net: davinci_emac: switch to new mdio

This patch switches the emac implementation over to the newly separated
MDIO driver.

With this, the mdio bus frequency defaults to a safe 2.2MHz.  Boards may
optionally specify a bus frequency via platform data.

The phy identification scheme has been modified to use a phy bus id instead
of a mask.  This largely serves to eliminate the "phy search" code in emac
init.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Michael Williamson <michael.williamson@criticallink.com>
Tested-by: Caglar Akyuz <caglarakyuz@gmail.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This commit is contained in:
Cyril Chemparathy 2010-09-15 10:11:24 -04:00 committed by Kevin Hilman
parent 433cdb0ac4
commit 5d69e0076a
3 changed files with 40 additions and 58 deletions

View File

@ -951,6 +951,7 @@ config NET_NETX
config TI_DAVINCI_EMAC
tristate "TI DaVinci EMAC Support"
depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
select TI_DAVINCI_MDIO
select PHYLIB
help
This driver supports TI's DaVinci Ethernet .

View File

@ -500,6 +500,7 @@ struct emac_priv {
u32 phy_mask;
/* mii_bus,phy members */
struct mii_bus *mii_bus;
const char *phy_id;
struct phy_device *phydev;
spinlock_t lock;
/*platform specific members*/
@ -686,7 +687,7 @@ static int emac_get_settings(struct net_device *ndev,
struct ethtool_cmd *ecmd)
{
struct emac_priv *priv = netdev_priv(ndev);
if (priv->phy_mask)
if (priv->phydev)
return phy_ethtool_gset(priv->phydev, ecmd);
else
return -EOPNOTSUPP;
@ -704,7 +705,7 @@ static int emac_get_settings(struct net_device *ndev,
static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *ecmd)
{
struct emac_priv *priv = netdev_priv(ndev);
if (priv->phy_mask)
if (priv->phydev)
return phy_ethtool_sset(priv->phydev, ecmd);
else
return -EOPNOTSUPP;
@ -841,7 +842,7 @@ static void emac_update_phystatus(struct emac_priv *priv)
mac_control = emac_read(EMAC_MACCONTROL);
cur_duplex = (mac_control & EMAC_MACCONTROL_FULLDUPLEXEN) ?
DUPLEX_FULL : DUPLEX_HALF;
if (priv->phy_mask)
if (priv->phydev)
new_duplex = priv->phydev->duplex;
else
new_duplex = DUPLEX_FULL;
@ -2485,6 +2486,11 @@ static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd)
return -EOPNOTSUPP;
}
static int match_first_device(struct device *dev, void *data)
{
return 1;
}
/**
* emac_dev_open: EMAC device open
* @ndev: The DaVinci EMAC network adapter
@ -2499,7 +2505,6 @@ static int emac_dev_open(struct net_device *ndev)
{
struct device *emac_dev = &ndev->dev;
u32 rc, cnt, ch;
int phy_addr;
struct resource *res;
int q, m;
int i = 0;
@ -2560,28 +2565,26 @@ static int emac_dev_open(struct net_device *ndev)
emac_set_coalesce(ndev, &coal);
}
/* find the first phy */
priv->phydev = NULL;
if (priv->phy_mask) {
emac_mii_reset(priv->mii_bus);
for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
if (priv->mii_bus->phy_map[phy_addr]) {
priv->phydev = priv->mii_bus->phy_map[phy_addr];
break;
}
}
/* use the first phy on the bus if pdata did not give us a phy id */
if (!priv->phy_id) {
struct device *phy;
if (!priv->phydev) {
printk(KERN_ERR "%s: no PHY found\n", ndev->name);
return -1;
}
phy = bus_find_device(&mdio_bus_type, NULL, NULL,
match_first_device);
if (phy)
priv->phy_id = dev_name(phy);
}
priv->phydev = phy_connect(ndev, dev_name(&priv->phydev->dev),
&emac_adjust_link, 0, PHY_INTERFACE_MODE_MII);
if (priv->phy_id && *priv->phy_id) {
priv->phydev = phy_connect(ndev, priv->phy_id,
&emac_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
if (IS_ERR(priv->phydev)) {
printk(KERN_ERR "%s: Could not attach to PHY\n",
ndev->name);
dev_err(emac_dev, "could not connect to phy %s\n",
priv->phy_id);
priv->phydev = NULL;
return PTR_ERR(priv->phydev);
}
@ -2589,12 +2592,13 @@ static int emac_dev_open(struct net_device *ndev)
priv->speed = 0;
priv->duplex = ~0;
printk(KERN_INFO "%s: attached PHY driver [%s] "
"(mii_bus:phy_addr=%s, id=%x)\n", ndev->name,
dev_info(emac_dev, "attached PHY driver [%s] "
"(mii_bus:phy_addr=%s, id=%x)\n",
priv->phydev->drv->name, dev_name(&priv->phydev->dev),
priv->phydev->phy_id);
} else{
} else {
/* No PHY , fix the link, speed and duplex settings */
dev_notice(emac_dev, "no phy, defaulting to 100/full\n");
priv->link = 1;
priv->speed = SPEED_100;
priv->duplex = DUPLEX_FULL;
@ -2607,7 +2611,7 @@ static int emac_dev_open(struct net_device *ndev)
if (netif_msg_drv(priv))
dev_notice(emac_dev, "DaVinci EMAC: Opened %s\n", ndev->name);
if (priv->phy_mask)
if (priv->phydev)
phy_start(priv->phydev);
return 0;
@ -2794,7 +2798,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev)
/* MAC addr and PHY mask , RMII enable info from platform_data */
memcpy(priv->mac_addr, pdata->mac_addr, 6);
priv->phy_mask = pdata->phy_mask;
priv->phy_id = pdata->phy_id;
priv->rmii_en = pdata->rmii_en;
priv->version = pdata->version;
priv->int_enable = pdata->interrupt_enable;
@ -2871,32 +2875,6 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev)
}
/* MII/Phy intialisation, mdio bus registration */
emac_mii = mdiobus_alloc();
if (emac_mii == NULL) {
dev_err(emac_dev, "DaVinci EMAC: Error allocating mii_bus\n");
rc = -ENOMEM;
goto mdio_alloc_err;
}
priv->mii_bus = emac_mii;
emac_mii->name = "emac-mii",
emac_mii->read = emac_mii_read,
emac_mii->write = emac_mii_write,
emac_mii->reset = emac_mii_reset,
emac_mii->irq = mii_irqs,
emac_mii->phy_mask = ~(priv->phy_mask);
emac_mii->parent = &pdev->dev;
emac_mii->priv = priv->remap_addr + pdata->mdio_reg_offset;
snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", priv->pdev->id);
mdio_max_freq = pdata->mdio_max_freq;
emac_mii->reset(emac_mii);
/* Register the MII bus */
rc = mdiobus_register(emac_mii);
if (rc)
goto mdiobus_quit;
if (netif_msg_probe(priv)) {
dev_notice(emac_dev, "DaVinci EMAC Probe found device "\
"(regs: %p, irq: %d)\n",
@ -2904,11 +2882,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev)
}
return 0;
mdiobus_quit:
mdiobus_free(emac_mii);
netdev_reg_err:
mdio_alloc_err:
clk_disable(emac_clk);
no_irq_res:
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@ -2938,8 +2912,6 @@ static int __devexit davinci_emac_remove(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mdiobus_unregister(priv->mii_bus);
mdiobus_free(priv->mii_bus);
release_mem_region(res->start, res->end - res->start + 1);

View File

@ -28,6 +28,15 @@ struct emac_platform_data {
u32 ctrl_ram_size;
u32 phy_mask;
u32 mdio_max_freq;
/*
* phy_id can be one of the following:
* - NULL : use the first phy on the bus,
* - "" : force to 100/full, no mdio control
* - "<bus>:<addr>" : use the specified bus and phy
*/
const char *phy_id;
u8 rmii_en;
u8 version;
void (*interrupt_enable) (void);