Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-23 12:42:02 +00:00
Code Issues Packages Projects Releases Wiki Activity

ARM: SoC fixes

Browse Source 
I've been sitting on these longer than I meant, so the patch count is
 a bit higher than ideal for this part of the release. There's also some
 reverts of double-applied patches that brings the diffstat up a bit.
 
 With that said, the biggest changes are:
 
  - Revert of duplicate i2c device addition on two Aspeed (BMC) Devicetrees.
  - Move of two device nodes that got applied to the wrong part of the
    tree on ASpeed G6.
  - Regulator fix for Beaglebone X15 (adding 12/5V supplies)
  - Use interrupts for keys on Amlogic SM1 to avoid missed polls
 
 In addition to that, there is a collection of smaller DT fixes:
 
  - Power supply assignment fixes for i.MX6
  - Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit
  - Build fixlets (selects) for davinci/omap2+
  - More interrupt number fixes for Stratix10, Amlogic SM1, etc.
  - ... and more similar fixes across different platforms
 
 And some non-DT stuff:
 
  - optee fix to register multiple shared pages properly
  - Clock calculation fixes for MMP3
  - Clock fixes for OMAP as well
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl4hIooPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3vckP/jT/yrodXuK3OLtBnDQI4Em5b14uJQxEAsh+
 fTaz1H3n82PaWJVaEXpRTYMa4WZnmMPazoAoDhuqWnz/VbzfXmufFIIXsQ0rJqbf
 Ht1LWvx7hd5q49aq2x1o9Nuo5OKMbW8igQqsx7PqjSOQRaAZTkxZhOI1C9pKnnnD
 oJU8nw19N8yCQILxXMmpBX2vczWyJ3tgH6v8rhB89riBXouqwcKbTRyI0ciFdO91
 mPlfF9qwqZ99bb+7WqalrtOr+/0VgvhB3oCNzoWYPptipiaLGdH4ZXVEhyCUDmrY
 WN1kZsBtK+jtDLcMdRqg+EmbijxcxA0DSLDCow1QwuMPNHxVN5du1JN7b4uTvCPX
 sHbrDO/YdiSWx20VZID/x/sWqcQyBrDqZkA3NWhoClm75JGQUHP16pZUURCN/awy
 IGApkQ5164Ac+2DFHgh3S7qKXWk7O+hY6iksyRPPZkj31d4mCimdVaHDV/c3aeI/
 EnUI6nj6H3ghYTX2gl3yhT8d4yCM+2uSawdIFWGNvB85vs1koAUEuczc6Me8JdZV
 4HWexVs8W0Jo1w3Ndq3Hxw0RTKccC34x1f4dnzSSSEF7t4GMveTdecd/D77aiT2x
 eVNox3PIAfjR96et2vQ1C+hVRyEqn/hDapvR5OI/78F2ampee8m8tWQDYIlH/RbZ
 pdBTN5CS
 =MMJu
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "I've been sitting on these longer than I meant, so the patch count is
  a bit higher than ideal for this part of the release. There's also
  some reverts of double-applied patches that brings the diffstat up a
  bit.

  With that said, the biggest changes are:

   - Revert of duplicate i2c device addition on two Aspeed (BMC)
     Devicetrees.

   - Move of two device nodes that got applied to the wrong part of the
     tree on ASpeed G6.

   - Regulator fix for Beaglebone X15 (adding 12/5V supplies)

   - Use interrupts for keys on Amlogic SM1 to avoid missed polls

  In addition to that, there is a collection of smaller DT fixes:

   - Power supply assignment fixes for i.MX6

   - Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit

   - Build fixlets (selects) for davinci/omap2+

   - More interrupt number fixes for Stratix10, Amlogic SM1, etc.

   - ... and more similar fixes across different platforms

  And some non-DT stuff:

   - optee fix to register multiple shared pages properly

   - Clock calculation fixes for MMP3

   - Clock fixes for OMAP as well"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
  MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms
  ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support
  ARM: dts: imx6sll-evk: Remove incorrect power supply assignment
  ARM: dts: imx6sl-evk: Remove incorrect power supply assignment
  ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment
  ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment
  ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
  ARM: omap2plus: select RESET_CONTROLLER
  ARM: davinci: select CONFIG_RESET_CONTROLLER
  ARM: dts: aspeed: rainier: Fix fan fault and presence
  ARM: dts: aspeed: rainier: Remove duplicate i2c busses
  ARM: dts: aspeed: tacoma: Remove duplicate flash nodes
  ARM: dts: aspeed: tacoma: Remove duplicate i2c busses
  ARM: dts: aspeed: tacoma: Fix fsi master node
  ARM: dts: aspeed-g6: Fix FSI master location
  ARM: dts: mmp3: Fix the TWSI ranges
  clk: mmp2: Fix the order of timer mux parents
  ARM: mmp: do not divide the clock rate
  arm64: dts: rockchip: Fix IR on Beelink A1
  optee: Fix multi page dynamic shm pool alloc
  ...
This commit is contained in:
Linus Torvalds 2020-01-16 19:42:08 -08:00
commit 575966e080
39 changed files with 159 additions and 869 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
MAINTAINERS
View File

@ -1407,7 +1407,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
ARM/ACTIONS SEMI ARCHITECTURE
M: Andreas Färber <afaerber@suse.de>
R: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
N: owl

6
arch/arm/boot/dts/am571x-idk.dts
View File

@ -167,11 +167,7 @@
&pcie1_rc {
status = "okay";
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
&pcie1_ep {
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
};
&mmc1 {

4
arch/arm/boot/dts/am572x-idk-common.dtsi
View File

@ -147,10 +147,6 @@
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
&pcie1_ep {
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {

25
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
View File

@ -29,6 +29,27 @@
reg = <0x0 0x80000000 0x0 0x80000000>;
};
main_12v0: fixedregulator-main_12v0 {
/* main supply */
compatible = "regulator-fixed";
regulator-name = "main_12v0";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-always-on;
regulator-boot-on;
};
evm_5v0: fixedregulator-evm_5v0 {
/* Output of TPS54531D */
compatible = "regulator-fixed";
regulator-name = "evm_5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&main_12v0>;
regulator-always-on;
regulator-boot-on;
};
vdd_3v3: fixedregulator-vdd_3v3 {
compatible = "regulator-fixed";
regulator-name = "vdd_3v3";
@ -547,10 +568,6 @@
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
&pcie1_ep {
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
&mcasp3 {
#sound-dai-cells = <0>;
assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;

369
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
View File

@ -258,9 +258,9 @@
};
};
pca0: pca9552@60 {
pca0: pca9552@61 {
compatible = "nxp,pca9552";
reg = <0x60>;
reg = <0x61>;
#address-cells = <1>;
#size-cells = <0>;
@ -519,371 +519,6 @@
status = "okay";
};
&i2c13 {
status = "okay";
};
&i2c14 {
status = "okay";
};
&i2c15 {
status = "okay";
};
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
power-supply@68 {
compatible = "ibm,cffps2";
reg = <0x68>;
};
power-supply@69 {
compatible = "ibm,cffps2";
reg = <0x69>;
};
power-supply@6a {
compatible = "ibm,cffps2";
reg = <0x6a>;
};
power-supply@6b {
compatible = "ibm,cffps2";
reg = <0x6b>;
};
};
&i2c4 {
status = "okay";
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
tmp275@49 {
compatible = "ti,tmp275";
reg = <0x49>;
};
tmp275@4a {
compatible = "ti,tmp275";
reg = <0x4a>;
};
};
&i2c5 {
status = "okay";
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
tmp275@49 {
compatible = "ti,tmp275";
reg = <0x49>;
};
};
&i2c6 {
status = "okay";
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
tmp275@4a {
compatible = "ti,tmp275";
reg = <0x4a>;
};
tmp275@4b {
compatible = "ti,tmp275";
reg = <0x4b>;
};
};
&i2c7 {
status = "okay";
si7021-a20@20 {
compatible = "silabs,si7020";
reg = <0x20>;
};
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
max31785@52 {
compatible = "maxim,max31785a";
reg = <0x52>;
#address-cells = <1>;
#size-cells = <0>;
fan@0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
};
fan@1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
};
fan@2 {
compatible = "pmbus-fan";
reg = <2>;
tach-pulses = <2>;
};
fan@3 {
compatible = "pmbus-fan";
reg = <3>;
tach-pulses = <2>;
};
};
pca0: pca9552@60 {
compatible = "nxp,pca9552";
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio@0 {
reg = <0>;
};
gpio@1 {
reg = <1>;
};
gpio@2 {
reg = <2>;
};
gpio@3 {
reg = <3>;
};
gpio@4 {
reg = <4>;
};
gpio@5 {
reg = <5>;
};
gpio@6 {
reg = <6>;
};
gpio@7 {
reg = <7>;
};
gpio@8 {
reg = <8>;
};
gpio@9 {
reg = <9>;
};
gpio@10 {
reg = <10>;
};
gpio@11 {
reg = <11>;
};
gpio@12 {
reg = <12>;
};
gpio@13 {
reg = <13>;
};
gpio@14 {
reg = <14>;
};
gpio@15 {
reg = <15>;
};
};
dps: dps310@76 {
compatible = "infineon,dps310";
reg = <0x76>;
#io-channel-cells = <0>;
};
};
&i2c8 {
status = "okay";
ucd90320@b {
compatible = "ti,ucd90160";
reg = <0x0b>;
};
ucd90320@c {
compatible = "ti,ucd90160";
reg = <0x0c>;
};
ucd90320@11 {
compatible = "ti,ucd90160";
reg = <0x11>;
};
rtc@32 {
compatible = "epson,rx8900";
reg = <0x32>;
};
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
tmp275@4a {
compatible = "ti,tmp275";
reg = <0x4a>;
};
};
&i2c9 {
status = "okay";
ir35221@42 {
compatible = "infineon,ir35221";
reg = <0x42>;
};
ir35221@43 {
compatible = "infineon,ir35221";
reg = <0x43>;
};
ir35221@44 {
compatible = "infineon,ir35221";
reg = <0x44>;
};
tmp423a@4c {
compatible = "ti,tmp423";
reg = <0x4c>;
};
tmp423b@4d {
compatible = "ti,tmp423";
reg = <0x4d>;
};
ir35221@72 {
compatible = "infineon,ir35221";
reg = <0x72>;
};
ir35221@73 {
compatible = "infineon,ir35221";
reg = <0x73>;
};
ir35221@74 {
compatible = "infineon,ir35221";
reg = <0x74>;
};
};
&i2c10 {
status = "okay";
ir35221@42 {
compatible = "infineon,ir35221";
reg = <0x42>;
};
ir35221@43 {
compatible = "infineon,ir35221";
reg = <0x43>;
};
ir35221@44 {
compatible = "infineon,ir35221";
reg = <0x44>;
};
tmp423a@4c {
compatible = "ti,tmp423";
reg = <0x4c>;
};
tmp423b@4d {
compatible = "ti,tmp423";
reg = <0x4d>;
};
ir35221@72 {
compatible = "infineon,ir35221";
reg = <0x72>;
};
ir35221@73 {
compatible = "infineon,ir35221";
reg = <0x73>;
};
ir35221@74 {
compatible = "infineon,ir35221";
reg = <0x74>;
};
};
&i2c11 {
status = "okay";
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
tmp275@49 {
compatible = "ti,tmp275";
reg = <0x49>;
};
};
&i2c12 {
status = "okay";
};
&i2c13 {
status = "okay";

403
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
View File

@ -122,37 +122,6 @@
};
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
label = "bmc";
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout-128.dtsi"
};
flash@1 {
status = "okay";
m25p,fast-read;
label = "alt-bmc";
spi-max-frequency = <50000000>;
};
};
&spi1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
flash@0 {
status = "okay";
m25p,fast-read;
label = "pnor";
spi-max-frequency = <100000000>;
};
};
&mac2 {
status = "okay";
pinctrl-names = "default";
@ -165,6 +134,11 @@
&emmc {
status = "okay";
};
&fsim0 {
status = "okay";
#address-cells = <2>;
#size-cells = <0>;
@ -820,373 +794,6 @@
status = "okay";
};
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
bmp: bmp280@77 {
compatible = "bosch,bmp280";
reg = <0x77>;
#io-channel-cells = <1>;
};
max31785@52 {
compatible = "maxim,max31785a";
reg = <0x52>;
#address-cells = <1>;
#size-cells = <0>;
fan@0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
maxim,fan-rotor-input = "tach";
maxim,fan-pwm-freq = <25000>;
maxim,fan-dual-tach;
maxim,fan-no-watchdog;
maxim,fan-no-fault-ramp;
maxim,fan-ramp = <2>;
maxim,fan-fault-pin-mon;
};
fan@1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
maxim,fan-rotor-input = "tach";
maxim,fan-pwm-freq = <25000>;
maxim,fan-dual-tach;
maxim,fan-no-watchdog;
maxim,fan-no-fault-ramp;
maxim,fan-ramp = <2>;
maxim,fan-fault-pin-mon;
};
fan@2 {
compatible = "pmbus-fan";
reg = <2>;
tach-pulses = <2>;
maxim,fan-rotor-input = "tach";
maxim,fan-pwm-freq = <25000>;
maxim,fan-dual-tach;
maxim,fan-no-watchdog;
maxim,fan-no-fault-ramp;
maxim,fan-ramp = <2>;
maxim,fan-fault-pin-mon;
};
fan@3 {
compatible = "pmbus-fan";
reg = <3>;
tach-pulses = <2>;
maxim,fan-rotor-input = "tach";
maxim,fan-pwm-freq = <25000>;
maxim,fan-dual-tach;
maxim,fan-no-watchdog;
maxim,fan-no-fault-ramp;
maxim,fan-ramp = <2>;
maxim,fan-fault-pin-mon;
};
};
dps: dps310@76 {
compatible = "infineon,dps310";
reg = <0x76>;
#io-channel-cells = <0>;
};
pca0: pca9552@60 {
compatible = "nxp,pca9552";
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio@0 {
reg = <0>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@1 {
reg = <1>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@2 {
reg = <2>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@3 {
reg = <3>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@4 {
reg = <4>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@5 {
reg = <5>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@6 {
reg = <6>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@7 {
reg = <7>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@8 {
reg = <8>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@9 {
reg = <9>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@10 {
reg = <10>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@11 {
reg = <11>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@12 {
reg = <12>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@13 {
reg = <13>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@14 {
reg = <14>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@15 {
reg = <15>;
type = <PCA955X_TYPE_GPIO>;
};
};
power-supply@68 {
compatible = "ibm,cffps1";
reg = <0x68>;
};
power-supply@69 {
compatible = "ibm,cffps1";
reg = <0x69>;
};
};
&i2c4 {
status = "okay";
tmp423a@4c {
compatible = "ti,tmp423";
reg = <0x4c>;
};
ir35221@70 {
compatible = "infineon,ir35221";
reg = <0x70>;
};
ir35221@71 {
compatible = "infineon,ir35221";
reg = <0x71>;
};
};
&i2c5 {
status = "okay";
tmp423a@4c {
compatible = "ti,tmp423";
reg = <0x4c>;
};
ir35221@70 {
compatible = "infineon,ir35221";
reg = <0x70>;
};
ir35221@71 {
compatible = "infineon,ir35221";
reg = <0x71>;
};
};
&i2c7 {
status = "okay";
};
&i2c9 {
status = "okay";
tmp275@4a {
compatible = "ti,tmp275";
reg = <0x4a>;
};
};
&i2c10 {
status = "okay";
};
&i2c11 {
status = "okay";
pca9552: pca9552@60 {
compatible = "nxp,pca9552";
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
"GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF",
"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
"GPU4_TH_OVERT_N_BUFF", "GPU5_TH_OVERT_N_BUFF",
"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
gpio@0 {
reg = <0>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@1 {
reg = <1>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@2 {
reg = <2>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@3 {
reg = <3>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@4 {
reg = <4>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@5 {
reg = <5>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@6 {
reg = <6>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@7 {
reg = <7>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@8 {
reg = <8>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@9 {
reg = <9>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@10 {
reg = <10>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@11 {
reg = <11>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@12 {
reg = <12>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@13 {
reg = <13>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@14 {
reg = <14>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@15 {
reg = <15>;
type = <PCA955X_TYPE_GPIO>;
};
};
rtc@32 {
compatible = "epson,rx8900";
reg = <0x32>;
};
eeprom@51 {
compatible = "atmel,24c64";
reg = <0x51>;
};
ucd90160@64 {
compatible = "ti,ucd90160";
reg = <0x64>;
};
};
&i2c12 {
status = "okay";
};
&i2c13 {
status = "okay";
};
&pinctrl {
/* Hog these as no driver is probed for the entire LPC block */
pinctrl-names = "default";

39
arch/arm/boot/dts/aspeed-g6.dtsi
View File

@ -163,26 +163,6 @@
spi-max-frequency = <50000000>;
status = "disabled";
};
fsim0: fsi@1e79b000 {
compatible = "aspeed,ast2600-fsi-master", "fsi-master";
reg = <0x1e79b000 0x94>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fsi1_default>;
clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
status = "disabled";
};
fsim1: fsi@1e79b100 {
compatible = "aspeed,ast2600-fsi-master", "fsi-master";
reg = <0x1e79b100 0x94>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fsi2_default>;
clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
status = "disabled";
};
};
mdio0: mdio@1e650000 {
@ -595,6 +575,25 @@
ranges = <0 0x1e78a000 0x1000>;
};
fsim0: fsi@1e79b000 {
compatible = "aspeed,ast2600-fsi-master", "fsi-master";
reg = <0x1e79b000 0x94>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fsi1_default>;
clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
status = "disabled";
};
fsim1: fsi@1e79b100 {
compatible = "aspeed,ast2600-fsi-master", "fsi-master";
reg = <0x1e79b100 0x94>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fsi2_default>;
clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
status = "disabled";
};
};
};
};

2
arch/arm/boot/dts/imx6dl-icore-mipi.dts
View File

@ -8,7 +8,7 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-icore.dtsi"
#include "imx6qdl-icore-1.5.dtsi"
/ {
model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit";

2
arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
View File

@ -63,7 +63,7 @@
#sound-dai-cells = <0>;
clocks = <&clk_ext_audio_codec>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
VDDIO-supply = <&sw2_reg>;
};
};

2
arch/arm/boot/dts/imx6q-dhcom-som.dtsi
View File

@ -204,7 +204,7 @@
};
rtc@56 {
compatible = "rv3029c2";
compatible = "microcrystal,rv3029";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc_hw300>;
reg = <0x56>;

4
arch/arm/boot/dts/imx6qdl-sabresd.dtsi
View File

@ -749,10 +749,6 @@
vin-supply = <&vgen5_reg>;
};
&reg_vdd3p0 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&vgen5_reg>;
};

4
arch/arm/boot/dts/imx6sl-evk.dts
View File

@ -584,10 +584,6 @@
vin-supply = <&sw2_reg>;
};
&reg_vdd3p0 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&sw2_reg>;
};

4
arch/arm/boot/dts/imx6sll-evk.dts
View File

@ -265,10 +265,6 @@
status = "okay";
};
&reg_3p0 {
vin-supply = <&sw2_reg>;
};
&snvs_poweroff {
status = "okay";
};

4
arch/arm/boot/dts/imx6sx-sdb-reva.dts
View File

@ -159,10 +159,6 @@
vin-supply = <&vgen6_reg>;
};
&reg_vdd3p0 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&vgen6_reg>;
};

4
arch/arm/boot/dts/imx6sx-sdb.dts
View File

@ -141,10 +141,6 @@
vin-supply = <&vgen6_reg>;
};
&reg_vdd3p0 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&vgen6_reg>;
};

4
arch/arm/boot/dts/imx7s-colibri.dtsi
View File

@ -49,3 +49,7 @@
reg = <0x80000000 0x10000000>;
};
};
&gpmi {
status = "okay";
};

4
arch/arm/boot/dts/imx7ulp.dtsi
View File

@ -37,10 +37,10 @@
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
cpu0: cpu@f00 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
reg = <0xf00>;
};
};

2
arch/arm/boot/dts/meson8.dtsi
View File

@ -253,7 +253,7 @@
&aobus {
pmu: pmu@e0 {
compatible = "amlogic,meson8-pmu", "syscon";
reg = <0xe0 0x8>;
reg = <0xe0 0x18>;
};
pinctrl_aobus: pinctrl@84 {

12
arch/arm/boot/dts/mmp3.dtsi
View File

@ -356,7 +356,7 @@
twsi1: i2c@d4011000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4011000 0x1000>;
reg = <0xd4011000 0x70>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&soc_clocks MMP2_CLK_TWSI0>;
resets = <&soc_clocks MMP2_CLK_TWSI0>;
@ -368,7 +368,7 @@
twsi2: i2c@d4031000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4031000 0x1000>;
reg = <0xd4031000 0x70>;
interrupt-parent = <&twsi_mux>;
interrupts = <0>;
clocks = <&soc_clocks MMP2_CLK_TWSI1>;
@ -380,7 +380,7 @@
twsi3: i2c@d4032000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4032000 0x1000>;
reg = <0xd4032000 0x70>;
interrupt-parent = <&twsi_mux>;
interrupts = <1>;
clocks = <&soc_clocks MMP2_CLK_TWSI2>;
@ -392,7 +392,7 @@
twsi4: i2c@d4033000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4033000 0x1000>;
reg = <0xd4033000 0x70>;
interrupt-parent = <&twsi_mux>;
interrupts = <2>;
clocks = <&soc_clocks MMP2_CLK_TWSI3>;
@ -405,7 +405,7 @@
twsi5: i2c@d4033800 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4033800 0x1000>;
reg = <0xd4033800 0x70>;
interrupt-parent = <&twsi_mux>;
interrupts = <3>;
clocks = <&soc_clocks MMP2_CLK_TWSI4>;
@ -417,7 +417,7 @@
twsi6: i2c@d4034000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4034000 0x1000>;
reg = <0xd4034000 0x70>;
interrupt-parent = <&twsi_mux>;
interrupts = <4>;
clocks = <&soc_clocks MMP2_CLK_TWSI5>;

2
arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
View File

@ -101,7 +101,7 @@
initial-mode = <1>; /* initialize in HUB mode */
disabled-ports = <1>;
intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
refclk-frequency = <19200000>;
};

1
arch/arm/mach-davinci/Kconfig
View File

@ -9,6 +9,7 @@ menuconfig ARCH_DAVINCI
select PM_GENERIC_DOMAINS if PM
select PM_GENERIC_DOMAINS_OF if PM && OF
select REGMAP_MMIO
select RESET_CONTROLLER
select HAVE_IDE
select PINCTRL_SINGLE

2
arch/arm/mach-mmp/time.c
View File

@ -207,7 +207,7 @@ static int __init mmp_dt_init_timer(struct device_node *np)
ret = clk_prepare_enable(clk);
if (ret)
return ret;
rate = clk_get_rate(clk) / 2;
rate = clk_get_rate(clk);
} else if (cpu_is_pj4()) {
rate = 6500000;
} else {

3
arch/arm/mach-omap2/Kconfig
View File

@ -95,6 +95,7 @@ config ARCH_OMAP2PLUS
bool
select ARCH_HAS_BANDGAP
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_HAS_RESET_CONTROLLER
select ARCH_OMAP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
@ -105,11 +106,11 @@ config ARCH_OMAP2PLUS
select OMAP_DM_TIMER
select OMAP_GPMC
select PINCTRL
select RESET_CONTROLLER
select SOC_BUS
select TI_SYSC
select OMAP_IRQCHIP
select CLKSRC_TI_32K
select ARCH_HAS_RESET_CONTROLLER
help
Systems based on OMAP2, OMAP3, OMAP4 or OMAP5

6
arch/arm/mach-omap2/pdata-quirks.c
View File

@ -306,10 +306,14 @@ static void __init dra7x_evm_mmc_quirk(void)
static struct clockdomain *ti_sysc_find_one_clockdomain(struct clk *clk)
{
struct clk_hw *hw = __clk_get_hw(clk);
struct clockdomain *clkdm = NULL;
struct clk_hw_omap *hwclk;
hwclk = to_clk_hw_omap(__clk_get_hw(clk));
hwclk = to_clk_hw_omap(hw);
if (!omap2_clk_is_hw_omap(hw))
return NULL;
if (hwclk && hwclk->clkdm_name)
clkdm = clkdm_lookup(hwclk->clkdm_name);

2
arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
View File

@ -15,7 +15,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_eldo1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;

2
arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
View File

@ -140,7 +140,7 @@
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_aldo2>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_dldo4>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;

8
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
View File

@ -61,10 +61,10 @@
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <0 120 8>,
<0 121 8>,
<0 122 8>,
<0 123 8>;
interrupts = <0 170 4>,
<0 171 4>,
<0 172 4>,
<0 173 4>;
interrupt-affinity = <&cpu0>,
<&cpu1>,
<&cpu2>,

28
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
View File

@ -46,25 +46,47 @@
};
gpio-keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
compatible = "gpio-keys";
key1 {
label = "A";
linux,code = <BTN_0>;
gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
};
key2 {
label = "B";
linux,code = <BTN_1>;
gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
};
key3 {
label = "C";
linux,code = <BTN_2>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
};
mic_mute {
label = "MicMute";
linux,code = <SW_MUTE_DEVICE>;
linux,input-type = <EV_SW>;
gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
};
power_key {
label = "PowerKey";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
};
};
@ -569,6 +591,8 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
interrupt-parent = <&gpio_intc>;
interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
max-speed = <2000000>;
clocks = <&wifi32k>;

2
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
View File

@ -175,7 +175,7 @@
dcfg: syscon@1e00000 {
compatible = "fsl,ls1028a-dcfg", "syscon";
reg = <0x0 0x1e00000 0x0 0x10000>;
big-endian;
little-endian;
};
rst: syscon@1e60000 {

2
arch/arm64/boot/dts/freescale/imx8mm.dtsi
View File

@ -740,7 +740,7 @@
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
<&clk IMX8MM_CLK_SDMA1_ROOT>;
<&clk IMX8MM_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";

2
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
View File

@ -421,7 +421,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_imu>;
interrupt-parent = <&gpio3>;
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
vdd-supply = <&reg_3v3_p>;
vddio-supply = <&reg_3v3_p>;
};

8
arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
View File

@ -60,10 +60,10 @@
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <0 120 8>,
<0 121 8>,
<0 122 8>,
<0 123 8>;
interrupts = <0 170 4>,
<0 171 4>,
<0 172 4>,
<0 173 4>;
interrupt-affinity = <&cpu0>,
<&cpu1>,
<&cpu2>,

3
arch/arm64/boot/dts/rockchip/rk3328-a1.dts
View File

@ -49,7 +49,8 @@
ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
linux,rc-map-name = "rc-beelink-gs1";
};
};

10
drivers/bus/ti-sysc.c
View File

@ -343,6 +343,12 @@ static int sysc_get_clocks(struct sysc *ddata)
return -EINVAL;
}
/* Always add a slot for main clocks fck and ick even if unused */
if (!nr_fck)
ddata->nr_clocks++;
if (!nr_ick)
ddata->nr_clocks++;
ddata->clocks = devm_kcalloc(ddata->dev,
ddata->nr_clocks, sizeof(*ddata->clocks),
GFP_KERNEL);
@ -421,7 +427,7 @@ static int sysc_enable_opt_clocks(struct sysc *ddata)
struct clk *clock;
int i, error;
if (!ddata->clocks)
if (!ddata->clocks || ddata->nr_clocks < SYSC_OPTFCK0 + 1)
return 0;
for (i = SYSC_OPTFCK0; i < SYSC_MAX_CLOCKS; i++) {
@ -455,7 +461,7 @@ static void sysc_disable_opt_clocks(struct sysc *ddata)
struct clk *clock;
int i;
if (!ddata->clocks)
if (!ddata->clocks || ddata->nr_clocks < SYSC_OPTFCK0 + 1)
return;
for (i = SYSC_OPTFCK0; i < SYSC_MAX_CLOCKS; i++) {

2
drivers/clk/mmp/clk-of-mmp2.c
View File

@ -134,7 +134,7 @@ static DEFINE_SPINLOCK(ssp3_lock);
static const char *ssp_parent_names[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
static DEFINE_SPINLOCK(timer_lock);
static const char *timer_parent_names[] = {"clk32", "vctcxo_2", "vctcxo_4", "vctcxo"};
static const char *timer_parent_names[] = {"clk32", "vctcxo_4", "vctcxo_2", "vctcxo"};
static DEFINE_SPINLOCK(reset_lock);

20
drivers/soc/amlogic/meson-ee-pwrc.c
View File

@ -323,6 +323,8 @@ static int meson_ee_pwrc_init_domain(struct platform_device *pdev,
struct meson_ee_pwrc *pwrc,
struct meson_ee_pwrc_domain *dom)
{
int ret;
dom->pwrc = pwrc;
dom->num_rstc = dom->desc.reset_names_count;
dom->num_clks = dom->desc.clk_names_count;
@ -368,15 +370,21 @@ static int meson_ee_pwrc_init_domain(struct platform_device *pdev,
* prepare/enable counters won't be in sync.
*/
if (dom->num_clks && dom->desc.get_power && !dom->desc.get_power(dom)) {
int ret = clk_bulk_prepare_enable(dom->num_clks, dom->clks);
ret = clk_bulk_prepare_enable(dom->num_clks, dom->clks);
if (ret)
return ret;
pm_genpd_init(&dom->base, &pm_domain_always_on_gov, false);
} else
pm_genpd_init(&dom->base, NULL,
ret = pm_genpd_init(&dom->base, &pm_domain_always_on_gov,
false);
if (ret)
return ret;
} else {
ret = pm_genpd_init(&dom->base, NULL,
(dom->desc.get_power ?
dom->desc.get_power(dom) : true));
if (ret)
return ret;
}
return 0;
}
@ -441,9 +449,7 @@ static int meson_ee_pwrc_probe(struct platform_device *pdev)
pwrc->xlate.domains[i] = &dom->base;
}
of_genpd_add_provider_onecell(pdev->dev.of_node, &pwrc->xlate);
return 0;
return of_genpd_add_provider_onecell(pdev->dev.of_node, &pwrc->xlate);
}
static void meson_ee_pwrc_shutdown(struct platform_device *pdev)

4
drivers/soc/ti/wkup_m3_ipc.c
View File

@ -419,6 +419,8 @@ static void wkup_m3_rproc_boot_thread(struct wkup_m3_ipc *m3_ipc)
ret = rproc_boot(m3_ipc->rproc);
if (ret)
dev_err(dev, "rproc_boot failed\n");
else
m3_ipc_state = m3_ipc;
do_exit(0);
}
@ -505,8 +507,6 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
goto err_put_rproc;
}
m3_ipc_state = m3_ipc;
return 0;
err_put_rproc:

15
drivers/tee/optee/shm_pool.c
View File

@ -28,9 +28,22 @@ static int pool_op_alloc(struct tee_shm_pool_mgr *poolm,
shm->size = PAGE_SIZE << order;
if (shm->flags & TEE_SHM_DMA_BUF) {
unsigned int nr_pages = 1 << order, i;
struct page **pages;
pages = kcalloc(nr_pages, sizeof(pages), GFP_KERNEL);
if (!pages)
return -ENOMEM;
for (i = 0; i < nr_pages; i++) {
pages[i] = page;
page++;
}
shm->flags |= TEE_SHM_REGISTER;
rc = optee_shm_register(shm->ctx, shm, &page, 1 << order,
rc = optee_shm_register(shm->ctx, shm, pages, nr_pages,
(unsigned long)shm->kaddr);
kfree(pages);
}
return rc;

6
include/dt-bindings/reset/amlogic,meson8b-reset.h
View File

@ -46,9 +46,9 @@
#define RESET_VD_RMEM 64
#define RESET_AUDIN 65
#define RESET_DBLK 66
#define RESET_PIC_DC 66
#define RESET_PSC 66
#define RESET_NAND 66
#define RESET_PIC_DC 67
#define RESET_PSC 68
#define RESET_NAND 69
#define RESET_GE2D 70
#define RESET_PARSER_REG 71
#define RESET_PARSER_FETCH 72