mirror of
https://github.com/torvalds/linux.git
synced 2024-12-11 21:52:04 +00:00
can: c_can: Add d_can raminit support
Add D_CAN raminit support to C_CAN driver to enable D_CAN RAM, which holds all the message objects during transmission or receiving of data. This initialization/de-initialization should be done in synchronous with D_CAN clock. In case of AM335X-EVM (current user of D_CAN driver) message RAM is controlled through control module register for both instances. So control module register details is required to initialization or de-initialization of message RAM according to instance number. Control module memory resource is obtained from D_CAN dt node and instance number obtained from device tree aliases node. This patch was tested on AM335x-EVM along with pinctrl data addition patch, d_can dt aliases addition and control module data addition. pinctrl data addition is not added to am335x-evm.dts (only supports CPLD profile#0) because d_can1 is supported under CPLD profile#1. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> [mkl: fix instance for non DT in probe, cleaned up raminit] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This commit is contained in:
parent
03f52a0a55
commit
52cde85acc
@ -233,6 +233,12 @@ static inline void c_can_pm_runtime_put_sync(const struct c_can_priv *priv)
|
||||
pm_runtime_put_sync(priv->device);
|
||||
}
|
||||
|
||||
static inline void c_can_reset_ram(const struct c_can_priv *priv, bool enable)
|
||||
{
|
||||
if (priv->raminit)
|
||||
priv->raminit(priv, enable);
|
||||
}
|
||||
|
||||
static inline int get_tx_next_msg_obj(const struct c_can_priv *priv)
|
||||
{
|
||||
return (priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) +
|
||||
@ -1090,6 +1096,7 @@ static int c_can_open(struct net_device *dev)
|
||||
struct c_can_priv *priv = netdev_priv(dev);
|
||||
|
||||
c_can_pm_runtime_get_sync(priv);
|
||||
c_can_reset_ram(priv, true);
|
||||
|
||||
/* open the can device */
|
||||
err = open_candev(dev);
|
||||
@ -1118,6 +1125,7 @@ static int c_can_open(struct net_device *dev)
|
||||
exit_irq_fail:
|
||||
close_candev(dev);
|
||||
exit_open_fail:
|
||||
c_can_reset_ram(priv, false);
|
||||
c_can_pm_runtime_put_sync(priv);
|
||||
return err;
|
||||
}
|
||||
@ -1131,6 +1139,8 @@ static int c_can_close(struct net_device *dev)
|
||||
c_can_stop(dev);
|
||||
free_irq(dev->irq, dev);
|
||||
close_candev(dev);
|
||||
|
||||
c_can_reset_ram(priv, false);
|
||||
c_can_pm_runtime_put_sync(priv);
|
||||
|
||||
return 0;
|
||||
@ -1188,6 +1198,7 @@ int c_can_power_down(struct net_device *dev)
|
||||
|
||||
c_can_stop(dev);
|
||||
|
||||
c_can_reset_ram(priv, false);
|
||||
c_can_pm_runtime_put_sync(priv);
|
||||
|
||||
return 0;
|
||||
@ -1206,6 +1217,7 @@ int c_can_power_up(struct net_device *dev)
|
||||
WARN_ON(priv->type != BOSCH_D_CAN);
|
||||
|
||||
c_can_pm_runtime_get_sync(priv);
|
||||
c_can_reset_ram(priv, true);
|
||||
|
||||
/* Clear PDR and INIT bits */
|
||||
val = priv->read_reg(priv, C_CAN_CTRL_EX_REG);
|
||||
|
@ -169,6 +169,9 @@ struct c_can_priv {
|
||||
void *priv; /* for board-specific data */
|
||||
u16 irqstatus;
|
||||
enum c_can_dev_id type;
|
||||
u32 __iomem *raminit_ctrlreg;
|
||||
unsigned int instance;
|
||||
void (*raminit) (const struct c_can_priv *priv, bool enable);
|
||||
};
|
||||
|
||||
struct net_device *alloc_c_can_dev(void);
|
||||
|
@ -38,6 +38,8 @@
|
||||
|
||||
#include "c_can.h"
|
||||
|
||||
#define CAN_RAMINIT_START_MASK(i) (1 << (i))
|
||||
|
||||
/*
|
||||
* 16-bit c_can registers can be arranged differently in the memory
|
||||
* architecture of different implementations. For example: 16-bit
|
||||
@ -68,6 +70,18 @@ static void c_can_plat_write_reg_aligned_to_32bit(struct c_can_priv *priv,
|
||||
writew(val, priv->base + 2 * priv->regs[index]);
|
||||
}
|
||||
|
||||
static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
|
||||
{
|
||||
u32 val;
|
||||
|
||||
val = readl(priv->raminit_ctrlreg);
|
||||
if (enable)
|
||||
val |= CAN_RAMINIT_START_MASK(priv->instance);
|
||||
else
|
||||
val &= ~CAN_RAMINIT_START_MASK(priv->instance);
|
||||
writel(val, priv->raminit_ctrlreg);
|
||||
}
|
||||
|
||||
static struct platform_device_id c_can_id_table[] = {
|
||||
[BOSCH_C_CAN_PLATFORM] = {
|
||||
.name = KBUILD_MODNAME,
|
||||
@ -99,7 +113,7 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
|
||||
const struct of_device_id *match;
|
||||
const struct platform_device_id *id;
|
||||
struct pinctrl *pinctrl;
|
||||
struct resource *mem;
|
||||
struct resource *mem, *res;
|
||||
int irq;
|
||||
struct clk *clk;
|
||||
|
||||
@ -178,6 +192,18 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
|
||||
priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
|
||||
priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
|
||||
priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
|
||||
|
||||
if (pdev->dev.of_node)
|
||||
priv->instance = of_alias_get_id(pdev->dev.of_node, "d_can");
|
||||
else
|
||||
priv->instance = pdev->id;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
||||
priv->raminit_ctrlreg = devm_request_and_ioremap(&pdev->dev, res);
|
||||
if (!priv->raminit_ctrlreg || priv->instance < 0)
|
||||
dev_info(&pdev->dev, "control memory is not used for raminit\n");
|
||||
else
|
||||
priv->raminit = c_can_hw_raminit;
|
||||
break;
|
||||
default:
|
||||
ret = -EINVAL;
|
||||
|
Loading…
Reference in New Issue
Block a user