scripts/spelling.txt: add "aligment" pattern and fix typo instances

Fix typos and add the following to the scripts/spelling.txt:

  aligment||alignment

I did not touch the "N_BYTE_ALIGMENT" macro in
drivers/net/wireless/realtek/rtlwifi/wifi.h to avoid unpredictable
impact.

I fixed "_aligment_handler" in arch/openrisc/kernel/entry.S because
it is surrounded by #if 0 ... #endif.  It is surely safe and I
confirmed "_alignment_handler" is correct.

I also fixed the "controler" I found in the same hunk in
arch/openrisc/kernel/head.S.

Link: http://lkml.kernel.org/r/1481573103-11329-8-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Masahiro Yamada 2017-02-27 14:28:58 -08:00 committed by Linus Torvalds
parent 8ab102d60a
commit 550116d21a
13 changed files with 23 additions and 22 deletions

View File

@ -1051,9 +1051,9 @@ int arc_unwind(struct unwind_frame_info *frame)
++ptr;
}
if (cie != NULL) {
/* get code aligment factor */
/* get code alignment factor */
state.codeAlign = get_uleb128(&ptr, end);
/* get data aligment factor */
/* get data alignment factor */
state.dataAlign = get_sleb128(&ptr, end);
if (state.codeAlign == 0 || state.dataAlign == 0 || ptr >= end)
cie = NULL;

View File

@ -319,7 +319,7 @@ EXCEPTION_ENTRY(_timer_handler)
l.j _ret_from_intr
l.nop
/* ---[ 0x600: Aligment exception ]-------------------------------------- */
/* ---[ 0x600: Alignment exception ]-------------------------------------- */
EXCEPTION_ENTRY(_alignment_handler)
CLEAR_LWA_FLAG(r3)
@ -331,7 +331,7 @@ EXCEPTION_ENTRY(_alignment_handler)
l.nop
#if 0
EXCEPTION_ENTRY(_aligment_handler)
EXCEPTION_ENTRY(_alignment_handler)
// l.mfspr r2,r0,SPR_EEAR_BASE /* Load the efective addres */
l.addi r2,r4,0
// l.mfspr r5,r0,SPR_EPCR_BASE /* Load the insn address */

View File

@ -325,7 +325,7 @@ _dispatch_do_ipage_fault:
.org 0x500
EXCEPTION_HANDLE(_timer_handler)
/* ---[ 0x600: Aligment exception ]-------------------------------------- */
/* ---[ 0x600: Alignment exception ]-------------------------------------- */
.org 0x600
EXCEPTION_HANDLE(_alignment_handler)
@ -640,8 +640,8 @@ _flush_tlb:
/* ========================================[ cache ]=== */
/* aligment here so we don't change memory offsets with
* memory controler defined
/* alignment here so we don't change memory offsets with
* memory controller defined
*/
.align 0x2000

View File

@ -19,8 +19,8 @@
/* TODO
* - clean up __offset & stuff
* - change all 8192 aligment to PAGE !!!
* - recheck if all aligments are really needed
* - change all 8192 alignment to PAGE !!!
* - recheck if all alignments are really needed
*/
# define LOAD_OFFSET PAGE_OFFSET

View File

@ -188,7 +188,7 @@
#define HW_ASSISTED_I2C_STATUS_FAILURE 2
#define HW_ASSISTED_I2C_STATUS_SUCCESS 1
#pragma pack(1) // BIOS data must use byte aligment
#pragma pack(1) // BIOS data must use byte alignment
// Define offset to location of ROM header.
#define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER 0x00000048L
@ -9180,7 +9180,7 @@ typedef struct _ATOM_POWERPLAY_INFO_V3
/*********************************************************************************/
#pragma pack() // BIOS data must use byte aligment
#pragma pack() // BIOS data must use byte alignment
#pragma pack(1)
@ -9211,7 +9211,7 @@ typedef struct _ATOM_SERVICE_INFO
#pragma pack() // BIOS data must use byte aligment
#pragma pack() // BIOS data must use byte alignment
//
// AMD ACPI Table

View File

@ -60,7 +60,7 @@ render_state_get_rodata(const struct intel_engine_cs *engine)
* this is sufficient as the null state generator makes the final batch
* with two passes to build command and state separately. At this point
* the size of both are known and it compacts them by relocating the state
* right after the commands taking care of aligment so we should sufficient
* right after the commands taking care of alignment so we should sufficient
* space below them for adding new commands.
*/
#define OUT_BATCH(batch, i, val) \

View File

@ -181,7 +181,7 @@
#define HW_ASSISTED_I2C_STATUS_FAILURE 2
#define HW_ASSISTED_I2C_STATUS_SUCCESS 1
#pragma pack(1) /* BIOS data must use byte aligment */
#pragma pack(1) /* BIOS data must use byte alignment */
/* Define offset to location of ROM header. */
@ -7909,7 +7909,7 @@ typedef struct _ATOM_POWERPLAY_INFO_V3
/*********************************************************************************/
#pragma pack() // BIOS data must use byte aligment
#pragma pack() // BIOS data must use byte alignment
//
// AMD ACPI Table

View File

@ -358,7 +358,7 @@ struct fimc_pix_limit {
* @pix_limit: pixel size constraints for the scaler
* @min_inp_pixsize: minimum input pixel size
* @min_out_pixsize: minimum output pixel size
* @hor_offs_align: horizontal pixel offset aligment
* @hor_offs_align: horizontal pixel offset alignment
* @min_vsize_align: minimum vertical pixel size alignment
*/
struct fimc_variant {

View File

@ -59,13 +59,13 @@ static const struct ani_ofdm_level_entry ofdm_level_table[] = {
/*
* MRC (Maximal Ratio Combining) has always been used with multi-antenna ofdm.
* With OFDM for single stream you just add up all antenna inputs, you're
* only interested in what you get after FFT. Signal aligment is also not
* only interested in what you get after FFT. Signal alignment is also not
* required for OFDM because any phase difference adds up in the frequency
* domain.
*
* MRC requires extra work for use with CCK. You need to align the antenna
* signals from the different antenna before you can add the signals together.
* You need aligment of signals as CCK is in time domain, so addition can cancel
* You need alignment of signals as CCK is in time domain, so addition can cancel
* your signal completely if phase is 180 degrees (think of adding sine waves).
* You also need to remove noise before the addition and this is where ANI
* MRC CCK comes into play. One of the antenna inputs may be stronger but

View File

@ -455,7 +455,7 @@ static u32 _rtl92s_fill_h2c_cmd(struct sk_buff *skb, u32 h2cbufferlen,
u8 i = 0;
do {
/* 8 - Byte aligment */
/* 8 - Byte alignment */
len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8);
/* Buffer length is not enough */
@ -504,7 +504,7 @@ static u32 _rtl92s_get_h2c_cmdlen(u32 h2cbufferlen, u32 cmd_num, u32 *pcmd_len)
u8 i = 0;
do {
/* 8 - Byte aligment */
/* 8 - Byte alignment */
len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8);
/* Buffer length is not enough */

View File

@ -680,7 +680,7 @@ struct bfi_ioim_req_s {
/*
* SG elements array within the IO request must be double word
* aligned. This aligment is required to optimize SGM setup for the IO.
* aligned. This alignment is required to optimize SGM setup for the IO.
*/
struct bfi_sge_s sges[BFI_SGE_INLINE_MAX];
u8 io_timeout;

View File

@ -667,7 +667,7 @@ int xt_compat_check_entry_offsets(const void *base, const char *elems,
COMPAT_XT_ALIGN(target_offset + sizeof(struct compat_xt_standard_target)) != next_offset)
return -EINVAL;
/* compat_xt_entry match has less strict aligment requirements,
/* compat_xt_entry match has less strict alignment requirements,
* otherwise they are identical. In case of padding differences
* we need to add compat version of xt_check_entry_match.
*/

View File

@ -71,6 +71,7 @@ algoritm||algorithm
algoritms||algorithms
algorrithm||algorithm
algorritm||algorithm
aligment||alignment
allign||align
allocatrd||allocated
allocte||allocate