const struct linear_range buck_volt_range2[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0, 0x7f, 6250),
 };

-static const struct regulator_linear_range buck_volt_range3[] = {
+static const struct linear_range buck_volt_range3[] = {
 	REGULATOR_LINEAR_RANGE(1500000, 0, 0x1f, 20000),
 };

--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@ -22,14 +22,14 @@
 #include <linux/of_platform.h>
 #include <linux/regulator/of_regulator.h>

-static const struct regulator_linear_range smps_low_ranges[] = {
+static const struct linear_range smps_low_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
 	REGULATOR_LINEAR_RANGE(500000, 0x1, 0x6, 0),
 	REGULATOR_LINEAR_RANGE(510000, 0x7, 0x79, 10000),
 	REGULATOR_LINEAR_RANGE(1650000, 0x7A, 0x7f, 0),
 };

-static const struct regulator_linear_range smps_high_ranges[] = {
+static const struct linear_range smps_high_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
 	REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x6, 0),
 	REGULATOR_LINEAR_RANGE(1020000, 0x7, 0x79, 20000),
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@ -86,7 +86,7 @@ enum rpmh_regulator_type {
 struct rpmh_vreg_hw_data {
 	enum rpmh_regulator_type		regulator_type;
 	const struct regulator_ops		*ops;
-	const struct regulator_linear_range	voltage_range;
+	const struct linear_range	voltage_range;
 	int					n_voltages;
 	int					hpm_min_load_uA;
 	const int				*pmic_mode_map;
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@ -148,41 +148,41 @@ static const struct rpm_reg_parts rpm8960_ncp_parts = {
 /*
 * Physically available PMIC regulator voltage ranges
 */
-static const struct regulator_linear_range pldo_ranges[] = {
+static const struct linear_range pldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE( 750000,   0,  59, 12500),
 	REGULATOR_LINEAR_RANGE(1500000,  60, 123, 25000),
 	REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000),
 };

-static const struct regulator_linear_range nldo_ranges[] = {
+static const struct linear_range nldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE( 750000,   0,  63, 12500),
 };

-static const struct regulator_linear_range nldo1200_ranges[] = {
+static const struct linear_range nldo1200_ranges[] = {
 	REGULATOR_LINEAR_RANGE( 375000,   0,  59,  6250),
 	REGULATOR_LINEAR_RANGE( 750000,  60, 123, 12500),
 };

-static const struct regulator_linear_range smps_ranges[] = {
+static const struct linear_range smps_ranges[] = {
 	REGULATOR_LINEAR_RANGE( 375000,   0,  29, 12500),
 	REGULATOR_LINEAR_RANGE( 750000,  30,  89, 12500),
 	REGULATOR_LINEAR_RANGE(1500000,  90, 153, 25000),
 };

-static const struct regulator_linear_range ftsmps_ranges[] = {
+static const struct linear_range ftsmps_ranges[] = {
 	REGULATOR_LINEAR_RANGE( 350000,   0,   6, 50000),
 	REGULATOR_LINEAR_RANGE( 700000,   7,  63, 12500),
 	REGULATOR_LINEAR_RANGE(1500000,  64, 100, 50000),
 };

-static const struct regulator_linear_range smb208_ranges[] = {
+static const struct linear_range smb208_ranges[] = {
 	REGULATOR_LINEAR_RANGE( 375000,   0,  29, 12500),
 	REGULATOR_LINEAR_RANGE( 750000,  30,  89, 12500),
 	REGULATOR_LINEAR_RANGE(1500000,  90, 153, 25000),
 	REGULATOR_LINEAR_RANGE(3100000, 154, 234, 25000),
 };

-static const struct regulator_linear_range ncp_ranges[] = {
+static const struct linear_range ncp_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1500000,   0,  31, 50000),
 };

@ -604,16 +604,6 @@ static const struct qcom_rpm_reg pm8921_smps = {
 	.supports_force_mode_bypass = false,
 };

-static const struct qcom_rpm_reg pm8921_ftsmps = {
-	.desc.linear_ranges = ftsmps_ranges,
-	.desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
-	.desc.n_voltages = 101,
-	.desc.ops = &uV_ops,
-	.parts = &rpm8960_smps_parts,
-	.supports_force_mode_auto = true,
-	.supports_force_mode_bypass = false,
-};
-
 static const struct qcom_rpm_reg pm8921_ncp = {
 	.desc.linear_ranges = ncp_ranges,
 	.desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@ -199,7 +199,7 @@ static const struct regulator_ops rpm_bob_ops = {
 };

 static const struct regulator_desc pma8084_hfsmps = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(375000,  0,  95, 12500),
 		REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000),
 	},
@ -209,7 +209,7 @@ static const struct regulator_desc pma8084_hfsmps = {
 };

 static const struct regulator_desc pma8084_ftsmps = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(350000,  0, 184, 5000),
 		REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000),
 	},
@ -219,7 +219,7 @@ static const struct regulator_desc pma8084_ftsmps = {
 };

 static const struct regulator_desc pma8084_pldo = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE( 750000,  0,  63, 12500),
 		REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000),
 		REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000),
@ -230,7 +230,7 @@ static const struct regulator_desc pma8084_pldo = {
 };

 static const struct regulator_desc pma8084_nldo = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500),
 	},
 	.n_linear_ranges = 1,
@ -243,7 +243,7 @@ static const struct regulator_desc pma8084_switch = {
 };

 static const struct regulator_desc pm8x41_hfsmps = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE( 375000,  0,  95, 12500),
 		REGULATOR_LINEAR_RANGE(1575000, 96, 158, 25000),
 	},
@ -253,7 +253,7 @@ static const struct regulator_desc pm8x41_hfsmps = {
 };

 static const struct regulator_desc pm8841_ftsmps = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(350000,  0, 184, 5000),
 		REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000),
 	},
@ -263,7 +263,7 @@ static const struct regulator_desc pm8841_ftsmps = {
 };

 static const struct regulator_desc pm8941_boost = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(4000000, 0, 30, 50000),
 	},
 	.n_linear_ranges = 1,
@ -272,7 +272,7 @@ static const struct regulator_desc pm8941_boost = {
 };

 static const struct regulator_desc pm8941_pldo = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE( 750000,  0,  63, 12500),
 		REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000),
 		REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000),
@ -283,7 +283,7 @@ static const struct regulator_desc pm8941_pldo = {
 };

 static const struct regulator_desc pm8941_nldo = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500),
 	},
 	.n_linear_ranges = 1,
@ -302,7 +302,7 @@ static const struct regulator_desc pm8941_switch = {
 };

 static const struct regulator_desc pm8916_pldo = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(750000, 0, 208, 12500),
 	},
 	.n_linear_ranges = 1,
@ -311,7 +311,7 @@ static const struct regulator_desc pm8916_pldo = {
 };

 static const struct regulator_desc pm8916_nldo = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(375000, 0, 93, 12500),
 	},
 	.n_linear_ranges = 1,
@ -320,7 +320,7 @@ static const struct regulator_desc pm8916_nldo = {
 };

 static const struct regulator_desc pm8916_buck_lvo_smps = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500),
 		REGULATOR_LINEAR_RANGE(750000, 96, 127, 25000),
 	},
@ -330,7 +330,7 @@ static const struct regulator_desc pm8916_buck_lvo_smps = {
 };

 static const struct regulator_desc pm8916_buck_hvo_smps = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(1550000, 0, 31, 25000),
 	},
 	.n_linear_ranges = 1,
@ -339,7 +339,7 @@ static const struct regulator_desc pm8916_buck_hvo_smps = {
 };

 static const struct regulator_desc pm8950_hfsmps = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500),
 		REGULATOR_LINEAR_RANGE(1550000, 96, 127, 25000),
 	},
@ -349,7 +349,7 @@ static const struct regulator_desc pm8950_hfsmps = {
 };

 static const struct regulator_desc pm8950_ftsmps2p5 = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(80000, 0, 255, 5000),
 		REGULATOR_LINEAR_RANGE(160000, 256, 460, 10000),
 	},
@ -359,7 +359,7 @@ static const struct regulator_desc pm8950_ftsmps2p5 = {
 };

 static const struct regulator_desc pm8950_ult_nldo = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(375000, 0, 202, 12500),
 	},
 	.n_linear_ranges = 1,
@ -368,7 +368,7 @@ static const struct regulator_desc pm8950_ult_nldo = {
 };

 static const struct regulator_desc pm8950_ult_pldo = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(1750000, 0, 127, 12500),
 	},
 	.n_linear_ranges = 1,
@ -377,7 +377,7 @@ static const struct regulator_desc pm8950_ult_pldo = {
 };

 static const struct regulator_desc pm8950_pldo_lv = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(1500000, 0, 16, 25000),
 	},
 	.n_linear_ranges = 1,
@ -386,7 +386,7 @@ static const struct regulator_desc pm8950_pldo_lv = {
 };

 static const struct regulator_desc pm8950_pldo = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(975000, 0, 164, 12500),
 	},
 	.n_linear_ranges = 1,
@ -396,7 +396,7 @@ static const struct regulator_desc pm8950_pldo = {


 static const struct regulator_desc pm8994_hfsmps = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE( 375000,  0,  95, 12500),
 		REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000),
 	},
@ -406,7 +406,7 @@ static const struct regulator_desc pm8994_hfsmps = {
 };

 static const struct regulator_desc pm8994_ftsmps = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(350000,  0, 199, 5000),
 		REGULATOR_LINEAR_RANGE(700000, 200, 349, 10000),
 	},
@ -416,7 +416,7 @@ static const struct regulator_desc pm8994_ftsmps = {
 };

 static const struct regulator_desc pm8994_nldo = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500),
 	},
 	.n_linear_ranges = 1,
@ -425,7 +425,7 @@ static const struct regulator_desc pm8994_nldo = {
 };

 static const struct regulator_desc pm8994_pldo = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE( 750000,  0,  63, 12500),
 		REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000),
 		REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000),
@ -446,7 +446,7 @@ static const struct regulator_desc pm8994_lnldo = {
 };

 static const struct regulator_desc pmi8994_ftsmps = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(350000,  0, 199, 5000),
 		REGULATOR_LINEAR_RANGE(700000, 200, 349, 10000),
 	},
@ -456,7 +456,7 @@ static const struct regulator_desc pmi8994_ftsmps = {
 };

 static const struct regulator_desc pmi8994_hfsmps = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(350000,  0,  80, 12500),
 		REGULATOR_LINEAR_RANGE(700000, 81, 141, 25000),
 	},
@ -466,7 +466,7 @@ static const struct regulator_desc pmi8994_hfsmps = {
 };

 static const struct regulator_desc pmi8994_bby = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(3000000, 0, 44, 50000),
 	},
 	.n_linear_ranges = 1,
@ -475,7 +475,7 @@ static const struct regulator_desc pmi8994_bby = {
 };

 static const struct regulator_desc pmi8994_boost = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(4000000, 0, 30, 50000),
 	},
 	.n_linear_ranges = 1,
@ -484,7 +484,7 @@ static const struct regulator_desc pmi8994_boost = {
 };

 static const struct regulator_desc pm8998_ftsmps = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(320000, 0, 258, 4000),
 	},
 	.n_linear_ranges = 1,
@ -493,7 +493,7 @@ static const struct regulator_desc pm8998_ftsmps = {
 };

 static const struct regulator_desc pm8998_hfsmps = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
 	},
 	.n_linear_ranges = 1,
@ -502,7 +502,7 @@ static const struct regulator_desc pm8998_hfsmps = {
 };

 static const struct regulator_desc pm8998_nldo = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000),
 	},
 	.n_linear_ranges = 1,
@ -511,7 +511,7 @@ static const struct regulator_desc pm8998_nldo = {
 };

 static const struct regulator_desc pm8998_pldo = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(1664000, 0, 255, 8000),
 	},
 	.n_linear_ranges = 1,
@ -520,7 +520,7 @@ static const struct regulator_desc pm8998_pldo = {
 };

 static const struct regulator_desc pm8998_pldo_lv = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(1256000, 0, 127, 8000),
 	},
 	.n_linear_ranges = 1,
@ -533,7 +533,7 @@ static const struct regulator_desc pm8998_switch = {
 };

 static const struct regulator_desc pmi8998_bob = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(1824000, 0, 83, 32000),
 	},
 	.n_linear_ranges = 1,
@ -542,7 +542,7 @@ static const struct regulator_desc pmi8998_bob = {
 };

 static const struct regulator_desc pms405_hfsmps3 = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
 	},
 	.n_linear_ranges = 1,
@ -551,7 +551,7 @@ static const struct regulator_desc pms405_hfsmps3 = {
 };

 static const struct regulator_desc pms405_nldo300 = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000),
 	},
 	.n_linear_ranges = 1,
@ -560,7 +560,7 @@ static const struct regulator_desc pms405_nldo300 = {
 };

 static const struct regulator_desc pms405_nldo1200 = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000),
 	},
 	.n_linear_ranges = 1,
@ -569,7 +569,7 @@ static const struct regulator_desc pms405_nldo1200 = {
 };

 static const struct regulator_desc pms405_pldo50 = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(1664000, 0, 128, 16000),
 	},
 	.n_linear_ranges = 1,
@ -578,7 +578,7 @@ static const struct regulator_desc pms405_pldo50 = {
 };

 static const struct regulator_desc pms405_pldo150 = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(1664000, 0, 128, 16000),
 	},
 	.n_linear_ranges = 1,
@ -587,7 +587,7 @@ static const struct regulator_desc pms405_pldo150 = {
 };

 static const struct regulator_desc pms405_pldo600 = {
-	.linear_ranges = (struct regulator_linear_range[]) {
+	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(1256000, 0, 98, 8000),
 	},
 	.n_linear_ranges = 1,
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@ -165,14 +165,14 @@ static const int rk808_buck_config_regs[] = {
 	RK808_BUCK4_CONFIG_REG,
 };

-static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
+static const struct linear_range rk808_ldo3_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
 	REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
 };

 #define RK809_BUCK5_SEL_CNT		(8)

-static const struct regulator_linear_range rk809_buck5_voltage_ranges[] = {
+static const struct linear_range rk809_buck5_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1500000, 0, 0, 0),
 	REGULATOR_LINEAR_RANGE(1800000, 1, 3, 200000),
 	REGULATOR_LINEAR_RANGE(2800000, 4, 5, 200000),
@ -201,14 +201,14 @@ static const struct regulator_linear_range rk809_buck5_voltage_ranges[] = {
 #define RK817_BUCK1_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK1_SEL1 + 1)
 #define RK817_BUCK3_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK3_SEL1 + 1)

-static const struct regulator_linear_range rk817_buck1_voltage_ranges[] = {
+static const struct linear_range rk817_buck1_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0,
 			       RK817_BUCK1_SEL0, RK817_BUCK1_STP0),
 	REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1,
 			       RK817_BUCK1_SEL_CNT, RK817_BUCK1_STP1),
 };

-static const struct regulator_linear_range rk817_buck3_voltage_ranges[] = {
+static const struct linear_range rk817_buck3_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0,
 			       RK817_BUCK1_SEL0, RK817_BUCK1_STP0),
 	REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1,
@ -665,7 +665,7 @@ static const struct regulator_ops rk808_switch_ops = {
 	.set_suspend_disable	= rk808_set_suspend_disable,
 };

-static const struct regulator_linear_range rk805_buck_1_2_voltage_ranges[] = {
+static const struct linear_range rk805_buck_1_2_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(712500, 0, 59, 12500),
 	REGULATOR_LINEAR_RANGE(1800000, 60, 62, 200000),
 	REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0),
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@ -749,37 +749,37 @@ static const struct regulator_ops s2mps15_reg_buck_ops = {
 }

 /* voltage range for s2mps15 LDO 3, 5, 15, 16, 18, 20, 23 and 27 */
-static const struct regulator_linear_range s2mps15_ldo_voltage_ranges1[] = {
+static const struct linear_range s2mps15_ldo_voltage_ranges1[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0xc, 0x38, 25000),
 };

 /* voltage range for s2mps15 LDO 2, 6, 14, 17, 19, 21, 24 and 25 */
-static const struct regulator_linear_range s2mps15_ldo_voltage_ranges2[] = {
+static const struct linear_range s2mps15_ldo_voltage_ranges2[] = {
 	REGULATOR_LINEAR_RANGE(1800000, 0x0, 0x3f, 25000),
 };

 /* voltage range for s2mps15 LDO 4, 11, 12, 13, 22 and 26 */
-static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = {
+static const struct linear_range s2mps15_ldo_voltage_ranges3[] = {
 	REGULATOR_LINEAR_RANGE(700000, 0x0, 0x34, 12500),
 };

 /* voltage range for s2mps15 LDO 7, 8, 9 and 10 */
-static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = {
+static const struct linear_range s2mps15_ldo_voltage_ranges4[] = {
 	REGULATOR_LINEAR_RANGE(700000, 0x10, 0x20, 25000),
 };

 /* voltage range for s2mps15 LDO 1 */
-static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = {
+static const struct linear_range s2mps15_ldo_voltage_ranges5[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0x0, 0x20, 12500),
 };

 /* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */
-static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = {
+static const struct linear_range s2mps15_buck_voltage_ranges1[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0x20, 0xc0, 6250),
 };

 /* voltage range for s2mps15 BUCK 8, 9 and 10 */
-static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = {
+static const struct linear_range s2mps15_buck_voltage_ranges2[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0x20, 0x78, 12500),
 };

--- a/drivers/regulator/sky81452-regulator.c
+++ b/drivers/regulator/sky81452-regulator.c
@ -32,7 +32,7 @@ static const struct regulator_ops sky81452_reg_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 };

-static const struct regulator_linear_range sky81452_reg_ranges[] = {
+static const struct linear_range sky81452_reg_ranges[] = {
 	REGULATOR_LINEAR_RANGE(4500000, 0, 14, 250000),
 	REGULATOR_LINEAR_RANGE(9000000, 15, 31, 1000000),
 };
--- a/drivers/regulator/stpmic1_regulator.c
+++ b/drivers/regulator/stpmic1_regulator.c
@ -57,13 +57,13 @@ enum {
 /* Ramp delay worst case is (2250uV/uS) */
 #define PMIC_RAMP_DELAY 2200

-static const struct regulator_linear_range buck1_ranges[] = {
+static const struct linear_range buck1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(725000, 0, 4, 0),
 	REGULATOR_LINEAR_RANGE(725000, 5, 36, 25000),
 	REGULATOR_LINEAR_RANGE(1500000, 37, 63, 0),
 };

-static const struct regulator_linear_range buck2_ranges[] = {
+static const struct linear_range buck2_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0, 17, 0),
 	REGULATOR_LINEAR_RANGE(1050000, 18, 19, 0),
 	REGULATOR_LINEAR_RANGE(1100000, 20, 21, 0),
@ -77,7 +77,7 @@ static const struct regulator_linear_range buck2_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1500000, 36, 63, 0),
 };

-static const struct regulator_linear_range buck3_ranges[] = {
+static const struct linear_range buck3_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0, 19, 0),
 	REGULATOR_LINEAR_RANGE(1100000, 20, 23, 0),
 	REGULATOR_LINEAR_RANGE(1200000, 24, 27, 0),
@ -87,7 +87,7 @@ static const struct regulator_linear_range buck3_ranges[] = {
 	REGULATOR_LINEAR_RANGE(3400000, 56, 63, 0),
 };

-static const struct regulator_linear_range buck4_ranges[] = {
+static const struct linear_range buck4_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 27, 25000),
 	REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0),
 	REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0),
@ -97,19 +97,19 @@ static const struct regulator_linear_range buck4_ranges[] = {
 	REGULATOR_LINEAR_RANGE(3900000, 61, 63, 0),
 };

-static const struct regulator_linear_range ldo1_ranges[] = {
+static const struct linear_range ldo1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
 	REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
 	REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0),
 };

-static const struct regulator_linear_range ldo2_ranges[] = {
+static const struct linear_range ldo2_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
 	REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
 	REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0),
 };

-static const struct regulator_linear_range ldo3_ranges[] = {
+static const struct linear_range ldo3_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
 	REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
 	REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0),
@ -117,13 +117,13 @@ static const struct regulator_linear_range ldo3_ranges[] = {
 	REGULATOR_LINEAR_RANGE(500000, 31, 31, 0),
 };

-static const struct regulator_linear_range ldo5_ranges[] = {
+static const struct linear_range ldo5_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
 	REGULATOR_LINEAR_RANGE(1700000, 8, 30, 100000),
 	REGULATOR_LINEAR_RANGE(3900000, 31, 31, 0),
 };

-static const struct regulator_linear_range ldo6_ranges[] = {
+static const struct linear_range ldo6_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0, 24, 100000),
 	REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0),
 };
--- a/drivers/regulator/tps65086-regulator.c
+++ b/drivers/regulator/tps65086-regulator.c
@ -71,23 +71,23 @@ struct tps65086_regulator {
 	unsigned int decay_mask;
 };

-static const struct regulator_linear_range tps65086_10mv_ranges[] = {
+static const struct linear_range tps65086_10mv_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
 	REGULATOR_LINEAR_RANGE(410000, 0x1, 0x7F, 10000),
 };

-static const struct regulator_linear_range tps65086_buck126_25mv_ranges[] = {
+static const struct linear_range tps65086_buck126_25mv_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
 	REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x18, 0),
 	REGULATOR_LINEAR_RANGE(1025000, 0x19, 0x7F, 25000),
 };

-static const struct regulator_linear_range tps65086_buck345_25mv_ranges[] = {
+static const struct linear_range tps65086_buck345_25mv_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
 	REGULATOR_LINEAR_RANGE(425000, 0x1, 0x7F, 25000),
 };

-static const struct regulator_linear_range tps65086_ldoa1_ranges[] = {
+static const struct linear_range tps65086_ldoa1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1350000, 0x0, 0x0, 0),
 	REGULATOR_LINEAR_RANGE(1500000, 0x1, 0x7, 100000),
 	REGULATOR_LINEAR_RANGE(2300000, 0x8, 0xB, 100000),
@ -95,7 +95,7 @@ static const struct regulator_linear_range tps65086_ldoa1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(3300000, 0xE, 0xE, 0),
 };

-static const struct regulator_linear_range tps65086_ldoa23_ranges[] = {
+static const struct linear_range tps65086_ldoa23_ranges[] = {
 	REGULATOR_LINEAR_RANGE(700000, 0x0, 0xD, 50000),
 	REGULATOR_LINEAR_RANGE(1400000, 0xE, 0xF, 100000),
 };
--- a/drivers/regulator/tps65217-regulator.c
+++ b/drivers/regulator/tps65217-regulator.c
@ -56,14 +56,14 @@ static const unsigned int LDO1_VSEL_table[] = {
 	2800000, 3000000, 3100000, 3300000,
 };

-static const struct regulator_linear_range tps65217_uv1_ranges[] = {
+static const struct linear_range tps65217_uv1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0, 24, 25000),
 	REGULATOR_LINEAR_RANGE(1550000, 25, 52, 50000),
 	REGULATOR_LINEAR_RANGE(3000000, 53, 55, 100000),
 	REGULATOR_LINEAR_RANGE(3300000, 56, 63, 0),
 };

-static const struct regulator_linear_range tps65217_uv2_ranges[] = {
+static const struct linear_range tps65217_uv2_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1500000, 0, 8, 50000),
 	REGULATOR_LINEAR_RANGE(2000000, 9, 13, 100000),
 	REGULATOR_LINEAR_RANGE(2450000, 14, 31, 50000),
--- a/drivers/regulator/tps65218-regulator.c
+++ b/drivers/regulator/tps65218-regulator.c
@ -56,17 +56,17 @@
 		.bypass_mask	= _sm,				\
 	}							\

-static const struct regulator_linear_range dcdc1_dcdc2_ranges[] = {
+static const struct linear_range dcdc1_dcdc2_ranges[] = {
 	REGULATOR_LINEAR_RANGE(850000, 0x0, 0x32, 10000),
 	REGULATOR_LINEAR_RANGE(1375000, 0x33, 0x3f, 25000),
 };

-static const struct regulator_linear_range ldo1_dcdc3_ranges[] = {
+static const struct linear_range ldo1_dcdc3_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0x0, 0x1a, 25000),
 	REGULATOR_LINEAR_RANGE(1600000, 0x1b, 0x3f, 50000),
 };

-static const struct regulator_linear_range dcdc4_ranges[] = {
+static const struct linear_range dcdc4_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1175000, 0x0, 0xf, 25000),
 	REGULATOR_LINEAR_RANGE(1600000, 0x10, 0x34, 50000),
 };
--- a/drivers/regulator/tps65912-regulator.c
+++ b/drivers/regulator/tps65912-regulator.c
@ -46,11 +46,11 @@ enum tps65912_regulators { DCDC1, DCDC2, DCDC3, DCDC4, LDO1, LDO2, LDO3,
 		.n_linear_ranges	= ARRAY_SIZE(_lr),		\
 	}

-static const struct regulator_linear_range tps65912_dcdc_ranges[] = {
+static const struct linear_range tps65912_dcdc_ranges[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0x0, 0x3f, 50000),
 };

-static const struct regulator_linear_range tps65912_ldo_ranges[] = {
+static const struct linear_range tps65912_ldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0x0, 0x20, 25000),
 	REGULATOR_LINEAR_RANGE(1650000, 0x21, 0x3c, 50000),
 	REGULATOR_LINEAR_RANGE(3100000, 0x3d, 0x3f, 100000),
--- a/drivers/regulator/tps80031-regulator.c
+++ b/drivers/regulator/tps80031-regulator.c
@ -271,7 +271,7 @@ static int tps80031_vbus_is_enabled(struct regulator_dev *rdev)
 {
 	struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
 	struct device *parent = to_tps80031_dev(rdev);
-	int ret = -EIO;
+	int ret;
 	uint8_t ctrl1 = 0;
 	uint8_t ctrl3 = 0;

@ -322,7 +322,7 @@ static int tps80031_vbus_disable(struct regulator_dev *rdev)
 {
 	struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
 	struct device *parent = to_tps80031_dev(rdev);
-	int ret = 0;
+	int ret;

 	if (ri->config_flags & TPS80031_VBUS_DISCHRG_EN_PDN) {
 		ret = tps80031_write(parent, TPS80031_SLAVE_ID2,
@ -530,7 +530,8 @@ static int tps80031_regulator_config(struct device *parent,
 	case TPS80031_REGULATOR_LDOUSB:
 		if (ri->config_flags & (TPS80031_USBLDO_INPUT_VSYS |
 			TPS80031_USBLDO_INPUT_PMID)) {
-			unsigned val = 0;
+			unsigned val;
+
 			if (ri->config_flags & TPS80031_USBLDO_INPUT_VSYS)
 				val = MISC2_LDOUSB_IN_VSYS;
 			else
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@ -360,12 +360,12 @@ static const u16 VINTANA2_VSEL_table[] = {
 };

 /* 600mV to 1450mV in 12.5 mV steps */
-static const struct regulator_linear_range VDD1_ranges[] = {
+static const struct linear_range VDD1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500)
 };

 /* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */
-static const struct regulator_linear_range VDD2_ranges[] = {
+static const struct linear_range VDD2_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500),
 	REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500)
 };
--- a/drivers/regulator/twl6030-regulator.c
+++ b/drivers/regulator/twl6030-regulator.c
@ -495,7 +495,7 @@ static const struct regulator_ops twlsmps_ops = {
 };

 /*----------------------------------------------------------------------*/
-static const struct regulator_linear_range twl6030ldo_linear_range[] = {
+static const struct linear_range twl6030ldo_linear_range[] = {
 	REGULATOR_LINEAR_RANGE(0, 0, 0, 0),
 	REGULATOR_LINEAR_RANGE(1000000, 1, 24, 100000),
 	REGULATOR_LINEAR_RANGE(2750000, 31, 31, 0),
--- a/drivers/regulator/wm831x-dcdc.c
+++ b/drivers/regulator/wm831x-dcdc.c
@ -204,7 +204,7 @@ static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data)
 * BUCKV specifics
 */

-static const struct regulator_linear_range wm831x_buckv_ranges[] = {
+static const struct linear_range wm831x_buckv_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 0x7, 0),
 	REGULATOR_LINEAR_RANGE(600000, 0x8, 0x68, 12500),
 };
--- a/drivers/regulator/wm831x-ldo.c
+++ b/drivers/regulator/wm831x-ldo.c
@ -59,7 +59,7 @@ static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data)
 * General purpose LDOs
 */

-static const struct regulator_linear_range wm831x_gp_ldo_ranges[] = {
+static const struct linear_range wm831x_gp_ldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0, 14, 50000),
 	REGULATOR_LINEAR_RANGE(1700000, 15, 31, 100000),
 };
@ -312,7 +312,7 @@ static struct platform_driver wm831x_gp_ldo_driver = {
 * Analogue LDOs
 */

-static const struct regulator_linear_range wm831x_aldo_ranges[] = {
+static const struct linear_range wm831x_aldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0, 12, 50000),
 	REGULATOR_LINEAR_RANGE(1700000, 13, 31, 100000),
 };
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@ -470,7 +470,7 @@ static int wm8350_dcdc_set_suspend_mode(struct regulator_dev *rdev,
 	return 0;
 }

-static const struct regulator_linear_range wm8350_ldo_ranges[] = {
+static const struct linear_range wm8350_ldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0, 15, 50000),
 	REGULATOR_LINEAR_RANGE(1800000, 16, 31, 100000),
 };
--- a/drivers/regulator/wm8400-regulator.c
+++ b/drivers/regulator/wm8400-regulator.c
@ -13,7 +13,7 @@
 #include <linux/regulator/driver.h>
 #include <linux/mfd/wm8400-private.h>

-static const struct regulator_linear_range wm8400_ldo_ranges[] = {
+static const struct linear_range wm8400_ldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0, 14, 50000),
 	REGULATOR_LINEAR_RANGE(1700000, 15, 31, 100000),
 };
--- a/include/linux/linear_range.h
+++ b/include/linux/linear_range.h
@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2020 ROHM Semiconductors */
+
+#ifndef LINEAR_RANGE_H
+#define LINEAR_RANGE_H
+
+#include <linux/types.h>
+
+/**
+ * struct linear_range - table of selector - value pairs
+ *
+ * Define a lookup-table for range of values. Intended to help when looking
+ * for a register value matching certaing physical measure (like voltage).
+ * Usable when increment of one in register always results a constant increment
+ * of the physical measure (like voltage).
+ *
+ * @min:  Lowest value in range
+ * @min_sel: Lowest selector for range
+ * @max_sel: Highest selector for range
+ * @step: Value step size
+ */
+struct linear_range {
+	unsigned int min;
+	unsigned int min_sel;
+	unsigned int max_sel;
+	unsigned int step;
+};
+
+unsigned int linear_range_values_in_range(const struct linear_range *r);
+unsigned int linear_range_values_in_range_array(const struct linear_range *r,
+						int ranges);
+unsigned int linear_range_get_max_value(const struct linear_range *r);
+
+int linear_range_get_value(const struct linear_range *r, unsigned int selector,
+			   unsigned int *val);
+int linear_range_get_value_array(const struct linear_range *r, int ranges,
+				 unsigned int selector, unsigned int *val);
+int linear_range_get_selector_low(const struct linear_range *r,
+				  unsigned int val, unsigned int *selector,
+				  bool *found);
+int linear_range_get_selector_high(const struct linear_range *r,
+				   unsigned int val, unsigned int *selector,
+				   bool *found);
+int linear_range_get_selector_low_array(const struct linear_range *r,
+					int ranges, unsigned int val,
+					unsigned int *selector, bool *found);
+
+#endif
--- a/include/linux/mfd/max8998.h
+++ b/include/linux/mfd/max8998.h
@ -39,6 +39,7 @@ enum {
 	MAX8998_ENVICHG,
 	MAX8998_ESAFEOUT1,
 	MAX8998_ESAFEOUT2,
+	MAX8998_CHARGER,
 };

 /**
--- a/include/linux/regulator/coupler.h
+++ b/include/linux/regulator/coupler.h
@ -62,6 +62,8 @@ int regulator_get_voltage_rdev(struct regulator_dev *rdev);
 int regulator_set_voltage_rdev(struct regulator_dev *rdev,
 			       int min_uV, int max_uV,
 			       suspend_state_t state);
+int regulator_do_balance_voltage(struct regulator_dev *rdev,
+				 suspend_state_t state, bool skip_coupled);
 #else
 static inline int regulator_coupler_register(struct regulator_coupler *coupler)
 {
@ -92,6 +94,12 @@ static inline int regulator_set_voltage_rdev(struct regulator_dev *rdev,
 {
 	return -EINVAL;
 }
+static inline int regulator_do_balance_voltage(struct regulator_dev *rdev,
+					       suspend_state_t state,
+					       bool skip_coupled)
+{
+	return -EINVAL;
+}
 #endif

 #endif
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@ -13,6 +13,7 @@
 #define __LINUX_REGULATOR_DRIVER_H_

 #include <linux/device.h>
+#include <linux/linear_range.h>
 #include <linux/notifier.h>
 #include <linux/regulator/consumer.h>
 #include <linux/ww_mutex.h>
@ -39,31 +40,13 @@ enum regulator_status {
 	REGULATOR_STATUS_UNDEFINED,
 };

-/**
- * struct regulator_linear_range - specify linear voltage ranges
- *
- * Specify a range of voltages for regulator_map_linear_range() and
- * regulator_list_linear_range().
- *
- * @min_uV:  Lowest voltage in range
- * @min_sel: Lowest selector for range
- * @max_sel: Highest selector for range
- * @uV_step: Step size
- */
-struct regulator_linear_range {
-	unsigned int min_uV;
-	unsigned int min_sel;
-	unsigned int max_sel;
-	unsigned int uV_step;
-};
-
-/* Initialize struct regulator_linear_range */
+/* Initialize struct linear_range for regulators */
 #define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV)	\
 {									\
-	.min_uV		= _min_uV,					\
+	.min		= _min_uV,					\
 	.min_sel	= _min_sel,					\
 	.max_sel	= _max_sel,					\
-	.uV_step	= _step_uV,					\
+	.step		= _step_uV,					\
 }

 /**
@ -348,7 +331,7 @@ struct regulator_desc {
 	unsigned int ramp_delay;
 	int min_dropout_uV;

-	const struct regulator_linear_range *linear_ranges;
+	const struct linear_range *linear_ranges;
 	const unsigned int *linear_range_selectors;

 	int n_linear_ranges;
--- a/include/trace/events/regulator.h
+++ b/include/trace/events/regulator.h
@ -70,6 +70,38 @@ DEFINE_EVENT(regulator_basic, regulator_disable_complete,

 );

+DEFINE_EVENT(regulator_basic, regulator_bypass_enable,
+
+	TP_PROTO(const char *name),
+
+	TP_ARGS(name)
+
+);
+
+DEFINE_EVENT(regulator_basic, regulator_bypass_enable_complete,
+
+	TP_PROTO(const char *name),
+
+	TP_ARGS(name)
+
+);
+
+DEFINE_EVENT(regulator_basic, regulator_bypass_disable,
+
+	TP_PROTO(const char *name),
+
+	TP_ARGS(name)
+
+);
+
+DEFINE_EVENT(regulator_basic, regulator_bypass_disable_complete,
+
+	TP_PROTO(const char *name),
+
+	TP_ARGS(name)
+
+);
+
 /*
 * Events that take a range of numerical values, mostly for voltages
 * and so on.
--- a/lib/Kconfig
+++ b/lib/Kconfig
@ -19,6 +19,9 @@ config RAID6_PQ_BENCHMARK
 	  Benchmark all available RAID6 PQ functions on init and choose the
 	  fastest one.

+config LINEAR_RANGES
+	tristate
+
 config PACKING
 	bool "Generic bitfield packing and unpacking"
 	default n
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@ -2092,6 +2092,18 @@ config LIST_KUNIT_TEST

 	  If unsure, say N.

+config LINEAR_RANGES_TEST
+	tristate "KUnit test for linear_ranges"
+	depends on KUNIT
+	select LINEAR_RANGES
+	help
+	  This builds the linear_ranges unit test, which runs on boot.
+	  Tests the linear_ranges logic correctness.
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
 config TEST_UDELAY
 	tristate "udelay test driver"
 	help
--- a/lib/Makefile
+++ b/lib/Makefile
@ -125,6 +125,7 @@ obj-$(CONFIG_DEBUG_LIST) += list_debug.o
 obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o

 obj-$(CONFIG_BITREVERSE) += bitrev.o
+obj-$(CONFIG_LINEAR_RANGES) += linear_ranges.o
 obj-$(CONFIG_PACKING)	+= packing.o
 obj-$(CONFIG_CRC_CCITT)	+= crc-ccitt.o
 obj-$(CONFIG_CRC16)	+= crc16.o
@ -309,3 +310,4 @@ obj-$(CONFIG_OBJAGG) += objagg.o

 # KUnit tests
 obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o
+obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o
--- a/lib/linear_ranges.c
+++ b/lib/linear_ranges.c
@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * helpers to map values in a linear range to range index
+ *
+ * Original idea borrowed from regulator framework
+ *
+ * It might be useful if we could support also inversely proportional ranges?
+ * Copyright 2020 ROHM Semiconductors
+ */
+
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/linear_range.h>
+#include <linux/module.h>
+
+/**
+ * linear_range_values_in_range - return the amount of values in a range
+ * @r:		pointer to linear range where values are counted
+ *
+ * Compute the amount of values in range pointed by @r. Note, values can
+ * be all equal - range with selectors 0,...,2 with step 0 still contains
+ * 3 values even though they are all equal.
+ *
+ * Return: the amount of values in range pointed by @r
+ */
+unsigned int linear_range_values_in_range(const struct linear_range *r)
+{
+	if (!r)
+		return 0;
+	return r->max_sel - r->min_sel + 1;
+}
+EXPORT_SYMBOL_GPL(linear_range_values_in_range);
+
+/**
+ * linear_range_values_in_range_array - return the amount of values in ranges
+ * @r:		pointer to array of linear ranges where values are counted
+ * @ranges:	amount of ranges we include in computation.
+ *
+ * Compute the amount of values in ranges pointed by @r. Note, values can
+ * be all equal - range with selectors 0,...,2 with step 0 still contains
+ * 3 values even though they are all equal.
+ *
+ * Return: the amount of values in first @ranges ranges pointed by @r
+ */
+unsigned int linear_range_values_in_range_array(const struct linear_range *r,
+						int ranges)
+{
+	int i, values_in_range = 0;
+
+	for (i = 0; i < ranges; i++) {
+		int values;
+
+		values = linear_range_values_in_range(&r[i]);
+		if (!values)
+			return values;
+
+		values_in_range += values;
+	}
+	return values_in_range;
+}
+EXPORT_SYMBOL_GPL(linear_range_values_in_range_array);
+
+/**
+ * linear_range_get_max_value - return the largest value in a range
+ * @r:		pointer to linear range where value is looked from
+ *
+ * Return: the largest value in the given range
+ */
+unsigned int linear_range_get_max_value(const struct linear_range *r)
+{
+	return r->min + (r->max_sel - r->min_sel) * r->step;
+}
+EXPORT_SYMBOL_GPL(linear_range_get_max_value);
+
+/**
+ * linear_range_get_value - fetch a value from given range
+ * @r:		pointer to linear range where value is looked from
+ * @selector:	selector for which the value is searched
+ * @val:	address where found value is updated
+ *
+ * Search given ranges for value which matches given selector.
+ *
+ * Return: 0 on success, -EINVAL given selector is not found from any of the
+ * ranges.
+ */
+int linear_range_get_value(const struct linear_range *r, unsigned int selector,
+			   unsigned int *val)
+{
+	if (r->min_sel > selector || r->max_sel < selector)
+		return -EINVAL;
+
+	*val = r->min + (selector - r->min_sel) * r->step;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(linear_range_get_value);
+
+/**
+ * linear_range_get_value_array - fetch a value from array of ranges
+ * @r:		pointer to array of linear ranges where value is looked from
+ * @ranges:	amount of ranges in an array
+ * @selector:	selector for which the value is searched
+ * @val:	address where found value is updated
+ *
+ * Search through an array of ranges for value which matches given selector.
+ *
+ * Return: 0 on success, -EINVAL given selector is not found from any of the
+ * ranges.
+ */
+int linear_range_get_value_array(const struct linear_range *r, int ranges,
+				 unsigned int selector, unsigned int *val)
+{
+	int i;
+
+	for (i = 0; i < ranges; i++)
+		if (r[i].min_sel <= selector && r[i].max_sel >= selector)
+			return linear_range_get_value(&r[i], selector, val);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(linear_range_get_value_array);
+
+/**
+ * linear_range_get_selector_low - return linear range selector for value
+ * @r:		pointer to linear range where selector is looked from
+ * @val:	value for which the selector is searched
+ * @selector:	address where found selector value is updated
+ * @found:	flag to indicate that given value was in the range
+ *
+ * Return selector which which range value is closest match for given
+ * input value. Value is matching if it is equal or smaller than given
+ * value. If given value is in the range, then @found is set true.
+ *
+ * Return: 0 on success, -EINVAL if range is invalid or does not contain
+ * value smaller or equal to given value
+ */
+int linear_range_get_selector_low(const struct linear_range *r,
+				  unsigned int val, unsigned int *selector,
+				  bool *found)
+{
+	*found = false;
+
+	if (r->min > val)
+		return -EINVAL;
+
+	if (linear_range_get_max_value(r) < val) {
+		*selector = r->max_sel;
+		return 0;
+	}
+
+	*found = true;
+
+	if (r->step == 0)
+		*selector = r->min_sel;
+	else
+		*selector = (val - r->min) / r->step + r->min_sel;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(linear_range_get_selector_low);
+
+/**
+ * linear_range_get_selector_low_array - return linear range selector for value
+ * @r:		pointer to array of linear ranges where selector is looked from
+ * @ranges:	amount of ranges to scan from array
+ * @val:	value for which the selector is searched
+ * @selector:	address where found selector value is updated
+ * @found:	flag to indicate that given value was in the range
+ *
+ * Scan array of ranges for selector which which range value matches given
+ * input value. Value is matching if it is equal or smaller than given
+ * value. If given value is found to be in a range scanning is stopped and
+ * @found is set true. If a range with values smaller than given value is found
+ * but the range max is being smaller than given value, then the ranges
+ * biggest selector is updated to @selector but scanning ranges is continued
+ * and @found is set to false.
+ *
+ * Return: 0 on success, -EINVAL if range array is invalid or does not contain
+ * range with a value smaller or equal to given value
+ */
+int linear_range_get_selector_low_array(const struct linear_range *r,
+					int ranges, unsigned int val,
+					unsigned int *selector, bool *found)
+{
+	int i;
+	int ret = -EINVAL;
+
+	for (i = 0; i < ranges; i++) {
+		int tmpret;
+
+		tmpret = linear_range_get_selector_low(&r[i], val, selector,
+						       found);
+		if (!tmpret)
+			ret = 0;
+
+		if (*found)
+			break;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(linear_range_get_selector_low_array);
+
+/**
+ * linear_range_get_selector_high - return linear range selector for value
+ * @r:		pointer to linear range where selector is looked from
+ * @val:	value for which the selector is searched
+ * @selector:	address where found selector value is updated
+ * @found:	flag to indicate that given value was in the range
+ *
+ * Return selector which which range value is closest match for given
+ * input value. Value is matching if it is equal or higher than given
+ * value. If given value is in the range, then @found is set true.
+ *
+ * Return: 0 on success, -EINVAL if range is invalid or does not contain
+ * value greater or equal to given value
+ */
+int linear_range_get_selector_high(const struct linear_range *r,
+				   unsigned int val, unsigned int *selector,
+				   bool *found)
+{
+	*found = false;
+
+	if (linear_range_get_max_value(r) < val)
+		return -EINVAL;
+
+	if (r->min > val) {
+		*selector = r->min_sel;
+		return 0;
+	}
+
+	*found = true;
+
+	if (r->step == 0)
+		*selector = r->max_sel;
+	else
+		*selector = DIV_ROUND_UP(val - r->min, r->step) + r->min_sel;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(linear_range_get_selector_high);
+
+MODULE_DESCRIPTION("linear-ranges helper");
+MODULE_LICENSE("GPL");
--- a/lib/test_linear_ranges.c
+++ b/lib/test_linear_ranges.c
@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * KUnit test for the linear_ranges helper.
+ *
+ * Copyright (C) 2020, ROHM Semiconductors.
+ * Author: Matti Vaittinen <matti.vaittien@fi.rohmeurope.com>
+ */
+#include <kunit/test.h>
+
+#include <linux/linear_range.h>
+
+/* First things first. I deeply dislike unit-tests. I have seen all the hell
+ * breaking loose when people who think the unit tests are "the silver bullet"
+ * to kill bugs get to decide how a company should implement testing strategy...
+ *
+ * Believe me, it may get _really_ ridiculous. It is tempting to think that
+ * walking through all the possible execution branches will nail down 100% of
+ * bugs. This may lead to ideas about demands to get certain % of "test
+ * coverage" - measured as line coverage. And that is one of the worst things
+ * you can do.
+ *
+ * Ask people to provide line coverage and they do. I've seen clever tools
+ * which generate test cases to test the existing functions - and by default
+ * these tools expect code to be correct and just generate checks which are
+ * passing when ran against current code-base. Run this generator and you'll get
+ * tests that do not test code is correct but just verify nothing changes.
+ * Problem is that testing working code is pointless. And if it is not
+ * working, your test must not assume it is working. You won't catch any bugs
+ * by such tests. What you can do is to generate a huge amount of tests.
+ * Especially if you were are asked to proivde 100% line-coverage x_x. So what
+ * does these tests - which are not finding any bugs now - do?
+ *
+ * They add inertia to every future development. I think it was Terry Pratchet
+ * who wrote someone having same impact as thick syrup has to chronometre.
+ * Excessive amount of unit-tests have this effect to development. If you do
+ * actually find _any_ bug from code in such environment and try fixing it...
+ * ...chances are you also need to fix the test cases. In sunny day you fix one
+ * test. But I've done refactoring which resulted 500+ broken tests (which had
+ * really zero value other than proving to managers that we do do "quality")...
+ *
+ * After this being said - there are situations where UTs can be handy. If you
+ * have algorithms which take some input and should produce output - then you
+ * can implement few, carefully selected simple UT-cases which test this. I've
+ * previously used this for example for netlink and device-tree data parsing
+ * functions. Feed some data examples to functions and verify the output is as
+ * expected. I am not covering all the cases but I will see the logic should be
+ * working.
+ *
+ * Here we also do some minor testing. I don't want to go through all branches
+ * or test more or less obvious things - but I want to see the main logic is
+ * working. And I definitely don't want to add 500+ test cases that break when
+ * some simple fix is done x_x. So - let's only add few, well selected tests
+ * which ensure as much logic is good as possible.
+ */
+
+/*
+ * Test Range 1:
+ * selectors:	2	3	4	5	6
+ * values (5):	10	20	30	40	50
+ *
+ * Test Range 2:
+ * selectors:	7	8	9	10
+ * values (4):	100	150	200	250
+ */
+
+#define RANGE1_MIN 10
+#define RANGE1_MIN_SEL 2
+#define RANGE1_STEP 10
+
+/* 2, 3, 4, 5, 6 */
+static const unsigned int range1_sels[] = { RANGE1_MIN_SEL, RANGE1_MIN_SEL + 1,
+					    RANGE1_MIN_SEL + 2,
+					    RANGE1_MIN_SEL + 3,
+					    RANGE1_MIN_SEL + 4 };
+/* 10, 20, 30, 40, 50 */
+static const unsigned int range1_vals[] = { RANGE1_MIN, RANGE1_MIN +
+					    RANGE1_STEP,
+					    RANGE1_MIN + RANGE1_STEP * 2,
+					    RANGE1_MIN + RANGE1_STEP * 3,
+					    RANGE1_MIN + RANGE1_STEP * 4 };
+
+#define RANGE2_MIN 100
+#define RANGE2_MIN_SEL 7
+#define RANGE2_STEP 50
+
+/*  7, 8, 9, 10 */
+static const unsigned int range2_sels[] = { RANGE2_MIN_SEL, RANGE2_MIN_SEL + 1,
+					    RANGE2_MIN_SEL + 2,
+					    RANGE2_MIN_SEL + 3 };
+/* 100, 150, 200, 250 */
+static const unsigned int range2_vals[] = { RANGE2_MIN, RANGE2_MIN +
+					    RANGE2_STEP,
+					    RANGE2_MIN + RANGE2_STEP * 2,
+					    RANGE2_MIN + RANGE2_STEP * 3 };
+
+#define RANGE1_NUM_VALS (ARRAY_SIZE(range1_vals))
+#define RANGE2_NUM_VALS (ARRAY_SIZE(range2_vals))
+#define RANGE_NUM_VALS (RANGE1_NUM_VALS + RANGE2_NUM_VALS)
+
+#define RANGE1_MAX_SEL (RANGE1_MIN_SEL + RANGE1_NUM_VALS - 1)
+#define RANGE1_MAX_VAL (range1_vals[RANGE1_NUM_VALS - 1])
+
+#define RANGE2_MAX_SEL (RANGE2_MIN_SEL + RANGE2_NUM_VALS - 1)
+#define RANGE2_MAX_VAL (range2_vals[RANGE2_NUM_VALS - 1])
+
+#define SMALLEST_SEL RANGE1_MIN_SEL
+#define SMALLEST_VAL RANGE1_MIN
+
+static struct linear_range testr[] = {
+	{
+		.min = RANGE1_MIN,
+		.min_sel = RANGE1_MIN_SEL,
+		.max_sel = RANGE1_MAX_SEL,
+		.step = RANGE1_STEP,
+	}, {
+		.min = RANGE2_MIN,
+		.min_sel = RANGE2_MIN_SEL,
+		.max_sel = RANGE2_MAX_SEL,
+		.step = RANGE2_STEP
+	},
+};
+
+static void range_test_get_value(struct kunit *test)
+{
+	int ret, i;
+	unsigned int sel, val;
+
+	for (i = 0; i < RANGE1_NUM_VALS; i++) {
+		sel = range1_sels[i];
+		ret = linear_range_get_value_array(&testr[0], 2, sel, &val);
+		KUNIT_EXPECT_EQ(test, 0, ret);
+		KUNIT_EXPECT_EQ(test, val, range1_vals[i]);
+	}
+	for (i = 0; i < RANGE2_NUM_VALS; i++) {
+		sel = range2_sels[i];
+		ret = linear_range_get_value_array(&testr[0], 2, sel, &val);
+		KUNIT_EXPECT_EQ(test, 0, ret);
+		KUNIT_EXPECT_EQ(test, val, range2_vals[i]);
+	}
+	ret = linear_range_get_value_array(&testr[0], 2, sel + 1, &val);
+	KUNIT_EXPECT_NE(test, 0, ret);
+}
+
+static void range_test_get_selector_high(struct kunit *test)
+{
+	int ret, i;
+	unsigned int sel;
+	bool found;
+
+	for (i = 0; i < RANGE1_NUM_VALS; i++) {
+		ret = linear_range_get_selector_high(&testr[0], range1_vals[i],
+						     &sel, &found);
+		KUNIT_EXPECT_EQ(test, 0, ret);
+		KUNIT_EXPECT_EQ(test, sel, range1_sels[i]);
+		KUNIT_EXPECT_TRUE(test, found);
+	}
+
+	ret = linear_range_get_selector_high(&testr[0], RANGE1_MAX_VAL + 1,
+					     &sel, &found);
+	KUNIT_EXPECT_LE(test, ret, 0);
+
+	ret = linear_range_get_selector_high(&testr[0], RANGE1_MIN - 1,
+					     &sel, &found);
+	KUNIT_EXPECT_EQ(test, 0, ret);
+	KUNIT_EXPECT_FALSE(test, found);
+	KUNIT_EXPECT_EQ(test, sel, range1_sels[0]);
+}
+
+static void range_test_get_value_amount(struct kunit *test)
+{
+	int ret;
+
+	ret = linear_range_values_in_range_array(&testr[0], 2);
+	KUNIT_EXPECT_EQ(test, (int)RANGE_NUM_VALS, ret);
+}
+
+static void range_test_get_selector_low(struct kunit *test)
+{
+	int i, ret;
+	unsigned int sel;
+	bool found;
+
+	for (i = 0; i < RANGE1_NUM_VALS; i++) {
+		ret = linear_range_get_selector_low_array(&testr[0], 2,
+							  range1_vals[i], &sel,
+							  &found);
+		KUNIT_EXPECT_EQ(test, 0, ret);
+		KUNIT_EXPECT_EQ(test, sel, range1_sels[i]);
+		KUNIT_EXPECT_TRUE(test, found);
+	}
+	for (i = 0; i < RANGE2_NUM_VALS; i++) {
+		ret = linear_range_get_selector_low_array(&testr[0], 2,
+							  range2_vals[i], &sel,
+							  &found);
+		KUNIT_EXPECT_EQ(test, 0, ret);
+		KUNIT_EXPECT_EQ(test, sel, range2_sels[i]);
+		KUNIT_EXPECT_TRUE(test, found);
+	}
+
+	/*
+	 * Seek value greater than range max => get_selector_*_low should
+	 * return Ok - but set found to false as value is not in range
+	 */
+	ret = linear_range_get_selector_low_array(&testr[0], 2,
+					range2_vals[RANGE2_NUM_VALS - 1] + 1,
+					&sel, &found);
+
+	KUNIT_EXPECT_EQ(test, 0, ret);
+	KUNIT_EXPECT_EQ(test, sel, range2_sels[RANGE2_NUM_VALS - 1]);
+	KUNIT_EXPECT_FALSE(test, found);
+}
+
+static struct kunit_case range_test_cases[] = {
+	KUNIT_CASE(range_test_get_value_amount),
+	KUNIT_CASE(range_test_get_selector_high),
+	KUNIT_CASE(range_test_get_selector_low),
+	KUNIT_CASE(range_test_get_value),
+	{},
+};
+
+static struct kunit_suite range_test_module = {
+	.name = "linear-ranges-test",
+	.test_cases = range_test_cases,
+};
+
+kunit_test_suites(&range_test_module);
+
+MODULE_LICENSE("GPL");