diff --git a/drivers/staging/bcm/Bcmchar.c b/drivers/staging/bcm/Bcmchar.c
index 2cf64df22938..6385b57572fa 100644
--- a/drivers/staging/bcm/Bcmchar.c
+++ b/drivers/staging/bcm/Bcmchar.c
@@ -268,7 +268,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 				(uiTempVar == EEPROM_REJECT_REG_3) ||
 				(uiTempVar == EEPROM_REJECT_REG_4))) {
 
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "EEPROM Access Denied, not in VSG Mode\n");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+					"EEPROM Access Denied, not in VSG Mode\n");
 			return -EFAULT;
 		}
 
@@ -276,9 +277,11 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 				(PUINT)sWrmBuffer.Data, sizeof(ULONG));
 
 		if (Status == STATUS_SUCCESS) {
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "WRM Done\n");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+					DBG_LVL_ALL, "WRM Done\n");
 		} else {
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "WRM Failed\n");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+					DBG_LVL_ALL, "WRM Failed\n");
 			Status = -EFAULT;
 		}
 		break;
@@ -293,7 +296,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 			(Adapter->bShutStatus == TRUE) ||
 			(Adapter->bPreparingForLowPowerMode == TRUE)) {
 
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Device in Idle Mode, Blocking Rdms\n");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+					"Device in Idle Mode, Blocking Rdms\n");
 			return -EACCES;
 		}
 
@@ -319,7 +323,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		if ((((ULONG)sRdmBuffer.Register & 0x0F000000) != 0x0F000000) ||
 			((ULONG)sRdmBuffer.Register & 0x3)) {
 
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM Done On invalid Address : %x Access Denied.\n",
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+					"RDM Done On invalid Address : %x Access Denied.\n",
 					(int)sRdmBuffer.Register);
 
 			kfree(temp_buff);
@@ -327,7 +332,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		}
 
 		uiTempVar = sRdmBuffer.Register & EEPROM_REJECT_MASK;
-		bytes = rdmaltWithLock(Adapter, (UINT)sRdmBuffer.Register, (PUINT)temp_buff, IoBuffer.OutputLength);
+		bytes = rdmaltWithLock(Adapter, (UINT)sRdmBuffer.Register,
+				       (PUINT)temp_buff, IoBuffer.OutputLength);
 
 		if (bytes > 0) {
 			Status = STATUS_SUCCESS;
@@ -351,7 +357,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 			(Adapter->bShutStatus == TRUE) ||
 			(Adapter->bPreparingForLowPowerMode == TRUE)) {
 
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Device in Idle Mode, Blocking Wrms\n");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+					"Device in Idle Mode, Blocking Wrms\n");
 			return -EACCES;
 		}
 
@@ -369,7 +376,9 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		if ((((ULONG)sWrmBuffer.Register & 0x0F000000) != 0x0F000000) ||
 			((ULONG)sWrmBuffer.Register & 0x3)) {
 
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM Done On invalid Address : %x Access Denied.\n", (int)sWrmBuffer.Register);
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+					"WRM Done On invalid Address : %x Access Denied.\n",
+					(int)sWrmBuffer.Register);
 			return -EINVAL;
 		}
 
@@ -381,17 +390,21 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 				(uiTempVar == EEPROM_REJECT_REG_4)) &&
 				(cmd == IOCTL_BCM_REGISTER_WRITE)) {
 
-				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "EEPROM Access Denied, not in VSG Mode\n");
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+						"EEPROM Access Denied, not in VSG Mode\n");
 				return -EFAULT;
 		}
 
 		Status = wrmaltWithLock(Adapter, (UINT)sWrmBuffer.Register,
-					(PUINT)sWrmBuffer.Data, sWrmBuffer.Length);
+					(PUINT)sWrmBuffer.Data,
+					sWrmBuffer.Length);
 
 		if (Status == STATUS_SUCCESS) {
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, OSAL_DBG, DBG_LVL_ALL, "WRM Done\n");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, OSAL_DBG,
+					DBG_LVL_ALL, "WRM Done\n");
 		} else {
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "WRM Failed\n");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+					DBG_LVL_ALL, "WRM Failed\n");
 			Status = -EFAULT;
 		}
 		break;
@@ -407,7 +420,9 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 			(Adapter->bShutStatus == TRUE) ||
 			(Adapter->bPreparingForLowPowerMode == TRUE)) {
 
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "GPIO Can't be set/clear in Low power Mode");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+					DBG_LVL_ALL,
+					"GPIO Can't be set/clear in Low power Mode");
 			return -EACCES;
 		}
 
@@ -425,7 +440,10 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		value = (1<<uiBit);
 
 		if (IsReqGpioIsLedInNVM(Adapter, value) == false) {
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Sorry, Requested GPIO<0x%X> is not correspond to LED !!!", value);
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+					DBG_LVL_ALL,
+					"Sorry, Requested GPIO<0x%X> is not correspond to LED !!!",
+					value);
 			Status = -EINVAL;
 			break;
 		}
@@ -433,27 +451,42 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		/* Set - setting 1 */
 		if (uiOperation) {
 			/* Set the gpio output register */
-			Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG, (PUINT)(&value), sizeof(UINT));
+			Status = wrmaltWithLock(Adapter,
+						BCM_GPIO_OUTPUT_SET_REG,
+						(PUINT)(&value), sizeof(UINT));
 
 			if (Status == STATUS_SUCCESS) {
-				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Set the GPIO bit\n");
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+						OSAL_DBG, DBG_LVL_ALL,
+						"Set the GPIO bit\n");
 			} else {
-				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Failed to set the %dth GPIO\n", uiBit);
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+						OSAL_DBG, DBG_LVL_ALL,
+						"Failed to set the %dth GPIO\n",
+						uiBit);
 				break;
 			}
 		} else {
 			/* Set the gpio output register */
-			Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, (PUINT)(&value), sizeof(UINT));
+			Status = wrmaltWithLock(Adapter,
+						BCM_GPIO_OUTPUT_CLR_REG,
+						(PUINT)(&value), sizeof(UINT));
 
 			if (Status == STATUS_SUCCESS) {
-				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Set the GPIO bit\n");
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+						OSAL_DBG, DBG_LVL_ALL,
+						"Set the GPIO bit\n");
 			} else {
-				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Failed to clear the %dth GPIO\n", uiBit);
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+						OSAL_DBG, DBG_LVL_ALL,
+						"Failed to clear the %dth GPIO\n",
+						uiBit);
 				break;
 			}
 		}
 
-		bytes = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER, (PUINT)ucResetValue, sizeof(UINT));
+		bytes = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER,
+				       (PUINT)ucResetValue, sizeof(UINT));
 		if (bytes < 0) {
 			Status = bytes;
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
@@ -469,9 +502,13 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 					(PUINT)ucResetValue, sizeof(UINT));
 
 		if (Status == STATUS_SUCCESS) {
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Set the GPIO to output Mode\n");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+					DBG_LVL_ALL,
+					"Set the GPIO to output Mode\n");
 		} else {
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Failed to put GPIO in Output Mode\n");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+					DBG_LVL_ALL,
+					"Failed to put GPIO in Output Mode\n");
 			break;
 		}
 	}
@@ -479,13 +516,16 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 
 	case BCM_LED_THREAD_STATE_CHANGE_REQ: {
 		struct bcm_user_thread_req threadReq = {0};
-		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "User made LED thread InActive");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+				"User made LED thread InActive");
 
 		if ((Adapter->IdleMode == TRUE) ||
 			(Adapter->bShutStatus == TRUE) ||
 			(Adapter->bPreparingForLowPowerMode == TRUE)) {
 
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "GPIO Can't be set/clear in Low power Mode");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+					DBG_LVL_ALL,
+					"GPIO Can't be set/clear in Low power Mode");
 			Status = -EACCES;
 			break;
 		}
@@ -502,10 +542,14 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		/* if LED thread is running(Actively or Inactively) set it state to make inactive */
 		if (Adapter->LEDInfo.led_thread_running) {
 			if (threadReq.ThreadState == LED_THREAD_ACTIVATION_REQ) {
-				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Activating thread req");
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+						OSAL_DBG, DBG_LVL_ALL,
+						"Activating thread req");
 				Adapter->DriverState = LED_THREAD_ACTIVE;
 			} else {
-				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "DeActivating Thread req.....");
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+						OSAL_DBG, DBG_LVL_ALL,
+						"DeActivating Thread req.....");
 				Adapter->DriverState = LED_THREAD_INACTIVE;
 			}
 
@@ -542,7 +586,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 
 		if (bytes < 0) {
 			Status = bytes;
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM Failed\n");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+					"RDM Failed\n");
 			return Status;
 		} else {
 			Status = STATUS_SUCCESS;
@@ -572,9 +617,11 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 			return -EFAULT;
 
 		if (IsReqGpioIsLedInNVM(Adapter, pgpio_multi_info[WIMAX_IDX].uiGPIOMask) == false) {
-			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+					DBG_LVL_ALL,
 					"Sorry, Requested GPIO<0x%X> is not correspond to NVM LED bit map<0x%X>!!!",
-					pgpio_multi_info[WIMAX_IDX].uiGPIOMask, Adapter->gpioBitMap);
+					pgpio_multi_info[WIMAX_IDX].uiGPIOMask,
+					Adapter->gpioBitMap);
 			Status = -EINVAL;
 			break;
 		}
@@ -592,7 +639,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 							(PUINT)ucResetValue, sizeof(ULONG));
 
 			if (Status != STATUS_SUCCESS) {
-				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to BCM_GPIO_OUTPUT_SET_REG Failed.");
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+						"WRM to BCM_GPIO_OUTPUT_SET_REG Failed.");
 				return Status;
 			}
 
@@ -605,7 +653,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 				Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, (PUINT)ucResetValue, sizeof(ULONG));
 
 			if (Status != STATUS_SUCCESS) {
-				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to BCM_GPIO_OUTPUT_CLR_REG Failed.");
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+						"WRM to BCM_GPIO_OUTPUT_CLR_REG Failed.");
 				return Status;
 			}
 		}
@@ -615,7 +664,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 
 			if (bytes < 0) {
 				Status = bytes;
-				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM to GPIO_PIN_STATE_REGISTER Failed.");
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+						"RDM to GPIO_PIN_STATE_REGISTER Failed.");
 				return Status;
 			} else {
 				Status = STATUS_SUCCESS;