mirror of
https://github.com/torvalds/linux.git
synced 2024-11-22 20:22:09 +00:00
thermal: sprd: Add Spreadtrum thermal driver support
This patch adds the support for Spreadtrum thermal sensor controller, which can support maximum 8 sensors. Signed-off-by: Freeman Liu <freeman.liu@unisoc.com> Co-developed-with: Baolin Wang <baolin.wang@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/ebeb2839cff4d4027b37e787427c5af0e11880c8.1582013101.git.baolin.wang7@gmail.com
This commit is contained in:
Freeman Liu
Daniel Lezcano
parent
f2ccf917ad
commit
554fdbaf19
@ -460,4 +460,11 @@ config UNIPHIER_THERMAL
|
|||||||
Enable this to plug in UniPhier on-chip PVT thermal driver into the
|
Enable this to plug in UniPhier on-chip PVT thermal driver into the
|
||||||
thermal framework. The driver supports CPU thermal zone temperature
|
thermal framework. The driver supports CPU thermal zone temperature
|
||||||
reporting and a couple of trip points.
|
reporting and a couple of trip points.
|
||||||
|
|
||||||
|
config SPRD_THERMAL
|
||||||
|
tristate "Temperature sensor on Spreadtrum SoCs"
|
||||||
|
depends on ARCH_SPRD || COMPILE_TEST
|
||||||
|
help
|
||||||
|
Support for the Spreadtrum thermal sensor driver in the Linux thermal
|
||||||
|
framework.
|
||||||
endif
|
endif
|
||||||
|
|||||||
@ -57,3 +57,4 @@ obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o
|
|||||||
obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o
|
obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o
|
||||||
obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o
|
obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o
|
||||||
obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o
|
obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o
|
||||||
|
obj-$(CONFIG_SPRD_THERMAL) += sprd_thermal.o
|
||||||
|
|||||||
552
drivers/thermal/sprd_thermal.c
Normal file
552
drivers/thermal/sprd_thermal.c
Normal file
@ -0,0 +1,552 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0
|
||||||
|
// Copyright (C) 2020 Spreadtrum Communications Inc.
|
||||||
|
|
||||||
|
#include <linux/clk.h>
|
||||||
|
#include <linux/io.h>
|
||||||
|
#include <linux/iopoll.h>
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/nvmem-consumer.h>
|
||||||
|
#include <linux/of_device.h>
|
||||||
|
#include <linux/platform_device.h>
|
||||||
|
#include <linux/slab.h>
|
||||||
|
#include <linux/thermal.h>
|
||||||
|
|
||||||
|
#define SPRD_THM_CTL 0x0
|
||||||
|
#define SPRD_THM_INT_EN 0x4
|
||||||
|
#define SPRD_THM_INT_STS 0x8
|
||||||
|
#define SPRD_THM_INT_RAW_STS 0xc
|
||||||
|
#define SPRD_THM_DET_PERIOD 0x10
|
||||||
|
#define SPRD_THM_INT_CLR 0x14
|
||||||
|
#define SPRD_THM_INT_CLR_ST 0x18
|
||||||
|
#define SPRD_THM_MON_PERIOD 0x4c
|
||||||
|
#define SPRD_THM_MON_CTL 0x50
|
||||||
|
#define SPRD_THM_INTERNAL_STS1 0x54
|
||||||
|
#define SPRD_THM_RAW_READ_MSK 0x3ff
|
||||||
|
|
||||||
|
#define SPRD_THM_OFFSET(id) ((id) * 0x4)
|
||||||
|
#define SPRD_THM_TEMP(id) (SPRD_THM_OFFSET(id) + 0x5c)
|
||||||
|
#define SPRD_THM_THRES(id) (SPRD_THM_OFFSET(id) + 0x2c)
|
||||||
|
|
||||||
|
#define SPRD_THM_SEN(id) BIT((id) + 2)
|
||||||
|
#define SPRD_THM_SEN_OVERHEAT_EN(id) BIT((id) + 8)
|
||||||
|
#define SPRD_THM_SEN_OVERHEAT_ALARM_EN(id) BIT((id) + 0)
|
||||||
|
|
||||||
|
/* bits definitions for register THM_CTL */
|
||||||
|
#define SPRD_THM_SET_RDY_ST BIT(13)
|
||||||
|
#define SPRD_THM_SET_RDY BIT(12)
|
||||||
|
#define SPRD_THM_MON_EN BIT(1)
|
||||||
|
#define SPRD_THM_EN BIT(0)
|
||||||
|
|
||||||
|
/* bits definitions for register THM_INT_CTL */
|
||||||
|
#define SPRD_THM_BIT_INT_EN BIT(26)
|
||||||
|
#define SPRD_THM_OVERHEAT_EN BIT(25)
|
||||||
|
#define SPRD_THM_OTP_TRIP_SHIFT 10
|
||||||
|
|
||||||
|
/* bits definitions for register SPRD_THM_INTERNAL_STS1 */
|
||||||
|
#define SPRD_THM_TEMPER_RDY BIT(0)
|
||||||
|
|
||||||
|
#define SPRD_THM_DET_PERIOD_DATA 0x800
|
||||||
|
#define SPRD_THM_DET_PERIOD_MASK GENMASK(19, 0)
|
||||||
|
#define SPRD_THM_MON_MODE 0x7
|
||||||
|
#define SPRD_THM_MON_MODE_MASK GENMASK(3, 0)
|
||||||
|
#define SPRD_THM_MON_PERIOD_DATA 0x10
|
||||||
|
#define SPRD_THM_MON_PERIOD_MASK GENMASK(15, 0)
|
||||||
|
#define SPRD_THM_THRES_MASK GENMASK(19, 0)
|
||||||
|
#define SPRD_THM_INT_CLR_MASK GENMASK(24, 0)
|
||||||
|
|
||||||
|
/* thermal sensor calibration parameters */
|
||||||
|
#define SPRD_THM_TEMP_LOW -40000
|
||||||
|
#define SPRD_THM_TEMP_HIGH 120000
|
||||||
|
#define SPRD_THM_OTP_TEMP 120000
|
||||||
|
#define SPRD_THM_HOT_TEMP 75000
|
||||||
|
#define SPRD_THM_RAW_DATA_LOW 0
|
||||||
|
#define SPRD_THM_RAW_DATA_HIGH 1000
|
||||||
|
#define SPRD_THM_SEN_NUM 8
|
||||||
|
#define SPRD_THM_DT_OFFSET 24
|
||||||
|
#define SPRD_THM_RATION_OFFSET 17
|
||||||
|
#define SPRD_THM_RATION_SIGN 16
|
||||||
|
|
||||||
|
#define SPRD_THM_RDYST_POLLING_TIME 10
|
||||||
|
#define SPRD_THM_RDYST_TIMEOUT 700
|
||||||
|
#define SPRD_THM_TEMP_READY_POLL_TIME 10000
|
||||||
|
#define SPRD_THM_TEMP_READY_TIMEOUT 600000
|
||||||
|
#define SPRD_THM_MAX_SENSOR 8
|
||||||
|
|
||||||
|
struct sprd_thermal_sensor {
|
||||||
|
struct thermal_zone_device *tzd;
|
||||||
|
struct sprd_thermal_data *data;
|
||||||
|
struct device *dev;
|
||||||
|
int cal_slope;
|
||||||
|
int cal_offset;
|
||||||
|
int id;
|
||||||
|
};
|
||||||
|
|
||||||
|
struct sprd_thermal_data {
|
||||||
|
const struct sprd_thm_variant_data *var_data;
|
||||||
|
struct sprd_thermal_sensor *sensor[SPRD_THM_MAX_SENSOR];
|
||||||
|
struct clk *clk;
|
||||||
|
void __iomem *base;
|
||||||
|
u32 ratio_off;
|
||||||
|
int ratio_sign;
|
||||||
|
int nr_sensors;
|
||||||
|
};
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The conversion between ADC and temperature is based on linear relationship,
|
||||||
|
* and use idea_k to specify the slope and ideal_b to specify the offset.
|
||||||
|
*
|
||||||
|
* Since different Spreadtrum SoCs have different ideal_k and ideal_b,
|
||||||
|
* we should save ideal_k and ideal_b in the device data structure.
|
||||||
|
*/
|
||||||
|
struct sprd_thm_variant_data {
|
||||||
|
u32 ideal_k;
|
||||||
|
u32 ideal_b;
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct sprd_thm_variant_data ums512_data = {
|
||||||
|
.ideal_k = 262,
|
||||||
|
.ideal_b = 66400,
|
||||||
|
};
|
||||||
|
|
||||||
|
static inline void sprd_thm_update_bits(void __iomem *reg, u32 mask, u32 val)
|
||||||
|
{
|
||||||
|
u32 tmp, orig;
|
||||||
|
|
||||||
|
orig = readl(reg);
|
||||||
|
tmp = orig & ~mask;
|
||||||
|
tmp |= val & mask;
|
||||||
|
writel(tmp, reg);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int sprd_thm_cal_read(struct device_node *np, const char *cell_id,
|
||||||
|
u32 *val)
|
||||||
|
{
|
||||||
|
struct nvmem_cell *cell;
|
||||||
|
void *buf;
|
||||||
|
size_t len;
|
||||||
|
|
||||||
|
cell = of_nvmem_cell_get(np, cell_id);
|
||||||
|
if (IS_ERR(cell))
|
||||||
|
return PTR_ERR(cell);
|
||||||
|
|
||||||
|
buf = nvmem_cell_read(cell, &len);
|
||||||
|
nvmem_cell_put(cell);
|
||||||
|
if (IS_ERR(buf))
|
||||||
|
return PTR_ERR(buf);
|
||||||
|
|
||||||
|
if (len > sizeof(u32)) {
|
||||||
|
kfree(buf);
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
memcpy(val, buf, len);
|
||||||
|
|
||||||
|
kfree(buf);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int sprd_thm_sensor_calibration(struct device_node *np,
|
||||||
|
struct sprd_thermal_data *thm,
|
||||||
|
struct sprd_thermal_sensor *sen)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
/*
|
||||||
|
* According to thermal datasheet, the default calibration offset is 64,
|
||||||
|
* and the default ratio is 1000.
|
||||||
|
*/
|
||||||
|
int dt_offset = 64, ratio = 1000;
|
||||||
|
|
||||||
|
ret = sprd_thm_cal_read(np, "sen_delta_cal", &dt_offset);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ratio += thm->ratio_sign * thm->ratio_off;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* According to the ideal slope K and ideal offset B, combined with
|
||||||
|
* calibration value of thermal from efuse, then calibrate the real
|
||||||
|
* slope k and offset b:
|
||||||
|
* k_cal = (k * ratio) / 1000.
|
||||||
|
* b_cal = b + (dt_offset - 64) * 500.
|
||||||
|
*/
|
||||||
|
sen->cal_slope = (thm->var_data->ideal_k * ratio) / 1000;
|
||||||
|
sen->cal_offset = thm->var_data->ideal_b + (dt_offset - 128) * 250;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int sprd_thm_rawdata_to_temp(struct sprd_thermal_sensor *sen,
|
||||||
|
u32 rawdata)
|
||||||
|
{
|
||||||
|
clamp(rawdata, (u32)SPRD_THM_RAW_DATA_LOW, (u32)SPRD_THM_RAW_DATA_HIGH);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* According to the thermal datasheet, the formula of converting
|
||||||
|
* adc value to the temperature value should be:
|
||||||
|
* T_final = k_cal * x - b_cal.
|
||||||
|
*/
|
||||||
|
return sen->cal_slope * rawdata - sen->cal_offset;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int sprd_thm_temp_to_rawdata(int temp, struct sprd_thermal_sensor *sen)
|
||||||
|
{
|
||||||
|
u32 val;
|
||||||
|
|
||||||
|
clamp(temp, (int)SPRD_THM_TEMP_LOW, (int)SPRD_THM_TEMP_HIGH);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* According to the thermal datasheet, the formula of converting
|
||||||
|
* adc value to the temperature value should be:
|
||||||
|
* T_final = k_cal * x - b_cal.
|
||||||
|
*/
|
||||||
|
val = (temp + sen->cal_offset) / sen->cal_slope;
|
||||||
|
|
||||||
|
return clamp(val, val, (u32)(SPRD_THM_RAW_DATA_HIGH - 1));
|
||||||
|
}
|
||||||
|
|
||||||
|
static int sprd_thm_read_temp(void *devdata, int *temp)
|
||||||
|
{
|
||||||
|
struct sprd_thermal_sensor *sen = devdata;
|
||||||
|
u32 data;
|
||||||
|
|
||||||
|
data = readl(sen->data->base + SPRD_THM_TEMP(sen->id)) &
|
||||||
|
SPRD_THM_RAW_READ_MSK;
|
||||||
|
|
||||||
|
*temp = sprd_thm_rawdata_to_temp(sen, data);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct thermal_zone_of_device_ops sprd_thm_ops = {
|
||||||
|
.get_temp = sprd_thm_read_temp,
|
||||||
|
};
|
||||||
|
|
||||||
|
static int sprd_thm_poll_ready_status(struct sprd_thermal_data *thm)
|
||||||
|
{
|
||||||
|
u32 val;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Wait for thermal ready status before configuring thermal parameters.
|
||||||
|
*/
|
||||||
|
ret = readl_poll_timeout(thm->base + SPRD_THM_CTL, val,
|
||||||
|
!(val & SPRD_THM_SET_RDY_ST),
|
||||||
|
SPRD_THM_RDYST_POLLING_TIME,
|
||||||
|
SPRD_THM_RDYST_TIMEOUT);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
sprd_thm_update_bits(thm->base + SPRD_THM_CTL, SPRD_THM_MON_EN,
|
||||||
|
SPRD_THM_MON_EN);
|
||||||
|
sprd_thm_update_bits(thm->base + SPRD_THM_CTL, SPRD_THM_SET_RDY,
|
||||||
|
SPRD_THM_SET_RDY);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int sprd_thm_wait_temp_ready(struct sprd_thermal_data *thm)
|
||||||
|
{
|
||||||
|
u32 val;
|
||||||
|
|
||||||
|
/* Wait for first temperature data ready before reading temperature */
|
||||||
|
return readl_poll_timeout(thm->base + SPRD_THM_INTERNAL_STS1, val,
|
||||||
|
!(val & SPRD_THM_TEMPER_RDY),
|
||||||
|
SPRD_THM_TEMP_READY_POLL_TIME,
|
||||||
|
SPRD_THM_TEMP_READY_TIMEOUT);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int sprd_thm_set_ready(struct sprd_thermal_data *thm)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = sprd_thm_poll_ready_status(thm);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Clear interrupt status, enable thermal interrupt and enable thermal.
|
||||||
|
*
|
||||||
|
* The SPRD thermal controller integrates a hardware interrupt signal,
|
||||||
|
* which means if the temperature is overheat, it will generate an
|
||||||
|
* interrupt and notify the event to PMIC automatically to shutdown the
|
||||||
|
* system. So here we should enable the interrupt bits, though we have
|
||||||
|
* not registered an irq handler.
|
||||||
|
*/
|
||||||
|
writel(SPRD_THM_INT_CLR_MASK, thm->base + SPRD_THM_INT_CLR);
|
||||||
|
sprd_thm_update_bits(thm->base + SPRD_THM_INT_EN,
|
||||||
|
SPRD_THM_BIT_INT_EN, SPRD_THM_BIT_INT_EN);
|
||||||
|
sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
|
||||||
|
SPRD_THM_EN, SPRD_THM_EN);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void sprd_thm_sensor_init(struct sprd_thermal_data *thm,
|
||||||
|
struct sprd_thermal_sensor *sen)
|
||||||
|
{
|
||||||
|
u32 otp_rawdata, hot_rawdata;
|
||||||
|
|
||||||
|
otp_rawdata = sprd_thm_temp_to_rawdata(SPRD_THM_OTP_TEMP, sen);
|
||||||
|
hot_rawdata = sprd_thm_temp_to_rawdata(SPRD_THM_HOT_TEMP, sen);
|
||||||
|
|
||||||
|
/* Enable the sensor' overheat temperature protection interrupt */
|
||||||
|
sprd_thm_update_bits(thm->base + SPRD_THM_INT_EN,
|
||||||
|
SPRD_THM_SEN_OVERHEAT_ALARM_EN(sen->id),
|
||||||
|
SPRD_THM_SEN_OVERHEAT_ALARM_EN(sen->id));
|
||||||
|
|
||||||
|
/* Set the sensor' overheat and hot threshold temperature */
|
||||||
|
sprd_thm_update_bits(thm->base + SPRD_THM_THRES(sen->id),
|
||||||
|
SPRD_THM_THRES_MASK,
|
||||||
|
(otp_rawdata << SPRD_THM_OTP_TRIP_SHIFT) |
|
||||||
|
hot_rawdata);
|
||||||
|
|
||||||
|
/* Enable the corresponding sensor */
|
||||||
|
sprd_thm_update_bits(thm->base + SPRD_THM_CTL, SPRD_THM_SEN(sen->id),
|
||||||
|
SPRD_THM_SEN(sen->id));
|
||||||
|
}
|
||||||
|
|
||||||
|
static void sprd_thm_para_config(struct sprd_thermal_data *thm)
|
||||||
|
{
|
||||||
|
/* Set the period of two valid temperature detection action */
|
||||||
|
sprd_thm_update_bits(thm->base + SPRD_THM_DET_PERIOD,
|
||||||
|
SPRD_THM_DET_PERIOD_MASK, SPRD_THM_DET_PERIOD);
|
||||||
|
|
||||||
|
/* Set the sensors' monitor mode */
|
||||||
|
sprd_thm_update_bits(thm->base + SPRD_THM_MON_CTL,
|
||||||
|
SPRD_THM_MON_MODE_MASK, SPRD_THM_MON_MODE);
|
||||||
|
|
||||||
|
/* Set the sensors' monitor period */
|
||||||
|
sprd_thm_update_bits(thm->base + SPRD_THM_MON_PERIOD,
|
||||||
|
SPRD_THM_MON_PERIOD_MASK, SPRD_THM_MON_PERIOD);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void sprd_thm_toggle_sensor(struct sprd_thermal_sensor *sen, bool on)
|
||||||
|
{
|
||||||
|
struct thermal_zone_device *tzd = sen->tzd;
|
||||||
|
|
||||||
|
tzd->ops->set_mode(tzd,
|
||||||
|
on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int sprd_thm_probe(struct platform_device *pdev)
|
||||||
|
{
|
||||||
|
struct device_node *np = pdev->dev.of_node;
|
||||||
|
struct device_node *sen_child;
|
||||||
|
struct sprd_thermal_data *thm;
|
||||||
|
struct sprd_thermal_sensor *sen;
|
||||||
|
const struct sprd_thm_variant_data *pdata;
|
||||||
|
int ret, i;
|
||||||
|
u32 val;
|
||||||
|
|
||||||
|
pdata = of_device_get_match_data(&pdev->dev);
|
||||||
|
if (!pdata) {
|
||||||
|
dev_err(&pdev->dev, "No matching driver data found\n");
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
thm = devm_kzalloc(&pdev->dev, sizeof(*thm), GFP_KERNEL);
|
||||||
|
if (!thm)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
thm->var_data = pdata;
|
||||||
|
thm->base = devm_platform_ioremap_resource(pdev, 0);
|
||||||
|
if (!thm->base)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
thm->nr_sensors = of_get_child_count(np);
|
||||||
|
if (thm->nr_sensors == 0 || thm->nr_sensors > SPRD_THM_MAX_SENSOR) {
|
||||||
|
dev_err(&pdev->dev, "incorrect sensor count\n");
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
thm->clk = devm_clk_get(&pdev->dev, "enable");
|
||||||
|
if (IS_ERR(thm->clk)) {
|
||||||
|
dev_err(&pdev->dev, "failed to get enable clock\n");
|
||||||
|
return PTR_ERR(thm->clk);
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = clk_prepare_enable(thm->clk);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
sprd_thm_para_config(thm);
|
||||||
|
|
||||||
|
ret = sprd_thm_cal_read(np, "thm_sign_cal", &val);
|
||||||
|
if (ret)
|
||||||
|
goto disable_clk;
|
||||||
|
|
||||||
|
if (val > 0)
|
||||||
|
thm->ratio_sign = -1;
|
||||||
|
else
|
||||||
|
thm->ratio_sign = 1;
|
||||||
|
|
||||||
|
ret = sprd_thm_cal_read(np, "thm_ratio_cal", &thm->ratio_off);
|
||||||
|
if (ret)
|
||||||
|
goto disable_clk;
|
||||||
|
|
||||||
|
for_each_child_of_node(np, sen_child) {
|
||||||
|
sen = devm_kzalloc(&pdev->dev, sizeof(*sen), GFP_KERNEL);
|
||||||
|
if (!sen) {
|
||||||
|
ret = -ENOMEM;
|
||||||
|
goto disable_clk;
|
||||||
|
}
|
||||||
|
|
||||||
|
sen->data = thm;
|
||||||
|
sen->dev = &pdev->dev;
|
||||||
|
|
||||||
|
ret = of_property_read_u32(sen_child, "reg", &sen->id);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(&pdev->dev, "get sensor reg failed");
|
||||||
|
goto disable_clk;
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = sprd_thm_sensor_calibration(sen_child, thm, sen);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(&pdev->dev, "efuse cal analysis failed");
|
||||||
|
goto disable_clk;
|
||||||
|
}
|
||||||
|
|
||||||
|
sprd_thm_sensor_init(thm, sen);
|
||||||
|
|
||||||
|
sen->tzd = devm_thermal_zone_of_sensor_register(sen->dev,
|
||||||
|
sen->id,
|
||||||
|
sen,
|
||||||
|
&sprd_thm_ops);
|
||||||
|
if (IS_ERR(sen->tzd)) {
|
||||||
|
dev_err(&pdev->dev, "register thermal zone failed %d\n",
|
||||||
|
sen->id);
|
||||||
|
ret = PTR_ERR(sen->tzd);
|
||||||
|
goto disable_clk;
|
||||||
|
}
|
||||||
|
|
||||||
|
thm->sensor[sen->id] = sen;
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = sprd_thm_set_ready(thm);
|
||||||
|
if (ret)
|
||||||
|
goto disable_clk;
|
||||||
|
|
||||||
|
ret = sprd_thm_wait_temp_ready(thm);
|
||||||
|
if (ret)
|
||||||
|
goto disable_clk;
|
||||||
|
|
||||||
|
for (i = 0; i < thm->nr_sensors; i++)
|
||||||
|
sprd_thm_toggle_sensor(thm->sensor[i], true);
|
||||||
|
|
||||||
|
platform_set_drvdata(pdev, thm);
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
disable_clk:
|
||||||
|
clk_disable_unprepare(thm->clk);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef CONFIG_PM_SLEEP
|
||||||
|
static void sprd_thm_hw_suspend(struct sprd_thermal_data *thm)
|
||||||
|
{
|
||||||
|
int i;
|
||||||
|
|
||||||
|
for (i = 0; i < thm->nr_sensors; i++) {
|
||||||
|
sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
|
||||||
|
SPRD_THM_SEN(thm->sensor[i]->id), 0);
|
||||||
|
}
|
||||||
|
|
||||||
|
sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
|
||||||
|
SPRD_THM_EN, 0x0);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int sprd_thm_suspend(struct device *dev)
|
||||||
|
{
|
||||||
|
struct sprd_thermal_data *thm = dev_get_drvdata(dev);
|
||||||
|
int i;
|
||||||
|
|
||||||
|
for (i = 0; i < thm->nr_sensors; i++)
|
||||||
|
sprd_thm_toggle_sensor(thm->sensor[i], false);
|
||||||
|
|
||||||
|
sprd_thm_hw_suspend(thm);
|
||||||
|
clk_disable_unprepare(thm->clk);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int sprd_thm_hw_resume(struct sprd_thermal_data *thm)
|
||||||
|
{
|
||||||
|
int ret, i;
|
||||||
|
|
||||||
|
for (i = 0; i < thm->nr_sensors; i++) {
|
||||||
|
sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
|
||||||
|
SPRD_THM_SEN(thm->sensor[i]->id),
|
||||||
|
SPRD_THM_SEN(thm->sensor[i]->id));
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = sprd_thm_poll_ready_status(thm);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
writel(SPRD_THM_INT_CLR_MASK, thm->base + SPRD_THM_INT_CLR);
|
||||||
|
sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
|
||||||
|
SPRD_THM_EN, SPRD_THM_EN);
|
||||||
|
return sprd_thm_wait_temp_ready(thm);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int sprd_thm_resume(struct device *dev)
|
||||||
|
{
|
||||||
|
struct sprd_thermal_data *thm = dev_get_drvdata(dev);
|
||||||
|
int ret, i;
|
||||||
|
|
||||||
|
ret = clk_prepare_enable(thm->clk);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = sprd_thm_hw_resume(thm);
|
||||||
|
if (ret)
|
||||||
|
goto disable_clk;
|
||||||
|
|
||||||
|
for (i = 0; i < thm->nr_sensors; i++)
|
||||||
|
sprd_thm_toggle_sensor(thm->sensor[i], true);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
disable_clk:
|
||||||
|
clk_disable_unprepare(thm->clk);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
static int sprd_thm_remove(struct platform_device *pdev)
|
||||||
|
{
|
||||||
|
struct sprd_thermal_data *thm = platform_get_drvdata(pdev);
|
||||||
|
int i;
|
||||||
|
|
||||||
|
for (i = 0; i < thm->nr_sensors; i++) {
|
||||||
|
sprd_thm_toggle_sensor(thm->sensor[i], false);
|
||||||
|
devm_thermal_zone_of_sensor_unregister(&pdev->dev,
|
||||||
|
thm->sensor[i]->tzd);
|
||||||
|
}
|
||||||
|
|
||||||
|
clk_disable_unprepare(thm->clk);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct of_device_id sprd_thermal_of_match[] = {
|
||||||
|
{ .compatible = "sprd,ums512-thermal", .data = &ums512_data },
|
||||||
|
{ },
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct dev_pm_ops sprd_thermal_pm_ops = {
|
||||||
|
SET_SYSTEM_SLEEP_PM_OPS(sprd_thm_suspend, sprd_thm_resume)
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct platform_driver sprd_thermal_driver = {
|
||||||
|
.probe = sprd_thm_probe,
|
||||||
|
.remove = sprd_thm_remove,
|
||||||
|
.driver = {
|
||||||
|
.name = "sprd-thermal",
|
||||||
|
.pm = &sprd_thermal_pm_ops,
|
||||||
|
.of_match_table = sprd_thermal_of_match,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
module_platform_driver(sprd_thermal_driver);
|
||||||
|
|
||||||
|
MODULE_AUTHOR("Freeman Liu <freeman.liu@unisoc.com>");
|
||||||
|
MODULE_DESCRIPTION("Spreadtrum thermal driver");
|
||||||
|
MODULE_LICENSE("GPL v2");
|
||||||
Loading…
Reference in New Issue
Block a user