mirror of
https://github.com/torvalds/linux.git
synced 2024-12-20 10:01:56 +00:00
iwlwifi: add comments to Tx commands
Add comments to Tx commands Clean up unused definitions in iwl-3945-commands.h Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Ben Cahill
David S. Miller
parent
2054a00bb8
commit
529699815b
@ -743,36 +743,86 @@ struct iwl4965_rx_mpdu_res_start {
|
||||
* (5)
|
||||
* Tx Commands & Responses:
|
||||
*
|
||||
* Driver must place each REPLY_TX command into one of the prioritized Tx
|
||||
* queues in host DRAM, shared between driver and device. When the device's
|
||||
* Tx scheduler and uCode are preparing to transmit, the device pulls the
|
||||
* Tx command over the PCI bus via one of the device's Tx DMA channels,
|
||||
* to fill an internal FIFO from which data will be transmitted.
|
||||
*
|
||||
* uCode handles all timing and protocol related to control frames
|
||||
* (RTS/CTS/ACK), based on flags in the Tx command.
|
||||
*
|
||||
* uCode handles retrying Tx when an ACK is expected but not received.
|
||||
* This includes trying lower data rates than the one requested in the Tx
|
||||
* command, as set up by the REPLY_RATE_SCALE (for 3945) or
|
||||
* REPLY_TX_LINK_QUALITY_CMD (4965).
|
||||
*
|
||||
* Driver sets up transmit power for various rates via REPLY_TX_PWR_TABLE_CMD.
|
||||
* This command must be executed after every RXON command, before Tx can occur.
|
||||
*****************************************************************************/
|
||||
|
||||
/* Tx flags */
|
||||
/* REPLY_TX Tx flags field */
|
||||
|
||||
/* 1: Use Request-To-Send protocol before this frame.
|
||||
* Mutually exclusive vs. TX_CMD_FLG_CTS_MSK. */
|
||||
#define TX_CMD_FLG_RTS_MSK __constant_cpu_to_le32(1 << 1)
|
||||
|
||||
/* 1: Transmit Clear-To-Send to self before this frame.
|
||||
* Driver should set this for AUTH/DEAUTH/ASSOC-REQ/REASSOC mgmnt frames.
|
||||
* Mutually exclusive vs. TX_CMD_FLG_RTS_MSK. */
|
||||
#define TX_CMD_FLG_CTS_MSK __constant_cpu_to_le32(1 << 2)
|
||||
|
||||
/* 1: Expect ACK from receiving station
|
||||
* 0: Don't expect ACK (MAC header's duration field s/b 0)
|
||||
* Set this for unicast frames, but not broadcast/multicast. */
|
||||
#define TX_CMD_FLG_ACK_MSK __constant_cpu_to_le32(1 << 3)
|
||||
|
||||
/* 1: Use rate scale table (see REPLY_TX_LINK_QUALITY_CMD).
|
||||
* Tx command's initial_rate_index indicates first rate to try;
|
||||
* uCode walks through table for additional Tx attempts.
|
||||
* 0: Use Tx rate/MCS from Tx command's rate_n_flags field.
|
||||
* This rate will be used for all Tx attempts; it will not be scaled. */
|
||||
#define TX_CMD_FLG_STA_RATE_MSK __constant_cpu_to_le32(1 << 4)
|
||||
|
||||
/* 1: Expect immediate block-ack.
|
||||
* Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */
|
||||
#define TX_CMD_FLG_IMM_BA_RSP_MASK __constant_cpu_to_le32(1 << 6)
|
||||
|
||||
/* 1: Frame requires full Tx-Op protection.
|
||||
* Set this if either RTS or CTS Tx Flag gets set. */
|
||||
#define TX_CMD_FLG_FULL_TXOP_PROT_MSK __constant_cpu_to_le32(1 << 7)
|
||||
|
||||
/* Tx antenna selection field; used only for 3945, reserved (0) for 4965.
|
||||
* Set field to "0" to allow 3945 uCode to select antenna (normal usage). */
|
||||
#define TX_CMD_FLG_ANT_SEL_MSK __constant_cpu_to_le32(0xf00)
|
||||
#define TX_CMD_FLG_ANT_A_MSK __constant_cpu_to_le32(1 << 8)
|
||||
#define TX_CMD_FLG_ANT_B_MSK __constant_cpu_to_le32(1 << 9)
|
||||
|
||||
/* ucode ignores BT priority for this frame */
|
||||
/* 1: Ignore Bluetooth priority for this frame.
|
||||
* 0: Delay Tx until Bluetooth device is done (normal usage). */
|
||||
#define TX_CMD_FLG_BT_DIS_MSK __constant_cpu_to_le32(1 << 12)
|
||||
|
||||
/* ucode overrides sequence control */
|
||||
/* 1: uCode overrides sequence control field in MAC header.
|
||||
* 0: Driver provides sequence control field in MAC header.
|
||||
* Set this for management frames, non-QOS data frames, non-unicast frames,
|
||||
* and also in Tx command embedded in REPLY_SCAN_CMD for active scans. */
|
||||
#define TX_CMD_FLG_SEQ_CTL_MSK __constant_cpu_to_le32(1 << 13)
|
||||
|
||||
/* signal that this frame is non-last MPDU */
|
||||
/* 1: This frame is non-last MPDU; more fragments are coming.
|
||||
* 0: Last fragment, or not using fragmentation. */
|
||||
#define TX_CMD_FLG_MORE_FRAG_MSK __constant_cpu_to_le32(1 << 14)
|
||||
|
||||
/* calculate TSF in outgoing frame */
|
||||
/* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame.
|
||||
* 0: No TSF required in outgoing frame.
|
||||
* Set this for transmitting beacons and probe responses. */
|
||||
#define TX_CMD_FLG_TSF_MSK __constant_cpu_to_le32(1 << 16)
|
||||
|
||||
/* activate TX calibration. */
|
||||
#define TX_CMD_FLG_CALIB_MSK __constant_cpu_to_le32(1 << 17)
|
||||
|
||||
/* signals that 2 bytes pad was inserted
|
||||
after the MAC header */
|
||||
/* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword
|
||||
* alignment of frame's payload data field.
|
||||
* 0: No pad
|
||||
* Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4
|
||||
* field (but not both). Driver must align frame data (i.e. data following
|
||||
* MAC header) to DWORD boundary. */
|
||||
#define TX_CMD_FLG_MH_PAD_MSK __constant_cpu_to_le32(1 << 20)
|
||||
|
||||
/* HCCA-AP - disable duration overwriting. */
|
||||
@ -788,24 +838,34 @@ struct iwl4965_rx_mpdu_res_start {
|
||||
#define TX_CMD_SEC_SHIFT 6
|
||||
#define TX_CMD_SEC_KEY128 0x08
|
||||
|
||||
/*
|
||||
* TX command Frame life time
|
||||
*/
|
||||
|
||||
struct iwl3945_dram_scratch {
|
||||
u8 try_cnt;
|
||||
u8 bt_kill_cnt;
|
||||
__le16 reserved;
|
||||
} __attribute__ ((packed));
|
||||
|
||||
/*
|
||||
* REPLY_TX = 0x1c (command)
|
||||
*/
|
||||
struct iwl3945_tx_cmd {
|
||||
/*
|
||||
* MPDU byte count:
|
||||
* MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size,
|
||||
* + 8 byte IV for CCM or TKIP (not used for WEP)
|
||||
* + Data payload
|
||||
* + 8-byte MIC (not used for CCM/WEP)
|
||||
* NOTE: Does not include Tx command bytes, post-MAC pad bytes,
|
||||
* MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i
|
||||
* Range: 14-2342 bytes.
|
||||
*/
|
||||
__le16 len;
|
||||
|
||||
/*
|
||||
* MPDU or MSDU byte count for next frame.
|
||||
* Used for fragmentation and bursting, but not 11n aggregation.
|
||||
* Same as "len", but for next frame. Set to 0 if not applicable.
|
||||
*/
|
||||
__le16 next_frame_len;
|
||||
__le32 tx_flags;
|
||||
|
||||
__le32 tx_flags; /* TX_CMD_FLG_* */
|
||||
|
||||
u8 rate;
|
||||
|
||||
/* Index of recipient station in uCode's station table */
|
||||
u8 sta_id;
|
||||
u8 tid_tspec;
|
||||
u8 sec_ctl;
|
||||
@ -827,7 +887,17 @@ struct iwl3945_tx_cmd {
|
||||
__le16 pm_frame_timeout;
|
||||
__le16 attempt_duration;
|
||||
} timeout;
|
||||
|
||||
/*
|
||||
* Duration of EDCA burst Tx Opportunity, in 32-usec units.
|
||||
* Set this if txop time is not specified by HCCA protocol (e.g. by AP).
|
||||
*/
|
||||
__le16 driver_txop;
|
||||
|
||||
/*
|
||||
* MAC header goes here, followed by 2 bytes padding if MAC header
|
||||
* length is 26 or 30 bytes, followed by payload data
|
||||
*/
|
||||
u8 payload[0];
|
||||
struct ieee80211_hdr hdr[0];
|
||||
} __attribute__ ((packed));
|
||||
@ -899,37 +969,6 @@ enum {
|
||||
TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */
|
||||
};
|
||||
|
||||
/* *******************************
|
||||
* TX aggregation state
|
||||
******************************* */
|
||||
|
||||
enum {
|
||||
AGG_TX_STATE_TRANSMITTED = 0x00,
|
||||
AGG_TX_STATE_UNDERRUN_MSK = 0x01,
|
||||
AGG_TX_STATE_BT_PRIO_MSK = 0x02,
|
||||
AGG_TX_STATE_FEW_BYTES_MSK = 0x04,
|
||||
AGG_TX_STATE_ABORT_MSK = 0x08,
|
||||
AGG_TX_STATE_LAST_SENT_TTL_MSK = 0x10,
|
||||
AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK = 0x20,
|
||||
AGG_TX_STATE_LAST_SENT_BT_KILL_MSK = 0x40,
|
||||
AGG_TX_STATE_SCD_QUERY_MSK = 0x80,
|
||||
AGG_TX_STATE_TEST_BAD_CRC32_MSK = 0x100,
|
||||
AGG_TX_STATE_RESPONSE_MSK = 0x1ff,
|
||||
AGG_TX_STATE_DUMP_TX_MSK = 0x200,
|
||||
AGG_TX_STATE_DELAY_TX_MSK = 0x400
|
||||
};
|
||||
|
||||
#define AGG_TX_STATE_LAST_SENT_MSK \
|
||||
(AGG_TX_STATE_LAST_SENT_TTL_MSK | \
|
||||
AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK | \
|
||||
AGG_TX_STATE_LAST_SENT_BT_KILL_MSK)
|
||||
|
||||
#define AGG_TX_STATE_TRY_CNT_POS 12
|
||||
#define AGG_TX_STATE_TRY_CNT_MSK 0xf000
|
||||
|
||||
#define AGG_TX_STATE_SEQ_NUM_POS 16
|
||||
#define AGG_TX_STATE_SEQ_NUM_MSK 0xffff0000
|
||||
|
||||
/*
|
||||
* REPLY_TX = 0x1c (response)
|
||||
*/
|
||||
@ -939,23 +978,7 @@ struct iwl3945_tx_resp {
|
||||
u8 bt_kill_count;
|
||||
u8 rate;
|
||||
__le32 wireless_media_time;
|
||||
__le32 status; /* TX status (for aggregation status of 1st frame) */
|
||||
} __attribute__ ((packed));
|
||||
|
||||
/*
|
||||
* REPLY_COMPRESSED_BA = 0xc5 (response only, not a command)
|
||||
*/
|
||||
struct iwl3945_compressed_ba_resp {
|
||||
__le32 sta_addr_lo32;
|
||||
__le16 sta_addr_hi16;
|
||||
__le16 reserved;
|
||||
u8 sta_id;
|
||||
u8 tid;
|
||||
__le16 ba_seq_ctl;
|
||||
__le32 ba_bitmap0;
|
||||
__le32 ba_bitmap1;
|
||||
__le16 scd_flow;
|
||||
__le16 scd_ssn;
|
||||
__le32 status; /* TX status */
|
||||
} __attribute__ ((packed));
|
||||
|
||||
/*
|
||||
|
||||
@ -937,8 +937,8 @@ struct iwl4965_rx_phy_res {
|
||||
__le16 channel; /* channel number */
|
||||
__le16 non_cfg_phy[RX_RES_PHY_CNT]; /* upto 14 phy entries */
|
||||
__le32 reserved2;
|
||||
__le32 rate_n_flags;
|
||||
__le16 byte_count; /* frame's byte-count */
|
||||
__le32 rate_n_flags; /* RATE_MCS_* */
|
||||
__le16 byte_count; /* frame's byte-count */
|
||||
__le16 reserved3;
|
||||
} __attribute__ ((packed));
|
||||
|
||||
@ -952,41 +952,96 @@ struct iwl4965_rx_mpdu_res_start {
|
||||
* (5)
|
||||
* Tx Commands & Responses:
|
||||
*
|
||||
* Driver must place each REPLY_TX command into one of the prioritized Tx
|
||||
* queues in host DRAM, shared between driver and device (see comments for
|
||||
* SCD registers and Tx/Rx Queues). When the device's Tx scheduler and uCode
|
||||
* are preparing to transmit, the device pulls the Tx command over the PCI
|
||||
* bus via one of the device's Tx DMA channels, to fill an internal FIFO
|
||||
* from which data will be transmitted.
|
||||
*
|
||||
* uCode handles all timing and protocol related to control frames
|
||||
* (RTS/CTS/ACK), based on flags in the Tx command. uCode and Tx scheduler
|
||||
* handle reception of block-acks; uCode updates the host driver via
|
||||
* REPLY_COMPRESSED_BA (4965).
|
||||
*
|
||||
* uCode handles retrying Tx when an ACK is expected but not received.
|
||||
* This includes trying lower data rates than the one requested in the Tx
|
||||
* command, as set up by the REPLY_RATE_SCALE (for 3945) or
|
||||
* REPLY_TX_LINK_QUALITY_CMD (4965).
|
||||
*
|
||||
* Driver sets up transmit power for various rates via REPLY_TX_PWR_TABLE_CMD.
|
||||
* This command must be executed after every RXON command, before Tx can occur.
|
||||
*****************************************************************************/
|
||||
|
||||
/* Tx flags */
|
||||
/* REPLY_TX Tx flags field */
|
||||
|
||||
/* 1: Use Request-To-Send protocol before this frame.
|
||||
* Mutually exclusive vs. TX_CMD_FLG_CTS_MSK. */
|
||||
#define TX_CMD_FLG_RTS_MSK __constant_cpu_to_le32(1 << 1)
|
||||
|
||||
/* 1: Transmit Clear-To-Send to self before this frame.
|
||||
* Driver should set this for AUTH/DEAUTH/ASSOC-REQ/REASSOC mgmnt frames.
|
||||
* Mutually exclusive vs. TX_CMD_FLG_RTS_MSK. */
|
||||
#define TX_CMD_FLG_CTS_MSK __constant_cpu_to_le32(1 << 2)
|
||||
|
||||
/* 1: Expect ACK from receiving station
|
||||
* 0: Don't expect ACK (MAC header's duration field s/b 0)
|
||||
* Set this for unicast frames, but not broadcast/multicast. */
|
||||
#define TX_CMD_FLG_ACK_MSK __constant_cpu_to_le32(1 << 3)
|
||||
|
||||
/* For 4965:
|
||||
* 1: Use rate scale table (see REPLY_TX_LINK_QUALITY_CMD).
|
||||
* Tx command's initial_rate_index indicates first rate to try;
|
||||
* uCode walks through table for additional Tx attempts.
|
||||
* 0: Use Tx rate/MCS from Tx command's rate_n_flags field.
|
||||
* This rate will be used for all Tx attempts; it will not be scaled. */
|
||||
#define TX_CMD_FLG_STA_RATE_MSK __constant_cpu_to_le32(1 << 4)
|
||||
|
||||
/* 1: Expect immediate block-ack.
|
||||
* Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */
|
||||
#define TX_CMD_FLG_IMM_BA_RSP_MASK __constant_cpu_to_le32(1 << 6)
|
||||
|
||||
/* 1: Frame requires full Tx-Op protection.
|
||||
* Set this if either RTS or CTS Tx Flag gets set. */
|
||||
#define TX_CMD_FLG_FULL_TXOP_PROT_MSK __constant_cpu_to_le32(1 << 7)
|
||||
|
||||
/* Tx antenna selection field; used only for 3945, reserved (0) for 4965.
|
||||
* Set field to "0" to allow 3945 uCode to select antenna (normal usage). */
|
||||
#define TX_CMD_FLG_ANT_SEL_MSK __constant_cpu_to_le32(0xf00)
|
||||
#define TX_CMD_FLG_ANT_A_MSK __constant_cpu_to_le32(1 << 8)
|
||||
#define TX_CMD_FLG_ANT_B_MSK __constant_cpu_to_le32(1 << 9)
|
||||
|
||||
/* ucode ignores BT priority for this frame */
|
||||
/* 1: Ignore Bluetooth priority for this frame.
|
||||
* 0: Delay Tx until Bluetooth device is done (normal usage). */
|
||||
#define TX_CMD_FLG_BT_DIS_MSK __constant_cpu_to_le32(1 << 12)
|
||||
|
||||
/* ucode overrides sequence control */
|
||||
/* 1: uCode overrides sequence control field in MAC header.
|
||||
* 0: Driver provides sequence control field in MAC header.
|
||||
* Set this for management frames, non-QOS data frames, non-unicast frames,
|
||||
* and also in Tx command embedded in REPLY_SCAN_CMD for active scans. */
|
||||
#define TX_CMD_FLG_SEQ_CTL_MSK __constant_cpu_to_le32(1 << 13)
|
||||
|
||||
/* signal that this frame is non-last MPDU */
|
||||
/* 1: This frame is non-last MPDU; more fragments are coming.
|
||||
* 0: Last fragment, or not using fragmentation. */
|
||||
#define TX_CMD_FLG_MORE_FRAG_MSK __constant_cpu_to_le32(1 << 14)
|
||||
|
||||
/* calculate TSF in outgoing frame */
|
||||
/* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame.
|
||||
* 0: No TSF required in outgoing frame.
|
||||
* Set this for transmitting beacons and probe responses. */
|
||||
#define TX_CMD_FLG_TSF_MSK __constant_cpu_to_le32(1 << 16)
|
||||
|
||||
/* activate TX calibration. */
|
||||
#define TX_CMD_FLG_CALIB_MSK __constant_cpu_to_le32(1 << 17)
|
||||
|
||||
/* signals that 2 bytes pad was inserted
|
||||
after the MAC header */
|
||||
/* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword
|
||||
* alignment of frame's payload data field.
|
||||
* 0: No pad
|
||||
* Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4
|
||||
* field (but not both). Driver must align frame data (i.e. data following
|
||||
* MAC header) to DWORD boundary. */
|
||||
#define TX_CMD_FLG_MH_PAD_MSK __constant_cpu_to_le32(1 << 20)
|
||||
|
||||
/* HCCA-AP - disable duration overwriting. */
|
||||
#define TX_CMD_FLG_DUR_MSK __constant_cpu_to_le32(1 << 25)
|
||||
|
||||
|
||||
/*
|
||||
* TX command security control
|
||||
*/
|
||||
@ -998,12 +1053,13 @@ struct iwl4965_rx_mpdu_res_start {
|
||||
#define TX_CMD_SEC_KEY128 0x08
|
||||
|
||||
/*
|
||||
* TX command Frame life time
|
||||
* 4965 uCode updates these Tx attempt count values in host DRAM.
|
||||
* Used for managing Tx retries when expecting block-acks.
|
||||
* Driver should set these fields to 0.
|
||||
*/
|
||||
|
||||
struct iwl4965_dram_scratch {
|
||||
u8 try_cnt;
|
||||
u8 bt_kill_cnt;
|
||||
u8 try_cnt; /* Tx attempts */
|
||||
u8 bt_kill_cnt; /* Tx attempts blocked by Bluetooth device */
|
||||
__le16 reserved;
|
||||
} __attribute__ ((packed));
|
||||
|
||||
@ -1011,13 +1067,47 @@ struct iwl4965_dram_scratch {
|
||||
* REPLY_TX = 0x1c (command)
|
||||
*/
|
||||
struct iwl4965_tx_cmd {
|
||||
/*
|
||||
* MPDU byte count:
|
||||
* MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size,
|
||||
* + 8 byte IV for CCM or TKIP (not used for WEP)
|
||||
* + Data payload
|
||||
* + 8-byte MIC (not used for CCM/WEP)
|
||||
* NOTE: Does not include Tx command bytes, post-MAC pad bytes,
|
||||
* MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i
|
||||
* Range: 14-2342 bytes.
|
||||
*/
|
||||
__le16 len;
|
||||
|
||||
/*
|
||||
* MPDU or MSDU byte count for next frame.
|
||||
* Used for fragmentation and bursting, but not 11n aggregation.
|
||||
* Same as "len", but for next frame. Set to 0 if not applicable.
|
||||
*/
|
||||
__le16 next_frame_len;
|
||||
__le32 tx_flags;
|
||||
|
||||
__le32 tx_flags; /* TX_CMD_FLG_* */
|
||||
|
||||
/* 4965's uCode may modify this field of the Tx command (in host DRAM!).
|
||||
* Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */
|
||||
struct iwl4965_dram_scratch scratch;
|
||||
__le32 rate_n_flags;
|
||||
|
||||
/* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */
|
||||
__le32 rate_n_flags; /* RATE_MCS_* */
|
||||
|
||||
/* Index of destination station in uCode's station table */
|
||||
u8 sta_id;
|
||||
u8 sec_ctl;
|
||||
|
||||
/* Type of security encryption: CCM or TKIP */
|
||||
u8 sec_ctl; /* TX_CMD_SEC_* */
|
||||
|
||||
/*
|
||||
* Index into rate table (see REPLY_TX_LINK_QUALITY_CMD) for initial
|
||||
* Tx attempt, if TX_CMD_FLG_STA_RATE_MSK is set. Normally "0" for
|
||||
* data frames, this field may be used to selectively reduce initial
|
||||
* rate (via non-0 value) for special frames (e.g. management), while
|
||||
* still supporting rate scaling for all frames.
|
||||
*/
|
||||
u8 initial_rate_index;
|
||||
u8 reserved;
|
||||
u8 key[16];
|
||||
@ -1027,8 +1117,12 @@ struct iwl4965_tx_cmd {
|
||||
__le32 life_time;
|
||||
__le32 attempt;
|
||||
} stop_time;
|
||||
|
||||
/* Host DRAM physical address pointer to "scratch" in this command.
|
||||
* Must be dword aligned. "0" in dram_lsb_ptr disables usage. */
|
||||
__le32 dram_lsb_ptr;
|
||||
u8 dram_msb_ptr;
|
||||
|
||||
u8 rts_retry_limit; /*byte 50 */
|
||||
u8 data_retry_limit; /*byte 51 */
|
||||
u8 tid_tspec;
|
||||
@ -1036,7 +1130,17 @@ struct iwl4965_tx_cmd {
|
||||
__le16 pm_frame_timeout;
|
||||
__le16 attempt_duration;
|
||||
} timeout;
|
||||
|
||||
/*
|
||||
* Duration of EDCA burst Tx Opportunity, in 32-usec units.
|
||||
* Set this if txop time is not specified by HCCA protocol (e.g. by AP).
|
||||
*/
|
||||
__le16 driver_txop;
|
||||
|
||||
/*
|
||||
* MAC header goes here, followed by 2 bytes padding if MAC header
|
||||
* length is 26 or 30 bytes, followed by payload data
|
||||
*/
|
||||
u8 payload[0];
|
||||
struct ieee80211_hdr hdr[0];
|
||||
} __attribute__ ((packed));
|
||||
@ -1109,7 +1213,7 @@ enum {
|
||||
};
|
||||
|
||||
/* *******************************
|
||||
* TX aggregation state
|
||||
* TX aggregation status
|
||||
******************************* */
|
||||
|
||||
enum {
|
||||
@ -1133,35 +1237,80 @@ enum {
|
||||
AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK | \
|
||||
AGG_TX_STATE_LAST_SENT_BT_KILL_MSK)
|
||||
|
||||
/* # tx attempts for first frame in aggregation */
|
||||
#define AGG_TX_STATE_TRY_CNT_POS 12
|
||||
#define AGG_TX_STATE_TRY_CNT_MSK 0xf000
|
||||
|
||||
/* Command ID and sequence number of Tx command for this frame */
|
||||
#define AGG_TX_STATE_SEQ_NUM_POS 16
|
||||
#define AGG_TX_STATE_SEQ_NUM_MSK 0xffff0000
|
||||
|
||||
/*
|
||||
* REPLY_TX = 0x1c (response)
|
||||
*
|
||||
* This response may be in one of two slightly different formats, indicated
|
||||
* by the frame_count field:
|
||||
*
|
||||
* 1) No aggregation (frame_count == 1). This reports Tx results for
|
||||
* a single frame. Multiple attempts, at various bit rates, may have
|
||||
* been made for this frame.
|
||||
*
|
||||
* 2) Aggregation (frame_count > 1). This reports Tx results for
|
||||
* 2 or more frames that used block-acknowledge. All frames were
|
||||
* transmitted at same rate. Rate scaling may have been used if first
|
||||
* frame in this new agg block failed in previous agg block(s).
|
||||
*
|
||||
* Note that, for aggregation, ACK (block-ack) status is not delivered here;
|
||||
* block-ack has not been received by the time the 4965 records this status.
|
||||
* This status relates to reasons the tx might have been blocked or aborted
|
||||
* within the sending station (this 4965), rather than whether it was
|
||||
* received successfully by the destination station.
|
||||
*/
|
||||
struct iwl4965_tx_resp {
|
||||
u8 frame_count; /* 1 no aggregation, >1 aggregation */
|
||||
u8 bt_kill_count;
|
||||
u8 failure_rts;
|
||||
u8 failure_frame;
|
||||
__le32 rate_n_flags;
|
||||
__le16 wireless_media_time;
|
||||
u8 bt_kill_count; /* # blocked by bluetooth (unused for agg) */
|
||||
u8 failure_rts; /* # failures due to unsuccessful RTS */
|
||||
u8 failure_frame; /* # failures due to no ACK (unused for agg) */
|
||||
|
||||
/* For non-agg: Rate at which frame was successful.
|
||||
* For agg: Rate at which all frames were transmitted. */
|
||||
__le32 rate_n_flags; /* RATE_MCS_* */
|
||||
|
||||
/* For non-agg: RTS + CTS + frame tx attempts time + ACK.
|
||||
* For agg: RTS + CTS + aggregation tx time + block-ack time. */
|
||||
__le16 wireless_media_time; /* uSecs */
|
||||
|
||||
__le16 reserved;
|
||||
__le32 pa_power1;
|
||||
__le32 pa_power1; /* RF power amplifier measurement (not used) */
|
||||
__le32 pa_power2;
|
||||
|
||||
/*
|
||||
* For non-agg: frame status TX_STATUS_*
|
||||
* For agg: status of 1st frame, AGG_TX_STATE_*; other frame status
|
||||
* fields follow this one, up to frame_count.
|
||||
* Bit fields:
|
||||
* 11- 0: AGG_TX_STATE_* status code
|
||||
* 15-12: Retry count for 1st frame in aggregation (retries
|
||||
* occur if tx failed for this frame when it was a
|
||||
* member of a previous aggregation block). If rate
|
||||
* scaling is used, retry count indicates the rate
|
||||
* table entry used for all frames in the new agg.
|
||||
* 31-16: Sequence # for this frame's Tx cmd (not SSN!)
|
||||
*/
|
||||
__le32 status; /* TX status (for aggregation status of 1st frame) */
|
||||
} __attribute__ ((packed));
|
||||
|
||||
/*
|
||||
* REPLY_COMPRESSED_BA = 0xc5 (response only, not a command)
|
||||
*
|
||||
* Reports Block-Acknowledge from recipient station
|
||||
*/
|
||||
struct iwl4965_compressed_ba_resp {
|
||||
__le32 sta_addr_lo32;
|
||||
__le16 sta_addr_hi16;
|
||||
__le16 reserved;
|
||||
|
||||
/* Index of recipient (BA-sending) station in uCode's station table */
|
||||
u8 sta_id;
|
||||
u8 tid;
|
||||
__le16 ba_seq_ctl;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user