Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-24 13:11:40 +00:00
Code Issues Packages Projects Releases Wiki Activity

net: dsa: Centralise global and port setup code into mv88e6xxx.

Browse Source 
The port setup code in the individual drivers is identical for 6123,
6171, and 6352, and very similar in 6131. Move it all into mv88e6xxx,
using the chip families to differentiate on features.

Similarly, the global setup is also very similar. Move the majority
into mv8e6xxx.

The chips themselves fall into families. Add helpers which uses the
device IDs to determine if a device is a member of a family or not.
Add some additional device IDs to the existing list, to make these
helper functions more complete. However these IDs are not yet added to
the probe functions.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Andrew Lunn 2015-05-06 01:09:47 +02:00 committed by David S. Miller
parent 239fb791d4
commit 54d792f257
6 changed files with 486 additions and 660 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

168
drivers/net/dsa/mv88e6123_61_65.c
View File

@ -55,7 +55,10 @@ static char *mv88e6123_61_65_probe(struct device *host_dev, int sw_addr)
static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
{
int ret;
int i;
ret = mv88e6xxx_setup_global(ds);
if (ret)
return ret;
/* Disable the PHY polling unit (since there won't be any
* external PHYs to poll), don't discard packets with
@ -63,17 +66,6 @@ static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
*/
REG_WRITE(REG_GLOBAL, 0x04, 0x0000);
/* Set the default address aging time to 5 minutes, and
* enable address learn messages to be sent to all message
* ports.
*/
REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
/* Configure the priority mapping registers. */
ret = mv88e6xxx_config_prio(ds);
if (ret < 0)
return ret;
/* Configure the upstream port, and configure the upstream
* port as the port to which ingress and egress monitor frames
* are to be sent.
@ -85,157 +77,9 @@ static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
*/
REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
/* Send all frames with destination addresses matching
* 01:80:c2:00:00:2x to the CPU port.
*/
REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
/* Send all frames with destination addresses matching
* 01:80:c2:00:00:0x to the CPU port.
*/
REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
/* Disable the loopback filter, disable flow control
* messages, disable flood broadcast override, disable
* removing of provider tags, disable ATU age violation
* interrupts, disable tag flow control, force flow
* control priority to the highest, and send all special
* multicast frames to the CPU at the highest priority.
*/
REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
/* Program the DSA routing table. */
for (i = 0; i < 32; i++) {
int nexthop;
nexthop = 0x1f;
if (i != ds->index && i < ds->dst->pd->nr_chips)
nexthop = ds->pd->rtable[i] & 0x1f;
REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
}
/* Clear all trunk masks. */
for (i = 0; i < 8; i++)
REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);
/* Clear all trunk mappings. */
for (i = 0; i < 16; i++)
REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
/* Disable ingress rate limiting by resetting all ingress
* rate limit registers to their initial state.
*/
for (i = 0; i < 6; i++)
REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
/* Initialise cross-chip port VLAN table to reset defaults. */
REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
/* Clear the priority override table. */
for (i = 0; i < 16; i++)
REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
/* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
return 0;
}
static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
{
int addr = REG_PORT(p);
u16 val;
/* MAC Forcing register: don't force link, speed, duplex
* or flow control state to any particular values on physical
* ports, but force the CPU port and all DSA ports to 1000 Mb/s
* full duplex.
*/
if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
REG_WRITE(addr, 0x01, 0x003e);
else
REG_WRITE(addr, 0x01, 0x0003);
/* Do not limit the period of time that this port can be
* paused for by the remote end or the period of time that
* this port can pause the remote end.
*/
REG_WRITE(addr, 0x02, 0x0000);
/* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
* disable Header mode, enable IGMP/MLD snooping, disable VLAN
* tunneling, determine priority by looking at 802.1p and IP
* priority fields (IP prio has precedence), and set STP state
* to Forwarding.
*
* If this is the CPU link, use DSA or EDSA tagging depending
* on which tagging mode was configured.
*
* If this is a link to another switch, use DSA tagging mode.
*
* If this is the upstream port for this switch, enable
* forwarding of unknown unicasts and multicasts.
*/
val = 0x0433;
if (dsa_is_cpu_port(ds, p)) {
if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
val |= 0x3300;
else
val |= 0x0100;
}
if (ds->dsa_port_mask & (1 << p))
val |= 0x0100;
if (p == dsa_upstream_port(ds))
val |= 0x000c;
REG_WRITE(addr, 0x04, val);
/* Port Control 2: don't force a good FCS, set the maximum
* frame size to 10240 bytes, don't let the switch add or
* strip 802.1q tags, don't discard tagged or untagged frames
* on this port, do a destination address lookup on all
* received packets as usual, disable ARP mirroring and don't
* send a copy of all transmitted/received frames on this port
* to the CPU.
*/
REG_WRITE(addr, 0x08, 0x2080);
/* Egress rate control: disable egress rate control. */
REG_WRITE(addr, 0x09, 0x0001);
/* Egress rate control 2: disable egress rate control. */
REG_WRITE(addr, 0x0a, 0x0000);
/* Port Association Vector: when learning source addresses
* of packets, add the address to the address database using
* a port bitmap that has only the bit for this port set and
* the other bits clear.
*/
REG_WRITE(addr, 0x0b, 1 << p);
/* Port ATU control: disable limiting the number of address
* database entries that this port is allowed to use.
*/
REG_WRITE(addr, 0x0c, 0x0000);
/* Priority Override: disable DA, SA and VTU priority override. */
REG_WRITE(addr, 0x0d, 0x0000);
/* Port Ethertype: use the Ethertype DSA Ethertype value. */
REG_WRITE(addr, 0x0f, ETH_P_EDSA);
/* Tag Remap: use an identity 802.1p prio -> switch prio
* mapping.
*/
REG_WRITE(addr, 0x18, 0x3210);
/* Tag Remap 2: use an identity 802.1p prio -> switch prio
* mapping.
*/
REG_WRITE(addr, 0x19, 0x7654);
return mv88e6xxx_setup_port_common(ds, p);
}
static int mv88e6123_61_65_setup(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
@ -262,14 +106,12 @@ static int mv88e6123_61_65_setup(struct dsa_switch *ds)
if (ret < 0)
return ret;
/* @@@ initialise vtu and atu */
ret = mv88e6123_61_65_setup_global(ds);
if (ret < 0)
return ret;
for (i = 0; i < ps->num_ports; i++) {
ret = mv88e6123_61_65_setup_port(ds, i);
ret = mv88e6xxx_setup_port(ds, i);
if (ret < 0)
return ret;
}

149
drivers/net/dsa/mv88e6131.c
View File

@ -45,7 +45,10 @@ static char *mv88e6131_probe(struct device *host_dev, int sw_addr)
static int mv88e6131_setup_global(struct dsa_switch *ds)
{
int ret;
int i;
ret = mv88e6xxx_setup_global(ds);
if (ret)
return ret;
/* Enable the PHY polling unit, don't discard packets with
* excessive collisions, use a weighted fair queueing scheme
@ -54,17 +57,6 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
*/
REG_WRITE(REG_GLOBAL, 0x04, 0x4400);
/* Set the default address aging time to 5 minutes, and
* enable address learn messages to be sent to all message
* ports.
*/
REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
/* Configure the priority mapping registers. */
ret = mv88e6xxx_config_prio(ds);
if (ret < 0)
return ret;
/* Set the VLAN ethertype to 0x8100. */
REG_WRITE(REG_GLOBAL, 0x19, 0x8100);
@ -83,38 +75,6 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
else
REG_WRITE(REG_GLOBAL, 0x1c, 0xe000 | (ds->index & 0x1f));
/* Send all frames with destination addresses matching
* 01:80:c2:00:00:0x to the CPU port.
*/
REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
/* Ignore removed tag data on doubly tagged packets, disable
* flow control messages, force flow control priority to the
* highest, and send all special multicast frames to the CPU
* port at the highest priority.
*/
REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
/* Program the DSA routing table. */
for (i = 0; i < 32; i++) {
int nexthop;
nexthop = 0x1f;
if (ds->pd->rtable &&
i != ds->index && i < ds->dst->pd->nr_chips)
nexthop = ds->pd->rtable[i] & 0x1f;
REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
}
/* Clear all trunk masks. */
for (i = 0; i < 8; i++)
REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7ff);
/* Clear all trunk mappings. */
for (i = 0; i < 16; i++)
REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
/* Force the priority of IGMP/MLD snoop frames and ARP frames
* to the highest setting.
*/
@ -123,103 +83,6 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
return 0;
}
static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
int addr = REG_PORT(p);
u16 val;
/* MAC Forcing register: don't force link, speed, duplex
* or flow control state to any particular values on physical
* ports, but force the CPU port and all DSA ports to 1000 Mb/s
* (100 Mb/s on 6085) full duplex.
*/
if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
if (ps->id == PORT_SWITCH_ID_6085)
REG_WRITE(addr, 0x01, 0x003d); /* 100 Mb/s */
else
REG_WRITE(addr, 0x01, 0x003e); /* 1000 Mb/s */
else
REG_WRITE(addr, 0x01, 0x0003);
/* Port Control: disable Core Tag, disable Drop-on-Lock,
* transmit frames unmodified, disable Header mode,
* enable IGMP/MLD snoop, disable DoubleTag, disable VLAN
* tunneling, determine priority by looking at 802.1p and
* IP priority fields (IP prio has precedence), and set STP
* state to Forwarding.
*
* If this is the upstream port for this switch, enable
* forwarding of unknown unicasts, and enable DSA tagging
* mode.
*
* If this is the link to another switch, use DSA tagging
* mode, but do not enable forwarding of unknown unicasts.
*/
val = 0x0433;
if (p == dsa_upstream_port(ds)) {
val |= 0x0104;
/* On 6085, unknown multicast forward is controlled
* here rather than in Port Control 2 register.
*/
if (ps->id == PORT_SWITCH_ID_6085)
val |= 0x0008;
}
if (ds->dsa_port_mask & (1 << p))
val |= 0x0100;
REG_WRITE(addr, 0x04, val);
/* Port Control 2: don't force a good FCS, don't use
* VLAN-based, source address-based or destination
* address-based priority overrides, don't let the switch
* add or strip 802.1q tags, don't discard tagged or
* untagged frames on this port, do a destination address
* lookup on received packets as usual, don't send a copy
* of all transmitted/received frames on this port to the
* CPU, and configure the upstream port number.
*
* If this is the upstream port for this switch, enable
* forwarding of unknown multicast addresses.
*/
if (ps->id == PORT_SWITCH_ID_6085)
/* on 6085, bits 3:0 are reserved, bit 6 control ARP
* mirroring, and multicast forward is handled in
* Port Control register.
*/
REG_WRITE(addr, 0x08, 0x0080);
else {
val = 0x0080 | dsa_upstream_port(ds);
if (p == dsa_upstream_port(ds))
val |= 0x0040;
REG_WRITE(addr, 0x08, val);
}
/* Rate Control: disable ingress rate limiting. */
REG_WRITE(addr, 0x09, 0x0000);
/* Rate Control 2: disable egress rate limiting. */
REG_WRITE(addr, 0x0a, 0x0000);
/* Port Association Vector: when learning source addresses
* of packets, add the address to the address database using
* a port bitmap that has only the bit for this port set and
* the other bits clear.
*/
REG_WRITE(addr, 0x0b, 1 << p);
/* Tag Remap: use an identity 802.1p prio -> switch prio
* mapping.
*/
REG_WRITE(addr, 0x18, 0x3210);
/* Tag Remap 2: use an identity 802.1p prio -> switch prio
* mapping.
*/
REG_WRITE(addr, 0x19, 0x7654);
return mv88e6xxx_setup_port_common(ds, p);
}
static int mv88e6131_setup(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
@ -251,14 +114,12 @@ static int mv88e6131_setup(struct dsa_switch *ds)
if (ret < 0)
return ret;
/* @@@ initialise vtu and atu */
ret = mv88e6131_setup_global(ds);
if (ret < 0)
return ret;
for (i = 0; i < ps->num_ports; i++) {
ret = mv88e6131_setup_port(ds, i);
ret = mv88e6xxx_setup_port(ds, i);
if (ret < 0)
return ret;
}

170
drivers/net/dsa/mv88e6171.c
View File

@ -38,26 +38,17 @@ static char *mv88e6171_probe(struct device *host_dev, int sw_addr)
static int mv88e6171_setup_global(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
int ret;
int i;
ret = mv88e6xxx_setup_global(ds);
if (ret)
return ret;
/* Discard packets with excessive collisions, mask all
* interrupt sources, enable PPU.
*/
REG_WRITE(REG_GLOBAL, 0x04, 0x6000);
/* Set the default address aging time to 5 minutes, and
* enable address learn messages to be sent to all message
* ports.
*/
REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
/* Configure the priority mapping registers. */
ret = mv88e6xxx_config_prio(ds);
if (ret < 0)
return ret;
/* Configure the upstream port, and configure the upstream
* port as the port to which ingress and egress monitor frames
* are to be sent.
@ -72,158 +63,9 @@ static int mv88e6171_setup_global(struct dsa_switch *ds)
*/
REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
/* Send all frames with destination addresses matching
* 01:80:c2:00:00:2x to the CPU port.
*/
REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
/* Send all frames with destination addresses matching
* 01:80:c2:00:00:0x to the CPU port.
*/
REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
/* Disable the loopback filter, disable flow control
* messages, disable flood broadcast override, disable
* removing of provider tags, disable ATU age violation
* interrupts, disable tag flow control, force flow
* control priority to the highest, and send all special
* multicast frames to the CPU at the highest priority.
*/
REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
/* Program the DSA routing table. */
for (i = 0; i < 32; i++) {
int nexthop;
nexthop = 0x1f;
if (i != ds->index && i < ds->dst->pd->nr_chips)
nexthop = ds->pd->rtable[i] & 0x1f;
REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
}
/* Clear all trunk masks. */
for (i = 0; i < ps->num_ports; i++)
REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);
/* Clear all trunk mappings. */
for (i = 0; i < 16; i++)
REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
/* Disable ingress rate limiting by resetting all ingress
* rate limit registers to their initial state.
*/
for (i = 0; i < 6; i++)
REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
/* Initialise cross-chip port VLAN table to reset defaults. */
REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
/* Clear the priority override table. */
for (i = 0; i < 16; i++)
REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
/* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
return 0;
}
static int mv88e6171_setup_port(struct dsa_switch *ds, int p)
{
int addr = REG_PORT(p);
u16 val;
/* MAC Forcing register: don't force link, speed, duplex
* or flow control state to any particular values on physical
* ports, but force the CPU port and all DSA ports to 1000 Mb/s
* full duplex.
*/
val = REG_READ(addr, 0x01);
if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
REG_WRITE(addr, 0x01, val | 0x003e);
else
REG_WRITE(addr, 0x01, val | 0x0003);
/* Do not limit the period of time that this port can be
* paused for by the remote end or the period of time that
* this port can pause the remote end.
*/
REG_WRITE(addr, 0x02, 0x0000);
/* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
* disable Header mode, enable IGMP/MLD snooping, disable VLAN
* tunneling, determine priority by looking at 802.1p and IP
* priority fields (IP prio has precedence), and set STP state
* to Forwarding.
*
* If this is the CPU link, use DSA or EDSA tagging depending
* on which tagging mode was configured.
*
* If this is a link to another switch, use DSA tagging mode.
*
* If this is the upstream port for this switch, enable
* forwarding of unknown unicasts and multicasts.
*/
val = 0x0433;
if (dsa_is_cpu_port(ds, p)) {
if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
val |= 0x3300;
else
val |= 0x0100;
}
if (ds->dsa_port_mask & (1 << p))
val |= 0x0100;
if (p == dsa_upstream_port(ds))
val |= 0x000c;
REG_WRITE(addr, 0x04, val);
/* Port Control 2: don't force a good FCS, set the maximum
* frame size to 10240 bytes, don't let the switch add or
* strip 802.1q tags, don't discard tagged or untagged frames
* on this port, do a destination address lookup on all
* received packets as usual, disable ARP mirroring and don't
* send a copy of all transmitted/received frames on this port
* to the CPU.
*/
REG_WRITE(addr, 0x08, 0x2080);
/* Egress rate control: disable egress rate control. */
REG_WRITE(addr, 0x09, 0x0001);
/* Egress rate control 2: disable egress rate control. */
REG_WRITE(addr, 0x0a, 0x0000);
/* Port Association Vector: when learning source addresses
* of packets, add the address to the address database using
* a port bitmap that has only the bit for this port set and
* the other bits clear.
*/
REG_WRITE(addr, 0x0b, 1 << p);
/* Port ATU control: disable limiting the number of address
* database entries that this port is allowed to use.
*/
REG_WRITE(addr, 0x0c, 0x0000);
/* Priority Override: disable DA, SA and VTU priority override. */
REG_WRITE(addr, 0x0d, 0x0000);
/* Port Ethertype: use the Ethertype DSA Ethertype value. */
REG_WRITE(addr, 0x0f, ETH_P_EDSA);
/* Tag Remap: use an identity 802.1p prio -> switch prio
* mapping.
*/
REG_WRITE(addr, 0x18, 0x3210);
/* Tag Remap 2: use an identity 802.1p prio -> switch prio
* mapping.
*/
REG_WRITE(addr, 0x19, 0x7654);
return mv88e6xxx_setup_port_common(ds, p);
}
static int mv88e6171_setup(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
@ -240,8 +82,6 @@ static int mv88e6171_setup(struct dsa_switch *ds)
if (ret < 0)
return ret;
/* @@@ initialise vtu and atu */
ret = mv88e6171_setup_global(ds);
if (ret < 0)
return ret;
@ -250,7 +90,7 @@ static int mv88e6171_setup(struct dsa_switch *ds)
if (!(dsa_is_cpu_port(ds, i) || ds->phys_port_mask & (1 << i)))
continue;
ret = mv88e6171_setup_port(ds, i);
ret = mv88e6xxx_setup_port(ds, i);
if (ret < 0)
return ret;
}

168
drivers/net/dsa/mv88e6352.c
View File

@ -47,26 +47,17 @@ static char *mv88e6352_probe(struct device *host_dev, int sw_addr)
static int mv88e6352_setup_global(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
int ret;
int i;
ret = mv88e6xxx_setup_global(ds);
if (ret)
return ret;
/* Discard packets with excessive collisions,
* mask all interrupt sources, enable PPU (bit 14, undocumented).
*/
REG_WRITE(REG_GLOBAL, 0x04, 0x6000);
/* Set the default address aging time to 5 minutes, and
* enable address learn messages to be sent to all message
* ports.
*/
REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
/* Configure the priority mapping registers. */
ret = mv88e6xxx_config_prio(ds);
if (ret < 0)
return ret;
/* Configure the upstream port, and configure the upstream
* port as the port to which ingress and egress monitor frames
* are to be sent.
@ -78,156 +69,9 @@ static int mv88e6352_setup_global(struct dsa_switch *ds)
*/
REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
/* Send all frames with destination addresses matching
* 01:80:c2:00:00:2x to the CPU port.
*/
REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
/* Send all frames with destination addresses matching
* 01:80:c2:00:00:0x to the CPU port.
*/
REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
/* Disable the loopback filter, disable flow control
* messages, disable flood broadcast override, disable
* removing of provider tags, disable ATU age violation
* interrupts, disable tag flow control, force flow
* control priority to the highest, and send all special
* multicast frames to the CPU at the highest priority.
*/
REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
/* Program the DSA routing table. */
for (i = 0; i < 32; i++) {
int nexthop = 0x1f;
if (i != ds->index && i < ds->dst->pd->nr_chips)
nexthop = ds->pd->rtable[i] & 0x1f;
REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
}
/* Clear all trunk masks. */
for (i = 0; i < 8; i++)
REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7f);
/* Clear all trunk mappings. */
for (i = 0; i < 16; i++)
REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
/* Disable ingress rate limiting by resetting all ingress
* rate limit registers to their initial state.
*/
for (i = 0; i < ps->num_ports; i++)
REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
/* Initialise cross-chip port VLAN table to reset defaults. */
REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
/* Clear the priority override table. */
for (i = 0; i < 16; i++)
REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
/* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
return 0;
}
static int mv88e6352_setup_port(struct dsa_switch *ds, int p)
{
int addr = REG_PORT(p);
u16 val;
/* MAC Forcing register: don't force link, speed, duplex
* or flow control state to any particular values on physical
* ports, but force the CPU port and all DSA ports to 1000 Mb/s
* full duplex.
*/
if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
REG_WRITE(addr, 0x01, 0x003e);
else
REG_WRITE(addr, 0x01, 0x0003);
/* Do not limit the period of time that this port can be
* paused for by the remote end or the period of time that
* this port can pause the remote end.
*/
REG_WRITE(addr, 0x02, 0x0000);
/* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
* disable Header mode, enable IGMP/MLD snooping, disable VLAN
* tunneling, determine priority by looking at 802.1p and IP
* priority fields (IP prio has precedence), and set STP state
* to Forwarding.
*
* If this is the CPU link, use DSA or EDSA tagging depending
* on which tagging mode was configured.
*
* If this is a link to another switch, use DSA tagging mode.
*
* If this is the upstream port for this switch, enable
* forwarding of unknown unicasts and multicasts.
*/
val = 0x0433;
if (dsa_is_cpu_port(ds, p)) {
if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
val |= 0x3300;
else
val |= 0x0100;
}
if (ds->dsa_port_mask & (1 << p))
val |= 0x0100;
if (p == dsa_upstream_port(ds))
val |= 0x000c;
REG_WRITE(addr, 0x04, val);
/* Port Control 2: don't force a good FCS, set the maximum
* frame size to 10240 bytes, don't let the switch add or
* strip 802.1q tags, don't discard tagged or untagged frames
* on this port, do a destination address lookup on all
* received packets as usual, disable ARP mirroring and don't
* send a copy of all transmitted/received frames on this port
* to the CPU.
*/
REG_WRITE(addr, 0x08, 0x2080);
/* Egress rate control: disable egress rate control. */
REG_WRITE(addr, 0x09, 0x0001);
/* Egress rate control 2: disable egress rate control. */
REG_WRITE(addr, 0x0a, 0x0000);
/* Port Association Vector: when learning source addresses
* of packets, add the address to the address database using
* a port bitmap that has only the bit for this port set and
* the other bits clear.
*/
REG_WRITE(addr, 0x0b, 1 << p);
/* Port ATU control: disable limiting the number of address
* database entries that this port is allowed to use.
*/
REG_WRITE(addr, 0x0c, 0x0000);
/* Priority Override: disable DA, SA and VTU priority override. */
REG_WRITE(addr, 0x0d, 0x0000);
/* Port Ethertype: use the Ethertype DSA Ethertype value. */
REG_WRITE(addr, 0x0f, ETH_P_EDSA);
/* Tag Remap: use an identity 802.1p prio -> switch prio
* mapping.
*/
REG_WRITE(addr, 0x18, 0x3210);
/* Tag Remap 2: use an identity 802.1p prio -> switch prio
* mapping.
*/
REG_WRITE(addr, 0x19, 0x7654);
return mv88e6xxx_setup_port_common(ds, p);
}
#ifdef CONFIG_NET_DSA_HWMON
static int mv88e6352_get_temp(struct dsa_switch *ds, int *temp)
@ -306,14 +150,12 @@ static int mv88e6352_setup(struct dsa_switch *ds)
if (ret < 0)
return ret;
/* @@@ initialise vtu and atu */
ret = mv88e6352_setup_global(ds);
if (ret < 0)
return ret;
for (i = 0; i < ps->num_ports; i++) {
ret = mv88e6352_setup_port(ds, i);
ret = mv88e6xxx_setup_port(ds, i);
if (ret < 0)
return ret;
}

405
drivers/net/dsa/mv88e6xxx.c
View File

@ -165,24 +165,6 @@ int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
return ret;
}
int mv88e6xxx_config_prio(struct dsa_switch *ds)
{
/* Configure the IP ToS mapping registers. */
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_0, 0x0000);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_1, 0x0000);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_2, 0x5555);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_3, 0x5555);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_4, 0xaaaa);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_5, 0xaaaa);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_6, 0xffff);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_7, 0xffff);
/* Configure the IEEE 802.1p priority mapping register. */
REG_WRITE(REG_GLOBAL, GLOBAL_IEEE_PRI, 0xfa41);
return 0;
}
int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr)
{
REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, (addr[0] << 8) | addr[1]);
@ -434,14 +416,100 @@ void mv88e6xxx_poll_link(struct dsa_switch *ds)
}
}
static bool mv88e6xxx_6065_family(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
switch (ps->id) {
case PORT_SWITCH_ID_6031:
case PORT_SWITCH_ID_6061:
case PORT_SWITCH_ID_6035:
case PORT_SWITCH_ID_6065:
return true;
}
return false;
}
static bool mv88e6xxx_6095_family(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
switch (ps->id) {
case PORT_SWITCH_ID_6092:
case PORT_SWITCH_ID_6095:
return true;
}
return false;
}
static bool mv88e6xxx_6097_family(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
switch (ps->id) {
case PORT_SWITCH_ID_6046:
case PORT_SWITCH_ID_6085:
case PORT_SWITCH_ID_6096:
case PORT_SWITCH_ID_6097:
return true;
}
return false;
}
static bool mv88e6xxx_6165_family(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
switch (ps->id) {
case PORT_SWITCH_ID_6123:
case PORT_SWITCH_ID_6161:
case PORT_SWITCH_ID_6165:
return true;
}
return false;
}
static bool mv88e6xxx_6185_family(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
switch (ps->id) {
case PORT_SWITCH_ID_6121:
case PORT_SWITCH_ID_6122:
case PORT_SWITCH_ID_6152:
case PORT_SWITCH_ID_6155:
case PORT_SWITCH_ID_6182:
case PORT_SWITCH_ID_6185:
case PORT_SWITCH_ID_6108:
case PORT_SWITCH_ID_6131:
return true;
}
return false;
}
static bool mv88e6xxx_6351_family(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
switch (ps->id) {
case PORT_SWITCH_ID_6171:
case PORT_SWITCH_ID_6175:
case PORT_SWITCH_ID_6350:
case PORT_SWITCH_ID_6351:
return true;
}
return false;
}
static bool mv88e6xxx_6352_family(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
switch (ps->id) {
case PORT_SWITCH_ID_6352:
case PORT_SWITCH_ID_6172:
case PORT_SWITCH_ID_6176:
case PORT_SWITCH_ID_6240:
case PORT_SWITCH_ID_6352:
return true;
}
return false;
@ -1241,13 +1309,212 @@ static void mv88e6xxx_bridge_work(struct work_struct *work)
}
}
int mv88e6xxx_setup_port_common(struct dsa_switch *ds, int port)
int mv88e6xxx_setup_port(struct dsa_switch *ds, int port)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
int ret, fid;
u16 reg;
mutex_lock(&ps->smi_mutex);
if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
mv88e6xxx_6165_family(ds) || mv88e6xxx_6097_family(ds) ||
mv88e6xxx_6185_family(ds) || mv88e6xxx_6095_family(ds) ||
mv88e6xxx_6065_family(ds)) {
/* MAC Forcing register: don't force link, speed,
* duplex or flow control state to any particular
* values on physical ports, but force the CPU port
* and all DSA ports to their maximum bandwidth and
* full duplex.
*/
reg = _mv88e6xxx_reg_read(ds, REG_PORT(port), PORT_PCS_CTRL);
if (dsa_is_cpu_port(ds, port) ||
ds->dsa_port_mask & (1 << port)) {
reg |= PORT_PCS_CTRL_FORCE_LINK |
PORT_PCS_CTRL_LINK_UP |
PORT_PCS_CTRL_DUPLEX_FULL |
PORT_PCS_CTRL_FORCE_DUPLEX;
if (mv88e6xxx_6065_family(ds))
reg |= PORT_PCS_CTRL_100;
else
reg |= PORT_PCS_CTRL_1000;
} else {
reg |= PORT_PCS_CTRL_UNFORCED;
}
ret = _mv88e6xxx_reg_write(ds, REG_PORT(port),
PORT_PCS_CTRL, reg);
if (ret)
goto abort;
}
/* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
* disable Header mode, enable IGMP/MLD snooping, disable VLAN
* tunneling, determine priority by looking at 802.1p and IP
* priority fields (IP prio has precedence), and set STP state
* to Forwarding.
*
* If this is the CPU link, use DSA or EDSA tagging depending
* on which tagging mode was configured.
*
* If this is a link to another switch, use DSA tagging mode.
*
* If this is the upstream port for this switch, enable
* forwarding of unknown unicasts and multicasts.
*/
reg = 0;
if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
mv88e6xxx_6165_family(ds) || mv88e6xxx_6097_family(ds) ||
mv88e6xxx_6095_family(ds) || mv88e6xxx_6065_family(ds) ||
mv88e6xxx_6185_family(ds))
reg = PORT_CONTROL_IGMP_MLD_SNOOP |
PORT_CONTROL_USE_TAG | PORT_CONTROL_USE_IP |
PORT_CONTROL_STATE_FORWARDING;
if (dsa_is_cpu_port(ds, port)) {
if (mv88e6xxx_6095_family(ds) || mv88e6xxx_6185_family(ds))
reg |= PORT_CONTROL_DSA_TAG;
if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
mv88e6xxx_6165_family(ds) || mv88e6xxx_6097_family(ds)) {
if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
reg |= PORT_CONTROL_FRAME_ETHER_TYPE_DSA;
else
reg |= PORT_CONTROL_FRAME_MODE_DSA;
}
if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
mv88e6xxx_6165_family(ds) || mv88e6xxx_6097_family(ds) ||
mv88e6xxx_6095_family(ds) || mv88e6xxx_6065_family(ds) ||
mv88e6xxx_6185_family(ds)) {
if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
reg |= PORT_CONTROL_EGRESS_ADD_TAG;
}
}
if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
mv88e6xxx_6165_family(ds) || mv88e6xxx_6097_family(ds) ||
mv88e6xxx_6095_family(ds) || mv88e6xxx_6065_family(ds)) {
if (ds->dsa_port_mask & (1 << port))
reg |= PORT_CONTROL_FRAME_MODE_DSA;
if (port == dsa_upstream_port(ds))
reg |= PORT_CONTROL_FORWARD_UNKNOWN |
PORT_CONTROL_FORWARD_UNKNOWN_MC;
}
if (reg) {
ret = _mv88e6xxx_reg_write(ds, REG_PORT(port),
PORT_CONTROL, reg);
if (ret)
goto abort;
}
/* Port Control 2: don't force a good FCS, set the maximum
* frame size to 10240 bytes, don't let the switch add or
* strip 802.1q tags, don't discard tagged or untagged frames
* on this port, do a destination address lookup on all
* received packets as usual, disable ARP mirroring and don't
* send a copy of all transmitted/received frames on this port
* to the CPU.
*/
reg = 0;
if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
mv88e6xxx_6165_family(ds) || mv88e6xxx_6097_family(ds) ||
mv88e6xxx_6095_family(ds))
reg = PORT_CONTROL_2_MAP_DA;
if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
mv88e6xxx_6165_family(ds))
reg |= PORT_CONTROL_2_JUMBO_10240;
if (mv88e6xxx_6095_family(ds) || mv88e6xxx_6185_family(ds)) {
/* Set the upstream port this port should use */
reg |= dsa_upstream_port(ds);
/* enable forwarding of unknown multicast addresses to
* the upstream port
*/
if (port == dsa_upstream_port(ds))
reg |= PORT_CONTROL_2_FORWARD_UNKNOWN;
}
if (reg) {
ret = _mv88e6xxx_reg_write(ds, REG_PORT(port),
PORT_CONTROL_2, reg);
if (ret)
goto abort;
}
/* Port Association Vector: when learning source addresses
* of packets, add the address to the address database using
* a port bitmap that has only the bit for this port set and
* the other bits clear.
*/
ret = _mv88e6xxx_reg_write(ds, REG_PORT(port), PORT_ASSOC_VECTOR,
1 << port);
if (ret)
goto abort;
/* Egress rate control 2: disable egress rate control. */
ret = _mv88e6xxx_reg_write(ds, REG_PORT(port), PORT_RATE_CONTROL_2,
0x0000);
if (ret)
goto abort;
if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
mv88e6xxx_6165_family(ds) || mv88e6xxx_6097_family(ds)) {
/* Do not limit the period of time that this port can
* be paused for by the remote end or the period of
* time that this port can pause the remote end.
*/
ret = _mv88e6xxx_reg_write(ds, REG_PORT(port),
PORT_PAUSE_CTRL, 0x0000);
if (ret)
goto abort;
/* Port ATU control: disable limiting the number of
* address database entries that this port is allowed
* to use.
*/
ret = _mv88e6xxx_reg_write(ds, REG_PORT(port),
PORT_ATU_CONTROL, 0x0000);
/* Priority Override: disable DA, SA and VTU priority
* override.
*/
ret = _mv88e6xxx_reg_write(ds, REG_PORT(port),
PORT_PRI_OVERRIDE, 0x0000);
if (ret)
goto abort;
/* Port Ethertype: use the Ethertype DSA Ethertype
* value.
*/
ret = _mv88e6xxx_reg_write(ds, REG_PORT(port),
PORT_ETH_TYPE, ETH_P_EDSA);
if (ret)
goto abort;
/* Tag Remap: use an identity 802.1p prio -> switch
* prio mapping.
*/
ret = _mv88e6xxx_reg_write(ds, REG_PORT(port),
PORT_TAG_REGMAP_0123, 0x3210);
if (ret)
goto abort;
/* Tag Remap 2: use an identity 802.1p prio -> switch
* prio mapping.
*/
ret = _mv88e6xxx_reg_write(ds, REG_PORT(port),
PORT_TAG_REGMAP_4567, 0x7654);
if (ret)
goto abort;
}
if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
mv88e6xxx_6165_family(ds) || mv88e6xxx_6097_family(ds) ||
mv88e6xxx_6185_family(ds) || mv88e6xxx_6095_family(ds)) {
/* Rate Control: disable ingress rate limiting. */
ret = _mv88e6xxx_reg_write(ds, REG_PORT(port),
PORT_RATE_CONTROL, 0x0001);
if (ret)
goto abort;
}
/* Port Control 1: disable trunking, disable sending
* learning messages to this port.
*/
@ -1298,6 +1565,104 @@ int mv88e6xxx_setup_common(struct dsa_switch *ds)
return 0;
}
int mv88e6xxx_setup_global(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
int i;
/* Set the default address aging time to 5 minutes, and
* enable address learn messages to be sent to all message
* ports.
*/
REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
0x0140 | GLOBAL_ATU_CONTROL_LEARN2ALL);
/* Configure the IP ToS mapping registers. */
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_0, 0x0000);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_1, 0x0000);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_2, 0x5555);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_3, 0x5555);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_4, 0xaaaa);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_5, 0xaaaa);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_6, 0xffff);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_7, 0xffff);
/* Configure the IEEE 802.1p priority mapping register. */
REG_WRITE(REG_GLOBAL, GLOBAL_IEEE_PRI, 0xfa41);
/* Send all frames with destination addresses matching
* 01:80:c2:00:00:0x to the CPU port.
*/
REG_WRITE(REG_GLOBAL2, GLOBAL2_MGMT_EN_0X, 0xffff);
/* Ignore removed tag data on doubly tagged packets, disable
* flow control messages, force flow control priority to the
* highest, and send all special multicast frames to the CPU
* port at the highest priority.
*/
REG_WRITE(REG_GLOBAL2, GLOBAL2_SWITCH_MGMT,
0x7 | GLOBAL2_SWITCH_MGMT_RSVD2CPU | 0x70 |
GLOBAL2_SWITCH_MGMT_FORCE_FLOW_CTRL_PRI);
/* Program the DSA routing table. */
for (i = 0; i < 32; i++) {
int nexthop = 0x1f;
if (ds->pd->rtable &&
i != ds->index && i < ds->dst->pd->nr_chips)
nexthop = ds->pd->rtable[i] & 0x1f;
REG_WRITE(REG_GLOBAL2, GLOBAL2_DEVICE_MAPPING,
GLOBAL2_DEVICE_MAPPING_UPDATE |
(i << GLOBAL2_DEVICE_MAPPING_TARGET_SHIFT) |
nexthop);
}
/* Clear all trunk masks. */
for (i = 0; i < 8; i++)
REG_WRITE(REG_GLOBAL2, GLOBAL2_TRUNK_MASK,
0x8000 | (i << GLOBAL2_TRUNK_MASK_NUM_SHIFT) |
((1 << ps->num_ports) - 1));
/* Clear all trunk mappings. */
for (i = 0; i < 16; i++)
REG_WRITE(REG_GLOBAL2, GLOBAL2_TRUNK_MAPPING,
GLOBAL2_TRUNK_MAPPING_UPDATE |
(i << GLOBAL2_TRUNK_MAPPING_ID_SHIFT));
if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
mv88e6xxx_6165_family(ds) || mv88e6xxx_6097_family(ds)) {
/* Send all frames with destination addresses matching
* 01:80:c2:00:00:2x to the CPU port.
*/
REG_WRITE(REG_GLOBAL2, GLOBAL2_MGMT_EN_2X, 0xffff);
/* Initialise cross-chip port VLAN table to reset
* defaults.
*/
REG_WRITE(REG_GLOBAL2, GLOBAL2_PVT_ADDR, 0x9000);
/* Clear the priority override table. */
for (i = 0; i < 16; i++)
REG_WRITE(REG_GLOBAL2, GLOBAL2_PRIO_OVERRIDE,
0x8000 | (i << 8));
}
if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
mv88e6xxx_6165_family(ds) || mv88e6xxx_6097_family(ds) ||
mv88e6xxx_6185_family(ds) || mv88e6xxx_6095_family(ds)) {
/* Disable ingress rate limiting by resetting all
* ingress rate limit registers to their initial
* state.
*/
for (i = 0; i < ps->num_ports; i++)
REG_WRITE(REG_GLOBAL2, GLOBAL2_INGRESS_OP,
0x9000 | (i << 8));
}
return 0;
}
int mv88e6xxx_switch_reset(struct dsa_switch *ds, bool ppu_active)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);

86
drivers/net/dsa/mv88e6xxx.h
View File

@ -40,9 +40,31 @@
#define PORT_STATUS_TX_PAUSED BIT(5)
#define PORT_STATUS_FLOW_CTRL BIT(4)
#define PORT_PCS_CTRL 0x01
#define PORT_PCS_CTRL_FC BIT(7)
#define PORT_PCS_CTRL_FORCE_FC BIT(6)
#define PORT_PCS_CTRL_LINK_UP BIT(5)
#define PORT_PCS_CTRL_FORCE_LINK BIT(4)
#define PORT_PCS_CTRL_DUPLEX_FULL BIT(3)
#define PORT_PCS_CTRL_FORCE_DUPLEX BIT(2)
#define PORT_PCS_CTRL_10 0x00
#define PORT_PCS_CTRL_100 0x01
#define PORT_PCS_CTRL_1000 0x02
#define PORT_PCS_CTRL_UNFORCED 0x03
#define PORT_PAUSE_CTRL 0x02
#define PORT_SWITCH_ID 0x03
#define PORT_SWITCH_ID_6031 0x0310
#define PORT_SWITCH_ID_6035 0x0350
#define PORT_SWITCH_ID_6046 0x0480
#define PORT_SWITCH_ID_6061 0x0610
#define PORT_SWITCH_ID_6065 0x0650
#define PORT_SWITCH_ID_6085 0x04a0
#define PORT_SWITCH_ID_6092 0x0970
#define PORT_SWITCH_ID_6095 0x0950
#define PORT_SWITCH_ID_6096 0x0980
#define PORT_SWITCH_ID_6097 0x0990
#define PORT_SWITCH_ID_6108 0x1070
#define PORT_SWITCH_ID_6121 0x1040
#define PORT_SWITCH_ID_6122 0x1050
#define PORT_SWITCH_ID_6123 0x1210
#define PORT_SWITCH_ID_6123_A1 0x1212
#define PORT_SWITCH_ID_6123_A2 0x1213
@ -58,13 +80,38 @@
#define PORT_SWITCH_ID_6165_A2 0x1653
#define PORT_SWITCH_ID_6171 0x1710
#define PORT_SWITCH_ID_6172 0x1720
#define PORT_SWITCH_ID_6175 0x1750
#define PORT_SWITCH_ID_6176 0x1760
#define PORT_SWITCH_ID_6182 0x1a60
#define PORT_SWITCH_ID_6185 0x1a70
#define PORT_SWITCH_ID_6240 0x2400
#define PORT_SWITCH_ID_6320 0x1250
#define PORT_SWITCH_ID_6350 0x3710
#define PORT_SWITCH_ID_6351 0x3750
#define PORT_SWITCH_ID_6352 0x3520
#define PORT_SWITCH_ID_6352_A0 0x3521
#define PORT_SWITCH_ID_6352_A1 0x3522
#define PORT_CONTROL 0x04
#define PORT_CONTROL_USE_CORE_TAG BIT(15)
#define PORT_CONTROL_DROP_ON_LOCK BIT(14)
#define PORT_CONTROL_EGRESS_UNMODIFIED (0x0 << 12)
#define PORT_CONTROL_EGRESS_UNTAGGED (0x1 << 12)
#define PORT_CONTROL_EGRESS_TAGGED (0x2 << 12)
#define PORT_CONTROL_EGRESS_ADD_TAG (0x3 << 12)
#define PORT_CONTROL_HEADER BIT(11)
#define PORT_CONTROL_IGMP_MLD_SNOOP BIT(10)
#define PORT_CONTROL_DOUBLE_TAG BIT(9)
#define PORT_CONTROL_FRAME_MODE_NORMAL (0x0 << 8)
#define PORT_CONTROL_FRAME_MODE_DSA (0x1 << 8)
#define PORT_CONTROL_FRAME_MODE_PROVIDER (0x2 << 8)
#define PORT_CONTROL_FRAME_ETHER_TYPE_DSA (0x3 << 8)
#define PORT_CONTROL_DSA_TAG BIT(8)
#define PORT_CONTROL_VLAN_TUNNEL BIT(7)
#define PORT_CONTROL_TAG_IF_BOTH BIT(6)
#define PORT_CONTROL_USE_IP BIT(5)
#define PORT_CONTROL_USE_TAG BIT(4)
#define PORT_CONTROL_FORWARD_UNKNOWN_MC BIT(3)
#define PORT_CONTROL_FORWARD_UNKNOWN BIT(2)
#define PORT_CONTROL_STATE_MASK 0x03
#define PORT_CONTROL_STATE_DISABLED 0x00
#define PORT_CONTROL_STATE_BLOCKING 0x01
@ -74,15 +121,32 @@
#define PORT_BASE_VLAN 0x06
#define PORT_DEFAULT_VLAN 0x07
#define PORT_CONTROL_2 0x08
#define PORT_CONTROL_2_IGNORE_FCS BIT(15)
#define PORT_CONTROL_2_VTU_PRI_OVERRIDE BIT(14)
#define PORT_CONTROL_2_SA_PRIO_OVERRIDE BIT(13)
#define PORT_CONTROL_2_DA_PRIO_OVERRIDE BIT(12)
#define PORT_CONTROL_2_JUMBO_1522 (0x00 << 12)
#define PORT_CONTROL_2_JUMBO_2048 (0x01 << 12)
#define PORT_CONTROL_2_JUMBO_10240 (0x02 << 12)
#define PORT_CONTROL_2_DISCARD_TAGGED BIT(9)
#define PORT_CONTROL_2_DISCARD_UNTAGGED BIT(8)
#define PORT_CONTROL_2_MAP_DA BIT(7)
#define PORT_CONTROL_2_DEFAULT_FORWARD BIT(6)
#define PORT_CONTROL_2_FORWARD_UNKNOWN BIT(6)
#define PORT_CONTROL_2_EGRESS_MONITOR BIT(5)
#define PORT_CONTROL_2_INGRESS_MONITOR BIT(4)
#define PORT_RATE_CONTROL 0x09
#define PORT_RATE_CONTROL_2 0x0a
#define PORT_ASSOC_VECTOR 0x0b
#define PORT_ATU_CONTROL 0x0c
#define PORT_PRI_OVERRIDE 0x0d
#define PORT_ETH_TYPE 0x0f
#define PORT_IN_DISCARD_LO 0x10
#define PORT_IN_DISCARD_HI 0x11
#define PORT_IN_FILTERED 0x12
#define PORT_OUT_FILTERED 0x13
#define PORT_TAG_REGMAP_0123 0x19
#define PORT_TAG_REGMAP_4567 0x1a
#define PORT_TAG_REGMAP_0123 0x18
#define PORT_TAG_REGMAP_4567 0x19
#define REG_GLOBAL 0x1b
#define GLOBAL_STATUS 0x00
@ -102,7 +166,7 @@
#define GLOBAL_CONTROL_DISCARD_EXCESS BIT(13) /* 6352 */
#define GLOBAL_CONTROL_SCHED_PRIO BIT(11) /* 6152 */
#define GLOBAL_CONTROL_MAX_FRAME_1632 BIT(10) /* 6152 */
#define GLOBAL_CONTROL_RELOAD_EEPROM BIT(9) /* 6152 */
#define GLOBAL_CONTROL_RELOAD_EEPROM BIT(9) /* 6152 */
#define GLOBAL_CONTROL_DEVICE_EN BIT(7)
#define GLOBAL_CONTROL_STATS_DONE_EN BIT(6)
#define GLOBAL_CONTROL_VTU_PROBLEM_EN BIT(5)
@ -117,6 +181,7 @@
#define GLOBAL_VTU_DATA_4_7 0x08
#define GLOBAL_VTU_DATA_8_11 0x09
#define GLOBAL_ATU_CONTROL 0x0a
#define GLOBAL_ATU_CONTROL_LEARN2ALL BIT(3)
#define GLOBAL_ATU_OP 0x0b
#define GLOBAL_ATU_OP_BUSY BIT(15)
#define GLOBAL_ATU_OP_NOP (0 << 12)
@ -172,9 +237,20 @@
#define GLOBAL2_MGMT_EN_0X 0x03
#define GLOBAL2_FLOW_CONTROL 0x04
#define GLOBAL2_SWITCH_MGMT 0x05
#define GLOBAL2_SWITCH_MGMT_USE_DOUBLE_TAG_DATA BIT(15)
#define GLOBAL2_SWITCH_MGMT_PREVENT_LOOPS BIT(14)
#define GLOBAL2_SWITCH_MGMT_FLOW_CONTROL_MSG BIT(13)
#define GLOBAL2_SWITCH_MGMT_FORCE_FLOW_CTRL_PRI BIT(7)
#define GLOBAL2_SWITCH_MGMT_RSVD2CPU BIT(3)
#define GLOBAL2_DEVICE_MAPPING 0x06
#define GLOBAL2_DEVICE_MAPPING_UPDATE BIT(15)
#define GLOBAL2_DEVICE_MAPPING_TARGET_SHIFT 8
#define GLOBAL2_TRUNK_MASK 0x07
#define GLOBAL2_TRUNK_MASK_UPDATE BIT(15)
#define GLOBAL2_TRUNK_MASK_NUM_SHIFT 12
#define GLOBAL2_TRUNK_MAPPING 0x08
#define GLOBAL2_TRUNK_MAPPING_UPDATE BIT(15)
#define GLOBAL2_TRUNK_MAPPING_ID_SHIFT 11
#define GLOBAL2_INGRESS_OP 0x09
#define GLOBAL2_INGRESS_DATA 0x0a
#define GLOBAL2_PVT_ADDR 0x0b
@ -260,14 +336,14 @@ struct mv88e6xxx_hw_stat {
};
int mv88e6xxx_switch_reset(struct dsa_switch *ds, bool ppu_active);
int mv88e6xxx_setup_port_common(struct dsa_switch *ds, int port);
int mv88e6xxx_setup_port(struct dsa_switch *ds, int port);
int mv88e6xxx_setup_common(struct dsa_switch *ds);
int mv88e6xxx_setup_global(struct dsa_switch *ds);
int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg);
int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg);
int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
int reg, u16 val);
int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val);
int mv88e6xxx_config_prio(struct dsa_switch *ds);
int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr);
int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr);
int mv88e6xxx_phy_read(struct dsa_switch *ds, int port, int regnum);