From 58230c2c443bc9801293f6535144d04ceaf731e0 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 4 Dec 2014 09:10:21 -0600 Subject: [PATCH] ARM: dts: am437x-sk: fix lcd enable pin mux data Caused by a copy & paste error. Note that even with this bug AM437x SK display still works because GPIO mux mode is always enabled. It's still wrong to mux somebody else's pin. Luckily ball D25 (offset 0x238 - gpio5_8) on AM437x isn't used for anything. While at that, also replace a pullup with a pulldown as that gpio should be normally low, not high. Cc: # v3.17+ Acked-by: Tomi Valkeinen Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-sk-evm.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 87aa4f3b8b3d..0efd3ecc59b7 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -320,8 +320,7 @@ lcd_pins: lcd_pins { pinctrl-single,pins = < - /* GPIO 5_8 to select LCD / HDMI */ - 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */ >; }; };