From e3cc067b0a79d3a3672bfe7cfba12f2e8ae56039 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 18 Sep 2009 16:31:22 -0700
Subject: [PATCH 0001/1066] xen/evtchn: track enabled state for each port

enable/disable_irq() complain if the enables/disables are unbalanced,
so keep track of the state and avoid redundant enables.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/evtchn.c | 71 ++++++++++++++++++++++++++++++++++----------
 1 file changed, 56 insertions(+), 15 deletions(-)

diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
index af031950f9b1..4356a9a030df 100644
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -69,10 +69,36 @@ struct per_user_data {
 	const char *name;
 };
 
-/* Who's bound to each port? */
-static struct per_user_data *port_user[NR_EVENT_CHANNELS];
+/*
+ * Who's bound to each port?  This is logically an array of struct
+ * per_user_data *, but we encode the current enabled-state in bit 0.
+ */
+static unsigned long port_user[NR_EVENT_CHANNELS];
 static DEFINE_SPINLOCK(port_user_lock); /* protects port_user[] and ring_prod */
 
+static inline struct per_user_data *get_port_user(unsigned port)
+{
+	return (struct per_user_data *)(port_user[port] & ~1);
+}
+
+static inline void set_port_user(unsigned port, struct per_user_data *u)
+{
+	port_user[port] = (unsigned long)u;
+}
+
+static inline bool get_port_enabled(unsigned port)
+{
+	return port_user[port] & 1;
+}
+
+static inline void set_port_enabled(unsigned port, bool enabled)
+{
+	if (enabled)
+		port_user[port] |= 1;
+	else
+		port_user[port] &= ~1;
+}
+
 irqreturn_t evtchn_interrupt(int irq, void *data)
 {
 	unsigned int port = (unsigned long)data;
@@ -80,9 +106,15 @@ irqreturn_t evtchn_interrupt(int irq, void *data)
 
 	spin_lock(&port_user_lock);
 
-	u = port_user[port];
+	u = get_port_user(port);
+
+	if (WARN(!get_port_enabled(port),
+		 "Interrupt for port %d, but apparently not enabled; per-user %p\n",
+		 port, u))
+		goto out;
 
 	disable_irq_nosync(irq);
+	set_port_enabled(port, false);
 
 	if ((u->ring_prod - u->ring_cons) < EVTCHN_RING_SIZE) {
 		u->ring[EVTCHN_RING_MASK(u->ring_prod)] = port;
@@ -92,10 +124,10 @@ irqreturn_t evtchn_interrupt(int irq, void *data)
 			kill_fasync(&u->evtchn_async_queue,
 				    SIGIO, POLL_IN);
 		}
-	} else {
+	} else
 		u->ring_overflow = 1;
-	}
 
+out:
 	spin_unlock(&port_user_lock);
 
 	return IRQ_HANDLED;
@@ -198,9 +230,18 @@ static ssize_t evtchn_write(struct file *file, const char __user *buf,
 		goto out;
 
 	spin_lock_irq(&port_user_lock);
-	for (i = 0; i < (count/sizeof(evtchn_port_t)); i++)
-		if ((kbuf[i] < NR_EVENT_CHANNELS) && (port_user[kbuf[i]] == u))
-			enable_irq(irq_from_evtchn(kbuf[i]));
+
+	for (i = 0; i < (count/sizeof(evtchn_port_t)); i++) {
+		unsigned port = kbuf[i];
+
+		if (port < NR_EVENT_CHANNELS &&
+		    get_port_user(port) == u &&
+		    !get_port_enabled(port)) {
+			set_port_enabled(port, true);
+			enable_irq(irq_from_evtchn(port));
+		}
+	}
+
 	spin_unlock_irq(&port_user_lock);
 
 	rc = count;
@@ -222,8 +263,8 @@ static int evtchn_bind_to_user(struct per_user_data *u, int port)
 	 * interrupt handler yet, and our caller has already
 	 * serialized bind operations.)
 	 */
-	BUG_ON(port_user[port] != NULL);
-	port_user[port] = u;
+	BUG_ON(get_port_user(port) != NULL);
+	set_port_user(port, u);
 
 	rc = bind_evtchn_to_irqhandler(port, evtchn_interrupt, IRQF_DISABLED,
 				       u->name, (void *)(unsigned long)port);
@@ -242,7 +283,7 @@ static void evtchn_unbind_from_user(struct per_user_data *u, int port)
 	/* make sure we unbind the irq handler before clearing the port */
 	barrier();
 
-	port_user[port] = NULL;
+	set_port_user(port, NULL);
 }
 
 static long evtchn_ioctl(struct file *file,
@@ -333,7 +374,7 @@ static long evtchn_ioctl(struct file *file,
 		spin_lock_irq(&port_user_lock);
 
 		rc = -ENOTCONN;
-		if (port_user[unbind.port] != u) {
+		if (get_port_user(unbind.port) != u) {
 			spin_unlock_irq(&port_user_lock);
 			break;
 		}
@@ -355,7 +396,7 @@ static long evtchn_ioctl(struct file *file,
 
 		if (notify.port >= NR_EVENT_CHANNELS) {
 			rc = -EINVAL;
-		} else if (port_user[notify.port] != u) {
+		} else if (get_port_user(notify.port) != u) {
 			rc = -ENOTCONN;
 		} else {
 			notify_remote_via_evtchn(notify.port);
@@ -444,10 +485,10 @@ static int evtchn_release(struct inode *inode, struct file *filp)
 	free_page((unsigned long)u->ring);
 
 	for (i = 0; i < NR_EVENT_CHANNELS; i++) {
-		if (port_user[i] != u)
+		if (get_port_user(i) != u)
 			continue;
 
-		evtchn_unbind_from_user(port_user[i], i);
+		evtchn_unbind_from_user(get_port_user(i), i);
 	}
 
 	spin_unlock_irq(&port_user_lock);

From 93afe0b75ef3675ca05320919a57de8b9bbb159c Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 18 Sep 2009 16:36:58 -0700
Subject: [PATCH 0002/1066] xen/evtchn: dynamically allocate port_user array

We only need the array when running as a Xen domain, so dynamically
allocate it as needed to save on bss space.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/evtchn.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
index 4356a9a030df..709c32d949bf 100644
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -73,7 +73,7 @@ struct per_user_data {
  * Who's bound to each port?  This is logically an array of struct
  * per_user_data *, but we encode the current enabled-state in bit 0.
  */
-static unsigned long port_user[NR_EVENT_CHANNELS];
+static unsigned long *port_user;
 static DEFINE_SPINLOCK(port_user_lock); /* protects port_user[] and ring_prod */
 
 static inline struct per_user_data *get_port_user(unsigned port)
@@ -522,8 +522,11 @@ static int __init evtchn_init(void)
 	if (!xen_domain())
 		return -ENODEV;
 
+	port_user = kcalloc(NR_EVENT_CHANNELS, sizeof(*port_user), GFP_KERNEL);
+	if (port_user == NULL)
+		return -ENOMEM;
+
 	spin_lock_init(&port_user_lock);
-	memset(port_user, 0, sizeof(port_user));
 
 	/* Create '/dev/misc/evtchn'. */
 	err = misc_register(&evtchn_miscdev);
@@ -539,6 +542,9 @@ static int __init evtchn_init(void)
 
 static void __exit evtchn_cleanup(void)
 {
+	kfree(port_user);
+	port_user = NULL;
+
 	misc_deregister(&evtchn_miscdev);
 }
 

From 0edce91dcd83160019867a00746c679344dc0bbd Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 18 Sep 2009 16:55:29 -0700
Subject: [PATCH 0003/1066] xen/evtchn: ports start enabled

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/evtchn.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
index 709c32d949bf..72dc7f20c5ed 100644
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -108,10 +108,9 @@ irqreturn_t evtchn_interrupt(int irq, void *data)
 
 	u = get_port_user(port);
 
-	if (WARN(!get_port_enabled(port),
-		 "Interrupt for port %d, but apparently not enabled; per-user %p\n",
-		 port, u))
-		goto out;
+	WARN(!get_port_enabled(port),
+	     "Interrupt for port %d, but apparently not enabled; per-user %p\n",
+	     port, u);
 
 	disable_irq_nosync(irq);
 	set_port_enabled(port, false);
@@ -127,7 +126,6 @@ irqreturn_t evtchn_interrupt(int irq, void *data)
 	} else
 		u->ring_overflow = 1;
 
-out:
 	spin_unlock(&port_user_lock);
 
 	return IRQ_HANDLED;
@@ -265,6 +263,7 @@ static int evtchn_bind_to_user(struct per_user_data *u, int port)
 	 */
 	BUG_ON(get_port_user(port) != NULL);
 	set_port_user(port, u);
+	set_port_enabled(port, true); /* start enabled */
 
 	rc = bind_evtchn_to_irqhandler(port, evtchn_interrupt, IRQF_DISABLED,
 				       u->name, (void *)(unsigned long)port);

From 1a1a17cddbfb1f81222b3f18ee8530c41fbc3b82 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 18 Sep 2009 17:13:41 -0700
Subject: [PATCH 0004/1066] xen/evtchn: remove spurious barrier

evtchn_unbind_from_user() is called under a lock, so there's no need to
worry about the ordering of unbind_from_irqhandler vs clearing the port
per-user data.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/evtchn.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
index 72dc7f20c5ed..f79ac5ca3793 100644
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -279,9 +279,6 @@ static void evtchn_unbind_from_user(struct per_user_data *u, int port)
 
 	unbind_from_irqhandler(irq, (void *)(unsigned long)port);
 
-	/* make sure we unbind the irq handler before clearing the port */
-	barrier();
-
 	set_port_user(port, NULL);
 }
 

From 3f5e554f669098c84c82ce75e7577f7e0f3fccde Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 28 May 2010 15:28:27 -0700
Subject: [PATCH 0005/1066] xen/evtchn: don't do unbind_from_irqhandler under
 spinlock

unbind_from_irqhandler can end up doing /proc operations, which can't
happen under a spinlock.  So before removing the IRQ handler,
disable the irq under the port_user lock (masking the underlying event
channel and making sure the irq handler isn't running concurrently and
won't start running), then remove the handler without the lock.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/evtchn.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
index f79ac5ca3793..6a3a12945d02 100644
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -375,10 +375,12 @@ static long evtchn_ioctl(struct file *file,
 			break;
 		}
 
-		evtchn_unbind_from_user(u, unbind.port);
+		disable_irq(irq_from_evtchn(unbind.port));
 
 		spin_unlock_irq(&port_user_lock);
 
+		evtchn_unbind_from_user(u, unbind.port);
+
 		rc = 0;
 		break;
 	}
@@ -484,11 +486,18 @@ static int evtchn_release(struct inode *inode, struct file *filp)
 		if (get_port_user(i) != u)
 			continue;
 
-		evtchn_unbind_from_user(get_port_user(i), i);
+		disable_irq(irq_from_evtchn(i));
 	}
 
 	spin_unlock_irq(&port_user_lock);
 
+	for (i = 0; i < NR_EVENT_CHANNELS; i++) {
+		if (get_port_user(i) != u)
+			continue;
+
+		evtchn_unbind_from_user(get_port_user(i), i);
+	}
+
 	kfree(u->name);
 	kfree(u);
 

From 376d908f52427591cef4acd172db9c3ef28676ec Mon Sep 17 00:00:00 2001
From: Bastian Blank <waldi@debian.org>
Date: Fri, 28 May 2010 15:43:49 -0700
Subject: [PATCH 0006/1066] xen/evtchn: Fix name of Xen event-channel device

The Xen event-channel device is named evtchn in the kernel but always
used as /dev/xen/evtchn in userspace. This patch fixes the name.

Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/evtchn.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
index 6a3a12945d02..68119f6324d4 100644
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -517,7 +517,7 @@ static const struct file_operations evtchn_fops = {
 
 static struct miscdevice evtchn_miscdev = {
 	.minor        = MISC_DYNAMIC_MINOR,
-	.name         = "evtchn",
+	.name         = "xen/evtchn",
 	.fops         = &evtchn_fops,
 };
 static int __init evtchn_init(void)

From 70697d540c0598ad023a391d4c895044db9a6624 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Tue, 5 Oct 2010 11:13:44 -0700
Subject: [PATCH 0007/1066] xen/evtchn: add missing static

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/evtchn.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
index 68119f6324d4..f3594ec2ee33 100644
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -99,7 +99,7 @@ static inline void set_port_enabled(unsigned port, bool enabled)
 		port_user[port] &= ~1;
 }
 
-irqreturn_t evtchn_interrupt(int irq, void *data)
+static irqreturn_t evtchn_interrupt(int irq, void *data)
 {
 	unsigned int port = (unsigned long)data;
 	struct per_user_data *u;

From 2fa0f93915eacf758da800e2c67b3b9adef1c5c5 Mon Sep 17 00:00:00 2001
From: Simon Guinot <sguinot@lacie.com>
Date: Thu, 21 Oct 2010 11:42:28 +0200
Subject: [PATCH 0008/1066] [ARM] Kirkwood: enhance TCLK detection

According to the Marvell LSP, the Sample at Reset regiter bit 21 can be
used to detect TCLK on 6281 and 6282 devices.

This patch has only been tested on LaCie boards.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
---
 arch/arm/mach-kirkwood/common.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 1c82d4290dad..ee99a5acc89d 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -854,10 +854,9 @@ int __init kirkwood_find_tclk(void)
 
 	kirkwood_pcie_id(&dev, &rev);
 
-	if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
-					rev == MV88F6281_REV_A1)) ||
-	    (dev == MV88F6282_DEV_ID))
-		return 200000000;
+	if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
+		if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
+			return 200000000;
 
 	return 166666667;
 }

From d3491820e8a65c4a51c8e2a165c6a13f864101ba Mon Sep 17 00:00:00 2001
From: Simon Guinot <sguinot@lacie.com>
Date: Thu, 21 Oct 2010 11:42:29 +0200
Subject: [PATCH 0009/1066] [ARM] Kirkwood: fix timer initialization for LaCie
 boards

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
---
 arch/arm/mach-kirkwood/d2net_v2-setup.c    |  2 +-
 arch/arm/mach-kirkwood/lacie_v2-common.c   | 14 --------------
 arch/arm/mach-kirkwood/lacie_v2-common.h   |  2 --
 arch/arm/mach-kirkwood/netspace_v2-setup.c |  6 +++---
 arch/arm/mach-kirkwood/netxbig_v2-setup.c  |  4 ++--
 5 files changed, 6 insertions(+), 22 deletions(-)

diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index cd62d0f82a73..b8078aeebef9 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -227,5 +227,5 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
 	.init_machine	= d2net_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
index d3ea1b6c8a02..285edab776e9 100644
--- a/arch/arm/mach-kirkwood/lacie_v2-common.c
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.c
@@ -111,17 +111,3 @@ void __init lacie_v2_hdd_power_init(int hdd_num)
 			pr_err("Failed to power up HDD%d\n", i + 1);
 	}
 }
-
-/*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void lacie_v2_timer_init(void)
-{
-	kirkwood_tclk = 166666667;
-	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer lacie_v2_timer = {
-	.init = lacie_v2_timer_init,
-};
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h
index af521315b87b..fc64f578536e 100644
--- a/arch/arm/mach-kirkwood/lacie_v2-common.h
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.h
@@ -13,6 +13,4 @@ void lacie_v2_register_flash(void);
 void lacie_v2_register_i2c_devices(void);
 void lacie_v2_hdd_power_init(int hdd_num);
 
-extern struct sys_timer lacie_v2_timer;
-
 #endif
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index fed264d28f4a..fc934e5a9ed0 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -221,7 +221,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
 
@@ -233,7 +233,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
 
@@ -245,6 +245,6 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index d970e1eee37d..a855c9f08291 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -405,7 +405,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
 
@@ -417,6 +417,6 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif

From 3924996bab2845bdf9a9d16ff7c20445de1ab55d Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@fluxnic.net>
Date: Thu, 21 Oct 2010 15:48:33 -0400
Subject: [PATCH 0010/1066] [ARM] Kirkwood: restrict the scope of the PCIe
 reset workaround

Commit 21f0ba90a447 "orion/kirkwood: reset PCIe unit on boot" made the
reset of the PCIe unit unconditional.  While this may fix problems on some
targets, this also causes problems on other targets.

Saeed Bishara <saeed@marvell.com> said about the original problem: "We
couln't pinpoint the root cause of this issue, actually we failed to
reproduce that issue."

So let's restrict the reset of the PCIe unit only to the target where
the original problem was observed.

Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
---
 arch/arm/mach-kirkwood/ts41x-setup.c    | 14 +++++++++++++-
 arch/arm/plat-orion/include/plat/pcie.h |  3 +++
 arch/arm/plat-orion/pcie.c              |  5 -----
 3 files changed, 16 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index 2e14afef07a2..6995199a9127 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -27,6 +27,10 @@
 #include "mpp.h"
 #include "tsx1x-common.h"
 
+/* for the PCIe reset workaround */
+#include <plat/pcie.h>
+
+
 #define QNAP_TS41X_JUMPER_JP1	45
 
 static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
@@ -140,8 +144,16 @@ static void __init qnap_ts41x_init(void)
 
 static int __init ts41x_pci_init(void)
 {
-	if (machine_is_ts41x())
+	if (machine_is_ts41x()) {
+		/*
+		 * Without this explicit reset, the PCIe SATA controller
+		 * (Marvell 88sx7042/sata_mv) is known to stop working
+		 * after a few minutes.
+		 */
+		orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+
 		kirkwood_pcie_init(KW_PCIE0);
+	}
 
    return 0;
 }
diff --git a/arch/arm/plat-orion/include/plat/pcie.h b/arch/arm/plat-orion/include/plat/pcie.h
index 3ebfef72b4e7..cc99163e73fd 100644
--- a/arch/arm/plat-orion/include/plat/pcie.h
+++ b/arch/arm/plat-orion/include/plat/pcie.h
@@ -11,12 +11,15 @@
 #ifndef __PLAT_PCIE_H
 #define __PLAT_PCIE_H
 
+struct pci_bus;
+
 u32 orion_pcie_dev_id(void __iomem *base);
 u32 orion_pcie_rev(void __iomem *base);
 int orion_pcie_link_up(void __iomem *base);
 int orion_pcie_x4_mode(void __iomem *base);
 int orion_pcie_get_local_bus_nr(void __iomem *base);
 void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
+void orion_pcie_reset(void __iomem *base);
 void orion_pcie_setup(void __iomem *base,
 		      struct mbus_dram_target_info *dram);
 int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index 779553a1595e..af2d733c50b5 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -181,11 +181,6 @@ void __init orion_pcie_setup(void __iomem *base,
 	u16 cmd;
 	u32 mask;
 
-	/*
-	 * soft reset PCIe unit
-	 */
-	orion_pcie_reset(base);
-
 	/*
 	 * Point PCIe unit MBUS decode windows to DRAM space.
 	 */

From aaa8e2b34c35d67abf1892cd62ea4e7565ca262c Mon Sep 17 00:00:00 2001
From: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Fri, 15 Oct 2010 13:16:53 +0200
Subject: [PATCH 0011/1066] drbd: consolidate explicit drbd_md_sync into
 drbd_create_new_uuid

Every code path changing the current UUID needs to get it on stable
storage anyways. Flush it to disk right there, remove the now obsolte
explicit drbd_md_sync statements in the other code paths.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---
 drivers/block/drbd/drbd_main.c | 3 ++-
 drivers/block/drbd/drbd_nl.c   | 1 -
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 8bfedc7164fa..8d029b14e7cc 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -1267,7 +1267,6 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os,
 			if (test_bit(NEW_CUR_UUID, &mdev->flags)) {
 				drbd_uuid_new_current(mdev);
 				clear_bit(NEW_CUR_UUID, &mdev->flags);
-				drbd_md_sync(mdev);
 			}
 			spin_lock_irq(&mdev->req_lock);
 			_drbd_set_state(_NS(mdev, susp_fen, 0), CS_VERBOSE, NULL);
@@ -3659,6 +3658,8 @@ void drbd_uuid_new_current(struct drbd_conf *mdev) __must_hold(local)
 
 	get_random_bytes(&val, sizeof(u64));
 	_drbd_uuid_set(mdev, UI_CURRENT, val);
+	/* get it to stable storage _now_ */
+	drbd_md_sync(mdev);
 }
 
 void drbd_uuid_set_bm(struct drbd_conf *mdev, u64 val) __must_hold(local)
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 87925e97e613..c498c4827de4 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -1953,7 +1953,6 @@ static int drbd_nl_resume_io(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
 	if (test_bit(NEW_CUR_UUID, &mdev->flags)) {
 		drbd_uuid_new_current(mdev);
 		clear_bit(NEW_CUR_UUID, &mdev->flags);
-		drbd_md_sync(mdev);
 	}
 	drbd_suspend_io(mdev);
 	reply->ret_code = drbd_request_state(mdev, NS3(susp, 0, susp_nod, 0, susp_fen, 0));

From 3beec1d446fba335f07787636920892dd3b2c658 Mon Sep 17 00:00:00 2001
From: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Thu, 14 Oct 2010 13:31:48 +0200
Subject: [PATCH 0012/1066] drbd: tag a few error messages with "assert failed"

If those messages ever get logged, clearly state that they are
actually failed ASSERTS, so our regression tests can pick them up
from the logs more easily.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---
 drivers/block/drbd/drbd_int.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index c07c370c4c82..e0e0bf6f16a1 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -114,11 +114,11 @@ struct drbd_conf;
 #define D_ASSERT(exp)	if (!(exp)) \
 	 dev_err(DEV, "ASSERT( " #exp " ) in %s:%d\n", __FILE__, __LINE__)
 
-#define ERR_IF(exp) if (({				\
-	int _b = (exp) != 0;				\
-	if (_b) dev_err(DEV, "%s: (%s) in %s:%d\n",	\
-		__func__, #exp, __FILE__, __LINE__);	\
-	 _b;						\
+#define ERR_IF(exp) if (({						\
+	int _b = (exp) != 0;						\
+	if (_b) dev_err(DEV, "ASSERT FAILED: %s: (%s) in %s:%d\n",	\
+			__func__, #exp, __FILE__, __LINE__);		\
+	_b;								\
 	}))
 
 /* Defines to control fault insertion */

From 82f59cc6353889b426cf13b6596d5a3d100fa09e Mon Sep 17 00:00:00 2001
From: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Sat, 16 Oct 2010 12:13:47 +0200
Subject: [PATCH 0013/1066] drbd: fix potential deadlock on detach

If we have contention in drbd_al_begin_iod (heavy randon IO),
an administrative request to detach the disk may deadlock
for similar reasons as the recently fixed deadlock if detaching
because of IO-error.

The approach taken here is to either go through the intermediate
cleanup state D_FAILED, or first lock out application io,
don't just go directly to D_DISKLESS.

We need an additional state bit (WAS_IO_ERROR) to distinguish
the -> D_FAILED because of IO-error from other failures.

Sanitize D_ATTACHING -> D_FAILED to D_ATTACHING -> D_DISKLESS.
If only attaching, ldev may be missing still, but would be referenced
from within the after_state_ch for -> D_FAILED, potentially
dereferencing a NULL pointer.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---
 drivers/block/drbd/drbd_int.h      |  20 +++--
 drivers/block/drbd/drbd_main.c     | 138 +++++++++++++++++------------
 drivers/block/drbd/drbd_nl.c       |  16 +++-
 drivers/block/drbd/drbd_receiver.c |   2 +-
 4 files changed, 113 insertions(+), 63 deletions(-)

diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index e0e0bf6f16a1..03c15e317c37 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -852,7 +852,8 @@ enum {
 	BITMAP_IO,		/* suspend application io;
 				   once no more io in flight, start bitmap io */
 	BITMAP_IO_QUEUED,       /* Started bitmap IO */
-	GO_DISKLESS,		/* Disk failed, local_cnt reached zero, we are going diskless */
+	GO_DISKLESS,		/* Disk is being detached, on io-error or admin request. */
+	WAS_IO_ERROR,		/* Local disk failed returned IO error */
 	RESYNC_AFTER_NEG,       /* Resync after online grow after the attach&negotiate finished. */
 	NET_CONGESTED,		/* The data socket is congested */
 
@@ -1281,6 +1282,7 @@ extern int drbd_bmio_set_n_write(struct drbd_conf *mdev);
 extern int drbd_bmio_clear_n_write(struct drbd_conf *mdev);
 extern int drbd_bitmap_io(struct drbd_conf *mdev, int (*io_fn)(struct drbd_conf *), char *why);
 extern void drbd_go_diskless(struct drbd_conf *mdev);
+extern void drbd_ldev_destroy(struct drbd_conf *mdev);
 
 
 /* Meta data layout
@@ -1798,17 +1800,17 @@ static inline void __drbd_chk_io_error_(struct drbd_conf *mdev, int forcedetach,
 	case EP_PASS_ON:
 		if (!forcedetach) {
 			if (__ratelimit(&drbd_ratelimit_state))
-				dev_err(DEV, "Local IO failed in %s."
-					     "Passing error on...\n", where);
+				dev_err(DEV, "Local IO failed in %s.\n", where);
 			break;
 		}
 		/* NOTE fall through to detach case if forcedetach set */
 	case EP_DETACH:
 	case EP_CALL_HELPER:
+		set_bit(WAS_IO_ERROR, &mdev->flags);
 		if (mdev->state.disk > D_FAILED) {
 			_drbd_set_state(_NS(mdev, disk, D_FAILED), CS_HARD, NULL);
-			dev_err(DEV, "Local IO failed in %s."
-				     "Detaching...\n", where);
+			dev_err(DEV,
+				"Local IO failed in %s. Detaching...\n", where);
 		}
 		break;
 	}
@@ -2127,7 +2129,11 @@ static inline void put_ldev(struct drbd_conf *mdev)
 	__release(local);
 	D_ASSERT(i >= 0);
 	if (i == 0) {
+		if (mdev->state.disk == D_DISKLESS)
+			/* even internal references gone, safe to destroy */
+			drbd_ldev_destroy(mdev);
 		if (mdev->state.disk == D_FAILED)
+			/* all application IO references gone. */
 			drbd_go_diskless(mdev);
 		wake_up(&mdev->misc_wait);
 	}
@@ -2138,6 +2144,10 @@ static inline int _get_ldev_if_state(struct drbd_conf *mdev, enum drbd_disk_stat
 {
 	int io_allowed;
 
+	/* never get a reference while D_DISKLESS */
+	if (mdev->state.disk == D_DISKLESS)
+		return 0;
+
 	atomic_inc(&mdev->local_cnt);
 	io_allowed = (mdev->state.disk >= mins);
 	if (!io_allowed)
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 8d029b14e7cc..992c3aecdf7e 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -834,6 +834,15 @@ static union drbd_state sanitize_state(struct drbd_conf *mdev, union drbd_state
 	    ns.conn != C_UNCONNECTED && ns.conn != C_DISCONNECTING && ns.conn <= C_TEAR_DOWN)
 		ns.conn = os.conn;
 
+	/* we cannot fail (again) if we already detached */
+	if (ns.disk == D_FAILED && os.disk == D_DISKLESS)
+		ns.disk = D_DISKLESS;
+
+	/* if we are only D_ATTACHING yet,
+	 * we can (and should) go directly to D_DISKLESS. */
+	if (ns.disk == D_FAILED && os.disk == D_ATTACHING)
+		ns.disk = D_DISKLESS;
+
 	/* After C_DISCONNECTING only C_STANDALONE may follow */
 	if (os.conn == C_DISCONNECTING && ns.conn != C_STANDALONE)
 		ns.conn = os.conn;
@@ -1055,7 +1064,15 @@ int __drbd_set_state(struct drbd_conf *mdev,
 	    !test_and_set_bit(CONFIG_PENDING, &mdev->flags))
 		set_bit(DEVICE_DYING, &mdev->flags);
 
-	mdev->state.i = ns.i;
+	/* if we are going -> D_FAILED or D_DISKLESS, grab one extra reference
+	 * on the ldev here, to be sure the transition -> D_DISKLESS resp.
+	 * drbd_ldev_destroy() won't happen before our corresponding
+	 * after_state_ch works run, where we put_ldev again. */
+	if ((os.disk != D_FAILED && ns.disk == D_FAILED) ||
+	    (os.disk != D_DISKLESS && ns.disk == D_DISKLESS))
+		atomic_inc(&mdev->local_cnt);
+
+	mdev->state = ns;
 	wake_up(&mdev->misc_wait);
 	wake_up(&mdev->state_wait);
 
@@ -1363,63 +1380,64 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os,
 	    os.disk > D_INCONSISTENT && ns.disk == D_INCONSISTENT)
 		drbd_queue_bitmap_io(mdev, &drbd_bmio_set_n_write, NULL, "set_n_write from invalidate");
 
-	/* first half of local IO error */
-	if (os.disk > D_FAILED && ns.disk == D_FAILED) {
-		enum drbd_io_error_p eh = EP_PASS_ON;
+	/* first half of local IO error, failure to attach,
+	 * or administrative detach */
+	if (os.disk != D_FAILED && ns.disk == D_FAILED) {
+		enum drbd_io_error_p eh;
+		int was_io_error;
+		/* corresponding get_ldev was in __drbd_set_state, to serialize
+		 * our cleanup here with the transition to D_DISKLESS,
+		 * so it is safe to dreference ldev here. */
+		eh = mdev->ldev->dc.on_io_error;
+		was_io_error = test_and_clear_bit(WAS_IO_ERROR, &mdev->flags);
+
+		/* current state still has to be D_FAILED,
+		 * there is only one way out: to D_DISKLESS,
+		 * and that may only happen after our put_ldev below. */
+		if (mdev->state.disk != D_FAILED)
+			dev_err(DEV,
+				"ASSERT FAILED: disk is %s during detach\n",
+				drbd_disk_str(mdev->state.disk));
 
 		if (drbd_send_state(mdev))
-			dev_warn(DEV, "Notified peer that my disk is broken.\n");
+			dev_warn(DEV, "Notified peer that I am detaching my disk\n");
 		else
-			dev_err(DEV, "Sending state for drbd_io_error() failed\n");
+			dev_err(DEV, "Sending state for detaching disk failed\n");
 
 		drbd_rs_cancel_all(mdev);
 
-		if (get_ldev_if_state(mdev, D_FAILED)) {
-			eh = mdev->ldev->dc.on_io_error;
-			put_ldev(mdev);
-		}
-		if (eh == EP_CALL_HELPER)
+		/* In case we want to get something to stable storage still,
+		 * this may be the last chance.
+		 * Following put_ldev may transition to D_DISKLESS. */
+		drbd_md_sync(mdev);
+		put_ldev(mdev);
+
+		if (was_io_error && eh == EP_CALL_HELPER)
 			drbd_khelper(mdev, "local-io-error");
 	}
 
+        /* second half of local IO error, failure to attach,
+         * or administrative detach,
+         * after local_cnt references have reached zero again */
+        if (os.disk != D_DISKLESS && ns.disk == D_DISKLESS) {
+                /* We must still be diskless,
+                 * re-attach has to be serialized with this! */
+                if (mdev->state.disk != D_DISKLESS)
+                        dev_err(DEV,
+                                "ASSERT FAILED: disk is %s while going diskless\n",
+                                drbd_disk_str(mdev->state.disk));
 
-	/* second half of local IO error handling,
-	 * after local_cnt references have reached zero: */
-	if (os.disk == D_FAILED && ns.disk == D_DISKLESS) {
-		mdev->rs_total = 0;
-		mdev->rs_failed = 0;
-		atomic_set(&mdev->rs_pending_cnt, 0);
-	}
+                mdev->rs_total = 0;
+                mdev->rs_failed = 0;
+                atomic_set(&mdev->rs_pending_cnt, 0);
 
-	if (os.disk > D_DISKLESS && ns.disk == D_DISKLESS) {
-		/* We must still be diskless,
-		 * re-attach has to be serialized with this! */
-		if (mdev->state.disk != D_DISKLESS)
-			dev_err(DEV,
-				"ASSERT FAILED: disk is %s while going diskless\n",
-				drbd_disk_str(mdev->state.disk));
-
-		/* we cannot assert local_cnt == 0 here, as get_ldev_if_state
-		 * will inc/dec it frequently. Since we became D_DISKLESS, no
-		 * one has touched the protected members anymore, though, so we
-		 * are safe to free them here. */
 		if (drbd_send_state(mdev))
-			dev_warn(DEV, "Notified peer that I detached my disk.\n");
+			dev_warn(DEV, "Notified peer that I'm now diskless.\n");
 		else
-			dev_err(DEV, "Sending state for detach failed\n");
-
-		lc_destroy(mdev->resync);
-		mdev->resync = NULL;
-		lc_destroy(mdev->act_log);
-		mdev->act_log = NULL;
-		__no_warn(local,
-			drbd_free_bc(mdev->ldev);
-			mdev->ldev = NULL;);
-
-		if (mdev->md_io_tmpp) {
-			__free_page(mdev->md_io_tmpp);
-			mdev->md_io_tmpp = NULL;
-		}
+			dev_err(DEV, "Sending state for being diskless failed\n");
+		/* corresponding get_ldev in __drbd_set_state
+		 * this may finaly trigger drbd_ldev_destroy. */
+		put_ldev(mdev);
 	}
 
 	/* Disks got bigger while they were detached */
@@ -2897,7 +2915,6 @@ void drbd_mdev_cleanup(struct drbd_conf *mdev)
 	D_ASSERT(list_empty(&mdev->resync_work.list));
 	D_ASSERT(list_empty(&mdev->unplug_work.list));
 	D_ASSERT(list_empty(&mdev->go_diskless.list));
-
 }
 
 
@@ -3756,19 +3773,31 @@ static int w_bitmap_io(struct drbd_conf *mdev, struct drbd_work *w, int unused)
 	return 1;
 }
 
+void drbd_ldev_destroy(struct drbd_conf *mdev)
+{
+	lc_destroy(mdev->resync);
+	mdev->resync = NULL;
+	lc_destroy(mdev->act_log);
+	mdev->act_log = NULL;
+	__no_warn(local,
+		drbd_free_bc(mdev->ldev);
+		mdev->ldev = NULL;);
+
+	if (mdev->md_io_tmpp) {
+		__free_page(mdev->md_io_tmpp);
+		mdev->md_io_tmpp = NULL;
+	}
+	clear_bit(GO_DISKLESS, &mdev->flags);
+}
+
 static int w_go_diskless(struct drbd_conf *mdev, struct drbd_work *w, int unused)
 {
 	D_ASSERT(mdev->state.disk == D_FAILED);
 	/* we cannot assert local_cnt == 0 here, as get_ldev_if_state will
 	 * inc/dec it frequently. Once we are D_DISKLESS, no one will touch
-	 * the protected members anymore, though, so in the after_state_ch work
-	 * it will be safe to free them. */
+	 * the protected members anymore, though, so once put_ldev reaches zero
+	 * again, it will be safe to free them. */
 	drbd_force_state(mdev, NS(disk, D_DISKLESS));
-	/* We need to wait for return of references checked out while we still
-	 * have been D_FAILED, though (drbd_md_sync, bitmap io). */
-	wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
-
-	clear_bit(GO_DISKLESS, &mdev->flags);
 	return 1;
 }
 
@@ -3777,9 +3806,6 @@ void drbd_go_diskless(struct drbd_conf *mdev)
 	D_ASSERT(mdev->state.disk == D_FAILED);
 	if (!test_and_set_bit(GO_DISKLESS, &mdev->flags))
 		drbd_queue_work(&mdev->data.work, &mdev->go_diskless);
-		/* don't drbd_queue_work_front,
-		 * we need to serialize with the after_state_ch work
-		 * of the -> D_FAILED transition. */
 }
 
 /**
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index c498c4827de4..0cba7d3d2b5d 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -870,6 +870,11 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
 		retcode = ERR_DISK_CONFIGURED;
 		goto fail;
 	}
+	/* It may just now have detached because of IO error.  Make sure
+	 * drbd_ldev_destroy is done already, we may end up here very fast,
+	 * e.g. if someone calls attach from the on-io-error handler,
+	 * to realize a "hot spare" feature (not that I'd recommend that) */
+	wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
 
 	/* allocation not in the IO path, cqueue thread context */
 	nbc = kzalloc(sizeof(struct drbd_backing_dev), GFP_KERNEL);
@@ -1262,7 +1267,7 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
  force_diskless_dec:
 	put_ldev(mdev);
  force_diskless:
-	drbd_force_state(mdev, NS(disk, D_DISKLESS));
+	drbd_force_state(mdev, NS(disk, D_FAILED));
 	drbd_md_sync(mdev);
  release_bdev2_fail:
 	if (nbc)
@@ -1285,10 +1290,19 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
 	return 0;
 }
 
+/* Detaching the disk is a process in multiple stages.  First we need to lock
+ * out application IO, in-flight IO, IO stuck in drbd_al_begin_io.
+ * Then we transition to D_DISKLESS, and wait for put_ldev() to return all
+ * internal references as well.
+ * Only then we have finally detached. */
 static int drbd_nl_detach(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
 			  struct drbd_nl_cfg_reply *reply)
 {
+	drbd_suspend_io(mdev); /* so no-one is stuck in drbd_al_begin_io */
 	reply->ret_code = drbd_request_state(mdev, NS(disk, D_DISKLESS));
+	if (mdev->state.disk == D_DISKLESS)
+		wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
+	drbd_resume_io(mdev);
 	return 0;
 }
 
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 6ec922c623a1..04a823b01da5 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -3363,7 +3363,7 @@ static int receive_state(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned
 		if (ns.conn == C_MASK) {
 			ns.conn = C_CONNECTED;
 			if (mdev->state.disk == D_NEGOTIATING) {
-				drbd_force_state(mdev, NS(disk, D_DISKLESS));
+				drbd_force_state(mdev, NS(disk, D_FAILED));
 			} else if (peer_state.disk == D_NEGOTIATING) {
 				dev_err(DEV, "Disk attach process on the peer node was aborted.\n");
 				peer_state.disk = D_DISKLESS;

From 6719fb036cea56a5ee9d0ac912ed8c7cabb27f49 Mon Sep 17 00:00:00 2001
From: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Mon, 18 Oct 2010 23:04:07 +0200
Subject: [PATCH 0014/1066] drbd: fix potential data divergence after multiple
 failures

If we get an IO-error during an activity log transaction,
if we failed to write the bitmap of the evicted extent,
we must not write the transaction itself.
If we failed to write the transaction,
we must not even submit the corresponding bio,
as its extent is not yet marked in the activity log.

Otherwise, if this was a disconneted Primary (degraded cluster), which
now lost its disk as well, and we later re-attach the same backend
storage, we possibly "forget" to resync some parts of the disk that
potentially have been changed.

On the receiving side, when receiving from a peer with unhealthy disk,
checking for pdsk == D_DISKLESS is not enough, we need to set out of
sync and do AL transactions for everything pdsk < D_INCONSISTENT on the
receiving side.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---
 drivers/block/drbd/drbd_actlog.c   | 26 +++++++++++++++++++++-----
 drivers/block/drbd/drbd_receiver.c |  3 ++-
 drivers/block/drbd/drbd_req.c      | 19 ++++++++++++++-----
 3 files changed, 37 insertions(+), 11 deletions(-)

diff --git a/drivers/block/drbd/drbd_actlog.c b/drivers/block/drbd/drbd_actlog.c
index ac04ef97eac2..bd925180a2b0 100644
--- a/drivers/block/drbd/drbd_actlog.c
+++ b/drivers/block/drbd/drbd_actlog.c
@@ -284,18 +284,32 @@ w_al_write_transaction(struct drbd_conf *mdev, struct drbd_work *w, int unused)
 	u32 xor_sum = 0;
 
 	if (!get_ldev(mdev)) {
-		dev_err(DEV, "get_ldev() failed in w_al_write_transaction\n");
+		dev_err(DEV,
+			"disk is %s, cannot start al transaction (-%d +%d)\n",
+			drbd_disk_str(mdev->state.disk), evicted, new_enr);
 		complete(&((struct update_al_work *)w)->event);
 		return 1;
 	}
 	/* do we have to do a bitmap write, first?
 	 * TODO reduce maximum latency:
 	 * submit both bios, then wait for both,
-	 * instead of doing two synchronous sector writes. */
+	 * instead of doing two synchronous sector writes.
+	 * For now, we must not write the transaction,
+	 * if we cannot write out the bitmap of the evicted extent. */
 	if (mdev->state.conn < C_CONNECTED && evicted != LC_FREE)
 		drbd_bm_write_sect(mdev, evicted/AL_EXT_PER_BM_SECT);
 
-	mutex_lock(&mdev->md_io_mutex); /* protects md_io_page, al_tr_cycle, ... */
+	/* The bitmap write may have failed, causing a state change. */
+	if (mdev->state.disk < D_INCONSISTENT) {
+		dev_err(DEV,
+			"disk is %s, cannot write al transaction (-%d +%d)\n",
+			drbd_disk_str(mdev->state.disk), evicted, new_enr);
+		complete(&((struct update_al_work *)w)->event);
+		put_ldev(mdev);
+		return 1;
+	}
+
+	mutex_lock(&mdev->md_io_mutex); /* protects md_io_buffer, al_tr_cycle, ... */
 	buffer = (struct al_transaction *)page_address(mdev->md_io_page);
 
 	buffer->magic = __constant_cpu_to_be32(DRBD_MAGIC);
@@ -739,7 +753,7 @@ void drbd_al_apply_to_bm(struct drbd_conf *mdev)
 	unsigned int enr;
 	unsigned long add = 0;
 	char ppb[10];
-	int i;
+	int i, tmp;
 
 	wait_event(mdev->al_wait, lc_try_lock(mdev->act_log));
 
@@ -747,7 +761,9 @@ void drbd_al_apply_to_bm(struct drbd_conf *mdev)
 		enr = lc_element_by_index(mdev->act_log, i)->lc_number;
 		if (enr == LC_FREE)
 			continue;
-		add += drbd_bm_ALe_set_all(mdev, enr);
+		tmp = drbd_bm_ALe_set_all(mdev, enr);
+		dynamic_dev_dbg(DEV, "AL: set %d bits in extent %u\n", tmp, enr);
+		add += tmp;
 	}
 
 	lc_unlock(mdev->act_log);
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 04a823b01da5..1146faa7ae38 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -1995,10 +1995,11 @@ static int receive_Data(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned
 		break;
 	}
 
-	if (mdev->state.pdsk == D_DISKLESS) {
+	if (mdev->state.pdsk < D_INCONSISTENT) {
 		/* In case we have the only disk of the cluster, */
 		drbd_set_out_of_sync(mdev, e->sector, e->size);
 		e->flags |= EE_CALL_AL_COMPLETE_IO;
+		e->flags &= ~EE_MAY_SET_IN_SYNC;
 		drbd_al_begin_io(mdev, e->sector);
 	}
 
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index 9e91a2545fc8..d26b213dbf15 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -942,12 +942,21 @@ allocate_barrier:
 	if (local) {
 		req->private_bio->bi_bdev = mdev->ldev->backing_bdev;
 
-		if (FAULT_ACTIVE(mdev, rw == WRITE ? DRBD_FAULT_DT_WR
-				     : rw == READ  ? DRBD_FAULT_DT_RD
-				     :               DRBD_FAULT_DT_RA))
+		/* State may have changed since we grabbed our reference on the
+		 * mdev->ldev member. Double check, and short-circuit to endio.
+		 * In case the last activity log transaction failed to get on
+		 * stable storage, and this is a WRITE, we may not even submit
+		 * this bio. */
+		if (get_ldev(mdev)) {
+			if (FAULT_ACTIVE(mdev, rw == WRITE ? DRBD_FAULT_DT_WR
+					     : rw == READ  ? DRBD_FAULT_DT_RD
+					     :               DRBD_FAULT_DT_RA))
+				bio_endio(req->private_bio, -EIO);
+			else
+				generic_make_request(req->private_bio);
+			put_ldev(mdev);
+		} else
 			bio_endio(req->private_bio, -EIO);
-		else
-			generic_make_request(req->private_bio);
 	}
 
 	/* we need to plug ALWAYS since we possibly need to kick lo_dev.

From bc571b8cb930ea78207851dd38b5a435fcb8891c Mon Sep 17 00:00:00 2001
From: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Thu, 21 Oct 2010 18:07:31 +0200
Subject: [PATCH 0015/1066] drbd: fix a misleading printk

This codepath used to be called only for failed kmalloc GFP_ATOMIC,
but is now also triggered by other things.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---
 drivers/block/drbd/drbd_worker.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
index 108d58015cd1..1a2d2f0759b2 100644
--- a/drivers/block/drbd/drbd_worker.c
+++ b/drivers/block/drbd/drbd_worker.c
@@ -925,7 +925,7 @@ out:
 	drbd_md_sync(mdev);
 
 	if (test_and_clear_bit(WRITE_BM_AFTER_RESYNC, &mdev->flags)) {
-		dev_warn(DEV, "Writing the whole bitmap, due to failed kmalloc\n");
+		dev_info(DEV, "Writing the whole bitmap\n");
 		drbd_queue_bitmap_io(mdev, &drbd_bm_write, NULL, "write from resync_finished");
 	}
 

From fb2c7a10eec051317ff091b2cb2d73c5ecd98c19 Mon Sep 17 00:00:00 2001
From: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Tue, 19 Oct 2010 12:08:13 +0200
Subject: [PATCH 0016/1066] drbd: rate limit an error message

If we don't rate limit it, and you happen to log err level messages via
serial console, an IO error on a disconnected Primary may cause serious
unresponsiveness.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---
 drivers/block/drbd/drbd_req.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index d26b213dbf15..31d04b17c45f 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -813,7 +813,8 @@ static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio)
 			     mdev->state.conn >= C_CONNECTED));
 
 	if (!(local || remote) && !is_susp(mdev->state)) {
-		dev_err(DEV, "IO ERROR: neither local nor remote disk\n");
+		if (__ratelimit(&drbd_ratelimit_state))
+			dev_err(DEV, "IO ERROR: neither local nor remote disk\n");
 		goto fail_free_complete;
 	}
 

From 8825f7c3e5c7b251b49fc594658a96f59417ee16 Mon Sep 17 00:00:00 2001
From: Philipp Reisner <philipp.reisner@linbit.com>
Date: Thu, 21 Oct 2010 17:21:19 +0200
Subject: [PATCH 0017/1066] drbd: Silenced an assert

That assertion's condition needed adjustment for today's semantics

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---
 drivers/block/drbd/drbd_req.c | 2 +-
 include/linux/drbd.h          | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index 31d04b17c45f..5c2254853559 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -258,7 +258,7 @@ void _req_may_be_done(struct drbd_request *req, struct bio_and_error *m)
 		if (!hlist_unhashed(&req->colision))
 			hlist_del(&req->colision);
 		else
-			D_ASSERT((s & RQ_NET_MASK) == 0);
+			D_ASSERT((s & (RQ_NET_MASK & ~RQ_NET_DONE)) == 0);
 
 		/* for writes we need to do some extra housekeeping */
 		if (rw == WRITE)
diff --git a/include/linux/drbd.h b/include/linux/drbd.h
index 9b2a0158f399..ef44c7a0638c 100644
--- a/include/linux/drbd.h
+++ b/include/linux/drbd.h
@@ -53,7 +53,7 @@
 
 
 extern const char *drbd_buildtag(void);
-#define REL_VERSION "8.3.9rc2"
+#define REL_VERSION "8.3.9"
 #define API_VERSION 88
 #define PRO_VERSION_MIN 86
 #define PRO_VERSION_MAX 95

From 2451fc3b2bd3a7205270da75a21dde0d5d7c96a2 Mon Sep 17 00:00:00 2001
From: Philipp Reisner <philipp.reisner@linbit.com>
Date: Tue, 24 Aug 2010 13:43:11 +0200
Subject: [PATCH 0018/1066] drbd: Removed the BIO_RW_BARRIER support form the
 receiver/epoch code

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---
 drivers/block/drbd/drbd_int.h      |  12 --
 drivers/block/drbd/drbd_main.c     |   2 +-
 drivers/block/drbd/drbd_nl.c       |   4 +-
 drivers/block/drbd/drbd_proc.c     |   1 -
 drivers/block/drbd/drbd_receiver.c | 212 ++++-------------------------
 drivers/block/drbd/drbd_worker.c   |  21 ---
 6 files changed, 33 insertions(+), 219 deletions(-)

diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index 03c15e317c37..1b915fd9278f 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -749,17 +749,12 @@ struct drbd_epoch {
 
 /* drbd_epoch flag bits */
 enum {
-	DE_BARRIER_IN_NEXT_EPOCH_ISSUED,
-	DE_BARRIER_IN_NEXT_EPOCH_DONE,
-	DE_CONTAINS_A_BARRIER,
 	DE_HAVE_BARRIER_NUMBER,
-	DE_IS_FINISHING,
 };
 
 enum epoch_event {
 	EV_PUT,
 	EV_GOT_BARRIER_NR,
-	EV_BARRIER_DONE,
 	EV_BECAME_LAST,
 	EV_CLEANUP = 32, /* used as flag */
 };
@@ -801,11 +796,6 @@ enum {
 	__EE_CALL_AL_COMPLETE_IO,
 	__EE_MAY_SET_IN_SYNC,
 
-	/* This epoch entry closes an epoch using a barrier.
-	 * On sucessful completion, the epoch is released,
-	 * and the P_BARRIER_ACK send. */
-	__EE_IS_BARRIER,
-
 	/* In case a barrier failed,
 	 * we need to resubmit without the barrier flag. */
 	__EE_RESUBMITTED,
@@ -820,7 +810,6 @@ enum {
 };
 #define EE_CALL_AL_COMPLETE_IO (1<<__EE_CALL_AL_COMPLETE_IO)
 #define EE_MAY_SET_IN_SYNC     (1<<__EE_MAY_SET_IN_SYNC)
-#define EE_IS_BARRIER          (1<<__EE_IS_BARRIER)
 #define	EE_RESUBMITTED         (1<<__EE_RESUBMITTED)
 #define EE_WAS_ERROR           (1<<__EE_WAS_ERROR)
 #define EE_HAS_DIGEST          (1<<__EE_HAS_DIGEST)
@@ -948,7 +937,6 @@ enum write_ordering_e {
 	WO_none,
 	WO_drain_io,
 	WO_bdev_flush,
-	WO_bio_barrier
 };
 
 struct fifo_buffer {
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 992c3aecdf7e..8e0d707df23d 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -2858,7 +2858,7 @@ void drbd_init_set_defaults(struct drbd_conf *mdev)
 	drbd_thread_init(mdev, &mdev->asender, drbd_asender);
 
 	mdev->agreed_pro_version = PRO_VERSION_MAX;
-	mdev->write_ordering = WO_bio_barrier;
+	mdev->write_ordering = WO_bdev_flush;
 	mdev->resync_wenr = LC_FREE;
 }
 
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 0cba7d3d2b5d..899878fcf97d 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -1117,8 +1117,8 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
 	nbc = NULL;
 	resync_lru = NULL;
 
-	mdev->write_ordering = WO_bio_barrier;
-	drbd_bump_write_ordering(mdev, WO_bio_barrier);
+	mdev->write_ordering = WO_bdev_flush;
+	drbd_bump_write_ordering(mdev, WO_bdev_flush);
 
 	if (drbd_md_test_flag(mdev->ldev, MDF_CRASHED_PRIMARY))
 		set_bit(CRASHED_PRIMARY, &mdev->flags);
diff --git a/drivers/block/drbd/drbd_proc.c b/drivers/block/drbd/drbd_proc.c
index ad325c5d0ce1..7e6ac307e2de 100644
--- a/drivers/block/drbd/drbd_proc.c
+++ b/drivers/block/drbd/drbd_proc.c
@@ -158,7 +158,6 @@ static int drbd_seq_show(struct seq_file *seq, void *v)
 		[WO_none] = 'n',
 		[WO_drain_io] = 'd',
 		[WO_bdev_flush] = 'f',
-		[WO_bio_barrier] = 'b',
 	};
 
 	seq_printf(seq, "version: " REL_VERSION " (api:%d/proto:%d-%d)\n%s\n",
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 1146faa7ae38..2952c1277b1d 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -49,11 +49,6 @@
 
 #include "drbd_vli.h"
 
-struct flush_work {
-	struct drbd_work w;
-	struct drbd_epoch *epoch;
-};
-
 enum finish_epoch {
 	FE_STILL_LIVE,
 	FE_DESTROYED,
@@ -66,16 +61,6 @@ static int drbd_do_auth(struct drbd_conf *mdev);
 static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *, struct drbd_epoch *, enum epoch_event);
 static int e_end_block(struct drbd_conf *, struct drbd_work *, int);
 
-static struct drbd_epoch *previous_epoch(struct drbd_conf *mdev, struct drbd_epoch *epoch)
-{
-	struct drbd_epoch *prev;
-	spin_lock(&mdev->epoch_lock);
-	prev = list_entry(epoch->list.prev, struct drbd_epoch, list);
-	if (prev == epoch || prev == mdev->current_epoch)
-		prev = NULL;
-	spin_unlock(&mdev->epoch_lock);
-	return prev;
-}
 
 #define GFP_TRY	(__GFP_HIGHMEM | __GFP_NOWARN)
 
@@ -981,7 +966,7 @@ static int drbd_recv_header(struct drbd_conf *mdev, enum drbd_packets *cmd, unsi
 	return TRUE;
 }
 
-static enum finish_epoch drbd_flush_after_epoch(struct drbd_conf *mdev, struct drbd_epoch *epoch)
+static void drbd_flush(struct drbd_conf *mdev)
 {
 	int rv;
 
@@ -997,24 +982,6 @@ static enum finish_epoch drbd_flush_after_epoch(struct drbd_conf *mdev, struct d
 		}
 		put_ldev(mdev);
 	}
-
-	return drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE);
-}
-
-static int w_flush(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
-{
-	struct flush_work *fw = (struct flush_work *)w;
-	struct drbd_epoch *epoch = fw->epoch;
-
-	kfree(w);
-
-	if (!test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags))
-		drbd_flush_after_epoch(mdev, epoch);
-
-	drbd_may_finish_epoch(mdev, epoch, EV_PUT |
-			      (mdev->state.conn < C_CONNECTED ? EV_CLEANUP : 0));
-
-	return 1;
 }
 
 /**
@@ -1027,15 +994,13 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
 					       struct drbd_epoch *epoch,
 					       enum epoch_event ev)
 {
-	int finish, epoch_size;
+	int epoch_size;
 	struct drbd_epoch *next_epoch;
-	int schedule_flush = 0;
 	enum finish_epoch rv = FE_STILL_LIVE;
 
 	spin_lock(&mdev->epoch_lock);
 	do {
 		next_epoch = NULL;
-		finish = 0;
 
 		epoch_size = atomic_read(&epoch->epoch_size);
 
@@ -1045,16 +1010,6 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
 			break;
 		case EV_GOT_BARRIER_NR:
 			set_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags);
-
-			/* Special case: If we just switched from WO_bio_barrier to
-			   WO_bdev_flush we should not finish the current epoch */
-			if (test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags) && epoch_size == 1 &&
-			    mdev->write_ordering != WO_bio_barrier &&
-			    epoch == mdev->current_epoch)
-				clear_bit(DE_CONTAINS_A_BARRIER, &epoch->flags);
-			break;
-		case EV_BARRIER_DONE:
-			set_bit(DE_BARRIER_IN_NEXT_EPOCH_DONE, &epoch->flags);
 			break;
 		case EV_BECAME_LAST:
 			/* nothing to do*/
@@ -1063,23 +1018,7 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
 
 		if (epoch_size != 0 &&
 		    atomic_read(&epoch->active) == 0 &&
-		    test_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags) &&
-		    epoch->list.prev == &mdev->current_epoch->list &&
-		    !test_bit(DE_IS_FINISHING, &epoch->flags)) {
-			/* Nearly all conditions are met to finish that epoch... */
-			if (test_bit(DE_BARRIER_IN_NEXT_EPOCH_DONE, &epoch->flags) ||
-			    mdev->write_ordering == WO_none ||
-			    (epoch_size == 1 && test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags)) ||
-			    ev & EV_CLEANUP) {
-				finish = 1;
-				set_bit(DE_IS_FINISHING, &epoch->flags);
-			} else if (!test_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags) &&
-				 mdev->write_ordering == WO_bio_barrier) {
-				atomic_inc(&epoch->active);
-				schedule_flush = 1;
-			}
-		}
-		if (finish) {
+		    test_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags)) {
 			if (!(ev & EV_CLEANUP)) {
 				spin_unlock(&mdev->epoch_lock);
 				drbd_send_b_ack(mdev, epoch->barrier_nr, epoch_size);
@@ -1102,6 +1041,7 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
 				/* atomic_set(&epoch->active, 0); is already zero */
 				if (rv == FE_STILL_LIVE)
 					rv = FE_RECYCLED;
+				wake_up(&mdev->ee_wait);
 			}
 		}
 
@@ -1113,22 +1053,6 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
 
 	spin_unlock(&mdev->epoch_lock);
 
-	if (schedule_flush) {
-		struct flush_work *fw;
-		fw = kmalloc(sizeof(*fw), GFP_ATOMIC);
-		if (fw) {
-			fw->w.cb = w_flush;
-			fw->epoch = epoch;
-			drbd_queue_work(&mdev->data.work, &fw->w);
-		} else {
-			dev_warn(DEV, "Could not kmalloc a flush_work obj\n");
-			set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
-			/* That is not a recursion, only one level */
-			drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE);
-			drbd_may_finish_epoch(mdev, epoch, EV_PUT);
-		}
-	}
-
 	return rv;
 }
 
@@ -1144,19 +1068,16 @@ void drbd_bump_write_ordering(struct drbd_conf *mdev, enum write_ordering_e wo)
 		[WO_none] = "none",
 		[WO_drain_io] = "drain",
 		[WO_bdev_flush] = "flush",
-		[WO_bio_barrier] = "barrier",
 	};
 
 	pwo = mdev->write_ordering;
 	wo = min(pwo, wo);
-	if (wo == WO_bio_barrier && mdev->ldev->dc.no_disk_barrier)
-		wo = WO_bdev_flush;
 	if (wo == WO_bdev_flush && mdev->ldev->dc.no_disk_flush)
 		wo = WO_drain_io;
 	if (wo == WO_drain_io && mdev->ldev->dc.no_disk_drain)
 		wo = WO_none;
 	mdev->write_ordering = wo;
-	if (pwo != mdev->write_ordering || wo == WO_bio_barrier)
+	if (pwo != mdev->write_ordering || wo == WO_bdev_flush)
 		dev_info(DEV, "Method to ensure write ordering: %s\n", write_ordering_str[mdev->write_ordering]);
 }
 
@@ -1192,7 +1113,7 @@ next_bio:
 	bio->bi_sector = sector;
 	bio->bi_bdev = mdev->ldev->backing_bdev;
 	/* we special case some flags in the multi-bio case, see below
-	 * (REQ_UNPLUG, REQ_HARDBARRIER) */
+	 * (REQ_UNPLUG) */
 	bio->bi_rw = rw;
 	bio->bi_private = e;
 	bio->bi_end_io = drbd_endio_sec;
@@ -1226,11 +1147,6 @@ next_bio:
 			bio->bi_rw &= ~REQ_UNPLUG;
 
 		drbd_generic_make_request(mdev, fault_type, bio);
-
-		/* strip off REQ_HARDBARRIER,
-		 * unless it is the first or last bio */
-		if (bios && bios->bi_next)
-			bios->bi_rw &= ~REQ_HARDBARRIER;
 	} while (bios);
 	maybe_kick_lo(mdev);
 	return 0;
@@ -1244,45 +1160,9 @@ fail:
 	return -ENOMEM;
 }
 
-/**
- * w_e_reissue() - Worker callback; Resubmit a bio, without REQ_HARDBARRIER set
- * @mdev:	DRBD device.
- * @w:		work object.
- * @cancel:	The connection will be closed anyways (unused in this callback)
- */
-int w_e_reissue(struct drbd_conf *mdev, struct drbd_work *w, int cancel) __releases(local)
-{
-	struct drbd_epoch_entry *e = (struct drbd_epoch_entry *)w;
-	/* We leave DE_CONTAINS_A_BARRIER and EE_IS_BARRIER in place,
-	   (and DE_BARRIER_IN_NEXT_EPOCH_ISSUED in the previous Epoch)
-	   so that we can finish that epoch in drbd_may_finish_epoch().
-	   That is necessary if we already have a long chain of Epochs, before
-	   we realize that REQ_HARDBARRIER is actually not supported */
-
-	/* As long as the -ENOTSUPP on the barrier is reported immediately
-	   that will never trigger. If it is reported late, we will just
-	   print that warning and continue correctly for all future requests
-	   with WO_bdev_flush */
-	if (previous_epoch(mdev, e->epoch))
-		dev_warn(DEV, "Write ordering was not enforced (one time event)\n");
-
-	/* we still have a local reference,
-	 * get_ldev was done in receive_Data. */
-
-	e->w.cb = e_end_block;
-	if (drbd_submit_ee(mdev, e, WRITE, DRBD_FAULT_DT_WR) != 0) {
-		/* drbd_submit_ee fails for one reason only:
-		 * if was not able to allocate sufficient bios.
-		 * requeue, try again later. */
-		e->w.cb = w_e_reissue;
-		drbd_queue_work(&mdev->data.work, &e->w);
-	}
-	return 1;
-}
-
 static int receive_Barrier(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned int data_size)
 {
-	int rv, issue_flush;
+	int rv;
 	struct p_barrier *p = &mdev->data.rbuf.barrier;
 	struct drbd_epoch *epoch;
 
@@ -1300,44 +1180,40 @@ static int receive_Barrier(struct drbd_conf *mdev, enum drbd_packets cmd, unsign
 	 * Therefore we must send the barrier_ack after the barrier request was
 	 * completed. */
 	switch (mdev->write_ordering) {
-	case WO_bio_barrier:
 	case WO_none:
 		if (rv == FE_RECYCLED)
 			return TRUE;
-		break;
+
+		/* receiver context, in the writeout path of the other node.
+		 * avoid potential distributed deadlock */
+		epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
+		if (epoch)
+			break;
+		else
+			dev_warn(DEV, "Allocation of an epoch failed, slowing down\n");
+			/* Fall through */
 
 	case WO_bdev_flush:
 	case WO_drain_io:
-		if (rv == FE_STILL_LIVE) {
-			set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
-			drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
-			rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
-		}
-		if (rv == FE_RECYCLED)
-			return TRUE;
-
-		/* The asender will send all the ACKs and barrier ACKs out, since
-		   all EEs moved from the active_ee to the done_ee. We need to
-		   provide a new epoch object for the EEs that come in soon */
-		break;
-	}
-
-	/* receiver context, in the writeout path of the other node.
-	 * avoid potential distributed deadlock */
-	epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
-	if (!epoch) {
-		dev_warn(DEV, "Allocation of an epoch failed, slowing down\n");
-		issue_flush = !test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
 		drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
-		if (issue_flush) {
-			rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
-			if (rv == FE_RECYCLED)
-				return TRUE;
+		drbd_flush(mdev);
+
+		if (atomic_read(&mdev->current_epoch->epoch_size)) {
+			epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
+			if (epoch)
+				break;
 		}
 
-		drbd_wait_ee_list_empty(mdev, &mdev->done_ee);
+		epoch = mdev->current_epoch;
+		wait_event(mdev->ee_wait, atomic_read(&epoch->epoch_size) == 0);
+
+		D_ASSERT(atomic_read(&epoch->active) == 0);
+		D_ASSERT(epoch->flags == 0);
 
 		return TRUE;
+	default:
+		dev_err(DEV, "Strangeness in mdev->write_ordering %d\n", mdev->write_ordering);
+		return FALSE;
 	}
 
 	epoch->flags = 0;
@@ -1652,15 +1528,8 @@ static int e_end_block(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
 {
 	struct drbd_epoch_entry *e = (struct drbd_epoch_entry *)w;
 	sector_t sector = e->sector;
-	struct drbd_epoch *epoch;
 	int ok = 1, pcmd;
 
-	if (e->flags & EE_IS_BARRIER) {
-		epoch = previous_epoch(mdev, e->epoch);
-		if (epoch)
-			drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE + (cancel ? EV_CLEANUP : 0));
-	}
-
 	if (mdev->net_conf->wire_protocol == DRBD_PROT_C) {
 		if (likely((e->flags & EE_WAS_ERROR) == 0)) {
 			pcmd = (mdev->state.conn >= C_SYNC_SOURCE &&
@@ -1817,27 +1686,6 @@ static int receive_Data(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned
 	e->epoch = mdev->current_epoch;
 	atomic_inc(&e->epoch->epoch_size);
 	atomic_inc(&e->epoch->active);
-
-	if (mdev->write_ordering == WO_bio_barrier && atomic_read(&e->epoch->epoch_size) == 1) {
-		struct drbd_epoch *epoch;
-		/* Issue a barrier if we start a new epoch, and the previous epoch
-		   was not a epoch containing a single request which already was
-		   a Barrier. */
-		epoch = list_entry(e->epoch->list.prev, struct drbd_epoch, list);
-		if (epoch == e->epoch) {
-			set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags);
-			rw |= REQ_HARDBARRIER;
-			e->flags |= EE_IS_BARRIER;
-		} else {
-			if (atomic_read(&epoch->epoch_size) > 1 ||
-			    !test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags)) {
-				set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
-				set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags);
-				rw |= REQ_HARDBARRIER;
-				e->flags |= EE_IS_BARRIER;
-			}
-		}
-	}
 	spin_unlock(&mdev->epoch_lock);
 
 	dp_flags = be32_to_cpu(p->dp_flags);
diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
index 1a2d2f0759b2..b0551ba7ad0c 100644
--- a/drivers/block/drbd/drbd_worker.c
+++ b/drivers/block/drbd/drbd_worker.c
@@ -102,12 +102,6 @@ void drbd_endio_read_sec_final(struct drbd_epoch_entry *e) __releases(local)
 	put_ldev(mdev);
 }
 
-static int is_failed_barrier(int ee_flags)
-{
-	return (ee_flags & (EE_IS_BARRIER|EE_WAS_ERROR|EE_RESUBMITTED))
-			== (EE_IS_BARRIER|EE_WAS_ERROR);
-}
-
 /* writes on behalf of the partner, or resync writes,
  * "submitted" by the receiver, final stage.  */
 static void drbd_endio_write_sec_final(struct drbd_epoch_entry *e) __releases(local)
@@ -119,21 +113,6 @@ static void drbd_endio_write_sec_final(struct drbd_epoch_entry *e) __releases(lo
 	int is_syncer_req;
 	int do_al_complete_io;
 
-	/* if this is a failed barrier request, disable use of barriers,
-	 * and schedule for resubmission */
-	if (is_failed_barrier(e->flags)) {
-		drbd_bump_write_ordering(mdev, WO_bdev_flush);
-		spin_lock_irqsave(&mdev->req_lock, flags);
-		list_del(&e->w.list);
-		e->flags = (e->flags & ~EE_WAS_ERROR) | EE_RESUBMITTED;
-		e->w.cb = w_e_reissue;
-		/* put_ldev actually happens below, once we come here again. */
-		__release(local);
-		spin_unlock_irqrestore(&mdev->req_lock, flags);
-		drbd_queue_work(&mdev->data.work, &e->w);
-		return;
-	}
-
 	D_ASSERT(e->block_id != ID_VACANT);
 
 	/* after we moved e to done_ee,

From a8a4e51e6965db84d2af041370ea2ab6232aa4f1 Mon Sep 17 00:00:00 2001
From: Philipp Reisner <philipp.reisner@linbit.com>
Date: Wed, 25 Aug 2010 10:21:04 +0200
Subject: [PATCH 0019/1066] drbd: REQ_HARDBARRIER -> REQ_FUA transition for
 meta data accesses

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---
 drivers/block/drbd/drbd_actlog.c | 16 ++--------------
 drivers/block/drbd/drbd_int.h    |  7 +++----
 drivers/block/drbd/drbd_nl.c     |  4 ++--
 3 files changed, 7 insertions(+), 20 deletions(-)

diff --git a/drivers/block/drbd/drbd_actlog.c b/drivers/block/drbd/drbd_actlog.c
index bd925180a2b0..ba95cba192be 100644
--- a/drivers/block/drbd/drbd_actlog.c
+++ b/drivers/block/drbd/drbd_actlog.c
@@ -78,11 +78,10 @@ static int _drbd_md_sync_page_io(struct drbd_conf *mdev,
 	init_completion(&md_io.event);
 	md_io.error = 0;
 
-	if ((rw & WRITE) && !test_bit(MD_NO_BARRIER, &mdev->flags))
-		rw |= REQ_HARDBARRIER;
+	if ((rw & WRITE) && !test_bit(MD_NO_FUA, &mdev->flags))
+		rw |= REQ_FUA;
 	rw |= REQ_UNPLUG | REQ_SYNC;
 
- retry:
 	bio = bio_alloc(GFP_NOIO, 1);
 	bio->bi_bdev = bdev->md_bdev;
 	bio->bi_sector = sector;
@@ -100,17 +99,6 @@ static int _drbd_md_sync_page_io(struct drbd_conf *mdev,
 	wait_for_completion(&md_io.event);
 	ok = bio_flagged(bio, BIO_UPTODATE) && md_io.error == 0;
 
-	/* check for unsupported barrier op.
-	 * would rather check on EOPNOTSUPP, but that is not reliable.
-	 * don't try again for ANY return value != 0 */
-	if (unlikely((bio->bi_rw & REQ_HARDBARRIER) && !ok)) {
-		/* Try again with no barrier */
-		dev_warn(DEV, "Barriers not supported on meta data device - disabling\n");
-		set_bit(MD_NO_BARRIER, &mdev->flags);
-		rw &= ~REQ_HARDBARRIER;
-		bio_put(bio);
-		goto retry;
-	}
  out:
 	bio_put(bio);
 	return ok;
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index 1b915fd9278f..575bfba1b0da 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -835,8 +835,7 @@ enum {
 	NO_BARRIER_SUPP,	/* underlying block device doesn't implement barriers */
 	CONSIDER_RESYNC,
 
-	MD_NO_BARRIER,		/* meta data device does not support barriers,
-				   so don't even try */
+	MD_NO_FUA,		/* Users wants us to not use FUA/FLUSH on meta data dev */
 	SUSPEND_IO,		/* suspend application io */
 	BITMAP_IO,		/* suspend application io;
 				   once no more io in flight, start bitmap io */
@@ -2404,13 +2403,13 @@ static inline void drbd_md_flush(struct drbd_conf *mdev)
 {
 	int r;
 
-	if (test_bit(MD_NO_BARRIER, &mdev->flags))
+	if (test_bit(MD_NO_FUA, &mdev->flags))
 		return;
 
 	r = blkdev_issue_flush(mdev->ldev->md_bdev, GFP_KERNEL, NULL,
 			BLKDEV_IFL_WAIT);
 	if (r) {
-		set_bit(MD_NO_BARRIER, &mdev->flags);
+		set_bit(MD_NO_FUA, &mdev->flags);
 		dev_err(DEV, "meta data flush failed with status %d, disabling md-flushes\n", r);
 	}
 }
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 899878fcf97d..29e5c70e4e26 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -1103,9 +1103,9 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
 	/* Reset the "barriers don't work" bits here, then force meta data to
 	 * be written, to ensure we determine if barriers are supported. */
 	if (nbc->dc.no_md_flush)
-		set_bit(MD_NO_BARRIER, &mdev->flags);
+		set_bit(MD_NO_FUA, &mdev->flags);
 	else
-		clear_bit(MD_NO_BARRIER, &mdev->flags);
+		clear_bit(MD_NO_FUA, &mdev->flags);
 
 	/* Point of no return reached.
 	 * Devices and memory are no longer released by error cleanup below.

From 650789c87f16dcdf1dd0a67ac7461b7537534855 Mon Sep 17 00:00:00 2001
From: Philipp Reisner <philipp.reisner@linbit.com>
Date: Wed, 25 Aug 2010 10:47:17 +0200
Subject: [PATCH 0020/1066] drbd: Removed checks for REQ_HARDBARRIER on
 incomming BIOs

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---
 drivers/block/drbd/drbd_int.h  |  1 -
 drivers/block/drbd/drbd_main.c |  5 -----
 drivers/block/drbd/drbd_req.c  | 14 --------------
 3 files changed, 20 deletions(-)

diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index 575bfba1b0da..0c527d281622 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -832,7 +832,6 @@ enum {
 				 * Gets cleared when the state.conn
 				 * goes into C_CONNECTED state. */
 	WRITE_BM_AFTER_RESYNC,	/* A kmalloc() during resync failed */
-	NO_BARRIER_SUPP,	/* underlying block device doesn't implement barriers */
 	CONSIDER_RESYNC,
 
 	MD_NO_FUA,		/* Users wants us to not use FUA/FLUSH on meta data dev */
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 8e0d707df23d..d7072bf0630d 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -2788,11 +2788,6 @@ void drbd_init_set_defaults(struct drbd_conf *mdev)
 
 	drbd_set_defaults(mdev);
 
-	/* for now, we do NOT yet support it,
-	 * even though we start some framework
-	 * to eventually support barriers */
-	set_bit(NO_BARRIER_SUPP, &mdev->flags);
-
 	atomic_set(&mdev->ap_bio_cnt, 0);
 	atomic_set(&mdev->ap_pending_cnt, 0);
 	atomic_set(&mdev->rs_pending_cnt, 0);
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index 5c2254853559..11a75d32a2e2 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -1032,20 +1032,6 @@ int drbd_make_request_26(struct request_queue *q, struct bio *bio)
 		return 0;
 	}
 
-	/* Reject barrier requests if we know the underlying device does
-	 * not support them.
-	 * XXX: Need to get this info from peer as well some how so we
-	 * XXX: reject if EITHER side/data/metadata area does not support them.
-	 *
-	 * because of those XXX, this is not yet enabled,
-	 * i.e. in drbd_init_set_defaults we set the NO_BARRIER_SUPP bit.
-	 */
-	if (unlikely(bio->bi_rw & REQ_HARDBARRIER) && test_bit(NO_BARRIER_SUPP, &mdev->flags)) {
-		/* dev_warn(DEV, "Rejecting barrier request as underlying device does not support\n"); */
-		bio_endio(bio, -EOPNOTSUPP);
-		return 0;
-	}
-
 	/*
 	 * what we "blindly" assume:
 	 */

From afa842fa641e11a025725883b04d1e144e6bad39 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Fri, 22 Oct 2010 14:21:07 -0500
Subject: [PATCH 0021/1066] cciss: fix board status waiting code

After a reset, we should first wait for the board to become "not ready",
and then wait for it to become "ready", instead of immediately
waiting for it to become "ready", and do this waiting *after*
restoring PCI config space registers.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 drivers/block/cciss.c | 43 +++++++++++++++++++++++++++++++++++--------
 drivers/block/cciss.h |  4 ++++
 2 files changed, 39 insertions(+), 8 deletions(-)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index f09e6df15aa7..fd08644bf2a0 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4006,18 +4006,31 @@ static int __devinit cciss_pci_find_memory_BAR(struct pci_dev *pdev,
 	return -ENODEV;
 }
 
-static int __devinit cciss_wait_for_board_ready(ctlr_info_t *h)
+static int __devinit cciss_wait_for_board_state(struct pci_dev *pdev,
+	void __iomem *vaddr, int wait_for_ready)
+#define BOARD_READY 1
+#define BOARD_NOT_READY 0
 {
-	int i;
+	int i, iterations;
 	u32 scratchpad;
 
-	for (i = 0; i < CCISS_BOARD_READY_ITERATIONS; i++) {
-		scratchpad = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
-		if (scratchpad == CCISS_FIRMWARE_READY)
-			return 0;
+	if (wait_for_ready)
+		iterations = CCISS_BOARD_READY_ITERATIONS;
+	else
+		iterations = CCISS_BOARD_NOT_READY_ITERATIONS;
+
+	for (i = 0; i < iterations; i++) {
+		scratchpad = readl(vaddr + SA5_SCRATCHPAD_OFFSET);
+		if (wait_for_ready) {
+			if (scratchpad == CCISS_FIRMWARE_READY)
+				return 0;
+		} else {
+			if (scratchpad != CCISS_FIRMWARE_READY)
+				return 0;
+		}
 		msleep(CCISS_BOARD_READY_POLL_INTERVAL_MSECS);
 	}
-	dev_warn(&h->pdev->dev, "board not ready, timed out.\n");
+	dev_warn(&pdev->dev, "board not ready, timed out.\n");
 	return -ENODEV;
 }
 
@@ -4183,7 +4196,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *h)
 		err = -ENOMEM;
 		goto err_out_free_res;
 	}
-	err = cciss_wait_for_board_ready(h);
+	err = cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
 	if (err)
 		goto err_out_free_res;
 	err = cciss_find_cfgtables(h);
@@ -4534,6 +4547,20 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
 	   need a little pause here */
 	msleep(CCISS_POST_RESET_PAUSE_MSECS);
 
+	/* Wait for board to become not ready, then ready. */
+	dev_info(&pdev->dev, "Waiting for board to become ready.\n");
+	rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY);
+	if (rc) /* Don't bail, might be E500, etc. which can't be reset */
+		dev_warn(&pdev->dev,
+			"failed waiting for board to become not ready\n");
+	rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_READY);
+	if (rc) {
+		dev_warn(&pdev->dev,
+			"failed waiting for board to become ready\n");
+		goto unmap_cfgtable;
+	}
+	dev_info(&pdev->dev, "board ready.\n");
+
 	/* Controller should be in simple mode at this point.  If it's not,
 	 * It means we're on one of those controllers which doesn't support
 	 * the doorbell reset method and on which the PCI power management reset
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index ae340ffc8f81..4b8933d778f1 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -200,10 +200,14 @@ struct ctlr_info
  * the above.
  */
 #define CCISS_BOARD_READY_WAIT_SECS (120)
+#define CCISS_BOARD_NOT_READY_WAIT_SECS (10)
 #define CCISS_BOARD_READY_POLL_INTERVAL_MSECS (100)
 #define CCISS_BOARD_READY_ITERATIONS \
 	((CCISS_BOARD_READY_WAIT_SECS * 1000) / \
 		CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
+#define CCISS_BOARD_NOT_READY_ITERATIONS \
+	((CCISS_BOARD_NOT_READY_WAIT_SECS * 1000) / \
+		CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
 #define CCISS_POST_RESET_PAUSE_MSECS (3000)
 #define CCISS_POST_RESET_NOOP_INTERVAL_MSECS (1000)
 #define CCISS_POST_RESET_NOOP_RETRIES (12)

From f442e64b93e16dba6bf9ab7e8dc5a90f6bcd8a85 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Fri, 22 Oct 2010 14:21:12 -0500
Subject: [PATCH 0022/1066] cciss: Use kernel provided PCI state save and
 restore functions

and use the doorbell reset method if available (which doesn't
lock up the controller if you properly save and restore all
the PCI registers that you're supposed to.)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 drivers/block/cciss.c | 73 +++++++++----------------------------------
 1 file changed, 15 insertions(+), 58 deletions(-)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index fd08644bf2a0..2e547bddc5a7 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4361,36 +4361,6 @@ static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, u
 #define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)
 #define cciss_noop(p) cciss_message(p, 3, 0)
 
-static __devinit int cciss_reset_msi(struct pci_dev *pdev)
-{
-/* the #defines are stolen from drivers/pci/msi.h. */
-#define msi_control_reg(base)		(base + PCI_MSI_FLAGS)
-#define PCI_MSIX_FLAGS_ENABLE		(1 << 15)
-
-	int pos;
-	u16 control = 0;
-
-	pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
-	if (pos) {
-		pci_read_config_word(pdev, msi_control_reg(pos), &control);
-		if (control & PCI_MSI_FLAGS_ENABLE) {
-			dev_info(&pdev->dev, "resetting MSI\n");
-			pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE);
-		}
-	}
-
-	pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
-	if (pos) {
-		pci_read_config_word(pdev, msi_control_reg(pos), &control);
-		if (control & PCI_MSIX_FLAGS_ENABLE) {
-			dev_info(&pdev->dev, "resetting MSI-X\n");
-			pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE);
-		}
-	}
-
-	return 0;
-}
-
 static int cciss_controller_hard_reset(struct pci_dev *pdev,
 	void * __iomem vaddr, bool use_doorbell)
 {
@@ -4445,17 +4415,17 @@ static int cciss_controller_hard_reset(struct pci_dev *pdev,
  * states or using the doorbell register. */
 static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
 {
-	u16 saved_config_space[32];
 	u64 cfg_offset;
 	u32 cfg_base_addr;
 	u64 cfg_base_addr_index;
 	void __iomem *vaddr;
 	unsigned long paddr;
 	u32 misc_fw_support, active_transport;
-	int rc, i;
+	int rc;
 	CfgTable_struct __iomem *cfgtable;
 	bool use_doorbell;
 	u32 board_id;
+	u16 command_register;
 
 	/* For controllers as old a the p600, this is very nearly
 	 * the same thing as
@@ -4465,14 +4435,6 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
 	 * pci_set_power_state(pci_dev, PCI_D0);
 	 * pci_restore_state(pci_dev);
 	 *
-	 * but we can't use these nice canned kernel routines on
-	 * kexec, because they also check the MSI/MSI-X state in PCI
-	 * configuration space and do the wrong thing when it is
-	 * set/cleared.  Also, the pci_save/restore_state functions
-	 * violate the ordering requirements for restoring the
-	 * configuration space from the CCISS document (see the
-	 * comment below).  So we roll our own ....
-	 *
 	 * For controllers newer than the P600, the pci power state
 	 * method of resetting doesn't work so we have another way
 	 * using the doorbell register.
@@ -4491,8 +4453,13 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
 		return -ENODEV;
 	}
 
-	for (i = 0; i < 32; i++)
-		pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
+	/* Save the PCI command register */
+	pci_read_config_word(pdev, 4, &command_register);
+	/* Turn the board off.  This is so that later pci_restore_state()
+	 * won't turn the board on before the rest of config space is ready.
+	 */
+	pci_disable_device(pdev);
+	pci_save_state(pdev);
 
 	/* find the first memory BAR, so we can find the cfg table */
 	rc = cciss_pci_find_memory_BAR(pdev, &paddr);
@@ -4527,21 +4494,13 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
 	rc = cciss_controller_hard_reset(pdev, vaddr, use_doorbell);
 	if (rc)
 		goto unmap_cfgtable;
-
-	/* Restore the PCI configuration space.  The Open CISS
-	 * Specification says, "Restore the PCI Configuration
-	 * Registers, offsets 00h through 60h. It is important to
-	 * restore the command register, 16-bits at offset 04h,
-	 * last. Do not restore the configuration status register,
-	 * 16-bits at offset 06h."  Note that the offset is 2*i.
-	 */
-	for (i = 0; i < 32; i++) {
-		if (i == 2 || i == 3)
-			continue;
-		pci_write_config_word(pdev, 2*i, saved_config_space[i]);
+	pci_restore_state(pdev);
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_warn(&pdev->dev, "failed to enable device.\n");
+		goto unmap_cfgtable;
 	}
-	wmb();
-	pci_write_config_word(pdev, 4, saved_config_space[2]);
+	pci_write_config_word(pdev, 4, command_register);
 
 	/* Some devices (notably the HP Smart Array 5i Controller)
 	   need a little pause here */
@@ -4601,8 +4560,6 @@ static __devinit int cciss_init_reset_devices(struct pci_dev *pdev)
 		return 0; /* just try to do the kdump anyhow. */
 	if (rc)
 		return -ENODEV;
-	if (cciss_reset_msi(pdev))
-		return -ENODEV;
 
 	/* Now try to get the controller to respond to a no-op */
 	for (i = 0; i < CCISS_POST_RESET_NOOP_RETRIES; i++) {

From 186fb9cf6a1154bc9b071adfd72fcf256285eb26 Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Fri, 22 Oct 2010 14:21:17 -0500
Subject: [PATCH 0023/1066] cciss: limit commands allocated on reset_devices

This is to conserve memory in a memory-limited kdump scenario

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 drivers/block/cciss.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 2e547bddc5a7..9e761b994b4c 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4079,6 +4079,11 @@ static int __devinit cciss_find_cfgtables(ctlr_info_t *h)
 static void __devinit cciss_get_max_perf_mode_cmds(struct ctlr_info *h)
 {
 	h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+
+	/* Limit commands in memory limited kdump scenario. */
+	if (reset_devices && h->max_commands > 32)
+		h->max_commands = 32;
+
 	if (h->max_commands < 16) {
 		dev_warn(&h->pdev->dev, "Controller reports "
 			"max supported commands of %d, an obvious lie. "

From 332c2f80a894d349bfb95fae00daf74477d4afcd Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Fri, 22 Oct 2010 14:21:22 -0500
Subject: [PATCH 0024/1066] cciss: use usleep_range not msleep for small sleeps

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 drivers/block/cciss.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 9e761b994b4c..c792a6080d51 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3785,7 +3785,7 @@ static void __devinit cciss_wait_for_mode_change_ack(ctlr_info_t *h)
 	for (i = 0; i < MAX_CONFIG_WAIT; i++) {
 		if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
 			break;
-		msleep(10);
+		usleep_range(10000, 20000);
 	}
 }
 

From 4205df34003eec4371020872cdfa228ffae5bd6a Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Sat, 23 Oct 2010 18:47:31 +0200
Subject: [PATCH 0025/1066] cciss: remove controllers supported by hpsa

We would prefer not to have any overlap between the two drivers.
Remove the cciss_allow_hpsa option, as it it is no longer needed.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 drivers/block/cciss.c | 45 ++++---------------------------------------
 1 file changed, 4 insertions(+), 41 deletions(-)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index c792a6080d51..39631cbccaf8 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -66,11 +66,6 @@ MODULE_VERSION("3.6.26");
 MODULE_LICENSE("GPL");
 
 static DEFINE_MUTEX(cciss_mutex);
-static int cciss_allow_hpsa;
-module_param(cciss_allow_hpsa, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(cciss_allow_hpsa,
-	"Prevent cciss driver from accessing hardware known to be "
-	" supported by the hpsa driver");
 
 #include "cciss_cmd.h"
 #include "cciss.h"
@@ -98,19 +93,6 @@ static const struct pci_device_id cciss_pci_device_id[] = {
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3215},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3237},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x323D},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3241},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3243},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3245},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3247},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3249},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x324A},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x324B},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3350},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3351},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3352},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3353},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3354},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3355},
 	{0,}
 };
 
@@ -131,6 +113,8 @@ static struct board_type products[] = {
 	{0x409D0E11, "Smart Array 6400 EM", &SA5_access},
 	{0x40910E11, "Smart Array 6i", &SA5_access},
 	{0x3225103C, "Smart Array P600", &SA5_access},
+	{0x3223103C, "Smart Array P800", &SA5_access},
+	{0x3234103C, "Smart Array P400", &SA5_access},
 	{0x3235103C, "Smart Array P400i", &SA5_access},
 	{0x3211103C, "Smart Array E200i", &SA5_access},
 	{0x3212103C, "Smart Array E200", &SA5_access},
@@ -138,24 +122,7 @@ static struct board_type products[] = {
 	{0x3214103C, "Smart Array E200i", &SA5_access},
 	{0x3215103C, "Smart Array E200i", &SA5_access},
 	{0x3237103C, "Smart Array E500", &SA5_access},
-/* controllers below this line are also supported by the hpsa driver. */
-#define HPSA_BOUNDARY 0x3223103C
-	{0x3223103C, "Smart Array P800", &SA5_access},
-	{0x3234103C, "Smart Array P400", &SA5_access},
-	{0x323D103C, "Smart Array P700m", &SA5_access},
-	{0x3241103C, "Smart Array P212", &SA5_access},
-	{0x3243103C, "Smart Array P410", &SA5_access},
-	{0x3245103C, "Smart Array P410i", &SA5_access},
-	{0x3247103C, "Smart Array P411", &SA5_access},
-	{0x3249103C, "Smart Array P812", &SA5_access},
-	{0x324A103C, "Smart Array P712m", &SA5_access},
-	{0x324B103C, "Smart Array P711m", &SA5_access},
-	{0x3350103C, "Smart Array", &SA5_access},
-	{0x3351103C, "Smart Array", &SA5_access},
-	{0x3352103C, "Smart Array", &SA5_access},
-	{0x3353103C, "Smart Array", &SA5_access},
-	{0x3354103C, "Smart Array", &SA5_access},
-	{0x3355103C, "Smart Array", &SA5_access},
+	{0x323d103c, "Smart Array P700M", &SA5_access},
 };
 
 /* How long to wait (in milliseconds) for board to go into simple mode */
@@ -3969,13 +3936,9 @@ static int __devinit cciss_lookup_board_id(struct pci_dev *pdev, u32 *board_id)
 	*board_id = ((subsystem_device_id << 16) & 0xffff0000) |
 			subsystem_vendor_id;
 
-	for (i = 0; i < ARRAY_SIZE(products); i++) {
-		/* Stand aside for hpsa driver on request */
-		if (cciss_allow_hpsa && products[i].board_id == HPSA_BOUNDARY)
-			return -ENODEV;
+	for (i = 0; i < ARRAY_SIZE(products); i++)
 		if (*board_id == products[i].board_id)
 			return i;
-	}
 	dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x, ignoring.\n",
 		*board_id);
 	return -ENODEV;

From 14bd342e25ea0242369c229d33075348171b622b Mon Sep 17 00:00:00 2001
From: Nicolas Kaiser <nikai@nikai.net>
Date: Mon, 25 Oct 2010 19:25:42 -0400
Subject: [PATCH 0026/1066] crypto: n2 - dubious error check

Looks like a copy-and-paste problem to me.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 drivers/crypto/n2_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/n2_core.c b/drivers/crypto/n2_core.c
index 88ee01510ec0..76141262ea1d 100644
--- a/drivers/crypto/n2_core.c
+++ b/drivers/crypto/n2_core.c
@@ -1832,7 +1832,7 @@ static int __devinit get_irq_props(struct mdesc_handle *mdesc, u64 node,
 		return -ENODEV;
 
 	ino = mdesc_get_property(mdesc, node, "ino", &ino_len);
-	if (!intr)
+	if (!ino)
 		return -ENODEV;
 
 	if (intr_len != ino_len)

From dd2b379f071424f36f9f90ff83cb4ad058c7b6ed Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 26 Oct 2010 17:14:36 +0100
Subject: [PATCH 0027/1066] drm/i915: Fix typo from "Enable DisplayPort Audio"

Hi,

while I looked through your changes in drm-intel git tree (as I've got
a pressure for supporting DisplayPort audio), I stumbled on the
possible bug in the commit a9756bb5b25d5d997df0c5d8c95db01292191bea

	Author: Zhenyu Wang <zhenyuw@linux.intel.com>
	Date:   Sun Sep 19 13:09:06 2010 +0800
	drm/i915: Enable DisplayPort audio

In this commit, you changed the return value of g4x_dp_detect()
to "bit", but it should be "status", I suppose.

[ickle: mea culpa.]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31094
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_dp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 891f4f1d63b1..c8e005553310 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1517,7 +1517,7 @@ g4x_dp_detect(struct intel_dp *intel_dp)
 			status = connector_status_connected;
 	}
 
-	return bit;
+	return status;
 }
 
 /**

From 8f28f54aad8bcf52a47afb6447fac34f96597b6f Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Wed, 27 Oct 2010 23:17:25 +0200
Subject: [PATCH 0028/1066] i915: signedness bug in check_overlay_src()

"depth" should be signed in case packed_depth_bytes() returns -EINVAL.

This probably doesn't make a difference at runtime.  In the original
code we would return -EINVAL later if (rec->offset_Y % 4294967274) is
non-zero.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_overlay.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c
index afb96d25219a..02ff0a481f47 100644
--- a/drivers/gpu/drm/i915/intel_overlay.c
+++ b/drivers/gpu/drm/i915/intel_overlay.c
@@ -946,7 +946,9 @@ static int check_overlay_src(struct drm_device *dev,
 {
 	int uv_hscale = uv_hsubsampling(rec->flags);
 	int uv_vscale = uv_vsubsampling(rec->flags);
-	u32 stride_mask, depth, tmp;
+	u32 stride_mask;
+	int depth;
+	u32 tmp;
 
 	/* check src dimensions */
 	if (IS_845G(dev) || IS_I830(dev)) {

From 2f56f56ad991edd51ffd0baf1182245ee1277a04 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Wed, 27 Oct 2010 20:59:49 -0700
Subject: [PATCH 0029/1066] Revert "ceph: update issue_seq on cap grant"

This reverts commit d91f2438d881514e4a923fd786dbd94b764a9440.

The intent of issue_seq is to distinguish between mds->client messages that
(re)create the cap and those that do not, which means we should _only_ be
updating that value in the create paths.  By updating it in handle_cap_grant,
we reset it to zero, which then breaks release.

The larger question is what workload/problem made me think it should be
updated here...

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/caps.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 98ab13e2b71d..6e0942f33dd8 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -2273,8 +2273,7 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant,
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	int mds = session->s_mds;
-	unsigned seq = le32_to_cpu(grant->seq);
-	unsigned issue_seq = le32_to_cpu(grant->issue_seq);
+	int seq = le32_to_cpu(grant->seq);
 	int newcaps = le32_to_cpu(grant->caps);
 	int issued, implemented, used, wanted, dirty;
 	u64 size = le64_to_cpu(grant->size);
@@ -2286,8 +2285,8 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant,
 	int revoked_rdcache = 0;
 	int queue_invalidate = 0;
 
-	dout("handle_cap_grant inode %p cap %p mds%d seq %u/%u %s\n",
-	     inode, cap, mds, seq, issue_seq, ceph_cap_string(newcaps));
+	dout("handle_cap_grant inode %p cap %p mds%d seq %d %s\n",
+	     inode, cap, mds, seq, ceph_cap_string(newcaps));
 	dout(" size %llu max_size %llu, i_size %llu\n", size, max_size,
 		inode->i_size);
 
@@ -2383,7 +2382,6 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant,
 	}
 
 	cap->seq = seq;
-	cap->issue_seq = issue_seq;
 
 	/* file layout may have changed */
 	ci->i_layout = grant->layout;

From 6b1686a71e3158d3c5f125260effce171cc7852b Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Thu, 28 Oct 2010 12:34:21 +0200
Subject: [PATCH 0030/1066] netfilter: nf_conntrack: allow
 nf_ct_alloc_hashtable() to get highmem pages

commit ea781f197d6a8 (use SLAB_DESTROY_BY_RCU and get rid of call_rcu())
did a mistake in __vmalloc() call in nf_ct_alloc_hashtable().

I forgot to add __GFP_HIGHMEM, so pages were taken from LOWMEM only.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Patrick McHardy <kaber@trash.net>
---
 net/netfilter/nf_conntrack_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 1eacf8d9966a..27a5ea6b6a0f 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -1312,7 +1312,8 @@ void *nf_ct_alloc_hashtable(unsigned int *sizep, int *vmalloced, int nulls)
 	if (!hash) {
 		*vmalloced = 1;
 		printk(KERN_WARNING "nf_conntrack: falling back to vmalloc.\n");
-		hash = __vmalloc(sz, GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL);
+		hash = __vmalloc(sz, GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO,
+				 PAGE_KERNEL);
 	}
 
 	if (hash && nulls)

From 395b70be54bed5fdf6c4173c78e8a49f960f241d Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu, 28 Oct 2010 21:28:46 +0100
Subject: [PATCH 0031/1066] drm/i915: Flush read-only buffers from the active
 list upon idle as well

It is possible for the active list to only contain a read-only buffer so
that the ring->gpu_write_list remains entry. This leads to an
inconsistency between i915_gpu_is_active() and i915_gpu_idle() causing
an infinite spin during the shrinker and an assertion failure that
i915_gpu_idle() does indeed flush all buffers from the active lists.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_gem.c       | 10 +++-------
 drivers/gpu/drm/i915/i915_gem_evict.c |  8 ++------
 2 files changed, 5 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 8eb8453208b5..469a5b1a48aa 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2172,7 +2172,7 @@ i915_gem_object_unbind(struct drm_gem_object *obj)
 static int i915_ring_idle(struct drm_device *dev,
 			  struct intel_ring_buffer *ring)
 {
-	if (list_empty(&ring->gpu_write_list))
+	if (list_empty(&ring->gpu_write_list) && list_empty(&ring->active_list))
 		return 0;
 
 	i915_gem_flush_ring(dev, NULL, ring,
@@ -2190,9 +2190,7 @@ i915_gpu_idle(struct drm_device *dev)
 	int ret;
 
 	lists_empty = (list_empty(&dev_priv->mm.flushing_list) &&
-		       list_empty(&dev_priv->render_ring.active_list) &&
-		       list_empty(&dev_priv->bsd_ring.active_list) &&
-		       list_empty(&dev_priv->blt_ring.active_list));
+		       list_empty(&dev_priv->mm.active_list));
 	if (lists_empty)
 		return 0;
 
@@ -4900,9 +4898,7 @@ i915_gpu_is_active(struct drm_device *dev)
 	int lists_empty;
 
 	lists_empty = list_empty(&dev_priv->mm.flushing_list) &&
-		      list_empty(&dev_priv->render_ring.active_list) &&
-		      list_empty(&dev_priv->bsd_ring.active_list) &&
-		      list_empty(&dev_priv->blt_ring.active_list);
+		      list_empty(&dev_priv->mm.active_list);
 
 	return !lists_empty;
 }
diff --git a/drivers/gpu/drm/i915/i915_gem_evict.c b/drivers/gpu/drm/i915/i915_gem_evict.c
index 43a4013f53fa..d8ae7d1d0cc6 100644
--- a/drivers/gpu/drm/i915/i915_gem_evict.c
+++ b/drivers/gpu/drm/i915/i915_gem_evict.c
@@ -165,9 +165,7 @@ i915_gem_evict_everything(struct drm_device *dev)
 
 	lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
 		       list_empty(&dev_priv->mm.flushing_list) &&
-		       list_empty(&dev_priv->render_ring.active_list) &&
-		       list_empty(&dev_priv->bsd_ring.active_list) &&
-		       list_empty(&dev_priv->blt_ring.active_list));
+		       list_empty(&dev_priv->mm.active_list));
 	if (lists_empty)
 		return -ENOSPC;
 
@@ -184,9 +182,7 @@ i915_gem_evict_everything(struct drm_device *dev)
 
 	lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
 		       list_empty(&dev_priv->mm.flushing_list) &&
-		       list_empty(&dev_priv->render_ring.active_list) &&
-		       list_empty(&dev_priv->bsd_ring.active_list) &&
-		       list_empty(&dev_priv->blt_ring.active_list));
+		       list_empty(&dev_priv->mm.active_list));
 	BUG_ON(!lists_empty);
 
 	return 0;

From 46bc85872040ae7a98b983514bf79f68255b2643 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 29 Oct 2010 18:42:22 +0900
Subject: [PATCH 0032/1066] sh: mach-microdev: SuperIO-relative ioport mapping.

The microdev only has to contend with silly PIO mangling on anything
within the SuperIO range. As each of the SuperIO modules is already
speciail cased, we just shift that logic over to the ioport map.

With microdev PCI never being merged (and being fudamentally broken in
hardware), and the ethernet chip only doing 16-bit accesses already,
there's no need to maintain any of the extra special casing. Kill it all
off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-microdev/io.c           | 246 +-------------------
 arch/sh/boards/mach-microdev/setup.c        |  23 +-
 arch/sh/include/mach-common/mach/microdev.h |   9 -
 3 files changed, 3 insertions(+), 275 deletions(-)

diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c
index 2960c659020e..acdafb0c6404 100644
--- a/arch/sh/boards/mach-microdev/io.c
+++ b/arch/sh/boards/mach-microdev/io.c
@@ -54,7 +54,7 @@
 /*
  * map I/O ports to memory-mapped addresses
  */
-static unsigned long microdev_isa_port2addr(unsigned long offset)
+void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
 {
 	unsigned long result;
 
@@ -72,16 +72,6 @@ static unsigned long microdev_isa_port2addr(unsigned long offset)
 			 *	Configuration Registers
 			 */
 		result = IO_SUPERIO_PHYS + (offset << 1);
-#if 0
-	} else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
-		   offset == KBD_STATUS_REG) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
-			 */
-	        result = IO_SUPERIO_PHYS + (offset << 1);
-#endif
 	} else if (((offset >= IO_IDE1_BASE) &&
 		    (offset <  IO_IDE1_BASE + IO_IDE_EXTENT)) ||
 		    (offset == IO_IDE1_MISC)) {
@@ -131,237 +121,5 @@ static unsigned long microdev_isa_port2addr(unsigned long offset)
 		result = PVR;
 	}
 
-	return result;
-}
-
-#define PORT2ADDR(x) (microdev_isa_port2addr(x))
-
-static inline void delay(void)
-{
-#if defined(CONFIG_PCI)
-	/* System board present, just make a dummy SRAM access.  (CS0 will be
-	   mapped to PCI memory, probably good to avoid it.) */
-	__raw_readw(0xa6800000);
-#else
-	/* CS0 will be mapped to flash, ROM etc so safe to access it. */
-	__raw_readw(0xa0000000);
-#endif
-}
-
-unsigned char microdev_inb(unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO)
-		return microdev_pci_inb(port);
-#endif
-	return *(volatile unsigned char*)PORT2ADDR(port);
-}
-
-unsigned short microdev_inw(unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO)
-		return microdev_pci_inw(port);
-#endif
-	return *(volatile unsigned short*)PORT2ADDR(port);
-}
-
-unsigned int microdev_inl(unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO)
-		return microdev_pci_inl(port);
-#endif
-	return *(volatile unsigned int*)PORT2ADDR(port);
-}
-
-void microdev_outw(unsigned short b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO) {
-		microdev_pci_outw(b, port);
-		return;
-	}
-#endif
-	*(volatile unsigned short*)PORT2ADDR(port) = b;
-}
-
-void microdev_outb(unsigned char b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO) {
-		microdev_pci_outb(b, port);
-		return;
-	}
-#endif
-
-	/*
-	 *	There is a board feature with the current SH4-202 MicroDev in
-	 *	that the 2 byte enables (nBE0 and nBE1) are tied together (and
-	 *	to the Chip Select Line (Ethernet_CS)). Due to this connectivity,
-	 *	it is not possible to safely perform 8-bit writes to the
-	 *	Ethernet registers, as 16-bits will be consumed from the Data
-	 *	lines (corrupting the other byte).  Hence, this function is
-	 *	written to implement 16-bit read/modify/write for all byte-wide
-	 *	accesses.
-	 *
-	 *	Note: there is no problem with byte READS (even or odd).
-	 *
-	 *			Sean McGoogan - 16th June 2003.
-	 */
-	if ((port >= IO_LAN91C111_BASE) &&
-	    (port <  IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
-			/*
-			 * Then are trying to perform a byte-write to the
-			 * LAN91C111.  This needs special care.
-			 */
-		if (port % 2 == 1) {	/* is the port odd ? */
-			/* unset bit-0, i.e. make even */
-			const unsigned long evenPort = port-1;
-			unsigned short word;
-
-			/*
-			 * do a 16-bit read/write to write to 'port',
-			 * preserving even byte.
-			 *
-			 *	Even addresses are bits 0-7
-			 *	Odd  addresses are bits 8-15
-			 */
-			word = microdev_inw(evenPort);
-			word = (word & 0xffu) | (b << 8);
-			microdev_outw(word, evenPort);
-		} else {
-			/* else, we are trying to do an even byte write */
-			unsigned short word;
-
-			/*
-			 * do a 16-bit read/write to write to 'port',
-			 * preserving odd byte.
-			 *
-			 *	Even addresses are bits 0-7
-			 *	Odd  addresses are bits 8-15
-			 */
-			word = microdev_inw(port);
-			word = (word & 0xff00u) | (b);
-			microdev_outw(word, port);
-		}
-	} else {
-		*(volatile unsigned char*)PORT2ADDR(port) = b;
-	}
-}
-
-void microdev_outl(unsigned int b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO) {
-		microdev_pci_outl(b, port);
-		return;
-	}
-#endif
-	*(volatile unsigned int*)PORT2ADDR(port) = b;
-}
-
-unsigned char microdev_inb_p(unsigned long port)
-{
-	unsigned char v = microdev_inb(port);
-	delay();
-	return v;
-}
-
-unsigned short microdev_inw_p(unsigned long port)
-{
-	unsigned short v = microdev_inw(port);
-	delay();
-	return v;
-}
-
-unsigned int microdev_inl_p(unsigned long port)
-{
-	unsigned int v = microdev_inl(port);
-	delay();
-	return v;
-}
-
-void microdev_outb_p(unsigned char b, unsigned long port)
-{
-	microdev_outb(b, port);
-	delay();
-}
-
-void microdev_outw_p(unsigned short b, unsigned long port)
-{
-	microdev_outw(b, port);
-	delay();
-}
-
-void microdev_outl_p(unsigned int b, unsigned long port)
-{
-	microdev_outl(b, port);
-	delay();
-}
-
-void microdev_insb(unsigned long port, void *buffer, unsigned long count)
-{
-	volatile unsigned char *port_addr;
-	unsigned char *buf = buffer;
-
-	port_addr = (volatile unsigned char *)PORT2ADDR(port);
-
-	while (count--)
-		*buf++ = *port_addr;
-}
-
-void microdev_insw(unsigned long port, void *buffer, unsigned long count)
-{
-	volatile unsigned short *port_addr;
-	unsigned short *buf = buffer;
-
-	port_addr = (volatile unsigned short *)PORT2ADDR(port);
-
-	while (count--)
-		*buf++ = *port_addr;
-}
-
-void microdev_insl(unsigned long port, void *buffer, unsigned long count)
-{
-	volatile unsigned long *port_addr;
-	unsigned int *buf = buffer;
-
-	port_addr = (volatile unsigned long *)PORT2ADDR(port);
-
-	while (count--)
-		*buf++ = *port_addr;
-}
-
-void microdev_outsb(unsigned long port, const void *buffer, unsigned long count)
-{
-	volatile unsigned char *port_addr;
-	const unsigned char *buf = buffer;
-
-	port_addr = (volatile unsigned char *)PORT2ADDR(port);
-
-	while (count--)
-		*port_addr = *buf++;
-}
-
-void microdev_outsw(unsigned long port, const void *buffer, unsigned long count)
-{
-	volatile unsigned short *port_addr;
-	const unsigned short *buf = buffer;
-
-	port_addr = (volatile unsigned short *)PORT2ADDR(port);
-
-	while (count--)
-		*port_addr = *buf++;
-}
-
-void microdev_outsl(unsigned long port, const void *buffer, unsigned long count)
-{
-	volatile unsigned long *port_addr;
-	const unsigned int *buf = buffer;
-
-	port_addr = (volatile unsigned long *)PORT2ADDR(port);
-
-	while (count--)
-		*port_addr = *buf++;
+	return (void __iomem *)result;
 }
diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
index d1df2a4fb9b8..d8a747291e03 100644
--- a/arch/sh/boards/mach-microdev/setup.c
+++ b/arch/sh/boards/mach-microdev/setup.c
@@ -195,27 +195,6 @@ device_initcall(microdev_devices_setup);
 static struct sh_machine_vector mv_sh4202_microdev __initmv = {
 	.mv_name		= "SH4-202 MicroDev",
 	.mv_nr_irqs		= 72,
-
-	.mv_inb			= microdev_inb,
-	.mv_inw			= microdev_inw,
-	.mv_inl			= microdev_inl,
-	.mv_outb		= microdev_outb,
-	.mv_outw		= microdev_outw,
-	.mv_outl		= microdev_outl,
-
-	.mv_inb_p		= microdev_inb_p,
-	.mv_inw_p		= microdev_inw_p,
-	.mv_inl_p		= microdev_inl_p,
-	.mv_outb_p		= microdev_outb_p,
-	.mv_outw_p		= microdev_outw_p,
-	.mv_outl_p		= microdev_outl_p,
-
-	.mv_insb		= microdev_insb,
-	.mv_insw		= microdev_insw,
-	.mv_insl		= microdev_insl,
-	.mv_outsb		= microdev_outsb,
-	.mv_outsw		= microdev_outsw,
-	.mv_outsl		= microdev_outsl,
-
+	.mv_ioport_map		= microdev_ioport_map,
 	.mv_init_irq		= init_microdev_irq,
 };
diff --git a/arch/sh/include/mach-common/mach/microdev.h b/arch/sh/include/mach-common/mach/microdev.h
index 1aed15856e11..dcb05fa8c164 100644
--- a/arch/sh/include/mach-common/mach/microdev.h
+++ b/arch/sh/include/mach-common/mach/microdev.h
@@ -68,13 +68,4 @@ extern void microdev_print_fpga_intc_status(void);
 #define __IO_PREFIX microdev
 #include <asm/io_generic.h>
 
-#if defined(CONFIG_PCI)
-unsigned char  microdev_pci_inb(unsigned long port);
-unsigned short microdev_pci_inw(unsigned long port);
-unsigned long  microdev_pci_inl(unsigned long port);
-void           microdev_pci_outb(unsigned char  data, unsigned long port);
-void           microdev_pci_outw(unsigned short data, unsigned long port);
-void           microdev_pci_outl(unsigned long  data, unsigned long port);
-#endif
-
 #endif /* __ASM_SH_MICRODEV_H */

From 39c11984a4f36bd1ce7f90f7506824955f0f4863 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 29 Oct 2010 18:59:58 +0900
Subject: [PATCH 0033/1066] sh: mach-snapgear: Rip out superfluous PIO
 routines.

None of these PIO routines do anything other than basic error checking,
get rid of them and use the generic fallbacks.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-snapgear/Makefile       |   2 +-
 arch/sh/boards/mach-snapgear/io.c           | 121 --------------------
 arch/sh/boards/mach-snapgear/setup.c        |  36 ++----
 arch/sh/include/mach-common/mach/snapgear.h |  22 ----
 4 files changed, 11 insertions(+), 170 deletions(-)
 delete mode 100644 arch/sh/boards/mach-snapgear/io.c

diff --git a/arch/sh/boards/mach-snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile
index d2d2f4b6a502..bc92e34adbb0 100644
--- a/arch/sh/boards/mach-snapgear/Makefile
+++ b/arch/sh/boards/mach-snapgear/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the SnapGear specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o
+obj-y	 := setup.o
diff --git a/arch/sh/boards/mach-snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c
deleted file mode 100644
index 476650e42dbc..000000000000
--- a/arch/sh/boards/mach-snapgear/io.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-
-#ifdef CONFIG_SH_SECUREEDGE5410
-unsigned short secureedge5410_ioport;
-#endif
-
-static inline volatile __u16 *port2adr(unsigned int port)
-{
-	maybebadio((unsigned long)port);
-	return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char snapgear_inb(unsigned long port)
-{
-	if (PXSEG(port))
-		return *(volatile unsigned char *)port;
-	else
-		return (*port2adr(port)) & 0xff;
-}
-
-unsigned char snapgear_inb_p(unsigned long port)
-{
-	unsigned char v;
-
-	if (PXSEG(port))
-		v = *(volatile unsigned char *)port;
-	else
-		v = (*port2adr(port))&0xff;
-	ctrl_delay();
-	return v;
-}
-
-unsigned short snapgear_inw(unsigned long port)
-{
-	if (PXSEG(port))
-		return *(volatile unsigned short *)port;
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int snapgear_inl(unsigned long port)
-{
-	if (PXSEG(port))
-		return *(volatile unsigned long *)port;
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-void snapgear_outb(unsigned char value, unsigned long port)
-{
-
-	if (PXSEG(port))
-		*(volatile unsigned char *)port = value;
-	else
-		*(port2adr(port)) = value;
-}
-
-void snapgear_outb_p(unsigned char value, unsigned long port)
-{
-	if (PXSEG(port))
-		*(volatile unsigned char *)port = value;
-	else
-		*(port2adr(port)) = value;
-	ctrl_delay();
-}
-
-void snapgear_outw(unsigned short value, unsigned long port)
-{
-	if (PXSEG(port))
-		*(volatile unsigned short *)port = value;
-	else if (port >= 0x2000)
-		*port2adr(port) = value;
-	else
-		maybebadio(port);
-}
-
-void snapgear_outl(unsigned int value, unsigned long port)
-{
-	if (PXSEG(port))
-		*(volatile unsigned long *)port = value;
-	else
-		maybebadio(port);
-}
-
-void snapgear_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
-void snapgear_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c
index 331745dee379..10eeea96a04b 100644
--- a/arch/sh/boards/mach-snapgear/setup.c
+++ b/arch/sh/boards/mach-snapgear/setup.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/sh/boards/snapgear/setup.c
- *
  * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
  * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
  *
@@ -24,13 +22,14 @@
 #include <asm/io.h>
 #include <cpu/timer.h>
 
+unsigned short secureedge5410_ioport;
+
 /*
  * EraseConfig handling functions
  */
-
 static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
 {
-	(void)__raw_readb(0xb8000000);	/* dummy read */
+	ctrl_delay();	/* dummy read */
 
 	printk("SnapGear: erase switch interrupt!\n");
 
@@ -39,21 +38,22 @@ static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
 
 static int __init eraseconfig_init(void)
 {
+	unsigned int irq = evt2irq(0x240);
+
 	printk("SnapGear: EraseConfig init\n");
+
 	/* Setup "EraseConfig" switch on external IRQ 0 */
-	if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
+	if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED,
 				"Erase Config", NULL))
 		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
-				IRL0_IRQ);
+				irq);
 	else
 		printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
-				IRL0_IRQ);
-	return(0);
+				irq);
+	return 0;
 }
-
 module_init(eraseconfig_init);
 
-/****************************************************************************/
 /*
  * Initialize IRQ setting
  *
@@ -62,7 +62,6 @@ module_init(eraseconfig_init);
  * IRL2 = eth1
  * IRL3 = crypto
  */
-
 static void __init init_snapgear_IRQ(void)
 {
 	printk("Setup SnapGear IRQ/IPR ...\n");
@@ -76,20 +75,5 @@ static void __init init_snapgear_IRQ(void)
 static struct sh_machine_vector mv_snapgear __initmv = {
 	.mv_name		= "SnapGear SecureEdge5410",
 	.mv_nr_irqs		= 72,
-
-	.mv_inb			= snapgear_inb,
-	.mv_inw			= snapgear_inw,
-	.mv_inl			= snapgear_inl,
-	.mv_outb		= snapgear_outb,
-	.mv_outw		= snapgear_outw,
-	.mv_outl		= snapgear_outl,
-
-	.mv_inb_p		= snapgear_inb_p,
-	.mv_inw_p		= snapgear_inw,
-	.mv_inl_p		= snapgear_inl,
-	.mv_outb_p		= snapgear_outb_p,
-	.mv_outw_p		= snapgear_outw,
-	.mv_outl_p		= snapgear_outl,
-
 	.mv_init_irq		= init_snapgear_IRQ,
 };
diff --git a/arch/sh/include/mach-common/mach/snapgear.h b/arch/sh/include/mach-common/mach/snapgear.h
index 042d95f51c4d..3653b9a4bacc 100644
--- a/arch/sh/include/mach-common/mach/snapgear.h
+++ b/arch/sh/include/mach-common/mach/snapgear.h
@@ -12,30 +12,9 @@
 #ifndef _ASM_SH_IO_SNAPGEAR_H
 #define _ASM_SH_IO_SNAPGEAR_H
 
-#if defined(CONFIG_CPU_SH4)
-/*
- * The external interrupt lines, these take up ints 0 - 15 inclusive
- * depending on the priority for the interrupt.  In fact the priority
- * is the interrupt :-)
- */
-
-#define IRL0_IRQ	2
-#define IRL0_PRIORITY	13
-
-#define IRL1_IRQ	5
-#define IRL1_PRIORITY	10
-
-#define IRL2_IRQ	8
-#define IRL2_PRIORITY	7
-
-#define IRL3_IRQ	11
-#define IRL3_PRIORITY	4
-#endif
-
 #define __IO_PREFIX	snapgear
 #include <asm/io_generic.h>
 
-#ifdef CONFIG_SH_SECUREEDGE5410
 /*
  * We need to remember what was written to the ioport as some bits
  * are shared with other functions and you cannot read back what was
@@ -66,6 +45,5 @@ extern unsigned short secureedge5410_ioport;
 			((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
 #define SECUREEDGE_READ_IOPORT() \
 	 ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
-#endif
 
 #endif /* _ASM_SH_IO_SNAPGEAR_H */

From f6eec8d66400714e47add3d8341688a1e86c5de9 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 29 Oct 2010 19:06:53 +0900
Subject: [PATCH 0034/1066] sh: mach-snapgear: Kill off machtype, consolidate
 board def.

Only the secureedge5410 was ever supported by this code, so make the
board specification explicit rather than perpetuating a mach group.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile                                             | 1 -
 arch/sh/boards/Makefile                                      | 1 +
 .../boards/{mach-snapgear/setup.c => board-secureedge5410.c} | 2 +-
 arch/sh/boards/mach-snapgear/Makefile                        | 5 -----
 .../configs/{snapgear_defconfig => secureedge5410_defconfig} | 0
 .../mach-common/mach/{snapgear.h => secureedge5410.h}        | 0
 drivers/rtc/rtc-ds1302.c                                     | 2 +-
 7 files changed, 3 insertions(+), 8 deletions(-)
 rename arch/sh/boards/{mach-snapgear/setup.c => board-secureedge5410.c} (98%)
 delete mode 100644 arch/sh/boards/mach-snapgear/Makefile
 rename arch/sh/configs/{snapgear_defconfig => secureedge5410_defconfig} (100%)
 rename arch/sh/include/mach-common/mach/{snapgear.h => secureedge5410.h} (100%)

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 307b3a4a790b..194afbfb01c9 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -133,7 +133,6 @@ machdir-$(CONFIG_SOLUTION_ENGINE)		+= mach-se
 machdir-$(CONFIG_SH_HP6XX)			+= mach-hp6xx
 machdir-$(CONFIG_SH_DREAMCAST)			+= mach-dreamcast
 machdir-$(CONFIG_SH_SH03)			+= mach-sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410)		+= mach-snapgear
 machdir-$(CONFIG_SH_RTS7751R2D)			+= mach-r2d
 machdir-$(CONFIG_SH_7751_SYSTEMH)		+= mach-systemh
 machdir-$(CONFIG_SH_EDOSK7705)			+= mach-edosk7705
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index 38ef655cc0f0..4a0ed86af8b1 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -2,6 +2,7 @@
 # Specific board support, not covered by a mach group.
 #
 obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
+obj-$(CONFIG_SH_SECUREEDGE5410)	+= board-secureedge5410.o
 obj-$(CONFIG_SH_SH2007)		+= board-sh2007.o
 obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
 obj-$(CONFIG_SH_URQUELL)	+= board-urquell.o
diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/board-secureedge5410.c
similarity index 98%
rename from arch/sh/boards/mach-snapgear/setup.c
rename to arch/sh/boards/board-secureedge5410.c
index 10eeea96a04b..32f875e8493d 100644
--- a/arch/sh/boards/mach-snapgear/setup.c
+++ b/arch/sh/boards/board-secureedge5410.c
@@ -17,7 +17,7 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <asm/machvec.h>
-#include <mach/snapgear.h>
+#include <mach/secureedge5410.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <cpu/timer.h>
diff --git a/arch/sh/boards/mach-snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile
deleted file mode 100644
index bc92e34adbb0..000000000000
--- a/arch/sh/boards/mach-snapgear/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the SnapGear specific parts of the kernel
-#
-
-obj-y	 := setup.o
diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/secureedge5410_defconfig
similarity index 100%
rename from arch/sh/configs/snapgear_defconfig
rename to arch/sh/configs/secureedge5410_defconfig
diff --git a/arch/sh/include/mach-common/mach/snapgear.h b/arch/sh/include/mach-common/mach/secureedge5410.h
similarity index 100%
rename from arch/sh/include/mach-common/mach/snapgear.h
rename to arch/sh/include/mach-common/mach/secureedge5410.h
diff --git a/drivers/rtc/rtc-ds1302.c b/drivers/rtc/rtc-ds1302.c
index 359d1e04626c..f0d638922644 100644
--- a/drivers/rtc/rtc-ds1302.c
+++ b/drivers/rtc/rtc-ds1302.c
@@ -35,7 +35,7 @@
 
 #ifdef CONFIG_SH_SECUREEDGE5410
 #include <asm/rtc.h>
-#include <mach/snapgear.h>
+#include <mach/secureedge5410.h>
 
 #define	RTC_RESET	0x1000
 #define	RTC_IODATA	0x0800

From 2504075d383fcefd746dac42a0cd1c3bdc006bd1 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 29 Oct 2010 19:11:56 +0900
Subject: [PATCH 0035/1066] sh: mach-systemh: Kill off dead board.

This code has been untouched since it was merged many years ago, and has
severely bitrotted since, suggesting that the board has no real users
left. Notice of intent to remove has been sent out over the last few
years, with no takers. Kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile                              |   1 -
 arch/sh/boards/Kconfig                        |   7 -
 arch/sh/boards/mach-systemh/Makefile          |  13 --
 arch/sh/boards/mach-systemh/io.c              | 158 ------------------
 arch/sh/boards/mach-systemh/irq.c             |  61 -------
 arch/sh/boards/mach-systemh/setup.c           |  57 -------
 arch/sh/configs/systemh_defconfig             |  28 ----
 .../sh/include/mach-common/mach/systemh7751.h |  71 --------
 arch/sh/tools/mach-types                      |   1 -
 9 files changed, 397 deletions(-)
 delete mode 100644 arch/sh/boards/mach-systemh/Makefile
 delete mode 100644 arch/sh/boards/mach-systemh/io.c
 delete mode 100644 arch/sh/boards/mach-systemh/irq.c
 delete mode 100644 arch/sh/boards/mach-systemh/setup.c
 delete mode 100644 arch/sh/configs/systemh_defconfig
 delete mode 100644 arch/sh/include/mach-common/mach/systemh7751.h

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 194afbfb01c9..922ff3586b12 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -134,7 +134,6 @@ machdir-$(CONFIG_SH_HP6XX)			+= mach-hp6xx
 machdir-$(CONFIG_SH_DREAMCAST)			+= mach-dreamcast
 machdir-$(CONFIG_SH_SH03)			+= mach-sh03
 machdir-$(CONFIG_SH_RTS7751R2D)			+= mach-r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH)		+= mach-systemh
 machdir-$(CONFIG_SH_EDOSK7705)			+= mach-edosk7705
 machdir-$(CONFIG_SH_HIGHLANDER)			+= mach-highlander
 machdir-$(CONFIG_SH_MIGOR)			+= mach-migor
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 9c94711aa6ca..2018c7ea4c93 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -81,13 +81,6 @@ config SH_7343_SOLUTION_ENGINE
 	  Select 7343 SolutionEngine if configuring for a Hitachi
 	  SH7343 (SH-Mobile 3AS) evaluation board.
 
-config SH_7751_SYSTEMH
-	bool "SystemH7751R"
-	depends on CPU_SUBTYPE_SH7751R
-	help
-	  Select SystemH if you are configuring for a Renesas SystemH
-	  7751R evaluation board.
-
 config SH_HP6XX
 	bool "HP6XX"
 	select SYS_SUPPORTS_APM_EMULATION
diff --git a/arch/sh/boards/mach-systemh/Makefile b/arch/sh/boards/mach-systemh/Makefile
deleted file mode 100644
index 2cc6a23d9d39..000000000000
--- a/arch/sh/boards/mach-systemh/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Makefile for the SystemH specific parts of the kernel
-#
-
-obj-y	 := setup.o irq.o io.o
-
-# XXX: This wants to be consolidated in arch/sh/drivers/pci, and more
-# importantly, with the generic sh7751_pcic_init() code. For now, we'll
-# just abuse the hell out of kbuild, because we can..
-
-obj-$(CONFIG_PCI) += pci.o
-pci-y := ../../se/7751/pci.o
-
diff --git a/arch/sh/boards/mach-systemh/io.c b/arch/sh/boards/mach-systemh/io.c
deleted file mode 100644
index 15577ff1f715..000000000000
--- a/arch/sh/boards/mach-systemh/io.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/systemh/io.c
- *
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 Systemh.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <mach/systemh7751.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-
-#define ETHER_IOMAP(adr) (0xB3000000 + (adr)) /*map to 16bits access area
-                                                of smc lan chip*/
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-	if (port >= 0x2000)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	maybebadio((unsigned long)port);
-	return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char sh7751systemh_inb(unsigned long port)
-{
-	if (PXSEG(port))
-		return *(volatile unsigned char *)port;
-	else if (port <= 0x3F1)
-		return *(volatile unsigned char *)ETHER_IOMAP(port);
-	else
-		return (*port2adr(port))&0xff;
-}
-
-unsigned char sh7751systemh_inb_p(unsigned long port)
-{
-	unsigned char v;
-
-        if (PXSEG(port))
-                v = *(volatile unsigned char *)port;
-	else if (port <= 0x3F1)
-		v = *(volatile unsigned char *)ETHER_IOMAP(port);
-	else
-		v = (*port2adr(port))&0xff;
-	ctrl_delay();
-	return v;
-}
-
-unsigned short sh7751systemh_inw(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned short *)port;
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else if (port <= 0x3F1)
-		return *(volatile unsigned int *)ETHER_IOMAP(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int sh7751systemh_inl(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned long *)port;
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else if (port <= 0x3F1)
-		return *(volatile unsigned int *)ETHER_IOMAP(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-void sh7751systemh_outb(unsigned char value, unsigned long port)
-{
-
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-	else if (port <= 0x3F1)
-		*(volatile unsigned char *)ETHER_IOMAP(port) = value;
-	else
-		*(port2adr(port)) = value;
-}
-
-void sh7751systemh_outb_p(unsigned char value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-	else if (port <= 0x3F1)
-		*(volatile unsigned char *)ETHER_IOMAP(port) = value;
-	else
-		*(port2adr(port)) = value;
-	ctrl_delay();
-}
-
-void sh7751systemh_outw(unsigned short value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned short *)port = value;
-	else if (port >= 0x2000)
-		*port2adr(port) = value;
-	else if (port <= 0x3F1)
-		*(volatile unsigned short *)ETHER_IOMAP(port) = value;
-	else
-		maybebadio(port);
-}
-
-void sh7751systemh_outl(unsigned int value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned long *)port = value;
-	else
-		maybebadio(port);
-}
-
-void sh7751systemh_insb(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned char *p = addr;
-	while (count--) *p++ = sh7751systemh_inb(port);
-}
-
-void sh7751systemh_insw(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned short *p = addr;
-	while (count--) *p++ = sh7751systemh_inw(port);
-}
-
-void sh7751systemh_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
-void sh7751systemh_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned char *p = (unsigned char*)addr;
-	while (count--) sh7751systemh_outb(*p++, port);
-}
-
-void sh7751systemh_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned short *p = (unsigned short*)addr;
-	while (count--) sh7751systemh_outw(*p++, port);
-}
-
-void sh7751systemh_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
deleted file mode 100644
index e5ee13adeff4..000000000000
--- a/arch/sh/boards/mach-systemh/irq.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/systemh/irq.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SystemH Support.
- *
- * Modified for 7751 SystemH by
- * Jonathan Short.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <mach/systemh7751.h>
-#include <asm/smc37c93x.h>
-
-/* address of external interrupt mask register
- * address must be set prior to use these (maybe in init_XXX_irq())
- * XXX : is it better to use .config than specifying it in code? */
-static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004;
-static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000;
-
-static void disable_systemh_irq(struct irq_data *data)
-{
-	unsigned long val, mask = 0x01 << 1;
-
-	/* Clear the "irq"th bit in the mask and set it in the request */
-	val = __raw_readl((unsigned long)systemh_irq_mask_register);
-	val &= ~mask;
-	__raw_writel(val, (unsigned long)systemh_irq_mask_register);
-
-	val = __raw_readl((unsigned long)systemh_irq_request_register);
-	val |= mask;
-	__raw_writel(val, (unsigned long)systemh_irq_request_register);
-}
-
-static void enable_systemh_irq(struct irq_data *data)
-{
-	unsigned long val, mask = 0x01 << 1;
-
-	/* Set "irq"th bit in the mask register */
-	val = __raw_readl((unsigned long)systemh_irq_mask_register);
-	val |= mask;
-	__raw_writel(val, (unsigned long)systemh_irq_mask_register);
-}
-
-static struct irq_chip systemh_irq_type = {
-	.name		= "SystemH Register",
-	.irq_unmask	= enable_systemh_irq,
-	.irq_mask	= disable_systemh_irq,
-};
-
-void make_systemh_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	set_irq_chip_and_handler(irq, &systemh_irq_type, handle_level_irq);
-	disable_systemh_irq(irq_get_irq_data(irq));
-}
diff --git a/arch/sh/boards/mach-systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c
deleted file mode 100644
index 219fd800a43f..000000000000
--- a/arch/sh/boards/mach-systemh/setup.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/systemh/setup.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- * Copyright (C) 2003  Paul Mundt
- *
- * Hitachi SystemH Support.
- *
- * Modified for 7751 SystemH by Jonathan Short.
- *
- * Rewritten for 2.6 by Paul Mundt.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <asm/machvec.h>
-#include <mach/systemh7751.h>
-
-extern void make_systemh_irq(unsigned int irq);
-
-/*
- * Initialize IRQ setting
- */
-static void __init sh7751systemh_init_irq(void)
-{
-	make_systemh_irq(0xb);	/* Ethernet interrupt */
-}
-
-static struct sh_machine_vector mv_7751systemh __initmv = {
-	.mv_name		= "7751 SystemH",
-	.mv_nr_irqs		= 72,
-
-	.mv_inb			= sh7751systemh_inb,
-	.mv_inw			= sh7751systemh_inw,
-	.mv_inl			= sh7751systemh_inl,
-	.mv_outb		= sh7751systemh_outb,
-	.mv_outw		= sh7751systemh_outw,
-	.mv_outl		= sh7751systemh_outl,
-
-	.mv_inb_p		= sh7751systemh_inb_p,
-	.mv_inw_p		= sh7751systemh_inw,
-	.mv_inl_p		= sh7751systemh_inl,
-	.mv_outb_p		= sh7751systemh_outb_p,
-	.mv_outw_p		= sh7751systemh_outw,
-	.mv_outl_p		= sh7751systemh_outl,
-
-	.mv_insb		= sh7751systemh_insb,
-	.mv_insw		= sh7751systemh_insw,
-	.mv_insl		= sh7751systemh_insl,
-	.mv_outsb		= sh7751systemh_outsb,
-	.mv_outsw		= sh7751systemh_outsw,
-	.mv_outsl		= sh7751systemh_outsl,
-
-	.mv_init_irq		= sh7751systemh_init_irq,
-};
diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig
deleted file mode 100644
index b58dfc505efe..000000000000
--- a/arch/sh/configs/systemh_defconfig
+++ /dev/null
@@ -1,28 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x00400000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_7751_SYSTEMH=y
-CONFIG_PREEMPT=y
-# CONFIG_STANDALONE is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=1024
-# CONFIG_INPUT is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_HW_RANDOM=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/sh/include/mach-common/mach/systemh7751.h b/arch/sh/include/mach-common/mach/systemh7751.h
deleted file mode 100644
index 4161122c84ef..000000000000
--- a/arch/sh/include/mach-common/mach/systemh7751.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef __ASM_SH_SYSTEMH_7751SYSTEMH_H
-#define __ASM_SH_SYSTEMH_7751SYSTEMH_H
-
-/*
- * linux/include/asm-sh/systemh/7751systemh.h
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SystemH support
-
- * Modified for 7751 SystemH by
- * Jonathan Short, 2002.
- */
-
-/* Box specific addresses.  */
-
-#define PA_ROM		0x00000000	/* EPROM */
-#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
-#define PA_FROM		0x01000000	/* EPROM */
-#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
-#define PA_EXT1		0x04000000
-#define PA_EXT1_SIZE	0x04000000
-#define PA_EXT2		0x08000000
-#define PA_EXT2_SIZE	0x04000000
-#define PA_SDRAM	0x0c000000
-#define PA_SDRAM_SIZE	0x04000000
-
-#define PA_EXT4		0x12000000
-#define PA_EXT4_SIZE	0x02000000
-#define PA_EXT5		0x14000000
-#define PA_EXT5_SIZE	0x04000000
-#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
-
-#define PA_DIPSW0	0xb9000000	/* Dip switch 5,6 */
-#define PA_DIPSW1	0xb9000002	/* Dip switch 7,8 */
-#define PA_LED		0xba000000	/* LED */
-#define	PA_BCR		0xbb000000	/* FPGA on the MS7751SE01 */
-
-#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
-#define MRSHPC_MODE     (PA_MRSHPC + 4)
-#define MRSHPC_OPTION   (PA_MRSHPC + 6)
-#define MRSHPC_CSR      (PA_MRSHPC + 8)
-#define MRSHPC_ISR      (PA_MRSHPC + 10)
-#define MRSHPC_ICR      (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
-#define MRSHPC_CDCR     (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define BCR_ILCRA	(PA_BCR + 0)
-#define BCR_ILCRB	(PA_BCR + 2)
-#define BCR_ILCRC	(PA_BCR + 4)
-#define BCR_ILCRD	(PA_BCR + 6)
-#define BCR_ILCRE	(PA_BCR + 8)
-#define BCR_ILCRF	(PA_BCR + 10)
-#define BCR_ILCRG	(PA_BCR + 12)
-
-#define IRQ_79C973	13
-
-#define __IO_PREFIX	sh7751systemh
-#include <asm/io_generic.h>
-
-#endif  /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 9f56eb978024..0e68465e7b50 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -26,7 +26,6 @@ HD64461			HD64461
 7724SE			SH_7724_SOLUTION_ENGINE
 7751SE			SH_7751_SOLUTION_ENGINE
 7780SE			SH_7780_SOLUTION_ENGINE
-7751SYSTEMH		SH_7751_SYSTEMH
 HP6XX			SH_HP6XX
 DREAMCAST		SH_DREAMCAST
 SNAPGEAR		SH_SECUREEDGE5410

From db2d0373fd1fe4db94587d52767388d811ee201f Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 29 Oct 2010 19:24:59 +0900
Subject: [PATCH 0036/1066] sh: mach-se: Rip out superfluous 7206 PIO routines.

The PIO trapping was only for MRSHPC and the SMC ethernet. Given that the
SMC ethernet is already properly handled and that nothing is using the
MRSHPC, none of this is needed.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7206/Makefile |   2 +-
 arch/sh/boards/mach-se/7206/io.c     | 104 ---------------------------
 arch/sh/boards/mach-se/7206/setup.c  |  15 ----
 3 files changed, 1 insertion(+), 120 deletions(-)
 delete mode 100644 arch/sh/boards/mach-se/7206/io.c

diff --git a/arch/sh/boards/mach-se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile
index 63e7ed699f39..5c9eaa0535b9 100644
--- a/arch/sh/boards/mach-se/7206/Makefile
+++ b/arch/sh/boards/mach-se/7206/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the 7206 SolutionEngine specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o irq.o
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
deleted file mode 100644
index adadc77532ee..000000000000
--- a/arch/sh/boards/mach-se/7206/io.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
- *
- * linux/arch/sh/boards/se/7206/io.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * I/O routine for Hitachi 7206 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <mach-se/mach/se7206.h>
-
-
-static inline void delay(void)
-{
-	__raw_readw(0x20000000);  /* P2 ROM Area */
-}
-
-/* MS7750 requires special versions of in*, out* routines, since
-   PC-like io ports are located at upper half byte of 16-bit word which
-   can be accessed only with 16-bit wide.  */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-	if (port >= 0x2000 && port < 0x2020)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	else if (port >= 0x300 && port < 0x310)
-		return (volatile __u16 *) (PA_SMSC + (port - 0x300));
-
-	return (volatile __u16 *)port;
-}
-
-unsigned char se7206_inb(unsigned long port)
-{
-	return (*port2adr(port)) & 0xff;
-}
-
-unsigned char se7206_inb_p(unsigned long port)
-{
-	unsigned long v;
-
-	v = (*port2adr(port)) & 0xff;
-	delay();
-	return v;
-}
-
-unsigned short se7206_inw(unsigned long port)
-{
-	return *port2adr(port);
-}
-
-void se7206_outb(unsigned char value, unsigned long port)
-{
-	*(port2adr(port)) = value;
-}
-
-void se7206_outb_p(unsigned char value, unsigned long port)
-{
-	*(port2adr(port)) = value;
-	delay();
-}
-
-void se7206_outw(unsigned short value, unsigned long port)
-{
-	*port2adr(port) = value;
-}
-
-void se7206_insb(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u8 *ap = addr;
-
-	while (count--)
-		*ap++ = *p;
-}
-
-void se7206_insw(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u16 *ap = addr;
-	while (count--)
-		*ap++ = *p;
-}
-
-void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u8 *ap = addr;
-
-	while (count--)
-		*p = *ap++;
-}
-
-void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u16 *ap = addr;
-	while (count--)
-		*p = *ap++;
-}
diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
index 8f5c65d43d1d..7f4871c71a01 100644
--- a/arch/sh/boards/mach-se/7206/setup.c
+++ b/arch/sh/boards/mach-se/7206/setup.c
@@ -86,20 +86,5 @@ __initcall(se7206_devices_setup);
 static struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
 	.mv_nr_irqs		= 256,
-	.mv_inb			= se7206_inb,
-	.mv_inw			= se7206_inw,
-	.mv_outb		= se7206_outb,
-	.mv_outw		= se7206_outw,
-
-	.mv_inb_p		= se7206_inb_p,
-	.mv_inw_p		= se7206_inw,
-	.mv_outb_p		= se7206_outb_p,
-	.mv_outw_p		= se7206_outw,
-
-	.mv_insb		= se7206_insb,
-	.mv_insw		= se7206_insw,
-	.mv_outsb		= se7206_outsb,
-	.mv_outsw		= se7206_outsw,
-
 	.mv_init_irq		= init_se7206_IRQ,
 };

From c1cfed3c3a190b4ce1d5a4510d9dfd3d42176fba Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 29 Oct 2010 19:34:13 +0900
Subject: [PATCH 0037/1066] sh: mach-edosk7705: update for this century, kill
 off PIO trapping.

The only reason this board needs to do PIO trapping is for ethernet,
which happens to follow the same scheme as its bigger brother the
edosk7760. With ethernet properly supported through the platform device,
we can kill off the left over PIO abortion.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-edosk7705/Makefile |  2 +-
 arch/sh/boards/mach-edosk7705/io.c     | 71 --------------------------
 arch/sh/boards/mach-edosk7705/setup.c  | 63 +++++++++++++++++++----
 3 files changed, 54 insertions(+), 82 deletions(-)
 delete mode 100644 arch/sh/boards/mach-edosk7705/io.c

diff --git a/arch/sh/boards/mach-edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
index cd54acb51499..0cf5715a78b3 100644
--- a/arch/sh/boards/mach-edosk7705/Makefile
+++ b/arch/sh/boards/mach-edosk7705/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the EDOSK7705 specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o
+obj-y	 := setup.o
diff --git a/arch/sh/boards/mach-edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
deleted file mode 100644
index 5b9c57c43241..000000000000
--- a/arch/sh/boards/mach-edosk7705/io.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * arch/sh/boards/renesas/edosk7705/io.c
- *
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routines for Hitachi EDOSK7705 board.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <mach/edosk7705.h>
-#include <asm/addrspace.h>
-
-#define SMC_IOADDR	0xA2000000
-
-/* Map the Ethernet addresses as if it is at 0x300 - 0x320 */
-static unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
-{
-	/*
-	 * SMC91C96 registers are 4 byte aligned rather than the
-	 * usual 2 byte!
-	 */
-	if (port >= 0x300 && port < 0x320)
-		return SMC_IOADDR + ((port - 0x300) * 2);
-
-	maybebadio(port);
-	return port;
-}
-
-/* Trying to read / write bytes on odd-byte boundaries to the Ethernet
- * registers causes problems. So we bit-shift the value and read / write
- * in 2 byte chunks. Setting the low byte to 0 does not cause problems
- * now as odd byte writes are only made on the bit mask / interrupt
- * register. This may not be the case in future Mar-2003 SJD
- */
-unsigned char sh_edosk7705_inb(unsigned long port)
-{
-	if (port >= 0x300 && port < 0x320 && port & 0x01)
-		return __raw_readw(port - 1) >> 8;
-
-	return __raw_readb(sh_edosk7705_isa_port2addr(port));
-}
-
-void sh_edosk7705_outb(unsigned char value, unsigned long port)
-{
-	if (port >= 0x300 && port < 0x320 && port & 0x01) {
-		__raw_writew(((unsigned short)value << 8), port - 1);
-		return;
-	}
-
-	__raw_writeb(value, sh_edosk7705_isa_port2addr(port));
-}
-
-void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned char *p = addr;
-
-	while (count--)
-		*p++ = sh_edosk7705_inb(port);
-}
-
-void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned char *p = (unsigned char *)addr;
-
-	while (count--)
-		sh_edosk7705_outb(*p++, port);
-}
diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
index d59225e26fb9..8f93b6636900 100644
--- a/arch/sh/boards/mach-edosk7705/setup.c
+++ b/arch/sh/boards/mach-edosk7705/setup.c
@@ -10,27 +10,70 @@
  */
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <asm/machvec.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smc91x.h>
 #include <mach/edosk7705.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+#define SMC_IOBASE	0xA2000000
+#define SMC_IO_OFFSET	0x300
+#define SMC_IOADDR	(SMC_IOBASE + SMC_IO_OFFSET)
+
+#define ETHERNET_IRQ	0x09
 
 static void __init sh_edosk7705_init_irq(void)
 {
-	/* This is the Ethernet interrupt */
-	make_imask_irq(0x09);
+	make_imask_irq(ETHERNET_IRQ);
 }
 
+/* eth initialization functions */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static struct resource smc91x_res[] = {
+	[0] = {
+		.start	= SMC_IOADDR,
+		.end	= SMC_IOADDR + SZ_32 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= ETHERNET_IRQ,
+		.end	= ETHERNET_IRQ,
+		.flags	= IORESOURCE_IRQ ,
+	}
+};
+
+static struct platform_device smc91x_dev = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_res),
+	.resource	= smc91x_res,
+
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+/* platform init code */
+static struct platform_device *edosk7705_devices[] __initdata = {
+	&smc91x_dev,
+};
+
+static int __init init_edosk7705_devices(void)
+{
+	return platform_add_devices(edosk7705_devices,
+				    ARRAY_SIZE(edosk7705_devices));
+}
+__initcall(init_edosk7705_devices);
+
 /*
  * The Machine Vector
  */
 static struct sh_machine_vector mv_edosk7705 __initmv = {
 	.mv_name		= "EDOSK7705",
 	.mv_nr_irqs		= 80,
-
-	.mv_inb			= sh_edosk7705_inb,
-	.mv_outb		= sh_edosk7705_outb,
-
-	.mv_insb		= sh_edosk7705_insb,
-	.mv_outsb		= sh_edosk7705_outsb,
-
 	.mv_init_irq		= sh_edosk7705_init_irq,
 };

From c819cc732267d6e46833a8d98bd7677b3d12d7d1 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 29 Oct 2010 19:38:19 +0900
Subject: [PATCH 0038/1066] sh: mach-edosk7705: Kill off machtype, consolidate
 board def.

Trivial shuffling and tidying.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile                                           | 1 -
 arch/sh/boards/Makefile                                    | 1 +
 .../boards/{mach-edosk7705/setup.c => board-edosk7705.c}   | 1 -
 arch/sh/boards/mach-edosk7705/Makefile                     | 5 -----
 arch/sh/include/mach-common/mach/edosk7705.h               | 7 -------
 5 files changed, 1 insertion(+), 14 deletions(-)
 rename arch/sh/boards/{mach-edosk7705/setup.c => board-edosk7705.c} (98%)
 delete mode 100644 arch/sh/boards/mach-edosk7705/Makefile
 delete mode 100644 arch/sh/include/mach-common/mach/edosk7705.h

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 922ff3586b12..9c8c6e1a2a15 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -134,7 +134,6 @@ machdir-$(CONFIG_SH_HP6XX)			+= mach-hp6xx
 machdir-$(CONFIG_SH_DREAMCAST)			+= mach-dreamcast
 machdir-$(CONFIG_SH_SH03)			+= mach-sh03
 machdir-$(CONFIG_SH_RTS7751R2D)			+= mach-r2d
-machdir-$(CONFIG_SH_EDOSK7705)			+= mach-edosk7705
 machdir-$(CONFIG_SH_HIGHLANDER)			+= mach-highlander
 machdir-$(CONFIG_SH_MIGOR)			+= mach-migor
 machdir-$(CONFIG_SH_AP325RXA)			+= mach-ap325rxa
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index 4a0ed86af8b1..be7d11d04b26 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_SH_SH2007)		+= board-sh2007.o
 obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
 obj-$(CONFIG_SH_URQUELL)	+= board-urquell.o
 obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
+obj-$(CONFIG_SH_EDOSK7705)	+= board-edosk7705.o
 obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o
 obj-$(CONFIG_SH_ESPT)		+= board-espt.o
 obj-$(CONFIG_SH_POLARIS)	+= board-polaris.o
diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/board-edosk7705.c
similarity index 98%
rename from arch/sh/boards/mach-edosk7705/setup.c
rename to arch/sh/boards/board-edosk7705.c
index 8f93b6636900..4cb3bb74c36f 100644
--- a/arch/sh/boards/mach-edosk7705/setup.c
+++ b/arch/sh/boards/board-edosk7705.c
@@ -13,7 +13,6 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/smc91x.h>
-#include <mach/edosk7705.h>
 #include <asm/machvec.h>
 #include <asm/sizes.h>
 
diff --git a/arch/sh/boards/mach-edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
deleted file mode 100644
index 0cf5715a78b3..000000000000
--- a/arch/sh/boards/mach-edosk7705/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the EDOSK7705 specific parts of the kernel
-#
-
-obj-y	 := setup.o
diff --git a/arch/sh/include/mach-common/mach/edosk7705.h b/arch/sh/include/mach-common/mach/edosk7705.h
deleted file mode 100644
index efc43b323466..000000000000
--- a/arch/sh/include/mach-common/mach/edosk7705.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_SH_EDOSK7705_H
-#define __ASM_SH_EDOSK7705_H
-
-#define __IO_PREFIX sh_edosk7705
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_EDOSK7705_H */

From 1e789887f3449661be9826f61d48018a1cfcbfcc Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 29 Oct 2010 19:48:21 +0900
Subject: [PATCH 0039/1066] sh: mach-se: Rip out superfluous 770x PIO routines.

Platform data takes care of all of these these days, kill them off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/770x/Makefile |   2 +-
 arch/sh/boards/mach-se/770x/io.c     | 156 ---------------------------
 arch/sh/boards/mach-se/770x/setup.c  |  22 ----
 3 files changed, 1 insertion(+), 179 deletions(-)
 delete mode 100644 arch/sh/boards/mach-se/770x/io.c

diff --git a/arch/sh/boards/mach-se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile
index 8e624b06d5ea..43ea14feef51 100644
--- a/arch/sh/boards/mach-se/770x/Makefile
+++ b/arch/sh/boards/mach-se/770x/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the 770x SolutionEngine specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o irq.o
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c
deleted file mode 100644
index 28833c8786ea..000000000000
--- a/arch/sh/boards/mach-se/770x/io.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * I/O routine for Hitachi SolutionEngine.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <mach-se/mach/se.h>
-
-/* MS7750 requires special versions of in*, out* routines, since
-   PC-like io ports are located at upper half byte of 16-bit word which
-   can be accessed only with 16-bit wide.  */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-	if (port & 0xff000000)
-		return ( volatile __u16 *) port;
-	if (port >= 0x2000)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	else if (port >= 0x1000)
-		return (volatile __u16 *) (PA_83902 + (port << 1));
-	else
-		return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-}
-
-static inline int
-shifted_port(unsigned long port)
-{
-	/* For IDE registers, value is not shifted */
-	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
-		return 0;
-	else
-		return 1;
-}
-
-unsigned char se_inb(unsigned long port)
-{
-	if (shifted_port(port))
-		return (*port2adr(port) >> 8);
-	else
-		return (*port2adr(port))&0xff;
-}
-
-unsigned char se_inb_p(unsigned long port)
-{
-	unsigned long v;
-
-	if (shifted_port(port))
-		v = (*port2adr(port) >> 8);
-	else
-		v = (*port2adr(port))&0xff;
-	ctrl_delay();
-	return v;
-}
-
-unsigned short se_inw(unsigned long port)
-{
-	if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int se_inl(unsigned long port)
-{
-	maybebadio(port);
-	return 0;
-}
-
-void se_outb(unsigned char value, unsigned long port)
-{
-	if (shifted_port(port))
-		*(port2adr(port)) = value << 8;
-	else
-		*(port2adr(port)) = value;
-}
-
-void se_outb_p(unsigned char value, unsigned long port)
-{
-	if (shifted_port(port))
-		*(port2adr(port)) = value << 8;
-	else
-		*(port2adr(port)) = value;
-	ctrl_delay();
-}
-
-void se_outw(unsigned short value, unsigned long port)
-{
-	if (port >= 0x2000)
-		*port2adr(port) = value;
-	else
-		maybebadio(port);
-}
-
-void se_outl(unsigned int value, unsigned long port)
-{
-	maybebadio(port);
-}
-
-void se_insb(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u8 *ap = addr;
-
-	if (shifted_port(port)) {
-		while (count--)
-			*ap++ = *p >> 8;
-	} else {
-		while (count--)
-			*ap++ = *p;
-	}
-}
-
-void se_insw(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u16 *ap = addr;
-	while (count--)
-		*ap++ = *p;
-}
-
-void se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
-void se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u8 *ap = addr;
-
-	if (shifted_port(port)) {
-		while (count--)
-			*p = *ap++ << 8;
-	} else {
-		while (count--)
-			*p = *ap++;
-	}
-}
-
-void se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u16 *ap = addr;
-
-	while (count--)
-		*p = *ap++;
-}
-
-void se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
index 66d39d1b0901..31330c65c0ce 100644
--- a/arch/sh/boards/mach-se/770x/setup.c
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -195,27 +195,5 @@ static struct sh_machine_vector mv_se __initmv = {
 #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 	.mv_nr_irqs             = 104,
 #endif
-
-	.mv_inb			= se_inb,
-	.mv_inw			= se_inw,
-	.mv_inl			= se_inl,
-	.mv_outb		= se_outb,
-	.mv_outw		= se_outw,
-	.mv_outl		= se_outl,
-
-	.mv_inb_p		= se_inb_p,
-	.mv_inw_p		= se_inw,
-	.mv_inl_p		= se_inl,
-	.mv_outb_p		= se_outb_p,
-	.mv_outw_p		= se_outw,
-	.mv_outl_p		= se_outl,
-
-	.mv_insb		= se_insb,
-	.mv_insw		= se_insw,
-	.mv_insl		= se_insl,
-	.mv_outsb		= se_outsb,
-	.mv_outsw		= se_outsw,
-	.mv_outsl		= se_outsl,
-
 	.mv_init_irq		= init_se_IRQ,
 };

From e2781ac2a63011dd883e94c07eb086e6f2a5f521 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 29 Oct 2010 19:52:07 +0900
Subject: [PATCH 0040/1066] sh: mach-se: Rip out superfluous 7751 PIO routines.

MRSHPC is wholly unused here, no need to trap it specially. If support is
added in the future it can be taken care of via platform data like on the
others.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7751/Makefile |   2 +-
 arch/sh/boards/mach-se/7751/io.c     | 119 ---------------------------
 arch/sh/boards/mach-se/7751/setup.c  |  18 ----
 3 files changed, 1 insertion(+), 138 deletions(-)
 delete mode 100644 arch/sh/boards/mach-se/7751/io.c

diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
index e6f4341bfe6e..a338fd9d5039 100644
--- a/arch/sh/boards/mach-se/7751/Makefile
+++ b/arch/sh/boards/mach-se/7751/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the 7751 SolutionEngine specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o irq.o
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c
deleted file mode 100644
index 6e75bd4459e5..000000000000
--- a/arch/sh/boards/mach-se/7751/io.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <mach-se/mach/se7751.h>
-#include <asm/addrspace.h>
-
-static inline volatile u16 *port2adr(unsigned int port)
-{
-	if (port >= 0x2000)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	maybebadio((unsigned long)port);
-	return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char sh7751se_inb(unsigned long port)
-{
-	if (PXSEG(port))
-		return *(volatile unsigned char *)port;
-	else
-		return (*port2adr(port)) & 0xff;
-}
-
-unsigned char sh7751se_inb_p(unsigned long port)
-{
-	unsigned char v;
-
-        if (PXSEG(port))
-                v = *(volatile unsigned char *)port;
-	else
-		v = (*port2adr(port)) & 0xff;
-	ctrl_delay();
-	return v;
-}
-
-unsigned short sh7751se_inw(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned short *)port;
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int sh7751se_inl(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned long *)port;
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-void sh7751se_outb(unsigned char value, unsigned long port)
-{
-
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-	else
-		*(port2adr(port)) = value;
-}
-
-void sh7751se_outb_p(unsigned char value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-	else
-		*(port2adr(port)) = value;
-	ctrl_delay();
-}
-
-void sh7751se_outw(unsigned short value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned short *)port = value;
-	else if (port >= 0x2000)
-		*port2adr(port) = value;
-	else
-		maybebadio(port);
-}
-
-void sh7751se_outl(unsigned int value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned long *)port = value;
-	else
-		maybebadio(port);
-}
-
-void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
-void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c
index 50572512e3e8..9fbc51beb181 100644
--- a/arch/sh/boards/mach-se/7751/setup.c
+++ b/arch/sh/boards/mach-se/7751/setup.c
@@ -56,23 +56,5 @@ __initcall(se7751_devices_setup);
 static struct sh_machine_vector mv_7751se __initmv = {
 	.mv_name		= "7751 SolutionEngine",
 	.mv_nr_irqs		= 72,
-
-	.mv_inb			= sh7751se_inb,
-	.mv_inw			= sh7751se_inw,
-	.mv_inl			= sh7751se_inl,
-	.mv_outb		= sh7751se_outb,
-	.mv_outw		= sh7751se_outw,
-	.mv_outl		= sh7751se_outl,
-
-	.mv_inb_p		= sh7751se_inb_p,
-	.mv_inw_p		= sh7751se_inw,
-	.mv_inl_p		= sh7751se_inl,
-	.mv_outb_p		= sh7751se_outb_p,
-	.mv_outw_p		= sh7751se_outw,
-	.mv_outl_p		= sh7751se_outl,
-
-	.mv_insl		= sh7751se_insl,
-	.mv_outsl		= sh7751se_outsl,
-
 	.mv_init_irq		= init_7751se_IRQ,
 };

From 64e46749224aa658d8fc0d37ea83ab20b1d7955d Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Fri, 29 Oct 2010 16:28:07 +0200
Subject: [PATCH 0041/1066] netfilter: nf_nat: fix compiler warning with
 CONFIG_NF_CT_NETLINK=n

net/ipv4/netfilter/nf_nat_core.c:52: warning: 'nf_nat_proto_find_get' defined but not used
net/ipv4/netfilter/nf_nat_core.c:66: warning: 'nf_nat_proto_put' defined but not used

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
---
 net/ipv4/netfilter/nf_nat_core.c | 40 ++++++++++++++++----------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c
index 295c97431e43..c04787ce1a71 100644
--- a/net/ipv4/netfilter/nf_nat_core.c
+++ b/net/ipv4/netfilter/nf_nat_core.c
@@ -47,26 +47,6 @@ __nf_nat_proto_find(u_int8_t protonum)
 	return rcu_dereference(nf_nat_protos[protonum]);
 }
 
-static const struct nf_nat_protocol *
-nf_nat_proto_find_get(u_int8_t protonum)
-{
-	const struct nf_nat_protocol *p;
-
-	rcu_read_lock();
-	p = __nf_nat_proto_find(protonum);
-	if (!try_module_get(p->me))
-		p = &nf_nat_unknown_protocol;
-	rcu_read_unlock();
-
-	return p;
-}
-
-static void
-nf_nat_proto_put(const struct nf_nat_protocol *p)
-{
-	module_put(p->me);
-}
-
 /* We keep an extra hash for each conntrack, for fast searching. */
 static inline unsigned int
 hash_by_src(const struct net *net, u16 zone,
@@ -588,6 +568,26 @@ static struct nf_ct_ext_type nat_extend __read_mostly = {
 #include <linux/netfilter/nfnetlink.h>
 #include <linux/netfilter/nfnetlink_conntrack.h>
 
+static const struct nf_nat_protocol *
+nf_nat_proto_find_get(u_int8_t protonum)
+{
+	const struct nf_nat_protocol *p;
+
+	rcu_read_lock();
+	p = __nf_nat_proto_find(protonum);
+	if (!try_module_get(p->me))
+		p = &nf_nat_unknown_protocol;
+	rcu_read_unlock();
+
+	return p;
+}
+
+static void
+nf_nat_proto_put(const struct nf_nat_protocol *p)
+{
+	module_put(p->me);
+}
+
 static const struct nla_policy protonat_nla_policy[CTA_PROTONAT_MAX+1] = {
 	[CTA_PROTONAT_PORT_MIN]	= { .type = NLA_U16 },
 	[CTA_PROTONAT_PORT_MAX]	= { .type = NLA_U16 },

From d817d29d0b37290d90b3a9e2a61162f1dbf2be4f Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Fri, 29 Oct 2010 19:59:40 +0200
Subject: [PATCH 0042/1066] netfilter: fix nf_conntrack_l4proto_register()

While doing __rcu annotations work on net/netfilter I found following
bug. On some arches, it is possible we publish a table while its content
is not yet committed to memory, and lockless reader can dereference wild
pointer.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
---
 net/netfilter/nf_conntrack_proto.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/netfilter/nf_conntrack_proto.c b/net/netfilter/nf_conntrack_proto.c
index ed6d92958023..dc7bb74110df 100644
--- a/net/netfilter/nf_conntrack_proto.c
+++ b/net/netfilter/nf_conntrack_proto.c
@@ -292,6 +292,12 @@ int nf_conntrack_l4proto_register(struct nf_conntrack_l4proto *l4proto)
 
 		for (i = 0; i < MAX_NF_CT_PROTO; i++)
 			proto_array[i] = &nf_conntrack_l4proto_generic;
+
+		/* Before making proto_array visible to lockless readers,
+		 * we must make sure its content is committed to memory.
+		 */
+		smp_wmb();
+
 		nf_ct_protos[l4proto->l3proto] = proto_array;
 	} else if (nf_ct_protos[l4proto->l3proto][l4proto->l4proto] !=
 					&nf_conntrack_l4proto_generic) {

From 313e74412105c670ff8900ec8099a3a5df1fa83c Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segooon@gmail.com>
Date: Thu, 28 Oct 2010 15:39:02 +0400
Subject: [PATCH 0043/1066] xen: xenfs: privcmd: check put_user() return code

put_user() may fail.  In this case propagate error code from
privcmd_ioctl_mmap_batch().

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/xenfs/privcmd.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/xen/xenfs/privcmd.c b/drivers/xen/xenfs/privcmd.c
index f80be7f6eb95..2eb04c842511 100644
--- a/drivers/xen/xenfs/privcmd.c
+++ b/drivers/xen/xenfs/privcmd.c
@@ -266,9 +266,7 @@ static int mmap_return_errors(void *data, void *state)
 	xen_pfn_t *mfnp = data;
 	struct mmap_batch_state *st = state;
 
-	put_user(*mfnp, st->user++);
-
-	return 0;
+	return put_user(*mfnp, st->user++);
 }
 
 static struct vm_operations_struct privcmd_vm_ops;
@@ -323,10 +321,8 @@ static long privcmd_ioctl_mmap_batch(void __user *udata)
 	up_write(&mm->mmap_sem);
 
 	if (state.err > 0) {
-		ret = 0;
-
 		state.user = m.arr;
-		traverse_pages(m.num, sizeof(xen_pfn_t),
+		ret = traverse_pages(m.num, sizeof(xen_pfn_t),
 			       &pagelist,
 			       mmap_return_errors, &state);
 	}

From a2d771c036eb8c040683089ca04c36dfb93a0e60 Mon Sep 17 00:00:00 2001
From: Ian Campbell <ian.campbell@citrix.com>
Date: Fri, 29 Oct 2010 16:56:19 +0100
Subject: [PATCH 0044/1066] xen: correct size of level2_kernel_pgt

sizeof(pmd_t *) is 4 bytes on 32-bit PAE leading to an allocation of
only 2048 bytes. The correct size is sizeof(pmd_t) giving us a full
page allocation.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/mmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index c237b810b03f..21ed8d7f75a5 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -2126,7 +2126,7 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
 {
 	pmd_t *kernel_pmd;
 
-	level2_kernel_pgt = extend_brk(sizeof(pmd_t *) * PTRS_PER_PMD, PAGE_SIZE);
+	level2_kernel_pgt = extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
 
 	max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) +
 				  xen_start_info->nr_pt_frames * PAGE_SIZE +

From 85f7ffd5d2b320f73912b15fe8cef34bae297daf Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Mon, 25 Oct 2010 11:41:53 +0200
Subject: [PATCH 0045/1066] firewire: ohci: fix buffer overflow in AR split
 packet handling

When the controller had to split a received asynchronous packet into two
buffers, the driver tries to reassemble it by copying both parts into
the first page.  However, if size + rest > PAGE_SIZE, i.e., if the yet
unhandled packets before the split packet, the split packet itself, and
any received packets after the split packet are together larger than one
page, then the memory after the first page would get overwritten.

To fix this, do not try to copy the data of all unhandled packets at
once, but copy the possibly needed data every time when handling
a packet.

This gets rid of most of the infamous crashes and data corruptions when
using firewire-net.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.22-2.6.36 <stable@kernel.org>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (cast PAGE_SIZE to size_t)
---
 drivers/firewire/ohci.c | 35 ++++++++++++++++++++++++++++++++---
 1 file changed, 32 insertions(+), 3 deletions(-)

diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 9dcb17d51aee..5826ae333b19 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -739,7 +739,7 @@ static void ar_context_tasklet(unsigned long data)
 	d = &ab->descriptor;
 
 	if (d->res_count == 0) {
-		size_t size, rest, offset;
+		size_t size, size2, rest, pktsize, size3, offset;
 		dma_addr_t start_bus;
 		void *start;
 
@@ -756,12 +756,41 @@ static void ar_context_tasklet(unsigned long data)
 		ab = ab->next;
 		d = &ab->descriptor;
 		size = buffer + PAGE_SIZE - ctx->pointer;
+		/* valid buffer data in the next page */
 		rest = le16_to_cpu(d->req_count) - le16_to_cpu(d->res_count);
+		/* what actually fits in this page */
+		size2 = min(rest, (size_t)PAGE_SIZE - size);
 		memmove(buffer, ctx->pointer, size);
-		memcpy(buffer + size, ab->data, rest);
+		memcpy(buffer + size, ab->data, size2);
 		ctx->current_buffer = ab;
 		ctx->pointer = (void *) ab->data + rest;
-		end = buffer + size + rest;
+
+		while (size > 0) {
+			void *next = handle_ar_packet(ctx, buffer);
+			pktsize = next - buffer;
+			if (pktsize >= size) {
+				/*
+				 * We have handled all the data that was
+				 * originally in this page, so we can now
+				 * continue in the next page.
+				 */
+				buffer = next;
+				break;
+			}
+			/* move the next packet to the start of the buffer */
+			memmove(buffer, next, size + size2 - pktsize);
+			size -= pktsize;
+			/* fill up this page again */
+			size3 = min(rest - size2,
+				    (size_t)PAGE_SIZE - size - size2);
+			memcpy(buffer + size + size2,
+			       (void *) ab->data + size2, size3);
+			size2 += size3;
+		}
+
+		/* handle the packets that are fully in the next page */
+		buffer = (void *) ab->data + (buffer - (start + size));
+		end = (void *) ab->data + rest;
 
 		while (buffer < end)
 			buffer = handle_ar_packet(ctx, buffer);

From a1f805e5e73a8fe166b71c6592d3837df0cd5e2e Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Mon, 25 Oct 2010 11:42:20 +0200
Subject: [PATCH 0046/1066] firewire: ohci: fix race in AR split packet
 handling

When handling an AR buffer that has been completely filled, we assumed
that its descriptor will not be read by the controller and can be
overwritten.  However, when the last received packet happens to end at
the end of the buffer, the controller might not yet have moved on to the
next buffer and might read the branch address later.  If we overwrite
and free the page before that, the DMA context will either go dead
because of an invalid Z value, or go off into some random memory.

To fix this, ensure that the descriptor does not get overwritten by
using only the actual buffer instead of the entire page for reassembling
the split packet.  Furthermore, to avoid freeing the page too early,
move on to the next buffer only when some data in it guarantees that the
controller has moved on.

This should eliminate the remaining firewire-net problems.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.22-2.6.36 <stable@kernel.org>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/ohci.c | 35 +++++++++++++++++++++--------------
 1 file changed, 21 insertions(+), 14 deletions(-)

diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 5826ae333b19..7570b71a2453 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -750,20 +750,19 @@ static void ar_context_tasklet(unsigned long data)
 		 */
 
 		offset = offsetof(struct ar_buffer, data);
-		start = buffer = ab;
+		start = ab;
 		start_bus = le32_to_cpu(ab->descriptor.data_address) - offset;
+		buffer = ab->data;
 
 		ab = ab->next;
 		d = &ab->descriptor;
-		size = buffer + PAGE_SIZE - ctx->pointer;
+		size = start + PAGE_SIZE - ctx->pointer;
 		/* valid buffer data in the next page */
 		rest = le16_to_cpu(d->req_count) - le16_to_cpu(d->res_count);
 		/* what actually fits in this page */
-		size2 = min(rest, (size_t)PAGE_SIZE - size);
+		size2 = min(rest, (size_t)PAGE_SIZE - offset - size);
 		memmove(buffer, ctx->pointer, size);
 		memcpy(buffer + size, ab->data, size2);
-		ctx->current_buffer = ab;
-		ctx->pointer = (void *) ab->data + rest;
 
 		while (size > 0) {
 			void *next = handle_ar_packet(ctx, buffer);
@@ -782,22 +781,30 @@ static void ar_context_tasklet(unsigned long data)
 			size -= pktsize;
 			/* fill up this page again */
 			size3 = min(rest - size2,
-				    (size_t)PAGE_SIZE - size - size2);
+				    (size_t)PAGE_SIZE - offset - size - size2);
 			memcpy(buffer + size + size2,
 			       (void *) ab->data + size2, size3);
 			size2 += size3;
 		}
 
-		/* handle the packets that are fully in the next page */
-		buffer = (void *) ab->data + (buffer - (start + size));
-		end = (void *) ab->data + rest;
+		if (rest > 0) {
+			/* handle the packets that are fully in the next page */
+			buffer = (void *) ab->data +
+					(buffer - (start + offset + size));
+			end = (void *) ab->data + rest;
 
-		while (buffer < end)
-			buffer = handle_ar_packet(ctx, buffer);
+			while (buffer < end)
+				buffer = handle_ar_packet(ctx, buffer);
 
-		dma_free_coherent(ohci->card.device, PAGE_SIZE,
-				  start, start_bus);
-		ar_context_add_page(ctx);
+			ctx->current_buffer = ab;
+			ctx->pointer = end;
+
+			dma_free_coherent(ohci->card.device, PAGE_SIZE,
+					  start, start_bus);
+			ar_context_add_page(ctx);
+		} else {
+			ctx->pointer = start + PAGE_SIZE;
+		}
 	} else {
 		buffer = ctx->pointer;
 		ctx->pointer = end =

From 837596a61ba8f9bb53bb7aa27d17328ff9b2bcd5 Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Mon, 25 Oct 2010 11:42:42 +0200
Subject: [PATCH 0047/1066] firewire: ohci: avoid reallocation of AR buffers

Freeing an AR buffer page just to allocate a new page immediately
afterwards is not only a pointless effort but also dangerous because
the allocation can fail, which would result in an oops later.

Split ar_context_add_page() into two functions so that we can reuse
the old page directly.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/ohci.c | 28 ++++++++++++++++------------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 7570b71a2453..b5ba66656c6c 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -577,17 +577,11 @@ static int ohci_update_phy_reg(struct fw_card *card, int addr,
 	return ret;
 }
 
-static int ar_context_add_page(struct ar_context *ctx)
+static void ar_context_link_page(struct ar_context *ctx,
+				 struct ar_buffer *ab, dma_addr_t ab_bus)
 {
-	struct device *dev = ctx->ohci->card.device;
-	struct ar_buffer *ab;
-	dma_addr_t uninitialized_var(ab_bus);
 	size_t offset;
 
-	ab = dma_alloc_coherent(dev, PAGE_SIZE, &ab_bus, GFP_ATOMIC);
-	if (ab == NULL)
-		return -ENOMEM;
-
 	ab->next = NULL;
 	memset(&ab->descriptor, 0, sizeof(ab->descriptor));
 	ab->descriptor.control        = cpu_to_le16(DESCRIPTOR_INPUT_MORE |
@@ -606,6 +600,19 @@ static int ar_context_add_page(struct ar_context *ctx)
 
 	reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_WAKE);
 	flush_writes(ctx->ohci);
+}
+
+static int ar_context_add_page(struct ar_context *ctx)
+{
+	struct device *dev = ctx->ohci->card.device;
+	struct ar_buffer *ab;
+	dma_addr_t uninitialized_var(ab_bus);
+
+	ab = dma_alloc_coherent(dev, PAGE_SIZE, &ab_bus, GFP_ATOMIC);
+	if (ab == NULL)
+		return -ENOMEM;
+
+	ar_context_link_page(ctx, ab, ab_bus);
 
 	return 0;
 }
@@ -730,7 +737,6 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
 static void ar_context_tasklet(unsigned long data)
 {
 	struct ar_context *ctx = (struct ar_context *)data;
-	struct fw_ohci *ohci = ctx->ohci;
 	struct ar_buffer *ab;
 	struct descriptor *d;
 	void *buffer, *end;
@@ -799,9 +805,7 @@ static void ar_context_tasklet(unsigned long data)
 			ctx->current_buffer = ab;
 			ctx->pointer = end;
 
-			dma_free_coherent(ohci->card.device, PAGE_SIZE,
-					  start, start_bus);
-			ar_context_add_page(ctx);
+			ar_context_link_page(ctx, start, start_bus);
 		} else {
 			ctx->pointer = start + PAGE_SIZE;
 		}

From 693fa7792e9db9f32da9436e633976fbacd04b55 Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Mon, 25 Oct 2010 11:43:05 +0200
Subject: [PATCH 0048/1066] firewire: ohci: fix race when reading count in AR
 descriptor

If the controller is storing a split packet and therefore changing
d->res_count to zero between the two reads by the driver, we end up with
an end pointer that is not at a packet boundary, and therefore overflow
the buffer when handling the split packet.

To fix this, read the field once, atomically.  The compiler usually
merges the two reads anyway, but for correctness, we have to enforce it.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/ohci.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index b5ba66656c6c..84eb607d6c03 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -740,11 +740,13 @@ static void ar_context_tasklet(unsigned long data)
 	struct ar_buffer *ab;
 	struct descriptor *d;
 	void *buffer, *end;
+	__le16 res_count;
 
 	ab = ctx->current_buffer;
 	d = &ab->descriptor;
 
-	if (d->res_count == 0) {
+	res_count = ACCESS_ONCE(d->res_count);
+	if (res_count == 0) {
 		size_t size, size2, rest, pktsize, size3, offset;
 		dma_addr_t start_bus;
 		void *start;
@@ -812,7 +814,7 @@ static void ar_context_tasklet(unsigned long data)
 	} else {
 		buffer = ctx->pointer;
 		ctx->pointer = end =
-			(void *) ab + PAGE_SIZE - le16_to_cpu(d->res_count);
+			(void *) ab + PAGE_SIZE - le16_to_cpu(res_count);
 
 		while (buffer < end)
 			buffer = handle_ar_packet(ctx, buffer);

From 03ff858c09c81a659b2a90a08826bc0abdbb784c Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Wed, 13 Oct 2010 07:36:38 +0000
Subject: [PATCH 0049/1066] ARM: shmobile: remove sh_timer_config clk member

Now when the SH-Mobile ARM platforms have been converted
to use device name it is possible to remove "clk" from
struct sh_timer_config.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/clocksource/sh_cmt.c  | 10 +++-------
 drivers/clocksource/sh_mtu2.c | 10 +++-------
 drivers/clocksource/sh_tmu.c  | 10 +++-------
 include/linux/sh_timer.h      |  1 -
 4 files changed, 9 insertions(+), 22 deletions(-)

diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index a44611652282..d68d3aa1814b 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -616,13 +616,9 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 	/* get hold of clock */
 	p->clk = clk_get(&p->pdev->dev, "cmt_fck");
 	if (IS_ERR(p->clk)) {
-		dev_warn(&p->pdev->dev, "using deprecated clock lookup\n");
-		p->clk = clk_get(&p->pdev->dev, cfg->clk);
-		if (IS_ERR(p->clk)) {
-			dev_err(&p->pdev->dev, "cannot get clock\n");
-			ret = PTR_ERR(p->clk);
-			goto err1;
-		}
+		dev_err(&p->pdev->dev, "cannot get clock\n");
+		ret = PTR_ERR(p->clk);
+		goto err1;
 	}
 
 	if (resource_size(res) == 6) {
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index ef7a5be8a09f..40630cb98237 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -287,13 +287,9 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev)
 	/* get hold of clock */
 	p->clk = clk_get(&p->pdev->dev, "mtu2_fck");
 	if (IS_ERR(p->clk)) {
-		dev_warn(&p->pdev->dev, "using deprecated clock lookup\n");
-		p->clk = clk_get(&p->pdev->dev, cfg->clk);
-		if (IS_ERR(p->clk)) {
-			dev_err(&p->pdev->dev, "cannot get clock\n");
-			ret = PTR_ERR(p->clk);
-			goto err1;
-		}
+		dev_err(&p->pdev->dev, "cannot get clock\n");
+		ret = PTR_ERR(p->clk);
+		goto err1;
 	}
 
 	return sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev),
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index de715901b82a..36aba9923060 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -393,13 +393,9 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev)
 	/* get hold of clock */
 	p->clk = clk_get(&p->pdev->dev, "tmu_fck");
 	if (IS_ERR(p->clk)) {
-		dev_warn(&p->pdev->dev, "using deprecated clock lookup\n");
-		p->clk = clk_get(&p->pdev->dev, cfg->clk);
-		if (IS_ERR(p->clk)) {
-			dev_err(&p->pdev->dev, "cannot get clock\n");
-			ret = PTR_ERR(p->clk);
-			goto err1;
-		}
+		dev_err(&p->pdev->dev, "cannot get clock\n");
+		ret = PTR_ERR(p->clk);
+		goto err1;
 	}
 
 	return sh_tmu_register(p, (char *)dev_name(&p->pdev->dev),
diff --git a/include/linux/sh_timer.h b/include/linux/sh_timer.h
index 864bd56bd3b0..4d9dcd138315 100644
--- a/include/linux/sh_timer.h
+++ b/include/linux/sh_timer.h
@@ -5,7 +5,6 @@ struct sh_timer_config {
 	char *name;
 	long channel_offset;
 	int timer_bit;
-	char *clk;
 	unsigned long clockevent_rating;
 	unsigned long clocksource_rating;
 };

From f2ace4a5d754c07503326d66ec85bf65e03d729d Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Mon, 18 Oct 2010 03:50:39 +0000
Subject: [PATCH 0050/1066] ARM: mach-shmobile: clock-sh7372: Add FSIDIV clock
 support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/clock-sh7372.c        | 101 +++++++++++++++++++
 arch/arm/mach-shmobile/include/mach/sh7372.h |   2 +
 2 files changed, 103 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 8565aefa21fd..fe7fa1550d36 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -50,6 +50,9 @@
 #define SMSTPCR3	0xe615013c
 #define SMSTPCR4	0xe6150140
 
+#define FSIDIVA		0xFE1F8000
+#define FSIDIVB		0xFE1F8008
+
 /* Platforms must set frequency on their DV_CLKI pin */
 struct clk sh7372_dv_clki_clk = {
 };
@@ -417,6 +420,101 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
 				      fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2),
 };
 
+/* FSI DIV */
+static unsigned long fsidiv_recalc(struct clk *clk)
+{
+	unsigned long value;
+
+	value = __raw_readl(clk->mapping->base);
+
+	if ((value & 0x3) != 0x3)
+		return 0;
+
+	value >>= 16;
+	if (value < 2)
+		return 0;
+
+	return clk->parent->rate / value;
+}
+
+static long fsidiv_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk_rate_div_range_round(clk, 2, 0xffff, rate);
+}
+
+static void fsidiv_disable(struct clk *clk)
+{
+	__raw_writel(0, clk->mapping->base);
+}
+
+static int fsidiv_enable(struct clk *clk)
+{
+	unsigned long value;
+
+	value  = __raw_readl(clk->mapping->base) >> 16;
+	if (value < 2) {
+		fsidiv_disable(clk);
+		return -ENOENT;
+	}
+
+	__raw_writel((value << 16) | 0x3, clk->mapping->base);
+
+	return 0;
+}
+
+static int fsidiv_set_rate(struct clk *clk,
+			   unsigned long rate, int algo_id)
+{
+	int idx;
+
+	if (clk->parent->rate == rate) {
+		fsidiv_disable(clk);
+		return 0;
+	}
+
+	idx = (clk->parent->rate / rate) & 0xffff;
+	if (idx < 2)
+		return -ENOENT;
+
+	__raw_writel(idx << 16, clk->mapping->base);
+	return fsidiv_enable(clk);
+}
+
+static struct clk_ops fsidiv_clk_ops = {
+	.recalc		= fsidiv_recalc,
+	.round_rate	= fsidiv_round_rate,
+	.set_rate	= fsidiv_set_rate,
+	.enable		= fsidiv_enable,
+	.disable	= fsidiv_disable,
+};
+
+static struct clk_mapping sh7372_fsidiva_clk_mapping = {
+	.phys	= FSIDIVA,
+	.len	= 8,
+};
+
+struct clk sh7372_fsidiva_clk = {
+	.ops		= &fsidiv_clk_ops,
+	.parent		= &div6_reparent_clks[DIV6_FSIA], /* late install */
+	.mapping	= &sh7372_fsidiva_clk_mapping,
+};
+
+static struct clk_mapping sh7372_fsidivb_clk_mapping = {
+	.phys	= FSIDIVB,
+	.len	= 8,
+};
+
+struct clk sh7372_fsidivb_clk = {
+	.ops		= &fsidiv_clk_ops,
+	.parent		= &div6_reparent_clks[DIV6_FSIB],  /* late install */
+	.mapping	= &sh7372_fsidivb_clk_mapping,
+};
+
+static struct clk *late_main_clks[] = {
+	&sh7372_fsidiva_clk,
+	&sh7372_fsidivb_clk,
+};
+
 enum { MSTP001,
        MSTP131, MSTP130,
        MSTP129, MSTP128, MSTP127, MSTP126, MSTP125,
@@ -585,6 +683,9 @@ void __init sh7372_clock_init(void)
 	if (!ret)
 		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
+	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
+		ret = clk_register(late_main_clks[k]);
+
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index 147775a94bce..e4f9004e7103 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -464,5 +464,7 @@ extern struct clk sh7372_dv_clki_div2_clk;
 extern struct clk sh7372_pllc2_clk;
 extern struct clk sh7372_fsiack_clk;
 extern struct clk sh7372_fsibck_clk;
+extern struct clk sh7372_fsidiva_clk;
+extern struct clk sh7372_fsidivb_clk;
 
 #endif /* __ASM_SH7372_H__ */

From 2669efec085bfc02006a452e1b5930f28bab959b Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Sun, 31 Oct 2010 10:43:14 -0400
Subject: [PATCH 0051/1066] ARM: mach-shmobile: ap4evb: Add HDMI sound support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ap4evb.c | 46 ++++++++++++++++++++++++++-
 1 file changed, 45 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 46ca4d4abf91..32d9e2816e56 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -565,12 +565,50 @@ static struct platform_device *qhd_devices[] __initdata = {
 
 /* FSI */
 #define IRQ_FSI		evt2irq(0x1840)
+
+static int fsi_set_rate(int is_porta, int rate)
+{
+	struct clk *fsib_clk;
+	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+	int ret;
+
+	/* set_rate is not needed if port A */
+	if (is_porta)
+		return 0;
+
+	fsib_clk = clk_get(NULL, "fsib_clk");
+	if (IS_ERR(fsib_clk))
+		return -EINVAL;
+
+	switch (rate) {
+	case 48000:
+		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
+		clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
+		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		break;
+	default:
+		pr_err("unsupported rate in FSI2 port B\n");
+		ret = -EINVAL;
+		break;
+	}
+
+	clk_put(fsib_clk);
+
+	return ret;
+}
+
 static struct sh_fsi_platform_info fsi_info = {
 	.porta_flags = SH_FSI_BRS_INV |
 		       SH_FSI_OUT_SLAVE_MODE |
 		       SH_FSI_IN_SLAVE_MODE |
 		       SH_FSI_OFMT(PCM) |
 		       SH_FSI_IFMT(PCM),
+
+	.portb_flags = SH_FSI_BRS_INV |
+		       SH_FSI_BRM_INV |
+		       SH_FSI_LRS_INV |
+		       SH_FSI_OFMT(SPDIF),
+	.set_rate = fsi_set_rate,
 };
 
 static struct resource fsi_resources[] = {
@@ -634,6 +672,7 @@ static struct platform_device lcdc1_device = {
 static struct sh_mobile_hdmi_info hdmi_info = {
 	.lcd_chan = &sh_mobile_lcdc1_info.ch[0],
 	.lcd_dev = &lcdc1_device.dev,
+	.flags = HDMI_SND_SRC_SPDIF,
 };
 
 static struct resource hdmi_resources[] = {
@@ -992,6 +1031,7 @@ static void __init ap4evb_map_io(void)
 
 #define GPIO_PORT9CR	0xE6051009
 #define GPIO_PORT10CR	0xE605100A
+#define USCCR1		0xE6058144
 static void __init ap4evb_init(void)
 {
 	u32 srcr4;
@@ -1062,7 +1102,7 @@ static void __init ap4evb_init(void)
 	/* setup USB phy */
 	__raw_writew(0x8a0a, 0xE6058130);	/* USBCR2 */
 
-	/* enable FSI2 */
+	/* enable FSI2 port A (ak4643) */
 	gpio_request(GPIO_FN_FSIAIBT,	NULL);
 	gpio_request(GPIO_FN_FSIAILR,	NULL);
 	gpio_request(GPIO_FN_FSIAISLD,	NULL);
@@ -1079,6 +1119,10 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_PORT41, NULL);
 	gpio_direction_input(GPIO_PORT41);
 
+	/* setup FSI2 port B (HDMI) */
+	gpio_request(GPIO_FN_FSIBCK, NULL);
+	__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
+
 	/* set SPU2 clock to 119.6 MHz */
 	clk = clk_get(NULL, "spu_clk");
 	if (!IS_ERR(clk)) {

From fde459007de8ce2647beaea57b56985700edc8ac Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Sun, 31 Oct 2010 05:46:18 +0000
Subject: [PATCH 0052/1066] jme: fix panic on load

Its now illegal to call netif_stop_queue() before register_netdev()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/jme.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index d85edf3119c2..c57d9a43ceca 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -2955,11 +2955,7 @@ jme_init_one(struct pci_dev *pdev,
 	 * Tell stack that we are not ready to work until open()
 	 */
 	netif_carrier_off(netdev);
-	netif_stop_queue(netdev);
 
-	/*
-	 * Register netdev
-	 */
 	rc = register_netdev(netdev);
 	if (rc) {
 		pr_err("Cannot register net device\n");

From 636f8c6f682ee179ff39c94dc4d0be0ddd6c8cdd Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Sun, 31 Oct 2010 05:50:38 +0000
Subject: [PATCH 0053/1066] qlcnic: fix panic on load

Its now illegal to call netif_stop_queue() before register_netdev()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_main.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 7a298cdf9ab3..a3dcd04be22f 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -1450,7 +1450,6 @@ qlcnic_setup_netdev(struct qlcnic_adapter *adapter,
 	netdev->irq = adapter->msix_entries[0].vector;
 
 	netif_carrier_off(netdev);
-	netif_stop_queue(netdev);
 
 	err = register_netdev(netdev);
 	if (err) {

From 5ec1cea057495b8f10bab0c1396a9d8e46b7b0a8 Mon Sep 17 00:00:00 2001
From: Thomas Graf <tgraf@infradead.org>
Date: Sun, 31 Oct 2010 09:37:38 -0700
Subject: [PATCH 0054/1066] text ematch: check for NULL pointer before
 destroying textsearch config

While validating the configuration em_ops is already set, thus the
individual destroy functions are called, but the ematch data has
not been allocated and associated with the ematch yet.

Signed-off-by: Thomas Graf <tgraf@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/em_text.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/sched/em_text.c b/net/sched/em_text.c
index 763253257411..ea8f566e720c 100644
--- a/net/sched/em_text.c
+++ b/net/sched/em_text.c
@@ -103,7 +103,8 @@ retry:
 
 static void em_text_destroy(struct tcf_proto *tp, struct tcf_ematch *m)
 {
-	textsearch_destroy(EM_TEXT_PRIV(m)->config);
+	if (EM_TEXT_PRIV(m) && EM_TEXT_PRIV(m)->config)
+		textsearch_destroy(EM_TEXT_PRIV(m)->config);
 }
 
 static int em_text_dump(struct sk_buff *skb, struct tcf_ematch *m)

From cf38d0ba7efdc476815768b2b999b27cfae69747 Mon Sep 17 00:00:00 2001
From: Rakib Mullick <rakib.mullick@gmail.com>
Date: Mon, 1 Nov 2010 12:53:50 +0600
Subject: [PATCH 0055/1066] x86, mm: Fix section mismatch in tlb.c

Mark tlb_cpuhp_notify as __cpuinit. It's basically a callback
function, which is called from __cpuinit init_smp_flash(). So -
it's safe.

We were warned by the following warning:

 WARNING: arch/x86/mm/built-in.o(.text+0x356d): Section mismatch
 in reference from the function tlb_cpuhp_notify() to the
 function .cpuinit.text:calculate_tlb_offset()
 The function tlb_cpuhp_notify() references
 the function __cpuinit calculate_tlb_offset().
 This is often because tlb_cpuhp_notify lacks a __cpuinit
 annotation or the annotation of calculate_tlb_offset is wrong.

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <AANLkTinWQRG=HA9uB3ad0KAqRRTinL6L_4iKgF84coph@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/tlb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 49358481c733..12cdbb17ad18 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -251,7 +251,7 @@ static void __cpuinit calculate_tlb_offset(void)
 	}
 }
 
-static int tlb_cpuhp_notify(struct notifier_block *n,
+static int __cpuinit tlb_cpuhp_notify(struct notifier_block *n,
 		unsigned long action, void *hcpu)
 {
 	switch (action & 0xf) {

From 30c56660fc4ba9bad7847ad43bb059d2447001d4 Mon Sep 17 00:00:00 2001
From: Christoph Fritz <chf.fritz@googlemail.com>
Date: Mon, 1 Nov 2010 11:32:22 +0100
Subject: [PATCH 0056/1066] drm/i915: opregion_setup: iounmap correct address

In case of an opregion signature mismatch in intel_opregion_setup(),
iounmap the correct address.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_opregion.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
index 917c7dc3cd6b..9b0d9a867aea 100644
--- a/drivers/gpu/drm/i915/intel_opregion.c
+++ b/drivers/gpu/drm/i915/intel_opregion.c
@@ -512,6 +512,6 @@ int intel_opregion_setup(struct drm_device *dev)
 	return 0;
 
 err_out:
-	iounmap(opregion->header);
+	iounmap(base);
 	return err;
 }

From 1d9c05d4d234493351cc39d8129fe5811147b2ff Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yaniv.rosner@broadcom.com>
Date: Mon, 1 Nov 2010 05:32:25 +0000
Subject: [PATCH 0057/1066] bnx2x: Restore appropriate delay during BMAC reset

Fix delay during BMAC reset from 10usec to 1ms.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x/bnx2x_link.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 2326774df843..89b33e27f614 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -610,7 +610,7 @@ static u8 bnx2x_bmac_enable(struct link_params *params,
 	/* reset and unreset the BigMac */
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
 		     (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
-	udelay(10);
+	msleep(1);
 
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
 		     (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));

From 9bffeac1eabe4162f5696f0d7f60aa32668f5061 Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yaniv.rosner@broadcom.com>
Date: Mon, 1 Nov 2010 05:32:27 +0000
Subject: [PATCH 0058/1066] bnx2x: Fix waiting for reset complete on BCM848x3
 PHYs

BCM848x3 requires additional of 50ms after reset done indication,
instead of fixed time of 200ms

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x/bnx2x_link.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 89b33e27f614..b6588c5411ea 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -5302,7 +5302,7 @@ static u8 bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
 {
 	struct bnx2x *bp = params->bp;
 	u16 autoneg_val, an_1000_val, an_10_100_val;
-	bnx2x_wait_reset_complete(bp, phy);
+
 	bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4,
 		      1 << NIG_LATCH_BC_ENABLE_MI_INT);
 
@@ -5431,6 +5431,7 @@ static u8 bnx2x_8481_config_init(struct bnx2x_phy *phy,
 
 	/* HW reset */
 	bnx2x_ext_phy_hw_reset(bp, params->port);
+	bnx2x_wait_reset_complete(bp, phy);
 
 	bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15);
 	return bnx2x_848xx_cmn_config_init(phy, params, vars);
@@ -5453,8 +5454,9 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
 	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
 		       MISC_REGISTERS_GPIO_OUTPUT_HIGH,
 		       port);
-	msleep(200); /* 100 is not enough */
-
+	bnx2x_wait_reset_complete(bp, phy);
+	/* Wait for GPHY to come out of reset */
+	msleep(50);
 	/* BCM84823 requires that XGXS links up first @ 10G for normal
 	behavior */
 	temp = vars->line_speed;

From 6a71bbe04c9ee9a6e892e584a09615c1dbf35edc Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yaniv.rosner@broadcom.com>
Date: Mon, 1 Nov 2010 05:32:31 +0000
Subject: [PATCH 0059/1066] bnx2x: Fix port selection in case of E2

On E2 flavor, dual-port mode, the port argument used for some
functions is needed as the global port number rather than the port per
path.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x/bnx2x_link.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index b6588c5411ea..fc637ce7f57d 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -5442,7 +5442,7 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
 				  struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
-	u8 port = params->port, initialize = 1;
+	u8 port, initialize = 1;
 	u16 val;
 	u16 temp;
 	u32 actual_phy_selection;
@@ -5451,6 +5451,10 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
 	/* This is just for MDIO_CTL_REG_84823_MEDIA register. */
 
 	msleep(1);
+	if (CHIP_IS_E2(bp))
+		port = BP_PATH(bp);
+	else
+		port = params->port;
 	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
 		       MISC_REGISTERS_GPIO_OUTPUT_HIGH,
 		       port);
@@ -5627,7 +5631,11 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy,
 				   struct link_params *params)
 {
 	struct bnx2x *bp = params->bp;
-	u8 port = params->port;
+	u8 port;
+	if (CHIP_IS_E2(bp))
+		port = BP_PATH(bp);
+	else
+		port = params->port;
 	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
 			    MISC_REGISTERS_GPIO_OUTPUT_LOW,
 			    port);
@@ -7023,7 +7031,8 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp,
 			return -EINVAL;
 		}
 		/* disable attentions */
-		bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+		bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 +
+			       port_of_path*4,
 			     (NIG_MASK_XGXS0_LINK_STATUS |
 			      NIG_MASK_XGXS0_LINK10G |
 			      NIG_MASK_SERDES0_LINK_STATUS |

From cf1d972cb6393b9b042289739111773226861d6c Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yaniv.rosner@broadcom.com>
Date: Mon, 1 Nov 2010 05:32:34 +0000
Subject: [PATCH 0060/1066] bnx2x: Clear latch indication on link reset

When using latch indication for link change notification, need to
clear it when port is unloaded, otherwise it might generate false
indication on next load.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x/bnx2x_link.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index fc637ce7f57d..fdd7e0349466 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -6938,7 +6938,7 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
 		  u8 reset_ext_phy)
 {
 	struct bnx2x *bp = params->bp;
-	u8 phy_index, port = params->port;
+	u8 phy_index, port = params->port, clear_latch_ind = 0;
 	DP(NETIF_MSG_LINK, "Resetting the link of port %d\n", port);
 	/* disable attentions */
 	vars->link_status = 0;
@@ -6976,9 +6976,18 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
 				params->phy[phy_index].link_reset(
 					&params->phy[phy_index],
 					params);
+			if (params->phy[phy_index].flags &
+			    FLAGS_REARM_LATCH_SIGNAL)
+				clear_latch_ind = 1;
 		}
 	}
 
+	if (clear_latch_ind) {
+		/* Clear latching indication */
+		bnx2x_rearm_latch_signal(bp, port, 0);
+		bnx2x_bits_dis(bp, NIG_REG_LATCH_BC_0 + port*4,
+			       1 << NIG_LATCH_BC_ENABLE_MI_INT);
+	}
 	if (params->phy[INT_PHY].link_reset)
 		params->phy[INT_PHY].link_reset(
 			&params->phy[INT_PHY], params);

From 650154bfd1ef3119e7c79f35447f0e11a5e4f7c6 Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yaniv.rosner@broadcom.com>
Date: Mon, 1 Nov 2010 05:32:36 +0000
Subject: [PATCH 0061/1066] bnx2x: Fix resetting BCM8726 PHY during common init

On BCM8726 based designs, the ports are swapped, hence the reset needs
to be asserted through port0 and not port1.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x/bnx2x_link.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index fdd7e0349466..488e251a2d3f 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -7152,7 +7152,7 @@ static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp,
 		(1<<(MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT)));
 	REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val);
 
-	bnx2x_ext_phy_hw_reset(bp, 1);
+	bnx2x_ext_phy_hw_reset(bp, 0);
 	msleep(5);
 	for (port = 0; port < PORT_MAX; port++) {
 		u32 shmem_base, shmem2_base;

From 121839beac03a127148605931598cd36e1cbeab7 Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yaniv.rosner@broadcom.com>
Date: Mon, 1 Nov 2010 05:32:38 +0000
Subject: [PATCH 0062/1066] bnx2x: Do not enable CL37 BAM unless it is
 explicitly enabled

Enabling CL37 BAM on BCM8073 by default may lead to link issues since
not all switches support it. So enable CL37 BAM only if explicitly
selected.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x/bnx2x_hsi.h  |  9 ++++++++-
 drivers/net/bnx2x/bnx2x_link.c | 18 ++++++++++++------
 2 files changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h
index 18c8e23a0e82..4cfd4e9b5586 100644
--- a/drivers/net/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/bnx2x/bnx2x_hsi.h
@@ -244,7 +244,14 @@ struct port_hw_cfg {			    /* port 0: 0x12c  port 1: 0x2bc */
 
 	u16 xgxs_config_tx[4];				    /* 0x1A0 */
 
-	u32 Reserved1[57];				    /* 0x1A8 */
+	u32 Reserved1[56];				    /* 0x1A8 */
+	u32 default_cfg;				    /* 0x288 */
+	/*  Enable BAM on KR */
+#define PORT_HW_CFG_ENABLE_BAM_ON_KR_MASK		      0x00100000
+#define PORT_HW_CFG_ENABLE_BAM_ON_KR_SHIFT		      20
+#define PORT_HW_CFG_ENABLE_BAM_ON_KR_DISABLED		      0x00000000
+#define PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED		      0x00100000
+
 	u32 speed_capability_mask2;			    /* 0x28C */
 #define PORT_HW_CFG_SPEED_CAPABILITY2_D3_MASK		      0x0000FFFF
 #define PORT_HW_CFG_SPEED_CAPABILITY2_D3_SHIFT		      0
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 488e251a2d3f..d076b911e160 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -3525,13 +3525,19 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
 	DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1): 0x%x\n", tmp1);
 
 	/* Enable CL37 BAM */
-	bnx2x_cl45_read(bp, phy,
-			MDIO_AN_DEVAD,
-			MDIO_AN_REG_8073_BAM, &val);
-	bnx2x_cl45_write(bp, phy,
-			 MDIO_AN_DEVAD,
-			 MDIO_AN_REG_8073_BAM, val | 1);
+	if (REG_RD(bp, params->shmem_base +
+			 offsetof(struct shmem_region, dev_info.
+				  port_hw_config[params->port].default_cfg)) &
+	    PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) {
 
+		bnx2x_cl45_read(bp, phy,
+				MDIO_AN_DEVAD,
+				MDIO_AN_REG_8073_BAM, &val);
+		bnx2x_cl45_write(bp, phy,
+				 MDIO_AN_DEVAD,
+				 MDIO_AN_REG_8073_BAM, val | 1);
+		DP(NETIF_MSG_LINK, "Enable CL37 BAM on KR\n");
+	}
 	if (params->loopback_mode == LOOPBACK_EXT) {
 		bnx2x_807x_force_10G(bp, phy);
 		DP(NETIF_MSG_LINK, "Forced speed 10G on 807X\n");

From 1d03f069e42005e881fe96cf0185bdd4293ad340 Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yaniv.rosner@broadcom.com>
Date: Mon, 1 Nov 2010 05:32:41 +0000
Subject: [PATCH 0063/1066] bnx2x: Reset 8073 phy during common init

Resetting 8073 during common init is required on boards in which the
8073 reset pin is not asserted by default.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x/bnx2x_link.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index d076b911e160..580919619252 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -7024,6 +7024,7 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp,
 	s8 port;
 	s8 port_of_path = 0;
 
+	bnx2x_ext_phy_hw_reset(bp, 0);
 	/* PART1 - Reset both phys */
 	for (port = PORT_MAX - 1; port >= PORT_0; port--) {
 		u32 shmem_base, shmem2_base;

From 0d85cca017243ab1aa6333a72c52f14eaa3bd56a Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yaniv.rosner@broadcom.com>
Date: Mon, 1 Nov 2010 05:32:43 +0000
Subject: [PATCH 0064/1066] bnx2x: Update version number

Update bnx2x version number.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x/bnx2x.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 9eea225decaf..863e73a85fbe 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -20,8 +20,8 @@
  * (you will need to reboot afterwards) */
 /* #define BNX2X_STOP_ON_ERROR */
 
-#define DRV_MODULE_VERSION      "1.60.00-3"
-#define DRV_MODULE_RELDATE      "2010/10/19"
+#define DRV_MODULE_VERSION      "1.60.00-4"
+#define DRV_MODULE_RELDATE      "2010/11/01"
 #define BNX2X_BC_VER            0x040200
 
 #define BNX2X_MULTI_QUEUE

From eae61ae15b752b919ea45746f6dff449ff6d3281 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Tue, 26 Oct 2010 09:57:07 +0000
Subject: [PATCH 0065/1066] trivial: fix typos concerning "function"
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

I'm a bit unsure about this patch.  I'm unable to parse both statements.

Cc: netdev@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/isdn/hisax/isar.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/isdn/hisax/isar.c b/drivers/isdn/hisax/isar.c
index 40b914bded8c..2e72227bd071 100644
--- a/drivers/isdn/hisax/isar.c
+++ b/drivers/isdn/hisax/isar.c
@@ -1427,8 +1427,8 @@ modeisar(struct BCState *bcs, int mode, int bc)
 					&bcs->hw.isar.reg->Flags))
 					bcs->hw.isar.dpath = 1;
 				else {
-					printk(KERN_WARNING"isar modeisar analog funktions only with DP1\n");
-					debugl1(cs, "isar modeisar analog funktions only with DP1");
+					printk(KERN_WARNING"isar modeisar analog functions only with DP1\n");
+					debugl1(cs, "isar modeisar analog functions only with DP1");
 					return(1);
 				}
 				break;

From c6afd658073f9fdb4cc80664dac71fa9db6fdf35 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon, 1 Nov 2010 13:39:24 +0000
Subject: [PATCH 0066/1066] drm/i915: Apply big hammer to serialise buffer
 access between rings

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
---
 drivers/gpu/drm/i915/i915_gem.c | 80 +++++++++++++++++++++------------
 1 file changed, 52 insertions(+), 28 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 469a5b1a48aa..984eb6e9db03 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3106,7 +3106,8 @@ i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
 	 * write domain
 	 */
 	if (obj->write_domain &&
-	    obj->write_domain != obj->pending_read_domains) {
+	    (obj->write_domain != obj->pending_read_domains ||
+	     obj_priv->ring != ring)) {
 		flush_domains |= obj->write_domain;
 		invalidate_domains |=
 			obj->pending_read_domains & ~obj->write_domain;
@@ -3495,6 +3496,52 @@ i915_gem_execbuffer_pin(struct drm_device *dev,
 	return 0;
 }
 
+static int
+i915_gem_execbuffer_move_to_gpu(struct drm_device *dev,
+				struct drm_file *file,
+				struct intel_ring_buffer *ring,
+				struct drm_gem_object **objects,
+				int count)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret, i;
+
+	/* Zero the global flush/invalidate flags. These
+	 * will be modified as new domains are computed
+	 * for each object
+	 */
+	dev->invalidate_domains = 0;
+	dev->flush_domains = 0;
+	dev_priv->mm.flush_rings = 0;
+	for (i = 0; i < count; i++)
+		i915_gem_object_set_to_gpu_domain(objects[i], ring);
+
+	if (dev->invalidate_domains | dev->flush_domains) {
+#if WATCH_EXEC
+		DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
+			  __func__,
+			 dev->invalidate_domains,
+			 dev->flush_domains);
+#endif
+		i915_gem_flush(dev, file,
+			       dev->invalidate_domains,
+			       dev->flush_domains,
+			       dev_priv->mm.flush_rings);
+	}
+
+	for (i = 0; i < count; i++) {
+		struct drm_i915_gem_object *obj = to_intel_bo(objects[i]);
+		/* XXX replace with semaphores */
+		if (obj->ring && ring != obj->ring) {
+			ret = i915_gem_object_wait_rendering(&obj->base, true);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
 /* Throttle our rendering by waiting until the ring has completed our requests
  * emitted over 20 msec ago.
  *
@@ -3755,33 +3802,10 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 		goto err;
 	}
 
-	/* Zero the global flush/invalidate flags. These
-	 * will be modified as new domains are computed
-	 * for each object
-	 */
-	dev->invalidate_domains = 0;
-	dev->flush_domains = 0;
-	dev_priv->mm.flush_rings = 0;
-
-	for (i = 0; i < args->buffer_count; i++) {
-		struct drm_gem_object *obj = object_list[i];
-
-		/* Compute new gpu domains and update invalidate/flush */
-		i915_gem_object_set_to_gpu_domain(obj, ring);
-	}
-
-	if (dev->invalidate_domains | dev->flush_domains) {
-#if WATCH_EXEC
-		DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
-			  __func__,
-			 dev->invalidate_domains,
-			 dev->flush_domains);
-#endif
-		i915_gem_flush(dev, file,
-			       dev->invalidate_domains,
-			       dev->flush_domains,
-			       dev_priv->mm.flush_rings);
-	}
+	ret = i915_gem_execbuffer_move_to_gpu(dev, file, ring,
+					      object_list, args->buffer_count);
+	if (ret)
+		goto err;
 
 	for (i = 0; i < args->buffer_count; i++) {
 		struct drm_gem_object *obj = object_list[i];

From 6f9b901823aafd14a84ae27f61ff28bafed01260 Mon Sep 17 00:00:00 2001
From: "Dr. David Alan Gilbert" <linux@treblig.org>
Date: Sun, 31 Oct 2010 07:26:03 +0000
Subject: [PATCH 0067/1066] l2tp: kzalloc with swapped params in
 l2tp_dfs_seq_open

  'sparse' spotted that the parameters to kzalloc in l2tp_dfs_seq_open
were swapped.

Tested on current git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
at 1792f17b7210280a3d7ff29da9614ba779cfcedb  build, boots and I can see that directory,
but there again I could see /sys/kernel/debug/l2tp with it swapped; I don't have
any l2tp in use.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/l2tp/l2tp_debugfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/l2tp/l2tp_debugfs.c b/net/l2tp/l2tp_debugfs.c
index 104ec3b283d4..b8dbae82fab8 100644
--- a/net/l2tp/l2tp_debugfs.c
+++ b/net/l2tp/l2tp_debugfs.c
@@ -249,7 +249,7 @@ static int l2tp_dfs_seq_open(struct inode *inode, struct file *file)
 	struct seq_file *seq;
 	int rc = -ENOMEM;
 
-	pd = kzalloc(GFP_KERNEL, sizeof(*pd));
+	pd = kzalloc(sizeof(*pd), GFP_KERNEL);
 	if (pd == NULL)
 		goto out;
 

From b0786b430c982dffbb44d8030e6b6088671ce745 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Mon, 1 Nov 2010 07:11:54 -0700
Subject: [PATCH 0068/1066] usbnet: fix usb_autopm_get_interface failure(v1)

Since usbnet already took usb runtime pm, we have to
enable runtime pm for usb interface of usbnet, otherwise
usb_autopm_get_interface may return failure and cause
'ifconfig usb0 up' failed if USB_SUSPEND(RUNTIME_PM) is
enabled.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Joe Perches <joe@perches.com>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/usbnet.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index ca7fc9df1ccf..c04d49e31f81 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -45,6 +45,7 @@
 #include <linux/usb/usbnet.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
+#include <linux/pm_runtime.h>
 
 #define DRIVER_VERSION		"22-Aug-2005"
 
@@ -1273,6 +1274,16 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 	struct usb_device		*xdev;
 	int				status;
 	const char			*name;
+	struct usb_driver 	*driver = to_usb_driver(udev->dev.driver);
+
+	/* usbnet already took usb runtime pm, so have to enable the feature
+	 * for usb interface, otherwise usb_autopm_get_interface may return
+	 * failure if USB_SUSPEND(RUNTIME_PM) is enabled.
+	 */
+	if (!driver->supports_autosuspend) {
+		driver->supports_autosuspend = 1;
+		pm_runtime_enable(&udev->dev);
+	}
 
 	name = udev->dev.driver->name;
 	info = (struct driver_info *) prod->driver_info;

From be8cb585d22013d87b1a123cf3bc93b474050c35 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 1 Nov 2010 11:38:06 -0400
Subject: [PATCH 0069/1066] ARM: mach-shmobile: include drivers/sh/Kconfig

Many of the config bit are presently duplicated between the platforms,
which will gradually cleaned up through centralization. For the moment we
expose some new INTC features through drivers/sh/Kconfig that the ARM
platforms presently don't enable, so make it generally available.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 54b479c35ee0..51dcd59eda6a 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -116,4 +116,6 @@ endmenu
 config SH_CLK_CPG
 	bool
 
+source "drivers/sh/Kconfig"
+
 endif

From 811718f071bbd337a823b2827ca3ea2b7205d162 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 1 Nov 2010 08:49:51 -0700
Subject: [PATCH 0070/1066] ibm_newemac: Remove netif_stop_queue() in
 emac_probe().

Touching the queue state before register_netdev is not
allowed, and besides the queue state before ->open()
is "don't care"

Reported-by: Josh Boyer <jwboyer@gmail.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ibm_newemac/core.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 385dc3204cb7..06bb9b799458 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -2871,7 +2871,6 @@ static int __devinit emac_probe(struct platform_device *ofdev,
 	SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops);
 
 	netif_carrier_off(ndev);
-	netif_stop_queue(ndev);
 
 	err = register_netdev(ndev);
 	if (err) {

From 315daea9481277d9b8109b47e974835a901e4bc5 Mon Sep 17 00:00:00 2001
From: Dmitry Artamonow <mad_soft@inbox.ru>
Date: Mon, 1 Nov 2010 09:33:53 -0700
Subject: [PATCH 0071/1066] USB: gadget: fix ethernet gadget crash in
 gether_setup

Crash is triggered by commit e6484930d7 ("net: allocate tx queues in
register_netdevice"), which moved tx netqueue creation into register_netdev.
So now calling netif_stop_queue() before register_netdev causes an oops.
Move netif_stop_queue() after net device registration to fix crash.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/usb/gadget/u_ether.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index cb23355f52d3..fbe86ca95802 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -811,7 +811,6 @@ int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN])
 		INFO(dev, "MAC %pM\n", net->dev_addr);
 		INFO(dev, "HOST MAC %pM\n", dev->host_mac);
 
-		netif_stop_queue(net);
 		the_dev = dev;
 	}
 

From 5aefa34fada9d17a00635516688de34702451708 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 1 Nov 2010 15:30:31 -0400
Subject: [PATCH 0072/1066] sh: clkfwk: Fix up rate rounding error handling.

According to the linux/clk.h definition we should be handing back an
errno value or a valid rate. This fixes up the case where 0 can be
returned for invalid frequencies or cases where rounding has no
selectable candidate.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/sh/clk/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
index fd0d1b98901c..861144360d89 100644
--- a/drivers/sh/clk/core.c
+++ b/drivers/sh/clk/core.c
@@ -90,8 +90,8 @@ struct clk_rate_round_data {
 static long clk_rate_round_helper(struct clk_rate_round_data *rounder)
 {
 	unsigned long rate_error, rate_error_prev = ~0UL;
-	unsigned long rate_best_fit = rounder->rate;
 	unsigned long highest, lowest, freq;
+	long rate_best_fit = -ENOENT;
 	int i;
 
 	highest = 0;
@@ -146,7 +146,7 @@ long clk_rate_table_round(struct clk *clk,
 	};
 
 	if (clk->nr_freqs < 1)
-		return 0;
+		return -ENOSYS;
 
 	return clk_rate_round_helper(&table_round);
 }

From 38a6f4266989c4dae68eccb1a5cb4580a48003e4 Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Mon, 1 Nov 2010 15:21:35 -0400
Subject: [PATCH 0073/1066] arch/tile: complete migration to new kmap_atomic
 scheme

This change makes KM_TYPE_NR independent of the actual deprecated
list of km_type values, which are no longer used in tile code anywhere.
For now we leave it set to 8, allowing that many nested mappings,
and thus reserving 32MB of address space.

A few remaining places using KM_* values were cleaned up as well.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 arch/tile/include/asm/highmem.h    |  1 -
 arch/tile/include/asm/kmap_types.h | 34 +++++++++++++++++++++---------
 arch/tile/include/asm/pgtable.h    |  6 ++----
 arch/tile/kernel/machine_kexec.c   |  6 +++---
 arch/tile/lib/memcpy_tile64.c      | 11 +++++++---
 arch/tile/mm/highmem.c             |  2 +-
 arch/tile/mm/pgtable.c             |  4 ++--
 7 files changed, 40 insertions(+), 24 deletions(-)

diff --git a/arch/tile/include/asm/highmem.h b/arch/tile/include/asm/highmem.h
index e0f7ee186721..b2a6c5de79ab 100644
--- a/arch/tile/include/asm/highmem.h
+++ b/arch/tile/include/asm/highmem.h
@@ -23,7 +23,6 @@
 
 #include <linux/interrupt.h>
 #include <linux/threads.h>
-#include <asm/kmap_types.h>
 #include <asm/tlbflush.h>
 #include <asm/homecache.h>
 
diff --git a/arch/tile/include/asm/kmap_types.h b/arch/tile/include/asm/kmap_types.h
index 1480106d1c05..3d0f20246260 100644
--- a/arch/tile/include/asm/kmap_types.h
+++ b/arch/tile/include/asm/kmap_types.h
@@ -16,28 +16,42 @@
 #define _ASM_TILE_KMAP_TYPES_H
 
 /*
- * In TILE Linux each set of four of these uses another 16MB chunk of
- * address space, given 64 tiles and 64KB pages, so we only enable
- * ones that are required by the kernel configuration.
+ * In 32-bit TILE Linux we have to balance the desire to have a lot of
+ * nested atomic mappings with the fact that large page sizes and many
+ * processors chew up address space quickly.  In a typical
+ * 64-processor, 64KB-page layout build, making KM_TYPE_NR one larger
+ * adds 4MB of required address-space.  For now we leave KM_TYPE_NR
+ * set to depth 8.
  */
 enum km_type {
+	KM_TYPE_NR = 8
+};
+
+/*
+ * We provide dummy definitions of all the stray values that used to be
+ * required for kmap_atomic() and no longer are.
+ */
+enum {
 	KM_BOUNCE_READ,
 	KM_SKB_SUNRPC_DATA,
 	KM_SKB_DATA_SOFTIRQ,
 	KM_USER0,
 	KM_USER1,
 	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
 	KM_IRQ0,
 	KM_IRQ1,
 	KM_SOFTIRQ0,
 	KM_SOFTIRQ1,
-	KM_MEMCPY0,
-	KM_MEMCPY1,
-#if defined(CONFIG_HIGHPTE)
-	KM_PTE0,
-	KM_PTE1,
-#endif
-	KM_TYPE_NR
+	KM_SYNC_ICACHE,
+	KM_SYNC_DCACHE,
+	KM_UML_USERCOPY,
+	KM_IRQ_PTE,
+	KM_NMI,
+	KM_NMI_PTE,
+	KM_KDB
 };
 
 #endif /* _ASM_TILE_KMAP_TYPES_H */
diff --git a/arch/tile/include/asm/pgtable.h b/arch/tile/include/asm/pgtable.h
index dc4ccdd855bc..a6604e9485da 100644
--- a/arch/tile/include/asm/pgtable.h
+++ b/arch/tile/include/asm/pgtable.h
@@ -344,10 +344,8 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 #define pgd_offset_k(address) pgd_offset(&init_mm, address)
 
 #if defined(CONFIG_HIGHPTE)
-extern pte_t *_pte_offset_map(pmd_t *, unsigned long address, enum km_type);
-#define pte_offset_map(dir, address) \
-	_pte_offset_map(dir, address, KM_PTE0)
-#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
+extern pte_t *pte_offset_map(pmd_t *, unsigned long address);
+#define pte_unmap(pte) kunmap_atomic(pte)
 #else
 #define pte_offset_map(dir, address) pte_offset_kernel(dir, address)
 #define pte_unmap(pte) do { } while (0)
diff --git a/arch/tile/kernel/machine_kexec.c b/arch/tile/kernel/machine_kexec.c
index ba7a265d6179..0d8b9e933487 100644
--- a/arch/tile/kernel/machine_kexec.c
+++ b/arch/tile/kernel/machine_kexec.c
@@ -182,13 +182,13 @@ static void kexec_find_and_set_command_line(struct kimage *image)
 
 		if ((entry & IND_SOURCE)) {
 			void *va =
-				kmap_atomic_pfn(entry >> PAGE_SHIFT, KM_USER0);
+				kmap_atomic_pfn(entry >> PAGE_SHIFT);
 			r = kexec_bn2cl(va);
 			if (r) {
 				command_line = r;
 				break;
 			}
-			kunmap_atomic(va, KM_USER0);
+			kunmap_atomic(va);
 		}
 	}
 
@@ -198,7 +198,7 @@ static void kexec_find_and_set_command_line(struct kimage *image)
 
 		hverr = hv_set_command_line(
 			(HV_VirtAddr) command_line, strlen(command_line));
-		kunmap_atomic(command_line, KM_USER0);
+		kunmap_atomic(command_line);
 	} else {
 		pr_info("%s: no command line found; making empty\n",
 		       __func__);
diff --git a/arch/tile/lib/memcpy_tile64.c b/arch/tile/lib/memcpy_tile64.c
index dfedea7b266b..f7d4a6ad61e8 100644
--- a/arch/tile/lib/memcpy_tile64.c
+++ b/arch/tile/lib/memcpy_tile64.c
@@ -54,7 +54,7 @@ typedef unsigned long (*memcpy_t)(void *, const void *, unsigned long);
  * we must run with interrupts disabled to avoid the risk of some
  * other code seeing the incoherent data in our cache.  (Recall that
  * our cache is indexed by PA, so even if the other code doesn't use
- * our KM_MEMCPY virtual addresses, they'll still hit in cache using
+ * our kmap_atomic virtual addresses, they'll still hit in cache using
  * the normal VAs that aren't supposed to hit in cache.)
  */
 static void memcpy_multicache(void *dest, const void *source,
@@ -64,6 +64,7 @@ static void memcpy_multicache(void *dest, const void *source,
 	unsigned long flags, newsrc, newdst;
 	pmd_t *pmdp;
 	pte_t *ptep;
+	int type0, type1;
 	int cpu = get_cpu();
 
 	/*
@@ -77,7 +78,8 @@ static void memcpy_multicache(void *dest, const void *source,
 	sim_allow_multiple_caching(1);
 
 	/* Set up the new dest mapping */
-	idx = FIX_KMAP_BEGIN + (KM_TYPE_NR * cpu) + KM_MEMCPY0;
+	type0 = kmap_atomic_idx_push();
+	idx = FIX_KMAP_BEGIN + (KM_TYPE_NR * cpu) + type0;
 	newdst = __fix_to_virt(idx) + ((unsigned long)dest & (PAGE_SIZE-1));
 	pmdp = pmd_offset(pud_offset(pgd_offset_k(newdst), newdst), newdst);
 	ptep = pte_offset_kernel(pmdp, newdst);
@@ -87,7 +89,8 @@ static void memcpy_multicache(void *dest, const void *source,
 	}
 
 	/* Set up the new source mapping */
-	idx += (KM_MEMCPY0 - KM_MEMCPY1);
+	type1 = kmap_atomic_idx_push();
+	idx += (type0 - type1);
 	src_pte = hv_pte_set_nc(src_pte);
 	src_pte = hv_pte_clear_writable(src_pte);  /* be paranoid */
 	newsrc = __fix_to_virt(idx) + ((unsigned long)source & (PAGE_SIZE-1));
@@ -119,6 +122,8 @@ static void memcpy_multicache(void *dest, const void *source,
 	 * We're done: notify the simulator that all is back to normal,
 	 * and re-enable interrupts and pre-emption.
 	 */
+	kmap_atomic_idx_pop();
+	kmap_atomic_idx_pop();
 	sim_allow_multiple_caching(0);
 	local_irq_restore(flags);
 	put_cpu();
diff --git a/arch/tile/mm/highmem.c b/arch/tile/mm/highmem.c
index abb57331cf6e..31dbbd9afe47 100644
--- a/arch/tile/mm/highmem.c
+++ b/arch/tile/mm/highmem.c
@@ -227,7 +227,7 @@ EXPORT_SYMBOL(kmap_atomic_prot);
 void *__kmap_atomic(struct page *page)
 {
 	/* PAGE_NONE is a magic value that tells us to check immutability. */
-	return kmap_atomic_prot(page, type, PAGE_NONE);
+	return kmap_atomic_prot(page, PAGE_NONE);
 }
 EXPORT_SYMBOL(__kmap_atomic);
 
diff --git a/arch/tile/mm/pgtable.c b/arch/tile/mm/pgtable.c
index 335c24621c41..1f5430c53d0d 100644
--- a/arch/tile/mm/pgtable.c
+++ b/arch/tile/mm/pgtable.c
@@ -134,9 +134,9 @@ void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t flags)
 }
 
 #if defined(CONFIG_HIGHPTE)
-pte_t *_pte_offset_map(pmd_t *dir, unsigned long address, enum km_type type)
+pte_t *_pte_offset_map(pmd_t *dir, unsigned long address)
 {
-	pte_t *pte = kmap_atomic(pmd_page(*dir), type) +
+	pte_t *pte = kmap_atomic(pmd_page(*dir)) +
 		(pmd_ptfn(*dir) << HV_LOG2_PAGE_TABLE_ALIGN) & ~PAGE_MASK;
 	return &pte[pte_index(address)];
 }

From 5d966115de84c22cd4df029cb00be0e51fab6c10 Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Mon, 1 Nov 2010 15:24:29 -0400
Subject: [PATCH 0074/1066] arch/tile: bomb raw_local_irq_ to arch_local_irq_

This completes the tile migration to the new naming scheme for
the architecture-specific irq management code.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 arch/tile/kernel/early_printk.c | 2 +-
 arch/tile/kernel/hardwall.c     | 4 ++--
 arch/tile/kernel/irq.c          | 4 ++--
 arch/tile/kernel/messaging.c    | 2 +-
 arch/tile/kernel/reboot.c       | 6 +++---
 arch/tile/kernel/setup.c        | 8 ++++----
 arch/tile/kernel/smp.c          | 2 +-
 arch/tile/kernel/time.c         | 8 ++++----
 8 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/tile/kernel/early_printk.c b/arch/tile/kernel/early_printk.c
index 2c54fd43a8a0..493a0e66d916 100644
--- a/arch/tile/kernel/early_printk.c
+++ b/arch/tile/kernel/early_printk.c
@@ -54,7 +54,7 @@ void early_printk(const char *fmt, ...)
 void early_panic(const char *fmt, ...)
 {
 	va_list ap;
-	raw_local_irq_disable_all();
+	arch_local_irq_disable_all();
 	va_start(ap, fmt);
 	early_printk("Kernel panic - not syncing: ");
 	early_vprintk(fmt, ap);
diff --git a/arch/tile/kernel/hardwall.c b/arch/tile/kernel/hardwall.c
index 1e54a7843410..70b829a15ae5 100644
--- a/arch/tile/kernel/hardwall.c
+++ b/arch/tile/kernel/hardwall.c
@@ -151,12 +151,12 @@ enum direction_protect {
 
 static void enable_firewall_interrupts(void)
 {
-	raw_local_irq_unmask_now(INT_UDN_FIREWALL);
+	arch_local_irq_unmask_now(INT_UDN_FIREWALL);
 }
 
 static void disable_firewall_interrupts(void)
 {
-	raw_local_irq_mask_now(INT_UDN_FIREWALL);
+	arch_local_irq_mask_now(INT_UDN_FIREWALL);
 }
 
 /* Set up hardwall on this cpu based on the passed hardwall_info. */
diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c
index e63917687e99..128805ef8f2c 100644
--- a/arch/tile/kernel/irq.c
+++ b/arch/tile/kernel/irq.c
@@ -26,7 +26,7 @@
 #define IS_HW_CLEARED 1
 
 /*
- * The set of interrupts we enable for raw_local_irq_enable().
+ * The set of interrupts we enable for arch_local_irq_enable().
  * This is initialized to have just a single interrupt that the kernel
  * doesn't actually use as a sentinel.  During kernel init,
  * interrupts are added as the kernel gets prepared to support them.
@@ -225,7 +225,7 @@ void __cpuinit setup_irq_regs(void)
 	/* Enable interrupt delivery. */
 	unmask_irqs(~0UL);
 #if CHIP_HAS_IPI()
-	raw_local_irq_unmask(INT_IPI_K);
+	arch_local_irq_unmask(INT_IPI_K);
 #endif
 }
 
diff --git a/arch/tile/kernel/messaging.c b/arch/tile/kernel/messaging.c
index 997e3933f726..0858ee6b520f 100644
--- a/arch/tile/kernel/messaging.c
+++ b/arch/tile/kernel/messaging.c
@@ -34,7 +34,7 @@ void __cpuinit init_messaging(void)
 		panic("hv_register_message_state: error %d", rc);
 
 	/* Make sure downcall interrupts will be enabled. */
-	raw_local_irq_unmask(INT_INTCTRL_K);
+	arch_local_irq_unmask(INT_INTCTRL_K);
 }
 
 void hv_message_intr(struct pt_regs *regs, int intnum)
diff --git a/arch/tile/kernel/reboot.c b/arch/tile/kernel/reboot.c
index acd86d20beba..baa3d905fee2 100644
--- a/arch/tile/kernel/reboot.c
+++ b/arch/tile/kernel/reboot.c
@@ -27,7 +27,7 @@
 void machine_halt(void)
 {
 	warn_early_printk();
-	raw_local_irq_disable_all();
+	arch_local_irq_disable_all();
 	smp_send_stop();
 	hv_halt();
 }
@@ -35,14 +35,14 @@ void machine_halt(void)
 void machine_power_off(void)
 {
 	warn_early_printk();
-	raw_local_irq_disable_all();
+	arch_local_irq_disable_all();
 	smp_send_stop();
 	hv_power_off();
 }
 
 void machine_restart(char *cmd)
 {
-	raw_local_irq_disable_all();
+	arch_local_irq_disable_all();
 	smp_send_stop();
 	hv_restart((HV_VirtAddr) "vmlinux", (HV_VirtAddr) cmd);
 }
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
index ae51cad12da0..fb0b3cbeae14 100644
--- a/arch/tile/kernel/setup.c
+++ b/arch/tile/kernel/setup.c
@@ -868,14 +868,14 @@ void __cpuinit setup_cpu(int boot)
 
 	/* Allow asynchronous TLB interrupts. */
 #if CHIP_HAS_TILE_DMA()
-	raw_local_irq_unmask(INT_DMATLB_MISS);
-	raw_local_irq_unmask(INT_DMATLB_ACCESS);
+	arch_local_irq_unmask(INT_DMATLB_MISS);
+	arch_local_irq_unmask(INT_DMATLB_ACCESS);
 #endif
 #if CHIP_HAS_SN_PROC()
-	raw_local_irq_unmask(INT_SNITLB_MISS);
+	arch_local_irq_unmask(INT_SNITLB_MISS);
 #endif
 #ifdef __tilegx__
-	raw_local_irq_unmask(INT_SINGLE_STEP_K);
+	arch_local_irq_unmask(INT_SINGLE_STEP_K);
 #endif
 
 	/*
diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c
index 75255d90aff3..9575b37a8b75 100644
--- a/arch/tile/kernel/smp.c
+++ b/arch/tile/kernel/smp.c
@@ -115,7 +115,7 @@ static void smp_start_cpu_interrupt(void)
 static void smp_stop_cpu_interrupt(void)
 {
 	set_cpu_online(smp_processor_id(), 0);
-	raw_local_irq_disable_all();
+	arch_local_irq_disable_all();
 	for (;;)
 		asm("nap");
 }
diff --git a/arch/tile/kernel/time.c b/arch/tile/kernel/time.c
index 6bed820e1421..f2e156e44692 100644
--- a/arch/tile/kernel/time.c
+++ b/arch/tile/kernel/time.c
@@ -132,7 +132,7 @@ static int tile_timer_set_next_event(unsigned long ticks,
 {
 	BUG_ON(ticks > MAX_TICK);
 	__insn_mtspr(SPR_TILE_TIMER_CONTROL, ticks);
-	raw_local_irq_unmask_now(INT_TILE_TIMER);
+	arch_local_irq_unmask_now(INT_TILE_TIMER);
 	return 0;
 }
 
@@ -143,7 +143,7 @@ static int tile_timer_set_next_event(unsigned long ticks,
 static void tile_timer_set_mode(enum clock_event_mode mode,
 				struct clock_event_device *evt)
 {
-	raw_local_irq_mask_now(INT_TILE_TIMER);
+	arch_local_irq_mask_now(INT_TILE_TIMER);
 }
 
 /*
@@ -172,7 +172,7 @@ void __cpuinit setup_tile_timer(void)
 	evt->cpumask = cpumask_of(smp_processor_id());
 
 	/* Start out with timer not firing. */
-	raw_local_irq_mask_now(INT_TILE_TIMER);
+	arch_local_irq_mask_now(INT_TILE_TIMER);
 
 	/* Register tile timer. */
 	clockevents_register_device(evt);
@@ -188,7 +188,7 @@ void do_timer_interrupt(struct pt_regs *regs, int fault_num)
 	 * Mask the timer interrupt here, since we are a oneshot timer
 	 * and there are now by definition no events pending.
 	 */
-	raw_local_irq_mask(INT_TILE_TIMER);
+	arch_local_irq_mask(INT_TILE_TIMER);
 
 	/* Track time spent here in an interrupt context */
 	irq_enter();

From d59e609d6568ba5ab23c256f412ac5ec360722c1 Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Mon, 1 Nov 2010 15:25:16 -0400
Subject: [PATCH 0075/1066] arch/tile: avoid __must_check warning on one
 strict_strtol check

For the "initfree" boot argument it's not that big a deal, but
to avoid warnings in the code, we check for a valid value before
allowing the specified argument to override the kernel default.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 arch/tile/mm/init.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c
index 78e1982cb6c9..0b9ce69b0ee5 100644
--- a/arch/tile/mm/init.c
+++ b/arch/tile/mm/init.c
@@ -988,8 +988,12 @@ static long __write_once initfree = 1;
 /* Select whether to free (1) or mark unusable (0) the __init pages. */
 static int __init set_initfree(char *str)
 {
-	strict_strtol(str, 0, &initfree);
-	pr_info("initfree: %s free init pages\n", initfree ? "will" : "won't");
+	long val;
+	if (strict_strtol(str, 0, &val)) {
+		initfree = val;
+		pr_info("initfree: %s free init pages\n",
+			initfree ? "will" : "won't");
+	}
 	return 1;
 }
 __setup("initfree=", set_initfree);

From 34a89d26bdc4ba46a406fa3842239e921c493d44 Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Thu, 28 Oct 2010 15:03:30 -0400
Subject: [PATCH 0076/1066] arch/tile: correct double syscall restart for
 nested signals

This change is modelled on similar fixes for other architectures.
The pt_regs "faultnum" member is set to the trap (fault) number that
caused us to enter the kernel, and is INT_SWINT_1 for the syscall software
interrupt.  We already supported a pseudo value, INT_SWINT_1_SIGRETURN,
that we used for the rt_sigreturn syscall; it avoided the case where
one signal was handled, then we "tail-called" to another handler.

This change avoids the similar case where we start to call one handler,
then are preempted into another handler when we start trying to run
the first handler.  We clear ->faultnum after calling handle_signal(),
and to be paranoid also in the case where there was no signal to deliver.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 arch/tile/kernel/signal.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c
index fb28e85ae3ae..704ce0bce833 100644
--- a/arch/tile/kernel/signal.c
+++ b/arch/tile/kernel/signal.c
@@ -330,7 +330,7 @@ void do_signal(struct pt_regs *regs)
 			current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
 		}
 
-		return;
+		goto done;
 	}
 
 	/* Did we come from a system call? */
@@ -358,4 +358,8 @@ void do_signal(struct pt_regs *regs)
 		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
 		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
 	}
+
+done:
+	/* Avoid double syscall restart if there are nested signals. */
+	regs->faultnum = INT_SWINT_1_SIGRETURN;
 }

From 1deb9c5dfb179819ecdbf80a1d121e26c63caab3 Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Thu, 28 Oct 2010 15:47:06 -0400
Subject: [PATCH 0077/1066] arch/tile: don't allow user code to set the PL via
 ptrace or signal return

The kernel was allowing any component of the pt_regs to be updated either
by signal handlers writing to the stack, or by processes writing via
PTRACE_POKEUSR or PTRACE_SETREGS, which meant they could set their PL
up from 0 to 1 and get access to kernel code and data (or, in practice,
cause a kernel panic).  We now always reset the ex1 field, allowing the
user to set their ICS bit only.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 arch/tile/kernel/ptrace.c | 39 +++++++++++++++++++++------------------
 arch/tile/kernel/signal.c |  3 +++
 2 files changed, 24 insertions(+), 18 deletions(-)

diff --git a/arch/tile/kernel/ptrace.c b/arch/tile/kernel/ptrace.c
index 9cd29884c09f..e92e40527d6d 100644
--- a/arch/tile/kernel/ptrace.c
+++ b/arch/tile/kernel/ptrace.c
@@ -50,10 +50,10 @@ long arch_ptrace(struct task_struct *child, long request,
 {
 	unsigned long __user *datap = (long __user __force *)data;
 	unsigned long tmp;
-	int i;
 	long ret = -EIO;
-	unsigned long *childregs;
 	char *childreg;
+	struct pt_regs copyregs;
+	int ex1_offset;
 
 	switch (request) {
 
@@ -80,6 +80,16 @@ long arch_ptrace(struct task_struct *child, long request,
 		if (addr >= PTREGS_SIZE)
 			break;
 		childreg = (char *)task_pt_regs(child) + addr;
+
+		/* Guard against overwrites of the privilege level. */
+		ex1_offset = PTREGS_OFFSET_EX1;
+#if defined(CONFIG_COMPAT) && defined(__BIG_ENDIAN)
+		if (is_compat_task())   /* point at low word */
+			ex1_offset += sizeof(compat_long_t);
+#endif
+		if (addr == ex1_offset)
+			data = PL_ICS_EX1(USER_PL, EX1_ICS(data));
+
 #ifdef CONFIG_COMPAT
 		if (is_compat_task()) {
 			if (addr & (sizeof(compat_long_t)-1))
@@ -96,26 +106,19 @@ long arch_ptrace(struct task_struct *child, long request,
 		break;
 
 	case PTRACE_GETREGS:  /* Get all registers from the child. */
-		if (!access_ok(VERIFY_WRITE, datap, PTREGS_SIZE))
-			break;
-		childregs = (long *)task_pt_regs(child);
-		for (i = 0; i < sizeof(struct pt_regs)/sizeof(unsigned long);
-				++i) {
-			ret = __put_user(childregs[i], &datap[i]);
-			if (ret != 0)
-				break;
+		if (copy_to_user(datap, task_pt_regs(child),
+				 sizeof(struct pt_regs)) == 0) {
+			ret = 0;
 		}
 		break;
 
 	case PTRACE_SETREGS:  /* Set all registers in the child. */
-		if (!access_ok(VERIFY_READ, datap, PTREGS_SIZE))
-			break;
-		childregs = (long *)task_pt_regs(child);
-		for (i = 0; i < sizeof(struct pt_regs)/sizeof(unsigned long);
-				++i) {
-			ret = __get_user(childregs[i], &datap[i]);
-			if (ret != 0)
-				break;
+		if (copy_from_user(&copyregs, datap,
+				   sizeof(struct pt_regs)) == 0) {
+			copyregs.ex1 =
+				PL_ICS_EX1(USER_PL, EX1_ICS(copyregs.ex1));
+			*task_pt_regs(child) = copyregs;
+			ret = 0;
 		}
 		break;
 
diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c
index 704ce0bce833..687719d4abd1 100644
--- a/arch/tile/kernel/signal.c
+++ b/arch/tile/kernel/signal.c
@@ -71,6 +71,9 @@ int restore_sigcontext(struct pt_regs *regs,
 	for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i)
 		err |= __get_user(regs->regs[i], &sc->gregs[i]);
 
+	/* Ensure that the PL is always set to USER_PL. */
+	regs->ex1 = PL_ICS_EX1(USER_PL, EX1_ICS(regs->ex1));
+
 	regs->faultnum = INT_SWINT_1_SIGRETURN;
 
 	err |= __get_user(*pr0, &sc->gregs[0]);

From 2c7387ef9969bb073c25ecbdcc5be30770267b16 Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Thu, 28 Oct 2010 16:07:07 -0400
Subject: [PATCH 0078/1066] asm-generic/stat.h: support 64-bit file time_t for
 stat()

The existing asm-generic/stat.h specifies st_mtime, etc., as a 32-value,
and works well for 32-bit architectures (currently microblaze, score,
and 32-bit tile).  However, for 64-bit architectures it isn't sufficient
to return 32 bits of time_t; this isn't good insurance against the 2037
rollover.  (It also makes glibc support less convenient, since we can't
use glibc's handy STAT_IS_KERNEL_STAT mode.)

This change extends the two "timespec" fields for each of the three atime,
mtime, and ctime fields from "int" to "long".  As a result, on 32-bit
platforms nothing changes, and 64-bit platforms will now work as expected.

The only wrinkle is 32-bit userspace under 64-bit kernels taking advantage
of COMPAT mode.  For these, we leave the "struct stat64" definitions with
the "int" versions of the time_t and nsec fields, so that architectures
can implement compat_sys_stat64() and friends with sys_stat64(), etc.,
and get the expected 32-bit structure layout.  This requires a
field-by-field copy in the kernel, implemented by the code guarded
under __ARCH_WANT_STAT64.

This does mean that the shape of the "struct stat" and "struct stat64"
structures is different on a 64-bit kernel, but only one of the two
structures should ever be used by any given process: "struct stat"
is meant for 64-bit userspace only, and "struct stat64" for 32-bit
userspace only.  (On a 32-bit kernel the two structures continue to have
the same shape, since "long" is 32 bits.)

The alternative is keeping the two structures the same shape on 64-bit
kernels, which means a 64-bit time_t in "struct stat64" for 32-bit
processes.  This is a little unnatural since 32-bit userspace can't
do anything with 64 bits of time_t information, since time_t is just
"long", not "int64_t"; and in any case 32-bit userspace might expect
to be running under a 32-bit kernel, which can't provide the high 32
bits anyway.  In the case of a 32-bit kernel we'd then be extending the
kernel's 32-bit time_t to 64 bits, then truncating it back to 32 bits
again in userspace, for no particular reason.  And, as mentioned above,
if we have 64-bit time_t for 32-bit processes we can't easily use glibc's
STAT_IS_KERNEL_STAT, since glibc's stat structure requires an embedded
"struct timespec", which is a pair of "long" (32-bit) values in a 32-bit
userspace.  "Inventive" solutions are possible, but are pretty hacky.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/tile/include/asm/stat.h   |  3 +++
 arch/tile/include/asm/unistd.h |  1 +
 arch/tile/kernel/compat.c      | 10 +++++-----
 include/asm-generic/stat.h     | 14 +++++++-------
 4 files changed, 16 insertions(+), 12 deletions(-)

diff --git a/arch/tile/include/asm/stat.h b/arch/tile/include/asm/stat.h
index 3dc90fa92c70..b16e5db8f0e7 100644
--- a/arch/tile/include/asm/stat.h
+++ b/arch/tile/include/asm/stat.h
@@ -1 +1,4 @@
+#ifdef CONFIG_COMPAT
+#define __ARCH_WANT_STAT64	/* Used for compat_sys_stat64() etc. */
+#endif
 #include <asm-generic/stat.h>
diff --git a/arch/tile/include/asm/unistd.h b/arch/tile/include/asm/unistd.h
index f2e3ff485333..b35c2db71199 100644
--- a/arch/tile/include/asm/unistd.h
+++ b/arch/tile/include/asm/unistd.h
@@ -41,6 +41,7 @@ __SYSCALL(__NR_cmpxchg_badaddr, sys_cmpxchg_badaddr)
 #ifdef CONFIG_COMPAT
 #define __ARCH_WANT_SYS_LLSEEK
 #endif
+#define __ARCH_WANT_SYS_NEWFSTATAT
 #endif
 
 #endif /* _ASM_TILE_UNISTD_H */
diff --git a/arch/tile/kernel/compat.c b/arch/tile/kernel/compat.c
index 77739cdd9462..67617a05e602 100644
--- a/arch/tile/kernel/compat.c
+++ b/arch/tile/kernel/compat.c
@@ -148,11 +148,11 @@ long tile_compat_sys_msgrcv(int msqid,
 #define compat_sys_readahead sys32_readahead
 #define compat_sys_sync_file_range compat_sys_sync_file_range2
 
-/* The native 64-bit "struct stat" matches the 32-bit "struct stat64". */
-#define compat_sys_stat64 sys_newstat
-#define compat_sys_lstat64 sys_newlstat
-#define compat_sys_fstat64 sys_newfstat
-#define compat_sys_fstatat64 sys_newfstatat
+/* We leverage the "struct stat64" type for 32-bit time_t/nsec. */
+#define compat_sys_stat64 sys_stat64
+#define compat_sys_lstat64 sys_lstat64
+#define compat_sys_fstat64 sys_fstat64
+#define compat_sys_fstatat64 sys_fstatat64
 
 /* The native sys_ptrace dynamically handles compat binaries. */
 #define compat_sys_ptrace sys_ptrace
diff --git a/include/asm-generic/stat.h b/include/asm-generic/stat.h
index 47e64170305d..bd8cad21998e 100644
--- a/include/asm-generic/stat.h
+++ b/include/asm-generic/stat.h
@@ -33,18 +33,18 @@ struct stat {
 	int		st_blksize;	/* Optimal block size for I/O.  */
 	int		__pad2;
 	long		st_blocks;	/* Number 512-byte blocks allocated. */
-	int		st_atime;	/* Time of last access.  */
-	unsigned int	st_atime_nsec;
-	int		st_mtime;	/* Time of last modification.  */
-	unsigned int	st_mtime_nsec;
-	int		st_ctime;	/* Time of last status change.  */
-	unsigned int	st_ctime_nsec;
+	long		st_atime;	/* Time of last access.  */
+	unsigned long	st_atime_nsec;
+	long		st_mtime;	/* Time of last modification.  */
+	unsigned long	st_mtime_nsec;
+	long		st_ctime;	/* Time of last status change.  */
+	unsigned long	st_ctime_nsec;
 	unsigned int	__unused4;
 	unsigned int	__unused5;
 };
 
-#if __BITS_PER_LONG != 64
 /* This matches struct stat64 in glibc2.1. Only used for 32 bit. */
+#if __BITS_PER_LONG != 64 || defined(__ARCH_WANT_STAT64)
 struct stat64 {
 	unsigned long long st_dev;	/* Device.  */
 	unsigned long long st_ino;	/* File serial number.  */

From d02db4f8d79c5841ba32b326edb75ea6acd081ca Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Mon, 1 Nov 2010 12:46:10 -0400
Subject: [PATCH 0079/1066] arch/tile: mark "hardwall" device as non-seekable

Arnd's recent patch series tagged this device with noop_llseek,
conservatively.  In fact, it should be no_llseek, which we arrange
for by opening the device with nonseekable_open().

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 arch/tile/kernel/hardwall.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/tile/kernel/hardwall.c b/arch/tile/kernel/hardwall.c
index 70b829a15ae5..e910530436e6 100644
--- a/arch/tile/kernel/hardwall.c
+++ b/arch/tile/kernel/hardwall.c
@@ -768,13 +768,13 @@ static int hardwall_release(struct inode *inode, struct file *file)
 }
 
 static const struct file_operations dev_hardwall_fops = {
+	.open           = nonseekable_open,
 	.unlocked_ioctl = hardwall_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl   = hardwall_compat_ioctl,
 #endif
 	.flush          = hardwall_flush,
 	.release        = hardwall_release,
-	.llseek		= noop_llseek,
 };
 
 static struct cdev hardwall_dev;

From df32cc193ad88f7b1326b90af799c927b27f7654 Mon Sep 17 00:00:00 2001
From: Tom Herbert <therbert@google.com>
Date: Mon, 1 Nov 2010 12:55:52 -0700
Subject: [PATCH 0080/1066] net: check queue_index from sock is valid for
 device

In dev_pick_tx recompute the queue index if the value stored in the
socket is greater than or equal to the number of real queues for the
device.  The saved index in the sock structure is not guaranteed to
be appropriate for the egress device (this could happen on a route
change or in presence of tunnelling).  The result of the queue index
being bad would be to return a bogus queue (crash could prersumably
follow).

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 35dfb8318483..0dd54a69dace 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2131,7 +2131,7 @@ static struct netdev_queue *dev_pick_tx(struct net_device *dev,
 	} else {
 		struct sock *sk = skb->sk;
 		queue_index = sk_tx_queue_get(sk);
-		if (queue_index < 0) {
+		if (queue_index < 0 || queue_index >= dev->real_num_tx_queues) {
 
 			queue_index = 0;
 			if (dev->real_num_tx_queues > 1)

From 20f95e0b22ea45c1798261064baab57efeb3b3bc Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 1 Nov 2010 16:10:48 -0400
Subject: [PATCH 0081/1066] sh: intc: Update for single IRQ reservation helper.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/sh/intc/core.c    | 2 +-
 drivers/sh/intc/dynamic.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c
index 873a99ff8f64..e5e9e6735f7d 100644
--- a/drivers/sh/intc/core.c
+++ b/drivers/sh/intc/core.c
@@ -79,7 +79,7 @@ static void __init intc_register_irq(struct intc_desc *desc,
 	 * Register the IRQ position with the global IRQ map, then insert
 	 * it in to the radix tree.
 	 */
-	irq_reserve_irqs(irq, 1);
+	irq_reserve_irq(irq);
 
 	raw_spin_lock_irqsave(&intc_big_lock, flags);
 	radix_tree_insert(&d->tree, enum_id, intc_irq_xlate_get(irq));
diff --git a/drivers/sh/intc/dynamic.c b/drivers/sh/intc/dynamic.c
index 4187cce20ffd..a3677c9dfe36 100644
--- a/drivers/sh/intc/dynamic.c
+++ b/drivers/sh/intc/dynamic.c
@@ -60,5 +60,5 @@ void reserve_intc_vectors(struct intc_vect *vectors, unsigned int nr_vecs)
 	int i;
 
 	for (i = 0; i < nr_vecs; i++)
-		irq_reserve_irqs(evt2irq(vectors[i].vect), 1);
+		irq_reserve_irq(evt2irq(vectors[i].vect));
 }

From d3d2a7df2b0f74dddf245e51453f1399efabb28a Mon Sep 17 00:00:00 2001
From: Divy Le Ray <divy@chelsio.com>
Date: Mon, 1 Nov 2010 10:59:41 +0000
Subject: [PATCH 0082/1066] cxgb3: remove call to stop TX queues at load time.

Remove racy queue stopping after device registration.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb3/cxgb3_main.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 407d4e272075..046d846c652d 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -3341,7 +3341,6 @@ static int __devinit init_one(struct pci_dev *pdev,
 				adapter->name = adapter->port[i]->name;
 
 			__set_bit(i, &adapter->registered_device_map);
-			netif_tx_stop_all_queues(adapter->port[i]);
 		}
 	}
 	if (!adapter->registered_device_map) {

From 0a4201fcd49a859b686e0d7a31891ced0fe3a5ff Mon Sep 17 00:00:00 2001
From: Divy Le Ray <divy@chelsio.com>
Date: Mon, 1 Nov 2010 10:59:46 +0000
Subject: [PATCH 0083/1066] cxgb4: remove call to stop TX queues at load time.

Remove racy queue stopping after device registration.

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb4/cxgb4_main.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/cxgb4/cxgb4_main.c b/drivers/net/cxgb4/cxgb4_main.c
index f17703f410b3..f50bc98310f8 100644
--- a/drivers/net/cxgb4/cxgb4_main.c
+++ b/drivers/net/cxgb4/cxgb4_main.c
@@ -3736,7 +3736,6 @@ static int __devinit init_one(struct pci_dev *pdev,
 
 			__set_bit(i, &adapter->registered_device_map);
 			adapter->chan_map[adap2pinfo(adapter, i)->tx_chan] = i;
-			netif_tx_stop_all_queues(adapter->port[i]);
 		}
 	}
 	if (!adapter->registered_device_map) {

From 6c6cf422a2cc49ba11014dcd529ef776f4fcb013 Mon Sep 17 00:00:00 2001
From: Divy Le Ray <divy@chelsio.com>
Date: Mon, 1 Nov 2010 10:59:51 +0000
Subject: [PATCH 0084/1066] cxgb4vf: remove call to stop TX queues at load
 time.

Stopping TX queues at driver load time is not necessary.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb4vf/cxgb4vf_main.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
index 555ecc5a2e93..6de5e2e448a5 100644
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/cxgb4vf/cxgb4vf_main.c
@@ -2600,7 +2600,6 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
 		pi->xact_addr_filt = -1;
 		pi->rx_offload = RX_CSO;
 		netif_carrier_off(netdev);
-		netif_tx_stop_all_queues(netdev);
 		netdev->irq = pdev->irq;
 
 		netdev->features = (NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |

From df9f86faf3ee610527ed02031fe7dd3c8b752e44 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Mon, 1 Nov 2010 15:49:23 -0700
Subject: [PATCH 0085/1066] ceph: fix small seq message skipping

If the client gets out of sync with the server message sequence number, we
normally skip low seq messages (ones we already received).  The skip code
was also incrementing the expected seq, such that all subsequent messages
also appeared old and got skipped, and an eventual timeout on the osd
connection.  This resulted in some lagging requests and console messages
like

[233480.882885] ceph: skipping osd22 10.138.138.13:6804 seq 2016, expected 2017
[233480.882919] ceph: skipping osd22 10.138.138.13:6804 seq 2017, expected 2018
[233480.882963] ceph: skipping osd22 10.138.138.13:6804 seq 2018, expected 2019
[233480.883488] ceph: skipping osd22 10.138.138.13:6804 seq 2019, expected 2020
[233485.219558] ceph: skipping osd22 10.138.138.13:6804 seq 2020, expected 2021
[233485.906595] ceph: skipping osd22 10.138.138.13:6804 seq 2021, expected 2022
[233490.379536] ceph: skipping osd22 10.138.138.13:6804 seq 2022, expected 2023
[233495.523260] ceph: skipping osd22 10.138.138.13:6804 seq 2023, expected 2024
[233495.923194] ceph: skipping osd22 10.138.138.13:6804 seq 2024, expected 2025
[233500.534614] ceph:  tid 6023602 timed out on osd22, will reset osd

Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sage Weil <sage@newdream.net>
---
 net/ceph/messenger.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index 0e8157ee5d43..d379abf873bc 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -1532,14 +1532,13 @@ static int read_partial_message(struct ceph_connection *con)
 	/* verify seq# */
 	seq = le64_to_cpu(con->in_hdr.seq);
 	if ((s64)seq - (s64)con->in_seq < 1) {
-		pr_info("skipping %s%lld %s seq %lld, expected %lld\n",
+		pr_info("skipping %s%lld %s seq %lld expected %lld\n",
 			ENTITY_NAME(con->peer_name),
 			ceph_pr_addr(&con->peer_addr.in_addr),
 			seq, con->in_seq + 1);
 		con->in_base_pos = -front_len - middle_len - data_len -
 			sizeof(m->footer);
 		con->in_tag = CEPH_MSGR_TAG_READY;
-		con->in_seq++;
 		return 0;
 	} else if ((s64)seq - (s64)con->in_seq > 1) {
 		pr_err("read_partial_message bad seq %lld expected %lld\n",

From 50ae28f0144a790fc63a5b89b9aca3ffa9f88522 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Mon, 1 Nov 2010 16:08:55 +0100
Subject: [PATCH 0086/1066] FS: cifs, remove unneeded NULL tests

Stanse found that pSMBFile in cifs_ioctl and file->f_path.dentry in
cifs_user_write are dereferenced prior their test to NULL.

The alternative is not to dereference them before the tests. The patch is
to point out the problem, you have to decide.

While at it we cache the inode in cifs_user_write to a local variable
and use all over the function.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Steve French <sfrench@samba.org>
Cc: linux-cifs@vger.kernel.org
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/file.c  | 25 +++++++++++--------------
 fs/cifs/ioctl.c |  4 ----
 2 files changed, 11 insertions(+), 18 deletions(-)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index ae82159cf7fa..5d06eb3078de 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -956,6 +956,7 @@ cifs_update_eof(struct cifsInodeInfo *cifsi, loff_t offset,
 ssize_t cifs_user_write(struct file *file, const char __user *write_data,
 	size_t write_size, loff_t *poffset)
 {
+	struct inode *inode = file->f_path.dentry->d_inode;
 	int rc = 0;
 	unsigned int bytes_written = 0;
 	unsigned int total_written;
@@ -963,7 +964,7 @@ ssize_t cifs_user_write(struct file *file, const char __user *write_data,
 	struct cifsTconInfo *pTcon;
 	int xid, long_op;
 	struct cifsFileInfo *open_file;
-	struct cifsInodeInfo *cifsi = CIFS_I(file->f_path.dentry->d_inode);
+	struct cifsInodeInfo *cifsi = CIFS_I(inode);
 
 	cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
 
@@ -1029,21 +1030,17 @@ ssize_t cifs_user_write(struct file *file, const char __user *write_data,
 
 	cifs_stats_bytes_written(pTcon, total_written);
 
-	/* since the write may have blocked check these pointers again */
-	if ((file->f_path.dentry) && (file->f_path.dentry->d_inode)) {
-		struct inode *inode = file->f_path.dentry->d_inode;
 /* Do not update local mtime - server will set its actual value on write
- *		inode->i_ctime = inode->i_mtime =
- * 			current_fs_time(inode->i_sb);*/
-		if (total_written > 0) {
-			spin_lock(&inode->i_lock);
-			if (*poffset > file->f_path.dentry->d_inode->i_size)
-				i_size_write(file->f_path.dentry->d_inode,
-					*poffset);
-			spin_unlock(&inode->i_lock);
-		}
-		mark_inode_dirty_sync(file->f_path.dentry->d_inode);
+ *	inode->i_ctime = inode->i_mtime =
+ * 		current_fs_time(inode->i_sb);*/
+	if (total_written > 0) {
+		spin_lock(&inode->i_lock);
+		if (*poffset > inode->i_size)
+			i_size_write(inode, *poffset);
+		spin_unlock(&inode->i_lock);
 	}
+	mark_inode_dirty_sync(inode);
+
 	FreeXid(xid);
 	return total_written;
 }
diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c
index 077bf756f342..2fa22f20cfc5 100644
--- a/fs/cifs/ioctl.c
+++ b/fs/cifs/ioctl.c
@@ -63,8 +63,6 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg)
 #ifdef CONFIG_CIFS_POSIX
 		case FS_IOC_GETFLAGS:
 			if (CIFS_UNIX_EXTATTR_CAP & caps) {
-				if (pSMBFile == NULL)
-					break;
 				rc = CIFSGetExtAttr(xid, tcon, pSMBFile->netfid,
 					&ExtAttrBits, &ExtAttrMask);
 				if (rc == 0)
@@ -80,8 +78,6 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg)
 					rc = -EFAULT;
 					break;
 				}
-				if (pSMBFile == NULL)
-					break;
 				/* rc= CIFSGetExtAttr(xid,tcon,pSMBFile->netfid,
 					extAttrBits, &ExtAttrMask);*/
 			}

From f0573e6db1d1e637e20011f40264b2f5b5880587 Mon Sep 17 00:00:00 2001
From: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Date: Mon, 1 Nov 2010 18:00:03 +0100
Subject: [PATCH 0087/1066] mach-pcm037_eet: Fix section mismatch for
 eet_init_devices()

This function should be marked as __init because it is used only
in the init phase.

This fix the compiler warning:
 LD      arch/arm/mach-mx3/built-in.o
 WARNING: arch/arm/mach-mx3/built-in.o(.text+0x1328): Section mismatch in reference from the function eet_init_devices() to the (unknown reference) .init.rodata:(unknown)
 The function eet_init_devices() references
 the (unknown reference) __initconst (unknown).
 This is often because eet_init_devices lacks a __initconst
 annotation or the annotation of (unknown) is wrong.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mach-pcm037_eet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 99e0894e07db..3392812a55f7 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -171,7 +171,7 @@ static struct platform_device pcm037_gpio_keys_device = {
 	},
 };
 
-static int eet_init_devices(void)
+static int __init eet_init_devices(void)
 {
 	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
 		return 0;

From 0aa992777270f0ea7097170fa50a1d98615eb0d4 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue, 2 Nov 2010 09:20:50 +0000
Subject: [PATCH 0088/1066] drm/i915: Allow powersave modparam to be adjusted
 at runtime.

2.6.36 appears to respect the 0400 mode we assigned to the parameter
preventing it from being adjusted after loading. However, this is safe
to adjust at runtime.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31311
Reported-by: Fernando Lemos <fernandotcl@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 3467dd420760..80745f85902c 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -44,7 +44,7 @@ unsigned int i915_fbpercrtc = 0;
 module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
 
 unsigned int i915_powersave = 1;
-module_param_named(powersave, i915_powersave, int, 0400);
+module_param_named(powersave, i915_powersave, int, 0600);
 
 unsigned int i915_lvds_downclock = 0;
 module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);

From 80dbf4b72b0bcac71fc683914293555edb7bc7ee Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Mon, 1 Nov 2010 14:12:01 -0700
Subject: [PATCH 0089/1066] drm/i915: Fix the graphics frequency clamping at
 init and when IPS is active.

Part of the issue here was that Eric slipped in a debug hack for
testing the i915 IPS code before the intel_ips.c driver had landed.
This caused the driver to always use the full range of frequencies,
which is only legal when IPS tells us we have the headroom.  Once that
hack was removed, there was confusion about the driver's frequency
clamping variables: max_delay is the driver's current limit on the
highest frequency the IPS driver wants us to use, while dev_priv->fmax
is the hardware-reported limit that the IPS driver can increase up to.

Tested with IPS driver loaded or not.  Note that on Ironlake systems
without the IPS driver loaded this will result in a performance
reduction, and the inital warmup of frequency limits can impact
benchmarking on systems with IPS loaded.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
[ickle: demoted a debugging printk]
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_display.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 990f065374b2..528aa06d430d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5581,20 +5581,19 @@ void ironlake_enable_drps(struct drm_device *dev)
 	fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
 	fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
 		MEMMODE_FSTART_SHIFT;
-	fstart = fmax;
 
 	vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
 		PXVFREQ_PX_SHIFT;
 
-	dev_priv->fmax = fstart; /* IPS callback will increase this */
+	dev_priv->fmax = fmax; /* IPS callback will increase this */
 	dev_priv->fstart = fstart;
 
-	dev_priv->max_delay = fmax;
+	dev_priv->max_delay = fstart;
 	dev_priv->min_delay = fmin;
 	dev_priv->cur_delay = fstart;
 
-	DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", fmax, fmin,
-			 fstart);
+	DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n",
+			 fmax, fmin, fstart);
 
 	I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
 

From 5588978882b5f4b81169bd7f9bc941e3a12ee8ba Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue, 2 Nov 2010 10:38:58 +0000
Subject: [PATCH 0090/1066] drm/i915: SNB BLT workaround

On some stepping of SNB cpu, the first command to be parsed in BLT
command streamer should be MI_BATCHBUFFER_START otherwise the GPU
may hang.

(cherry picked from commit 8d19215be8254f4f75e9c5a0d28345947b0382db)

Conflicts:

	drivers/gpu/drm/i915/intel_ringbuffer.c
	drivers/gpu/drm/i915/intel_ringbuffer.h

Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_ringbuffer.c | 116 +++++++++++++++++++++++-
 drivers/gpu/drm/i915/intel_ringbuffer.h |   3 +
 2 files changed, 116 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 09f2dc353ae2..7c1f3ff2f788 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -654,6 +654,10 @@ void intel_cleanup_ring_buffer(struct drm_device *dev,
 	i915_gem_object_unpin(ring->gem_object);
 	drm_gem_object_unreference(ring->gem_object);
 	ring->gem_object = NULL;
+
+	if (ring->cleanup)
+		ring->cleanup(ring);
+
 	cleanup_status_page(dev, ring);
 }
 
@@ -854,19 +858,125 @@ blt_ring_put_user_irq(struct drm_device *dev,
 	/* do nothing */
 }
 
+
+/* Workaround for some stepping of SNB,
+ * each time when BLT engine ring tail moved,
+ * the first command in the ring to be parsed
+ * should be MI_BATCH_BUFFER_START
+ */
+#define NEED_BLT_WORKAROUND(dev) \
+	(IS_GEN6(dev) && (dev->pdev->revision < 8))
+
+static inline struct drm_i915_gem_object *
+to_blt_workaround(struct intel_ring_buffer *ring)
+{
+	return ring->private;
+}
+
+static int blt_ring_init(struct drm_device *dev,
+			 struct intel_ring_buffer *ring)
+{
+	if (NEED_BLT_WORKAROUND(dev)) {
+		struct drm_i915_gem_object *obj;
+		u32 __iomem *ptr;
+		int ret;
+
+		obj = to_intel_bo(i915_gem_alloc_object(dev, 4096));
+		if (obj == NULL)
+			return -ENOMEM;
+
+		ret = i915_gem_object_pin(&obj->base, 4096);
+		if (ret) {
+			drm_gem_object_unreference(&obj->base);
+			return ret;
+		}
+
+		ptr = kmap(obj->pages[0]);
+		iowrite32(MI_BATCH_BUFFER_END, ptr);
+		iowrite32(MI_NOOP, ptr+1);
+		kunmap(obj->pages[0]);
+
+		ret = i915_gem_object_set_to_gtt_domain(&obj->base, false);
+		if (ret) {
+			i915_gem_object_unpin(&obj->base);
+			drm_gem_object_unreference(&obj->base);
+			return ret;
+		}
+
+		ring->private = obj;
+	}
+
+	return init_ring_common(dev, ring);
+}
+
+static void blt_ring_begin(struct drm_device *dev,
+			   struct intel_ring_buffer *ring,
+			  int num_dwords)
+{
+	if (ring->private) {
+		intel_ring_begin(dev, ring, num_dwords+2);
+		intel_ring_emit(dev, ring, MI_BATCH_BUFFER_START);
+		intel_ring_emit(dev, ring, to_blt_workaround(ring)->gtt_offset);
+	} else
+		intel_ring_begin(dev, ring, 4);
+}
+
+static void blt_ring_flush(struct drm_device *dev,
+			   struct intel_ring_buffer *ring,
+			   u32 invalidate_domains,
+			   u32 flush_domains)
+{
+	blt_ring_begin(dev, ring, 4);
+	intel_ring_emit(dev, ring, MI_FLUSH_DW);
+	intel_ring_emit(dev, ring, 0);
+	intel_ring_emit(dev, ring, 0);
+	intel_ring_emit(dev, ring, 0);
+	intel_ring_advance(dev, ring);
+}
+
+static u32
+blt_ring_add_request(struct drm_device *dev,
+		     struct intel_ring_buffer *ring,
+		     u32 flush_domains)
+{
+	u32 seqno = i915_gem_get_seqno(dev);
+
+	blt_ring_begin(dev, ring, 4);
+	intel_ring_emit(dev, ring, MI_STORE_DWORD_INDEX);
+	intel_ring_emit(dev, ring,
+			I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+	intel_ring_emit(dev, ring, seqno);
+	intel_ring_emit(dev, ring, MI_USER_INTERRUPT);
+	intel_ring_advance(dev, ring);
+
+	DRM_DEBUG_DRIVER("%s %d\n", ring->name, seqno);
+	return seqno;
+}
+
+static void blt_ring_cleanup(struct intel_ring_buffer *ring)
+{
+	if (!ring->private)
+		return;
+
+	i915_gem_object_unpin(ring->private);
+	drm_gem_object_unreference(ring->private);
+	ring->private = NULL;
+}
+
 static const struct intel_ring_buffer gen6_blt_ring = {
        .name			= "blt ring",
        .id			= RING_BLT,
        .mmio_base		= BLT_RING_BASE,
        .size			= 32 * PAGE_SIZE,
-       .init			= init_ring_common,
+       .init			= blt_ring_init,
        .write_tail		= ring_write_tail,
-       .flush			= gen6_ring_flush,
-       .add_request		= ring_add_request,
+       .flush			= blt_ring_flush,
+       .add_request		= blt_ring_add_request,
        .get_seqno		= ring_status_page_get_seqno,
        .user_irq_get		= blt_ring_get_user_irq,
        .user_irq_put		= blt_ring_put_user_irq,
        .dispatch_gem_execbuffer	= gen6_ring_dispatch_gem_execbuffer,
+       .cleanup			= blt_ring_cleanup,
 };
 
 int intel_init_render_ring_buffer(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index a05aff0e5764..3126c2681983 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -63,6 +63,7 @@ struct  intel_ring_buffer {
 			struct drm_i915_gem_execbuffer2 *exec,
 			struct drm_clip_rect *cliprects,
 			uint64_t exec_offset);
+	void		(*cleanup)(struct intel_ring_buffer *ring);
 
 	/**
 	 * List of objects currently involved in rendering from the
@@ -98,6 +99,8 @@ struct  intel_ring_buffer {
 
 	wait_queue_head_t irq_queue;
 	drm_local_map_t map;
+
+	void *private;
 };
 
 static inline u32

From c64e38ea17a81721da0393584fd807f8434050fa Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 1 Nov 2010 14:32:27 -0400
Subject: [PATCH 0091/1066] xen/blkfront: map REQ_FLUSH into a full barrier

Implement a flush as a full barrier, since we have nothing weaker.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Christoph Hellwig <hch@lst.de>
---
 drivers/block/xen-blkfront.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 06e2812ba124..3a318d8576c5 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -245,14 +245,11 @@ static int blkif_ioctl(struct block_device *bdev, fmode_t mode,
 }
 
 /*
- * blkif_queue_request
+ * Generate a Xen blkfront IO request from a blk layer request.  Reads
+ * and writes are handled as expected.  Since we lack a loose flush
+ * request, we map flushes into a full ordered barrier.
  *
- * request block io
- *
- * id: for guest use only.
- * operation: BLKIF_OP_{READ,WRITE,PROBE}
- * buffer: buffer to read/write into. this should be a
- *   virtual address in the guest os.
+ * @req: a request struct
  */
 static int blkif_queue_request(struct request *req)
 {
@@ -289,7 +286,7 @@ static int blkif_queue_request(struct request *req)
 
 	ring_req->operation = rq_data_dir(req) ?
 		BLKIF_OP_WRITE : BLKIF_OP_READ;
-	if (req->cmd_flags & REQ_HARDBARRIER)
+	if (req->cmd_flags & REQ_FLUSH)
 		ring_req->operation = BLKIF_OP_WRITE_BARRIER;
 
 	ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
@@ -1069,14 +1066,8 @@ static void blkfront_connect(struct blkfront_info *info)
 	 */
 	info->feature_flush = 0;
 
-	/*
-	 * The driver doesn't properly handled empty flushes, so
-	 * lets disable barrier support for now.
-	 */
-#if 0
 	if (!err && barrier)
 		info->feature_flush = REQ_FLUSH;
-#endif
 
 	err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size);
 	if (err) {

From a945b9801a9bfd4a98bcfd9f6656b5027b254e3f Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 1 Nov 2010 17:03:14 -0400
Subject: [PATCH 0092/1066] xen/blkfront: change blk_shadow.request to proper
 pointer

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/block/xen-blkfront.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 3a318d8576c5..31c8a643d109 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -65,7 +65,7 @@ enum blkif_state {
 
 struct blk_shadow {
 	struct blkif_request req;
-	unsigned long request;
+	struct request *request;
 	unsigned long frame[BLKIF_MAX_SEGMENTS_PER_REQUEST];
 };
 
@@ -136,7 +136,7 @@ static void add_id_to_freelist(struct blkfront_info *info,
 			       unsigned long id)
 {
 	info->shadow[id].req.id  = info->shadow_free;
-	info->shadow[id].request = 0;
+	info->shadow[id].request = NULL;
 	info->shadow_free = id;
 }
 
@@ -278,7 +278,7 @@ static int blkif_queue_request(struct request *req)
 	/* Fill out a communications ring structure. */
 	ring_req = RING_GET_REQUEST(&info->ring, info->ring.req_prod_pvt);
 	id = get_id_from_freelist(info);
-	info->shadow[id].request = (unsigned long)req;
+	info->shadow[id].request = req;
 
 	ring_req->id = id;
 	ring_req->sector_number = (blkif_sector_t)blk_rq_pos(req);
@@ -633,7 +633,7 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
 
 		bret = RING_GET_RESPONSE(&info->ring, i);
 		id   = bret->id;
-		req  = (struct request *)info->shadow[id].request;
+		req  = info->shadow[id].request;
 
 		blkif_completion(&info->shadow[id]);
 
@@ -898,7 +898,7 @@ static int blkif_recover(struct blkfront_info *info)
 	/* Stage 3: Find pending requests and requeue them. */
 	for (i = 0; i < BLK_RING_SIZE; i++) {
 		/* Not in use? */
-		if (copy[i].request == 0)
+		if (!copy[i].request)
 			continue;
 
 		/* Grab a request slot and copy shadow state into it. */
@@ -915,9 +915,7 @@ static int blkif_recover(struct blkfront_info *info)
 				req->seg[j].gref,
 				info->xbdev->otherend_id,
 				pfn_to_mfn(info->shadow[req->id].frame[j]),
-				rq_data_dir(
-					(struct request *)
-					info->shadow[req->id].request));
+				rq_data_dir(info->shadow[req->id].request));
 		info->shadow[req->id].req = *req;
 
 		info->ring.req_prod_pvt++;

From be2f8373c188ed1f5d36003c9928e4d695213080 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Tue, 2 Nov 2010 10:38:33 -0400
Subject: [PATCH 0093/1066] xen/blkfront: Implement FUA with
 BLKIF_OP_WRITE_BARRIER

The BLKIF_OP_WRITE_BARRIER is a full ordered barrier, so we can use it
to implement FUA as well as a plain FLUSH.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Christoph Hellwig <hch@lst.de>
---
 drivers/block/xen-blkfront.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 31c8a643d109..76b874a79175 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -286,8 +286,18 @@ static int blkif_queue_request(struct request *req)
 
 	ring_req->operation = rq_data_dir(req) ?
 		BLKIF_OP_WRITE : BLKIF_OP_READ;
-	if (req->cmd_flags & REQ_FLUSH)
+
+	if (req->cmd_flags & (REQ_FLUSH | REQ_FUA)) {
+		/*
+		 * Ideally we could just do an unordered
+		 * flush-to-disk, but all we have is a full write
+		 * barrier at the moment.  However, a barrier write is
+		 * a superset of FUA, so we can implement it the same
+		 * way.  (It's also a FLUSH+FUA, since it is
+		 * guaranteed ordered WRT previous writes.)
+		 */
 		ring_req->operation = BLKIF_OP_WRITE_BARRIER;
+	}
 
 	ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
 	BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
@@ -1065,7 +1075,7 @@ static void blkfront_connect(struct blkfront_info *info)
 	info->feature_flush = 0;
 
 	if (!err && barrier)
-		info->feature_flush = REQ_FLUSH;
+		info->feature_flush = REQ_FLUSH | REQ_FUA;
 
 	err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size);
 	if (err) {

From 27d68fbbd555765974052ef2f5a14824da0818fe Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Tue, 2 Nov 2010 07:43:10 -0700
Subject: [PATCH 0094/1066] Staging: solo6x10: fix build problem

With commit 08bff03ed697a583612b62a6ac566bd5bce98012 (V4L/DVB: videobuf:
add ext_lock argument to the queue init functions)
videobuf_queue_sg_init() changed to need another paramater.  This patch
fixes that issue.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/solo6x10/solo6010-v4l2-enc.c | 2 +-
 drivers/staging/solo6x10/solo6010-v4l2.c     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/solo6x10/solo6010-v4l2-enc.c b/drivers/staging/solo6x10/solo6010-v4l2-enc.c
index bbf3d9c4abb0..097e82bc7a63 100644
--- a/drivers/staging/solo6x10/solo6010-v4l2-enc.c
+++ b/drivers/staging/solo6x10/solo6010-v4l2-enc.c
@@ -766,7 +766,7 @@ static int solo_enc_open(struct file *file)
 				    &solo_enc->lock,
 				    V4L2_BUF_TYPE_VIDEO_CAPTURE,
 				    V4L2_FIELD_INTERLACED,
-				    sizeof(struct videobuf_buffer), fh);
+				    sizeof(struct videobuf_buffer), fh, NULL);
 
 	spin_unlock(&solo_enc->lock);
 
diff --git a/drivers/staging/solo6x10/solo6010-v4l2.c b/drivers/staging/solo6x10/solo6010-v4l2.c
index 9731fa02b5e8..6ffd21de837d 100644
--- a/drivers/staging/solo6x10/solo6010-v4l2.c
+++ b/drivers/staging/solo6x10/solo6010-v4l2.c
@@ -437,7 +437,7 @@ static int solo_v4l2_open(struct file *file)
 				    &solo_dev->pdev->dev, &fh->slock,
 				    V4L2_BUF_TYPE_VIDEO_CAPTURE,
 				    SOLO_DISP_PIX_FIELD,
-				    sizeof(struct videobuf_buffer), fh);
+				    sizeof(struct videobuf_buffer), fh, NULL);
 
 	return 0;
 }

From 5c4e0f198d670338daf296e95b7536fdb3489590 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 2 Nov 2010 11:28:33 +0000
Subject: [PATCH 0095/1066] ARM: mach-shmobile: fix sh7372 after a recent clock
 framework rework

The updated sh clock framework has introduced a .nr_freqs element of struct
clk, which has to be initialised with the number of possible frequencies.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/clock-sh7372.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index fe7fa1550d36..7db31e6c6bf2 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -291,6 +291,7 @@ struct clk sh7372_pllc2_clk = {
 	.ops		= &pllc2_clk_ops,
 	.parent		= &extal1_div2_clk,
 	.freq_table	= pllc2_freq_table,
+	.nr_freqs	= ARRAY_SIZE(pllc2_freq_table) - 1,
 	.parent_table	= pllc2_parent,
 	.parent_num	= ARRAY_SIZE(pllc2_parent),
 };

From 239b0b441449b2c70492880e6c6a4a885afa74ba Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Tue, 2 Nov 2010 13:15:53 -0400
Subject: [PATCH 0096/1066] MAINTAINERS: add drivers/char/hvc_tile.c as
 maintained by tile

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0094224ca79b..2525b04f2e25 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5827,6 +5827,7 @@ M:	Chris Metcalf <cmetcalf@tilera.com>
 W:	http://www.tilera.com/scm/
 S:	Supported
 F:	arch/tile/
+F:	drivers/char/hvc_tile.c
 
 TLAN NETWORK DRIVER
 M:	Samuel Chessman <chessman@tux.org>

From dcb8baeceaa1c629bbd06f472cea023ad08a0c33 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Tue, 2 Nov 2010 11:55:58 -0400
Subject: [PATCH 0097/1066] xen/blkfront: cope with backend that fail empty
 BLKIF_OP_WRITE_BARRIER requests

Some(?) Xen block backends fail BLKIF_OP_WRITE_BARRIER requests, which
Linux uses as a cache flush operation.  In that case, disable use
of FLUSH.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Daniel Stodden <daniel.stodden@citrix.com>
---
 drivers/block/xen-blkfront.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 76b874a79175..4f9e22f29138 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -656,6 +656,16 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
 				printk(KERN_WARNING "blkfront: %s: write barrier op failed\n",
 				       info->gd->disk_name);
 				error = -EOPNOTSUPP;
+			}
+			if (unlikely(bret->status == BLKIF_RSP_ERROR &&
+				     info->shadow[id].req.nr_segments == 0)) {
+				printk(KERN_WARNING "blkfront: %s: empty write barrier op failed\n",
+				       info->gd->disk_name);
+				error = -EOPNOTSUPP;
+			}
+			if (unlikely(error)) {
+				if (error == -EOPNOTSUPP)
+					error = 0;
 				info->feature_flush = 0;
 				xlvbd_flush(info);
 			}

From f4245bd4ebf903541ba758ad06c118626d8c6f18 Mon Sep 17 00:00:00 2001
From: Lukas Czerner <lczerner@redhat.com>
Date: Tue, 2 Nov 2010 14:07:17 -0400
Subject: [PATCH 0098/1066] ext4: fix lazyinit hang after removing request

When the request has been removed from the list and no other request
has been issued, we will end up with next wakeup scheduled to
MAX_JIFFY_OFFSET which is bad. So check for that.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/super.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 40131b777af6..8d1d9423ce9a 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -2740,7 +2740,8 @@ cont_thread:
 		if (freezing(current))
 			refrigerator();
 
-		if (time_after_eq(jiffies, next_wakeup)) {
+		if ((time_after_eq(jiffies, next_wakeup)) ||
+		    (MAX_JIFFY_OFFSET == next_wakeup)) {
 			cond_resched();
 			continue;
 		}

From b2c78cd09b6ef78c8f20190f0b3e6df1d3651b70 Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Tue, 2 Nov 2010 14:19:30 -0400
Subject: [PATCH 0099/1066] ext4: "ret" may be used uninitialized in
 ext4_lazyinit_thread()

Newer GCC's reported the following build warning:

   fs/ext4/super.c: In function 'ext4_lazyinit_thread':
   fs/ext4/super.c:2702: warning: 'ret' may be used uninitialized in this function

Fix it by removing the need for the ret variable in the first place.

Signed-off-by: "Lukas Czerner" <lczerner@redhat.com>
Reported-by: "Stefan Richter" <stefanr@s5r6.in-berlin.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/super.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 8d1d9423ce9a..4d7ef31eacb1 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -2699,7 +2699,6 @@ static int ext4_lazyinit_thread(void *arg)
 	struct ext4_li_request *elr;
 	unsigned long next_wakeup;
 	DEFINE_WAIT(wait);
-	int ret;
 
 	BUG_ON(NULL == eli);
 
@@ -2723,13 +2722,12 @@ cont_thread:
 			elr = list_entry(pos, struct ext4_li_request,
 					 lr_request);
 
-			if (time_after_eq(jiffies, elr->lr_next_sched))
-				ret = ext4_run_li_request(elr);
-
-			if (ret) {
-				ret = 0;
-				ext4_remove_li_request(elr);
-				continue;
+			if (time_after_eq(jiffies, elr->lr_next_sched)) {
+				if (ext4_run_li_request(elr) != 0) {
+					/* error, remove the lazy_init job */
+					ext4_remove_li_request(elr);
+					continue;
+				}
 			}
 
 			if (time_before(elr->lr_next_sched, next_wakeup))

From e66673e39ac9d4749bd9676dd1caf928095409f5 Mon Sep 17 00:00:00 2001
From: Pavel Shilovsky <piastryyy@gmail.com>
Date: Tue, 2 Nov 2010 12:00:42 +0300
Subject: [PATCH 0100/1066] CIFS: Add cifs_set_oplock_level

Simplify many places when we need to set oplock level on an inode.

Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifsproto.h |  1 +
 fs/cifs/file.c      | 38 +++++++++-----------------------------
 fs/cifs/misc.c      | 23 ++++++++++++++++++++---
 3 files changed, 30 insertions(+), 32 deletions(-)

diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index edb6d90efdf2..7f050f4fc3d9 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -104,6 +104,7 @@ extern struct timespec cifs_NTtimeToUnix(__le64 utc_nanoseconds_since_1601);
 extern u64 cifs_UnixTimeToNT(struct timespec);
 extern struct timespec cnvrtDosUnixTm(__le16 le_date, __le16 le_time,
 				      int offset);
+extern void cifs_set_oplock_level(struct inode *inode, __u32 oplock);
 
 extern struct cifsFileInfo *cifs_new_fileinfo(__u16 fileHandle,
 				struct file *file, struct tcon_link *tlink,
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 5d06eb3078de..a566f155df49 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -146,12 +146,7 @@ client_can_cache:
 		rc = cifs_get_inode_info(&inode, full_path, buf, inode->i_sb,
 					 xid, NULL);
 
-	if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
-		pCifsInode->clientCanCacheAll = true;
-		pCifsInode->clientCanCacheRead = true;
-		cFYI(1, "Exclusive Oplock granted on inode %p", inode);
-	} else if ((oplock & 0xF) == OPLOCK_READ)
-		pCifsInode->clientCanCacheRead = true;
+	cifs_set_oplock_level(inode, oplock);
 
 	return rc;
 }
@@ -253,12 +248,7 @@ cifs_new_fileinfo(__u16 fileHandle, struct file *file,
 		list_add_tail(&pCifsFile->flist, &pCifsInode->openFileList);
 	spin_unlock(&cifs_file_list_lock);
 
-	if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
-		pCifsInode->clientCanCacheAll = true;
-		pCifsInode->clientCanCacheRead = true;
-		cFYI(1, "Exclusive Oplock inode %p", inode);
-	} else if ((oplock & 0xF) == OPLOCK_READ)
-		pCifsInode->clientCanCacheRead = true;
+	cifs_set_oplock_level(inode, oplock);
 
 	file->private_data = pCifsFile;
 	return pCifsFile;
@@ -271,8 +261,10 @@ cifs_new_fileinfo(__u16 fileHandle, struct file *file,
  */
 void cifsFileInfo_put(struct cifsFileInfo *cifs_file)
 {
+	struct inode *inode = cifs_file->dentry->d_inode;
 	struct cifsTconInfo *tcon = tlink_tcon(cifs_file->tlink);
-	struct cifsInodeInfo *cifsi = CIFS_I(cifs_file->dentry->d_inode);
+	struct cifsInodeInfo *cifsi = CIFS_I(inode);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
 	struct cifsLockInfo *li, *tmp;
 
 	spin_lock(&cifs_file_list_lock);
@@ -288,8 +280,7 @@ void cifsFileInfo_put(struct cifsFileInfo *cifs_file)
 	if (list_empty(&cifsi->openFileList)) {
 		cFYI(1, "closing last open instance for inode %p",
 			cifs_file->dentry->d_inode);
-		cifsi->clientCanCacheRead = false;
-		cifsi->clientCanCacheAll  = false;
+		cifs_set_oplock_level(inode, 0);
 	}
 	spin_unlock(&cifs_file_list_lock);
 
@@ -607,8 +598,6 @@ reopen_success:
 		rc = filemap_write_and_wait(inode->i_mapping);
 		mapping_set_error(inode->i_mapping, rc);
 
-		pCifsInode->clientCanCacheAll = false;
-		pCifsInode->clientCanCacheRead = false;
 		if (tcon->unix_ext)
 			rc = cifs_get_inode_info_unix(&inode,
 				full_path, inode->i_sb, xid);
@@ -622,18 +611,9 @@ reopen_success:
 	     invalidate the current end of file on the server
 	     we can not go to the server to get the new inod
 	     info */
-	if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
-		pCifsInode->clientCanCacheAll = true;
-		pCifsInode->clientCanCacheRead = true;
-		cFYI(1, "Exclusive Oplock granted on inode %p",
-			 pCifsFile->dentry->d_inode);
-	} else if ((oplock & 0xF) == OPLOCK_READ) {
-		pCifsInode->clientCanCacheRead = true;
-		pCifsInode->clientCanCacheAll = false;
-	} else {
-		pCifsInode->clientCanCacheRead = false;
-		pCifsInode->clientCanCacheAll = false;
-	}
+
+	cifs_set_oplock_level(inode, oplock);
+
 	cifs_relock_file(pCifsFile);
 
 reopen_error_exit:
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index c4e296fe3518..d3b9ddebc17e 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -569,10 +569,9 @@ is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv)
 
 				cFYI(1, "file id match, oplock break");
 				pCifsInode = CIFS_I(netfile->dentry->d_inode);
-				pCifsInode->clientCanCacheAll = false;
-				if (pSMB->OplockLevel == 0)
-					pCifsInode->clientCanCacheRead = false;
 
+				cifs_set_oplock_level(netfile->dentry->d_inode,
+						      pSMB->OplockLevel);
 				/*
 				 * cifs_oplock_break_put() can't be called
 				 * from here.  Get reference after queueing
@@ -722,3 +721,21 @@ cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb)
 			   cifs_sb_master_tcon(cifs_sb)->treeName);
 	}
 }
+
+void cifs_set_oplock_level(struct inode *inode, __u32 oplock)
+{
+	struct cifsInodeInfo *cinode = CIFS_I(inode);
+
+	if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
+		cinode->clientCanCacheAll = true;
+		cinode->clientCanCacheRead = true;
+		cFYI(1, "Exclusive Oplock granted on inode %p", inode);
+	} else if ((oplock & 0xF) == OPLOCK_READ) {
+		cinode->clientCanCacheAll = false;
+		cinode->clientCanCacheRead = true;
+		cFYI(1, "Level II Oplock granted on inode %p", inode);
+	} else {
+		cinode->clientCanCacheAll = false;
+		cinode->clientCanCacheRead = false;
+	}
+}

From df098db12ada832c0232ee1f91eff21a8701889c Mon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <bfields@fieldses.org>
Date: Sat, 30 Oct 2010 17:06:21 -0400
Subject: [PATCH 0101/1066] cifs: trivial doc fix: note setlease implemented

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/TODO | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/TODO b/fs/cifs/TODO
index 5aff46c61e52..355abcdcda98 100644
--- a/fs/cifs/TODO
+++ b/fs/cifs/TODO
@@ -81,7 +81,7 @@ u) DOS attrs - returned as pseudo-xattr in Samba format (check VFAT and NTFS for
 
 v) mount check for unmatched uids
 
-w) Add support for new vfs entry points for setlease and fallocate 
+w) Add support for new vfs entry point for fallocate
 
 x) Fix Samba 3 server to handle Linux kernel aio so dbench with lots of 
 processes can proceed better in parallel (on the server)

From 413e661c136c52290de1ee19a1b049a4da9dbf51 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 28 Oct 2010 13:33:38 -0400
Subject: [PATCH 0102/1066] cifs: store pointer to master tlink in superblock
 (try #2)

This is the second version of this patch, the only difference between
it and the first one is that this explicitly makes cifs_sb_master_tlink
a static inline.

Instead of keeping a tag on the master tlink in the tree, just keep a
pointer to the master in the superblock. That eliminates the need for
using the radix tree to look up a tagged entry.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_fs_sb.h |  2 +-
 fs/cifs/connect.c    | 20 ++++----------------
 2 files changed, 5 insertions(+), 17 deletions(-)

diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h
index 525ba59a4105..79576dac336f 100644
--- a/fs/cifs/cifs_fs_sb.h
+++ b/fs/cifs/cifs_fs_sb.h
@@ -43,8 +43,8 @@
 
 struct cifs_sb_info {
 	struct radix_tree_root tlink_tree;
-#define CIFS_TLINK_MASTER_TAG		0	/* is "master" (mount) tcon */
 	spinlock_t tlink_tree_lock;
+	struct tcon_link *master_tlink;
 	struct nls_table *local_nls;
 	unsigned int rsize;
 	unsigned int wsize;
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 9eb327defa1d..197ac579a70b 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2914,11 +2914,11 @@ remote_path_check:
 
 	spin_lock(&cifs_sb->tlink_tree_lock);
 	radix_tree_insert(&cifs_sb->tlink_tree, pSesInfo->linux_uid, tlink);
-	radix_tree_tag_set(&cifs_sb->tlink_tree, pSesInfo->linux_uid,
-			   CIFS_TLINK_MASTER_TAG);
 	spin_unlock(&cifs_sb->tlink_tree_lock);
 	radix_tree_preload_end();
 
+	cifs_sb->master_tlink = tlink;
+
 	queue_delayed_work(system_nrt_wq, &cifs_sb->prune_tlinks,
 				TLINK_IDLE_EXPIRE);
 
@@ -3271,22 +3271,10 @@ out:
 	return tcon;
 }
 
-static struct tcon_link *
+static inline struct tcon_link *
 cifs_sb_master_tlink(struct cifs_sb_info *cifs_sb)
 {
-	struct tcon_link *tlink;
-	unsigned int ret;
-
-	spin_lock(&cifs_sb->tlink_tree_lock);
-	ret = radix_tree_gang_lookup_tag(&cifs_sb->tlink_tree, (void **)&tlink,
-					0, 1, CIFS_TLINK_MASTER_TAG);
-	spin_unlock(&cifs_sb->tlink_tree_lock);
-
-	/* the master tcon should always be present */
-	if (ret == 0)
-		BUG();
-
-	return tlink;
+	return cifs_sb->master_tlink;
 }
 
 struct cifsTconInfo *

From b647c35f77af9c07d336247b23014596e9f0a593 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 28 Oct 2010 11:16:44 -0400
Subject: [PATCH 0103/1066] cifs: convert tlink_tree to a rbtree

Radix trees are ideal when you want to track a bunch of pointers and
can't embed a tracking structure within the target of those pointers.
The tradeoff is an increase in memory, particularly if the tree is
sparse.

In CIFS, we use the tlink_tree to track tcon_link structs. A tcon_link
can never be in more than one tlink_tree, so there's no impediment to
using a rb_tree here instead of a radix tree.

Convert the new multiuser mount code to use a rb_tree instead. This
should reduce the memory required to manage the tlink_tree.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_fs_sb.h |   4 +-
 fs/cifs/cifsfs.c     |   2 +-
 fs/cifs/cifsglob.h   |   3 +-
 fs/cifs/connect.c    | 179 +++++++++++++++++++++++--------------------
 4 files changed, 102 insertions(+), 86 deletions(-)

diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h
index 79576dac336f..e9a393c9c2ca 100644
--- a/fs/cifs/cifs_fs_sb.h
+++ b/fs/cifs/cifs_fs_sb.h
@@ -15,7 +15,7 @@
  *   the GNU Lesser General Public License for more details.
  *
  */
-#include <linux/radix-tree.h>
+#include <linux/rbtree.h>
 
 #ifndef _CIFS_FS_SB_H
 #define _CIFS_FS_SB_H
@@ -42,7 +42,7 @@
 #define CIFS_MOUNT_MULTIUSER	0x20000 /* multiuser mount */
 
 struct cifs_sb_info {
-	struct radix_tree_root tlink_tree;
+	struct rb_root tlink_tree;
 	spinlock_t tlink_tree_lock;
 	struct tcon_link *master_tlink;
 	struct nls_table *local_nls;
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 75c4eaa79588..38526a6c4acf 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -116,7 +116,7 @@ cifs_read_super(struct super_block *sb, void *data,
 		return -ENOMEM;
 
 	spin_lock_init(&cifs_sb->tlink_tree_lock);
-	INIT_RADIX_TREE(&cifs_sb->tlink_tree, GFP_KERNEL);
+	cifs_sb->tlink_tree = RB_ROOT;
 
 	rc = bdi_setup_and_register(&cifs_sb->bdi, "cifs", BDI_CAP_MAP_COPY);
 	if (rc) {
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index f259e4d7612d..b577bf0a1bb3 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -336,7 +336,8 @@ struct cifsTconInfo {
  * "get" on the container.
  */
 struct tcon_link {
-	unsigned long		tl_index;
+	struct rb_node		tl_rbnode;
+	uid_t			tl_uid;
 	unsigned long		tl_flags;
 #define TCON_LINK_MASTER	0
 #define TCON_LINK_PENDING	1
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 197ac579a70b..c9699ce767b6 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -116,6 +116,7 @@ struct smb_vol {
 
 static int ipv4_connect(struct TCP_Server_Info *server);
 static int ipv6_connect(struct TCP_Server_Info *server);
+static void tlink_rb_insert(struct rb_root *root, struct tcon_link *new_tlink);
 static void cifs_prune_tlinks(struct work_struct *work);
 
 /*
@@ -2900,24 +2901,16 @@ remote_path_check:
 		goto mount_fail_check;
 	}
 
-	tlink->tl_index = pSesInfo->linux_uid;
+	tlink->tl_uid = pSesInfo->linux_uid;
 	tlink->tl_tcon = tcon;
 	tlink->tl_time = jiffies;
 	set_bit(TCON_LINK_MASTER, &tlink->tl_flags);
 	set_bit(TCON_LINK_IN_TREE, &tlink->tl_flags);
 
-	rc = radix_tree_preload(GFP_KERNEL);
-	if (rc == -ENOMEM) {
-		kfree(tlink);
-		goto mount_fail_check;
-	}
-
-	spin_lock(&cifs_sb->tlink_tree_lock);
-	radix_tree_insert(&cifs_sb->tlink_tree, pSesInfo->linux_uid, tlink);
-	spin_unlock(&cifs_sb->tlink_tree_lock);
-	radix_tree_preload_end();
-
 	cifs_sb->master_tlink = tlink;
+	spin_lock(&cifs_sb->tlink_tree_lock);
+	tlink_rb_insert(&cifs_sb->tlink_tree, tlink);
+	spin_unlock(&cifs_sb->tlink_tree_lock);
 
 	queue_delayed_work(system_nrt_wq, &cifs_sb->prune_tlinks,
 				TLINK_IDLE_EXPIRE);
@@ -3107,32 +3100,25 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 int
 cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb)
 {
-	int i, ret;
+	struct rb_root *root = &cifs_sb->tlink_tree;
+	struct rb_node *node;
+	struct tcon_link *tlink;
 	char *tmp;
-	struct tcon_link *tlink[8];
-	unsigned long index = 0;
 
 	cancel_delayed_work_sync(&cifs_sb->prune_tlinks);
 
-	do {
-		spin_lock(&cifs_sb->tlink_tree_lock);
-		ret = radix_tree_gang_lookup(&cifs_sb->tlink_tree,
-					     (void **)tlink, index,
-					     ARRAY_SIZE(tlink));
-		/* increment index for next pass */
-		if (ret > 0)
-			index = tlink[ret - 1]->tl_index + 1;
-		for (i = 0; i < ret; i++) {
-			cifs_get_tlink(tlink[i]);
-			clear_bit(TCON_LINK_IN_TREE, &tlink[i]->tl_flags);
-			radix_tree_delete(&cifs_sb->tlink_tree,
-							tlink[i]->tl_index);
-		}
-		spin_unlock(&cifs_sb->tlink_tree_lock);
+	spin_lock(&cifs_sb->tlink_tree_lock);
+	while ((node = rb_first(root))) {
+		tlink = rb_entry(node, struct tcon_link, tl_rbnode);
+		cifs_get_tlink(tlink);
+		clear_bit(TCON_LINK_IN_TREE, &tlink->tl_flags);
+		rb_erase(node, root);
 
-		for (i = 0; i < ret; i++)
-			cifs_put_tlink(tlink[i]);
-	} while (ret != 0);
+		spin_unlock(&cifs_sb->tlink_tree_lock);
+		cifs_put_tlink(tlink);
+		spin_lock(&cifs_sb->tlink_tree_lock);
+	}
+	spin_unlock(&cifs_sb->tlink_tree_lock);
 
 	tmp = cifs_sb->prepath;
 	cifs_sb->prepathlen = 0;
@@ -3290,6 +3276,47 @@ cifs_sb_tcon_pending_wait(void *unused)
 	return signal_pending(current) ? -ERESTARTSYS : 0;
 }
 
+/* find and return a tlink with given uid */
+static struct tcon_link *
+tlink_rb_search(struct rb_root *root, uid_t uid)
+{
+	struct rb_node *node = root->rb_node;
+	struct tcon_link *tlink;
+
+	while (node) {
+		tlink = rb_entry(node, struct tcon_link, tl_rbnode);
+
+		if (tlink->tl_uid > uid)
+			node = node->rb_left;
+		else if (tlink->tl_uid < uid)
+			node = node->rb_right;
+		else
+			return tlink;
+	}
+	return NULL;
+}
+
+/* insert a tcon_link into the tree */
+static void
+tlink_rb_insert(struct rb_root *root, struct tcon_link *new_tlink)
+{
+	struct rb_node **new = &(root->rb_node), *parent = NULL;
+	struct tcon_link *tlink;
+
+	while (*new) {
+		tlink = rb_entry(*new, struct tcon_link, tl_rbnode);
+		parent = *new;
+
+		if (tlink->tl_uid > new_tlink->tl_uid)
+			new = &((*new)->rb_left);
+		else
+			new = &((*new)->rb_right);
+	}
+
+	rb_link_node(&new_tlink->tl_rbnode, parent, new);
+	rb_insert_color(&new_tlink->tl_rbnode, root);
+}
+
 /*
  * Find or construct an appropriate tcon given a cifs_sb and the fsuid of the
  * current task.
@@ -3310,14 +3337,14 @@ struct tcon_link *
 cifs_sb_tlink(struct cifs_sb_info *cifs_sb)
 {
 	int ret;
-	unsigned long fsuid = (unsigned long) current_fsuid();
+	uid_t fsuid = current_fsuid();
 	struct tcon_link *tlink, *newtlink;
 
 	if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER))
 		return cifs_get_tlink(cifs_sb_master_tlink(cifs_sb));
 
 	spin_lock(&cifs_sb->tlink_tree_lock);
-	tlink = radix_tree_lookup(&cifs_sb->tlink_tree, fsuid);
+	tlink = tlink_rb_search(&cifs_sb->tlink_tree, fsuid);
 	if (tlink)
 		cifs_get_tlink(tlink);
 	spin_unlock(&cifs_sb->tlink_tree_lock);
@@ -3326,36 +3353,24 @@ cifs_sb_tlink(struct cifs_sb_info *cifs_sb)
 		newtlink = kzalloc(sizeof(*tlink), GFP_KERNEL);
 		if (newtlink == NULL)
 			return ERR_PTR(-ENOMEM);
-		newtlink->tl_index = fsuid;
+		newtlink->tl_uid = fsuid;
 		newtlink->tl_tcon = ERR_PTR(-EACCES);
 		set_bit(TCON_LINK_PENDING, &newtlink->tl_flags);
 		set_bit(TCON_LINK_IN_TREE, &newtlink->tl_flags);
 		cifs_get_tlink(newtlink);
 
-		ret = radix_tree_preload(GFP_KERNEL);
-		if (ret != 0) {
-			kfree(newtlink);
-			return ERR_PTR(ret);
-		}
-
 		spin_lock(&cifs_sb->tlink_tree_lock);
 		/* was one inserted after previous search? */
-		tlink = radix_tree_lookup(&cifs_sb->tlink_tree, fsuid);
+		tlink = tlink_rb_search(&cifs_sb->tlink_tree, fsuid);
 		if (tlink) {
 			cifs_get_tlink(tlink);
 			spin_unlock(&cifs_sb->tlink_tree_lock);
-			radix_tree_preload_end();
 			kfree(newtlink);
 			goto wait_for_construction;
 		}
-		ret = radix_tree_insert(&cifs_sb->tlink_tree, fsuid, newtlink);
-		spin_unlock(&cifs_sb->tlink_tree_lock);
-		radix_tree_preload_end();
-		if (ret) {
-			kfree(newtlink);
-			return ERR_PTR(ret);
-		}
 		tlink = newtlink;
+		tlink_rb_insert(&cifs_sb->tlink_tree, tlink);
+		spin_unlock(&cifs_sb->tlink_tree_lock);
 	} else {
 wait_for_construction:
 		ret = wait_on_bit(&tlink->tl_flags, TCON_LINK_PENDING,
@@ -3401,39 +3416,39 @@ cifs_prune_tlinks(struct work_struct *work)
 {
 	struct cifs_sb_info *cifs_sb = container_of(work, struct cifs_sb_info,
 						    prune_tlinks.work);
-	struct tcon_link *tlink[8];
-	unsigned long now = jiffies;
-	unsigned long index = 0;
-	int i, ret;
+	struct rb_root *root = &cifs_sb->tlink_tree;
+	struct rb_node *node = rb_first(root);
+	struct rb_node *tmp;
+	struct tcon_link *tlink;
+
+	/*
+	 * Because we drop the spinlock in the loop in order to put the tlink
+	 * it's not guarded against removal of links from the tree. The only
+	 * places that remove entries from the tree are this function and
+	 * umounts. Because this function is non-reentrant and is canceled
+	 * before umount can proceed, this is safe.
+	 */
+	spin_lock(&cifs_sb->tlink_tree_lock);
+	node = rb_first(root);
+	while (node != NULL) {
+		tmp = node;
+		node = rb_next(tmp);
+		tlink = rb_entry(tmp, struct tcon_link, tl_rbnode);
+
+		if (test_bit(TCON_LINK_MASTER, &tlink->tl_flags) ||
+		    atomic_read(&tlink->tl_count) != 0 ||
+		    time_after(tlink->tl_time + TLINK_IDLE_EXPIRE, jiffies))
+			continue;
+
+		cifs_get_tlink(tlink);
+		clear_bit(TCON_LINK_IN_TREE, &tlink->tl_flags);
+		rb_erase(tmp, root);
 
-	do {
-		spin_lock(&cifs_sb->tlink_tree_lock);
-		ret = radix_tree_gang_lookup(&cifs_sb->tlink_tree,
-					     (void **)tlink, index,
-					     ARRAY_SIZE(tlink));
-		/* increment index for next pass */
-		if (ret > 0)
-			index = tlink[ret - 1]->tl_index + 1;
-		for (i = 0; i < ret; i++) {
-			if (test_bit(TCON_LINK_MASTER, &tlink[i]->tl_flags) ||
-			    atomic_read(&tlink[i]->tl_count) != 0 ||
-			    time_after(tlink[i]->tl_time + TLINK_IDLE_EXPIRE,
-				       now)) {
-				tlink[i] = NULL;
-				continue;
-			}
-			cifs_get_tlink(tlink[i]);
-			clear_bit(TCON_LINK_IN_TREE, &tlink[i]->tl_flags);
-			radix_tree_delete(&cifs_sb->tlink_tree,
-					  tlink[i]->tl_index);
-		}
 		spin_unlock(&cifs_sb->tlink_tree_lock);
-
-		for (i = 0; i < ret; i++) {
-			if (tlink[i] != NULL)
-				cifs_put_tlink(tlink[i]);
-		}
-	} while (ret != 0);
+		cifs_put_tlink(tlink);
+		spin_lock(&cifs_sb->tlink_tree_lock);
+	}
+	spin_unlock(&cifs_sb->tlink_tree_lock);
 
 	queue_delayed_work(system_nrt_wq, &cifs_sb->prune_tlinks,
 				TLINK_IDLE_EXPIRE);

From 54eeafe1e4fb7b11da17adacacb1fbe279e0cf6e Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Tue, 2 Nov 2010 19:22:45 +0000
Subject: [PATCH 0104/1066] [CIFS] Cleanup unused variable build warning

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/file.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index a566f155df49..71185d1d310a 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -264,7 +264,6 @@ void cifsFileInfo_put(struct cifsFileInfo *cifs_file)
 	struct inode *inode = cifs_file->dentry->d_inode;
 	struct cifsTconInfo *tcon = tlink_tcon(cifs_file->tlink);
 	struct cifsInodeInfo *cifsi = CIFS_I(inode);
-	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
 	struct cifsLockInfo *li, *tmp;
 
 	spin_lock(&cifs_file_list_lock);

From 21b75b019983dfa5c2dda588f4b60b4ca69844a4 Mon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <bfields@redhat.com>
Date: Tue, 26 Oct 2010 10:07:17 -0400
Subject: [PATCH 0105/1066] nfsd4: fix 4.1 connection registration race

If a connection is closed just after a sequence or create_session
is sent over it, we could end up trying to register a callback that will
never get called since the xprt is already marked dead.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
---
 fs/nfsd/nfs4state.c             | 16 ++++++++++++----
 include/linux/sunrpc/svc_xprt.h | 24 +++++++++++++++++-------
 2 files changed, 29 insertions(+), 11 deletions(-)

diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index f1e5ec6b5105..ad2bfa68d534 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -673,16 +673,17 @@ static void nfsd4_hash_conn(struct nfsd4_conn *conn, struct nfsd4_session *ses)
 	spin_unlock(&clp->cl_lock);
 }
 
-static void nfsd4_register_conn(struct nfsd4_conn *conn)
+static int nfsd4_register_conn(struct nfsd4_conn *conn)
 {
 	conn->cn_xpt_user.callback = nfsd4_conn_lost;
-	register_xpt_user(conn->cn_xprt, &conn->cn_xpt_user);
+	return register_xpt_user(conn->cn_xprt, &conn->cn_xpt_user);
 }
 
 static __be32 nfsd4_new_conn(struct svc_rqst *rqstp, struct nfsd4_session *ses)
 {
 	struct nfsd4_conn *conn;
 	u32 flags = NFS4_CDFC4_FORE;
+	int ret;
 
 	if (ses->se_flags & SESSION4_BACK_CHAN)
 		flags |= NFS4_CDFC4_BACK;
@@ -690,7 +691,10 @@ static __be32 nfsd4_new_conn(struct svc_rqst *rqstp, struct nfsd4_session *ses)
 	if (!conn)
 		return nfserr_jukebox;
 	nfsd4_hash_conn(conn, ses);
-	nfsd4_register_conn(conn);
+	ret = nfsd4_register_conn(conn);
+	if (ret)
+		/* oops; xprt is already down: */
+		nfsd4_conn_lost(&conn->cn_xpt_user);
 	return nfs_ok;
 }
 
@@ -1644,6 +1648,7 @@ static void nfsd4_sequence_check_conn(struct nfsd4_conn *new, struct nfsd4_sessi
 {
 	struct nfs4_client *clp = ses->se_client;
 	struct nfsd4_conn *c;
+	int ret;
 
 	spin_lock(&clp->cl_lock);
 	c = __nfsd4_find_conn(new->cn_xprt, ses);
@@ -1654,7 +1659,10 @@ static void nfsd4_sequence_check_conn(struct nfsd4_conn *new, struct nfsd4_sessi
 	}
 	__nfsd4_hash_conn(new, ses);
 	spin_unlock(&clp->cl_lock);
-	nfsd4_register_conn(new);
+	ret = nfsd4_register_conn(new);
+	if (ret)
+		/* oops; xprt is already down: */
+		nfsd4_conn_lost(&new->cn_xpt_user);
 	return;
 }
 
diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h
index bbdb680ffbe9..aea0d438e3c7 100644
--- a/include/linux/sunrpc/svc_xprt.h
+++ b/include/linux/sunrpc/svc_xprt.h
@@ -82,13 +82,6 @@ struct svc_xprt {
 	struct net		*xpt_net;
 };
 
-static inline void register_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
-{
-	spin_lock(&xpt->xpt_lock);
-	list_add(&u->list, &xpt->xpt_users);
-	spin_unlock(&xpt->xpt_lock);
-}
-
 static inline void unregister_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
 {
 	spin_lock(&xpt->xpt_lock);
@@ -96,6 +89,23 @@ static inline void unregister_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user
 	spin_unlock(&xpt->xpt_lock);
 }
 
+static inline int register_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
+{
+	spin_lock(&xpt->xpt_lock);
+	if (test_bit(XPT_CLOSE, &xpt->xpt_flags)) {
+		/*
+		 * The connection is about to be deleted soon (or,
+		 * worse, may already be deleted--in which case we've
+		 * already notified the xpt_users).
+		 */
+		spin_unlock(&xpt->xpt_lock);
+		return -ENOTCONN;
+	}
+	list_add(&u->list, &xpt->xpt_users);
+	spin_unlock(&xpt->xpt_lock);
+	return 0;
+}
+
 int	svc_reg_xprt_class(struct svc_xprt_class *);
 void	svc_unreg_xprt_class(struct svc_xprt_class *);
 void	svc_xprt_init(struct svc_xprt_class *, struct svc_xprt *,

From 79c1a903ecddc52a7ecbac1e8e73f360ac6d0472 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Tue, 2 Nov 2010 17:44:22 +1000
Subject: [PATCH 0106/1066] m68knommu: add back in declaration of do_IRQ

The cleanup and merge of machdep should not have removed the do_IRQ
declaration. It is needed by the 68328 based targets.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/machdep.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
index 789f3b2de0e9..415d5484916c 100644
--- a/arch/m68k/include/asm/machdep.h
+++ b/arch/m68k/include/asm/machdep.h
@@ -40,5 +40,6 @@ extern unsigned long hw_timer_offset(void);
 extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
 
 extern void config_BSP(char *command, int len);
+extern void do_IRQ(int irq, struct pt_regs *fp);
 
 #endif /* _M68K_MACHDEP_H */

From ed35f654e4f0e08d39036353cc1dfda52a5cf129 Mon Sep 17 00:00:00 2001
From: Philippe De Muyter <phdm@macqel.be>
Date: Thu, 28 Oct 2010 14:42:58 +0200
Subject: [PATCH 0107/1066] m68k, m68knommu: Do not include linux/hardirq.h in
 asm/irqflags.h
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Recent changes to header files made kernel compilation for m68k/m68knommu
fail with :
  CC      arch/m68knommu/kernel/asm-offsets.s
In file included from /archives/linux/git/arch/m68k/include/asm/system.h:2,
                 from include/linux/wait.h:25,
                 from include/linux/mmzone.h:9,
                 from include/linux/gfp.h:4,
                 from include/linux/irq.h:20,
                 from include/asm-generic/hardirq.h:12,
                 from /archives/linux/git/arch/m68k/include/asm/hardirq_no.h:17,
                 from /archives/linux/git/arch/m68k/include/asm/hardirq.h:2,
                 from include/linux/hardirq.h:10,
                 from /archives/linux/git/arch/m68k/include/asm/irqflags.h:5,
                 from include/linux/irqflags.h:15,
                 from include/linux/spinlock.h:53,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:8,
                 from include/linux/timex.h:56,
                 from include/linux/sched.h:56,
                 from arch/m68knommu/kernel/asm-offsets.c:12:
/archives/linux/git/arch/m68k/include/asm/system_no.h: In function ‘__xchg’:
/archives/linux/git/arch/m68k/include/asm/system_no.h:79: error: implicit
+declaration of function ‘local_irq_save’
/archives/linux/git/arch/m68k/include/asm/system_no.h:101: error: implicit
+declaration of function ‘local_irq_restore’

Fix that

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/irqflags.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/m68k/include/asm/irqflags.h b/arch/m68k/include/asm/irqflags.h
index 4a5b284a1550..7ef4115b8c4a 100644
--- a/arch/m68k/include/asm/irqflags.h
+++ b/arch/m68k/include/asm/irqflags.h
@@ -2,7 +2,9 @@
 #define _M68K_IRQFLAGS_H
 
 #include <linux/types.h>
+#ifdef CONFIG_MMU
 #include <linux/hardirq.h>
+#endif
 #include <linux/preempt.h>
 #include <asm/thread_info.h>
 #include <asm/entry.h>

From 1a8b7a67224eb0c9dbd883b9bfc4938278bad370 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segooon@gmail.com>
Date: Wed, 3 Nov 2010 08:44:12 +0100
Subject: [PATCH 0108/1066] ipv4: netfilter: arp_tables: fix information leak
 to userland

Structure arpt_getinfo is copied to userland with the field "name"
that has the last elements unitialized.  It leads to leaking of
contents of kernel stack memory.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
---
 net/ipv4/netfilter/arp_tables.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index 3cad2591ace0..3fac340a28d5 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -927,6 +927,7 @@ static int get_info(struct net *net, void __user *user,
 			private = &tmp;
 		}
 #endif
+		memset(&info, 0, sizeof(info));
 		info.valid_hooks = t->valid_hooks;
 		memcpy(info.hook_entry, private->hook_entry,
 		       sizeof(info.hook_entry));

From b5f15ac4f89f84853544c934fc7a744289e95e34 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segooon@gmail.com>
Date: Wed, 3 Nov 2010 08:45:06 +0100
Subject: [PATCH 0109/1066] ipv4: netfilter: ip_tables: fix information leak to
 userland

Structure ipt_getinfo is copied to userland with the field "name"
that has the last elements unitialized.  It leads to leaking of
contents of kernel stack memory.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
---
 net/ipv4/netfilter/ip_tables.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index d31b007a6d80..a846d633b3b6 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -1124,6 +1124,7 @@ static int get_info(struct net *net, void __user *user,
 			private = &tmp;
 		}
 #endif
+		memset(&info, 0, sizeof(info));
 		info.valid_hooks = t->valid_hooks;
 		memcpy(info.hook_entry, private->hook_entry,
 		       sizeof(info.hook_entry));

From c46e0079cec40b49fbdb86a088cfd50b250fef47 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 3 Nov 2010 15:04:45 +0800
Subject: [PATCH 0110/1066] ASoC: Fix snd_soc_register_dais error handling

kzalloc for dai may fail at any iteration of the for loop,
thus properly unregister already registered DAIs before return error.

The error handling code in snd_soc_register_dais() already ensure all the DAIs
are unregistered before return error, we can remove the error handling code
to unregister DAIs in snd_soc_register_codec().

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/soc-core.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 614a8b30d87b..441285ade024 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -3043,8 +3043,10 @@ int snd_soc_register_dais(struct device *dev,
 	for (i = 0; i < count; i++) {
 
 		dai = kzalloc(sizeof(struct snd_soc_dai), GFP_KERNEL);
-		if (dai == NULL)
-			return -ENOMEM;
+		if (dai == NULL) {
+			ret = -ENOMEM;
+			goto err;
+		}
 
 		/* create DAI component name */
 		dai->name = fmt_multiple_name(dev, &dai_drv[i]);
@@ -3263,9 +3265,6 @@ int snd_soc_register_codec(struct device *dev,
 	return 0;
 
 error:
-	for (i--; i >= 0; i--)
-		snd_soc_unregister_dai(dev);
-
 	if (codec->reg_cache)
 		kfree(codec->reg_cache);
 	kfree(codec->name);

From 73bb2f250db841e54db3278517e09831014a62ac Mon Sep 17 00:00:00 2001
From: Vipin Mehta <vmehta@atheros.com>
Date: Fri, 17 Sep 2010 18:45:38 -0700
Subject: [PATCH 0111/1066] staging: ath6kl: Fixing the driver to use modified
 mmc_host structure

A recent change in the mmc_host structure removed the distinction
between hw and phys segments (58cb50c20fde6059f3f8db4466a1bd4d1fff999c)
Changing the driver to use the modified structure.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/ath6kl/hif/sdio/linux_sdio/src/hif_scatter.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/ath6kl/hif/sdio/linux_sdio/src/hif_scatter.c b/drivers/staging/ath6kl/hif/sdio/linux_sdio/src/hif_scatter.c
index 22c6c6659f5b..ee8b47746a15 100644
--- a/drivers/staging/ath6kl/hif/sdio/linux_sdio/src/hif_scatter.c
+++ b/drivers/staging/ath6kl/hif/sdio/linux_sdio/src/hif_scatter.c
@@ -285,9 +285,9 @@ A_STATUS SetupHIFScatterSupport(HIF_DEVICE *device, HIF_DEVICE_SCATTER_SUPPORT_I
     do {
         
             /* check if host supports scatter requests and it meets our requirements */
-        if (device->func->card->host->max_hw_segs < MAX_SCATTER_ENTRIES_PER_REQ) {
+        if (device->func->card->host->max_segs < MAX_SCATTER_ENTRIES_PER_REQ) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("HIF-SCATTER : host only supports scatter of : %d entries, need: %d \n",
-                    device->func->card->host->max_hw_segs, MAX_SCATTER_ENTRIES_PER_REQ));
+                    device->func->card->host->max_segs, MAX_SCATTER_ENTRIES_PER_REQ));
             status = A_ENOTSUP;
             break;    
         }

From 233538501f707b0176f09af7039fec1e3fcac6e7 Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Tue, 2 Nov 2010 15:50:32 +0100
Subject: [PATCH 0112/1066] ASoC: OMAP: fix OMAP1 compilation problem

In the new code introduced with commit cf4c87abe238ec17cd0255b4e21abd949d7f811e,
"OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c",
the way omap1 build is supposed to bypass omap2 specific functionality doesn't
optimize out all omap2 specific stuff. This breaks linking phase for omap1
machines, giving "undefined reference to `omap2_mcbsp1_mux_clkr_src'"
and "undefined reference to `omap2_mcbsp1_mux_fsr_src'" errors. Fix it.

Created and tested against linux-2.6.37-rc1.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 sound/soc/omap/omap-mcbsp.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index d211c9fa5a91..7e84f24b9a88 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -644,15 +644,23 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
 
 
 	case OMAP_MCBSP_CLKR_SRC_CLKR:
+		if (cpu_class_is_omap1())
+			break;
 		omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKR);
 		break;
 	case OMAP_MCBSP_CLKR_SRC_CLKX:
+		if (cpu_class_is_omap1())
+			break;
 		omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKX);
 		break;
 	case OMAP_MCBSP_FSR_SRC_FSR:
+		if (cpu_class_is_omap1())
+			break;
 		omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSR);
 		break;
 	case OMAP_MCBSP_FSR_SRC_FSX:
+		if (cpu_class_is_omap1())
+			break;
 		omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSX);
 		break;
 	default:

From 3073f0fa2b50808f0a506370e494456d4aa73718 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Fri, 29 Oct 2010 11:32:56 +0800
Subject: [PATCH 0113/1066] ARM: mmp: fix cpuid detection on mmp2

Fix typo error on cpu_is_mmp2(). Correct cpu_readid_id() to
read_cpuid_id().  Append missing parenthesis.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-mmp/include/mach/cputype.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
index f43a68b213f1..8a3b56dfd35d 100644
--- a/arch/arm/mach-mmp/include/mach/cputype.h
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -46,7 +46,8 @@ static inline int cpu_is_pxa910(void)
 #ifdef CONFIG_CPU_MMP2
 static inline int cpu_is_mmp2(void)
 {
-	return (((cpu_readid_id() >> 8) & 0xff) == 0x58);
+	return (((read_cpuid_id() >> 8) & 0xff) == 0x58);
+}
 #else
 #define cpu_is_mmp2()	(0)
 #endif

From 12cdcc8523f15051a5a4001de906bcf61acf6c36 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.y.miao@gmail.com>
Date: Tue, 2 Nov 2010 04:53:59 +0800
Subject: [PATCH 0114/1066] ARM: pxa: fix the missing definition of
 IRQ_BOARD_END

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Mike Rapoport <mike@compulab.co.il>
---
 arch/arm/include/asm/hardware/it8152.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
index 6700c7fc7ebd..21fa272301f8 100644
--- a/arch/arm/include/asm/hardware/it8152.h
+++ b/arch/arm/include/asm/hardware/it8152.h
@@ -75,7 +75,7 @@ extern unsigned long it8152_base_address;
   IT8152_PD_IRQ(1)  USB (USBR)
   IT8152_PD_IRQ(0)  Audio controller (ACR)
  */
-#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
+#define IT8152_IRQ(x)   (IRQ_BOARD_START + (x))
 
 /* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
 #define IT8152_LD_IRQ_COUNT     9

From 51e930ae44cb905ba1616add2e3c7f33f0bbbc0e Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Sun, 26 Sep 2010 14:37:49 +0200
Subject: [PATCH 0115/1066] ARM: pxa/cm-x2xx: remove duplicate call to
 pxa27x_init_irq

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/cm-x2xx.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index ac5598ce9724..d34b99febeb9 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -476,8 +476,6 @@ static void __init cmx2xx_init(void)
 
 static void __init cmx2xx_init_irq(void)
 {
-	pxa27x_init_irq();
-
 	if (cpu_is_pxa25x()) {
 		pxa25x_init_irq();
 		cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);

From 72feb6e7cb55e7947653446e52e54d66134ac1b5 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.y.miao@gmail.com>
Date: Tue, 2 Nov 2010 21:17:46 +0800
Subject: [PATCH 0116/1066] ARM: pxa/saar: fix the building failure caused by
 typo

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 arch/arm/mach-pxa/saar.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 4b521e045d75..ffa50e633ee6 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -116,7 +116,7 @@ static struct platform_device smc91x_device = {
 	},
 };
 
-#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULE)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static uint16_t lcd_power_on[] = {
 	/* single frame */
 	SMART_CMD_NOOP,

From ce7e010aef63dc6b37a2354f7c9f5f4aedb37978 Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Wed, 3 Nov 2010 12:03:21 -0400
Subject: [PATCH 0117/1066] ext4: initialize the percpu counters before
 replaying the journal

We now initialize the percpu counters before replaying the journal,
but after the journal, we recalculate the global counters, to deal
with the possibility of the per-blockgroup counts getting updated by
the journal replay.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/super.c | 65 +++++++++++++++++++++++++++++--------------------
 1 file changed, 39 insertions(+), 26 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 4d7ef31eacb1..04352e9729d0 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3347,6 +3347,24 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	get_random_bytes(&sbi->s_next_generation, sizeof(u32));
 	spin_lock_init(&sbi->s_next_gen_lock);
 
+	err = percpu_counter_init(&sbi->s_freeblocks_counter,
+			ext4_count_free_blocks(sb));
+	if (!err) {
+		err = percpu_counter_init(&sbi->s_freeinodes_counter,
+				ext4_count_free_inodes(sb));
+	}
+	if (!err) {
+		err = percpu_counter_init(&sbi->s_dirs_counter,
+				ext4_count_dirs(sb));
+	}
+	if (!err) {
+		err = percpu_counter_init(&sbi->s_dirtyblocks_counter, 0);
+	}
+	if (err) {
+		ext4_msg(sb, KERN_ERR, "insufficient memory");
+		goto failed_mount3;
+	}
+
 	sbi->s_stripe = ext4_get_stripe_size(sbi);
 	sbi->s_max_writeback_mb_bump = 128;
 
@@ -3445,22 +3463,19 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	}
 	set_task_ioprio(sbi->s_journal->j_task, journal_ioprio);
 
-no_journal:
-	err = percpu_counter_init(&sbi->s_freeblocks_counter,
-				  ext4_count_free_blocks(sb));
-	if (!err)
-		err = percpu_counter_init(&sbi->s_freeinodes_counter,
-					  ext4_count_free_inodes(sb));
-	if (!err)
-		err = percpu_counter_init(&sbi->s_dirs_counter,
-					  ext4_count_dirs(sb));
-	if (!err)
-		err = percpu_counter_init(&sbi->s_dirtyblocks_counter, 0);
-	if (err) {
-		ext4_msg(sb, KERN_ERR, "insufficient memory");
-		goto failed_mount_wq;
-	}
+	/*
+	 * The journal may have updated the bg summary counts, so we
+	 * need to update the global counters.
+	 */
+	percpu_counter_set(&sbi->s_freeblocks_counter,
+			   ext4_count_free_blocks(sb));
+	percpu_counter_set(&sbi->s_freeinodes_counter,
+			   ext4_count_free_inodes(sb));
+	percpu_counter_set(&sbi->s_dirs_counter,
+			   ext4_count_dirs(sb));
+	percpu_counter_set(&sbi->s_dirtyblocks_counter, 0);
 
+no_journal:
 	EXT4_SB(sb)->dio_unwritten_wq = create_workqueue("ext4-dio-unwritten");
 	if (!EXT4_SB(sb)->dio_unwritten_wq) {
 		printk(KERN_ERR "EXT4-fs: failed to create DIO workqueue\n");
@@ -3610,10 +3625,6 @@ failed_mount_wq:
 		jbd2_journal_destroy(sbi->s_journal);
 		sbi->s_journal = NULL;
 	}
-	percpu_counter_destroy(&sbi->s_freeblocks_counter);
-	percpu_counter_destroy(&sbi->s_freeinodes_counter);
-	percpu_counter_destroy(&sbi->s_dirs_counter);
-	percpu_counter_destroy(&sbi->s_dirtyblocks_counter);
 failed_mount3:
 	if (sbi->s_flex_groups) {
 		if (is_vmalloc_addr(sbi->s_flex_groups))
@@ -3621,6 +3632,10 @@ failed_mount3:
 		else
 			kfree(sbi->s_flex_groups);
 	}
+	percpu_counter_destroy(&sbi->s_freeblocks_counter);
+	percpu_counter_destroy(&sbi->s_freeinodes_counter);
+	percpu_counter_destroy(&sbi->s_dirs_counter);
+	percpu_counter_destroy(&sbi->s_dirtyblocks_counter);
 failed_mount2:
 	for (i = 0; i < db_count; i++)
 		brelse(sbi->s_group_desc[i]);
@@ -3948,13 +3963,11 @@ static int ext4_commit_super(struct super_block *sb, int sync)
 	else
 		es->s_kbytes_written =
 			cpu_to_le64(EXT4_SB(sb)->s_kbytes_written);
-	if (percpu_counter_initialized(&EXT4_SB(sb)->s_freeblocks_counter))
-		ext4_free_blocks_count_set(es, percpu_counter_sum_positive(
-					&EXT4_SB(sb)->s_freeblocks_counter));
-	if (percpu_counter_initialized(&EXT4_SB(sb)->s_freeinodes_counter))
-		es->s_free_inodes_count =
-			cpu_to_le32(percpu_counter_sum_positive(
-					&EXT4_SB(sb)->s_freeinodes_counter));
+	ext4_free_blocks_count_set(es, percpu_counter_sum_positive(
+					   &EXT4_SB(sb)->s_freeblocks_counter));
+	es->s_free_inodes_count =
+		cpu_to_le32(percpu_counter_sum_positive(
+				&EXT4_SB(sb)->s_freeinodes_counter));
 	sb->s_dirt = 0;
 	BUFFER_TRACE(sbh, "marking dirty");
 	mark_buffer_dirty(sbh);

From 74a557e27ff86a5a1f8d5f24c178c70b98367b12 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 3 Nov 2010 09:37:06 -0400
Subject: [PATCH 0118/1066] ASoC: Check return value of strict_strtoul() in
 WM8962

strict_strtoul() has been made __must_check so do so.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 sound/soc/codecs/wm8962.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 894d0cd3aa9b..e8092745a207 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -3500,8 +3500,11 @@ static ssize_t wm8962_beep_set(struct device *dev,
 {
 	struct wm8962_priv *wm8962 = dev_get_drvdata(dev);
 	long int time;
+	int ret;
 
-	strict_strtol(buf, 10, &time);
+	ret = strict_strtol(buf, 10, &time);
+	if (ret != 0)
+		return ret;
 
 	input_event(wm8962->beep, EV_SND, SND_TONE, time);
 

From 95716c0decb2ed3ff94998b6390cc8f8d6d1e748 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Tue, 2 Nov 2010 11:33:05 -0700
Subject: [PATCH 0119/1066] Input: adp5588-keys - unify common header defines

Unify adp5588-gpio and adp5588-keys common header defines (as per Andrew
Morton request). For consistency, move remaining defines and prefix
accordingly.

No functional changes.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/adp5588-keys.c | 74 +++++++++------------------
 include/linux/i2c/adp5588.h           | 15 +++++-
 2 files changed, 39 insertions(+), 50 deletions(-)

diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index b92d1cd5cba1..af45d275f686 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -4,7 +4,7 @@
  *		 I2C QWERTY Keypad and IO Expander
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2008-2009 Analog Devices Inc.
+ * Copyright (C) 2008-2010 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -24,29 +24,6 @@
 
 #include <linux/i2c/adp5588.h>
 
- /* Configuration Register1 */
-#define AUTO_INC	(1 << 7)
-#define GPIEM_CFG	(1 << 6)
-#define OVR_FLOW_M	(1 << 5)
-#define INT_CFG		(1 << 4)
-#define OVR_FLOW_IEN	(1 << 3)
-#define K_LCK_IM	(1 << 2)
-#define GPI_IEN		(1 << 1)
-#define KE_IEN		(1 << 0)
-
-/* Interrupt Status Register */
-#define CMP2_INT	(1 << 5)
-#define CMP1_INT	(1 << 4)
-#define OVR_FLOW_INT	(1 << 3)
-#define K_LCK_INT	(1 << 2)
-#define GPI_INT		(1 << 1)
-#define KE_INT		(1 << 0)
-
-/* Key Lock and Event Counter Register */
-#define K_LCK_EN	(1 << 6)
-#define LCK21		0x30
-#define KEC		0xF
-
 /* Key Event Register xy */
 #define KEY_EV_PRESSED		(1 << 7)
 #define KEY_EV_MASK		(0x7F)
@@ -55,10 +32,6 @@
 
 #define KEYP_MAX_EVENT		10
 
-#define MAXGPIO			18
-#define ADP_BANK(offs)		((offs) >> 3)
-#define ADP_BIT(offs)		(1u << ((offs) & 0x7))
-
 /*
  * Early pre 4.0 Silicon required to delay readout by at least 25ms,
  * since the Event Counter Register updated 25ms after the interrupt
@@ -75,7 +48,7 @@ struct adp5588_kpad {
 	const struct adp5588_gpi_map *gpimap;
 	unsigned short gpimapsize;
 #ifdef CONFIG_GPIOLIB
-	unsigned char gpiomap[MAXGPIO];
+	unsigned char gpiomap[ADP5588_MAXGPIO];
 	bool export_gpio;
 	struct gpio_chip gc;
 	struct mutex gpio_lock;	/* Protect cached dir, dat_out */
@@ -103,8 +76,8 @@ static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
 static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
 {
 	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
-	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
-	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
 
 	return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit);
 }
@@ -113,8 +86,8 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip,
 				   unsigned off, int val)
 {
 	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
-	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
-	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
 
 	mutex_lock(&kpad->gpio_lock);
 
@@ -132,8 +105,8 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip,
 static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
 {
 	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
-	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
-	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
 	int ret;
 
 	mutex_lock(&kpad->gpio_lock);
@@ -150,8 +123,8 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip,
 					 unsigned off, int val)
 {
 	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
-	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
-	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
 	int ret;
 
 	mutex_lock(&kpad->gpio_lock);
@@ -176,7 +149,7 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip,
 static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad,
 				const struct adp5588_kpad_platform_data *pdata)
 {
-	bool pin_used[MAXGPIO];
+	bool pin_used[ADP5588_MAXGPIO];
 	int n_unused = 0;
 	int i;
 
@@ -191,7 +164,7 @@ static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad,
 	for (i = 0; i < kpad->gpimapsize; i++)
 		pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true;
 
-	for (i = 0; i < MAXGPIO; i++)
+	for (i = 0; i < ADP5588_MAXGPIO; i++)
 		if (!pin_used[i])
 			kpad->gpiomap[n_unused++] = i;
 
@@ -234,7 +207,7 @@ static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad)
 		return error;
 	}
 
-	for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
+	for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
 		kpad->dat_out[i] = adp5588_read(kpad->client,
 						GPIO_DAT_OUT1 + i);
 		kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i);
@@ -318,11 +291,11 @@ static void adp5588_work(struct work_struct *work)
 
 	status = adp5588_read(client, INT_STAT);
 
-	if (status & OVR_FLOW_INT)	/* Unlikely and should never happen */
+	if (status & ADP5588_OVR_FLOW_INT)	/* Unlikely and should never happen */
 		dev_err(&client->dev, "Event Overflow Error\n");
 
-	if (status & KE_INT) {
-		ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC;
+	if (status & ADP5588_KE_INT) {
+		ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & ADP5588_KEC;
 		if (ev_cnt) {
 			adp5588_report_events(kpad, ev_cnt);
 			input_sync(kpad->input);
@@ -360,7 +333,7 @@ static int __devinit adp5588_setup(struct i2c_client *client)
 	if (pdata->en_keylock) {
 		ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1);
 		ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2);
-		ret |= adp5588_write(client, KEY_LCK_EC_STAT, K_LCK_EN);
+		ret |= adp5588_write(client, KEY_LCK_EC_STAT, ADP5588_K_LCK_EN);
 	}
 
 	for (i = 0; i < KEYP_MAX_EVENT; i++)
@@ -384,7 +357,7 @@ static int __devinit adp5588_setup(struct i2c_client *client)
 	}
 
 	if (gpio_data) {
-		for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
+		for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
 			int pull_mask = gpio_data->pullup_dis_mask;
 
 			ret |= adp5588_write(client, GPIO_PULL1 + i,
@@ -392,11 +365,14 @@ static int __devinit adp5588_setup(struct i2c_client *client)
 		}
 	}
 
-	ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT |
-					OVR_FLOW_INT | K_LCK_INT |
-					GPI_INT | KE_INT); /* Status is W1C */
+	ret |= adp5588_write(client, INT_STAT,
+				ADP5588_CMP2_INT | ADP5588_CMP1_INT |
+				ADP5588_OVR_FLOW_INT | ADP5588_K_LCK_INT |
+				ADP5588_GPI_INT | ADP5588_KE_INT); /* Status is W1C */
 
-	ret |= adp5588_write(client, CFG, INT_CFG | OVR_FLOW_IEN | KE_IEN);
+	ret |= adp5588_write(client, CFG, ADP5588_INT_CFG |
+					  ADP5588_OVR_FLOW_IEN |
+					  ADP5588_KE_IEN);
 
 	if (ret < 0) {
 		dev_err(&client->dev, "Write Error\n");
diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h
index 3c5d6b6e765c..cec17cf6cac2 100644
--- a/include/linux/i2c/adp5588.h
+++ b/include/linux/i2c/adp5588.h
@@ -1,7 +1,7 @@
 /*
  * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller
  *
- * Copyright 2009 Analog Devices Inc.
+ * Copyright 2009-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -77,13 +77,26 @@
  /* Configuration Register1 */
 #define ADP5588_AUTO_INC	(1 << 7)
 #define ADP5588_GPIEM_CFG	(1 << 6)
+#define ADP5588_OVR_FLOW_M	(1 << 5)
 #define ADP5588_INT_CFG		(1 << 4)
+#define ADP5588_OVR_FLOW_IEN	(1 << 3)
+#define ADP5588_K_LCK_IM	(1 << 2)
 #define ADP5588_GPI_IEN		(1 << 1)
+#define ADP5588_KE_IEN		(1 << 0)
 
 /* Interrupt Status Register */
+#define ADP5588_CMP2_INT	(1 << 5)
+#define ADP5588_CMP1_INT	(1 << 4)
+#define ADP5588_OVR_FLOW_INT	(1 << 3)
+#define ADP5588_K_LCK_INT	(1 << 2)
 #define ADP5588_GPI_INT		(1 << 1)
 #define ADP5588_KE_INT		(1 << 0)
 
+/* Key Lock and Event Counter Register */
+#define ADP5588_K_LCK_EN	(1 << 6)
+#define ADP5588_LCK21		0x30
+#define ADP5588_KEC		0xF
+
 #define ADP5588_MAXGPIO		18
 #define ADP5588_BANK(offs)	((offs) >> 3)
 #define ADP5588_BIT(offs)	(1u << ((offs) & 0x7))

From b50b521694cb7093640879d3279b88d2873f6183 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Wed, 3 Nov 2010 11:02:31 -0700
Subject: [PATCH 0120/1066] Input: export input_reset_device() for use in KGDB

KGDB, much like the resume process, needs to be able to mark all keys that
were pressed at the time we dropped into the debuggers as "released", since
it is unlikely that the keys stay pressed for the entire duration of the
debug session.

Also we need to make sure that input_reset_device() and input_dev_suspend()
only attempt to change state of currenlt opened devices since closed devices
may not be ready to accept IO requests.

Tested-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/input.c | 50 ++++++++++++++++++++++++++++++-------------
 include/linux/input.h |  4 +++-
 2 files changed, 38 insertions(+), 16 deletions(-)

diff --git a/drivers/input/input.c b/drivers/input/input.c
index d092ef9291da..75bed635b98d 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1565,8 +1565,7 @@ static int input_dev_uevent(struct device *device, struct kobj_uevent_env *env)
 		}							\
 	} while (0)
 
-#ifdef CONFIG_PM
-static void input_dev_reset(struct input_dev *dev, bool activate)
+static void input_dev_toggle(struct input_dev *dev, bool activate)
 {
 	if (!dev->event)
 		return;
@@ -1580,12 +1579,44 @@ static void input_dev_reset(struct input_dev *dev, bool activate)
 	}
 }
 
+/**
+ * input_reset_device() - reset/restore the state of input device
+ * @dev: input device whose state needs to be reset
+ *
+ * This function tries to reset the state of an opened input device and
+ * bring internal state and state if the hardware in sync with each other.
+ * We mark all keys as released, restore LED state, repeat rate, etc.
+ */
+void input_reset_device(struct input_dev *dev)
+{
+	mutex_lock(&dev->mutex);
+
+	if (dev->users) {
+		input_dev_toggle(dev, true);
+
+		/*
+		 * Keys that have been pressed at suspend time are unlikely
+		 * to be still pressed when we resume.
+		 */
+		spin_lock_irq(&dev->event_lock);
+		input_dev_release_keys(dev);
+		spin_unlock_irq(&dev->event_lock);
+	}
+
+	mutex_unlock(&dev->mutex);
+}
+EXPORT_SYMBOL(input_reset_device);
+
+#ifdef CONFIG_PM
 static int input_dev_suspend(struct device *dev)
 {
 	struct input_dev *input_dev = to_input_dev(dev);
 
 	mutex_lock(&input_dev->mutex);
-	input_dev_reset(input_dev, false);
+
+	if (input_dev->users)
+		input_dev_toggle(input_dev, false);
+
 	mutex_unlock(&input_dev->mutex);
 
 	return 0;
@@ -1595,18 +1626,7 @@ static int input_dev_resume(struct device *dev)
 {
 	struct input_dev *input_dev = to_input_dev(dev);
 
-	mutex_lock(&input_dev->mutex);
-	input_dev_reset(input_dev, true);
-
-	/*
-	 * Keys that have been pressed at suspend time are unlikely
-	 * to be still pressed when we resume.
-	 */
-	spin_lock_irq(&input_dev->event_lock);
-	input_dev_release_keys(input_dev);
-	spin_unlock_irq(&input_dev->event_lock);
-
-	mutex_unlock(&input_dev->mutex);
+	input_reset_device(input_dev);
 
 	return 0;
 }
diff --git a/include/linux/input.h b/include/linux/input.h
index 51af441f3a21..6ef44465db8d 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -1406,6 +1406,8 @@ static inline void input_set_drvdata(struct input_dev *dev, void *data)
 int __must_check input_register_device(struct input_dev *);
 void input_unregister_device(struct input_dev *);
 
+void input_reset_device(struct input_dev *);
+
 int __must_check input_register_handler(struct input_handler *);
 void input_unregister_handler(struct input_handler *);
 
@@ -1421,7 +1423,7 @@ void input_release_device(struct input_handle *);
 int input_open_device(struct input_handle *);
 void input_close_device(struct input_handle *);
 
-int input_flush_device(struct input_handle* handle, struct file* file);
+int input_flush_device(struct input_handle *handle, struct file *file);
 
 void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value);
 void input_inject_event(struct input_handle *handle, unsigned int type, unsigned int code, int value);

From 111c182340cd22e238ab1cc6564df336c6ebd7cb Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Wed, 3 Nov 2010 11:04:05 -0700
Subject: [PATCH 0121/1066] kgdboc: reset input devices (keyboards) when
 exiting debugger

Use the newly exported input_reset_device() call to reset LED state and
mark all keys/buttons as released on all keyboard-like devices when
exiting the debugger.

[jason.wessel@windriver.com: fix compile without keyboard input driver]
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/serial/kgdboc.c | 59 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/drivers/serial/kgdboc.c b/drivers/serial/kgdboc.c
index d4b711c9a416..3374618300af 100644
--- a/drivers/serial/kgdboc.c
+++ b/drivers/serial/kgdboc.c
@@ -18,6 +18,7 @@
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/vt_kern.h>
+#include <linux/input.h>
 
 #define MAX_CONFIG_LEN		40
 
@@ -37,6 +38,61 @@ static struct tty_driver	*kgdb_tty_driver;
 static int			kgdb_tty_line;
 
 #ifdef CONFIG_KDB_KEYBOARD
+static int kgdboc_reset_connect(struct input_handler *handler,
+				struct input_dev *dev,
+				const struct input_device_id *id)
+{
+	input_reset_device(dev);
+
+	/* Retrun an error - we do not want to bind, just to reset */
+	return -ENODEV;
+}
+
+static void kgdboc_reset_disconnect(struct input_handle *handle)
+{
+	/* We do not expect anyone to actually bind to us */
+	BUG();
+}
+
+static const struct input_device_id kgdboc_reset_ids[] = {
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+	},
+	{ }
+};
+
+static struct input_handler kgdboc_reset_handler = {
+	.connect	= kgdboc_reset_connect,
+	.disconnect	= kgdboc_reset_disconnect,
+	.name		= "kgdboc_reset",
+	.id_table	= kgdboc_reset_ids,
+};
+
+static DEFINE_MUTEX(kgdboc_reset_mutex);
+
+static void kgdboc_restore_input_helper(struct work_struct *dummy)
+{
+	/*
+	 * We need to take a mutex to prevent several instances of
+	 * this work running on different CPUs so they don't try
+	 * to register again already registered handler.
+	 */
+	mutex_lock(&kgdboc_reset_mutex);
+
+	if (input_register_handler(&kgdboc_reset_handler) == 0)
+		input_unregister_handler(&kgdboc_reset_handler);
+
+	mutex_unlock(&kgdboc_reset_mutex);
+}
+
+static DECLARE_WORK(kgdboc_restore_input_work, kgdboc_restore_input_helper);
+
+static void kgdboc_restore_input(void)
+{
+	schedule_work(&kgdboc_restore_input_work);
+}
+
 static int kgdboc_register_kbd(char **cptr)
 {
 	if (strncmp(*cptr, "kbd", 3) == 0) {
@@ -64,10 +120,12 @@ static void kgdboc_unregister_kbd(void)
 			i--;
 		}
 	}
+	flush_work_sync(&kgdboc_restore_input_work);
 }
 #else /* ! CONFIG_KDB_KEYBOARD */
 #define kgdboc_register_kbd(x) 0
 #define kgdboc_unregister_kbd()
+#define kgdboc_restore_input()
 #endif /* ! CONFIG_KDB_KEYBOARD */
 
 static int kgdboc_option_setup(char *opt)
@@ -231,6 +289,7 @@ static void kgdboc_post_exp_handler(void)
 		dbg_restore_graphics = 0;
 		con_debug_leave();
 	}
+	kgdboc_restore_input();
 }
 
 static struct kgdb_io kgdboc_io_ops = {

From 48fcfc888b48ad49dd83faa107264bbfb0089cad Mon Sep 17 00:00:00 2001
From: Kyle McMartin <kyle@redhat.com>
Date: Wed, 3 Nov 2010 16:27:57 -0400
Subject: [PATCH 0122/1066] i915: reprogram power monitoring registers on
 resume

Fixes issue where i915_gfx_val was reporting values several
orders of magnitude higher than physically possible (without
leaving scorch marks on my thighs at least.)

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_suspend.c | 4 +++-
 drivers/gpu/drm/i915/intel_drv.h    | 1 +
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 989c19d2d959..454c064f8ef7 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -862,8 +862,10 @@ int i915_restore_state(struct drm_device *dev)
 	/* Clock gating state */
 	intel_init_clock_gating(dev);
 
-	if (HAS_PCH_SPLIT(dev))
+	if (HAS_PCH_SPLIT(dev)) {
 		ironlake_enable_drps(dev);
+		intel_init_emon(dev);
+	}
 
 	/* Cache mode state */
 	I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 9af9f86a8765..21551fe74541 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -296,6 +296,7 @@ extern void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
 extern void intel_init_clock_gating(struct drm_device *dev);
 extern void ironlake_enable_drps(struct drm_device *dev);
 extern void ironlake_disable_drps(struct drm_device *dev);
+extern void intel_init_emon(struct drm_device *dev);
 
 extern int intel_pin_and_fence_fb_obj(struct drm_device *dev,
 				      struct drm_gem_object *obj,

From 6cc0e949afe757d240fba4ad1839a27f66c3bd72 Mon Sep 17 00:00:00 2001
From: John Faith <jfaith7@gmail.com>
Date: Mon, 1 Nov 2010 11:30:08 +0000
Subject: [PATCH 0123/1066] smsc911x: Set Ethernet EEPROM size to supported
 device's size

The SMSC911x supports 128 x 8-bit EEPROMs.  Increase the EEPROM size
so more than just the MAC address can be stored.

Signed-off-by: John Faith <jfaith7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/smsc911x.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/smsc911x.h b/drivers/net/smsc911x.h
index 016360c65ce2..8a7958569843 100644
--- a/drivers/net/smsc911x.h
+++ b/drivers/net/smsc911x.h
@@ -22,7 +22,7 @@
 #define __SMSC911X_H__
 
 #define TX_FIFO_LOW_THRESHOLD	((u32)1600)
-#define SMSC911X_EEPROM_SIZE	((u32)7)
+#define SMSC911X_EEPROM_SIZE	((u32)128)
 #define USE_DEBUG		0
 
 /* This is the maximum number of packets to be received every

From f2527ec436fd675f08a8e7434f6e940688cb96d0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Andr=C3=A9=20Carvalho=20de=20Matos?=
 <andre.carvalho.matos@stericsson.com>
Date: Mon, 1 Nov 2010 11:52:47 +0000
Subject: [PATCH 0124/1066] caif: Bugfix for socket priority, bindtodev and dbg
 channel.

Changes:
o Bugfix: SO_PRIORITY for SOL_SOCKET could not be handled
  in caif's setsockopt,  using the struct sock attribute priority instead.

o Bugfix: SO_BINDTODEVICE for SOL_SOCKET could not be handled
  in caif's setsockopt,  using the struct sock attribute ifindex instead.

o Wrong assert statement for RFM layer segmentation.

o CAIF Debug channels was not working over SPI, caif_payload_info
  containing padding info must be initialized.

o Check on pointer before dereferencing when unregister dev in caif_dev.c

Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/caif/caif_dev.h |  4 ++--
 include/net/caif/cfcnfg.h   |  8 +++----
 net/caif/caif_config_util.c | 15 +++++++++----
 net/caif/caif_dev.c         |  2 ++
 net/caif/caif_socket.c      | 45 +++++++++++++------------------------
 net/caif/cfcnfg.c           | 17 ++++++--------
 net/caif/cfdbgl.c           | 14 ++++++++++++
 net/caif/cfrfml.c           |  2 +-
 8 files changed, 56 insertions(+), 51 deletions(-)

diff --git a/include/net/caif/caif_dev.h b/include/net/caif/caif_dev.h
index 6da573c75d54..8eff83b95366 100644
--- a/include/net/caif/caif_dev.h
+++ b/include/net/caif/caif_dev.h
@@ -28,7 +28,7 @@ struct caif_param {
  * @sockaddr:		Socket address to connect.
  * @priority:		Priority of the connection.
  * @link_selector:	Link selector (high bandwidth or low latency)
- * @link_name:		Name of the CAIF Link Layer to use.
+ * @ifindex:		kernel index of the interface.
  * @param:		Connect Request parameters (CAIF_SO_REQ_PARAM).
  *
  * This struct is used when connecting a CAIF channel.
@@ -39,7 +39,7 @@ struct caif_connect_request {
 	struct sockaddr_caif sockaddr;
 	enum caif_channel_priority priority;
 	enum caif_link_selector link_selector;
-	char link_name[16];
+	int ifindex;
 	struct caif_param param;
 };
 
diff --git a/include/net/caif/cfcnfg.h b/include/net/caif/cfcnfg.h
index bd646faffa47..f688478bfb84 100644
--- a/include/net/caif/cfcnfg.h
+++ b/include/net/caif/cfcnfg.h
@@ -139,10 +139,10 @@ struct dev_info *cfcnfg_get_phyid(struct cfcnfg *cnfg,
 		     enum cfcnfg_phy_preference phy_pref);
 
 /**
- * cfcnfg_get_named() - Get the Physical Identifier of CAIF Link Layer
+ * cfcnfg_get_id_from_ifi() - Get the Physical Identifier of ifindex,
+ * 			it matches caif physical id with the kernel interface id.
  * @cnfg:	Configuration object
- * @name:	Name of the Physical Layer (Caif Link Layer)
+ * @ifi:	ifindex obtained from socket.c bindtodevice.
  */
-int cfcnfg_get_named(struct cfcnfg *cnfg, char *name);
-
+int cfcnfg_get_id_from_ifi(struct cfcnfg *cnfg, int ifi);
 #endif				/* CFCNFG_H_ */
diff --git a/net/caif/caif_config_util.c b/net/caif/caif_config_util.c
index 76ae68303d3a..d522d8c1703e 100644
--- a/net/caif/caif_config_util.c
+++ b/net/caif/caif_config_util.c
@@ -16,11 +16,18 @@ int connect_req_to_link_param(struct cfcnfg *cnfg,
 {
 	struct dev_info *dev_info;
 	enum cfcnfg_phy_preference pref;
-	memset(l, 0, sizeof(*l));
-	l->priority = s->priority;
+	int res;
 
-	if (s->link_name[0] != '\0')
-		l->phyid = cfcnfg_get_named(cnfg, s->link_name);
+	memset(l, 0, sizeof(*l));
+	/* In caif protocol low value is high priority */
+	l->priority = CAIF_PRIO_MAX - s->priority + 1;
+
+	if (s->ifindex != 0){
+		res = cfcnfg_get_id_from_ifi(cnfg, s->ifindex);
+		if (res < 0)
+			return res;
+		l->phyid = res;
+	}
 	else {
 		switch (s->link_selector) {
 		case CAIF_LINK_HIGH_BANDW:
diff --git a/net/caif/caif_dev.c b/net/caif/caif_dev.c
index b99369a055d1..a42a408306e4 100644
--- a/net/caif/caif_dev.c
+++ b/net/caif/caif_dev.c
@@ -307,6 +307,8 @@ static int caif_device_notify(struct notifier_block *me, unsigned long what,
 
 	case NETDEV_UNREGISTER:
 		caifd = caif_get(dev);
+		if (caifd == NULL)
+			break;
 		netdev_info(dev, "unregister\n");
 		atomic_set(&caifd->state, what);
 		caif_device_destroy(dev);
diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c
index 2eca2dd0000f..1bf0cf503796 100644
--- a/net/caif/caif_socket.c
+++ b/net/caif/caif_socket.c
@@ -716,8 +716,7 @@ static int setsockopt(struct socket *sock,
 {
 	struct sock *sk = sock->sk;
 	struct caifsock *cf_sk = container_of(sk, struct caifsock, sk);
-	int prio, linksel;
-	struct ifreq ifreq;
+	int linksel;
 
 	if (cf_sk->sk.sk_socket->state != SS_UNCONNECTED)
 		return -ENOPROTOOPT;
@@ -735,33 +734,6 @@ static int setsockopt(struct socket *sock,
 		release_sock(&cf_sk->sk);
 		return 0;
 
-	case SO_PRIORITY:
-		if (lvl != SOL_SOCKET)
-			goto bad_sol;
-		if (ol < sizeof(int))
-			return -EINVAL;
-		if (copy_from_user(&prio, ov, sizeof(int)))
-			return -EINVAL;
-		lock_sock(&(cf_sk->sk));
-		cf_sk->conn_req.priority = prio;
-		release_sock(&cf_sk->sk);
-		return 0;
-
-	case SO_BINDTODEVICE:
-		if (lvl != SOL_SOCKET)
-			goto bad_sol;
-		if (ol < sizeof(struct ifreq))
-			return -EINVAL;
-		if (copy_from_user(&ifreq, ov, sizeof(ifreq)))
-			return -EFAULT;
-		lock_sock(&(cf_sk->sk));
-		strncpy(cf_sk->conn_req.link_name, ifreq.ifr_name,
-			sizeof(cf_sk->conn_req.link_name));
-		cf_sk->conn_req.link_name
-			[sizeof(cf_sk->conn_req.link_name)-1] = 0;
-		release_sock(&cf_sk->sk);
-		return 0;
-
 	case CAIFSO_REQ_PARAM:
 		if (lvl != SOL_CAIF)
 			goto bad_sol;
@@ -880,6 +852,18 @@ static int caif_connect(struct socket *sock, struct sockaddr *uaddr,
 	sock->state = SS_CONNECTING;
 	sk->sk_state = CAIF_CONNECTING;
 
+	/* Check priority value comming from socket */
+	/* if priority value is out of range it will be ajusted */
+	if (cf_sk->sk.sk_priority > CAIF_PRIO_MAX)
+		cf_sk->conn_req.priority = CAIF_PRIO_MAX;
+	else if (cf_sk->sk.sk_priority < CAIF_PRIO_MIN)
+		cf_sk->conn_req.priority = CAIF_PRIO_MIN;
+	else
+		cf_sk->conn_req.priority = cf_sk->sk.sk_priority;
+
+	/*ifindex = id of the interface.*/
+	cf_sk->conn_req.ifindex = cf_sk->sk.sk_bound_dev_if;
+
 	dbfs_atomic_inc(&cnt.num_connect_req);
 	cf_sk->layer.receive = caif_sktrecv_cb;
 	err = caif_connect_client(&cf_sk->conn_req,
@@ -905,6 +889,7 @@ static int caif_connect(struct socket *sock, struct sockaddr *uaddr,
 	cf_sk->maxframe = mtu - (headroom + tailroom);
 	if (cf_sk->maxframe < 1) {
 		pr_warn("CAIF Interface MTU too small (%d)\n", dev->mtu);
+		err = -ENODEV;
 		goto out;
 	}
 
@@ -1142,7 +1127,7 @@ static int caif_create(struct net *net, struct socket *sock, int protocol,
 	set_rx_flow_on(cf_sk);
 
 	/* Set default options on configuration */
-	cf_sk->conn_req.priority = CAIF_PRIO_NORMAL;
+	cf_sk->sk.sk_priority= CAIF_PRIO_NORMAL;
 	cf_sk->conn_req.link_selector = CAIF_LINK_LOW_LATENCY;
 	cf_sk->conn_req.protocol = protocol;
 	/* Increase the number of sockets created. */
diff --git a/net/caif/cfcnfg.c b/net/caif/cfcnfg.c
index 41adafd18914..21ede141018a 100644
--- a/net/caif/cfcnfg.c
+++ b/net/caif/cfcnfg.c
@@ -173,18 +173,15 @@ static struct cfcnfg_phyinfo *cfcnfg_get_phyinfo(struct cfcnfg *cnfg,
 	return NULL;
 }
 
-int cfcnfg_get_named(struct cfcnfg *cnfg, char *name)
+
+int cfcnfg_get_id_from_ifi(struct cfcnfg *cnfg, int ifi)
 {
 	int i;
-
-	/* Try to match with specified name */
-	for (i = 0; i < MAX_PHY_LAYERS; i++) {
-		if (cnfg->phy_layers[i].frm_layer != NULL
-		    && strcmp(cnfg->phy_layers[i].phy_layer->name,
-			      name) == 0)
-			return cnfg->phy_layers[i].frm_layer->id;
-	}
-	return 0;
+	for (i = 0; i < MAX_PHY_LAYERS; i++)
+		if (cnfg->phy_layers[i].frm_layer != NULL &&
+				cnfg->phy_layers[i].ifindex == ifi)
+			return i;
+	return -ENODEV;
 }
 
 int cfcnfg_disconn_adapt_layer(struct cfcnfg *cnfg, struct cflayer *adap_layer)
diff --git a/net/caif/cfdbgl.c b/net/caif/cfdbgl.c
index 496fda9ac66f..11a2af4c162a 100644
--- a/net/caif/cfdbgl.c
+++ b/net/caif/cfdbgl.c
@@ -12,6 +12,8 @@
 #include <net/caif/cfsrvl.h>
 #include <net/caif/cfpkt.h>
 
+#define container_obj(layr) ((struct cfsrvl *) layr)
+
 static int cfdbgl_receive(struct cflayer *layr, struct cfpkt *pkt);
 static int cfdbgl_transmit(struct cflayer *layr, struct cfpkt *pkt);
 
@@ -38,5 +40,17 @@ static int cfdbgl_receive(struct cflayer *layr, struct cfpkt *pkt)
 
 static int cfdbgl_transmit(struct cflayer *layr, struct cfpkt *pkt)
 {
+	struct cfsrvl *service = container_obj(layr);
+	struct caif_payload_info *info;
+	int ret;
+
+	if (!cfsrvl_ready(service, &ret))
+		return ret;
+
+	/* Add info for MUX-layer to route the packet out */
+	info = cfpkt_info(pkt);
+	info->channel_id = service->layer.id;
+	info->dev_info = &service->dev_info;
+
 	return layr->dn->transmit(layr->dn, pkt);
 }
diff --git a/net/caif/cfrfml.c b/net/caif/cfrfml.c
index bde8481e8d25..e2fb5fa75795 100644
--- a/net/caif/cfrfml.c
+++ b/net/caif/cfrfml.c
@@ -193,7 +193,7 @@ out:
 
 static int cfrfml_transmit_segment(struct cfrfml *rfml, struct cfpkt *pkt)
 {
-	caif_assert(cfpkt_getlen(pkt) >= rfml->fragment_size);
+	caif_assert(cfpkt_getlen(pkt) < rfml->fragment_size);
 
 	/* Add info for MUX-layer to route the packet out. */
 	cfpkt_info(pkt)->channel_id = rfml->serv.layer.id;

From 2c24a5d1b4f48900f3ed1b1ad70c51f1983df822 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Sjur=20Br=C3=A6ndeland?= <sjur.brandeland@stericsson.com>
Date: Mon, 1 Nov 2010 11:52:48 +0000
Subject: [PATCH 0125/1066] caif: SPI-driver bugfix - incorrect padding.

Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/caif/caif_spi.c       | 57 +++++++++++++++++++++++--------
 drivers/net/caif/caif_spi_slave.c | 13 ++++---
 include/net/caif/caif_spi.h       |  2 ++
 3 files changed, 53 insertions(+), 19 deletions(-)

diff --git a/drivers/net/caif/caif_spi.c b/drivers/net/caif/caif_spi.c
index 8427533fe313..8b4cea57a6c5 100644
--- a/drivers/net/caif/caif_spi.c
+++ b/drivers/net/caif/caif_spi.c
@@ -33,6 +33,9 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Daniel Martensson<daniel.martensson@stericsson.com>");
 MODULE_DESCRIPTION("CAIF SPI driver");
 
+/* Returns the number of padding bytes for alignment. */
+#define PAD_POW2(x, pow) ((((x)&((pow)-1))==0) ? 0 : (((pow)-((x)&((pow)-1)))))
+
 static int spi_loop;
 module_param(spi_loop, bool, S_IRUGO);
 MODULE_PARM_DESC(spi_loop, "SPI running in loopback mode.");
@@ -41,7 +44,10 @@ MODULE_PARM_DESC(spi_loop, "SPI running in loopback mode.");
 module_param(spi_frm_align, int, S_IRUGO);
 MODULE_PARM_DESC(spi_frm_align, "SPI frame alignment.");
 
-/* SPI padding options. */
+/*
+ * SPI padding options.
+ * Warning: must be a base of 2 (& operation used) and can not be zero !
+ */
 module_param(spi_up_head_align, int, S_IRUGO);
 MODULE_PARM_DESC(spi_up_head_align, "SPI uplink head alignment.");
 
@@ -240,15 +246,13 @@ static ssize_t dbgfs_frame(struct file *file, char __user *user_buf,
 static const struct file_operations dbgfs_state_fops = {
 	.open = dbgfs_open,
 	.read = dbgfs_state,
-	.owner = THIS_MODULE,
-	.llseek = default_llseek,
+	.owner = THIS_MODULE
 };
 
 static const struct file_operations dbgfs_frame_fops = {
 	.open = dbgfs_open,
 	.read = dbgfs_frame,
-	.owner = THIS_MODULE,
-	.llseek = default_llseek,
+	.owner = THIS_MODULE
 };
 
 static inline void dev_debugfs_add(struct cfspi *cfspi)
@@ -337,6 +341,9 @@ int cfspi_xmitfrm(struct cfspi *cfspi, u8 *buf, size_t len)
 	u8 *dst = buf;
 	caif_assert(buf);
 
+	if (cfspi->slave && !cfspi->slave_talked)
+		cfspi->slave_talked = true;
+
 	do {
 		struct sk_buff *skb;
 		struct caif_payload_info *info;
@@ -357,8 +364,8 @@ int cfspi_xmitfrm(struct cfspi *cfspi, u8 *buf, size_t len)
 		 * Compute head offset i.e. number of bytes to add to
 		 * get the start of the payload aligned.
 		 */
-		if (spi_up_head_align) {
-			spad = 1 + ((info->hdr_len + 1) & spi_up_head_align);
+		if (spi_up_head_align > 1) {
+			spad = 1 + PAD_POW2((info->hdr_len + 1), spi_up_head_align);
 			*dst = (u8)(spad - 1);
 			dst += spad;
 		}
@@ -373,7 +380,7 @@ int cfspi_xmitfrm(struct cfspi *cfspi, u8 *buf, size_t len)
 		 * Compute tail offset i.e. number of bytes to add to
 		 * get the complete CAIF frame aligned.
 		 */
-		epad = (skb->len + spad) & spi_up_tail_align;
+		epad = PAD_POW2((skb->len + spad), spi_up_tail_align);
 		dst += epad;
 
 		dev_kfree_skb(skb);
@@ -417,14 +424,14 @@ int cfspi_xmitlen(struct cfspi *cfspi)
 		 * Compute head offset i.e. number of bytes to add to
 		 * get the start of the payload aligned.
 		 */
-		if (spi_up_head_align)
-			spad = 1 + ((info->hdr_len + 1) & spi_up_head_align);
+		if (spi_up_head_align > 1)
+			spad = 1 + PAD_POW2((info->hdr_len + 1), spi_up_head_align);
 
 		/*
 		 * Compute tail offset i.e. number of bytes to add to
 		 * get the complete CAIF frame aligned.
 		 */
-		epad = (skb->len + spad) & spi_up_tail_align;
+		epad = PAD_POW2((skb->len + spad), spi_up_tail_align);
 
 		if ((skb->len + spad + epad + frm_len) <= CAIF_MAX_SPI_FRAME) {
 			skb_queue_tail(&cfspi->chead, skb);
@@ -433,6 +440,7 @@ int cfspi_xmitlen(struct cfspi *cfspi)
 		} else {
 			/* Put back packet. */
 			skb_queue_head(&cfspi->qhead, skb);
+			break;
 		}
 	} while (pkts <= CAIF_MAX_SPI_PKTS);
 
@@ -453,6 +461,15 @@ static void cfspi_ss_cb(bool assert, struct cfspi_ifc *ifc)
 {
 	struct cfspi *cfspi = (struct cfspi *)ifc->priv;
 
+	/*
+	 * The slave device is the master on the link. Interrupts before the
+	 * slave has transmitted are considered spurious.
+	 */
+	if (cfspi->slave && !cfspi->slave_talked) {
+		printk(KERN_WARNING "CFSPI: Spurious SS interrupt.\n");
+		return;
+	}
+
 	if (!in_interrupt())
 		spin_lock(&cfspi->lock);
 	if (assert) {
@@ -465,7 +482,8 @@ static void cfspi_ss_cb(bool assert, struct cfspi_ifc *ifc)
 		spin_unlock(&cfspi->lock);
 
 	/* Wake up the xfer thread. */
-	wake_up_interruptible(&cfspi->wait);
+	if (assert)
+		wake_up_interruptible(&cfspi->wait);
 }
 
 static void cfspi_xfer_done_cb(struct cfspi_ifc *ifc)
@@ -523,7 +541,7 @@ int cfspi_rxfrm(struct cfspi *cfspi, u8 *buf, size_t len)
 		 * Compute head offset i.e. number of bytes added to
 		 * get the start of the payload aligned.
 		 */
-		if (spi_down_head_align) {
+		if (spi_down_head_align > 1) {
 			spad = 1 + *src;
 			src += spad;
 		}
@@ -564,7 +582,7 @@ int cfspi_rxfrm(struct cfspi *cfspi, u8 *buf, size_t len)
 		 * Compute tail offset i.e. number of bytes added to
 		 * get the complete CAIF frame aligned.
 		 */
-		epad = (pkt_len + spad) & spi_down_tail_align;
+		epad = PAD_POW2((pkt_len + spad), spi_down_tail_align);
 		src += epad;
 	} while ((src - buf) < len);
 
@@ -625,11 +643,20 @@ int cfspi_spi_probe(struct platform_device *pdev)
 	cfspi->ndev = ndev;
 	cfspi->pdev = pdev;
 
-	/* Set flow info */
+	/* Set flow info. */
 	cfspi->flow_off_sent = 0;
 	cfspi->qd_low_mark = LOW_WATER_MARK;
 	cfspi->qd_high_mark = HIGH_WATER_MARK;
 
+	/* Set slave info. */
+	if (!strncmp(cfspi_spi_driver.driver.name, "cfspi_sspi", 10)) {
+		cfspi->slave = true;
+		cfspi->slave_talked = false;
+	} else {
+		cfspi->slave = false;
+		cfspi->slave_talked = false;
+	}
+
 	/* Assign the SPI device. */
 	cfspi->dev = dev;
 	/* Assign the device ifc to this SPI interface. */
diff --git a/drivers/net/caif/caif_spi_slave.c b/drivers/net/caif/caif_spi_slave.c
index 2111dbfea6fe..1b9943a4edab 100644
--- a/drivers/net/caif/caif_spi_slave.c
+++ b/drivers/net/caif/caif_spi_slave.c
@@ -36,10 +36,15 @@ static inline int forward_to_spi_cmd(struct cfspi *cfspi)
 #endif
 
 int spi_frm_align = 2;
-int spi_up_head_align = 1;
-int spi_up_tail_align;
-int spi_down_head_align = 3;
-int spi_down_tail_align = 1;
+
+/*
+ * SPI padding options.
+ * Warning: must be a base of 2 (& operation used) and can not be zero !
+ */
+int spi_up_head_align   = 1 << 1;
+int spi_up_tail_align   = 1 << 0;
+int spi_down_head_align = 1 << 2;
+int spi_down_tail_align = 1 << 1;
 
 #ifdef CONFIG_DEBUG_FS
 static inline void debugfs_store_prev(struct cfspi *cfspi)
diff --git a/include/net/caif/caif_spi.h b/include/net/caif/caif_spi.h
index ce4570dff020..87c3d11b8e55 100644
--- a/include/net/caif/caif_spi.h
+++ b/include/net/caif/caif_spi.h
@@ -121,6 +121,8 @@ struct cfspi {
 	wait_queue_head_t wait;
 	spinlock_t lock;
 	bool flow_stop;
+	bool slave;
+	bool slave_talked;
 #ifdef CONFIG_DEBUG_FS
 	enum cfspi_state dbg_state;
 	u16 pcmd;

From 47d1ff176553fec3cb17854a7ca85036d3b0c4e7 Mon Sep 17 00:00:00 2001
From: "sjur.brandeland@stericsson.com" <sjur.brandeland@stericsson.com>
Date: Wed, 3 Nov 2010 10:19:25 +0000
Subject: [PATCH 0126/1066] caif: Remove noisy printout when disconnecting caif
 socket
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/caif/cfctrl.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/net/caif/cfctrl.c b/net/caif/cfctrl.c
index 08f267a109aa..3cd8f978e309 100644
--- a/net/caif/cfctrl.c
+++ b/net/caif/cfctrl.c
@@ -361,11 +361,10 @@ void cfctrl_cancel_req(struct cflayer *layr, struct cflayer *adap_layer)
 	struct cfctrl_request_info *p, *tmp;
 	struct cfctrl *ctrl = container_obj(layr);
 	spin_lock(&ctrl->info_list_lock);
-	pr_warn("enter\n");
 
 	list_for_each_entry_safe(p, tmp, &ctrl->list, list) {
 		if (p->client_layer == adap_layer) {
-			pr_warn("cancel req :%d\n", p->sequence_no);
+			pr_debug("cancel req :%d\n", p->sequence_no);
 			list_del(&p->list);
 			kfree(p);
 		}

From 1c260e49d5407a87e92f28dc020a9f70902841d7 Mon Sep 17 00:00:00 2001
From: Amerigo Wang <amwang@redhat.com>
Date: Tue, 2 Nov 2010 18:25:31 +0000
Subject: [PATCH 0127/1066] netxen: remove unused firmware exports

Quote from Amit Salecha:

"Actually I was not updated, NX_UNIFIED_ROMIMAGE_NAME (phanfw.bin) is already
submitted and its present in linux-firmware.git.

I will get back to you on NX_P2_MN_ROMIMAGE_NAME, NX_P3_CT_ROMIMAGE_NAME and
NX_P3_MN_ROMIMAGE_NAME. Whether this will be submitted ?"

We have to remove these, otherwise we will get wrong info from modinfo.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Amit Kumar Salecha <amit.salecha@qlogic.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dhananjay Phadke <dhananjay.phadke@qlogic.com>
Cc: Narender Kumar <narender.kumar@qlogic.com>
Acked-by:  Amit Kumar Salecha <amit.salecha@qlogic.com>--
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic_main.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index a75ba9517404..e1d30d7f2071 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -41,9 +41,6 @@
 MODULE_DESCRIPTION("QLogic/NetXen (1/10) GbE Converged Ethernet Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(NETXEN_NIC_LINUX_VERSIONID);
-MODULE_FIRMWARE(NX_P2_MN_ROMIMAGE_NAME);
-MODULE_FIRMWARE(NX_P3_CT_ROMIMAGE_NAME);
-MODULE_FIRMWARE(NX_P3_MN_ROMIMAGE_NAME);
 MODULE_FIRMWARE(NX_UNIFIED_ROMIMAGE_NAME);
 
 char netxen_nic_driver_name[] = "netxen_nic";

From 7b8e824651c5d2d107627df6eaff025cf17200e4 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Wed, 3 Nov 2010 12:11:21 +0000
Subject: [PATCH 0128/1066] atl1 : fix panic on load

Its now illegal to call netif_stop_queue() before register_netdev()

Reported-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/atlx/atl1.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 43579b3b24ac..53363108994e 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -3043,7 +3043,6 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
 	atl1_pcie_patch(adapter);
 	/* assume we have no link for now */
 	netif_carrier_off(netdev);
-	netif_stop_queue(netdev);
 
 	setup_timer(&adapter->phy_config_timer, atl1_phy_config,
 		    (unsigned long)adapter);

From 53ab2221da7676dd0f161bec5e1520e56b74a865 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Wed, 3 Nov 2010 12:25:32 +0000
Subject: [PATCH 0129/1066] de2104x: fix panic on load

Its now illegal to call netif_stop_queue() before register_netdev()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/de2104x.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index 28e1ffb13db9..c78a50586c1d 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -2021,7 +2021,6 @@ static int __devinit de_init_one (struct pci_dev *pdev,
 	de->media_timer.data = (unsigned long) de;
 
 	netif_carrier_off(dev);
-	netif_stop_queue(dev);
 
 	/* wake up device, assign resources */
 	rc = pci_enable_device(pdev);

From 58c490babd4b425310363cbd1f406d7e508f77a5 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@parallels.com>
Date: Tue, 2 Nov 2010 01:52:05 +0000
Subject: [PATCH 0130/1066] rds: Lost locking in loop connection freeing

The conn is removed from list in there and this requires
proper lock protection.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/rds/loop.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/rds/loop.c b/net/rds/loop.c
index c390156b426f..aeec1d483b17 100644
--- a/net/rds/loop.c
+++ b/net/rds/loop.c
@@ -134,8 +134,12 @@ static int rds_loop_conn_alloc(struct rds_connection *conn, gfp_t gfp)
 static void rds_loop_conn_free(void *arg)
 {
 	struct rds_loop_connection *lc = arg;
+	unsigned long flags;
+
 	rdsdebug("lc %p\n", lc);
+	spin_lock_irqsave(&loop_conns_lock, flags);
 	list_del(&lc->loop_node);
+	spin_unlock_irqrestore(&loop_conns_lock, flags);
 	kfree(lc);
 }
 

From 8200a59f24aeca379660f80658a8c0c343ca5c31 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@parallels.com>
Date: Tue, 2 Nov 2010 01:54:01 +0000
Subject: [PATCH 0131/1066] rds: Remove kfreed tcp conn from list

All the rds_tcp_connection objects are stored list, but when
being freed it should be removed from there.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/rds/tcp.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/rds/tcp.c b/net/rds/tcp.c
index 08a8c6cf2d10..8e0a32001c90 100644
--- a/net/rds/tcp.c
+++ b/net/rds/tcp.c
@@ -221,7 +221,13 @@ static int rds_tcp_conn_alloc(struct rds_connection *conn, gfp_t gfp)
 static void rds_tcp_conn_free(void *arg)
 {
 	struct rds_tcp_connection *tc = arg;
+	unsigned long flags;
 	rdsdebug("freeing tc %p\n", tc);
+
+	spin_lock_irqsave(&rds_tcp_conn_lock, flags);
+	list_del(&tc->t_tcp_node);
+	spin_unlock_irqrestore(&rds_tcp_conn_lock, flags);
+
 	kmem_cache_free(rds_tcp_conn_slab, tc);
 }
 

From 41bb78b4b9adb21cf2c395b6b880aaae99c788b7 Mon Sep 17 00:00:00 2001
From: Xiaotian Feng <dfeng@redhat.com>
Date: Tue, 2 Nov 2010 16:11:05 +0000
Subject: [PATCH 0132/1066] net dst: fix percpu_counter list corruption and
 poison overwritten

There're some percpu_counter list corruption and poison overwritten warnings
in recent kernel, which is resulted by fc66f95c.

commit fc66f95c switches to use percpu_counter, in ip6_route_net_init, kernel
init the percpu_counter for dst entries, but, the percpu_counter is never destroyed
in ip6_route_net_exit. So if the related data is freed by kernel, the freed percpu_counter
is still on the list, then if we insert/remove other percpu_counter, list corruption
resulted. Also, if the insert/remove option modifies the ->prev,->next pointer of
the freed value, the poison overwritten is resulted then.

With the following patch, the percpu_counter list corruption and poison overwritten
warnings disappeared.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/route.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 25661f968f3f..fc328339be99 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -2741,6 +2741,7 @@ static void __net_exit ip6_route_net_exit(struct net *net)
 	kfree(net->ipv6.ip6_prohibit_entry);
 	kfree(net->ipv6.ip6_blk_hole_entry);
 #endif
+	dst_entries_destroy(&net->ipv6.ip6_dst_ops);
 }
 
 static struct pernet_operations ip6_route_net_ops = {
@@ -2832,5 +2833,6 @@ void ip6_route_cleanup(void)
 	xfrm6_fini();
 	fib6_gc_cleanup();
 	unregister_pernet_subsys(&ip6_route_net_ops);
+	dst_entries_destroy(&ip6_dst_blackhole_ops);
 	kmem_cache_destroy(ip6_dst_ops_template.kmem_cachep);
 }

From a6331d6f9a4298173b413cf99a40cc86a9d92c37 Mon Sep 17 00:00:00 2001
From: andrew hendry <andrew.hendry@gmail.com>
Date: Wed, 3 Nov 2010 12:54:53 +0000
Subject: [PATCH 0133/1066] memory corruption in X.25 facilities parsing

Signed-of-by: Andrew Hendry <andrew.hendry@gmail.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/x25/x25_facilities.c | 8 ++++----
 net/x25/x25_in.c         | 2 ++
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/net/x25/x25_facilities.c b/net/x25/x25_facilities.c
index 771bab00754b..3a8c4c419cd4 100644
--- a/net/x25/x25_facilities.c
+++ b/net/x25/x25_facilities.c
@@ -134,15 +134,15 @@ int x25_parse_facilities(struct sk_buff *skb, struct x25_facilities *facilities,
 		case X25_FAC_CLASS_D:
 			switch (*p) {
 			case X25_FAC_CALLING_AE:
-				if (p[1] > X25_MAX_DTE_FACIL_LEN)
-					break;
+				if (p[1] > X25_MAX_DTE_FACIL_LEN || p[1] <= 1)
+					return 0;
 				dte_facs->calling_len = p[2];
 				memcpy(dte_facs->calling_ae, &p[3], p[1] - 1);
 				*vc_fac_mask |= X25_MASK_CALLING_AE;
 				break;
 			case X25_FAC_CALLED_AE:
-				if (p[1] > X25_MAX_DTE_FACIL_LEN)
-					break;
+				if (p[1] > X25_MAX_DTE_FACIL_LEN || p[1] <= 1)
+					return 0;
 				dte_facs->called_len = p[2];
 				memcpy(dte_facs->called_ae, &p[3], p[1] - 1);
 				*vc_fac_mask |= X25_MASK_CALLED_AE;
diff --git a/net/x25/x25_in.c b/net/x25/x25_in.c
index 63178961efac..f729f022be69 100644
--- a/net/x25/x25_in.c
+++ b/net/x25/x25_in.c
@@ -119,6 +119,8 @@ static int x25_state1_machine(struct sock *sk, struct sk_buff *skb, int frametyp
 						&x25->vc_facil_mask);
 			if (len > 0)
 				skb_pull(skb, len);
+			else
+				return -1;
 			/*
 			 *	Copy any Call User Data.
 			 */

From c00b2c9e79466d61979cd21af526cc6d5d0ee04f Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Wed, 3 Nov 2010 13:31:05 +0000
Subject: [PATCH 0134/1066] cls_cgroup: Fix crash on module unload

Somewhere along the lines net_cls_subsys_id became a macro when
cls_cgroup is built as a module.  Not only did it make cls_cgroup
completely useless, it also causes it to crash on module unload.

This patch fixes this by removing that macro.

Thanks to Eric Dumazet for diagnosing this problem.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/cls_cgroup.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/net/sched/cls_cgroup.c b/net/sched/cls_cgroup.c
index 37dff78e9cb1..d49c40fb7e09 100644
--- a/net/sched/cls_cgroup.c
+++ b/net/sched/cls_cgroup.c
@@ -34,8 +34,6 @@ struct cgroup_subsys net_cls_subsys = {
 	.populate	= cgrp_populate,
 #ifdef CONFIG_NET_CLS_CGROUP
 	.subsys_id	= net_cls_subsys_id,
-#else
-#define net_cls_subsys_id net_cls_subsys.subsys_id
 #endif
 	.module		= THIS_MODULE,
 };

From cccbe5ef85284621d19e5b2b1c61cc0506bc9dee Mon Sep 17 00:00:00 2001
From: Jan Engelhardt <jengelh@medozas.de>
Date: Wed, 3 Nov 2010 18:55:39 -0700
Subject: [PATCH 0135/1066] netfilter: ip6_tables: fix information leak to
 userspace

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/netfilter/ip6_tables.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index 51df035897e7..455582384ece 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -1137,6 +1137,7 @@ static int get_info(struct net *net, void __user *user,
 			private = &tmp;
 		}
 #endif
+		memset(&info, 0, sizeof(info));
 		info.valid_hooks = t->valid_hooks;
 		memcpy(info.hook_entry, private->hook_entry,
 		       sizeof(info.hook_entry));

From cad3cde3f6f2a7854489f957dc22aa9a23afb06c Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 4 Nov 2010 12:19:11 +0900
Subject: [PATCH 0136/1066] ARM: mach-shmobile: Allow GPIO chips to register
 IRQ mappings.

As non-PFC chips are added that may support IRQs, pass through to the
generic helper. This follows the the SH change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/include/mach/gpio.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h
index 5bc6bd444d72..2b1bb9e43dda 100644
--- a/arch/arm/mach-shmobile/include/mach/gpio.h
+++ b/arch/arm/mach-shmobile/include/mach/gpio.h
@@ -35,12 +35,12 @@ static inline int gpio_cansleep(unsigned gpio)
 
 static inline int gpio_to_irq(unsigned gpio)
 {
-	return -ENOSYS;
+	return __gpio_to_irq(gpio);
 }
 
 static inline int irq_to_gpio(unsigned int irq)
 {
-	return -EINVAL;
+	return -ENOSYS;
 }
 
 #endif /* CONFIG_GPIOLIB */

From 2f6ba5792ce9e4a731baeb976ccc72e0cf43d20b Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 4 Nov 2010 12:21:25 +0900
Subject: [PATCH 0137/1066] mmc: sh_mmcif: Convert extern inline to static
 inline.

Presently the extern inline case results in a compiler warning on ARM due
to the memory barrier definition used in the I/O routines. These
ultimately all want to be static inline anyways, so just convert them all
in place.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 include/linux/mmc/sh_mmcif.h | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h
index d19e2114fd86..5c99da1078aa 100644
--- a/include/linux/mmc/sh_mmcif.h
+++ b/include/linux/mmc/sh_mmcif.h
@@ -59,19 +59,19 @@ struct sh_mmcif_plat_data {
 #define MMCIF_CE_HOST_STS2	0x0000004C
 #define MMCIF_CE_VERSION	0x0000007C
 
-extern inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
+static inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
 {
 	return readl(addr + reg);
 }
 
-extern inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val)
+static inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val)
 {
 	writel(val, addr + reg);
 }
 
 #define SH_MMCIF_BBS 512 /* boot block size */
 
-extern inline void sh_mmcif_boot_cmd_send(void __iomem *base,
+static inline void sh_mmcif_boot_cmd_send(void __iomem *base,
 					  unsigned long cmd, unsigned long arg)
 {
 	sh_mmcif_writel(base, MMCIF_CE_INT, 0);
@@ -79,7 +79,7 @@ extern inline void sh_mmcif_boot_cmd_send(void __iomem *base,
 	sh_mmcif_writel(base, MMCIF_CE_CMD_SET, cmd);
 }
 
-extern inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask)
+static inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask)
 {
 	unsigned long tmp;
 	int cnt;
@@ -95,14 +95,14 @@ extern inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask)
 	return -1;
 }
 
-extern inline int sh_mmcif_boot_cmd(void __iomem *base,
+static inline int sh_mmcif_boot_cmd(void __iomem *base,
 				    unsigned long cmd, unsigned long arg)
 {
 	sh_mmcif_boot_cmd_send(base, cmd, arg);
 	return sh_mmcif_boot_cmd_poll(base, 0x00010000);
 }
 
-extern inline int sh_mmcif_boot_do_read_single(void __iomem *base,
+static inline int sh_mmcif_boot_do_read_single(void __iomem *base,
 					       unsigned int block_nr,
 					       unsigned long *buf)
 {
@@ -125,7 +125,7 @@ extern inline int sh_mmcif_boot_do_read_single(void __iomem *base,
 	return 0;
 }
 
-extern inline int sh_mmcif_boot_do_read(void __iomem *base,
+static inline int sh_mmcif_boot_do_read(void __iomem *base,
 					unsigned long first_block,
 					unsigned long nr_blocks,
 					void *buf)
@@ -143,7 +143,7 @@ extern inline int sh_mmcif_boot_do_read(void __iomem *base,
 	return ret;
 }
 
-extern inline void sh_mmcif_boot_init(void __iomem *base)
+static inline void sh_mmcif_boot_init(void __iomem *base)
 {
 	unsigned long tmp;
 
@@ -177,7 +177,7 @@ extern inline void sh_mmcif_boot_init(void __iomem *base)
 	sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000);
 }
 
-extern inline void sh_mmcif_boot_slurp(void __iomem *base,
+static inline void sh_mmcif_boot_slurp(void __iomem *base,
 				       unsigned char *buf,
 				       unsigned long no_bytes)
 {

From e96ce8ebfd7427c7ce335028f6619fb549f366b2 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 4 Nov 2010 12:29:00 +0900
Subject: [PATCH 0138/1066] sh: mach-se: Fix up SE7206 no ioport build.

There was a leftover inw() used here that really just wants to be a
__raw_readw() instead. Convert it over.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7206/irq.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
index 883b21eacaa6..d961949600fd 100644
--- a/arch/sh/boards/mach-se/7206/irq.c
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -139,11 +139,13 @@ void __init init_se7206_IRQ(void)
 	make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
 	make_se7206_irq(IRQ1_IRQ); /* ATA */
 	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
-	__raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
+
+	__raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR); /* ICR1 */
 
 	/* FPGA System register setup*/
 	__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
 	__raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
+
 	/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
 	__raw_writew(0x0001,INTSEL);
 }

From e2fcf74f3d3dabe8591732cd37869a0cc88ed7a5 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 4 Nov 2010 12:32:24 +0900
Subject: [PATCH 0139/1066] sh: nommu: use 32-bit phys mode.

The nommu code has regressed somewhat in that 29BIT gets set for the
SH-2/2A configs regardless of the fact that they are really 32BIT sans
MMU or PMB. This does a bit of tidying to get nommu properly selecting
32BIT as it was before.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                 |  1 +
 arch/sh/include/asm/addrspace.h |  8 ++++----
 arch/sh/mm/Kconfig              |  2 +-
 arch/sh/mm/consistent.c         | 15 +++++++--------
 arch/sh/mm/uncached.c           |  2 +-
 5 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 5c075f562eba..7f217b3a50a8 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -193,6 +193,7 @@ config CPU_SH2
 config CPU_SH2A
 	bool
 	select CPU_SH2
+	select UNCACHED_MAPPING
 
 config CPU_SH3
 	bool
diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h
index 446b3831c214..3d1ae2bfaa6f 100644
--- a/arch/sh/include/asm/addrspace.h
+++ b/arch/sh/include/asm/addrspace.h
@@ -44,10 +44,10 @@
 /*
  * These will never work in 32-bit, don't even bother.
  */
-#define P1SEGADDR(a)	__futile_remapping_attempt
-#define P2SEGADDR(a)	__futile_remapping_attempt
-#define P3SEGADDR(a)	__futile_remapping_attempt
-#define P4SEGADDR(a)	__futile_remapping_attempt
+#define P1SEGADDR(a)	({ (void)(a); BUG(); NULL; })
+#define P2SEGADDR(a)	({ (void)(a); BUG(); NULL; })
+#define P3SEGADDR(a)	({ (void)(a); BUG(); NULL; })
+#define P4SEGADDR(a)	({ (void)(a); BUG(); NULL; })
 #endif
 #endif /* P1SEG */
 
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 09370392aff1..c3e61b366493 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -79,7 +79,7 @@ config 29BIT
 
 config 32BIT
 	bool
-	default y if CPU_SH5
+	default y if CPU_SH5 || !MMU
 
 config PMB
 	bool "Support 32-bit physical addressing through PMB"
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index 038793286990..40733a952402 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -79,21 +79,20 @@ void dma_generic_free_coherent(struct device *dev, size_t size,
 void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		    enum dma_data_direction direction)
 {
-#if defined(CONFIG_CPU_SH5) || defined(CONFIG_PMB)
-	void *p1addr = vaddr;
-#else
-	void *p1addr = (void*) P1SEGADDR((unsigned long)vaddr);
-#endif
+	void *addr;
+
+	addr = __in_29bit_mode() ?
+	       (void *)P1SEGADDR((unsigned long)vaddr) : vaddr;
 
 	switch (direction) {
 	case DMA_FROM_DEVICE:		/* invalidate only */
-		__flush_invalidate_region(p1addr, size);
+		__flush_invalidate_region(addr, size);
 		break;
 	case DMA_TO_DEVICE:		/* writeback only */
-		__flush_wback_region(p1addr, size);
+		__flush_wback_region(addr, size);
 		break;
 	case DMA_BIDIRECTIONAL:		/* writeback and invalidate */
-		__flush_purge_region(p1addr, size);
+		__flush_purge_region(addr, size);
 		break;
 	default:
 		BUG();
diff --git a/arch/sh/mm/uncached.c b/arch/sh/mm/uncached.c
index 8a4eca551fc0..a7767da815e9 100644
--- a/arch/sh/mm/uncached.c
+++ b/arch/sh/mm/uncached.c
@@ -28,7 +28,7 @@ EXPORT_SYMBOL(virt_addr_uncached);
 
 void __init uncached_init(void)
 {
-#ifdef CONFIG_29BIT
+#if defined(CONFIG_29BIT) || !defined(CONFIG_MMU)
 	uncached_start = P2SEG;
 #else
 	uncached_start = memory_end;

From edc9a958fd31ef1d89f9eaee82b2a3882c8e34c9 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 4 Nov 2010 12:46:19 +0900
Subject: [PATCH 0140/1066] sh: nommu: Support building without an uncached
 mapping.

Now that nommu selects 32BIT we run in to the situation where SH-2A
supports an uncached identity mapping by way of the BSC, while the SH-2
does not. This provides stubs for the PC manglers and tidies up some of
the system*.h mess in the process.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/system.h    |  4 +---
 arch/sh/include/asm/system_32.h | 36 -----------------------------
 arch/sh/include/asm/system_64.h |  3 ---
 arch/sh/include/asm/uncached.h  | 40 +++++++++++++++++++++++++++++++++
 4 files changed, 41 insertions(+), 42 deletions(-)

diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
index 1f1af5afff03..10c8b1823a18 100644
--- a/arch/sh/include/asm/system.h
+++ b/arch/sh/include/asm/system.h
@@ -10,6 +10,7 @@
 #include <linux/compiler.h>
 #include <linux/linkage.h>
 #include <asm/types.h>
+#include <asm/uncached.h>
 
 #define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
 
@@ -137,9 +138,6 @@ extern unsigned int instruction_size(unsigned int insn);
 #define instruction_size(insn)	(4)
 #endif
 
-extern unsigned long cached_to_uncached;
-extern unsigned long uncached_size;
-
 void per_cpu_trap_init(void);
 void default_idle(void);
 void cpu_idle_wait(void);
diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h
index c941b2739405..a4ad1cd9bc4d 100644
--- a/arch/sh/include/asm/system_32.h
+++ b/arch/sh/include/asm/system_32.h
@@ -145,42 +145,6 @@ do {								\
 		__restore_dsp(prev);				\
 } while (0)
 
-/*
- * Jump to uncached area.
- * When handling TLB or caches, we need to do it from an uncached area.
- */
-#define jump_to_uncached()			\
-do {						\
-	unsigned long __dummy;			\
-						\
-	__asm__ __volatile__(			\
-		"mova	1f, %0\n\t"		\
-		"add	%1, %0\n\t"		\
-		"jmp	@%0\n\t"		\
-		" nop\n\t"			\
-		".balign 4\n"			\
-		"1:"				\
-		: "=&z" (__dummy)		\
-		: "r" (cached_to_uncached));	\
-} while (0)
-
-/*
- * Back to cached area.
- */
-#define back_to_cached()				\
-do {							\
-	unsigned long __dummy;				\
-	ctrl_barrier();					\
-	__asm__ __volatile__(				\
-		"mov.l	1f, %0\n\t"			\
-		"jmp	@%0\n\t"			\
-		" nop\n\t"				\
-		".balign 4\n"				\
-		"1:	.long 2f\n"			\
-		"2:"					\
-		: "=&r" (__dummy));			\
-} while (0)
-
 #ifdef CONFIG_CPU_HAS_SR_RB
 #define lookup_exception_vector()	\
 ({					\
diff --git a/arch/sh/include/asm/system_64.h b/arch/sh/include/asm/system_64.h
index 36338646dfc8..8593bc8d1a4e 100644
--- a/arch/sh/include/asm/system_64.h
+++ b/arch/sh/include/asm/system_64.h
@@ -34,9 +34,6 @@ do {								\
 			      &next->thread);			\
 } while (0)
 
-#define jump_to_uncached()	do { } while (0)
-#define back_to_cached()	do { } while (0)
-
 #define __icbi(addr)	__asm__ __volatile__ ( "icbi %0, 0\n\t" : : "r" (addr))
 #define __ocbp(addr)	__asm__ __volatile__ ( "ocbp %0, 0\n\t" : : "r" (addr))
 #define __ocbi(addr)	__asm__ __volatile__ ( "ocbi %0, 0\n\t" : : "r" (addr))
diff --git a/arch/sh/include/asm/uncached.h b/arch/sh/include/asm/uncached.h
index e3419f96626a..6f8816b79cf1 100644
--- a/arch/sh/include/asm/uncached.h
+++ b/arch/sh/include/asm/uncached.h
@@ -4,15 +4,55 @@
 #include <linux/bug.h>
 
 #ifdef CONFIG_UNCACHED_MAPPING
+extern unsigned long cached_to_uncached;
+extern unsigned long uncached_size;
 extern unsigned long uncached_start, uncached_end;
 
 extern int virt_addr_uncached(unsigned long kaddr);
 extern void uncached_init(void);
 extern void uncached_resize(unsigned long size);
+
+/*
+ * Jump to uncached area.
+ * When handling TLB or caches, we need to do it from an uncached area.
+ */
+#define jump_to_uncached()			\
+do {						\
+	unsigned long __dummy;			\
+						\
+	__asm__ __volatile__(			\
+		"mova	1f, %0\n\t"		\
+		"add	%1, %0\n\t"		\
+		"jmp	@%0\n\t"		\
+		" nop\n\t"			\
+		".balign 4\n"			\
+		"1:"				\
+		: "=&z" (__dummy)		\
+		: "r" (cached_to_uncached));	\
+} while (0)
+
+/*
+ * Back to cached area.
+ */
+#define back_to_cached()				\
+do {							\
+	unsigned long __dummy;				\
+	ctrl_barrier();					\
+	__asm__ __volatile__(				\
+		"mov.l	1f, %0\n\t"			\
+		"jmp	@%0\n\t"			\
+		" nop\n\t"				\
+		".balign 4\n"				\
+		"1:	.long 2f\n"			\
+		"2:"					\
+		: "=&r" (__dummy));			\
+} while (0)
 #else
 #define virt_addr_uncached(kaddr)	(0)
 #define uncached_init()			do { } while (0)
 #define uncached_resize(size)		BUG()
+#define jump_to_uncached()		do { } while (0)
+#define back_to_cached()		do { } while (0)
 #endif
 
 #endif /* __ASM_SH_UNCACHED_H */

From ccedb20c6879ac0237b95b3500d69822f1e5e2ea Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 4 Nov 2010 12:51:08 +0900
Subject: [PATCH 0141/1066] sh: Simplify phys_addr_mask()/PTE_PHYS_MASK for
 29/32-bit.

Given that __in_29bit_mode() is a constant for the non-PMB case, we can
simply use the PMB-facing version of phys_addr_mask() and drop the other
variants.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/pgtable.h | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index a15f1058bbf4..083ea068e819 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -66,7 +66,6 @@ static inline unsigned long long neff_sign_extend(unsigned long val)
 #define PHYS_ADDR_MASK29		0x1fffffff
 #define PHYS_ADDR_MASK32		0xffffffff
 
-#ifdef CONFIG_PMB
 static inline unsigned long phys_addr_mask(void)
 {
 	/* Is the MMU in 29bit mode? */
@@ -75,17 +74,6 @@ static inline unsigned long phys_addr_mask(void)
 
 	return PHYS_ADDR_MASK32;
 }
-#elif defined(CONFIG_32BIT)
-static inline unsigned long phys_addr_mask(void)
-{
-	return PHYS_ADDR_MASK32;
-}
-#else
-static inline unsigned long phys_addr_mask(void)
-{
-	return PHYS_ADDR_MASK29;
-}
-#endif
 
 #define PTE_PHYS_MASK		(phys_addr_mask() & PAGE_MASK)
 #define PTE_FLAGS_MASK		(~(PTE_PHYS_MASK) << PAGE_SHIFT)

From 5e84e1a487bf6ae912aac1142bdf399b8bdc9238 Mon Sep 17 00:00:00 2001
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Date: Thu, 28 Oct 2010 16:38:08 +0800
Subject: [PATCH 0142/1066] drm/i915: Fix KMS regression on Sandybridge/CPT

We should enable FDI normal training on Sandybridge/CPT system
as well.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
[ickle: removed unrelated chunks]
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_display.c | 54 +++++++++++++++++-----------
 1 file changed, 33 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 528aa06d430d..5e839c762456 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1681,6 +1681,37 @@ static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
 	udelay(500);
 }
 
+static void intel_fdi_normal_train(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp;
+
+	/* enable normal train */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
+	I915_WRITE(reg, temp);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (HAS_PCH_CPT(dev)) {
+		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+		temp |= FDI_LINK_TRAIN_NORMAL_CPT;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_NONE;
+	}
+	I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
+
+	/* wait one idle pattern time */
+	POSTING_READ(reg);
+	udelay(1000);
+}
+
 /* The FDI link training functions for ILK/Ibexpeak. */
 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
 {
@@ -1767,27 +1798,6 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc)
 
 	DRM_DEBUG_KMS("FDI train done\n");
 
-	/* enable normal train */
-	reg = FDI_TX_CTL(pipe);
-	temp = I915_READ(reg);
-	temp &= ~FDI_LINK_TRAIN_NONE;
-	temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
-	I915_WRITE(reg, temp);
-
-	reg = FDI_RX_CTL(pipe);
-	temp = I915_READ(reg);
-	if (HAS_PCH_CPT(dev)) {
-		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
-		temp |= FDI_LINK_TRAIN_NORMAL_CPT;
-	} else {
-		temp &= ~FDI_LINK_TRAIN_NONE;
-		temp |= FDI_LINK_TRAIN_NONE;
-	}
-	I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
-
-	/* wait one idle pattern time */
-	POSTING_READ(reg);
-	udelay(1000);
 }
 
 static const int const snb_b_fdi_train_param [] = {
@@ -2090,6 +2100,8 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 	I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
 	I915_WRITE(TRANS_VSYNC(pipe),  I915_READ(VSYNC(pipe)));
 
+	intel_fdi_normal_train(crtc);
+
 	/* For PCH DP, enable TRANS_DP_CTL */
 	if (HAS_PCH_CPT(dev) &&
 	    intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {

From e07ac3a0b17ed9dec26b742ea41514063ef12386 Mon Sep 17 00:00:00 2001
From: Zhenyu Wang <zhenyu.z.wang@intel.com>
Date: Thu, 4 Nov 2010 09:02:54 +0000
Subject: [PATCH 0143/1066] drm/i915; Don't apply Ironlake FDI clock workaround
 to Sandybridge

Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_drv.h      | 1 +
 drivers/gpu/drm/i915/intel_display.c | 7 ++++---
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 2c2c19b6285e..90414ae86afc 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1321,6 +1321,7 @@ static inline void i915_write(struct drm_i915_private *dev_priv, u32 reg,
 
 #define INTEL_PCH_TYPE(dev) (((struct drm_i915_private *)(dev)->dev_private)->pch_type)
 #define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
+#define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
 
 #define PRIMARY_RINGBUFFER_SIZE         (128*1024)
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 5e839c762456..48d8fd686ea9 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2212,9 +2212,10 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
 	udelay(100);
 
 	/* Ironlake workaround, disable clock pointer after downing FDI */
-	I915_WRITE(FDI_RX_CHICKEN(pipe),
-		   I915_READ(FDI_RX_CHICKEN(pipe) &
-			     ~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
+	if (HAS_PCH_IBX(dev))
+		I915_WRITE(FDI_RX_CHICKEN(pipe),
+			   I915_READ(FDI_RX_CHICKEN(pipe) &
+				     ~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
 
 	/* still set train pattern 1 */
 	reg = FDI_TX_CTL(pipe);

From 8d0f56708292ca5c256ee3b7187d124afee81d93 Mon Sep 17 00:00:00 2001
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Date: Tue, 2 Nov 2010 17:30:47 +0800
Subject: [PATCH 0144/1066] agp/intel: restore cache behavior on sandybridge

This restores cache behavior for default AGP_USER_MEMORY as
uncached, and leave default AGP_USER_CACHED_MEMORY as LLC only.
I've seen different cache behavior on one sandybridge desktop CPU vs.
another mobile CPU. Until we figure out how to detect the real cache
config, restore back to the original behavior now.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/char/agp/intel-gtt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 6b6760ea2435..791216d33ed0 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -1210,7 +1210,7 @@ static void gen6_write_entry(dma_addr_t addr, unsigned int entry,
 	unsigned int gfdt = flags & AGP_USER_CACHED_MEMORY_GFDT;
 	u32 pte_flags;
 
-	if (type_mask == AGP_USER_UNCACHED_MEMORY)
+	if (type_mask == AGP_USER_MEMORY)
 		pte_flags = GEN6_PTE_UNCACHED | I810_PTE_VALID;
 	else if (type_mask == AGP_USER_CACHED_MEMORY_LLC_MLC) {
 		pte_flags = GEN6_PTE_LLC | I810_PTE_VALID;

From 16a02cf08a2de0863daf7ebb91718d7c6bbe7f9c Mon Sep 17 00:00:00 2001
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Date: Tue, 2 Nov 2010 17:30:46 +0800
Subject: [PATCH 0145/1066] agp/intel: fix cache control for sandybridge

This is broken from 97ef1bdd0bc75bce7b2058e9c432b6c277dcf4d3.
Let's set the correct bit for LLC+MLC and LLC only.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/char/agp/intel-gtt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 791216d33ed0..9272c38dd3c6 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -1213,11 +1213,11 @@ static void gen6_write_entry(dma_addr_t addr, unsigned int entry,
 	if (type_mask == AGP_USER_MEMORY)
 		pte_flags = GEN6_PTE_UNCACHED | I810_PTE_VALID;
 	else if (type_mask == AGP_USER_CACHED_MEMORY_LLC_MLC) {
-		pte_flags = GEN6_PTE_LLC | I810_PTE_VALID;
+		pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID;
 		if (gfdt)
 			pte_flags |= GEN6_PTE_GFDT;
 	} else { /* set 'normal'/'cached' to LLC by default */
-		pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID;
+		pte_flags = GEN6_PTE_LLC | I810_PTE_VALID;
 		if (gfdt)
 			pte_flags |= GEN6_PTE_GFDT;
 	}

From 73b14484fb686252aaf4aac4fa65b45139ed8514 Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Thu, 4 Nov 2010 08:38:18 -0700
Subject: [PATCH 0146/1066] Input: i8042 - add Sony VAIOs to MUX blacklist

The Sony VPCZ1 doesn't support active multiplexing and trying to enable
it causes keyboard to stop working. Since most (all?) VAIOs do not have
external PS/2 ports nor they implement active multiplexing properly, and
trying to enable MUX usually messes up keyboard/touchpad, let's simply
disable MUX probing based on board name (VAIO).

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/serio/i8042-x86ia64io.h | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index ed7ad7416b24..a5475b577086 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -350,6 +350,17 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ240E"),
 		},
 	},
+	{
+		/*
+		 * Most (all?) VAIOs do not have external PS/2 ports nor
+		 * they implement active multiplexing properly, and
+		 * MUX discovery usually messes up keyboard/touchpad.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "VAIO"),
+		},
+	},
 	{
 		/* Amoi M636/A737 */
 		.matches = {

From 8c5188b6d350d033275eaf85faa12f284e2909e4 Mon Sep 17 00:00:00 2001
From: Benjamin LaHaise <bcrl@kvack.org>
Date: Thu, 4 Nov 2010 10:29:13 -0700
Subject: [PATCH 0147/1066] Input: atkbd - add 'terminal' parameter for IBM
 Terminal keyboards
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Many of the IBM Terminal keyboards from the 1980s and early 1990s communicate
using a protocol similar, but not identical to the AT keyboard protocol.
(Models known to be like this include 6110344, 6110668, 1390876, 1386887, and
possibly others.)

When the connector is rewired or adapter to an AT-DIN or PS/2 connector, they
can be connected to a standard PC, with three caveats:

a) They can only use scancode set 3; requests to use anything else are
quietly ignored.
b) The AT Command to request Make, Break and Repeat codes is not properly
interpreted.
c) The top function keys on a 122 key keyboard, and the arrow/edit keys in
the middle of the board send non-standard scancodes.

C) is easily taken care of in userspace, by use of setkeycodes
B) can be taken care of by a userspace hack (that makes the kernel complain
in dmesg)
A) is fixable in theory, but on the keyboard i tested on (6110668), it seems
to be detected unoverridably as Set 2, causing userspace oddities that make
it harder to fix C).

Enclosed is a small patch to the kernel that fixes A) and B) in the kernel,
making it much easier to fix C) in userspace. It adds a single kernel
command line parameter that overrides the detection that sets these boards
as set 2, and instead of sending the Make-break-repeat command to the
keyboard, it sends the make-break command, which is properly recognized by
these keyboards. Software level key repeating seems to make up for the lack
of hardware repeat codes perfectly.

Without manually setting the command line parameter (tentatively named
atkbd.terminal), this code has no effect, and the driver works exactly as
before.

See also:

http://www.seasip.info/VintagePC/ibm_1390876.html
http://www.seasip.info/VintagePC/ibm_6110344.html
http://geekhack.org/showwiki.php?title=Island:7306

Signed-off-by: Erika Quinn <erikas.aubade@gmail.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/atkbd.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index d358ef8623f4..11478eb2c27d 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -63,6 +63,10 @@ static bool atkbd_extra;
 module_param_named(extra, atkbd_extra, bool, 0);
 MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
 
+static bool atkbd_terminal;
+module_param_named(terminal, atkbd_terminal, bool, 0);
+MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2");
+
 /*
  * Scancode to keycode tables. These are just the default setting, and
  * are loadable via a userland utility.
@@ -136,7 +140,8 @@ static const unsigned short atkbd_unxlate_table[128] = {
 #define ATKBD_CMD_ENABLE	0x00f4
 #define ATKBD_CMD_RESET_DIS	0x00f5	/* Reset to defaults and disable */
 #define ATKBD_CMD_RESET_DEF	0x00f6	/* Reset to defaults */
-#define ATKBD_CMD_SETALL_MBR	0x00fa
+#define ATKBD_CMD_SETALL_MB	0x00f8	/* Set all keys to give break codes */
+#define ATKBD_CMD_SETALL_MBR	0x00fa  /* ... and repeat */
 #define ATKBD_CMD_RESET_BAT	0x02ff
 #define ATKBD_CMD_RESEND	0x00fe
 #define ATKBD_CMD_EX_ENABLE	0x10ea
@@ -764,6 +769,11 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra
 		}
 	}
 
+	if (atkbd_terminal) {
+		ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MB);
+		return 3;
+	}
+
 	if (target_set != 3)
 		return 2;
 

From c054a076a1bd4731820a9c4d638b13d5c9bf5935 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Thu, 4 Nov 2010 14:38:39 -0400
Subject: [PATCH 0148/1066] crypto: padlock - Fix AES-CBC handling on
 odd-block-sized input

On certain VIA chipsets AES-CBC requires the input/output to be
a multiple of 64 bytes.  We had a workaround for this but it was
buggy as it sent the whole input for processing when it is meant
to only send the initial number of blocks which makes the rest
a multiple of 64 bytes.

As expected this causes memory corruption whenever the workaround
kicks in.

Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 drivers/crypto/padlock-aes.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index 2e992bc8015b..8a515baa38f7 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -286,7 +286,7 @@ static inline u8 *padlock_xcrypt_cbc(const u8 *input, u8 *output, void *key,
 	if (initial)
 		asm volatile (".byte 0xf3,0x0f,0xa7,0xd0"	/* rep xcryptcbc */
 			      : "+S" (input), "+D" (output), "+a" (iv)
-			      : "d" (control_word), "b" (key), "c" (count));
+			      : "d" (control_word), "b" (key), "c" (initial));
 
 	asm volatile (".byte 0xf3,0x0f,0xa7,0xd0"	/* rep xcryptcbc */
 		      : "+S" (input), "+D" (output), "+a" (iv)

From 1f1b9c9990205759aae31b7734b0ede41a867f32 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Thu, 4 Nov 2010 01:21:39 +0000
Subject: [PATCH 0149/1066] fib: fib_result_assign() should not change fib
 refcounts

After commit ebc0ffae5 (RCU conversion of fib_lookup()),
fib_result_assign()  should not change fib refcounts anymore.

Thanks to Michael who did the bisection and bug report.

Reported-by: Michael Ellerman <michael@ellerman.id.au>
Tested-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/fib_lookup.h | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/net/ipv4/fib_lookup.h b/net/ipv4/fib_lookup.h
index a29edf2219c8..c079cc0ec651 100644
--- a/net/ipv4/fib_lookup.h
+++ b/net/ipv4/fib_lookup.h
@@ -47,11 +47,8 @@ extern int fib_detect_death(struct fib_info *fi, int order,
 static inline void fib_result_assign(struct fib_result *res,
 				     struct fib_info *fi)
 {
-	if (res->fi != NULL)
-		fib_info_put(res->fi);
+	/* we used to play games with refcounts, but we now use RCU */
 	res->fi = fi;
-	if (fi != NULL)
-		atomic_inc(&fi->fib_clntref);
 }
 
 #endif /* _FIB_LOOKUP_H */

From 6b8c92ba07287578718335ce409de8e8d7217e40 Mon Sep 17 00:00:00 2001
From: Nelson Elhage <nelhage@ksplice.com>
Date: Wed, 3 Nov 2010 16:35:40 +0000
Subject: [PATCH 0150/1066] netlink: Make nlmsg_find_attr take a const
 nlmsghdr*.

This will let us use it on a nlmsghdr stored inside a netlink_callback.

Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/netlink.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/net/netlink.h b/include/net/netlink.h
index f3b201d335b3..9801c55de5d6 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -384,7 +384,7 @@ static inline int nlmsg_parse(const struct nlmsghdr *nlh, int hdrlen,
  *
  * Returns the first attribute which matches the specified type.
  */
-static inline struct nlattr *nlmsg_find_attr(struct nlmsghdr *nlh,
+static inline struct nlattr *nlmsg_find_attr(const struct nlmsghdr *nlh,
 					     int hdrlen, int attrtype)
 {
 	return nla_find(nlmsg_attrdata(nlh, hdrlen),

From 22e76c849d505d87c5ecf3d3e6742a65f0ff4860 Mon Sep 17 00:00:00 2001
From: Nelson Elhage <nelhage@ksplice.com>
Date: Wed, 3 Nov 2010 16:35:41 +0000
Subject: [PATCH 0151/1066] inet_diag: Make sure we actually run the same
 bytecode we audited.

We were using nlmsg_find_attr() to look up the bytecode by attribute when
auditing, but then just using the first attribute when actually running
bytecode. So, if we received a message with two attribute elements, where only
the second had type INET_DIAG_REQ_BYTECODE, we would validate and run different
bytecode strings.

Fix this by consistently using nlmsg_find_attr everywhere.

Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Thomas Graf <tgraf@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/inet_diag.c | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index ba8042665849..2ada17129fce 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -490,9 +490,11 @@ static int inet_csk_diag_dump(struct sock *sk,
 {
 	struct inet_diag_req *r = NLMSG_DATA(cb->nlh);
 
-	if (cb->nlh->nlmsg_len > 4 + NLMSG_SPACE(sizeof(*r))) {
+	if (nlmsg_attrlen(cb->nlh, sizeof(*r))) {
 		struct inet_diag_entry entry;
-		struct rtattr *bc = (struct rtattr *)(r + 1);
+		const struct nlattr *bc = nlmsg_find_attr(cb->nlh,
+							  sizeof(*r),
+							  INET_DIAG_REQ_BYTECODE);
 		struct inet_sock *inet = inet_sk(sk);
 
 		entry.family = sk->sk_family;
@@ -512,7 +514,7 @@ static int inet_csk_diag_dump(struct sock *sk,
 		entry.dport = ntohs(inet->inet_dport);
 		entry.userlocks = sk->sk_userlocks;
 
-		if (!inet_diag_bc_run(RTA_DATA(bc), RTA_PAYLOAD(bc), &entry))
+		if (!inet_diag_bc_run(nla_data(bc), nla_len(bc), &entry))
 			return 0;
 	}
 
@@ -527,9 +529,11 @@ static int inet_twsk_diag_dump(struct inet_timewait_sock *tw,
 {
 	struct inet_diag_req *r = NLMSG_DATA(cb->nlh);
 
-	if (cb->nlh->nlmsg_len > 4 + NLMSG_SPACE(sizeof(*r))) {
+	if (nlmsg_attrlen(cb->nlh, sizeof(*r))) {
 		struct inet_diag_entry entry;
-		struct rtattr *bc = (struct rtattr *)(r + 1);
+		const struct nlattr *bc = nlmsg_find_attr(cb->nlh,
+							  sizeof(*r),
+							  INET_DIAG_REQ_BYTECODE);
 
 		entry.family = tw->tw_family;
 #if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
@@ -548,7 +552,7 @@ static int inet_twsk_diag_dump(struct inet_timewait_sock *tw,
 		entry.dport = ntohs(tw->tw_dport);
 		entry.userlocks = 0;
 
-		if (!inet_diag_bc_run(RTA_DATA(bc), RTA_PAYLOAD(bc), &entry))
+		if (!inet_diag_bc_run(nla_data(bc), nla_len(bc), &entry))
 			return 0;
 	}
 
@@ -618,7 +622,7 @@ static int inet_diag_dump_reqs(struct sk_buff *skb, struct sock *sk,
 	struct inet_diag_req *r = NLMSG_DATA(cb->nlh);
 	struct inet_connection_sock *icsk = inet_csk(sk);
 	struct listen_sock *lopt;
-	struct rtattr *bc = NULL;
+	const struct nlattr *bc = NULL;
 	struct inet_sock *inet = inet_sk(sk);
 	int j, s_j;
 	int reqnum, s_reqnum;
@@ -638,8 +642,9 @@ static int inet_diag_dump_reqs(struct sk_buff *skb, struct sock *sk,
 	if (!lopt || !lopt->qlen)
 		goto out;
 
-	if (cb->nlh->nlmsg_len > 4 + NLMSG_SPACE(sizeof(*r))) {
-		bc = (struct rtattr *)(r + 1);
+	if (nlmsg_attrlen(cb->nlh, sizeof(*r))) {
+		bc = nlmsg_find_attr(cb->nlh, sizeof(*r),
+				     INET_DIAG_REQ_BYTECODE);
 		entry.sport = inet->inet_num;
 		entry.userlocks = sk->sk_userlocks;
 	}
@@ -672,8 +677,8 @@ static int inet_diag_dump_reqs(struct sk_buff *skb, struct sock *sk,
 					&ireq->rmt_addr;
 				entry.dport = ntohs(ireq->rmt_port);
 
-				if (!inet_diag_bc_run(RTA_DATA(bc),
-						    RTA_PAYLOAD(bc), &entry))
+				if (!inet_diag_bc_run(nla_data(bc),
+						      nla_len(bc), &entry))
 					continue;
 			}
 

From 6ef933a38ade555a175ecab9d803e6bb73399763 Mon Sep 17 00:00:00 2001
From: Suresh Jayaraman <sjayaraman@suse.de>
Date: Wed, 3 Nov 2010 10:53:49 +0530
Subject: [PATCH 0152/1066] cifs: trivial comment fix: tlink_tree is now a
 rbtree

Noticed while reviewing (late) the rbtree conversion patchset (which has been merged
already).

Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index c9699ce767b6..251a17c03545 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3324,7 +3324,7 @@ tlink_rb_insert(struct rb_root *root, struct tcon_link *new_tlink)
  * If the superblock doesn't refer to a multiuser mount, then just return
  * the master tcon for the mount.
  *
- * First, search the radix tree for an existing tcon for this fsuid. If one
+ * First, search the rbtree for an existing tcon for this fsuid. If one
  * exists, then check to see if it's pending construction. If it is then wait
  * for construction to complete. Once it's no longer pending, check to see if
  * it failed and either return an error or retry construction, depending on

From d38922949d377da7d47473c7868334408ae3b373 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Tue, 2 Nov 2010 16:22:50 -0400
Subject: [PATCH 0153/1066] cifs: dereferencing first then checking

This patch is based on Dan's original patch. His original description is
below:

Smatch complained about a couple checking for NULL after dereferencing
bugs.  I'm not super familiar with the code so I did the conservative
thing and move the dereferences after the checks.

The dereferences in cifs_lock() and cifs_fsync() were added in
ba00ba64cf0 "cifs: make various routines use the cifsFileInfo->tcon
pointer".  The dereference in find_writable_file() was added in
6508d904e6f "cifs: have find_readable/writable_file filter by fsuid".
The comments there say it's possible to trigger the NULL dereference
under stress.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/file.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 71185d1d310a..777e7f42b5b1 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -754,12 +754,6 @@ int cifs_lock(struct file *file, int cmd, struct file_lock *pfLock)
 
 	cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
 	tcon = tlink_tcon(((struct cifsFileInfo *)file->private_data)->tlink);
-
-	if (file->private_data == NULL) {
-		rc = -EBADF;
-		FreeXid(xid);
-		return rc;
-	}
 	netfid = ((struct cifsFileInfo *)file->private_data)->netfid;
 
 	if ((tcon->ses->capabilities & CAP_UNIX) &&
@@ -1154,7 +1148,7 @@ struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *cifs_inode,
 					bool fsuid_only)
 {
 	struct cifsFileInfo *open_file;
-	struct cifs_sb_info *cifs_sb = CIFS_SB(cifs_inode->vfs_inode.i_sb);
+	struct cifs_sb_info *cifs_sb;
 	bool any_available = false;
 	int rc;
 
@@ -1168,6 +1162,8 @@ struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *cifs_inode,
 		return NULL;
 	}
 
+	cifs_sb = CIFS_SB(cifs_inode->vfs_inode.i_sb);
+
 	/* only filter by fsuid on multiuser mounts */
 	if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER))
 		fsuid_only = false;

From 9001d80df9b1db946ef5d0fb52c974d74c567b86 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Sat, 25 Sep 2010 05:50:43 -0500
Subject: [PATCH 0154/1066] usb: musb: gadget: fix dma mode 0 in double buffer
 Rx case

1, In Rx double buffer case, FIFO may have two packets, so
rxstate should be called to unload fifo if RXPKTRDY is set
even the current request has not been completed.

2, Commit 633ba7876b96ec339ef685357e2f7c60b5a8ce85
introduces autoclear to support double buffer in dma mode 0,
so remove clearing RXPKTRDY manually for dma mode 0.

3, Commit c7af6b29ffeffbeb28caf39e5b2ce29b11807c7d may break
dma mode 1 for non-doublebuffer endpoint, fix it.

With this patch, either usbtest #5 or g_file_storage(writing
file to device in usb host) or g_ether have been tested OK in
double buffer case(using fifo mode 3). Also, this patch has
been verified that single buffer case can't be broken.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_gadget.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 5d815049cbaa..ce31f079b31e 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -644,10 +644,8 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 	 */
 
 				csr |= MUSB_RXCSR_DMAENAB;
-				if (!musb_ep->hb_mult &&
-					musb_ep->hw_ep->rx_double_buffered)
-					csr |= MUSB_RXCSR_AUTOCLEAR;
 #ifdef USE_MODE1
+				csr |= MUSB_RXCSR_AUTOCLEAR;
 				/* csr |= MUSB_RXCSR_DMAMODE; */
 
 				/* this special sequence (enabling and then
@@ -656,6 +654,10 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 				 */
 				musb_writew(epio, MUSB_RXCSR,
 					csr | MUSB_RXCSR_DMAMODE);
+#else
+				if (!musb_ep->hb_mult &&
+					musb_ep->hw_ep->rx_double_buffered)
+					csr |= MUSB_RXCSR_AUTOCLEAR;
 #endif
 				musb_writew(epio, MUSB_RXCSR, csr);
 
@@ -807,7 +809,7 @@ void musb_g_rx(struct musb *musb, u8 epnum)
 
 #if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
 		/* Autoclear doesn't clear RxPktRdy for short packets */
-		if ((dma->desired_mode == 0)
+		if ((dma->desired_mode == 0 && !hw_ep->rx_double_buffered)
 				|| (dma->actual_len
 					& (musb_ep->packet_sz - 1))) {
 			/* ack the read! */
@@ -818,8 +820,16 @@ void musb_g_rx(struct musb *musb, u8 epnum)
 		/* incomplete, and not short? wait for next IN packet */
 		if ((request->actual < request->length)
 				&& (musb_ep->dma->actual_len
-					== musb_ep->packet_sz))
+					== musb_ep->packet_sz)) {
+			/* In double buffer case, continue to unload fifo if
+ 			 * there is Rx packet in FIFO.
+ 			 **/
+			csr = musb_readw(epio, MUSB_RXCSR);
+			if ((csr & MUSB_RXCSR_RXPKTRDY) &&
+				hw_ep->rx_double_buffered)
+				goto exit;
 			return;
+		}
 #endif
 		musb_g_giveback(musb_ep, request, 0);
 
@@ -827,7 +837,7 @@ void musb_g_rx(struct musb *musb, u8 epnum)
 		if (!request)
 			return;
 	}
-
+exit:
 	/* Analyze request */
 	rxstate(musb, to_musb_request(request));
 }

From e2c3404523c5366c6cc1099d3237d363254adde0 Mon Sep 17 00:00:00 2001
From: Rahul Ruikar <rahul.ruikar@gmail.com>
Date: Sat, 2 Oct 2010 01:35:48 -0500
Subject: [PATCH 0155/1066] usb: musb: musb_gadget: fix resource leakage in
 error path

In function musb_gadget_setup() call put_device()
when device_register() fails.

Signed-off-by: Rahul Ruikar <rahul.ruikar@gmail.com>
Acked-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_gadget.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index ce31f079b31e..ba22e4a20f95 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1705,8 +1705,10 @@ int __init musb_gadget_setup(struct musb *musb)
 	musb_platform_try_idle(musb, 0);
 
 	status = device_register(&musb->g.dev);
-	if (status != 0)
+	if (status != 0) {
+		put_device(&musb->g.dev);
 		the_gadget = NULL;
+	}
 	return status;
 }
 

From 120d074c58172cd44887d86c9acc44882818c7e7 Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Sun, 10 Oct 2010 13:52:22 -0500
Subject: [PATCH 0156/1066] usb: musb: don't leave PHY enabled on shutdown()

Some actions like musb_platform_exit are only performed on module
removal and not on shutdown, which results in PHY being left enabled
on reboot at least. This is sometimes causing strange failures after
reboot (observed on OMAP3 pandora board), when DEVCTL does not report
VBUS state correctly due to unknown reasons (possibly because of
communication issues between musb IP and PHY). Running
musb_platform_exit before reset seems to resolve that issue.

Move some exit code from musb_remove() to musb_shutdown() so that it
is performed on both module removal and shutdown/reset. Also convert
the host check so that it doesn't need #ifdef.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index c9f9024c5515..2f42a5d50a5a 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1052,6 +1052,12 @@ static void musb_shutdown(struct platform_device *pdev)
 		clk_put(musb->clock);
 	spin_unlock_irqrestore(&musb->lock, flags);
 
+	if (!is_otg_enabled(musb) && is_host_enabled(musb))
+		usb_remove_hcd(musb_to_hcd(musb));
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	musb_platform_exit(musb);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+
 	/* FIXME power down */
 }
 
@@ -2244,13 +2250,6 @@ static int __exit musb_remove(struct platform_device *pdev)
 	 */
 	musb_exit_debugfs(musb);
 	musb_shutdown(pdev);
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-	if (musb->board_mode == MUSB_HOST)
-		usb_remove_hcd(musb_to_hcd(musb));
-#endif
-	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
-	musb_platform_exit(musb);
-	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 
 	musb_free(musb);
 	iounmap(ctrl_base);

From 31c9909b512aa4c97cffc40627c255070fe0bc78 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Tue, 19 Oct 2010 19:08:25 -0500
Subject: [PATCH 0157/1066] USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP
 configuration

Commit 9f445cb29918dc488b7a9a92ef018599cce33df7[USB: musb: disable
double buffering for older RTL versions] tries to disable double
buffer mode by writing endpoint hw max packet size to TXMAP/RXMAP.

First the approach can break full speed and cause overflow problems.
We should always set those registers with the actual max packet size
from endpoint descriptor.

Second, the problem describe by commit 9f445cb29918dc488b7a9a92ef018599cce33df7
was caused by musb gadget driver; nothing to do with RTL revision as
originaly suspected.

The real fix to the problem is to always use actual max packet
size from endpoint descriptor to config TXMAP/RXMAP registers.

Cc: Cliff Cai <cliff.cai@analog.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: stable@kernel.org
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_gadget.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index ba22e4a20f95..f37b8594edeb 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -926,13 +926,9 @@ static int musb_gadget_enable(struct usb_ep *ep,
 		 * likewise high bandwidth periodic tx
 		 */
 		/* Set TXMAXP with the FIFO size of the endpoint
-		 * to disable double buffering mode. Currently, It seems that double
-		 * buffering has problem if musb RTL revision number < 2.0.
+		 * to disable double buffering mode.
 		 */
-		if (musb->hwvers < MUSB_HWVERS_2000)
-			musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
-		else
-			musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
+		musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
 
 		csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
 		if (musb_readw(regs, MUSB_TXCSR)
@@ -968,10 +964,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
 		/* Set RXMAXP with the FIFO size of the endpoint
 		 * to disable double buffering mode.
 		 */
-		if (musb->hwvers < MUSB_HWVERS_2000)
-			musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_rx);
-		else
-			musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
+		musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
 
 		/* force shared fifo to OUT-only mode */
 		if (hw_ep->is_shared_fifo) {

From 5d726f5add3af537952f7c35fdaebab43b718c2d Mon Sep 17 00:00:00 2001
From: Ian Jeffray <ian@jeffray.co.uk>
Date: Sat, 23 Oct 2010 05:11:56 -0500
Subject: [PATCH 0158/1066] USB: musb: blackfin: fix musb_read_txhubport()
 definition

The new MUSB power code needs musb_read_txhubport() to
return a value (so stub it as 0 like the other Blackfin
hub funcs).

Signed-off-by: Ian Jeffray <ian@jeffray.co.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_regs.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 244267527a60..5a727c5b8676 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -633,8 +633,9 @@ static inline u8  musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
 	return 0;
 }
 
-static inline void  musb_read_txhubport(void __iomem *mbase, u8 epnum)
+static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
 {
+	return 0;
 }
 
 #endif /* CONFIG_BLACKFIN */

From 32d5dc9520f0c6f60f691dd478741c774e292406 Mon Sep 17 00:00:00 2001
From: Bob Liu <lliubbo@gmail.com>
Date: Sat, 23 Oct 2010 05:11:58 -0500
Subject: [PATCH 0159/1066] USB: musb: pm: don't rely fully on clock support

Since clock support is optional across processors, don't make the whole
musb pm paths depend upon it.  Just conditionalize the clock accesses.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 2f42a5d50a5a..7efb380f9765 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2410,9 +2410,6 @@ static int musb_suspend(struct device *dev)
 	unsigned long	flags;
 	struct musb	*musb = dev_to_musb(&pdev->dev);
 
-	if (!musb->clock)
-		return 0;
-
 	spin_lock_irqsave(&musb->lock, flags);
 
 	if (is_peripheral_active(musb)) {
@@ -2427,10 +2424,12 @@ static int musb_suspend(struct device *dev)
 
 	musb_save_context(musb);
 
-	if (musb->set_clock)
-		musb->set_clock(musb->clock, 0);
-	else
-		clk_disable(musb->clock);
+	if (musb->clock) {
+		if (musb->set_clock)
+			musb->set_clock(musb->clock, 0);
+		else
+			clk_disable(musb->clock);
+	}
 	spin_unlock_irqrestore(&musb->lock, flags);
 	return 0;
 }
@@ -2440,13 +2439,12 @@ static int musb_resume_noirq(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct musb	*musb = dev_to_musb(&pdev->dev);
 
-	if (!musb->clock)
-		return 0;
-
-	if (musb->set_clock)
-		musb->set_clock(musb->clock, 1);
-	else
-		clk_enable(musb->clock);
+	if (musb->clock) {
+		if (musb->set_clock)
+			musb->set_clock(musb->clock, 1);
+		else
+			clk_enable(musb->clock);
+	}
 
 	musb_restore_context(musb);
 

From 1e393c6eece048052d4131ec4dad3b98e35a98e2 Mon Sep 17 00:00:00 2001
From: Bob Liu <lliubbo@gmail.com>
Date: Sun, 24 Oct 2010 11:10:14 -0500
Subject: [PATCH 0160/1066] USB: musb: blackfin: pm: make it work

Split the USB MMR init steps out into a helper func that both the platform
init and the resume code may call.

Then while suspending, the gpio_vrsel will change from high to low which
will generate a wakeup event and resume the system immediately, so we need
to manually drive it low before we sleep.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/blackfin.c  | 72 ++++++++++++++++++++++++------------
 drivers/usb/musb/musb_core.h |  2 +-
 2 files changed, 50 insertions(+), 24 deletions(-)

diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 611a9d274363..32cc6d927760 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -323,30 +323,8 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
 	return -EIO;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static void musb_platform_reg_init(struct musb *musb)
 {
-
-	/*
-	 * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
-	 * and OTG HOST modes, while rev 1.1 and greater require PE7 to
-	 * be low for DEVICE mode and high for HOST mode. We set it high
-	 * here because we are in host mode
-	 */
-
-	if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
-		printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d \n",
-			musb->config->gpio_vrsel);
-		return -ENODEV;
-	}
-	gpio_direction_output(musb->config->gpio_vrsel, 0);
-
-	usb_nop_xceiv_register();
-	musb->xceiv = otg_get_transceiver();
-	if (!musb->xceiv) {
-		gpio_free(musb->config->gpio_vrsel);
-		return -ENODEV;
-	}
-
 	if (ANOMALY_05000346) {
 		bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
 		SSYNC();
@@ -380,6 +358,33 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 				EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
 				EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
 	SSYNC();
+}
+
+int __init musb_platform_init(struct musb *musb, void *board_data)
+{
+
+	/*
+	 * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
+	 * and OTG HOST modes, while rev 1.1 and greater require PE7 to
+	 * be low for DEVICE mode and high for HOST mode. We set it high
+	 * here because we are in host mode
+	 */
+
+	if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
+		printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d\n",
+			musb->config->gpio_vrsel);
+		return -ENODEV;
+	}
+	gpio_direction_output(musb->config->gpio_vrsel, 0);
+
+	usb_nop_xceiv_register();
+	musb->xceiv = otg_get_transceiver();
+	if (!musb->xceiv) {
+		gpio_free(musb->config->gpio_vrsel);
+		return -ENODEV;
+	}
+
+	musb_platform_reg_init(musb);
 
 	if (is_host_enabled(musb)) {
 		musb->board_set_vbus = bfin_set_vbus;
@@ -394,6 +399,27 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+void musb_platform_save_context(struct musb *musb,
+			struct musb_context_registers *musb_context)
+{
+	if (is_host_active(musb))
+		/*
+		 * During hibernate gpio_vrsel will change from high to low
+		 * low which will generate wakeup event resume the system
+		 * immediately.  Set it to 0 before hibernate to avoid this
+		 * wakeup event.
+		 */
+		gpio_set_value(musb->config->gpio_vrsel, 0);
+}
+
+void musb_platform_restore_context(struct musb *musb,
+			struct musb_context_registers *musb_context)
+{
+	musb_platform_reg_init(musb);
+}
+#endif
+
 int musb_platform_exit(struct musb *musb)
 {
 	gpio_free(musb->config->gpio_vrsel);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 69797e5b46a7..febaabcc2b35 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -487,7 +487,7 @@ struct musb_context_registers {
 };
 
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
-    defined(CONFIG_ARCH_OMAP4)
+    defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_BLACKFIN)
 extern void musb_platform_save_context(struct musb *musb,
 		struct musb_context_registers *musb_context);
 extern void musb_platform_restore_context(struct musb *musb,

From 68f64714dc35a515a3064b300729e7809bcdd0e0 Mon Sep 17 00:00:00 2001
From: Bob Liu <lliubbo@gmail.com>
Date: Sat, 23 Oct 2010 05:12:00 -0500
Subject: [PATCH 0161/1066] USB: musb: blackfin: fix dynamic device<->host
 changing

We need to restart the timer in order to recognize USB devices in
host-only mode.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/blackfin.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 32cc6d927760..ade45a219c47 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -171,8 +171,9 @@ static irqreturn_t blackfin_interrupt(int irq, void *__hci)
 	}
 
 	/* Start sampling ID pin, when plug is removed from MUSB */
-	if (is_otg_enabled(musb) && (musb->xceiv->state == OTG_STATE_B_IDLE
-		|| musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
+	if ((is_otg_enabled(musb) && (musb->xceiv->state == OTG_STATE_B_IDLE
+		|| musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) ||
+		(musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) {
 		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
 		musb->a_wait_bcon = TIMER_DELAY;
 	}

From 9c7564620f82e55a9c8713311bffd401ec9d60fe Mon Sep 17 00:00:00 2001
From: Bob Liu <lliubbo@gmail.com>
Date: Sat, 23 Oct 2010 05:12:01 -0500
Subject: [PATCH 0162/1066] USB: musb: blackfin: push clkin value to platform
 resources

In order to not touch the driver file for different xtal usage,
push the clkin value to board file and calculate the register
value instead of hardcoding it.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/blackfin.c | 3 ++-
 include/linux/usb/musb.h    | 2 ++
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index ade45a219c47..fcb5206a65bd 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -337,7 +337,8 @@ static void musb_platform_reg_init(struct musb *musb)
 	}
 
 	/* Configure PLL oscillator register */
-	bfin_write_USB_PLLOSC_CTRL(0x30a8);
+	bfin_write_USB_PLLOSC_CTRL(0x3080 |
+			((480/musb->config->clkin) << 1));
 	SSYNC();
 
 	bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1);
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index ee2dd1d506ed..2387f9fc8138 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -89,6 +89,8 @@ struct musb_hdrc_config {
 	/* A GPIO controlling VRSEL in Blackfin */
 	unsigned int	gpio_vrsel;
 	unsigned int	gpio_vrsel_active;
+	/* musb CLKIN in Blackfin in MHZ */
+	unsigned char   clkin;
 #endif
 
 };

From b212091474a5f967979e62c5c24687ee4d0342d9 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Wed, 27 Oct 2010 09:42:32 -0500
Subject: [PATCH 0163/1066] usb: musb: fix kernel oops when loading musb_hdrc
 module for the 2nd time

musb driver still may write MUSB_DEVCTL register after clock is disabled
in musb_platform_exit, which may cause the kernel oops[1] when musb_hdrc
module is loaded for the 2nd time.

The patch fixes the kernel oops in this case.

[1] kernel oops when loading musb_hdrc module for the 2nd time

[   93.380279] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=5
[   93.387847] bus: 'platform': add driver musb_hdrc
[   93.388153] bus: 'platform': driver_probe_device: matched device musb_hdrc with driver musb_hdrc
[   93.388183] bus: 'platform': really_probe: probing driver musb_hdrc with device musb_hdrc
[   93.405090] HS USB OTG: revision 0x33, sysconfig 0x2010, sysstatus 0x1, intrfsel 0x1, simenable  0x0
[   93.405364] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[   93.405395] musb_hdrc: MHDRC RTL version 1.400
[   93.405426] musb_hdrc: setup fifo_mode 3
[   93.405456] musb_hdrc: 7/31 max ep, 3648/16384 memory
[   93.405487] musb_core_init 1524: musb_hdrc: hw_ep 0shared, max 64
[   93.405487] musb_core_init 1524: musb_hdrc: hw_ep 1tx, doublebuffer, max 512
[   93.405517] musb_core_init 1533: musb_hdrc: hw_ep 1rx, doublebuffer, max 512
[   93.405548] musb_core_init 1524: musb_hdrc: hw_ep 2tx, max 512
[   93.405578] musb_core_init 1533: musb_hdrc: hw_ep 2rx, max 512
[   93.405578] musb_core_init 1524: musb_hdrc: hw_ep 3shared, max 256
[   93.405609] musb_core_init 1524: musb_hdrc: hw_ep 4shared, max 256
[   93.405853] musb_platform_try_idle 133: b_idle inactive, for idle timer for 7 ms
[   93.405944] device: 'gadget': device_add
[   93.406921] PM: Adding info for No Bus:gadget
[   93.406951] musb_init_controller 2136: OTG mode, status 0, dev80
[   93.407379] musb_do_idle 51: musb_do_idle: state=1
[   93.408233] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[   93.416656] driver: 'musb_hdrc': driver_bound: bound to device 'musb_hdrc'
[   93.416687] bus: 'platform': really_probe: bound device musb_hdrc to driver musb_hdrc
[  124.486938] bus: 'platform': remove driver musb_hdrc
[  124.490509] twl4030_usb twl4030_usb: twl4030_phy_suspend
[  124.491424] device: 'gadget': device_unregister
[  124.491424] PM: Removing info for No Bus:gadget
[  124.495269]  gadget: musb_gadget_release
[  124.498992] driver: 'musb_hdrc': driver_release
[  129.569366] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=5
[  129.576934] bus: 'platform': add driver musb_hdrc
[  129.577209] bus: 'platform': driver_probe_device: matched device musb_hdrc with driver musb_hdrc
[  129.577239] bus: 'platform': really_probe: probing driver musb_hdrc with device musb_hdrc
[  129.592651] twl4030_usb twl4030_usb: twl4030_phy_resume
[  129.592681] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab404
[  129.600830] Internal error: : 1028 [#1]
[  129.604858] last sysfs file: /sys/devices/platform/i2c_omap.3/i2c-3/i2c-dev/i2c-3/dev
[  129.613067] Modules linked in: musb_hdrc(+) [last unloaded: musb_hdrc]
[  129.619964] CPU: 0    Not tainted  (2.6.36-next-20101021+ #372)
[  129.626281] PC is at musb_platform_init+0xb0/0x1c8 [musb_hdrc]
[  129.632415] LR is at mark_held_locks+0x64/0x94
[  129.637084] pc : [<bf032198>]    lr : [<c00ad7c4>]    psr: 20000013
[  129.637084] sp : c6d5fcb0  ip : c6d5fc38  fp : c6d5fcd4
[  129.649139] r10: c6e72180  r9 : fa0ab000  r8 : c05612e8
[  129.654602] r7 : 0000005c  r6 : c0559cc8  r5 : c6e72180  r4 : c0561548
[  129.661468] r3 : 04d60047  r2 : fa0ab000  r1 : c07169d8  r0 : 00000000
[  129.668304] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[  129.675811] Control: 10c5387d  Table: 86e4c019  DAC: 00000015
[  129.681823] Process insmod (pid: 554, stack limit = 0xc6d5e2f0)
[  129.688049] Stack: (0xc6d5fcb0 to 0xc6d60000)
[  129.692626] fca0:                                     fa0ab000 c0555c54 c6d5fcd4 c0561548
[  129.701202] fcc0: 00000003 c05612e0 c6d5fe04 c6d5fcd8 bf03140c bf0320f4 c6d5fd9c c6d5fce8
[  129.709808] fce0: c015cb94 c041448c c06d9d10 ffffffff c6d5fd14 c6d5fd00 c00adbec c6d5fd40
[  129.718383] fd00: c015d478 c6d5fdb0 c6d5fd24 c00a9d18 c6d5e000 60000013 bf02a4ac c05612bc
[  129.726989] fd20: c0414fb4 c00a9cf0 c6d5fd54 c6d5fd38 c015bbdc c0244280 c6e8b7b0 c7929330
[  129.735565] fd40: c6d5fdb0 c6d5fdb0 c6d5fd7c c6e7227c c015c010 c015bb90 c015c2ac c6d5fdb0
[  129.744171] fd60: c7929330 c6d5fdb0 c7929330 c6e8b7b0 c6d5fd9c 00000000 c7929330 c6e8b7b0
[  129.752746] fd80: c6d5fdb0 00000000 00000001 00000000 c6d5fde4 c6d5fda0 c015d478 c015cb74
[  129.761322] fda0: c056138c 00000000 c6d5fdcc c6d5fdb8 c7929330 00000000 c056138c c05612e8
[  129.769927] fdc0: 00000000 c05612f0 c0c5d62c c06f6e00 c73217c0 00000000 c6d5fdf4 c05612e8
[  129.778503] fde0: c05612e8 bf02a2e4 c0c5d62c c06f6e00 c73217c0 00000000 c6d5fe14 c6d5fe08
[  129.787109] fe00: c029a398 bf0311c8 c6d5fe4c c6d5fe18 c0299120 c029a384 c7919140 22222222
[  129.795684] fe20: c6d5fe4c c05612e8 c056131c bf02a2e4 c0299278 c06f6e00 c73217c0 00000000
[  129.804290] fe40: c6d5fe6c c6d5fe50 c0299314 c0299020 00000000 c6d5fe70 bf02a2e4 c0299278
[  129.812866] fe60: c6d5fe94 c6d5fe70 c02987d4 c0299284 c7825060 c78c6618 00000000 bf02a2e4
[  129.821441] fe80: c06e4c98 00000000 c6d5fea4 c6d5fe98 c0298ea4 c0298778 c6d5fedc c6d5fea8
[  129.830047] fea0: c0297f84 c0298e8c bf02716c 000b9008 bf02a2e4 bf02a2d0 000b9008 bf02a2e4
[  129.838623] fec0: 00000000 c06f6e00 bf031000 00000000 c6d5fefc c6d5fee0 c0299614 c0297ec0
[  129.847229] fee0: bf02a2d0 000b9008 bf02a388 00000000 c6d5ff0c c6d5ff00 c029a868 c02995a8
[  129.855804] ff00: c6d5ff24 c6d5ff10 c029a88c c029a818 0010281c 000b9008 c6d5ff34 c6d5ff28
[  129.864410] ff20: bf03104c c029a878 c6d5ff7c c6d5ff38 c00463dc bf03100c 00000000 00000000
[  129.872985] ff40: 00000000 0010281c 000b9008 bf02a388 00000000 0010281c 000b9008 bf02a388
[  129.881591] ff60: 00000000 c00521c8 c6d5e000 00000000 c6d5ffa4 c6d5ff80 c00bb9b8 c00463ac
[  129.890167] ff80: c00adc88 c00ada68 00097e8e bebbfcf4 0010281c 00000080 00000000 c6d5ffa8
[  129.898742] ffa0: c0052000 c00bb908 00097e8e bebbfcf4 402c9008 0010281c 000b9008 bebbfe5a
[  129.907348] ffc0: 00097e8e bebbfcf4 0010281c 00000080 00000014 bebbfcf4 bebbfe06 0000005b
[  129.915924] ffe0: bebbf9a0 bebbf990 0001a108 40263ec0 60000010 402c9008 011b0000 0000007c
[  129.924499] Backtrace:
[  129.927185] [<bf0320e8>] (musb_platform_init+0x0/0x1c8 [musb_hdrc]) from [<bf03140c>] (musb_probe+0x250/0xf2c [musb_hdrc])
[  129.938781]  r6:c05612e0 r5:00000003 r4:c0561548
[  129.943695] [<bf0311bc>] (musb_probe+0x0/0xf2c [musb_hdrc]) from [<c029a398>] (platform_drv_probe+0x20/0x24)
[  129.954040] [<c029a378>] (platform_drv_probe+0x0/0x24) from [<c0299120>] (driver_probe_device+0x10c/0x264)
[  129.964172] [<c0299014>] (driver_probe_device+0x0/0x264) from [<c0299314>] (__driver_attach+0x9c/0xa0)
[  129.973968] [<c0299278>] (__driver_attach+0x0/0xa0) from [<c02987d4>] (bus_for_each_dev+0x68/0x94)
[  129.983367]  r7:c0299278 r6:bf02a2e4 r5:c6d5fe70 r4:00000000
[  129.989349] [<c029876c>] (bus_for_each_dev+0x0/0x94) from [<c0298ea4>] (driver_attach+0x24/0x28)
[  129.998565]  r7:00000000 r6:c06e4c98 r5:bf02a2e4 r4:00000000
[  130.004547] [<c0298e80>] (driver_attach+0x0/0x28) from [<c0297f84>] (bus_add_driver+0xd0/0x274)
[  130.013671] [<c0297eb4>] (bus_add_driver+0x0/0x274) from [<c0299614>] (driver_register+0x78/0x158)
[  130.023101] [<c029959c>] (driver_register+0x0/0x158) from [<c029a868>] (platform_driver_register+0x5c/0x60)
[  130.033325]  r7:00000000 r6:bf02a388 r5:000b9008 r4:bf02a2d0
[  130.039276] [<c029a80c>] (platform_driver_register+0x0/0x60) from [<c029a88c>] (platform_driver_probe+0x20/0xa8)
[  130.050018] [<c029a86c>] (platform_driver_probe+0x0/0xa8) from [<bf03104c>] (musb_init+0x4c/0x54 [musb_hdrc])
[  130.060424]  r5:000b9008 r4:0010281c
[  130.064239] [<bf031000>] (musb_init+0x0/0x54 [musb_hdrc]) from [<c00463dc>] (do_one_initcall+0x3c/0x1c0)
[  130.074218] [<c00463a0>] (do_one_initcall+0x0/0x1c0) from [<c00bb9b8>] (sys_init_module+0xbc/0x1d0)
[  130.083709] [<c00bb8fc>] (sys_init_module+0x0/0x1d0) from [<c0052000>] (ret_fast_syscall+0x0/0x3c)
[  130.093109]  r7:00000080 r6:0010281c r5:bebbfcf4 r4:00097e8e
[  130.099090] Code: 0a000046 e3a01001 e12fff33 e59520e4 (e5923404)
[  130.105621] ---[ end trace 1d0bd69deb79164d ]---

Cc: Ajay Kumar Gupta <ajay.gupta@ti.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: stable@kernel.org
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 7efb380f9765..78277170275b 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1056,7 +1056,6 @@ static void musb_shutdown(struct platform_device *pdev)
 		usb_remove_hcd(musb_to_hcd(musb));
 	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 	musb_platform_exit(musb);
-	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 
 	/* FIXME power down */
 }

From 19aab56c7f68a577d638a98c019b89420943ee70 Mon Sep 17 00:00:00 2001
From: Heikki Krogerus <heikki.krogerus@nokia.com>
Date: Fri, 29 Oct 2010 04:23:27 -0500
Subject: [PATCH 0164/1066] usb: musb: Fix handling of spurious SESSREQ

Rely on VBUS being valid on top off B device.

Signed-off-by: Heikki Krogerus <heikki.krogerus@nokia.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 78277170275b..e6669fc3b804 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -552,7 +552,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 	if (int_usb & MUSB_INTR_SESSREQ) {
 		void __iomem *mbase = musb->mregs;
 
-		if (devctl & MUSB_DEVCTL_BDEVICE) {
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS
+				&& (devctl & MUSB_DEVCTL_BDEVICE)) {
 			DBG(3, "SessReq while on B state\n");
 			return IRQ_HANDLED;
 		}

From add330ec29cb00b26cf45ffb4773bb9094a48368 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Nov 2010 17:05:40 +0100
Subject: [PATCH 0165/1066] ASoC i.MX eukrea tlv320: Fix for multicomponent

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/imx/eukrea-tlv320.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/soc/imx/eukrea-tlv320.c b/sound/soc/imx/eukrea-tlv320.c
index b59675257ce5..dd4fffdbd177 100644
--- a/sound/soc/imx/eukrea-tlv320.c
+++ b/sound/soc/imx/eukrea-tlv320.c
@@ -34,8 +34,8 @@ static int eukrea_tlv320_hw_params(struct snd_pcm_substream *substream,
 			    struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
 	int ret;
 
 	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
@@ -79,10 +79,10 @@ static struct snd_soc_ops eukrea_tlv320_snd_ops = {
 static struct snd_soc_dai_link eukrea_tlv320_dai = {
 	.name		= "tlv320aic23",
 	.stream_name	= "TLV320AIC23",
-	.codec_dai	= "tlv320aic23-hifi",
+	.codec_dai_name	= "tlv320aic23-hifi",
 	.platform_name	= "imx-pcm-audio.0",
 	.codec_name	= "tlv320aic23-codec.0-001a",
-	.cpu_dai = "imx-ssi.0",
+	.cpu_dai_name	= "imx-ssi.0",
 	.ops		= &eukrea_tlv320_snd_ops,
 };
 

From bf0199b7a5085e8d1908d2b0a9c530ed8d142fb8 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Nov 2010 17:05:41 +0100
Subject: [PATCH 0166/1066] ASoC i.MX phycore ac97: remove unnecessary includes

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/imx/phycore-ac97.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/sound/soc/imx/phycore-ac97.c b/sound/soc/imx/phycore-ac97.c
index 6a65dd705519..cf46a17d6925 100644
--- a/sound/soc/imx/phycore-ac97.c
+++ b/sound/soc/imx/phycore-ac97.c
@@ -20,9 +20,6 @@
 #include <sound/soc-dapm.h>
 #include <asm/mach-types.h>
 
-#include "../codecs/wm9712.h"
-#include "imx-ssi.h"
-
 static struct snd_soc_card imx_phycore;
 
 static struct snd_soc_ops imx_phycore_hifi_ops = {

From f562be51fe9021c913e661c46681cb5bae70f369 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Nov 2010 17:05:42 +0100
Subject: [PATCH 0167/1066] ASoC i.MX: register dma audio device

We have two different transfer methods on i.MX: FIQ and DMA. Since
the merge of the ASoC multicomponent support the DMA device is lost.
Add it again. Also, imx_ssi_dai_probe has to be called for !AC97
aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/imx/imx-ssi.c | 44 +++++++++++++++++++++++++++--------------
 sound/soc/imx/imx-ssi.h |  1 +
 2 files changed, 30 insertions(+), 15 deletions(-)

diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c
index d4bd345b0a8d..d2d98c75ee8a 100644
--- a/sound/soc/imx/imx-ssi.c
+++ b/sound/soc/imx/imx-ssi.c
@@ -439,7 +439,22 @@ void imx_pcm_free(struct snd_pcm *pcm)
 }
 EXPORT_SYMBOL_GPL(imx_pcm_free);
 
+static int imx_ssi_dai_probe(struct snd_soc_dai *dai)
+{
+	struct imx_ssi *ssi = dev_get_drvdata(dai->dev);
+	uint32_t val;
+
+	snd_soc_dai_set_drvdata(dai, ssi);
+
+	val = SSI_SFCSR_TFWM0(ssi->dma_params_tx.burstsize) |
+		SSI_SFCSR_RFWM0(ssi->dma_params_rx.burstsize);
+	writel(val, ssi->base + SSI_SFCSR);
+
+	return 0;
+}
+
 static struct snd_soc_dai_driver imx_ssi_dai = {
+	.probe = imx_ssi_dai_probe,
 	.playback = {
 		.channels_min = 2,
 		.channels_max = 2,
@@ -455,20 +470,6 @@ static struct snd_soc_dai_driver imx_ssi_dai = {
 	.ops = &imx_ssi_pcm_dai_ops,
 };
 
-static int imx_ssi_dai_probe(struct snd_soc_dai *dai)
-{
-	struct imx_ssi *ssi = dev_get_drvdata(dai->dev);
-	uint32_t val;
-
-	snd_soc_dai_set_drvdata(dai, ssi);
-
-	val = SSI_SFCSR_TFWM0(ssi->dma_params_tx.burstsize) |
-		SSI_SFCSR_RFWM0(ssi->dma_params_rx.burstsize);
-	writel(val, ssi->base + SSI_SFCSR);
-
-	return 0;
-}
-
 static struct snd_soc_dai_driver imx_ac97_dai = {
 	.probe = imx_ssi_dai_probe,
 	.ac97_control = 1,
@@ -677,7 +678,17 @@ static int imx_ssi_probe(struct platform_device *pdev)
 		goto failed_register;
 	}
 
-	ssi->soc_platform_pdev = platform_device_alloc("imx-fiq-pcm-audio", pdev->id);
+	ssi->soc_platform_pdev_fiq = platform_device_alloc("imx-fiq-pcm-audio", pdev->id);
+	if (!ssi->soc_platform_pdev_fiq)
+		goto failed_pdev_fiq_alloc;
+	platform_set_drvdata(ssi->soc_platform_pdev_fiq, ssi);
+	ret = platform_device_add(ssi->soc_platform_pdev_fiq);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform device\n");
+		goto failed_pdev_fiq_add;
+	}
+
+	ssi->soc_platform_pdev = platform_device_alloc("imx-pcm-audio", pdev->id);
 	if (!ssi->soc_platform_pdev)
 		goto failed_pdev_alloc;
 	platform_set_drvdata(ssi->soc_platform_pdev, ssi);
@@ -692,6 +703,9 @@ static int imx_ssi_probe(struct platform_device *pdev)
 failed_pdev_add:
 	platform_device_put(ssi->soc_platform_pdev);
 failed_pdev_alloc:
+failed_pdev_fiq_add:
+	platform_device_put(ssi->soc_platform_pdev_fiq);
+failed_pdev_fiq_alloc:
 	snd_soc_unregister_dai(&pdev->dev);
 failed_register:
 failed_ac97:
diff --git a/sound/soc/imx/imx-ssi.h b/sound/soc/imx/imx-ssi.h
index 53b780d9b2b0..4fc17da11866 100644
--- a/sound/soc/imx/imx-ssi.h
+++ b/sound/soc/imx/imx-ssi.h
@@ -212,6 +212,7 @@ struct imx_ssi {
 	int enabled;
 
 	struct platform_device *soc_platform_pdev;
+	struct platform_device *soc_platform_pdev_fiq;
 };
 
 struct snd_soc_platform *imx_ssi_fiq_init(struct platform_device *pdev,

From bf974a0d77a318a733a47c18a47fa6ff8960c361 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Nov 2010 17:05:43 +0100
Subject: [PATCH 0168/1066] ASoC i.MX: switch to new DMA api

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/imx/imx-pcm-dma-mx2.c | 233 ++++++++++++++------------------
 sound/soc/imx/imx-ssi.h         |   3 +
 2 files changed, 107 insertions(+), 129 deletions(-)

diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index fd493ee1428e..671ef8dd524c 100644
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/dmaengine.h>
 
 #include <sound/core.h>
 #include <sound/initval.h>
@@ -27,165 +28,146 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 
-#include <mach/dma-mx1-mx2.h>
+#include <mach/dma.h>
 
 #include "imx-ssi.h"
 
 struct imx_pcm_runtime_data {
-	int sg_count;
-	struct scatterlist *sg_list;
-	int period;
+	int period_bytes;
 	int periods;
-	unsigned long dma_addr;
 	int dma;
-	struct snd_pcm_substream *substream;
 	unsigned long offset;
 	unsigned long size;
-	unsigned long period_cnt;
 	void *buf;
 	int period_time;
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *dma_chan;
+	struct imx_dma_data dma_data;
 };
 
-/* Called by the DMA framework when a period has elapsed */
-static void imx_ssi_dma_progression(int channel, void *data,
-					struct scatterlist *sg)
+static void audio_dma_irq(void *data)
 {
-	struct snd_pcm_substream *substream = data;
+	struct snd_pcm_substream *substream = (struct snd_pcm_substream *)data;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
 
-	if (!sg)
-		return;
+	iprtd->offset += iprtd->period_bytes;
+	iprtd->offset %= iprtd->period_bytes * iprtd->periods;
 
-	runtime = iprtd->substream->runtime;
-
-	iprtd->offset = sg->dma_address - runtime->dma_addr;
-
-	snd_pcm_period_elapsed(iprtd->substream);
+	snd_pcm_period_elapsed(substream);
 }
 
-static void imx_ssi_dma_callback(int channel, void *data)
+static bool filter(struct dma_chan *chan, void *param)
 {
-	pr_err("%s shouldn't be called\n", __func__);
+	struct imx_pcm_runtime_data *iprtd = param;
+
+	if (!imx_dma_is_general_purpose(chan))
+		return false;
+
+        chan->private = &iprtd->dma_data;
+
+        return true;
 }
 
-static void snd_imx_dma_err_callback(int channel, void *data, int err)
-{
-	struct snd_pcm_substream *substream = data;
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct imx_pcm_dma_params *dma_params = 
-		snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
-	int ret;
-
-	pr_err("DMA timeout on channel %d -%s%s%s%s\n",
-		 channel,
-		 err & IMX_DMA_ERR_BURST ?    " burst" : "",
-		 err & IMX_DMA_ERR_REQUEST ?  " request" : "",
-		 err & IMX_DMA_ERR_TRANSFER ? " transfer" : "",
-		 err & IMX_DMA_ERR_BUFFER ?   " buffer" : "");
-
-	imx_dma_disable(iprtd->dma);
-	ret = imx_dma_setup_sg(iprtd->dma, iprtd->sg_list, iprtd->sg_count,
-			IMX_DMA_LENGTH_LOOP, dma_params->dma_addr,
-			substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
-			DMA_MODE_WRITE : DMA_MODE_READ);
-	if (!ret)
-		imx_dma_enable(iprtd->dma);
-}
-
-static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream)
+static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct imx_pcm_dma_params *dma_params;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+	struct dma_slave_config slave_config;
+	dma_cap_mask_t mask;
+	enum dma_slave_buswidth buswidth;
 	int ret;
 
 	dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
 
-	iprtd->dma = imx_dma_request_by_prio(DRV_NAME, DMA_PRIO_HIGH);
-	if (iprtd->dma < 0) {
-		pr_err("Failed to claim the audio DMA\n");
-		return -ENODEV;
+	iprtd->dma_data.peripheral_type = IMX_DMATYPE_SSI;
+	iprtd->dma_data.priority = DMA_PRIO_HIGH;
+	iprtd->dma_data.dma_request = dma_params->dma;
+
+	/* Try to grab a DMA channel */
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	iprtd->dma_chan = dma_request_channel(mask, filter, iprtd);
+	if (!iprtd->dma_chan)
+		return -EINVAL;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+	case SNDRV_PCM_FORMAT_S24_LE:
+		buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+		break;
+	default:
+		return 0;
 	}
 
-	ret = imx_dma_setup_handlers(iprtd->dma,
-				imx_ssi_dma_callback,
-				snd_imx_dma_err_callback, substream);
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		slave_config.direction = DMA_TO_DEVICE;
+		slave_config.dst_addr = dma_params->dma_addr;
+		slave_config.dst_addr_width = buswidth;
+		slave_config.dst_maxburst = dma_params->burstsize;
+	} else {
+		slave_config.direction = DMA_FROM_DEVICE;
+		slave_config.src_addr = dma_params->dma_addr;
+		slave_config.src_addr_width = buswidth;
+		slave_config.src_maxburst = dma_params->burstsize;
+	}
+
+	ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config);
 	if (ret)
-		goto out;
-
-	ret = imx_dma_setup_progression_handler(iprtd->dma,
-			imx_ssi_dma_progression);
-	if (ret) {
-		pr_err("Failed to setup the DMA handler\n");
-		goto out;
-	}
-
-	ret = imx_dma_config_channel(iprtd->dma,
-			IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
-			IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
-			dma_params->dma, 1);
-	if (ret < 0) {
-		pr_err("Cannot configure DMA channel: %d\n", ret);
-		goto out;
-	}
-
-	imx_dma_config_burstlen(iprtd->dma, dma_params->burstsize * 2);
+		return ret;
 
 	return 0;
-out:
-	imx_dma_free(iprtd->dma);
-	return ret;
 }
 
 static int snd_imx_pcm_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params)
 {
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
-	int i;
 	unsigned long dma_addr;
+	struct dma_chan *chan;
+	struct imx_pcm_dma_params *dma_params;
+	int ret;
 
-	imx_ssi_dma_alloc(substream);
+	dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	ret = imx_ssi_dma_alloc(substream, params);
+	if (ret)
+		return ret;
+	chan = iprtd->dma_chan;
 
 	iprtd->size = params_buffer_bytes(params);
 	iprtd->periods = params_periods(params);
-	iprtd->period = params_period_bytes(params);
+	iprtd->period_bytes = params_period_bytes(params);
 	iprtd->offset = 0;
 	iprtd->period_time = HZ / (params_rate(params) /
 			params_period_size(params));
 
 	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
 
-	if (iprtd->sg_count != iprtd->periods) {
-		kfree(iprtd->sg_list);
-
-		iprtd->sg_list = kcalloc(iprtd->periods + 1,
-				sizeof(struct scatterlist), GFP_KERNEL);
-		if (!iprtd->sg_list)
-			return -ENOMEM;
-		iprtd->sg_count = iprtd->periods + 1;
-	}
-
-	sg_init_table(iprtd->sg_list, iprtd->sg_count);
 	dma_addr = runtime->dma_addr;
 
-	for (i = 0; i < iprtd->periods; i++) {
-		iprtd->sg_list[i].page_link = 0;
-		iprtd->sg_list[i].offset = 0;
-		iprtd->sg_list[i].dma_address = dma_addr;
-		iprtd->sg_list[i].length = iprtd->period;
-		dma_addr += iprtd->period;
+	iprtd->buf = (unsigned int *)substream->dma_buffer.area;
+
+	iprtd->desc = chan->device->device_prep_dma_cyclic(chan, dma_addr,
+			iprtd->period_bytes * iprtd->periods,
+			iprtd->period_bytes,
+			substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+			DMA_TO_DEVICE : DMA_FROM_DEVICE);
+	if (!iprtd->desc) {
+		dev_err(&chan->dev->device, "cannot prepare slave dma\n");
+		return -EINVAL;
 	}
 
-	/* close the loop */
-	iprtd->sg_list[iprtd->sg_count - 1].offset = 0;
-	iprtd->sg_list[iprtd->sg_count - 1].length = 0;
-	iprtd->sg_list[iprtd->sg_count - 1].page_link =
-			((unsigned long) iprtd->sg_list | 0x01) & ~0x02;
+	iprtd->desc->callback = audio_dma_irq;
+	iprtd->desc->callback_param = substream;
+
 	return 0;
 }
 
@@ -194,41 +176,21 @@ static int snd_imx_pcm_hw_free(struct snd_pcm_substream *substream)
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
 
-	if (iprtd->dma >= 0) {
-		imx_dma_free(iprtd->dma);
-		iprtd->dma = -EINVAL;
+	if (iprtd->dma_chan) {
+		dma_release_channel(iprtd->dma_chan);
+		iprtd->dma_chan = NULL;
 	}
 
-	kfree(iprtd->sg_list);
-	iprtd->sg_list = NULL;
-
 	return 0;
 }
 
 static int snd_imx_pcm_prepare(struct snd_pcm_substream *substream)
 {
-	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct imx_pcm_dma_params *dma_params;
-	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
-	int err;
 
 	dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
 
-	iprtd->substream = substream;
-	iprtd->buf = (unsigned int *)substream->dma_buffer.area;
-	iprtd->period_cnt = 0;
-
-	pr_debug("%s: buf: %p period: %d periods: %d\n",
-			__func__, iprtd->buf, iprtd->period, iprtd->periods);
-
-	err = imx_dma_setup_sg(iprtd->dma, iprtd->sg_list, iprtd->sg_count,
-			IMX_DMA_LENGTH_LOOP, dma_params->dma_addr,
-			substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
-			DMA_MODE_WRITE : DMA_MODE_READ);
-	if (err)
-		return err;
-
 	return 0;
 }
 
@@ -241,14 +203,14 @@ static int snd_imx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		imx_dma_enable(iprtd->dma);
+		dmaengine_submit(iprtd->desc);
 
 		break;
 
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		imx_dma_disable(iprtd->dma);
+		dmaengine_terminate_all(iprtd->dma_chan);
 
 		break;
 	default:
@@ -263,6 +225,9 @@ static snd_pcm_uframes_t snd_imx_pcm_pointer(struct snd_pcm_substream *substream
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
 
+	pr_debug("%s: %ld %ld\n", __func__, iprtd->offset,
+			bytes_to_frames(substream->runtime, iprtd->offset));
+
 	return bytes_to_frames(substream->runtime, iprtd->offset);
 }
 
@@ -279,7 +244,7 @@ static struct snd_pcm_hardware snd_imx_hardware = {
 	.channels_max = 2,
 	.buffer_bytes_max = IMX_SSI_DMABUF_SIZE,
 	.period_bytes_min = 128,
-	.period_bytes_max = 16 * 1024,
+	.period_bytes_max = 65535, /* Limited by SDMA engine */
 	.periods_min = 2,
 	.periods_max = 255,
 	.fifo_size = 0,
@@ -304,11 +269,23 @@ static int snd_imx_open(struct snd_pcm_substream *substream)
 	}
 
 	snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware);
+
+	return 0;
+}
+
+static int snd_imx_close(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+
+	kfree(iprtd);
+
 	return 0;
 }
 
 static struct snd_pcm_ops imx_pcm_ops = {
 	.open		= snd_imx_open,
+	.close		= snd_imx_close,
 	.ioctl		= snd_pcm_lib_ioctl,
 	.hw_params	= snd_imx_pcm_hw_params,
 	.hw_free	= snd_imx_pcm_hw_free,
@@ -340,7 +317,6 @@ static struct platform_driver imx_pcm_driver = {
 			.name = "imx-pcm-audio",
 			.owner = THIS_MODULE,
 	},
-
 	.probe = imx_soc_platform_probe,
 	.remove = __devexit_p(imx_soc_platform_remove),
 };
@@ -356,4 +332,3 @@ static void __exit snd_imx_pcm_exit(void)
 	platform_driver_unregister(&imx_pcm_driver);
 }
 module_exit(snd_imx_pcm_exit);
-
diff --git a/sound/soc/imx/imx-ssi.h b/sound/soc/imx/imx-ssi.h
index 4fc17da11866..a4406a134892 100644
--- a/sound/soc/imx/imx-ssi.h
+++ b/sound/soc/imx/imx-ssi.h
@@ -185,6 +185,9 @@
 
 #define DRV_NAME "imx-ssi"
 
+#include <linux/dmaengine.h>
+#include <mach/dma.h>
+
 struct imx_pcm_dma_params {
 	int dma;
 	unsigned long dma_addr;

From 6424dca23e6b5a2f7a19a69cf7c0990b11717b00 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Nov 2010 17:05:44 +0100
Subject: [PATCH 0169/1066] phycore-ac97: add ac97 to cardname

We have different codecs on the pcm038 (ac97 wm9712 and mc13783).
To make alsactl restore work correctly these should have different
names.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/imx/phycore-ac97.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/imx/phycore-ac97.c b/sound/soc/imx/phycore-ac97.c
index cf46a17d6925..39f23734781a 100644
--- a/sound/soc/imx/phycore-ac97.c
+++ b/sound/soc/imx/phycore-ac97.c
@@ -38,7 +38,7 @@ static struct snd_soc_dai_link imx_phycore_dai_ac97[] = {
 };
 
 static struct snd_soc_card imx_phycore = {
-	.name		= "PhyCORE-audio",
+	.name		= "PhyCORE-ac97-audio",
 	.dai_link	= imx_phycore_dai_ac97,
 	.num_links	= ARRAY_SIZE(imx_phycore_dai_ac97),
 };

From 96fd7ce58ffb5c7bf376796b5525ba3ea1c9d69f Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Thu, 4 Nov 2010 11:10:29 -0700
Subject: [PATCH 0170/1066] TTY: create drivers/tty and move the tty core files
 there

The tty code should be in its own subdirectory and not in the char
driver with all of the cruft that is currently there.

Based on work done by Arnd Bergmann <arnd@arndb.de>

Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/Makefile                   |  1 +
 drivers/char/Makefile              | 11 +----------
 drivers/tty/Makefile               |  9 +++++++++
 drivers/{char => tty}/n_gsm.c      |  0
 drivers/{char => tty}/n_hdlc.c     |  0
 drivers/{char => tty}/n_r3964.c    |  0
 drivers/{char => tty}/n_tty.c      |  0
 drivers/{char => tty}/pty.c        |  0
 drivers/{char => tty}/sysrq.c      |  0
 drivers/{char => tty}/tty_audit.c  |  0
 drivers/{char => tty}/tty_buffer.c |  0
 drivers/{char => tty}/tty_io.c     |  0
 drivers/{char => tty}/tty_ioctl.c  |  0
 drivers/{char => tty}/tty_ldisc.c  |  0
 drivers/{char => tty}/tty_mutex.c  |  0
 drivers/{char => tty}/tty_port.c   |  0
 16 files changed, 11 insertions(+), 10 deletions(-)
 create mode 100644 drivers/tty/Makefile
 rename drivers/{char => tty}/n_gsm.c (100%)
 rename drivers/{char => tty}/n_hdlc.c (100%)
 rename drivers/{char => tty}/n_r3964.c (100%)
 rename drivers/{char => tty}/n_tty.c (100%)
 rename drivers/{char => tty}/pty.c (100%)
 rename drivers/{char => tty}/sysrq.c (100%)
 rename drivers/{char => tty}/tty_audit.c (100%)
 rename drivers/{char => tty}/tty_buffer.c (100%)
 rename drivers/{char => tty}/tty_io.c (100%)
 rename drivers/{char => tty}/tty_ioctl.c (100%)
 rename drivers/{char => tty}/tty_ldisc.c (100%)
 rename drivers/{char => tty}/tty_mutex.c (100%)
 rename drivers/{char => tty}/tty_port.c (100%)

diff --git a/drivers/Makefile b/drivers/Makefile
index 14cf9077bb2b..f3ebb30f1b7f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_REGULATOR)		+= regulator/
 
 # char/ comes before serial/ etc so that the VT console is the boot-time
 # default.
+obj-y				+= tty/
 obj-y				+= char/
 
 # gpu/ comes after char for AGP vs DRM startup
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 3a9c01416839..f308494bfc90 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -7,19 +7,13 @@
 #
 FONTMAPFILE = cp437.uni
 
-obj-y	 += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o tty_buffer.o tty_port.o
-
-obj-y				+= tty_mutex.o
-obj-$(CONFIG_LEGACY_PTYS)	+= pty.o
-obj-$(CONFIG_UNIX98_PTYS)	+= pty.o
+obj-y				+= mem.o random.o
 obj-$(CONFIG_TTY_PRINTK)	+= ttyprintk.o
 obj-y				+= misc.o
 obj-$(CONFIG_VT)		+= vt_ioctl.o vc_screen.o selection.o keyboard.o
 obj-$(CONFIG_BFIN_JTAG_COMM)	+= bfin_jtag_comm.o
 obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o
 obj-$(CONFIG_HW_CONSOLE)	+= vt.o defkeymap.o
-obj-$(CONFIG_AUDIT)		+= tty_audit.o
-obj-$(CONFIG_MAGIC_SYSRQ)	+= sysrq.o
 obj-$(CONFIG_MVME147_SCC)	+= generic_serial.o vme_scc.o
 obj-$(CONFIG_MVME162_SCC)	+= generic_serial.o vme_scc.o
 obj-$(CONFIG_BVME6000_SCC)	+= generic_serial.o vme_scc.o
@@ -41,8 +35,6 @@ obj-$(CONFIG_ISI)		+= isicom.o
 obj-$(CONFIG_SYNCLINK)		+= synclink.o
 obj-$(CONFIG_SYNCLINKMP)	+= synclinkmp.o
 obj-$(CONFIG_SYNCLINK_GT)	+= synclink_gt.o
-obj-$(CONFIG_N_HDLC)		+= n_hdlc.o
-obj-$(CONFIG_N_GSM)		+= n_gsm.o
 obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
 obj-$(CONFIG_SX)		+= sx.o generic_serial.o
 obj-$(CONFIG_RIO)		+= rio/ generic_serial.o
@@ -74,7 +66,6 @@ obj-$(CONFIG_PRINTER)		+= lp.o
 obj-$(CONFIG_APM_EMULATION)	+= apm-emulation.o
 
 obj-$(CONFIG_DTLK)		+= dtlk.o
-obj-$(CONFIG_R3964)		+= n_r3964.o
 obj-$(CONFIG_APPLICOM)		+= applicom.o
 obj-$(CONFIG_SONYPI)		+= sonypi.o
 obj-$(CONFIG_RTC)		+= rtc.o
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
new file mode 100644
index 000000000000..7f63b3315e82
--- /dev/null
+++ b/drivers/tty/Makefile
@@ -0,0 +1,9 @@
+obj-y				+= tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \
+				   tty_buffer.o tty_port.o tty_mutex.o
+obj-$(CONFIG_LEGACY_PTYS)	+= pty.o
+obj-$(CONFIG_UNIX98_PTYS)	+= pty.o
+obj-$(CONFIG_AUDIT)		+= tty_audit.o
+obj-$(CONFIG_MAGIC_SYSRQ)	+= sysrq.o
+obj-$(CONFIG_N_HDLC)		+= n_hdlc.o
+obj-$(CONFIG_N_GSM)		+= n_gsm.o
+obj-$(CONFIG_R3964)		+= n_r3964.o
diff --git a/drivers/char/n_gsm.c b/drivers/tty/n_gsm.c
similarity index 100%
rename from drivers/char/n_gsm.c
rename to drivers/tty/n_gsm.c
diff --git a/drivers/char/n_hdlc.c b/drivers/tty/n_hdlc.c
similarity index 100%
rename from drivers/char/n_hdlc.c
rename to drivers/tty/n_hdlc.c
diff --git a/drivers/char/n_r3964.c b/drivers/tty/n_r3964.c
similarity index 100%
rename from drivers/char/n_r3964.c
rename to drivers/tty/n_r3964.c
diff --git a/drivers/char/n_tty.c b/drivers/tty/n_tty.c
similarity index 100%
rename from drivers/char/n_tty.c
rename to drivers/tty/n_tty.c
diff --git a/drivers/char/pty.c b/drivers/tty/pty.c
similarity index 100%
rename from drivers/char/pty.c
rename to drivers/tty/pty.c
diff --git a/drivers/char/sysrq.c b/drivers/tty/sysrq.c
similarity index 100%
rename from drivers/char/sysrq.c
rename to drivers/tty/sysrq.c
diff --git a/drivers/char/tty_audit.c b/drivers/tty/tty_audit.c
similarity index 100%
rename from drivers/char/tty_audit.c
rename to drivers/tty/tty_audit.c
diff --git a/drivers/char/tty_buffer.c b/drivers/tty/tty_buffer.c
similarity index 100%
rename from drivers/char/tty_buffer.c
rename to drivers/tty/tty_buffer.c
diff --git a/drivers/char/tty_io.c b/drivers/tty/tty_io.c
similarity index 100%
rename from drivers/char/tty_io.c
rename to drivers/tty/tty_io.c
diff --git a/drivers/char/tty_ioctl.c b/drivers/tty/tty_ioctl.c
similarity index 100%
rename from drivers/char/tty_ioctl.c
rename to drivers/tty/tty_ioctl.c
diff --git a/drivers/char/tty_ldisc.c b/drivers/tty/tty_ldisc.c
similarity index 100%
rename from drivers/char/tty_ldisc.c
rename to drivers/tty/tty_ldisc.c
diff --git a/drivers/char/tty_mutex.c b/drivers/tty/tty_mutex.c
similarity index 100%
rename from drivers/char/tty_mutex.c
rename to drivers/tty/tty_mutex.c
diff --git a/drivers/char/tty_port.c b/drivers/tty/tty_port.c
similarity index 100%
rename from drivers/char/tty_port.c
rename to drivers/tty/tty_port.c

From 60d4ae8d436b8be6a8aedb63440203d5395e9f53 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Thu, 4 Nov 2010 12:50:47 -0700
Subject: [PATCH 0171/1066] TTY: create drivers/tty/vt and move the vt code
 there

The vt and other related code is moved into the drivers/tty/vt directory.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/char/Makefile                        | 33 -------------------
 drivers/tty/Makefile                         |  2 ++
 drivers/tty/vt/Makefile                      | 34 ++++++++++++++++++++
 drivers/{char => tty/vt}/consolemap.c        |  0
 drivers/{char => tty/vt}/cp437.uni           |  0
 drivers/{char => tty/vt}/defkeymap.c_shipped |  0
 drivers/{char => tty/vt}/defkeymap.map       |  0
 drivers/{char => tty/vt}/keyboard.c          |  0
 drivers/{char => tty/vt}/selection.c         |  0
 drivers/{char => tty/vt}/vc_screen.c         |  0
 drivers/{char => tty/vt}/vt.c                |  0
 drivers/{char => tty/vt}/vt_ioctl.c          |  0
 12 files changed, 36 insertions(+), 33 deletions(-)
 create mode 100644 drivers/tty/vt/Makefile
 rename drivers/{char => tty/vt}/consolemap.c (100%)
 rename drivers/{char => tty/vt}/cp437.uni (100%)
 rename drivers/{char => tty/vt}/defkeymap.c_shipped (100%)
 rename drivers/{char => tty/vt}/defkeymap.map (100%)
 rename drivers/{char => tty/vt}/keyboard.c (100%)
 rename drivers/{char => tty/vt}/selection.c (100%)
 rename drivers/{char => tty/vt}/vc_screen.c (100%)
 rename drivers/{char => tty/vt}/vt.c (100%)
 rename drivers/{char => tty/vt}/vt_ioctl.c (100%)

diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index f308494bfc90..ba53ec956c95 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -2,18 +2,10 @@
 # Makefile for the kernel character device drivers.
 #
 
-#
-# This file contains the font map for the default (hardware) font
-#
-FONTMAPFILE = cp437.uni
-
 obj-y				+= mem.o random.o
 obj-$(CONFIG_TTY_PRINTK)	+= ttyprintk.o
 obj-y				+= misc.o
-obj-$(CONFIG_VT)		+= vt_ioctl.o vc_screen.o selection.o keyboard.o
 obj-$(CONFIG_BFIN_JTAG_COMM)	+= bfin_jtag_comm.o
-obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o
-obj-$(CONFIG_HW_CONSOLE)	+= vt.o defkeymap.o
 obj-$(CONFIG_MVME147_SCC)	+= generic_serial.o vme_scc.o
 obj-$(CONFIG_MVME162_SCC)	+= generic_serial.o vme_scc.o
 obj-$(CONFIG_BVME6000_SCC)	+= generic_serial.o vme_scc.o
@@ -106,28 +98,3 @@ obj-$(CONFIG_RAMOOPS)		+= ramoops.o
 
 obj-$(CONFIG_JS_RTC)		+= js-rtc.o
 js-rtc-y = rtc.o
-
-# Files generated that shall be removed upon make clean
-clean-files := consolemap_deftbl.c defkeymap.c
-
-quiet_cmd_conmk = CONMK   $@
-      cmd_conmk = scripts/conmakehash $< > $@
-
-$(obj)/consolemap_deftbl.c: $(src)/$(FONTMAPFILE)
-	$(call cmd,conmk)
-
-$(obj)/defkeymap.o:  $(obj)/defkeymap.c
-
-# Uncomment if you're changing the keymap and have an appropriate
-# loadkeys version for the map. By default, we'll use the shipped
-# versions.
-# GENERATE_KEYMAP := 1
-
-ifdef GENERATE_KEYMAP
-
-$(obj)/defkeymap.c: $(obj)/%.c: $(src)/%.map
-	loadkeys --mktable $< > $@.tmp
-	sed -e 's/^static *//' $@.tmp > $@
-	rm $@.tmp
-
-endif
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index 7f63b3315e82..c43ef48b1a0f 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -7,3 +7,5 @@ obj-$(CONFIG_MAGIC_SYSRQ)	+= sysrq.o
 obj-$(CONFIG_N_HDLC)		+= n_hdlc.o
 obj-$(CONFIG_N_GSM)		+= n_gsm.o
 obj-$(CONFIG_R3964)		+= n_r3964.o
+
+obj-y				+= vt/
diff --git a/drivers/tty/vt/Makefile b/drivers/tty/vt/Makefile
new file mode 100644
index 000000000000..14a51c9960df
--- /dev/null
+++ b/drivers/tty/vt/Makefile
@@ -0,0 +1,34 @@
+#
+# This file contains the font map for the default (hardware) font
+#
+FONTMAPFILE = cp437.uni
+
+obj-$(CONFIG_VT)			+= vt_ioctl.o vc_screen.o \
+					   selection.o keyboard.o
+obj-$(CONFIG_CONSOLE_TRANSLATIONS)	+= consolemap.o consolemap_deftbl.o
+obj-$(CONFIG_HW_CONSOLE)		+= vt.o defkeymap.o
+
+# Files generated that shall be removed upon make clean
+clean-files := consolemap_deftbl.c defkeymap.c
+
+quiet_cmd_conmk = CONMK   $@
+      cmd_conmk = scripts/conmakehash $< > $@
+
+$(obj)/consolemap_deftbl.c: $(src)/$(FONTMAPFILE)
+	$(call cmd,conmk)
+
+$(obj)/defkeymap.o:  $(obj)/defkeymap.c
+
+# Uncomment if you're changing the keymap and have an appropriate
+# loadkeys version for the map. By default, we'll use the shipped
+# versions.
+# GENERATE_KEYMAP := 1
+
+ifdef GENERATE_KEYMAP
+
+$(obj)/defkeymap.c: $(obj)/%.c: $(src)/%.map
+	loadkeys --mktable $< > $@.tmp
+	sed -e 's/^static *//' $@.tmp > $@
+	rm $@.tmp
+
+endif
diff --git a/drivers/char/consolemap.c b/drivers/tty/vt/consolemap.c
similarity index 100%
rename from drivers/char/consolemap.c
rename to drivers/tty/vt/consolemap.c
diff --git a/drivers/char/cp437.uni b/drivers/tty/vt/cp437.uni
similarity index 100%
rename from drivers/char/cp437.uni
rename to drivers/tty/vt/cp437.uni
diff --git a/drivers/char/defkeymap.c_shipped b/drivers/tty/vt/defkeymap.c_shipped
similarity index 100%
rename from drivers/char/defkeymap.c_shipped
rename to drivers/tty/vt/defkeymap.c_shipped
diff --git a/drivers/char/defkeymap.map b/drivers/tty/vt/defkeymap.map
similarity index 100%
rename from drivers/char/defkeymap.map
rename to drivers/tty/vt/defkeymap.map
diff --git a/drivers/char/keyboard.c b/drivers/tty/vt/keyboard.c
similarity index 100%
rename from drivers/char/keyboard.c
rename to drivers/tty/vt/keyboard.c
diff --git a/drivers/char/selection.c b/drivers/tty/vt/selection.c
similarity index 100%
rename from drivers/char/selection.c
rename to drivers/tty/vt/selection.c
diff --git a/drivers/char/vc_screen.c b/drivers/tty/vt/vc_screen.c
similarity index 100%
rename from drivers/char/vc_screen.c
rename to drivers/tty/vt/vc_screen.c
diff --git a/drivers/char/vt.c b/drivers/tty/vt/vt.c
similarity index 100%
rename from drivers/char/vt.c
rename to drivers/tty/vt/vt.c
diff --git a/drivers/char/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
similarity index 100%
rename from drivers/char/vt_ioctl.c
rename to drivers/tty/vt/vt_ioctl.c

From 408af87a397a8ddef56ad39a79481f592aa1ac1a Mon Sep 17 00:00:00 2001
From: Jesper Juhl <jj@chaosbits.net>
Date: Thu, 4 Nov 2010 21:44:41 +0100
Subject: [PATCH 0172/1066] Clean up relay_alloc_page_array() slightly by using
 vzalloc rather than vmalloc and memset

We can optimize kernel/relay.c::relay_alloc_page_array() slightly by
using vzalloc.  The patch makes these changes:

 - use vzalloc instead of vmalloc+memset.
 - remove redundant local variable 'array'.
 - declare local 'pa_size' as const.

Cuts down nicely on both source and object-code size.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/relay.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/kernel/relay.c b/kernel/relay.c
index c7cf397fb929..859ea5a9605f 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -70,17 +70,10 @@ static const struct vm_operations_struct relay_file_mmap_ops = {
  */
 static struct page **relay_alloc_page_array(unsigned int n_pages)
 {
-	struct page **array;
-	size_t pa_size = n_pages * sizeof(struct page *);
-
-	if (pa_size > PAGE_SIZE) {
-		array = vmalloc(pa_size);
-		if (array)
-			memset(array, 0, pa_size);
-	} else {
-		array = kzalloc(pa_size, GFP_KERNEL);
-	}
-	return array;
+	const size_t pa_size = n_pages * sizeof(struct page *);
+	if (pa_size > PAGE_SIZE)
+		return vzalloc(pa_size);
+	return kzalloc(pa_size, GFP_KERNEL);
 }
 
 /*

From edde99ce05290e50ce0b3495d209e54e6349ab47 Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Mon, 25 Oct 2010 03:21:24 +0200
Subject: [PATCH 0173/1066] KVM: Write protect memory after slot swap

I have observed the following bug trigger:

1. userspace calls GET_DIRTY_LOG
2. kvm_mmu_slot_remove_write_access is called and makes a page ro
3. page fault happens and makes the page writeable
   fault is logged in the bitmap appropriately
4. kvm_vm_ioctl_get_dirty_log swaps slot pointers

a lot of time passes

5. guest writes into the page
6. userspace calls GET_DIRTY_LOG

At point (5), bitmap is clean and page is writeable,
thus, guest modification of memory is not logged
and GET_DIRTY_LOG returns an empty bitmap.

The rule is that all pages are either dirty in the current bitmap,
or write-protected, which is violated here.

It seems that just moving kvm_mmu_slot_remove_write_access down
to after the slot pointer swap should fix this bug.

KVM-Stable-Tag.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 2288ad829b32..b0818f672064 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3169,10 +3169,6 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 		struct kvm_memslots *slots, *old_slots;
 		unsigned long *dirty_bitmap;
 
-		spin_lock(&kvm->mmu_lock);
-		kvm_mmu_slot_remove_write_access(kvm, log->slot);
-		spin_unlock(&kvm->mmu_lock);
-
 		r = -ENOMEM;
 		dirty_bitmap = vmalloc(n);
 		if (!dirty_bitmap)
@@ -3194,6 +3190,10 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 		dirty_bitmap = old_slots->memslots[log->slot].dirty_bitmap;
 		kfree(old_slots);
 
+		spin_lock(&kvm->mmu_lock);
+		kvm_mmu_slot_remove_write_access(kvm, log->slot);
+		spin_unlock(&kvm->mmu_lock);
+
 		r = -EFAULT;
 		if (copy_to_user(log->dirty_bitmap, dirty_bitmap, n)) {
 			vfree(dirty_bitmap);

From eb45fda45f915c7ca3e81e005e853cb770da2642 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Mon, 25 Oct 2010 11:58:22 -0200
Subject: [PATCH 0174/1066] KVM: MMU: fix rmap_remove on non present sptes

drop_spte should not attempt to rmap_remove a non present shadow pte.

This fixes a BUG_ON seen on kvm-autotest.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reported-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 908ea5464a51..fb8b376bf28c 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -720,7 +720,7 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)
 	}
 }
 
-static void set_spte_track_bits(u64 *sptep, u64 new_spte)
+static int set_spte_track_bits(u64 *sptep, u64 new_spte)
 {
 	pfn_t pfn;
 	u64 old_spte = *sptep;
@@ -731,19 +731,20 @@ static void set_spte_track_bits(u64 *sptep, u64 new_spte)
 		old_spte = __xchg_spte(sptep, new_spte);
 
 	if (!is_rmap_spte(old_spte))
-		return;
+		return 0;
 
 	pfn = spte_to_pfn(old_spte);
 	if (!shadow_accessed_mask || old_spte & shadow_accessed_mask)
 		kvm_set_pfn_accessed(pfn);
 	if (!shadow_dirty_mask || (old_spte & shadow_dirty_mask))
 		kvm_set_pfn_dirty(pfn);
+	return 1;
 }
 
 static void drop_spte(struct kvm *kvm, u64 *sptep, u64 new_spte)
 {
-	set_spte_track_bits(sptep, new_spte);
-	rmap_remove(kvm, sptep);
+	if (set_spte_track_bits(sptep, new_spte))
+		rmap_remove(kvm, sptep);
 }
 
 static u64 *rmap_next(struct kvm *kvm, unsigned long *rmapp, u64 *spte)

From d8cdddcd645766cd4d80fa222226ae6ebfb706af Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segooon@gmail.com>
Date: Sat, 30 Oct 2010 13:04:24 +0400
Subject: [PATCH 0175/1066] KVM: PPC: fix information leak to userland

Structure kvm_ppc_pvinfo is copied to userland with flags and
pad fields unitialized.  It leads to leaking of contents of
kernel stack memory.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/powerpc/kvm/powerpc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 2f87a1627f6c..38f756f25053 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -617,6 +617,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 	switch (ioctl) {
 	case KVM_PPC_GET_PVINFO: {
 		struct kvm_ppc_pvinfo pvinfo;
+		memset(&pvinfo, 0, sizeof(pvinfo));
 		r = kvm_vm_ioctl_get_pvinfo(&pvinfo);
 		if (copy_to_user(argp, &pvinfo, sizeof(pvinfo))) {
 			r = -EFAULT;

From 97e69aa62f8b5d338d6cff49be09e37cc1262838 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segooon@gmail.com>
Date: Sat, 30 Oct 2010 22:54:47 +0400
Subject: [PATCH 0176/1066] KVM: x86: fix information leak to userland

Structures kvm_vcpu_events, kvm_debugregs, kvm_pit_state2 and
kvm_clock_data are copied to userland with some padding and reserved
fields unitialized.  It leads to leaking of contents of kernel stack
memory.  We have to initialize them to zero.

In patch v1 Jan Kiszka suggested to fill reserved fields with zeros
instead of memset'ting the whole struct.  It makes sense as these
fields are explicitly marked as padding.  No more fields need zeroing.

KVM-Stable-Tag.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/x86.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index b0818f672064..463c65b8f93f 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2560,6 +2560,7 @@ static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu,
 		!kvm_exception_is_soft(vcpu->arch.exception.nr);
 	events->exception.nr = vcpu->arch.exception.nr;
 	events->exception.has_error_code = vcpu->arch.exception.has_error_code;
+	events->exception.pad = 0;
 	events->exception.error_code = vcpu->arch.exception.error_code;
 
 	events->interrupt.injected =
@@ -2573,12 +2574,14 @@ static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu,
 	events->nmi.injected = vcpu->arch.nmi_injected;
 	events->nmi.pending = vcpu->arch.nmi_pending;
 	events->nmi.masked = kvm_x86_ops->get_nmi_mask(vcpu);
+	events->nmi.pad = 0;
 
 	events->sipi_vector = vcpu->arch.sipi_vector;
 
 	events->flags = (KVM_VCPUEVENT_VALID_NMI_PENDING
 			 | KVM_VCPUEVENT_VALID_SIPI_VECTOR
 			 | KVM_VCPUEVENT_VALID_SHADOW);
+	memset(&events->reserved, 0, sizeof(events->reserved));
 }
 
 static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
@@ -2623,6 +2626,7 @@ static void kvm_vcpu_ioctl_x86_get_debugregs(struct kvm_vcpu *vcpu,
 	dbgregs->dr6 = vcpu->arch.dr6;
 	dbgregs->dr7 = vcpu->arch.dr7;
 	dbgregs->flags = 0;
+	memset(&dbgregs->reserved, 0, sizeof(dbgregs->reserved));
 }
 
 static int kvm_vcpu_ioctl_x86_set_debugregs(struct kvm_vcpu *vcpu,
@@ -3106,6 +3110,7 @@ static int kvm_vm_ioctl_get_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps)
 		sizeof(ps->channels));
 	ps->flags = kvm->arch.vpit->pit_state.flags;
 	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
+	memset(&ps->reserved, 0, sizeof(ps->reserved));
 	return r;
 }
 
@@ -3486,6 +3491,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		user_ns.clock = kvm->arch.kvmclock_offset + now_ns;
 		local_irq_enable();
 		user_ns.flags = 0;
+		memset(&user_ns.pad, 0, sizeof(user_ns.pad));
 
 		r = -EFAULT;
 		if (copy_to_user(argp, &user_ns, sizeof(user_ns)))

From 453d9c57e27b4401bc3e98906bcac31ae8be0165 Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Mon, 1 Nov 2010 14:01:13 +0100
Subject: [PATCH 0177/1066] KVM: x86: Issue smp_call_function_many with
 preemption disabled

smp_call_function_many is specified to be called only with preemption
disabled. Fulfill this requirement.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/x86.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 463c65b8f93f..cdac9e592aa5 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3978,8 +3978,10 @@ int kvm_emulate_wbinvd(struct kvm_vcpu *vcpu)
 		return X86EMUL_CONTINUE;
 
 	if (kvm_x86_ops->has_wbinvd_exit()) {
+		preempt_disable();
 		smp_call_function_many(vcpu->arch.wbinvd_dirty_mask,
 				wbinvd_ipi, NULL, 1);
+		preempt_enable();
 		cpumask_clear(vcpu->arch.wbinvd_dirty_mask);
 	}
 	wbinvd();

From a36be1003a80197714fc2b6e198df2f31f9eb270 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Mon, 18 Oct 2010 17:35:48 -0500
Subject: [PATCH 0178/1066] PPC: KVM: Book E doesn't have __end_interrupts.

Fix an unresolved symbol with CONFIG_KVM_GUEST plus CONFIG_RELOCATABLE on
Book E.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kernel/kvm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c
index 428d0e538aec..b06bdae04064 100644
--- a/arch/powerpc/kernel/kvm.c
+++ b/arch/powerpc/kernel/kvm.c
@@ -127,7 +127,7 @@ static void kvm_patch_ins_nop(u32 *inst)
 
 static void kvm_patch_ins_b(u32 *inst, int addr)
 {
-#ifdef CONFIG_RELOCATABLE
+#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_PPC_BOOK3S)
 	/* On relocatable kernels interrupts handlers and our code
 	   can be in different regions, so we don't patch them */
 

From f22e2f049d4643ed3c2d498ca50f894ace87962b Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 5 Oct 2010 14:22:41 -0500
Subject: [PATCH 0179/1066] KVM: PPC: e500: Call kvm_vcpu_uninit() before
 kvmppc_e500_tlb_uninit().

The VCPU uninit calls some TLB functions, and the TLB uninit function
frees the memory used by them.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/e500.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
index 71750f2dd5d3..e3768ee9b595 100644
--- a/arch/powerpc/kvm/e500.c
+++ b/arch/powerpc/kvm/e500.c
@@ -138,8 +138,8 @@ void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu)
 	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
 
 	free_page((unsigned long)vcpu->arch.shared);
-	kvmppc_e500_tlb_uninit(vcpu_e500);
 	kvm_vcpu_uninit(vcpu);
+	kvmppc_e500_tlb_uninit(vcpu_e500);
 	kmem_cache_free(kvm_vcpu_cache, vcpu_e500);
 }
 

From bb59e9748f9bc95212c7fe21468ba184938c48cb Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Thu, 30 Sep 2010 14:28:50 -0500
Subject: [PATCH 0180/1066] KVM: PPC: BookE: fix sleep with interrupts disabled

It is not legal to call mutex_lock() with interrupts disabled.
This will assert with debug checks enabled.

If there's a real need to disable interrupts here, it could be done
after the mutex is acquired -- but I don't see why it's needed at all.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/timing.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/powerpc/kvm/timing.c b/arch/powerpc/kvm/timing.c
index 46fa04f12a9b..a021f5827a33 100644
--- a/arch/powerpc/kvm/timing.c
+++ b/arch/powerpc/kvm/timing.c
@@ -35,7 +35,6 @@ void kvmppc_init_timing_stats(struct kvm_vcpu *vcpu)
 	int i;
 
 	/* pause guest execution to avoid concurrent updates */
-	local_irq_disable();
 	mutex_lock(&vcpu->mutex);
 
 	vcpu->arch.last_exit_type = 0xDEAD;
@@ -51,7 +50,6 @@ void kvmppc_init_timing_stats(struct kvm_vcpu *vcpu)
 	vcpu->arch.timing_last_enter.tv64 = 0;
 
 	mutex_unlock(&vcpu->mutex);
-	local_irq_enable();
 }
 
 static void add_exit_timing(struct kvm_vcpu *vcpu, u64 duration, int type)

From df8940eadf011db2d4bedecf6eb659d44494edb3 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Thu, 30 Sep 2010 14:31:27 -0500
Subject: [PATCH 0181/1066] KVM: PPC: BookE: Load the lower half of MSR

This was preventing the guest from setting any bits in the
hardware MSR which aren't forced on, such as MSR[SPE].

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/kvm/booke_interrupts.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kvm/booke_interrupts.S b/arch/powerpc/kvm/booke_interrupts.S
index 049846911ce4..1cc471faac2d 100644
--- a/arch/powerpc/kvm/booke_interrupts.S
+++ b/arch/powerpc/kvm/booke_interrupts.S
@@ -416,7 +416,7 @@ lightweight_exit:
 	lwz	r3, VCPU_PC(r4)
 	mtsrr0	r3
 	lwz	r3, VCPU_SHARED(r4)
-	lwz	r3, VCPU_SHARED_MSR(r3)
+	lwz	r3, (VCPU_SHARED_MSR + 4)(r3)
 	oris	r3, r3, KVMPPC_MSR_MASK@h
 	ori	r3, r3, KVMPPC_MSR_MASK@l
 	mtsrr1	r3

From 65f75ace23863063aac374d1bdb302d103e89ec3 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 4 Nov 2010 10:28:00 -0700
Subject: [PATCH 0182/1066] leds-net5501: taints kernel, add license

Add MODULE_LICENSE() that matches file comments so that kernel
is not tainted.

	leds_net5501: module license 'unspecified' taints kernel.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/leds/leds-net5501.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/leds/leds-net5501.c b/drivers/leds/leds-net5501.c
index 3063f591f0dc..1739557a9038 100644
--- a/drivers/leds/leds-net5501.c
+++ b/drivers/leds/leds-net5501.c
@@ -92,3 +92,5 @@ unmap:
 }
 
 arch_initcall(soekris_init);
+
+MODULE_LICENSE("GPL");

From 69f8b74193444f1a6251a491f10b95faa77716d6 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <guenter.roeck@ericsson.com>
Date: Tue, 26 Oct 2010 15:59:21 -0700
Subject: [PATCH 0183/1066] hwmon: (ltc4261) Add missing newline in debug
 message

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/ltc4261.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/ltc4261.c b/drivers/hwmon/ltc4261.c
index 267626178678..15f137bebd70 100644
--- a/drivers/hwmon/ltc4261.c
+++ b/drivers/hwmon/ltc4261.c
@@ -82,7 +82,7 @@ static struct ltc4261_data *ltc4261_update_device(struct device *dev)
 			val = i2c_smbus_read_byte_data(client, i);
 			if (unlikely(val < 0)) {
 				dev_dbg(dev,
-					"Failed to read ADC value: error %d",
+					"Failed to read ADC value: error %d\n",
 					val);
 				ret = ERR_PTR(val);
 				goto abort;

From 475200c088a14666a03ed7f789c7db1ff5281bc5 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Fri, 5 Nov 2010 10:59:29 -0400
Subject: [PATCH 0184/1066] hwmon: (ltc4261) Fix error message format

adapter->id is deprecated and not set by any adapter driver, so this
was certainly not what the author wanted to use. adapter->nr maybe,
but as dev_err() already includes this value, as well as the client's
address, there's no point repeating them. Better print a simple error
message in plain English words.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/ltc4261.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/hwmon/ltc4261.c b/drivers/hwmon/ltc4261.c
index 15f137bebd70..4b50601027d3 100644
--- a/drivers/hwmon/ltc4261.c
+++ b/drivers/hwmon/ltc4261.c
@@ -230,8 +230,7 @@ static int ltc4261_probe(struct i2c_client *client,
 		return -ENODEV;
 
 	if (i2c_smbus_read_byte_data(client, LTC4261_STATUS) < 0) {
-		dev_err(&client->dev, "Failed to read register %d:%02x:%02x\n",
-			adapter->id, client->addr, LTC4261_STATUS);
+		dev_err(&client->dev, "Failed to read status register\n");
 		return -ENODEV;
 	}
 

From 377304abefa208890dce5739e4f297c93240efb2 Mon Sep 17 00:00:00 2001
From: Michael Spang <mspang@csclub.uwaterloo.ca>
Date: Fri, 5 Nov 2010 13:14:40 -0400
Subject: [PATCH 0185/1066] [ARM] TS-78xxx NAND resource type should be
 IORESOURCE_MEM

The type was IORESOURCE_IO which is not what is expected by
plat_nand_probe(). This device has not worked since 2d098a72
("mtd: plat_nand: request memory resource before doing ioremap").

Signed-off-by: Michael Spang <mspang@csclub.uwaterloo.ca>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
---
 arch/arm/mach-orion5x/ts78xx-setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 696b1a97f9e2..9a5d1ef1bd1f 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -239,7 +239,7 @@ static struct platform_nand_data ts78xx_ts_nand_data = {
 static struct resource ts78xx_ts_nand_resources = {
 	.start		= TS_NAND_DATA,
 	.end		= TS_NAND_DATA + 4,
-	.flags		= IORESOURCE_IO,
+	.flags		= IORESOURCE_MEM,
 };
 
 static struct platform_device ts78xx_ts_nand_device = {

From 7350f419724fd9472d3b5cc521538713f9797b62 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Wed, 3 Nov 2010 17:22:00 +0200
Subject: [PATCH 0186/1066] ARM: orion5x/kirkwood/mv78xx0: fix MPP
 configuration corner cases

Wrong MPP configuration would cause <cpu>_mpp_conf loop infinitely
because the mpp list iterator would not be incremented.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
---
 arch/arm/mach-kirkwood/mpp.c | 4 +---
 arch/arm/mach-mv78xx0/mpp.c  | 4 +---
 arch/arm/mach-orion5x/mpp.c  | 4 +---
 3 files changed, 3 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index 065187d177c6..27901f702feb 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -59,7 +59,7 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
 	}
 	printk("\n");
 
-	while (*mpp_list) {
+	for ( ; *mpp_list; mpp_list++) {
 		unsigned int num = MPP_NUM(*mpp_list);
 		unsigned int sel = MPP_SEL(*mpp_list);
 		int shift, gpio_mode;
@@ -88,8 +88,6 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
 		if (sel != 0)
 			gpio_mode = 0;
 		orion_gpio_set_valid(num, gpio_mode);
-
-		mpp_list++;
 	}
 
 	printk(KERN_DEBUG "  final MPP regs:");
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
index 354ac514eb89..84db2dfc475c 100644
--- a/arch/arm/mach-mv78xx0/mpp.c
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -54,7 +54,7 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
 	}
 	printk("\n");
 
-	while (*mpp_list) {
+	for ( ; *mpp_list; mpp_list++) {
 		unsigned int num = MPP_NUM(*mpp_list);
 		unsigned int sel = MPP_SEL(*mpp_list);
 		int shift, gpio_mode;
@@ -83,8 +83,6 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
 		if (sel != 0)
 			gpio_mode = 0;
 		orion_gpio_set_valid(num, gpio_mode);
-
-		mpp_list++;
 	}
 
 	printk(KERN_DEBUG "  final MPP regs:");
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index bc4c3b9aaf83..db485d3b8144 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -127,7 +127,7 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
 	/* Initialize gpiolib. */
 	orion_gpio_init();
 
-	while (mode->mpp >= 0) {
+	for ( ; mode->mpp >= 0; mode++) {
 		u32 *reg;
 		int num_type;
 		int shift;
@@ -160,8 +160,6 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
 			orion_gpio_set_unused(mode->mpp);
 
 		orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
-
-		mode++;
 	}
 
 	writel(mpp_0_7_ctrl, MPP_0_7_CTRL);

From c67236281c5d749741f5414103903a7c1b9c4636 Mon Sep 17 00:00:00 2001
From: Pavel Shilovsky <piastryyy@gmail.com>
Date: Wed, 3 Nov 2010 10:58:57 +0300
Subject: [PATCH 0187/1066] cifs: make cifs_set_oplock_level() take a
 cifsInodeInfo pointer

All the callers already have a pointer to struct cifsInodeInfo. Use it.

Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifsfs.c    |  3 +--
 fs/cifs/cifsproto.h |  2 +-
 fs/cifs/file.c      |  8 ++++----
 fs/cifs/misc.c      | 16 +++++++++-------
 4 files changed, 15 insertions(+), 14 deletions(-)

diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 38526a6c4acf..9c3789762ab7 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -321,8 +321,7 @@ cifs_alloc_inode(struct super_block *sb)
 	/* Until the file is open and we have gotten oplock
 	info back from the server, can not assume caching of
 	file data or metadata */
-	cifs_inode->clientCanCacheRead = false;
-	cifs_inode->clientCanCacheAll = false;
+	cifs_set_oplock_level(cifs_inode, 0);
 	cifs_inode->delete_pending = false;
 	cifs_inode->invalid_mapping = false;
 	cifs_inode->vfs_inode.i_blkbits = 14;  /* 2**14 = CIFS_MAX_MSGSIZE */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 7f050f4fc3d9..7ed69b6b5fe6 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -104,7 +104,7 @@ extern struct timespec cifs_NTtimeToUnix(__le64 utc_nanoseconds_since_1601);
 extern u64 cifs_UnixTimeToNT(struct timespec);
 extern struct timespec cnvrtDosUnixTm(__le16 le_date, __le16 le_time,
 				      int offset);
-extern void cifs_set_oplock_level(struct inode *inode, __u32 oplock);
+extern void cifs_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock);
 
 extern struct cifsFileInfo *cifs_new_fileinfo(__u16 fileHandle,
 				struct file *file, struct tcon_link *tlink,
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 777e7f42b5b1..06c3e83fa387 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -146,7 +146,7 @@ client_can_cache:
 		rc = cifs_get_inode_info(&inode, full_path, buf, inode->i_sb,
 					 xid, NULL);
 
-	cifs_set_oplock_level(inode, oplock);
+	cifs_set_oplock_level(pCifsInode, oplock);
 
 	return rc;
 }
@@ -248,7 +248,7 @@ cifs_new_fileinfo(__u16 fileHandle, struct file *file,
 		list_add_tail(&pCifsFile->flist, &pCifsInode->openFileList);
 	spin_unlock(&cifs_file_list_lock);
 
-	cifs_set_oplock_level(inode, oplock);
+	cifs_set_oplock_level(pCifsInode, oplock);
 
 	file->private_data = pCifsFile;
 	return pCifsFile;
@@ -279,7 +279,7 @@ void cifsFileInfo_put(struct cifsFileInfo *cifs_file)
 	if (list_empty(&cifsi->openFileList)) {
 		cFYI(1, "closing last open instance for inode %p",
 			cifs_file->dentry->d_inode);
-		cifs_set_oplock_level(inode, 0);
+		cifs_set_oplock_level(cifsi, 0);
 	}
 	spin_unlock(&cifs_file_list_lock);
 
@@ -611,7 +611,7 @@ reopen_success:
 	     we can not go to the server to get the new inod
 	     info */
 
-	cifs_set_oplock_level(inode, oplock);
+	cifs_set_oplock_level(pCifsInode, oplock);
 
 	cifs_relock_file(pCifsFile);
 
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index d3b9ddebc17e..43f10281bc19 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -570,7 +570,7 @@ is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv)
 				cFYI(1, "file id match, oplock break");
 				pCifsInode = CIFS_I(netfile->dentry->d_inode);
 
-				cifs_set_oplock_level(netfile->dentry->d_inode,
+				cifs_set_oplock_level(pCifsInode,
 						      pSMB->OplockLevel);
 				/*
 				 * cifs_oplock_break_put() can't be called
@@ -722,18 +722,20 @@ cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb)
 	}
 }
 
-void cifs_set_oplock_level(struct inode *inode, __u32 oplock)
+void cifs_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock)
 {
-	struct cifsInodeInfo *cinode = CIFS_I(inode);
+	oplock &= 0xF;
 
-	if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
+	if (oplock == OPLOCK_EXCLUSIVE) {
 		cinode->clientCanCacheAll = true;
 		cinode->clientCanCacheRead = true;
-		cFYI(1, "Exclusive Oplock granted on inode %p", inode);
-	} else if ((oplock & 0xF) == OPLOCK_READ) {
+		cFYI(1, "Exclusive Oplock granted on inode %p",
+		     &cinode->vfs_inode);
+	} else if (oplock == OPLOCK_READ) {
 		cinode->clientCanCacheAll = false;
 		cinode->clientCanCacheRead = true;
-		cFYI(1, "Level II Oplock granted on inode %p", inode);
+		cFYI(1, "Level II Oplock granted on inode %p",
+		    &cinode->vfs_inode);
 	} else {
 		cinode->clientCanCacheAll = false;
 		cinode->clientCanCacheRead = false;

From b7283945c5ed8e78f0fe2c3313d8d1cdbc19b4b3 Mon Sep 17 00:00:00 2001
From: Thomas Weber <weber@corscience.de>
Date: Mon, 1 Nov 2010 22:48:11 +0000
Subject: [PATCH 0188/1066] OMAP2: Devkit8000: Fix mmc regulator failure

This patch fixes the following error:

>regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
>twl_reg twl_reg.6: can't register VMMC1, -22
>twl_reg: probe of twl_reg.6 failed with error -22

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-devkit8000.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 067f4379c87f..53ac762518bd 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -242,9 +242,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	devkit8000_vmmc1_supply.dev = mmc[0].dev;
-
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 

From e860e6da96f5a320a752da232e03d7bf885710b7 Mon Sep 17 00:00:00 2001
From: Mathias Nyman <mathias.nyman@nokia.com>
Date: Mon, 25 Oct 2010 14:35:24 +0000
Subject: [PATCH 0189/1066] omap: dma: Add read-back to DMA interrupt handler
 to avoid spuriousinterrupts

Flush the writes to IRQSTATUS_L0 register in the DMA interrupt handler by reading the register
directly after write. This prevents the spurious DMA interrupts noted when using VDD_OPP 1

Signed-off-by: Mathias Nyman <mathias.nyman@nokia.com>
Acked-by: Santosh Shilimkar <Santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/dma.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index f5c5b8da9a87..2c2826571d45 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1983,6 +1983,8 @@ static int omap2_dma_handle_ch(int ch)
 
 	dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch));
 	dma_write(1 << ch, IRQSTATUS_L0);
+	/* read back the register to flush the write */
+	dma_read(IRQSTATUS_L0);
 
 	/* If the ch is not chained then chain_id will be -1 */
 	if (dma_chan[ch].chain_id != -1) {

From 1cff502d8b22272addc4f5f57346d598b4755d9e Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Tue, 2 Nov 2010 14:04:01 +0000
Subject: [PATCH 0190/1066] OMAP1: camera.h: add missing include

#include <media/omap1_camera.h> directive is required to
compile the dependant boards (board-ams-delta for now).

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/include/mach/camera.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-omap1/include/mach/camera.h b/arch/arm/mach-omap1/include/mach/camera.h
index fd54b452eb22..847d00f0bb0a 100644
--- a/arch/arm/mach-omap1/include/mach/camera.h
+++ b/arch/arm/mach-omap1/include/mach/camera.h
@@ -1,6 +1,8 @@
 #ifndef __ASM_ARCH_CAMERA_H_
 #define __ASM_ARCH_CAMERA_H_
 
+#include <media/omap1_camera.h>
+
 void omap1_camera_init(void *);
 
 static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info)

From e0a70217107e6f9844628120412cb27bb4cea194 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@redhat.com>
Date: Fri, 5 Nov 2010 16:53:42 +0100
Subject: [PATCH 0191/1066] posix-cpu-timers: workaround to suppress the
 problems with mt exec

posix-cpu-timers.c correctly assumes that the dying process does
posix_cpu_timers_exit_group() and removes all !CPUCLOCK_PERTHREAD
timers from signal->cpu_timers list.

But, it also assumes that timer->it.cpu.task is always the group
leader, and thus the dead ->task means the dead thread group.

This is obviously not true after de_thread() changes the leader.
After that almost every posix_cpu_timer_ method has problems.

It is not simple to fix this bug correctly. First of all, I think
that timer->it.cpu should use struct pid instead of task_struct.
Also, the locking should be reworked completely. In particular,
tasklist_lock should not be used at all. This all needs a lot of
nontrivial and hard-to-test changes.

Change __exit_signal() to do posix_cpu_timers_exit_group() when
the old leader dies during exec. This is not the fix, just the
temporary hack to hide the problem for 2.6.37 and stable. IOW,
this is obviously wrong but this is what we currently have anyway:
cpu timers do not work after mt exec.

In theory this change adds another race. The exiting leader can
detach the timers which were attached to the new leader. However,
the window between de_thread() and release_task() is small, we
can pretend that sys_timer_create() was called before de_thread().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/exit.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/kernel/exit.c b/kernel/exit.c
index b194febf5799..21aa7b3001fb 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -95,6 +95,14 @@ static void __exit_signal(struct task_struct *tsk)
 		tty = sig->tty;
 		sig->tty = NULL;
 	} else {
+		/*
+		 * This can only happen if the caller is de_thread().
+		 * FIXME: this is the temporary hack, we should teach
+		 * posix-cpu-timers to handle this case correctly.
+		 */
+		if (unlikely(has_group_leader_pid(tsk)))
+			posix_cpu_timers_exit_group(tsk);
+
 		/*
 		 * If there is any task waiting for the group exit
 		 * then notify it:

From 433039e97f672b81e6c8f6daef385dcf035c6e29 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Fri, 5 Nov 2010 16:17:39 -0700
Subject: [PATCH 0192/1066] watchdog: Fix section mismatch and potential
 undefined behavior.

Commit d9ca07a05ce1 ("watchdog: Avoid kernel crash when disabling
watchdog") introduces a section mismatch.

Now that we reference no_watchdog from non-__init code it can no longer
be __initdata.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/watchdog.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index bafba687a6d8..6e3c41a4024c 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -43,7 +43,7 @@ static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts_saved);
 static DEFINE_PER_CPU(struct perf_event *, watchdog_ev);
 #endif
 
-static int __initdata no_watchdog;
+static int no_watchdog;
 
 
 /* boot commands */

From c093ee4f07f46d3a835841cafa07514fa94878d2 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 5 Nov 2010 17:45:59 -0700
Subject: [PATCH 0193/1066] floppy: fix use-after-free in module load failure
 path

Commit 488211844e0c ("floppy: switch to one queue per drive instead of
sharing a queue") introduced a use-after-free.  We do "put_disk()" on
the disk device _before_ we then clean up the queue associated with that
disk.

Move the put_disk() down to avoid dereferencing a free'd data structure.

Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Reported-and-tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/block/floppy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 767107cce982..8f19b380ca83 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4363,9 +4363,9 @@ out_unreg_blkdev:
 out_put_disk:
 	while (dr--) {
 		del_timer(&motor_off_timer[dr]);
-		put_disk(disks[dr]);
 		if (disks[dr]->queue)
 			blk_cleanup_queue(disks[dr]->queue);
+		put_disk(disks[dr]);
 	}
 	return err;
 }

From 151f52f09c5728ecfdd0c289da1a4b30bb416f2c Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 5 Nov 2010 18:57:04 -0700
Subject: [PATCH 0194/1066] ipw2x00: remove the right /proc/net entry

Commit 27ae60f8f7aa ("ipw2x00: replace "ieee80211" with "libipw" where
appropriate") changed DRV_NAME to be "libipw", but didn't properly fix
up the places where it was used to specify the name for the /proc/net/
directory.

For backwards compatibility reasons, that directory name remained
"ieee80211", but due to the DRV_NAME change, the error case printouts
and the cleanup functions now used "libipw" instead.  Which made it all
fail badly.

For example, on module unload as reported by Randy:

  WARNING: at fs/proc/generic.c:816 remove_proc_entry+0x156/0x35e()
  name 'libipw'

because it's trying to unregister a /proc directory that obviously
doesn't even exist.

Clean it all up to use DRV_PROCNAME for the actual /proc directory name.

Reported-and-tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Pavel Roskin <proski@gnu.org>
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/wireless/ipw2x00/libipw_module.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index 32dee2ce5d31..d5ef696298ee 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -54,6 +54,7 @@
 
 #define DRV_DESCRIPTION "802.11 data/management/control stack"
 #define DRV_NAME        "libipw"
+#define DRV_PROCNAME	"ieee80211"
 #define DRV_VERSION	LIBIPW_VERSION
 #define DRV_COPYRIGHT   "Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>"
 
@@ -293,16 +294,16 @@ static int __init libipw_init(void)
 	struct proc_dir_entry *e;
 
 	libipw_debug_level = debug;
-	libipw_proc = proc_mkdir("ieee80211", init_net.proc_net);
+	libipw_proc = proc_mkdir(DRV_PROCNAME, init_net.proc_net);
 	if (libipw_proc == NULL) {
-		LIBIPW_ERROR("Unable to create " DRV_NAME
+		LIBIPW_ERROR("Unable to create " DRV_PROCNAME
 				" proc directory\n");
 		return -EIO;
 	}
 	e = proc_create("debug_level", S_IRUGO | S_IWUSR, libipw_proc,
 			&debug_level_proc_fops);
 	if (!e) {
-		remove_proc_entry(DRV_NAME, init_net.proc_net);
+		remove_proc_entry(DRV_PROCNAME, init_net.proc_net);
 		libipw_proc = NULL;
 		return -EIO;
 	}
@@ -319,7 +320,7 @@ static void __exit libipw_exit(void)
 #ifdef CONFIG_LIBIPW_DEBUG
 	if (libipw_proc) {
 		remove_proc_entry("debug_level", libipw_proc);
-		remove_proc_entry(DRV_NAME, init_net.proc_net);
+		remove_proc_entry(DRV_PROCNAME, init_net.proc_net);
 		libipw_proc = NULL;
 	}
 #endif				/* CONFIG_LIBIPW_DEBUG */

From 1db01135df7aa8b456e093a781f1d7f7016ec01e Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Fri, 5 Nov 2010 22:18:23 -0700
Subject: [PATCH 0195/1066] TTY: move .gitignore from drivers/char/ to
 drivers/tty/vt/

The autogenerated files (consolemap_deftbl.c and defkeymap.c) need to
be ignored by git, so move the .gitignore file that was doing it to the
properly location now that the files have moved as well.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/{char => tty/vt}/.gitignore | 0
 1 file changed, 0 insertions(+), 0 deletions(-)
 rename drivers/{char => tty/vt}/.gitignore (100%)

diff --git a/drivers/char/.gitignore b/drivers/tty/vt/.gitignore
similarity index 100%
rename from drivers/char/.gitignore
rename to drivers/tty/vt/.gitignore

From d017bf6b4ff57db16a481a48bdad79274610a403 Mon Sep 17 00:00:00 2001
From: Vivek Goyal <vgoyal@redhat.com>
Date: Sat, 6 Nov 2010 08:16:05 -0400
Subject: [PATCH 0196/1066] floppy: fix another use-after-free

While scanning the floopy code due to c093ee4f07f4 ("floppy: fix
use-after-free in module load failure path"), I found one more instance
of trying to access disk->queue pointer after doing put_disk() on
gendisk.  For some reason , floppy moule still loads/unloads fine.  The
object is probably still around with right pointer values.

 o There seems to be one more instance of trying to cleanup the request
   queue after we have called put_disk() on associated gendisk.

 o This fix is more out of code inspection.  Even without this fix for
   some reason I am able to load/unload floppy module without any
   issues.

 o Floppy module loads/unloads fine after the fix.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/block/floppy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 8f19b380ca83..3951020e494a 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4573,8 +4573,8 @@ static void __exit floppy_module_exit(void)
 			device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos);
 			platform_device_unregister(&floppy_device[drive]);
 		}
-		put_disk(disks[drive]);
 		blk_cleanup_queue(disks[drive]->queue);
+		put_disk(disks[drive]);
 	}
 
 	del_timer_sync(&fd_timeout);

From 71a295602ed967fa22d96d57a2e38bb86de24db7 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Fri, 5 Nov 2010 13:50:48 -0400
Subject: [PATCH 0197/1066] ASoC: Lock the CODEC in PXA external jack controls

When doing anything with the system, especially DAPM, we need to hold the
CODEC mutex.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 sound/soc/pxa/corgi.c    | 5 +++++
 sound/soc/pxa/magician.c | 4 ++++
 sound/soc/pxa/poodle.c   | 5 +++++
 sound/soc/pxa/spitz.c    | 5 +++++
 sound/soc/pxa/tosa.c     | 5 +++++
 5 files changed, 24 insertions(+)

diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index 97e9423615c9..f451acd4935b 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -100,8 +100,13 @@ static int corgi_startup(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 
+	mutex_lock(&codec->mutex);
+
 	/* check the jack status at stream startup */
 	corgi_ext_control(codec);
+
+	mutex_unlock(&codec->mutex);
+
 	return 0;
 }
 
diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c
index b8207ced4072..5ef0526924b9 100644
--- a/sound/soc/pxa/magician.c
+++ b/sound/soc/pxa/magician.c
@@ -72,9 +72,13 @@ static int magician_startup(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 
+	mutex_lock(&codec->mutex);
+
 	/* check the jack status at stream startup */
 	magician_ext_control(codec);
 
+	mutex_unlock(&codec->mutex);
+
 	return 0;
 }
 
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index af84ee9c5e11..84edd0385a21 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -77,8 +77,13 @@ static int poodle_startup(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 
+	mutex_lock(&codec->mutex);
+
 	/* check the jack status at stream startup */
 	poodle_ext_control(codec);
+
+	mutex_unlock(&codec->mutex);
+
 	return 0;
 }
 
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index f470f360f4dd..0b30d7de24ec 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -108,8 +108,13 @@ static int spitz_startup(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 
+	mutex_lock(&codec->mutex);
+
 	/* check the jack status at stream startup */
 	spitz_ext_control(codec);
+
+	mutex_unlock(&codec->mutex);
+
 	return 0;
 }
 
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index 73d0edd8ded9..7b983f935454 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -81,8 +81,13 @@ static int tosa_startup(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 
+	mutex_lock(&codec->mutex);
+
 	/* check the jack status at stream startup */
 	tosa_ext_control(codec);
+
+	mutex_unlock(&codec->mutex);
+
 	return 0;
 }
 

From 197ebd4053c42351e3737d83aebb33ed97ed2dd8 Mon Sep 17 00:00:00 2001
From: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Date: Fri, 5 Nov 2010 10:36:24 +0000
Subject: [PATCH 0198/1066] ASoC: WM8776: Removed unneeded struct member

The member reg_cache is not used at all and therefore it should be
removed.  This member was usually needed for older versions of ASoC
that did not handle caching automatically and had to be done in the
driver itself.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/wm8776.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index 04182c464e35..0132a27140ae 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -34,7 +34,6 @@
 /* codec private data */
 struct wm8776_priv {
 	enum snd_soc_control_type control_type;
-	u16 reg_cache[WM8776_CACHEREGNUM];
 	int sysclk[2];
 };
 

From 557a3dac2c1436054a8d4493d0ee835dd034c8f7 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Sat, 6 Nov 2010 11:27:04 -0700
Subject: [PATCH 0199/1066] Staging: ath6kl: remove empty files that mess with
 'distclean'

These two .h files would get removed from the tree when doing
	make distclean

It turns out they are not needed at all, so just delete them which fixes
people's git trees when doing development.

Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/ath6kl/os/linux/include/athendpack_linux.h   | 0
 drivers/staging/ath6kl/os/linux/include/athstartpack_linux.h | 0
 2 files changed, 0 insertions(+), 0 deletions(-)
 delete mode 100644 drivers/staging/ath6kl/os/linux/include/athendpack_linux.h
 delete mode 100644 drivers/staging/ath6kl/os/linux/include/athstartpack_linux.h

diff --git a/drivers/staging/ath6kl/os/linux/include/athendpack_linux.h b/drivers/staging/ath6kl/os/linux/include/athendpack_linux.h
deleted file mode 100644
index e69de29bb2d1..000000000000
diff --git a/drivers/staging/ath6kl/os/linux/include/athstartpack_linux.h b/drivers/staging/ath6kl/os/linux/include/athstartpack_linux.h
deleted file mode 100644
index e69de29bb2d1..000000000000

From 86c2c0a8a4965ae5cbc0ff97ed39a4472e8e9b23 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Sat, 6 Nov 2010 20:11:38 +0000
Subject: [PATCH 0200/1066] NET: pktgen - fix compile warning
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This should fix the following warning:

net/core/pktgen.c: In function ‘pktgen_if_write’:
net/core/pktgen.c:890: warning: comparison of distinct pointer types lacks a cast

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Reviewed-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/pktgen.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index fbce4b05a53e..1992cd050e26 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -887,7 +887,7 @@ static ssize_t pktgen_if_write(struct file *file,
 	i += len;
 
 	if (debug) {
-		size_t copy = min(count, 1023);
+		size_t copy = min_t(size_t, count, 1023);
 		char tb[copy + 1];
 		if (copy_from_user(tb, user_buffer, copy))
 			return -EFAULT;

From c947f69fff183e5d2a06160d9262b5dab7359e95 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Wed, 3 Nov 2010 16:00:15 +0000
Subject: [PATCH 0201/1066] ARM: Fix DMA coherent allocator alignment
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

An out by one bug meant that the DMA coherent allocator was aligning
to one more bit than it should, causing it to run out of available
memory quicker.  Fix this.

Reported-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/dma-mapping.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index e4dd0646e859..ac6a36142fcd 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -198,7 +198,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
 	 * fragmentation of the DMA space, and also prevents allocations
 	 * smaller than a section from crossing a section boundary.
 	 */
-	bit = fls(size - 1) + 1;
+	bit = fls(size - 1);
 	if (bit > SECTION_SHIFT)
 		bit = SECTION_SHIFT;
 	align = 1 << bit;

From d33aadbf8e9ba0b844c2a4a03723969c913ab03a Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Thu, 4 Nov 2010 18:22:51 +0100
Subject: [PATCH 0202/1066] ARM: 6468/1: backtrace: fix calculation of thread
 stack base

When unwinding stack frames we must take care not to unwind
areas of memory that lie outside of the known extent of the stack.

This patch fixes an incorrect calculation of the stack base where
THREAD_SIZE is added to the stack pointer after it has already
been aligned to this value. Since the ALIGN macro performs this
addition internally, we end up overshooting the base by 8k.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/stacktrace.c | 2 +-
 arch/arm/kernel/unwind.c     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 20b7411e47fd..c2e112e1a05f 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -28,7 +28,7 @@ int notrace unwind_frame(struct stackframe *frame)
 
 	/* only go to a higher address on the stack */
 	low = frame->sp;
-	high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+	high = ALIGN(low, THREAD_SIZE);
 
 	/* check current frame pointer is within bounds */
 	if (fp < (low + 12) || fp + 4 >= high)
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 2a161765f6d5..d2cb0b3c9872 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -279,7 +279,7 @@ int unwind_frame(struct stackframe *frame)
 
 	/* only go to a higher address on the stack */
 	low = frame->sp;
-	high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+	high = ALIGN(low, THREAD_SIZE);
 
 	pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
 		 frame->pc, frame->lr, frame->sp);

From c3b291d98878a5f25fee56255bcfa420e85dff59 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Thu, 4 Nov 2010 18:23:50 +0100
Subject: [PATCH 0203/1066] ARM: 6469/1: perf-events: squash compiler warning

armv7_pmnc_counter_has_overflowed can return uninitialised data
if an invalid counter is specified.

This patch fixes the code to return 0 in this case, which squashes
the compiler warning from GCC 4.5.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/perf_event.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 49643b1467e6..07a50357492a 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -1749,7 +1749,7 @@ static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
 static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
 					enum armv7_counters counter)
 {
-	int ret;
+	int ret = 0;
 
 	if (counter == ARMV7_CYCLE_COUNTER)
 		ret = pmnc & ARMV7_FLAG_C;

From d4c7b1f9b41b76f6e794fdc4043f1903809e84d9 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Thu, 4 Nov 2010 18:24:22 +0100
Subject: [PATCH 0204/1066] ARM: 6470/1: atomic64: use generic implementation
 for OABI configurations

The old apcs-gnu ABI doesn't guarantee that double words are allocated
to registers with even alignment, causing the 64-bit exclusive memory
operations to be rejected by the assembler.

This patch requires that CONFIG_AEABI is set in order to use the native
atomic operations and falls back to the generic (spinlock) code otherwise.

Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a19a5266d5fc..8ae3d48d504c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -6,7 +6,7 @@ config ARM
 	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
-	select GENERIC_ATOMIC64 if (!CPU_32v6K)
+	select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
 	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_ARCH_KGDB
 	select HAVE_KPROBES if (!XIP_KERNEL)

From 85d988fcff5a7e35df0d0fb0c581470f4b72a3de Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Tue, 19 Oct 2010 21:14:55 +0100
Subject: [PATCH 0205/1066] ARM: 6462/1: EP93xx: Document DMA M2P API

Add kernel-doc documentation for the EP93xx DMA memory to
peripheral/peripheral to memory API.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/include/mach/dma.h | 111 ++++++++++++++++++++++--
 1 file changed, 102 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
index 3a5961d3f3b1..5e31b2b25da9 100644
--- a/arch/arm/mach-ep93xx/include/mach/dma.h
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -1,5 +1,13 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/dma.h
+/**
+ * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine
+ *
+ * The EP93xx DMA M2P subsystem handles DMA transfers between memory and
+ * peripherals. DMA M2P channels are available for audio, UARTs and IrDA.
+ * See chapter 10 of the EP93xx users guide for full details on the DMA M2P
+ * engine.
+ *
+ * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code.
+ *
  */
 
 #ifndef __ASM_ARCH_DMA_H
@@ -8,12 +16,34 @@
 #include <linux/list.h>
 #include <linux/types.h>
 
+/**
+ * struct ep93xx_dma_buffer - Information about a buffer to be transferred
+ * using the DMA M2P engine
+ *
+ * @list: Entry in DMA buffer list
+ * @bus_addr: Physical address of the buffer
+ * @size: Size of the buffer in bytes
+ */
 struct ep93xx_dma_buffer {
 	struct list_head	list;
 	u32			bus_addr;
 	u16			size;
 };
 
+/**
+ * struct ep93xx_dma_m2p_client - Information about a DMA M2P client
+ *
+ * @name: Unique name for this client
+ * @flags: Client flags
+ * @cookie: User data to pass to callback functions
+ * @buffer_started: Non NULL function to call when a transfer is started.
+ * 			The arguments are the user data cookie and the DMA
+ *			buffer which is starting.
+ * @buffer_finished: Non NULL function to call when a transfer is completed.
+ *			The arguments are the user data cookie, the DMA buffer
+ *			which has completed, and a boolean flag indicating if
+ *			the transfer had an error.
+ */
 struct ep93xx_dma_m2p_client {
 	char			*name;
 	u8			flags;
@@ -24,10 +54,11 @@ struct ep93xx_dma_m2p_client {
 					struct ep93xx_dma_buffer *buf,
 					int bytes, int error);
 
-	/* Internal to the DMA code.  */
+	/* private: Internal use only */
 	void			*channel;
 };
 
+/* DMA M2P ports */
 #define EP93XX_DMA_M2P_PORT_I2S1	0x00
 #define EP93XX_DMA_M2P_PORT_I2S2	0x01
 #define EP93XX_DMA_M2P_PORT_AAC1	0x02
@@ -39,18 +70,80 @@ struct ep93xx_dma_m2p_client {
 #define EP93XX_DMA_M2P_PORT_UART3	0x08
 #define EP93XX_DMA_M2P_PORT_IRDA	0x09
 #define EP93XX_DMA_M2P_PORT_MASK	0x0f
-#define EP93XX_DMA_M2P_TX		0x00
-#define EP93XX_DMA_M2P_RX		0x10
-#define EP93XX_DMA_M2P_ABORT_ON_ERROR	0x20
-#define EP93XX_DMA_M2P_IGNORE_ERROR	0x40
-#define EP93XX_DMA_M2P_ERROR_MASK	0x60
 
-int  ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+/* DMA M2P client flags */
+#define EP93XX_DMA_M2P_TX		0x00	/* Memory to peripheral */
+#define EP93XX_DMA_M2P_RX		0x10	/* Peripheral to memory */
+
+/*
+ * DMA M2P client error handling flags. See the EP93xx users guide
+ * documentation on the DMA M2P CONTROL register for more details
+ */
+#define EP93XX_DMA_M2P_ABORT_ON_ERROR	0x20	/* Abort on peripheral error */
+#define EP93XX_DMA_M2P_IGNORE_ERROR	0x40	/* Ignore peripheral errors */
+#define EP93XX_DMA_M2P_ERROR_MASK	0x60	/* Mask of error bits */
+
+/**
+ * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P
+ * subsystem
+ *
+ * @m2p: Client information to register
+ * returns 0 on success
+ *
+ * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA
+ * client
+ */
+int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+
+/**
+ * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P
+ * subsystem
+ *
+ * @m2p: Client to unregister
+ *
+ * Any transfers currently in progress will be completed in hardware, but
+ * ignored in software.
+ */
 void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p);
+
+/**
+ * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer
+ *
+ * @m2p: DMA Client to submit the transfer on
+ * @buf: DMA Buffer to submit
+ *
+ * If the current or next transfer positions are free on the M2P client then
+ * the transfer is started immediately. If not, the transfer is added to the
+ * list of pending transfers. This function must not be called from the
+ * buffer_finished callback for an M2P channel.
+ *
+ */
 void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p,
 			   struct ep93xx_dma_buffer *buf);
+
+/**
+ * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list
+ * for an M2P channel
+ *
+ * @m2p: DMA Client to submit the transfer on
+ * @buf: DMA Buffer to submit
+ *
+ * This function must only be called from the buffer_finished callback for an
+ * M2P channel. It is commonly used to add the next transfer in a chained list
+ * of DMA transfers.
+ */
 void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p,
 				     struct ep93xx_dma_buffer *buf);
+
+/**
+ * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client
+ *
+ * @m2p: DMA client to flush transfers on
+ *
+ * Any transfers currently in progress will be completed in hardware, but
+ * ignored in software.
+ *
+ */
 void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p);
 
 #endif /* __ASM_ARCH_DMA_H */

From d8b16b3d1c9d8d9124d647d05797383d35e2d645 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Sat, 6 Nov 2010 12:41:16 -0700
Subject: [PATCH 0206/1066] ceph: fix bad pointer dereference in
 ceph_fill_trace

We dereference *in a few lines down, but only set it on rename.  It is
apparently pretty rare for this to trigger, but I have been hitting it
with a clustered MDSs.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/inode.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 1d6a45b5a04c..cd0432c03d2f 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -1055,7 +1055,8 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req,
 		ininfo = rinfo->targeti.in;
 		vino.ino = le64_to_cpu(ininfo->ino);
 		vino.snap = le64_to_cpu(ininfo->snapid);
-		if (!dn->d_inode) {
+		in = dn->d_inode;
+		if (!in) {
 			in = ceph_get_inode(sb, vino);
 			if (IS_ERR(in)) {
 				pr_err("fill_trace bad get_inode "

From 7421ab8041d98363edfb85955fa3b9849ffae366 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Sun, 7 Nov 2010 09:07:15 -0800
Subject: [PATCH 0207/1066] ceph: fix open for write on clustered mds

Normally when we open a file we already have a cap, and simply update the
wanted set.  However, if we open a file for write, but don't have an auth
cap, that doesn't work; we need to open a new cap with the auth MDS.  Only
reuse existing caps if we are opening for read or the existing cap is auth.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/file.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index e77c28cf3690..87ee944724f8 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -154,11 +154,13 @@ int ceph_open(struct inode *inode, struct file *file)
 	}
 
 	/*
-	 * No need to block if we have any caps.  Update wanted set
+	 * No need to block if we have caps on the auth MDS (for
+	 * write) or any MDS (for read).  Update wanted set
 	 * asynchronously.
 	 */
 	spin_lock(&inode->i_lock);
-	if (__ceph_is_any_real_caps(ci)) {
+	if (__ceph_is_any_real_caps(ci) &&
+	    (((fmode & CEPH_FILE_MODE_WR) == 0) || ci->i_auth_cap)) {
 		int mds_wanted = __ceph_caps_mds_wanted(ci);
 		int issued = __ceph_caps_issued(ci, NULL);
 

From 912a9b0319a8eb9e0834b19a25e01013ab2d6a9f Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Sun, 7 Nov 2010 09:37:25 -0800
Subject: [PATCH 0208/1066] ceph: only let auth caps update max_size

Only the auth MDS has a meaningful max_size value for us, so only update it
in fill_inode if we're being issued an auth cap.  Otherwise, a random
stat result from a non-auth MDS can clobber a meaningful max_size, get
the client<->mds cap state out of sync, and make writes hang.

Specifically, even if the client re-requests a larger max_size (which it
will), the MDS won't respond because as far as it knows we already have a
sufficiently large value.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/inode.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index cd0432c03d2f..0a49ffde5bcb 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -606,7 +606,14 @@ static int fill_inode(struct inode *inode,
 			    le32_to_cpu(info->time_warp_seq),
 			    &ctime, &mtime, &atime);
 
-	ci->i_max_size = le64_to_cpu(info->max_size);
+	/* only update max_size on auth cap */
+	if ((info->cap.flags & CEPH_CAP_FLAG_AUTH) &&
+	    ci->i_max_size != le64_to_cpu(info->max_size)) {
+		dout("max_size %lld -> %llu\n", ci->i_max_size,
+		     le64_to_cpu(info->max_size));
+		ci->i_max_size = le64_to_cpu(info->max_size);
+	}
+
 	ci->i_layout = info->layout;
 	inode->i_blkbits = fls(le32_to_cpu(info->layout.fl_stripe_unit)) - 1;
 

From feb4cc9bb433bf1491ac5ffbba133f3258dacf06 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Sun, 7 Nov 2010 09:39:00 -0800
Subject: [PATCH 0209/1066] ceph: re-request max_size if cap auth changes

If the auth cap migrates to another MDS, clear requested_max_size so that
we resend any pending max_size increase requests.  This fixes potential
hangs on writes that extend a file and race with an cap migration between
MDSs.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/caps.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 6e0942f33dd8..04b207b0c842 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -2689,6 +2689,11 @@ static void handle_cap_import(struct ceph_mds_client *mdsc,
 		     NULL /* no caps context */);
 	try_flush_caps(inode, session, NULL);
 	up_read(&mdsc->snap_rwsem);
+
+	/* make sure we re-request max_size, if necessary */
+	spin_lock(&inode->i_lock);
+	ci->i_requested_max_size = 0;
+	spin_unlock(&inode->i_lock);
 }
 
 /*

From 235584b6f3b71bc1381be13a963a16f7107650cf Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sat, 30 Oct 2010 14:21:24 -0700
Subject: [PATCH 0210/1066] ARM: arch/arm/kernel/hw_breakpoint.c: Convert
 WARN_ON to WARN

Message isn't printed by WARN_ON.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/hw_breakpoint.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 54593b0c241b..21e3a4ab3b8c 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -748,8 +748,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 		breakpoint_handler(addr, regs);
 		break;
 	case ARM_ENTRY_ASYNC_WATCHPOINT:
-		WARN_ON("Asynchronous watchpoint exception taken. "
-			"Debugging results may be unreliable");
+		WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
 	case ARM_ENTRY_SYNC_WATCHPOINT:
 		watchpoint_handler(addr, regs);
 		break;

From 69448c2a4d23e5883cbca21a173e3eb89f095746 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Fri, 5 Nov 2010 16:12:34 -0700
Subject: [PATCH 0211/1066] ARM: arch/arm/kernel/traps.c: Convert
 sprintf_symbol to %pS

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/traps.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index cda78d59aa31..446aee97436f 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -53,10 +53,7 @@ static void dump_mem(const char *, const char *, unsigned long, unsigned long);
 void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
 {
 #ifdef CONFIG_KALLSYMS
-	char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
-	sprint_symbol(sym1, where);
-	sprint_symbol(sym2, from);
-	printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
+	printk("[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from);
 #else
 	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
 #endif

From 25d5c699f983a2da51f5165eb9a8fc6338124b6c Mon Sep 17 00:00:00 2001
From: Philip Rakity <prakity@marvell.com>
Date: Sun, 7 Nov 2010 16:22:28 -0500
Subject: [PATCH 0212/1066] mmc: Fix printing of card DDR type

We should not call mmc_card_set_ddr_mode() if we are in single data
mode.  This sets DDR and causes the kernel log to say the card is DDR
when it is not.

Explicitly set ddr to 0 rather then rely on MMC_SDR_MODE being 0 when
doing the checks.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 drivers/mmc/core/mmc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 995261f7fd70..77f93c3b8808 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -375,7 +375,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	struct mmc_card *oldcard)
 {
 	struct mmc_card *card;
-	int err, ddr = MMC_SDR_MODE;
+	int err, ddr = 0;
 	u32 cid[4];
 	unsigned int max_dtr;
 
@@ -562,7 +562,11 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 			       1 << bus_width, ddr);
 			err = 0;
 		} else {
-			mmc_card_set_ddr_mode(card);
+			if (ddr)
+				mmc_card_set_ddr_mode(card);
+			else
+				ddr = MMC_SDR_MODE;
+
 			mmc_set_bus_width_ddr(card->host, bus_width, ddr);
 		}
 	}

From 14d4031d21d8a63ad84e5ab9198d0503efabc780 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 4 Nov 2010 13:59:11 +0800
Subject: [PATCH 0213/1066] mmc: ushc: Return proper error code for
 ushc_probe()

Improves error handling in the ushc driver.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 drivers/mmc/host/ushc.c | 30 ++++++++++++++++++++++--------
 1 file changed, 22 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/host/ushc.c b/drivers/mmc/host/ushc.c
index b4ead4a13c98..f8f65df9b017 100644
--- a/drivers/mmc/host/ushc.c
+++ b/drivers/mmc/host/ushc.c
@@ -425,7 +425,7 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
 	struct mmc_host *mmc;
 	struct ushc_data *ushc;
-	int ret = -ENOMEM;
+	int ret;
 
 	mmc = mmc_alloc_host(sizeof(struct ushc_data), &intf->dev);
 	if (mmc == NULL)
@@ -462,11 +462,15 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 	mmc->max_blk_count = 511;
 
 	ushc->int_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->int_urb == NULL)
+	if (ushc->int_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->int_data = kzalloc(sizeof(struct ushc_int_data), GFP_KERNEL);
-	if (ushc->int_data == NULL)
+	if (ushc->int_data == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	usb_fill_int_urb(ushc->int_urb, ushc->usb_dev,
 			 usb_rcvintpipe(usb_dev,
 					intf->cur_altsetting->endpoint[0].desc.bEndpointAddress),
@@ -475,11 +479,15 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 			 intf->cur_altsetting->endpoint[0].desc.bInterval);
 
 	ushc->cbw_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->cbw_urb == NULL)
+	if (ushc->cbw_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->cbw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
-	if (ushc->cbw == NULL)
+	if (ushc->cbw == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->cbw->signature = USHC_CBW_SIGNATURE;
 
 	usb_fill_bulk_urb(ushc->cbw_urb, ushc->usb_dev, usb_sndbulkpipe(usb_dev, 2),
@@ -487,15 +495,21 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 			  cbw_callback, ushc);
 
 	ushc->data_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->data_urb == NULL)
+	if (ushc->data_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 
 	ushc->csw_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->csw_urb == NULL)
+	if (ushc->csw_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->csw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
-	if (ushc->csw == NULL)
+	if (ushc->csw == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	usb_fill_bulk_urb(ushc->csw_urb, ushc->usb_dev, usb_rcvbulkpipe(usb_dev, 6),
 			  ushc->csw, sizeof(struct ushc_csw),
 			  csw_callback, ushc);

From 5f619704d18b93869d045abc49e09cdba109b04b Mon Sep 17 00:00:00 2001
From: Daniel Drake <dsd@laptop.org>
Date: Thu, 4 Nov 2010 22:20:39 +0000
Subject: [PATCH 0214/1066] mmc: sdhci: Properly enable SDIO IRQ wakeups

A little more work was needed for SDIO IRQ wakeups to be functional.

Wake-on-WLAN on the SD WiFi adapter in the XO-1.5 laptop is now working.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 drivers/mmc/host/sdhci-pci.c | 11 +++++++++--
 drivers/mmc/host/sdhci.c     | 10 ++++++++++
 drivers/mmc/host/sdhci.h     |  4 ++++
 3 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 55746bac2f44..d196e77a93dc 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -637,6 +637,7 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
 {
 	struct sdhci_pci_chip *chip;
 	struct sdhci_pci_slot *slot;
+	mmc_pm_flag_t slot_pm_flags;
 	mmc_pm_flag_t pm_flags = 0;
 	int i, ret;
 
@@ -657,7 +658,11 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
 			return ret;
 		}
 
-		pm_flags |= slot->host->mmc->pm_flags;
+		slot_pm_flags = slot->host->mmc->pm_flags;
+		if (slot_pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+			sdhci_enable_irq_wakeups(slot->host);
+
+		pm_flags |= slot_pm_flags;
 	}
 
 	if (chip->fixes && chip->fixes->suspend) {
@@ -671,8 +676,10 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
 
 	pci_save_state(pdev);
 	if (pm_flags & MMC_PM_KEEP_POWER) {
-		if (pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+		if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) {
+			pci_pme_active(pdev, true);
 			pci_enable_wake(pdev, PCI_D3hot, 1);
+		}
 		pci_set_power_state(pdev, PCI_D3hot);
 	} else {
 		pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 782c0ee3c925..154cbf83c1ab 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1681,6 +1681,16 @@ int sdhci_resume_host(struct sdhci_host *host)
 
 EXPORT_SYMBOL_GPL(sdhci_resume_host);
 
+void sdhci_enable_irq_wakeups(struct sdhci_host *host)
+{
+	u8 val;
+	val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
+	val |= SDHCI_WAKE_ON_INT;
+	sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
+}
+
+EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
+
 #endif /* CONFIG_PM */
 
 /*****************************************************************************\
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index b7b8a3b28b01..d52a7163b97a 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -87,6 +87,9 @@
 #define SDHCI_BLOCK_GAP_CONTROL	0x2A
 
 #define SDHCI_WAKE_UP_CONTROL	0x2B
+#define  SDHCI_WAKE_ON_INT	0x01
+#define  SDHCI_WAKE_ON_INSERT	0x02
+#define  SDHCI_WAKE_ON_REMOVE	0x04
 
 #define SDHCI_CLOCK_CONTROL	0x2C
 #define  SDHCI_DIVIDER_SHIFT	8
@@ -317,6 +320,7 @@ extern void sdhci_remove_host(struct sdhci_host *host, int dead);
 #ifdef CONFIG_PM
 extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
 extern int sdhci_resume_host(struct sdhci_host *host);
+extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
 #endif
 
 #endif /* __SDHCI_HW_H */

From 37865fe91582582a6f6c00652f6a2b1ff71f8a78 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Sat, 23 Oct 2010 01:57:21 +0200
Subject: [PATCH 0215/1066] mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch fixes timeout problems on i.MX's sdhci as suggested by
Richard Zhu.

Tested on:
- i.MX257: not needed
- i.MX357: needed
- i.MX515: needed

More details can be found here:
http://lists.infradead.org/pipermail/linux-arm-kernel/2010-October/029748.html

Signed-off-by: Eric Bénard <eric@eukrea.com>
Tested-by: Shawn Guo <shawn.gsc@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 2e9cca19c90b..28e63ef58d0f 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sdhci-pltfm.h>
+#include <mach/hardware.h>
 #include "sdhci.h"
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
@@ -112,6 +113,9 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd
 	clk_enable(clk);
 	pltfm_host->clk = clk;
 
+	if (cpu_is_mx35() || cpu_is_mx51())
+		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
 	return 0;
 }
 

From 16a790bcce87740d219b7227eaa4df72804097ea Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Sat, 23 Oct 2010 01:57:22 +0200
Subject: [PATCH 0216/1066] mmc: sdhci-esdhc-imx: enable QUIRK_NO_MULTIBLOCK
 only for i.MX25 and i.MX35
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Only these CPUs list the bug in their errata.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 28e63ef58d0f..9b82910b9dbb 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -116,6 +116,10 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd
 	if (cpu_is_mx35() || cpu_is_mx51())
 		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
 
+	/* Fix errata ENGcm07207 which is present on i.MX25 and i.MX35 */
+	if (cpu_is_mx25() || cpu_is_mx35())
+		host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
+
 	return 0;
 }
 
@@ -137,10 +141,8 @@ static struct sdhci_ops sdhci_esdhc_ops = {
 };
 
 struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
-	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_MULTIBLOCK
-			| SDHCI_QUIRK_BROKEN_ADMA,
+	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA,
 	/* ADMA has issues. Might be fixable */
-	/* NO_MULTIBLOCK might be MX35 only (Errata: ENGcm07207) */
 	.ops = &sdhci_esdhc_ops,
 	.init = esdhc_pltfm_init,
 	.exit = esdhc_pltfm_exit,

From 6af26c6c99f01e810f9944543df810e320284aa3 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 2 Nov 2010 11:27:24 +0000
Subject: [PATCH 0217/1066] sh: add clk_round_parent() to optimize parent clock
 rate

Sometimes it is possible and reasonable to adjust the parent clock rate to
improve precision of the child clock, e.g., if the child clock has no siblings.
clk_round_parent() is a new addition to the SH clock-framework API, that
implements such an optimization for child clocks with divisors, taking all
integer values in a range.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/sh/clk/core.c  | 75 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/sh_clk.h |  4 +++
 2 files changed, 79 insertions(+)

diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
index 861144360d89..b3840597ad6e 100644
--- a/drivers/sh/clk/core.c
+++ b/drivers/sh/clk/core.c
@@ -541,6 +541,81 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 }
 EXPORT_SYMBOL_GPL(clk_round_rate);
 
+long clk_round_parent(struct clk *clk, unsigned long target,
+		      unsigned long *best_freq, unsigned long *parent_freq,
+		      unsigned int div_min, unsigned int div_max)
+{
+	struct cpufreq_frequency_table *freq, *best = NULL;
+	unsigned long error = ULONG_MAX, freq_high, freq_low, div;
+	struct clk *parent = clk_get_parent(clk);
+
+	if (!parent) {
+		*parent_freq = 0;
+		*best_freq = clk_round_rate(clk, target);
+		return abs(target - *best_freq);
+	}
+
+	for (freq = parent->freq_table; freq->frequency != CPUFREQ_TABLE_END;
+	     freq++) {
+		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
+			continue;
+
+		if (unlikely(freq->frequency / target <= div_min - 1)) {
+			unsigned long freq_max = (freq->frequency + div_min / 2) / div_min;
+			if (error > target - freq_max) {
+				error = target - freq_max;
+				best = freq;
+				if (best_freq)
+					*best_freq = freq_max;
+			}
+			pr_debug("too low freq %lu, error %lu\n", freq->frequency, target - freq_max);
+			if (!error)
+				break;
+			continue;
+		}
+
+		if (unlikely(freq->frequency / target >= div_max)) {
+			unsigned long freq_min = (freq->frequency + div_max / 2) / div_max;
+			if (error > freq_min - target) {
+				error = freq_min - target;
+				best = freq;
+				if (best_freq)
+					*best_freq = freq_min;
+			}
+			pr_debug("too high freq %lu, error %lu\n", freq->frequency, freq_min - target);
+			if (!error)
+				break;
+			continue;
+		}
+
+
+		div = freq->frequency / target;
+		freq_high = freq->frequency / div;
+		freq_low = freq->frequency / (div + 1);
+		if (freq_high - target < error) {
+			error = freq_high - target;
+			best = freq;
+			if (best_freq)
+				*best_freq = freq_high;
+		}
+		if (target - freq_low < error) {
+			error = target - freq_low;
+			best = freq;
+			if (best_freq)
+				*best_freq = freq_low;
+		}
+		pr_debug("%u / %lu = %lu, / %lu = %lu, best %lu, parent %u\n",
+			 freq->frequency, div, freq_high, div + 1, freq_low,
+			 *best_freq, best->frequency);
+		if (!error)
+			break;
+	}
+	if (parent_freq)
+		*parent_freq = best->frequency;
+	return error;
+}
+EXPORT_SYMBOL_GPL(clk_round_parent);
+
 #ifdef CONFIG_PM
 static int clks_sysdev_suspend(struct sys_device *dev, pm_message_t state)
 {
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index 4dca992f3093..cea0c38e7a63 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -122,6 +122,10 @@ int clk_rate_table_find(struct clk *clk,
 long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
 			      unsigned int div_max, unsigned long rate);
 
+long clk_round_parent(struct clk *clk, unsigned long target,
+		      unsigned long *best_freq, unsigned long *parent_freq,
+		      unsigned int div_min, unsigned int div_max);
+
 #define SH_CLK_MSTP32(_parent, _enable_reg, _enable_bit, _flags)	\
 {									\
 	.parent		= _parent,					\

From d0013c9e3bc75b3e1652bd5999a9a8d56a822ce4 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Thu, 4 Nov 2010 14:14:29 +0000
Subject: [PATCH 0218/1066] sh: make some needlessly global sh7724 clocks
 static

These clocks are currently only used inside one .c file and are not
declared in any headers, therefore having them global is useless.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index 2d9700c6b53a..0fe2e9329cb2 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -48,7 +48,7 @@ static struct clk r_clk = {
  * Default rate for the root input clock, reset this with clk_set_rate()
  * from the platform code.
  */
-struct clk extal_clk = {
+static struct clk extal_clk = {
 	.rate		= 33333333,
 };
 
@@ -111,7 +111,7 @@ static struct clk div3_clk = {
 	.parent		= &pll_clk,
 };
 
-struct clk *main_clks[] = {
+static struct clk *main_clks[] = {
 	&r_clk,
 	&extal_clk,
 	&fll_clk,
@@ -156,7 +156,7 @@ struct clk div4_clks[DIV4_NR] = {
 
 enum { DIV6_V, DIV6_FA, DIV6_FB, DIV6_I, DIV6_S, DIV6_NR };
 
-struct clk div6_clks[DIV6_NR] = {
+static struct clk div6_clks[DIV6_NR] = {
 	[DIV6_V] = SH_CLK_DIV6(&div3_clk, VCLKCR, 0),
 	[DIV6_FA] = SH_CLK_DIV6(&div3_clk, FCLKACR, 0),
 	[DIV6_FB] = SH_CLK_DIV6(&div3_clk, FCLKBCR, 0),

From a766b29790b2b6582345624a6e9e686d8015efe1 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 8 Nov 2010 09:40:23 +0900
Subject: [PATCH 0219/1066] sh: clkfwk: Fix up checkpatch warnings.

The clk_round_parent() change introduced various checkpatch warnings,
tidy them up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/sh/clk/core.c | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
index b3840597ad6e..09615b51d591 100644
--- a/drivers/sh/clk/core.c
+++ b/drivers/sh/clk/core.c
@@ -561,57 +561,74 @@ long clk_round_parent(struct clk *clk, unsigned long target,
 			continue;
 
 		if (unlikely(freq->frequency / target <= div_min - 1)) {
-			unsigned long freq_max = (freq->frequency + div_min / 2) / div_min;
+			unsigned long freq_max;
+
+			freq_max = (freq->frequency + div_min / 2) / div_min;
 			if (error > target - freq_max) {
 				error = target - freq_max;
 				best = freq;
 				if (best_freq)
 					*best_freq = freq_max;
 			}
-			pr_debug("too low freq %lu, error %lu\n", freq->frequency, target - freq_max);
+
+			pr_debug("too low freq %lu, error %lu\n", freq->frequency,
+				 target - freq_max);
+
 			if (!error)
 				break;
+
 			continue;
 		}
 
 		if (unlikely(freq->frequency / target >= div_max)) {
-			unsigned long freq_min = (freq->frequency + div_max / 2) / div_max;
+			unsigned long freq_min;
+
+			freq_min = (freq->frequency + div_max / 2) / div_max;
 			if (error > freq_min - target) {
 				error = freq_min - target;
 				best = freq;
 				if (best_freq)
 					*best_freq = freq_min;
 			}
-			pr_debug("too high freq %lu, error %lu\n", freq->frequency, freq_min - target);
+
+			pr_debug("too high freq %lu, error %lu\n", freq->frequency,
+				 freq_min - target);
+
 			if (!error)
 				break;
+
 			continue;
 		}
 
-
 		div = freq->frequency / target;
 		freq_high = freq->frequency / div;
 		freq_low = freq->frequency / (div + 1);
+
 		if (freq_high - target < error) {
 			error = freq_high - target;
 			best = freq;
 			if (best_freq)
 				*best_freq = freq_high;
 		}
+
 		if (target - freq_low < error) {
 			error = target - freq_low;
 			best = freq;
 			if (best_freq)
 				*best_freq = freq_low;
 		}
+
 		pr_debug("%u / %lu = %lu, / %lu = %lu, best %lu, parent %u\n",
 			 freq->frequency, div, freq_high, div + 1, freq_low,
 			 *best_freq, best->frequency);
+
 		if (!error)
 			break;
 	}
+
 	if (parent_freq)
 		*parent_freq = best->frequency;
+
 	return error;
 }
 EXPORT_SYMBOL_GPL(clk_round_parent);

From 43b81f85ebfbed9c720f3c27ec7f364930aa3b5e Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sun, 7 Nov 2010 19:58:05 -0800
Subject: [PATCH 0220/1066] net dst: need linux/cache.h for
 ____cacheline_aligned_in_smp.

Presently the b43legacy build fails on an sh randconfig:

In file included from include/net/dst.h:12,
                 from drivers/net/wireless/b43legacy/xmit.c:32:
include/net/dst_ops.h:28: error: expected ':', ',', ';', '}' or '__attribute__' before '____cacheline_aligned_in_smp'
include/net/dst_ops.h: In function 'dst_entries_get_fast':
include/net/dst_ops.h:33: error: 'struct dst_ops' has no member named 'pcpuc_entries'
include/net/dst_ops.h: In function 'dst_entries_get_slow':
include/net/dst_ops.h:41: error: 'struct dst_ops' has no member named 'pcpuc_entries'
include/net/dst_ops.h: In function 'dst_entries_add':
include/net/dst_ops.h:49: error: 'struct dst_ops' has no member named 'pcpuc_entries'
include/net/dst_ops.h: In function 'dst_entries_init':
include/net/dst_ops.h:55: error: 'struct dst_ops' has no member named 'pcpuc_entries'
include/net/dst_ops.h: In function 'dst_entries_destroy':
include/net/dst_ops.h:60: error: 'struct dst_ops' has no member named 'pcpuc_entries'
make[5]: *** [drivers/net/wireless/b43legacy/xmit.o] Error 1
make[5]: *** Waiting for unfinished jobs....

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/dst_ops.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/net/dst_ops.h b/include/net/dst_ops.h
index 1fa5306e3e23..51665b3461b8 100644
--- a/include/net/dst_ops.h
+++ b/include/net/dst_ops.h
@@ -2,6 +2,7 @@
 #define _NET_DST_OPS_H
 #include <linux/types.h>
 #include <linux/percpu_counter.h>
+#include <linux/cache.h>
 
 struct dst_entry;
 struct kmem_cachep;

From 3f25cb042ca77ac52546ae9f0039cfd0a243698c Mon Sep 17 00:00:00 2001
From: Tony SIM <chinyeow.sim.xt@renesas.com>
Date: Mon, 8 Nov 2010 04:07:47 +0000
Subject: [PATCH 0221/1066] ARM: mach-shmobile: intc-sh7372: fix interrupt
 number

Signed-off-by: Tony SIM <chinyeow.sim.xt@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/intc-sh7372.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index 4cd3cae38e72..30b2f400666a 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -98,7 +98,7 @@ static struct intc_vect intca_vectors[] __initdata = {
 	INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
 	INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
 	INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
-	INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+	INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ21A, 0x32a0),
 	INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
 	INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
 	INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),

From 2e351ec61c35fac01ed1fb1ce35c183bf85e780c Mon Sep 17 00:00:00 2001
From: Yusuke Goda <yusuke.goda.sx@renesas.com>
Date: Mon, 8 Nov 2010 05:45:09 +0000
Subject: [PATCH 0222/1066] ARM: mach-shmobile: ap4evb: Mark NOR boot loader
 partitions read-only.

This makes the loader and bootenv partitions read-only under MTD for the
on-board NOR flash.

Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ap4evb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 32d9e2816e56..63c2fcac8e1e 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -163,11 +163,13 @@ static struct mtd_partition nor_flash_partitions[] = {
 		.name		= "loader",
 		.offset		= 0x00000000,
 		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
 	},
 	{
 		.name		= "bootenv",
 		.offset		= MTDPART_OFS_APPEND,
 		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
 	},
 	{
 		.name		= "kernel_ro",

From 899be96db75451ba98cb217109ef4cf2ee6de927 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Mon, 8 Nov 2010 13:35:10 +0800
Subject: [PATCH 0223/1066] rtc: rtc-sh - fix a memory leak

request_mem_region() will call kzalloc to allocate memory for struct resource.
release_resource() unregisters the resource but does not free the allocated
memory, thus use release_mem_region() instead to fix the memory leak.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/rtc/rtc-sh.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index 5efbd5990ff8..06e41ed93230 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -761,7 +761,7 @@ err_unmap:
 	clk_put(rtc->clk);
 	iounmap(rtc->regbase);
 err_badmap:
-	release_resource(rtc->res);
+	release_mem_region(rtc->res->start, rtc->regsize);
 err_badres:
 	kfree(rtc);
 
@@ -786,7 +786,7 @@ static int __exit sh_rtc_remove(struct platform_device *pdev)
 	}
 
 	iounmap(rtc->regbase);
-	release_resource(rtc->res);
+	release_mem_region(rtc->res->start, rtc->regsize);
 
 	clk_disable(rtc->clk);
 	clk_put(rtc->clk);

From 07397021058b7db468b67f8c41ce29ef6331ab92 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Fri, 24 Sep 2010 13:44:11 +0300
Subject: [PATCH 0224/1066] usb: musb: gadget: kill duplicate code in
 musb_gadget_queue()

musb_gadget_queue() checks for '!req->buf' condition twice:
in the second case the code is both duplicated and unreachable
as the first check returns early.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_gadget.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index f37b8594edeb..36cfd060dbe5 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1169,8 +1169,6 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 						: DMA_FROM_DEVICE);
 			request->mapped = 0;
 		}
-	} else if (!req->buf) {
-		return -ENODATA;
 	} else
 		request->mapped = 0;
 

From b47b30ccdaad5f2fc39a1a65921bffd150574a91 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon, 8 Nov 2010 01:12:29 +0000
Subject: [PATCH 0225/1066] drm/i915: Avoid might_fault during pwrite whilst
 holding our mutex

... and so prevent a potential circular reference:

  [ INFO: possible circular locking dependency detected ]
  2.6.37-rc1-uwe1+ #4
  -------------------------------------------------------
  Xorg/1401 is trying to acquire lock:
   (&mm->mmap_sem){++++++}, at: [<c01e4ddb>] might_fault+0x4b/0xa0

  but task is already holding lock:
   (&dev->struct_mutex){+.+.+.}, at: [<f869c3ac>]
  i915_mutex_lock_interruptible+0x3c/0x60 [i915]

  which lock already depends on the new lock.

When the locking around the pwrite ioctl was simplified, I did not spot
that the phys path never took any locks and so we introduced this
potential circular reference.

Reported-by: Uwe Helm <uwe.helm@googlemail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_gem.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 984eb6e9db03..eba9b1615228 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -4878,17 +4878,24 @@ i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
 		     struct drm_file *file_priv)
 {
 	struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
-	void *obj_addr;
-	int ret;
-	char __user *user_data;
+	void *vaddr = obj_priv->phys_obj->handle->vaddr + args->offset;
+	char __user *user_data = (char __user *) (uintptr_t) args->data_ptr;
 
-	user_data = (char __user *) (uintptr_t) args->data_ptr;
-	obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset;
+	DRM_DEBUG_DRIVER("vaddr %p, %lld\n", vaddr, args->size);
 
-	DRM_DEBUG_DRIVER("obj_addr %p, %lld\n", obj_addr, args->size);
-	ret = copy_from_user(obj_addr, user_data, args->size);
-	if (ret)
-		return -EFAULT;
+	if (__copy_from_user_inatomic_nocache(vaddr, user_data, args->size)) {
+		unsigned long unwritten;
+
+		/* The physical object once assigned is fixed for the lifetime
+		 * of the obj, so we can safely drop the lock and continue
+		 * to access vaddr.
+		 */
+		mutex_unlock(&dev->struct_mutex);
+		unwritten = copy_from_user(vaddr, user_data, args->size);
+		mutex_lock(&dev->struct_mutex);
+		if (unwritten)
+			return -EFAULT;
+	}
 
 	drm_agp_chipset_flush(dev);
 	return 0;

From 08deebf98783d3de553eed2c9b6b8dcc7e168567 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri, 5 Nov 2010 08:56:38 +0000
Subject: [PATCH 0226/1066] drm/i915/ringbuffer: Use the HEAD auto-reporting
 mechanism

My Sandybridge only reports 0 for the ring buffer registers, causing it
to hang as soon as we exhaust the available ring. As a workaround, take
advantage of our huge ring buffers and use the auto-reporting mechanism
to update the status page with the HEAD location every 64 KiB.

Cherry-picked from 6aa56062eaba67adfb247cded244fd877329588d.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31404
Tested-by: Zhao Jian <jian.j.zhao@intel.com>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_ringbuffer.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 7c1f3ff2f788..b83306f9244b 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -177,7 +177,7 @@ static int init_ring_common(struct drm_device *dev,
 
 	I915_WRITE_CTL(ring,
 			((ring->gem_object->size - PAGE_SIZE) & RING_NR_PAGES)
-			| RING_NO_REPORT | RING_VALID);
+			| RING_REPORT_64K | RING_VALID);
 
 	head = I915_READ_HEAD(ring) & HEAD_ADDR;
 	/* If the head is still not zero, the ring is dead */
@@ -692,6 +692,17 @@ int intel_wait_ring_buffer(struct drm_device *dev,
 {
 	unsigned long end;
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 head;
+
+	head = intel_read_status_page(ring, 4);
+	if (head) {
+		ring->head = head & HEAD_ADDR;
+		ring->space = ring->head - (ring->tail + 8);
+		if (ring->space < 0)
+			ring->space += ring->size;
+		if (ring->space >= n)
+			return 0;
+	}
 
 	trace_i915_ring_wait_begin (dev);
 	end = jiffies + 3 * HZ;

From cd045cb42a266882ac24bc21a3a8d03683c72954 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Thu, 4 Nov 2010 11:05:05 -0700
Subject: [PATCH 0227/1066] ceph: fix rdcache_gen usage and invalidate

We used to use rdcache_gen to indicate whether we "might" have cached
pages.  Now we just look at the mapping to determine that.  However, some
old behavior remains from that transition.

First, rdcache_gen == 0 no longer means we have no pages.  That can happen
at any time (presumably when we carry FILE_CACHE).  We should not reset it
to zero, and we should not check that it is zero.

That means that the only purpose for rdcache_revoking is to resolve races
between new issues of FILE_CACHE and an async invalidate.  If they are
equal, we should invalidate.  On success, we decrement rdcache_revoking,
so that it is no longer equal to rdcache_gen.  Similarly, if we success
in doing a sync invalidate, set revoking = gen - 1.  (This is a small
optimization to avoid doing unnecessary invalidate work and does not
affect correctness.)

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/caps.c  |  4 ++--
 fs/ceph/inode.c | 16 +++++++---------
 fs/ceph/super.h |  4 +---
 3 files changed, 10 insertions(+), 14 deletions(-)

diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 04b207b0c842..60d27bc9eb83 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -1430,8 +1430,8 @@ static int try_nonblocking_invalidate(struct inode *inode)
 	    invalidating_gen == ci->i_rdcache_gen) {
 		/* success. */
 		dout("try_nonblocking_invalidate %p success\n", inode);
-		ci->i_rdcache_gen = 0;
-		ci->i_rdcache_revoking = 0;
+		/* save any racing async invalidate some trouble */
+		ci->i_rdcache_revoking = ci->i_rdcache_gen - 1;
 		return 0;
 	}
 	dout("try_nonblocking_invalidate %p failed\n", inode);
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 0a49ffde5bcb..5a9f907b805e 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -1394,11 +1394,8 @@ static void ceph_invalidate_work(struct work_struct *work)
 	spin_lock(&inode->i_lock);
 	dout("invalidate_pages %p gen %d revoking %d\n", inode,
 	     ci->i_rdcache_gen, ci->i_rdcache_revoking);
-	if (ci->i_rdcache_gen == 0 ||
-	    ci->i_rdcache_revoking != ci->i_rdcache_gen) {
-		BUG_ON(ci->i_rdcache_revoking > ci->i_rdcache_gen);
+	if (ci->i_rdcache_revoking != ci->i_rdcache_gen) {
 		/* nevermind! */
-		ci->i_rdcache_revoking = 0;
 		spin_unlock(&inode->i_lock);
 		goto out;
 	}
@@ -1408,15 +1405,16 @@ static void ceph_invalidate_work(struct work_struct *work)
 	ceph_invalidate_nondirty_pages(inode->i_mapping);
 
 	spin_lock(&inode->i_lock);
-	if (orig_gen == ci->i_rdcache_gen) {
+	if (orig_gen == ci->i_rdcache_gen &&
+	    orig_gen == ci->i_rdcache_revoking) {
 		dout("invalidate_pages %p gen %d successful\n", inode,
 		     ci->i_rdcache_gen);
-		ci->i_rdcache_gen = 0;
-		ci->i_rdcache_revoking = 0;
+		ci->i_rdcache_revoking--;
 		check = 1;
 	} else {
-		dout("invalidate_pages %p gen %d raced, gen now %d\n",
-		     inode, orig_gen, ci->i_rdcache_gen);
+		dout("invalidate_pages %p gen %d raced, now %d revoking %d\n",
+		     inode, orig_gen, ci->i_rdcache_gen,
+		     ci->i_rdcache_revoking);
 	}
 	spin_unlock(&inode->i_lock);
 
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index 1886294e12f7..7f01728a4657 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -293,9 +293,7 @@ struct ceph_inode_info {
 	int i_rd_ref, i_rdcache_ref, i_wr_ref;
 	int i_wrbuffer_ref, i_wrbuffer_ref_head;
 	u32 i_shared_gen;       /* increment each time we get FILE_SHARED */
-	u32 i_rdcache_gen;      /* we increment this each time we get
-				   FILE_CACHE.  If it's non-zero, we
-				   _may_ have cached pages. */
+	u32 i_rdcache_gen;      /* incremented each time we get FILE_CACHE. */
 	u32 i_rdcache_revoking; /* RDCACHE gen to async invalidate, if any */
 
 	struct list_head i_unsafe_writes; /* uncommitted sync writes */

From cb4276cca4695670916a82e359f2e3776f0a9138 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Mon, 8 Nov 2010 07:28:52 -0800
Subject: [PATCH 0228/1066] ceph: fix uid/gid on resent mds requests

MDS requests can be rebuilt and resent in non-process context, but were
filling in uid/gid from current_fsuid/gid.  Put that information in the
request struct on request setup.

This fixes incorrect (and root) uid/gid getting set for requests that
are forwarded between MDSs, usually due to metadata migrations.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/mds_client.c | 7 +++++--
 fs/ceph/mds_client.h | 2 ++
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 3142b15940c2..d22fbbef1959 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -529,6 +529,9 @@ static void __register_request(struct ceph_mds_client *mdsc,
 	ceph_mdsc_get_request(req);
 	__insert_request(mdsc, req);
 
+	req->r_uid = current_fsuid();
+	req->r_gid = current_fsgid();
+
 	if (dir) {
 		struct ceph_inode_info *ci = ceph_inode(dir);
 
@@ -1588,8 +1591,8 @@ static struct ceph_msg *create_request_message(struct ceph_mds_client *mdsc,
 
 	head->mdsmap_epoch = cpu_to_le32(mdsc->mdsmap->m_epoch);
 	head->op = cpu_to_le32(req->r_op);
-	head->caller_uid = cpu_to_le32(current_fsuid());
-	head->caller_gid = cpu_to_le32(current_fsgid());
+	head->caller_uid = cpu_to_le32(req->r_uid);
+	head->caller_gid = cpu_to_le32(req->r_gid);
 	head->args = req->r_args;
 
 	ceph_encode_filepath(&p, end, ino1, path1);
diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h
index d66d63c72355..9341fd4f1432 100644
--- a/fs/ceph/mds_client.h
+++ b/fs/ceph/mds_client.h
@@ -170,6 +170,8 @@ struct ceph_mds_request {
 
 	union ceph_mds_request_args r_args;
 	int r_fmode;        /* file mode, if expecting cap */
+	uid_t r_uid;
+	gid_t r_gid;
 
 	/* for choosing which mds to send this request to */
 	int r_direct_mode;

From 1ebd0061ededeb8b495360a772d0b885dd3e036e Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Mon, 8 Nov 2010 13:24:58 +0800
Subject: [PATCH 0229/1066] ASoC: Return proper error if snd_soc_register_dais
 fails in psc_i2s_of_probe

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/fsl/mpc5200_psc_i2s.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c
index 74ffed41340f..9018fa5bf0db 100644
--- a/sound/soc/fsl/mpc5200_psc_i2s.c
+++ b/sound/soc/fsl/mpc5200_psc_i2s.c
@@ -160,7 +160,7 @@ static int __devinit psc_i2s_of_probe(struct platform_device *op,
 	rc = snd_soc_register_dais(&op->dev, psc_i2s_dai, ARRAY_SIZE(psc_i2s_dai));
 	if (rc != 0) {
 		pr_err("Failed to register DAI\n");
-		return 0;
+		return rc;
 	}
 
 	psc_dma = dev_get_drvdata(&op->dev);

From b0fc7b840926654a3a6eaf0f41f3a4da33441d3d Mon Sep 17 00:00:00 2001
From: Marek Belisko <marek.belisko@gmail.com>
Date: Mon, 8 Nov 2010 13:14:51 +0100
Subject: [PATCH 0230/1066] ASoC: s3c24xx: Fix compilation problem for mini2440

When make mini2440_defconfig compilation end with undefined
references to DMA functions. There was missing selection
for S3C2410_DMA when compile ASoC audio for S3C24xx CPU.
Tested on mini2440 board.

Signed-off-by: Marek Belisko <marek.belisko@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/s3c24xx/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 8a6b53ccd203..d85bf8a0abb2 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -2,6 +2,7 @@ config SND_S3C24XX_SOC
 	tristate "SoC Audio for the Samsung S3CXXXX chips"
 	depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210
 	select S3C64XX_DMA if ARCH_S3C64XX
+	select S3C2410_DMA if ARCH_S3C2410
 	help
 	  Say Y or M if you want to add support for codecs attached to
 	  the S3C24XX AC97 or I2S interfaces. You will also need to

From 1688c3d6000b1183bcb604c8c85f742a579990e5 Mon Sep 17 00:00:00 2001
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Date: Sun, 31 Oct 2010 17:04:09 -0400
Subject: [PATCH 0231/1066] MAINTAINERS: Update mailing list name for Xen
 pieces.

While the 'xen-devel@lists.xen.org' is more apt, it is not yet
ready. Revert the name back to the old lists.xensource.com for
right now.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0094224ca79b..acf13f2f9f78 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6613,7 +6613,7 @@ F:	drivers/xen/*swiotlb*
 XEN HYPERVISOR INTERFACE
 M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L:	xen-devel@lists.xen.org
+L:	xen-devel@lists.xensource.com
 L:	virtualization@lists.osdl.org
 S:	Supported
 F:	arch/x86/xen/

From 07cf2a64c2ad3408a0e12aa4cd6040b30c09381d Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Sat, 6 Nov 2010 10:06:49 +0100
Subject: [PATCH 0232/1066] xen: fix memory leak in Xen PCI MSI/MSI-X
 allocator.

Stanse found that xen_setup_msi_irqs leaks memory when
xen_allocate_pirq fails. Free the memory in that fail path.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xensource.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
---
 arch/x86/pci/xen.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 117f5b8daf75..d7b5109f7a9c 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -147,8 +147,10 @@ static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 		irq = xen_allocate_pirq(v[i], 0, /* not sharable */
 			(type == PCI_CAP_ID_MSIX) ?
 			"pcifront-msi-x" : "pcifront-msi");
-		if (irq < 0)
-			return -1;
+		if (irq < 0) {
+			ret = -1;
+			goto free;
+		}
 
 		ret = set_irq_msi(irq, msidesc);
 		if (ret)
@@ -164,7 +166,7 @@ error:
 	if (ret == -ENODEV)
 		dev_err(&dev->dev, "Xen PCI frontend has not registered" \
 			" MSI/MSI-X support!\n");
-
+free:
 	kfree(v);
 	return ret;
 }

From c8ac3902fb7a98c45ed54d98ad6f1c8168f47021 Mon Sep 17 00:00:00 2001
From: Jesper Juhl <jj@chaosbits.net>
Date: Sat, 30 Oct 2010 14:51:30 +0200
Subject: [PATCH 0233/1066] xen-pcifront: Remove duplicate inclusion of
 headers.

In drivers/pci/xen-pcifront.c the xen/xenbus.h header is included twice -
once is enough.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 drivers/pci/xen-pcifront.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c
index a87c4985326e..05792732718e 100644
--- a/drivers/pci/xen-pcifront.c
+++ b/drivers/pci/xen-pcifront.c
@@ -13,7 +13,6 @@
 #include <linux/spinlock.h>
 #include <linux/pci.h>
 #include <linux/msi.h>
-#include <xen/xenbus.h>
 #include <xen/interface/io/pciif.h>
 #include <asm/xen/pci.h>
 #include <linux/interrupt.h>

From 2a63dd7275b2278bd7e9203f74b9aa4f07e82a7a Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 4 Nov 2010 15:31:30 +0100
Subject: [PATCH 0234/1066] xen-pcifront: fix PCI reference leak

Stanse found that when pdev is found and has no driver a reference is
leaked in pcifront_common_process. So add pci_dev_put there. For the
pdev == NULL case, pci_dev_put(NULL) is fine.

[v2: Updated to not dereference pcidev->dev per Milton's observation]

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Milton Miller <miltonm@bga.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/xen-pcifront.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c
index 05792732718e..3a5a6fcc0ead 100644
--- a/drivers/pci/xen-pcifront.c
+++ b/drivers/pci/xen-pcifront.c
@@ -575,8 +575,9 @@ static pci_ers_result_t pcifront_common_process(int cmd,
 
 	pcidev = pci_get_bus_and_slot(bus, devfn);
 	if (!pcidev || !pcidev->driver) {
-		dev_err(&pcidev->dev,
-			"device or driver is NULL\n");
+		dev_err(&pdev->xdev->dev, "device or AER driver is NULL\n");
+		if (pcidev)
+			pci_dev_put(pcidev);
 		return result;
 	}
 	pdrv = pcidev->driver;

From 8bd59e0188c04f6540f00e13f633f22e4804ce06 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Mon, 8 Nov 2010 09:23:12 -0800
Subject: [PATCH 0235/1066] ceph: fix version check on racing inode updates

We may get updates on the same inode from multiple MDSs; generally we only
pay attention if the update is newer than what we already have.  The
exception is when an MDS sense unstable information, in which case we
always update.

The old > check got this wrong when our version was odd (e.g. 3) and the
reply version was even (e.g. 2): the older stale (v2) info would be
applied.  Fixed and clarified the comment.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/inode.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 5a9f907b805e..425c5b1f944e 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -567,12 +567,17 @@ static int fill_inode(struct inode *inode,
 
 	/*
 	 * provided version will be odd if inode value is projected,
-	 * even if stable.  skip the update if we have a newer info
-	 * (e.g., due to inode info racing form multiple MDSs), or if
-	 * we are getting projected (unstable) inode info.
+	 * even if stable.  skip the update if we have newer stable
+	 * info (ours>=theirs, e.g. due to racing mds replies), unless
+	 * we are getting projected (unstable) info (in which case the
+	 * version is odd, and we want ours>theirs).
+	 *   us   them
+	 *   2    2     skip
+	 *   3    2     skip
+	 *   3    3     update
 	 */
 	if (le64_to_cpu(info->version) > 0 &&
-	    (ci->i_version & ~1) > le64_to_cpu(info->version))
+	    (ci->i_version & ~1) >= le64_to_cpu(info->version))
 		goto no_change;
 
 	issued = __ceph_caps_issued(ci, &implemented);

From d8672d64b88cdb7aa8139fb6d218f40b8cbf60af Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Mon, 8 Nov 2010 09:24:34 -0800
Subject: [PATCH 0236/1066] ceph: fix update of ctime from MDS

The client can have a newer ctime than the MDS due to AUTH_EXCL and
XATTR_EXCL caps as well; update the check in ceph_fill_file_time
appropriately.

This fixes cases where ctime/mtime goes backward under the right sequence
of local updates (e.g. chmod) and mds replies (e.g. subsequent stat that
goes to the MDS).

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/inode.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 425c5b1f944e..7bc0fbd26af2 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -471,7 +471,9 @@ void ceph_fill_file_time(struct inode *inode, int issued,
 
 	if (issued & (CEPH_CAP_FILE_EXCL|
 		      CEPH_CAP_FILE_WR|
-		      CEPH_CAP_FILE_BUFFER)) {
+		      CEPH_CAP_FILE_BUFFER|
+		      CEPH_CAP_AUTH_EXCL|
+		      CEPH_CAP_XATTR_EXCL)) {
 		if (timespec_compare(ctime, &inode->i_ctime) > 0) {
 			dout("ctime %ld.%09ld -> %ld.%09ld inc w/ cap\n",
 			     inode->i_ctime.tv_sec, inode->i_ctime.tv_nsec,
@@ -511,7 +513,7 @@ void ceph_fill_file_time(struct inode *inode, int issued,
 			warn = 1;
 		}
 	} else {
-		/* we have no write caps; whatever the MDS says is true */
+		/* we have no write|excl caps; whatever the MDS says is true */
 		if (ceph_seq_cmp(time_warp_seq, ci->i_time_warp_seq) >= 0) {
 			inode->i_ctime = *ctime;
 			inode->i_mtime = *mtime;

From f7ad6d2e9201a6e1c9ee6530a291452eb695feb8 Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Mon, 8 Nov 2010 13:43:33 -0500
Subject: [PATCH 0237/1066] ext4: handle writeback of inodes which are being
 freed

The following BUG can occur when an inode which is getting freed when
it still has dirty pages outstanding, and it gets deleted (in this
because it was the target of a rename).  In ordered mode, we need to
make sure the data pages are written just in case we crash before the
rename (or unlink) is committed.  If the inode is being freed then
when we try to igrab the inode, we end up tripping the BUG_ON at
fs/ext4/page-io.c:146.

To solve this problem, we need to keep track of the number of io
callbacks which are pending, and avoid destroying the inode until they
have all been completed.  That way we don't have to bump the inode
count to keep the inode from being destroyed; an approach which
doesn't work because the count could have already been dropped down to
zero before the inode writeback has started (at which point we're not
allowed to bump the count back up to 1, since it's already started
getting freed).

Thanks to Dave Chinner for suggesting this approach, which is also
used by XFS.

  kernel BUG at /scratch_space/linux-2.6/fs/ext4/page-io.c:146!
  Call Trace:
   [<ffffffff811075b1>] ext4_bio_write_page+0x172/0x307
   [<ffffffff811033a7>] mpage_da_submit_io+0x2f9/0x37b
   [<ffffffff811068d7>] mpage_da_map_and_submit+0x2cc/0x2e2
   [<ffffffff811069b3>] mpage_add_bh_to_extent+0xc6/0xd5
   [<ffffffff81106c66>] write_cache_pages_da+0x2a4/0x3ac
   [<ffffffff81107044>] ext4_da_writepages+0x2d6/0x44d
   [<ffffffff81087910>] do_writepages+0x1c/0x25
   [<ffffffff810810a4>] __filemap_fdatawrite_range+0x4b/0x4d
   [<ffffffff810815f5>] filemap_fdatawrite_range+0xe/0x10
   [<ffffffff81122a2e>] jbd2_journal_begin_ordered_truncate+0x7b/0xa2
   [<ffffffff8110615d>] ext4_evict_inode+0x57/0x24c
   [<ffffffff810c14a3>] evict+0x22/0x92
   [<ffffffff810c1a3d>] iput+0x212/0x249
   [<ffffffff810bdf16>] dentry_iput+0xa1/0xb9
   [<ffffffff810bdf6b>] d_kill+0x3d/0x5d
   [<ffffffff810be613>] dput+0x13a/0x147
   [<ffffffff810b990d>] sys_renameat+0x1b5/0x258
   [<ffffffff81145f71>] ? _atomic_dec_and_lock+0x2d/0x4c
   [<ffffffff810b2950>] ? cp_new_stat+0xde/0xea
   [<ffffffff810b29c1>] ? sys_newlstat+0x2d/0x38
   [<ffffffff810b99c6>] sys_rename+0x16/0x18
   [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b

Reported-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Nick Bowler <nbowler@elliptictech.com>
---
 fs/ext4/ext4.h    |  2 ++
 fs/ext4/page-io.c | 59 +++++++++++++++++++++++++++--------------------
 fs/ext4/super.c   |  2 ++
 3 files changed, 38 insertions(+), 25 deletions(-)

diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 8b5dd6369f82..670d1343f914 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -858,6 +858,7 @@ struct ext4_inode_info {
 	spinlock_t i_completed_io_lock;
 	/* current io_end structure for async DIO write*/
 	ext4_io_end_t *cur_aio_dio;
+	atomic_t i_ioend_count;	/* Number of outstanding io_end structs */
 
 	/*
 	 * Transactions that contain inode's metadata needed to complete
@@ -2060,6 +2061,7 @@ extern int ext4_move_extents(struct file *o_filp, struct file *d_filp,
 /* page-io.c */
 extern int __init ext4_init_pageio(void);
 extern void ext4_exit_pageio(void);
+extern void ext4_ioend_wait(struct inode *);
 extern void ext4_free_io_end(ext4_io_end_t *io);
 extern ext4_io_end_t *ext4_init_io_end(struct inode *inode, gfp_t flags);
 extern int ext4_end_io_nolock(ext4_io_end_t *io);
diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c
index 46a7d6a9d976..a24c8cca7370 100644
--- a/fs/ext4/page-io.c
+++ b/fs/ext4/page-io.c
@@ -32,8 +32,14 @@
 
 static struct kmem_cache *io_page_cachep, *io_end_cachep;
 
+#define WQ_HASH_SZ		37
+#define to_ioend_wq(v)	(&ioend_wq[((unsigned long)v) % WQ_HASH_SZ])
+static wait_queue_head_t ioend_wq[WQ_HASH_SZ];
+
 int __init ext4_init_pageio(void)
 {
+	int i;
+
 	io_page_cachep = KMEM_CACHE(ext4_io_page, SLAB_RECLAIM_ACCOUNT);
 	if (io_page_cachep == NULL)
 		return -ENOMEM;
@@ -42,6 +48,8 @@ int __init ext4_init_pageio(void)
 		kmem_cache_destroy(io_page_cachep);
 		return -ENOMEM;
 	}
+	for (i = 0; i < WQ_HASH_SZ; i++)
+		init_waitqueue_head(&ioend_wq[i]);
 
 	return 0;
 }
@@ -52,9 +60,17 @@ void ext4_exit_pageio(void)
 	kmem_cache_destroy(io_page_cachep);
 }
 
+void ext4_ioend_wait(struct inode *inode)
+{
+	wait_queue_head_t *wq = to_ioend_wq(inode);
+
+	wait_event(*wq, (atomic_read(&EXT4_I(inode)->i_ioend_count) == 0));
+}
+
 void ext4_free_io_end(ext4_io_end_t *io)
 {
 	int i;
+	wait_queue_head_t *wq;
 
 	BUG_ON(!io);
 	if (io->page)
@@ -69,7 +85,10 @@ void ext4_free_io_end(ext4_io_end_t *io)
 		}
 	}
 	io->num_io_pages = 0;
-	iput(io->inode);
+	wq = to_ioend_wq(io->inode);
+	if (atomic_dec_and_test(&EXT4_I(io->inode)->i_ioend_count) &&
+	    waitqueue_active(wq))
+		wake_up_all(wq);
 	kmem_cache_free(io_end_cachep, io);
 }
 
@@ -142,8 +161,8 @@ ext4_io_end_t *ext4_init_io_end(struct inode *inode, gfp_t flags)
 	io = kmem_cache_alloc(io_end_cachep, flags);
 	if (io) {
 		memset(io, 0, sizeof(*io));
-		io->inode = igrab(inode);
-		BUG_ON(!io->inode);
+		atomic_inc(&EXT4_I(inode)->i_ioend_count);
+		io->inode = inode;
 		INIT_WORK(&io->work, ext4_end_io_work);
 		INIT_LIST_HEAD(&io->list);
 	}
@@ -171,35 +190,15 @@ static void ext4_end_bio(struct bio *bio, int error)
 	struct workqueue_struct *wq;
 	struct inode *inode;
 	unsigned long flags;
-	ext4_fsblk_t err_block;
 	int i;
 
 	BUG_ON(!io_end);
-	inode = io_end->inode;
 	bio->bi_private = NULL;
 	bio->bi_end_io = NULL;
 	if (test_bit(BIO_UPTODATE, &bio->bi_flags))
 		error = 0;
-	err_block = bio->bi_sector >> (inode->i_blkbits - 9);
 	bio_put(bio);
 
-	if (!(inode->i_sb->s_flags & MS_ACTIVE)) {
-		pr_err("sb umounted, discard end_io request for inode %lu\n",
-			io_end->inode->i_ino);
-		ext4_free_io_end(io_end);
-		return;
-	}
-
-	if (error) {
-		io_end->flag |= EXT4_IO_END_ERROR;
-		ext4_warning(inode->i_sb, "I/O error writing to inode %lu "
-			     "(offset %llu size %ld starting block %llu)",
-			     inode->i_ino,
-			     (unsigned long long) io_end->offset,
-			     (long) io_end->size,
-			     (unsigned long long) err_block);
-	}
-
 	for (i = 0; i < io_end->num_io_pages; i++) {
 		struct page *page = io_end->pages[i]->p_page;
 		struct buffer_head *bh, *head;
@@ -254,8 +253,19 @@ static void ext4_end_bio(struct bio *bio, int error)
 		if (!partial_write)
 			SetPageUptodate(page);
 	}
-
 	io_end->num_io_pages = 0;
+	inode = io_end->inode;
+
+	if (error) {
+		io_end->flag |= EXT4_IO_END_ERROR;
+		ext4_warning(inode->i_sb, "I/O error writing to inode %lu "
+			     "(offset %llu size %ld starting block %llu)",
+			     inode->i_ino,
+			     (unsigned long long) io_end->offset,
+			     (long) io_end->size,
+			     (unsigned long long)
+			     bio->bi_sector >> (inode->i_blkbits - 9));
+	}
 
 	/* Add the io_end to per-inode completed io list*/
 	spin_lock_irqsave(&EXT4_I(inode)->i_completed_io_lock, flags);
@@ -305,7 +315,6 @@ static int io_submit_init(struct ext4_io_submit *io,
 	bio->bi_private = io->io_end = io_end;
 	bio->bi_end_io = ext4_end_bio;
 
-	io_end->inode = inode;
 	io_end->offset = (page->index << PAGE_CACHE_SHIFT) + bh_offset(bh);
 
 	io->io_bio = bio;
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 04352e9729d0..45653af88953 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -828,12 +828,14 @@ static struct inode *ext4_alloc_inode(struct super_block *sb)
 	ei->cur_aio_dio = NULL;
 	ei->i_sync_tid = 0;
 	ei->i_datasync_tid = 0;
+	atomic_set(&ei->i_ioend_count, 0);
 
 	return &ei->vfs_inode;
 }
 
 static void ext4_destroy_inode(struct inode *inode)
 {
+	ext4_ioend_wait(inode);
 	if (!list_empty(&(EXT4_I(inode)->i_orphan))) {
 		ext4_msg(inode->i_sb, KERN_ERR,
 			 "Inode %lu (%p): orphan list check failed!",

From 83668e7141c7a0aa4035bde94344b81f9cf966ab Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Mon, 8 Nov 2010 13:45:33 -0500
Subject: [PATCH 0238/1066] ext4: fix potential race when freeing ext4_io_page
 structures

Use an atomic_t and make sure we don't free the structure while we
might still be submitting I/O for that page.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/ext4.h    |  2 +-
 fs/ext4/page-io.c | 38 +++++++++++++++-----------------------
 2 files changed, 16 insertions(+), 24 deletions(-)

diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 670d1343f914..6a5edea2d70b 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -177,7 +177,7 @@ struct mpage_da_data {
 
 struct ext4_io_page {
 	struct page	*p_page;
-	int		p_count;
+	atomic_t	p_count;
 };
 
 #define MAX_IO_PAGES 128
diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c
index a24c8cca7370..7f5451cd1d38 100644
--- a/fs/ext4/page-io.c
+++ b/fs/ext4/page-io.c
@@ -67,6 +67,15 @@ void ext4_ioend_wait(struct inode *inode)
 	wait_event(*wq, (atomic_read(&EXT4_I(inode)->i_ioend_count) == 0));
 }
 
+static void put_io_page(struct ext4_io_page *io_page)
+{
+	if (atomic_dec_and_test(&io_page->p_count)) {
+		end_page_writeback(io_page->p_page);
+		put_page(io_page->p_page);
+		kmem_cache_free(io_page_cachep, io_page);
+	}
+}
+
 void ext4_free_io_end(ext4_io_end_t *io)
 {
 	int i;
@@ -75,15 +84,8 @@ void ext4_free_io_end(ext4_io_end_t *io)
 	BUG_ON(!io);
 	if (io->page)
 		put_page(io->page);
-	for (i = 0; i < io->num_io_pages; i++) {
-		if (--io->pages[i]->p_count == 0) {
-			struct page *page = io->pages[i]->p_page;
-
-			end_page_writeback(page);
-			put_page(page);
-			kmem_cache_free(io_page_cachep, io->pages[i]);
-		}
-	}
+	for (i = 0; i < io->num_io_pages; i++)
+		put_io_page(io->pages[i]);
 	io->num_io_pages = 0;
 	wq = to_ioend_wq(io->inode);
 	if (atomic_dec_and_test(&EXT4_I(io->inode)->i_ioend_count) &&
@@ -235,13 +237,7 @@ static void ext4_end_bio(struct bio *bio, int error)
 			} while (bh != head);
 		}
 
-		if (--io_end->pages[i]->p_count == 0) {
-			struct page *page = io_end->pages[i]->p_page;
-
-			end_page_writeback(page);
-			put_page(page);
-			kmem_cache_free(io_page_cachep, io_end->pages[i]);
-		}
+		put_io_page(io_end->pages[i]);
 
 		/*
 		 * If this is a partial write which happened to make
@@ -369,7 +365,7 @@ submit_and_retry:
 	if ((io_end->num_io_pages == 0) ||
 	    (io_end->pages[io_end->num_io_pages-1] != io_page)) {
 		io_end->pages[io_end->num_io_pages++] = io_page;
-		io_page->p_count++;
+		atomic_inc(&io_page->p_count);
 	}
 	return 0;
 }
@@ -398,7 +394,7 @@ int ext4_bio_write_page(struct ext4_io_submit *io,
 		return -ENOMEM;
 	}
 	io_page->p_page = page;
-	io_page->p_count = 0;
+	atomic_set(&io_page->p_count, 1);
 	get_page(page);
 
 	for (bh = head = page_buffers(page), block_start = 0;
@@ -430,10 +426,6 @@ int ext4_bio_write_page(struct ext4_io_submit *io,
 	 * PageWriteback bit from the page to prevent the system from
 	 * wedging later on.
 	 */
-	if (io_page->p_count == 0) {
-		put_page(page);
-		end_page_writeback(page);
-		kmem_cache_free(io_page_cachep, io_page);
-	}
+	put_io_page(io_page);
 	return ret;
 }

From 87009d86dc045d228e21242467a67a5f99347553 Mon Sep 17 00:00:00 2001
From: Dmitry Monakhov <dmonakhov@openvz.org>
Date: Mon, 8 Nov 2010 13:47:33 -0500
Subject: [PATCH 0239/1066] ext4: do not try to grab the s_umount semaphore in
 ext4_quota_off

It's not needed to sync the filesystem, and it fixes a lock_dep complaint.

Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
---
 fs/ext4/super.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 45653af88953..ee91e29ddf95 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -4570,12 +4570,10 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id,
 
 static int ext4_quota_off(struct super_block *sb, int type)
 {
-	/* Force all delayed allocation blocks to be allocated */
-	if (test_opt(sb, DELALLOC)) {
-		down_read(&sb->s_umount);
+	/* Force all delayed allocation blocks to be allocated.
+	 * Caller already holds s_umount sem */
+	if (test_opt(sb, DELALLOC))
 		sync_filesystem(sb);
-		up_read(&sb->s_umount);
-	}
 
 	return dquot_quota_off(sb, type);
 }

From b56ff9d397cecdaad6c98c9d57cc6fea475e1f50 Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Mon, 8 Nov 2010 13:49:33 -0500
Subject: [PATCH 0240/1066] ext4: Don't call sb_issue_discard() in
 ext4_free_blocks()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commit 5c521830cf (ext4: Support discard requests when running in
no-journal mode) attempts to add sb_issue_discard() for data blocks
(in data=writeback mode) and in no-journal mode.  Unfortunately, this
no longer works, because in commit dd3932eddf (block: remove
BLKDEV_IFL_WAIT), sb_issue_discard() only presents a synchronous
interface, and there are times when we call ext4_free_blocks() when we
are are holding a spinlock, or are otherwise in an atomic context.

For now, I've removed the call to sb_issue_discard() to prevent a
deadlock or (if spinlock debugging is enabled) failures like this:

BUG: scheduling while atomic: rc.sysinit/1376/0x00000002
Pid: 1376, comm: rc.sysinit Not tainted 2.6.36-ARCH #1
Call Trace:
[<ffffffff810397ce>] __schedule_bug+0x5e/0x70
[<ffffffff81403110>] schedule+0x950/0xa70
[<ffffffff81060bad>] ? insert_work+0x7d/0x90
[<ffffffff81060fbd>] ? queue_work_on+0x1d/0x30
[<ffffffff81061127>] ? queue_work+0x37/0x60
[<ffffffff8140377d>] schedule_timeout+0x21d/0x360
[<ffffffff812031c3>] ? generic_make_request+0x2c3/0x540
[<ffffffff81402680>] wait_for_common+0xc0/0x150
[<ffffffff81041490>] ? default_wake_function+0x0/0x10
[<ffffffff812034bc>] ? submit_bio+0x7c/0x100
[<ffffffff810680a0>] ? wake_bit_function+0x0/0x40
[<ffffffff814027b8>] wait_for_completion+0x18/0x20
[<ffffffff8120a969>] blkdev_issue_discard+0x1b9/0x210
[<ffffffff811ba03e>] ext4_free_blocks+0x68e/0xb60
[<ffffffff811b1650>] ? __ext4_handle_dirty_metadata+0x110/0x120
[<ffffffff811b098c>] ext4_ext_truncate+0x8cc/0xa70
[<ffffffff810d713e>] ? pagevec_lookup+0x1e/0x30
[<ffffffff81191618>] ext4_truncate+0x178/0x5d0
[<ffffffff810eacbb>] ? unmap_mapping_range+0xab/0x280
[<ffffffff810d8976>] vmtruncate+0x56/0x70
[<ffffffff811925cb>] ext4_setattr+0x14b/0x460
[<ffffffff811319e4>] notify_change+0x194/0x380
[<ffffffff81117f80>] do_truncate+0x60/0x90
[<ffffffff811e08fa>] ? security_inode_permission+0x1a/0x20
[<ffffffff811eaec1>] ? tomoyo_path_truncate+0x11/0x20
[<ffffffff81127539>] do_last+0x5d9/0x770
[<ffffffff811278bd>] do_filp_open+0x1ed/0x680
[<ffffffff8140644f>] ? page_fault+0x1f/0x30
[<ffffffff81132bfc>] ? alloc_fd+0xec/0x140
[<ffffffff81118db1>] do_sys_open+0x61/0x120
[<ffffffff81118e8b>] sys_open+0x1b/0x20
[<ffffffff81002e6b>] system_call_fastpath+0x16/0x1b

https://bugzilla.kernel.org/show_bug.cgi?id=22302

Reported-by: Mathias Burén <mathias.buren@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: jiayingz@google.com
---
 fs/ext4/mballoc.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index c58eba34724a..5b4d4e3a4d58 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4640,8 +4640,6 @@ do_more:
 		 * with group lock held. generate_buddy look at
 		 * them with group lock_held
 		 */
-		if (test_opt(sb, DISCARD))
-			ext4_issue_discard(sb, block_group, bit, count);
 		ext4_lock_group(sb, block_group);
 		mb_clear_bits(bitmap_bh->b_data, bit, count);
 		mb_free_blocks(inode, &e4b, bit, count);

From 7ff9c073dd4d7200399076554f7ab9b876f196f6 Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Mon, 8 Nov 2010 13:51:33 -0500
Subject: [PATCH 0241/1066] ext4: Add new ext4 inode tracepoints

Add ext4_evict_inode, ext4_drop_inode, ext4_mark_inode_dirty, and
ext4_begin_ordered_truncate()

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/inode.c             |  3 ++
 fs/ext4/super.c             | 10 ++++
 include/trace/events/ext4.h | 97 +++++++++++++++++++++++++++++++++++++
 3 files changed, 110 insertions(+)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 191616470466..846e1e9db434 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -53,6 +53,7 @@
 static inline int ext4_begin_ordered_truncate(struct inode *inode,
 					      loff_t new_size)
 {
+	trace_ext4_begin_ordered_truncate(inode, new_size);
 	return jbd2_journal_begin_ordered_truncate(
 					EXT4_SB(inode->i_sb)->s_journal,
 					&EXT4_I(inode)->jinode,
@@ -178,6 +179,7 @@ void ext4_evict_inode(struct inode *inode)
 	handle_t *handle;
 	int err;
 
+	trace_ext4_evict_inode(inode);
 	if (inode->i_nlink) {
 		truncate_inode_pages(&inode->i_data, 0);
 		goto no_delete;
@@ -5649,6 +5651,7 @@ int ext4_mark_inode_dirty(handle_t *handle, struct inode *inode)
 	int err, ret;
 
 	might_sleep();
+	trace_ext4_mark_inode_dirty(inode, _RET_IP_);
 	err = ext4_reserve_inode_write(handle, inode, &iloc);
 	if (ext4_handle_valid(handle) &&
 	    EXT4_I(inode)->i_extra_isize < sbi->s_want_extra_isize &&
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index ee91e29ddf95..61182fe6254e 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -833,6 +833,14 @@ static struct inode *ext4_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
+static int ext4_drop_inode(struct inode *inode)
+{
+	int drop = generic_drop_inode(inode);
+
+	trace_ext4_drop_inode(inode, drop);
+	return drop;
+}
+
 static void ext4_destroy_inode(struct inode *inode)
 {
 	ext4_ioend_wait(inode);
@@ -1175,6 +1183,7 @@ static const struct super_operations ext4_sops = {
 	.destroy_inode	= ext4_destroy_inode,
 	.write_inode	= ext4_write_inode,
 	.dirty_inode	= ext4_dirty_inode,
+	.drop_inode	= ext4_drop_inode,
 	.evict_inode	= ext4_evict_inode,
 	.put_super	= ext4_put_super,
 	.sync_fs	= ext4_sync_fs,
@@ -1196,6 +1205,7 @@ static const struct super_operations ext4_nojournal_sops = {
 	.destroy_inode	= ext4_destroy_inode,
 	.write_inode	= ext4_write_inode,
 	.dirty_inode	= ext4_dirty_inode,
+	.drop_inode	= ext4_drop_inode,
 	.evict_inode	= ext4_evict_inode,
 	.write_super	= ext4_write_super,
 	.put_super	= ext4_put_super,
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index 289010d3270b..e5e345fb2a5c 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -98,6 +98,103 @@ TRACE_EVENT(ext4_allocate_inode,
 		  (unsigned long) __entry->dir, __entry->mode)
 );
 
+TRACE_EVENT(ext4_evict_inode,
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode),
+
+	TP_STRUCT__entry(
+		__field(	int,   dev_major                )
+		__field(	int,   dev_minor                )
+		__field(	ino_t,	ino			)
+		__field(	int,	nlink			)
+	),
+
+	TP_fast_assign(
+		__entry->dev_major = MAJOR(inode->i_sb->s_dev);
+		__entry->dev_minor = MINOR(inode->i_sb->s_dev);
+		__entry->ino	= inode->i_ino;
+		__entry->nlink	= inode->i_nlink;
+	),
+
+	TP_printk("dev %d,%d ino %lu nlink %d",
+		  __entry->dev_major, __entry->dev_minor,
+		  (unsigned long) __entry->ino, __entry->nlink)
+);
+
+TRACE_EVENT(ext4_drop_inode,
+	TP_PROTO(struct inode *inode, int drop),
+
+	TP_ARGS(inode, drop),
+
+	TP_STRUCT__entry(
+		__field(	int,	dev_major		)
+		__field(	int,	dev_minor		)
+		__field(	ino_t,	ino			)
+		__field(	int,	drop			)
+	),
+
+	TP_fast_assign(
+		__entry->dev_major = MAJOR(inode->i_sb->s_dev);
+		__entry->dev_minor = MINOR(inode->i_sb->s_dev);
+		__entry->ino	= inode->i_ino;
+		__entry->drop	= drop;
+	),
+
+	TP_printk("dev %d,%d ino %lu drop %d",
+		  __entry->dev_major, __entry->dev_minor,
+		  (unsigned long) __entry->ino, __entry->drop)
+);
+
+TRACE_EVENT(ext4_mark_inode_dirty,
+	TP_PROTO(struct inode *inode, unsigned long IP),
+
+	TP_ARGS(inode, IP),
+
+	TP_STRUCT__entry(
+		__field(	int,	dev_major		)
+		__field(	int,	dev_minor		)
+		__field(	ino_t,	ino			)
+		__field(unsigned long,	ip			)
+	),
+
+	TP_fast_assign(
+		__entry->dev_major = MAJOR(inode->i_sb->s_dev);
+		__entry->dev_minor = MINOR(inode->i_sb->s_dev);
+		__entry->ino	= inode->i_ino;
+		__entry->ip	= IP;
+	),
+
+	TP_printk("dev %d,%d ino %lu caller %pF",
+		  __entry->dev_major, __entry->dev_minor,
+		  (unsigned long) __entry->ino, (void *)__entry->ip)
+);
+
+TRACE_EVENT(ext4_begin_ordered_truncate,
+	TP_PROTO(struct inode *inode, loff_t new_size),
+
+	TP_ARGS(inode, new_size),
+
+	TP_STRUCT__entry(
+		__field(	int,	dev_major		)
+		__field(	int,	dev_minor		)
+		__field(	ino_t,	ino			)
+		__field(	loff_t,	new_size		)
+	),
+
+	TP_fast_assign(
+		__entry->dev_major	= MAJOR(inode->i_sb->s_dev);
+		__entry->dev_minor	= MINOR(inode->i_sb->s_dev);
+		__entry->ino		= inode->i_ino;
+		__entry->new_size	= new_size;
+	),
+
+	TP_printk("dev %d,%d ino %lu new_size %lld",
+		  __entry->dev_major, __entry->dev_minor,
+		  (unsigned long) __entry->ino,
+		  (long long) __entry->new_size)
+);
+
 DECLARE_EVENT_CLASS(ext4__write_begin,
 
 	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,

From 618763958b2291a09057dbfa553da6ded93dcfad Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Mon, 8 Nov 2010 07:28:32 -0500
Subject: [PATCH 0242/1066] cifs: make cifs_ioctl handle NULL
 filp->private_data correctly

Commit 13cfb7334e made cifs_ioctl use the tlink attached to the
cifsFileInfo for a filp. This ignores the case of an open directory
however, which in CIFS can have a NULL private_data until a readdir
is done on it.

This patch re-adds the NULL pointer checks that were removed in commit
50ae28f01 and moves the setting of tcon and "caps" variables lower.

Long term, a better fix would be to establish a f_op->open routine for
directories that populates that field at open time, but that requires
some other changes to how readdir calls are handled.

Reported-by: Kjell Rune Skaaraas <kjella79@yahoo.no>
Reviewed-and-Tested-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/ioctl.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c
index 2fa22f20cfc5..0c98672d0122 100644
--- a/fs/cifs/ioctl.c
+++ b/fs/cifs/ioctl.c
@@ -38,10 +38,10 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg)
 	struct cifs_sb_info *cifs_sb;
 #ifdef CONFIG_CIFS_POSIX
 	struct cifsFileInfo *pSMBFile = filep->private_data;
-	struct cifsTconInfo *tcon = tlink_tcon(pSMBFile->tlink);
+	struct cifsTconInfo *tcon;
 	__u64	ExtAttrBits = 0;
 	__u64	ExtAttrMask = 0;
-	__u64   caps = le64_to_cpu(tcon->fsUnixInfo.Capability);
+	__u64   caps;
 #endif /* CONFIG_CIFS_POSIX */
 
 	xid = GetXid();
@@ -62,6 +62,10 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg)
 			break;
 #ifdef CONFIG_CIFS_POSIX
 		case FS_IOC_GETFLAGS:
+			if (pSMBFile == NULL)
+				break;
+			tcon = tlink_tcon(pSMBFile->tlink);
+			caps = le64_to_cpu(tcon->fsUnixInfo.Capability);
 			if (CIFS_UNIX_EXTATTR_CAP & caps) {
 				rc = CIFSGetExtAttr(xid, tcon, pSMBFile->netfid,
 					&ExtAttrBits, &ExtAttrMask);
@@ -73,6 +77,10 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg)
 			break;
 
 		case FS_IOC_SETFLAGS:
+			if (pSMBFile == NULL)
+				break;
+			tcon = tlink_tcon(pSMBFile->tlink);
+			caps = le64_to_cpu(tcon->fsUnixInfo.Capability);
 			if (CIFS_UNIX_EXTATTR_CAP & caps) {
 				if (get_user(ExtAttrBits, (int __user *)arg)) {
 					rc = -EFAULT;

From 1a4ec46a68292515ae84deb8ee5cc2572db1fa99 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Mon, 1 Nov 2010 10:34:29 +0000
Subject: [PATCH 0243/1066] solos: Add 'Firmware' attribute for Traverse
 overall firmware version

The existing 'FirmwareVersion' attribute only covers the DSP firmware as
provided by Conexant; not the overall version of the device firmware. We
do want to be able to see the full version number too.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/atm/solos-attrlist.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/atm/solos-attrlist.c b/drivers/atm/solos-attrlist.c
index 1a9332e4efe0..9a676ee30824 100644
--- a/drivers/atm/solos-attrlist.c
+++ b/drivers/atm/solos-attrlist.c
@@ -1,6 +1,7 @@
 SOLOS_ATTR_RO(DriverVersion)
 SOLOS_ATTR_RO(APIVersion)
 SOLOS_ATTR_RO(FirmwareVersion)
+SOLOS_ATTR_RO(Version)
 // SOLOS_ATTR_RO(DspVersion)
 // SOLOS_ATTR_RO(CommonHandshake)
 SOLOS_ATTR_RO(Connected)

From 3ce1227c3c374c742ed78484226e24567f09ff99 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Mon, 1 Nov 2010 10:35:28 +0000
Subject: [PATCH 0244/1066] solos: Refuse to upgrade firmware with older FPGA.
 It doesn't work.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/atm/solos-pci.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index f46138ab38b6..2e08c996fd30 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -1161,6 +1161,14 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
 		 major_ver, minor_ver, fpga_ver);
 
+	if (fpga_ver < 37 && (fpga_upgrade || firmware_upgrade ||
+			      db_fpga_upgrade || db_firmware_upgrade)) {
+		dev_warn(&dev->dev,
+			 "FPGA too old; cannot upgrade flash. Use JTAG.\n");
+		fpga_upgrade = firmware_upgrade = 0;
+		db_fpga_upgrade = db_firmware_upgrade = 0;
+	}
+
 	if (card->fpga_version >= DMA_SUPPORTED){
 		card->using_dma = 1;
 	} else {

From 4c46ee52589a4edd67447214eb489b10fed5c53a Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Thu, 4 Nov 2010 11:47:04 +0000
Subject: [PATCH 0245/1066] classifier: report statistics for basic classifier

The basic classifier keeps statistics but does not report it to user space.
This showed up when using basic classifier (with police) as a default catch
all on ingress; no statistics were reported.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/cls_basic.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/sched/cls_basic.c b/net/sched/cls_basic.c
index efd4f95fd050..f23d9155b1ef 100644
--- a/net/sched/cls_basic.c
+++ b/net/sched/cls_basic.c
@@ -268,6 +268,10 @@ static int basic_dump(struct tcf_proto *tp, unsigned long fh,
 		goto nla_put_failure;
 
 	nla_nest_end(skb, nest);
+
+	if (tcf_exts_dump_stats(skb, &f->exts, &basic_ext_map) < 0)
+		goto nla_put_failure;
+
 	return skb->len;
 
 nla_put_failure:

From f46421416fb6b91513fb687d6503142cd99034a5 Mon Sep 17 00:00:00 2001
From: Shan Wei <shanwei@cn.fujitsu.com>
Date: Fri, 5 Nov 2010 01:56:34 +0000
Subject: [PATCH 0246/1066] ipv6: fix overlap check for fragments

The type of FRAG6_CB(prev)->offset is int, skb->len is *unsigned* int,
and offset is int.

Without this patch, type conversion occurred to this expression, when
(FRAG6_CB(prev)->offset + prev->len) is less than offset.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/reassembly.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index c7ba3149633f..0f2766453759 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -349,7 +349,7 @@ found:
 
 	/* Check for overlap with preceding fragment. */
 	if (prev &&
-	    (FRAG6_CB(prev)->offset + prev->len) - offset > 0)
+	    (FRAG6_CB(prev)->offset + prev->len) > offset)
 		goto discard_fq;
 
 	/* Look for overlap with succeeding segment. */

From 63f4e1903ae41b4e457dd4490afe0f59e7641ad6 Mon Sep 17 00:00:00 2001
From: Guillaume Chazarain <guichaz@gmail.com>
Date: Sat, 6 Nov 2010 06:39:31 +0000
Subject: [PATCH 0247/1066] skge: Remove tx queue stopping in skge_devinit()

After e6484930d7c73d324bccda7d43d131088da697b9: net: allocate tx queues in register_netdevice
It causes an Oops at skge_probe() time.

Signed-off-by: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/skge.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index bfec2e0f5275..220e0398f1d5 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -3858,7 +3858,6 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
 
 	/* device is off until link detection */
 	netif_carrier_off(dev);
-	netif_stop_queue(dev);
 
 	return dev;
 }

From 18543a643fae694982c7d89c22436885f3506497 Mon Sep 17 00:00:00 2001
From: Guillaume Chazarain <guichaz@gmail.com>
Date: Sat, 6 Nov 2010 06:39:32 +0000
Subject: [PATCH 0248/1066] net: Detect and ignore netif_stop_queue() calls
 before register_netdev()

After e6484930d7c73d324bccda7d43d131088da697b9: net: allocate tx queues in register_netdevice
These calls make net drivers oops at load time, so let's avoid people
git-bisect'ing known problems.

Signed-off-by: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/netdevice.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 072652d94d9f..d8fd2c23a1b9 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1554,6 +1554,11 @@ static inline void netif_tx_wake_all_queues(struct net_device *dev)
 
 static inline void netif_tx_stop_queue(struct netdev_queue *dev_queue)
 {
+	if (WARN_ON(!dev_queue)) {
+		printk(KERN_INFO "netif_stop_queue() cannot be called before "
+		       "register_netdev()");
+		return;
+	}
 	set_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
 }
 

From eb589063ed482f5592b1378e4136d6998419af6e Mon Sep 17 00:00:00 2001
From: Junchang Wang <junchangwang@gmail.com>
Date: Sun, 7 Nov 2010 23:19:43 +0000
Subject: [PATCH 0249/1066] pktgen: correct uninitialized queue_map

This fix a bug reported by backyes.
Right the first time pktgen's using queue_map that's not been initialized
by set_cur_queue_map(pkt_dev);

Signed-off-by: Junchang Wang <junchangwang@gmail.com>
Signed-off-by: Backyes <backyes@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/pktgen.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 1992cd050e26..33bc3823ac6f 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -2612,8 +2612,8 @@ static struct sk_buff *fill_packet_ipv4(struct net_device *odev,
 	/* Update any of the values, used when we're incrementing various
 	 * fields.
 	 */
-	queue_map = pkt_dev->cur_queue_map;
 	mod_cur_headers(pkt_dev);
+	queue_map = pkt_dev->cur_queue_map;
 
 	datalen = (odev->hard_header_len + 16) & ~0xf;
 
@@ -2976,8 +2976,8 @@ static struct sk_buff *fill_packet_ipv6(struct net_device *odev,
 	/* Update any of the values, used when we're incrementing various
 	 * fields.
 	 */
-	queue_map = pkt_dev->cur_queue_map;
 	mod_cur_headers(pkt_dev);
+	queue_map = pkt_dev->cur_queue_map;
 
 	skb = __netdev_alloc_skb(odev,
 				 pkt_dev->cur_pkt_size + 64

From b67d801f922b989e6756579438bd493ad9052bca Mon Sep 17 00:00:00 2001
From: Ursula Braun <ursula.braun@de.ibm.com>
Date: Mon, 8 Nov 2010 03:03:48 +0000
Subject: [PATCH 0250/1066] qeth: remove dev_queue_xmit invocation

For a certain Hipersockets specific error code in the xmit path, the
qeth driver tries to invoke dev_queue_xmit again.
Commit 79640a4ca6955e3ebdb7038508fa7a0cd7fa5527 introduces a busylock
causing locking problems in case of re-invoked dev_queue_xmit by qeth.
This patch removes the attempts to retry packet sending with
dev_queue_xmit from the qeth driver.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/s390/net/qeth_core.h      |  9 ------
 drivers/s390/net/qeth_core_main.c | 53 +++++--------------------------
 2 files changed, 8 insertions(+), 54 deletions(-)

diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 6be43eb126b4..f47a714538db 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -440,7 +440,6 @@ struct qeth_qdio_out_q {
 	 * index of buffer to be filled by driver; state EMPTY or PACKING
 	 */
 	int next_buf_to_fill;
-	int sync_iqdio_error;
 	/*
 	 * number of buffers that are currently filled (PRIMED)
 	 * -> these buffers are hardware-owned
@@ -695,14 +694,6 @@ struct qeth_mc_mac {
 	int is_vmac;
 };
 
-struct qeth_skb_data {
-	__u32 magic;
-	int count;
-};
-
-#define QETH_SKB_MAGIC 0x71657468
-#define QETH_SIGA_CC2_RETRIES 3
-
 struct qeth_rx {
 	int b_count;
 	int b_index;
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 764267062601..09ab6a2d3e49 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -877,8 +877,8 @@ out:
 	return;
 }
 
-static void __qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
-		 struct qeth_qdio_out_buffer *buf, unsigned int qeth_skip_skb)
+static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
+		struct qeth_qdio_out_buffer *buf)
 {
 	int i;
 	struct sk_buff *skb;
@@ -887,13 +887,11 @@ static void __qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
 	if (buf->buffer->element[0].flags & 0x40)
 		atomic_dec(&queue->set_pci_flags_count);
 
-	if (!qeth_skip_skb) {
+	skb = skb_dequeue(&buf->skb_list);
+	while (skb) {
+		atomic_dec(&skb->users);
+		dev_kfree_skb_any(skb);
 		skb = skb_dequeue(&buf->skb_list);
-		while (skb) {
-			atomic_dec(&skb->users);
-			dev_kfree_skb_any(skb);
-			skb = skb_dequeue(&buf->skb_list);
-		}
 	}
 	for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(queue->card); ++i) {
 		if (buf->buffer->element[i].addr && buf->is_header[i])
@@ -909,12 +907,6 @@ static void __qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
 	atomic_set(&buf->state, QETH_QDIO_BUF_EMPTY);
 }
 
-static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
-		struct qeth_qdio_out_buffer *buf)
-{
-	__qeth_clear_output_buffer(queue, buf, 0);
-}
-
 void qeth_clear_qdio_buffers(struct qeth_card *card)
 {
 	int i, j;
@@ -2833,7 +2825,6 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
 		}
 	}
 
-	queue->sync_iqdio_error = 0;
 	queue->card->dev->trans_start = jiffies;
 	if (queue->card->options.performance_stats) {
 		queue->card->perf_stats.outbound_do_qdio_cnt++;
@@ -2849,10 +2840,6 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
 		queue->card->perf_stats.outbound_do_qdio_time +=
 			qeth_get_micros() -
 			queue->card->perf_stats.outbound_do_qdio_start_time;
-	if (rc > 0) {
-		if (!(rc & QDIO_ERROR_SIGA_BUSY))
-			queue->sync_iqdio_error = rc & 3;
-	}
 	if (rc) {
 		queue->card->stats.tx_errors += count;
 		/* ignore temporary SIGA errors without busy condition */
@@ -2940,7 +2927,6 @@ void qeth_qdio_output_handler(struct ccw_device *ccwdev,
 	struct qeth_qdio_out_q *queue = card->qdio.out_qs[__queue];
 	struct qeth_qdio_out_buffer *buffer;
 	int i;
-	unsigned qeth_send_err;
 
 	QETH_CARD_TEXT(card, 6, "qdouhdl");
 	if (qdio_error & QDIO_ERROR_ACTIVATE_CHECK_CONDITION) {
@@ -2956,9 +2942,8 @@ void qeth_qdio_output_handler(struct ccw_device *ccwdev,
 	}
 	for (i = first_element; i < (first_element + count); ++i) {
 		buffer = &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q];
-		qeth_send_err = qeth_handle_send_error(card, buffer, qdio_error);
-		__qeth_clear_output_buffer(queue, buffer,
-			(qeth_send_err == QETH_SEND_ERROR_RETRY) ? 1 : 0);
+		qeth_handle_send_error(card, buffer, qdio_error);
+		qeth_clear_output_buffer(queue, buffer);
 	}
 	atomic_sub(count, &queue->used_buffers);
 	/* check if we need to do something on this outbound queue */
@@ -3183,10 +3168,7 @@ int qeth_do_send_packet_fast(struct qeth_card *card,
 		int offset, int hd_len)
 {
 	struct qeth_qdio_out_buffer *buffer;
-	struct sk_buff *skb1;
-	struct qeth_skb_data *retry_ctrl;
 	int index;
-	int rc;
 
 	/* spin until we get the queue ... */
 	while (atomic_cmpxchg(&queue->state, QETH_OUT_Q_UNLOCKED,
@@ -3205,25 +3187,6 @@ int qeth_do_send_packet_fast(struct qeth_card *card,
 	atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
 	qeth_fill_buffer(queue, buffer, skb, hdr, offset, hd_len);
 	qeth_flush_buffers(queue, index, 1);
-	if (queue->sync_iqdio_error == 2) {
-		skb1 = skb_dequeue(&buffer->skb_list);
-		while (skb1) {
-			atomic_dec(&skb1->users);
-			skb1 = skb_dequeue(&buffer->skb_list);
-		}
-		retry_ctrl = (struct qeth_skb_data *) &skb->cb[16];
-		if (retry_ctrl->magic != QETH_SKB_MAGIC) {
-			retry_ctrl->magic = QETH_SKB_MAGIC;
-			retry_ctrl->count = 0;
-		}
-		if (retry_ctrl->count < QETH_SIGA_CC2_RETRIES) {
-			retry_ctrl->count++;
-			rc = dev_queue_xmit(skb);
-		} else {
-			dev_kfree_skb_any(skb);
-			QETH_CARD_TEXT(card, 2, "qrdrop");
-		}
-	}
 	return 0;
 out:
 	atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);

From 0cffef48ebf5060f749d8b04ab0437a4ba009e77 Mon Sep 17 00:00:00 2001
From: Frank Blaschka <frank.blaschka@de.ibm.com>
Date: Mon, 8 Nov 2010 03:03:49 +0000
Subject: [PATCH 0251/1066] qeth: fix race condition during device startup

QDIO is running independent from netdevice state. We are not
allowed to schedule NAPI in case the netdevice is not open.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/s390/net/qeth_core_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 09ab6a2d3e49..e6b2df0e73f5 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -2903,7 +2903,7 @@ void qeth_qdio_start_poll(struct ccw_device *ccwdev, int queue,
 {
 	struct qeth_card *card = (struct qeth_card *)card_ptr;
 
-	if (card->dev)
+	if (card->dev && (card->dev->flags & IFF_UP))
 		napi_schedule(&card->napi);
 }
 EXPORT_SYMBOL_GPL(qeth_qdio_start_poll);

From aa58163a76a3aef33c7220931543d45d0fe43753 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@parallels.com>
Date: Mon, 8 Nov 2010 06:20:50 +0000
Subject: [PATCH 0252/1066] rds: Fix rds message leak in rds_message_map_pages

The sgs allocation error path leaks the allocated message.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/rds/message.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/rds/message.c b/net/rds/message.c
index 848cff45183b..1fd3d29023d7 100644
--- a/net/rds/message.c
+++ b/net/rds/message.c
@@ -249,8 +249,10 @@ struct rds_message *rds_message_map_pages(unsigned long *page_addrs, unsigned in
 	rm->m_inc.i_hdr.h_len = cpu_to_be32(total_len);
 	rm->data.op_nents = ceil(total_len, PAGE_SIZE);
 	rm->data.op_sg = rds_message_alloc_sgs(rm, num_sgs);
-	if (!rm->data.op_sg)
+	if (!rm->data.op_sg) {
+		rds_message_put(rm);
 		return ERR_PTR(-ENOMEM);
+	}
 
 	for (i = 0; i < rm->data.op_nents; ++i) {
 		sg_set_page(&rm->data.op_sg[i],

From a91be2acc648f18d39b15c6eb7136b0c208e2cab Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 25 Oct 2010 15:04:13 -0700
Subject: [PATCH 0253/1066] usb.h: fix ioctl kernel-doc info

Fix struct field name, prevent kernel-doc warnings.

Warning(include/linux/usb.h:865): No description found for parameter 'unlocked_ioctl'
Warning(include/linux/usb.h:865): Excess struct/union/enum/typedef member 'ioctl' description in 'usb_driver'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 include/linux/usb.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/usb.h b/include/linux/usb.h
index 35fe6ab222bb..24300d8a1bc1 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -797,7 +797,7 @@ struct usbdrv_wrap {
  * @disconnect: Called when the interface is no longer accessible, usually
  *	because its device has been (or is being) disconnected or the
  *	driver module is being unloaded.
- * @ioctl: Used for drivers that want to talk to userspace through
+ * @unlocked_ioctl: Used for drivers that want to talk to userspace through
  *	the "usbfs" filesystem.  This lets devices provide ways to
  *	expose information to user space regardless of where they
  *	do (or don't) show up otherwise in the filesystem.

From 7fea0f714ffb3f303d4b66933af2df2f5584c9bf Mon Sep 17 00:00:00 2001
From: Sebastien Bourdeauducq <sebastien@milkymist.org>
Date: Wed, 3 Nov 2010 11:54:12 +0100
Subject: [PATCH 0254/1066] USB: ftdi_sio: add device IDs for Milkymist One
 JTAG/serial

Add the USB IDs for the Milkymist One FTDI-based JTAG/serial adapter
(http://projects.qi-hardware.com/index.php/p/mmone-jtag-serial-cable/)
to the ftdi_sio driver and disable the first serial channel (used as
JTAG from userspace).

Signed-off-by: Sebastien Bourdeauducq <sebastien@milkymist.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ftdi_sio.c     | 2 ++
 drivers/usb/serial/ftdi_sio_ids.h | 7 +++++++
 2 files changed, 9 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 89a9a5847803..76f8b3556672 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -794,6 +794,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
+	{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 7dfe02f1fb6a..263f62551197 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1100,3 +1100,10 @@
 #define FTDI_SCIENCESCOPE_LOGBOOKML_PID		0xFF18
 #define FTDI_SCIENCESCOPE_LS_LOGBOOK_PID	0xFF1C
 #define FTDI_SCIENCESCOPE_HS_LOGBOOK_PID	0xFF1D
+
+/*
+ * Milkymist One JTAG/Serial
+ */
+#define QIHARDWARE_VID			0x20B7
+#define MILKYMISTONE_JTAGSERIAL_PID	0x0713
+

From 269e2d77b82d92d8dad543a2375e74372e9d773e Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 8 Nov 2010 16:27:12 -0500
Subject: [PATCH 0255/1066] libipw: fix proc entry removal

This bug seems to be due to commit 27ae60f8f7aac ("ipw2x00: replace
"ieee80211" with "libipw" where appropriate"), where Pavel did this:

-       libipw_proc = proc_mkdir(DRV_NAME, init_net.proc_net);
+       libipw_proc = proc_mkdir("ieee80211", init_net.proc_net);

but then the cleanup was kept as

        remove_proc_entry(DRV_NAME, init_net.proc_net);

in both places (both in the failure case and in the unload case). The
error string is also total crap, and says

     "Unable to create " DRV_NAME " proc directory\n");

Even though it doesn't actually create a proc directory named DRV_NAME at all.

So that patch looks like total and utter crap to me. The commit message says

  "Keep /proc/net/ieee80211 under the original name to avoid breaking user
    interface."

but the thing is, it really didn't fix anything but that one create
thing. It needs to fix all the other cases too.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ipw2x00/libipw_module.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index 32dee2ce5d31..d5ef696298ee 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -54,6 +54,7 @@
 
 #define DRV_DESCRIPTION "802.11 data/management/control stack"
 #define DRV_NAME        "libipw"
+#define DRV_PROCNAME	"ieee80211"
 #define DRV_VERSION	LIBIPW_VERSION
 #define DRV_COPYRIGHT   "Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>"
 
@@ -293,16 +294,16 @@ static int __init libipw_init(void)
 	struct proc_dir_entry *e;
 
 	libipw_debug_level = debug;
-	libipw_proc = proc_mkdir("ieee80211", init_net.proc_net);
+	libipw_proc = proc_mkdir(DRV_PROCNAME, init_net.proc_net);
 	if (libipw_proc == NULL) {
-		LIBIPW_ERROR("Unable to create " DRV_NAME
+		LIBIPW_ERROR("Unable to create " DRV_PROCNAME
 				" proc directory\n");
 		return -EIO;
 	}
 	e = proc_create("debug_level", S_IRUGO | S_IWUSR, libipw_proc,
 			&debug_level_proc_fops);
 	if (!e) {
-		remove_proc_entry(DRV_NAME, init_net.proc_net);
+		remove_proc_entry(DRV_PROCNAME, init_net.proc_net);
 		libipw_proc = NULL;
 		return -EIO;
 	}
@@ -319,7 +320,7 @@ static void __exit libipw_exit(void)
 #ifdef CONFIG_LIBIPW_DEBUG
 	if (libipw_proc) {
 		remove_proc_entry("debug_level", libipw_proc);
-		remove_proc_entry(DRV_NAME, init_net.proc_net);
+		remove_proc_entry(DRV_PROCNAME, init_net.proc_net);
 		libipw_proc = NULL;
 	}
 #endif				/* CONFIG_LIBIPW_DEBUG */

From 5f841b4130a639e5f0fbcf4a9b26045d734e4ee6 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Wed, 27 Oct 2010 18:31:15 +0530
Subject: [PATCH 0256/1066] ath9k: Avoid HW opmode overridden on monitor mode
 changes

The HW opmode is blindly set to monitor type on monitor mode
change notification. This overrides the opmode when one of the
interfaces is still running as non-monitor iftype. So the monitoring
information needs to be maintained seperately.

Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c   | 14 ++++++++++++--
 drivers/net/wireless/ath/ath9k/hw.h   |  1 +
 drivers/net/wireless/ath/ath9k/main.c | 12 ++++++++----
 drivers/net/wireless/ath/ath9k/recv.c |  4 ++--
 4 files changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index cc13ee117823..c3a49045986d 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -952,9 +952,12 @@ static void ath9k_hw_set_operating_mode(struct ath_hw *ah, int opmode)
 		REG_SET_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION);
 		break;
 	case NL80211_IFTYPE_STATION:
-	case NL80211_IFTYPE_MONITOR:
 		REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE);
 		break;
+	default:
+		if (ah->is_monitoring)
+			REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE);
+		break;
 	}
 }
 
@@ -1634,7 +1637,6 @@ void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period)
 
 	switch (ah->opmode) {
 	case NL80211_IFTYPE_STATION:
-	case NL80211_IFTYPE_MONITOR:
 		REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(next_beacon));
 		REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, 0xffff);
 		REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff);
@@ -1663,6 +1665,14 @@ void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period)
 			AR_TBTT_TIMER_EN | AR_DBA_TIMER_EN | AR_SWBA_TIMER_EN;
 		break;
 	default:
+		if (ah->is_monitoring) {
+			REG_WRITE(ah, AR_NEXT_TBTT_TIMER,
+					TU_TO_USEC(next_beacon));
+			REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, 0xffff);
+			REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff);
+			flags |= AR_TBTT_TIMER_EN;
+			break;
+		}
 		ath_print(ath9k_hw_common(ah), ATH_DBG_BEACON,
 			  "%s: unsupported opmode: %d\n",
 			  __func__, ah->opmode);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index d032939768b0..d47d1b4b6002 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -622,6 +622,7 @@ struct ath_hw {
 
 	bool sw_mgmt_crypto;
 	bool is_pciexpress;
+	bool is_monitoring;
 	bool need_an_top2_fixup;
 	u16 tx_trig_level;
 
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index b52f1cf8a603..cf6fa54a2fa3 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1217,6 +1217,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
 		ah->imask |= ATH9K_INT_CST;
 
 	sc->sc_flags &= ~SC_OP_INVALID;
+	sc->sc_ah->is_monitoring = false;
 
 	/* Disable BMISS interrupt when we're not associated */
 	ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
@@ -1493,8 +1494,7 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 	ath9k_hw_set_interrupts(ah, ah->imask);
 
 	if (vif->type == NL80211_IFTYPE_AP    ||
-	    vif->type == NL80211_IFTYPE_ADHOC ||
-	    vif->type == NL80211_IFTYPE_MONITOR) {
+	    vif->type == NL80211_IFTYPE_ADHOC) {
 		sc->sc_flags |= SC_OP_ANI_RUN;
 		ath_start_ani(common);
 	}
@@ -1644,8 +1644,12 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 	if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
 		if (conf->flags & IEEE80211_CONF_MONITOR) {
 			ath_print(common, ATH_DBG_CONFIG,
-				  "HW opmode set to Monitor mode\n");
-			sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
+				  "Monitor mode is enabled\n");
+			sc->sc_ah->is_monitoring = true;
+		} else {
+			ath_print(common, ATH_DBG_CONFIG,
+				  "Monitor mode is disabled\n");
+			sc->sc_ah->is_monitoring = false;
 		}
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index fddb0129bb57..c76ea53c20ce 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -441,7 +441,7 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
 	 */
 	if (((sc->sc_ah->opmode != NL80211_IFTYPE_AP) &&
 	     (sc->rx.rxfilter & FIF_PROMISC_IN_BSS)) ||
-	    (sc->sc_ah->opmode == NL80211_IFTYPE_MONITOR))
+	    (sc->sc_ah->is_monitoring))
 		rfilt |= ATH9K_RX_FILTER_PROM;
 
 	if (sc->rx.rxfilter & FIF_CONTROL)
@@ -897,7 +897,7 @@ static bool ath9k_rx_accept(struct ath_common *common,
 		 * decryption and MIC failures. For monitor mode,
 		 * we also ignore the CRC error.
 		 */
-		if (ah->opmode == NL80211_IFTYPE_MONITOR) {
+		if (ah->is_monitoring) {
 			if (rx_stats->rs_status &
 			    ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
 			      ATH9K_RXERR_CRC))

From 10598c124ecabbbfd7522f74de19b8f7d52a1bee Mon Sep 17 00:00:00 2001
From: Vivek Natarajan <vnatarajan@atheros.com>
Date: Sat, 30 Oct 2010 22:05:13 +0530
Subject: [PATCH 0257/1066] ath9k: Fix a DMA latency issue for Intel Pinetrail
 platforms.

Throughput was severely affected in Intel Pinetrail platforms
because of a DMA problem in C3 state. This patch fixes this
issue.

Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
CC: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h | 1 +
 drivers/net/wireless/ath/ath9k/init.c  | 8 ++++++++
 drivers/net/wireless/ath/ath9k/main.c  | 5 +++++
 3 files changed, 14 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 9b8e7e3fcebd..170d44a35ccb 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -675,6 +675,7 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz)
 }
 
 extern struct ieee80211_ops ath9k_ops;
+extern struct pm_qos_request_list ath9k_pm_qos_req;
 extern int modparam_nohwcrypt;
 extern int led_blink;
 
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 95b41db0d86b..6a0d99eff404 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/pm_qos_params.h>
 
 #include "ath9k.h"
 
@@ -179,6 +180,8 @@ static const struct ath_ops ath9k_common_ops = {
 	.write = ath9k_iowrite32,
 };
 
+struct pm_qos_request_list ath9k_pm_qos_req;
+
 /**************************/
 /*     Initialization     */
 /**************************/
@@ -756,6 +759,9 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
 	ath_init_leds(sc);
 	ath_start_rfkill_poll(sc);
 
+	pm_qos_add_request(&ath9k_pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
+			   PM_QOS_DEFAULT_VALUE);
+
 	return 0;
 
 error_world:
@@ -811,6 +817,8 @@ void ath9k_deinit_device(struct ath_softc *sc)
 
 	ath9k_ps_wakeup(sc);
 
+	pm_qos_remove_request(&ath9k_pm_qos_req);
+
 	wiphy_rfkill_stop_polling(sc->hw->wiphy);
 	ath_deinit_leds(sc);
 
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index cf6fa54a2fa3..09dcdd7882e6 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/nl80211.h>
+#include <linux/pm_qos_params.h>
 #include "ath9k.h"
 #include "btcoex.h"
 
@@ -1239,6 +1240,8 @@ static int ath9k_start(struct ieee80211_hw *hw)
 			ath9k_btcoex_timer_resume(sc);
 	}
 
+	pm_qos_update_request(&ath9k_pm_qos_req, 55);
+
 mutex_unlock:
 	mutex_unlock(&sc->mutex);
 
@@ -1416,6 +1419,8 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 
 	sc->sc_flags |= SC_OP_INVALID;
 
+	pm_qos_update_request(&ath9k_pm_qos_req, PM_QOS_DEFAULT_VALUE);
+
 	mutex_unlock(&sc->mutex);
 
 	ath_print(common, ATH_DBG_CONFIG, "Driver halt\n");

From 8df86db9060ddd123d172c7adb6b2b71f31e77cd Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sat, 30 Oct 2010 19:46:37 +0200
Subject: [PATCH 0258/1066] carl9170: usbid table updates

This patch includes the following updates:
 * add D-Link DWA-130 Rev D
 * Netgear has three WNDA3100 versions.
   the original WNDA3100 is now called WNDA3100v1.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/carl9170/usb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
index d8607f4c144d..3317039cd28f 100644
--- a/drivers/net/wireless/ath/carl9170/usb.c
+++ b/drivers/net/wireless/ath/carl9170/usb.c
@@ -82,9 +82,11 @@ static struct usb_device_id carl9170_usb_ids[] = {
 	{ USB_DEVICE(0x07d1, 0x3c10) },
 	/* D-Link DWA 160 A2 */
 	{ USB_DEVICE(0x07d1, 0x3a09) },
+	/* D-Link DWA 130 D */
+	{ USB_DEVICE(0x07d1, 0x3a0f) },
 	/* Netgear WNA1000 */
 	{ USB_DEVICE(0x0846, 0x9040) },
-	/* Netgear WNDA3100 */
+	/* Netgear WNDA3100 (v1) */
 	{ USB_DEVICE(0x0846, 0x9010) },
 	/* Netgear WN111 v2 */
 	{ USB_DEVICE(0x0846, 0x9001), .driver_info = CARL9170_ONE_LED },

From 3cc25e510dfc36dc62ee0aa87344b36ed7c1742a Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 31 Oct 2010 15:31:54 +0100
Subject: [PATCH 0259/1066] cfg80211: fix a crash in dev lookup on dump
 commands

IS_ERR and PTR_ERR were called with the wrong pointer, leading to a
crash when cfg80211_get_dev_from_ifindex fails.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/wireless/nl80211.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index c506241f8637..4e78e3f26798 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -224,8 +224,8 @@ static int nl80211_prepare_netdev_dump(struct sk_buff *skb,
 	}
 
 	*rdev = cfg80211_get_dev_from_ifindex(sock_net(skb->sk), ifidx);
-	if (IS_ERR(dev)) {
-		err = PTR_ERR(dev);
+	if (IS_ERR(*rdev)) {
+		err = PTR_ERR(*rdev);
 		goto out_rtnl;
 	}
 

From fbb078fcd2fa83646ad9504d8e4c54a67b8729ae Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Wed, 3 Nov 2010 01:36:51 +0100
Subject: [PATCH 0260/1066] ath9k: check old power mode before clearing cycle
 counters

ath9k_ps_wakeup() clears the cycle counters after waking up the
hardware using ath9k_hw_setpower, however if power save is disabled,
then the counters will contain useful data, which then gets discarded.
Fix this by checking the old power mode before discarding any data.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 09dcdd7882e6..25d3ef4c338e 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -94,11 +94,13 @@ void ath9k_ps_wakeup(struct ath_softc *sc)
 {
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	unsigned long flags;
+	enum ath9k_power_mode power_mode;
 
 	spin_lock_irqsave(&sc->sc_pm_lock, flags);
 	if (++sc->ps_usecount != 1)
 		goto unlock;
 
+	power_mode = sc->sc_ah->power_mode;
 	ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
 
 	/*
@@ -106,10 +108,12 @@ void ath9k_ps_wakeup(struct ath_softc *sc)
 	 * useful data. Better clear them now so that they don't mess up
 	 * survey data results.
 	 */
-	spin_lock(&common->cc_lock);
-	ath_hw_cycle_counters_update(common);
-	memset(&common->cc_survey, 0, sizeof(common->cc_survey));
-	spin_unlock(&common->cc_lock);
+	if (power_mode != ATH9K_PM_AWAKE) {
+		spin_lock(&common->cc_lock);
+		ath_hw_cycle_counters_update(common);
+		memset(&common->cc_survey, 0, sizeof(common->cc_survey));
+		spin_unlock(&common->cc_lock);
+	}
 
  unlock:
 	spin_unlock_irqrestore(&sc->sc_pm_lock, flags);

From 352ffad646c0e0c5cf9ae8cea99710ee0d66ee27 Mon Sep 17 00:00:00 2001
From: Brian Cavagnolo <brian@cozybit.com>
Date: Thu, 4 Nov 2010 16:59:28 -0700
Subject: [PATCH 0261/1066] mac80211: unset SDATA_STATE_OFFCHANNEL when
 cancelling a scan

For client STA interfaces, ieee80211_do_stop unsets the relevant
interface's SDATA_STATE_RUNNING state bit prior to cancelling an
interrupted scan.  When ieee80211_offchannel_return is invoked as
part of cancelling the scan, it doesn't bother unsetting the
SDATA_STATE_OFFCHANNEL bit because it sees that the interface is
down.  Normally this doesn't matter because when the client STA
interface is brought back up, it will probably issue a scan.  But
in some cases (e.g., the user changes the interface type while it
is down), the SDATA_STATE_OFFCHANNEL bit will remain set.  This
prevents the interface queues from being started.  So we
cancel the scan before unsetting the SDATA_STATE_RUNNING bit.

Signed-off-by: Brian Cavagnolo <brian@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/iface.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index f9163b12c7f1..7aa85591dbe7 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -391,6 +391,9 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 	u32 hw_reconf_flags = 0;
 	int i;
 
+	if (local->scan_sdata == sdata)
+		ieee80211_scan_cancel(local);
+
 	clear_bit(SDATA_STATE_RUNNING, &sdata->state);
 
 	/*
@@ -523,9 +526,6 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 		synchronize_rcu();
 		skb_queue_purge(&sdata->skb_queue);
 
-		if (local->scan_sdata == sdata)
-			ieee80211_scan_cancel(local);
-
 		/*
 		 * Disable beaconing here for mesh only, AP and IBSS
 		 * are already taken care of.

From 2e30168ba7dba95710aaadf12b2a97163df067b1 Mon Sep 17 00:00:00 2001
From: Daniel Drake <dsd@laptop.org>
Date: Thu, 4 Nov 2010 21:21:52 +0000
Subject: [PATCH 0262/1066] libertas: terminate scan when stopping interface

There are currently no provisions in place to ensure that the scanning
task has been stopped when the interface is stopped or removed.

This can result in a WARNING at net/wireless/core.c:643 and other badness
when you remove the module while a scan is happening.

Terminate the scanning task during interface stop.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/cfg.c  | 5 +++--
 drivers/net/wireless/libertas/dev.h  | 1 +
 drivers/net/wireless/libertas/main.c | 7 +++++++
 3 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 5046a0005034..373930afc26b 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -700,8 +700,9 @@ static void lbs_scan_worker(struct work_struct *work)
 
 	if (priv->scan_channel < priv->scan_req->n_channels) {
 		cancel_delayed_work(&priv->scan_work);
-		queue_delayed_work(priv->work_thread, &priv->scan_work,
-			msecs_to_jiffies(300));
+		if (!priv->stopping)
+			queue_delayed_work(priv->work_thread, &priv->scan_work,
+				msecs_to_jiffies(300));
 	}
 
 	/* This is the final data we are about to send */
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index f062ed583901..cb14c38caf3a 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -36,6 +36,7 @@ struct lbs_private {
 	/* CFG80211 */
 	struct wireless_dev *wdev;
 	bool wiphy_registered;
+	bool stopping;
 	struct cfg80211_scan_request *scan_req;
 	u8 assoc_bss[ETH_ALEN];
 	u8 disassoc_reason;
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 47ce5a6ba120..46b88b118c99 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -104,6 +104,7 @@ static int lbs_dev_open(struct net_device *dev)
 	lbs_deb_enter(LBS_DEB_NET);
 
 	spin_lock_irq(&priv->driver_lock);
+	priv->stopping = false;
 
 	if (priv->connect_status == LBS_CONNECTED)
 		netif_carrier_on(dev);
@@ -131,10 +132,16 @@ static int lbs_eth_stop(struct net_device *dev)
 	lbs_deb_enter(LBS_DEB_NET);
 
 	spin_lock_irq(&priv->driver_lock);
+	priv->stopping = true;
 	netif_stop_queue(dev);
 	spin_unlock_irq(&priv->driver_lock);
 
 	schedule_work(&priv->mcast_work);
+	cancel_delayed_work_sync(&priv->scan_work);
+	if (priv->scan_req) {
+		cfg80211_scan_done(priv->scan_req, false);
+		priv->scan_req = NULL;
+	}
 
 	lbs_deb_leave(LBS_DEB_NET);
 	return 0;

From f119da3015712dc32bdf1c311652479e02dcb49a Mon Sep 17 00:00:00 2001
From: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Date: Thu, 4 Nov 2010 17:41:25 -0700
Subject: [PATCH 0263/1066] ath9k_hw: Fix AR9280 surprise removal during
 frequent idle on/off

Bit 22 of AR_WA should be set to fix the situation where chip reset
is asynchronous to clock of analog shift registers, such that when
reset is released, it could mess up the values of analog shift registers
and cause some hw issue on AR9280.

This bit is write only, but the driver does a read-modify-write
on AR_WA without setting bit 22 in ar9002_hw_configpcipowersave()
during radio disable. This causes surprise removal of hw. It can
never recover from this state and the hw will become usable only
after a power on/off cycle, and sometimes only during a cold reboot.

This issue can be triggered by doing frequent roaming with the
simple/test-roam script available from the wifi-test project [1]
when roaming between APs quickly. When roaming there is a is a high
possibility that the device being put into idle (radio disable) state
by mac80211 during AUTH->ASSOC. A device hardware reset would fail
and the kernel would output:

[40251.363799] ath: AWAKE -> FULL-SLEEP
[40251.363815] ieee80211 phy17: device no longer idle - working
[40251.363817] ath: Marking phy17 as not-idle
[40251.363819] ath: FULL-SLEEP -> AWAKE
[40251.415978] pciehp 0000:00:1c.3:pcie04: Card not present on Slot(3)
[40251.419896] ath: ah->misc_mode 0x4
[40251.428138] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3)
[40251.532247] ath: timeout (100000 us) on reg 0x9860: 0xffffffff & 0x00000001 != 0x00000000
[40251.532250] ath: Unable to reset channel (2462 MHz), reset status -5
[40251.532422] ath: Set channel: 5745 MHz
[40251.540639] ath: Failed to stop TX DMA in 100 msec after killing last frame
[40251.548826] ath: Failed to stop TX DMA in 100 msec after killing last frame
[40251.557023] ath: Failed to stop TX DMA in 100 msec after killing last frame
[40251.565211] ath: Failed to stop TX DMA in 100 msec after killing last frame
[40251.573415] ath: Failed to stop TX DMA in 100 msec after killing last frame
[40251.581603] ath: Failed to stop TX DMA in 100 msec after killing last frame
[40251.581606] ath: Failed to stop TX DMA. Resetting hardware!
[40251.592679] ath: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff
[40251.703330] ath: timeout (100000 us) on reg 0x7000: 0xffffffff & 0x00000003 != 0x00000000
[40251.703333] ath: RTC stuck in MAC reset
[40251.703334] ath: Chip reset failed
[40251.703335] ath: Unable to reset hardware; reset status -22

This is currently only reproducible with some HB92 (Half Mini-PCIE)
cards but the fix applies to all AR9280 cards. This patch fixes this
issue by setting bit 22 during radio disable.

This patch has fixes for all kernels that has ath9k.

[1] http://wireless.kernel.org/en/developers/Testing/wifi-test

Cc: kyungwan.nam@atheros.com
Cc: amod.bodas@atheros.com
Cc: david.quan@atheros.com
Cc: stable@kernel.org
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9002_hw.c | 3 +++
 drivers/net/wireless/ath/ath9k/reg.h       | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
index a0471f2e1c7a..48261b7252d0 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -410,6 +410,9 @@ static void ar9002_hw_configpcipowersave(struct ath_hw *ah,
 			val &= ~(AR_WA_BIT6 | AR_WA_BIT7);
 		}
 
+		if (AR_SREV_9280(ah))
+			val |= AR_WA_BIT22;
+
 		if (AR_SREV_9285E_20(ah))
 			val |= AR_WA_BIT23;
 
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 42976b0a01c1..fa05b711e5cd 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -703,6 +703,7 @@
 #define AR_WA_RESET_EN                  (1 << 18) /* Sw Control to enable PCI-Reset to POR (bit 15) */
 #define AR_WA_ANALOG_SHIFT              (1 << 20)
 #define AR_WA_POR_SHORT                 (1 << 21) /* PCI-E Phy reset control */
+#define AR_WA_BIT22			(1 << 22)
 #define AR9285_WA_DEFAULT		0x004a050b
 #define AR9280_WA_DEFAULT           	0x0040073b
 #define AR_WA_DEFAULT               	0x0000073f

From ac618d70aeb681df7b77c1107fdf26f3249f855f Mon Sep 17 00:00:00 2001
From: Haitao Zhang <minipanda@linuxrobot.org>
Date: Sun, 7 Nov 2010 12:50:24 +0800
Subject: [PATCH 0264/1066] ath9k_htc: Add support for device ID 3346

This patch adds support for USB dongle with device ID 3346 from IMC Networks.

Signed-off-by: Haitao Zhang <minipanda@linuxrobot.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 6576f683dba0..2f6b1e9f0aee 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -35,6 +35,7 @@ static struct usb_device_id ath9k_hif_usb_ids[] = {
 	{ USB_DEVICE(0x07D1, 0x3A10) }, /* Dlink Wireless 150 */
 	{ USB_DEVICE(0x13D3, 0x3327) }, /* Azurewave */
 	{ USB_DEVICE(0x13D3, 0x3328) }, /* Azurewave */
+	{ USB_DEVICE(0x13D3, 0x3346) }, /* IMC Networks */
 	{ USB_DEVICE(0x04CA, 0x4605) }, /* Liteon */
 	{ USB_DEVICE(0x083A, 0xA704) }, /* SMC Networks */
 	{ },

From 490b3f4eacab3220383d2db49255a73995ecdf25 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Mon, 8 Nov 2010 12:49:12 +0530
Subject: [PATCH 0265/1066] ath9k_htc: Fix probe failure if CONFIG_USB_DEBUG
 enabled

Since the endpoint descriptors (EP3 & EP4) were changed from Interrupt
to Bulk type by firmware, the urb submission done on Bulk pipes.
And the recent commit "check the endpoint type against the pipe type"
added aditional error checking against pipe types under CONFIG_USB_DEBUG.

So bmAttribute has to be updated for both EP3 & EP4 before submitting
urbs on that pipe. This patch resolves the following failure.

[ 2215.710936] usb 1-1: usb_probe_device
[ 2215.710945] usb 1-1: configuration #1 chosen from 1 choice
[ 2215.711152] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 2215.711252] ath9k_hif_usb 1-1:1.0: usb_probe_interface
[ 2215.711255] ath9k_hif_usb 1-1:1.0: usb_probe_interface - got id
[ 2215.712780] usb 1-1: BOGUS urb xfer, pipe 3 != type 1
[ 2215.713782] usb 1-1: ath9k_htc: Unable to allocate URBs
[ 2215.713801] ath9k_hif_usb: probe of 1-1:1.0 failed with error -22

Reported-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 30 +++++++++++-------------
 1 file changed, 14 insertions(+), 16 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 2f6b1e9f0aee..f7ec31b4ddd3 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -541,11 +541,11 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 			return;
 		}
 
-		usb_fill_int_urb(urb, hif_dev->udev,
+		usb_fill_bulk_urb(urb, hif_dev->udev,
 				 usb_rcvbulkpipe(hif_dev->udev,
 						 USB_REG_IN_PIPE),
 				 nskb->data, MAX_REG_IN_BUF_SIZE,
-				 ath9k_hif_usb_reg_in_cb, nskb, 1);
+				 ath9k_hif_usb_reg_in_cb, nskb);
 
 		ret = usb_submit_urb(urb, GFP_ATOMIC);
 		if (ret) {
@@ -721,11 +721,11 @@ static int ath9k_hif_usb_alloc_reg_in_urb(struct hif_device_usb *hif_dev)
 	if (!skb)
 		goto err;
 
-	usb_fill_int_urb(hif_dev->reg_in_urb, hif_dev->udev,
+	usb_fill_bulk_urb(hif_dev->reg_in_urb, hif_dev->udev,
 			 usb_rcvbulkpipe(hif_dev->udev,
 					 USB_REG_IN_PIPE),
 			 skb->data, MAX_REG_IN_BUF_SIZE,
-			 ath9k_hif_usb_reg_in_cb, skb, 1);
+			 ath9k_hif_usb_reg_in_cb, skb);
 
 	if (usb_submit_urb(hif_dev->reg_in_urb, GFP_KERNEL) != 0)
 		goto err;
@@ -844,14 +844,6 @@ static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev)
 		goto err_fw_req;
 	}
 
-	/* Alloc URBs */
-	ret = ath9k_hif_usb_alloc_urbs(hif_dev);
-	if (ret) {
-		dev_err(&hif_dev->udev->dev,
-			"ath9k_htc: Unable to allocate URBs\n");
-		goto err_urb;
-	}
-
 	/* Download firmware */
 	ret = ath9k_hif_usb_download_fw(hif_dev);
 	if (ret) {
@@ -867,16 +859,22 @@ static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev)
 	 */
 	for (idx = 0; idx < alt->desc.bNumEndpoints; idx++) {
 		endp = &alt->endpoint[idx].desc;
-		if (((endp->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
-				== 0x04) &&
-		    ((endp->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-				== USB_ENDPOINT_XFER_INT)) {
+		if ((endp->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+				== USB_ENDPOINT_XFER_INT) {
 			endp->bmAttributes &= ~USB_ENDPOINT_XFERTYPE_MASK;
 			endp->bmAttributes |= USB_ENDPOINT_XFER_BULK;
 			endp->bInterval = 0;
 		}
 	}
 
+	/* Alloc URBs */
+	ret = ath9k_hif_usb_alloc_urbs(hif_dev);
+	if (ret) {
+		dev_err(&hif_dev->udev->dev,
+			"ath9k_htc: Unable to allocate URBs\n");
+		goto err_urb;
+	}
+
 	return 0;
 
 err_fw_download:

From 48a7c3df14d0cda850337a9b3f9e667a0b12a996 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Mon, 8 Nov 2010 20:40:53 +0530
Subject: [PATCH 0266/1066] ath9k_hw: Fix memory leak on
 ath9k_hw_rf_alloc_ext_banks failure

The allocated externel radio banks have to be freed in
case of ath9k_hw_rf_alloc_ext_banks failure.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index c3a49045986d..6ebc68bca91f 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -484,6 +484,7 @@ static int ath9k_hw_post_init(struct ath_hw *ah)
 		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
 			  "Failed allocating banks for "
 			  "external radio\n");
+		ath9k_hw_rf_free_ext_banks(ah);
 		return ecode;
 	}
 

From 0e15482566b752718e7225168380904f1d0cdfa3 Mon Sep 17 00:00:00 2001
From: Meelis Roos <mroos@linux.ee>
Date: Mon, 8 Nov 2010 13:38:14 -0800
Subject: [PATCH 0267/1066] sparc: fix openpromfs compile

Fix openpromfs compilation by adding a missing semicolon in
fs/openpromfs/inode.c openprom_mount().

Signed-off-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/openpromfs/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/openpromfs/inode.c b/fs/openpromfs/inode.c
index ddb1f41376e5..911e61f348fc 100644
--- a/fs/openpromfs/inode.c
+++ b/fs/openpromfs/inode.c
@@ -418,7 +418,7 @@ out_no_root:
 static struct dentry *openprom_mount(struct file_system_type *fs_type,
 	int flags, const char *dev_name, void *data)
 {
-	return mount_single(fs_type, flags, data, openprom_fill_super)
+	return mount_single(fs_type, flags, data, openprom_fill_super);
 }
 
 static struct file_system_type openprom_fs_type = {

From 2c2742da1e590f426e8d85ce4e33b69142245fb8 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Fri, 5 Nov 2010 07:35:35 -0300
Subject: [PATCH 0268/1066] [media] BZ#22292: dibx000_common: Restore i2c algo
 pointer

Commit a90f933507859941c4a58028d7593a80f57895c4 accidentally removed
the piece of code setting the i2c algo pointer. Restore it.

That's what happens when you put two code statements on the same
line...

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/dibx000_common.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/dvb/frontends/dibx000_common.c b/drivers/media/dvb/frontends/dibx000_common.c
index a4991026254d..2311c0a3406c 100644
--- a/drivers/media/dvb/frontends/dibx000_common.c
+++ b/drivers/media/dvb/frontends/dibx000_common.c
@@ -130,6 +130,7 @@ static int i2c_adapter_init(struct i2c_adapter *i2c_adap,
 			    struct dibx000_i2c_master *mst)
 {
 	strncpy(i2c_adap->name, name, sizeof(i2c_adap->name));
+	i2c_adap->algo = algo;
 	i2c_adap->algo_data = NULL;
 	i2c_set_adapdata(i2c_adap, mst);
 	if (i2c_add_adapter(i2c_adap) < 0)

From 0edf2e5e2bd0ae7689ce8a57ae3c87cc1f0c6548 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Wed, 27 Oct 2010 09:30:32 -0300
Subject: [PATCH 0269/1066] [media] v4l: kill the BKL

All of the hard problems for BKL removal appear to be solved in the
v4l-dvb/master tree. This removes the BKL from the various open
functions that do not need it, or only use it to protect an
open count.

The zoran driver is nontrivial in this regard, so I introduce
a new mutex that locks both the open/release and the ioctl
functions. Someone with access to the hardware can probably
improve that by using the existing lock in all cases.

Finally, all drivers that still use the locked version of the
ioctl function now get called under a new mutex instead of
the BKL.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/Kconfig                       |  1 -
 drivers/media/video/cx231xx/cx231xx-417.c   |  6 ++---
 drivers/media/video/cx23885/cx23885-417.c   |  9 +------
 drivers/media/video/cx23885/cx23885-video.c |  5 ----
 drivers/media/video/se401.c                 |  7 +++--
 drivers/media/video/stk-webcam.c            |  4 ---
 drivers/media/video/tlg2300/pd-main.c       | 13 +++------
 drivers/media/video/usbvideo/vicam.c        | 29 ++++++++++-----------
 drivers/media/video/v4l2-dev.c              |  7 ++---
 drivers/media/video/zoran/zoran.h           |  1 +
 drivers/media/video/zoran/zoran_card.c      |  1 +
 drivers/media/video/zoran/zoran_driver.c    | 27 ++++++++++++++-----
 12 files changed, 51 insertions(+), 59 deletions(-)

diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index bad2cedb8d96..a28541b2b1a2 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -19,7 +19,6 @@ comment "Multimedia core support"
 
 config VIDEO_DEV
 	tristate "Video For Linux"
-	depends on BKL # used in many drivers for ioctl handling, need to kill
 	---help---
 	  V4L core support for video capture and overlay devices, webcams and
 	  AM/FM radio cards.
diff --git a/drivers/media/video/cx231xx/cx231xx-417.c b/drivers/media/video/cx231xx/cx231xx-417.c
index aab21f3ce472..4c7cac3b6254 100644
--- a/drivers/media/video/cx231xx/cx231xx-417.c
+++ b/drivers/media/video/cx231xx/cx231xx-417.c
@@ -31,7 +31,6 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
-#include <linux/smp_lock.h>
 #include <linux/vmalloc.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
@@ -1927,10 +1926,9 @@ static int mpeg_open(struct file *file)
 			dev = h;
 	}
 
-	if (dev == NULL) {
-		unlock_kernel();
+	if (dev == NULL)
 		return -ENODEV;
-	}
+
 	mutex_lock(&dev->lock);
 
 	/* allocate + initialize per filehandle data */
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index a6cc12f8736c..9a98dc55f657 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -31,7 +31,6 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
-#include <linux/smp_lock.h>
 #include <linux/slab.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
@@ -1576,12 +1575,8 @@ static int mpeg_open(struct file *file)
 
 	/* allocate + initialize per filehandle data */
 	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
-	if (NULL == fh) {
-		unlock_kernel();
+	if (!fh)
 		return -ENOMEM;
-	}
-
-	lock_kernel();
 
 	file->private_data = fh;
 	fh->dev      = dev;
@@ -1592,8 +1587,6 @@ static int mpeg_open(struct file *file)
 			    V4L2_FIELD_INTERLACED,
 			    sizeof(struct cx23885_buffer),
 			    fh, NULL);
-	unlock_kernel();
-
 	return 0;
 }
 
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 93af9c65b484..3cc9f462d08d 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -26,7 +26,6 @@
 #include <linux/kmod.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
@@ -743,8 +742,6 @@ static int video_open(struct file *file)
 	if (NULL == fh)
 		return -ENOMEM;
 
-	lock_kernel();
-
 	file->private_data = fh;
 	fh->dev      = dev;
 	fh->radio    = radio;
@@ -762,8 +759,6 @@ static int video_open(struct file *file)
 
 	dprintk(1, "post videobuf_queue_init()\n");
 
-	unlock_kernel();
-
 	return 0;
 }
 
diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c
index 41d0166c0f95..41360d7c3e96 100644
--- a/drivers/media/video/se401.c
+++ b/drivers/media/video/se401.c
@@ -31,7 +31,6 @@ static const char version[] = "0.24";
 #include <linux/init.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/pagemap.h>
 #include <linux/usb.h>
 #include "se401.h"
@@ -951,9 +950,9 @@ static int se401_open(struct file *file)
 	struct usb_se401 *se401 = (struct usb_se401 *)dev;
 	int err = 0;
 
-	lock_kernel();
+	mutex_lock(&se401->lock);
 	if (se401->user) {
-		unlock_kernel();
+		mutex_unlock(&se401->lock);
 		return -EBUSY;
 	}
 	se401->fbuf = rvmalloc(se401->maxframesize * SE401_NUMFRAMES);
@@ -962,7 +961,7 @@ static int se401_open(struct file *file)
 	else
 		err = -ENOMEM;
 	se401->user = !err;
-	unlock_kernel();
+	mutex_unlock(&se401->lock);
 
 	return err;
 }
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index f07a0f6b71c4..b5afe5f841ce 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -27,7 +27,6 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 
 #include <linux/usb.h>
 #include <linux/mm.h>
@@ -673,14 +672,11 @@ static int v4l_stk_open(struct file *fp)
 	vdev = video_devdata(fp);
 	dev = vdev_to_camera(vdev);
 
-	lock_kernel();
 	if (dev == NULL || !is_present(dev)) {
-		unlock_kernel();
 		return -ENXIO;
 	}
 	fp->private_data = dev;
 	usb_autopm_get_interface(dev->interface);
-	unlock_kernel();
 
 	return 0;
 }
diff --git a/drivers/media/video/tlg2300/pd-main.c b/drivers/media/video/tlg2300/pd-main.c
index 4555f4a5f4c8..c91424c0c135 100644
--- a/drivers/media/video/tlg2300/pd-main.c
+++ b/drivers/media/video/tlg2300/pd-main.c
@@ -36,7 +36,6 @@
 #include <linux/string.h>
 #include <linux/types.h>
 #include <linux/firmware.h>
-#include <linux/smp_lock.h>
 
 #include "vendorcmds.h"
 #include "pd-common.h"
@@ -485,15 +484,11 @@ static void poseidon_disconnect(struct usb_interface *interface)
 	/*unregister v4l2 device */
 	v4l2_device_unregister(&pd->v4l2_dev);
 
-	lock_kernel();
-	{
-		pd_dvb_usb_device_exit(pd);
-		poseidon_fm_exit(pd);
+	pd_dvb_usb_device_exit(pd);
+	poseidon_fm_exit(pd);
 
-		poseidon_audio_free(pd);
-		pd_video_exit(pd);
-	}
-	unlock_kernel();
+	poseidon_audio_free(pd);
+	pd_video_exit(pd);
 
 	usb_set_intfdata(interface, NULL);
 	kref_put(&pd->kref, poseidon_delete);
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index 5d6fd01f918a..dc17cce2fbb6 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -43,7 +43,6 @@
 #include <linux/vmalloc.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/firmware.h>
 #include <linux/ihex.h>
@@ -483,29 +482,28 @@ vicam_open(struct file *file)
 		return -EINVAL;
 	}
 
-	/* the videodev_lock held above us protects us from
-	 * simultaneous opens...for now. we probably shouldn't
-	 * rely on this fact forever.
+	/* cam_lock/open_count protects us from simultaneous opens
+	 * ... for now. we probably shouldn't rely on this fact forever.
 	 */
 
-	lock_kernel();
+	mutex_lock(&cam->cam_lock);
 	if (cam->open_count > 0) {
 		printk(KERN_INFO
 		       "vicam_open called on already opened camera");
-		unlock_kernel();
+		mutex_unlock(&cam->cam_lock);
 		return -EBUSY;
 	}
 
 	cam->raw_image = kmalloc(VICAM_MAX_READ_SIZE, GFP_KERNEL);
 	if (!cam->raw_image) {
-		unlock_kernel();
+		mutex_unlock(&cam->cam_lock);
 		return -ENOMEM;
 	}
 
 	cam->framebuf = rvmalloc(VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
 	if (!cam->framebuf) {
 		kfree(cam->raw_image);
-		unlock_kernel();
+		mutex_unlock(&cam->cam_lock);
 		return -ENOMEM;
 	}
 
@@ -513,10 +511,17 @@ vicam_open(struct file *file)
 	if (!cam->cntrlbuf) {
 		kfree(cam->raw_image);
 		rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
-		unlock_kernel();
+		mutex_unlock(&cam->cam_lock);
 		return -ENOMEM;
 	}
 
+	cam->needsDummyRead = 1;
+	cam->open_count++;
+
+	file->private_data = cam;
+	mutex_unlock(&cam->cam_lock);
+
+
 	// First upload firmware, then turn the camera on
 
 	if (!cam->is_initialized) {
@@ -527,12 +532,6 @@ vicam_open(struct file *file)
 
 	set_camera_power(cam, 1);
 
-	cam->needsDummyRead = 1;
-	cam->open_count++;
-
-	file->private_data = cam;
-	unlock_kernel();
-
 	return 0;
 }
 
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 0ca7978654b5..03f7f4670e9b 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -25,7 +25,6 @@
 #include <linux/init.h>
 #include <linux/kmod.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
 
@@ -247,10 +246,12 @@ static long v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 			mutex_unlock(vdev->lock);
 	} else if (vdev->fops->ioctl) {
 		/* TODO: convert all drivers to unlocked_ioctl */
-		lock_kernel();
+		static DEFINE_MUTEX(v4l2_ioctl_mutex);
+
+		mutex_lock(&v4l2_ioctl_mutex);
 		if (video_is_registered(vdev))
 			ret = vdev->fops->ioctl(filp, cmd, arg);
-		unlock_kernel();
+		mutex_unlock(&v4l2_ioctl_mutex);
 	} else
 		ret = -ENOTTY;
 
diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index 37fe16181e3c..27f05551183f 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -388,6 +388,7 @@ struct zoran {
 	struct videocodec *vfe;	/* video front end */
 
 	struct mutex resource_lock;	/* prevent evil stuff */
+	struct mutex other_lock;	/* please merge with above */
 
 	u8 initialized;		/* flag if zoran has been correctly initialized */
 	int user;		/* number of current users */
diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c
index 0aac376c3f7a..7e6d62467eaa 100644
--- a/drivers/media/video/zoran/zoran_card.c
+++ b/drivers/media/video/zoran/zoran_card.c
@@ -1227,6 +1227,7 @@ static int __devinit zoran_probe(struct pci_dev *pdev,
 	snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id);
 	spin_lock_init(&zr->spinlock);
 	mutex_init(&zr->resource_lock);
+	mutex_init(&zr->other_lock);
 	if (pci_enable_device(pdev))
 		goto zr_unreg;
 	pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, &zr->revision);
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 401082b853f0..67a52e844ae6 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -49,7 +49,6 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/pci.h>
 #include <linux/vmalloc.h>
 #include <linux/wait.h>
@@ -913,7 +912,7 @@ static int zoran_open(struct file *file)
 	dprintk(2, KERN_INFO "%s: %s(%s, pid=[%d]), users(-)=%d\n",
 		ZR_DEVNAME(zr), __func__, current->comm, task_pid_nr(current), zr->user + 1);
 
-	lock_kernel();
+	mutex_lock(&zr->other_lock);
 
 	if (zr->user >= 2048) {
 		dprintk(1, KERN_ERR "%s: too many users (%d) on device\n",
@@ -963,14 +962,14 @@ static int zoran_open(struct file *file)
 	file->private_data = fh;
 	fh->zr = zr;
 	zoran_open_init_session(fh);
-	unlock_kernel();
+	mutex_unlock(&zr->other_lock);
 
 	return 0;
 
 fail_fh:
 	kfree(fh);
 fail_unlock:
-	unlock_kernel();
+	mutex_unlock(&zr->other_lock);
 
 	dprintk(2, KERN_INFO "%s: open failed (%d), users(-)=%d\n",
 		ZR_DEVNAME(zr), res, zr->user);
@@ -989,7 +988,7 @@ zoran_close(struct file  *file)
 
 	/* kernel locks (fs/device.c), so don't do that ourselves
 	 * (prevents deadlocks) */
-	/*mutex_lock(&zr->resource_lock);*/
+	mutex_lock(&zr->other_lock);
 
 	zoran_close_end_session(fh);
 
@@ -1023,6 +1022,7 @@ zoran_close(struct file  *file)
 			encoder_call(zr, video, s_routing, 2, 0, 0);
 		}
 	}
+	mutex_unlock(&zr->other_lock);
 
 	file->private_data = NULL;
 	kfree(fh->overlay_mask);
@@ -3370,11 +3370,26 @@ static const struct v4l2_ioctl_ops zoran_ioctl_ops = {
 #endif
 };
 
+/* please use zr->resource_lock consistently and kill this wrapper */
+static long zoran_ioctl(struct file *file, unsigned int cmd,
+			unsigned long arg)
+{
+	struct zoran_fh *fh = file->private_data;
+	struct zoran *zr = fh->zr;
+	int ret;
+
+	mutex_lock(&zr->other_lock);
+	ret = video_ioctl2(file, cmd, arg);
+	mutex_unlock(&zr->other_lock);
+
+	return ret;
+}
+
 static const struct v4l2_file_operations zoran_fops = {
 	.owner = THIS_MODULE,
 	.open = zoran_open,
 	.release = zoran_close,
-	.ioctl = video_ioctl2,
+	.unlocked_ioctl = zoran_ioctl,
 	.read = zoran_read,
 	.write = zoran_write,
 	.mmap = zoran_mmap,

From dfcccd3aaba15e4e8ffae65fb2a757b3e49470de Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Mon, 8 Nov 2010 06:48:00 +0000
Subject: [PATCH 0270/1066] arm: omap1: devices: need to return with a value

Get rid of the following warning:

arch/arm/mach-omap1/devices.c: In function 'omap_init_wdt':
arch/arm/mach-omap1/devices.c:298: warning: 'return' with
no value, in function returning non-void

while at that, also change:

platform_device_register();
return 0;

into:

return platform_device_register();

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/devices.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index ea0d80a89da7..e7f9ee63dce5 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -321,10 +321,9 @@ static struct platform_device omap_wdt_device = {
 static int __init omap_init_wdt(void)
 {
 	if (!cpu_is_omap16xx())
-		return;
+		return -ENODEV;
 
-	platform_device_register(&omap_wdt_device);
-	return 0;
+	return platform_device_register(&omap_wdt_device);
 }
 subsys_initcall(omap_init_wdt);
 #endif

From 3f8ff0e72d75fdbe7f2cba2c4015fd9fdd9e13fd Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon, 8 Nov 2010 23:20:52 +0000
Subject: [PATCH 0271/1066] drm/i915: Fix LVDS fixed-mode regression from
 219adae1

Commit 219adae1 cached the EDID found during LVDS init, but in the
process prevented the init routine from discovering the preferred
fixed-mode for the panel. This was causing us to guess the correct mode,
which sometimes is wide of the mark.

Reported-and-tested-by: Jon Masters <jonathan@jonmasters.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_lvds.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index f1a649990ea9..4324a326f98e 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -481,11 +481,8 @@ static int intel_lvds_get_modes(struct drm_connector *connector)
 	struct drm_device *dev = connector->dev;
 	struct drm_display_mode *mode;
 
-	if (intel_lvds->edid) {
-		drm_mode_connector_update_edid_property(connector,
-							intel_lvds->edid);
+	if (intel_lvds->edid)
 		return drm_add_edid_modes(connector, intel_lvds->edid);
-	}
 
 	mode = drm_mode_duplicate(dev, intel_lvds->fixed_mode);
 	if (mode == 0)
@@ -939,7 +936,16 @@ void intel_lvds_init(struct drm_device *dev)
 	 */
 	intel_lvds->edid = drm_get_edid(connector,
 					&dev_priv->gmbus[pin].adapter);
-
+	if (intel_lvds->edid) {
+		if (drm_add_edid_modes(connector,
+				       intel_lvds->edid)) {
+			drm_mode_connector_update_edid_property(connector,
+								intel_lvds->edid);
+		} else {
+			kfree(intel_lvds->edid);
+			intel_lvds->edid = NULL;
+		}
+	}
 	if (!intel_lvds->edid) {
 		/* Didn't get an EDID, so
 		 * Set wide sync ranges so we get all modes

From 6070bf3596f3b5a54091a08d5b2bc90c143dc264 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Date: Mon, 8 Nov 2010 11:20:49 +0900
Subject: [PATCH 0272/1066] kernel: Constify temporary variable in roundup()

Fix build error with GCC 3.x caused by commit b28efd54
"kernel: roundup should only reference arguments once" by constifying
temporary variable used in that macro.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 include/linux/kernel.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 450092c1e35f..b526947bdf48 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -60,7 +60,7 @@ extern const char linux_proc_banner[];
 #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
 #define roundup(x, y) (					\
 {							\
-	typeof(y) __y = y;				\
+	const typeof(y) __y = y;			\
 	(((x) + (__y - 1)) / __y) * __y;		\
 }							\
 )

From 96c99b473a8531188e2f6106c6ef0e33bb4500f2 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Wed, 13 Oct 2010 18:16:52 -0700
Subject: [PATCH 0273/1066] Bluetooth: fix hidp kconfig dependency warning

Fix kconfig dependency warning to satisfy dependencies:

warning: (BT_HIDP && NET && BT && BT_L2CAP && INPUT || USB_HID && HID_SUPPORT && USB && INPUT) selects HID which has unmet direct dependencies (HID_SUPPORT && INPUT)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
---
 net/bluetooth/hidp/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/hidp/Kconfig b/net/bluetooth/hidp/Kconfig
index 98fdfa1fbddd..86a91543172a 100644
--- a/net/bluetooth/hidp/Kconfig
+++ b/net/bluetooth/hidp/Kconfig
@@ -1,6 +1,6 @@
 config BT_HIDP
 	tristate "HIDP protocol support"
-	depends on BT && BT_L2CAP && INPUT
+	depends on BT && BT_L2CAP && INPUT && HID_SUPPORT
 	select HID
 	help
 	  HIDP (Human Interface Device Protocol) is a transport layer

From bdb7524a75e4716535a29abb314a82619301e068 Mon Sep 17 00:00:00 2001
From: Johan Hedberg <johan.hedberg@nokia.com>
Date: Fri, 15 Oct 2010 10:46:09 +0300
Subject: [PATCH 0274/1066] Bluetooth: Fix non-SSP auth request for HIGH
 security level sockets

When initiating dedicated bonding a L2CAP raw socket with HIGH security
level is used. The kernel is supposed to trigger the authentication
request in this case but this doesn't happen currently for non-SSP
(pre-2.1) devices. The reason is that the authentication request happens
in the remote extended features callback which never gets called for
non-SSP devices. This patch fixes the issue by requesting also
authentiation in the (normal) remote features callback in the case of
non-SSP devices.

This rule is applied only for HIGH security level which might at first
seem unintuitive since on the server socket side MEDIUM is already
enough for authentication. However, for the clients we really want to
prefer the server side to decide the authentication requrement in most
cases, and since most client sockets use MEDIUM it's better to be
avoided on the kernel side for these sockets. The important socket to
request it for is the dedicated bonding one and that socket uses HIGH
security level.

The patch is based on the initial investigation and patch proposal from
Andrei Emeltchenko <endrei.emeltchenko@nokia.com>.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
---
 net/bluetooth/hci_event.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index bfef5bae0b3a..84093b0000b9 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1175,6 +1175,12 @@ static inline void hci_remote_features_evt(struct hci_dev *hdev, struct sk_buff
 				hci_send_cmd(hdev,
 					HCI_OP_READ_REMOTE_EXT_FEATURES,
 							sizeof(cp), &cp);
+			} else if (!ev->status && conn->out &&
+					conn->sec_level == BT_SECURITY_HIGH) {
+				struct hci_cp_auth_requested cp;
+				cp.handle = ev->handle;
+				hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED,
+							sizeof(cp), &cp);
 			} else {
 				conn->state = BT_CONNECTED;
 				hci_proto_connect_cfm(conn, ev->status);

From 556ea928f78a390fe16ae584e6433dff304d3014 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg@redhat.com>
Date: Thu, 16 Sep 2010 13:58:15 -0400
Subject: [PATCH 0275/1066] Bluetooth: Enable USB autosuspend by default on
 btusb

We've done this for a while in Fedora without any obvious problems other
than some interaction with input devices. Those should be fixed now, so
let's try this in mainline.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index d120a5c1c093..b2f288459317 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -1029,6 +1029,8 @@ static int btusb_probe(struct usb_interface *intf,
 
 	usb_set_intfdata(intf, data);
 
+	usb_enable_autosuspend(interface_to_usbdev(intf));
+
 	return 0;
 }
 

From bfaaeb3ed5533a2dd38e3aa9ea43efd619690aed Mon Sep 17 00:00:00 2001
From: steven miao <realmz6@gmail.com>
Date: Sat, 16 Oct 2010 18:29:47 -0400
Subject: [PATCH 0276/1066] Bluetooth: fix unaligned access to l2cap conf data

In function l2cap_get_conf_opt() and l2cap_add_conf_opt() the address of
opt->val sometimes is not at the edge of 2-bytes/4-bytes, so 2-bytes/4 bytes
access will cause data misalignment exeception.  Use get_unaligned_le16/32
and put_unaligned_le16/32 function to avoid data misalignment execption.

Signed-off-by: steven miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
---
 net/bluetooth/l2cap.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index daa7a988d9a6..b3fb02ab2292 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -2421,11 +2421,11 @@ static inline int l2cap_get_conf_opt(void **ptr, int *type, int *olen, unsigned
 		break;
 
 	case 2:
-		*val = __le16_to_cpu(*((__le16 *) opt->val));
+		*val = get_unaligned_le16(opt->val);
 		break;
 
 	case 4:
-		*val = __le32_to_cpu(*((__le32 *) opt->val));
+		*val = get_unaligned_le32(opt->val);
 		break;
 
 	default:
@@ -2452,11 +2452,11 @@ static void l2cap_add_conf_opt(void **ptr, u8 type, u8 len, unsigned long val)
 		break;
 
 	case 2:
-		*((__le16 *) opt->val) = cpu_to_le16(val);
+		put_unaligned_le16(cpu_to_le16(val), opt->val);
 		break;
 
 	case 4:
-		*((__le32 *) opt->val) = cpu_to_le32(val);
+		put_unaligned_le32(cpu_to_le32(val), opt->val);
 		break;
 
 	default:

From 4f8b691c9fb02e72359e71592098c1de3b8ec712 Mon Sep 17 00:00:00 2001
From: "Gustavo F. Padovan" <padovan@profusion.mobi>
Date: Mon, 18 Oct 2010 14:25:53 -0200
Subject: [PATCH 0277/1066] Bluetooth: fix endianness conversion in L2CAP

Last commit added a wrong endianness conversion. Fixing that.

Reported-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
---
 net/bluetooth/l2cap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index b3fb02ab2292..cd8f6ea03841 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -2452,11 +2452,11 @@ static void l2cap_add_conf_opt(void **ptr, u8 type, u8 len, unsigned long val)
 		break;
 
 	case 2:
-		put_unaligned_le16(cpu_to_le16(val), opt->val);
+		put_unaligned_le16(val, opt->val);
 		break;
 
 	case 4:
-		put_unaligned_le32(cpu_to_le32(val), opt->val);
+		put_unaligned_le32(val, opt->val);
 		break;
 
 	default:

From 63ce0900d79645c714de6c8b66d8040670068c9e Mon Sep 17 00:00:00 2001
From: Luiz Augusto von Dentz <luiz.dentz-von@nokia.com>
Date: Thu, 19 Aug 2010 14:06:10 +0300
Subject: [PATCH 0278/1066] Bluetooth: fix not setting security level when
 creating a rfcomm session

This cause 'No Bonding' to be used if userspace has not yet been paired
with remote device since the l2cap socket used to create the rfcomm
session does not have any security level set.

Signed-off-by: Luiz Augusto von Dentz <luiz.dentz-von@nokia.com>
Acked-by: Ville Tervo <ville.tervo@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
---
 net/bluetooth/rfcomm/core.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 39a5d87e33b4..fa642aa652bd 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -79,7 +79,10 @@ static void rfcomm_make_uih(struct sk_buff *skb, u8 addr);
 
 static void rfcomm_process_connect(struct rfcomm_session *s);
 
-static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst, int *err);
+static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src,
+							bdaddr_t *dst,
+							u8 sec_level,
+							int *err);
 static struct rfcomm_session *rfcomm_session_get(bdaddr_t *src, bdaddr_t *dst);
 static void rfcomm_session_del(struct rfcomm_session *s);
 
@@ -401,7 +404,7 @@ static int __rfcomm_dlc_open(struct rfcomm_dlc *d, bdaddr_t *src, bdaddr_t *dst,
 
 	s = rfcomm_session_get(src, dst);
 	if (!s) {
-		s = rfcomm_session_create(src, dst, &err);
+		s = rfcomm_session_create(src, dst, d->sec_level, &err);
 		if (!s)
 			return err;
 	}
@@ -679,7 +682,10 @@ static void rfcomm_session_close(struct rfcomm_session *s, int err)
 	rfcomm_session_put(s);
 }
 
-static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst, int *err)
+static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src,
+							bdaddr_t *dst,
+							u8 sec_level,
+							int *err)
 {
 	struct rfcomm_session *s = NULL;
 	struct sockaddr_l2 addr;
@@ -704,6 +710,7 @@ static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst
 	sk = sock->sk;
 	lock_sock(sk);
 	l2cap_pi(sk)->imtu = l2cap_mtu;
+	l2cap_pi(sk)->sec_level = sec_level;
 	if (l2cap_ertm)
 		l2cap_pi(sk)->mode = L2CAP_MODE_ERTM;
 	release_sock(sk);

From 3e3ede7dda2d77d2cbec608e663b6a6ace501bfc Mon Sep 17 00:00:00 2001
From: "Edgar (gimli) Hucek" <gimli@dark-green.com>
Date: Thu, 4 Nov 2010 08:04:33 +0100
Subject: [PATCH 0279/1066] Bluetooth: Add MacBookAir3,1(2) support

Adding the new MacBookAir3,1(2) to btusb.

Output without the patch and btusb loaded :

T:  Bus=03 Lev=02 Prnt=03 Port=02 Cnt=01 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05ac ProdID=821b Rev= 0.34
S:  Manufacturer=Apple Inc.
S:  Product=Bluetooth USB Host Controller
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=  32 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  32 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=  64 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  64 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=  64 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  64 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Output with the patch and btusb loaded :

T:  Bus=03 Lev=02 Prnt=03 Port=02 Cnt=01 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05ac ProdID=821b Rev= 0.34
S:  Manufacturer=Apple Inc.
S:  Product=Bluetooth USB Host Controller
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  32 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  32 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  64 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  64 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  64 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  64 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Signed-off-by: Edgar (gimli) Hucek <gimli@dark-green.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
---
 drivers/bluetooth/btusb.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index b2f288459317..ab3894f742c3 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -68,6 +68,9 @@ static struct usb_device_id btusb_table[] = {
 	/* Apple MacBookPro6,2 */
 	{ USB_DEVICE(0x05ac, 0x8218) },
 
+	/* Apple MacBookAir3,1, MacBookAir3,2 */
+	{ USB_DEVICE(0x05ac, 0x821b) },
+
 	/* AVM BlueFRITZ! USB v2.0 */
 	{ USB_DEVICE(0x057c, 0x3800) },
 

From 7c6048b7c83690ce59e65922fb2875479a22300e Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 28 Oct 2010 15:12:04 +0200
Subject: [PATCH 0280/1066] drm/stub/Kconfig: fix Kconfig for stub driver.

* Dave Airlie <airlied@linux.ie> wrote:

> > Lee, Chun-Yi (1):
> >       gpu: Add Intel GMA500(Poulsbo) Stub Driver

Today's -tip fails to build due to upstream commit e26fd11 ("gpu: Add Intel
GMA500(Poulsbo) Stub Driver"), committed two days ago and merged yesterday, on
x86 allmodconfig with BACKLIGHT_CLASS_DEVICE disabled:

 drivers/built-in.o: In function `acpi_video_bus_put_one_device':
 video.c:(.text+0x7d26f): undefined reference to `backlight_device_unregister'
 drivers/built-in.o: In function `acpi_video_switch_brightness':
 video.c:(.text+0x7d6f5): undefined reference to `backlight_force_update'
 drivers/built-in.o: In function `acpi_video_device_find_cap':
 video.c:(.text+0x7dfdb): undefined reference to `backlight_device_register'

drivers/gpu/stub/Kconfig selects ACPI_VIDEO, but ACPI_VIDEO is a complex interactive
Kconfig option with a lot of dependencies:

 config ACPI_VIDEO
	tristate "Video"
	depends on X86 && BACKLIGHT_CLASS_DEVICE && VIDEO_OUTPUT_CONTROL
	depends on INPUT
	select THERMAL
	help
	  This driver implements the ACPI Extensions For Display Adapters

and if any of its dependencies are not met, we get a build failure. This problem was
apparently realized in the driver at a certain stage:

 config STUB_POULSBO
        tristate "Intel GMA500 Stub Driver"
        depends on PCI
        # Poulsbo stub depends on ACPI_VIDEO when ACPI is enabled
        # but for select to work, need to select ACPI_VIDEO's dependencies, ick
        select ACPI_VIDEO if ACPI

but not fully understood and not fully fixed.

As a quick fix select these secondary dependencies, like drivers/gpu/drm/Kconfig
does:

 config DRM_I915
	tristate "i915 driver"
	depends on AGP_INTEL
	select SHMEM
	select DRM_KMS_HELPER
	select FB_CFB_FILLRECT
	select FB_CFB_COPYAREA
	select FB_CFB_IMAGEBLIT
	# i915 depends on ACPI_VIDEO when ACPI is enabled
	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
	select VIDEO_OUTPUT_CONTROL if ACPI
	select BACKLIGHT_CLASS_DEVICE if ACPI
	select INPUT if ACPI
	select ACPI_VIDEO if ACPI
	select ACPI_BUTTON if ACPI
	help
	  Choose this option if you have a system that has Intel 830M, 845G,
	  852GM, 855GM 865G or 915G integrated graphics.  If M is selected, the

But it's arguably not particularly nice looking, so maybe this area of code is ripe
for a Kconfig restructuring/cleanup.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/stub/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/stub/Kconfig b/drivers/gpu/stub/Kconfig
index 742c423567cf..0e1edd7311ff 100644
--- a/drivers/gpu/stub/Kconfig
+++ b/drivers/gpu/stub/Kconfig
@@ -3,6 +3,9 @@ config STUB_POULSBO
 	depends on PCI
 	# Poulsbo stub depends on ACPI_VIDEO when ACPI is enabled
 	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
+	select VIDEO_OUTPUT_CONTROL if ACPI
+	select BACKLIGHT_CLASS_DEVICE if ACPI
+	select INPUT if ACPI
 	select ACPI_VIDEO if ACPI
 	help
 	  Choose this option if you have a system that has Intel GMA500

From f5d8e0eb7a4308f46faf570fb7da1952c68992c5 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Thu, 28 Oct 2010 19:00:24 -0400
Subject: [PATCH 0281/1066] drm/radeon/kms/evergreen: add missing
 pm.vblank_sync update in vbl handler

Should fix dynpm problems on evergreen boards

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/evergreen.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index f12a5b3ec050..9947fd51b6e2 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -2295,6 +2295,7 @@ restart_ih:
 			case 0: /* D1 vblank */
 				if (disp_int & LB_D1_VBLANK_INTERRUPT) {
 					drm_handle_vblank(rdev->ddev, 0);
+					rdev->pm.vblank_sync = true;
 					wake_up(&rdev->irq.vblank_queue);
 					disp_int &= ~LB_D1_VBLANK_INTERRUPT;
 					DRM_DEBUG("IH: D1 vblank\n");
@@ -2316,6 +2317,7 @@ restart_ih:
 			case 0: /* D2 vblank */
 				if (disp_int_cont & LB_D2_VBLANK_INTERRUPT) {
 					drm_handle_vblank(rdev->ddev, 1);
+					rdev->pm.vblank_sync = true;
 					wake_up(&rdev->irq.vblank_queue);
 					disp_int_cont &= ~LB_D2_VBLANK_INTERRUPT;
 					DRM_DEBUG("IH: D2 vblank\n");
@@ -2337,6 +2339,7 @@ restart_ih:
 			case 0: /* D3 vblank */
 				if (disp_int_cont2 & LB_D3_VBLANK_INTERRUPT) {
 					drm_handle_vblank(rdev->ddev, 2);
+					rdev->pm.vblank_sync = true;
 					wake_up(&rdev->irq.vblank_queue);
 					disp_int_cont2 &= ~LB_D3_VBLANK_INTERRUPT;
 					DRM_DEBUG("IH: D3 vblank\n");
@@ -2358,6 +2361,7 @@ restart_ih:
 			case 0: /* D4 vblank */
 				if (disp_int_cont3 & LB_D4_VBLANK_INTERRUPT) {
 					drm_handle_vblank(rdev->ddev, 3);
+					rdev->pm.vblank_sync = true;
 					wake_up(&rdev->irq.vblank_queue);
 					disp_int_cont3 &= ~LB_D4_VBLANK_INTERRUPT;
 					DRM_DEBUG("IH: D4 vblank\n");
@@ -2379,6 +2383,7 @@ restart_ih:
 			case 0: /* D5 vblank */
 				if (disp_int_cont4 & LB_D5_VBLANK_INTERRUPT) {
 					drm_handle_vblank(rdev->ddev, 4);
+					rdev->pm.vblank_sync = true;
 					wake_up(&rdev->irq.vblank_queue);
 					disp_int_cont4 &= ~LB_D5_VBLANK_INTERRUPT;
 					DRM_DEBUG("IH: D5 vblank\n");
@@ -2400,6 +2405,7 @@ restart_ih:
 			case 0: /* D6 vblank */
 				if (disp_int_cont5 & LB_D6_VBLANK_INTERRUPT) {
 					drm_handle_vblank(rdev->ddev, 5);
+					rdev->pm.vblank_sync = true;
 					wake_up(&rdev->irq.vblank_queue);
 					disp_int_cont5 &= ~LB_D6_VBLANK_INTERRUPT;
 					DRM_DEBUG("IH: D6 vblank\n");

From 3205bc242b5e3950c808049dbf199fca91f2c844 Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri, 29 Oct 2010 10:46:44 +0200
Subject: [PATCH 0282/1066] drm/ttm: Documentation update

Remove an obsolete comment about mm nodes.
Document the new bo range manager interface.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/ttm/ttm_bo.c    |  8 ----
 include/drm/ttm/ttm_bo_driver.h | 81 ++++++++++++++++++++++++++++++---
 2 files changed, 75 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index a1cb783c7131..cf47978cf0e2 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -27,14 +27,6 @@
 /*
  * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
  */
-/* Notes:
- *
- * We store bo pointer in drm_mm_node struct so we know which bo own a
- * specific node. There is no protection on the pointer, thus to make
- * sure things don't go berserk you have to access this pointer while
- * holding the global lru lock and make sure anytime you free a node you
- * reset the pointer to NULL.
- */
 
 #include "ttm/ttm_module.h"
 #include "ttm/ttm_bo_driver.h"
diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h
index d01b4ddbdc56..8e0c848326b6 100644
--- a/include/drm/ttm/ttm_bo_driver.h
+++ b/include/drm/ttm/ttm_bo_driver.h
@@ -206,14 +206,84 @@ struct ttm_tt {
 struct ttm_mem_type_manager;
 
 struct ttm_mem_type_manager_func {
+	/**
+	 * struct ttm_mem_type_manager member init
+	 *
+	 * @man: Pointer to a memory type manager.
+	 * @p_size: Implementation dependent, but typically the size of the
+	 * range to be managed in pages.
+	 *
+	 * Called to initialize a private range manager. The function is
+	 * expected to initialize the man::priv member.
+	 * Returns 0 on success, negative error code on failure.
+	 */
 	int  (*init)(struct ttm_mem_type_manager *man, unsigned long p_size);
+
+	/**
+	 * struct ttm_mem_type_manager member takedown
+	 *
+	 * @man: Pointer to a memory type manager.
+	 *
+	 * Called to undo the setup done in init. All allocated resources
+	 * should be freed.
+	 */
 	int  (*takedown)(struct ttm_mem_type_manager *man);
+
+	/**
+	 * struct ttm_mem_type_manager member get_node
+	 *
+	 * @man: Pointer to a memory type manager.
+	 * @bo: Pointer to the buffer object we're allocating space for.
+	 * @placement: Placement details.
+	 * @mem: Pointer to a struct ttm_mem_reg to be filled in.
+	 *
+	 * This function should allocate space in the memory type managed
+	 * by @man. Placement details if
+	 * applicable are given by @placement. If successful,
+	 * @mem::mm_node should be set to a non-null value, and
+	 * @mem::start should be set to a value identifying the beginning
+	 * of the range allocated, and the function should return zero.
+	 * If the memory region accomodate the buffer object, @mem::mm_node
+	 * should be set to NULL, and the function should return 0.
+	 * If a system error occured, preventing the request to be fulfilled,
+	 * the function should return a negative error code.
+	 *
+	 * Note that @mem::mm_node will only be dereferenced by
+	 * struct ttm_mem_type_manager functions and optionally by the driver,
+	 * which has knowledge of the underlying type.
+	 *
+	 * This function may not be called from within atomic context, so
+	 * an implementation can and must use either a mutex or a spinlock to
+	 * protect any data structures managing the space.
+	 */
 	int  (*get_node)(struct ttm_mem_type_manager *man,
 			 struct ttm_buffer_object *bo,
 			 struct ttm_placement *placement,
 			 struct ttm_mem_reg *mem);
+
+	/**
+	 * struct ttm_mem_type_manager member put_node
+	 *
+	 * @man: Pointer to a memory type manager.
+	 * @mem: Pointer to a struct ttm_mem_reg to be filled in.
+	 *
+	 * This function frees memory type resources previously allocated
+	 * and that are identified by @mem::mm_node and @mem::start. May not
+	 * be called from within atomic context.
+	 */
 	void (*put_node)(struct ttm_mem_type_manager *man,
 			 struct ttm_mem_reg *mem);
+
+	/**
+	 * struct ttm_mem_type_manager member debug
+	 *
+	 * @man: Pointer to a memory type manager.
+	 * @prefix: Prefix to be used in printout to identify the caller.
+	 *
+	 * This function is called to print out the state of the memory
+	 * type manager to aid debugging of out-of-memory conditions.
+	 * It may not be called from within atomic context.
+	 */
 	void (*debug)(struct ttm_mem_type_manager *man, const char *prefix);
 };
 
@@ -231,14 +301,13 @@ struct ttm_mem_type_manager {
 	uint64_t size;
 	uint32_t available_caching;
 	uint32_t default_caching;
-
-	/*
-	 * Protected by the bdev->lru_lock.
-	 * TODO: Consider one lru_lock per ttm_mem_type_manager.
-	 * Plays ill with list removal, though.
-	 */
 	const struct ttm_mem_type_manager_func *func;
 	void *priv;
+
+	/*
+	 * Protected by the global->lru_lock.
+	 */
+
 	struct list_head lru;
 };
 

From d7a67cb16238abb3109c111761797e0584a6caf9 Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri, 29 Oct 2010 10:46:45 +0200
Subject: [PATCH 0283/1066] drm/ttm: Use private locks for the default bo range
 manager

Searching for a free block in the range manager may in some situations be a
lenghty operation, and we want to avoid holding the global lru lock
during that time. Instead use a per-manager spinlock.

This leaves the global lru lock for quick lru list and swap list manipulation
only, including list manipulation associated with reserving buffer objects.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/ttm/ttm_bo_manager.c | 81 +++++++++++++++-------------
 1 file changed, 45 insertions(+), 36 deletions(-)

diff --git a/drivers/gpu/drm/ttm/ttm_bo_manager.c b/drivers/gpu/drm/ttm/ttm_bo_manager.c
index 7410c190c891..038e947d00f9 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_manager.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_manager.c
@@ -1,6 +1,6 @@
 /**************************************************************************
  *
- * Copyright (c) 2007-2009 VMware, Inc., Palo Alto, CA., USA
+ * Copyright (c) 2007-2010 VMware, Inc., Palo Alto, CA., USA
  * All Rights Reserved.
  *
  * Permission is hereby granted, free of charge, to any person obtaining a
@@ -31,20 +31,29 @@
 #include "ttm/ttm_module.h"
 #include "ttm/ttm_bo_driver.h"
 #include "ttm/ttm_placement.h"
-#include <linux/jiffies.h>
+#include "drm_mm.h"
 #include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/file.h>
+#include <linux/spinlock.h>
 #include <linux/module.h>
 
+/**
+ * Currently we use a spinlock for the lock, but a mutex *may* be
+ * more appropriate to reduce scheduling latency if the range manager
+ * ends up with very fragmented allocation patterns.
+ */
+
+struct ttm_range_manager {
+	struct drm_mm mm;
+	spinlock_t lock;
+};
+
 static int ttm_bo_man_get_node(struct ttm_mem_type_manager *man,
 			       struct ttm_buffer_object *bo,
 			       struct ttm_placement *placement,
 			       struct ttm_mem_reg *mem)
 {
-	struct ttm_bo_global *glob = man->bdev->glob;
-	struct drm_mm *mm = man->priv;
+	struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv;
+	struct drm_mm *mm = &rman->mm;
 	struct drm_mm_node *node = NULL;
 	unsigned long lpfn;
 	int ret;
@@ -57,19 +66,19 @@ static int ttm_bo_man_get_node(struct ttm_mem_type_manager *man,
 		if (unlikely(ret))
 			return ret;
 
-		spin_lock(&glob->lru_lock);
+		spin_lock(&rman->lock);
 		node = drm_mm_search_free_in_range(mm,
 					mem->num_pages, mem->page_alignment,
 					placement->fpfn, lpfn, 1);
 		if (unlikely(node == NULL)) {
-			spin_unlock(&glob->lru_lock);
+			spin_unlock(&rman->lock);
 			return 0;
 		}
 		node = drm_mm_get_block_atomic_range(node, mem->num_pages,
-							mem->page_alignment,
-							placement->fpfn,
-							lpfn);
-		spin_unlock(&glob->lru_lock);
+						     mem->page_alignment,
+						     placement->fpfn,
+						     lpfn);
+		spin_unlock(&rman->lock);
 	} while (node == NULL);
 
 	mem->mm_node = node;
@@ -80,12 +89,12 @@ static int ttm_bo_man_get_node(struct ttm_mem_type_manager *man,
 static void ttm_bo_man_put_node(struct ttm_mem_type_manager *man,
 				struct ttm_mem_reg *mem)
 {
-	struct ttm_bo_global *glob = man->bdev->glob;
+	struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv;
 
 	if (mem->mm_node) {
-		spin_lock(&glob->lru_lock);
+		spin_lock(&rman->lock);
 		drm_mm_put_block(mem->mm_node);
-		spin_unlock(&glob->lru_lock);
+		spin_unlock(&rman->lock);
 		mem->mm_node = NULL;
 	}
 }
@@ -93,49 +102,49 @@ static void ttm_bo_man_put_node(struct ttm_mem_type_manager *man,
 static int ttm_bo_man_init(struct ttm_mem_type_manager *man,
 			   unsigned long p_size)
 {
-	struct drm_mm *mm;
+	struct ttm_range_manager *rman;
 	int ret;
 
-	mm = kzalloc(sizeof(*mm), GFP_KERNEL);
-	if (!mm)
+	rman = kzalloc(sizeof(*rman), GFP_KERNEL);
+	if (!rman)
 		return -ENOMEM;
 
-	ret = drm_mm_init(mm, 0, p_size);
+	ret = drm_mm_init(&rman->mm, 0, p_size);
 	if (ret) {
-		kfree(mm);
+		kfree(rman);
 		return ret;
 	}
 
-	man->priv = mm;
+	spin_lock_init(&rman->lock);
+	man->priv = rman;
 	return 0;
 }
 
 static int ttm_bo_man_takedown(struct ttm_mem_type_manager *man)
 {
-	struct ttm_bo_global *glob = man->bdev->glob;
-	struct drm_mm *mm = man->priv;
-	int ret = 0;
+	struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv;
+	struct drm_mm *mm = &rman->mm;
 
-	spin_lock(&glob->lru_lock);
+	spin_lock(&rman->lock);
 	if (drm_mm_clean(mm)) {
 		drm_mm_takedown(mm);
-		kfree(mm);
+		spin_unlock(&rman->lock);
+		kfree(rman);
 		man->priv = NULL;
-	} else
-		ret = -EBUSY;
-	spin_unlock(&glob->lru_lock);
-	return ret;
+		return 0;
+	}
+	spin_unlock(&rman->lock);
+	return -EBUSY;
 }
 
 static void ttm_bo_man_debug(struct ttm_mem_type_manager *man,
 			     const char *prefix)
 {
-	struct ttm_bo_global *glob = man->bdev->glob;
-	struct drm_mm *mm = man->priv;
+	struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv;
 
-	spin_lock(&glob->lru_lock);
-	drm_mm_debug_table(mm, prefix);
-	spin_unlock(&glob->lru_lock);
+	spin_lock(&rman->lock);
+	drm_mm_debug_table(&rman->mm, prefix);
+	spin_unlock(&rman->lock);
 }
 
 const struct ttm_mem_type_manager_func ttm_bo_manager_func = {

From 6e4c55db120b03d411e0eff7cd35f3edabbefe14 Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri, 29 Oct 2010 10:46:46 +0200
Subject: [PATCH 0284/1066] drm/ttm: Remove pointless list_empty check

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/ttm/ttm_bo.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index cf47978cf0e2..e6cedf43c2db 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -814,7 +814,6 @@ static int ttm_bo_mem_force_space(struct ttm_buffer_object *bo,
 					bool no_wait_gpu)
 {
 	struct ttm_bo_device *bdev = bo->bdev;
-	struct ttm_bo_global *glob = bdev->glob;
 	struct ttm_mem_type_manager *man = &bdev->man[mem_type];
 	int ret;
 
@@ -824,12 +823,6 @@ static int ttm_bo_mem_force_space(struct ttm_buffer_object *bo,
 			return ret;
 		if (mem->mm_node)
 			break;
-		spin_lock(&glob->lru_lock);
-		if (list_empty(&man->lru)) {
-			spin_unlock(&glob->lru_lock);
-			break;
-		}
-		spin_unlock(&glob->lru_lock);
 		ret = ttm_mem_evict_first(bdev, mem_type, interruptible,
 						no_wait_reserve, no_wait_gpu);
 		if (unlikely(ret != 0))

From dbc4a5b83585e89a6bce650d32426f61c8d4bca5 Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri, 29 Oct 2010 10:46:47 +0200
Subject: [PATCH 0285/1066] drm/ttm: Remove mm init error printouts and checks

Replace with BUG_ON(). These error messages remained from the time
when TTM was initialized from user-space. Nowadays hitting one of those
is really a kernel bug.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/ttm/ttm_bo.c | 20 ++------------------
 1 file changed, 2 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index e6cedf43c2db..f561eead057d 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -1354,18 +1354,9 @@ int ttm_bo_init_mm(struct ttm_bo_device *bdev, unsigned type,
 	int ret = -EINVAL;
 	struct ttm_mem_type_manager *man;
 
-	if (type >= TTM_NUM_MEM_TYPES) {
-		printk(KERN_ERR TTM_PFX "Illegal memory type %d\n", type);
-		return ret;
-	}
-
+	BUG_ON(type >= TTM_NUM_MEM_TYPES);
 	man = &bdev->man[type];
-	if (man->has_type) {
-		printk(KERN_ERR TTM_PFX
-		       "Memory manager already initialized for type %d\n",
-		       type);
-		return ret;
-	}
+	BUG_ON(man->has_type);
 
 	ret = bdev->driver->init_mem_type(bdev, type, man);
 	if (ret)
@@ -1374,13 +1365,6 @@ int ttm_bo_init_mm(struct ttm_bo_device *bdev, unsigned type,
 
 	ret = 0;
 	if (type != TTM_PL_SYSTEM) {
-		if (!p_size) {
-			printk(KERN_ERR TTM_PFX
-			       "Zero size memory manager type %d\n",
-			       type);
-			return ret;
-		}
-
 		ret = (*man->func->init)(man, p_size);
 		if (ret)
 			return ret;

From 06fba6d4168069d818593e2fcc2d4bd0f888e97b Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri, 29 Oct 2010 10:46:48 +0200
Subject: [PATCH 0286/1066] drm/ttm: Add a barrier when unreserving

Since we're doing this outside of a spinlock to provide the necessary
barriers, add an explicit barrier.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/ttm/ttm_bo.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index f561eead057d..a32fe41e5e24 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -37,6 +37,7 @@
 #include <linux/mm.h>
 #include <linux/file.h>
 #include <linux/module.h>
+#include <asm/atomic.h>
 
 #define TTM_ASSERT_LOCKED(param)
 #define TTM_DEBUG(fmt, arg...)
@@ -444,6 +445,11 @@ static void ttm_bo_cleanup_memtype_use(struct ttm_buffer_object *bo)
 	ttm_bo_mem_put(bo, &bo->mem);
 
 	atomic_set(&bo->reserved, 0);
+
+	/*
+	 * Make processes trying to reserve really pick it up.
+	 */
+	smp_mb__after_atomic_dec();
 	wake_up_all(&bo->event_queue);
 }
 

From 7dcebb52f6e0cd5150660a4c37f27cf4c0f1b9b9 Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri, 29 Oct 2010 10:46:49 +0200
Subject: [PATCH 0287/1066] drm/ttm: remove failed ttm binding error printout

The driver (for example vmwgfx) may want to silently deal with the
error itself.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/ttm/ttm_tt.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index a7bab87a548b..af789dc869b9 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -440,10 +440,8 @@ int ttm_tt_bind(struct ttm_tt *ttm, struct ttm_mem_reg *bo_mem)
 		return ret;
 
 	ret = be->func->bind(be, bo_mem);
-	if (ret) {
-		printk(KERN_ERR TTM_PFX "Couldn't bind backend.\n");
+	if (unlikely(ret != 0))
 		return ret;
-	}
 
 	ttm->state = tt_bound;
 

From c5d46b4e9f5604ba3e97986ffbd461d3cca79e8b Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Fri, 29 Oct 2010 13:49:25 -0400
Subject: [PATCH 0288/1066] drm/radeon/kms: make the connector code less
 verbose

Make more of the connector code debug only to avoid
spamming the kernel logs with detect and add modes
messages.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_connectors.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 4dac4b0a02ee..a9d541534796 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -183,13 +183,13 @@ radeon_connector_analog_encoder_conflict_solve(struct drm_connector *connector,
 					continue;
 
 				if (priority == true) {
-					DRM_INFO("1: conflicting encoders switching off %s\n", drm_get_connector_name(conflict));
-					DRM_INFO("in favor of %s\n", drm_get_connector_name(connector));
+					DRM_DEBUG_KMS("1: conflicting encoders switching off %s\n", drm_get_connector_name(conflict));
+					DRM_DEBUG_KMS("in favor of %s\n", drm_get_connector_name(connector));
 					conflict->status = connector_status_disconnected;
 					radeon_connector_update_scratch_regs(conflict, connector_status_disconnected);
 				} else {
-					DRM_INFO("2: conflicting encoders switching off %s\n", drm_get_connector_name(connector));
-					DRM_INFO("in favor of %s\n", drm_get_connector_name(conflict));
+					DRM_DEBUG_KMS("2: conflicting encoders switching off %s\n", drm_get_connector_name(connector));
+					DRM_DEBUG_KMS("in favor of %s\n", drm_get_connector_name(conflict));
 					current_status = connector_status_disconnected;
 				}
 				break;
@@ -432,13 +432,13 @@ static void radeon_fixup_lvds_native_mode(struct drm_encoder *encoder,
 			    mode->vdisplay == native_mode->vdisplay) {
 				*native_mode = *mode;
 				drm_mode_set_crtcinfo(native_mode, CRTC_INTERLACE_HALVE_V);
-				DRM_INFO("Determined LVDS native mode details from EDID\n");
+				DRM_DEBUG_KMS("Determined LVDS native mode details from EDID\n");
 				break;
 			}
 		}
 	}
 	if (!native_mode->clock) {
-		DRM_INFO("No LVDS native mode details, disabling RMX\n");
+		DRM_DEBUG_KMS("No LVDS native mode details, disabling RMX\n");
 		radeon_encoder->rmx_type = RMX_OFF;
 	}
 }

From 0ea75e23356f73b4300492e04a62c90787a55c2d Mon Sep 17 00:00:00 2001
From: Sam Tygier <samtygier@yahoo.co.uk>
Date: Thu, 23 Sep 2010 10:11:01 +0100
Subject: [PATCH 0289/1066] DRM: ignore invalid EDID extensions

Currently an invalid EDID extension will cause the whole EDID to be considered invalid. Instead just drop the invalid extensions, and return the valid ones. The base block is modified to claim to have the number valid extensions, and the check sum is updated.

For my EIZO S2242W the base block is fine, but the extension block is all zeros. Without this patch I get no X and no VTs.

Signed-off-by: Sam Tygier <samtygier@yahoo.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_edid.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index c1a26217a530..a245d17165ae 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -240,7 +240,7 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
 			.addr	= DDC_ADDR,
 			.flags	= I2C_M_RD,
 			.len	= len,
-			.buf	= buf + start,
+			.buf	= buf,
 		}
 	};
 
@@ -253,7 +253,7 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
 static u8 *
 drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
 {
-	int i, j = 0;
+	int i, j = 0, valid_extensions = 0;
 	u8 *block, *new;
 
 	if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
@@ -280,14 +280,28 @@ drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
 
 	for (j = 1; j <= block[0x7e]; j++) {
 		for (i = 0; i < 4; i++) {
-			if (drm_do_probe_ddc_edid(adapter, block, j,
-						  EDID_LENGTH))
+			if (drm_do_probe_ddc_edid(adapter,
+				  block + (valid_extensions + 1) * EDID_LENGTH,
+				  j, EDID_LENGTH))
 				goto out;
-			if (drm_edid_block_valid(block + j * EDID_LENGTH))
+			if (drm_edid_block_valid(block + (valid_extensions + 1) * EDID_LENGTH)) {
+				valid_extensions++;
 				break;
+			}
 		}
 		if (i == 4)
-			goto carp;
+			dev_warn(connector->dev->dev,
+			 "%s: Ignoring invalid EDID block %d.\n",
+			 drm_get_connector_name(connector), j);
+	}
+
+	if (valid_extensions != block[0x7e]) {
+		block[EDID_LENGTH-1] += block[0x7e] - valid_extensions;
+		block[0x7e] = valid_extensions;
+		new = krealloc(block, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL);
+		if (!new)
+			goto out;
+		block = new;
 	}
 
 	return block;

From 85b54e0c194fe216eb70cbce44365cef42cdc33e Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sun, 31 Oct 2010 22:33:53 +0000
Subject: [PATCH 0290/1066] drivers/gpu/drm/vmwgfx: Fix k.alloc switched
 arguments

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c     | 2 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
index a01c47ddb5bc..29113c9b26a8 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
@@ -557,7 +557,7 @@ int vmw_kms_init_legacy_display_system(struct vmw_private *dev_priv)
 		return -EINVAL;
 	}
 
-	dev_priv->ldu_priv = kmalloc(GFP_KERNEL, sizeof(*dev_priv->ldu_priv));
+	dev_priv->ldu_priv = kmalloc(sizeof(*dev_priv->ldu_priv), GFP_KERNEL);
 
 	if (!dev_priv->ldu_priv)
 		return -ENOMEM;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
index df2036ed18d5..f1a52f9e7298 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
@@ -585,7 +585,7 @@ int vmw_overlay_init(struct vmw_private *dev_priv)
 		return -ENOSYS;
 	}
 
-	overlay = kmalloc(GFP_KERNEL, sizeof(*overlay));
+	overlay = kmalloc(sizeof(*overlay), GFP_KERNEL);
 	if (!overlay)
 		return -ENOMEM;
 

From fce7d61be01ad7606056608be08fef15b70eeb84 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sat, 30 Oct 2010 21:08:30 +0000
Subject: [PATCH 0291/1066] drivers/gpu/drm: Update WARN uses

Coalesce long formats.
Align arguments.
Add missing newlines.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_crtc_helper.c     | 2 +-
 drivers/gpu/drm/i915/i915_gem.c       | 3 +--
 drivers/gpu/drm/radeon/evergreen.c    | 2 +-
 drivers/gpu/drm/radeon/r100.c         | 4 ++--
 drivers/gpu/drm/radeon/r300.c         | 2 +-
 drivers/gpu/drm/radeon/r600.c         | 4 ++--
 drivers/gpu/drm/radeon/radeon_fence.c | 3 ++-
 drivers/gpu/drm/radeon/radeon_ttm.c   | 3 ++-
 drivers/gpu/drm/radeon/rs400.c        | 2 +-
 drivers/gpu/drm/radeon/rs600.c        | 4 ++--
 10 files changed, 15 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index dcbeb98f195a..f7af91cb273d 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -276,7 +276,7 @@ static bool drm_encoder_crtc_ok(struct drm_encoder *encoder,
 	struct drm_crtc *tmp;
 	int crtc_mask = 1;
 
-	WARN(!crtc, "checking null crtc?");
+	WARN(!crtc, "checking null crtc?\n");
 
 	dev = crtc->dev;
 
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index eba9b1615228..ef188e391406 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -4065,8 +4065,7 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
 			alignment = i915_gem_get_gtt_alignment(obj);
 		if (obj_priv->gtt_offset & (alignment - 1)) {
 			WARN(obj_priv->pin_count,
-			     "bo is already pinned with incorrect alignment:"
-			     " offset=%x, req.alignment=%x\n",
+			     "bo is already pinned with incorrect alignment: offset=%x, req.alignment=%x\n",
 			     obj_priv->gtt_offset, alignment);
 			ret = i915_gem_object_unbind(obj);
 			if (ret)
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 9947fd51b6e2..488c36c8f5e6 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -2033,7 +2033,7 @@ int evergreen_irq_set(struct radeon_device *rdev)
 	u32 grbm_int_cntl = 0;
 
 	if (!rdev->irq.installed) {
-		WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+		WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
 		return -EINVAL;
 	}
 	/* don't enable anything if the ih is disabled */
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 0e8f28a68927..8e10aa9f74b0 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -442,7 +442,7 @@ int r100_pci_gart_init(struct radeon_device *rdev)
 	int r;
 
 	if (rdev->gart.table.ram.ptr) {
-		WARN(1, "R100 PCI GART already initialized.\n");
+		WARN(1, "R100 PCI GART already initialized\n");
 		return 0;
 	}
 	/* Initialize common gart structure */
@@ -516,7 +516,7 @@ int r100_irq_set(struct radeon_device *rdev)
 	uint32_t tmp = 0;
 
 	if (!rdev->irq.installed) {
-		WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+		WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
 		WREG32(R_000040_GEN_INT_CNTL, 0);
 		return -EINVAL;
 	}
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 34527e600fe9..cde1d3480d93 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -91,7 +91,7 @@ int rv370_pcie_gart_init(struct radeon_device *rdev)
 	int r;
 
 	if (rdev->gart.table.vram.robj) {
-		WARN(1, "RV370 PCIE GART already initialized.\n");
+		WARN(1, "RV370 PCIE GART already initialized\n");
 		return 0;
 	}
 	/* Initialize common gart structure */
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 33952a12f0a3..403e0df52a9d 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -919,7 +919,7 @@ int r600_pcie_gart_init(struct radeon_device *rdev)
 	int r;
 
 	if (rdev->gart.table.vram.robj) {
-		WARN(1, "R600 PCIE GART already initialized.\n");
+		WARN(1, "R600 PCIE GART already initialized\n");
 		return 0;
 	}
 	/* Initialize common gart structure */
@@ -2995,7 +2995,7 @@ int r600_irq_set(struct radeon_device *rdev)
 	u32 hdmi1, hdmi2;
 
 	if (!rdev->irq.installed) {
-		WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+		WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
 		return -EINVAL;
 	}
 	/* don't enable anything if the ih is disabled */
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 216392d0353b..daacb281dfaf 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -240,7 +240,8 @@ retry:
 		 */
 		if (seq == rdev->fence_drv.last_seq && radeon_gpu_is_lockup(rdev)) {
 			/* good news we believe it's a lockup */
-			WARN(1, "GPU lockup (waiting for 0x%08X last fence id 0x%08X)\n", fence->seq, seq);
+			WARN(1, "GPU lockup (waiting for 0x%08X last fence id 0x%08X)\n",
+			     fence->seq, seq);
 			/* FIXME: what should we do ? marking everyone
 			 * as signaled for now
 			 */
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index fe95bb35317e..01c2c736a1da 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -689,7 +689,8 @@ static int radeon_ttm_backend_bind(struct ttm_backend *backend,
 	gtt = container_of(backend, struct radeon_ttm_backend, backend);
 	gtt->offset = bo_mem->start << PAGE_SHIFT;
 	if (!gtt->num_pages) {
-		WARN(1, "nothing to bind %lu pages for mreg %p back %p!\n", gtt->num_pages, bo_mem, backend);
+		WARN(1, "nothing to bind %lu pages for mreg %p back %p!\n",
+		     gtt->num_pages, bo_mem, backend);
 	}
 	r = radeon_gart_bind(gtt->rdev, gtt->offset,
 			     gtt->num_pages, gtt->pages);
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index f683e51a2a06..5512e4e5e636 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -78,7 +78,7 @@ int rs400_gart_init(struct radeon_device *rdev)
 	int r;
 
 	if (rdev->gart.table.ram.ptr) {
-		WARN(1, "RS400 GART already initialized.\n");
+		WARN(1, "RS400 GART already initialized\n");
 		return 0;
 	}
 	/* Check gart size */
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index b091a1f6fa4e..f1c6e02c2e6b 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -375,7 +375,7 @@ int rs600_gart_init(struct radeon_device *rdev)
 	int r;
 
 	if (rdev->gart.table.vram.robj) {
-		WARN(1, "RS600 GART already initialized.\n");
+		WARN(1, "RS600 GART already initialized\n");
 		return 0;
 	}
 	/* Initialize common gart structure */
@@ -505,7 +505,7 @@ int rs600_irq_set(struct radeon_device *rdev)
 		~S_007D18_DC_HOT_PLUG_DETECT2_INT_EN(1);
 
 	if (!rdev->irq.installed) {
-		WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+		WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
 		WREG32(R_000040_GEN_INT_CNTL, 0);
 		return -EINVAL;
 	}

From a0ae5864d42b41c411368bd689462bf063c029c8 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Tue, 2 Nov 2010 05:26:48 +0000
Subject: [PATCH 0292/1066] drm/radeon/kms: don't disable shared encoders on
 pre-DCE3 display blocks

The A/B links aren't independantly useable on these blocks so when
we disable the encoders, make sure to only disable the encoder when
there is no connector using it.

Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=18564

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_encoders.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index ae58b6849a2e..b862be61c398 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -1547,6 +1547,23 @@ static void radeon_atom_encoder_disable(struct drm_encoder *encoder)
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	struct radeon_encoder_atom_dig *dig;
+
+	/* check for pre-DCE3 cards with shared encoders;
+	 * can't really use the links individually, so don't disable
+	 * the encoder if it's in use by another connector
+	 */
+	if (!ASIC_IS_DCE3(rdev)) {
+		struct drm_encoder *other_encoder;
+		struct radeon_encoder *other_radeon_encoder;
+
+		list_for_each_entry(other_encoder, &dev->mode_config.encoder_list, head) {
+			other_radeon_encoder = to_radeon_encoder(other_encoder);
+			if ((radeon_encoder->encoder_id == other_radeon_encoder->encoder_id) &&
+			    drm_helper_encoder_in_use(other_encoder))
+				goto disable_done;
+		}
+	}
+
 	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
 
 	switch (radeon_encoder->encoder_id) {
@@ -1586,6 +1603,7 @@ static void radeon_atom_encoder_disable(struct drm_encoder *encoder)
 		break;
 	}
 
+disable_done:
 	if (radeon_encoder_is_digital(encoder)) {
 		if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI)
 			r600_hdmi_disable(encoder);

From aa123268c2623c62e33248dafc0572f091689e86 Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue, 2 Nov 2010 13:21:47 +0000
Subject: [PATCH 0293/1066] drm/ttm: Make sure a sync object doesn't disappear
 while we use it

The sync object may disappear as soon as we release the bo::lock, so
take a reference on it while we use it.
One option would be to call sync_object_flush() before releasing the bo::lock,
but that would put an atomic requirement on that function.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/ttm/ttm_bo.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index a32fe41e5e24..340dfb11959d 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -458,7 +458,7 @@ static void ttm_bo_cleanup_refs_or_queue(struct ttm_buffer_object *bo)
 	struct ttm_bo_device *bdev = bo->bdev;
 	struct ttm_bo_global *glob = bo->glob;
 	struct ttm_bo_driver *driver;
-	void *sync_obj;
+	void *sync_obj = NULL;
 	void *sync_obj_arg;
 	int put_count;
 	int ret;
@@ -493,17 +493,20 @@ static void ttm_bo_cleanup_refs_or_queue(struct ttm_buffer_object *bo)
 		spin_lock(&glob->lru_lock);
 	}
 queue:
-	sync_obj = bo->sync_obj;
-	sync_obj_arg = bo->sync_obj_arg;
 	driver = bdev->driver;
+	if (bo->sync_obj)
+		sync_obj = driver->sync_obj_ref(bo->sync_obj);
+	sync_obj_arg = bo->sync_obj_arg;
 
 	kref_get(&bo->list_kref);
 	list_add_tail(&bo->ddestroy, &bdev->ddestroy);
 	spin_unlock(&glob->lru_lock);
 	spin_unlock(&bo->lock);
 
-	if (sync_obj)
+	if (sync_obj) {
 		driver->sync_obj_flush(sync_obj, sync_obj_arg);
+		driver->sync_obj_unref(&sync_obj);
+	}
 	schedule_delayed_work(&bdev->wq,
 			      ((HZ / 100) < 1) ? 1 : HZ / 100);
 }

From 29e190e049168b01dc5fa26d577ef99cafd753ee Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue, 2 Nov 2010 13:21:48 +0000
Subject: [PATCH 0294/1066] drm/ttm: Remove the CAP_SYS_ADMIN requirement for
 bo pinning

This breaks vmwgfx non-root EGL clients and is a remnant from the
TTM user-space interface. This test should be done in the driver.
Replace the remaining placement test with a BUG_ON, since triggering
it is a driver bug.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/ttm/ttm_bo.c | 30 ++----------------------------
 1 file changed, 2 insertions(+), 28 deletions(-)

diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 340dfb11959d..ce464579c485 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -1119,35 +1119,9 @@ EXPORT_SYMBOL(ttm_bo_validate);
 int ttm_bo_check_placement(struct ttm_buffer_object *bo,
 				struct ttm_placement *placement)
 {
-	int i;
+	BUG_ON((placement->fpfn || placement->lpfn) &&
+	       (bo->mem.num_pages > (placement->lpfn - placement->fpfn)));
 
-	if (placement->fpfn || placement->lpfn) {
-		if (bo->mem.num_pages > (placement->lpfn - placement->fpfn)) {
-			printk(KERN_ERR TTM_PFX "Page number range to small "
-				"Need %lu pages, range is [%u, %u]\n",
-				bo->mem.num_pages, placement->fpfn,
-				placement->lpfn);
-			return -EINVAL;
-		}
-	}
-	for (i = 0; i < placement->num_placement; i++) {
-		if (!capable(CAP_SYS_ADMIN)) {
-			if (placement->placement[i] & TTM_PL_FLAG_NO_EVICT) {
-				printk(KERN_ERR TTM_PFX "Need to be root to "
-					"modify NO_EVICT status.\n");
-				return -EINVAL;
-			}
-		}
-	}
-	for (i = 0; i < placement->num_busy_placement; i++) {
-		if (!capable(CAP_SYS_ADMIN)) {
-			if (placement->busy_placement[i] & TTM_PL_FLAG_NO_EVICT) {
-				printk(KERN_ERR TTM_PFX "Need to be root to "
-					"modify NO_EVICT status.\n");
-				return -EINVAL;
-			}
-		}
-	}
 	return 0;
 }
 

From 1ef0724dbd9c9e6f421a8987f58b8e034da43ec2 Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue, 2 Nov 2010 13:21:49 +0000
Subject: [PATCH 0295/1066] drm/vmwgfx: Fix oops on failing bo pin

When bo pin failed during modesetting,
vmwgfx would try to unref a non-existing buffer object.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index 87c6e6156d7d..cceeb42789b6 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -720,6 +720,8 @@ static int vmw_surface_dmabuf_pin(struct vmw_framebuffer *vfb)
 			       &vmw_vram_ne_placement,
 			       false, &vmw_dmabuf_bo_free);
 	vmw_overlay_resume_all(dev_priv);
+	if (unlikely(ret != 0))
+		vfbs->buffer = NULL;
 
 	return ret;
 }
@@ -730,6 +732,9 @@ static int vmw_surface_dmabuf_unpin(struct vmw_framebuffer *vfb)
 	struct vmw_framebuffer_surface *vfbs =
 		vmw_framebuffer_to_vfbs(&vfb->base);
 
+	if (unlikely(vfbs->buffer == NULL))
+		return 0;
+
 	bo = &vfbs->buffer->base;
 	ttm_bo_unref(&bo);
 	vfbs->buffer = NULL;

From ec3789ccccc4ded3b136ea93dec94b764b014525 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Fri, 5 Nov 2010 03:07:34 +0000
Subject: [PATCH 0296/1066] drivers/gpu: Use vzalloc

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/via/via_dmablit.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/via/via_dmablit.c b/drivers/gpu/drm/via/via_dmablit.c
index 9b5b4d9dd62c..3e038a394c51 100644
--- a/drivers/gpu/drm/via/via_dmablit.c
+++ b/drivers/gpu/drm/via/via_dmablit.c
@@ -235,9 +235,9 @@ via_lock_all_dma_pages(drm_via_sg_info_t *vsg,  drm_via_dmablit_t *xfer)
 	vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride - 1)) -
 		first_pfn + 1;
 
-	if (NULL == (vsg->pages = vmalloc(sizeof(struct page *) * vsg->num_pages)))
+	vsg->pages = vzalloc(sizeof(struct page *) * vsg->num_pages);
+	if (NULL == vsg->pages)
 		return -ENOMEM;
-	memset(vsg->pages, 0, sizeof(struct page *) * vsg->num_pages);
 	down_read(&current->mm->mmap_sem);
 	ret = get_user_pages(current, current->mm,
 			     (unsigned long)xfer->mem_addr,

From dccb2a952b1f0b51978fcb3f9899c7f46ffd4b28 Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Sat, 6 Nov 2010 14:41:16 +0000
Subject: [PATCH 0297/1066] drm: vmwgfx: fix information leak to userland

Structure drm_vmw_fence_rep is copied to userland with field "pad64"
uninitialized.  It leads to leaking of contents of kernel stack memory.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
index 51d9f9f1d7f2..76954e3528c1 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -691,6 +691,7 @@ int vmw_execbuf_ioctl(struct drm_device *dev, void *data,
 
 	fence_rep.error = ret;
 	fence_rep.fence_seq = (uint64_t) sequence;
+	fence_rep.pad64 = 0;
 
 	user_fence_rep = (struct drm_vmw_fence_rep __user *)
 	    (unsigned long)arg->fence_rep;

From fb939dfcf2a3a70357000617799925b6a11f9348 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Mon, 8 Nov 2010 16:08:29 +0000
Subject: [PATCH 0298/1066] drm/radeon/kms: add support for clock/data path
 routers

This is a follow on to:
26b5bc986423cf3887e09188cb662ed651c5374d
(drm/radeon/kms: add support for router objects)

That patch added support for systems that use a mux to control
the ddc line routing between the connectors.  This patch adds
support for systems that use a mux to control the encoder
clock and data path routing to the connectors.

Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=31339

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_atombios.c   | 26 ++++++++++----
 drivers/gpu/drm/radeon/radeon_connectors.c |  4 +--
 drivers/gpu/drm/radeon/radeon_display.c    | 18 ++++++----
 drivers/gpu/drm/radeon/radeon_encoders.c   |  8 +++++
 drivers/gpu/drm/radeon/radeon_i2c.c        | 41 +++++++++++++++++-----
 drivers/gpu/drm/radeon/radeon_mode.h       | 17 ++++++---
 6 files changed, 85 insertions(+), 29 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 04cac7ec9039..a1de975eec30 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -526,7 +526,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 	if (crev < 2)
 		return false;
 
-	router.valid = false;
+	router.ddc_valid = false;
+	router.cd_valid = false;
 
 	obj_header = (ATOM_OBJECT_HEADER *) (ctx->bios + data_offset);
 	path_obj = (ATOM_DISPLAY_OBJECT_PATH_TABLE *)
@@ -647,7 +648,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 								 usDeviceTag));
 
 				} else if (grph_obj_type == GRAPH_OBJECT_TYPE_ROUTER) {
-					router.valid = false;
+					router.ddc_valid = false;
+					router.cd_valid = false;
 					for (k = 0; k < router_obj->ucNumberOfObjects; k++) {
 						u16 router_obj_id = le16_to_cpu(router_obj->asObjects[j].usObjectID);
 						if (le16_to_cpu(path->usGraphicObjIds[j]) == router_obj_id) {
@@ -657,6 +659,7 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 							ATOM_I2C_RECORD *i2c_record;
 							ATOM_I2C_ID_CONFIG_ACCESS *i2c_config;
 							ATOM_ROUTER_DDC_PATH_SELECT_RECORD *ddc_path;
+							ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD *cd_path;
 							ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT *router_src_dst_table =
 								(ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT *)
 								(ctx->bios + data_offset +
@@ -690,10 +693,18 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 								case ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE:
 									ddc_path = (ATOM_ROUTER_DDC_PATH_SELECT_RECORD *)
 										record;
-									router.valid = true;
-									router.mux_type = ddc_path->ucMuxType;
-									router.mux_control_pin = ddc_path->ucMuxControlPin;
-									router.mux_state = ddc_path->ucMuxState[enum_id];
+									router.ddc_valid = true;
+									router.ddc_mux_type = ddc_path->ucMuxType;
+									router.ddc_mux_control_pin = ddc_path->ucMuxControlPin;
+									router.ddc_mux_state = ddc_path->ucMuxState[enum_id];
+									break;
+								case ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE:
+									cd_path = (ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD *)
+										record;
+									router.cd_valid = true;
+									router.cd_mux_type = cd_path->ucMuxType;
+									router.cd_mux_control_pin = cd_path->ucMuxControlPin;
+									router.cd_mux_state = cd_path->ucMuxState[enum_id];
 									break;
 								}
 								record = (ATOM_COMMON_RECORD_HEADER *)
@@ -860,7 +871,8 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct
 	size_t bc_size = sizeof(*bios_connectors) * ATOM_MAX_SUPPORTED_DEVICE;
 	struct radeon_router router;
 
-	router.valid = false;
+	router.ddc_valid = false;
+	router.cd_valid = false;
 
 	bios_connectors = kzalloc(bc_size, GFP_KERNEL);
 	if (!bios_connectors)
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index a9d541534796..fe6c74780f18 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -1116,7 +1116,7 @@ radeon_add_atom_connector(struct drm_device *dev,
 				radeon_connector->shared_ddc = true;
 				shared_ddc = true;
 			}
-			if (radeon_connector->router_bus && router->valid &&
+			if (radeon_connector->router_bus && router->ddc_valid &&
 			    (radeon_connector->router.router_id == router->router_id)) {
 				radeon_connector->shared_ddc = false;
 				shared_ddc = false;
@@ -1136,7 +1136,7 @@ radeon_add_atom_connector(struct drm_device *dev,
 	radeon_connector->connector_object_id = connector_object_id;
 	radeon_connector->hpd = *hpd;
 	radeon_connector->router = *router;
-	if (router->valid) {
+	if (router->ddc_valid || router->cd_valid) {
 		radeon_connector->router_bus = radeon_i2c_lookup(rdev, &router->i2c_info);
 		if (!radeon_connector->router_bus)
 			goto failed;
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 0383631da69c..1df4dc6c063c 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -315,10 +315,14 @@ static void radeon_print_display_setup(struct drm_device *dev)
 				 radeon_connector->ddc_bus->rec.en_data_reg,
 				 radeon_connector->ddc_bus->rec.y_clk_reg,
 				 radeon_connector->ddc_bus->rec.y_data_reg);
-			if (radeon_connector->router_bus)
+			if (radeon_connector->router.ddc_valid)
 				DRM_INFO("  DDC Router 0x%x/0x%x\n",
-					 radeon_connector->router.mux_control_pin,
-					 radeon_connector->router.mux_state);
+					 radeon_connector->router.ddc_mux_control_pin,
+					 radeon_connector->router.ddc_mux_state);
+			if (radeon_connector->router.cd_valid)
+				DRM_INFO("  Clock/Data Router 0x%x/0x%x\n",
+					 radeon_connector->router.cd_mux_control_pin,
+					 radeon_connector->router.cd_mux_state);
 		} else {
 			if (connector->connector_type == DRM_MODE_CONNECTOR_VGA ||
 			    connector->connector_type == DRM_MODE_CONNECTOR_DVII ||
@@ -398,8 +402,8 @@ int radeon_ddc_get_modes(struct radeon_connector *radeon_connector)
 	int ret = 0;
 
 	/* on hw with routers, select right port */
-	if (radeon_connector->router.valid)
-		radeon_router_select_port(radeon_connector);
+	if (radeon_connector->router.ddc_valid)
+		radeon_router_select_ddc_port(radeon_connector);
 
 	if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
 	    (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)) {
@@ -432,8 +436,8 @@ static int radeon_ddc_dump(struct drm_connector *connector)
 	int ret = 0;
 
 	/* on hw with routers, select right port */
-	if (radeon_connector->router.valid)
-		radeon_router_select_port(radeon_connector);
+	if (radeon_connector->router.ddc_valid)
+		radeon_router_select_ddc_port(radeon_connector);
 
 	if (!radeon_connector->ddc_bus)
 		return -1;
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index b862be61c398..f678257c42e6 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -1520,6 +1520,7 @@ radeon_atom_dac_detect(struct drm_encoder *encoder, struct drm_connector *connec
 static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
 {
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
 
 	if (radeon_encoder->active_device &
 	    (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) {
@@ -1531,6 +1532,13 @@ static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
 	radeon_atom_output_lock(encoder, true);
 	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
 
+	/* select the clock/data port if it uses a router */
+	if (connector) {
+		struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+		if (radeon_connector->router.cd_valid)
+			radeon_router_select_cd_port(radeon_connector);
+	}
+
 	/* this is needed for the pll/ss setup to work correctly in some cases */
 	atombios_set_encoder_crtc_source(encoder);
 }
diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c
index 6a13ee38a5b9..24b8a8be2cd4 100644
--- a/drivers/gpu/drm/radeon/radeon_i2c.c
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -53,8 +53,8 @@ bool radeon_ddc_probe(struct radeon_connector *radeon_connector)
 	};
 
 	/* on hw with routers, select right port */
-	if (radeon_connector->router.valid)
-		radeon_router_select_port(radeon_connector);
+	if (radeon_connector->router.ddc_valid)
+		radeon_router_select_ddc_port(radeon_connector);
 
 	ret = i2c_transfer(&radeon_connector->ddc_bus->adapter, msgs, 2);
 	if (ret == 2)
@@ -1084,26 +1084,51 @@ void radeon_i2c_put_byte(struct radeon_i2c_chan *i2c_bus,
 			  addr, val);
 }
 
-/* router switching */
-void radeon_router_select_port(struct radeon_connector *radeon_connector)
+/* ddc router switching */
+void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector)
 {
 	u8 val;
 
-	if (!radeon_connector->router.valid)
+	if (!radeon_connector->router.ddc_valid)
 		return;
 
 	radeon_i2c_get_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
 			    0x3, &val);
-	val &= radeon_connector->router.mux_control_pin;
+	val &= radeon_connector->router.ddc_mux_control_pin;
 	radeon_i2c_put_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
 			    0x3, val);
 	radeon_i2c_get_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
 			    0x1, &val);
-	val &= radeon_connector->router.mux_control_pin;
-	val |= radeon_connector->router.mux_state;
+	val &= radeon_connector->router.ddc_mux_control_pin;
+	val |= radeon_connector->router.ddc_mux_state;
+	radeon_i2c_put_byte(radeon_connector->router_bus,
+			    radeon_connector->router.i2c_addr,
+			    0x1, val);
+}
+
+/* clock/data router switching */
+void radeon_router_select_cd_port(struct radeon_connector *radeon_connector)
+{
+	u8 val;
+
+	if (!radeon_connector->router.cd_valid)
+		return;
+
+	radeon_i2c_get_byte(radeon_connector->router_bus,
+			    radeon_connector->router.i2c_addr,
+			    0x3, &val);
+	val &= radeon_connector->router.cd_mux_control_pin;
+	radeon_i2c_put_byte(radeon_connector->router_bus,
+			    radeon_connector->router.i2c_addr,
+			    0x3, val);
+	radeon_i2c_get_byte(radeon_connector->router_bus,
+			    radeon_connector->router.i2c_addr,
+			    0x1, &val);
+	val &= radeon_connector->router.cd_mux_control_pin;
+	val |= radeon_connector->router.cd_mux_state;
 	radeon_i2c_put_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
 			    0x1, val);
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 92457163d070..680f57644e86 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -401,13 +401,19 @@ struct radeon_hpd {
 };
 
 struct radeon_router {
-	bool valid;
 	u32 router_id;
 	struct radeon_i2c_bus_rec i2c_info;
 	u8 i2c_addr;
-	u8 mux_type;
-	u8 mux_control_pin;
-	u8 mux_state;
+	/* i2c mux */
+	bool ddc_valid;
+	u8 ddc_mux_type;
+	u8 ddc_mux_control_pin;
+	u8 ddc_mux_state;
+	/* clock/data mux */
+	bool cd_valid;
+	u8 cd_mux_type;
+	u8 cd_mux_control_pin;
+	u8 cd_mux_state;
 };
 
 struct radeon_connector {
@@ -488,7 +494,8 @@ extern void radeon_i2c_put_byte(struct radeon_i2c_chan *i2c,
 				u8 slave_addr,
 				u8 addr,
 				u8 val);
-extern void radeon_router_select_port(struct radeon_connector *radeon_connector);
+extern void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector);
+extern void radeon_router_select_cd_port(struct radeon_connector *radeon_connector);
 extern bool radeon_ddc_probe(struct radeon_connector *radeon_connector);
 extern int radeon_ddc_get_modes(struct radeon_connector *radeon_connector);
 

From bdd91b2b571c80dacfca88667d935f9907e62931 Mon Sep 17 00:00:00 2001
From: Tyson Whitehead <twhitehead@gmail.com>
Date: Mon, 8 Nov 2010 16:08:30 +0000
Subject: [PATCH 0299/1066] drm/radeon/kms: fix bugs in ddc and cd path router
 code

This is a follow on to:
2b5b1d7da9583484b3a9e7e375a90ca0e8ca07c2
(drm/radeon/kms: add support for clock/data path routers)

That patch completed mux support for ddc and cd line routing
between connectors.  This patch fixes an indexing typo that was
resulting in the atom bios router objects not always being walked,
ensures the validity entries for the reused router structure are
reset for every connector object walked, and corrects the masking
operations used to update the mux control bits.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=31339

Signed-off-by: Tyson Whitehead <twhitehead@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_atombios.c | 9 +++------
 drivers/gpu/drm/radeon/radeon_i2c.c      | 8 ++++----
 2 files changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index a1de975eec30..87ead090c7d5 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -526,9 +526,6 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 	if (crev < 2)
 		return false;
 
-	router.ddc_valid = false;
-	router.cd_valid = false;
-
 	obj_header = (ATOM_OBJECT_HEADER *) (ctx->bios + data_offset);
 	path_obj = (ATOM_DISPLAY_OBJECT_PATH_TABLE *)
 	    (ctx->bios + data_offset +
@@ -625,6 +622,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 			if (connector_type == DRM_MODE_CONNECTOR_Unknown)
 				continue;
 
+			router.ddc_valid = false;
+			router.cd_valid = false;
 			for (j = 0; j < ((le16_to_cpu(path->usSize) - 8) / 2); j++) {
 				uint8_t grph_obj_id, grph_obj_num, grph_obj_type;
 
@@ -648,10 +647,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 								 usDeviceTag));
 
 				} else if (grph_obj_type == GRAPH_OBJECT_TYPE_ROUTER) {
-					router.ddc_valid = false;
-					router.cd_valid = false;
 					for (k = 0; k < router_obj->ucNumberOfObjects; k++) {
-						u16 router_obj_id = le16_to_cpu(router_obj->asObjects[j].usObjectID);
+						u16 router_obj_id = le16_to_cpu(router_obj->asObjects[k].usObjectID);
 						if (le16_to_cpu(path->usGraphicObjIds[j]) == router_obj_id) {
 							ATOM_COMMON_RECORD_HEADER *record = (ATOM_COMMON_RECORD_HEADER *)
 								(ctx->bios + data_offset +
diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c
index 24b8a8be2cd4..0cfbba02c4d0 100644
--- a/drivers/gpu/drm/radeon/radeon_i2c.c
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -1095,14 +1095,14 @@ void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector)
 	radeon_i2c_get_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
 			    0x3, &val);
-	val &= radeon_connector->router.ddc_mux_control_pin;
+	val &= ~radeon_connector->router.ddc_mux_control_pin;
 	radeon_i2c_put_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
 			    0x3, val);
 	radeon_i2c_get_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
 			    0x1, &val);
-	val &= radeon_connector->router.ddc_mux_control_pin;
+	val &= ~radeon_connector->router.ddc_mux_control_pin;
 	val |= radeon_connector->router.ddc_mux_state;
 	radeon_i2c_put_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
@@ -1120,14 +1120,14 @@ void radeon_router_select_cd_port(struct radeon_connector *radeon_connector)
 	radeon_i2c_get_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
 			    0x3, &val);
-	val &= radeon_connector->router.cd_mux_control_pin;
+	val &= ~radeon_connector->router.cd_mux_control_pin;
 	radeon_i2c_put_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
 			    0x3, val);
 	radeon_i2c_get_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
 			    0x1, &val);
-	val &= radeon_connector->router.cd_mux_control_pin;
+	val &= ~radeon_connector->router.cd_mux_control_pin;
 	val |= radeon_connector->router.cd_mux_state;
 	radeon_i2c_put_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,

From b2298fd27127f872881048fd37cb9217a648ae06 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Mon, 8 Nov 2010 18:39:18 +0000
Subject: [PATCH 0300/1066] drm/radeon/kms: fix thermal sensor reporting on
 rv6xx

Temperature is not shifted as on newer asics.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/r600.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 403e0df52a9d..0f806cc7dc75 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -97,14 +97,8 @@ u32 rv6xx_get_temp(struct radeon_device *rdev)
 {
 	u32 temp = (RREG32(CG_THERMAL_STATUS) & ASIC_T_MASK) >>
 		ASIC_T_SHIFT;
-	u32 actual_temp = 0;
 
-	if ((temp >> 7) & 1)
-		actual_temp = 0;
-	else
-		actual_temp = (temp >> 1) & 0xff;
-
-	return actual_temp * 1000;
+	return temp * 1000;
 }
 
 void r600_pm_get_dynpm_state(struct radeon_device *rdev)

From 99870bd784ff9eb2405eab060125c0ded74968cd Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 8 Nov 2010 17:02:26 +0900
Subject: [PATCH 0301/1066] sh: intc: Fix up initializers for gcc 4.5.

The _INTC_ARRAY() initializer presently does a NULL test which blows up
as a non-constant initializer under gcc 4.5. This switches over to a type
test to account for NULL initializers explicitly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 include/linux/sh_intc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h
index f656d1a43dc0..5812fefbcedf 100644
--- a/include/linux/sh_intc.h
+++ b/include/linux/sh_intc.h
@@ -79,7 +79,7 @@ struct intc_hw_desc {
 	unsigned int nr_subgroups;
 };
 
-#define _INTC_ARRAY(a) a, a == NULL ? 0 : sizeof(a)/sizeof(*a)
+#define _INTC_ARRAY(a) a, __same_type(a, NULL) ? 0 : sizeof(a)/sizeof(*a)
 
 #define INTC_HW_DESC(vectors, groups, mask_regs,	\
 		     prio_regs,	sense_regs, ack_regs)	\

From 6e16edfe62eb49274c8a74dc04d1c6f315f8f82b Mon Sep 17 00:00:00 2001
From: Anand Gadiyar <gadiyar@ti.com>
Date: Mon, 8 Nov 2010 00:20:30 -0600
Subject: [PATCH 0302/1066] usb: musb: fail unaligned DMA transfers on v1.8 and
 above

The Inventra DMA engine in version 1.8 and later of the MUSB
controller cannot handle DMA addresses that are not aligned
to a 4 byte boundary. It ends up ignoring the last two bits
programmed in the DMA_ADDR register. This is a deliberate
design change in the controller and is documented in the
programming guide.

Earlier versions of the controller could handle these
accesses just fine.

Fail dma_channel_program if we see an unaligned address when
using the newer controllers, so that the caller can carry out
the transfer using PIO mode.
(Current callers already have this backup path in place).

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Tested-by: Ming Lei <tom.leiming@gmail.com>
Cc: Ajay Kumar Gupta <ajay.gupta@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musbhsdma.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 6f771af5cbdb..563114d613d6 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -158,6 +158,8 @@ static int dma_channel_program(struct dma_channel *channel,
 				dma_addr_t dma_addr, u32 len)
 {
 	struct musb_dma_channel *musb_channel = channel->private_data;
+	struct musb_dma_controller *controller = musb_channel->controller;
+	struct musb *musb = controller->private_data;
 
 	DBG(2, "ep%d-%s pkt_sz %d, dma_addr 0x%x length %d, mode %d\n",
 		musb_channel->epnum,
@@ -167,6 +169,18 @@ static int dma_channel_program(struct dma_channel *channel,
 	BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
 		channel->status == MUSB_DMA_STATUS_BUSY);
 
+	/*
+	 * The DMA engine in RTL1.8 and above cannot handle
+	 * DMA addresses that are not aligned to a 4 byte boundary.
+	 * It ends up masking the last two bits of the address
+	 * programmed in DMA_ADDR.
+	 *
+	 * Fail such DMA transfers, so that the backup PIO mode
+	 * can carry out the transfer
+	 */
+	if ((musb->hwvers >= MUSB_HWVERS_1800) && (dma_addr % 4))
+		return false;
+
 	channel->actual_len = 0;
 	musb_channel->start_addr = dma_addr;
 	musb_channel->len = len;

From 35bbe587d0959712b69540077c9e0fd27d3e6baf Mon Sep 17 00:00:00 2001
From: Dmitri Belimov <d.belimov@gmail.com>
Date: Tue, 26 Oct 2010 00:31:40 -0300
Subject: [PATCH 0303/1066] [media] saa7134: Fix autodetect for Behold A7 and
 H7 TV cards

The entries for those cards are after the generic entries,
so they don't work, in practice. Moving them to happen before the
generic entres fix the issue.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7134/saa7134-cards.c | 24 ++++++++++-----------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 10a6cbf6a790..0911cb580e18 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -6660,6 +6660,18 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.subvendor    = 0x13c2,
 		.subdevice    = 0x2804,
 		.driver_data  = SAA7134_BOARD_TECHNOTREND_BUDGET_T3000,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = 0x5ace, /* Beholder Intl. Ltd. */
+		.subdevice    = 0x7190,
+		.driver_data  = SAA7134_BOARD_BEHOLD_H7,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = 0x5ace, /* Beholder Intl. Ltd. */
+		.subdevice    = 0x7090,
+		.driver_data  = SAA7134_BOARD_BEHOLD_A7,
 	}, {
 		/* --- boards without eeprom + subsystem ID --- */
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
@@ -6698,18 +6710,6 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.subvendor    = PCI_ANY_ID,
 		.subdevice    = PCI_ANY_ID,
 		.driver_data  = SAA7134_BOARD_UNKNOWN,
-	}, {
-		.vendor       = PCI_VENDOR_ID_PHILIPS,
-		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
-		.subvendor    = 0x5ace, /* Beholder Intl. Ltd. */
-		.subdevice    = 0x7190,
-		.driver_data  = SAA7134_BOARD_BEHOLD_H7,
-	}, {
-		.vendor       = PCI_VENDOR_ID_PHILIPS,
-		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
-		.subvendor    = 0x5ace, /* Beholder Intl. Ltd. */
-		.subdevice    = 0x7090,
-		.driver_data  = SAA7134_BOARD_BEHOLD_A7,
 	},{
 		/* --- end of list --- */
 	}

From 35ac6f081f26e1b6b3482b9c8dfccebe7817c691 Mon Sep 17 00:00:00 2001
From: Jacob Pan <jacob.jun.pan@linux.intel.com>
Date: Tue, 9 Nov 2010 13:57:29 +0000
Subject: [PATCH 0304/1066] mmc: sdhci: Fix crash on boot with C0 stepping
 Moorestown platforms

SDHC2 is newly added in C0 stepping of Langwell. Without the Moorestown
specific quirk, the default pci_probe will be called and crash the kernel.

This patch unblocks the crash problem on C0 by using the same probing
function as HC1, which limits the number of slots to one.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 drivers/mmc/host/sdhci-pci.c | 20 ++++++++++++++------
 include/linux/pci_ids.h      |  1 +
 2 files changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index d196e77a93dc..3d9c2460d437 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -149,11 +149,11 @@ static const struct sdhci_pci_fixes sdhci_cafe = {
  * ADMA operation is disabled for Moorestown platform due to
  * hardware bugs.
  */
-static int mrst_hc1_probe(struct sdhci_pci_chip *chip)
+static int mrst_hc_probe(struct sdhci_pci_chip *chip)
 {
 	/*
-	 * slots number is fixed here for MRST as SDIO3 is never used and has
-	 * hardware bugs.
+	 * slots number is fixed here for MRST as SDIO3/5 are never used and
+	 * have hardware bugs.
 	 */
 	chip->num_slots = 1;
 	return 0;
@@ -163,9 +163,9 @@ static const struct sdhci_pci_fixes sdhci_intel_mrst_hc0 = {
 	.quirks		= SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
 };
 
-static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1 = {
+static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1_hc2 = {
 	.quirks		= SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
-	.probe		= mrst_hc1_probe,
+	.probe		= mrst_hc_probe,
 };
 
 static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = {
@@ -538,7 +538,15 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
 		.device		= PCI_DEVICE_ID_INTEL_MRST_SD1,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
-		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_MRST_SD2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
 	},
 
 	{
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c6bcfe93b9ca..d369b533dc2a 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2441,6 +2441,7 @@
 #define PCI_DEVICE_ID_INTEL_MFD_SDIO2	0x0822
 #define PCI_DEVICE_ID_INTEL_MFD_EMMC0	0x0823
 #define PCI_DEVICE_ID_INTEL_MFD_EMMC1	0x0824
+#define PCI_DEVICE_ID_INTEL_MRST_SD2	0x084F
 #define PCI_DEVICE_ID_INTEL_I960	0x0960
 #define PCI_DEVICE_ID_INTEL_I960RM	0x0962
 #define PCI_DEVICE_ID_INTEL_8257X_SOL	0x1062

From 3565bd46b1c6a3dbf1f670d3275aa4018a4c65ae Mon Sep 17 00:00:00 2001
From: Suresh Jayaraman <sjayaraman@suse.de>
Date: Tue, 9 Nov 2010 12:27:41 +0530
Subject: [PATCH 0305/1066] cifs: fix a memleak in cifs_setattr_nounix()

Andrew Hendry reported a kmemleak warning in 2.6.37-rc1 while editing a
text file with gedit over cifs.

unreferenced object 0xffff88022ee08b40 (size 32):
  comm "gedit", pid 2524, jiffies 4300160388 (age 2633.655s)
  hex dump (first 32 bytes):
    5c 2e 67 6f 75 74 70 75 74 73 74 72 65 61 6d 2d  \.goutputstream-
    35 42 41 53 4c 56 00 de 09 00 00 00 2c 26 78 ee  5BASLV......,&x.
  backtrace:
    [<ffffffff81504a4d>] kmemleak_alloc+0x2d/0x60
    [<ffffffff81136e13>] __kmalloc+0xe3/0x1d0
    [<ffffffffa0313db0>] build_path_from_dentry+0xf0/0x230 [cifs]
    [<ffffffffa031ae1e>] cifs_setattr+0x9e/0x770 [cifs]
    [<ffffffff8115fe90>] notify_change+0x170/0x2e0
    [<ffffffff81145ceb>] sys_fchmod+0x10b/0x140
    [<ffffffff8100c172>] system_call_fastpath+0x16/0x1b
    [<ffffffffffffffff>] 0xffffffffffffffff

The commit 1025774c that removed inode_setattr() seems to have introduced this
memleak by returning early without freeing 'full_path'.

Reported-by: Andrew Hendry <andrew.hendry@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/inode.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 39869c3c3efb..ef3a55bf86b6 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -2177,7 +2177,6 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs)
 
 	setattr_copy(inode, attrs);
 	mark_inode_dirty(inode);
-	return 0;
 
 cifs_setattr_exit:
 	kfree(full_path);

From 399d84655648b052c03301a71caa33758d906c2e Mon Sep 17 00:00:00 2001
From: Daniel Drake <dsd@laptop.org>
Date: Wed, 27 Oct 2010 10:45:32 -0300
Subject: [PATCH 0306/1066] [media] cafe_ccic: fix subdev configuration

For some reason, commit 1aafeb30104a is missing one change that was
included in the email submission.

The sensor configuration must be passed down to the ov7670 subdev.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cafe_ccic.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 2934770dacc3..7bc36670071a 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -2065,8 +2065,9 @@ static int cafe_pci_probe(struct pci_dev *pdev,
 		sensor_cfg.clock_speed = 45;
 
 	cam->sensor_addr = 0x42;
-	cam->sensor = v4l2_i2c_new_subdev(&cam->v4l2_dev, &cam->i2c_adapter,
-			NULL, "ov7670", cam->sensor_addr, NULL);
+	cam->sensor = v4l2_i2c_new_subdev_cfg(&cam->v4l2_dev, &cam->i2c_adapter,
+			"ov7670", "ov7670", 0, &sensor_cfg, cam->sensor_addr,
+			NULL);
 	if (cam->sensor == NULL) {
 		ret = -ENODEV;
 		goto out_smbus;

From 18943d292facbc70e6a36fc62399ae833f64671b Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Mon, 8 Nov 2010 11:15:54 +0000
Subject: [PATCH 0307/1066] inet: fix ip_mc_drop_socket()

commit 8723e1b4ad9be4444 (inet: RCU changes in inetdev_by_index())
forgot one call site in ip_mc_drop_socket()

We should not decrease idev refcount after inetdev_by_index() call,
since refcount is not increased anymore.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: Miles Lane <miles.lane@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/igmp.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index c8877c6c7216..3c53c2d89e3b 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -2306,10 +2306,8 @@ void ip_mc_drop_socket(struct sock *sk)
 
 		in_dev = inetdev_by_index(net, iml->multi.imr_ifindex);
 		(void) ip_mc_leave_src(sk, iml, in_dev);
-		if (in_dev != NULL) {
+		if (in_dev != NULL)
 			ip_mc_dec_group(in_dev, iml->multi.imr_multiaddr.s_addr);
-			in_dev_put(in_dev);
-		}
 		/* decrease mem now to avoid the memleak warning */
 		atomic_sub(sizeof(*iml), &sk->sk_omem_alloc);
 		call_rcu(&iml->rcu, ip_mc_socklist_reclaim);

From 53f57357ff0afc37804f4e82ee3123e0c0a2cad6 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?fran=C3=A7ois=20romieu?= <romieu@fr.zoreil.com>
Date: Mon, 8 Nov 2010 13:23:05 +0000
Subject: [PATCH 0308/1066] r8169: revert "Handle rxfifo errors on 8168 chips"

The original patch helps under obscure conditions (no pun) but
some 8168 do not like it. The change needs to be tightened with
a specific 8168 version.

This reverts commit 801e147cde02f04b5c2f42764cd43a89fc7400a2
("r8169: Handle rxfifo errors on 8168 chips").

Regression at https://bugzilla.kernel.org/show_bug.cgi?id=20882

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Andreas Radke <a.radke@arcor.de>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/r8169.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index d88ce9fb1cbd..3a0877e0f97c 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -2931,7 +2931,7 @@ static const struct rtl_cfg_info {
 		.hw_start	= rtl_hw_start_8168,
 		.region		= 2,
 		.align		= 8,
-		.intr_event	= SYSErr | RxFIFOOver | LinkChg | RxOverflow |
+		.intr_event	= SYSErr | LinkChg | RxOverflow |
 				  TxErr | TxOK | RxOK | RxErr,
 		.napi_event	= TxErr | TxOK | RxOK | RxOverflow,
 		.features	= RTL_FEATURE_GMII | RTL_FEATURE_MSI,
@@ -4588,7 +4588,8 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
 		}
 
 		/* Work around for rx fifo overflow */
-		if (unlikely(status & RxFIFOOver)) {
+		if (unlikely(status & RxFIFOOver) &&
+		(tp->mac_version == RTL_GIGA_MAC_VER_11)) {
 			netif_stop_queue(dev);
 			rtl8169_tx_timeout(dev);
 			break;

From ea80907ff066edd1dd43c5fe90ae6677d15e6384 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?fran=C3=A7ois=20romieu?= <romieu@fr.zoreil.com>
Date: Mon, 8 Nov 2010 13:23:58 +0000
Subject: [PATCH 0309/1066] r8169: fix sleeping while holding spinlock.

As device_set_wakeup_enable can now sleep, move the call to outside
the critical section.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/r8169.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 3a0877e0f97c..4c4d16905efb 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -846,10 +846,10 @@ static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	else
 		tp->features &= ~RTL_FEATURE_WOL;
 	__rtl8169_set_wol(tp, wol->wolopts);
-	device_set_wakeup_enable(&tp->pci_dev->dev, wol->wolopts);
-
 	spin_unlock_irq(&tp->lock);
 
+	device_set_wakeup_enable(&tp->pci_dev->dev, wol->wolopts);
+
 	return 0;
 }
 

From 4f52610e290eb6bf63522b0dad886ac88c7623cd Mon Sep 17 00:00:00 2001
From: Stefan Ringel <stefan.ringel@arcor.de>
Date: Wed, 27 Oct 2010 16:48:05 -0300
Subject: [PATCH 0310/1066] [media] tm6000: bugfix set tv standards

bugfix set tv standards

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/staging/tm6000/tm6000-video.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/tm6000/tm6000-video.c b/drivers/staging/tm6000/tm6000-video.c
index 9ec82796634e..c5690b2a8924 100644
--- a/drivers/staging/tm6000/tm6000-video.c
+++ b/drivers/staging/tm6000/tm6000-video.c
@@ -1032,6 +1032,7 @@ static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *norm)
 	struct tm6000_fh   *fh=priv;
 	struct tm6000_core *dev = fh->dev;
 
+	dev->norm = *norm;
 	rc = tm6000_init_analog_mode(dev);
 
 	fh->width  = dev->width;

From a8de6635799b58b52c610da9ee390a3e900e7bc7 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 5 Nov 2010 06:26:03 -0300
Subject: [PATCH 0311/1066] [media] ARM mx3_camera: check for DMA engine type

We have two dma engines in MX3 systems: The IPU and the SDMA
engine. We have to check if we got a channel from the correct
engine before proceeding with a channel.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mx3_camera.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index 29c5fc348133..aa871c2936b3 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -27,6 +27,7 @@
 
 #include <mach/ipu.h>
 #include <mach/mx3_camera.h>
+#include <mach/dma.h>
 
 #define MX3_CAM_DRV_NAME "mx3-camera"
 
@@ -638,6 +639,9 @@ static bool chan_filter(struct dma_chan *chan, void *arg)
 	struct dma_chan_request *rq = arg;
 	struct mx3_camera_pdata *pdata;
 
+	if (!imx_dma_is_ipu(chan))
+		return false;
+
 	if (!rq)
 		return false;
 

From 352f5d250ad395c678eebb2c9e1ad8b06114c6e9 Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Tue, 2 Nov 2010 12:08:51 -0300
Subject: [PATCH 0312/1066] [media] SoC Camera: OMAP1: update for recent
 framework changes

The recently added OMAP1 camera driver was not ready for one video queue per
device framework changes. Fix it.

Created and tested against linux-2.6.37-rc1.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/omap1_camera.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c
index 7c30e62b50db..5ec38f83585c 100644
--- a/drivers/media/video/omap1_camera.c
+++ b/drivers/media/video/omap1_camera.c
@@ -1386,7 +1386,7 @@ static void omap1_cam_init_videobuf(struct videobuf_queue *q,
 	}
 }
 
-static int omap1_cam_reqbufs(struct soc_camera_file *icf,
+static int omap1_cam_reqbufs(struct soc_camera_device *icd,
 			      struct v4l2_requestbuffers *p)
 {
 	int i;
@@ -1398,7 +1398,7 @@ static int omap1_cam_reqbufs(struct soc_camera_file *icf,
 	 * it hadn't triggered
 	 */
 	for (i = 0; i < p->count; i++) {
-		struct omap1_cam_buf *buf = container_of(icf->vb_vidq.bufs[i],
+		struct omap1_cam_buf *buf = container_of(icd->vb_vidq.bufs[i],
 						      struct omap1_cam_buf, vb);
 		buf->inwork = 0;
 		INIT_LIST_HEAD(&buf->vb.queue);
@@ -1485,10 +1485,10 @@ static int omap1_cam_set_bus_param(struct soc_camera_device *icd,
 
 static unsigned int omap1_cam_poll(struct file *file, poll_table *pt)
 {
-	struct soc_camera_file *icf = file->private_data;
+	struct soc_camera_device *icd = file->private_data;
 	struct omap1_cam_buf *buf;
 
-	buf = list_entry(icf->vb_vidq.stream.next, struct omap1_cam_buf,
+	buf = list_entry(icd->vb_vidq.stream.next, struct omap1_cam_buf,
 			 vb.stream);
 
 	poll_wait(file, &buf->vb.done, pt);

From c9a7ec8e543c105e3f661c2e290ce703d7d5d31e Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Tue, 9 Nov 2010 09:11:49 -0800
Subject: [PATCH 0313/1066] USB: the development of the usb tree is now in git

So change the MAINTAINERS file to properly reflect this.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0094224ca79b..5213f1f83ecc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6233,7 +6233,7 @@ USB SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
 S:	Supported
 F:	Documentation/usb/
 F:	drivers/net/usb/

From 97b5519b08086eec02f2241b6764d73f997014c9 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Tue, 9 Nov 2010 09:13:39 -0800
Subject: [PATCH 0314/1066] Staging: the MAINTAINERS git location was incorrect

The tree has moved to "staging-2.6" not "staging-next-2.6" as all of the
staging development is now done in git, not just for the next tree.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0094224ca79b..a17b26cd2eb1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5676,7 +5676,7 @@ S:	Maintained
 
 STAGING SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@suse.de>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6.git
 L:	devel@driverdev.osuosl.org
 S:	Maintained
 F:	drivers/staging/

From 8c66caebdace925f19fcfd2d1f026044c3995c4b Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Tue, 2 Nov 2010 12:22:32 -0300
Subject: [PATCH 0315/1066] [media] SoC Camera: OMAP1: update for recent
 videobuf changes

Recent locking related videobuf changes has not been incorporated into the new
OMAP1 camera driver. Fix it.

Created and tested against linux-2.6.37-rc1.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/omap1_camera.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c
index 5ec38f83585c..674f74e67443 100644
--- a/drivers/media/video/omap1_camera.c
+++ b/drivers/media/video/omap1_camera.c
@@ -235,7 +235,7 @@ static void free_buffer(struct videobuf_queue *vq, struct omap1_cam_buf *buf,
 
 	BUG_ON(in_interrupt());
 
-	videobuf_waiton(vb, 0, 0);
+	videobuf_waiton(vq, vb, 0, 0);
 
 	if (vb_mode == OMAP1_CAM_DMA_CONTIG) {
 		videobuf_dma_contig_free(vq, vb);
@@ -1365,12 +1365,12 @@ static void omap1_cam_init_videobuf(struct videobuf_queue *q,
 		videobuf_queue_dma_contig_init(q, &omap1_videobuf_ops,
 				icd->dev.parent, &pcdev->lock,
 				V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
-				sizeof(struct omap1_cam_buf), icd);
+				sizeof(struct omap1_cam_buf), icd, NULL);
 	else
 		videobuf_queue_sg_init(q, &omap1_videobuf_ops,
 				icd->dev.parent, &pcdev->lock,
 				V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
-				sizeof(struct omap1_cam_buf), icd);
+				sizeof(struct omap1_cam_buf), icd, NULL);
 
 	/* use videobuf mode (auto)selected with the module parameter */
 	pcdev->vb_mode = sg_mode ? OMAP1_CAM_DMA_SG : OMAP1_CAM_DMA_CONTIG;

From 3da39bca44d285d87e4a886c6de84e57bd8ef3bf Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Tue, 9 Nov 2010 09:15:40 -0800
Subject: [PATCH 0316/1066] tty: the development tree is now done in git

So properly mark it as such in the MAINTAINERS file.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 MAINTAINERS | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0094224ca79b..4c4373300f5f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -161,7 +161,7 @@ M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
 S:	Maintained
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
 F:	drivers/serial/8250*
 F:	include/linux/serial_8250.h
 
@@ -5910,7 +5910,7 @@ S:	Maintained
 TTY LAYER
 M:	Greg Kroah-Hartman <gregkh@suse.de>
 S:	Maintained
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
 F:	drivers/char/tty_*
 F:	drivers/serial/serial_core.c
 F:	include/linux/serial_core.h

From 4b35e625da69654a71515444c1c0a6b6ce84ad2f Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Tue, 2 Nov 2010 12:30:48 -0300
Subject: [PATCH 0317/1066] [media] SOC Camera: OMAP1: typo fix

Fix an outstanding typo in the recently added driver, as requested by
the subsystem maintainer.

Created against linux-2.6.37-rc1.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/omap1_camera.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c
index 674f74e67443..cbfd07f2d9da 100644
--- a/drivers/media/video/omap1_camera.c
+++ b/drivers/media/video/omap1_camera.c
@@ -504,7 +504,7 @@ static void omap1_videobuf_queue(struct videobuf_queue *vq,
 		 * empty. Since the transfer of the DMA programming register set
 		 * content to the DMA working register set is done automatically
 		 * by the DMA hardware, this can pretty well happen while we
-		 * are keeping the lock here. Levae fetching it from the queue
+		 * are keeping the lock here. Leave fetching it from the queue
 		 * to be done when a next DMA interrupt occures instead.
 		 */
 		return;

From d889eb1e0e371c15c24bd5c46dd2b18d5e3694e5 Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Tue, 2 Nov 2010 13:14:36 -0300
Subject: [PATCH 0318/1066] [media] SoC Camera: ov6650: minor cleanups

This is a followup patch that addresses two minor issues left in the recently
added ov6650 sensor driver, as I've promised to the subsystem maintainer:
- remove a pair of extra brackets,
- drop useless case for not possible v4l2_mbus_pixelcode enum value of 0.

Created against linux-2.6.37-rc1.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ov6650.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c
index b7cfeab0948c..31f19373bbae 100644
--- a/drivers/media/video/ov6650.c
+++ b/drivers/media/video/ov6650.c
@@ -754,7 +754,7 @@ static int ov6650_g_fmt(struct v4l2_subdev *sd,
 
 static bool is_unscaled_ok(int width, int height, struct v4l2_rect *rect)
 {
-	return (width > rect->width >> 1 || height > rect->height >> 1);
+	return width > rect->width >> 1 || height > rect->height >> 1;
 }
 
 static u8 to_clkrc(struct v4l2_fract *timeperframe,
@@ -840,8 +840,6 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
 		coma_mask |= COMA_BW | COMA_BYTE_SWAP | COMA_WORD_SWAP;
 		coma_set |= COMA_RAW_RGB | COMA_RGB;
 		break;
-	case 0:
-		break;
 	default:
 		dev_err(&client->dev, "Pixel format not handled: 0x%x\n", code);
 		return -EINVAL;

From 6b101926f98b54549128db4d34f4a73b5f03fecc Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 8 Nov 2010 17:52:45 -0300
Subject: [PATCH 0319/1066] [media] soc-camera: Compile fixes for mx2-camera

mx2-camera got broken during the last merge window. This patch
fixes this and removes some unused variables.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mx2_camera.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
index 4a27862da30d..072bd2d1cfad 100644
--- a/drivers/media/video/mx2_camera.c
+++ b/drivers/media/video/mx2_camera.c
@@ -31,6 +31,7 @@
 
 #include <media/v4l2-common.h>
 #include <media/v4l2-dev.h>
+#include <media/videobuf-core.h>
 #include <media/videobuf-dma-contig.h>
 #include <media/soc_camera.h>
 #include <media/soc_mediabus.h>
@@ -903,8 +904,6 @@ static int mx2_camera_set_crop(struct soc_camera_device *icd,
 static int mx2_camera_set_fmt(struct soc_camera_device *icd,
 			       struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	struct mx2_camera_dev *pcdev = ici->priv;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_format_xlate *xlate;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
@@ -943,8 +942,6 @@ static int mx2_camera_set_fmt(struct soc_camera_device *icd,
 static int mx2_camera_try_fmt(struct soc_camera_device *icd,
 				  struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	struct mx2_camera_dev *pcdev = ici->priv;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_format_xlate *xlate;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
@@ -1024,13 +1021,13 @@ static int mx2_camera_querycap(struct soc_camera_host *ici,
 	return 0;
 }
 
-static int mx2_camera_reqbufs(struct soc_camera_file *icf,
+static int mx2_camera_reqbufs(struct soc_camera_device *icd,
 			      struct v4l2_requestbuffers *p)
 {
 	int i;
 
 	for (i = 0; i < p->count; i++) {
-		struct mx2_buffer *buf = container_of(icf->vb_vidq.bufs[i],
+		struct mx2_buffer *buf = container_of(icd->vb_vidq.bufs[i],
 						      struct mx2_buffer, vb);
 		INIT_LIST_HEAD(&buf->vb.queue);
 	}
@@ -1151,9 +1148,9 @@ err_out:
 
 static unsigned int mx2_camera_poll(struct file *file, poll_table *pt)
 {
-	struct soc_camera_file *icf = file->private_data;
+	struct soc_camera_device *icd = file->private_data;
 
-	return videobuf_poll_stream(file, &icf->vb_vidq, pt);
+	return videobuf_poll_stream(file, &icd->vb_vidq, pt);
 }
 
 static struct soc_camera_host_ops mx2_soc_camera_host_ops = {

From 88f8a5e3e7defccd3925cabb1ee4d3994e5cdb52 Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Sun, 31 Oct 2010 07:10:32 +0000
Subject: [PATCH 0320/1066] net: tipc: fix information leak to userland

Structure sockaddr_tipc is copied to userland with padding bytes after
"id" field in union field "name" unitialized.  It leads to leaking of
contents of kernel stack memory.  We have to initialize them to zero.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/tipc/socket.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 33217fc3d697..e9f0d5004483 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -396,6 +396,7 @@ static int get_name(struct socket *sock, struct sockaddr *uaddr,
 	struct sockaddr_tipc *addr = (struct sockaddr_tipc *)uaddr;
 	struct tipc_sock *tsock = tipc_sk(sock->sk);
 
+	memset(addr, 0, sizeof(*addr));
 	if (peer) {
 		if ((sock->state != SS_CONNECTED) &&
 			((peer != 2) || (sock->state != SS_DISCONNECTING)))

From 0059b2436a86fedb2747f654f8e10a67e97d8614 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@linux.intel.com>
Date: Mon, 8 Nov 2010 22:20:29 +0100
Subject: [PATCH 0321/1066] x86: Address gcc4.6 "set but not used" warnings in
 apic.h

native_apic_msr_read() and x2apic_enabled() use rdmsr(msr, low, high),
but only use the low part.

gcc4.6 complains about this:
.../apic.h:144:11: warning: variable 'high' set but not used [-Wunused-but-set-variable]

rdmsr() is just a wrapper around rdmsrl() which splits the 64bit value
into low and high, so using rdmsrl() directly solves this.

[tglx: Changed the variables to u64 as suggested by Cyrill. It's less
       confusing and has no code impact as this is 64bit only anyway.
       Massaged changelog as well. ]

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: x86@kernel.org
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
LKML-Reference: <1289251229-19589-1-git-send-email-andi@firstfloor.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/apic.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 286de34b0ed6..f6ce0bda3b98 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -141,13 +141,13 @@ static inline void native_apic_msr_write(u32 reg, u32 v)
 
 static inline u32 native_apic_msr_read(u32 reg)
 {
-	u32 low, high;
+	u64 msr;
 
 	if (reg == APIC_DFR)
 		return -1;
 
-	rdmsr(APIC_BASE_MSR + (reg >> 4), low, high);
-	return low;
+	rdmsrl(APIC_BASE_MSR + (reg >> 4), msr);
+	return (u32)msr;
 }
 
 static inline void native_x2apic_wait_icr_idle(void)
@@ -181,12 +181,12 @@ extern void enable_x2apic(void);
 extern void x2apic_icr_write(u32 low, u32 id);
 static inline int x2apic_enabled(void)
 {
-	int msr, msr2;
+	u64 msr;
 
 	if (!cpu_has_x2apic)
 		return 0;
 
-	rdmsr(MSR_IA32_APICBASE, msr, msr2);
+	rdmsrl(MSR_IA32_APICBASE, msr);
 	if (msr & X2APIC_ENABLE)
 		return 1;
 	return 0;

From 63bfd7384b119409685a17d5c58f0b56e5dc03da Mon Sep 17 00:00:00 2001
From: Pekka Enberg <penberg@kernel.org>
Date: Mon, 8 Nov 2010 21:29:07 +0200
Subject: [PATCH 0322/1066] perf_events: Fix perf_counter_mmap() hook in
 mprotect()

As pointed out by Linus, commit dab5855 ("perf_counter: Add mmap event hooks to
mprotect()") is fundamentally wrong as mprotect_fixup() can free 'vma' due to
merging. Fix the problem by moving perf_event_mmap() hook to
mprotect_fixup().

Note: there's another successful return path from mprotect_fixup() if old
flags equal to new flags. We don't, however, need to call
perf_event_mmap() there because 'perf' already knows the VMA is
executable.

Reported-by: Dave Jones <davej@redhat.com>
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/mprotect.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/mprotect.c b/mm/mprotect.c
index 2d1bf7cf8851..4c5133873097 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -211,6 +211,7 @@ success:
 	mmu_notifier_invalidate_range_end(mm, start, end);
 	vm_stat_account(mm, oldflags, vma->vm_file, -nrpages);
 	vm_stat_account(mm, newflags, vma->vm_file, nrpages);
+	perf_event_mmap(vma);
 	return 0;
 
 fail:
@@ -299,7 +300,6 @@ SYSCALL_DEFINE3(mprotect, unsigned long, start, size_t, len,
 		error = mprotect_fixup(vma, &prev, nstart, tmp, newflags);
 		if (error)
 			goto out;
-		perf_event_mmap(vma);
 		nstart = tmp;
 
 		if (nstart < prev->vm_end)

From 7379efeacb707f49729080791a7a562d8996aec4 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Mon, 8 Nov 2010 18:45:21 -0800
Subject: [PATCH 0323/1066] iwlwifi: dont use pci_dev before it being assign

In order to use build-in debugging macro, pci_dev in priv need to be
assigned first.

This fix iwl3945 driver oopsed at boot with 2.6.37-rc1

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl3945-base.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 8f8c4b73f8b9..7edf8c2fb8c7 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -4000,7 +4000,8 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	 * "the hard way", rather than using device's scan.
 	 */
 	if (iwl3945_mod_params.disable_hw_scan) {
-		IWL_ERR(priv, "sw scan support is deprecated\n");
+		dev_printk(KERN_DEBUG, &(pdev->dev),
+			"sw scan support is deprecated\n");
 		iwl3945_hw_ops.hw_scan = NULL;
 	}
 

From 332dd96f7ac15e937088fe11f15cfe0210e8edd1 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Tue, 9 Nov 2010 11:46:33 -0800
Subject: [PATCH 0324/1066] net/dst: dst_dev_event() called after other
 notifiers

Followup of commit ef885afbf8a37689 (net: use rcu_barrier() in
rollback_registered_many)

dst_dev_event() scans a garbage dst list that might be feeded by various
network notifiers at device dismantle time.

Its important to call dst_dev_event() after other notifiers, or we might
enter the infamous msleep(250) in netdev_wait_allrefs(), and wait one
second before calling again call_netdevice_notifiers(NETDEV_UNREGISTER,
dev) to properly remove last device references.

Use priority -10 to let dst_dev_notifier be called after other network
notifiers (they have the default 0 priority)

Reported-by: Ben Greear <greearb@candelatech.com>
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reported-by: Octavian Purdila <opurdila@ixiacom.com>
Reported-by: Benjamin LaHaise <bcrl@kvack.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/dst.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/core/dst.c b/net/core/dst.c
index 8abe628b79f1..b99c7c7ffce2 100644
--- a/net/core/dst.c
+++ b/net/core/dst.c
@@ -370,6 +370,7 @@ static int dst_dev_event(struct notifier_block *this, unsigned long event,
 
 static struct notifier_block dst_dev_notifier = {
 	.notifier_call	= dst_dev_event,
+	.priority = -10, /* must be called after other network notifiers */
 };
 
 void __init dst_init(void)

From e98b6fed84d0f0155d7b398e0dfeac74c792f2d0 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Tue, 9 Nov 2010 12:24:53 -0800
Subject: [PATCH 0325/1066] ceph: fix comment, remove extraneous args

The offset/length arguments aren't used.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/file.c               | 20 +++++++++-----------
 include/linux/ceph/libceph.h |  3 +--
 net/ceph/pagevec.c           |  3 +--
 3 files changed, 11 insertions(+), 15 deletions(-)

diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 87ee944724f8..603fd00af0a6 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -376,21 +376,19 @@ static ssize_t ceph_sync_read(struct file *file, char __user *data,
 	dout("sync_read on file %p %llu~%u %s\n", file, off, len,
 	     (file->f_flags & O_DIRECT) ? "O_DIRECT" : "");
 
-	if (file->f_flags & O_DIRECT) {
-		pages = ceph_get_direct_page_vector(data, num_pages, off, len);
-
-		/*
-		 * flush any page cache pages in this range.  this
-		 * will make concurrent normal and O_DIRECT io slow,
-		 * but it will at least behave sensibly when they are
-		 * in sequence.
-		 */
-	} else {
+	if (file->f_flags & O_DIRECT)
+		pages = ceph_get_direct_page_vector(data, num_pages);
+	else
 		pages = ceph_alloc_page_vector(num_pages, GFP_NOFS);
-	}
 	if (IS_ERR(pages))
 		return PTR_ERR(pages);
 
+	/*
+	 * flush any page cache pages in this range.  this
+	 * will make concurrent normal and sync io slow,
+	 * but it will at least behave sensibly when they are
+	 * in sequence.
+	 */
 	ret = filemap_write_and_wait(inode->i_mapping);
 	if (ret < 0)
 		goto done;
diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h
index f22b2e941686..9e76d35670d2 100644
--- a/include/linux/ceph/libceph.h
+++ b/include/linux/ceph/libceph.h
@@ -227,8 +227,7 @@ extern int ceph_open_session(struct ceph_client *client);
 extern void ceph_release_page_vector(struct page **pages, int num_pages);
 
 extern struct page **ceph_get_direct_page_vector(const char __user *data,
-					    int num_pages,
-					    loff_t off, size_t len);
+						 int num_pages);
 extern void ceph_put_page_vector(struct page **pages, int num_pages);
 extern void ceph_release_page_vector(struct page **pages, int num_pages);
 extern struct page **ceph_alloc_page_vector(int num_pages, gfp_t flags);
diff --git a/net/ceph/pagevec.c b/net/ceph/pagevec.c
index 54caf0687155..ac34feeb2b3a 100644
--- a/net/ceph/pagevec.c
+++ b/net/ceph/pagevec.c
@@ -13,8 +13,7 @@
  * build a vector of user pages
  */
 struct page **ceph_get_direct_page_vector(const char __user *data,
-						 int num_pages,
-						 loff_t off, size_t len)
+					  int num_pages)
 {
 	struct page **pages;
 	int rc;

From b7495fc2ff941db6a118a93ab8d61149e3f4cef8 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Tue, 9 Nov 2010 12:43:12 -0800
Subject: [PATCH 0326/1066] ceph: make page alignment explicit in osd interface

We used to infer alignment of IOs within a page based on the file offset,
which assumed they matched.  This broke with direct IO that was not aligned
to pages (e.g., 512-byte aligned IO).  We were also trusting the alignment
specified in the OSD reply, which could have been adjusted by the server.

Explicitly specify the page alignment when setting up OSD IO requests.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/addr.c                  |  6 +++---
 fs/ceph/file.c                  | 26 +++++++++++++++++++++-----
 fs/ceph/inode.c                 |  2 +-
 include/linux/ceph/osd_client.h |  7 +++++--
 net/ceph/osd_client.c           | 22 ++++++++++++++--------
 5 files changed, 44 insertions(+), 19 deletions(-)

diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index 51bcc5ce3230..4aa857763037 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -204,7 +204,7 @@ static int readpage_nounlock(struct file *filp, struct page *page)
 	err = ceph_osdc_readpages(osdc, ceph_vino(inode), &ci->i_layout,
 				  page->index << PAGE_CACHE_SHIFT, &len,
 				  ci->i_truncate_seq, ci->i_truncate_size,
-				  &page, 1);
+				  &page, 1, 0);
 	if (err == -ENOENT)
 		err = 0;
 	if (err < 0) {
@@ -287,7 +287,7 @@ static int ceph_readpages(struct file *file, struct address_space *mapping,
 	rc = ceph_osdc_readpages(osdc, ceph_vino(inode), &ci->i_layout,
 				 offset, &len,
 				 ci->i_truncate_seq, ci->i_truncate_size,
-				 pages, nr_pages);
+				 pages, nr_pages, 0);
 	if (rc == -ENOENT)
 		rc = 0;
 	if (rc < 0)
@@ -782,7 +782,7 @@ get_more_pages:
 					    snapc, do_sync,
 					    ci->i_truncate_seq,
 					    ci->i_truncate_size,
-					    &inode->i_mtime, true, 1);
+					    &inode->i_mtime, true, 1, 0);
 				max_pages = req->r_num_pages;
 
 				alloc_page_vec(fsc, req);
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 603fd00af0a6..8d79b8912e31 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -282,11 +282,12 @@ int ceph_release(struct inode *inode, struct file *file)
 static int striped_read(struct inode *inode,
 			u64 off, u64 len,
 			struct page **pages, int num_pages,
-			int *checkeof)
+			int *checkeof, bool align_to_pages)
 {
 	struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	u64 pos, this_len;
+	int io_align, page_align;
 	int page_off = off & ~PAGE_CACHE_MASK; /* first byte's offset in page */
 	int left, pages_left;
 	int read;
@@ -302,14 +303,19 @@ static int striped_read(struct inode *inode,
 	page_pos = pages;
 	pages_left = num_pages;
 	read = 0;
+	io_align = off & ~PAGE_MASK;
 
 more:
+	if (align_to_pages)
+		page_align = (pos - io_align) & ~PAGE_MASK;
+	else
+		page_align = pos & ~PAGE_MASK;
 	this_len = left;
 	ret = ceph_osdc_readpages(&fsc->client->osdc, ceph_vino(inode),
 				  &ci->i_layout, pos, &this_len,
 				  ci->i_truncate_seq,
 				  ci->i_truncate_size,
-				  page_pos, pages_left);
+				  page_pos, pages_left, page_align);
 	hit_stripe = this_len < left;
 	was_short = ret >= 0 && ret < this_len;
 	if (ret == -ENOENT)
@@ -393,7 +399,8 @@ static ssize_t ceph_sync_read(struct file *file, char __user *data,
 	if (ret < 0)
 		goto done;
 
-	ret = striped_read(inode, off, len, pages, num_pages, checkeof);
+	ret = striped_read(inode, off, len, pages, num_pages, checkeof,
+			   file->f_flags & O_DIRECT);
 
 	if (ret >= 0 && (file->f_flags & O_DIRECT) == 0)
 		ret = ceph_copy_page_vector_to_user(pages, data, off, ret);
@@ -448,6 +455,7 @@ static ssize_t ceph_sync_write(struct file *file, const char __user *data,
 	int flags;
 	int do_sync = 0;
 	int check_caps = 0;
+	int page_align, io_align;
 	int ret;
 	struct timespec mtime = CURRENT_TIME;
 
@@ -462,6 +470,8 @@ static ssize_t ceph_sync_write(struct file *file, const char __user *data,
 	else
 		pos = *offset;
 
+	io_align = pos & ~PAGE_MASK;
+
 	ret = filemap_write_and_wait_range(inode->i_mapping, pos, pos + left);
 	if (ret < 0)
 		return ret;
@@ -486,20 +496,26 @@ static ssize_t ceph_sync_write(struct file *file, const char __user *data,
 	 */
 more:
 	len = left;
+	if (file->f_flags & O_DIRECT)
+		/* write from beginning of first page, regardless of
+		   io alignment */
+		page_align = (pos - io_align) & ~PAGE_MASK;
+	else
+		page_align = pos & ~PAGE_MASK;
 	req = ceph_osdc_new_request(&fsc->client->osdc, &ci->i_layout,
 				    ceph_vino(inode), pos, &len,
 				    CEPH_OSD_OP_WRITE, flags,
 				    ci->i_snap_realm->cached_context,
 				    do_sync,
 				    ci->i_truncate_seq, ci->i_truncate_size,
-				    &mtime, false, 2);
+				    &mtime, false, 2, page_align);
 	if (!req)
 		return -ENOMEM;
 
 	num_pages = calc_pages_for(pos, len);
 
 	if (file->f_flags & O_DIRECT) {
-		pages = ceph_get_direct_page_vector(data, num_pages, pos, len);
+		pages = ceph_get_direct_page_vector(data, num_pages);
 		if (IS_ERR(pages)) {
 			ret = PTR_ERR(pages);
 			goto out;
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 7bc0fbd26af2..8153ee5a8d74 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -1752,7 +1752,7 @@ int ceph_do_getattr(struct inode *inode, int mask)
 		return 0;
 	}
 
-	dout("do_getattr inode %p mask %s\n", inode, ceph_cap_string(mask));
+	dout("do_getattr inode %p mask %s mode 0%o\n", inode, ceph_cap_string(mask), inode->i_mode);
 	if (ceph_caps_issued_mask(ceph_inode(inode), mask, 1))
 		return 0;
 
diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h
index 6c91fb032c39..a1af29648fb5 100644
--- a/include/linux/ceph/osd_client.h
+++ b/include/linux/ceph/osd_client.h
@@ -79,6 +79,7 @@ struct ceph_osd_request {
 	struct ceph_file_layout r_file_layout;
 	struct ceph_snap_context *r_snapc;    /* snap context for writes */
 	unsigned          r_num_pages;        /* size of page array (follows) */
+	unsigned          r_page_alignment;   /* io offset in first page */
 	struct page     **r_pages;            /* pages for data payload */
 	int               r_pages_from_pool;
 	int               r_own_pages;        /* if true, i own page list */
@@ -194,7 +195,8 @@ extern struct ceph_osd_request *ceph_osdc_new_request(struct ceph_osd_client *,
 				      int do_sync, u32 truncate_seq,
 				      u64 truncate_size,
 				      struct timespec *mtime,
-				      bool use_mempool, int num_reply);
+				      bool use_mempool, int num_reply,
+				      int page_align);
 
 static inline void ceph_osdc_get_request(struct ceph_osd_request *req)
 {
@@ -218,7 +220,8 @@ extern int ceph_osdc_readpages(struct ceph_osd_client *osdc,
 			       struct ceph_file_layout *layout,
 			       u64 off, u64 *plen,
 			       u32 truncate_seq, u64 truncate_size,
-			       struct page **pages, int nr_pages);
+			       struct page **pages, int nr_pages,
+			       int page_align);
 
 extern int ceph_osdc_writepages(struct ceph_osd_client *osdc,
 				struct ceph_vino vino,
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 79391994b3ed..6c096239660c 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -71,6 +71,7 @@ void ceph_calc_raw_layout(struct ceph_osd_client *osdc,
 		op->extent.length = objlen;
 	}
 	req->r_num_pages = calc_pages_for(off, *plen);
+	req->r_page_alignment = off & ~PAGE_MASK;
 	if (op->op == CEPH_OSD_OP_WRITE)
 		op->payload_len = *plen;
 
@@ -419,7 +420,8 @@ struct ceph_osd_request *ceph_osdc_new_request(struct ceph_osd_client *osdc,
 					       u32 truncate_seq,
 					       u64 truncate_size,
 					       struct timespec *mtime,
-					       bool use_mempool, int num_reply)
+					       bool use_mempool, int num_reply,
+					       int page_align)
 {
 	struct ceph_osd_req_op ops[3];
 	struct ceph_osd_request *req;
@@ -447,6 +449,10 @@ struct ceph_osd_request *ceph_osdc_new_request(struct ceph_osd_client *osdc,
 	calc_layout(osdc, vino, layout, off, plen, req, ops);
 	req->r_file_layout = *layout;  /* keep a copy */
 
+	/* in case it differs from natural alignment that calc_layout
+	   filled in for us */
+	req->r_page_alignment = page_align;
+
 	ceph_osdc_build_request(req, off, plen, ops,
 				snapc,
 				mtime,
@@ -1489,7 +1495,7 @@ int ceph_osdc_readpages(struct ceph_osd_client *osdc,
 			struct ceph_vino vino, struct ceph_file_layout *layout,
 			u64 off, u64 *plen,
 			u32 truncate_seq, u64 truncate_size,
-			struct page **pages, int num_pages)
+			struct page **pages, int num_pages, int page_align)
 {
 	struct ceph_osd_request *req;
 	int rc = 0;
@@ -1499,15 +1505,15 @@ int ceph_osdc_readpages(struct ceph_osd_client *osdc,
 	req = ceph_osdc_new_request(osdc, layout, vino, off, plen,
 				    CEPH_OSD_OP_READ, CEPH_OSD_FLAG_READ,
 				    NULL, 0, truncate_seq, truncate_size, NULL,
-				    false, 1);
+				    false, 1, page_align);
 	if (!req)
 		return -ENOMEM;
 
 	/* it may be a short read due to an object boundary */
 	req->r_pages = pages;
 
-	dout("readpages  final extent is %llu~%llu (%d pages)\n",
-	     off, *plen, req->r_num_pages);
+	dout("readpages  final extent is %llu~%llu (%d pages align %d)\n",
+	     off, *plen, req->r_num_pages, page_align);
 
 	rc = ceph_osdc_start_request(osdc, req, false);
 	if (!rc)
@@ -1533,6 +1539,7 @@ int ceph_osdc_writepages(struct ceph_osd_client *osdc, struct ceph_vino vino,
 {
 	struct ceph_osd_request *req;
 	int rc = 0;
+	int page_align = off & ~PAGE_MASK;
 
 	BUG_ON(vino.snap != CEPH_NOSNAP);
 	req = ceph_osdc_new_request(osdc, layout, vino, off, &len,
@@ -1541,7 +1548,7 @@ int ceph_osdc_writepages(struct ceph_osd_client *osdc, struct ceph_vino vino,
 					    CEPH_OSD_FLAG_WRITE,
 				    snapc, do_sync,
 				    truncate_seq, truncate_size, mtime,
-				    nofail, 1);
+				    nofail, 1, page_align);
 	if (!req)
 		return -ENOMEM;
 
@@ -1638,8 +1645,7 @@ static struct ceph_msg *get_reply(struct ceph_connection *con,
 	m = ceph_msg_get(req->r_reply);
 
 	if (data_len > 0) {
-		unsigned data_off = le16_to_cpu(hdr->data_off);
-		int want = calc_pages_for(data_off & ~PAGE_MASK, data_len);
+		int want = calc_pages_for(req->r_page_alignment, data_len);
 
 		if (unlikely(req->r_num_pages < want)) {
 			pr_warning("tid %lld reply %d > expected %d pages\n",

From c5c6b19d4b8f5431fca05f28ae9e141045022149 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Tue, 9 Nov 2010 12:40:00 -0800
Subject: [PATCH 0327/1066] ceph: explicitly specify page alignment in network
 messages

The alignment used for reading data into or out of pages used to be taken
from the data_off field in the message header.  This only worked as long
as the page alignment matched the object offset, breaking direct io to
non-page aligned offsets.

Instead, explicitly specify the page alignment next to the page vector
in the ceph_msg struct, and use that instead of the message header (which
probably shouldn't be trusted).  The alloc_msg callback is responsible for
filling in this field properly when it sets up the page vector.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 include/linux/ceph/messenger.h |  1 +
 net/ceph/messenger.c           | 10 +++++-----
 net/ceph/osd_client.c          |  3 +++
 3 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h
index 5956d62c3057..a108b425fee2 100644
--- a/include/linux/ceph/messenger.h
+++ b/include/linux/ceph/messenger.h
@@ -82,6 +82,7 @@ struct ceph_msg {
 	struct ceph_buffer *middle;
 	struct page **pages;            /* data payload.  NOT OWNER. */
 	unsigned nr_pages;              /* size of page array */
+	unsigned page_alignment;        /* io offset in first page */
 	struct ceph_pagelist *pagelist; /* instead of pages */
 	struct list_head list_head;
 	struct kref kref;
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index d379abf873bc..1c7a2ec4f3cc 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -540,8 +540,7 @@ static void prepare_write_message(struct ceph_connection *con)
 		/* initialize page iterator */
 		con->out_msg_pos.page = 0;
 		if (m->pages)
-			con->out_msg_pos.page_pos =
-				le16_to_cpu(m->hdr.data_off) & ~PAGE_MASK;
+			con->out_msg_pos.page_pos = m->page_alignment;
 		else
 			con->out_msg_pos.page_pos = 0;
 		con->out_msg_pos.data_pos = 0;
@@ -1491,7 +1490,7 @@ static int read_partial_message(struct ceph_connection *con)
 	struct ceph_msg *m = con->in_msg;
 	int ret;
 	int to, left;
-	unsigned front_len, middle_len, data_len, data_off;
+	unsigned front_len, middle_len, data_len;
 	int datacrc = con->msgr->nocrc;
 	int skip;
 	u64 seq;
@@ -1527,7 +1526,6 @@ static int read_partial_message(struct ceph_connection *con)
 	data_len = le32_to_cpu(con->in_hdr.data_len);
 	if (data_len > CEPH_MSG_MAX_DATA_LEN)
 		return -EIO;
-	data_off = le16_to_cpu(con->in_hdr.data_off);
 
 	/* verify seq# */
 	seq = le64_to_cpu(con->in_hdr.seq);
@@ -1575,7 +1573,7 @@ static int read_partial_message(struct ceph_connection *con)
 
 		con->in_msg_pos.page = 0;
 		if (m->pages)
-			con->in_msg_pos.page_pos = data_off & ~PAGE_MASK;
+			con->in_msg_pos.page_pos = m->page_alignment;
 		else
 			con->in_msg_pos.page_pos = 0;
 		con->in_msg_pos.data_pos = 0;
@@ -2300,6 +2298,7 @@ struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags)
 
 	/* data */
 	m->nr_pages = 0;
+	m->page_alignment = 0;
 	m->pages = NULL;
 	m->pagelist = NULL;
 	m->bio = NULL;
@@ -2369,6 +2368,7 @@ static struct ceph_msg *ceph_alloc_msg(struct ceph_connection *con,
 			       type, front_len);
 			return NULL;
 		}
+		msg->page_alignment = le16_to_cpu(hdr->data_off);
 	}
 	memcpy(&msg->hdr, &con->in_hdr, sizeof(con->in_hdr));
 
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 6c096239660c..3e20a122ffa2 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -391,6 +391,8 @@ void ceph_osdc_build_request(struct ceph_osd_request *req,
 		req->r_request->hdr.data_len = cpu_to_le32(data_len);
 	}
 
+	req->r_request->page_alignment = req->r_page_alignment;
+
 	BUG_ON(p > msg->front.iov_base + msg->front.iov_len);
 	msg_size = p - msg->front.iov_base;
 	msg->front.iov_len = msg_size;
@@ -1657,6 +1659,7 @@ static struct ceph_msg *get_reply(struct ceph_connection *con,
 		}
 		m->pages = req->r_pages;
 		m->nr_pages = req->r_num_pages;
+		m->page_alignment = req->r_page_alignment;
 #ifdef CONFIG_BLOCK
 		m->bio = req->r_bio;
 #endif

From c888d4e7b2644c7ff17098b0b521c29b98e0abd0 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segooon@gmail.com>
Date: Sun, 10 Oct 2010 21:28:39 +0400
Subject: [PATCH 0328/1066] staging: cpia: fix camera file owner in cpia_open()

Use effective UID instead of real UID for camera owner.
There is no need to check for pending signals just before successfull
return.  Exit in case of pending signal also leaved camera in open state.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/cpia/cpia.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/staging/cpia/cpia.c b/drivers/staging/cpia/cpia.c
index 933ae4c8cb9a..0e740b8dafc3 100644
--- a/drivers/staging/cpia/cpia.c
+++ b/drivers/staging/cpia/cpia.c
@@ -3184,13 +3184,9 @@ static int cpia_open(struct file *file)
 		goto oops;
 	}
 
-	err = -EINTR;
-	if(signal_pending(current))
-		goto oops;
-
 	/* Set ownership of /proc/cpia/videoX to current user */
 	if(cam->proc_entry)
-		cam->proc_entry->uid = current_uid();
+		cam->proc_entry->uid = current_euid();
 
 	/* set mark for loading first frame uncompressed */
 	cam->first_frame = 1;

From ea07a9f2557b8ea99a0cdd778a5d94a7495bb049 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segooon@gmail.com>
Date: Sun, 10 Oct 2010 21:28:51 +0400
Subject: [PATCH 0329/1066] staging: stradis: fix error handling and
 information leak to userland

configure_saa7146() didn't free irq on error.
saa_open() didn't decrease reference count of saa on error.
saa_ioctl() leaked information from the kernel stack to userland as it
didn't fill copied structs with zeros.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/stradis/stradis.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/stradis/stradis.c b/drivers/staging/stradis/stradis.c
index a057824e7ebc..807dd7eb748f 100644
--- a/drivers/staging/stradis/stradis.c
+++ b/drivers/staging/stradis/stradis.c
@@ -1286,6 +1286,7 @@ static long saa_ioctl(struct file *file,
 	case VIDIOCGCAP:
 		{
 			struct video_capability b;
+			memset(&b, 0, sizeof(b));
 			strcpy(b.name, saa->video_dev.name);
 			b.type = VID_TYPE_CAPTURE | VID_TYPE_OVERLAY |
 				VID_TYPE_CLIPPING | VID_TYPE_FRAMERAM |
@@ -1416,6 +1417,7 @@ static long saa_ioctl(struct file *file,
 	case VIDIOCGWIN:
 		{
 			struct video_window vw;
+			memset(&vw, 0, sizeof(vw));
 			vw.x = saa->win.x;
 			vw.y = saa->win.y;
 			vw.width = saa->win.width;
@@ -1448,6 +1450,7 @@ static long saa_ioctl(struct file *file,
 	case VIDIOCGFBUF:
 		{
 			struct video_buffer v;
+			memset(&v, 0, sizeof(v));
 			v.base = (void *)saa->win.vidadr;
 			v.height = saa->win.sheight;
 			v.width = saa->win.swidth;
@@ -1492,6 +1495,7 @@ static long saa_ioctl(struct file *file,
 	case VIDIOCGAUDIO:
 		{
 			struct video_audio v;
+			memset(&v, 0, sizeof(v));
 			v = saa->audio_dev;
 			v.flags &= ~(VIDEO_AUDIO_MUTE | VIDEO_AUDIO_MUTABLE);
 			v.flags |= VIDEO_AUDIO_MUTABLE | VIDEO_AUDIO_VOLUME;
@@ -1534,6 +1538,7 @@ static long saa_ioctl(struct file *file,
 	case VIDIOCGUNIT:
 		{
 			struct video_unit vu;
+			memset(&vu, 0, sizeof(vu));
 			vu.video = saa->video_dev.minor;
 			vu.vbi = VIDEO_NO_UNIT;
 			vu.radio = VIDEO_NO_UNIT;
@@ -1888,6 +1893,7 @@ static int saa_open(struct file *file)
 
 	saa->user++;
 	if (saa->user > 1) {
+		saa->user--;
 		unlock_kernel();
 		return 0;	/* device open already, don't reset */
 	}
@@ -2000,10 +2006,13 @@ static int __devinit configure_saa7146(struct pci_dev *pdev, int num)
 	if (retval < 0) {
 		dev_err(&pdev->dev, "%d: error in registering video device!\n",
 			num);
-		goto errio;
+		goto errirq;
 	}
 
 	return 0;
+
+errirq:
+	free_irq(saa->irq, saa);
 errio:
 	iounmap(saa->saa7146_mem);
 err:

From 3b97eed201376db6c4487fc846022eb4ffa7e1f9 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Tue, 19 Oct 2010 07:56:24 +0200
Subject: [PATCH 0330/1066] Staging: sst: dereferencing user pointers

This code dereferences user supplied pointers directly instead of doing
a copy_from_user().  Some kernel configs put user and kernel memory in
different address spaces so this code isn't portable.  Also the user
memory could be swapped out or in this case the pointer could just be
NULL leading to an oops.

Another thing is that it makes permission tests like this sort of
meaningless.
	if (minor == STREAM_MODULE && rec_mute->stream_id == 0) {
		retval = -EPERM;
		break;
	}
The user could set stream_id to 1 for the test and then change it later.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 .../intel_sst/intel_sst_app_interface.c       | 79 +++++++++----------
 1 file changed, 36 insertions(+), 43 deletions(-)

diff --git a/drivers/staging/intel_sst/intel_sst_app_interface.c b/drivers/staging/intel_sst/intel_sst_app_interface.c
index 463e5cba8307..a0d13ee190e5 100644
--- a/drivers/staging/intel_sst/intel_sst_app_interface.c
+++ b/drivers/staging/intel_sst/intel_sst_app_interface.c
@@ -885,41 +885,39 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 		break;
 	}
 	case _IOC_NR(SNDRV_SST_SET_VOL): {
-		struct snd_sst_vol *set_vol;
-		struct snd_sst_vol *rec_vol = (struct snd_sst_vol *)arg;
-		pr_debug("sst: SET_VOLUME recieved for %d!\n",
-				rec_vol->stream_id);
-		if (minor == STREAM_MODULE && rec_vol->stream_id == 0) {
-			pr_debug("sst: invalid operation!\n");
-			retval = -EPERM;
-			break;
-		}
-		set_vol = kzalloc(sizeof(*set_vol), GFP_ATOMIC);
-		if (!set_vol) {
-			pr_debug("sst: mem allocation failed\n");
-			retval = -ENOMEM;
-			break;
-		}
-		if (copy_from_user(set_vol, rec_vol, sizeof(*set_vol))) {
+		struct snd_sst_vol set_vol;
+
+		if (copy_from_user(&set_vol, (void __user *)arg,
+				sizeof(set_vol))) {
 			pr_debug("sst: copy failed\n");
 			retval = -EFAULT;
 			break;
 		}
-		retval = sst_set_vol(set_vol);
-		kfree(set_vol);
-		break;
-	}
-	case _IOC_NR(SNDRV_SST_GET_VOL): {
-		struct snd_sst_vol *rec_vol = (struct snd_sst_vol *)arg;
-		struct snd_sst_vol get_vol;
-		pr_debug("sst: IOCTL_GET_VOLUME recieved for stream = %d!\n",
-				rec_vol->stream_id);
-		if (minor == STREAM_MODULE && rec_vol->stream_id == 0) {
+		pr_debug("sst: SET_VOLUME recieved for %d!\n",
+				set_vol.stream_id);
+		if (minor == STREAM_MODULE && set_vol.stream_id == 0) {
+			pr_debug("sst: invalid operation!\n");
+			retval = -EPERM;
+			break;
+		}
+		retval = sst_set_vol(&set_vol);
+		break;
+	}
+	case _IOC_NR(SNDRV_SST_GET_VOL): {
+		struct snd_sst_vol get_vol;
+
+		if (copy_from_user(&get_vol, (void __user *)arg,
+				sizeof(get_vol))) {
+			retval = -EFAULT;
+			break;
+		}
+		pr_debug("sst: IOCTL_GET_VOLUME recieved for stream = %d!\n",
+				get_vol.stream_id);
+		if (minor == STREAM_MODULE && get_vol.stream_id == 0) {
 			pr_debug("sst: invalid operation!\n");
 			retval = -EPERM;
 			break;
 		}
-		get_vol.stream_id = rec_vol->stream_id;
 		retval = sst_get_vol(&get_vol);
 		if (retval) {
 			retval = -EIO;
@@ -938,25 +936,20 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 	}
 
 	case _IOC_NR(SNDRV_SST_MUTE): {
-		struct snd_sst_mute *set_mute;
-		struct snd_sst_vol *rec_mute = (struct snd_sst_vol *)arg;
-		pr_debug("sst: SNDRV_SST_SET_VOLUME recieved for %d!\n",
-			rec_mute->stream_id);
-		if (minor == STREAM_MODULE && rec_mute->stream_id == 0) {
-			retval = -EPERM;
-			break;
-		}
-		set_mute = kzalloc(sizeof(*set_mute), GFP_ATOMIC);
-		if (!set_mute) {
-			retval = -ENOMEM;
-			break;
-		}
-		if (copy_from_user(set_mute, rec_mute, sizeof(*set_mute))) {
+		struct snd_sst_mute set_mute;
+
+		if (copy_from_user(&set_mute, (void __user *)arg,
+				sizeof(set_mute))) {
 			retval = -EFAULT;
 			break;
 		}
-		retval = sst_set_mute(set_mute);
-		kfree(set_mute);
+		pr_debug("sst: SNDRV_SST_SET_VOLUME recieved for %d!\n",
+			set_mute.stream_id);
+		if (minor == STREAM_MODULE && set_mute.stream_id == 0) {
+			retval = -EPERM;
+			break;
+		}
+		retval = sst_set_mute(&set_mute);
 		break;
 	}
 	case _IOC_NR(SNDRV_SST_STREAM_GET_PARAMS): {

From bc704e31edc723a84c2469f26aa0279e1ddb948e Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Tue, 19 Oct 2010 07:57:04 +0200
Subject: [PATCH 0331/1066] Staging: sst: more dereferencing user pointers

This is another patch about making a copy of the data into kernel space
before using it.  It is easy to trigger a kernel oops in the original
code.  If you passed a NULL to SNDRV_SST_SET_TARGET_DEVICE then it
called BUG_ON().  And SNDRV_SST_DRIVER_INFO would let you write the
information to arbitrary memory locations which is a security violation.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 .../intel_sst/intel_sst_app_interface.c       | 75 ++++++++++++-------
 1 file changed, 46 insertions(+), 29 deletions(-)

diff --git a/drivers/staging/intel_sst/intel_sst_app_interface.c b/drivers/staging/intel_sst/intel_sst_app_interface.c
index a0d13ee190e5..8390aa793b7b 100644
--- a/drivers/staging/intel_sst/intel_sst_app_interface.c
+++ b/drivers/staging/intel_sst/intel_sst_app_interface.c
@@ -838,7 +838,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 		break;
 
 	case _IOC_NR(SNDRV_SST_STREAM_SET_PARAMS): {
-		struct snd_sst_params *str_param = (struct snd_sst_params *)arg;
+		struct snd_sst_params str_param;
 
 		pr_debug("sst: IOCTL_SET_PARAMS recieved!\n");
 		if (minor != STREAM_MODULE) {
@@ -846,17 +846,25 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 			break;
 		}
 
+		if (copy_from_user(&str_param, (void __user *)arg,
+				sizeof(str_param))) {
+			retval = -EFAULT;
+			break;
+		}
+
 		if (!str_id) {
 
-			retval = sst_get_stream(str_param);
+			retval = sst_get_stream(&str_param);
 			if (retval > 0) {
 				struct stream_info *str_info;
+				char __user *dest;
+
 				sst_drv_ctx->stream_cnt++;
 				data->str_id = retval;
 				str_info = &sst_drv_ctx->streams[retval];
 				str_info->src = SST_DRV;
-				retval = copy_to_user(&str_param->stream_id,
-						&retval, sizeof(__u32));
+				dest = (char *)arg + offsetof(struct snd_sst_params, stream_id);
+				retval = copy_to_user(dest, &retval, sizeof(__u32));
 				if (retval)
 					retval = -EFAULT;
 			} else {
@@ -866,16 +874,14 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 		} else {
 			pr_debug("sst: SET_STREAM_PARAMS recieved!\n");
 			/* allocated set params only */
-			retval = sst_set_stream_param(str_id, str_param);
+			retval = sst_set_stream_param(str_id, &str_param);
 			/* Block the call for reply */
 			if (!retval) {
 				int sfreq = 0, word_size = 0, num_channel = 0;
-				sfreq =	str_param->sparams.uc.pcm_params.sfreq;
-				word_size = str_param->sparams.
-						uc.pcm_params.pcm_wd_sz;
-				num_channel = str_param->
-					sparams.uc.pcm_params.num_chan;
-				if (str_param->ops == STREAM_OPS_CAPTURE) {
+				sfreq =	str_param.sparams.uc.pcm_params.sfreq;
+				word_size = str_param.sparams.uc.pcm_params.pcm_wd_sz;
+				num_channel = str_param.sparams.uc.pcm_params.num_chan;
+				if (str_param.ops == STREAM_OPS_CAPTURE) {
 					sst_drv_ctx->scard_ops->\
 					set_pcm_audio_params(sfreq,
 						word_size, num_channel);
@@ -976,16 +982,22 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 	}
 
 	case _IOC_NR(SNDRV_SST_MMAP_PLAY):
-	case _IOC_NR(SNDRV_SST_MMAP_CAPTURE):
+	case _IOC_NR(SNDRV_SST_MMAP_CAPTURE): {
+		struct snd_sst_mmap_buffs mmap_buf;
+
 		pr_debug("sst: SNDRV_SST_MMAP_PLAY/CAPTURE recieved!\n");
 		if (minor != STREAM_MODULE) {
 			retval = -EBADRQC;
 			break;
 		}
-		retval = intel_sst_mmap_play_capture(str_id,
-				(struct snd_sst_mmap_buffs *)arg);
+		if (copy_from_user(&mmap_buf, (void __user *)arg,
+				sizeof(mmap_buf))) {
+			retval = -EFAULT;
+			break;
+		}
+		retval = intel_sst_mmap_play_capture(str_id, &mmap_buf);
 		break;
-
+	}
 	case _IOC_NR(SNDRV_SST_STREAM_DROP):
 		pr_debug("sst: SNDRV_SST_IOCTL_DROP recieved!\n");
 		if (minor != STREAM_MODULE) {
@@ -996,7 +1008,6 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 		break;
 
 	case _IOC_NR(SNDRV_SST_STREAM_GET_TSTAMP): {
-		unsigned long long *ms = (unsigned long long *)arg;
 		struct snd_sst_tstamp tstamp = {0};
 		unsigned long long time, freq, mod;
 
@@ -1013,7 +1024,8 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 		freq = (unsigned long long) tstamp.sampling_frequency;
 		time = time * 1000; /* converting it to ms */
 		mod = do_div(time, freq);
-		if (copy_to_user(ms, &time, sizeof(*ms)))
+		if (copy_to_user((void __user *)arg, &time,
+				sizeof(unsigned long long)))
 			retval = -EFAULT;
 		break;
 	}
@@ -1058,32 +1070,37 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 	}
 
 	case _IOC_NR(SNDRV_SST_SET_TARGET_DEVICE): {
-		struct snd_sst_target_device *target_device;
+		struct snd_sst_target_device target_device;
 
 		pr_debug("sst: SET_TARGET_DEVICE recieved!\n");
-		target_device =	(struct snd_sst_target_device *)arg;
-		BUG_ON(!target_device);
+		if (copy_from_user(&target_device, (void __user *)arg,
+				sizeof(target_device))) {
+			retval = -EFAULT;
+			break;
+		}
 		if (minor != AM_MODULE) {
 			retval = -EBADRQC;
 			break;
 		}
-		retval = sst_target_device_select(target_device);
+		retval = sst_target_device_select(&target_device);
 		break;
 	}
 
 	case _IOC_NR(SNDRV_SST_DRIVER_INFO): {
-		struct snd_sst_driver_info *info =
-			(struct snd_sst_driver_info *)arg;
+		struct snd_sst_driver_info info;
 
 		pr_debug("sst: SNDRV_SST_DRIVER_INFO recived\n");
-		info->version = SST_VERSION_NUM;
+		info.version = SST_VERSION_NUM;
 		/* hard coding, shud get sumhow later */
-		info->active_pcm_streams = sst_drv_ctx->stream_cnt -
+		info.active_pcm_streams = sst_drv_ctx->stream_cnt -
 						sst_drv_ctx->encoded_cnt;
-		info->active_enc_streams = sst_drv_ctx->encoded_cnt;
-		info->max_pcm_streams = MAX_ACTIVE_STREAM - MAX_ENC_STREAM;
-		info->max_enc_streams = MAX_ENC_STREAM;
-		info->buf_per_stream = sst_drv_ctx->mmap_len;
+		info.active_enc_streams = sst_drv_ctx->encoded_cnt;
+		info.max_pcm_streams = MAX_ACTIVE_STREAM - MAX_ENC_STREAM;
+		info.max_enc_streams = MAX_ENC_STREAM;
+		info.buf_per_stream = sst_drv_ctx->mmap_len;
+		if (copy_to_user((void __user *)arg, &info,
+				sizeof(info)))
+			retval = -EFAULT;
 		break;
 	}
 

From e9f25689a86570c30d3f101b1f9834a579bed2e5 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Tue, 19 Oct 2010 07:57:48 +0200
Subject: [PATCH 0332/1066] Staging: sst: fixups in SNDRV_SST_STREAM_DECODE

This is another patch about copying data to the kernel before using it.

SNDRV_SST_STREAM_DECODE is sort of tricky because we need to do a
copy_from_user() that gives us another two pointers and we have copy
those.  Those again give us some more pointers that we have to copy.

Besides those problems, the code had a stack overflow:
-	struct snd_sst_buff_entry ibuf_temp[param->ibufs->entries],
-		obuf_temp[param->obufs->entries];
param->ibufs->entries comes from the user.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 .../intel_sst/intel_sst_app_interface.c       | 91 ++++++++++++-------
 1 file changed, 56 insertions(+), 35 deletions(-)

diff --git a/drivers/staging/intel_sst/intel_sst_app_interface.c b/drivers/staging/intel_sst/intel_sst_app_interface.c
index 8390aa793b7b..d20724d3b68d 100644
--- a/drivers/staging/intel_sst/intel_sst_app_interface.c
+++ b/drivers/staging/intel_sst/intel_sst_app_interface.c
@@ -1105,62 +1105,83 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 	}
 
 	case _IOC_NR(SNDRV_SST_STREAM_DECODE): {
-		struct snd_sst_dbufs *param =
-				(struct snd_sst_dbufs *)arg, dbufs_local;
-		int i;
+		struct snd_sst_dbufs param;
+		struct snd_sst_dbufs dbufs_local;
 		struct snd_sst_buffs ibufs, obufs;
-		struct snd_sst_buff_entry ibuf_temp[param->ibufs->entries],
-				obuf_temp[param->obufs->entries];
+		struct snd_sst_buff_entry *ibuf_tmp, *obuf_tmp;
+		char __user *dest;
 
 		pr_debug("sst: SNDRV_SST_STREAM_DECODE recived\n");
 		if (minor != STREAM_MODULE) {
 			retval = -EBADRQC;
 			break;
 		}
-		if (!param) {
-			retval = -EINVAL;
+		if (copy_from_user(&param, (void __user *)arg,
+				sizeof(param))) {
+			retval = -EFAULT;
 			break;
 		}
 
-		dbufs_local.input_bytes_consumed = param->input_bytes_consumed;
+		dbufs_local.input_bytes_consumed = param.input_bytes_consumed;
 		dbufs_local.output_bytes_produced =
-					param->output_bytes_produced;
-		dbufs_local.ibufs = &ibufs;
-		dbufs_local.obufs = &obufs;
-		dbufs_local.ibufs->entries = param->ibufs->entries;
-		dbufs_local.ibufs->type = param->ibufs->type;
-		dbufs_local.obufs->entries = param->obufs->entries;
-		dbufs_local.obufs->type = param->obufs->type;
+					param.output_bytes_produced;
 
-		dbufs_local.ibufs->buff_entry = ibuf_temp;
-		for (i = 0; i < dbufs_local.ibufs->entries; i++) {
-			ibuf_temp[i].buffer =
-				param->ibufs->buff_entry[i].buffer;
-			ibuf_temp[i].size =
-				param->ibufs->buff_entry[i].size;
+		if (copy_from_user(&ibufs, param.ibufs, sizeof(ibufs))) {
+			retval = -EFAULT;
+			break;
 		}
-		dbufs_local.obufs->buff_entry = obuf_temp;
-		for (i = 0; i < dbufs_local.obufs->entries; i++) {
-			obuf_temp[i].buffer =
-				param->obufs->buff_entry[i].buffer;
-			obuf_temp[i].size =
-				param->obufs->buff_entry[i].size;
+		if (copy_from_user(&obufs, param.obufs, sizeof(obufs))) {
+			retval = -EFAULT;
+			break;
 		}
+
+		ibuf_tmp = kcalloc(ibufs.entries, sizeof(*ibuf_tmp), GFP_KERNEL);
+		obuf_tmp = kcalloc(obufs.entries, sizeof(*obuf_tmp), GFP_KERNEL);
+		if (!ibuf_tmp || !obuf_tmp) {
+			retval = -ENOMEM;
+			goto free_iobufs;
+		}
+
+		if (copy_from_user(ibuf_tmp, ibufs.buff_entry,
+				ibufs.entries * sizeof(*ibuf_tmp))) {
+			retval = -EFAULT;
+			goto free_iobufs;
+		}
+		ibufs.buff_entry = ibuf_tmp;
+		dbufs_local.ibufs = &ibufs;
+
+		if (copy_from_user(obuf_tmp, obufs.buff_entry,
+				obufs.entries * sizeof(*obuf_tmp))) {
+			retval = -EFAULT;
+			goto free_iobufs;
+		}
+		obufs.buff_entry = obuf_tmp;
+		dbufs_local.obufs = &obufs;
+
 		retval = sst_decode(str_id, &dbufs_local);
-		if (retval)
-			retval =  -EAGAIN;
-		if (copy_to_user(&param->input_bytes_consumed,
+		if (retval) {
+			retval = -EAGAIN;
+			goto free_iobufs;
+		}
+
+		dest = (char *)arg + offsetof(struct snd_sst_dbufs, input_bytes_consumed);
+		if (copy_to_user(dest,
 				&dbufs_local.input_bytes_consumed,
 				sizeof(unsigned long long))) {
-			retval =  -EFAULT;
-			break;
+			retval = -EFAULT;
+			goto free_iobufs;
 		}
-		if (copy_to_user(&param->output_bytes_produced,
+
+		dest = (char *)arg + offsetof(struct snd_sst_dbufs, input_bytes_consumed);
+		if (copy_to_user(dest,
 				&dbufs_local.output_bytes_produced,
 				sizeof(unsigned long long))) {
-			retval =  -EFAULT;
-			break;
+			retval = -EFAULT;
+			goto free_iobufs;
 		}
+free_iobufs:
+		kfree(ibuf_tmp);
+		kfree(obuf_tmp);
 		break;
 	}
 

From 08da782b1a58fd63199928176909e103477c933a Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Wed, 20 Oct 2010 08:57:34 +0200
Subject: [PATCH 0333/1066] Staging: sst: user pointers in
 intel_sst_mmap_play_capture()

There were some places in intel_sst_mmap_play_capture() that
dereferenced user pointers instead of copying the data to the kernel.

I removed the BUG_ON(!mmap_buf) and BUG_ON(!buf_entry) since those are
never possible in the current code.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 .../intel_sst/intel_sst_app_interface.c       | 29 ++++++++++++++-----
 1 file changed, 22 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/intel_sst/intel_sst_app_interface.c b/drivers/staging/intel_sst/intel_sst_app_interface.c
index d20724d3b68d..834bb617524b 100644
--- a/drivers/staging/intel_sst/intel_sst_app_interface.c
+++ b/drivers/staging/intel_sst/intel_sst_app_interface.c
@@ -244,12 +244,12 @@ static int intel_sst_mmap_play_capture(u32 str_id,
 	int retval, i;
 	struct stream_info *stream;
 	struct snd_sst_mmap_buff_entry *buf_entry;
+	struct snd_sst_mmap_buff_entry *tmp_buf;
 
 	pr_debug("sst:called for str_id %d\n", str_id);
 	retval = sst_validate_strid(str_id);
 	if (retval)
 		return -EINVAL;
-	BUG_ON(!mmap_buf);
 
 	stream = &sst_drv_ctx->streams[str_id];
 	if (stream->mmapped != true)
@@ -262,14 +262,24 @@ static int intel_sst_mmap_play_capture(u32 str_id,
 	stream->curr_bytes = 0;
 	stream->cumm_bytes = 0;
 
+	tmp_buf = kcalloc(mmap_buf->entries, sizeof(*tmp_buf), GFP_KERNEL);
+	if (!tmp_buf)
+		return -ENOMEM;
+	if (copy_from_user(tmp_buf, (void __user *)mmap_buf->buff,
+			mmap_buf->entries * sizeof(*tmp_buf))) {
+		retval = -EFAULT;
+		goto out_free;
+	}
+
 	pr_debug("sst:new buffers count %d status %d\n",
 			mmap_buf->entries, stream->status);
-	buf_entry = mmap_buf->buff;
+	buf_entry = tmp_buf;
 	for (i = 0; i < mmap_buf->entries; i++) {
-		BUG_ON(!buf_entry);
 		bufs = kzalloc(sizeof(*bufs), GFP_KERNEL);
-		if (!bufs)
-			return -ENOMEM;
+		if (!bufs) {
+			retval = -ENOMEM;
+			goto out_free;
+		}
 		bufs->size = buf_entry->size;
 		bufs->offset = buf_entry->offset;
 		bufs->addr = sst_drv_ctx->mmap_mem;
@@ -293,13 +303,15 @@ static int intel_sst_mmap_play_capture(u32 str_id,
 			if (sst_play_frame(str_id) < 0) {
 				pr_warn("sst: play frames fail\n");
 				mutex_unlock(&stream->lock);
-				return -EIO;
+				retval = -EIO;
+				goto out_free;
 			}
 		} else if (stream->ops == STREAM_OPS_CAPTURE) {
 			if (sst_capture_frame(str_id) < 0) {
 				pr_warn("sst: capture frame fail\n");
 				mutex_unlock(&stream->lock);
-				return -EIO;
+				retval = -EIO;
+				goto out_free;
 			}
 		}
 	}
@@ -314,6 +326,9 @@ static int intel_sst_mmap_play_capture(u32 str_id,
 	if (retval >= 0)
 		retval = stream->cumm_bytes;
 	pr_debug("sst:end of play/rec ioctl bytes = %d!!\n", retval);
+
+out_free:
+	kfree(tmp_buf);
 	return retval;
 }
 

From 4fc718a4b0cdf3803f370e323ea5252a3d76f52d Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Wed, 20 Oct 2010 08:58:30 +0200
Subject: [PATCH 0334/1066] Staging: sst: add some __user anotations

This silences all the sparse warnings in intel_sst_app_interface.c.
It was just a matter of adding __user annotations, I didn't find any
real bugs here.  Quite a few of these were needed for stuff I added
earlier, sorry about that.

I removed a couple casts to (void *) that caused a warning like:
	drivers/staging/intel_sst/intel_sst_app_interface.c:606:27:
		warning: cast removes address space of expression
For example sst_drv_ctx->mailbox is already declared as
"void __iomem *mailbox" so casting it to void pointer isn't necessary
and it makes sparse complain because it removes the __user attribute.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 .../intel_sst/intel_sst_app_interface.c       | 36 +++++++++----------
 drivers/staging/intel_sst/intel_sst_common.h  |  4 +--
 2 files changed, 18 insertions(+), 22 deletions(-)

diff --git a/drivers/staging/intel_sst/intel_sst_app_interface.c b/drivers/staging/intel_sst/intel_sst_app_interface.c
index 834bb617524b..9618c7997461 100644
--- a/drivers/staging/intel_sst/intel_sst_app_interface.c
+++ b/drivers/staging/intel_sst/intel_sst_app_interface.c
@@ -392,7 +392,7 @@ static int snd_sst_fill_kernel_list(struct stream_info *stream,
 {
 	struct sst_stream_bufs *stream_bufs;
 	unsigned long index, mmap_len;
-	unsigned char *bufp;
+	unsigned char __user *bufp;
 	unsigned long size, copied_size;
 	int retval = 0, add_to_list = 0;
 	static int sent_offset;
@@ -527,9 +527,7 @@ static int snd_sst_copy_userbuf_capture(struct stream_info *stream,
 			/* copy to user */
 			list_for_each_entry_safe(entry, _entry,
 						copy_to_list, node) {
-				if (copy_to_user((void *)
-					     iovec[entry->iov_index].iov_base +
-					     entry->iov_offset,
+				if (copy_to_user(iovec[entry->iov_index].iov_base + entry->iov_offset,
 					     kbufs->addr + entry->offset,
 					     entry->size)) {
 					/* Clean up the list and return error */
@@ -605,7 +603,7 @@ static int intel_sst_read_write(unsigned int str_id, char __user *buf,
 			buf, (int) count, (int) stream->status);
 
 	stream->buf_type = SST_BUF_USER_STATIC;
-	iovec.iov_base = (void *)buf;
+	iovec.iov_base = buf;
 	iovec.iov_len  = count;
 	nr_segs = 1;
 
@@ -878,7 +876,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 				data->str_id = retval;
 				str_info = &sst_drv_ctx->streams[retval];
 				str_info->src = SST_DRV;
-				dest = (char *)arg + offsetof(struct snd_sst_params, stream_id);
+				dest = (char __user *)arg + offsetof(struct snd_sst_params, stream_id);
 				retval = copy_to_user(dest, &retval, sizeof(__u32));
 				if (retval)
 					retval = -EFAULT;
@@ -947,7 +945,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 		pr_debug("sst: id:%d\n, vol:%d, ramp_dur:%d, ramp_type:%d\n",
 				get_vol.stream_id, get_vol.volume,
 				get_vol.ramp_duration, get_vol.ramp_type);
-		if (copy_to_user((struct snd_sst_vol *)arg,
+		if (copy_to_user((struct snd_sst_vol __user *)arg,
 				&get_vol, sizeof(get_vol))) {
 			retval = -EFAULT;
 			break;
@@ -987,7 +985,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 			retval = -EIO;
 			break;
 		}
-		if (copy_to_user((struct snd_sst_get_stream_params *)arg,
+		if (copy_to_user((struct snd_sst_get_stream_params __user *)arg,
 					&get_params, sizeof(get_params))) {
 			retval = -EFAULT;
 			break;
@@ -1032,8 +1030,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 			break;
 		}
 		memcpy_fromio(&tstamp,
-			((void *)(sst_drv_ctx->mailbox + SST_TIME_STAMP)
-			+(str_id * sizeof(tstamp))),
+			sst_drv_ctx->mailbox + SST_TIME_STAMP + str_id * sizeof(tstamp),
 			sizeof(tstamp));
 		time = tstamp.samples_rendered;
 		freq = (unsigned long long) tstamp.sampling_frequency;
@@ -1141,11 +1138,11 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 		dbufs_local.output_bytes_produced =
 					param.output_bytes_produced;
 
-		if (copy_from_user(&ibufs, param.ibufs, sizeof(ibufs))) {
+		if (copy_from_user(&ibufs, (void __user *)param.ibufs, sizeof(ibufs))) {
 			retval = -EFAULT;
 			break;
 		}
-		if (copy_from_user(&obufs, param.obufs, sizeof(obufs))) {
+		if (copy_from_user(&obufs, (void __user *)param.obufs, sizeof(obufs))) {
 			retval = -EFAULT;
 			break;
 		}
@@ -1157,7 +1154,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 			goto free_iobufs;
 		}
 
-		if (copy_from_user(ibuf_tmp, ibufs.buff_entry,
+		if (copy_from_user(ibuf_tmp, (void __user *)ibufs.buff_entry,
 				ibufs.entries * sizeof(*ibuf_tmp))) {
 			retval = -EFAULT;
 			goto free_iobufs;
@@ -1165,7 +1162,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 		ibufs.buff_entry = ibuf_tmp;
 		dbufs_local.ibufs = &ibufs;
 
-		if (copy_from_user(obuf_tmp, obufs.buff_entry,
+		if (copy_from_user(obuf_tmp, (void __user *)obufs.buff_entry,
 				obufs.entries * sizeof(*obuf_tmp))) {
 			retval = -EFAULT;
 			goto free_iobufs;
@@ -1179,7 +1176,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 			goto free_iobufs;
 		}
 
-		dest = (char *)arg + offsetof(struct snd_sst_dbufs, input_bytes_consumed);
+		dest = (char __user *)arg + offsetof(struct snd_sst_dbufs, input_bytes_consumed);
 		if (copy_to_user(dest,
 				&dbufs_local.input_bytes_consumed,
 				sizeof(unsigned long long))) {
@@ -1187,7 +1184,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 			goto free_iobufs;
 		}
 
-		dest = (char *)arg + offsetof(struct snd_sst_dbufs, input_bytes_consumed);
+		dest = (char __user *)arg + offsetof(struct snd_sst_dbufs, input_bytes_consumed);
 		if (copy_to_user(dest,
 				&dbufs_local.output_bytes_produced,
 				sizeof(unsigned long long))) {
@@ -1210,7 +1207,7 @@ free_iobufs:
 		break;
 
 	case _IOC_NR(SNDRV_SST_STREAM_BYTES_DECODED): {
-		unsigned long long *bytes = (unsigned long long *)arg;
+		unsigned long long __user *bytes = (unsigned long long __user *)arg;
 		struct snd_sst_tstamp tstamp = {0};
 
 		pr_debug("sst: STREAM_BYTES_DECODED recieved!\n");
@@ -1219,8 +1216,7 @@ free_iobufs:
 			break;
 		}
 		memcpy_fromio(&tstamp,
-			((void *)(sst_drv_ctx->mailbox + SST_TIME_STAMP)
-			+(str_id * sizeof(tstamp))),
+			sst_drv_ctx->mailbox + SST_TIME_STAMP + str_id * sizeof(tstamp),
 			sizeof(tstamp));
 		if (copy_to_user(bytes, &tstamp.bytes_processed,
 				sizeof(*bytes)))
@@ -1243,7 +1239,7 @@ free_iobufs:
 			kfree(fw_info);
 			break;
 		}
-		if (copy_to_user((struct snd_sst_dbufs *)arg,
+		if (copy_to_user((struct snd_sst_dbufs __user *)arg,
 				fw_info, sizeof(*fw_info))) {
 			kfree(fw_info);
 			retval = -EFAULT;
diff --git a/drivers/staging/intel_sst/intel_sst_common.h b/drivers/staging/intel_sst/intel_sst_common.h
index 73a98c851e4a..bf0ead78bfae 100644
--- a/drivers/staging/intel_sst/intel_sst_common.h
+++ b/drivers/staging/intel_sst/intel_sst_common.h
@@ -231,8 +231,8 @@ struct stream_info {
 	spinlock_t          pcm_lock;
 	bool			mmapped;
 	unsigned int		sg_index; /*  current buf Index  */
-	unsigned char		*cur_ptr; /*  Current static bufs  */
-	struct snd_sst_buf_entry *buf_entry;
+	unsigned char __user 	*cur_ptr; /*  Current static bufs  */
+	struct snd_sst_buf_entry __user *buf_entry;
 	struct sst_block	data_blk; /* stream ops block */
 	struct sst_block	ctrl_blk; /* stream control cmd block */
 	enum snd_sst_buf_type   buf_type;

From eccbf04a904fc99c54ab37c29a2a4dedcec66e33 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Thu, 21 Oct 2010 07:46:58 +0200
Subject: [PATCH 0335/1066] Staging: bcm: use get_user() to access user
 pointers

This fixes some places that dereference user pointers directly instead
of using get_user().

Please especially check my changes to IOCTL_BCM_GET_CURRENT_STATUS.  The
original code modified the struct which "arg" was pointing to.  I think
this was a bug in the original code and that we only wanted to write to
the OutputBuffer. Also with the original code you could read as much
memory as you wanted so I had to put a cap on OutputLength.  The only
value of OutputLength that makes sense is sizeof(LINK_STATE) so now if
OutputLength is not sizeof(LINK_STATE) it returns -EINVAL.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/bcm/Bcmchar.c | 49 +++++++++++++++++++++++------------
 1 file changed, 32 insertions(+), 17 deletions(-)

diff --git a/drivers/staging/bcm/Bcmchar.c b/drivers/staging/bcm/Bcmchar.c
index 77fdfe24d999..fead9c56162e 100644
--- a/drivers/staging/bcm/Bcmchar.c
+++ b/drivers/staging/bcm/Bcmchar.c
@@ -1001,13 +1001,15 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		}
 #endif
 		case IOCTL_BE_BUCKET_SIZE:
-			Adapter->BEBucketSize = *(PULONG)arg;
-			Status = STATUS_SUCCESS;
+			Status = 0;
+			if (get_user(Adapter->BEBucketSize, (unsigned long __user *)arg))
+				Status = -EFAULT;
 			break;
 
 		case IOCTL_RTPS_BUCKET_SIZE:
-			Adapter->rtPSBucketSize = *(PULONG)arg;
-			Status = STATUS_SUCCESS;
+			Status = 0;
+			if (get_user(Adapter->rtPSBucketSize, (unsigned long __user *)arg))
+				Status = -EFAULT;
 			break;
 		case IOCTL_CHIP_RESET:
 	    {
@@ -1028,11 +1030,15 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		case IOCTL_QOS_THRESHOLD:
 		{
 			USHORT uiLoopIndex;
-			for(uiLoopIndex = 0 ; uiLoopIndex < NO_OF_QUEUES ; uiLoopIndex++)
-			{
-				Adapter->PackInfo[uiLoopIndex].uiThreshold = *(PULONG)arg;
+
+			Status = 0;
+			for (uiLoopIndex = 0; uiLoopIndex < NO_OF_QUEUES; uiLoopIndex++) {
+				if (get_user(Adapter->PackInfo[uiLoopIndex].uiThreshold,
+						(unsigned long __user *)arg)) {
+					Status = -EFAULT;
+					break;
+				}
 			}
-			Status = STATUS_SUCCESS;
 			break;
 		}
 
@@ -1093,7 +1099,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		}
 		case IOCTL_BCM_GET_CURRENT_STATUS:
 		{
-			LINK_STATE *plink_state = NULL;
+			LINK_STATE plink_state;
+
 			/* Copy Ioctl Buffer structure */
 			if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
 			{
@@ -1101,13 +1108,19 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 				Status = -EFAULT;
 				break;
 			}
-			plink_state = (LINK_STATE*)arg;
-			plink_state->bIdleMode = (UCHAR)Adapter->IdleMode;
-			plink_state->bShutdownMode = Adapter->bShutStatus;
-			plink_state->ucLinkStatus = (UCHAR)Adapter->LinkStatus;
-			if(copy_to_user(IoBuffer.OutputBuffer,
-				(PUCHAR)plink_state, (UINT)IoBuffer.OutputLength))
-			{
+			if (IoBuffer.OutputLength != sizeof(plink_state)) {
+				Status = -EINVAL;
+				break;
+			}
+
+			if (copy_from_user(&plink_state, (void __user *)arg, sizeof(plink_state))) {
+				Status = -EFAULT;
+				break;
+			}
+			plink_state.bIdleMode = (UCHAR)Adapter->IdleMode;
+			plink_state.bShutdownMode = Adapter->bShutStatus;
+			plink_state.ucLinkStatus = (UCHAR)Adapter->LinkStatus;
+			if (copy_to_user(IoBuffer.OutputBuffer, &plink_state, IoBuffer.OutputLength)) {
 				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Copy_to_user Failed..\n");
 				Status = -EFAULT;
 				break;
@@ -1331,7 +1344,9 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 						BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Copy From User space failed. status :%d", Status);
 						return -EFAULT;
 					}
-					uiSectorSize = *((PUINT)(IoBuffer.InputBuffer)); /* FIXME: unchecked __user access */
+					if (get_user(uiSectorSize, (unsigned int __user *)IoBuffer.InputBuffer))
+						return -EFAULT;
+
 					if((uiSectorSize < MIN_SECTOR_SIZE) || (uiSectorSize > MAX_SECTOR_SIZE))
 					{
 

From 32a0fdf27c7d3742c179d84c512fb9a3432e235f Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Sat, 23 Oct 2010 18:14:05 -0700
Subject: [PATCH 0336/1066] Staging: ath6kl: ATH6KL_CFG80211 depends on
 CFG80211

ATH6KL_CFG80211 should depend on CFG80211 to fix build errors:

ERROR: "wiphy_free" [drivers/staging/ath6kl/ath6kl.ko] undefined!
ERROR: "cfg80211_inform_bss_frame" [drivers/staging/ath6kl/ath6kl.ko] undefined!
ERROR: "__ieee80211_get_channel" [drivers/staging/ath6kl/ath6kl.ko] undefined!
ERROR: "cfg80211_get_bss" [drivers/staging/ath6kl/ath6kl.ko] undefined!
ERROR: "wiphy_unregister" [drivers/staging/ath6kl/ath6kl.ko] undefined!
ERROR: "cfg80211_connect_result" [drivers/staging/ath6kl/ath6kl.ko] undefined!
ERROR: "cfg80211_michael_mic_failure" [drivers/staging/ath6kl/ath6kl.ko] undefined!
ERROR: "cfg80211_ibss_joined" [drivers/staging/ath6kl/ath6kl.ko] undefined!
ERROR: "cfg80211_roamed" [drivers/staging/ath6kl/ath6kl.ko] undefined!
ERROR: "cfg80211_put_bss" [drivers/staging/ath6kl/ath6kl.ko] undefined!
ERROR: "wiphy_new" [drivers/staging/ath6kl/ath6kl.ko] undefined!
ERROR: "wiphy_register" [drivers/staging/ath6kl/ath6kl.ko] undefined!
ERROR: "cfg80211_disconnected" [drivers/staging/ath6kl/ath6kl.ko] undefined!
ERROR: "cfg80211_scan_done" [drivers/staging/ath6kl/ath6kl.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/ath6kl/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/ath6kl/Kconfig b/drivers/staging/ath6kl/Kconfig
index ae2cdf48b74c..8a5caa30b85f 100644
--- a/drivers/staging/ath6kl/Kconfig
+++ b/drivers/staging/ath6kl/Kconfig
@@ -102,7 +102,7 @@ config AR600x_BT_RESET_PIN
 
 config ATH6KL_CFG80211
 	bool "CFG80211 support"
-	depends on ATH6K_LEGACY
+	depends on ATH6K_LEGACY && CFG80211
 	help
 	Enables support for CFG80211 APIs. The default option is to use WEXT. Even with this option enabled, WEXT is not explicitly disabled and the onus of not exercising WEXT lies on the application(s) running in the user space.
 

From 22b4dc5917a2644001e449b238ac18fb182b27fc Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 23 Oct 2010 19:54:49 +0200
Subject: [PATCH 0337/1066] Staging: ath6kl: Adapt API changes in cfg80211

The cfg80211 API changed in commit e31b82136d1adc7a599b6e99d3321e5831841f5a

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/ath6kl/os/linux/cfg80211.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/ath6kl/os/linux/cfg80211.c b/drivers/staging/ath6kl/os/linux/cfg80211.c
index c94ad29eeb4d..7269d0a1d618 100644
--- a/drivers/staging/ath6kl/os/linux/cfg80211.c
+++ b/drivers/staging/ath6kl/os/linux/cfg80211.c
@@ -808,7 +808,7 @@ ar6k_cfg80211_scanComplete_event(AR_SOFTC_T *ar, A_STATUS status)
 
 static int
 ar6k_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
-                      A_UINT8 key_index, const A_UINT8 *mac_addr,
+                      A_UINT8 key_index, bool pairwise, const A_UINT8 *mac_addr,
                       struct key_params *params)
 {
     AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(ndev);
@@ -901,7 +901,7 @@ ar6k_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
 
 static int
 ar6k_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
-                      A_UINT8 key_index, const A_UINT8 *mac_addr)
+                      A_UINT8 key_index, bool pairwise, const A_UINT8 *mac_addr)
 {
     AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(ndev);
 
@@ -936,7 +936,8 @@ ar6k_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
 
 static int
 ar6k_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev,
-                      A_UINT8 key_index, const A_UINT8 *mac_addr, void *cookie,
+                      A_UINT8 key_index, bool pairwise, const A_UINT8 *mac_addr,
+                      void *cookie,
                       void (*callback)(void *cookie, struct key_params*))
 {
     AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(ndev);

From 61241d97db02559bd83d21ffa783ab327945b925 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Tue, 26 Oct 2010 12:25:30 +0200
Subject: [PATCH 0338/1066] drivers/staging: delete double assignment

Delete successive assignments to the same location.  In three of the cases,
the two assignments are identical.  In the case of the file
rt2860/common/cmm_aes.c, the assigned variable i is never used, so both
assignments are dropped.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression i;
@@

*i = ...;
 i = ...;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c     | 1 -
 drivers/staging/hv/hv_utils.c                        | 3 ---
 drivers/staging/rt2860/common/cmm_aes.c              | 2 --
 drivers/staging/westbridge/astoria/api/src/cyasusb.c | 1 -
 4 files changed, 7 deletions(-)

diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c b/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c
index 87a6487531c2..20d509836d9e 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c
@@ -286,7 +286,6 @@ int ft1000_CreateDevice(struct ft1000_device *dev)
     pid = kernel_thread (exec_mknod, (void *)info, 0);
 
     // initialize application information
-    info->appcnt = 0;
 
 //    if (ft1000_flarion_cnt == 0) {
 //
diff --git a/drivers/staging/hv/hv_utils.c b/drivers/staging/hv/hv_utils.c
index 702a478d5542..a99e900ec4c9 100644
--- a/drivers/staging/hv/hv_utils.c
+++ b/drivers/staging/hv/hv_utils.c
@@ -211,9 +211,6 @@ static void heartbeat_onchannelcallback(void *context)
 		DPRINT_DBG(VMBUS, "heartbeat packet: len=%d, requestid=%lld",
 			   recvlen, requestid);
 
-		icmsghdrp = (struct icmsg_hdr *)&buf[
-			sizeof(struct vmbuspipe_hdr)];
-
 		icmsghdrp = (struct icmsg_hdr *)&buf[
 				sizeof(struct vmbuspipe_hdr)];
 
diff --git a/drivers/staging/rt2860/common/cmm_aes.c b/drivers/staging/rt2860/common/cmm_aes.c
index 1d159ff82fd2..a99879bada42 100644
--- a/drivers/staging/rt2860/common/cmm_aes.c
+++ b/drivers/staging/rt2860/common/cmm_aes.c
@@ -330,8 +330,6 @@ void construct_mic_iv(unsigned char *mic_iv,
 	for (i = 8; i < 14; i++)
 		mic_iv[i] = pn_vector[13 - i];	/* mic_iv[8:13] = PN[5:0] */
 #endif
-	i = (payload_length / 256);
-	i = (payload_length % 256);
 	mic_iv[14] = (unsigned char)(payload_length / 256);
 	mic_iv[15] = (unsigned char)(payload_length % 256);
 
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasusb.c b/drivers/staging/westbridge/astoria/api/src/cyasusb.c
index 5a2197012065..7777d9a60a52 100644
--- a/drivers/staging/westbridge/astoria/api/src/cyasusb.c
+++ b/drivers/staging/westbridge/astoria/api/src/cyasusb.c
@@ -1417,7 +1417,6 @@ cy_as_usb_set_enum_config(cy_as_device_handle handle,
 	 */
 	bus_mask   = 0;
 	media_mask = 0;
-	media_mask = 0;
 	for (bus = 0; bus < CY_AS_MAX_BUSES; bus++) {
 		for (device = 0; device < CY_AS_MAX_STORAGE_DEVICES; device++) {
 			if (config_p->devices_to_enumerate[bus][device] ==

From 4fd68ae1a558043a2cc4ea2faf7235e71c3241aa Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Tue, 26 Oct 2010 12:25:33 +0200
Subject: [PATCH 0339/1066] drivers/staging/brcm80211/brcmfmac/dhd_linux.c:
 delete double assignment

Delete successive assignments to the same location.  dhd_ops_virt contains
a subset of the definitions of dhd_ops_pri.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression i;
@@

*i = ...;
 i = ...;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/brcm80211/brcmfmac/dhd_linux.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_linux.c b/drivers/staging/brcm80211/brcmfmac/dhd_linux.c
index bbbe7c5f7492..9335f02029aa 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_linux.c
@@ -2222,8 +2222,6 @@ int dhd_net_attach(dhd_pub_t *dhdp, int ifidx)
 	ASSERT(net);
 
 	ASSERT(!net->netdev_ops);
-	net->netdev_ops = &dhd_ops_virt;
-
 	net->netdev_ops = &dhd_ops_pri;
 
 	/*

From 0d58fef68c2f34c06b3f205acd5e895f82e26812 Mon Sep 17 00:00:00 2001
From: Brett Rudley <brudley@broadcom.com>
Date: Tue, 26 Oct 2010 10:05:14 -0700
Subject: [PATCH 0340/1066] staging: brcm80211: Maintainer change

Nohee => Dowan

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/brcm80211/README | 2 +-
 drivers/staging/brcm80211/TODO   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/brcm80211/README b/drivers/staging/brcm80211/README
index c3ba9bb9b116..c8f1cf1b4409 100644
--- a/drivers/staging/brcm80211/README
+++ b/drivers/staging/brcm80211/README
@@ -90,5 +90,5 @@ Contact Info:
 =============
 Brett Rudley	brudley@broadcom.com
 Henry Ptasinski henryp@broadcom.com
-Nohee Ko	noheek@broadcom.com
+Dowan Kim 	dowan@broadcom.com
 
diff --git a/drivers/staging/brcm80211/TODO b/drivers/staging/brcm80211/TODO
index 8803d300b531..dbf904184899 100644
--- a/drivers/staging/brcm80211/TODO
+++ b/drivers/staging/brcm80211/TODO
@@ -45,5 +45,5 @@ Contact
 =====
 Brett Rudley <brudley@broadcom.com>
 Henry Ptasinski <henryp@broadcom.com>
-Nohee Ko <noheek@broadcom.com>
+Dowan Kim <dowan@broadcom.com>
 

From 705059a670f3af2b37695e82de0ee58e75e656ed Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Thu, 28 Oct 2010 08:47:13 -0500
Subject: [PATCH 0341/1066] staging: rt2870: Add new USB ID for Belkin F6D4050
 v1

Add new USB ID for FT2870 for Belkin F6D4050 v1

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported- and Tested-by: James Long <crogonint@yahoo.com>
Cc: Stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/rt2860/usb_main_dev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c
index ebf9074a9083..ddacfc6c4861 100644
--- a/drivers/staging/rt2860/usb_main_dev.c
+++ b/drivers/staging/rt2860/usb_main_dev.c
@@ -65,6 +65,7 @@ struct usb_device_id rtusb_usb_id[] = {
 	{USB_DEVICE(0x14B2, 0x3C07)},	/* AL */
 	{USB_DEVICE(0x050D, 0x8053)},	/* Belkin */
 	{USB_DEVICE(0x050D, 0x825B)},	/* Belkin */
+	{USB_DEVICE(0x050D, 0x935A)},	/* Belkin F6D4050 v1 */
 	{USB_DEVICE(0x050D, 0x935B)},	/* Belkin F6D4050 v2 */
 	{USB_DEVICE(0x14B2, 0x3C23)},	/* Airlink */
 	{USB_DEVICE(0x14B2, 0x3C27)},	/* Airlink */

From eacd121c3d0b74220aa6a91223e0adf7d5ec2497 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segooon@gmail.com>
Date: Fri, 29 Oct 2010 00:02:11 +0400
Subject: [PATCH 0342/1066] staging: vt6656: implement missing brackets

Identation says that copy_to_user() should be called only iff
wrq->u.essid.pointer is not zero.  Also it is useless to call copy_to_user(0, ...).

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/vt6656/main_usb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index e992d5d9e15b..7cc3d2407d1b 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -1675,13 +1675,14 @@ static int  device_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) {
 
 		{
 			char essid[IW_ESSID_MAX_SIZE+1];
-			if (wrq->u.essid.pointer)
+			if (wrq->u.essid.pointer) {
 				rc = iwctl_giwessid(dev, NULL,
 						    &(wrq->u.essid), essid);
 				if (copy_to_user(wrq->u.essid.pointer,
 						         essid,
 						         wrq->u.essid.length) )
 					rc = -EFAULT;
+			}
 		}
 		break;
 

From 43f88d530ec656d9b556fb0d127b30757b1c3d35 Mon Sep 17 00:00:00 2001
From: Daniel Lichtenberger <daniel.lichtenberger@gmail.com>
Date: Thu, 28 Oct 2010 23:20:12 +0200
Subject: [PATCH 0343/1066] Staging: rtl8192e: fix IOMMU memory leak

Unmap the rx buffer before mapping the new one in rtl8192_rx.

Failing to do so quickly exhausts the IOMMU memory during downloads:

[...] DMA: Out of SW-IOMMU space for 9100 bytes at device ...

Using "iommu=off mem=4g" also fixes the problem because
then pci_map_single does not allocate memory.

Tested on my personal laptop with a RTL8192E device. Without this
patch the kernel quickly runs out of IOMMU memory (downloading 5 MB
of data is sufficient to trigger it), with this patch applied
I haven't experienced any issues so far.

Signed-off-by: Daniel Lichtenberger <daniel.lichtenberger@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/rtl8192e/r8192E_core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c
index a202194b5cbb..b1786dcac245 100644
--- a/drivers/staging/rtl8192e/r8192E_core.c
+++ b/drivers/staging/rtl8192e/r8192E_core.c
@@ -5829,6 +5829,9 @@ static void rtl8192_rx(struct net_device *dev)
                     }
                 }
 
+		pci_unmap_single(priv->pdev, *((dma_addr_t *) skb->cb),
+			priv->rxbuffersize, PCI_DMA_FROMDEVICE);
+
                 skb = new_skb;
                 priv->rx_buf[priv->rx_idx] = skb;
                 *((dma_addr_t *) skb->cb) = pci_map_single(priv->pdev, skb_tail_pointer(skb), priv->rxbuffersize, PCI_DMA_FROMDEVICE);

From 31a9f47aa081292d1c750002724aa23b3bd44bb8 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sun, 31 Oct 2010 15:33:55 -0700
Subject: [PATCH 0344/1066] Staging: udlfb.c: Fix k.alloc switched arguments

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/udlfb/udlfb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/staging/udlfb/udlfb.c
index 5969e848d297..fed25105970a 100644
--- a/drivers/staging/udlfb/udlfb.c
+++ b/drivers/staging/udlfb/udlfb.c
@@ -887,7 +887,7 @@ static int dlfb_ops_open(struct fb_info *info, int user)
 
 		struct fb_deferred_io *fbdefio;
 
-		fbdefio = kmalloc(GFP_KERNEL, sizeof(struct fb_deferred_io));
+		fbdefio = kmalloc(sizeof(struct fb_deferred_io), GFP_KERNEL);
 
 		if (fbdefio) {
 			fbdefio->delay = DL_DEFIO_WRITE_DELAY;

From 65f8e441ed3c31c456aa70db1fbe50fb42079375 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 9 Nov 2010 10:48:25 +0000
Subject: [PATCH 0345/1066] tty: Fix formatting in tty.h

Someone added a new ldisc number and messed up the tabbing. Fix it before
anyone else copies it.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 include/linux/tty.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/tty.h b/include/linux/tty.h
index 2a754748dd5f..c7ea9bc8897c 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -50,7 +50,7 @@
 #define N_V253		19	/* Codec control over voice modem */
 #define N_CAIF		20      /* CAIF protocol for talking to modems */
 #define N_GSM0710	21	/* GSM 0710 Mux */
-#define N_TI_WL	22	/* for TI's WL BT, FM, GPS combo chips */
+#define N_TI_WL		22	/* for TI's WL BT, FM, GPS combo chips */
 
 /*
  * This character is the same as _POSIX_VDISABLE: it cannot be used as

From dc98d9650891661a20842a8eef9e76536046d897 Mon Sep 17 00:00:00 2001
From: Andres Salomon <dilinger@queued.net>
Date: Tue, 9 Nov 2010 14:10:38 -0800
Subject: [PATCH 0346/1066] tty: fix warning in synclink driver
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

During builds I see the following warning -

  CC [M]  drivers/char/pcmcia/synclink_cs.o
drivers/char/pcmcia/synclink_cs.c:2194: warning: ‘mgslpc_get_icount’ defined but not used

The function is a callback meant to be assigned to get_icount (added during 0587102cf).
Fix accordingly.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/char/pcmcia/synclink_cs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index bfc10f89d951..eaa41992fbe2 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -2796,6 +2796,7 @@ static const struct tty_operations mgslpc_ops = {
 	.hangup = mgslpc_hangup,
 	.tiocmget = tiocmget,
 	.tiocmset = tiocmset,
+	.get_icount = mgslpc_get_icount,
 	.proc_fops = &mgslpc_proc_fops,
 };
 

From 68e29655cc51761d60d5f27b2738816a5b13e415 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 26 Oct 2010 15:56:34 +0100
Subject: [PATCH 0347/1066] nozomi: Fix warning from the previous TIOCGCOUNT
 changes

Just remove a now unused variable

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/char/nozomi.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index dd3f9b1f11b4..294d03e8c61a 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -1828,7 +1828,6 @@ static int ntty_ioctl(struct tty_struct *tty, struct file *file,
 		      unsigned int cmd, unsigned long arg)
 {
 	struct port *port = tty->driver_data;
-	void __user *argp = (void __user *)arg;
 	int rval = -ENOIOCTLCMD;
 
 	DBG1("******** IOCTL, cmd: %d", cmd);

From c9bd9d01db02319c33767da5ee310ea37afda059 Mon Sep 17 00:00:00 2001
From: Mikulas Patocka <mpatocka@redhat.com>
Date: Tue, 26 Oct 2010 14:20:48 -0400
Subject: [PATCH 0348/1066] 8250: add support for Kouwell KW-L221N-2

Add support for Kouwell KW-L221N-2 card.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/serial/8250_pci.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 53be4d35a0aa..2ada93e19cc3 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2863,6 +2863,9 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
 		0, 0,
 		pbn_b0_4_1152000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0x9505,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_921600 },
 
 		/*
 		 * The below card is a little controversial since it is the

From e045fec48970df84647a47930fcf7a22ff7229c0 Mon Sep 17 00:00:00 2001
From: Jiri Olsa <jolsa@redhat.com>
Date: Mon, 8 Nov 2010 19:01:47 +0100
Subject: [PATCH 0349/1066] tty: prevent DOS in the flush_to_ldisc

There's a small window inside the flush_to_ldisc function,
where the tty is unlocked and calling ldisc's receive_buf
function. If in this window new buffer is added to the tty,
the processing might never leave the flush_to_ldisc function.

This scenario will hog the cpu, causing other tty processing
starving, and making it impossible to interface the computer
via tty.

I was able to exploit this via pty interface by sending only
control characters to the master input, causing the flush_to_ldisc
to be scheduled, but never actually generate any output.

To reproduce, please run multiple instances of following code.

- SNIP
#define _XOPEN_SOURCE
#include <stdlib.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>

int main(int argc, char **argv)
{
        int i, slave, master = getpt();
        char buf[8192];

        sprintf(buf, "%s", ptsname(master));
        grantpt(master);
        unlockpt(master);

        slave = open(buf, O_RDWR);
        if (slave < 0) {
                perror("open slave failed");
                return 1;
        }

        for(i = 0; i < sizeof(buf); i++)
                buf[i] = rand() % 32;

        while(1) {
                write(master, buf, sizeof(buf));
        }

        return 0;
}
- SNIP

The attached patch (based on -next tree) fixes this by checking on the
tty buffer tail. Once it's reached, the current work is rescheduled
and another could run.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: stable <stable@kernel.org>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/tty/tty_buffer.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index cc1e9850d655..d8210ca00720 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -413,7 +413,8 @@ static void flush_to_ldisc(struct work_struct *work)
 	spin_lock_irqsave(&tty->buf.lock, flags);
 
 	if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) {
-		struct tty_buffer *head;
+		struct tty_buffer *head, *tail = tty->buf.tail;
+		int seen_tail = 0;
 		while ((head = tty->buf.head) != NULL) {
 			int count;
 			char *char_buf;
@@ -423,6 +424,15 @@ static void flush_to_ldisc(struct work_struct *work)
 			if (!count) {
 				if (head->next == NULL)
 					break;
+				/*
+				  There's a possibility tty might get new buffer
+				  added during the unlock window below. We could
+				  end up spinning in here forever hogging the CPU
+				  completely. To avoid this let's have a rest each
+				  time we processed the tail buffer.
+				*/
+				if (tail == head)
+					seen_tail = 1;
 				tty->buf.head = head->next;
 				tty_buffer_free(tty, head);
 				continue;
@@ -432,7 +442,7 @@ static void flush_to_ldisc(struct work_struct *work)
 			   line discipline as we want to empty the queue */
 			if (test_bit(TTY_FLUSHPENDING, &tty->flags))
 				break;
-			if (!tty->receive_room) {
+			if (!tty->receive_room || seen_tail) {
 				schedule_delayed_work(&tty->buf.work, 1);
 				break;
 			}

From a89f2466a9e5032514776b67926295b6296d702e Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sun, 7 Nov 2010 13:10:23 -0800
Subject: [PATCH 0350/1066] drivers/serial/bfin_5xx.c: Fix line continuation
 defects

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/serial/bfin_5xx.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index a9eff2b18eab..351cc03578eb 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -734,8 +734,7 @@ static int bfin_serial_startup(struct uart_port *port)
 			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
 			IRQF_DISABLED, "BFIN_UART_CTS", uart)) {
 			uart->cts_pin = -1;
-			pr_info("Unable to attach BlackFin UART CTS interrupt.\
-				 So, disable it.\n");
+			pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n");
 		}
 	}
 	if (uart->rts_pin >= 0) {
@@ -747,8 +746,7 @@ static int bfin_serial_startup(struct uart_port *port)
 	if (request_irq(uart->status_irq,
 		bfin_serial_mctrl_cts_int,
 		IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
-		pr_info("Unable to attach BlackFin UART Modem \
-			Status interrupt.\n");
+		pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n");
 	}
 
 	/* CTS RTS PINs are negative assertive. */

From ebf7c06635fbcf21a59e60187e166c5c23c57b06 Mon Sep 17 00:00:00 2001
From: Maciej Szmigiero <mhej@o2.pl>
Date: Tue, 26 Oct 2010 21:48:21 +0200
Subject: [PATCH 0351/1066] SERIAL: blacklist si3052 chip

[SERIAL]blacklist si3052 chip

Si3052-based softmodems aren't serial ports so don't bind serial driver to them.
Allows proper driver to bind to them.

Signed-off-by: Maciej Szmigiero <mhej@o2.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/serial/8250_pci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 2ada93e19cc3..842e3b2a02b1 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2285,6 +2285,8 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 
 static const struct pci_device_id softmodem_blacklist[] = {
 	{ PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
+	{ PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */
+	{ PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */
 };
 
 /*

From 100eeae2c5ce23b4db93ff320ee330ef1d740151 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Sun, 31 Oct 2010 23:17:51 +0100
Subject: [PATCH 0352/1066] TTY: restore tty_ldisc_wait_idle

It was removed in 65b770468e98 (tty-ldisc: turn ldisc user count into
a proper refcount), but we need to wait for last user to quit the
ldisc before we close it in tty_set_ldisc.

Otherwise weird things start to happen. There might be processes
waiting in tty_read->n_tty_read on tty->read_wait for input to appear
and at that moment, a change of ldisc is fatal. n_tty_close is called,
it frees read_buf and the waiting process is still in the middle of
reading and goes nuts after it is woken.

Previously we prevented close to happen when others are in ldisc ops
by tty_ldisc_wait_idle in tty_set_ldisc. But the commit above removed
that. So revoke the change and test whether there is 1 user (=we), and
allow the close then.

We can do that without ldisc/tty locks, because nobody else can open
the device due to TTY_LDISC_CHANGING bit set, so we in fact wait for
everybody to leave.

I don't understand why tty_ldisc_lock would be needed either when the
counter is an atomic variable, so this is a lockless
tty_ldisc_wait_idle.

On the other hand, if we fail to wait (timeout or signal), we have to
reenable the halted ldiscs, so we take ldisc lock and reuse the setup
path at the end of tty_set_ldisc.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Sebastian Andrzej Siewior <bigeasy@breakpoint.cc>
LKML-Reference: <20101031104136.GA511@Chamillionaire.breakpoint.cc>
LKML-Reference: <1287669539-22644-1-git-send-email-jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Cc: stable@kernel.org [32, 33, 36]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/tty/tty_ldisc.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 412f9775d19c..5bbf33ad49f1 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -47,6 +47,7 @@
 
 static DEFINE_SPINLOCK(tty_ldisc_lock);
 static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
+static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_idle);
 /* Line disc dispatch table */
 static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
 
@@ -83,6 +84,7 @@ static void put_ldisc(struct tty_ldisc *ld)
 		return;
 	}
 	local_irq_restore(flags);
+	wake_up(&tty_ldisc_idle);
 }
 
 /**
@@ -530,6 +532,23 @@ static int tty_ldisc_halt(struct tty_struct *tty)
 	return cancel_delayed_work_sync(&tty->buf.work);
 }
 
+/**
+ *	tty_ldisc_wait_idle	-	wait for the ldisc to become idle
+ *	@tty: tty to wait for
+ *
+ *	Wait for the line discipline to become idle. The discipline must
+ *	have been halted for this to guarantee it remains idle.
+ */
+static int tty_ldisc_wait_idle(struct tty_struct *tty)
+{
+	int ret;
+	ret = wait_event_interruptible_timeout(tty_ldisc_idle,
+			atomic_read(&tty->ldisc->users) == 1, 5 * HZ);
+	if (ret < 0)
+		return ret;
+	return ret > 0 ? 0 : -EBUSY;
+}
+
 /**
  *	tty_set_ldisc		-	set line discipline
  *	@tty: the terminal to set
@@ -634,8 +653,17 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	flush_scheduled_work();
 
+	retval = tty_ldisc_wait_idle(tty);
+
 	tty_lock();
 	mutex_lock(&tty->ldisc_mutex);
+
+	/* handle wait idle failure locked */
+	if (retval) {
+		tty_ldisc_put(new_ldisc);
+		goto enable;
+	}
+
 	if (test_bit(TTY_HUPPED, &tty->flags)) {
 		/* We were raced by the hangup method. It will have stomped
 		   the ldisc data and closed the ldisc down */
@@ -669,6 +697,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	tty_ldisc_put(o_ldisc);
 
+enable:
 	/*
 	 *	Allow ldisc referencing to occur again
 	 */

From 69669455b049c0f1f04bb306625c5d4db6838b11 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Fri, 5 Nov 2010 18:51:34 +0100
Subject: [PATCH 0353/1066] drm/i915: Fix I2C adapter registration

Fix many small bugs in I2C adapter registration:
* Properly reject unsupported GPIO pin.
* Fix improper use of I2C_NAME_SIZE (which is the size of
  i2c_client.name, not i2c_adapter.name.)
* Prefix adapter names with "i915" so that the user knows what the
  I2C channel is connected to.
* Fix swapped characters in the string used to name the GPIO-based
  adapter.
* Add missing comma in gmbus name table.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_i2c.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 2be4f728ed0c..3dba086e7eea 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -160,7 +160,7 @@ intel_gpio_create(struct drm_i915_private *dev_priv, u32 pin)
 	};
 	struct intel_gpio *gpio;
 
-	if (pin < 1 || pin > 7)
+	if (pin >= ARRAY_SIZE(map_pin_to_reg) || !map_pin_to_reg[pin])
 		return NULL;
 
 	gpio = kzalloc(sizeof(struct intel_gpio), GFP_KERNEL);
@@ -172,7 +172,8 @@ intel_gpio_create(struct drm_i915_private *dev_priv, u32 pin)
 		gpio->reg += PCH_GPIOA - GPIOA;
 	gpio->dev_priv = dev_priv;
 
-	snprintf(gpio->adapter.name, I2C_NAME_SIZE, "GPIO%c", "?BACDEF?"[pin]);
+	snprintf(gpio->adapter.name, sizeof(gpio->adapter.name),
+		 "i915 GPIO%c", "?BACDE?F"[pin]);
 	gpio->adapter.owner = THIS_MODULE;
 	gpio->adapter.algo_data	= &gpio->algo;
 	gpio->adapter.dev.parent = &dev_priv->dev->pdev->dev;
@@ -349,7 +350,7 @@ int intel_setup_gmbus(struct drm_device *dev)
 		"panel",
 		"dpc",
 		"dpb",
-		"reserved"
+		"reserved",
 		"dpd",
 	};
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -366,8 +367,8 @@ int intel_setup_gmbus(struct drm_device *dev)
 		bus->adapter.owner = THIS_MODULE;
 		bus->adapter.class = I2C_CLASS_DDC;
 		snprintf(bus->adapter.name,
-			 I2C_NAME_SIZE,
-			 "gmbus %s",
+			 sizeof(bus->adapter.name),
+			 "i915 gmbus %s",
 			 names[i]);
 
 		bus->adapter.dev.parent = &dev->pdev->dev;

From 1c95ba1e1de7edffc0c4e275e147f1a9eb1f81ae Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Philippe=20R=C3=A9tornaz?= <philippe.retornaz@epfl.ch>
Date: Wed, 27 Oct 2010 17:13:21 +0200
Subject: [PATCH 0354/1066] tty_ldisc: Fix BUG() on hangup

A kernel BUG when bluetooth rfcomm connection drop while the associated
serial port is open is sometime triggered.

It seems that the line discipline can disappear between the
tty_ldisc_put and tty_ldisc_get. This patch fall back to the N_TTY line
discipline if the previous discipline is not available anymore.

Signed-off-by: Philippe Retornaz <philippe.retornaz@epfl.ch>
Acked-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/tty/tty_ldisc.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 5bbf33ad49f1..d8e96b005023 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -743,9 +743,12 @@ static void tty_reset_termios(struct tty_struct *tty)
  *	state closed
  */
 
-static void tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
+static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
 {
-	struct tty_ldisc *ld;
+	struct tty_ldisc *ld = tty_ldisc_get(ldisc);
+
+	if (IS_ERR(ld))
+		return -1;
 
 	tty_ldisc_close(tty, tty->ldisc);
 	tty_ldisc_put(tty->ldisc);
@@ -753,10 +756,10 @@ static void tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
 	/*
 	 *	Switch the line discipline back
 	 */
-	ld = tty_ldisc_get(ldisc);
-	BUG_ON(IS_ERR(ld));
 	tty_ldisc_assign(tty, ld);
 	tty_set_termios_ldisc(tty, ldisc);
+
+	return 0;
 }
 
 /**
@@ -831,13 +834,16 @@ void tty_ldisc_hangup(struct tty_struct *tty)
 	   a FIXME */
 	if (tty->ldisc) {	/* Not yet closed */
 		if (reset == 0) {
-			tty_ldisc_reinit(tty, tty->termios->c_line);
-			err = tty_ldisc_open(tty, tty->ldisc);
+
+			if (!tty_ldisc_reinit(tty, tty->termios->c_line))
+				err = tty_ldisc_open(tty, tty->ldisc);
+			else
+				err = 1;
 		}
 		/* If the re-open fails or we reset then go to N_TTY. The
 		   N_TTY open cannot fail */
 		if (reset || err) {
-			tty_ldisc_reinit(tty, N_TTY);
+			BUG_ON(tty_ldisc_reinit(tty, N_TTY));
 			WARN_ON(tty_ldisc_open(tty, tty->ldisc));
 		}
 		tty_ldisc_enable(tty);

From f581cf21b48c305c6fbbc3db5ef905deb19131e5 Mon Sep 17 00:00:00 2001
From: Chris Lang <clang@gateworks.com>
Date: Thu, 4 Nov 2010 23:02:29 +0100
Subject: [PATCH 0355/1066] Staging: batman-adv: fix interface alternating and
 bonding reggression

55d1666b521cbed95924c8d4775fe272c103f08c incidentally disabled bonding
of packets first entering the mesh along with also disabling interface
alternating regardless of where the packet came from. This re-enables
these options.

Signed-off-by: Chris Lang <clang@gateworks.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/batman-adv/routing.c | 12 ++++--------
 drivers/staging/batman-adv/routing.h |  4 ++--
 drivers/staging/batman-adv/unicast.c |  2 +-
 3 files changed, 7 insertions(+), 11 deletions(-)

diff --git a/drivers/staging/batman-adv/routing.c b/drivers/staging/batman-adv/routing.c
index 90102631330b..657b69e6b957 100644
--- a/drivers/staging/batman-adv/routing.c
+++ b/drivers/staging/batman-adv/routing.c
@@ -1000,10 +1000,10 @@ int recv_icmp_packet(struct sk_buff *skb, struct batman_if *recv_if)
 
 /* find a suitable router for this originator, and use
  * bonding if possible. */
-struct neigh_node *find_router(struct orig_node *orig_node,
+struct neigh_node *find_router(struct bat_priv *bat_priv,
+			       struct orig_node *orig_node,
 			       struct batman_if *recv_if)
 {
-	struct bat_priv *bat_priv;
 	struct orig_node *primary_orig_node;
 	struct orig_node *router_orig;
 	struct neigh_node *router, *first_candidate, *best_router;
@@ -1019,13 +1019,9 @@ struct neigh_node *find_router(struct orig_node *orig_node,
 	/* without bonding, the first node should
 	 * always choose the default router. */
 
-	if (!recv_if)
-		return orig_node->router;
-
-	bat_priv = netdev_priv(recv_if->soft_iface);
 	bonding_enabled = atomic_read(&bat_priv->bonding_enabled);
 
-	if (!bonding_enabled)
+	if ((!recv_if) && (!bonding_enabled))
 		return orig_node->router;
 
 	router_orig = orig_node->router->orig_node;
@@ -1154,7 +1150,7 @@ static int route_unicast_packet(struct sk_buff *skb,
 	orig_node = ((struct orig_node *)
 		     hash_find(bat_priv->orig_hash, unicast_packet->dest));
 
-	router = find_router(orig_node, recv_if);
+	router = find_router(bat_priv, orig_node, recv_if);
 
 	if (!router) {
 		spin_unlock_irqrestore(&bat_priv->orig_hash_lock, flags);
diff --git a/drivers/staging/batman-adv/routing.h b/drivers/staging/batman-adv/routing.h
index 06ea99df3706..92674c8d9c03 100644
--- a/drivers/staging/batman-adv/routing.h
+++ b/drivers/staging/batman-adv/routing.h
@@ -38,8 +38,8 @@ int recv_ucast_frag_packet(struct sk_buff *skb, struct batman_if *recv_if);
 int recv_bcast_packet(struct sk_buff *skb, struct batman_if *recv_if);
 int recv_vis_packet(struct sk_buff *skb, struct batman_if *recv_if);
 int recv_bat_packet(struct sk_buff *skb, struct batman_if *recv_if);
-struct neigh_node *find_router(struct orig_node *orig_node,
-		struct batman_if *recv_if);
+struct neigh_node *find_router(struct bat_priv *bat_priv,
+		struct orig_node *orig_node, struct batman_if *recv_if);
 void update_bonding_candidates(struct bat_priv *bat_priv,
 			       struct orig_node *orig_node);
 
diff --git a/drivers/staging/batman-adv/unicast.c b/drivers/staging/batman-adv/unicast.c
index 0dac50d69c03..0459413ff67f 100644
--- a/drivers/staging/batman-adv/unicast.c
+++ b/drivers/staging/batman-adv/unicast.c
@@ -224,7 +224,7 @@ int unicast_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv)
 	if (!orig_node)
 		orig_node = transtable_search(bat_priv, ethhdr->h_dest);
 
-	router = find_router(orig_node, NULL);
+	router = find_router(bat_priv, orig_node, NULL);
 
 	if (!router)
 		goto unlock;

From 4d774a7fed886522f55119ef524cbe3c90bbdc38 Mon Sep 17 00:00:00 2001
From: Marek Lindner <lindner_marek@yahoo.de>
Date: Thu, 4 Nov 2010 23:02:30 +0100
Subject: [PATCH 0356/1066] Staging: batman-adv: suppress false warning when
 changing the mac address

Whenever the mac address of an batman interface is changed
check_known_mac_addr() is called to print a warning if the newly added
mac address exists an another batman interface. While looping through
the batman interface list check_known_mac_addr() only compares mac
addresses and does not make sure they belong to different interfaces,
thus always printing a warning.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/batman-adv/hard-interface.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/batman-adv/hard-interface.c b/drivers/staging/batman-adv/hard-interface.c
index 80cfa8669585..b68a7e5173be 100644
--- a/drivers/staging/batman-adv/hard-interface.c
+++ b/drivers/staging/batman-adv/hard-interface.c
@@ -165,7 +165,7 @@ static void update_mac_addresses(struct batman_if *batman_if)
 	       batman_if->net_dev->dev_addr, ETH_ALEN);
 }
 
-static void check_known_mac_addr(uint8_t *addr)
+static void check_known_mac_addr(struct net_device *net_dev)
 {
 	struct batman_if *batman_if;
 
@@ -175,11 +175,16 @@ static void check_known_mac_addr(uint8_t *addr)
 		    (batman_if->if_status != IF_TO_BE_ACTIVATED))
 			continue;
 
-		if (!compare_orig(batman_if->net_dev->dev_addr, addr))
+		if (batman_if->net_dev == net_dev)
+			continue;
+
+		if (!compare_orig(batman_if->net_dev->dev_addr,
+				  net_dev->dev_addr))
 			continue;
 
 		pr_warning("The newly added mac address (%pM) already exists "
-			   "on: %s\n", addr, batman_if->net_dev->name);
+			   "on: %s\n", net_dev->dev_addr,
+			   batman_if->net_dev->name);
 		pr_warning("It is strongly recommended to keep mac addresses "
 			   "unique to avoid problems!\n");
 	}
@@ -430,7 +435,7 @@ static struct batman_if *hardif_add_interface(struct net_device *net_dev)
 	atomic_set(&batman_if->refcnt, 0);
 	hardif_hold(batman_if);
 
-	check_known_mac_addr(batman_if->net_dev->dev_addr);
+	check_known_mac_addr(batman_if->net_dev);
 
 	spin_lock(&if_list_lock);
 	list_add_tail_rcu(&batman_if->list, &if_list);
@@ -515,7 +520,7 @@ static int hard_if_event(struct notifier_block *this,
 			goto out;
 		}
 
-		check_known_mac_addr(batman_if->net_dev->dev_addr);
+		check_known_mac_addr(batman_if->net_dev);
 		update_mac_addresses(batman_if);
 
 		bat_priv = netdev_priv(batman_if->soft_iface);

From 5f2e87738627d6c0faa50d9f401da0b1571e439c Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Sun, 7 Nov 2010 17:19:39 +0000
Subject: [PATCH 0357/1066] Staging: ath6kl: Fix pointer casts on 64-bit
 architectures

Remove unnecessary cast of firmware base address to integer before
adding an offset.

Fix direct use of sk_buff::network_header which is an offset rather
than a pointer on 64-bit architectures.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/ath6kl/os/linux/ar6000_drv.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/ath6kl/os/linux/ar6000_drv.c b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
index c5a6d6c16735..a659f7047373 100644
--- a/drivers/staging/ath6kl/os/linux/ar6000_drv.c
+++ b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
@@ -1126,7 +1126,7 @@ ar6000_transfer_bin_file(AR_SOFTC_T *ar, AR6K_BIN_FILE file, A_UINT32 address, A
         if ((board_ext_address) && (fw_entry->size == (board_data_size + board_ext_data_size))) {
             A_UINT32 param;
 
-            status = BMIWriteMemory(ar->arHifDevice, board_ext_address, (A_UCHAR *)(((A_UINT32)fw_entry->data) + board_data_size), board_ext_data_size);
+            status = BMIWriteMemory(ar->arHifDevice, board_ext_address, (A_UCHAR *)(fw_entry->data + board_data_size), board_ext_data_size);
 
             if (status != A_OK) {
                 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__));
@@ -3030,7 +3030,8 @@ ar6000_data_tx(struct sk_buff *skb, struct net_device *dev)
         A_UINT8 csumDest=0;
         A_UINT8 csum=skb->ip_summed;
         if(csumOffload && (csum==CHECKSUM_PARTIAL)){
-            csumStart=skb->csum_start-(skb->network_header-skb->head)+sizeof(ATH_LLC_SNAP_HDR);
+            csumStart = (skb->head + skb->csum_start - skb_network_header(skb) +
+			 sizeof(ATH_LLC_SNAP_HDR));
             csumDest=skb->csum_offset+csumStart;
         }
 #endif

From 34a488c1e0eabcea65e846d934fa51860fe66248 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Sun, 7 Nov 2010 17:22:41 +0000
Subject: [PATCH 0358/1066] Staging: Update parameters for cfg80211 key
 management operation

Commit e31b82136d1adc7a599b6e99d3321e5831841f5a ("cfg80211/mac80211:
allow per-station GTKs") changed the signatures of these operations
but did not update the staging drivers.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c | 12 ++++++------
 drivers/staging/wlan-ng/cfg80211.c               |  6 +++---
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
index 3f29488d9c72..ea0825238d53 100644
--- a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
@@ -95,12 +95,12 @@ static s32 wl_cfg80211_config_default_key(struct wiphy *wiphy,
 					    struct net_device *dev,
 					    u8 key_idx);
 static s32 wl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *dev,
-				 u8 key_idx, const u8 *mac_addr,
+				 u8 key_idx, bool pairwise, const u8 *mac_addr,
 				 struct key_params *params);
 static s32 wl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *dev,
-				 u8 key_idx, const u8 *mac_addr);
+				 u8 key_idx, bool pairwise, const u8 *mac_addr);
 static s32 wl_cfg80211_get_key(struct wiphy *wiphy, struct net_device *dev,
-				 u8 key_idx, const u8 *mac_addr,
+				 u8 key_idx, bool pairwise, const u8 *mac_addr,
 				 void *cookie, void (*callback) (void *cookie,
 								 struct
 								 key_params *
@@ -1615,7 +1615,7 @@ wl_add_keyext(struct wiphy *wiphy, struct net_device *dev,
 
 static s32
 wl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *dev,
-		    u8 key_idx, const u8 *mac_addr,
+		    u8 key_idx, bool pairwise, const u8 *mac_addr,
 		    struct key_params *params)
 {
 	struct wl_wsec_key key;
@@ -1700,7 +1700,7 @@ wl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *dev,
 
 static s32
 wl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *dev,
-		    u8 key_idx, const u8 *mac_addr)
+		    u8 key_idx, bool pairwise, const u8 *mac_addr)
 {
 	struct wl_wsec_key key;
 	s32 err = 0;
@@ -1756,7 +1756,7 @@ wl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *dev,
 
 static s32
 wl_cfg80211_get_key(struct wiphy *wiphy, struct net_device *dev,
-		    u8 key_idx, const u8 *mac_addr, void *cookie,
+		    u8 key_idx, bool pairwise, const u8 *mac_addr, void *cookie,
 		    void (*callback) (void *cookie, struct key_params * params))
 {
 	struct key_params params;
diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c
index 4af83d5318f2..6a71f52c59b1 100644
--- a/drivers/staging/wlan-ng/cfg80211.c
+++ b/drivers/staging/wlan-ng/cfg80211.c
@@ -139,7 +139,7 @@ exit:
 }
 
 int prism2_add_key(struct wiphy *wiphy, struct net_device *dev,
-		   u8 key_index, const u8 *mac_addr,
+		   u8 key_index, bool pairwise, const u8 *mac_addr,
 		   struct key_params *params)
 {
 	wlandevice_t *wlandev = dev->ml_priv;
@@ -198,7 +198,7 @@ exit:
 }
 
 int prism2_get_key(struct wiphy *wiphy, struct net_device *dev,
-		   u8 key_index, const u8 *mac_addr, void *cookie,
+		   u8 key_index, bool pairwise, const u8 *mac_addr, void *cookie,
 		   void (*callback)(void *cookie, struct key_params*))
 {
 	wlandevice_t *wlandev = dev->ml_priv;
@@ -227,7 +227,7 @@ int prism2_get_key(struct wiphy *wiphy, struct net_device *dev,
 }
 
 int prism2_del_key(struct wiphy *wiphy, struct net_device *dev,
-		   u8 key_index, const u8 *mac_addr)
+		   u8 key_index, bool pairwise, const u8 *mac_addr)
 {
 	wlandevice_t *wlandev = dev->ml_priv;
 	u32 did;

From c3444e50b211f0c7b680a115fe1485694493dc82 Mon Sep 17 00:00:00 2001
From: Maximiliano David Bustos <md.bustos90@gmail.com>
Date: Mon, 8 Nov 2010 17:34:57 -0300
Subject: [PATCH 0359/1066] Staging: wlan-ng: Fix wrong #ifdef #endif sequence

This patch fixes bug #13820 from bugzilla.kernel.org.

Quote: "If ETHTOOL_GLINK is not defined, the end for switch case is not
to be found."

Signed-off-by: Maximiliano David Bustos <md.bustos90@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/wlan-ng/p80211netdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/wlan-ng/p80211netdev.c b/drivers/staging/wlan-ng/p80211netdev.c
index aa1792c8429e..b7b4a733b467 100644
--- a/drivers/staging/wlan-ng/p80211netdev.c
+++ b/drivers/staging/wlan-ng/p80211netdev.c
@@ -522,8 +522,8 @@ static int p80211netdev_ethtool(wlandevice_t *wlandev, void __user *useraddr)
 		if (copy_to_user(useraddr, &edata, sizeof(edata)))
 			return -EFAULT;
 		return 0;
-	}
 #endif
+	}
 
 	return -EOPNOTSUPP;
 }

From 2b66b50b12cabc05f05543e792d4c9c2465d5702 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Michel=20D=C3=A4nzer?= <daenzer@vmware.com>
Date: Tue, 9 Nov 2010 11:50:05 +0100
Subject: [PATCH 0360/1066] drm/radeon/kms: Fix retrying ttm_bo_init() after it
 failed once.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

If ttm_bo_init() returns failure, it already destroyed the BO, so we need to
retry from scratch.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_object.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index d7ab91416410..8eb183466015 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -102,6 +102,8 @@ int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj,
 		type = ttm_bo_type_device;
 	}
 	*bo_ptr = NULL;
+
+retry:
 	bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL);
 	if (bo == NULL)
 		return -ENOMEM;
@@ -109,8 +111,6 @@ int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj,
 	bo->gobj = gobj;
 	bo->surface_reg = -1;
 	INIT_LIST_HEAD(&bo->list);
-
-retry:
 	radeon_ttm_placement_from_domain(bo, domain);
 	/* Kernel allocation are uninterruptible */
 	mutex_lock(&rdev->vram_mutex);

From 7dfbbdcffebc41441e64278961f57d2840a76259 Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue, 9 Nov 2010 21:31:44 +0100
Subject: [PATCH 0361/1066] drm/ttm: Be consistent on ttm_bo_init() failures

Call destroy() on _all_ ttm_bo_init() failures, and make sure that
behavior is documented in the function description.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/ttm/ttm_bo.c | 4 ++++
 include/drm/ttm/ttm_bo_api.h | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index ce464579c485..3ca77dc03915 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -1144,6 +1144,10 @@ int ttm_bo_init(struct ttm_bo_device *bdev,
 	num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
 	if (num_pages == 0) {
 		printk(KERN_ERR TTM_PFX "Illegal buffer object size.\n");
+		if (destroy)
+			(*destroy)(bo);
+		else
+			kfree(bo);
 		return -EINVAL;
 	}
 	bo->destroy = destroy;
diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h
index 5afa5b52063e..beafc156a535 100644
--- a/include/drm/ttm/ttm_bo_api.h
+++ b/include/drm/ttm/ttm_bo_api.h
@@ -432,6 +432,10 @@ extern void ttm_bo_synccpu_write_release(struct ttm_buffer_object *bo);
  * together with the @destroy function,
  * enables driver-specific objects derived from a ttm_buffer_object.
  * On successful return, the object kref and list_kref are set to 1.
+ * If a failure occurs, the function will call the @destroy function, or
+ * kfree() if @destroy is NULL. Thus, after a failure, dereferencing @bo is
+ * illegal and will likely cause memory corruption.
+ *
  * Returns
  * -ENOMEM: Out of memory.
  * -EINVAL: Invalid placement flags.

From 91d63f8a306722dbf1b400d4afb11f69512977ad Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Thu, 4 Nov 2010 11:05:55 +0000
Subject: [PATCH 0362/1066] fbdev: sh_mobile_hdmi: properly clean up modedb on
 monitor unplug

Even though this is not a problem currently, it is better to clear the freed
pointer and nullify the length of the freed memory.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sh_mobile_hdmi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index 55b3077ff6ff..d7df10315d8d 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -1071,6 +1071,10 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 		if (!hdmi->info)
 			goto out;
 
+		hdmi->monspec.modedb_len = 0;
+		fb_destroy_modedb(hdmi->monspec.modedb);
+		hdmi->monspec.modedb = NULL;
+
 		acquire_console_sem();
 
 		/* HDMI disconnect */
@@ -1078,7 +1082,6 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 
 		release_console_sem();
 		pm_runtime_put(hdmi->dev);
-		fb_destroy_modedb(hdmi->monspec.modedb);
 	}
 
 out:

From 5ae0cf82df212253857326a6706018eccb658683 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Thu, 4 Nov 2010 11:06:01 +0000
Subject: [PATCH 0363/1066] fbdev: sh_mobile_lcdc: use the standard CEA-861
 720p timing

sh_mobile_lcdcfb.c has a hard-coded 720p video mode, used as default, if none
is explicitly specified by the platform. Adjust its timing to match the CEA
standard. Also add an explicit refresh rate value, which is needed, when used
with HDMI, to be able to recognise the default 720p mode as a pre-programmed
VIC #4.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sh_mobile_lcdcfb.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 50963739a409..a87dace49cb7 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -115,15 +115,16 @@ static const struct fb_videomode default_720p = {
 	.xres = 1280,
 	.yres = 720,
 
-	.left_margin = 200,
-	.right_margin = 88,
-	.hsync_len = 48,
+	.left_margin = 220,
+	.right_margin = 110,
+	.hsync_len = 40,
 
 	.upper_margin = 20,
 	.lower_margin = 5,
 	.vsync_len = 5,
 
 	.pixclock = 13468,
+	.refresh = 60,
 	.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
 };
 

From 5fd284e6cd39f731db86dfd2440553365d5fad4d Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Thu, 4 Nov 2010 11:06:11 +0000
Subject: [PATCH 0364/1066] fbdev: sh_mobile_lcdc: use correct number of modes,
 when using the default

Fix zero mode number, when using the default 720p mode.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sh_mobile_lcdcfb.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index a87dace49cb7..9b1364723c65 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -1198,6 +1198,7 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 		const struct fb_videomode *mode = cfg->lcd_cfg;
 		unsigned long max_size = 0;
 		int k;
+		int num_cfg;
 
 		ch->info = framebuffer_alloc(0, &pdev->dev);
 		if (!ch->info) {
@@ -1233,8 +1234,14 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 		info->fix = sh_mobile_lcdc_fix;
 		info->fix.smem_len = max_size * (cfg->bpp / 8) * 2;
 
-		if (!mode)
+		if (!mode) {
 			mode = &default_720p;
+			num_cfg = 1;
+		} else {
+			num_cfg = ch->cfg.num_cfg;
+		}
+
+		fb_videomode_to_modelist(mode, num_cfg, &info->modelist);
 
 		fb_videomode_to_var(var, mode);
 		/* Default Y virtual resolution is 2x panel size */
@@ -1282,10 +1289,6 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 
 	for (i = 0; i < j; i++) {
 		struct sh_mobile_lcdc_chan *ch = priv->ch + i;
-		const struct fb_videomode *mode = ch->cfg.lcd_cfg;
-
-		if (!mode)
-			mode = &default_720p;
 
 		info = ch->info;
 
@@ -1298,7 +1301,6 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 			}
 		}
 
-		fb_videomode_to_modelist(mode, ch->cfg.num_cfg, &info->modelist);
 		error = register_framebuffer(info);
 		if (error < 0)
 			goto err1;

From a3da8e451321c31d88cebd12c234d0aac2a1cc35 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Sat, 6 Nov 2010 11:47:24 +0300
Subject: [PATCH 0365/1066] perf, ui: Eliminate stack-smashing protection
 compiler complaint
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The gcc complains about small auto-var strings being allocated from stack space.
Make them const to avoid this:

 | CC util/ui/util.o
 | cc1: warnings being treated as errors
 | util/ui/util.c: In function ‘ui__dialog_yesno’:
 | util/ui/util.c:108: error: not protecting function: no buffer at least 8 bytes long
 | make: *** [util/ui/util.o] Error 1

The real bug is in the newtWinChoice() ABI - but that's an
externality we cannot fix here, so we use this workaround.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20101106084724.GA5956@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 tools/perf/util/ui/util.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/ui/util.c b/tools/perf/util/ui/util.c
index 9706d9d40279..056c69521a38 100644
--- a/tools/perf/util/ui/util.c
+++ b/tools/perf/util/ui/util.c
@@ -104,9 +104,10 @@ out_destroy_form:
 	return rc;
 }
 
+static const char yes[] = "Yes", no[] = "No";
+
 bool ui__dialog_yesno(const char *msg)
 {
 	/* newtWinChoice should really be accepting const char pointers... */
-	char yes[] = "Yes", no[] = "No";
-	return newtWinChoice(NULL, yes, no, (char *)msg) == 1;
+	return newtWinChoice(NULL, (char *)yes, (char *)no, (char *)msg) == 1;
 }

From 8e5e9521c13ff8cf6727999999c8d88cc64b5ff7 Mon Sep 17 00:00:00 2001
From: Jesper Juhl <jj@chaosbits.net>
Date: Tue, 9 Nov 2010 00:08:11 +0100
Subject: [PATCH 0366/1066] x86: Remove unnecessary casts of void ptr returning
 alloc function return values

The [vk][cmz]alloc(_node) family of functions return void
pointers which it's completely unnecessary/pointless to cast to
other pointer types since that happens implicitly.

This patch removes such casts from arch/x86.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: trivial@kernel.org
Cc: amd64-microcode@amd64.org
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <alpine.LNX.2.00.1011082310220.23697@swampdragon.chaosbits.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/microcode_amd.c |  2 +-
 arch/x86/platform/uv/tlb_uv.c   | 13 ++++++-------
 2 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index e1af7c055c7d..ce0cb4721c9a 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -212,7 +212,7 @@ static int install_equiv_cpu_table(const u8 *buf)
 		return 0;
 	}
 
-	equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size);
+	equiv_cpu_table = vmalloc(size);
 	if (!equiv_cpu_table) {
 		pr_err("failed to allocate equivalent CPU table\n");
 		return 0;
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 20ea20a39e2a..a318194002b5 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -1343,8 +1343,8 @@ uv_activation_descriptor_init(int node, int pnode)
 	 * each bau_desc is 64 bytes; there are 8 (UV_ITEMS_PER_DESCRIPTOR)
 	 * per cpu; and up to 32 (UV_ADP_SIZE) cpu's per uvhub
 	 */
-	bau_desc = (struct bau_desc *)kmalloc_node(sizeof(struct bau_desc)*
-		UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
+	bau_desc = kmalloc_node(sizeof(struct bau_desc) * UV_ADP_SIZE
+				* UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
 	BUG_ON(!bau_desc);
 
 	pa = uv_gpa(bau_desc); /* need the real nasid*/
@@ -1402,9 +1402,9 @@ uv_payload_queue_init(int node, int pnode)
 	struct bau_payload_queue_entry *pqp_malloc;
 	struct bau_control *bcp;
 
-	pqp = (struct bau_payload_queue_entry *) kmalloc_node(
-		(DEST_Q_SIZE + 1) * sizeof(struct bau_payload_queue_entry),
-		GFP_KERNEL, node);
+	pqp = kmalloc_node((DEST_Q_SIZE + 1)
+			   * sizeof(struct bau_payload_queue_entry),
+			   GFP_KERNEL, node);
 	BUG_ON(!pqp);
 	pqp_malloc = pqp;
 
@@ -1520,8 +1520,7 @@ static void __init uv_init_per_cpu(int nuvhubs)
 
 	timeout_us = calculate_destination_timeout();
 
-	uvhub_descs = (struct uvhub_desc *)
-		kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
+	uvhub_descs = kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
 	memset(uvhub_descs, 0, nuvhubs * sizeof(struct uvhub_desc));
 	uvhub_mask = kzalloc((nuvhubs+7)/8, GFP_KERNEL);
 	for_each_present_cpu(cpu) {

From 01797c599816d39dfea47864c0f90cd50845811f Mon Sep 17 00:00:00 2001
From: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Date: Mon, 8 Nov 2010 18:20:45 -0800
Subject: [PATCH 0367/1066] perf: Fix usages of profile_cpu in builtin-top.c to
 use cpu_list

profile_cpu was left over from an earlier implementation that
supported running perf top on a single CPU.  profile_cpu was no
longer set by any switch and usages of it resulted in dead code.

Instead, convert the code to use cpu_list, which is set by the
-C <cpu_list> option.

Also improved the printing of nr_cpus and cpu_list by correcting
the plurals.

Signed-off-by: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: a.p.zijlstra@chello.nl
Cc: acme@redhat.com
LKML-Reference: <1289269245-9388-1-git-send-email-cjashfor@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 tools/perf/builtin-top.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index b513e40974f4..dd625808c2a5 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -69,7 +69,6 @@ static int			target_tid			=     -1;
 static pid_t			*all_tids			=      NULL;
 static int			thread_num			=      0;
 static bool			inherit				=  false;
-static int			profile_cpu			=     -1;
 static int			nr_cpus				=      0;
 static int			realtime_prio			=      0;
 static bool			group				=  false;
@@ -558,13 +557,13 @@ static void print_sym_table(void)
 	else
 		printf(" (all");
 
-	if (profile_cpu != -1)
-		printf(", cpu: %d)\n", profile_cpu);
+	if (cpu_list)
+		printf(", CPU%s: %s)\n", nr_cpus > 1 ? "s" : "", cpu_list);
 	else {
 		if (target_tid != -1)
 			printf(")\n");
 		else
-			printf(", %d CPUs)\n", nr_cpus);
+			printf(", %d CPU%s)\n", nr_cpus, nr_cpus > 1 ? "s" : "");
 	}
 
 	printf("%-*.*s\n", win_width, win_width, graph_dotted_line);
@@ -1187,11 +1186,10 @@ int group_fd;
 static void start_counter(int i, int counter)
 {
 	struct perf_event_attr *attr;
-	int cpu;
+	int cpu = -1;
 	int thread_index;
 
-	cpu = profile_cpu;
-	if (target_tid == -1 && profile_cpu == -1)
+	if (target_tid == -1)
 		cpu = cpumap[i];
 
 	attr = attrs + counter;

From ed10b490ea6498f76284043565d42ca3649ccca1 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 10 Nov 2010 18:02:25 +0900
Subject: [PATCH 0368/1066] sh: clkfwk: fix up compiler warnings.

  CC      drivers/sh/clk/core.o
drivers/sh/clk/core.c: In function 'clk_round_parent':
drivers/sh/clk/core.c:574: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'unsigned int'
drivers/sh/clk/core.c:594: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'unsigned int'

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/sh/clk/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
index 09615b51d591..cb12a8e1466b 100644
--- a/drivers/sh/clk/core.c
+++ b/drivers/sh/clk/core.c
@@ -571,7 +571,7 @@ long clk_round_parent(struct clk *clk, unsigned long target,
 					*best_freq = freq_max;
 			}
 
-			pr_debug("too low freq %lu, error %lu\n", freq->frequency,
+			pr_debug("too low freq %u, error %lu\n", freq->frequency,
 				 target - freq_max);
 
 			if (!error)
@@ -591,7 +591,7 @@ long clk_round_parent(struct clk *clk, unsigned long target,
 					*best_freq = freq_min;
 			}
 
-			pr_debug("too high freq %lu, error %lu\n", freq->frequency,
+			pr_debug("too high freq %u, error %lu\n", freq->frequency,
 				 freq_min - target);
 
 			if (!error)

From 25591b07033663e09f5e60355fc5ec4d4aa53e63 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Wed, 10 Nov 2010 10:05:51 +0100
Subject: [PATCH 0369/1066] [S390] fix get_user_pages_fast

The check for the _PAGE_RO bit in get_user_pages_fast for write==1 is
the wrong way around. It must not be set for the fast path.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/mm/gup.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 38e641cdd977..45b405ca2567 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -20,18 +20,17 @@
 static inline int gup_pte_range(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
 		unsigned long end, int write, struct page **pages, int *nr)
 {
-	unsigned long mask, result;
+	unsigned long mask;
 	pte_t *ptep, pte;
 	struct page *page;
 
-	result = write ? 0 : _PAGE_RO;
-	mask = result | _PAGE_INVALID | _PAGE_SPECIAL;
+	mask = (write ? _PAGE_RO : 0) | _PAGE_INVALID | _PAGE_SPECIAL;
 
 	ptep = ((pte_t *) pmd_deref(pmd)) + pte_index(addr);
 	do {
 		pte = *ptep;
 		barrier();
-		if ((pte_val(pte) & mask) != result)
+		if ((pte_val(pte) & mask) != 0)
 			return 0;
 		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
 		page = pte_page(pte);

From 3b210e7652a0ac638b1a267b6a181c8f742d8462 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Wed, 10 Nov 2010 10:05:52 +0100
Subject: [PATCH 0370/1066] [S390] tape: add medium state notifications

Add uevent notifications for tape cartridge load and tape
cartridge unload events.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/char/tape_core.c | 68 ++++++++++++++++++++++++++++++-----
 1 file changed, 59 insertions(+), 9 deletions(-)

diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 6c408670e08d..b3a3e8e8656e 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -209,29 +209,79 @@ tape_state_set(struct tape_device *device, enum tape_state newstate)
 	wake_up(&device->state_change_wq);
 }
 
+struct tape_med_state_work_data {
+	struct tape_device *device;
+	enum tape_medium_state state;
+	struct work_struct  work;
+};
+
+static void
+tape_med_state_work_handler(struct work_struct *work)
+{
+	static char env_state_loaded[] = "MEDIUM_STATE=LOADED";
+	static char env_state_unloaded[] = "MEDIUM_STATE=UNLOADED";
+	struct tape_med_state_work_data *p =
+		container_of(work, struct tape_med_state_work_data, work);
+	struct tape_device *device = p->device;
+	char *envp[] = { NULL, NULL };
+
+	switch (p->state) {
+	case MS_UNLOADED:
+		pr_info("%s: The tape cartridge has been successfully "
+			"unloaded\n", dev_name(&device->cdev->dev));
+		envp[0] = env_state_unloaded;
+		kobject_uevent_env(&device->cdev->dev.kobj, KOBJ_CHANGE, envp);
+		break;
+	case MS_LOADED:
+		pr_info("%s: A tape cartridge has been mounted\n",
+			dev_name(&device->cdev->dev));
+		envp[0] = env_state_loaded;
+		kobject_uevent_env(&device->cdev->dev.kobj, KOBJ_CHANGE, envp);
+		break;
+	default:
+		break;
+	}
+	tape_put_device(device);
+	kfree(p);
+}
+
+static void
+tape_med_state_work(struct tape_device *device, enum tape_medium_state state)
+{
+	struct tape_med_state_work_data *p;
+
+	p = kzalloc(sizeof(*p), GFP_ATOMIC);
+	if (p) {
+		INIT_WORK(&p->work, tape_med_state_work_handler);
+		p->device = tape_get_device(device);
+		p->state = state;
+		schedule_work(&p->work);
+	}
+}
+
 void
 tape_med_state_set(struct tape_device *device, enum tape_medium_state newstate)
 {
-	if (device->medium_state == newstate)
+	enum tape_medium_state oldstate;
+
+	oldstate = device->medium_state;
+	if (oldstate == newstate)
 		return;
+	device->medium_state = newstate;
 	switch(newstate){
 	case MS_UNLOADED:
 		device->tape_generic_status |= GMT_DR_OPEN(~0);
-		if (device->medium_state == MS_LOADED)
-			pr_info("%s: The tape cartridge has been successfully "
-				"unloaded\n", dev_name(&device->cdev->dev));
+		if (oldstate == MS_LOADED)
+			tape_med_state_work(device, MS_UNLOADED);
 		break;
 	case MS_LOADED:
 		device->tape_generic_status &= ~GMT_DR_OPEN(~0);
-		if (device->medium_state == MS_UNLOADED)
-			pr_info("%s: A tape cartridge has been mounted\n",
-				dev_name(&device->cdev->dev));
+		if (oldstate == MS_UNLOADED)
+			tape_med_state_work(device, MS_LOADED);
 		break;
 	default:
-		// print nothing
 		break;
 	}
-	device->medium_state = newstate;
 	wake_up(&device->state_change_wq);
 }
 

From 16d2ce271c6b8b3527ed1461d03b5f373d53f78f Mon Sep 17 00:00:00 2001
From: Sebastian Ott <sebott@linux.vnet.ibm.com>
Date: Wed, 10 Nov 2010 10:05:53 +0100
Subject: [PATCH 0371/1066] [S390] cio: fix incorrect ccw_device_init_count

If device recognition is interrupted by a subchannel event
indicating that the device is gone, ccw_device_init_count
is not correctly decreased.

Fix this by reporting the corresponding event to the device
recognition callback via the state machine.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/cio/device.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 2ff8a22d4257..e8391b89eff4 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -1455,7 +1455,16 @@ static int io_subchannel_sch_event(struct subchannel *sch, int process)
 		break;
 	case IO_SCH_UNREG_ATTACH:
 	case IO_SCH_UNREG:
-		if (cdev)
+		if (!cdev)
+			break;
+		if (cdev->private->state == DEV_STATE_SENSE_ID) {
+			/*
+			 * Note: delayed work triggered by this event
+			 * and repeated calls to sch_event are synchronized
+			 * by the above check for work_pending(cdev).
+			 */
+			dev_fsm_event(cdev, DEV_EVENT_NOTOPER);
+		} else
 			ccw_device_set_notoper(cdev);
 		break;
 	case IO_SCH_NOP:

From ca768b663131ca644689fcadc9ca092dcc96a758 Mon Sep 17 00:00:00 2001
From: Stefan Weinhuber <wein@de.ibm.com>
Date: Wed, 10 Nov 2010 10:05:54 +0100
Subject: [PATCH 0372/1066] [S390] vmlogrdr: purge after recording is switched
 off

If automatic purge is enabled for a vmlogrdr device, old records are
purged before an IUCV recording service is switched on or off. If z/VM
generates a large number of records between purging and switching the
recording service off, these records remain queued, and may have a
negative performance impact on the z/VM system. To avoid this problem,
we need to purge the records after recording is switched off.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/char/vmlogrdr.c | 36 ++++++++++++++++++++++++------------
 1 file changed, 24 insertions(+), 12 deletions(-)

diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index 9f661426e4a1..1cc726b98ec8 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -249,27 +249,25 @@ static int vmlogrdr_recording(struct vmlogrdr_priv_t * logptr,
 	char cp_command[80];
 	char cp_response[160];
 	char *onoff, *qid_string;
+	int rc;
 
-	memset(cp_command, 0x00, sizeof(cp_command));
-	memset(cp_response, 0x00, sizeof(cp_response));
-
-        onoff = ((action == 1) ? "ON" : "OFF");
+	onoff = ((action == 1) ? "ON" : "OFF");
 	qid_string = ((recording_class_AB == 1) ? " QID * " : "");
 
-        /*
+	/*
 	 * The recording commands needs to be called with option QID
 	 * for guests that have previlege classes A or B.
 	 * Purging has to be done as separate step, because recording
 	 * can't be switched on as long as records are on the queue.
 	 * Doing both at the same time doesn't work.
 	 */
-
-	if (purge) {
+	if (purge && (action == 1)) {
+		memset(cp_command, 0x00, sizeof(cp_command));
+		memset(cp_response, 0x00, sizeof(cp_response));
 		snprintf(cp_command, sizeof(cp_command),
 			 "RECORDING %s PURGE %s",
 			 logptr->recording_name,
 			 qid_string);
-
 		cpcmd(cp_command, cp_response, sizeof(cp_response), NULL);
 	}
 
@@ -279,19 +277,33 @@ static int vmlogrdr_recording(struct vmlogrdr_priv_t * logptr,
 		logptr->recording_name,
 		onoff,
 		qid_string);
-
 	cpcmd(cp_command, cp_response, sizeof(cp_response), NULL);
 	/* The recording command will usually answer with 'Command complete'
 	 * on success, but when the specific service was never connected
 	 * before then there might be an additional informational message
 	 * 'HCPCRC8072I Recording entry not found' before the
-         * 'Command complete'. So I use strstr rather then the strncmp.
+	 * 'Command complete'. So I use strstr rather then the strncmp.
 	 */
 	if (strstr(cp_response,"Command complete"))
-		return 0;
+		rc = 0;
 	else
-		return -EIO;
+		rc = -EIO;
+	/*
+	 * If we turn recording off, we have to purge any remaining records
+	 * afterwards, as a large number of queued records may impact z/VM
+	 * performance.
+	 */
+	if (purge && (action == 0)) {
+		memset(cp_command, 0x00, sizeof(cp_command));
+		memset(cp_response, 0x00, sizeof(cp_response));
+		snprintf(cp_command, sizeof(cp_command),
+			 "RECORDING %s PURGE %s",
+			 logptr->recording_name,
+			 qid_string);
+		cpcmd(cp_command, cp_response, sizeof(cp_response), NULL);
+	}
 
+	return rc;
 }
 
 

From ec6743bb06510c7b629603ce35713d6ae9273579 Mon Sep 17 00:00:00 2001
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Wed, 10 Nov 2010 10:05:55 +0100
Subject: [PATCH 0373/1066] [S390] mm: add devmem_is_allowed() for
 STRICT_DEVMEM checking

Provide the devmem_is_allowed() routine to restrict access to
kernel memory from userspace.
Set the CONFIG_STRICT_DEVMEM config option to switch on checking.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/Kconfig.debug      | 12 ++++++++++++
 arch/s390/include/asm/page.h |  5 +++++
 2 files changed, 17 insertions(+)

diff --git a/arch/s390/Kconfig.debug b/arch/s390/Kconfig.debug
index 45e0c6199f36..05221b13ffb1 100644
--- a/arch/s390/Kconfig.debug
+++ b/arch/s390/Kconfig.debug
@@ -6,6 +6,18 @@ config TRACE_IRQFLAGS_SUPPORT
 
 source "lib/Kconfig.debug"
 
+config STRICT_DEVMEM
+	def_bool y
+	prompt "Filter access to /dev/mem"
+	---help---
+	  This option restricts access to /dev/mem.  If this option is
+	  disabled, you allow userspace access to all memory, including
+	  kernel and userspace memory. Accidental memory access is likely
+	  to be disastrous.
+	  Memory access is required for experts who want to debug the kernel.
+
+	  If you are unsure, say Y.
+
 config DEBUG_STRICT_USER_COPY_CHECKS
 	bool "Strict user copy size checks"
 	---help---
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index a8729ea7e9ac..3c987e9ec8d6 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -130,6 +130,11 @@ struct page;
 void arch_free_page(struct page *page, int order);
 void arch_alloc_page(struct page *page, int order);
 
+static inline int devmem_is_allowed(unsigned long pfn)
+{
+	return 0;
+}
+
 #define HAVE_ARCH_FREE_PAGE
 #define HAVE_ARCH_ALLOC_PAGE
 

From becf91f18750cf1c60828aa2ee63a36b05c2e4d0 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 10 Nov 2010 10:05:56 +0100
Subject: [PATCH 0374/1066] [S390] ftrace: build without frame pointers on s390

s390 doesn't need FRAME_POINTERS in order to have a working function tracer.
We don't need frame pointers in order to get strack traces since we always
have valid backchains by using the -mkernel-backchain gcc option.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 kernel/trace/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index e04b8bcdef88..ea37e2ff4164 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -126,7 +126,7 @@ if FTRACE
 config FUNCTION_TRACER
 	bool "Kernel Function Tracer"
 	depends on HAVE_FUNCTION_TRACER
-	select FRAME_POINTER if (!ARM_UNWIND)
+	select FRAME_POINTER if !ARM_UNWIND && !S390
 	select KALLSYMS
 	select GENERIC_TRACER
 	select CONTEXT_SWITCH_TRACER

From adb45839817392102e659c19e5c19aa39530021f Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Wed, 10 Nov 2010 10:05:57 +0100
Subject: [PATCH 0375/1066] [S390] kprobes: disable interrupts throughout

Execute the kprobe exception and fault handler with interrupts disabled.
To disable the interrupts only while a single step is in progress is not
good enough, a kprobe from interrupt context while another kprobe is
handled can confuse the internal house keeping.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/kprobes.c | 41 +++++++++++++++++++++++++-------------
 1 file changed, 27 insertions(+), 14 deletions(-)

diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index d60fc4398516..70cf73bdba25 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -30,6 +30,7 @@
 #include <asm/sections.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/hardirq.h>
 
 DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
 DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
@@ -212,7 +213,7 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 	/* Set the PER control regs, turns on single step for this address */
 	__ctl_load(kprobe_per_regs, 9, 11);
 	regs->psw.mask |= PSW_MASK_PER;
-	regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK);
+	regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT);
 }
 
 static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
@@ -239,7 +240,7 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 	__get_cpu_var(current_kprobe) = p;
 	/* Save the interrupt and per flags */
 	kcb->kprobe_saved_imask = regs->psw.mask &
-	    (PSW_MASK_PER | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK);
+		(PSW_MASK_PER | PSW_MASK_IO | PSW_MASK_EXT);
 	/* Save the control regs that govern PER */
 	__ctl_store(kcb->kprobe_saved_ctl, 9, 11);
 }
@@ -316,8 +317,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 		return 1;
 
 ss_probe:
-	if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
-		local_irq_disable();
 	prepare_singlestep(p, regs);
 	kcb->kprobe_status = KPROBE_HIT_SS;
 	return 1;
@@ -465,8 +464,6 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 		goto out;
 	}
 	reset_current_kprobe();
-	if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
-		local_irq_enable();
 out:
 	preempt_enable_no_resched();
 
@@ -482,7 +479,7 @@ out:
 	return 1;
 }
 
-int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+static int __kprobes kprobe_trap_handler(struct pt_regs *regs, int trapnr)
 {
 	struct kprobe *cur = kprobe_running();
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
@@ -508,8 +505,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 			restore_previous_kprobe(kcb);
 		else {
 			reset_current_kprobe();
-			if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
-				local_irq_enable();
 		}
 		preempt_enable_no_resched();
 		break;
@@ -553,6 +548,18 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 	return 0;
 }
 
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+	int ret;
+
+	if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+		local_irq_disable();
+	ret = kprobe_trap_handler(regs, trapnr);
+	if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+		local_irq_restore(regs->psw.mask & ~PSW_MASK_PER);
+	return ret;
+}
+
 /*
  * Wrapper routine to for handling exceptions.
  */
@@ -560,8 +567,12 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 				       unsigned long val, void *data)
 {
 	struct die_args *args = (struct die_args *)data;
+	struct pt_regs *regs = args->regs;
 	int ret = NOTIFY_DONE;
 
+	if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+		local_irq_disable();
+
 	switch (val) {
 	case DIE_BPT:
 		if (kprobe_handler(args->regs))
@@ -572,16 +583,17 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 			ret = NOTIFY_STOP;
 		break;
 	case DIE_TRAP:
-		/* kprobe_running() needs smp_processor_id() */
-		preempt_disable();
-		if (kprobe_running() &&
-		    kprobe_fault_handler(args->regs, args->trapnr))
+		if (!preemptible() && kprobe_running() &&
+		    kprobe_trap_handler(args->regs, args->trapnr))
 			ret = NOTIFY_STOP;
-		preempt_enable();
 		break;
 	default:
 		break;
 	}
+
+	if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+		local_irq_restore(regs->psw.mask & ~PSW_MASK_PER);
+
 	return ret;
 }
 
@@ -595,6 +607,7 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 
 	/* setup return addr to the jprobe handler routine */
 	regs->psw.addr = (unsigned long)(jp->entry) | PSW_ADDR_AMODE;
+	regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT);
 
 	/* r14 is the function return address */
 	kcb->jprobe_saved_r14 = (unsigned long)regs->gprs[14];

From 89480801a17a3069f45169d40b828c8e511aa005 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Wed, 10 Nov 2010 10:05:58 +0100
Subject: [PATCH 0376/1066] [S390] kprobes: Fix the return address of multiple
 kretprobes

Analog to git commit 737480a0d525dae13306296da08029dff545bc72
fix the return address of subsequent kretprobes when multiple
kretprobes are set on the same function.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/kprobes.c | 29 ++++++++++++++++++++++++++---
 1 file changed, 26 insertions(+), 3 deletions(-)

diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 70cf73bdba25..2564793ec2b6 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -349,6 +349,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	struct hlist_node *node, *tmp;
 	unsigned long flags, orig_ret_address = 0;
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
+	kprobe_opcode_t *correct_ret_addr = NULL;
 
 	INIT_HLIST_HEAD(&empty_rp);
 	kretprobe_hash_lock(current, &head, &flags);
@@ -371,10 +372,32 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 			/* another task is sharing our hash bucket */
 			continue;
 
-		if (ri->rp && ri->rp->handler)
-			ri->rp->handler(ri, regs);
+		orig_ret_address = (unsigned long)ri->ret_addr;
+
+		if (orig_ret_address != trampoline_address)
+			/*
+			 * This is the real return address. Any other
+			 * instances associated with this task are for
+			 * other calls deeper on the call stack
+			 */
+			break;
+	}
+
+	kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
+	correct_ret_addr = ri->ret_addr;
+	hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
+		if (ri->task != current)
+			/* another task is sharing our hash bucket */
+			continue;
 
 		orig_ret_address = (unsigned long)ri->ret_addr;
+
+		if (ri->rp && ri->rp->handler) {
+			ri->ret_addr = correct_ret_addr;
+			ri->rp->handler(ri, regs);
+		}
+
 		recycle_rp_inst(ri, &empty_rp);
 
 		if (orig_ret_address != trampoline_address) {
@@ -386,7 +409,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 			break;
 		}
 	}
-	kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
 	regs->psw.addr = orig_ret_address | PSW_ADDR_AMODE;
 
 	reset_current_kprobe();

From 62b0cfc240b1d4601333912ef8760e0ca9ec2cec Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Sat, 6 Nov 2010 15:41:04 -0500
Subject: [PATCH 0377/1066] x86, UV: Update node controller MMRs

A new version of the SGI UV hub node controller is being
developed. A few of the MMRs (control registers) that exist on
the current hub no longer exist on the new hub. Fortunately,
there are alternate MMRs that are are functionally equivalent
and that exist on both hubs.

This patch changes the UV code to use MMRs that exist in BOTH
versions of the hub node controller.

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20101106204056.GA27584@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/uv/uv_mmrs.h  | 189 +++++++++++++++--------------
 arch/x86/kernel/apic/x2apic_uv_x.c |  12 +-
 2 files changed, 102 insertions(+), 99 deletions(-)

diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
index b2f2d2e05cec..6d90adf4428a 100644
--- a/arch/x86/include/asm/uv/uv_mmrs.h
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -805,6 +805,78 @@ union uvh_node_present_table_u {
     } s;
 };
 
+/* ========================================================================= */
+/*                 UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR 0x16000c8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_0_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_overlay_config_0_mmr_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                 UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR 0x16000d8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_1_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_overlay_config_1_mmr_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                 UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR 0x16000e8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_2_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_overlay_config_2_mmr_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
 /* ========================================================================= */
 /*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR                  */
 /* ========================================================================= */
@@ -856,6 +928,29 @@ union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
     } s;
 };
 
+/* ========================================================================= */
+/*                          UVH_RH_GAM_CONFIG_MMR                            */
+/* ========================================================================= */
+#define UVH_RH_GAM_CONFIG_MMR 0x1600000UL
+
+#define UVH_RH_GAM_CONFIG_MMR_M_SKT_SHFT 0
+#define UVH_RH_GAM_CONFIG_MMR_M_SKT_MASK 0x000000000000003fUL
+#define UVH_RH_GAM_CONFIG_MMR_N_SKT_SHFT 6
+#define UVH_RH_GAM_CONFIG_MMR_N_SKT_MASK 0x00000000000003c0UL
+#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_SHFT 12
+#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_MASK 0x0000000000001000UL
+
+union uvh_rh_gam_config_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_config_mmr_s {
+	unsigned long	m_skt     :  6;  /* RW */
+	unsigned long	n_skt     :  4;  /* RW */
+	unsigned long	rsvd_10_11:  2;  /*    */
+	unsigned long	mmiol_cfg :  1;  /* RW */
+	unsigned long	rsvd_13_63: 51;  /*    */
+    } s;
+};
+
 /* ========================================================================= */
 /*                    UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR                      */
 /* ========================================================================= */
@@ -987,97 +1082,5 @@ union uvh_rtc1_int_config_u {
     } s;
 };
 
-/* ========================================================================= */
-/*                          UVH_SI_ADDR_MAP_CONFIG                           */
-/* ========================================================================= */
-#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
 
-#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0
-#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL
-#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8
-#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL
-
-union uvh_si_addr_map_config_u {
-    unsigned long	v;
-    struct uvh_si_addr_map_config_s {
-	unsigned long	m_skt :  6;  /* RW */
-	unsigned long	rsvd_6_7:  2;  /*    */
-	unsigned long	n_skt :  4;  /* RW */
-	unsigned long	rsvd_12_63: 52;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                       UVH_SI_ALIAS0_OVERLAY_CONFIG                        */
-/* ========================================================================= */
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL
-
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias0_overlay_config_u {
-    unsigned long	v;
-    struct uvh_si_alias0_overlay_config_s {
-	unsigned long	rsvd_0_23: 24;  /*    */
-	unsigned long	base    :  8;  /* RW */
-	unsigned long	rsvd_32_47: 16;  /*    */
-	unsigned long	m_alias :  5;  /* RW */
-	unsigned long	rsvd_53_62: 10;  /*    */
-	unsigned long	enable  :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                       UVH_SI_ALIAS1_OVERLAY_CONFIG                        */
-/* ========================================================================= */
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL
-
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias1_overlay_config_u {
-    unsigned long	v;
-    struct uvh_si_alias1_overlay_config_s {
-	unsigned long	rsvd_0_23: 24;  /*    */
-	unsigned long	base    :  8;  /* RW */
-	unsigned long	rsvd_32_47: 16;  /*    */
-	unsigned long	m_alias :  5;  /* RW */
-	unsigned long	rsvd_53_62: 10;  /*    */
-	unsigned long	enable  :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                       UVH_SI_ALIAS2_OVERLAY_CONFIG                        */
-/* ========================================================================= */
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL
-
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias2_overlay_config_u {
-    unsigned long	v;
-    struct uvh_si_alias2_overlay_config_s {
-	unsigned long	rsvd_0_23: 24;  /*    */
-	unsigned long	base    :  8;  /* RW */
-	unsigned long	rsvd_32_47: 16;  /*    */
-	unsigned long	m_alias :  5;  /* RW */
-	unsigned long	rsvd_53_62: 10;  /*    */
-	unsigned long	enable  :  1;  /* RW */
-    } s;
-};
-
-
-#endif /* _ASM_X86_UV_UV_MMRS_H */
+#endif /* __ASM_UV_MMRS_X86_H__ */
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index ed4118de249e..194539aea175 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -379,14 +379,14 @@ struct redir_addr {
 #define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
 
 static __initdata struct redir_addr redir_addrs[] = {
-	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG},
-	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG},
-	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR},
 };
 
 static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
 {
-	union uvh_si_alias0_overlay_config_u alias;
+	union uvh_rh_gam_alias210_overlay_config_2_mmr_u alias;
 	union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect;
 	int i;
 
@@ -660,7 +660,7 @@ void uv_nmi_init(void)
 
 void __init uv_system_init(void)
 {
-	union uvh_si_addr_map_config_u m_n_config;
+	union uvh_rh_gam_config_mmr_u  m_n_config;
 	union uvh_node_id_u node_id;
 	unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
 	int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
@@ -670,7 +670,7 @@ void __init uv_system_init(void)
 
 	map_low_mmrs();
 
-	m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+	m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR );
 	m_val = m_n_config.s.m_skt;
 	n_val = m_n_config.s.n_skt;
 	mmr_base =

From bea278278f0bb9af3ce6234acece9772d401a252 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 10 Nov 2010 18:07:43 +0900
Subject: [PATCH 0378/1066] MAINTAINERS: update the sh git tree entry.

Reflect the recent tree restructuring.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0094224ca79b..39267ace999f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5705,7 +5705,7 @@ M:	Paul Mundt <lethal@linux-sh.org>
 L:	linux-sh@vger.kernel.org
 W:	http://www.linux-sh.org
 Q:	http://patchwork.kernel.org/project/linux-sh/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git sh-latest
 S:	Supported
 F:	Documentation/sh/
 F:	arch/sh/

From 2f62bf7d238f6dfa39faf24c746d0b8dd60f85c5 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Thu, 4 Nov 2010 15:23:58 +0000
Subject: [PATCH 0379/1066] x86: Adjust section annotations in AMD Fam10 MMCONF
 enabling code

check_enable_amd_mmconf_dmi() gets called only for the BSP,
hence everything hanging off of it can be __init*.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CD2DE1E0200007800020990@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/mmconf-fam10h_64.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c
index 71825806cd44..6da143c2a6b8 100644
--- a/arch/x86/kernel/mmconf-fam10h_64.c
+++ b/arch/x86/kernel/mmconf-fam10h_64.c
@@ -217,13 +217,13 @@ void __cpuinit fam10h_check_enable_mmcfg(void)
 	wrmsrl(address, val);
 }
 
-static int __devinit set_check_enable_amd_mmconf(const struct dmi_system_id *d)
+static int __init set_check_enable_amd_mmconf(const struct dmi_system_id *d)
 {
         pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
         return 0;
 }
 
-static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = {
+static const struct dmi_system_id __initconst mmconf_dmi_table[] = {
         {
                 .callback = set_check_enable_amd_mmconf,
                 .ident = "Sun Microsystems Machine",
@@ -234,7 +234,8 @@ static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = {
 	{}
 };
 
-void __cpuinit check_enable_amd_mmconf_dmi(void)
+/* Called from a __cpuinit function, but only on the BSP. */
+void __ref check_enable_amd_mmconf_dmi(void)
 {
 	dmi_check_system(mmconf_dmi_table);
 }

From d22c0e5088912a9f05760c597e34876f58d1cee6 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 10 Nov 2010 18:09:14 +0900
Subject: [PATCH 0380/1066] MAINTAINERS: update the ARM SH-Mobile git tree
 entry.

Reflect the recent tree restructuring.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0094224ca79b..f5ec964865c7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -945,7 +945,7 @@ M:	Magnus Damm <magnus.damm@gmail.com>
 L:	linux-sh@vger.kernel.org
 W:	http://oss.renesas.com
 Q:	http://patchwork.kernel.org/project/linux-sh/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git rmobile-latest
 S:	Supported
 F:	arch/arm/mach-shmobile/
 F:	drivers/sh/

From 2a8dcbd6cd2270f912ca141547d9296ce08abe4a Mon Sep 17 00:00:00 2001
From: Jesper Juhl <jj@chaosbits.net>
Date: Sun, 7 Nov 2010 22:57:18 +0100
Subject: [PATCH 0381/1066] x86, apic: Remove double #include

Remove the second <asm/atomic.h> inclusion.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
LKML-Reference: <alpine.LNX.2.00.1011072253360.26247@swampdragon.chaosbits.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/apic.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 850657d1b0ed..3f838d537392 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -52,7 +52,6 @@
 #include <asm/mce.h>
 #include <asm/kvm_para.h>
 #include <asm/tsc.h>
-#include <asm/atomic.h>
 
 unsigned int num_processors;
 

From 1f523bf36734375dd6e986c9f47f010d00a8caca Mon Sep 17 00:00:00 2001
From: Kusanagi Kouichi <slash@ac.auone-net.jp>
Date: Fri, 5 Nov 2010 20:04:42 +0900
Subject: [PATCH 0382/1066] x86, pvclock: Remove leftover scale_delta()
 function

Commit 92580d64e16402762e2acc3022f065397c780425
("x86: pvclock: Move scale_delta into common header")
forgot to remove scale_delta.

Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Cc: Zachary Amsden <zamsden@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Glauber Costa <glommer@redhat.com>
LKML-Reference: <20101105110444.BAF6D6FC03B@msa105.auone-net.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/pvclock.c | 38 --------------------------------------
 1 file changed, 38 deletions(-)

diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index bab3b9e6f66d..008b91eefa18 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -41,44 +41,6 @@ void pvclock_set_flags(u8 flags)
 	valid_flags = flags;
 }
 
-/*
- * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
- * yielding a 64-bit result.
- */
-static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
-{
-	u64 product;
-#ifdef __i386__
-	u32 tmp1, tmp2;
-#endif
-
-	if (shift < 0)
-		delta >>= -shift;
-	else
-		delta <<= shift;
-
-#ifdef __i386__
-	__asm__ (
-		"mul  %5       ; "
-		"mov  %4,%%eax ; "
-		"mov  %%edx,%4 ; "
-		"mul  %5       ; "
-		"xor  %5,%5    ; "
-		"add  %4,%%eax ; "
-		"adc  %5,%%edx ; "
-		: "=A" (product), "=r" (tmp1), "=r" (tmp2)
-		: "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
-#elif defined(__x86_64__)
-	__asm__ (
-		"mul %%rdx ; shrd $32,%%rdx,%%rax"
-		: "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
-#else
-#error implement me!
-#endif
-
-	return product;
-}
-
 static u64 pvclock_get_nsec_offset(struct pvclock_shadow_time *shadow)
 {
 	u64 delta = native_read_tsc() - shadow->tsc_timestamp;

From 32ed3036c56284a720c0c00d92ee14bf609f497d Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Wed, 10 Nov 2010 13:04:19 +0200
Subject: [PATCH 0383/1066] sisfb: limit POST memory test according to PCI
 resource length

If the POST memory test fails, the driver may access illegal
memory areas. Instead of hard coding the maximum size, set it
according to the PCI resource length (an additional check is needed in
sisfb_post_map_vram() to ensure it's big enough). DRAM sizing will later
adjust video_size to the correct value.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sis/sis_main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index b52f8e4ef1fd..3dde12b0ab06 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -4181,6 +4181,9 @@ static void __devinit
 sisfb_post_map_vram(struct sis_video_info *ivideo, unsigned int *mapsize,
 			unsigned int min)
 {
+	if (*mapsize < (min << 20))
+		return;
+
 	ivideo->video_vbase = ioremap(ivideo->video_base, (*mapsize));
 
 	if(!ivideo->video_vbase) {
@@ -4514,7 +4517,7 @@ sisfb_post_sis300(struct pci_dev *pdev)
 	} else {
 #endif
 		/* Need to map max FB size for finding out about RAM size */
-		mapsize = 64 << 20;
+		mapsize = ivideo->video_size;
 		sisfb_post_map_vram(ivideo, &mapsize, 4);
 
 		if(ivideo->video_vbase) {
@@ -4680,7 +4683,7 @@ sisfb_post_xgi_ramsize(struct sis_video_info *ivideo)
 	orSISIDXREG(SISSR, 0x20, (0x80 | 0x04));
 
 	/* Need to map max FB size for finding out about RAM size */
-	mapsize = 256 << 20;
+	mapsize = ivideo->video_size;
 	sisfb_post_map_vram(ivideo, &mapsize, 32);
 
 	if(!ivideo->video_vbase) {
@@ -5936,6 +5939,7 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	ivideo->video_base = pci_resource_start(pdev, 0);
+	ivideo->video_size = pci_resource_len(pdev, 0);
 	ivideo->mmio_base  = pci_resource_start(pdev, 1);
 	ivideo->mmio_size  = pci_resource_len(pdev, 1);
 	ivideo->SiS_Pr.RelIO = pci_resource_start(pdev, 2) + 0x30;

From 108409a8a4e325db38f27258da68d7207a0ad433 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Date: Wed, 10 Nov 2010 11:45:18 +0200
Subject: [PATCH 0384/1066] OMAP: VRAM: improve VRAM error prints

Improve the error prints to give more information about the offending
address & size.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/omap2/vram.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c
index fed2a72bc6b6..bb5ee0663e65 100644
--- a/drivers/video/omap2/vram.c
+++ b/drivers/video/omap2/vram.c
@@ -554,9 +554,15 @@ void __init omap_vram_reserve_sdram_memblock(void)
 	size = PAGE_ALIGN(size);
 
 	if (paddr) {
-		if ((paddr & ~PAGE_MASK) ||
-		    !memblock_is_region_memory(paddr, size)) {
-			pr_err("Illegal SDRAM region for VRAM\n");
+		if (paddr & ~PAGE_MASK) {
+			pr_err("VRAM start address 0x%08x not page aligned\n",
+					paddr);
+			return;
+		}
+
+		if (!memblock_is_region_memory(paddr, size)) {
+			pr_err("Illegal SDRAM region 0x%08x..0x%08x for VRAM\n",
+					paddr, paddr + size - 1);
 			return;
 		}
 

From 88abf44d3d8d4fefcbf3d57584d471e38cb51627 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Date: Wed, 10 Nov 2010 11:45:19 +0200
Subject: [PATCH 0385/1066] OMAP: VRAM: Fix boot-time memory allocation

Use memblock_free() and memblock_remove() to remove the allocated or
reserved VRAM area from normal kernel memory.

This is a slightly modified version of patches from Felipe Contreras and
Namhyung Kim.

Reported-by: Felipe Contreras <felipe.contreras@gmail.com>
Reported-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/omap2/vram.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c
index bb5ee0663e65..2fd7e5271be9 100644
--- a/drivers/video/omap2/vram.c
+++ b/drivers/video/omap2/vram.c
@@ -576,9 +576,12 @@ void __init omap_vram_reserve_sdram_memblock(void)
 			return;
 		}
 	} else {
-		paddr = memblock_alloc_base(size, PAGE_SIZE, MEMBLOCK_REAL_LIMIT);
+		paddr = memblock_alloc(size, PAGE_SIZE);
 	}
 
+	memblock_free(paddr, size);
+	memblock_remove(paddr, size);
+
 	omap_vram_add_region(paddr, size);
 
 	pr_info("Reserving %u bytes SDRAM for VRAM\n", size);

From 0bf3d5a0fb569b13fc5a05f7d5a240d2db70ac61 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Date: Wed, 10 Nov 2010 11:45:20 +0200
Subject: [PATCH 0386/1066] OMAP: DSS: Fix documentation regarding 'vram'
 kernel parameter

The DSS documentation didn't mention the option to give the VRAM start
address.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 Documentation/arm/OMAP/DSS | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS
index 0af0e9eed5d6..888ae7b83ae4 100644
--- a/Documentation/arm/OMAP/DSS
+++ b/Documentation/arm/OMAP/DSS
@@ -255,9 +255,10 @@ framebuffer parameters.
 Kernel boot arguments
 ---------------------
 
-vram=<size>
-	- Amount of total VRAM to preallocate. For example, "10M". omapfb
-	  allocates memory for framebuffers from VRAM.
+vram=<size>[,<physaddr>]
+	- Amount of total VRAM to preallocate and optionally a physical start
+	  memory address. For example, "10M". omapfb allocates memory for
+	  framebuffers from VRAM.
 
 omapfb.mode=<display>:<mode>[,...]
 	- Default video mode for specified displays. For example,

From c0deae8c9587419ab13874b74425ce2eb2e18508 Mon Sep 17 00:00:00 2001
From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Date: Wed, 3 Nov 2010 18:52:56 +0200
Subject: [PATCH 0387/1066] posix-cpu-timers: Rcu_read_lock/unlock protect
 find_task_by_vpid call

Commit 4221a9918e38b7494cee341dda7b7b4bb8c04bde "Add RCU check for
find_task_by_vpid()" introduced rcu_lockdep_assert to find_task_by_pid_ns.
Add rcu_read_lock/rcu_read_unlock to call find_task_by_vpid.

Tetsuo Handa wrote:
| Quoting from one of posts in that thead
| http://kerneltrap.org/mailarchive/linux-kernel/2010/2/8/4536388
|
|| Usually tasklist gives enough protection, but if copy_process() fails
|| it calls free_pid() lockless and does call_rcu(delayed_put_pid().
|| This means, without rcu lock find_pid_ns() can't scan the hash table
|| safely.

Thomas Gleixner wrote:
| We can remove the tasklist_lock while at it. rcu_read_lock is enough.

Patch also replaces thread_group_leader with has_group_leader_pid
in accordance to comment by Oleg Nesterov:

| ... thread_group_leader() check is not relaible without
| tasklist. If we race with de_thread() find_task_by_vpid() can find
| the new leader before it updates its ->group_leader.
|
| perhaps it makes sense to change posix_cpu_timer_create() to use
| has_group_leader_pid() instead, just to make this code not look racy
| and avoid adding new problems.


Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
LKML-Reference: <20101103165256.GD30053@swordfish.minsk.epam.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/posix-cpu-timers.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 6842eeba5879..05bb7173850e 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -37,13 +37,13 @@ static int check_clock(const clockid_t which_clock)
 	if (pid == 0)
 		return 0;
 
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 	p = find_task_by_vpid(pid);
 	if (!p || !(CPUCLOCK_PERTHREAD(which_clock) ?
-		   same_thread_group(p, current) : thread_group_leader(p))) {
+		   same_thread_group(p, current) : has_group_leader_pid(p))) {
 		error = -EINVAL;
 	}
-	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
 
 	return error;
 }
@@ -390,7 +390,7 @@ int posix_cpu_timer_create(struct k_itimer *new_timer)
 
 	INIT_LIST_HEAD(&new_timer->it.cpu.entry);
 
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 	if (CPUCLOCK_PERTHREAD(new_timer->it_clock)) {
 		if (pid == 0) {
 			p = current;
@@ -404,7 +404,7 @@ int posix_cpu_timer_create(struct k_itimer *new_timer)
 			p = current->group_leader;
 		} else {
 			p = find_task_by_vpid(pid);
-			if (p && !thread_group_leader(p))
+			if (p && !has_group_leader_pid(p))
 				p = NULL;
 		}
 	}
@@ -414,7 +414,7 @@ int posix_cpu_timer_create(struct k_itimer *new_timer)
 	} else {
 		ret = -EINVAL;
 	}
-	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
 
 	return ret;
 }

From 4c115e951d80aff126468adaec7a6c7854f61ab8 Mon Sep 17 00:00:00 2001
From: Darren Hart <dvhart@linux.intel.com>
Date: Thu, 4 Nov 2010 15:00:00 -0400
Subject: [PATCH 0388/1066] futex: Address compiler warnings in
 exit_robust_list
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Since commit 1dcc41bb (futex: Change 3rd arg of fetch_robust_entry()
to unsigned int*) some gcc versions decided to emit the following
warning:

kernel/futex.c: In function ‘exit_robust_list’:
kernel/futex.c:2492: warning: ‘next_pi’ may be used uninitialized in this function

The commit did not introduce the warning as gcc should have warned
before that commit as well. It's just gcc being silly.

The code path really can't result in next_pi being unitialized (or
should not), but let's keep the build clean. Annotate next_pi as an
uninitialized_var.

[ tglx: Addressed the same issue in futex_compat.c and massaged the
  	changelog ]

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Tested-by: Matt Fleming <matt@console-pimps.org>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1288897200-13008-1-git-send-email-dvhart@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/futex.c        | 3 ++-
 kernel/futex_compat.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/kernel/futex.c b/kernel/futex.c
index 6c683b37f2ce..40a8777a27d0 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -2489,7 +2489,8 @@ void exit_robust_list(struct task_struct *curr)
 {
 	struct robust_list_head __user *head = curr->robust_list;
 	struct robust_list __user *entry, *next_entry, *pending;
-	unsigned int limit = ROBUST_LIST_LIMIT, pi, next_pi, pip;
+	unsigned int limit = ROBUST_LIST_LIMIT, pi, pip;
+	unsigned int uninitialized_var(next_pi);
 	unsigned long futex_offset;
 	int rc;
 
diff --git a/kernel/futex_compat.c b/kernel/futex_compat.c
index 06da4dfc339b..a7934ac75e5b 100644
--- a/kernel/futex_compat.c
+++ b/kernel/futex_compat.c
@@ -49,7 +49,8 @@ void compat_exit_robust_list(struct task_struct *curr)
 {
 	struct compat_robust_list_head __user *head = curr->compat_robust_list;
 	struct robust_list __user *entry, *next_entry, *pending;
-	unsigned int limit = ROBUST_LIST_LIMIT, pi, next_pi, pip;
+	unsigned int limit = ROBUST_LIST_LIMIT, pi, pip;
+	unsigned int uninitialized_var(next_pi);
 	compat_uptr_t uentry, next_uentry, upending;
 	compat_long_t futex_offset;
 	int rc;

From 006839f12e9dc484a6227b263843f987abb709a4 Mon Sep 17 00:00:00 2001
From: Komuro <komurojun-mbn@nifty.com>
Date: Sat, 23 Oct 2010 07:02:05 +0900
Subject: [PATCH 0389/1066] pd6729: Coding Style fixes

pd6729: remove unnecessary space.

Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/pcmcia/pd6729.c | 8 ++++----
 drivers/pcmcia/pd6729.h | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 8cbfa067171f..96c72e90b79c 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -725,17 +725,17 @@ static int __devinit pd6729_pci_probe(struct pci_dev *dev,
 
 	return 0;
 
- err_out_free_res2:
+err_out_free_res2:
 	if (irq_mode == 1)
 		free_irq(dev->irq, socket);
 	else
 		del_timer_sync(&socket->poll_timer);
- err_out_free_res:
+err_out_free_res:
 	pci_release_regions(dev);
- err_out_disable:
+err_out_disable:
 	pci_disable_device(dev);
 
- err_out_free_mem:
+err_out_free_mem:
 	kfree(socket);
 	return ret;
 }
diff --git a/drivers/pcmcia/pd6729.h b/drivers/pcmcia/pd6729.h
index 41418d394c55..c8e84bdece38 100644
--- a/drivers/pcmcia/pd6729.h
+++ b/drivers/pcmcia/pd6729.h
@@ -15,7 +15,7 @@
 struct pd6729_socket {
 	int	number;
 	int	card_irq;
-	unsigned long io_base; 	/* base io address of the socket */
+	unsigned long io_base;	/* base io address of the socket */
 	struct pcmcia_socket socket;
 	struct timer_list poll_timer;
 };

From 20fffee818ec43b64f58ab25c42705b7dcae16e5 Mon Sep 17 00:00:00 2001
From: Nicolas Kaiser <nikai@nikai.net>
Date: Fri, 22 Oct 2010 18:10:24 +0200
Subject: [PATCH 0390/1066] pcmcia/cm4000: fix error code

I'm assuming it's not intended to instantly change the error code
from -ENODEV to -EIO, is it?

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Acked-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/char/pcmcia/cm4000_cs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index d962f25dcc2a..777181a2e603 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -979,8 +979,9 @@ static ssize_t cmm_read(struct file *filp, __user char *buf, size_t count,
 		if (dev->flags0 & 1) {
 			set_bit(IS_CMM_ABSENT, &dev->flags);
 			rc = -ENODEV;
+		} else {
+			rc = -EIO;
 		}
-		rc = -EIO;
 		goto release_io;
 	}
 

From 5b85e04e93f9a2963e88156cae8629ee72efd890 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 4 Nov 2010 10:46:14 +0100
Subject: [PATCH 0391/1066] pcmcia/sa1100: don't put machine specific init
 functions in .init.text
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

These are called by sa11x0_drv_pcmcia_probe (which is marked now with
__devinit) so they can go to .devinit.text now, too.

This fixes:

	WARNING: drivers/pcmcia/sa1100_cs.o(.text+0x10): Section mismatch in reference from the function sa11x0_drv_pcmcia_probe() to the function .init.text:pcmcia_simpad_init()
	The function sa11x0_drv_pcmcia_probe() references
	the function __init pcmcia_simpad_init().
	This is often because sa11x0_drv_pcmcia_probe lacks a __init
	annotation or the annotation of pcmcia_simpad_init is wrong.

and a similar warning for pcmcia_collie_init, pcmcia_cerf_init,
pcmcia_h3600_init and pcmcia_shannon_init.

While at it mark pcmcia_assabet_init with __devinit, too.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
CC: Russell King <linux@arm.linux.org.uk>
CC: Eric Miao <eric.y.miao@gmail.com>
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/pcmcia/pxa2xx_sharpsl.c | 2 +-
 drivers/pcmcia/sa1100_assabet.c | 2 +-
 drivers/pcmcia/sa1100_cerf.c    | 2 +-
 drivers/pcmcia/sa1100_generic.c | 2 +-
 drivers/pcmcia/sa1100_h3600.c   | 2 +-
 drivers/pcmcia/sa1100_shannon.c | 2 +-
 drivers/pcmcia/sa1100_simpad.c  | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index 0ea3b29440e6..81af2b3bcc00 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -237,7 +237,7 @@ static struct pcmcia_low_level sharpsl_pcmcia_ops __initdata = {
 #ifdef CONFIG_SA1100_COLLIE
 #include "sa11xx_base.h"
 
-int __init pcmcia_collie_init(struct device *dev)
+int __devinit pcmcia_collie_init(struct device *dev)
 {
        int ret = -ENODEV;
 
diff --git a/drivers/pcmcia/sa1100_assabet.c b/drivers/pcmcia/sa1100_assabet.c
index fd013a1ef47a..f1e882272ab0 100644
--- a/drivers/pcmcia/sa1100_assabet.c
+++ b/drivers/pcmcia/sa1100_assabet.c
@@ -130,7 +130,7 @@ static struct pcmcia_low_level assabet_pcmcia_ops = {
 	.socket_suspend		= assabet_pcmcia_socket_suspend,
 };
 
-int pcmcia_assabet_init(struct device *dev)
+int __devinit pcmcia_assabet_init(struct device *dev)
 {
 	int ret = -ENODEV;
 
diff --git a/drivers/pcmcia/sa1100_cerf.c b/drivers/pcmcia/sa1100_cerf.c
index 9bf088b17275..30560df8c76b 100644
--- a/drivers/pcmcia/sa1100_cerf.c
+++ b/drivers/pcmcia/sa1100_cerf.c
@@ -97,7 +97,7 @@ static struct pcmcia_low_level cerf_pcmcia_ops = {
 	.socket_suspend		= cerf_pcmcia_socket_suspend,
 };
 
-int __init pcmcia_cerf_init(struct device *dev)
+int __devinit pcmcia_cerf_init(struct device *dev)
 {
 	int ret = -ENODEV;
 
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index 945857f8c284..6b228590b3fd 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -64,7 +64,7 @@ static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = {
 #endif
 };
 
-static int sa11x0_drv_pcmcia_probe(struct platform_device *dev)
+static int __devinit sa11x0_drv_pcmcia_probe(struct platform_device *dev)
 {
 	int i, ret = -ENODEV;
 
diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c
index 56329ad575a9..edf8f0028898 100644
--- a/drivers/pcmcia/sa1100_h3600.c
+++ b/drivers/pcmcia/sa1100_h3600.c
@@ -219,7 +219,7 @@ struct pcmcia_low_level h3600_pcmcia_ops = {
 	.socket_suspend		= h3600_pcmcia_socket_suspend,
 };
 
-int __init pcmcia_h3600_init(struct device *dev)
+int __devinit pcmcia_h3600_init(struct device *dev)
 {
 	int ret = -ENODEV;
 
diff --git a/drivers/pcmcia/sa1100_shannon.c b/drivers/pcmcia/sa1100_shannon.c
index c4d51867a050..7ff1b43540b8 100644
--- a/drivers/pcmcia/sa1100_shannon.c
+++ b/drivers/pcmcia/sa1100_shannon.c
@@ -113,7 +113,7 @@ static struct pcmcia_low_level shannon_pcmcia_ops = {
 	.socket_suspend		= shannon_pcmcia_socket_suspend,
 };
 
-int __init pcmcia_shannon_init(struct device *dev)
+int __devinit pcmcia_shannon_init(struct device *dev)
 {
 	int ret = -ENODEV;
 
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
index 05bd504e6f18..c998f7aaadbc 100644
--- a/drivers/pcmcia/sa1100_simpad.c
+++ b/drivers/pcmcia/sa1100_simpad.c
@@ -123,7 +123,7 @@ static struct pcmcia_low_level simpad_pcmcia_ops = {
 	.socket_suspend		= simpad_pcmcia_socket_suspend,
 };
 
-int __init pcmcia_simpad_init(struct device *dev)
+int __devinit pcmcia_simpad_init(struct device *dev)
 {
 	int ret = -ENODEV;
 

From 86f94e3a1583765476ec06131c755af8318e6470 Mon Sep 17 00:00:00 2001
From: Andres Salomon <dilinger@queued.net>
Date: Mon, 8 Nov 2010 15:58:01 -0800
Subject: [PATCH 0392/1066] pcmcia: fix warning in synclink driver
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

During builds I see the following warning -

  CC [M]  drivers/char/pcmcia/synclink_cs.o
drivers/char/pcmcia/synclink_cs.c:2194: warning: ‘mgslpc_get_icount’ defined but not used

The function is a callback meant to be assigned to get_icount (added during 0587102cf).
Fix accordingly.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/char/pcmcia/synclink_cs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index bfc10f89d951..eaa41992fbe2 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -2796,6 +2796,7 @@ static const struct tty_operations mgslpc_ops = {
 	.hangup = mgslpc_hangup,
 	.tiocmget = tiocmget,
 	.tiocmset = tiocmset,
+	.get_icount = mgslpc_get_icount,
 	.proc_fops = &mgslpc_proc_fops,
 };
 

From 106665d937df6eff33c71997a52f7bc3aefa6c12 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 9 Nov 2010 17:14:01 -0800
Subject: [PATCH 0393/1066] drivers/pcmcia/soc_common.c: Use printf extension
 %pV

Using %pV reduces the number of printk calls and
eliminates any possible message interleaving from
other printk calls.

Signed-off-by: Joe Perches <joe@perches.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Eric Miao <eric.y.miao@gmail.com>
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/pcmcia/soc_common.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 689e3c02edb8..3753fd0722e7 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -57,11 +57,16 @@ module_param(pc_debug, int, 0644);
 void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func,
 		      int lvl, const char *fmt, ...)
 {
+	struct va_format vaf;
 	va_list args;
 	if (pc_debug > lvl) {
-		printk(KERN_DEBUG "skt%u: %s: ", skt->nr, func);
 		va_start(args, fmt);
-		vprintk(fmt, args);
+
+		vaf.fmt = fmt;
+		vaf.va = &args;
+
+		printk(KERN_DEBUG "skt%u: %s: %pV", skt->nr, func, &vaf);
+
 		va_end(args);
 	}
 }

From 9284bcf4e335e5f18a8bc7b26461c33ab60d0689 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Fri, 29 Oct 2010 08:10:18 -0600
Subject: [PATCH 0394/1066] block: check for proper length of iov entries in
 blk_rq_map_user_iov()

Ensure that we pass down properly validated iov segments before
calling into the mapping or copy functions.

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/blk-map.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/block/blk-map.c b/block/blk-map.c
index d4a586d8691e..5d5dbe47c228 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -205,6 +205,8 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq,
 			unaligned = 1;
 			break;
 		}
+		if (!iov[i].iov_len)
+			return -EINVAL;
 	}
 
 	if (unaligned || (q->dma_pad_mask & len) || map_data)

From 9f864c80913467312c7b8690e41fb5ebd1b50e92 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Fri, 29 Oct 2010 11:31:42 -0600
Subject: [PATCH 0395/1066] block: take care not to overflow when calculating
 total iov length

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/scsi_ioctl.c | 34 ++++++++++++++++++++++++----------
 1 file changed, 24 insertions(+), 10 deletions(-)

diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index a8b5a10eb5b0..4f4230b79bb6 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -321,33 +321,47 @@ static int sg_io(struct request_queue *q, struct gendisk *bd_disk,
 	if (hdr->iovec_count) {
 		const int size = sizeof(struct sg_iovec) * hdr->iovec_count;
 		size_t iov_data_len;
-		struct sg_iovec *iov;
+		struct sg_iovec *sg_iov;
+		struct iovec *iov;
+		int i;
 
-		iov = kmalloc(size, GFP_KERNEL);
-		if (!iov) {
+		sg_iov = kmalloc(size, GFP_KERNEL);
+		if (!sg_iov) {
 			ret = -ENOMEM;
 			goto out;
 		}
 
-		if (copy_from_user(iov, hdr->dxferp, size)) {
-			kfree(iov);
+		if (copy_from_user(sg_iov, hdr->dxferp, size)) {
+			kfree(sg_iov);
 			ret = -EFAULT;
 			goto out;
 		}
 
+		/*
+		 * Sum up the vecs, making sure they don't overflow
+		 */
+		iov = (struct iovec *) sg_iov;
+		iov_data_len = 0;
+		for (i = 0; i < hdr->iovec_count; i++) {
+			if (iov_data_len + iov[i].iov_len < iov_data_len) {
+				kfree(sg_iov);
+				ret = -EINVAL;
+				goto out;
+			}
+			iov_data_len += iov[i].iov_len;
+		}
+
 		/* SG_IO howto says that the shorter of the two wins */
-		iov_data_len = iov_length((struct iovec *)iov,
-					  hdr->iovec_count);
 		if (hdr->dxfer_len < iov_data_len) {
-			hdr->iovec_count = iov_shorten((struct iovec *)iov,
+			hdr->iovec_count = iov_shorten(iov,
 						       hdr->iovec_count,
 						       hdr->dxfer_len);
 			iov_data_len = hdr->dxfer_len;
 		}
 
-		ret = blk_rq_map_user_iov(q, rq, NULL, iov, hdr->iovec_count,
+		ret = blk_rq_map_user_iov(q, rq, NULL, sg_iov, hdr->iovec_count,
 					  iov_data_len, GFP_KERNEL);
-		kfree(iov);
+		kfree(sg_iov);
 	} else if (hdr->dxfer_len)
 		ret = blk_rq_map_user(q, rq, NULL, hdr->dxferp, hdr->dxfer_len,
 				      GFP_KERNEL);

From f3f63c1c28bc861a931fac283b5bc3585efb8967 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Fri, 29 Oct 2010 11:46:56 -0600
Subject: [PATCH 0396/1066] block: limit vec count in bio_kmalloc() and
 bio_alloc_map_data()

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 fs/bio.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/fs/bio.c b/fs/bio.c
index 8abb2dfb2e7c..8317a2c106bc 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -370,6 +370,9 @@ struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs)
 {
 	struct bio *bio;
 
+	if (nr_iovecs > UIO_MAXIOV)
+		return NULL;
+
 	bio = kmalloc(sizeof(struct bio) + nr_iovecs * sizeof(struct bio_vec),
 		      gfp_mask);
 	if (unlikely(!bio))
@@ -697,8 +700,12 @@ static void bio_free_map_data(struct bio_map_data *bmd)
 static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count,
 					       gfp_t gfp_mask)
 {
-	struct bio_map_data *bmd = kmalloc(sizeof(*bmd), gfp_mask);
+	struct bio_map_data *bmd;
 
+	if (iov_count > UIO_MAXIOV)
+		return NULL;
+
+	bmd = kmalloc(sizeof(*bmd), gfp_mask);
 	if (!bmd)
 		return NULL;
 

From cb4644cac4a2797afc847e6c92736664d4b0ea34 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Wed, 10 Nov 2010 14:36:25 +0100
Subject: [PATCH 0397/1066] bio: take care not overflow page count when
 mapping/copying user data

If the iovec is being set up in a way that causes uaddr + PAGE_SIZE
to overflow, we could end up attempting to map a huge number of
pages. Check for this invalid input type.

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 fs/bio.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/fs/bio.c b/fs/bio.c
index 8317a2c106bc..4bd454fa844e 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -834,6 +834,12 @@ struct bio *bio_copy_user_iov(struct request_queue *q,
 		end = (uaddr + iov[i].iov_len + PAGE_SIZE - 1) >> PAGE_SHIFT;
 		start = uaddr >> PAGE_SHIFT;
 
+		/*
+		 * Overflow, abort
+		 */
+		if (end < start)
+			return ERR_PTR(-EINVAL);
+
 		nr_pages += end - start;
 		len += iov[i].iov_len;
 	}
@@ -962,6 +968,12 @@ static struct bio *__bio_map_user_iov(struct request_queue *q,
 		unsigned long end = (uaddr + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
 		unsigned long start = uaddr >> PAGE_SHIFT;
 
+		/*
+		 * Overflow, abort
+		 */
+		if (end < start)
+			return ERR_PTR(-EINVAL);
+
 		nr_pages += end - start;
 		/*
 		 * buffer must be aligned to at least hardsector size for now
@@ -989,7 +1001,7 @@ static struct bio *__bio_map_user_iov(struct request_queue *q,
 		unsigned long start = uaddr >> PAGE_SHIFT;
 		const int local_nr_pages = end - start;
 		const int page_limit = cur_page + local_nr_pages;
-		
+
 		ret = get_user_pages_fast(uaddr, local_nr_pages,
 				write_to_vm, &pages[cur_page]);
 		if (ret < local_nr_pages) {

From 90fdb0b98a62d78a0650b9fd3ddc58a48f71d740 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Mon, 8 Nov 2010 14:29:13 +0100
Subject: [PATCH 0398/1066] cciss: fix proc warning on attempt to remove
 non-existant directory

Randy reports that he gets the following stack trace when
removing the cciss module:

[  109.164277] Pid: 3463, comm: rmmod Not tainted 2.6.37-rc1 #7
[  109.164280] Call Trace:
[  109.164292]  [<ffffffff8107eb8d>] warn_slowpath_common+0xc6/0xf3
[  109.164299]  [<ffffffff8107ecaa>] warn_slowpath_fmt+0x5b/0x6b
[  109.164307]  [<ffffffff8155175b>] ? _raw_spin_unlock+0x40/0x4b
[  109.164313]  [<ffffffff8123dd1e>] remove_proc_entry+0x156/0x35e
[  109.164320]  [<ffffffff812cd91b>] ? do_raw_spin_unlock+0xff/0x10f
[  109.164327]  [<ffffffff8113823d>] ? trace_hardirqs_on+0x10/0x4a
[  109.164333]  [<ffffffff8155162d>] ? _raw_spin_unlock_irq+0x4c/0x7b
[  109.164339]  [<ffffffff8154d4d1>] ? wait_for_common+0x145/0x15e
[  109.164345]  [<ffffffff81075337>] ? default_wake_function+0x0/0x22
[  109.164357]  [<ffffffffa0615a8f>] cciss_cleanup+0xa9/0xc7 [cciss]
[  109.164365]  [<ffffffff810d3cb0>] sys_delete_module+0x2d6/0x368
[  109.164371]  [<ffffffff8155036b>] ? lockdep_sys_exit_thunk+0x35/0x67
[  109.164377]  [<ffffffff810fdfaf>] ? audit_syscall_entry+0x172/0x1a5
[  109.164383]  [<ffffffff815502f5>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  109.164389]  [<ffffffff8100ea72>] system_call_fastpath+0x16/0x1b
[  109.164394] ---[ end trace 88e8568246ed0b1d ]---

which will happen if you don't actually have an HP CISS adapter,
since it'll do an uncondional removal of a proc directory it
never attempted to create in that case.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 drivers/block/cciss.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 2cc4dda46279..2cdbc247d0ac 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4936,7 +4936,8 @@ static void __exit cciss_cleanup(void)
 		}
 	}
 	kthread_stop(cciss_scan_thread);
-	remove_proc_entry("driver/cciss", NULL);
+	if (proc_cciss)
+		remove_proc_entry("driver/cciss", NULL);
 	bus_unregister(&cciss_bus_type);
 }
 

From 77304d2abac6101f7249754ffdd4421258877ab0 Mon Sep 17 00:00:00 2001
From: Mike Snitzer <snitzer@redhat.com>
Date: Mon, 8 Nov 2010 14:39:12 +0100
Subject: [PATCH 0399/1066] block: read i_size with i_size_read()

Convert direct reads of an inode's i_size to using i_size_read().

i_size_{read,write} use a seqcount to protect reads from accessing
incomple writes.  Concurrent i_size_write()s require mutual exclussion
to protect the seqcount that is used by i_size_{read,write}.  But
i_size_read() callers do not need to use additional locking.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: NeilBrown <neilb@suse.de>
Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/blk-core.c              |  4 ++--
 block/compat_ioctl.c          |  4 ++--
 block/ioctl.c                 |  6 +++---
 drivers/block/drbd/drbd_int.h |  2 +-
 drivers/md/md.c               | 20 ++++++++++----------
 5 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index f0834e2f5727..17fcb83670c0 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1351,7 +1351,7 @@ static void handle_bad_sector(struct bio *bio)
 			bdevname(bio->bi_bdev, b),
 			bio->bi_rw,
 			(unsigned long long)bio->bi_sector + bio_sectors(bio),
-			(long long)(bio->bi_bdev->bd_inode->i_size >> 9));
+			(long long)(i_size_read(bio->bi_bdev->bd_inode) >> 9));
 
 	set_bit(BIO_EOF, &bio->bi_flags);
 }
@@ -1404,7 +1404,7 @@ static inline int bio_check_eod(struct bio *bio, unsigned int nr_sectors)
 		return 0;
 
 	/* Test device or partition size, when known. */
-	maxsector = bio->bi_bdev->bd_inode->i_size >> 9;
+	maxsector = i_size_read(bio->bi_bdev->bd_inode) >> 9;
 	if (maxsector) {
 		sector_t sector = bio->bi_sector;
 
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index 119f07b74dc0..58c6ee5b010c 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -744,13 +744,13 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 		bdi->ra_pages = (arg * 512) / PAGE_CACHE_SIZE;
 		return 0;
 	case BLKGETSIZE:
-		size = bdev->bd_inode->i_size;
+		size = i_size_read(bdev->bd_inode);
 		if ((size >> 9) > ~0UL)
 			return -EFBIG;
 		return compat_put_ulong(arg, size >> 9);
 
 	case BLKGETSIZE64_32:
-		return compat_put_u64(arg, bdev->bd_inode->i_size);
+		return compat_put_u64(arg, i_size_read(bdev->bd_inode));
 
 	case BLKTRACESETUP32:
 	case BLKTRACESTART: /* compatible */
diff --git a/block/ioctl.c b/block/ioctl.c
index d724ceb1d465..38aa194f63ec 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -125,7 +125,7 @@ static int blk_ioctl_discard(struct block_device *bdev, uint64_t start,
 	start >>= 9;
 	len >>= 9;
 
-	if (start + len > (bdev->bd_inode->i_size >> 9))
+	if (start + len > (i_size_read(bdev->bd_inode) >> 9))
 		return -EINVAL;
 	if (secure)
 		flags |= BLKDEV_DISCARD_SECURE;
@@ -307,12 +307,12 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
 		ret = blkdev_reread_part(bdev);
 		break;
 	case BLKGETSIZE:
-		size = bdev->bd_inode->i_size;
+		size = i_size_read(bdev->bd_inode);
 		if ((size >> 9) > ~0UL)
 			return -EFBIG;
 		return put_ulong(arg, size >> 9);
 	case BLKGETSIZE64:
-		return put_u64(arg, bdev->bd_inode->i_size);
+		return put_u64(arg, i_size_read(bdev->bd_inode));
 	case BLKTRACESTART:
 	case BLKTRACESTOP:
 	case BLKTRACESETUP:
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index 9bdcf4393c0a..2637f499f77f 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -1874,7 +1874,7 @@ static inline sector_t drbd_md_last_sector(struct drbd_backing_dev *bdev)
 static inline sector_t drbd_get_capacity(struct block_device *bdev)
 {
 	/* return bdev ? get_capacity(bdev->bd_disk) : 0; */
-	return bdev ? bdev->bd_inode->i_size >> 9 : 0;
+	return bdev ? i_size_read(bdev->bd_inode) >> 9 : 0;
 }
 
 /**
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 4e957f3140a8..324a3663fcda 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -706,7 +706,7 @@ static struct mdk_personality *find_pers(int level, char *clevel)
 /* return the offset of the super block in 512byte sectors */
 static inline sector_t calc_dev_sboffset(struct block_device *bdev)
 {
-	sector_t num_sectors = bdev->bd_inode->i_size / 512;
+	sector_t num_sectors = i_size_read(bdev->bd_inode) / 512;
 	return MD_NEW_SIZE_SECTORS(num_sectors);
 }
 
@@ -1386,7 +1386,7 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version)
 	 */
 	switch(minor_version) {
 	case 0:
-		sb_start = rdev->bdev->bd_inode->i_size >> 9;
+		sb_start = i_size_read(rdev->bdev->bd_inode) >> 9;
 		sb_start -= 8*2;
 		sb_start &= ~(sector_t)(4*2-1);
 		break;
@@ -1472,7 +1472,7 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version)
 			ret = 0;
 	}
 	if (minor_version)
-		rdev->sectors = (rdev->bdev->bd_inode->i_size >> 9) -
+		rdev->sectors = (i_size_read(rdev->bdev->bd_inode) >> 9) -
 			le64_to_cpu(sb->data_offset);
 	else
 		rdev->sectors = rdev->sb_start;
@@ -1680,7 +1680,7 @@ super_1_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors)
 		return 0; /* component must fit device */
 	if (rdev->sb_start < rdev->data_offset) {
 		/* minor versions 1 and 2; superblock before data */
-		max_sectors = rdev->bdev->bd_inode->i_size >> 9;
+		max_sectors = i_size_read(rdev->bdev->bd_inode) >> 9;
 		max_sectors -= rdev->data_offset;
 		if (!num_sectors || num_sectors > max_sectors)
 			num_sectors = max_sectors;
@@ -1690,7 +1690,7 @@ super_1_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors)
 	} else {
 		/* minor version 0; superblock after data */
 		sector_t sb_start;
-		sb_start = (rdev->bdev->bd_inode->i_size >> 9) - 8*2;
+		sb_start = (i_size_read(rdev->bdev->bd_inode) >> 9) - 8*2;
 		sb_start &= ~(sector_t)(4*2 - 1);
 		max_sectors = rdev->sectors + sb_start - rdev->sb_start;
 		if (!num_sectors || num_sectors > max_sectors)
@@ -2584,7 +2584,7 @@ rdev_size_store(mdk_rdev_t *rdev, const char *buf, size_t len)
 			if (!sectors)
 				return -EBUSY;
 		} else if (!sectors)
-			sectors = (rdev->bdev->bd_inode->i_size >> 9) -
+			sectors = (i_size_read(rdev->bdev->bd_inode) >> 9) -
 				rdev->data_offset;
 	}
 	if (sectors < my_mddev->dev_sectors)
@@ -2797,7 +2797,7 @@ static mdk_rdev_t *md_import_device(dev_t newdev, int super_format, int super_mi
 
 	kobject_init(&rdev->kobj, &rdev_ktype);
 
-	size = rdev->bdev->bd_inode->i_size >> BLOCK_SIZE_BITS;
+	size = i_size_read(rdev->bdev->bd_inode) >> BLOCK_SIZE_BITS;
 	if (!size) {
 		printk(KERN_WARNING 
 			"md: %s has zero or unknown size, marking faulty!\n",
@@ -5235,8 +5235,8 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info)
 
 		if (!mddev->persistent) {
 			printk(KERN_INFO "md: nonpersistent superblock ...\n");
-			rdev->sb_start = rdev->bdev->bd_inode->i_size / 512;
-		} else 
+			rdev->sb_start = i_size_read(rdev->bdev->bd_inode) / 512;
+		} else
 			rdev->sb_start = calc_dev_sboffset(rdev->bdev);
 		rdev->sectors = rdev->sb_start;
 
@@ -5306,7 +5306,7 @@ static int hot_add_disk(mddev_t * mddev, dev_t dev)
 	if (mddev->persistent)
 		rdev->sb_start = calc_dev_sboffset(rdev->bdev);
 	else
-		rdev->sb_start = rdev->bdev->bd_inode->i_size / 512;
+		rdev->sb_start = i_size_read(rdev->bdev->bd_inode) / 512;
 
 	rdev->sectors = rdev->sb_start;
 

From a014741c0adfb8fb79952939ca087cf03d272bb9 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segooon@gmail.com>
Date: Mon, 8 Nov 2010 14:42:40 +0100
Subject: [PATCH 0400/1066] block: ioctl: fix information leak to userland

Structure hd_geometry is copied to userland with 4 padding bytes
between cylinders and start fields uninitialized on 64-bit platforms.
It leads to leaking of contents of kernel stack memory.

Currently there is no memset() in real implementations of getgeo()
in drivers/block/, so it makes sense to have memset() in blkdev_ioctl().

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/ioctl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/block/ioctl.c b/block/ioctl.c
index 38aa194f63ec..3d866d0037f2 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -242,6 +242,7 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
 		 * We need to set the startsect first, the driver may
 		 * want to override it.
 		 */
+		memset(&geo, 0, sizeof(geo));
 		geo.start = get_start_sect(bdev);
 		ret = disk->fops->getgeo(bdev, &geo);
 		if (ret)

From 1447399b3e34af016c368b4178db7ef0e04e15b0 Mon Sep 17 00:00:00 2001
From: Daniel J Blueman <daniel.blueman@gmail.com>
Date: Tue, 9 Nov 2010 21:33:02 +0100
Subject: [PATCH 0401/1066] ioprio: fix RCU locking around task dereference

With 2.6.37-rc1, I observe sys_ioprio_set not taking the RCU lock [1]
across access to the task credentials.

Inspecting the code in fs/ioprio.c, the tasklist_lock is held for read
across the __task_cred call, which is presumably sufficient to prevent
the task credentials becoming stale.

===================================================

[ INFO: suspicious rcu_dereference_check() usage. ]

---------------------------------------------------

kernel/pid.c:419 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 1

1 lock held by start-stop-daem/2246:

 #0:  (tasklist_lock){.?.?..}, at: [<ffffffff811a2dfa>]
sys_ioprio_set+0x8a/0x400

stack backtrace:

Pid: 2246, comm: start-stop-daem Not tainted 2.6.37-rc1-330cd+ #2

Call Trace:

 [<ffffffff8109f5f4>] lockdep_rcu_dereference+0xa4/0xc0

 [<ffffffff81085651>] find_task_by_pid_ns+0x81/0x90

 [<ffffffff8108567d>] find_task_by_vpid+0x1d/0x20

 [<ffffffff811a3160>] sys_ioprio_set+0x3f0/0x400

 [<ffffffff816efa79>] ? trace_hardirqs_on_thunk+0x3a/0x3f

 [<ffffffff81003482>] system_call_fastpath+0x16/0x1b

Take the RCU lock for read across acquiring the pointer to the task
credentials and dereferencing it.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>

Fixed up by Jens to fix missing rcu_read_unlock() on mismatches.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 fs/ioprio.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/fs/ioprio.c b/fs/ioprio.c
index 748cfb92dcc6..8def14e24c37 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -139,7 +139,12 @@ SYSCALL_DEFINE3(ioprio_set, int, which, int, who, int, ioprio)
 				break;
 
 			do_each_thread(g, p) {
-				if (__task_cred(p)->uid != who)
+				int match;
+
+				rcu_read_lock();
+				match = __task_cred(p)->uid == who;
+				rcu_read_unlock();
+				if (!match)
 					continue;
 				ret = set_task_ioprio(p, ioprio);
 				if (ret)
@@ -232,7 +237,12 @@ SYSCALL_DEFINE2(ioprio_get, int, which, int, who)
 				break;
 
 			do_each_thread(g, p) {
-				if (__task_cred(p)->uid != user->uid)
+				int match;
+
+				rcu_read_lock();
+				match = __task_cred(p)->uid == user->uid;
+				rcu_read_unlock();
+				if (!match)
 					continue;
 				tmpio = get_task_ioprio(p);
 				if (tmpio < 0)

From f85acd81aa623e3dcf268c90e5cd8ecf36830984 Mon Sep 17 00:00:00 2001
From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Date: Tue, 9 Nov 2010 21:26:56 +0100
Subject: [PATCH 0402/1066] ioprio: rcu_read_lock/unlock protect
 find_task_by_vpid call (V2)

Commit 4221a9918e38b7494cee341dda7b7b4bb8c04bde "Add RCU check for
find_task_by_vpid()" introduced rcu_lockdep_assert to find_task_by_pid_ns=

Assertion failed in sys_ioprio_get. The patch is fixing assertion
failure in ioprio_set as well.

 kernel/pid.c:419 invoked rcu_dereference_check() without protection!

 stack backtrace:
 Pid: 4254, comm: iotop Not tainted
 Call Trace:
 [<ffffffff810656f2>] lockdep_rcu_dereference+0xaa/0xb2
 [<ffffffff81053c67>] find_task_by_pid_ns+0x4f/0x68
 [<ffffffff81053c9d>] find_task_by_vpid+0x1d/0x1f
 [<ffffffff811104e2>] sys_ioprio_get+0x50/0x2da
 [<ffffffff81002182>] system_call_fastpath+0x16/0x1b

V2: rcu critical section expanded according to comment by Paul E. McKenney

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 fs/ioprio.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/ioprio.c b/fs/ioprio.c
index 8def14e24c37..2f7d05c89922 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -111,12 +111,14 @@ SYSCALL_DEFINE3(ioprio_set, int, which, int, who, int, ioprio)
 	read_lock(&tasklist_lock);
 	switch (which) {
 		case IOPRIO_WHO_PROCESS:
+			rcu_read_lock();
 			if (!who)
 				p = current;
 			else
 				p = find_task_by_vpid(who);
 			if (p)
 				ret = set_task_ioprio(p, ioprio);
+			rcu_read_unlock();
 			break;
 		case IOPRIO_WHO_PGRP:
 			if (!who)
@@ -205,12 +207,14 @@ SYSCALL_DEFINE2(ioprio_get, int, which, int, who)
 	read_lock(&tasklist_lock);
 	switch (which) {
 		case IOPRIO_WHO_PROCESS:
+			rcu_read_lock();
 			if (!who)
 				p = current;
 			else
 				p = find_task_by_vpid(who);
 			if (p)
 				ret = get_task_ioprio(p);
+			rcu_read_unlock();
 			break;
 		case IOPRIO_WHO_PGRP:
 			if (!who)

From e8719adf30c136319a77824d032b3a185148f8f9 Mon Sep 17 00:00:00 2001
From: Tom Zanussi <tom.zanussi@linux.intel.com>
Date: Wed, 10 Nov 2010 07:52:32 -0600
Subject: [PATCH 0403/1066] perf trace scripting: fix some small memory leaks
 and missing error checks

Free the other two fields of script_desc which somehow got overlooked,
free malloc'ed args in case exec fails, and add missing checks for
failed mallocs.

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
---
 tools/perf/builtin-trace.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 2f8df45c4dcb..368e6249290a 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -337,6 +337,8 @@ static struct script_desc *script_desc__new(const char *name)
 static void script_desc__delete(struct script_desc *s)
 {
 	free(s->name);
+	free(s->half_liner);
+	free(s->args);
 	free(s);
 }
 
@@ -626,6 +628,9 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 			close(live_pipe[0]);
 
 			__argv = malloc(6 * sizeof(const char *));
+			if (!__argv)
+				die("malloc");
+
 			__argv[0] = "/bin/sh";
 			__argv[1] = record_script_path;
 			__argv[2] = "-q";
@@ -634,6 +639,7 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 			__argv[5] = NULL;
 
 			execvp("/bin/sh", (char **)__argv);
+			free(__argv);
 			exit(-1);
 		}
 
@@ -641,6 +647,8 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 		close(live_pipe[1]);
 
 		__argv = malloc((argc + 3) * sizeof(const char *));
+		if (!__argv)
+			die("malloc");
 		__argv[0] = "/bin/sh";
 		__argv[1] = report_script_path;
 		for (i = 2; i < argc; i++)
@@ -650,6 +658,7 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 		__argv[i++] = NULL;
 
 		execvp("/bin/sh", (char **)__argv);
+		free(__argv);
 		exit(-1);
 	}
 
@@ -661,6 +670,8 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 		}
 
 		__argv = malloc((argc + 1) * sizeof(const char *));
+		if (!__argv)
+			die("malloc");
 		__argv[0] = "/bin/sh";
 		__argv[1] = script_path;
 		for (i = 3; i < argc; i++)
@@ -668,6 +679,7 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 		__argv[argc - 1] = NULL;
 
 		execvp("/bin/sh", (char **)__argv);
+		free(__argv);
 		exit(-1);
 	}
 

From 02e031cbc843b010e72fcc05c76113c688b2860f Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Wed, 10 Nov 2010 14:54:09 +0100
Subject: [PATCH 0404/1066] block: remove REQ_HARDBARRIER

REQ_HARDBARRIER is dead now, so remove the leftovers.  What's left
at this point is:

 - various checks inside the block layer.
 - sanity checks in bio based drivers.
 - now unused bio_empty_barrier helper.
 - Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while,
   but Xen really needs to sort out it's barrier situaton.
 - setting of ordered tags in uas - dead code copied from old scsi
   drivers.
 - scsi different retry for barriers - it's dead and should have been
   removed when flushes were converted to FS requests.
 - blktrace handling of barriers - removed.  Someone who knows blktrace
   better should add support for REQ_FLUSH and REQ_FUA, though.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/blk-core.c             |  7 -------
 block/elevator.c             |  4 ++--
 drivers/block/aoe/aoeblk.c   |  3 ---
 drivers/block/loop.c         |  6 ------
 drivers/block/xen-blkfront.c |  2 --
 drivers/scsi/scsi_error.c    | 18 +++++-------------
 drivers/usb/storage/uas.c    |  5 +----
 include/linux/bio.h          |  4 ----
 include/linux/blk_types.h    |  6 ++----
 include/linux/blkdev.h       |  3 +--
 kernel/trace/blktrace.c      |  4 ----
 11 files changed, 11 insertions(+), 51 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index 17fcb83670c0..4ce953f1b390 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1194,13 +1194,6 @@ static int __make_request(struct request_queue *q, struct bio *bio)
 	int where = ELEVATOR_INSERT_SORT;
 	int rw_flags;
 
-	/* REQ_HARDBARRIER is no more */
-	if (WARN_ONCE(bio->bi_rw & REQ_HARDBARRIER,
-		"block: HARDBARRIER is deprecated, use FLUSH/FUA instead\n")) {
-		bio_endio(bio, -EOPNOTSUPP);
-		return 0;
-	}
-
 	/*
 	 * low level driver can indicate that it wants pages above a
 	 * certain limit bounced to low memory (ie for highmem, or even
diff --git a/block/elevator.c b/block/elevator.c
index 282e8308f7e2..2569512830d3 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -429,7 +429,7 @@ void elv_dispatch_sort(struct request_queue *q, struct request *rq)
 	q->nr_sorted--;
 
 	boundary = q->end_sector;
-	stop_flags = REQ_SOFTBARRIER | REQ_HARDBARRIER | REQ_STARTED;
+	stop_flags = REQ_SOFTBARRIER | REQ_STARTED;
 	list_for_each_prev(entry, &q->queue_head) {
 		struct request *pos = list_entry_rq(entry);
 
@@ -691,7 +691,7 @@ void elv_insert(struct request_queue *q, struct request *rq, int where)
 void __elv_add_request(struct request_queue *q, struct request *rq, int where,
 		       int plug)
 {
-	if (rq->cmd_flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) {
+	if (rq->cmd_flags & REQ_SOFTBARRIER) {
 		/* barriers are scheduling boundary, update end_sector */
 		if (rq->cmd_type == REQ_TYPE_FS ||
 		    (rq->cmd_flags & REQ_DISCARD)) {
diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c
index 541e18879965..528f6318ded1 100644
--- a/drivers/block/aoe/aoeblk.c
+++ b/drivers/block/aoe/aoeblk.c
@@ -180,9 +180,6 @@ aoeblk_make_request(struct request_queue *q, struct bio *bio)
 		BUG();
 		bio_endio(bio, -ENXIO);
 		return 0;
-	} else if (bio->bi_rw & REQ_HARDBARRIER) {
-		bio_endio(bio, -EOPNOTSUPP);
-		return 0;
 	} else if (bio->bi_io_vec == NULL) {
 		printk(KERN_ERR "aoe: bi_io_vec is NULL\n");
 		BUG();
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 1e5284ef65fa..7ea0bea2f7e3 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -481,12 +481,6 @@ static int do_bio_filebacked(struct loop_device *lo, struct bio *bio)
 	if (bio_rw(bio) == WRITE) {
 		struct file *file = lo->lo_backing_file;
 
-		/* REQ_HARDBARRIER is deprecated */
-		if (bio->bi_rw & REQ_HARDBARRIER) {
-			ret = -EOPNOTSUPP;
-			goto out;
-		}
-
 		if (bio->bi_rw & REQ_FLUSH) {
 			ret = vfs_fsync(file, 0);
 			if (unlikely(ret && ret != -EINVAL)) {
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 06e2812ba124..255035cfc88a 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -289,8 +289,6 @@ static int blkif_queue_request(struct request *req)
 
 	ring_req->operation = rq_data_dir(req) ?
 		BLKIF_OP_WRITE : BLKIF_OP_READ;
-	if (req->cmd_flags & REQ_HARDBARRIER)
-		ring_req->operation = BLKIF_OP_WRITE_BARRIER;
 
 	ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
 	BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 1de30eb83bb0..f3cf924a2cd9 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -320,19 +320,11 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
 				    "changed. The Linux SCSI layer does not "
 				    "automatically adjust these parameters.\n");
 
-		if (scmd->request->cmd_flags & REQ_HARDBARRIER)
-			/*
-			 * barrier requests should always retry on UA
-			 * otherwise block will get a spurious error
-			 */
-			return NEEDS_RETRY;
-		else
-			/*
-			 * for normal (non barrier) commands, pass the
-			 * UA upwards for a determination in the
-			 * completion functions
-			 */
-			return SUCCESS;
+		/*
+		 * Pass the UA upwards for a determination in the completion
+		 * functions.
+		 */
+		return SUCCESS;
 
 		/* these three are not supported */
 	case COPY_ABORTED:
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 2054b1e25a65..d1268191acbd 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -331,10 +331,7 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 
 	iu->iu_id = IU_ID_COMMAND;
 	iu->tag = cpu_to_be16(stream_id);
-	if (sdev->ordered_tags && (cmnd->request->cmd_flags & REQ_HARDBARRIER))
-		iu->prio_attr = UAS_ORDERED_TAG;
-	else
-		iu->prio_attr = UAS_SIMPLE_TAG;
+	iu->prio_attr = UAS_SIMPLE_TAG;
 	iu->len = len;
 	int_to_scsilun(sdev->lun, &iu->lun);
 	memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
diff --git a/include/linux/bio.h b/include/linux/bio.h
index ba679992d39b..35dcdb3589bc 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -66,10 +66,6 @@
 #define bio_offset(bio)		bio_iovec((bio))->bv_offset
 #define bio_segments(bio)	((bio)->bi_vcnt - (bio)->bi_idx)
 #define bio_sectors(bio)	((bio)->bi_size >> 9)
-#define bio_empty_barrier(bio) \
-	((bio->bi_rw & REQ_HARDBARRIER) && \
-	 !bio_has_data(bio) && \
-	 !(bio->bi_rw & REQ_DISCARD))
 
 static inline unsigned int bio_cur_bytes(struct bio *bio)
 {
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 0437ab6bb54c..46ad5197537a 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -122,7 +122,6 @@ enum rq_flag_bits {
 	__REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */
 	__REQ_FAILFAST_DRIVER,	/* no driver retries of driver errors */
 
-	__REQ_HARDBARRIER,	/* may not be passed by drive either */
 	__REQ_SYNC,		/* request is sync (sync write or read) */
 	__REQ_META,		/* metadata io request */
 	__REQ_DISCARD,		/* request to discard sectors */
@@ -159,7 +158,6 @@ enum rq_flag_bits {
 #define REQ_FAILFAST_DEV	(1 << __REQ_FAILFAST_DEV)
 #define REQ_FAILFAST_TRANSPORT	(1 << __REQ_FAILFAST_TRANSPORT)
 #define REQ_FAILFAST_DRIVER	(1 << __REQ_FAILFAST_DRIVER)
-#define REQ_HARDBARRIER		(1 << __REQ_HARDBARRIER)
 #define REQ_SYNC		(1 << __REQ_SYNC)
 #define REQ_META		(1 << __REQ_META)
 #define REQ_DISCARD		(1 << __REQ_DISCARD)
@@ -168,8 +166,8 @@ enum rq_flag_bits {
 #define REQ_FAILFAST_MASK \
 	(REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
 #define REQ_COMMON_MASK \
-	(REQ_WRITE | REQ_FAILFAST_MASK | REQ_HARDBARRIER | REQ_SYNC | \
-	 REQ_META | REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
+	(REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_DISCARD | \
+	 REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
 #define REQ_CLONE_MASK		REQ_COMMON_MASK
 
 #define REQ_UNPLUG		(1 << __REQ_UNPLUG)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 5027a599077d..aae86fd10c4f 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -552,8 +552,7 @@ static inline void blk_clear_queue_full(struct request_queue *q, int sync)
  * it already be started by driver.
  */
 #define RQ_NOMERGE_FLAGS	\
-	(REQ_NOMERGE | REQ_STARTED | REQ_HARDBARRIER | REQ_SOFTBARRIER | \
-	 REQ_FLUSH | REQ_FUA)
+	(REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA)
 #define rq_mergeable(rq)	\
 	(!((rq)->cmd_flags & RQ_NOMERGE_FLAGS) && \
 	 (((rq)->cmd_flags & REQ_DISCARD) || \
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index bc251ed66724..7b8ec0281548 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -168,7 +168,6 @@ static int act_log_check(struct blk_trace *bt, u32 what, sector_t sector,
 static const u32 ddir_act[2] = { BLK_TC_ACT(BLK_TC_READ),
 				 BLK_TC_ACT(BLK_TC_WRITE) };
 
-#define BLK_TC_HARDBARRIER	BLK_TC_BARRIER
 #define BLK_TC_RAHEAD		BLK_TC_AHEAD
 
 /* The ilog2() calls fall out because they're constant */
@@ -196,7 +195,6 @@ static void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes,
 		return;
 
 	what |= ddir_act[rw & WRITE];
-	what |= MASK_TC_BIT(rw, HARDBARRIER);
 	what |= MASK_TC_BIT(rw, SYNC);
 	what |= MASK_TC_BIT(rw, RAHEAD);
 	what |= MASK_TC_BIT(rw, META);
@@ -1807,8 +1805,6 @@ void blk_fill_rwbs(char *rwbs, u32 rw, int bytes)
 
 	if (rw & REQ_RAHEAD)
 		rwbs[i++] = 'A';
-	if (rw & REQ_HARDBARRIER)
-		rwbs[i++] = 'B';
 	if (rw & REQ_SYNC)
 		rwbs[i++] = 'S';
 	if (rw & REQ_META)

From b0b6d914e2b7e0a736635515e87be718050c17c8 Mon Sep 17 00:00:00 2001
From: Tom Zanussi <tom.zanussi@linux.intel.com>
Date: Wed, 10 Nov 2010 08:08:20 -0600
Subject: [PATCH 0405/1066] perf trace scripting: remove system-wide param from
 shell scripts

Including -a unconditionally when recording doesn't allow for the
option of running scripts without it.  Future patches will add add it
back if needed at run-time.

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
---
 tools/perf/scripts/perl/bin/failed-syscalls-record          | 2 +-
 tools/perf/scripts/perl/bin/rw-by-file-record               | 2 +-
 tools/perf/scripts/perl/bin/rw-by-pid-record                | 2 +-
 tools/perf/scripts/perl/bin/rwtop-record                    | 2 +-
 tools/perf/scripts/perl/bin/wakeup-latency-record           | 2 +-
 tools/perf/scripts/perl/bin/workqueue-stats-record          | 2 +-
 tools/perf/scripts/python/bin/failed-syscalls-by-pid-record | 2 +-
 tools/perf/scripts/python/bin/futex-contention-record       | 2 +-
 tools/perf/scripts/python/bin/netdev-times-record           | 2 +-
 tools/perf/scripts/python/bin/sched-migration-record        | 2 +-
 tools/perf/scripts/python/bin/sctop-record                  | 2 +-
 tools/perf/scripts/python/bin/syscall-counts-by-pid-record  | 2 +-
 tools/perf/scripts/python/bin/syscall-counts-record         | 2 +-
 13 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/tools/perf/scripts/perl/bin/failed-syscalls-record b/tools/perf/scripts/perl/bin/failed-syscalls-record
index eb5846bcb565..8104895a7b67 100644
--- a/tools/perf/scripts/perl/bin/failed-syscalls-record
+++ b/tools/perf/scripts/perl/bin/failed-syscalls-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e raw_syscalls:sys_exit $@
+perf record -e raw_syscalls:sys_exit $@
diff --git a/tools/perf/scripts/perl/bin/rw-by-file-record b/tools/perf/scripts/perl/bin/rw-by-file-record
index 5bfaae5a6cba..33efc8673aae 100644
--- a/tools/perf/scripts/perl/bin/rw-by-file-record
+++ b/tools/perf/scripts/perl/bin/rw-by-file-record
@@ -1,3 +1,3 @@
 #!/bin/bash
-perf record -a -e syscalls:sys_enter_read -e syscalls:sys_enter_write $@
+perf record -e syscalls:sys_enter_read -e syscalls:sys_enter_write $@
 
diff --git a/tools/perf/scripts/perl/bin/rw-by-pid-record b/tools/perf/scripts/perl/bin/rw-by-pid-record
index 6e0b2f7755ac..7cb9db230448 100644
--- a/tools/perf/scripts/perl/bin/rw-by-pid-record
+++ b/tools/perf/scripts/perl/bin/rw-by-pid-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@
+perf record -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@
diff --git a/tools/perf/scripts/perl/bin/rwtop-record b/tools/perf/scripts/perl/bin/rwtop-record
index 6e0b2f7755ac..7cb9db230448 100644
--- a/tools/perf/scripts/perl/bin/rwtop-record
+++ b/tools/perf/scripts/perl/bin/rwtop-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@
+perf record -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@
diff --git a/tools/perf/scripts/perl/bin/wakeup-latency-record b/tools/perf/scripts/perl/bin/wakeup-latency-record
index 9f2acaaae9f0..464251a1bd7e 100644
--- a/tools/perf/scripts/perl/bin/wakeup-latency-record
+++ b/tools/perf/scripts/perl/bin/wakeup-latency-record
@@ -1,5 +1,5 @@
 #!/bin/bash
-perf record -a -e sched:sched_switch -e sched:sched_wakeup $@
+perf record -e sched:sched_switch -e sched:sched_wakeup $@
 
 
 
diff --git a/tools/perf/scripts/perl/bin/workqueue-stats-record b/tools/perf/scripts/perl/bin/workqueue-stats-record
index 85301f2471ff..8edda9078d5d 100644
--- a/tools/perf/scripts/perl/bin/workqueue-stats-record
+++ b/tools/perf/scripts/perl/bin/workqueue-stats-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e workqueue:workqueue_creation -e workqueue:workqueue_destruction -e workqueue:workqueue_execution -e workqueue:workqueue_insertion $@
+perf record -e workqueue:workqueue_creation -e workqueue:workqueue_destruction -e workqueue:workqueue_execution -e workqueue:workqueue_insertion $@
diff --git a/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record b/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record
index eb5846bcb565..8104895a7b67 100644
--- a/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record
+++ b/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e raw_syscalls:sys_exit $@
+perf record -e raw_syscalls:sys_exit $@
diff --git a/tools/perf/scripts/python/bin/futex-contention-record b/tools/perf/scripts/python/bin/futex-contention-record
index 5ecbb433caf4..b1495c9a9b20 100644
--- a/tools/perf/scripts/python/bin/futex-contention-record
+++ b/tools/perf/scripts/python/bin/futex-contention-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e syscalls:sys_enter_futex -e syscalls:sys_exit_futex $@
+perf record -e syscalls:sys_enter_futex -e syscalls:sys_exit_futex $@
diff --git a/tools/perf/scripts/python/bin/netdev-times-record b/tools/perf/scripts/python/bin/netdev-times-record
index d931a828126b..558754b840a9 100644
--- a/tools/perf/scripts/python/bin/netdev-times-record
+++ b/tools/perf/scripts/python/bin/netdev-times-record
@@ -1,5 +1,5 @@
 #!/bin/bash
-perf record -a -e net:net_dev_xmit -e net:net_dev_queue		\
+perf record -e net:net_dev_xmit -e net:net_dev_queue		\
 		-e net:netif_receive_skb -e net:netif_rx		\
 		-e skb:consume_skb -e skb:kfree_skb			\
 		-e skb:skb_copy_datagram_iovec -e napi:napi_poll	\
diff --git a/tools/perf/scripts/python/bin/sched-migration-record b/tools/perf/scripts/python/bin/sched-migration-record
index 17a3e9bd9e8f..7493fddbe995 100644
--- a/tools/perf/scripts/python/bin/sched-migration-record
+++ b/tools/perf/scripts/python/bin/sched-migration-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -m 16384 -a -e sched:sched_wakeup -e sched:sched_wakeup_new -e sched:sched_switch -e sched:sched_migrate_task $@
+perf record -m 16384 -e sched:sched_wakeup -e sched:sched_wakeup_new -e sched:sched_switch -e sched:sched_migrate_task $@
diff --git a/tools/perf/scripts/python/bin/sctop-record b/tools/perf/scripts/python/bin/sctop-record
index 1fc5998b721d..4efbfaa7f6a5 100644
--- a/tools/perf/scripts/python/bin/sctop-record
+++ b/tools/perf/scripts/python/bin/sctop-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e raw_syscalls:sys_enter $@
+perf record -e raw_syscalls:sys_enter $@
diff --git a/tools/perf/scripts/python/bin/syscall-counts-by-pid-record b/tools/perf/scripts/python/bin/syscall-counts-by-pid-record
index 1fc5998b721d..4efbfaa7f6a5 100644
--- a/tools/perf/scripts/python/bin/syscall-counts-by-pid-record
+++ b/tools/perf/scripts/python/bin/syscall-counts-by-pid-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e raw_syscalls:sys_enter $@
+perf record -e raw_syscalls:sys_enter $@
diff --git a/tools/perf/scripts/python/bin/syscall-counts-record b/tools/perf/scripts/python/bin/syscall-counts-record
index 1fc5998b721d..4efbfaa7f6a5 100644
--- a/tools/perf/scripts/python/bin/syscall-counts-record
+++ b/tools/perf/scripts/python/bin/syscall-counts-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e raw_syscalls:sys_enter $@
+perf record -e raw_syscalls:sys_enter $@

From bca647aac5067fec8dfcbf8ddb79a4c0d5afdfdd Mon Sep 17 00:00:00 2001
From: Tom Zanussi <tom.zanussi@linux.intel.com>
Date: Wed, 10 Nov 2010 08:11:30 -0600
Subject: [PATCH 0406/1066] perf record: make the record options available
 outside perf record

Other perf commands that invoke perf record, such as perf trace, may
want to reuse the options used by perf record.

This makes them non-static and renames them to avoid clashes with
other 'options' variables.

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
---
 tools/perf/builtin-record.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 4e75583ddd6d..93bd2ff001fb 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -790,7 +790,7 @@ static const char * const record_usage[] = {
 
 static bool force, append_file;
 
-static const struct option options[] = {
+const struct option record_options[] = {
 	OPT_CALLBACK('e', "event", NULL, "event",
 		     "event selector. use 'perf list' to list available events",
 		     parse_events),
@@ -839,16 +839,16 @@ int cmd_record(int argc, const char **argv, const char *prefix __used)
 {
 	int i, j, err = -ENOMEM;
 
-	argc = parse_options(argc, argv, options, record_usage,
+	argc = parse_options(argc, argv, record_options, record_usage,
 			    PARSE_OPT_STOP_AT_NON_OPTION);
 	if (!argc && target_pid == -1 && target_tid == -1 &&
 		!system_wide && !cpu_list)
-		usage_with_options(record_usage, options);
+		usage_with_options(record_usage, record_options);
 
 	if (force && append_file) {
 		fprintf(stderr, "Can't overwrite and append at the same time."
 				" You need to choose between -f and -A");
-		usage_with_options(record_usage, options);
+		usage_with_options(record_usage, record_options);
 	} else if (append_file) {
 		write_mode = WRITE_APPEND;
 	} else {
@@ -871,7 +871,7 @@ int cmd_record(int argc, const char **argv, const char *prefix __used)
 		if (thread_num <= 0) {
 			fprintf(stderr, "Can't find all threads of pid %d\n",
 					target_pid);
-			usage_with_options(record_usage, options);
+			usage_with_options(record_usage, record_options);
 		}
 	} else {
 		all_tids=malloc(sizeof(pid_t));

From 34c86ea97ed811bb40ee4db63f710eb522162c77 Mon Sep 17 00:00:00 2001
From: Tom Zanussi <tom.zanussi@linux.intel.com>
Date: Wed, 10 Nov 2010 08:15:43 -0600
Subject: [PATCH 0407/1066] perf trace record: handle commands correctly

Because the perf-trace shell scripts hard-coded the use of the
perf-record system-wide param, a perf trace record session was always
system wide, even if it was given a command.

If given a command, perf trace record now only records the events for
the command, as users expect.

If no command is given, or if the '-a' option is used, the recorded
events are system-wide, as before.

root@tropicana:~# perf trace record syscall-counts ls -al
root@tropicana:~# perf trace
              ls-23152 [000] 39984.890387: sys_enter: NR 12 (0, 0, 0, 0, 0, 0)
              ls-23152 [000] 39984.890404: sys_enter: NR 9 (0, 0, 0, 0, 0, 0)

root@tropicana:~# perf trace record syscall-counts -a ls -al
root@tropicana:~# perf trace
    npviewer.bin-22297 [000] 39831.102709: sys_enter: NR 168 (0, 0, 0, 0, 0, 0)
              ls-23111 [000] 39831.107679: sys_enter: NR 59 (0, 0, 0, 0, 0, 0)

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
---
 tools/perf/builtin-trace.c | 32 ++++++++++++++++++++++++++++----
 1 file changed, 28 insertions(+), 4 deletions(-)

diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 368e6249290a..0de7fcb90965 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -10,6 +10,7 @@
 #include "util/symbol.h"
 #include "util/thread.h"
 #include "util/trace-event.h"
+#include "util/parse-options.h"
 #include "util/util.h"
 
 static char const		*script_name;
@@ -17,6 +18,7 @@ static char const		*generate_script_lang;
 static bool			debug_mode;
 static u64			last_timestamp;
 static u64			nr_unordered;
+extern const struct option	record_options[];
 
 static int default_start_script(const char *script __unused,
 				int argc __unused,
@@ -566,6 +568,20 @@ static const struct option options[] = {
 	OPT_END()
 };
 
+static bool have_cmd(int argc, const char **argv)
+{
+	char **__argv = malloc(sizeof(const char *) * argc);
+
+	if (!__argv)
+		die("malloc");
+	memcpy(__argv, argv, sizeof(const char *) * argc);
+	argc = parse_options(argc, (const char **)__argv, record_options,
+			     NULL, PARSE_OPT_STOP_AT_NON_OPTION);
+	free(__argv);
+
+	return argc != 0;
+}
+
 int cmd_trace(int argc, const char **argv, const char *prefix __used)
 {
 	struct perf_session *session;
@@ -663,20 +679,28 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 	}
 
 	if (suffix) {
+		bool system_wide = false;
+		int j = 0;
+
 		script_path = get_script_path(argv[2], suffix);
 		if (!script_path) {
 			fprintf(stderr, "script not found\n");
 			return -1;
 		}
 
+		if (!strcmp(suffix, RECORD_SUFFIX))
+			system_wide = !have_cmd(argc - 2, &argv[2]);
+
 		__argv = malloc((argc + 1) * sizeof(const char *));
 		if (!__argv)
 			die("malloc");
-		__argv[0] = "/bin/sh";
-		__argv[1] = script_path;
+		__argv[j++] = "/bin/sh";
+		__argv[j++] = script_path;
+		if (system_wide)
+			__argv[j++] = "-a";
 		for (i = 3; i < argc; i++)
-			__argv[i - 1] = argv[i];
-		__argv[argc - 1] = NULL;
+			__argv[j++] = argv[i];
+		__argv[j++] = NULL;
 
 		execvp("/bin/sh", (char **)__argv);
 		free(__argv);

From b5b8731219ddd007c229feacbfe745d1be070e6a Mon Sep 17 00:00:00 2001
From: Tom Zanussi <tom.zanussi@linux.intel.com>
Date: Wed, 10 Nov 2010 08:16:51 -0600
Subject: [PATCH 0408/1066] perf trace: live-mode command-line cleanup

This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.

The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.

With this patch, the following live-mode trace now works as expected:

 $ perf trace rw-by-pid ls -al

The previous system-wide behavior for this command would still be
available by explicitly specifying -a:

 $ perf trace rw-by-pid -a ls -al

and if no <command> is specified, the output is also system-wide:

 $ perf trace rw-by-pid

Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.

For example:

 $ perf trace syscall-counts ls

Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.

If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:

 $ perf trace record syscall-counts
 $ perf trace report syscall-counts ls

So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:

- for commands with optional args and commands with no args, no args
  are sent to the report script, all are sent to the record step

- for 'top' commands i.e. that end with 'top', <commands> can't be
  used - all extra args are send to the report script as params

- for commands with required args, the n required args are taken to be
  the first n args after the script name and sent to the report
  script, and the rest are sent to the record step

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
---
 tools/perf/builtin-trace.c | 189 +++++++++++++++++++++++--------------
 1 file changed, 120 insertions(+), 69 deletions(-)

diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 0de7fcb90965..0483e28fa60d 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -330,7 +330,7 @@ static struct script_desc *script_desc__new(const char *name)
 {
 	struct script_desc *s = zalloc(sizeof(*s));
 
-	if (s != NULL)
+	if (s != NULL && name)
 		s->name = strdup(name);
 
 	return s;
@@ -541,6 +541,34 @@ static char *get_script_path(const char *script_root, const char *suffix)
 	return path;
 }
 
+static bool is_top_script(const char *script_path)
+{
+	return ends_with((char *)script_path, "top") == NULL ? false : true;
+}
+
+static int has_required_arg(char *script_path)
+{
+	struct script_desc *desc;
+	int n_args = 0;
+	char *p;
+
+	desc = script_desc__new(NULL);
+
+	if (read_script_info(desc, script_path))
+		goto out;
+
+	if (!desc->args)
+		goto out;
+
+	for (p = desc->args; *p; p++)
+		if (*p == '<')
+			n_args++;
+out:
+	script_desc__delete(desc);
+
+	return n_args;
+}
+
 static const char * const trace_usage[] = {
 	"perf trace [<options>] <command>",
 	NULL
@@ -584,48 +612,65 @@ static bool have_cmd(int argc, const char **argv)
 
 int cmd_trace(int argc, const char **argv, const char *prefix __used)
 {
+	char *rec_script_path = NULL;
+	char *rep_script_path = NULL;
 	struct perf_session *session;
-	const char *suffix = NULL;
+	char *script_path = NULL;
 	const char **__argv;
-	char *script_path;
-	int i, err;
+	bool system_wide;
+	int i, j, err;
 
-	if (argc >= 2 && strncmp(argv[1], "rec", strlen("rec")) == 0) {
-		if (argc < 3) {
-			fprintf(stderr,
-				"Please specify a record script\n");
-			return -1;
-		}
-		suffix = RECORD_SUFFIX;
+	setup_scripting();
+
+	argc = parse_options(argc, argv, options, trace_usage,
+			     PARSE_OPT_STOP_AT_NON_OPTION);
+
+	if (argc > 1 && !strncmp(argv[0], "rec", strlen("rec"))) {
+		rec_script_path = get_script_path(argv[1], RECORD_SUFFIX);
+		if (!rec_script_path)
+			return cmd_record(argc, argv, NULL);
 	}
 
-	if (argc >= 2 && strncmp(argv[1], "rep", strlen("rep")) == 0) {
-		if (argc < 3) {
+	if (argc > 1 && !strncmp(argv[0], "rep", strlen("rep"))) {
+		rep_script_path = get_script_path(argv[1], REPORT_SUFFIX);
+		if (!rep_script_path) {
 			fprintf(stderr,
-				"Please specify a report script\n");
+				"Please specify a valid report script"
+				"(see 'perf trace -l' for listing)\n");
 			return -1;
 		}
-		suffix = REPORT_SUFFIX;
 	}
 
 	/* make sure PERF_EXEC_PATH is set for scripts */
 	perf_set_argv_exec_path(perf_exec_path());
 
-	if (!suffix && argc >= 2 && strncmp(argv[1], "-", strlen("-")) != 0) {
-		char *record_script_path, *report_script_path;
+	if (argc && !script_name && !rec_script_path && !rep_script_path) {
 		int live_pipe[2];
+		int rep_args;
 		pid_t pid;
 
-		record_script_path = get_script_path(argv[1], RECORD_SUFFIX);
-		if (!record_script_path) {
-			fprintf(stderr, "record script not found\n");
-			return -1;
+		rec_script_path = get_script_path(argv[0], RECORD_SUFFIX);
+		rep_script_path = get_script_path(argv[0], REPORT_SUFFIX);
+
+		if (!rec_script_path && !rep_script_path) {
+			fprintf(stderr, " Couldn't find script %s\n\n See perf"
+				" trace -l for available scripts.\n", argv[0]);
+			usage_with_options(trace_usage, options);
 		}
 
-		report_script_path = get_script_path(argv[1], REPORT_SUFFIX);
-		if (!report_script_path) {
-			fprintf(stderr, "report script not found\n");
-			return -1;
+		if (is_top_script(argv[0])) {
+			rep_args = argc - 1;
+		} else {
+			int rec_args;
+
+			rep_args = has_required_arg(rep_script_path);
+			rec_args = (argc - 1) - rep_args;
+			if (rec_args < 0) {
+				fprintf(stderr, " %s script requires options."
+					"\n\n See perf trace -l for available "
+					"scripts and options.\n", argv[0]);
+				usage_with_options(trace_usage, options);
+			}
 		}
 
 		if (pipe(live_pipe) < 0) {
@@ -640,19 +685,30 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 		}
 
 		if (!pid) {
+			system_wide = true;
+			j = 0;
+
 			dup2(live_pipe[1], 1);
 			close(live_pipe[0]);
 
-			__argv = malloc(6 * sizeof(const char *));
+			if (!is_top_script(argv[0]))
+				system_wide = !have_cmd(argc - rep_args,
+							&argv[rep_args]);
+
+			__argv = malloc((argc + 6) * sizeof(const char *));
 			if (!__argv)
 				die("malloc");
 
-			__argv[0] = "/bin/sh";
-			__argv[1] = record_script_path;
-			__argv[2] = "-q";
-			__argv[3] = "-o";
-			__argv[4] = "-";
-			__argv[5] = NULL;
+			__argv[j++] = "/bin/sh";
+			__argv[j++] = rec_script_path;
+			if (system_wide)
+				__argv[j++] = "-a";
+			__argv[j++] = "-q";
+			__argv[j++] = "-o";
+			__argv[j++] = "-";
+			for (i = rep_args + 1; i < argc; i++)
+				__argv[j++] = argv[i];
+			__argv[j++] = NULL;
 
 			execvp("/bin/sh", (char **)__argv);
 			free(__argv);
@@ -662,44 +718,16 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 		dup2(live_pipe[0], 0);
 		close(live_pipe[1]);
 
-		__argv = malloc((argc + 3) * sizeof(const char *));
-		if (!__argv)
-			die("malloc");
-		__argv[0] = "/bin/sh";
-		__argv[1] = report_script_path;
-		for (i = 2; i < argc; i++)
-			__argv[i] = argv[i];
-		__argv[i++] = "-i";
-		__argv[i++] = "-";
-		__argv[i++] = NULL;
-
-		execvp("/bin/sh", (char **)__argv);
-		free(__argv);
-		exit(-1);
-	}
-
-	if (suffix) {
-		bool system_wide = false;
-		int j = 0;
-
-		script_path = get_script_path(argv[2], suffix);
-		if (!script_path) {
-			fprintf(stderr, "script not found\n");
-			return -1;
-		}
-
-		if (!strcmp(suffix, RECORD_SUFFIX))
-			system_wide = !have_cmd(argc - 2, &argv[2]);
-
-		__argv = malloc((argc + 1) * sizeof(const char *));
+		__argv = malloc((argc + 4) * sizeof(const char *));
 		if (!__argv)
 			die("malloc");
+		j = 0;
 		__argv[j++] = "/bin/sh";
-		__argv[j++] = script_path;
-		if (system_wide)
-			__argv[j++] = "-a";
-		for (i = 3; i < argc; i++)
+		__argv[j++] = rep_script_path;
+		for (i = 1; i < rep_args + 1; i++)
 			__argv[j++] = argv[i];
+		__argv[j++] = "-i";
+		__argv[j++] = "-";
 		__argv[j++] = NULL;
 
 		execvp("/bin/sh", (char **)__argv);
@@ -707,10 +735,33 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 		exit(-1);
 	}
 
-	setup_scripting();
+	if (rec_script_path)
+		script_path = rec_script_path;
+	if (rep_script_path)
+		script_path = rep_script_path;
 
-	argc = parse_options(argc, argv, options, trace_usage,
-			     PARSE_OPT_STOP_AT_NON_OPTION);
+	if (script_path) {
+		system_wide = false;
+		j = 0;
+
+		if (rec_script_path)
+			system_wide = !have_cmd(argc - 1, &argv[1]);
+
+		__argv = malloc((argc + 2) * sizeof(const char *));
+		if (!__argv)
+			die("malloc");
+		__argv[j++] = "/bin/sh";
+		__argv[j++] = script_path;
+		if (system_wide)
+			__argv[j++] = "-a";
+		for (i = 2; i < argc; i++)
+			__argv[j++] = argv[i];
+		__argv[j++] = NULL;
+
+		execvp("/bin/sh", (char **)__argv);
+		free(__argv);
+		exit(-1);
+	}
 
 	if (symbol__init() < 0)
 		return -1;

From d3c4f798ac4b7337b417467f36f4b2e6dcb49240 Mon Sep 17 00:00:00 2001
From: Tom Zanussi <tom.zanussi@linux.intel.com>
Date: Wed, 10 Nov 2010 08:19:35 -0600
Subject: [PATCH 0409/1066] perf trace: update Documentation with new perf
 trace variants

Add documentation describing new 'perf trace' command changes
e.g. <command> handling and live-mode/top variants.

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
---
 tools/perf/Documentation/perf-trace.txt | 57 +++++++++++++++++++++----
 1 file changed, 49 insertions(+), 8 deletions(-)

diff --git a/tools/perf/Documentation/perf-trace.txt b/tools/perf/Documentation/perf-trace.txt
index 122ec9dc4853..26aff6bf9e50 100644
--- a/tools/perf/Documentation/perf-trace.txt
+++ b/tools/perf/Documentation/perf-trace.txt
@@ -8,7 +8,11 @@ perf-trace - Read perf.data (created by perf record) and display trace output
 SYNOPSIS
 --------
 [verse]
-'perf trace' {record <script> | report <script> [args] }
+'perf trace' [<options>]
+'perf trace' [<options>] record <script> [<record-options>] <command>
+'perf trace' [<options>] report <script> [script-args]
+'perf trace' [<options>] <script> <required-script-args> [<record-options>] <command>
+'perf trace' [<options>] <top-script> [script-args]
 
 DESCRIPTION
 -----------
@@ -24,23 +28,53 @@ There are several variants of perf trace:
   available via 'perf trace -l').  The following variants allow you to
   record and run those scripts:
 
-  'perf trace record <script>' to record the events required for 'perf
-  trace report'.  <script> is the name displayed in the output of
-  'perf trace --list' i.e. the actual script name minus any language
-  extension.
+  'perf trace record <script> <command>' to record the events required
+  for 'perf trace report'.  <script> is the name displayed in the
+  output of 'perf trace --list' i.e. the actual script name minus any
+  language extension.  If <command> is not specified, the events are
+  recorded using the -a (system-wide) 'perf record' option.
 
-  'perf trace report <script>' to run and display the results of
-  <script>.  <script> is the name displayed in the output of 'perf
+  'perf trace report <script> [args]' to run and display the results
+  of <script>.  <script> is the name displayed in the output of 'perf
   trace --list' i.e. the actual script name minus any language
   extension.  The perf.data output from a previous run of 'perf trace
   record <script>' is used and should be present for this command to
-  succeed.
+  succeed.  [args] refers to the (mainly optional) args expected by
+  the script.
+
+  'perf trace <script> <required-script-args> <command>' to both
+  record the events required for <script> and to run the <script>
+  using 'live-mode' i.e. without writing anything to disk.  <script>
+  is the name displayed in the output of 'perf trace --list' i.e. the
+  actual script name minus any language extension.  If <command> is
+  not specified, the events are recorded using the -a (system-wide)
+  'perf record' option.  If <script> has any required args, they
+  should be specified before <command>.  This mode doesn't allow for
+  optional script args to be specified; if optional script args are
+  desired, they can be specified using separate 'perf trace record'
+  and 'perf trace report' commands, with the stdout of the record step
+  piped to the stdin of the report script, using the '-o -' and '-i -'
+  options of the corresponding commands.
+
+  'perf trace <top-script>' to both record the events required for
+  <top-script> and to run the <top-script> using 'live-mode'
+  i.e. without writing anything to disk.  <top-script> is the name
+  displayed in the output of 'perf trace --list' i.e. the actual
+  script name minus any language extension; a <top-script> is defined
+  as any script name ending with the string 'top'.
+
+  [<record-options>] can be passed to the record steps of 'perf trace
+  record' and 'live-mode' variants; this isn't possible however for
+  <top-script> 'live-mode' or 'perf trace report' variants.
 
   See the 'SEE ALSO' section for links to language-specific
   information on how to write and run your own trace scripts.
 
 OPTIONS
 -------
+<command>...::
+	Any command you can specify in a shell.
+
 -D::
 --dump-raw-trace=::
         Display verbose dump of the trace data.
@@ -64,6 +98,13 @@ OPTIONS
         Generate perf-trace.[ext] starter script for given language,
         using current perf.data.
 
+-a::
+        Force system-wide collection.  Scripts run without a <command>
+        normally use -a by default, while scripts run with a <command>
+        normally don't - this option allows the latter to be run in
+        system-wide mode.
+
+
 SEE ALSO
 --------
 linkperf:perf-record[1], linkperf:perf-trace-perl[1],

From 7e55055e5bb00085051ca59c570c83a820e1e0ee Mon Sep 17 00:00:00 2001
From: Tom Zanussi <tom.zanussi@linux.intel.com>
Date: Wed, 10 Nov 2010 08:20:45 -0600
Subject: [PATCH 0410/1066] perf trace: update usage

Update usage to reflect the different perf trace variants.

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
---
 tools/perf/builtin-trace.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 0483e28fa60d..86cfe3800e6b 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -570,7 +570,11 @@ out:
 }
 
 static const char * const trace_usage[] = {
-	"perf trace [<options>] <command>",
+	"perf trace [<options>]",
+	"perf trace [<options>] record <script> [<record-options>] <command>",
+	"perf trace [<options>] report <script> [script-args]",
+	"perf trace [<options>] <script> [<record-options>] <command>",
+	"perf trace [<options>] <top-script> [script-args]",
 	NULL
 };
 

From e56c010f0d08bbecd05074eded7805d555da29b6 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Wed, 10 Nov 2010 15:59:11 +0100
Subject: [PATCH 0411/1066] ARM: 6472/1: vexpress ct-ca9x4: only set twd_base
 if local timers are being used

In commit bde28b84, I made the assumption that CONFIG_SMP is always set
for the quad-core ct-ca9x4 platform. As it turns out, people who aren't
using the SMP goodness are confronted with a build failure.

This patch fixes this issue by ensure that twd_base is only set if
local timers are being used (and therefore SMP support is configured).

Reported-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-vexpress/ct-ca9x4.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index c2e405a9e025..fd25ccd7272f 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -54,7 +54,9 @@ static struct map_desc ct_ca9x4_io_desc[] __initdata = {
 
 static void __init ct_ca9x4_map_io(void)
 {
+#ifdef CONFIG_LOCAL_TIMERS
 	twd_base = MMIO_P2V(A9_MPCORE_TWD);
+#endif
 	v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
 }
 

From c28a9926f28e8c7c52603db58754a78008768ca1 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 9 Nov 2010 12:00:11 +0000
Subject: [PATCH 0412/1066] ASoC: Remove broken WM8350 direction constants

The WM8350 driver was using some custom constants to interpret the direction
of the MCLK signal which had the opposite values to those used as standard
by the ASoC core, causing confusion in machine drivers such as the 1133-EV1
board.

Reported-by: Tommy Zhu <Tommy.Zhu@wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 include/linux/mfd/wm8350/audio.h | 3 ---
 sound/soc/codecs/wm8350.c        | 2 +-
 2 files changed, 1 insertion(+), 4 deletions(-)

diff --git a/include/linux/mfd/wm8350/audio.h b/include/linux/mfd/wm8350/audio.h
index a95141eafce3..bd581c6fa085 100644
--- a/include/linux/mfd/wm8350/audio.h
+++ b/include/linux/mfd/wm8350/audio.h
@@ -522,9 +522,6 @@
 #define WM8350_MCLK_SEL_PLL_32K			3
 #define WM8350_MCLK_SEL_MCLK			5
 
-#define WM8350_MCLK_DIR_OUT			0
-#define WM8350_MCLK_DIR_IN			1
-
 /* clock divider id's */
 #define WM8350_ADC_CLKDIV			0
 #define WM8350_DAC_CLKDIV			1
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index f4f1fba38eb9..4f3e919a0755 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -831,7 +831,7 @@ static int wm8350_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 	}
 
 	/* MCLK direction */
-	if (dir == WM8350_MCLK_DIR_OUT)
+	if (dir == SND_SOC_CLOCK_OUT)
 		wm8350_set_bits(wm8350, WM8350_CLOCK_CONTROL_2,
 				WM8350_MCLK_DIR);
 	else

From 0049317edb76d17bfac736b658523c15935391a3 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 9 Nov 2010 14:38:58 +0000
Subject: [PATCH 0413/1066] ASoC: Ensure sane WM835x AIF configuration by
 default

Ensure that whatever ran before us leaves the WM835x with a sane default
audio interface configuration as we do not override the companding,
loopback or tristate settings and do not reset the chip at startup (as it
is a PMIC).

Reported-by: Keiji Mitsuhisa <Keiji.Mitsuhisa@wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 sound/soc/codecs/wm8350.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index 4f3e919a0755..7611add7f8c3 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -1586,6 +1586,13 @@ static  int wm8350_codec_probe(struct snd_soc_codec *codec)
 	wm8350_set_bits(wm8350, WM8350_ROUT2_VOLUME,
 			WM8350_OUT2_VU | WM8350_OUT2R_MUTE);
 
+	/* Make sure AIF tristating is disabled by default */
+	wm8350_clear_bits(wm8350, WM8350_AI_FORMATING, WM8350_AIF_TRI);
+
+	/* Make sure we've got a sane companding setup too */
+	wm8350_clear_bits(wm8350, WM8350_ADC_DAC_COMP,
+			  WM8350_DAC_COMP | WM8350_LOOPBACK);
+
 	/* Make sure jack detect is disabled to start off with */
 	wm8350_clear_bits(wm8350, WM8350_JACK_DETECT,
 			  WM8350_JDL_ENA | WM8350_JDR_ENA);

From 5d0af85cd0964bb845b63d5059bb20e8f7731e65 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Thu, 28 Oct 2010 21:37:10 +0000
Subject: [PATCH 0414/1066] xfs: remove experimental tag from the delaylog
 option

We promised to do this for 2.6.37, and the code looks stable enough to
keep that promise.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
---
 .../filesystems/xfs-delayed-logging-design.txt        | 11 -----------
 fs/xfs/linux-2.6/xfs_super.c                          |  3 ---
 2 files changed, 14 deletions(-)

diff --git a/Documentation/filesystems/xfs-delayed-logging-design.txt b/Documentation/filesystems/xfs-delayed-logging-design.txt
index 96d0df28bed3..7445bf335dae 100644
--- a/Documentation/filesystems/xfs-delayed-logging-design.txt
+++ b/Documentation/filesystems/xfs-delayed-logging-design.txt
@@ -794,17 +794,6 @@ designed.
 
 Roadmap:
 
-2.6.37 Remove experimental tag from mount option
-	=> should be roughly 6 months after initial merge
-	=> enough time to:
-		=> gain confidence and fix problems reported by early
-		   adopters (a.k.a. guinea pigs)
-		=> address worst performance regressions and undesired
-		   behaviours
-		=> start tuning/optimising code for parallelism
-		=> start tuning/optimising algorithms consuming
-		   excessive CPU time
-
 2.6.39 Switch default mount option to use delayed logging
 	=> should be roughly 12 months after initial merge
 	=> enough time to shake out remaining problems before next round of
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 9f3a78fe6ae4..064f964d4f3c 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -353,9 +353,6 @@ xfs_parseargs(
 			mp->m_qflags &= ~XFS_OQUOTA_ENFD;
 		} else if (!strcmp(this_char, MNTOPT_DELAYLOG)) {
 			mp->m_flags |= XFS_MOUNT_DELAYLOG;
-			cmn_err(CE_WARN,
-				"Enabling EXPERIMENTAL delayed logging feature "
-				"- use at your own risk.\n");
 		} else if (!strcmp(this_char, MNTOPT_NODELAYLOG)) {
 			mp->m_flags &= ~XFS_MOUNT_DELAYLOG;
 		} else if (!strcmp(this_char, "ihashsize")) {

From 6762b938eac878a30a90e770ac655874c36bc642 Mon Sep 17 00:00:00 2001
From: Kulikov Vasiliy <segooon@gmail.com>
Date: Sat, 30 Oct 2010 14:26:17 +0000
Subject: [PATCH 0415/1066] xfs: xfs_ioctl: fix information leak to userland

al_hreq is copied from userland.  If al_hreq.buflen is not properly aligned
then xfs_attr_list will ignore the last bytes of kbuf.  These bytes are
unitialized.  It leads to leaking of contents of kernel stack memory.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
---
 fs/xfs/linux-2.6/xfs_ioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index 2ea238f6d38e..ad442d9e392e 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -416,7 +416,7 @@ xfs_attrlist_by_handle(
 	if (IS_ERR(dentry))
 		return PTR_ERR(dentry);
 
-	kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL);
+	kbuf = kzalloc(al_hreq.buflen, GFP_KERNEL);
 	if (!kbuf)
 		goto out_dput;
 

From f83282a8ef799c0bdcb0c32971487087da1bc216 Mon Sep 17 00:00:00 2001
From: Dave Chinner <dchinner@redhat.com>
Date: Mon, 8 Nov 2010 08:55:04 +0000
Subject: [PATCH 0416/1066] xfs: fix per-ag reference counting in inode reclaim
 tree walking

The walk fails to decrement the per-ag reference count when the
non-blocking walk fails to obtain the per-ag reclaim lock, leading
to an assert failure on debug kernels when unmounting a filesystem.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
---
 fs/xfs/linux-2.6/xfs_sync.c | 1 +
 fs/xfs/xfs_mount.c          | 1 +
 2 files changed, 2 insertions(+)

diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index 37d33254981d..afb0d7cfad1c 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -853,6 +853,7 @@ restart:
 		if (trylock) {
 			if (!mutex_trylock(&pag->pag_ici_reclaim_lock)) {
 				skipped++;
+				xfs_perag_put(pag);
 				continue;
 			}
 			first_index = pag->pag_ici_reclaim_cursor;
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index b1498ab5a399..19e9dfa1c254 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -275,6 +275,7 @@ xfs_free_perag(
 		pag = radix_tree_delete(&mp->m_perag_tree, agno);
 		spin_unlock(&mp->m_perag_lock);
 		ASSERT(pag);
+		ASSERT(atomic_read(&pag->pag_ref) == 0);
 		call_rcu(&pag->rcu_head, __xfs_free_perag);
 	}
 }

From bfe2741967eaa3434fa9b3d8f24b1422d4540e7d Mon Sep 17 00:00:00 2001
From: Dave Chinner <dchinner@redhat.com>
Date: Mon, 8 Nov 2010 08:55:05 +0000
Subject: [PATCH 0417/1066] xfs: move delayed write buffer trace

The delayed write buffer split trace currently issues a trace for
every buffer it scans. These buffers are not necessarily queued for
delayed write. Indeed, when buffers are pinned, there can be
thousands of traces of buffers that aren't actually queued for
delayed write and the ones that are are lost in the noise. Move the
trace point to record only buffers that are split out for IO to be
issued on.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
---
 fs/xfs/linux-2.6/xfs_buf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 63fd2c07cb57..aa1d353def29 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -1781,7 +1781,6 @@ xfs_buf_delwri_split(
 	INIT_LIST_HEAD(list);
 	spin_lock(dwlk);
 	list_for_each_entry_safe(bp, n, dwq, b_list) {
-		trace_xfs_buf_delwri_split(bp, _RET_IP_);
 		ASSERT(bp->b_flags & XBF_DELWRI);
 
 		if (!XFS_BUF_ISPINNED(bp) && !xfs_buf_cond_lock(bp)) {
@@ -1795,6 +1794,7 @@ xfs_buf_delwri_split(
 					 _XBF_RUN_QUEUES);
 			bp->b_flags |= XBF_WRITE;
 			list_move_tail(&bp->b_list, list);
+			trace_xfs_buf_delwri_split(bp, _RET_IP_);
 		} else
 			skipped++;
 	}

From 785ce41805ea7b6a9b2775ed9f4cf10cd7a90c03 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Sat, 6 Nov 2010 11:42:44 +0000
Subject: [PATCH 0418/1066] xfs: tell lockdep about parent iolock usage in
 filestreams

The filestreams code may take the iolock on the parent inode while
holding it on a child.  This is the only place in XFS where we take
both the child and parent iolock, so just telling lockdep about it
is enough.  The lock flag required for that was already added as
part of the ilock lockdep annotations and unused so far.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
---
 fs/xfs/xfs_filestream.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c
index 9b715dce5699..9124425b7f2f 100644
--- a/fs/xfs/xfs_filestream.c
+++ b/fs/xfs/xfs_filestream.c
@@ -744,9 +744,15 @@ xfs_filestream_new_ag(
 	 * If the file's parent directory is known, take its iolock in exclusive
 	 * mode to prevent two sibling files from racing each other to migrate
 	 * themselves and their parent to different AGs.
+	 *
+	 * Note that we lock the parent directory iolock inside the child
+	 * iolock here.  That's fine as we never hold both parent and child
+	 * iolock in any other place.  This is different from the ilock,
+	 * which requires locking of the child after the parent for namespace
+	 * operations.
 	 */
 	if (pip)
-		xfs_ilock(pip, XFS_IOLOCK_EXCL);
+		xfs_ilock(pip, XFS_IOLOCK_EXCL | XFS_IOLOCK_PARENT);
 
 	/*
 	 * A new AG needs to be found for the file.  If the file's parent

From 5d2bf8a55e03b0e59ed5a4ac2ff7f9ee3ba7e40d Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Sat, 6 Nov 2010 11:42:56 +0000
Subject: [PATCH 0419/1066] xfs: fix a few compiler warnings with
 CONFIG_XFS_QUOTA=n

Andi Kleen reported that gcc-4.5 gives lots of warnings for him
inside the XFS code.  It turned out most of them are due to the
quota stubs beeing macros, and gcc now complaining about macros
evaluating to 0 that are not assigned to variables.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
---
 fs/xfs/xfs_quota.h | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/fs/xfs/xfs_quota.h b/fs/xfs/xfs_quota.h
index e0e64b113bd6..9bb6eda4cd21 100644
--- a/fs/xfs/xfs_quota.h
+++ b/fs/xfs/xfs_quota.h
@@ -346,8 +346,17 @@ xfs_qm_vop_dqalloc(struct xfs_inode *ip, uid_t uid, gid_t gid, prid_t prid,
 #define xfs_trans_mod_dquot_byino(tp, ip, fields, delta)
 #define xfs_trans_apply_dquot_deltas(tp)
 #define xfs_trans_unreserve_and_mod_dquots(tp)
-#define xfs_trans_reserve_quota_nblks(tp, ip, nblks, ninos, flags)	(0)
-#define xfs_trans_reserve_quota_bydquots(tp, mp, u, g, nb, ni, fl)	(0)
+static inline int xfs_trans_reserve_quota_nblks(struct xfs_trans *tp,
+		struct xfs_inode *ip, long nblks, long ninos, uint flags)
+{
+	return 0;
+}
+static inline int xfs_trans_reserve_quota_bydquots(struct xfs_trans *tp,
+		struct xfs_mount *mp, struct xfs_dquot *udqp,
+		struct xfs_dquot *gdqp, long nblks, long nions, uint flags)
+{
+	return 0;
+}
 #define xfs_qm_vop_create_dqattach(tp, ip, u, g)
 #define xfs_qm_vop_rename_dqattach(it)					(0)
 #define xfs_qm_vop_chown(tp, ip, old, new)				(NULL)
@@ -357,11 +366,14 @@ xfs_qm_vop_dqalloc(struct xfs_inode *ip, uid_t uid, gid_t gid, prid_t prid,
 #define xfs_qm_dqdetach(ip)
 #define xfs_qm_dqrele(d)
 #define xfs_qm_statvfs(ip, s)
-#define xfs_qm_sync(mp, fl)						(0)
+static inline int xfs_qm_sync(struct xfs_mount *mp, int flags)
+{
+	return 0;
+}
 #define xfs_qm_newmount(mp, a, b)					(0)
 #define xfs_qm_mount_quotas(mp)
 #define xfs_qm_unmount(mp)
-#define xfs_qm_unmount_quotas(mp)					(0)
+#define xfs_qm_unmount_quotas(mp)
 #endif /* CONFIG_XFS_QUOTA */
 
 #define xfs_trans_unreserve_quota_nblks(tp, ip, nblks, ninos, flags) \

From c6f6cd0608b1826ee1797cf57a808416e4bdb806 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Sat, 6 Nov 2010 11:43:08 +0000
Subject: [PATCH 0420/1066] xfs: use hlist_add_fake

XFS does not need it's inodes to actuall be hashed in the VFS inode
cache, but we require the inode to be marked hashed for the
writeback code to work.

Insted of using insert_inode_hash, which requires a second
inode_lock roundtrip after the partial merge of the inode
scalability patches in 2.6.37-rc simply use the new hlist_add_fake
helper to mark it hashed without requiring a lock or touching a
global cache line.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
---
 fs/xfs/linux-2.6/xfs_iops.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 96107efc0c61..94d5fd6a2973 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -762,7 +762,8 @@ xfs_setup_inode(
 	inode->i_state = I_NEW;
 
 	inode_sb_list_add(inode);
-	insert_inode_hash(inode);
+	/* make the inode look hashed for the writeback code */
+	hlist_add_fake(&inode->i_hash);
 
 	inode->i_mode	= ip->i_d.di_mode;
 	inode->i_nlink	= ip->i_d.di_nlink;

From fe10ae53384e48c51996941b7720ee16995cbcb7 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segooon@gmail.com>
Date: Wed, 10 Nov 2010 10:14:33 -0800
Subject: [PATCH 0421/1066] net: ax25: fix information leak to userland

Sometimes ax25_getname() doesn't initialize all members of fsa_digipeater
field of fsa struct, also the struct has padding bytes between
sax25_call and sax25_ndigis fields.  This structure is then copied to
userland.  It leads to leaking of contents of kernel stack memory.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ax25/af_ax25.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 26eaebf4aaa9..bb86d2932394 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -1392,6 +1392,7 @@ static int ax25_getname(struct socket *sock, struct sockaddr *uaddr,
 	ax25_cb *ax25;
 	int err = 0;
 
+	memset(fsa, 0, sizeof(fsa));
 	lock_sock(sk);
 	ax25 = ax25_sk(sk);
 
@@ -1403,7 +1404,6 @@ static int ax25_getname(struct socket *sock, struct sockaddr *uaddr,
 
 		fsa->fsa_ax25.sax25_family = AF_AX25;
 		fsa->fsa_ax25.sax25_call   = ax25->dest_addr;
-		fsa->fsa_ax25.sax25_ndigis = 0;
 
 		if (ax25->digipeat != NULL) {
 			ndigi = ax25->digipeat->ndigi;

From 57fe93b374a6b8711995c2d466c502af9f3a08bb Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 10 Nov 2010 10:38:24 -0800
Subject: [PATCH 0422/1066] filter: make sure filters dont read uninitialized
 memory

There is a possibility malicious users can get limited information about
uninitialized stack mem array. Even if sk_run_filter() result is bound
to packet length (0 .. 65535), we could imagine this can be used by
hostile user.

Initializing mem[] array, like Dan Rosenberg suggested in his patch is
expensive since most filters dont even use this array.

Its hard to make the filter validation in sk_chk_filter(), because of
the jumps. This might be done later.

In this patch, I use a bitmap (a single long var) so that only filters
using mem[] loads/stores pay the price of added security checks.

For other filters, additional cost is a single instruction.

[ Since we access fentry->k a lot now, cache it in a local variable
  and mark filter entry pointer as const. -DaveM ]

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/filter.c | 64 ++++++++++++++++++++++++++---------------------
 1 file changed, 35 insertions(+), 29 deletions(-)

diff --git a/net/core/filter.c b/net/core/filter.c
index 7beaec36b541..23e9b2a6b4c8 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -112,39 +112,41 @@ EXPORT_SYMBOL(sk_filter);
  */
 unsigned int sk_run_filter(struct sk_buff *skb, struct sock_filter *filter, int flen)
 {
-	struct sock_filter *fentry;	/* We walk down these */
 	void *ptr;
 	u32 A = 0;			/* Accumulator */
 	u32 X = 0;			/* Index Register */
 	u32 mem[BPF_MEMWORDS];		/* Scratch Memory Store */
+	unsigned long memvalid = 0;
 	u32 tmp;
 	int k;
 	int pc;
 
+	BUILD_BUG_ON(BPF_MEMWORDS > BITS_PER_LONG);
 	/*
 	 * Process array of filter instructions.
 	 */
 	for (pc = 0; pc < flen; pc++) {
-		fentry = &filter[pc];
+		const struct sock_filter *fentry = &filter[pc];
+		u32 f_k = fentry->k;
 
 		switch (fentry->code) {
 		case BPF_S_ALU_ADD_X:
 			A += X;
 			continue;
 		case BPF_S_ALU_ADD_K:
-			A += fentry->k;
+			A += f_k;
 			continue;
 		case BPF_S_ALU_SUB_X:
 			A -= X;
 			continue;
 		case BPF_S_ALU_SUB_K:
-			A -= fentry->k;
+			A -= f_k;
 			continue;
 		case BPF_S_ALU_MUL_X:
 			A *= X;
 			continue;
 		case BPF_S_ALU_MUL_K:
-			A *= fentry->k;
+			A *= f_k;
 			continue;
 		case BPF_S_ALU_DIV_X:
 			if (X == 0)
@@ -152,49 +154,49 @@ unsigned int sk_run_filter(struct sk_buff *skb, struct sock_filter *filter, int
 			A /= X;
 			continue;
 		case BPF_S_ALU_DIV_K:
-			A /= fentry->k;
+			A /= f_k;
 			continue;
 		case BPF_S_ALU_AND_X:
 			A &= X;
 			continue;
 		case BPF_S_ALU_AND_K:
-			A &= fentry->k;
+			A &= f_k;
 			continue;
 		case BPF_S_ALU_OR_X:
 			A |= X;
 			continue;
 		case BPF_S_ALU_OR_K:
-			A |= fentry->k;
+			A |= f_k;
 			continue;
 		case BPF_S_ALU_LSH_X:
 			A <<= X;
 			continue;
 		case BPF_S_ALU_LSH_K:
-			A <<= fentry->k;
+			A <<= f_k;
 			continue;
 		case BPF_S_ALU_RSH_X:
 			A >>= X;
 			continue;
 		case BPF_S_ALU_RSH_K:
-			A >>= fentry->k;
+			A >>= f_k;
 			continue;
 		case BPF_S_ALU_NEG:
 			A = -A;
 			continue;
 		case BPF_S_JMP_JA:
-			pc += fentry->k;
+			pc += f_k;
 			continue;
 		case BPF_S_JMP_JGT_K:
-			pc += (A > fentry->k) ? fentry->jt : fentry->jf;
+			pc += (A > f_k) ? fentry->jt : fentry->jf;
 			continue;
 		case BPF_S_JMP_JGE_K:
-			pc += (A >= fentry->k) ? fentry->jt : fentry->jf;
+			pc += (A >= f_k) ? fentry->jt : fentry->jf;
 			continue;
 		case BPF_S_JMP_JEQ_K:
-			pc += (A == fentry->k) ? fentry->jt : fentry->jf;
+			pc += (A == f_k) ? fentry->jt : fentry->jf;
 			continue;
 		case BPF_S_JMP_JSET_K:
-			pc += (A & fentry->k) ? fentry->jt : fentry->jf;
+			pc += (A & f_k) ? fentry->jt : fentry->jf;
 			continue;
 		case BPF_S_JMP_JGT_X:
 			pc += (A > X) ? fentry->jt : fentry->jf;
@@ -209,7 +211,7 @@ unsigned int sk_run_filter(struct sk_buff *skb, struct sock_filter *filter, int
 			pc += (A & X) ? fentry->jt : fentry->jf;
 			continue;
 		case BPF_S_LD_W_ABS:
-			k = fentry->k;
+			k = f_k;
 load_w:
 			ptr = load_pointer(skb, k, 4, &tmp);
 			if (ptr != NULL) {
@@ -218,7 +220,7 @@ load_w:
 			}
 			break;
 		case BPF_S_LD_H_ABS:
-			k = fentry->k;
+			k = f_k;
 load_h:
 			ptr = load_pointer(skb, k, 2, &tmp);
 			if (ptr != NULL) {
@@ -227,7 +229,7 @@ load_h:
 			}
 			break;
 		case BPF_S_LD_B_ABS:
-			k = fentry->k;
+			k = f_k;
 load_b:
 			ptr = load_pointer(skb, k, 1, &tmp);
 			if (ptr != NULL) {
@@ -242,32 +244,34 @@ load_b:
 			X = skb->len;
 			continue;
 		case BPF_S_LD_W_IND:
-			k = X + fentry->k;
+			k = X + f_k;
 			goto load_w;
 		case BPF_S_LD_H_IND:
-			k = X + fentry->k;
+			k = X + f_k;
 			goto load_h;
 		case BPF_S_LD_B_IND:
-			k = X + fentry->k;
+			k = X + f_k;
 			goto load_b;
 		case BPF_S_LDX_B_MSH:
-			ptr = load_pointer(skb, fentry->k, 1, &tmp);
+			ptr = load_pointer(skb, f_k, 1, &tmp);
 			if (ptr != NULL) {
 				X = (*(u8 *)ptr & 0xf) << 2;
 				continue;
 			}
 			return 0;
 		case BPF_S_LD_IMM:
-			A = fentry->k;
+			A = f_k;
 			continue;
 		case BPF_S_LDX_IMM:
-			X = fentry->k;
+			X = f_k;
 			continue;
 		case BPF_S_LD_MEM:
-			A = mem[fentry->k];
+			A = (memvalid & (1UL << f_k)) ?
+				mem[f_k] : 0;
 			continue;
 		case BPF_S_LDX_MEM:
-			X = mem[fentry->k];
+			X = (memvalid & (1UL << f_k)) ?
+				mem[f_k] : 0;
 			continue;
 		case BPF_S_MISC_TAX:
 			X = A;
@@ -276,14 +280,16 @@ load_b:
 			A = X;
 			continue;
 		case BPF_S_RET_K:
-			return fentry->k;
+			return f_k;
 		case BPF_S_RET_A:
 			return A;
 		case BPF_S_ST:
-			mem[fentry->k] = A;
+			memvalid |= 1UL << f_k;
+			mem[f_k] = A;
 			continue;
 		case BPF_S_STX:
-			mem[fentry->k] = X;
+			memvalid |= 1UL << f_k;
+			mem[f_k] = X;
 			continue;
 		default:
 			WARN_ON(1);

From 3df057ac9afe83c4af84016df3baf3a0eb1d3d33 Mon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <bfields@redhat.com>
Date: Wed, 3 Nov 2010 16:49:44 -0400
Subject: [PATCH 0423/1066] locks: fix leak on merging leases

We must also free the passed-in lease in the case it wasn't used because
an existing lease was upgrade/downgraded or already existed.

Note the nfsd caller doesn't care because it's fl_change callback
returns an error in those cases.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
---
 fs/locks.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/fs/locks.c b/fs/locks.c
index 65765cb6afed..61c22f722050 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -1504,7 +1504,7 @@ static int do_fcntl_delete_lease(struct file *filp)
 
 static int do_fcntl_add_lease(unsigned int fd, struct file *filp, long arg)
 {
-	struct file_lock *fl;
+	struct file_lock *fl, *ret;
 	struct fasync_struct *new;
 	struct inode *inode = filp->f_path.dentry->d_inode;
 	int error;
@@ -1518,6 +1518,7 @@ static int do_fcntl_add_lease(unsigned int fd, struct file *filp, long arg)
 		locks_free_lock(fl);
 		return -ENOMEM;
 	}
+	ret = fl;
 	lock_flocks();
 	error = __vfs_setlease(filp, arg, &fl);
 	if (error) {
@@ -1525,6 +1526,8 @@ static int do_fcntl_add_lease(unsigned int fd, struct file *filp, long arg)
 		locks_free_lock(fl);
 		goto out_free_fasync;
 	}
+	if (ret != fl)
+		locks_free_lock(fl);
 
 	/*
 	 * fasync_insert_entry() returns the old entry if any.
@@ -1532,7 +1535,7 @@ static int do_fcntl_add_lease(unsigned int fd, struct file *filp, long arg)
 	 * inserted it into the fasync list. Clear new so that
 	 * we don't release it here.
 	 */
-	if (!fasync_insert_entry(fd, filp, &fl->fl_fasync, new))
+	if (!fasync_insert_entry(fd, filp, &ret->fl_fasync, new))
 		new = NULL;
 
 	if (error < 0) {

From 8896b93f42459b18b145c69d399b62870df48061 Mon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <bfields@redhat.com>
Date: Wed, 3 Nov 2010 18:09:18 -0400
Subject: [PATCH 0424/1066] locks: remove dead lease error-handling code

A minor oversight from f7347ce4ee7c65415f84be915c018473e7076f31,
"fasync: re-organize fasync entry insertion to allow it under a
spinlock": this cleanup-on-error was only needed to handle -ENOMEM.  Now
that we're preallocating it's unneeded.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
---
 fs/locks.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/fs/locks.c b/fs/locks.c
index 61c22f722050..0e62dd35d088 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -1506,7 +1506,6 @@ static int do_fcntl_add_lease(unsigned int fd, struct file *filp, long arg)
 {
 	struct file_lock *fl, *ret;
 	struct fasync_struct *new;
-	struct inode *inode = filp->f_path.dentry->d_inode;
 	int error;
 
 	fl = lease_alloc(filp, arg);
@@ -1520,7 +1519,7 @@ static int do_fcntl_add_lease(unsigned int fd, struct file *filp, long arg)
 	}
 	ret = fl;
 	lock_flocks();
-	error = __vfs_setlease(filp, arg, &fl);
+	error = __vfs_setlease(filp, arg, &ret);
 	if (error) {
 		unlock_flocks();
 		locks_free_lock(fl);
@@ -1538,14 +1537,7 @@ static int do_fcntl_add_lease(unsigned int fd, struct file *filp, long arg)
 	if (!fasync_insert_entry(fd, filp, &ret->fl_fasync, new))
 		new = NULL;
 
-	if (error < 0) {
-		/* remove lease just inserted by setlease */
-		fl->fl_type = F_UNLCK | F_INPROGRESS;
-		fl->fl_break_time = jiffies - 10;
-		time_out_leases(inode);
-	} else {
-		error = __f_setown(filp, task_pid(current), PIDTYPE_PID, 0);
-	}
+	error = __f_setown(filp, task_pid(current), PIDTYPE_PID, 0);
 	unlock_flocks();
 
 out_free_fasync:

From 67286640f638f5ad41a946b9a3dc75327950248f Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segooon@gmail.com>
Date: Wed, 10 Nov 2010 12:09:10 -0800
Subject: [PATCH 0425/1066] net: packet: fix information leak to userland

packet_getname_spkt() doesn't initialize all members of sa_data field of
sockaddr struct if strlen(dev->name) < 13.  This structure is then copied
to userland.  It leads to leaking of contents of kernel stack memory.
We have to fully fill sa_data with strncpy() instead of strlcpy().

The same with packet_getname(): it doesn't initialize sll_pkttype field of
sockaddr_ll.  Set it to zero.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/packet/af_packet.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 3616f27b9d46..0856a13cb53d 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1719,7 +1719,7 @@ static int packet_getname_spkt(struct socket *sock, struct sockaddr *uaddr,
 	rcu_read_lock();
 	dev = dev_get_by_index_rcu(sock_net(sk), pkt_sk(sk)->ifindex);
 	if (dev)
-		strlcpy(uaddr->sa_data, dev->name, 15);
+		strncpy(uaddr->sa_data, dev->name, 14);
 	else
 		memset(uaddr->sa_data, 0, 14);
 	rcu_read_unlock();
@@ -1742,6 +1742,7 @@ static int packet_getname(struct socket *sock, struct sockaddr *uaddr,
 	sll->sll_family = AF_PACKET;
 	sll->sll_ifindex = po->ifindex;
 	sll->sll_protocol = po->num;
+	sll->sll_pkttype = 0;
 	rcu_read_lock();
 	dev = dev_get_by_index_rcu(sock_net(sk), po->ifindex);
 	if (dev) {

From 8d987e5c75107ca7515fa19e857cfa24aab6ec8f Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Tue, 9 Nov 2010 23:24:26 +0000
Subject: [PATCH 0426/1066] net: avoid limits overflow

Robin Holt tried to boot a 16TB machine and found some limits were
reached : sysctl_tcp_mem[2], sysctl_udp_mem[2]

We can switch infrastructure to use long "instead" of "int", now
atomic_long_t primitives are available for free.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Robin Holt <holt@sgi.com>
Reviewed-by: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/dn.h               |  2 +-
 include/net/sock.h             |  4 ++--
 include/net/tcp.h              |  6 +++---
 include/net/udp.h              |  4 ++--
 net/core/sock.c                | 14 +++++++-------
 net/decnet/af_decnet.c         |  2 +-
 net/decnet/sysctl_net_decnet.c |  4 ++--
 net/ipv4/proc.c                |  8 ++++----
 net/ipv4/sysctl_net_ipv4.c     |  5 ++---
 net/ipv4/tcp.c                 |  4 ++--
 net/ipv4/tcp_input.c           | 11 +++++++----
 net/ipv4/udp.c                 |  4 ++--
 net/sctp/protocol.c            |  2 +-
 net/sctp/socket.c              |  4 ++--
 net/sctp/sysctl.c              |  4 ++--
 15 files changed, 40 insertions(+), 38 deletions(-)

diff --git a/include/net/dn.h b/include/net/dn.h
index e5469f7b67a3..a514a3cf4573 100644
--- a/include/net/dn.h
+++ b/include/net/dn.h
@@ -225,7 +225,7 @@ extern int decnet_di_count;
 extern int decnet_dr_count;
 extern int decnet_no_fc_max_cwnd;
 
-extern int sysctl_decnet_mem[3];
+extern long sysctl_decnet_mem[3];
 extern int sysctl_decnet_wmem[3];
 extern int sysctl_decnet_rmem[3];
 
diff --git a/include/net/sock.h b/include/net/sock.h
index c7a736228ca2..a6338d039857 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -762,7 +762,7 @@ struct proto {
 
 	/* Memory pressure */
 	void			(*enter_memory_pressure)(struct sock *sk);
-	atomic_t		*memory_allocated;	/* Current allocated memory. */
+	atomic_long_t		*memory_allocated;	/* Current allocated memory. */
 	struct percpu_counter	*sockets_allocated;	/* Current number of sockets. */
 	/*
 	 * Pressure flag: try to collapse.
@@ -771,7 +771,7 @@ struct proto {
 	 * is strict, actions are advisory and have some latency.
 	 */
 	int			*memory_pressure;
-	int			*sysctl_mem;
+	long			*sysctl_mem;
 	int			*sysctl_wmem;
 	int			*sysctl_rmem;
 	int			max_header;
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 4fee0424af7e..e36c874c7fb1 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -224,7 +224,7 @@ extern int sysctl_tcp_fack;
 extern int sysctl_tcp_reordering;
 extern int sysctl_tcp_ecn;
 extern int sysctl_tcp_dsack;
-extern int sysctl_tcp_mem[3];
+extern long sysctl_tcp_mem[3];
 extern int sysctl_tcp_wmem[3];
 extern int sysctl_tcp_rmem[3];
 extern int sysctl_tcp_app_win;
@@ -247,7 +247,7 @@ extern int sysctl_tcp_cookie_size;
 extern int sysctl_tcp_thin_linear_timeouts;
 extern int sysctl_tcp_thin_dupack;
 
-extern atomic_t tcp_memory_allocated;
+extern atomic_long_t tcp_memory_allocated;
 extern struct percpu_counter tcp_sockets_allocated;
 extern int tcp_memory_pressure;
 
@@ -280,7 +280,7 @@ static inline bool tcp_too_many_orphans(struct sock *sk, int shift)
 	}
 
 	if (sk->sk_wmem_queued > SOCK_MIN_SNDBUF &&
-	    atomic_read(&tcp_memory_allocated) > sysctl_tcp_mem[2])
+	    atomic_long_read(&tcp_memory_allocated) > sysctl_tcp_mem[2])
 		return true;
 	return false;
 }
diff --git a/include/net/udp.h b/include/net/udp.h
index 200b82848c9a..bb967dd59bf7 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -105,10 +105,10 @@ static inline struct udp_hslot *udp_hashslot2(struct udp_table *table,
 
 extern struct proto udp_prot;
 
-extern atomic_t udp_memory_allocated;
+extern atomic_long_t udp_memory_allocated;
 
 /* sysctl variables for udp */
-extern int sysctl_udp_mem[3];
+extern long sysctl_udp_mem[3];
 extern int sysctl_udp_rmem_min;
 extern int sysctl_udp_wmem_min;
 
diff --git a/net/core/sock.c b/net/core/sock.c
index 3eed5424e659..fb6080111461 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1653,10 +1653,10 @@ int __sk_mem_schedule(struct sock *sk, int size, int kind)
 {
 	struct proto *prot = sk->sk_prot;
 	int amt = sk_mem_pages(size);
-	int allocated;
+	long allocated;
 
 	sk->sk_forward_alloc += amt * SK_MEM_QUANTUM;
-	allocated = atomic_add_return(amt, prot->memory_allocated);
+	allocated = atomic_long_add_return(amt, prot->memory_allocated);
 
 	/* Under limit. */
 	if (allocated <= prot->sysctl_mem[0]) {
@@ -1714,7 +1714,7 @@ suppress_allocation:
 
 	/* Alas. Undo changes. */
 	sk->sk_forward_alloc -= amt * SK_MEM_QUANTUM;
-	atomic_sub(amt, prot->memory_allocated);
+	atomic_long_sub(amt, prot->memory_allocated);
 	return 0;
 }
 EXPORT_SYMBOL(__sk_mem_schedule);
@@ -1727,12 +1727,12 @@ void __sk_mem_reclaim(struct sock *sk)
 {
 	struct proto *prot = sk->sk_prot;
 
-	atomic_sub(sk->sk_forward_alloc >> SK_MEM_QUANTUM_SHIFT,
+	atomic_long_sub(sk->sk_forward_alloc >> SK_MEM_QUANTUM_SHIFT,
 		   prot->memory_allocated);
 	sk->sk_forward_alloc &= SK_MEM_QUANTUM - 1;
 
 	if (prot->memory_pressure && *prot->memory_pressure &&
-	    (atomic_read(prot->memory_allocated) < prot->sysctl_mem[0]))
+	    (atomic_long_read(prot->memory_allocated) < prot->sysctl_mem[0]))
 		*prot->memory_pressure = 0;
 }
 EXPORT_SYMBOL(__sk_mem_reclaim);
@@ -2452,12 +2452,12 @@ static char proto_method_implemented(const void *method)
 
 static void proto_seq_printf(struct seq_file *seq, struct proto *proto)
 {
-	seq_printf(seq, "%-9s %4u %6d  %6d   %-3s %6u   %-3s  %-10s "
+	seq_printf(seq, "%-9s %4u %6d  %6ld   %-3s %6u   %-3s  %-10s "
 			"%2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c\n",
 		   proto->name,
 		   proto->obj_size,
 		   sock_prot_inuse_get(seq_file_net(seq), proto),
-		   proto->memory_allocated != NULL ? atomic_read(proto->memory_allocated) : -1,
+		   proto->memory_allocated != NULL ? atomic_long_read(proto->memory_allocated) : -1L,
 		   proto->memory_pressure != NULL ? *proto->memory_pressure ? "yes" : "no" : "NI",
 		   proto->max_header,
 		   proto->slab == NULL ? "no" : "yes",
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index d6b93d19790f..a76b78de679f 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -155,7 +155,7 @@ static const struct proto_ops dn_proto_ops;
 static DEFINE_RWLOCK(dn_hash_lock);
 static struct hlist_head dn_sk_hash[DN_SK_HASH_SIZE];
 static struct hlist_head dn_wild_sk;
-static atomic_t decnet_memory_allocated;
+static atomic_long_t decnet_memory_allocated;
 
 static int __dn_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen, int flags);
 static int __dn_getsockopt(struct socket *sock, int level, int optname, char __user *optval, int __user *optlen, int flags);
diff --git a/net/decnet/sysctl_net_decnet.c b/net/decnet/sysctl_net_decnet.c
index be3eb8e23288..28f8b5e5f73b 100644
--- a/net/decnet/sysctl_net_decnet.c
+++ b/net/decnet/sysctl_net_decnet.c
@@ -38,7 +38,7 @@ int decnet_log_martians = 1;
 int decnet_no_fc_max_cwnd = NSP_MIN_WINDOW;
 
 /* Reasonable defaults, I hope, based on tcp's defaults */
-int sysctl_decnet_mem[3] = { 768 << 3, 1024 << 3, 1536 << 3 };
+long sysctl_decnet_mem[3] = { 768 << 3, 1024 << 3, 1536 << 3 };
 int sysctl_decnet_wmem[3] = { 4 * 1024, 16 * 1024, 128 * 1024 };
 int sysctl_decnet_rmem[3] = { 4 * 1024, 87380, 87380 * 2 };
 
@@ -324,7 +324,7 @@ static ctl_table dn_table[] = {
 		.data = &sysctl_decnet_mem,
 		.maxlen = sizeof(sysctl_decnet_mem),
 		.mode = 0644,
-		.proc_handler = proc_dointvec,
+		.proc_handler = proc_doulongvec_minmax
 	},
 	{
 		.procname = "decnet_rmem",
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index 4ae1f203f7cb..1b48eb1ed453 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -59,13 +59,13 @@ static int sockstat_seq_show(struct seq_file *seq, void *v)
 	local_bh_enable();
 
 	socket_seq_show(seq);
-	seq_printf(seq, "TCP: inuse %d orphan %d tw %d alloc %d mem %d\n",
+	seq_printf(seq, "TCP: inuse %d orphan %d tw %d alloc %d mem %ld\n",
 		   sock_prot_inuse_get(net, &tcp_prot), orphans,
 		   tcp_death_row.tw_count, sockets,
-		   atomic_read(&tcp_memory_allocated));
-	seq_printf(seq, "UDP: inuse %d mem %d\n",
+		   atomic_long_read(&tcp_memory_allocated));
+	seq_printf(seq, "UDP: inuse %d mem %ld\n",
 		   sock_prot_inuse_get(net, &udp_prot),
-		   atomic_read(&udp_memory_allocated));
+		   atomic_long_read(&udp_memory_allocated));
 	seq_printf(seq, "UDPLITE: inuse %d\n",
 		   sock_prot_inuse_get(net, &udplite_prot));
 	seq_printf(seq, "RAW: inuse %d\n",
diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
index d96c1da4b17c..e91911d7aae2 100644
--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -398,7 +398,7 @@ static struct ctl_table ipv4_table[] = {
 		.data		= &sysctl_tcp_mem,
 		.maxlen		= sizeof(sysctl_tcp_mem),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec
+		.proc_handler	= proc_doulongvec_minmax
 	},
 	{
 		.procname	= "tcp_wmem",
@@ -602,8 +602,7 @@ static struct ctl_table ipv4_table[] = {
 		.data		= &sysctl_udp_mem,
 		.maxlen		= sizeof(sysctl_udp_mem),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &zero
+		.proc_handler	= proc_doulongvec_minmax,
 	},
 	{
 		.procname	= "udp_rmem_min",
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 1664a0590bb8..245603c4ad48 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -282,7 +282,7 @@ int sysctl_tcp_fin_timeout __read_mostly = TCP_FIN_TIMEOUT;
 struct percpu_counter tcp_orphan_count;
 EXPORT_SYMBOL_GPL(tcp_orphan_count);
 
-int sysctl_tcp_mem[3] __read_mostly;
+long sysctl_tcp_mem[3] __read_mostly;
 int sysctl_tcp_wmem[3] __read_mostly;
 int sysctl_tcp_rmem[3] __read_mostly;
 
@@ -290,7 +290,7 @@ EXPORT_SYMBOL(sysctl_tcp_mem);
 EXPORT_SYMBOL(sysctl_tcp_rmem);
 EXPORT_SYMBOL(sysctl_tcp_wmem);
 
-atomic_t tcp_memory_allocated;	/* Current allocated memory. */
+atomic_long_t tcp_memory_allocated;	/* Current allocated memory. */
 EXPORT_SYMBOL(tcp_memory_allocated);
 
 /*
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 3357f69e353d..6d8ab1c4efc3 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -259,8 +259,11 @@ static void tcp_fixup_sndbuf(struct sock *sk)
 	int sndmem = tcp_sk(sk)->rx_opt.mss_clamp + MAX_TCP_HEADER + 16 +
 		     sizeof(struct sk_buff);
 
-	if (sk->sk_sndbuf < 3 * sndmem)
-		sk->sk_sndbuf = min(3 * sndmem, sysctl_tcp_wmem[2]);
+	if (sk->sk_sndbuf < 3 * sndmem) {
+		sk->sk_sndbuf = 3 * sndmem;
+		if (sk->sk_sndbuf > sysctl_tcp_wmem[2])
+			sk->sk_sndbuf = sysctl_tcp_wmem[2];
+	}
 }
 
 /* 2. Tuning advertised window (window_clamp, rcv_ssthresh)
@@ -396,7 +399,7 @@ static void tcp_clamp_window(struct sock *sk)
 	if (sk->sk_rcvbuf < sysctl_tcp_rmem[2] &&
 	    !(sk->sk_userlocks & SOCK_RCVBUF_LOCK) &&
 	    !tcp_memory_pressure &&
-	    atomic_read(&tcp_memory_allocated) < sysctl_tcp_mem[0]) {
+	    atomic_long_read(&tcp_memory_allocated) < sysctl_tcp_mem[0]) {
 		sk->sk_rcvbuf = min(atomic_read(&sk->sk_rmem_alloc),
 				    sysctl_tcp_rmem[2]);
 	}
@@ -4861,7 +4864,7 @@ static int tcp_should_expand_sndbuf(struct sock *sk)
 		return 0;
 
 	/* If we are under soft global TCP memory pressure, do not expand.  */
-	if (atomic_read(&tcp_memory_allocated) >= sysctl_tcp_mem[0])
+	if (atomic_long_read(&tcp_memory_allocated) >= sysctl_tcp_mem[0])
 		return 0;
 
 	/* If we filled the congestion window, do not expand.  */
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 28cb2d733a3c..5e0a3a582a59 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -110,7 +110,7 @@
 struct udp_table udp_table __read_mostly;
 EXPORT_SYMBOL(udp_table);
 
-int sysctl_udp_mem[3] __read_mostly;
+long sysctl_udp_mem[3] __read_mostly;
 EXPORT_SYMBOL(sysctl_udp_mem);
 
 int sysctl_udp_rmem_min __read_mostly;
@@ -119,7 +119,7 @@ EXPORT_SYMBOL(sysctl_udp_rmem_min);
 int sysctl_udp_wmem_min __read_mostly;
 EXPORT_SYMBOL(sysctl_udp_wmem_min);
 
-atomic_t udp_memory_allocated;
+atomic_long_t udp_memory_allocated;
 EXPORT_SYMBOL(udp_memory_allocated);
 
 #define MAX_UDP_PORTS 65536
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 1ef29c74d85e..e58f9476f29c 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -92,7 +92,7 @@ static struct sctp_af *sctp_af_v6_specific;
 struct kmem_cache *sctp_chunk_cachep __read_mostly;
 struct kmem_cache *sctp_bucket_cachep __read_mostly;
 
-int sysctl_sctp_mem[3];
+long sysctl_sctp_mem[3];
 int sysctl_sctp_rmem[3];
 int sysctl_sctp_wmem[3];
 
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index e34ca9cc1167..6bd554323a34 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -111,12 +111,12 @@ static void sctp_sock_migrate(struct sock *, struct sock *,
 static char *sctp_hmac_alg = SCTP_COOKIE_HMAC_ALG;
 
 extern struct kmem_cache *sctp_bucket_cachep;
-extern int sysctl_sctp_mem[3];
+extern long sysctl_sctp_mem[3];
 extern int sysctl_sctp_rmem[3];
 extern int sysctl_sctp_wmem[3];
 
 static int sctp_memory_pressure;
-static atomic_t sctp_memory_allocated;
+static atomic_long_t sctp_memory_allocated;
 struct percpu_counter sctp_sockets_allocated;
 
 static void sctp_enter_memory_pressure(struct sock *sk)
diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c
index 832590bbe0c0..50cb57f0919e 100644
--- a/net/sctp/sysctl.c
+++ b/net/sctp/sysctl.c
@@ -54,7 +54,7 @@ static int sack_timer_max = 500;
 static int addr_scope_max = 3; /* check sctp_scope_policy_t in include/net/sctp/constants.h for max entries */
 static int rwnd_scale_max = 16;
 
-extern int sysctl_sctp_mem[3];
+extern long sysctl_sctp_mem[3];
 extern int sysctl_sctp_rmem[3];
 extern int sysctl_sctp_wmem[3];
 
@@ -203,7 +203,7 @@ static ctl_table sctp_table[] = {
 		.data		= &sysctl_sctp_mem,
 		.maxlen		= sizeof(sysctl_sctp_mem),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
+		.proc_handler	= proc_doulongvec_minmax
 	},
 	{
 		.procname	= "sctp_rmem",

From 246c3fb16b08193837a8009ff15ef6908534ba71 Mon Sep 17 00:00:00 2001
From: "wzt.wzt@gmail.com" <wzt.wzt@gmail.com>
Date: Wed, 10 Nov 2010 11:31:55 +0800
Subject: [PATCH 0427/1066] APPARMOR: Fix memory leak of alloc_namespace()

policy->name is a substring of policy->hname, if prefix is not NULL, it will
allocted strlen(prefix) + strlen(name) + 3 bytes to policy->hname in policy_init().
use kzfree(ns->base.name) will casue memory leak if alloc_namespace() failed.

Signed-off-by: Zhitong Wang <zhitong.wangzt@alibaba-inc.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 security/apparmor/policy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/security/apparmor/policy.c b/security/apparmor/policy.c
index 52cc865f1464..4f0eadee78b8 100644
--- a/security/apparmor/policy.c
+++ b/security/apparmor/policy.c
@@ -306,7 +306,7 @@ static struct aa_namespace *alloc_namespace(const char *prefix,
 	return ns;
 
 fail_unconfined:
-	kzfree(ns->base.name);
+	kzfree(ns->base.hname);
 fail_ns:
 	kzfree(ns);
 	return NULL;

From a26d279ea87e9fef2cf8a44b371e48e6091975a6 Mon Sep 17 00:00:00 2001
From: "wzt.wzt@gmail.com" <wzt.wzt@gmail.com>
Date: Wed, 10 Nov 2010 16:05:15 +0800
Subject: [PATCH 0428/1066] APPARMOR: Fix memory leak of apparmor_init()

set_init_cxt() allocted sizeof(struct aa_task_cxt) bytes for cxt,
if register_security() failed, it will cause memory leak.

Signed-off-by: Zhitong Wang <zhitong.wangzt@alibaba-inc.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 security/apparmor/lsm.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c
index cf1de4462ccd..b7106f192b75 100644
--- a/security/apparmor/lsm.c
+++ b/security/apparmor/lsm.c
@@ -922,7 +922,7 @@ static int __init apparmor_init(void)
 	error = register_security(&apparmor_ops);
 	if (error) {
 		AA_ERROR("Unable to register AppArmor\n");
-		goto register_security_out;
+		goto set_init_cxt_out;
 	}
 
 	/* Report that AppArmor successfully initialized */
@@ -936,6 +936,9 @@ static int __init apparmor_init(void)
 
 	return error;
 
+set_init_cxt_out:
+	aa_free_task_context(current->real_cred->security);
+
 register_security_out:
 	aa_free_root_ns();
 
@@ -944,7 +947,6 @@ alloc_out:
 
 	apparmor_enabled = 0;
 	return error;
-
 }
 
 security_initcall(apparmor_init);

From ece413f59f257682de4a2e2e42af33b016af53f3 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Wed, 10 Nov 2010 21:39:11 +0000
Subject: [PATCH 0429/1066] xfs: remove incorrect assert in xfs_vm_writepage

In commit 20cb52ebd1b5ca6fa8a5d9b6b1392292f5ca8a45, titled
"xfs: simplify xfs_vm_writepage" I added an assert that any !mapped and
uptodate buffers are not dirty.  That asserts turns out to trigger a lot
when running fsx on filesystems with small block sizes.  The reason for
that is that the assert is simply incorrect.  !mapped and uptodate
just mean this buffer covers a hole, and whenever we do a set_page_dirty
we mark all blocks in the page dirty, no matter if they have data or
not.  So remove the assert, and update the comment above the condition
to match reality.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
---
 fs/xfs/linux-2.6/xfs_aops.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index c9af48fffcd7..7d287afccde5 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -1111,11 +1111,12 @@ xfs_vm_writepage(
 			uptodate = 0;
 
 		/*
-		 * A hole may still be marked uptodate because discard_buffer
-		 * leaves the flag set.
+		 * set_page_dirty dirties all buffers in a page, independent
+		 * of their state.  The dirty state however is entirely
+		 * meaningless for holes (!mapped && uptodate), so skip
+		 * buffers covering holes here.
 		 */
 		if (!buffer_mapped(bh) && buffer_uptodate(bh)) {
-			ASSERT(!buffer_dirty(bh));
 			imap_valid = 0;
 			continue;
 		}

From eed01528a45dc4138e9a08064b4b6cc1a9426899 Mon Sep 17 00:00:00 2001
From: Stephane Eranian <eranian@google.com>
Date: Tue, 26 Oct 2010 16:08:01 +0200
Subject: [PATCH 0430/1066] perf_events: Fix time tracking in samples

This patch corrects time tracking in samples. Without this patch
both time_enabled and time_running are bogus when user asks for
PERF_SAMPLE_READ.

One uses PERF_SAMPLE_READ to sample the values of other counters
in each sample. Because of multiplexing, it is necessary to know
both time_enabled, time_running to be able to scale counts correctly.

In this second version of the patch, we maintain a shadow
copy of ctx->time which allows us to compute ctx->time without
calling update_context_time() from NMI context. We avoid the
issue that update_context_time() must always be called with
ctx->lock held.

We do not keep shadow copies of the other event timings
because if the lead event is overflowing then it is active
and thus it's been scheduled in via event_sched_in() in
which case neither tstamp_stopped, tstamp_running can be modified.

This timing logic only applies to samples when PERF_SAMPLE_READ
is used.

Note that this patch does not address timing issues related
to sampling inheritance between tasks. This will be addressed
in a future patch.

With this patch, the libpfm4 example task_smpl now reports
correct counts (shown on 2.4GHz Core 2):

$ task_smpl -p 2400000000 -e unhalted_core_cycles:u,instructions_retired:u,baclears  noploop 5
noploop for 5 seconds
IIP:0x000000004006d6 PID:5596 TID:5596 TIME:466,210,211,430 STREAM_ID:33 PERIOD:2,400,000,000 ENA=1,010,157,814 RUN=1,010,157,814 NR=3
	2,400,000,254 unhalted_core_cycles:u (33)
	2,399,273,744 instructions_retired:u (34)
	53,340 baclears (35)

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4cc6e14b.1e07e30a.256e.5190@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/perf_event.h | 10 +++++++++
 kernel/perf_event.c        | 42 ++++++++++++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 8 deletions(-)

diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 057bf22a8323..40150f345982 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -747,6 +747,16 @@ struct perf_event {
 	u64				tstamp_running;
 	u64				tstamp_stopped;
 
+	/*
+	 * timestamp shadows the actual context timing but it can
+	 * be safely used in NMI interrupt context. It reflects the
+	 * context time as it was when the event was last scheduled in.
+	 *
+	 * ctx_time already accounts for ctx->timestamp. Therefore to
+	 * compute ctx_time for a sample, simply add perf_clock().
+	 */
+	u64				shadow_ctx_time;
+
 	struct perf_event_attr		attr;
 	struct hw_perf_event		hw;
 
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 517d827f4982..cb6c0d2af68f 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -674,6 +674,8 @@ event_sched_in(struct perf_event *event,
 
 	event->tstamp_running += ctx->time - event->tstamp_stopped;
 
+	event->shadow_ctx_time = ctx->time - ctx->timestamp;
+
 	if (!is_software_event(event))
 		cpuctx->active_oncpu++;
 	ctx->nr_active++;
@@ -3396,7 +3398,8 @@ static u32 perf_event_tid(struct perf_event *event, struct task_struct *p)
 }
 
 static void perf_output_read_one(struct perf_output_handle *handle,
-				 struct perf_event *event)
+				 struct perf_event *event,
+				 u64 enabled, u64 running)
 {
 	u64 read_format = event->attr.read_format;
 	u64 values[4];
@@ -3404,11 +3407,11 @@ static void perf_output_read_one(struct perf_output_handle *handle,
 
 	values[n++] = perf_event_count(event);
 	if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
-		values[n++] = event->total_time_enabled +
+		values[n++] = enabled +
 			atomic64_read(&event->child_total_time_enabled);
 	}
 	if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
-		values[n++] = event->total_time_running +
+		values[n++] = running +
 			atomic64_read(&event->child_total_time_running);
 	}
 	if (read_format & PERF_FORMAT_ID)
@@ -3421,7 +3424,8 @@ static void perf_output_read_one(struct perf_output_handle *handle,
  * XXX PERF_FORMAT_GROUP vs inherited events seems difficult.
  */
 static void perf_output_read_group(struct perf_output_handle *handle,
-			    struct perf_event *event)
+			    struct perf_event *event,
+			    u64 enabled, u64 running)
 {
 	struct perf_event *leader = event->group_leader, *sub;
 	u64 read_format = event->attr.read_format;
@@ -3431,10 +3435,10 @@ static void perf_output_read_group(struct perf_output_handle *handle,
 	values[n++] = 1 + leader->nr_siblings;
 
 	if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
-		values[n++] = leader->total_time_enabled;
+		values[n++] = enabled;
 
 	if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
-		values[n++] = leader->total_time_running;
+		values[n++] = running;
 
 	if (leader != event)
 		leader->pmu->read(leader);
@@ -3459,13 +3463,35 @@ static void perf_output_read_group(struct perf_output_handle *handle,
 	}
 }
 
+#define PERF_FORMAT_TOTAL_TIMES (PERF_FORMAT_TOTAL_TIME_ENABLED|\
+				 PERF_FORMAT_TOTAL_TIME_RUNNING)
+
 static void perf_output_read(struct perf_output_handle *handle,
 			     struct perf_event *event)
 {
+	u64 enabled = 0, running = 0, now, ctx_time;
+	u64 read_format = event->attr.read_format;
+
+	/*
+	 * compute total_time_enabled, total_time_running
+	 * based on snapshot values taken when the event
+	 * was last scheduled in.
+	 *
+	 * we cannot simply called update_context_time()
+	 * because of locking issue as we are called in
+	 * NMI context
+	 */
+	if (read_format & PERF_FORMAT_TOTAL_TIMES) {
+		now = perf_clock();
+		ctx_time = event->shadow_ctx_time + now;
+		enabled = ctx_time - event->tstamp_enabled;
+		running = ctx_time - event->tstamp_running;
+	}
+
 	if (event->attr.read_format & PERF_FORMAT_GROUP)
-		perf_output_read_group(handle, event);
+		perf_output_read_group(handle, event, enabled, running);
 	else
-		perf_output_read_one(handle, event);
+		perf_output_read_one(handle, event, enabled, running);
 }
 
 void perf_output_sample(struct perf_output_handle *handle,

From 034c6efa4616e5ff6253549e973e7fef12899324 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Mon, 1 Nov 2010 18:52:05 +0100
Subject: [PATCH 0431/1066] perf, amd: Use kmalloc_node(,__GFP_ZERO) for
 northbridge structure allocation

Jasper suggested we use the zeroing capability of the allocators
instead of calling memset ourselves. Add node affinity while we're at
it.

Reported-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_event_amd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index 46d58448c3af..e421b8cd6944 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -280,11 +280,11 @@ static struct amd_nb *amd_alloc_nb(int cpu, int nb_id)
 	struct amd_nb *nb;
 	int i;
 
-	nb = kmalloc(sizeof(struct amd_nb), GFP_KERNEL);
+	nb = kmalloc_node(sizeof(struct amd_nb), GFP_KERNEL | __GFP_ZERO,
+			  cpu_to_node(cpu));
 	if (!nb)
 		return NULL;
 
-	memset(nb, 0, sizeof(*nb));
 	nb->nb_id = nb_id;
 
 	/*

From aae6d3ddd8b90f5b2c8d79a2b914d1706d124193 Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Fri, 17 Sep 2010 15:02:32 -0700
Subject: [PATCH 0432/1066] sched: Use group weight, idle cpu metrics to fix
 imbalances during idle

Currently we consider a sched domain to be well balanced when the imbalance
is less than the domain's imablance_pct. As the number of cores and threads
are increasing, current values of imbalance_pct (for example 25% for a
NUMA domain) are not enough to detect imbalances like:

a) On a WSM-EP system (two sockets, each having 6 cores and 12 logical threads),
24 cpu-hogging tasks get scheduled as 13 on one socket and 11 on another
socket. Leading to an idle HT cpu.

b) On a hypothetial 2 socket NHM-EX system (each socket having 8 cores and
16 logical threads), 16 cpu-hogging tasks can get scheduled as 9 on one
socket and 7 on another socket. Leaving one core in a socket idle
whereas in another socket we have a core having both its HT siblings busy.

While this issue can be fixed by decreasing the domain's imbalance_pct
(by making it a function of number of logical cpus in the domain), it
can potentially cause more task migrations across sched groups in an
overloaded case.

Fix this by using imbalance_pct only during newly_idle and busy
load balancing. And during idle load balancing, check if there
is an imbalance in number of idle cpu's across the busiest and this
sched_group or if the busiest group has more tasks than its weight that
the idle cpu in this_group can pull.

Reported-by: Nikhil Rao <ncrao@google.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1284760952.2676.11.camel@sbsiddha-MOBL3.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/sched.h |  1 +
 kernel/sched.c        |  2 ++
 kernel/sched_fair.c   | 34 +++++++++++++++++++++++++++++++---
 3 files changed, 34 insertions(+), 3 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index d0036e52a24a..2c79e921a68b 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -862,6 +862,7 @@ struct sched_group {
 	 * single CPU.
 	 */
 	unsigned int cpu_power, cpu_power_orig;
+	unsigned int group_weight;
 
 	/*
 	 * The CPUs this group covers.
diff --git a/kernel/sched.c b/kernel/sched.c
index aa14a56f9d03..36a088018fe0 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -6960,6 +6960,8 @@ static void init_sched_groups_power(int cpu, struct sched_domain *sd)
 	if (cpu != group_first_cpu(sd->groups))
 		return;
 
+	sd->groups->group_weight = cpumask_weight(sched_group_cpus(sd->groups));
+
 	child = sd->child;
 
 	sd->groups->cpu_power = 0;
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index f4f6a8326dd0..034c4f410b36 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -2035,13 +2035,16 @@ struct sd_lb_stats {
 	unsigned long this_load_per_task;
 	unsigned long this_nr_running;
 	unsigned long this_has_capacity;
+	unsigned int  this_idle_cpus;
 
 	/* Statistics of the busiest group */
+	unsigned int  busiest_idle_cpus;
 	unsigned long max_load;
 	unsigned long busiest_load_per_task;
 	unsigned long busiest_nr_running;
 	unsigned long busiest_group_capacity;
 	unsigned long busiest_has_capacity;
+	unsigned int  busiest_group_weight;
 
 	int group_imb; /* Is there imbalance in this sd */
 #if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
@@ -2063,6 +2066,8 @@ struct sg_lb_stats {
 	unsigned long sum_nr_running; /* Nr tasks running in the group */
 	unsigned long sum_weighted_load; /* Weighted load of group's tasks */
 	unsigned long group_capacity;
+	unsigned long idle_cpus;
+	unsigned long group_weight;
 	int group_imb; /* Is there an imbalance in the group ? */
 	int group_has_capacity; /* Is there extra capacity in the group? */
 };
@@ -2431,7 +2436,8 @@ static inline void update_sg_lb_stats(struct sched_domain *sd,
 		sgs->group_load += load;
 		sgs->sum_nr_running += rq->nr_running;
 		sgs->sum_weighted_load += weighted_cpuload(i);
-
+		if (idle_cpu(i))
+			sgs->idle_cpus++;
 	}
 
 	/*
@@ -2469,6 +2475,7 @@ static inline void update_sg_lb_stats(struct sched_domain *sd,
 	sgs->group_capacity = DIV_ROUND_CLOSEST(group->cpu_power, SCHED_LOAD_SCALE);
 	if (!sgs->group_capacity)
 		sgs->group_capacity = fix_small_capacity(sd, group);
+	sgs->group_weight = group->group_weight;
 
 	if (sgs->group_capacity > sgs->sum_nr_running)
 		sgs->group_has_capacity = 1;
@@ -2576,13 +2583,16 @@ static inline void update_sd_lb_stats(struct sched_domain *sd, int this_cpu,
 			sds->this_nr_running = sgs.sum_nr_running;
 			sds->this_load_per_task = sgs.sum_weighted_load;
 			sds->this_has_capacity = sgs.group_has_capacity;
+			sds->this_idle_cpus = sgs.idle_cpus;
 		} else if (update_sd_pick_busiest(sd, sds, sg, &sgs, this_cpu)) {
 			sds->max_load = sgs.avg_load;
 			sds->busiest = sg;
 			sds->busiest_nr_running = sgs.sum_nr_running;
+			sds->busiest_idle_cpus = sgs.idle_cpus;
 			sds->busiest_group_capacity = sgs.group_capacity;
 			sds->busiest_load_per_task = sgs.sum_weighted_load;
 			sds->busiest_has_capacity = sgs.group_has_capacity;
+			sds->busiest_group_weight = sgs.group_weight;
 			sds->group_imb = sgs.group_imb;
 		}
 
@@ -2860,8 +2870,26 @@ find_busiest_group(struct sched_domain *sd, int this_cpu,
 	if (sds.this_load >= sds.avg_load)
 		goto out_balanced;
 
-	if (100 * sds.max_load <= sd->imbalance_pct * sds.this_load)
-		goto out_balanced;
+	/*
+	 * In the CPU_NEWLY_IDLE, use imbalance_pct to be conservative.
+	 * And to check for busy balance use !idle_cpu instead of
+	 * CPU_NOT_IDLE. This is because HT siblings will use CPU_NOT_IDLE
+	 * even when they are idle.
+	 */
+	if (idle == CPU_NEWLY_IDLE || !idle_cpu(this_cpu)) {
+		if (100 * sds.max_load <= sd->imbalance_pct * sds.this_load)
+			goto out_balanced;
+	} else {
+		/*
+		 * This cpu is idle. If the busiest group load doesn't
+		 * have more tasks than the number of available cpu's and
+		 * there is no imbalance between this and busiest group
+		 * wrt to idle cpu's, it is balanced.
+		 */
+		if ((sds.this_idle_cpus  <= sds.busiest_idle_cpus + 1) &&
+		    sds.busiest_nr_running <= sds.busiest_group_weight)
+			goto out_balanced;
+	}
 
 force_balance:
 	/* Looks like there is an imbalance. Compute it */

From 2d46709082c062cae7cce1a15f8cd4cd81b92d88 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Tue, 9 Nov 2010 14:36:52 +0100
Subject: [PATCH 0433/1066] sched: Fix runnable condition for stoptask

Heiko reported that the TASK_RUNNING check is not sufficient for
CONFIG_PREEMPT=y since we can get preempted with !TASK_RUNNING.

He suggested adding a ->se.on_rq test to the existing TASK_RUNNING
one, however TASK_RUNNING will always have ->se.on_rq, so we might as
well reduce that to a single test.

[ stop tasks should never get preempted, but its good to handle
  this case correctly should this ever happen ]

Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_stoptask.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched_stoptask.c b/kernel/sched_stoptask.c
index 45bddc0c1048..755483b2a2ad 100644
--- a/kernel/sched_stoptask.c
+++ b/kernel/sched_stoptask.c
@@ -26,7 +26,7 @@ static struct task_struct *pick_next_task_stop(struct rq *rq)
 {
 	struct task_struct *stop = rq->stop;
 
-	if (stop && stop->state == TASK_RUNNING)
+	if (stop && stop->se.on_rq)
 		return stop;
 
 	return NULL;

From 89346f950014f2c615ed96c630be2a9c8576743c Mon Sep 17 00:00:00 2001
From: Felipe Contreras <felipe.contreras@gmail.com>
Date: Tue, 19 Oct 2010 10:37:24 +0300
Subject: [PATCH 0434/1066] omap: dsp: remove shm from normal memory

Also, don't be picky about the location, which incidentally fixes the
build since MEMBLOCK_REAL_LIMIT is gone on 2.6.37.

arch/arm/plat-omap/devices.c: In function 'omap_dsp_reserve_sdram_memblock':
arch/arm/plat-omap/devices.c:287: error: 'MEMBLOCK_REAL_LIMIT'
    undeclared (first use in this function)

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
---
 arch/arm/plat-omap/devices.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 6f42a18b8aa4..fc819120978d 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -284,12 +284,14 @@ void __init omap_dsp_reserve_sdram_memblock(void)
 	if (!size)
 		return;
 
-	paddr = __memblock_alloc_base(size, SZ_1M, MEMBLOCK_REAL_LIMIT);
+	paddr = memblock_alloc(size, SZ_1M);
 	if (!paddr) {
 		pr_err("%s: failed to reserve %x bytes\n",
 				__func__, size);
 		return;
 	}
+	memblock_free(paddr, size);
+	memblock_remove(paddr, size);
 
 	omap_dsp_phys_mempool_base = paddr;
 }

From 307ae1d3d05e0379211277cc652c462d36873984 Mon Sep 17 00:00:00 2001
From: Konstantin Katuev <kkatuev@gmail.com>
Date: Fri, 29 Oct 2010 12:18:18 +1100
Subject: [PATCH 0435/1066] Staging: keucr driver: fix uninitialized variable &
 proper memset length

There was commented out transfer_flags initialization.
And i think memset should fill entire structure, not only length of
pointer to it.

This makes the driver work properly now on my hardware.

Signed-off-by: Konstantin Katuev <kkatuev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/keucr/init.c      | 18 +++++++++---------
 drivers/staging/keucr/ms.c        | 14 +++++++-------
 drivers/staging/keucr/msscsi.c    |  6 +++---
 drivers/staging/keucr/sdscsi.c    |  4 ++--
 drivers/staging/keucr/smilsub.c   | 18 +++++++++---------
 drivers/staging/keucr/transport.c |  2 +-
 6 files changed, 31 insertions(+), 31 deletions(-)

diff --git a/drivers/staging/keucr/init.c b/drivers/staging/keucr/init.c
index 1934805844f2..978bf87ff13d 100644
--- a/drivers/staging/keucr/init.c
+++ b/drivers/staging/keucr/init.c
@@ -22,7 +22,7 @@ int ENE_InitMedia(struct us_data *us)
 	int	result;
 	BYTE	MiscReg03 = 0;
 
-	printk("--- Initial Nedia ---\n");
+	printk("--- Init Media ---\n");
 	result = ENE_Read_BYTE(us, REG_CARD_STATUS, &MiscReg03);
 	if (result != USB_STOR_XFER_GOOD)
 	{
@@ -64,7 +64,7 @@ int ENE_Read_BYTE(struct us_data *us, WORD index, void *buf)
 	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
 	int result;
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x01;
 	bcb->Flags			= 0x80;
@@ -92,7 +92,7 @@ int ENE_SDInit(struct us_data *us)
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->Flags = 0x80;
 	bcb->CDB[0] = 0xF2;
@@ -112,7 +112,7 @@ int ENE_SDInit(struct us_data *us)
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x200;
 	bcb->Flags			= 0x80;
@@ -161,7 +161,7 @@ int ENE_MSInit(struct us_data *us)
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x200;
 	bcb->Flags			= 0x80;
@@ -219,7 +219,7 @@ int ENE_SMInit(struct us_data *us)
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x200;
 	bcb->Flags			= 0x80;
@@ -341,7 +341,7 @@ int ENE_LoadBinCode(struct us_data *us, BYTE flag)
 		break;
 	}
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x800;
 	bcb->Flags =0x00;
@@ -433,7 +433,7 @@ int ENE_Read_Data(struct us_data *us, void *buf, unsigned int length)
 
 	//printk("transport --- ENE_Read_Data\n");
 	// set up the command wrapper
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = length;
 	bcb->Flags =0x80;
@@ -470,7 +470,7 @@ int ENE_Write_Data(struct us_data *us, void *buf, unsigned int length)
 
 	//printk("transport --- ENE_Write_Data\n");
 	// set up the command wrapper
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = length;
 	bcb->Flags =0x00;
diff --git a/drivers/staging/keucr/ms.c b/drivers/staging/keucr/ms.c
index d4340a9da87d..9a3fdb4e4fe4 100644
--- a/drivers/staging/keucr/ms.c
+++ b/drivers/staging/keucr/ms.c
@@ -15,7 +15,7 @@ int MS_ReaderCopyBlock(struct us_data *us, WORD oldphy, WORD newphy, WORD PhyBlo
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x200*len;
 	bcb->Flags			= 0x00;
@@ -53,7 +53,7 @@ int MS_ReaderReadPage(struct us_data *us, DWORD PhyBlockAddr, BYTE PageNum, PDWO
 		return USB_STOR_TRANSPORT_ERROR;
 
 	// Read Page Data
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x200;
 	bcb->Flags			= 0x80;
@@ -69,7 +69,7 @@ int MS_ReaderReadPage(struct us_data *us, DWORD PhyBlockAddr, BYTE PageNum, PDWO
 		return USB_STOR_TRANSPORT_ERROR;
 
 	// Read Extra Data
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x4;
 	bcb->Flags			= 0x80;
@@ -108,7 +108,7 @@ int MS_ReaderEraseBlock(struct us_data *us, DWORD PhyBlockAddr)
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x200;
 	bcb->Flags			= 0x80;
@@ -673,7 +673,7 @@ int MS_LibReadExtraBlock(struct us_data *us, DWORD PhyBlock, BYTE PageNum, BYTE
 	//printk("MS_LibReadExtraBlock --- PhyBlock = %x, PageNum = %x, blen = %x\n", PhyBlock, PageNum, blen);
 
 	// Read Extra Data
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x4 * blen;
 	bcb->Flags			= 0x80;
@@ -700,7 +700,7 @@ int MS_LibReadExtra(struct us_data *us, DWORD PhyBlock, BYTE PageNum, MS_LibType
 	BYTE	ExtBuf[4];
 
 	//printk("MS_LibReadExtra --- PhyBlock = %x, PageNum = %x\n", PhyBlock, PageNum);
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x4;
 	bcb->Flags			= 0x80;
@@ -807,7 +807,7 @@ int MS_LibOverwriteExtra(struct us_data *us, DWORD PhyBlockAddr, BYTE PageNum, B
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x4;
 	bcb->Flags			= 0x80;
diff --git a/drivers/staging/keucr/msscsi.c b/drivers/staging/keucr/msscsi.c
index ad0c5c629935..cb92d25acee0 100644
--- a/drivers/staging/keucr/msscsi.c
+++ b/drivers/staging/keucr/msscsi.c
@@ -145,7 +145,7 @@ int MS_SCSI_Read(struct us_data *us, struct scsi_cmnd *srb)
 		}
 
 		// set up the command wrapper
-		memset(bcb, 0, sizeof(bcb));
+		memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 		bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 		bcb->DataTransferLength = blenByte;
 		bcb->Flags  = 0x80;
@@ -193,7 +193,7 @@ int MS_SCSI_Read(struct us_data *us, struct scsi_cmnd *srb)
 			blkno  = phyblk * 0x20 + PageNum;
 
 			// set up the command wrapper
-			memset(bcb, 0, sizeof(bcb));
+			memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 			bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 			bcb->DataTransferLength = 0x200 * len;
 			bcb->Flags  = 0x80;
@@ -250,7 +250,7 @@ int MS_SCSI_Write(struct us_data *us, struct scsi_cmnd *srb)
 		}
 
 		// set up the command wrapper
-		memset(bcb, 0, sizeof(bcb));
+		memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 		bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 		bcb->DataTransferLength = blenByte;
 		bcb->Flags  = 0x00;
diff --git a/drivers/staging/keucr/sdscsi.c b/drivers/staging/keucr/sdscsi.c
index 6c332f850ebe..d646507a3611 100644
--- a/drivers/staging/keucr/sdscsi.c
+++ b/drivers/staging/keucr/sdscsi.c
@@ -152,7 +152,7 @@ int SD_SCSI_Read(struct us_data *us, struct scsi_cmnd *srb)
 		bnByte = bn;
 		
 	// set up the command wrapper
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = blenByte;
 	bcb->Flags  = 0x80;
@@ -192,7 +192,7 @@ int SD_SCSI_Write(struct us_data *us, struct scsi_cmnd *srb)
 		bnByte = bn;
 
 	// set up the command wrapper
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = blenByte;
 	bcb->Flags  = 0x00;
diff --git a/drivers/staging/keucr/smilsub.c b/drivers/staging/keucr/smilsub.c
index 844b65988636..1b52535a388f 100644
--- a/drivers/staging/keucr/smilsub.c
+++ b/drivers/staging/keucr/smilsub.c
@@ -266,7 +266,7 @@ int Ssfdc_D_ReadSect(struct us_data *us, BYTE *buf,BYTE *redundant)
 	addr = addr*(WORD)Ssfdc.MaxSectors+Media.Sector;
 
 	// Read sect data
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x200;
 	bcb->Flags			= 0x80;
@@ -281,7 +281,7 @@ int Ssfdc_D_ReadSect(struct us_data *us, BYTE *buf,BYTE *redundant)
 		return USB_STOR_TRANSPORT_ERROR;
 
 	// Read redundant
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x10;
 	bcb->Flags			= 0x80;
@@ -319,7 +319,7 @@ int Ssfdc_D_ReadBlock(struct us_data *us, WORD count, BYTE *buf,BYTE *redundant)
 	addr = addr*(WORD)Ssfdc.MaxSectors+Media.Sector;
 
 	// Read sect data
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x200*count;
 	bcb->Flags			= 0x80;
@@ -334,7 +334,7 @@ int Ssfdc_D_ReadBlock(struct us_data *us, WORD count, BYTE *buf,BYTE *redundant)
 		return USB_STOR_TRANSPORT_ERROR;
 
 	// Read redundant
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x10;
 	bcb->Flags			= 0x80;
@@ -536,7 +536,7 @@ int Ssfdc_D_CopyBlock(struct us_data *us, WORD count, BYTE *buf,BYTE *redundant)
 	WriteAddr = WriteAddr*(WORD)Ssfdc.MaxSectors;
 
 	// Write sect data
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x200*count;
 	bcb->Flags			= 0x00;
@@ -754,7 +754,7 @@ int Ssfdc_D_WriteSectForCopy(struct us_data *us, BYTE *buf, BYTE *redundant)
 	addr = addr*(WORD)Ssfdc.MaxSectors+Media.Sector;
 
 	// Write sect data
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x200;
 	bcb->Flags			= 0x00;
@@ -791,7 +791,7 @@ int Ssfdc_D_EraseBlock(struct us_data *us)
 	addr=(WORD)Media.Zone*Ssfdc.MaxBlocks+Media.PhyBlock;
 	addr=addr*(WORD)Ssfdc.MaxSectors;
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x200;
 	bcb->Flags			= 0x80;
@@ -827,7 +827,7 @@ int Ssfdc_D_ReadRedtData(struct us_data *us, BYTE *redundant)
 	addr = (WORD)Media.Zone*Ssfdc.MaxBlocks+Media.PhyBlock;
 	addr = addr*(WORD)Ssfdc.MaxSectors+Media.Sector;
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x10;
 	bcb->Flags			= 0x80;
@@ -870,7 +870,7 @@ int Ssfdc_D_WriteRedtData(struct us_data *us, BYTE *redundant)
 	addr = (WORD)Media.Zone*Ssfdc.MaxBlocks+Media.PhyBlock;
 	addr = addr*(WORD)Ssfdc.MaxSectors+Media.Sector;
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x10;
 	bcb->Flags			= 0x80;
diff --git a/drivers/staging/keucr/transport.c b/drivers/staging/keucr/transport.c
index fd98df643ab0..111160cce441 100644
--- a/drivers/staging/keucr/transport.c
+++ b/drivers/staging/keucr/transport.c
@@ -40,7 +40,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
 	us->current_urb->error_count = 0;
 	us->current_urb->status = 0;
 
-//	us->current_urb->transfer_flags = URB_NO_SETUP_DMA_MAP;
+	us->current_urb->transfer_flags = 0;
 	if (us->current_urb->transfer_buffer == us->iobuf)
 		us->current_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	us->current_urb->transfer_dma = us->iobuf_dma;

From a9db2036744676e0a9bf01522ef24140a591c0f0 Mon Sep 17 00:00:00 2001
From: Felipe Contreras <felipe.contreras@gmail.com>
Date: Wed, 10 Nov 2010 11:22:48 -0600
Subject: [PATCH 0436/1066] staging: tidspbridge: hardcode SCM macros while fix
 is upstreamed

On 2.6.37-rc1, omap platform internals for SCM have changed,
so the build is broken again.

drivers/staging/tidspbridge/core/tiomap3430.c:26:
    fatal error: plat/control.h: No such file or directory

This is a totally ugly layer violation, but needed until
omap_ctrl_set_dsp_boot*() are provided.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
---
 drivers/staging/tidspbridge/core/tiomap3430.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c
index f22bc12bc0d3..d302e30443a4 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430.c
@@ -23,7 +23,6 @@
 #include <dspbridge/host_os.h>
 #include <linux/mm.h>
 #include <linux/mmzone.h>
-#include <plat/control.h>
 
 /*  ----------------------------------- DSP/BIOS Bridge */
 #include <dspbridge/dbdefs.h>
@@ -68,6 +67,19 @@
 #define OMAP3_IVA2_BOOTADDR_MASK 0xFFFFFC00
 #define PAGES_II_LVL_TABLE   512
 
+/*
+ * This is a totally ugly layer violation, but needed until
+ * omap_ctrl_set_dsp_boot*() are provided.
+ */
+#define OMAP3_IVA2_BOOTMOD_IDLE 1
+#define OMAP2_CONTROL_GENERAL 0x270
+#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
+
+#define OMAP343X_CTRL_REGADDR(reg) \
+	OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+
+
 /* Forward Declarations: */
 static int bridge_brd_monitor(struct bridge_dev_context *dev_ctxt);
 static int bridge_brd_read(struct bridge_dev_context *dev_ctxt,

From 3fc59af631643c9ea2d600e5a07b3fcaf4e38cbd Mon Sep 17 00:00:00 2001
From: Felipe Contreras <felipe.contreras@gmail.com>
Date: Wed, 10 Nov 2010 12:08:51 -0600
Subject: [PATCH 0437/1066] Revert "staging: tidspbridge - update Kconfig to
 select IOMMU module"

This reverts commit ace5a3ce40bb90f14953c5e3f73e9cf1176b1a28.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
---
 drivers/staging/tidspbridge/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/staging/tidspbridge/Kconfig b/drivers/staging/tidspbridge/Kconfig
index ff64d464143c..93de4f2e8bf8 100644
--- a/drivers/staging/tidspbridge/Kconfig
+++ b/drivers/staging/tidspbridge/Kconfig
@@ -6,7 +6,6 @@ menuconfig TIDSPBRIDGE
 	tristate "DSP Bridge driver"
 	depends on ARCH_OMAP3
 	select OMAP_MBOX_FWK
-	select OMAP_IOMMU
 	help
 	  DSP/BIOS Bridge is designed for platforms that contain a GPP and
 	  one or more attached DSPs.  The GPP is considered the master or

From 677f2ded8179c8d5d49cfea0d5217691182b48f2 Mon Sep 17 00:00:00 2001
From: Felipe Contreras <felipe.contreras@gmail.com>
Date: Wed, 10 Nov 2010 12:09:04 -0600
Subject: [PATCH 0438/1066] Revert "staging: tidspbridge - remove dmm custom
 module"

This reverts commit 2ab573487a98c06fdfb34308f641f09369d61fa2.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
---
 drivers/staging/tidspbridge/Makefile          |   2 +-
 drivers/staging/tidspbridge/core/tiomap3430.c |   1 +
 .../tidspbridge/include/dspbridge/dev.h       |  24 +
 .../tidspbridge/include/dspbridge/dmm.h       |  75 +++
 .../tidspbridge/include/dspbridge/drv.h       |   6 +
 drivers/staging/tidspbridge/pmgr/dev.c        |  61 +-
 drivers/staging/tidspbridge/pmgr/dmm.c        | 533 ++++++++++++++++++
 drivers/staging/tidspbridge/rmgr/node.c       |  28 +-
 drivers/staging/tidspbridge/rmgr/proc.c       |  23 +
 9 files changed, 747 insertions(+), 6 deletions(-)
 create mode 100644 drivers/staging/tidspbridge/include/dspbridge/dmm.h
 create mode 100644 drivers/staging/tidspbridge/pmgr/dmm.c

diff --git a/drivers/staging/tidspbridge/Makefile b/drivers/staging/tidspbridge/Makefile
index 50decc2935c5..37bd3bcc03af 100644
--- a/drivers/staging/tidspbridge/Makefile
+++ b/drivers/staging/tidspbridge/Makefile
@@ -5,7 +5,7 @@ libcore = core/chnl_sm.o core/msg_sm.o core/io_sm.o core/tiomap3430.o \
 		core/tiomap3430_pwr.o core/tiomap_io.o core/dsp-mmu.o \
 		core/ue_deh.o core/wdt.o core/dsp-clock.o core/sync.o
 libpmgr = pmgr/chnl.o pmgr/io.o pmgr/msg.o pmgr/cod.o pmgr/dev.o pmgr/dspapi.o \
-		pmgr/cmm.o pmgr/dbll.o
+		pmgr/dmm.o pmgr/cmm.o pmgr/dbll.o
 librmgr = rmgr/dbdcd.o rmgr/disp.o rmgr/drv.o rmgr/mgr.o rmgr/node.o \
 		rmgr/proc.o rmgr/pwr.o rmgr/rmm.o rmgr/strm.o rmgr/dspdrv.o \
 		rmgr/nldr.o rmgr/drv_interface.o
diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c
index d302e30443a4..1425c50e72b9 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430.c
@@ -46,6 +46,7 @@
 /*  ----------------------------------- Platform Manager */
 #include <dspbridge/dev.h>
 #include <dspbridge/dspapi.h>
+#include <dspbridge/dmm.h>
 #include <dspbridge/wdt.h>
 
 /*  ----------------------------------- Local */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dev.h b/drivers/staging/tidspbridge/include/dspbridge/dev.h
index 9bdd48f57429..357458fadd2a 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/dev.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/dev.h
@@ -27,6 +27,7 @@
 #include <dspbridge/nodedefs.h>
 #include <dspbridge/dispdefs.h>
 #include <dspbridge/dspdefs.h>
+#include <dspbridge/dmm.h>
 #include <dspbridge/host_os.h>
 
 /*  ----------------------------------- This */
@@ -232,6 +233,29 @@ extern int dev_get_chnl_mgr(struct dev_object *hdev_obj,
 extern int dev_get_cmm_mgr(struct dev_object *hdev_obj,
 				  struct cmm_object **mgr);
 
+/*
+ *  ======== dev_get_dmm_mgr ========
+ *  Purpose:
+ *      Retrieve the handle to the dynamic memory manager created for this
+ *      device.
+ *  Parameters:
+ *      hdev_obj:     Handle to device object created with
+ *                      dev_create_device().
+ *      *mgr:           Ptr to location to store handle.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hdev_obj.
+ *  Requires:
+ *      mgr != NULL.
+ *      DEV Initialized.
+ *  Ensures:
+ *      0:        *mgr contains a handle to a channel manager object,
+ *                      or NULL.
+ *      else:           *mgr is NULL.
+ */
+extern int dev_get_dmm_mgr(struct dev_object *hdev_obj,
+				  struct dmm_object **mgr);
+
 /*
  *  ======== dev_get_cod_mgr ========
  *  Purpose:
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dmm.h b/drivers/staging/tidspbridge/include/dspbridge/dmm.h
new file mode 100644
index 000000000000..6c58335c5f60
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dmm.h
@@ -0,0 +1,75 @@
+/*
+ * dmm.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * The Dynamic Memory Mapping(DMM) module manages the DSP Virtual address
+ * space that can be directly mapped to any MPU buffer or memory region.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DMM_
+#define DMM_
+
+#include <dspbridge/dbdefs.h>
+
+struct dmm_object;
+
+/* DMM attributes used in dmm_create() */
+struct dmm_mgrattrs {
+	u32 reserved;
+};
+
+#define DMMPOOLSIZE      0x4000000
+
+/*
+ *  ======== dmm_get_handle ========
+ *  Purpose:
+ *      Return the dynamic memory manager object for this device.
+ *      This is typically called from the client process.
+ */
+
+extern int dmm_get_handle(void *hprocessor,
+				 struct dmm_object **dmm_manager);
+
+extern int dmm_reserve_memory(struct dmm_object *dmm_mgr,
+				     u32 size, u32 *prsv_addr);
+
+extern int dmm_un_reserve_memory(struct dmm_object *dmm_mgr,
+					u32 rsv_addr);
+
+extern int dmm_map_memory(struct dmm_object *dmm_mgr, u32 addr,
+				 u32 size);
+
+extern int dmm_un_map_memory(struct dmm_object *dmm_mgr,
+				    u32 addr, u32 *psize);
+
+extern int dmm_destroy(struct dmm_object *dmm_mgr);
+
+extern int dmm_delete_tables(struct dmm_object *dmm_mgr);
+
+extern int dmm_create(struct dmm_object **dmm_manager,
+			     struct dev_object *hdev_obj,
+			     const struct dmm_mgrattrs *mgr_attrts);
+
+extern bool dmm_init(void);
+
+extern void dmm_exit(void);
+
+extern int dmm_create_tables(struct dmm_object *dmm_mgr,
+				    u32 addr, u32 size);
+
+#ifdef DSP_DMM_DEBUG
+u32 dmm_mem_map_dump(struct dmm_object *dmm_mgr);
+#endif
+
+#endif /* DMM_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/drv.h b/drivers/staging/tidspbridge/include/dspbridge/drv.h
index 75a2c9b5c6f2..427f38b7b43a 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/drv.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/drv.h
@@ -108,6 +108,12 @@ struct dmm_map_object {
 	struct bridge_dma_map_info dma_info;
 };
 
+/* Used for DMM reserved memory accounting */
+struct dmm_rsv_object {
+	struct list_head link;
+	u32 dsp_reserved_addr;
+};
+
 /* New structure (member of process context) abstracts DMM resource info */
 struct dspheap_res_object {
 	s32 heap_allocated;	/* DMM status */
diff --git a/drivers/staging/tidspbridge/pmgr/dev.c b/drivers/staging/tidspbridge/pmgr/dev.c
index 7b30267ef0e2..e3c78fbfb3c0 100644
--- a/drivers/staging/tidspbridge/pmgr/dev.c
+++ b/drivers/staging/tidspbridge/pmgr/dev.c
@@ -34,6 +34,7 @@
 #include <dspbridge/cod.h>
 #include <dspbridge/drv.h>
 #include <dspbridge/proc.h>
+#include <dspbridge/dmm.h>
 
 /*  ----------------------------------- Resource Manager */
 #include <dspbridge/mgr.h>
@@ -74,6 +75,7 @@ struct dev_object {
 	struct msg_mgr *hmsg_mgr;	/* Message manager. */
 	struct io_mgr *hio_mgr;	/* IO manager (CHNL, msg_ctrl) */
 	struct cmm_object *hcmm_mgr;	/* SM memory manager. */
+	struct dmm_object *dmm_mgr;	/* Dynamic memory manager. */
 	struct ldr_module *module_obj;	/* Bridge Module handle. */
 	u32 word_size;		/* DSP word size: quick access. */
 	struct drv_object *hdrv_obj;	/* Driver Object */
@@ -248,6 +250,9 @@ int dev_create_device(struct dev_object **device_obj,
 			/* Instantiate the DEH module */
 			status = bridge_deh_create(&dev_obj->hdeh_mgr, dev_obj);
 		}
+		/* Create DMM mgr . */
+		status = dmm_create(&dev_obj->dmm_mgr,
+				    (struct dev_object *)dev_obj, NULL);
 	}
 	/* Add the new DEV_Object to the global list: */
 	if (!status) {
@@ -273,6 +278,8 @@ leave:
 			kfree(dev_obj->proc_list);
 			if (dev_obj->cod_mgr)
 				cod_delete(dev_obj->cod_mgr);
+			if (dev_obj->dmm_mgr)
+				dmm_destroy(dev_obj->dmm_mgr);
 			kfree(dev_obj);
 		}
 
@@ -382,6 +389,11 @@ int dev_destroy_device(struct dev_object *hdev_obj)
 			dev_obj->hcmm_mgr = NULL;
 		}
 
+		if (dev_obj->dmm_mgr) {
+			dmm_destroy(dev_obj->dmm_mgr);
+			dev_obj->dmm_mgr = NULL;
+		}
+
 		/* Call the driver's bridge_dev_destroy() function: */
 		/* Require of DevDestroy */
 		if (dev_obj->hbridge_context) {
@@ -461,6 +473,32 @@ int dev_get_cmm_mgr(struct dev_object *hdev_obj,
 	return status;
 }
 
+/*
+ *  ======== dev_get_dmm_mgr ========
+ *  Purpose:
+ *      Retrieve the handle to the dynamic memory manager created for this
+ *      device.
+ */
+int dev_get_dmm_mgr(struct dev_object *hdev_obj,
+			   struct dmm_object **mgr)
+{
+	int status = 0;
+	struct dev_object *dev_obj = hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(mgr != NULL);
+
+	if (hdev_obj) {
+		*mgr = dev_obj->dmm_mgr;
+	} else {
+		*mgr = NULL;
+		status = -EFAULT;
+	}
+
+	DBC_ENSURE(!status || (mgr != NULL && *mgr == NULL));
+	return status;
+}
+
 /*
  *  ======== dev_get_cod_mgr ========
  *  Purpose:
@@ -713,8 +751,10 @@ void dev_exit(void)
 
 	refs--;
 
-	if (refs == 0)
+	if (refs == 0) {
 		cmm_exit();
+		dmm_exit();
+	}
 
 	DBC_ENSURE(refs >= 0);
 }
@@ -726,12 +766,25 @@ void dev_exit(void)
  */
 bool dev_init(void)
 {
-	bool ret = true;
+	bool cmm_ret, dmm_ret, ret = true;
 
 	DBC_REQUIRE(refs >= 0);
 
-	if (refs == 0)
-		ret = cmm_init();
+	if (refs == 0) {
+		cmm_ret = cmm_init();
+		dmm_ret = dmm_init();
+
+		ret = cmm_ret && dmm_ret;
+
+		if (!ret) {
+			if (cmm_ret)
+				cmm_exit();
+
+			if (dmm_ret)
+				dmm_exit();
+
+		}
+	}
 
 	if (ret)
 		refs++;
diff --git a/drivers/staging/tidspbridge/pmgr/dmm.c b/drivers/staging/tidspbridge/pmgr/dmm.c
new file mode 100644
index 000000000000..8685233d7627
--- /dev/null
+++ b/drivers/staging/tidspbridge/pmgr/dmm.c
@@ -0,0 +1,533 @@
+/*
+ * dmm.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * The Dynamic Memory Manager (DMM) module manages the DSP Virtual address
+ * space that can be directly mapped to any MPU buffer or memory region
+ *
+ * Notes:
+ *   Region: Generic memory entitiy having a start address and a size
+ *   Chunk:  Reserved region
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/sync.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/dev.h>
+#include <dspbridge/proc.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/dmm.h>
+
+/*  ----------------------------------- Defines, Data Structures, Typedefs */
+#define DMM_ADDR_VIRTUAL(a) \
+	(((struct map_page *)(a) - virtual_mapping_table) * PG_SIZE4K +\
+	dyn_mem_map_beg)
+#define DMM_ADDR_TO_INDEX(a) (((a) - dyn_mem_map_beg) / PG_SIZE4K)
+
+/* DMM Mgr */
+struct dmm_object {
+	/* Dmm Lock is used to serialize access mem manager for
+	 * multi-threads. */
+	spinlock_t dmm_lock;	/* Lock to access dmm mgr */
+};
+
+/*  ----------------------------------- Globals */
+static u32 refs;		/* module reference count */
+struct map_page {
+	u32 region_size:15;
+	u32 mapped_size:15;
+	u32 reserved:1;
+	u32 mapped:1;
+};
+
+/*  Create the free list */
+static struct map_page *virtual_mapping_table;
+static u32 free_region;		/* The index of free region */
+static u32 free_size;
+static u32 dyn_mem_map_beg;	/* The Beginning of dynamic memory mapping */
+static u32 table_size;		/* The size of virt and phys pages tables */
+
+/*  ----------------------------------- Function Prototypes */
+static struct map_page *get_region(u32 addr);
+static struct map_page *get_free_region(u32 len);
+static struct map_page *get_mapped_region(u32 addrs);
+
+/*  ======== dmm_create_tables ========
+ *  Purpose:
+ *      Create table to hold the information of physical address
+ *      the buffer pages that is passed by the user, and the table
+ *      to hold the information of the virtual memory that is reserved
+ *      for DSP.
+ */
+int dmm_create_tables(struct dmm_object *dmm_mgr, u32 addr, u32 size)
+{
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	int status = 0;
+
+	status = dmm_delete_tables(dmm_obj);
+	if (!status) {
+		dyn_mem_map_beg = addr;
+		table_size = PG_ALIGN_HIGH(size, PG_SIZE4K) / PG_SIZE4K;
+		/*  Create the free list */
+		virtual_mapping_table = __vmalloc(table_size *
+				sizeof(struct map_page), GFP_KERNEL |
+				__GFP_HIGHMEM | __GFP_ZERO, PAGE_KERNEL);
+		if (virtual_mapping_table == NULL)
+			status = -ENOMEM;
+		else {
+			/* On successful allocation,
+			 * all entries are zero ('free') */
+			free_region = 0;
+			free_size = table_size * PG_SIZE4K;
+			virtual_mapping_table[0].region_size = table_size;
+		}
+	}
+
+	if (status)
+		pr_err("%s: failure, status 0x%x\n", __func__, status);
+
+	return status;
+}
+
+/*
+ *  ======== dmm_create ========
+ *  Purpose:
+ *      Create a dynamic memory manager object.
+ */
+int dmm_create(struct dmm_object **dmm_manager,
+		      struct dev_object *hdev_obj,
+		      const struct dmm_mgrattrs *mgr_attrts)
+{
+	struct dmm_object *dmm_obj = NULL;
+	int status = 0;
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(dmm_manager != NULL);
+
+	*dmm_manager = NULL;
+	/* create, zero, and tag a cmm mgr object */
+	dmm_obj = kzalloc(sizeof(struct dmm_object), GFP_KERNEL);
+	if (dmm_obj != NULL) {
+		spin_lock_init(&dmm_obj->dmm_lock);
+		*dmm_manager = dmm_obj;
+	} else {
+		status = -ENOMEM;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== dmm_destroy ========
+ *  Purpose:
+ *      Release the communication memory manager resources.
+ */
+int dmm_destroy(struct dmm_object *dmm_mgr)
+{
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	if (dmm_mgr) {
+		status = dmm_delete_tables(dmm_obj);
+		if (!status)
+			kfree(dmm_obj);
+	} else
+		status = -EFAULT;
+
+	return status;
+}
+
+/*
+ *  ======== dmm_delete_tables ========
+ *  Purpose:
+ *      Delete DMM Tables.
+ */
+int dmm_delete_tables(struct dmm_object *dmm_mgr)
+{
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	/* Delete all DMM tables */
+	if (dmm_mgr)
+		vfree(virtual_mapping_table);
+	else
+		status = -EFAULT;
+	return status;
+}
+
+/*
+ *  ======== dmm_exit ========
+ *  Purpose:
+ *      Discontinue usage of module; free resources when reference count
+ *      reaches 0.
+ */
+void dmm_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+}
+
+/*
+ *  ======== dmm_get_handle ========
+ *  Purpose:
+ *      Return the dynamic memory manager object for this device.
+ *      This is typically called from the client process.
+ */
+int dmm_get_handle(void *hprocessor, struct dmm_object **dmm_manager)
+{
+	int status = 0;
+	struct dev_object *hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(dmm_manager != NULL);
+	if (hprocessor != NULL)
+		status = proc_get_dev_object(hprocessor, &hdev_obj);
+	else
+		hdev_obj = dev_get_first();	/* default */
+
+	if (!status)
+		status = dev_get_dmm_mgr(hdev_obj, dmm_manager);
+
+	return status;
+}
+
+/*
+ *  ======== dmm_init ========
+ *  Purpose:
+ *      Initializes private state of DMM module.
+ */
+bool dmm_init(void)
+{
+	bool ret = true;
+
+	DBC_REQUIRE(refs >= 0);
+
+	if (ret)
+		refs++;
+
+	DBC_ENSURE((ret && (refs > 0)) || (!ret && (refs >= 0)));
+
+	virtual_mapping_table = NULL;
+	table_size = 0;
+
+	return ret;
+}
+
+/*
+ *  ======== dmm_map_memory ========
+ *  Purpose:
+ *      Add a mapping block to the reserved chunk. DMM assumes that this block
+ *  will be mapped in the DSP/IVA's address space. DMM returns an error if a
+ *  mapping overlaps another one. This function stores the info that will be
+ *  required later while unmapping the block.
+ */
+int dmm_map_memory(struct dmm_object *dmm_mgr, u32 addr, u32 size)
+{
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	struct map_page *chunk;
+	int status = 0;
+
+	spin_lock(&dmm_obj->dmm_lock);
+	/* Find the Reserved memory chunk containing the DSP block to
+	 * be mapped */
+	chunk = (struct map_page *)get_region(addr);
+	if (chunk != NULL) {
+		/* Mark the region 'mapped', leave the 'reserved' info as-is */
+		chunk->mapped = true;
+		chunk->mapped_size = (size / PG_SIZE4K);
+	} else
+		status = -ENOENT;
+	spin_unlock(&dmm_obj->dmm_lock);
+
+	dev_dbg(bridge, "%s dmm_mgr %p, addr %x, size %x\n\tstatus %x, "
+		"chunk %p", __func__, dmm_mgr, addr, size, status, chunk);
+
+	return status;
+}
+
+/*
+ *  ======== dmm_reserve_memory ========
+ *  Purpose:
+ *      Reserve a chunk of virtually contiguous DSP/IVA address space.
+ */
+int dmm_reserve_memory(struct dmm_object *dmm_mgr, u32 size,
+			      u32 *prsv_addr)
+{
+	int status = 0;
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	struct map_page *node;
+	u32 rsv_addr = 0;
+	u32 rsv_size = 0;
+
+	spin_lock(&dmm_obj->dmm_lock);
+
+	/* Try to get a DSP chunk from the free list */
+	node = get_free_region(size);
+	if (node != NULL) {
+		/*  DSP chunk of given size is available. */
+		rsv_addr = DMM_ADDR_VIRTUAL(node);
+		/* Calculate the number entries to use */
+		rsv_size = size / PG_SIZE4K;
+		if (rsv_size < node->region_size) {
+			/* Mark remainder of free region */
+			node[rsv_size].mapped = false;
+			node[rsv_size].reserved = false;
+			node[rsv_size].region_size =
+			    node->region_size - rsv_size;
+			node[rsv_size].mapped_size = 0;
+		}
+		/*  get_region will return first fit chunk. But we only use what
+		   is requested. */
+		node->mapped = false;
+		node->reserved = true;
+		node->region_size = rsv_size;
+		node->mapped_size = 0;
+		/* Return the chunk's starting address */
+		*prsv_addr = rsv_addr;
+	} else
+		/*dSP chunk of given size is not available */
+		status = -ENOMEM;
+
+	spin_unlock(&dmm_obj->dmm_lock);
+
+	dev_dbg(bridge, "%s dmm_mgr %p, size %x, prsv_addr %p\n\tstatus %x, "
+		"rsv_addr %x, rsv_size %x\n", __func__, dmm_mgr, size,
+		prsv_addr, status, rsv_addr, rsv_size);
+
+	return status;
+}
+
+/*
+ *  ======== dmm_un_map_memory ========
+ *  Purpose:
+ *      Remove the mapped block from the reserved chunk.
+ */
+int dmm_un_map_memory(struct dmm_object *dmm_mgr, u32 addr, u32 *psize)
+{
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	struct map_page *chunk;
+	int status = 0;
+
+	spin_lock(&dmm_obj->dmm_lock);
+	chunk = get_mapped_region(addr);
+	if (chunk == NULL)
+		status = -ENOENT;
+
+	if (!status) {
+		/* Unmap the region */
+		*psize = chunk->mapped_size * PG_SIZE4K;
+		chunk->mapped = false;
+		chunk->mapped_size = 0;
+	}
+	spin_unlock(&dmm_obj->dmm_lock);
+
+	dev_dbg(bridge, "%s: dmm_mgr %p, addr %x, psize %p\n\tstatus %x, "
+		"chunk %p\n", __func__, dmm_mgr, addr, psize, status, chunk);
+
+	return status;
+}
+
+/*
+ *  ======== dmm_un_reserve_memory ========
+ *  Purpose:
+ *      Free a chunk of reserved DSP/IVA address space.
+ */
+int dmm_un_reserve_memory(struct dmm_object *dmm_mgr, u32 rsv_addr)
+{
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	struct map_page *chunk;
+	u32 i;
+	int status = 0;
+	u32 chunk_size;
+
+	spin_lock(&dmm_obj->dmm_lock);
+
+	/* Find the chunk containing the reserved address */
+	chunk = get_mapped_region(rsv_addr);
+	if (chunk == NULL)
+		status = -ENOENT;
+
+	if (!status) {
+		/* Free all the mapped pages for this reserved region */
+		i = 0;
+		while (i < chunk->region_size) {
+			if (chunk[i].mapped) {
+				/* Remove mapping from the page tables. */
+				chunk_size = chunk[i].mapped_size;
+				/* Clear the mapping flags */
+				chunk[i].mapped = false;
+				chunk[i].mapped_size = 0;
+				i += chunk_size;
+			} else
+				i++;
+		}
+		/* Clear the flags (mark the region 'free') */
+		chunk->reserved = false;
+		/* NOTE: We do NOT coalesce free regions here.
+		 * Free regions are coalesced in get_region(), as it traverses
+		 *the whole mapping table
+		 */
+	}
+	spin_unlock(&dmm_obj->dmm_lock);
+
+	dev_dbg(bridge, "%s: dmm_mgr %p, rsv_addr %x\n\tstatus %x chunk %p",
+		__func__, dmm_mgr, rsv_addr, status, chunk);
+
+	return status;
+}
+
+/*
+ *  ======== get_region ========
+ *  Purpose:
+ *      Returns a region containing the specified memory region
+ */
+static struct map_page *get_region(u32 addr)
+{
+	struct map_page *curr_region = NULL;
+	u32 i = 0;
+
+	if (virtual_mapping_table != NULL) {
+		/* find page mapped by this address */
+		i = DMM_ADDR_TO_INDEX(addr);
+		if (i < table_size)
+			curr_region = virtual_mapping_table + i;
+	}
+
+	dev_dbg(bridge, "%s: curr_region %p, free_region %d, free_size %d\n",
+		__func__, curr_region, free_region, free_size);
+	return curr_region;
+}
+
+/*
+ *  ======== get_free_region ========
+ *  Purpose:
+ *  Returns the requested free region
+ */
+static struct map_page *get_free_region(u32 len)
+{
+	struct map_page *curr_region = NULL;
+	u32 i = 0;
+	u32 region_size = 0;
+	u32 next_i = 0;
+
+	if (virtual_mapping_table == NULL)
+		return curr_region;
+	if (len > free_size) {
+		/* Find the largest free region
+		 * (coalesce during the traversal) */
+		while (i < table_size) {
+			region_size = virtual_mapping_table[i].region_size;
+			next_i = i + region_size;
+			if (virtual_mapping_table[i].reserved == false) {
+				/* Coalesce, if possible */
+				if (next_i < table_size &&
+				    virtual_mapping_table[next_i].reserved
+				    == false) {
+					virtual_mapping_table[i].region_size +=
+					    virtual_mapping_table
+					    [next_i].region_size;
+					continue;
+				}
+				region_size *= PG_SIZE4K;
+				if (region_size > free_size) {
+					free_region = i;
+					free_size = region_size;
+				}
+			}
+			i = next_i;
+		}
+	}
+	if (len <= free_size) {
+		curr_region = virtual_mapping_table + free_region;
+		free_region += (len / PG_SIZE4K);
+		free_size -= len;
+	}
+	return curr_region;
+}
+
+/*
+ *  ======== get_mapped_region ========
+ *  Purpose:
+ *  Returns the requestedmapped region
+ */
+static struct map_page *get_mapped_region(u32 addrs)
+{
+	u32 i = 0;
+	struct map_page *curr_region = NULL;
+
+	if (virtual_mapping_table == NULL)
+		return curr_region;
+
+	i = DMM_ADDR_TO_INDEX(addrs);
+	if (i < table_size && (virtual_mapping_table[i].mapped ||
+			       virtual_mapping_table[i].reserved))
+		curr_region = virtual_mapping_table + i;
+	return curr_region;
+}
+
+#ifdef DSP_DMM_DEBUG
+u32 dmm_mem_map_dump(struct dmm_object *dmm_mgr)
+{
+	struct map_page *curr_node = NULL;
+	u32 i;
+	u32 freemem = 0;
+	u32 bigsize = 0;
+
+	spin_lock(&dmm_mgr->dmm_lock);
+
+	if (virtual_mapping_table != NULL) {
+		for (i = 0; i < table_size; i +=
+		     virtual_mapping_table[i].region_size) {
+			curr_node = virtual_mapping_table + i;
+			if (curr_node->reserved) {
+				/*printk("RESERVED size = 0x%x, "
+				   "Map size = 0x%x\n",
+				   (curr_node->region_size * PG_SIZE4K),
+				   (curr_node->mapped == false) ? 0 :
+				   (curr_node->mapped_size * PG_SIZE4K));
+				 */
+			} else {
+/*				printk("UNRESERVED size = 0x%x\n",
+					(curr_node->region_size * PG_SIZE4K));
+ */
+				freemem += (curr_node->region_size * PG_SIZE4K);
+				if (curr_node->region_size > bigsize)
+					bigsize = curr_node->region_size;
+			}
+		}
+	}
+	spin_unlock(&dmm_mgr->dmm_lock);
+	printk(KERN_INFO "Total DSP VA FREE memory = %d Mbytes\n",
+	       freemem / (1024 * 1024));
+	printk(KERN_INFO "Total DSP VA USED memory= %d Mbytes \n",
+	       (((table_size * PG_SIZE4K) - freemem)) / (1024 * 1024));
+	printk(KERN_INFO "DSP VA - Biggest FREE block = %d Mbytes \n\n",
+	       (bigsize * PG_SIZE4K / (1024 * 1024)));
+
+	return 0;
+}
+#endif
diff --git a/drivers/staging/tidspbridge/rmgr/node.c b/drivers/staging/tidspbridge/rmgr/node.c
index a660247f527a..ccb1811a4700 100644
--- a/drivers/staging/tidspbridge/rmgr/node.c
+++ b/drivers/staging/tidspbridge/rmgr/node.c
@@ -56,6 +56,7 @@
 /*  ----------------------------------- This */
 #include <dspbridge/nodepriv.h>
 #include <dspbridge/node.h>
+#include <dspbridge/dmm.h>
 
 /* Static/Dynamic Loader includes */
 #include <dspbridge/dbll.h>
@@ -316,6 +317,10 @@ int node_allocate(struct proc_object *hprocessor,
 	u32 mapped_addr = 0;
 	u32 map_attrs = 0x0;
 	struct dsp_processorstate proc_state;
+#ifdef DSP_DMM_DEBUG
+	struct dmm_object *dmm_mgr;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+#endif
 
 	void *node_res;
 
@@ -425,6 +430,16 @@ int node_allocate(struct proc_object *hprocessor,
 	if (status)
 		goto func_cont;
 
+#ifdef DSP_DMM_DEBUG
+	status = dmm_get_handle(p_proc_object, &dmm_mgr);
+	if (!dmm_mgr) {
+		status = DSP_EHANDLE;
+		goto func_cont;
+	}
+
+	dmm_mem_map_dump(dmm_mgr);
+#endif
+
 	map_attrs |= DSP_MAPLITTLEENDIAN;
 	map_attrs |= DSP_MAPELEMSIZE32;
 	map_attrs |= DSP_MAPVIRTUALADDR;
@@ -2484,7 +2499,11 @@ static void delete_node(struct node_object *hnode,
 	struct stream_chnl stream;
 	struct node_msgargs node_msg_args;
 	struct node_taskargs task_arg_obj;
-
+#ifdef DSP_DMM_DEBUG
+	struct dmm_object *dmm_mgr;
+	struct proc_object *p_proc_object =
+	    (struct proc_object *)hnode->hprocessor;
+#endif
 	int status;
 	if (!hnode)
 		goto func_end;
@@ -2545,6 +2564,13 @@ static void delete_node(struct node_object *hnode,
 			status = proc_un_map(hnode->hprocessor, (void *)
 					     task_arg_obj.udsp_heap_addr,
 					     pr_ctxt);
+#ifdef DSP_DMM_DEBUG
+			status = dmm_get_handle(p_proc_object, &dmm_mgr);
+			if (dmm_mgr)
+				dmm_mem_map_dump(dmm_mgr);
+			else
+				status = DSP_EHANDLE;
+#endif
 		}
 	}
 	if (node_type != NODE_MESSAGE) {
diff --git a/drivers/staging/tidspbridge/rmgr/proc.c b/drivers/staging/tidspbridge/rmgr/proc.c
index 7a15a02efedf..429f3549965a 100644
--- a/drivers/staging/tidspbridge/rmgr/proc.c
+++ b/drivers/staging/tidspbridge/rmgr/proc.c
@@ -39,6 +39,7 @@
 #include <dspbridge/cod.h>
 #include <dspbridge/dev.h>
 #include <dspbridge/procpriv.h>
+#include <dspbridge/dmm.h>
 
 /*  ----------------------------------- Resource Manager */
 #include <dspbridge/mgr.h>
@@ -1077,6 +1078,7 @@ int proc_load(void *hprocessor, const s32 argc_index,
 	s32 cnew_envp;		/* "  " in new_envp[] */
 	s32 nproc_id = 0;	/* Anticipate MP version. */
 	struct dcd_manager *hdcd_handle;
+	struct dmm_object *dmm_mgr;
 	u32 dw_ext_end;
 	u32 proc_id;
 	int brd_state;
@@ -1267,6 +1269,25 @@ int proc_load(void *hprocessor, const s32 argc_index,
 			if (!status)
 				status = cod_get_sym_value(cod_mgr, EXTEND,
 							   &dw_ext_end);
+
+			/* Reset DMM structs and add an initial free chunk */
+			if (!status) {
+				status =
+				    dev_get_dmm_mgr(p_proc_object->hdev_obj,
+						    &dmm_mgr);
+				if (dmm_mgr) {
+					/* Set dw_ext_end to DMM START u8
+					 * address */
+					dw_ext_end =
+					    (dw_ext_end + 1) * DSPWORDSIZE;
+					/* DMM memory is from EXT_END */
+					status = dmm_create_tables(dmm_mgr,
+								   dw_ext_end,
+								   DMMPOOLSIZE);
+				} else {
+					status = -EFAULT;
+				}
+			}
 		}
 	}
 	/* Restore the original argv[0] */
@@ -1369,6 +1390,7 @@ int proc_map(void *hprocessor, void *pmpu_addr, u32 ul_size,
 		map_obj->dsp_addr = (va_align |
 					((u32)pmpu_addr & (PG_SIZE4K - 1)));
 		*pp_map_addr = (void *)map_obj->dsp_addr;
+		pr_err("%s: mapped address %x\n", __func__, *pp_map_addr);
 	} else {
 		remove_mapping_information(pr_ctxt, va_align);
 	}
@@ -1611,6 +1633,7 @@ int proc_un_map(void *hprocessor, void *map_addr,
 	int status = 0;
 	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
 	u32 va_align;
+	u32 size_align;
 
 	va_align = PG_ALIGN_LOW((u32) map_addr, PG_SIZE4K);
 	if (!p_proc_object) {

From 2fa28a5182869968a388d34f8d809aa07a0d4046 Mon Sep 17 00:00:00 2001
From: Felipe Contreras <felipe.contreras@gmail.com>
Date: Wed, 10 Nov 2010 12:09:09 -0600
Subject: [PATCH 0439/1066] Revert "staging: tidspbridge - deprecate
 reserve/unreserve_memory funtions"

This reverts commit b1ced160af36043ee80d354318794753b6b7c008.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
---
 .../tidspbridge/include/dspbridge/proc.h      |  46 +++++++
 drivers/staging/tidspbridge/pmgr/dspapi.c     |  34 +++++-
 drivers/staging/tidspbridge/rmgr/node.c       |  20 ++-
 drivers/staging/tidspbridge/rmgr/proc.c       | 114 ++++++++++++++++--
 4 files changed, 197 insertions(+), 17 deletions(-)

diff --git a/drivers/staging/tidspbridge/include/dspbridge/proc.h b/drivers/staging/tidspbridge/include/dspbridge/proc.h
index 2d12aab6b5bf..5e09fd165d9d 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/proc.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/proc.h
@@ -550,6 +550,29 @@ extern int proc_map(void *hprocessor,
 			   void **pp_map_addr, u32 ul_map_attr,
 			   struct process_context *pr_ctxt);
 
+/*
+ *  ======== proc_reserve_memory ========
+ *  Purpose:
+ *      Reserve a virtually contiguous region of DSP address space.
+ *  Parameters:
+ *      hprocessor      :   The processor handle.
+ *      ul_size	  :   Size of the address space to reserve.
+ *      pp_rsv_addr       :   Ptr to DSP side reserved u8 address.
+ *  Returns:
+ *      0	 :   Success.
+ *      -EFAULT     :   Invalid processor handle.
+ *      -EPERM       :   General failure.
+ *      -ENOMEM     :   Cannot reserve chunk of this size.
+ *  Requires:
+ *      pp_rsv_addr is not NULL
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ */
+extern int proc_reserve_memory(void *hprocessor,
+				      u32 ul_size, void **pp_rsv_addr,
+				      struct process_context *pr_ctxt);
+
 /*
  *  ======== proc_un_map ========
  *  Purpose:
@@ -572,4 +595,27 @@ extern int proc_map(void *hprocessor,
 extern int proc_un_map(void *hprocessor, void *map_addr,
 			      struct process_context *pr_ctxt);
 
+/*
+ *  ======== proc_un_reserve_memory ========
+ *  Purpose:
+ *      Frees a previously reserved region of DSP address space.
+ *  Parameters:
+ *      hprocessor      :   The processor handle.
+ *      prsv_addr	:   Ptr to DSP side reservedBYTE address.
+ *  Returns:
+ *      0	 :   Success.
+ *      -EFAULT     :   Invalid processor handle.
+ *      -EPERM       :   General failure.
+ *      -ENOENT   :   Cannot find a reserved region starting with this
+ *		      :   address.
+ *  Requires:
+ *      prsv_addr is not NULL
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ */
+extern int proc_un_reserve_memory(void *hprocessor,
+					 void *prsv_addr,
+					 struct process_context *pr_ctxt);
+
 #endif /* PROC_ */
diff --git a/drivers/staging/tidspbridge/pmgr/dspapi.c b/drivers/staging/tidspbridge/pmgr/dspapi.c
index 981551ce4d78..86ca785f1913 100644
--- a/drivers/staging/tidspbridge/pmgr/dspapi.c
+++ b/drivers/staging/tidspbridge/pmgr/dspapi.c
@@ -993,10 +993,27 @@ u32 procwrap_register_notify(union trapped_args *args, void *pr_ctxt)
 /*
  * ======== procwrap_reserve_memory ========
  */
-u32 __deprecated procwrap_reserve_memory(union trapped_args *args,
-							void *pr_ctxt)
+u32 procwrap_reserve_memory(union trapped_args *args, void *pr_ctxt)
 {
-	return 0;
+	int status;
+	void *prsv_addr;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	if ((args->args_proc_rsvmem.ul_size <= 0) ||
+	    (args->args_proc_rsvmem.ul_size & (PG_SIZE4K - 1)) != 0)
+		return -EINVAL;
+
+	status = proc_reserve_memory(hprocessor,
+				     args->args_proc_rsvmem.ul_size, &prsv_addr,
+				     pr_ctxt);
+	if (!status) {
+		if (put_user(prsv_addr, args->args_proc_rsvmem.pp_rsv_addr)) {
+			status = -EINVAL;
+			proc_un_reserve_memory(args->args_proc_rsvmem.
+					       hprocessor, prsv_addr, pr_ctxt);
+		}
+	}
+	return status;
 }
 
 /*
@@ -1025,10 +1042,15 @@ u32 procwrap_un_map(union trapped_args *args, void *pr_ctxt)
 /*
  * ======== procwrap_un_reserve_memory ========
  */
-u32 __deprecated procwrap_un_reserve_memory(union trapped_args *args,
-							void *pr_ctxt)
+u32 procwrap_un_reserve_memory(union trapped_args *args, void *pr_ctxt)
 {
-	return 0;
+	int status;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	status = proc_un_reserve_memory(hprocessor,
+					args->args_proc_unrsvmem.prsv_addr,
+					pr_ctxt);
+	return status;
 }
 
 /*
diff --git a/drivers/staging/tidspbridge/rmgr/node.c b/drivers/staging/tidspbridge/rmgr/node.c
index ccb1811a4700..1562f3c1281c 100644
--- a/drivers/staging/tidspbridge/rmgr/node.c
+++ b/drivers/staging/tidspbridge/rmgr/node.c
@@ -430,6 +430,17 @@ int node_allocate(struct proc_object *hprocessor,
 	if (status)
 		goto func_cont;
 
+	status = proc_reserve_memory(hprocessor,
+				     pnode->create_args.asa.task_arg_obj.
+				     heap_size + PAGE_SIZE,
+				     (void **)&(pnode->create_args.asa.
+					task_arg_obj.udsp_heap_res_addr),
+				     pr_ctxt);
+	if (status) {
+		pr_err("%s: Failed to reserve memory for heap: 0x%x\n",
+		       __func__, status);
+		goto func_cont;
+	}
 #ifdef DSP_DMM_DEBUG
 	status = dmm_get_handle(p_proc_object, &dmm_mgr);
 	if (!dmm_mgr) {
@@ -445,7 +456,8 @@ int node_allocate(struct proc_object *hprocessor,
 	map_attrs |= DSP_MAPVIRTUALADDR;
 	status = proc_map(hprocessor, (void *)attr_in->pgpp_virt_addr,
 			  pnode->create_args.asa.task_arg_obj.heap_size,
-			  NULL, (void **)&mapped_addr, map_attrs,
+			  (void *)pnode->create_args.asa.task_arg_obj.
+			  udsp_heap_res_addr, (void **)&mapped_addr, map_attrs,
 			  pr_ctxt);
 	if (status)
 		pr_err("%s: Failed to map memory for Heap: 0x%x\n",
@@ -2564,6 +2576,12 @@ static void delete_node(struct node_object *hnode,
 			status = proc_un_map(hnode->hprocessor, (void *)
 					     task_arg_obj.udsp_heap_addr,
 					     pr_ctxt);
+
+			status = proc_un_reserve_memory(hnode->hprocessor,
+							(void *)
+							task_arg_obj.
+							udsp_heap_res_addr,
+							pr_ctxt);
 #ifdef DSP_DMM_DEBUG
 			status = dmm_get_handle(p_proc_object, &dmm_mgr);
 			if (dmm_mgr)
diff --git a/drivers/staging/tidspbridge/rmgr/proc.c b/drivers/staging/tidspbridge/rmgr/proc.c
index 429f3549965a..e5fec5729037 100644
--- a/drivers/staging/tidspbridge/rmgr/proc.c
+++ b/drivers/staging/tidspbridge/rmgr/proc.c
@@ -152,21 +152,34 @@ static struct dmm_map_object *add_mapping_info(struct process_context *pr_ctxt,
 	return map_obj;
 }
 
+static int match_exact_map_obj(struct dmm_map_object *map_obj,
+					u32 dsp_addr, u32 size)
+{
+	if (map_obj->dsp_addr == dsp_addr && map_obj->size != size)
+		pr_err("%s: addr match (0x%x), size don't (0x%x != 0x%x)\n",
+				__func__, dsp_addr, map_obj->size, size);
+
+	return map_obj->dsp_addr == dsp_addr &&
+		map_obj->size == size;
+}
+
 static void remove_mapping_information(struct process_context *pr_ctxt,
-						u32 dsp_addr)
+						u32 dsp_addr, u32 size)
 {
 	struct dmm_map_object *map_obj;
 
-	pr_debug("%s: looking for virt 0x%x\n", __func__, dsp_addr);
+	pr_debug("%s: looking for virt 0x%x size 0x%x\n", __func__,
+							dsp_addr, size);
 
 	spin_lock(&pr_ctxt->dmm_map_lock);
 	list_for_each_entry(map_obj, &pr_ctxt->dmm_map_list, link) {
-		pr_debug("%s: candidate: mpu_addr 0x%x virt 0x%x\n",
+		pr_debug("%s: candidate: mpu_addr 0x%x virt 0x%x size 0x%x\n",
 							__func__,
 							map_obj->mpu_addr,
-							map_obj->dsp_addr);
+							map_obj->dsp_addr,
+							map_obj->size);
 
-		if (map_obj->dsp_addr == dsp_addr) {
+		if (match_exact_map_obj(map_obj, dsp_addr, size)) {
 			pr_debug("%s: match, deleting map info\n", __func__);
 			list_del(&map_obj->link);
 			kfree(map_obj->dma_info.sg);
@@ -1340,6 +1353,7 @@ int proc_map(void *hprocessor, void *pmpu_addr, u32 ul_size,
 {
 	u32 va_align;
 	u32 pa_align;
+	struct dmm_object *dmm_mgr;
 	u32 size_align;
 	int status = 0;
 	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
@@ -1368,6 +1382,11 @@ int proc_map(void *hprocessor, void *pmpu_addr, u32 ul_size,
 	}
 	/* Critical section */
 	mutex_lock(&proc_lock);
+	dmm_get_handle(p_proc_object, &dmm_mgr);
+	if (dmm_mgr)
+		status = dmm_map_memory(dmm_mgr, va_align, size_align);
+	else
+		status = -EFAULT;
 
 	/* Add mapping to the page tables. */
 	if (!status) {
@@ -1390,9 +1409,9 @@ int proc_map(void *hprocessor, void *pmpu_addr, u32 ul_size,
 		map_obj->dsp_addr = (va_align |
 					((u32)pmpu_addr & (PG_SIZE4K - 1)));
 		*pp_map_addr = (void *)map_obj->dsp_addr;
-		pr_err("%s: mapped address %x\n", __func__, *pp_map_addr);
 	} else {
-		remove_mapping_information(pr_ctxt, va_align);
+		remove_mapping_information(pr_ctxt, va_align, size_align);
+		dmm_un_map_memory(dmm_mgr, va_align, &size_align);
 	}
 	mutex_unlock(&proc_lock);
 
@@ -1484,6 +1503,38 @@ func_end:
 	return status;
 }
 
+/*
+ *  ======== proc_reserve_memory ========
+ *  Purpose:
+ *      Reserve a virtually contiguous region of DSP address space.
+ */
+int proc_reserve_memory(void *hprocessor, u32 ul_size,
+			       void **pp_rsv_addr,
+			       struct process_context *pr_ctxt)
+{
+	struct dmm_object *dmm_mgr;
+	int status = 0;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+
+	if (!p_proc_object) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	status = dmm_get_handle(p_proc_object, &dmm_mgr);
+	if (!dmm_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	status = dmm_reserve_memory(dmm_mgr, ul_size, (u32 *) pp_rsv_addr);
+func_end:
+	dev_dbg(bridge, "%s: hprocessor: 0x%p ul_size: 0x%x pp_rsv_addr: 0x%p "
+		"status 0x%x\n", __func__, hprocessor,
+		ul_size, pp_rsv_addr, status);
+	return status;
+}
+
 /*
  *  ======== proc_start ========
  *  Purpose:
@@ -1632,6 +1683,7 @@ int proc_un_map(void *hprocessor, void *map_addr,
 {
 	int status = 0;
 	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	struct dmm_object *dmm_mgr;
 	u32 va_align;
 	u32 size_align;
 
@@ -1641,11 +1693,23 @@ int proc_un_map(void *hprocessor, void *map_addr,
 		goto func_end;
 	}
 
+	status = dmm_get_handle(hprocessor, &dmm_mgr);
+	if (!dmm_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
 	/* Critical section */
 	mutex_lock(&proc_lock);
+	/*
+	 * Update DMM structures. Get the size to unmap.
+	 * This function returns error if the VA is not mapped
+	 */
+	status = dmm_un_map_memory(dmm_mgr, (u32) va_align, &size_align);
 	/* Remove mapping from the page tables. */
-	status = user_to_dsp_unmap(p_proc_object->hbridge_context->dsp_mmu,
-								va_align);
+	if (!status)
+		status = user_to_dsp_unmap(
+			p_proc_object->hbridge_context->dsp_mmu, va_align);
 
 	mutex_unlock(&proc_lock);
 	if (status)
@@ -1656,7 +1720,7 @@ int proc_un_map(void *hprocessor, void *map_addr,
 	 * from dmm_map_list, so that mapped memory resource tracking
 	 * remains uptodate
 	 */
-	remove_mapping_information(pr_ctxt, (u32) map_addr);
+	remove_mapping_information(pr_ctxt, (u32) map_addr, size_align);
 
 func_end:
 	dev_dbg(bridge, "%s: hprocessor: 0x%p map_addr: 0x%p status: 0x%x\n",
@@ -1664,6 +1728,36 @@ func_end:
 	return status;
 }
 
+/*
+ *  ======== proc_un_reserve_memory ========
+ *  Purpose:
+ *      Frees a previously reserved region of DSP address space.
+ */
+int proc_un_reserve_memory(void *hprocessor, void *prsv_addr,
+				  struct process_context *pr_ctxt)
+{
+	struct dmm_object *dmm_mgr;
+	int status = 0;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+
+	if (!p_proc_object) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	status = dmm_get_handle(p_proc_object, &dmm_mgr);
+	if (!dmm_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	status = dmm_un_reserve_memory(dmm_mgr, (u32) prsv_addr);
+func_end:
+	dev_dbg(bridge, "%s: hprocessor: 0x%p prsv_addr: 0x%p status: 0x%x\n",
+		__func__, hprocessor, prsv_addr, status);
+	return status;
+}
+
 /*
  *  ======== = proc_monitor ======== ==
  *  Purpose:

From a28903501cb7f7b1ad52c1e981aed2738ae7c434 Mon Sep 17 00:00:00 2001
From: Felipe Contreras <felipe.contreras@gmail.com>
Date: Wed, 10 Nov 2010 12:09:22 -0600
Subject: [PATCH 0440/1066] Revert "staging: tidspbridge - remove reserved
 memory clean up"

This reverts commit db348ca36e5881cd1d2e5caa6eee7d0237d07a3d.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
---
 .../tidspbridge/include/dspbridge/drv.h       |  4 +++
 drivers/staging/tidspbridge/rmgr/drv.c        | 11 ++++++
 .../staging/tidspbridge/rmgr/drv_interface.c  |  2 ++
 drivers/staging/tidspbridge/rmgr/proc.c       | 36 +++++++++++++++++++
 4 files changed, 53 insertions(+)

diff --git a/drivers/staging/tidspbridge/include/dspbridge/drv.h b/drivers/staging/tidspbridge/include/dspbridge/drv.h
index 427f38b7b43a..c1f363ec9afa 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/drv.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/drv.h
@@ -165,6 +165,10 @@ struct process_context {
 	struct list_head dmm_map_list;
 	spinlock_t dmm_map_lock;
 
+	/* DMM reserved memory resources */
+	struct list_head dmm_rsv_list;
+	spinlock_t dmm_rsv_lock;
+
 	/* DSP Heap resources */
 	struct dspheap_res_object *pdspheap_list;
 
diff --git a/drivers/staging/tidspbridge/rmgr/drv.c b/drivers/staging/tidspbridge/rmgr/drv.c
index 91cc168516e5..0c857b93416a 100644
--- a/drivers/staging/tidspbridge/rmgr/drv.c
+++ b/drivers/staging/tidspbridge/rmgr/drv.c
@@ -146,6 +146,7 @@ int drv_remove_all_dmm_res_elements(void *process_ctxt)
 	struct process_context *ctxt = (struct process_context *)process_ctxt;
 	int status = 0;
 	struct dmm_map_object *temp_map, *map_obj;
+	struct dmm_rsv_object *temp_rsv, *rsv_obj;
 
 	/* Free DMM mapped memory resources */
 	list_for_each_entry_safe(map_obj, temp_map, &ctxt->dmm_map_list, link) {
@@ -155,6 +156,16 @@ int drv_remove_all_dmm_res_elements(void *process_ctxt)
 			pr_err("%s: proc_un_map failed!"
 			       " status = 0x%xn", __func__, status);
 	}
+
+	/* Free DMM reserved memory resources */
+	list_for_each_entry_safe(rsv_obj, temp_rsv, &ctxt->dmm_rsv_list, link) {
+		status = proc_un_reserve_memory(ctxt->hprocessor, (void *)
+						rsv_obj->dsp_reserved_addr,
+						ctxt);
+		if (status)
+			pr_err("%s: proc_un_reserve_memory failed!"
+			       " status = 0x%xn", __func__, status);
+	}
 	return status;
 }
 
diff --git a/drivers/staging/tidspbridge/rmgr/drv_interface.c b/drivers/staging/tidspbridge/rmgr/drv_interface.c
index 34be43fec044..324fcdffb3b3 100644
--- a/drivers/staging/tidspbridge/rmgr/drv_interface.c
+++ b/drivers/staging/tidspbridge/rmgr/drv_interface.c
@@ -509,6 +509,8 @@ static int bridge_open(struct inode *ip, struct file *filp)
 		pr_ctxt->res_state = PROC_RES_ALLOCATED;
 		spin_lock_init(&pr_ctxt->dmm_map_lock);
 		INIT_LIST_HEAD(&pr_ctxt->dmm_map_list);
+		spin_lock_init(&pr_ctxt->dmm_rsv_lock);
+		INIT_LIST_HEAD(&pr_ctxt->dmm_rsv_list);
 
 		pr_ctxt->node_id = kzalloc(sizeof(struct idr), GFP_KERNEL);
 		if (pr_ctxt->node_id) {
diff --git a/drivers/staging/tidspbridge/rmgr/proc.c b/drivers/staging/tidspbridge/rmgr/proc.c
index e5fec5729037..59c946bb3ed2 100644
--- a/drivers/staging/tidspbridge/rmgr/proc.c
+++ b/drivers/staging/tidspbridge/rmgr/proc.c
@@ -1515,6 +1515,7 @@ int proc_reserve_memory(void *hprocessor, u32 ul_size,
 	struct dmm_object *dmm_mgr;
 	int status = 0;
 	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	struct dmm_rsv_object *rsv_obj;
 
 	if (!p_proc_object) {
 		status = -EFAULT;
@@ -1528,6 +1529,22 @@ int proc_reserve_memory(void *hprocessor, u32 ul_size,
 	}
 
 	status = dmm_reserve_memory(dmm_mgr, ul_size, (u32 *) pp_rsv_addr);
+	if (status != 0)
+		goto func_end;
+
+	/*
+	 * A successful reserve should be followed by insertion of rsv_obj
+	 * into dmm_rsv_list, so that reserved memory resource tracking
+	 * remains uptodate
+	 */
+	rsv_obj = kmalloc(sizeof(struct dmm_rsv_object), GFP_KERNEL);
+	if (rsv_obj) {
+		rsv_obj->dsp_reserved_addr = (u32) *pp_rsv_addr;
+		spin_lock(&pr_ctxt->dmm_rsv_lock);
+		list_add(&rsv_obj->link, &pr_ctxt->dmm_rsv_list);
+		spin_unlock(&pr_ctxt->dmm_rsv_lock);
+	}
+
 func_end:
 	dev_dbg(bridge, "%s: hprocessor: 0x%p ul_size: 0x%x pp_rsv_addr: 0x%p "
 		"status 0x%x\n", __func__, hprocessor,
@@ -1739,6 +1756,7 @@ int proc_un_reserve_memory(void *hprocessor, void *prsv_addr,
 	struct dmm_object *dmm_mgr;
 	int status = 0;
 	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	struct dmm_rsv_object *rsv_obj;
 
 	if (!p_proc_object) {
 		status = -EFAULT;
@@ -1752,6 +1770,24 @@ int proc_un_reserve_memory(void *hprocessor, void *prsv_addr,
 	}
 
 	status = dmm_un_reserve_memory(dmm_mgr, (u32) prsv_addr);
+	if (status != 0)
+		goto func_end;
+
+	/*
+	 * A successful unreserve should be followed by removal of rsv_obj
+	 * from dmm_rsv_list, so that reserved memory resource tracking
+	 * remains uptodate
+	 */
+	spin_lock(&pr_ctxt->dmm_rsv_lock);
+	list_for_each_entry(rsv_obj, &pr_ctxt->dmm_rsv_list, link) {
+		if (rsv_obj->dsp_reserved_addr == (u32) prsv_addr) {
+			list_del(&rsv_obj->link);
+			kfree(rsv_obj);
+			break;
+		}
+	}
+	spin_unlock(&pr_ctxt->dmm_rsv_lock);
+
 func_end:
 	dev_dbg(bridge, "%s: hprocessor: 0x%p prsv_addr: 0x%p status: 0x%x\n",
 		__func__, hprocessor, prsv_addr, status);

From 9d4f81a722863c42472541cb71981d09613775b3 Mon Sep 17 00:00:00 2001
From: Felipe Contreras <felipe.contreras@gmail.com>
Date: Wed, 10 Nov 2010 12:09:35 -0600
Subject: [PATCH 0441/1066] Revert "staging: tidspbridge: remove dw_dmmu_base
 from cfg_hostres struct"

This reverts commit b5a44939231d6e3b0354624289507bfa1432a7b1.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
---
 drivers/staging/tidspbridge/core/tiomap3430.c           | 3 +++
 drivers/staging/tidspbridge/core/tiomap_io.c            | 3 ++-
 drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h | 1 +
 drivers/staging/tidspbridge/rmgr/drv.c                  | 4 ++++
 4 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c
index 1425c50e72b9..53b38b2b9ce1 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430.c
@@ -845,6 +845,8 @@ static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt)
 			iounmap((void *)host_res->dw_mem_base[3]);
 		if (host_res->dw_mem_base[4])
 			iounmap((void *)host_res->dw_mem_base[4]);
+		if (host_res->dw_dmmu_base)
+			iounmap(host_res->dw_dmmu_base);
 		if (host_res->dw_per_base)
 			iounmap(host_res->dw_per_base);
 		if (host_res->dw_per_pm_base)
@@ -858,6 +860,7 @@ static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt)
 		host_res->dw_mem_base[2] = (u32) NULL;
 		host_res->dw_mem_base[3] = (u32) NULL;
 		host_res->dw_mem_base[4] = (u32) NULL;
+		host_res->dw_dmmu_base = NULL;
 		host_res->dw_sys_ctrl_base = NULL;
 
 		kfree(host_res);
diff --git a/drivers/staging/tidspbridge/core/tiomap_io.c b/drivers/staging/tidspbridge/core/tiomap_io.c
index 66dbf02549e4..b526532fdd07 100644
--- a/drivers/staging/tidspbridge/core/tiomap_io.c
+++ b/drivers/staging/tidspbridge/core/tiomap_io.c
@@ -393,6 +393,7 @@ int sm_interrupt_dsp(struct bridge_dev_context *dev_context, u16 mb_val)
 		omap_dspbridge_dev->dev.platform_data;
 	struct cfg_hostres *resources = dev_context->resources;
 	int status = 0;
+	u32 temp;
 
 	if (!dev_context->mbox)
 		return 0;
@@ -436,7 +437,7 @@ int sm_interrupt_dsp(struct bridge_dev_context *dev_context, u16 mb_val)
 		omap_mbox_restore_ctx(dev_context->mbox);
 
 		/* Access MMU SYS CONFIG register to generate a short wakeup */
-		iommu_read_reg(dev_context->dsp_mmu, MMU_SYSCONFIG);
+		temp = readl(resources->dw_dmmu_base + 0x10);
 
 		dev_context->dw_brd_state = BRD_RUNNING;
 	} else if (dev_context->dw_brd_state == BRD_RETENTION) {
diff --git a/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h b/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h
index dfb55cca34c7..38122dbf877a 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h
@@ -68,6 +68,7 @@ struct cfg_hostres {
 	void __iomem *dw_per_base;
 	u32 dw_per_pm_base;
 	u32 dw_core_pm_base;
+	void __iomem *dw_dmmu_base;
 	void __iomem *dw_sys_ctrl_base;
 };
 
diff --git a/drivers/staging/tidspbridge/rmgr/drv.c b/drivers/staging/tidspbridge/rmgr/drv.c
index 0c857b93416a..81b1b9013550 100644
--- a/drivers/staging/tidspbridge/rmgr/drv.c
+++ b/drivers/staging/tidspbridge/rmgr/drv.c
@@ -743,6 +743,7 @@ static int request_bridge_resources(struct cfg_hostres *res)
 	host_res->dw_sys_ctrl_base = ioremap(OMAP_SYSC_BASE, OMAP_SYSC_SIZE);
 	dev_dbg(bridge, "dw_mem_base[0] 0x%x\n", host_res->dw_mem_base[0]);
 	dev_dbg(bridge, "dw_mem_base[3] 0x%x\n", host_res->dw_mem_base[3]);
+	dev_dbg(bridge, "dw_dmmu_base %p\n", host_res->dw_dmmu_base);
 
 	/* for 24xx base port is not mapping the mamory for DSP
 	 * internal memory TODO Do a ioremap here */
@@ -796,6 +797,8 @@ int drv_request_bridge_res_dsp(void **phost_resources)
 							 OMAP_PER_PRM_SIZE);
 		host_res->dw_core_pm_base = (u32) ioremap(OMAP_CORE_PRM_BASE,
 							  OMAP_CORE_PRM_SIZE);
+		host_res->dw_dmmu_base = ioremap(OMAP_DMMU_BASE,
+						 OMAP_DMMU_SIZE);
 
 		dev_dbg(bridge, "dw_mem_base[0] 0x%x\n",
 			host_res->dw_mem_base[0]);
@@ -807,6 +810,7 @@ int drv_request_bridge_res_dsp(void **phost_resources)
 			host_res->dw_mem_base[3]);
 		dev_dbg(bridge, "dw_mem_base[4] 0x%x\n",
 			host_res->dw_mem_base[4]);
+		dev_dbg(bridge, "dw_dmmu_base %p\n", host_res->dw_dmmu_base);
 
 		shm_size = drv_datap->shm_size;
 		if (shm_size >= 0x10000) {

From f5bd96bbe320b9fe1c8132a1633e8582cd9d6245 Mon Sep 17 00:00:00 2001
From: Felipe Contreras <felipe.contreras@gmail.com>
Date: Wed, 10 Nov 2010 12:10:20 -0600
Subject: [PATCH 0442/1066] Revert "staging: tidspbridge - move all iommu
 related code to a new file"

This reverts commit f94378f9f9a897fc08e9d12733401ae52466e408.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
---
 drivers/staging/tidspbridge/Makefile          |   2 +-
 drivers/staging/tidspbridge/core/_deh.h       |   3 +
 drivers/staging/tidspbridge/core/_tiomap.h    |  27 +-
 drivers/staging/tidspbridge/core/dsp-mmu.c    | 317 ------------------
 drivers/staging/tidspbridge/core/tiomap3430.c | 178 +++++++++-
 drivers/staging/tidspbridge/core/ue_deh.c     |  86 ++++-
 .../tidspbridge/include/dspbridge/dsp-mmu.h   |  67 ----
 7 files changed, 289 insertions(+), 391 deletions(-)
 delete mode 100644 drivers/staging/tidspbridge/core/dsp-mmu.c
 delete mode 100644 drivers/staging/tidspbridge/include/dspbridge/dsp-mmu.h

diff --git a/drivers/staging/tidspbridge/Makefile b/drivers/staging/tidspbridge/Makefile
index 37bd3bcc03af..1a091faac046 100644
--- a/drivers/staging/tidspbridge/Makefile
+++ b/drivers/staging/tidspbridge/Makefile
@@ -2,7 +2,7 @@ obj-$(CONFIG_TIDSPBRIDGE)	+= bridgedriver.o
 
 libgen = gen/gb.o gen/gs.o gen/gh.o gen/uuidutil.o
 libcore = core/chnl_sm.o core/msg_sm.o core/io_sm.o core/tiomap3430.o \
-		core/tiomap3430_pwr.o core/tiomap_io.o core/dsp-mmu.o \
+		core/tiomap3430_pwr.o core/tiomap_io.o \
 		core/ue_deh.o core/wdt.o core/dsp-clock.o core/sync.o
 libpmgr = pmgr/chnl.o pmgr/io.o pmgr/msg.o pmgr/cod.o pmgr/dev.o pmgr/dspapi.o \
 		pmgr/dmm.o pmgr/cmm.o pmgr/dbll.o
diff --git a/drivers/staging/tidspbridge/core/_deh.h b/drivers/staging/tidspbridge/core/_deh.h
index 8ae263387a87..f1254f0aa037 100644
--- a/drivers/staging/tidspbridge/core/_deh.h
+++ b/drivers/staging/tidspbridge/core/_deh.h
@@ -27,6 +27,9 @@
 struct deh_mgr {
 	struct bridge_dev_context *hbridge_context;	/* Bridge context. */
 	struct ntfy_object *ntfy_obj;	/* NTFY object */
+
+	/* MMU Fault DPC */
+	struct tasklet_struct dpc_tasklet;
 };
 
 int mmu_fault_isr(struct iommu *mmu);
diff --git a/drivers/staging/tidspbridge/core/_tiomap.h b/drivers/staging/tidspbridge/core/_tiomap.h
index e0a801c1cb98..cd7ff8810a0b 100644
--- a/drivers/staging/tidspbridge/core/_tiomap.h
+++ b/drivers/staging/tidspbridge/core/_tiomap.h
@@ -23,7 +23,8 @@
 #include <plat/clockdomain.h>
 #include <mach-omap2/prm-regbits-34xx.h>
 #include <mach-omap2/cm-regbits-34xx.h>
-#include <dspbridge/dsp-mmu.h>
+#include <plat/iommu.h>
+#include <plat/iovmm.h>
 #include <dspbridge/devdefs.h>
 #include <dspbridge/dspioctl.h>	/* for bridge_ioctl_extproc defn */
 #include <dspbridge/sync.h>
@@ -379,4 +380,28 @@ extern s32 dsp_debug;
  */
 int sm_interrupt_dsp(struct bridge_dev_context *dev_context, u16 mb_val);
 
+/**
+ * user_to_dsp_map() - maps user to dsp virtual address
+ * @mmu:	Pointer to iommu handle.
+ * @uva:		Virtual user space address.
+ * @da		DSP address
+ * @size		Buffer size to map.
+ * @usr_pgs	struct page array pointer where the user pages will be stored
+ *
+ * This function maps a user space buffer into DSP virtual address.
+ *
+ */
+u32 user_to_dsp_map(struct iommu *mmu, u32 uva, u32 da, u32 size,
+						struct page **usr_pgs);
+
+/**
+ * user_to_dsp_unmap() - unmaps DSP virtual buffer.
+ * @mmu:	Pointer to iommu handle.
+ * @da		DSP address
+ *
+ * This function unmaps a user space buffer into DSP virtual address.
+ *
+ */
+int user_to_dsp_unmap(struct iommu *mmu, u32 da);
+
 #endif /* _TIOMAP_ */
diff --git a/drivers/staging/tidspbridge/core/dsp-mmu.c b/drivers/staging/tidspbridge/core/dsp-mmu.c
deleted file mode 100644
index 983c95adc8ff..000000000000
--- a/drivers/staging/tidspbridge/core/dsp-mmu.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * dsp-mmu.c
- *
- * DSP-BIOS Bridge driver support functions for TI OMAP processors.
- *
- * DSP iommu.
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <dspbridge/host_os.h>
-#include <plat/dmtimer.h>
-#include <dspbridge/dbdefs.h>
-#include <dspbridge/dev.h>
-#include <dspbridge/io_sm.h>
-#include <dspbridge/dspdeh.h>
-#include "_tiomap.h"
-
-#include <dspbridge/dsp-mmu.h>
-
-#define MMU_CNTL_TWL_EN		(1 << 2)
-
-static struct tasklet_struct mmu_tasklet;
-
-#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
-static void mmu_fault_print_stack(struct bridge_dev_context *dev_context)
-{
-	void *dummy_addr;
-	u32 fa, tmp;
-	struct iotlb_entry e;
-	struct iommu *mmu = dev_context->dsp_mmu;
-	dummy_addr = (void *)__get_free_page(GFP_ATOMIC);
-
-	/*
-	 * Before acking the MMU fault, let's make sure MMU can only
-	 * access entry #0. Then add a new entry so that the DSP OS
-	 * can continue in order to dump the stack.
-	 */
-	tmp = iommu_read_reg(mmu, MMU_CNTL);
-	tmp &= ~MMU_CNTL_TWL_EN;
-	iommu_write_reg(mmu, tmp, MMU_CNTL);
-	fa = iommu_read_reg(mmu, MMU_FAULT_AD);
-	e.da = fa & PAGE_MASK;
-	e.pa = virt_to_phys(dummy_addr);
-	e.valid = 1;
-	e.prsvd = 1;
-	e.pgsz = IOVMF_PGSZ_4K & MMU_CAM_PGSZ_MASK;
-	e.endian = MMU_RAM_ENDIAN_LITTLE;
-	e.elsz = MMU_RAM_ELSZ_32;
-	e.mixed = 0;
-
-	load_iotlb_entry(mmu, &e);
-
-	dsp_clk_enable(DSP_CLK_GPT8);
-
-	dsp_gpt_wait_overflow(DSP_CLK_GPT8, 0xfffffffe);
-
-	/* Clear MMU interrupt */
-	tmp = iommu_read_reg(mmu, MMU_IRQSTATUS);
-	iommu_write_reg(mmu, tmp, MMU_IRQSTATUS);
-
-	dump_dsp_stack(dev_context);
-	dsp_clk_disable(DSP_CLK_GPT8);
-
-	iopgtable_clear_entry(mmu, fa);
-	free_page((unsigned long)dummy_addr);
-}
-#endif
-
-
-static void fault_tasklet(unsigned long data)
-{
-	struct iommu *mmu = (struct iommu *)data;
-	struct bridge_dev_context *dev_ctx;
-	struct deh_mgr *dm;
-	u32 fa;
-	dev_get_deh_mgr(dev_get_first(), &dm);
-	dev_get_bridge_context(dev_get_first(), &dev_ctx);
-
-	if (!dm || !dev_ctx)
-		return;
-
-	fa = iommu_read_reg(mmu, MMU_FAULT_AD);
-
-#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
-	print_dsp_trace_buffer(dev_ctx);
-	dump_dl_modules(dev_ctx);
-	mmu_fault_print_stack(dev_ctx);
-#endif
-
-	bridge_deh_notify(dm, DSP_MMUFAULT, fa);
-}
-
-/*
- *  ======== mmu_fault_isr ========
- *      ISR to be triggered by a DSP MMU fault interrupt.
- */
-static int mmu_fault_callback(struct iommu *mmu)
-{
-	if (!mmu)
-		return -EPERM;
-
-	iommu_write_reg(mmu, 0, MMU_IRQENABLE);
-	tasklet_schedule(&mmu_tasklet);
-	return 0;
-}
-
-/**
- * dsp_mmu_init() - initialize dsp_mmu module and returns a handle
- *
- * This function initialize dsp mmu module and returns a struct iommu
- * handle to use it for dsp maps.
- *
- */
-struct iommu *dsp_mmu_init()
-{
-	struct iommu *mmu;
-
-	mmu = iommu_get("iva2");
-
-	if (!IS_ERR(mmu)) {
-		tasklet_init(&mmu_tasklet, fault_tasklet, (unsigned long)mmu);
-		mmu->isr = mmu_fault_callback;
-	}
-
-	return mmu;
-}
-
-/**
- * dsp_mmu_exit() - destroy dsp mmu module
- * @mmu:	Pointer to iommu handle.
- *
- * This function destroys dsp mmu module.
- *
- */
-void dsp_mmu_exit(struct iommu *mmu)
-{
-	if (mmu)
-		iommu_put(mmu);
-	tasklet_kill(&mmu_tasklet);
-}
-
-/**
- * user_va2_pa() - get physical address from userspace address.
- * @mm:		mm_struct Pointer of the process.
- * @address:	Virtual user space address.
- *
- */
-static u32 user_va2_pa(struct mm_struct *mm, u32 address)
-{
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *ptep, pte;
-
-	pgd = pgd_offset(mm, address);
-	if (!(pgd_none(*pgd) || pgd_bad(*pgd))) {
-		pmd = pmd_offset(pgd, address);
-		if (!(pmd_none(*pmd) || pmd_bad(*pmd))) {
-			ptep = pte_offset_map(pmd, address);
-			if (ptep) {
-				pte = *ptep;
-				if (pte_present(pte))
-					return pte & PAGE_MASK;
-			}
-		}
-	}
-
-	return 0;
-}
-
-/**
- * get_io_pages() - pin and get pages of io user's buffer.
- * @mm:		mm_struct Pointer of the process.
- * @uva:		Virtual user space address.
- * @pages	Pages to be pined.
- * @usr_pgs	struct page array pointer where the user pages will be stored
- *
- */
-static int get_io_pages(struct mm_struct *mm, u32 uva, unsigned pages,
-						struct page **usr_pgs)
-{
-	u32 pa;
-	int i;
-	struct page *pg;
-
-	for (i = 0; i < pages; i++) {
-		pa = user_va2_pa(mm, uva);
-
-		if (!pfn_valid(__phys_to_pfn(pa)))
-			break;
-
-		pg = phys_to_page(pa);
-		usr_pgs[i] = pg;
-		get_page(pg);
-	}
-	return i;
-}
-
-/**
- * user_to_dsp_map() - maps user to dsp virtual address
- * @mmu:	Pointer to iommu handle.
- * @uva:		Virtual user space address.
- * @da		DSP address
- * @size		Buffer size to map.
- * @usr_pgs	struct page array pointer where the user pages will be stored
- *
- * This function maps a user space buffer into DSP virtual address.
- *
- */
-u32 user_to_dsp_map(struct iommu *mmu, u32 uva, u32 da, u32 size,
-				struct page **usr_pgs)
-{
-	int res, w;
-	unsigned pages;
-	int i;
-	struct vm_area_struct *vma;
-	struct mm_struct *mm = current->mm;
-	struct sg_table *sgt;
-	struct scatterlist *sg;
-
-	if (!size || !usr_pgs)
-		return -EINVAL;
-
-	pages = size / PG_SIZE4K;
-
-	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, uva);
-	while (vma && (uva + size > vma->vm_end))
-		vma = find_vma(mm, vma->vm_end + 1);
-
-	if (!vma) {
-		pr_err("%s: Failed to get VMA region for 0x%x (%d)\n",
-						__func__, uva, size);
-		up_read(&mm->mmap_sem);
-		return -EINVAL;
-	}
-	if (vma->vm_flags & (VM_WRITE | VM_MAYWRITE))
-		w = 1;
-
-	if (vma->vm_flags & VM_IO)
-		i = get_io_pages(mm, uva, pages, usr_pgs);
-	else
-		i = get_user_pages(current, mm, uva, pages, w, 1,
-							usr_pgs, NULL);
-	up_read(&mm->mmap_sem);
-
-	if (i < 0)
-		return i;
-
-	if (i < pages) {
-		res = -EFAULT;
-		goto err_pages;
-	}
-
-	sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
-	if (!sgt) {
-		res = -ENOMEM;
-		goto err_pages;
-	}
-
-	res = sg_alloc_table(sgt, pages, GFP_KERNEL);
-
-	if (res < 0)
-		goto err_sg;
-
-	for_each_sg(sgt->sgl, sg, sgt->nents, i)
-		sg_set_page(sg, usr_pgs[i], PAGE_SIZE, 0);
-
-	da = iommu_vmap(mmu, da, sgt, IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
-
-	if (!IS_ERR_VALUE(da))
-		return da;
-	res = (int)da;
-
-	sg_free_table(sgt);
-err_sg:
-	kfree(sgt);
-	i = pages;
-err_pages:
-	while (i--)
-		put_page(usr_pgs[i]);
-	return res;
-}
-
-/**
- * user_to_dsp_unmap() - unmaps DSP virtual buffer.
- * @mmu:	Pointer to iommu handle.
- * @da		DSP address
- *
- * This function unmaps a user space buffer into DSP virtual address.
- *
- */
-int user_to_dsp_unmap(struct iommu *mmu, u32 da)
-{
-	unsigned i;
-	struct sg_table *sgt;
-	struct scatterlist *sg;
-
-	sgt = iommu_vunmap(mmu, da);
-	if (!sgt)
-		return -EFAULT;
-
-	for_each_sg(sgt->sgl, sg, sgt->nents, i)
-		put_page(sg_page(sg));
-	sg_free_table(sgt);
-	kfree(sgt);
-
-	return 0;
-}
diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c
index 53b38b2b9ce1..984a35a068ef 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430.c
@@ -53,6 +53,7 @@
 #include "_tiomap.h"
 #include "_tiomap_pwr.h"
 #include "tiomap_io.h"
+#include "_deh.h"
 
 /* Offset in shared mem to write to in order to synchronize start with DSP */
 #define SHMSYNCOFFSET 4		/* GPP byte offset */
@@ -67,6 +68,7 @@
 #define MMU_SMALL_PAGE_MASK      0xFFFFF000
 #define OMAP3_IVA2_BOOTADDR_MASK 0xFFFFFC00
 #define PAGES_II_LVL_TABLE   512
+#define PHYS_TO_PAGE(phys)      pfn_to_page((phys) >> PAGE_SHIFT)
 
 /*
  * This is a totally ugly layer violation, but needed until
@@ -364,16 +366,17 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 					OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 		mmu = dev_context->dsp_mmu;
 		if (mmu)
-			dsp_mmu_exit(mmu);
-		mmu = dsp_mmu_init();
+			iommu_put(mmu);
+		mmu = iommu_get("iva2");
 		if (IS_ERR(mmu)) {
-			dev_err(bridge, "dsp_mmu_init failed!\n");
+			dev_err(bridge, "iommu_get failed!\n");
 			dev_context->dsp_mmu = NULL;
 			status = (int)mmu;
 		}
 	}
 	if (!status) {
 		dev_context->dsp_mmu = mmu;
+		mmu->isr = mmu_fault_isr;
 		sm_sg = &dev_context->sh_s;
 		sg0_da = iommu_kmap(mmu, sm_sg->seg0_da, sm_sg->seg0_pa,
 			sm_sg->seg0_size, IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
@@ -629,7 +632,7 @@ static int bridge_brd_stop(struct bridge_dev_context *dev_ctxt)
 		}
 		iommu_kunmap(dev_context->dsp_mmu, dev_context->sh_s.seg0_da);
 		iommu_kunmap(dev_context->dsp_mmu, dev_context->sh_s.seg1_da);
-		dsp_mmu_exit(dev_context->dsp_mmu);
+		iommu_put(dev_context->dsp_mmu);
 		dev_context->dsp_mmu = NULL;
 	}
 	/* Reset IVA IOMMU*/
@@ -943,6 +946,173 @@ static int bridge_brd_mem_write(struct bridge_dev_context *dev_ctxt,
 	return status;
 }
 
+/*
+ *  ======== user_va2_pa ========
+ *  Purpose:
+ *      This function walks through the page tables to convert a userland
+ *      virtual address to physical address
+ */
+static u32 user_va2_pa(struct mm_struct *mm, u32 address)
+{
+	pgd_t *pgd;
+	pmd_t *pmd;
+	pte_t *ptep, pte;
+
+	pgd = pgd_offset(mm, address);
+	if (!(pgd_none(*pgd) || pgd_bad(*pgd))) {
+		pmd = pmd_offset(pgd, address);
+		if (!(pmd_none(*pmd) || pmd_bad(*pmd))) {
+			ptep = pte_offset_map(pmd, address);
+			if (ptep) {
+				pte = *ptep;
+				if (pte_present(pte))
+					return pte & PAGE_MASK;
+			}
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * get_io_pages() - pin and get pages of io user's buffer.
+ * @mm:		mm_struct Pointer of the process.
+ * @uva:		Virtual user space address.
+ * @pages	Pages to be pined.
+ * @usr_pgs	struct page array pointer where the user pages will be stored
+ *
+ */
+static int get_io_pages(struct mm_struct *mm, u32 uva, unsigned pages,
+						struct page **usr_pgs)
+{
+	u32 pa;
+	int i;
+	struct page *pg;
+
+	for (i = 0; i < pages; i++) {
+		pa = user_va2_pa(mm, uva);
+
+		if (!pfn_valid(__phys_to_pfn(pa)))
+			break;
+
+		pg = PHYS_TO_PAGE(pa);
+		usr_pgs[i] = pg;
+		get_page(pg);
+	}
+	return i;
+}
+
+/**
+ * user_to_dsp_map() - maps user to dsp virtual address
+ * @mmu:	Pointer to iommu handle.
+ * @uva:		Virtual user space address.
+ * @da		DSP address
+ * @size		Buffer size to map.
+ * @usr_pgs	struct page array pointer where the user pages will be stored
+ *
+ * This function maps a user space buffer into DSP virtual address.
+ *
+ */
+u32 user_to_dsp_map(struct iommu *mmu, u32 uva, u32 da, u32 size,
+				struct page **usr_pgs)
+{
+	int res, w;
+	unsigned pages, i;
+	struct vm_area_struct *vma;
+	struct mm_struct *mm = current->mm;
+	struct sg_table *sgt;
+	struct scatterlist *sg;
+
+	if (!size || !usr_pgs)
+		return -EINVAL;
+
+	pages = size / PG_SIZE4K;
+
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, uva);
+	while (vma && (uva + size > vma->vm_end))
+		vma = find_vma(mm, vma->vm_end + 1);
+
+	if (!vma) {
+		pr_err("%s: Failed to get VMA region for 0x%x (%d)\n",
+						__func__, uva, size);
+		up_read(&mm->mmap_sem);
+		return -EINVAL;
+	}
+	if (vma->vm_flags & (VM_WRITE | VM_MAYWRITE))
+		w = 1;
+
+	if (vma->vm_flags & VM_IO)
+		i = get_io_pages(mm, uva, pages, usr_pgs);
+	else
+		i = get_user_pages(current, mm, uva, pages, w, 1,
+							usr_pgs, NULL);
+	up_read(&mm->mmap_sem);
+
+	if (i < 0)
+		return i;
+
+	if (i < pages) {
+		res = -EFAULT;
+		goto err_pages;
+	}
+
+	sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
+	if (!sgt) {
+		res = -ENOMEM;
+		goto err_pages;
+	}
+
+	res = sg_alloc_table(sgt, pages, GFP_KERNEL);
+
+	if (res < 0)
+		goto err_sg;
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i)
+		sg_set_page(sg, usr_pgs[i], PAGE_SIZE, 0);
+
+	da = iommu_vmap(mmu, da, sgt, IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
+
+	if (!IS_ERR_VALUE(da))
+		return da;
+	res = (int)da;
+
+	sg_free_table(sgt);
+err_sg:
+	kfree(sgt);
+	i = pages;
+err_pages:
+	while (i--)
+		put_page(usr_pgs[i]);
+	return res;
+}
+
+/**
+ * user_to_dsp_unmap() - unmaps DSP virtual buffer.
+ * @mmu:	Pointer to iommu handle.
+ * @da		DSP address
+ *
+ * This function unmaps a user space buffer into DSP virtual address.
+ *
+ */
+int user_to_dsp_unmap(struct iommu *mmu, u32 da)
+{
+	unsigned i;
+	struct sg_table *sgt;
+	struct scatterlist *sg;
+
+	sgt = iommu_vunmap(mmu, da);
+	if (!sgt)
+		return -EFAULT;
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i)
+		put_page(sg_page(sg));
+	sg_free_table(sgt);
+	kfree(sgt);
+
+	return 0;
+}
+
 /*
  *  ======== wait_for_start ========
  *      Wait for the singal from DSP that it has started, or time out.
diff --git a/drivers/staging/tidspbridge/core/ue_deh.c b/drivers/staging/tidspbridge/core/ue_deh.c
index e24ea0c73914..2e1ac89644d3 100644
--- a/drivers/staging/tidspbridge/core/ue_deh.c
+++ b/drivers/staging/tidspbridge/core/ue_deh.c
@@ -31,6 +31,32 @@
 #include <dspbridge/drv.h>
 #include <dspbridge/wdt.h>
 
+#define MMU_CNTL_TWL_EN		(1 << 2)
+
+static void mmu_fault_dpc(unsigned long data)
+{
+	struct deh_mgr *deh = (void *)data;
+
+	if (!deh)
+		return;
+
+	bridge_deh_notify(deh, DSP_MMUFAULT, 0);
+}
+
+int mmu_fault_isr(struct iommu *mmu)
+{
+	struct deh_mgr *dm;
+
+	dev_get_deh_mgr(dev_get_first(), &dm);
+
+	if (!dm)
+		return -EPERM;
+
+	iommu_write_reg(mmu, 0, MMU_IRQENABLE);
+	tasklet_schedule(&dm->dpc_tasklet);
+	return 0;
+}
+
 int bridge_deh_create(struct deh_mgr **ret_deh,
 		struct dev_object *hdev_obj)
 {
@@ -58,6 +84,9 @@ int bridge_deh_create(struct deh_mgr **ret_deh,
 	}
 	ntfy_init(deh->ntfy_obj);
 
+	/* Create a MMUfault DPC */
+	tasklet_init(&deh->dpc_tasklet, mmu_fault_dpc, (u32) deh);
+
 	/* Fill in context structure */
 	deh->hbridge_context = hbridge_context;
 
@@ -81,6 +110,9 @@ int bridge_deh_destroy(struct deh_mgr *deh)
 		kfree(deh->ntfy_obj);
 	}
 
+	/* Free DPC object */
+	tasklet_kill(&deh->dpc_tasklet);
+
 	/* Deallocate the DEH manager object */
 	kfree(deh);
 
@@ -101,6 +133,51 @@ int bridge_deh_register_notify(struct deh_mgr *deh, u32 event_mask,
 		return ntfy_unregister(deh->ntfy_obj, hnotification);
 }
 
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+static void mmu_fault_print_stack(struct bridge_dev_context *dev_context)
+{
+	void *dummy_addr;
+	u32 fa, tmp;
+	struct iotlb_entry e;
+	struct iommu *mmu = dev_context->dsp_mmu;
+	dummy_addr = (void *)__get_free_page(GFP_ATOMIC);
+
+	/*
+	 * Before acking the MMU fault, let's make sure MMU can only
+	 * access entry #0. Then add a new entry so that the DSP OS
+	 * can continue in order to dump the stack.
+	 */
+	tmp = iommu_read_reg(mmu, MMU_CNTL);
+	tmp &= ~MMU_CNTL_TWL_EN;
+	iommu_write_reg(mmu, tmp, MMU_CNTL);
+	fa = iommu_read_reg(mmu, MMU_FAULT_AD);
+	e.da = fa & PAGE_MASK;
+	e.pa = virt_to_phys(dummy_addr);
+	e.valid = 1;
+	e.prsvd = 1;
+	e.pgsz = IOVMF_PGSZ_4K & MMU_CAM_PGSZ_MASK;
+	e.endian = MMU_RAM_ENDIAN_LITTLE;
+	e.elsz = MMU_RAM_ELSZ_32;
+	e.mixed = 0;
+
+	load_iotlb_entry(dev_context->dsp_mmu, &e);
+
+	dsp_clk_enable(DSP_CLK_GPT8);
+
+	dsp_gpt_wait_overflow(DSP_CLK_GPT8, 0xfffffffe);
+
+	/* Clear MMU interrupt */
+	tmp = iommu_read_reg(mmu, MMU_IRQSTATUS);
+	iommu_write_reg(mmu, tmp, MMU_IRQSTATUS);
+
+	dump_dsp_stack(dev_context);
+	dsp_clk_disable(DSP_CLK_GPT8);
+
+	iopgtable_clear_entry(mmu, fa);
+	free_page((unsigned long)dummy_addr);
+}
+#endif
+
 static inline const char *event_to_string(int event)
 {
 	switch (event) {
@@ -116,6 +193,7 @@ void bridge_deh_notify(struct deh_mgr *deh, int event, int info)
 {
 	struct bridge_dev_context *dev_context;
 	const char *str = event_to_string(event);
+	u32 fa;
 
 	if (!deh)
 		return;
@@ -133,7 +211,13 @@ void bridge_deh_notify(struct deh_mgr *deh, int event, int info)
 #endif
 		break;
 	case DSP_MMUFAULT:
-		dev_err(bridge, "%s: %s, addr=0x%x", __func__, str, info);
+		fa = iommu_read_reg(dev_context->dsp_mmu, MMU_FAULT_AD);
+		dev_err(bridge, "%s: %s, addr=0x%x", __func__, str, fa);
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+		print_dsp_trace_buffer(dev_context);
+		dump_dl_modules(dev_context);
+		mmu_fault_print_stack(dev_context);
+#endif
 		break;
 	default:
 		dev_err(bridge, "%s: %s", __func__, str);
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dsp-mmu.h b/drivers/staging/tidspbridge/include/dspbridge/dsp-mmu.h
deleted file mode 100644
index cb38d4cc0734..000000000000
--- a/drivers/staging/tidspbridge/include/dspbridge/dsp-mmu.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * dsp-mmu.h
- *
- * DSP-BIOS Bridge driver support functions for TI OMAP processors.
- *
- * DSP iommu.
- *
- * Copyright (C) 2005-2010 Texas Instruments, Inc.
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _DSP_MMU_
-#define _DSP_MMU_
-
-#include <plat/iommu.h>
-#include <plat/iovmm.h>
-
-/**
- * dsp_mmu_init() - initialize dsp_mmu module and returns a handle
- *
- * This function initialize dsp mmu module and returns a struct iommu
- * handle to use it for dsp maps.
- *
- */
-struct iommu *dsp_mmu_init(void);
-
-/**
- * dsp_mmu_exit() - destroy dsp mmu module
- * @mmu:	Pointer to iommu handle.
- *
- * This function destroys dsp mmu module.
- *
- */
-void dsp_mmu_exit(struct iommu *mmu);
-
-/**
- * user_to_dsp_map() - maps user to dsp virtual address
- * @mmu:	Pointer to iommu handle.
- * @uva:		Virtual user space address.
- * @da		DSP address
- * @size		Buffer size to map.
- * @usr_pgs	struct page array pointer where the user pages will be stored
- *
- * This function maps a user space buffer into DSP virtual address.
- *
- */
-u32 user_to_dsp_map(struct iommu *mmu, u32 uva, u32 da, u32 size,
-						struct page **usr_pgs);
-
-/**
- * user_to_dsp_unmap() - unmaps DSP virtual buffer.
- * @mmu:	Pointer to iommu handle.
- * @da		DSP address
- *
- * This function unmaps a user space buffer into DSP virtual address.
- *
- */
-int user_to_dsp_unmap(struct iommu *mmu, u32 da);
-
-#endif

From 58c1ceb156df5a005f7fc9afc75064a2c1df4b65 Mon Sep 17 00:00:00 2001
From: Felipe Contreras <felipe.contreras@gmail.com>
Date: Wed, 10 Nov 2010 12:11:35 -0600
Subject: [PATCH 0443/1066] Revert "staging: tidspbridge - remove hw directory"

This reverts commit 053fdb85f56e84bff64a65601be7f72608f016da.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
---
 drivers/staging/tidspbridge/Makefile          |   3 +-
 drivers/staging/tidspbridge/core/_tiomap.h    |   1 +
 drivers/staging/tidspbridge/core/io_sm.c      |   4 +
 drivers/staging/tidspbridge/core/tiomap3430.c |   4 +
 .../staging/tidspbridge/core/tiomap3430_pwr.c |   4 +
 drivers/staging/tidspbridge/core/tiomap_io.c  |   2 +-
 drivers/staging/tidspbridge/hw/EasiGlobal.h   |  41 ++
 drivers/staging/tidspbridge/hw/MMUAccInt.h    |  76 +++
 drivers/staging/tidspbridge/hw/MMURegAcM.h    | 225 +++++++
 drivers/staging/tidspbridge/hw/hw_defs.h      |  58 ++
 drivers/staging/tidspbridge/hw/hw_mmu.c       | 562 ++++++++++++++++++
 drivers/staging/tidspbridge/hw/hw_mmu.h       | 163 +++++
 .../tidspbridge/include/dspbridge/dspioctl.h  |   7 +
 13 files changed, 1148 insertions(+), 2 deletions(-)
 create mode 100644 drivers/staging/tidspbridge/hw/EasiGlobal.h
 create mode 100644 drivers/staging/tidspbridge/hw/MMUAccInt.h
 create mode 100644 drivers/staging/tidspbridge/hw/MMURegAcM.h
 create mode 100644 drivers/staging/tidspbridge/hw/hw_defs.h
 create mode 100644 drivers/staging/tidspbridge/hw/hw_mmu.c
 create mode 100644 drivers/staging/tidspbridge/hw/hw_mmu.h

diff --git a/drivers/staging/tidspbridge/Makefile b/drivers/staging/tidspbridge/Makefile
index 1a091faac046..41c644c3318f 100644
--- a/drivers/staging/tidspbridge/Makefile
+++ b/drivers/staging/tidspbridge/Makefile
@@ -11,9 +11,10 @@ librmgr = rmgr/dbdcd.o rmgr/disp.o rmgr/drv.o rmgr/mgr.o rmgr/node.o \
 		rmgr/nldr.o rmgr/drv_interface.o
 libdload = dynload/cload.o dynload/getsection.o dynload/reloc.o \
 		 dynload/tramp.o
+libhw = hw/hw_mmu.o
 
 bridgedriver-y := $(libgen) $(libservices) $(libcore) $(libpmgr) $(librmgr) \
-			$(libdload)
+			$(libdload) $(libhw)
 
 #Machine dependent
 ccflags-y += -D_TI_ -D_DB_TIOMAP -DTMS32060 \
diff --git a/drivers/staging/tidspbridge/core/_tiomap.h b/drivers/staging/tidspbridge/core/_tiomap.h
index cd7ff8810a0b..394a64a7ba21 100644
--- a/drivers/staging/tidspbridge/core/_tiomap.h
+++ b/drivers/staging/tidspbridge/core/_tiomap.h
@@ -26,6 +26,7 @@
 #include <plat/iommu.h>
 #include <plat/iovmm.h>
 #include <dspbridge/devdefs.h>
+#include <hw_defs.h>
 #include <dspbridge/dspioctl.h>	/* for bridge_ioctl_extproc defn */
 #include <dspbridge/sync.h>
 #include <dspbridge/clk.h>
diff --git a/drivers/staging/tidspbridge/core/io_sm.c b/drivers/staging/tidspbridge/core/io_sm.c
index 194badaba0ed..56856ad54fec 100644
--- a/drivers/staging/tidspbridge/core/io_sm.c
+++ b/drivers/staging/tidspbridge/core/io_sm.c
@@ -39,6 +39,10 @@
 #include <dspbridge/ntfy.h>
 #include <dspbridge/sync.h>
 
+/* Hardware Abstraction Layer */
+#include <hw_defs.h>
+#include <hw_mmu.h>
+
 /* Bridge Driver */
 #include <dspbridge/dspdeh.h>
 #include <dspbridge/dspio.h>
diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c
index 984a35a068ef..b68050a969a6 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430.c
@@ -34,6 +34,10 @@
 #include <dspbridge/drv.h>
 #include <dspbridge/sync.h>
 
+/* ------------------------------------ Hardware Abstraction Layer */
+#include <hw_defs.h>
+#include <hw_mmu.h>
+
 /*  ----------------------------------- Link Driver */
 #include <dspbridge/dspdefs.h>
 #include <dspbridge/dspchnl.h>
diff --git a/drivers/staging/tidspbridge/core/tiomap3430_pwr.c b/drivers/staging/tidspbridge/core/tiomap3430_pwr.c
index b57a9fd5e757..fb9026e1403c 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430_pwr.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430_pwr.c
@@ -31,6 +31,10 @@
 #include <dspbridge/dev.h>
 #include <dspbridge/iodefs.h>
 
+/* ------------------------------------ Hardware Abstraction Layer */
+#include <hw_defs.h>
+#include <hw_mmu.h>
+
 #include <dspbridge/pwr_sh.h>
 
 /*  ----------------------------------- Bridge Driver */
diff --git a/drivers/staging/tidspbridge/core/tiomap_io.c b/drivers/staging/tidspbridge/core/tiomap_io.c
index b526532fdd07..5ba679577354 100644
--- a/drivers/staging/tidspbridge/core/tiomap_io.c
+++ b/drivers/staging/tidspbridge/core/tiomap_io.c
@@ -143,7 +143,7 @@ int read_ext_dsp_data(struct bridge_dev_context *dev_ctxt,
 				    ul_shm_base_virt - ul_tlb_base_virt;
 				ul_shm_offset_virt +=
 				    PG_ALIGN_HIGH(ul_ext_end - ul_dyn_ext_base +
-						  1, PAGE_SIZE * 16);
+						  1, HW_PAGE_SIZE64KB);
 				dw_ext_prog_virt_mem -= ul_shm_offset_virt;
 				dw_ext_prog_virt_mem +=
 				    (ul_ext_base - ul_dyn_ext_base);
diff --git a/drivers/staging/tidspbridge/hw/EasiGlobal.h b/drivers/staging/tidspbridge/hw/EasiGlobal.h
new file mode 100644
index 000000000000..e48d7f67c60a
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/EasiGlobal.h
@@ -0,0 +1,41 @@
+/*
+ * EasiGlobal.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _EASIGLOBAL_H
+#define _EASIGLOBAL_H
+#include <linux/types.h>
+
+/*
+ * DEFINE:        READ_ONLY, WRITE_ONLY &  READ_WRITE
+ *
+ * DESCRIPTION: Defines used to describe register types for EASI-checker tests.
+ */
+
+#define READ_ONLY    1
+#define WRITE_ONLY   2
+#define READ_WRITE   3
+
+/*
+ * MACRO:        _DEBUG_LEVEL1_EASI
+ *
+ * DESCRIPTION:  A MACRO which can be used to indicate that a particular beach
+ *               register access function was called.
+ *
+ * NOTE:         We currently dont use this functionality.
+ */
+#define _DEBUG_LEVEL1_EASI(easi_num)     ((void)0)
+
+#endif /* _EASIGLOBAL_H */
diff --git a/drivers/staging/tidspbridge/hw/MMUAccInt.h b/drivers/staging/tidspbridge/hw/MMUAccInt.h
new file mode 100644
index 000000000000..1cefca321d71
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/MMUAccInt.h
@@ -0,0 +1,76 @@
+/*
+ * MMUAccInt.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _MMU_ACC_INT_H
+#define _MMU_ACC_INT_H
+
+/* Mappings of level 1 EASI function numbers to function names */
+
+#define EASIL1_MMUMMU_SYSCONFIG_READ_REGISTER32 (MMU_BASE_EASIL1 + 3)
+#define EASIL1_MMUMMU_SYSCONFIG_IDLE_MODE_WRITE32  (MMU_BASE_EASIL1 + 17)
+#define EASIL1_MMUMMU_SYSCONFIG_AUTO_IDLE_WRITE32    (MMU_BASE_EASIL1 + 39)
+#define EASIL1_MMUMMU_IRQSTATUS_WRITE_REGISTER32   (MMU_BASE_EASIL1 + 51)
+#define EASIL1_MMUMMU_IRQENABLE_READ_REGISTER32 (MMU_BASE_EASIL1 + 102)
+#define EASIL1_MMUMMU_IRQENABLE_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 103)
+#define EASIL1_MMUMMU_WALKING_STTWL_RUNNING_READ32 (MMU_BASE_EASIL1 + 156)
+#define EASIL1_MMUMMU_CNTLTWL_ENABLE_READ32 (MMU_BASE_EASIL1 + 174)
+#define EASIL1_MMUMMU_CNTLTWL_ENABLE_WRITE32   (MMU_BASE_EASIL1 + 180)
+#define EASIL1_MMUMMU_CNTLMMU_ENABLE_WRITE32     (MMU_BASE_EASIL1 + 190)
+#define EASIL1_MMUMMU_FAULT_AD_READ_REGISTER32   (MMU_BASE_EASIL1 + 194)
+#define EASIL1_MMUMMU_TTB_WRITE_REGISTER32  (MMU_BASE_EASIL1 + 198)
+#define EASIL1_MMUMMU_LOCK_READ_REGISTER32   (MMU_BASE_EASIL1 + 203)
+#define EASIL1_MMUMMU_LOCK_WRITE_REGISTER32  (MMU_BASE_EASIL1 + 204)
+#define EASIL1_MMUMMU_LOCK_BASE_VALUE_READ32  (MMU_BASE_EASIL1 + 205)
+#define EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_READ32 (MMU_BASE_EASIL1 + 209)
+#define EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_WRITE32 (MMU_BASE_EASIL1 + 211)
+#define EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_SET32  (MMU_BASE_EASIL1 + 212)
+#define EASIL1_MMUMMU_LD_TLB_READ_REGISTER32    (MMU_BASE_EASIL1 + 213)
+#define EASIL1_MMUMMU_LD_TLB_WRITE_REGISTER32   (MMU_BASE_EASIL1 + 214)
+#define EASIL1_MMUMMU_CAM_WRITE_REGISTER32   (MMU_BASE_EASIL1 + 226)
+#define EASIL1_MMUMMU_RAM_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 268)
+#define EASIL1_MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32  (MMU_BASE_EASIL1 + 322)
+
+/* Register offset address definitions */
+#define MMU_MMU_SYSCONFIG_OFFSET   0x10
+#define MMU_MMU_IRQSTATUS_OFFSET  0x18
+#define MMU_MMU_IRQENABLE_OFFSET    0x1c
+#define MMU_MMU_WALKING_ST_OFFSET 0x40
+#define MMU_MMU_CNTL_OFFSET   0x44
+#define MMU_MMU_FAULT_AD_OFFSET  0x48
+#define MMU_MMU_TTB_OFFSET  0x4c
+#define MMU_MMU_LOCK_OFFSET   0x50
+#define MMU_MMU_LD_TLB_OFFSET  0x54
+#define MMU_MMU_CAM_OFFSET   0x58
+#define MMU_MMU_RAM_OFFSET   0x5c
+#define MMU_MMU_GFLUSH_OFFSET  0x60
+#define MMU_MMU_FLUSH_ENTRY_OFFSET  0x64
+/* Bitfield mask and offset declarations */
+#define MMU_MMU_SYSCONFIG_IDLE_MODE_MASK  0x18
+#define MMU_MMU_SYSCONFIG_IDLE_MODE_OFFSET  3
+#define MMU_MMU_SYSCONFIG_AUTO_IDLE_MASK  0x1
+#define MMU_MMU_SYSCONFIG_AUTO_IDLE_OFFSET   0
+#define MMU_MMU_WALKING_ST_TWL_RUNNING_MASK 0x1
+#define MMU_MMU_WALKING_ST_TWL_RUNNING_OFFSET  0
+#define MMU_MMU_CNTL_TWL_ENABLE_MASK 0x4
+#define MMU_MMU_CNTL_TWL_ENABLE_OFFSET 2
+#define MMU_MMU_CNTL_MMU_ENABLE_MASK    0x2
+#define MMU_MMU_CNTL_MMU_ENABLE_OFFSET   1
+#define MMU_MMU_LOCK_BASE_VALUE_MASK 0xfc00
+#define MMU_MMU_LOCK_BASE_VALUE_OFFSET   10
+#define MMU_MMU_LOCK_CURRENT_VICTIM_MASK   0x3f0
+#define MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET    4
+
+#endif /* _MMU_ACC_INT_H */
diff --git a/drivers/staging/tidspbridge/hw/MMURegAcM.h b/drivers/staging/tidspbridge/hw/MMURegAcM.h
new file mode 100644
index 000000000000..ab1a16da731c
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/MMURegAcM.h
@@ -0,0 +1,225 @@
+/*
+ * MMURegAcM.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _MMU_REG_ACM_H
+#define _MMU_REG_ACM_H
+
+#include <linux/io.h>
+#include <EasiGlobal.h>
+
+#include "MMUAccInt.h"
+
+#if defined(USE_LEVEL_1_MACROS)
+
+#define MMUMMU_SYSCONFIG_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_SYSCONFIG_READ_REGISTER32),\
+      __raw_readl((base_address)+MMU_MMU_SYSCONFIG_OFFSET))
+
+#define MMUMMU_SYSCONFIG_IDLE_MODE_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_SYSCONFIG_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_SYSCONFIG_IDLE_MODE_WRITE32);\
+    data &= ~(MMU_MMU_SYSCONFIG_IDLE_MODE_MASK);\
+    new_value <<= MMU_MMU_SYSCONFIG_IDLE_MODE_OFFSET;\
+    new_value &= MMU_MMU_SYSCONFIG_IDLE_MODE_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_SYSCONFIG_AUTO_IDLE_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_SYSCONFIG_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_SYSCONFIG_AUTO_IDLE_WRITE32);\
+    data &= ~(MMU_MMU_SYSCONFIG_AUTO_IDLE_MASK);\
+    new_value <<= MMU_MMU_SYSCONFIG_AUTO_IDLE_OFFSET;\
+    new_value &= MMU_MMU_SYSCONFIG_AUTO_IDLE_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_IRQSTATUS_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(easil1_mmummu_irqstatus_read_register32),\
+      __raw_readl((base_address)+MMU_MMU_IRQSTATUS_OFFSET))
+
+#define MMUMMU_IRQSTATUS_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_IRQSTATUS_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_IRQSTATUS_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_IRQENABLE_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_IRQENABLE_READ_REGISTER32),\
+      __raw_readl((base_address)+MMU_MMU_IRQENABLE_OFFSET))
+
+#define MMUMMU_IRQENABLE_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_IRQENABLE_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_IRQENABLE_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_WALKING_STTWL_RUNNING_READ32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_WALKING_STTWL_RUNNING_READ32),\
+      (((__raw_readl(((base_address)+(MMU_MMU_WALKING_ST_OFFSET))))\
+      & MMU_MMU_WALKING_ST_TWL_RUNNING_MASK) >>\
+      MMU_MMU_WALKING_ST_TWL_RUNNING_OFFSET))
+
+#define MMUMMU_CNTLTWL_ENABLE_READ32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CNTLTWL_ENABLE_READ32),\
+      (((__raw_readl(((base_address)+(MMU_MMU_CNTL_OFFSET)))) &\
+      MMU_MMU_CNTL_TWL_ENABLE_MASK) >>\
+      MMU_MMU_CNTL_TWL_ENABLE_OFFSET))
+
+#define MMUMMU_CNTLTWL_ENABLE_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_CNTL_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CNTLTWL_ENABLE_WRITE32);\
+    data &= ~(MMU_MMU_CNTL_TWL_ENABLE_MASK);\
+    new_value <<= MMU_MMU_CNTL_TWL_ENABLE_OFFSET;\
+    new_value &= MMU_MMU_CNTL_TWL_ENABLE_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_CNTLMMU_ENABLE_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_CNTL_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CNTLMMU_ENABLE_WRITE32);\
+    data &= ~(MMU_MMU_CNTL_MMU_ENABLE_MASK);\
+    new_value <<= MMU_MMU_CNTL_MMU_ENABLE_OFFSET;\
+    new_value &= MMU_MMU_CNTL_MMU_ENABLE_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_FAULT_AD_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_FAULT_AD_READ_REGISTER32),\
+      __raw_readl((base_address)+MMU_MMU_FAULT_AD_OFFSET))
+
+#define MMUMMU_TTB_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_TTB_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_TTB_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_LOCK_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_READ_REGISTER32),\
+      __raw_readl((base_address)+MMU_MMU_LOCK_OFFSET))
+
+#define MMUMMU_LOCK_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_LOCK_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_LOCK_BASE_VALUE_READ32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_BASE_VALUE_READ32),\
+      (((__raw_readl(((base_address)+(MMU_MMU_LOCK_OFFSET)))) &\
+      MMU_MMU_LOCK_BASE_VALUE_MASK) >>\
+      MMU_MMU_LOCK_BASE_VALUE_OFFSET))
+
+#define MMUMMU_LOCK_BASE_VALUE_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_LOCK_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(easil1_mmummu_lock_base_value_write32);\
+    data &= ~(MMU_MMU_LOCK_BASE_VALUE_MASK);\
+    new_value <<= MMU_MMU_LOCK_BASE_VALUE_OFFSET;\
+    new_value &= MMU_MMU_LOCK_BASE_VALUE_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_LOCK_CURRENT_VICTIM_READ32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_READ32),\
+      (((__raw_readl(((base_address)+(MMU_MMU_LOCK_OFFSET)))) &\
+      MMU_MMU_LOCK_CURRENT_VICTIM_MASK) >>\
+      MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET))
+
+#define MMUMMU_LOCK_CURRENT_VICTIM_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_LOCK_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_WRITE32);\
+    data &= ~(MMU_MMU_LOCK_CURRENT_VICTIM_MASK);\
+    new_value <<= MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET;\
+    new_value &= MMU_MMU_LOCK_CURRENT_VICTIM_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_LOCK_CURRENT_VICTIM_SET32(var, value)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_SET32),\
+      (((var) & ~(MMU_MMU_LOCK_CURRENT_VICTIM_MASK)) |\
+      (((value) << MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET) &\
+      MMU_MMU_LOCK_CURRENT_VICTIM_MASK)))
+
+#define MMUMMU_LD_TLB_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LD_TLB_READ_REGISTER32),\
+      __raw_readl((base_address)+MMU_MMU_LD_TLB_OFFSET))
+
+#define MMUMMU_LD_TLB_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_LD_TLB_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LD_TLB_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_CAM_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_CAM_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CAM_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_RAM_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_RAM_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_RAM_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_FLUSH_ENTRY_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#endif /* USE_LEVEL_1_MACROS */
+
+#endif /* _MMU_REG_ACM_H */
diff --git a/drivers/staging/tidspbridge/hw/hw_defs.h b/drivers/staging/tidspbridge/hw/hw_defs.h
new file mode 100644
index 000000000000..d5266d4c163f
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/hw_defs.h
@@ -0,0 +1,58 @@
+/*
+ * hw_defs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global HW definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _HW_DEFS_H
+#define _HW_DEFS_H
+
+/* Page size */
+#define HW_PAGE_SIZE4KB   0x1000
+#define HW_PAGE_SIZE64KB  0x10000
+#define HW_PAGE_SIZE1MB   0x100000
+#define HW_PAGE_SIZE16MB  0x1000000
+
+/* hw_status:  return type for HW API */
+typedef long hw_status;
+
+/*  Macro used to set and clear any bit */
+#define HW_CLEAR	0
+#define HW_SET		1
+
+/* hw_endianism_t:  Enumerated Type used to specify the endianism
+ *		Do NOT change these values. They are used as bit fields. */
+enum hw_endianism_t {
+	HW_LITTLE_ENDIAN,
+	HW_BIG_ENDIAN
+};
+
+/* hw_element_size_t:  Enumerated Type used to specify the element size
+ *		Do NOT change these values. They are used as bit fields. */
+enum hw_element_size_t {
+	HW_ELEM_SIZE8BIT,
+	HW_ELEM_SIZE16BIT,
+	HW_ELEM_SIZE32BIT,
+	HW_ELEM_SIZE64BIT
+};
+
+/* hw_idle_mode_t:  Enumerated Type used to specify Idle modes */
+enum hw_idle_mode_t {
+	HW_FORCE_IDLE,
+	HW_NO_IDLE,
+	HW_SMART_IDLE
+};
+
+#endif /* _HW_DEFS_H */
diff --git a/drivers/staging/tidspbridge/hw/hw_mmu.c b/drivers/staging/tidspbridge/hw/hw_mmu.c
new file mode 100644
index 000000000000..014f5d5293ae
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/hw_mmu.c
@@ -0,0 +1,562 @@
+/*
+ * hw_mmu.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * API definitions to setup MMU TLB and PTE
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/io.h>
+#include "MMURegAcM.h"
+#include <hw_defs.h>
+#include <hw_mmu.h>
+#include <linux/types.h>
+#include <linux/err.h>
+
+#define MMU_BASE_VAL_MASK	0xFC00
+#define MMU_PAGE_MAX	     3
+#define MMU_ELEMENTSIZE_MAX      3
+#define MMU_ADDR_MASK	    0xFFFFF000
+#define MMU_TTB_MASK	     0xFFFFC000
+#define MMU_SECTION_ADDR_MASK    0xFFF00000
+#define MMU_SSECTION_ADDR_MASK   0xFF000000
+#define MMU_PAGE_TABLE_MASK      0xFFFFFC00
+#define MMU_LARGE_PAGE_MASK      0xFFFF0000
+#define MMU_SMALL_PAGE_MASK      0xFFFFF000
+
+#define MMU_LOAD_TLB	0x00000001
+#define MMU_GFLUSH	0x60
+
+/*
+ * hw_mmu_page_size_t: Enumerated Type used to specify the MMU Page Size(SLSS)
+ */
+enum hw_mmu_page_size_t {
+	HW_MMU_SECTION,
+	HW_MMU_LARGE_PAGE,
+	HW_MMU_SMALL_PAGE,
+	HW_MMU_SUPERSECTION
+};
+
+/*
+ * FUNCTION	      : mmu_flush_entry
+ *
+ * INPUTS:
+ *
+ *       Identifier      : base_address
+ *       Type		: const u32
+ *       Description     : Base Address of instance of MMU module
+ *
+ * RETURNS:
+ *
+ *       Type		: hw_status
+ *       Description     : 0		 -- No errors occured
+ *			 RET_BAD_NULL_PARAM     -- A Pointer
+ *						Paramater was set to NULL
+ *
+ * PURPOSE:	      : Flush the TLB entry pointed by the
+ *			lock counter register
+ *			even if this entry is set protected
+ *
+ * METHOD:	       : Check the Input parameter and Flush a
+ *			 single entry in the TLB.
+ */
+static hw_status mmu_flush_entry(const void __iomem *base_address);
+
+/*
+ * FUNCTION	      : mmu_set_cam_entry
+ *
+ * INPUTS:
+ *
+ *       Identifier      : base_address
+ *       TypE		: const u32
+ *       Description     : Base Address of instance of MMU module
+ *
+ *       Identifier      : page_sz
+ *       TypE		: const u32
+ *       Description     : It indicates the page size
+ *
+ *       Identifier      : preserved_bit
+ *       Type		: const u32
+ *       Description     : It indicates the TLB entry is preserved entry
+ *							or not
+ *
+ *       Identifier      : valid_bit
+ *       Type		: const u32
+ *       Description     : It indicates the TLB entry is valid entry or not
+ *
+ *
+ *       Identifier      : virtual_addr_tag
+ *       Type	    	: const u32
+ *       Description     : virtual Address
+ *
+ * RETURNS:
+ *
+ *       Type	    	: hw_status
+ *       Description     : 0		 -- No errors occured
+ *			 RET_BAD_NULL_PARAM     -- A Pointer Paramater
+ *						   was set to NULL
+ *			 RET_PARAM_OUT_OF_RANGE -- Input Parameter out
+ *						   of Range
+ *
+ * PURPOSE:	      	: Set MMU_CAM reg
+ *
+ * METHOD:	       	: Check the Input parameters and set the CAM entry.
+ */
+static hw_status mmu_set_cam_entry(const void __iomem *base_address,
+				   const u32 page_sz,
+				   const u32 preserved_bit,
+				   const u32 valid_bit,
+				   const u32 virtual_addr_tag);
+
+/*
+ * FUNCTION	      : mmu_set_ram_entry
+ *
+ * INPUTS:
+ *
+ *       Identifier      : base_address
+ *       Type	    	: const u32
+ *       Description     : Base Address of instance of MMU module
+ *
+ *       Identifier      : physical_addr
+ *       Type	    	: const u32
+ *       Description     : Physical Address to which the corresponding
+ *			 virtual   Address shouldpoint
+ *
+ *       Identifier      : endianism
+ *       Type	    	: hw_endianism_t
+ *       Description     : endianism for the given page
+ *
+ *       Identifier      : element_size
+ *       Type	    	: hw_element_size_t
+ *       Description     : The element size ( 8,16, 32 or 64 bit)
+ *
+ *       Identifier      : mixed_size
+ *       Type	    	: hw_mmu_mixed_size_t
+ *       Description     : Element Size to follow CPU or TLB
+ *
+ * RETURNS:
+ *
+ *       Type	    	: hw_status
+ *       Description     : 0		 -- No errors occured
+ *			 RET_BAD_NULL_PARAM     -- A Pointer Paramater
+ *							was set to NULL
+ *			 RET_PARAM_OUT_OF_RANGE -- Input Parameter
+ *							out of Range
+ *
+ * PURPOSE:	      : Set MMU_CAM reg
+ *
+ * METHOD:	       : Check the Input parameters and set the RAM entry.
+ */
+static hw_status mmu_set_ram_entry(const void __iomem *base_address,
+				   const u32 physical_addr,
+				   enum hw_endianism_t endianism,
+				   enum hw_element_size_t element_size,
+				   enum hw_mmu_mixed_size_t mixed_size);
+
+/* HW FUNCTIONS */
+
+hw_status hw_mmu_enable(const void __iomem *base_address)
+{
+	hw_status status = 0;
+
+	MMUMMU_CNTLMMU_ENABLE_WRITE32(base_address, HW_SET);
+
+	return status;
+}
+
+hw_status hw_mmu_disable(const void __iomem *base_address)
+{
+	hw_status status = 0;
+
+	MMUMMU_CNTLMMU_ENABLE_WRITE32(base_address, HW_CLEAR);
+
+	return status;
+}
+
+hw_status hw_mmu_num_locked_set(const void __iomem *base_address,
+				u32 num_locked_entries)
+{
+	hw_status status = 0;
+
+	MMUMMU_LOCK_BASE_VALUE_WRITE32(base_address, num_locked_entries);
+
+	return status;
+}
+
+hw_status hw_mmu_victim_num_set(const void __iomem *base_address,
+				u32 victim_entry_num)
+{
+	hw_status status = 0;
+
+	MMUMMU_LOCK_CURRENT_VICTIM_WRITE32(base_address, victim_entry_num);
+
+	return status;
+}
+
+hw_status hw_mmu_event_ack(const void __iomem *base_address, u32 irq_mask)
+{
+	hw_status status = 0;
+
+	MMUMMU_IRQSTATUS_WRITE_REGISTER32(base_address, irq_mask);
+
+	return status;
+}
+
+hw_status hw_mmu_event_disable(const void __iomem *base_address, u32 irq_mask)
+{
+	hw_status status = 0;
+	u32 irq_reg;
+
+	irq_reg = MMUMMU_IRQENABLE_READ_REGISTER32(base_address);
+
+	MMUMMU_IRQENABLE_WRITE_REGISTER32(base_address, irq_reg & ~irq_mask);
+
+	return status;
+}
+
+hw_status hw_mmu_event_enable(const void __iomem *base_address, u32 irq_mask)
+{
+	hw_status status = 0;
+	u32 irq_reg;
+
+	irq_reg = MMUMMU_IRQENABLE_READ_REGISTER32(base_address);
+
+	MMUMMU_IRQENABLE_WRITE_REGISTER32(base_address, irq_reg | irq_mask);
+
+	return status;
+}
+
+hw_status hw_mmu_event_status(const void __iomem *base_address, u32 *irq_mask)
+{
+	hw_status status = 0;
+
+	*irq_mask = MMUMMU_IRQSTATUS_READ_REGISTER32(base_address);
+
+	return status;
+}
+
+hw_status hw_mmu_fault_addr_read(const void __iomem *base_address, u32 *addr)
+{
+	hw_status status = 0;
+
+	/* read values from register */
+	*addr = MMUMMU_FAULT_AD_READ_REGISTER32(base_address);
+
+	return status;
+}
+
+hw_status hw_mmu_ttb_set(const void __iomem *base_address, u32 ttb_phys_addr)
+{
+	hw_status status = 0;
+	u32 load_ttb;
+
+	load_ttb = ttb_phys_addr & ~0x7FUL;
+	/* write values to register */
+	MMUMMU_TTB_WRITE_REGISTER32(base_address, load_ttb);
+
+	return status;
+}
+
+hw_status hw_mmu_twl_enable(const void __iomem *base_address)
+{
+	hw_status status = 0;
+
+	MMUMMU_CNTLTWL_ENABLE_WRITE32(base_address, HW_SET);
+
+	return status;
+}
+
+hw_status hw_mmu_twl_disable(const void __iomem *base_address)
+{
+	hw_status status = 0;
+
+	MMUMMU_CNTLTWL_ENABLE_WRITE32(base_address, HW_CLEAR);
+
+	return status;
+}
+
+hw_status hw_mmu_tlb_flush(const void __iomem *base_address, u32 virtual_addr,
+			   u32 page_sz)
+{
+	hw_status status = 0;
+	u32 virtual_addr_tag;
+	enum hw_mmu_page_size_t pg_size_bits;
+
+	switch (page_sz) {
+	case HW_PAGE_SIZE4KB:
+		pg_size_bits = HW_MMU_SMALL_PAGE;
+		break;
+
+	case HW_PAGE_SIZE64KB:
+		pg_size_bits = HW_MMU_LARGE_PAGE;
+		break;
+
+	case HW_PAGE_SIZE1MB:
+		pg_size_bits = HW_MMU_SECTION;
+		break;
+
+	case HW_PAGE_SIZE16MB:
+		pg_size_bits = HW_MMU_SUPERSECTION;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	/* Generate the 20-bit tag from virtual address */
+	virtual_addr_tag = ((virtual_addr & MMU_ADDR_MASK) >> 12);
+
+	mmu_set_cam_entry(base_address, pg_size_bits, 0, 0, virtual_addr_tag);
+
+	mmu_flush_entry(base_address);
+
+	return status;
+}
+
+hw_status hw_mmu_tlb_add(const void __iomem *base_address,
+			 u32 physical_addr,
+			 u32 virtual_addr,
+			 u32 page_sz,
+			 u32 entry_num,
+			 struct hw_mmu_map_attrs_t *map_attrs,
+			 s8 preserved_bit, s8 valid_bit)
+{
+	hw_status status = 0;
+	u32 lock_reg;
+	u32 virtual_addr_tag;
+	enum hw_mmu_page_size_t mmu_pg_size;
+
+	/*Check the input Parameters */
+	switch (page_sz) {
+	case HW_PAGE_SIZE4KB:
+		mmu_pg_size = HW_MMU_SMALL_PAGE;
+		break;
+
+	case HW_PAGE_SIZE64KB:
+		mmu_pg_size = HW_MMU_LARGE_PAGE;
+		break;
+
+	case HW_PAGE_SIZE1MB:
+		mmu_pg_size = HW_MMU_SECTION;
+		break;
+
+	case HW_PAGE_SIZE16MB:
+		mmu_pg_size = HW_MMU_SUPERSECTION;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	lock_reg = MMUMMU_LOCK_READ_REGISTER32(base_address);
+
+	/* Generate the 20-bit tag from virtual address */
+	virtual_addr_tag = ((virtual_addr & MMU_ADDR_MASK) >> 12);
+
+	/* Write the fields in the CAM Entry Register */
+	mmu_set_cam_entry(base_address, mmu_pg_size, preserved_bit, valid_bit,
+			  virtual_addr_tag);
+
+	/* Write the different fields of the RAM Entry Register */
+	/* endianism of the page,Element Size of the page (8, 16, 32, 64 bit) */
+	mmu_set_ram_entry(base_address, physical_addr, map_attrs->endianism,
+			  map_attrs->element_size, map_attrs->mixed_size);
+
+	/* Update the MMU Lock Register */
+	/* currentVictim between lockedBaseValue and (MMU_Entries_Number - 1) */
+	MMUMMU_LOCK_CURRENT_VICTIM_WRITE32(base_address, entry_num);
+
+	/* Enable loading of an entry in TLB by writing 1
+	   into LD_TLB_REG register */
+	MMUMMU_LD_TLB_WRITE_REGISTER32(base_address, MMU_LOAD_TLB);
+
+	MMUMMU_LOCK_WRITE_REGISTER32(base_address, lock_reg);
+
+	return status;
+}
+
+hw_status hw_mmu_pte_set(const u32 pg_tbl_va,
+			 u32 physical_addr,
+			 u32 virtual_addr,
+			 u32 page_sz, struct hw_mmu_map_attrs_t *map_attrs)
+{
+	hw_status status = 0;
+	u32 pte_addr, pte_val;
+	s32 num_entries = 1;
+
+	switch (page_sz) {
+	case HW_PAGE_SIZE4KB:
+		pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SMALL_PAGE_MASK);
+		pte_val =
+		    ((physical_addr & MMU_SMALL_PAGE_MASK) |
+		     (map_attrs->endianism << 9) | (map_attrs->
+						    element_size << 4) |
+		     (map_attrs->mixed_size << 11) | 2);
+		break;
+
+	case HW_PAGE_SIZE64KB:
+		num_entries = 16;
+		pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
+					      virtual_addr &
+					      MMU_LARGE_PAGE_MASK);
+		pte_val =
+		    ((physical_addr & MMU_LARGE_PAGE_MASK) |
+		     (map_attrs->endianism << 9) | (map_attrs->
+						    element_size << 4) |
+		     (map_attrs->mixed_size << 11) | 1);
+		break;
+
+	case HW_PAGE_SIZE1MB:
+		pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SECTION_ADDR_MASK);
+		pte_val =
+		    ((((physical_addr & MMU_SECTION_ADDR_MASK) |
+		       (map_attrs->endianism << 15) | (map_attrs->
+						       element_size << 10) |
+		       (map_attrs->mixed_size << 17)) & ~0x40000) | 0x2);
+		break;
+
+	case HW_PAGE_SIZE16MB:
+		num_entries = 16;
+		pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SSECTION_ADDR_MASK);
+		pte_val =
+		    (((physical_addr & MMU_SSECTION_ADDR_MASK) |
+		      (map_attrs->endianism << 15) | (map_attrs->
+						      element_size << 10) |
+		      (map_attrs->mixed_size << 17)
+		     ) | 0x40000 | 0x2);
+		break;
+
+	case HW_MMU_COARSE_PAGE_SIZE:
+		pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SECTION_ADDR_MASK);
+		pte_val = (physical_addr & MMU_PAGE_TABLE_MASK) | 1;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	while (--num_entries >= 0)
+		((u32 *) pte_addr)[num_entries] = pte_val;
+
+	return status;
+}
+
+hw_status hw_mmu_pte_clear(const u32 pg_tbl_va, u32 virtual_addr, u32 page_size)
+{
+	hw_status status = 0;
+	u32 pte_addr;
+	s32 num_entries = 1;
+
+	switch (page_size) {
+	case HW_PAGE_SIZE4KB:
+		pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SMALL_PAGE_MASK);
+		break;
+
+	case HW_PAGE_SIZE64KB:
+		num_entries = 16;
+		pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
+					      virtual_addr &
+					      MMU_LARGE_PAGE_MASK);
+		break;
+
+	case HW_PAGE_SIZE1MB:
+	case HW_MMU_COARSE_PAGE_SIZE:
+		pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SECTION_ADDR_MASK);
+		break;
+
+	case HW_PAGE_SIZE16MB:
+		num_entries = 16;
+		pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SSECTION_ADDR_MASK);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	while (--num_entries >= 0)
+		((u32 *) pte_addr)[num_entries] = 0;
+
+	return status;
+}
+
+/* mmu_flush_entry */
+static hw_status mmu_flush_entry(const void __iomem *base_address)
+{
+	hw_status status = 0;
+	u32 flush_entry_data = 0x1;
+
+	/* write values to register */
+	MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32(base_address, flush_entry_data);
+
+	return status;
+}
+
+/* mmu_set_cam_entry */
+static hw_status mmu_set_cam_entry(const void __iomem *base_address,
+				   const u32 page_sz,
+				   const u32 preserved_bit,
+				   const u32 valid_bit,
+				   const u32 virtual_addr_tag)
+{
+	hw_status status = 0;
+	u32 mmu_cam_reg;
+
+	mmu_cam_reg = (virtual_addr_tag << 12);
+	mmu_cam_reg = (mmu_cam_reg) | (page_sz) | (valid_bit << 2) |
+	    (preserved_bit << 3);
+
+	/* write values to register */
+	MMUMMU_CAM_WRITE_REGISTER32(base_address, mmu_cam_reg);
+
+	return status;
+}
+
+/* mmu_set_ram_entry */
+static hw_status mmu_set_ram_entry(const void __iomem *base_address,
+				   const u32 physical_addr,
+				   enum hw_endianism_t endianism,
+				   enum hw_element_size_t element_size,
+				   enum hw_mmu_mixed_size_t mixed_size)
+{
+	hw_status status = 0;
+	u32 mmu_ram_reg;
+
+	mmu_ram_reg = (physical_addr & MMU_ADDR_MASK);
+	mmu_ram_reg = (mmu_ram_reg) | ((endianism << 9) | (element_size << 7) |
+				       (mixed_size << 6));
+
+	/* write values to register */
+	MMUMMU_RAM_WRITE_REGISTER32(base_address, mmu_ram_reg);
+
+	return status;
+
+}
+
+void hw_mmu_tlb_flush_all(const void __iomem *base)
+{
+	__raw_writeb(1, base + MMU_GFLUSH);
+}
diff --git a/drivers/staging/tidspbridge/hw/hw_mmu.h b/drivers/staging/tidspbridge/hw/hw_mmu.h
new file mode 100644
index 000000000000..1458a2c6027b
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/hw_mmu.h
@@ -0,0 +1,163 @@
+/*
+ * hw_mmu.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * MMU types and API declarations
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _HW_MMU_H
+#define _HW_MMU_H
+
+#include <linux/types.h>
+
+/* Bitmasks for interrupt sources */
+#define HW_MMU_TRANSLATION_FAULT   0x2
+#define HW_MMU_ALL_INTERRUPTS      0x1F
+
+#define HW_MMU_COARSE_PAGE_SIZE 0x400
+
+/* hw_mmu_mixed_size_t:  Enumerated Type used to specify whether to follow
+			CPU/TLB Element size */
+enum hw_mmu_mixed_size_t {
+	HW_MMU_TLBES,
+	HW_MMU_CPUES
+};
+
+/* hw_mmu_map_attrs_t:  Struct containing MMU mapping attributes */
+struct hw_mmu_map_attrs_t {
+	enum hw_endianism_t endianism;
+	enum hw_element_size_t element_size;
+	enum hw_mmu_mixed_size_t mixed_size;
+	bool donotlockmpupage;
+};
+
+extern hw_status hw_mmu_enable(const void __iomem *base_address);
+
+extern hw_status hw_mmu_disable(const void __iomem *base_address);
+
+extern hw_status hw_mmu_num_locked_set(const void __iomem *base_address,
+				       u32 num_locked_entries);
+
+extern hw_status hw_mmu_victim_num_set(const void __iomem *base_address,
+				       u32 victim_entry_num);
+
+/* For MMU faults */
+extern hw_status hw_mmu_event_ack(const void __iomem *base_address,
+				  u32 irq_mask);
+
+extern hw_status hw_mmu_event_disable(const void __iomem *base_address,
+				      u32 irq_mask);
+
+extern hw_status hw_mmu_event_enable(const void __iomem *base_address,
+				     u32 irq_mask);
+
+extern hw_status hw_mmu_event_status(const void __iomem *base_address,
+				     u32 *irq_mask);
+
+extern hw_status hw_mmu_fault_addr_read(const void __iomem *base_address,
+					u32 *addr);
+
+/* Set the TT base address */
+extern hw_status hw_mmu_ttb_set(const void __iomem *base_address,
+				u32 ttb_phys_addr);
+
+extern hw_status hw_mmu_twl_enable(const void __iomem *base_address);
+
+extern hw_status hw_mmu_twl_disable(const void __iomem *base_address);
+
+extern hw_status hw_mmu_tlb_flush(const void __iomem *base_address,
+				  u32 virtual_addr, u32 page_sz);
+
+extern hw_status hw_mmu_tlb_add(const void __iomem *base_address,
+				u32 physical_addr,
+				u32 virtual_addr,
+				u32 page_sz,
+				u32 entry_num,
+				struct hw_mmu_map_attrs_t *map_attrs,
+				s8 preserved_bit, s8 valid_bit);
+
+/* For PTEs */
+extern hw_status hw_mmu_pte_set(const u32 pg_tbl_va,
+				u32 physical_addr,
+				u32 virtual_addr,
+				u32 page_sz,
+				struct hw_mmu_map_attrs_t *map_attrs);
+
+extern hw_status hw_mmu_pte_clear(const u32 pg_tbl_va,
+				  u32 virtual_addr, u32 page_size);
+
+void hw_mmu_tlb_flush_all(const void __iomem *base);
+
+static inline u32 hw_mmu_pte_addr_l1(u32 l1_base, u32 va)
+{
+	u32 pte_addr;
+	u32 va31_to20;
+
+	va31_to20 = va >> (20 - 2);	/* Left-shift by 2 here itself */
+	va31_to20 &= 0xFFFFFFFCUL;
+	pte_addr = l1_base + va31_to20;
+
+	return pte_addr;
+}
+
+static inline u32 hw_mmu_pte_addr_l2(u32 l2_base, u32 va)
+{
+	u32 pte_addr;
+
+	pte_addr = (l2_base & 0xFFFFFC00) | ((va >> 10) & 0x3FC);
+
+	return pte_addr;
+}
+
+static inline u32 hw_mmu_pte_coarse_l1(u32 pte_val)
+{
+	u32 pte_coarse;
+
+	pte_coarse = pte_val & 0xFFFFFC00;
+
+	return pte_coarse;
+}
+
+static inline u32 hw_mmu_pte_size_l1(u32 pte_val)
+{
+	u32 pte_size = 0;
+
+	if ((pte_val & 0x3) == 0x1) {
+		/* Points to L2 PT */
+		pte_size = HW_MMU_COARSE_PAGE_SIZE;
+	}
+
+	if ((pte_val & 0x3) == 0x2) {
+		if (pte_val & (1 << 18))
+			pte_size = HW_PAGE_SIZE16MB;
+		else
+			pte_size = HW_PAGE_SIZE1MB;
+	}
+
+	return pte_size;
+}
+
+static inline u32 hw_mmu_pte_size_l2(u32 pte_val)
+{
+	u32 pte_size = 0;
+
+	if (pte_val & 0x2)
+		pte_size = HW_PAGE_SIZE4KB;
+	else if (pte_val & 0x1)
+		pte_size = HW_PAGE_SIZE64KB;
+
+	return pte_size;
+}
+
+#endif /* _HW_MMU_H */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dspioctl.h b/drivers/staging/tidspbridge/include/dspbridge/dspioctl.h
index bad180108ada..41e0594dff34 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/dspioctl.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/dspioctl.h
@@ -19,6 +19,10 @@
 #ifndef DSPIOCTL_
 #define DSPIOCTL_
 
+/* ------------------------------------ Hardware Abstraction Layer */
+#include <hw_defs.h>
+#include <hw_mmu.h>
+
 /*
  * Any IOCTLS at or above this value are reserved for standard Bridge driver
  * interfaces.
@@ -61,6 +65,9 @@ struct bridge_ioctl_extproc {
 	/* GPP virtual address. __va does not work for ioremapped addresses */
 	u32 ul_gpp_va;
 	u32 ul_size;		/* Size of the mapped memory in bytes */
+	enum hw_endianism_t endianism;
+	enum hw_mmu_mixed_size_t mixed_mode;
+	enum hw_element_size_t elem_size;
 };
 
 #endif /* DSPIOCTL_ */

From 6c4c899ee27963357a7df1f5e15a5677978cd842 Mon Sep 17 00:00:00 2001
From: Felipe Contreras <felipe.contreras@gmail.com>
Date: Wed, 10 Nov 2010 12:11:49 -0600
Subject: [PATCH 0444/1066] Revert "staging: tidspbridge - fix mmufault
 support"

This reverts commit f265846db1e755c11498f6f7c011127dfcc5634a.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
---
 drivers/staging/tidspbridge/core/_deh.h       |  2 -
 drivers/staging/tidspbridge/core/tiomap3430.c |  2 -
 drivers/staging/tidspbridge/core/ue_deh.c     | 91 ++++++++++++-------
 3 files changed, 56 insertions(+), 39 deletions(-)

diff --git a/drivers/staging/tidspbridge/core/_deh.h b/drivers/staging/tidspbridge/core/_deh.h
index f1254f0aa037..16723cd34831 100644
--- a/drivers/staging/tidspbridge/core/_deh.h
+++ b/drivers/staging/tidspbridge/core/_deh.h
@@ -32,6 +32,4 @@ struct deh_mgr {
 	struct tasklet_struct dpc_tasklet;
 };
 
-int mmu_fault_isr(struct iommu *mmu);
-
 #endif /* _DEH_ */
diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c
index b68050a969a6..d643c2ba9dc1 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430.c
@@ -57,7 +57,6 @@
 #include "_tiomap.h"
 #include "_tiomap_pwr.h"
 #include "tiomap_io.h"
-#include "_deh.h"
 
 /* Offset in shared mem to write to in order to synchronize start with DSP */
 #define SHMSYNCOFFSET 4		/* GPP byte offset */
@@ -380,7 +379,6 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 	}
 	if (!status) {
 		dev_context->dsp_mmu = mmu;
-		mmu->isr = mmu_fault_isr;
 		sm_sg = &dev_context->sh_s;
 		sg0_da = iommu_kmap(mmu, sm_sg->seg0_da, sm_sg->seg0_pa,
 			sm_sg->seg0_size, IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
diff --git a/drivers/staging/tidspbridge/core/ue_deh.c b/drivers/staging/tidspbridge/core/ue_deh.c
index 2e1ac89644d3..14f319134357 100644
--- a/drivers/staging/tidspbridge/core/ue_deh.c
+++ b/drivers/staging/tidspbridge/core/ue_deh.c
@@ -31,7 +31,7 @@
 #include <dspbridge/drv.h>
 #include <dspbridge/wdt.h>
 
-#define MMU_CNTL_TWL_EN		(1 << 2)
+static u32 fault_addr;
 
 static void mmu_fault_dpc(unsigned long data)
 {
@@ -43,18 +43,43 @@ static void mmu_fault_dpc(unsigned long data)
 	bridge_deh_notify(deh, DSP_MMUFAULT, 0);
 }
 
-int mmu_fault_isr(struct iommu *mmu)
+static irqreturn_t mmu_fault_isr(int irq, void *data)
 {
-	struct deh_mgr *dm;
+	struct deh_mgr *deh = data;
+	struct cfg_hostres *resources;
+	u32 event;
 
-	dev_get_deh_mgr(dev_get_first(), &dm);
+	if (!deh)
+		return IRQ_HANDLED;
 
-	if (!dm)
-		return -EPERM;
+	resources = deh->hbridge_context->resources;
+	if (!resources) {
+		dev_dbg(bridge, "%s: Failed to get Host Resources\n",
+				__func__);
+		return IRQ_HANDLED;
+	}
 
-	iommu_write_reg(mmu, 0, MMU_IRQENABLE);
-	tasklet_schedule(&dm->dpc_tasklet);
-	return 0;
+	hw_mmu_event_status(resources->dw_dmmu_base, &event);
+	if (event == HW_MMU_TRANSLATION_FAULT) {
+		hw_mmu_fault_addr_read(resources->dw_dmmu_base, &fault_addr);
+		dev_dbg(bridge, "%s: event=0x%x, fault_addr=0x%x\n", __func__,
+				event, fault_addr);
+		/*
+		 * Schedule a DPC directly. In the future, it may be
+		 * necessary to check if DSP MMU fault is intended for
+		 * Bridge.
+		 */
+		tasklet_schedule(&deh->dpc_tasklet);
+
+		/* Disable the MMU events, else once we clear it will
+		 * start to raise INTs again */
+		hw_mmu_event_disable(resources->dw_dmmu_base,
+				HW_MMU_TRANSLATION_FAULT);
+	} else {
+		hw_mmu_event_disable(resources->dw_dmmu_base,
+				HW_MMU_ALL_INTERRUPTS);
+	}
+	return IRQ_HANDLED;
 }
 
 int bridge_deh_create(struct deh_mgr **ret_deh,
@@ -136,45 +161,42 @@ int bridge_deh_register_notify(struct deh_mgr *deh, u32 event_mask,
 #ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
 static void mmu_fault_print_stack(struct bridge_dev_context *dev_context)
 {
-	void *dummy_addr;
-	u32 fa, tmp;
-	struct iotlb_entry e;
-	struct iommu *mmu = dev_context->dsp_mmu;
-	dummy_addr = (void *)__get_free_page(GFP_ATOMIC);
+	struct cfg_hostres *resources;
+	struct hw_mmu_map_attrs_t map_attrs = {
+		.endianism = HW_LITTLE_ENDIAN,
+		.element_size = HW_ELEM_SIZE16BIT,
+		.mixed_size = HW_MMU_CPUES,
+	};
+	void *dummy_va_addr;
+
+	resources = dev_context->resources;
+	dummy_va_addr = (void*)__get_free_page(GFP_ATOMIC);
 
 	/*
 	 * Before acking the MMU fault, let's make sure MMU can only
 	 * access entry #0. Then add a new entry so that the DSP OS
 	 * can continue in order to dump the stack.
 	 */
-	tmp = iommu_read_reg(mmu, MMU_CNTL);
-	tmp &= ~MMU_CNTL_TWL_EN;
-	iommu_write_reg(mmu, tmp, MMU_CNTL);
-	fa = iommu_read_reg(mmu, MMU_FAULT_AD);
-	e.da = fa & PAGE_MASK;
-	e.pa = virt_to_phys(dummy_addr);
-	e.valid = 1;
-	e.prsvd = 1;
-	e.pgsz = IOVMF_PGSZ_4K & MMU_CAM_PGSZ_MASK;
-	e.endian = MMU_RAM_ENDIAN_LITTLE;
-	e.elsz = MMU_RAM_ELSZ_32;
-	e.mixed = 0;
+	hw_mmu_twl_disable(resources->dw_dmmu_base);
+	hw_mmu_tlb_flush_all(resources->dw_dmmu_base);
 
-	load_iotlb_entry(dev_context->dsp_mmu, &e);
+	hw_mmu_tlb_add(resources->dw_dmmu_base,
+			virt_to_phys(dummy_va_addr), fault_addr,
+			HW_PAGE_SIZE4KB, 1,
+			&map_attrs, HW_SET, HW_SET);
 
 	dsp_clk_enable(DSP_CLK_GPT8);
 
 	dsp_gpt_wait_overflow(DSP_CLK_GPT8, 0xfffffffe);
 
 	/* Clear MMU interrupt */
-	tmp = iommu_read_reg(mmu, MMU_IRQSTATUS);
-	iommu_write_reg(mmu, tmp, MMU_IRQSTATUS);
-
+	hw_mmu_event_ack(resources->dw_dmmu_base,
+			HW_MMU_TRANSLATION_FAULT);
 	dump_dsp_stack(dev_context);
 	dsp_clk_disable(DSP_CLK_GPT8);
 
-	iopgtable_clear_entry(mmu, fa);
-	free_page((unsigned long)dummy_addr);
+	hw_mmu_disable(resources->dw_dmmu_base);
+	free_page((unsigned long)dummy_va_addr);
 }
 #endif
 
@@ -193,7 +215,6 @@ void bridge_deh_notify(struct deh_mgr *deh, int event, int info)
 {
 	struct bridge_dev_context *dev_context;
 	const char *str = event_to_string(event);
-	u32 fa;
 
 	if (!deh)
 		return;
@@ -211,8 +232,8 @@ void bridge_deh_notify(struct deh_mgr *deh, int event, int info)
 #endif
 		break;
 	case DSP_MMUFAULT:
-		fa = iommu_read_reg(dev_context->dsp_mmu, MMU_FAULT_AD);
-		dev_err(bridge, "%s: %s, addr=0x%x", __func__, str, fa);
+		dev_err(bridge, "%s: %s, addr=0x%x", __func__,
+				str, fault_addr);
 #ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
 		print_dsp_trace_buffer(dev_context);
 		dump_dl_modules(dev_context);

From ac8a139a14db73f96f7b79765c3a9e34d16bdb95 Mon Sep 17 00:00:00 2001
From: Felipe Contreras <felipe.contreras@gmail.com>
Date: Wed, 10 Nov 2010 12:11:59 -0600
Subject: [PATCH 0445/1066] Revert "staging: tidspbridge - remove custom mmu
 code from tiomap3430.c"

This reverts commit e7396e77d9e4230bf725b5807732cbca191d111f.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
---
 drivers/staging/tidspbridge/core/_tiomap.h    |   2 +
 drivers/staging/tidspbridge/core/tiomap3430.c | 425 ++++++++++++++++++
 2 files changed, 427 insertions(+)

diff --git a/drivers/staging/tidspbridge/core/_tiomap.h b/drivers/staging/tidspbridge/core/_tiomap.h
index 394a64a7ba21..877749258acb 100644
--- a/drivers/staging/tidspbridge/core/_tiomap.h
+++ b/drivers/staging/tidspbridge/core/_tiomap.h
@@ -330,6 +330,7 @@ struct bridge_dev_context {
 	 */
 	u32 dw_dsp_ext_base_addr;	/* See the comment above */
 	u32 dw_api_reg_base;	/* API mem map'd registers */
+	void __iomem *dw_dsp_mmu_base;	/* DSP MMU Mapped registers */
 	u32 dw_api_clk_base;	/* CLK Registers */
 	u32 dw_dsp_clk_m2_base;	/* DSP Clock Module m2 */
 	u32 dw_public_rhea;	/* Pub Rhea */
@@ -355,6 +356,7 @@ struct bridge_dev_context {
 
 	/* TC Settings */
 	bool tc_word_swap_on;	/* Traffic Controller Word Swap */
+	struct pg_table_attrs *pt_attrs;
 	u32 dsp_per_clks;
 };
 
diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c
index d643c2ba9dc1..a342feed42f6 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430.c
@@ -116,8 +116,56 @@ static int bridge_dev_create(struct bridge_dev_context
 static int bridge_dev_ctrl(struct bridge_dev_context *dev_context,
 				  u32 dw_cmd, void *pargs);
 static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt);
+static int pte_update(struct bridge_dev_context *dev_ctxt, u32 pa,
+			     u32 va, u32 size,
+			     struct hw_mmu_map_attrs_t *map_attrs);
+static int pte_set(struct pg_table_attrs *pt, u32 pa, u32 va,
+			  u32 size, struct hw_mmu_map_attrs_t *attrs);
+static int mem_map_vmalloc(struct bridge_dev_context *dev_context,
+				  u32 ul_mpu_addr, u32 virt_addr,
+				  u32 ul_num_bytes,
+				  struct hw_mmu_map_attrs_t *hw_attrs);
+
 bool wait_for_start(struct bridge_dev_context *dev_context, u32 dw_sync_addr);
 
+/*  ----------------------------------- Globals */
+
+/* Attributes of L2 page tables for DSP MMU */
+struct page_info {
+	u32 num_entries;	/* Number of valid PTEs in the L2 PT */
+};
+
+/* Attributes used to manage the DSP MMU page tables */
+struct pg_table_attrs {
+	spinlock_t pg_lock;	/* Critical section object handle */
+
+	u32 l1_base_pa;		/* Physical address of the L1 PT */
+	u32 l1_base_va;		/* Virtual  address of the L1 PT */
+	u32 l1_size;		/* Size of the L1 PT */
+	u32 l1_tbl_alloc_pa;
+	/* Physical address of Allocated mem for L1 table. May not be aligned */
+	u32 l1_tbl_alloc_va;
+	/* Virtual address of Allocated mem for L1 table. May not be aligned */
+	u32 l1_tbl_alloc_sz;
+	/* Size of consistent memory allocated for L1 table.
+	 * May not be aligned */
+
+	u32 l2_base_pa;		/* Physical address of the L2 PT */
+	u32 l2_base_va;		/* Virtual  address of the L2 PT */
+	u32 l2_size;		/* Size of the L2 PT */
+	u32 l2_tbl_alloc_pa;
+	/* Physical address of Allocated mem for L2 table. May not be aligned */
+	u32 l2_tbl_alloc_va;
+	/* Virtual address of Allocated mem for L2 table. May not be aligned */
+	u32 l2_tbl_alloc_sz;
+	/* Size of consistent memory allocated for L2 table.
+	 * May not be aligned */
+
+	u32 l2_num_pages;	/* Number of allocated L2 PT */
+	/* Array [l2_num_pages] of L2 PT info structs */
+	struct page_info *pg_info;
+};
+
 /*
  *  This Bridge driver's function interface table.
  */
@@ -166,6 +214,27 @@ static struct bridge_drv_interface drv_interface_fxns = {
 	bridge_msg_set_queue_id,
 };
 
+static inline void flush_all(struct bridge_dev_context *dev_context)
+{
+	if (dev_context->dw_brd_state == BRD_DSP_HIBERNATION ||
+	    dev_context->dw_brd_state == BRD_HIBERNATION)
+		wake_dsp(dev_context, NULL);
+
+	hw_mmu_tlb_flush_all(dev_context->dw_dsp_mmu_base);
+}
+
+static void bad_page_dump(u32 pa, struct page *pg)
+{
+	pr_emerg("DSPBRIDGE: MAP function: COUNT 0 FOR PA 0x%x\n", pa);
+	pr_emerg("Bad page state in process '%s'\n"
+		 "page:%p flags:0x%0*lx mapping:%p mapcount:%d count:%d\n"
+		 "Backtrace:\n",
+		 current->comm, pg, (int)(2 * sizeof(unsigned long)),
+		 (unsigned long)pg->flags, pg->mapping,
+		 page_mapcount(pg), page_count(pg));
+	dump_stack();
+}
+
 /*
  *  ======== bridge_drv_entry ========
  *  purpose:
@@ -571,6 +640,7 @@ static int bridge_brd_stop(struct bridge_dev_context *dev_ctxt)
 {
 	int status = 0;
 	struct bridge_dev_context *dev_context = dev_ctxt;
+	struct pg_table_attrs *pt_attrs;
 	u32 dsp_pwr_state;
 	int i;
 	struct bridge_ioctl_extproc *tlb = dev_context->atlb_entry;
@@ -609,6 +679,14 @@ static int bridge_brd_stop(struct bridge_dev_context *dev_ctxt)
 
 	dsp_wdt_enable(false);
 
+	/* This is a good place to clear the MMU page tables as well */
+	if (dev_context->pt_attrs) {
+		pt_attrs = dev_context->pt_attrs;
+		memset((u8 *) pt_attrs->l1_base_va, 0x00, pt_attrs->l1_size);
+		memset((u8 *) pt_attrs->l2_base_va, 0x00, pt_attrs->l2_size);
+		memset((u8 *) pt_attrs->pg_info, 0x00,
+		       (pt_attrs->l2_num_pages * sizeof(struct page_info)));
+	}
 	/* Reset DSP */
 	(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK,
 		OMAP3430_RST1_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
@@ -699,6 +777,10 @@ static int bridge_dev_create(struct bridge_dev_context
 	struct bridge_dev_context *dev_context = NULL;
 	s32 entry_ndx;
 	struct cfg_hostres *resources = config_param;
+	struct pg_table_attrs *pt_attrs;
+	u32 pg_tbl_pa;
+	u32 pg_tbl_va;
+	u32 align_size;
 	struct drv_data *drv_datap = dev_get_drvdata(bridge);
 
 	/* Allocate and initialize a data structure to contain the bridge driver
@@ -729,8 +811,97 @@ static int bridge_dev_create(struct bridge_dev_context
 	if (!dev_context->dw_dsp_base_addr)
 		status = -EPERM;
 
+	pt_attrs = kzalloc(sizeof(struct pg_table_attrs), GFP_KERNEL);
+	if (pt_attrs != NULL) {
+		/* Assuming that we use only DSP's memory map
+		 * until 0x4000:0000 , we would need only 1024
+		 * L1 enties i.e L1 size = 4K */
+		pt_attrs->l1_size = 0x1000;
+		align_size = pt_attrs->l1_size;
+		/* Align sizes are expected to be power of 2 */
+		/* we like to get aligned on L1 table size */
+		pg_tbl_va = (u32) mem_alloc_phys_mem(pt_attrs->l1_size,
+						     align_size, &pg_tbl_pa);
+
+		/* Check if the PA is aligned for us */
+		if ((pg_tbl_pa) & (align_size - 1)) {
+			/* PA not aligned to page table size ,
+			 * try with more allocation and align */
+			mem_free_phys_mem((void *)pg_tbl_va, pg_tbl_pa,
+					  pt_attrs->l1_size);
+			/* we like to get aligned on L1 table size */
+			pg_tbl_va =
+			    (u32) mem_alloc_phys_mem((pt_attrs->l1_size) * 2,
+						     align_size, &pg_tbl_pa);
+			/* We should be able to get aligned table now */
+			pt_attrs->l1_tbl_alloc_pa = pg_tbl_pa;
+			pt_attrs->l1_tbl_alloc_va = pg_tbl_va;
+			pt_attrs->l1_tbl_alloc_sz = pt_attrs->l1_size * 2;
+			/* Align the PA to the next 'align'  boundary */
+			pt_attrs->l1_base_pa =
+			    ((pg_tbl_pa) +
+			     (align_size - 1)) & (~(align_size - 1));
+			pt_attrs->l1_base_va =
+			    pg_tbl_va + (pt_attrs->l1_base_pa - pg_tbl_pa);
+		} else {
+			/* We got aligned PA, cool */
+			pt_attrs->l1_tbl_alloc_pa = pg_tbl_pa;
+			pt_attrs->l1_tbl_alloc_va = pg_tbl_va;
+			pt_attrs->l1_tbl_alloc_sz = pt_attrs->l1_size;
+			pt_attrs->l1_base_pa = pg_tbl_pa;
+			pt_attrs->l1_base_va = pg_tbl_va;
+		}
+		if (pt_attrs->l1_base_va)
+			memset((u8 *) pt_attrs->l1_base_va, 0x00,
+			       pt_attrs->l1_size);
+
+		/* number of L2 page tables = DMM pool used + SHMMEM +EXTMEM +
+		 * L4 pages */
+		pt_attrs->l2_num_pages = ((DMMPOOLSIZE >> 20) + 6);
+		pt_attrs->l2_size = HW_MMU_COARSE_PAGE_SIZE *
+		    pt_attrs->l2_num_pages;
+		align_size = 4;	/* Make it u32 aligned */
+		/* we like to get aligned on L1 table size */
+		pg_tbl_va = (u32) mem_alloc_phys_mem(pt_attrs->l2_size,
+						     align_size, &pg_tbl_pa);
+		pt_attrs->l2_tbl_alloc_pa = pg_tbl_pa;
+		pt_attrs->l2_tbl_alloc_va = pg_tbl_va;
+		pt_attrs->l2_tbl_alloc_sz = pt_attrs->l2_size;
+		pt_attrs->l2_base_pa = pg_tbl_pa;
+		pt_attrs->l2_base_va = pg_tbl_va;
+
+		if (pt_attrs->l2_base_va)
+			memset((u8 *) pt_attrs->l2_base_va, 0x00,
+			       pt_attrs->l2_size);
+
+		pt_attrs->pg_info = kzalloc(pt_attrs->l2_num_pages *
+					sizeof(struct page_info), GFP_KERNEL);
+		dev_dbg(bridge,
+			"L1 pa %x, va %x, size %x\n L2 pa %x, va "
+			"%x, size %x\n", pt_attrs->l1_base_pa,
+			pt_attrs->l1_base_va, pt_attrs->l1_size,
+			pt_attrs->l2_base_pa, pt_attrs->l2_base_va,
+			pt_attrs->l2_size);
+		dev_dbg(bridge, "pt_attrs %p L2 NumPages %x pg_info %p\n",
+			pt_attrs, pt_attrs->l2_num_pages, pt_attrs->pg_info);
+	}
+	if ((pt_attrs != NULL) && (pt_attrs->l1_base_va != 0) &&
+	    (pt_attrs->l2_base_va != 0) && (pt_attrs->pg_info != NULL))
+		dev_context->pt_attrs = pt_attrs;
+	else
+		status = -ENOMEM;
+
 	if (!status) {
+		spin_lock_init(&pt_attrs->pg_lock);
 		dev_context->tc_word_swap_on = drv_datap->tc_wordswapon;
+
+		/* Set the Clock Divisor for the DSP module */
+		udelay(5);
+		/* MMU address is obtained from the host
+		 * resources struct */
+		dev_context->dw_dsp_mmu_base = resources->dw_dmmu_base;
+	}
+	if (!status) {
 		dev_context->hdev_obj = hdev_obj;
 		/* Store current board state. */
 		dev_context->dw_brd_state = BRD_UNKNOWN;
@@ -740,6 +911,23 @@ static int bridge_dev_create(struct bridge_dev_context
 		/* Return ptr to our device state to the DSP API for storage */
 		*dev_cntxt = dev_context;
 	} else {
+		if (pt_attrs != NULL) {
+			kfree(pt_attrs->pg_info);
+
+			if (pt_attrs->l2_tbl_alloc_va) {
+				mem_free_phys_mem((void *)
+						  pt_attrs->l2_tbl_alloc_va,
+						  pt_attrs->l2_tbl_alloc_pa,
+						  pt_attrs->l2_tbl_alloc_sz);
+			}
+			if (pt_attrs->l1_tbl_alloc_va) {
+				mem_free_phys_mem((void *)
+						  pt_attrs->l1_tbl_alloc_va,
+						  pt_attrs->l1_tbl_alloc_pa,
+						  pt_attrs->l1_tbl_alloc_sz);
+			}
+		}
+		kfree(pt_attrs);
 		kfree(dev_context);
 	}
 func_end:
@@ -807,6 +995,7 @@ static int bridge_dev_ctrl(struct bridge_dev_context *dev_context,
  */
 static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt)
 {
+	struct pg_table_attrs *pt_attrs;
 	int status = 0;
 	struct bridge_dev_context *dev_context = (struct bridge_dev_context *)
 	    dev_ctxt;
@@ -820,6 +1009,23 @@ static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt)
 
 	/* first put the device to stop state */
 	bridge_brd_stop(dev_context);
+	if (dev_context->pt_attrs) {
+		pt_attrs = dev_context->pt_attrs;
+		kfree(pt_attrs->pg_info);
+
+		if (pt_attrs->l2_tbl_alloc_va) {
+			mem_free_phys_mem((void *)pt_attrs->l2_tbl_alloc_va,
+					  pt_attrs->l2_tbl_alloc_pa,
+					  pt_attrs->l2_tbl_alloc_sz);
+		}
+		if (pt_attrs->l1_tbl_alloc_va) {
+			mem_free_phys_mem((void *)pt_attrs->l1_tbl_alloc_va,
+					  pt_attrs->l1_tbl_alloc_pa,
+					  pt_attrs->l1_tbl_alloc_sz);
+		}
+		kfree(pt_attrs);
+
+	}
 
 	if (dev_context->resources) {
 		host_res = dev_context->resources;
@@ -1115,6 +1321,225 @@ int user_to_dsp_unmap(struct iommu *mmu, u32 da)
 	return 0;
 }
 
+/*
+ *  ======== pte_update ========
+ *      This function calculates the optimum page-aligned addresses and sizes
+ *      Caller must pass page-aligned values
+ */
+static int pte_update(struct bridge_dev_context *dev_ctxt, u32 pa,
+			     u32 va, u32 size,
+			     struct hw_mmu_map_attrs_t *map_attrs)
+{
+	u32 i;
+	u32 all_bits;
+	u32 pa_curr = pa;
+	u32 va_curr = va;
+	u32 num_bytes = size;
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	int status = 0;
+	u32 page_size[] = { HW_PAGE_SIZE16MB, HW_PAGE_SIZE1MB,
+		HW_PAGE_SIZE64KB, HW_PAGE_SIZE4KB
+	};
+
+	while (num_bytes && !status) {
+		/* To find the max. page size with which both PA & VA are
+		 * aligned */
+		all_bits = pa_curr | va_curr;
+
+		for (i = 0; i < 4; i++) {
+			if ((num_bytes >= page_size[i]) && ((all_bits &
+							     (page_size[i] -
+							      1)) == 0)) {
+				status =
+				    pte_set(dev_context->pt_attrs, pa_curr,
+					    va_curr, page_size[i], map_attrs);
+				pa_curr += page_size[i];
+				va_curr += page_size[i];
+				num_bytes -= page_size[i];
+				/* Don't try smaller sizes. Hopefully we have
+				 * reached an address aligned to a bigger page
+				 * size */
+				break;
+			}
+		}
+	}
+
+	return status;
+}
+
+/*
+ *  ======== pte_set ========
+ *      This function calculates PTE address (MPU virtual) to be updated
+ *      It also manages the L2 page tables
+ */
+static int pte_set(struct pg_table_attrs *pt, u32 pa, u32 va,
+			  u32 size, struct hw_mmu_map_attrs_t *attrs)
+{
+	u32 i;
+	u32 pte_val;
+	u32 pte_addr_l1;
+	u32 pte_size;
+	/* Base address of the PT that will be updated */
+	u32 pg_tbl_va;
+	u32 l1_base_va;
+	/* Compiler warns that the next three variables might be used
+	 * uninitialized in this function. Doesn't seem so. Working around,
+	 * anyways. */
+	u32 l2_base_va = 0;
+	u32 l2_base_pa = 0;
+	u32 l2_page_num = 0;
+	int status = 0;
+
+	l1_base_va = pt->l1_base_va;
+	pg_tbl_va = l1_base_va;
+	if ((size == HW_PAGE_SIZE64KB) || (size == HW_PAGE_SIZE4KB)) {
+		/* Find whether the L1 PTE points to a valid L2 PT */
+		pte_addr_l1 = hw_mmu_pte_addr_l1(l1_base_va, va);
+		if (pte_addr_l1 <= (pt->l1_base_va + pt->l1_size)) {
+			pte_val = *(u32 *) pte_addr_l1;
+			pte_size = hw_mmu_pte_size_l1(pte_val);
+		} else {
+			return -EPERM;
+		}
+		spin_lock(&pt->pg_lock);
+		if (pte_size == HW_MMU_COARSE_PAGE_SIZE) {
+			/* Get the L2 PA from the L1 PTE, and find
+			 * corresponding L2 VA */
+			l2_base_pa = hw_mmu_pte_coarse_l1(pte_val);
+			l2_base_va =
+			    l2_base_pa - pt->l2_base_pa + pt->l2_base_va;
+			l2_page_num =
+			    (l2_base_pa -
+			     pt->l2_base_pa) / HW_MMU_COARSE_PAGE_SIZE;
+		} else if (pte_size == 0) {
+			/* L1 PTE is invalid. Allocate a L2 PT and
+			 * point the L1 PTE to it */
+			/* Find a free L2 PT. */
+			for (i = 0; (i < pt->l2_num_pages) &&
+			     (pt->pg_info[i].num_entries != 0); i++)
+				;;
+			if (i < pt->l2_num_pages) {
+				l2_page_num = i;
+				l2_base_pa = pt->l2_base_pa + (l2_page_num *
+						HW_MMU_COARSE_PAGE_SIZE);
+				l2_base_va = pt->l2_base_va + (l2_page_num *
+						HW_MMU_COARSE_PAGE_SIZE);
+				/* Endianness attributes are ignored for
+				 * HW_MMU_COARSE_PAGE_SIZE */
+				status =
+				    hw_mmu_pte_set(l1_base_va, l2_base_pa, va,
+						   HW_MMU_COARSE_PAGE_SIZE,
+						   attrs);
+			} else {
+				status = -ENOMEM;
+			}
+		} else {
+			/* Found valid L1 PTE of another size.
+			 * Should not overwrite it. */
+			status = -EPERM;
+		}
+		if (!status) {
+			pg_tbl_va = l2_base_va;
+			if (size == HW_PAGE_SIZE64KB)
+				pt->pg_info[l2_page_num].num_entries += 16;
+			else
+				pt->pg_info[l2_page_num].num_entries++;
+			dev_dbg(bridge, "PTE: L2 BaseVa %x, BasePa %x, PageNum "
+				"%x, num_entries %x\n", l2_base_va,
+				l2_base_pa, l2_page_num,
+				pt->pg_info[l2_page_num].num_entries);
+		}
+		spin_unlock(&pt->pg_lock);
+	}
+	if (!status) {
+		dev_dbg(bridge, "PTE: pg_tbl_va %x, pa %x, va %x, size %x\n",
+			pg_tbl_va, pa, va, size);
+		dev_dbg(bridge, "PTE: endianism %x, element_size %x, "
+			"mixed_size %x\n", attrs->endianism,
+			attrs->element_size, attrs->mixed_size);
+		status = hw_mmu_pte_set(pg_tbl_va, pa, va, size, attrs);
+	}
+
+	return status;
+}
+
+/* Memory map kernel VA -- memory allocated with vmalloc */
+static int mem_map_vmalloc(struct bridge_dev_context *dev_context,
+				  u32 ul_mpu_addr, u32 virt_addr,
+				  u32 ul_num_bytes,
+				  struct hw_mmu_map_attrs_t *hw_attrs)
+{
+	int status = 0;
+	struct page *page[1];
+	u32 i;
+	u32 pa_curr;
+	u32 pa_next;
+	u32 va_curr;
+	u32 size_curr;
+	u32 num_pages;
+	u32 pa;
+	u32 num_of4k_pages;
+	u32 temp = 0;
+
+	/*
+	 * Do Kernel va to pa translation.
+	 * Combine physically contiguous regions to reduce TLBs.
+	 * Pass the translated pa to pte_update.
+	 */
+	num_pages = ul_num_bytes / PAGE_SIZE;	/* PAGE_SIZE = OS page size */
+	i = 0;
+	va_curr = ul_mpu_addr;
+	page[0] = vmalloc_to_page((void *)va_curr);
+	pa_next = page_to_phys(page[0]);
+	while (!status && (i < num_pages)) {
+		/*
+		 * Reuse pa_next from the previous iteraion to avoid
+		 * an extra va2pa call
+		 */
+		pa_curr = pa_next;
+		size_curr = PAGE_SIZE;
+		/*
+		 * If the next page is physically contiguous,
+		 * map it with the current one by increasing
+		 * the size of the region to be mapped
+		 */
+		while (++i < num_pages) {
+			page[0] =
+			    vmalloc_to_page((void *)(va_curr + size_curr));
+			pa_next = page_to_phys(page[0]);
+
+			if (pa_next == (pa_curr + size_curr))
+				size_curr += PAGE_SIZE;
+			else
+				break;
+
+		}
+		if (pa_next == 0) {
+			status = -ENOMEM;
+			break;
+		}
+		pa = pa_curr;
+		num_of4k_pages = size_curr / HW_PAGE_SIZE4KB;
+		while (temp++ < num_of4k_pages) {
+			get_page(PHYS_TO_PAGE(pa));
+			pa += HW_PAGE_SIZE4KB;
+		}
+		status = pte_update(dev_context, pa_curr, virt_addr +
+				    (va_curr - ul_mpu_addr), size_curr,
+				    hw_attrs);
+		va_curr += size_curr;
+	}
+	/*
+	 * In any case, flush the TLB
+	 * This is called from here instead from pte_update to avoid unnecessary
+	 * repetition while mapping non-contiguous physical regions of a virtual
+	 * region
+	 */
+	flush_all(dev_context);
+	dev_dbg(bridge, "%s status %x\n", __func__, status);
+	return status;
+}
+
 /*
  *  ======== wait_for_start ========
  *      Wait for the singal from DSP that it has started, or time out.

From d0b345f3ee03a7e8823dd3f8dfbb48aaeeac7c89 Mon Sep 17 00:00:00 2001
From: Felipe Contreras <felipe.contreras@gmail.com>
Date: Wed, 10 Nov 2010 12:12:11 -0600
Subject: [PATCH 0446/1066] Revert "staging: tidspbridge - rename
 bridge_brd_mem_map/unmap to a proper name"

This reverts commit 4dd1944ab7242d76534c97d5fef0ce541a2f1040.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
---
 drivers/staging/tidspbridge/core/_tiomap.h    |  24 ---
 drivers/staging/tidspbridge/core/tiomap3430.c | 153 +++++++++---------
 .../tidspbridge/include/dspbridge/dspdefs.h   |  44 +++++
 drivers/staging/tidspbridge/pmgr/dev.c        |   2 +
 drivers/staging/tidspbridge/rmgr/proc.c       |  34 ++--
 5 files changed, 141 insertions(+), 116 deletions(-)

diff --git a/drivers/staging/tidspbridge/core/_tiomap.h b/drivers/staging/tidspbridge/core/_tiomap.h
index 877749258acb..c1bf95d756b3 100644
--- a/drivers/staging/tidspbridge/core/_tiomap.h
+++ b/drivers/staging/tidspbridge/core/_tiomap.h
@@ -383,28 +383,4 @@ extern s32 dsp_debug;
  */
 int sm_interrupt_dsp(struct bridge_dev_context *dev_context, u16 mb_val);
 
-/**
- * user_to_dsp_map() - maps user to dsp virtual address
- * @mmu:	Pointer to iommu handle.
- * @uva:		Virtual user space address.
- * @da		DSP address
- * @size		Buffer size to map.
- * @usr_pgs	struct page array pointer where the user pages will be stored
- *
- * This function maps a user space buffer into DSP virtual address.
- *
- */
-u32 user_to_dsp_map(struct iommu *mmu, u32 uva, u32 da, u32 size,
-						struct page **usr_pgs);
-
-/**
- * user_to_dsp_unmap() - unmaps DSP virtual buffer.
- * @mmu:	Pointer to iommu handle.
- * @da		DSP address
- *
- * This function unmaps a user space buffer into DSP virtual address.
- *
- */
-int user_to_dsp_unmap(struct iommu *mmu, u32 da);
-
 #endif /* _TIOMAP_ */
diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c
index a342feed42f6..7ab272ca643d 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430.c
@@ -109,6 +109,12 @@ static int bridge_brd_mem_copy(struct bridge_dev_context *dev_ctxt,
 static int bridge_brd_mem_write(struct bridge_dev_context *dev_ctxt,
 				    u8 *host_buff, u32 dsp_addr,
 				    u32 ul_num_bytes, u32 mem_type);
+static int bridge_brd_mem_map(struct bridge_dev_context *dev_ctxt,
+				  u32 ul_mpu_addr, u32 virt_addr,
+				  u32 ul_num_bytes, u32 ul_map_attr,
+				  struct page **mapped_pages);
+static int bridge_brd_mem_un_map(struct bridge_dev_context *dev_ctxt,
+				     u32 da);
 static int bridge_dev_create(struct bridge_dev_context
 					**dev_cntxt,
 					struct dev_object *hdev_obj,
@@ -116,6 +122,9 @@ static int bridge_dev_create(struct bridge_dev_context
 static int bridge_dev_ctrl(struct bridge_dev_context *dev_context,
 				  u32 dw_cmd, void *pargs);
 static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt);
+static int get_io_pages(struct mm_struct *mm, u32 uva, unsigned pages,
+						struct page **usr_pgs);
+static u32 user_va2_pa(struct mm_struct *mm, u32 address);
 static int pte_update(struct bridge_dev_context *dev_ctxt, u32 pa,
 			     u32 va, u32 size,
 			     struct hw_mmu_map_attrs_t *map_attrs);
@@ -185,6 +194,8 @@ static struct bridge_drv_interface drv_interface_fxns = {
 	bridge_brd_set_state,
 	bridge_brd_mem_copy,
 	bridge_brd_mem_write,
+	bridge_brd_mem_map,
+	bridge_brd_mem_un_map,
 	/* The following CHNL functions are provided by chnl_io.lib: */
 	bridge_chnl_create,
 	bridge_chnl_destroy,
@@ -1155,77 +1166,22 @@ static int bridge_brd_mem_write(struct bridge_dev_context *dev_ctxt,
 }
 
 /*
- *  ======== user_va2_pa ========
- *  Purpose:
- *      This function walks through the page tables to convert a userland
- *      virtual address to physical address
- */
-static u32 user_va2_pa(struct mm_struct *mm, u32 address)
-{
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *ptep, pte;
-
-	pgd = pgd_offset(mm, address);
-	if (!(pgd_none(*pgd) || pgd_bad(*pgd))) {
-		pmd = pmd_offset(pgd, address);
-		if (!(pmd_none(*pmd) || pmd_bad(*pmd))) {
-			ptep = pte_offset_map(pmd, address);
-			if (ptep) {
-				pte = *ptep;
-				if (pte_present(pte))
-					return pte & PAGE_MASK;
-			}
-		}
-	}
-
-	return 0;
-}
-
-/**
- * get_io_pages() - pin and get pages of io user's buffer.
- * @mm:		mm_struct Pointer of the process.
- * @uva:		Virtual user space address.
- * @pages	Pages to be pined.
- * @usr_pgs	struct page array pointer where the user pages will be stored
+ *  ======== bridge_brd_mem_map ========
+ *      This function maps MPU buffer to the DSP address space. It performs
+ *  linear to physical address translation if required. It translates each
+ *  page since linear addresses can be physically non-contiguous
+ *  All address & size arguments are assumed to be page aligned (in proc.c)
  *
+ *  TODO: Disable MMU while updating the page tables (but that'll stall DSP)
  */
-static int get_io_pages(struct mm_struct *mm, u32 uva, unsigned pages,
-						struct page **usr_pgs)
-{
-	u32 pa;
-	int i;
-	struct page *pg;
+static int bridge_brd_mem_map(struct bridge_dev_context *dev_ctx,
+			u32 uva, u32 da, u32 size, u32 attr,
+			struct page **usr_pgs)
 
-	for (i = 0; i < pages; i++) {
-		pa = user_va2_pa(mm, uva);
-
-		if (!pfn_valid(__phys_to_pfn(pa)))
-			break;
-
-		pg = PHYS_TO_PAGE(pa);
-		usr_pgs[i] = pg;
-		get_page(pg);
-	}
-	return i;
-}
-
-/**
- * user_to_dsp_map() - maps user to dsp virtual address
- * @mmu:	Pointer to iommu handle.
- * @uva:		Virtual user space address.
- * @da		DSP address
- * @size		Buffer size to map.
- * @usr_pgs	struct page array pointer where the user pages will be stored
- *
- * This function maps a user space buffer into DSP virtual address.
- *
- */
-u32 user_to_dsp_map(struct iommu *mmu, u32 uva, u32 da, u32 size,
-				struct page **usr_pgs)
 {
 	int res, w;
 	unsigned pages, i;
+	struct iommu *mmu = dev_ctx->dsp_mmu;
 	struct vm_area_struct *vma;
 	struct mm_struct *mm = current->mm;
 	struct sg_table *sgt;
@@ -1282,7 +1238,7 @@ u32 user_to_dsp_map(struct iommu *mmu, u32 uva, u32 da, u32 size,
 	da = iommu_vmap(mmu, da, sgt, IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
 
 	if (!IS_ERR_VALUE(da))
-		return da;
+		return 0;
 	res = (int)da;
 
 	sg_free_table(sgt);
@@ -1295,21 +1251,21 @@ err_pages:
 	return res;
 }
 
-/**
- * user_to_dsp_unmap() - unmaps DSP virtual buffer.
- * @mmu:	Pointer to iommu handle.
- * @da		DSP address
- *
- * This function unmaps a user space buffer into DSP virtual address.
+/*
+ *  ======== bridge_brd_mem_un_map ========
+ *      Invalidate the PTEs for the DSP VA block to be unmapped.
  *
+ *      PTEs of a mapped memory block are contiguous in any page table
+ *      So, instead of looking up the PTE address for every 4K block,
+ *      we clear consecutive PTEs until we unmap all the bytes
  */
-int user_to_dsp_unmap(struct iommu *mmu, u32 da)
+static int bridge_brd_mem_un_map(struct bridge_dev_context *dev_ctx, u32 da)
 {
 	unsigned i;
 	struct sg_table *sgt;
 	struct scatterlist *sg;
 
-	sgt = iommu_vunmap(mmu, da);
+	sgt = iommu_vunmap(dev_ctx->dsp_mmu, da);
 	if (!sgt)
 		return -EFAULT;
 
@@ -1321,6 +1277,55 @@ int user_to_dsp_unmap(struct iommu *mmu, u32 da)
 	return 0;
 }
 
+
+static int get_io_pages(struct mm_struct *mm, u32 uva, unsigned pages,
+						struct page **usr_pgs)
+{
+	u32 pa;
+	int i;
+	struct page *pg;
+
+	for (i = 0; i < pages; i++) {
+		pa = user_va2_pa(mm, uva);
+
+		if (!pfn_valid(__phys_to_pfn(pa)))
+			break;
+
+		pg = PHYS_TO_PAGE(pa);
+		usr_pgs[i] = pg;
+		get_page(pg);
+	}
+	return i;
+}
+
+/*
+ *  ======== user_va2_pa ========
+ *  Purpose:
+ *      This function walks through the page tables to convert a userland
+ *      virtual address to physical address
+ */
+static u32 user_va2_pa(struct mm_struct *mm, u32 address)
+{
+	pgd_t *pgd;
+	pmd_t *pmd;
+	pte_t *ptep, pte;
+
+	pgd = pgd_offset(mm, address);
+	if (!(pgd_none(*pgd) || pgd_bad(*pgd))) {
+		pmd = pmd_offset(pgd, address);
+		if (!(pmd_none(*pmd) || pmd_bad(*pmd))) {
+			ptep = pte_offset_map(pmd, address);
+			if (ptep) {
+				pte = *ptep;
+				if (pte_present(pte))
+					return pte & PAGE_MASK;
+			}
+		}
+	}
+
+	return 0;
+}
+
 /*
  *  ======== pte_update ========
  *      This function calculates the optimum page-aligned addresses and sizes
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h b/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
index 615363474810..173dfbb42019 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
@@ -161,6 +161,48 @@ typedef int(*fxn_brd_memwrite) (struct bridge_dev_context
 				       u32 dsp_addr, u32 ul_num_bytes,
 				       u32 mem_type);
 
+/*
+ *  ======== bridge_brd_mem_map ========
+ *  Purpose:
+ *      Map a MPU memory region to a DSP/IVA memory space
+ *  Parameters:
+ *      dev_ctxt:    Handle to Bridge driver defined device info.
+ *      ul_mpu_addr:      MPU memory region start address.
+ *      virt_addr:      DSP/IVA memory region u8 address.
+ *      ul_num_bytes:     Number of bytes to map.
+ *      map_attrs:       Mapping attributes (e.g. endianness).
+ *  Returns:
+ *      0:        Success.
+ *      -EPERM:      Other, unspecified error.
+ *  Requires:
+ *      dev_ctxt != NULL;
+ *  Ensures:
+ */
+typedef int(*fxn_brd_memmap) (struct bridge_dev_context
+				     * dev_ctxt, u32 ul_mpu_addr,
+				     u32 virt_addr, u32 ul_num_bytes,
+				     u32 map_attr,
+				     struct page **mapped_pages);
+
+/*
+ *  ======== bridge_brd_mem_un_map ========
+ *  Purpose:
+ *      UnMap an MPU memory region from DSP/IVA memory space
+ *  Parameters:
+ *      dev_ctxt:    Handle to Bridge driver defined device info.
+ *      virt_addr:      DSP/IVA memory region u8 address.
+ *      ul_num_bytes:     Number of bytes to unmap.
+ *  Returns:
+ *      0:        Success.
+ *      -EPERM:      Other, unspecified error.
+ *  Requires:
+ *      dev_ctxt != NULL;
+ *  Ensures:
+ */
+typedef int(*fxn_brd_memunmap) (struct bridge_dev_context
+				       * dev_ctxt,
+				       u32 da);
+
 /*
  *  ======== bridge_brd_stop ========
  *  Purpose:
@@ -951,6 +993,8 @@ struct bridge_drv_interface {
 	fxn_brd_setstate pfn_brd_set_state;	/* Sets the Board State */
 	fxn_brd_memcopy pfn_brd_mem_copy;	/* Copies DSP Memory */
 	fxn_brd_memwrite pfn_brd_mem_write;	/* Write DSP Memory w/o halt */
+	fxn_brd_memmap pfn_brd_mem_map;	/* Maps MPU mem to DSP mem */
+	fxn_brd_memunmap pfn_brd_mem_un_map;	/* Unmaps MPU mem to DSP mem */
 	fxn_chnl_create pfn_chnl_create;	/* Create channel manager. */
 	fxn_chnl_destroy pfn_chnl_destroy;	/* Destroy channel manager. */
 	fxn_chnl_open pfn_chnl_open;	/* Create a new channel. */
diff --git a/drivers/staging/tidspbridge/pmgr/dev.c b/drivers/staging/tidspbridge/pmgr/dev.c
index e3c78fbfb3c0..132e960967b9 100644
--- a/drivers/staging/tidspbridge/pmgr/dev.c
+++ b/drivers/staging/tidspbridge/pmgr/dev.c
@@ -1118,6 +1118,8 @@ static void store_interface_fxns(struct bridge_drv_interface *drv_fxns,
 		STORE_FXN(fxn_brd_setstate, pfn_brd_set_state);
 		STORE_FXN(fxn_brd_memcopy, pfn_brd_mem_copy);
 		STORE_FXN(fxn_brd_memwrite, pfn_brd_mem_write);
+		STORE_FXN(fxn_brd_memmap, pfn_brd_mem_map);
+		STORE_FXN(fxn_brd_memunmap, pfn_brd_mem_un_map);
 		STORE_FXN(fxn_chnl_create, pfn_chnl_create);
 		STORE_FXN(fxn_chnl_destroy, pfn_chnl_destroy);
 		STORE_FXN(fxn_chnl_open, pfn_chnl_open);
diff --git a/drivers/staging/tidspbridge/rmgr/proc.c b/drivers/staging/tidspbridge/rmgr/proc.c
index 59c946bb3ed2..97c5b61f1014 100644
--- a/drivers/staging/tidspbridge/rmgr/proc.c
+++ b/drivers/staging/tidspbridge/rmgr/proc.c
@@ -52,7 +52,6 @@
 #include <dspbridge/msg.h>
 #include <dspbridge/dspioctl.h>
 #include <dspbridge/drv.h>
-#include <_tiomap.h>
 
 /*  ----------------------------------- This */
 #include <dspbridge/proc.h>
@@ -1358,6 +1357,7 @@ int proc_map(void *hprocessor, void *pmpu_addr, u32 ul_size,
 	int status = 0;
 	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
 	struct dmm_map_object *map_obj;
+	u32 tmp_addr = 0;
 
 #ifdef CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK
 	if ((ul_map_attr & BUFMODE_MASK) != RBUF) {
@@ -1390,27 +1390,24 @@ int proc_map(void *hprocessor, void *pmpu_addr, u32 ul_size,
 
 	/* Add mapping to the page tables. */
 	if (!status) {
+
+		/* Mapped address = MSB of VA | LSB of PA */
+		tmp_addr = (va_align | ((u32) pmpu_addr & (PG_SIZE4K - 1)));
 		/* mapped memory resource tracking */
-		map_obj = add_mapping_info(pr_ctxt, pa_align, va_align,
+		map_obj = add_mapping_info(pr_ctxt, pa_align, tmp_addr,
 						size_align);
-		if (!map_obj) {
+		if (!map_obj)
 			status = -ENOMEM;
-		} else {
-			va_align = user_to_dsp_map(
-				p_proc_object->hbridge_context->dsp_mmu,
-				pa_align, va_align, size_align,
-				map_obj->pages);
-			if (IS_ERR_VALUE(va_align))
-				status = (int)va_align;
-		}
+		else
+			status = (*p_proc_object->intf_fxns->pfn_brd_mem_map)
+			    (p_proc_object->hbridge_context, pa_align, va_align,
+			     size_align, ul_map_attr, map_obj->pages);
 	}
 	if (!status) {
 		/* Mapped address = MSB of VA | LSB of PA */
-		map_obj->dsp_addr = (va_align |
-					((u32)pmpu_addr & (PG_SIZE4K - 1)));
-		*pp_map_addr = (void *)map_obj->dsp_addr;
+		*pp_map_addr = (void *) tmp_addr;
 	} else {
-		remove_mapping_information(pr_ctxt, va_align, size_align);
+		remove_mapping_information(pr_ctxt, tmp_addr, size_align);
 		dmm_un_map_memory(dmm_mgr, va_align, &size_align);
 	}
 	mutex_unlock(&proc_lock);
@@ -1724,9 +1721,10 @@ int proc_un_map(void *hprocessor, void *map_addr,
 	 */
 	status = dmm_un_map_memory(dmm_mgr, (u32) va_align, &size_align);
 	/* Remove mapping from the page tables. */
-	if (!status)
-		status = user_to_dsp_unmap(
-			p_proc_object->hbridge_context->dsp_mmu, va_align);
+	if (!status) {
+		status = (*p_proc_object->intf_fxns->pfn_brd_mem_un_map)
+		    (p_proc_object->hbridge_context, va_align);
+	}
 
 	mutex_unlock(&proc_lock);
 	if (status)

From 1cf3fb2d359a87880a6a6e0cb25b2ec2d493b119 Mon Sep 17 00:00:00 2001
From: Felipe Contreras <felipe.contreras@gmail.com>
Date: Wed, 10 Nov 2010 12:12:19 -0600
Subject: [PATCH 0447/1066] Revert "staging: tidspbridge - move shared memory
 iommu maps to tiomap3430.c"

This reverts commit 0c10e91b6cc9d1c6a23e9eed3e0653f30b6eb3d3.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
---
 drivers/staging/tidspbridge/core/_tiomap.h    |  13 --
 drivers/staging/tidspbridge/core/io_sm.c      | 125 ++++++++++++++--
 drivers/staging/tidspbridge/core/tiomap3430.c | 135 ++++--------------
 drivers/staging/tidspbridge/core/tiomap_io.c  |  12 +-
 4 files changed, 146 insertions(+), 139 deletions(-)

diff --git a/drivers/staging/tidspbridge/core/_tiomap.h b/drivers/staging/tidspbridge/core/_tiomap.h
index c1bf95d756b3..a42c3931fc7e 100644
--- a/drivers/staging/tidspbridge/core/_tiomap.h
+++ b/drivers/staging/tidspbridge/core/_tiomap.h
@@ -308,18 +308,6 @@ static const struct bpwr_clk_t bpwr_clks[] = {
 
 #define CLEAR_BIT_INDEX(reg, index)   (reg &= ~(1 << (index)))
 
-struct shm_segs {
-	u32 seg0_da;
-	u32 seg0_pa;
-	u32 seg0_va;
-	u32 seg0_size;
-	u32 seg1_da;
-	u32 seg1_pa;
-	u32 seg1_va;
-	u32 seg1_size;
-};
-
-
 /* This Bridge driver's device context: */
 struct bridge_dev_context {
 	struct dev_object *hdev_obj;	/* Handle to Bridge device object. */
@@ -343,7 +331,6 @@ struct bridge_dev_context {
 
 	struct omap_mbox *mbox;		/* Mail box handle */
 	struct iommu *dsp_mmu;      /* iommu for iva2 handler */
-	struct shm_segs sh_s;
 	struct cfg_hostres *resources;	/* Host Resources */
 
 	/*
diff --git a/drivers/staging/tidspbridge/core/io_sm.c b/drivers/staging/tidspbridge/core/io_sm.c
index 56856ad54fec..842b8dbc441a 100644
--- a/drivers/staging/tidspbridge/core/io_sm.c
+++ b/drivers/staging/tidspbridge/core/io_sm.c
@@ -291,7 +291,7 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 	struct cod_manager *cod_man;
 	struct chnl_mgr *hchnl_mgr;
 	struct msg_mgr *hmsg_mgr;
-	struct shm_segs *sm_sg;
+	struct iommu *mmu;
 	u32 ul_shm_base;
 	u32 ul_shm_base_offset;
 	u32 ul_shm_limit;
@@ -317,6 +317,14 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 	u32 shm0_end;
 	u32 ul_dyn_ext_base;
 	u32 ul_seg1_size = 0;
+	u32 pa_curr = 0;
+	u32 va_curr = 0;
+	u32 gpp_va_curr = 0;
+	u32 num_bytes = 0;
+	u32 all_bits = 0;
+	u32 page_size[] = { HW_PAGE_SIZE16MB, HW_PAGE_SIZE1MB,
+		HW_PAGE_SIZE64KB, HW_PAGE_SIZE4KB
+	};
 
 	status = dev_get_bridge_context(hio_mgr->hdev_obj, &pbridge_context);
 	if (!pbridge_context) {
@@ -329,7 +337,19 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 		status = -EFAULT;
 		goto func_end;
 	}
-	sm_sg = &pbridge_context->sh_s;
+	mmu = pbridge_context->dsp_mmu;
+
+	if (mmu)
+		iommu_put(mmu);
+	mmu = iommu_get("iva2");
+
+	if (IS_ERR_OR_NULL(mmu)) {
+		dev_err(bridge, "iommu_get failed!\n");
+		pbridge_context->dsp_mmu = NULL;
+		status = -EFAULT;
+		goto func_end;
+	}
+	pbridge_context->dsp_mmu = mmu;
 
 	status = dev_get_cod_mgr(hio_mgr->hdev_obj, &cod_man);
 	if (!cod_man) {
@@ -465,14 +485,74 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 	if (status)
 		goto func_end;
 
-	sm_sg->seg1_pa = ul_gpp_pa;
-	sm_sg->seg1_da = ul_dyn_ext_base;
-	sm_sg->seg1_va = ul_gpp_va;
-	sm_sg->seg1_size = ul_seg1_size;
-	sm_sg->seg0_pa = ul_gpp_pa + ul_pad_size + ul_seg1_size;
-	sm_sg->seg0_da = ul_dsp_va;
-	sm_sg->seg0_va = ul_gpp_va + ul_pad_size + ul_seg1_size;
-	sm_sg->seg0_size = ul_seg_size;
+	pa_curr = ul_gpp_pa;
+	va_curr = ul_dyn_ext_base * hio_mgr->word_size;
+	gpp_va_curr = ul_gpp_va;
+	num_bytes = ul_seg1_size;
+
+	va_curr = iommu_kmap(mmu, va_curr, pa_curr, num_bytes,
+					IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
+	if (IS_ERR_VALUE(va_curr)) {
+		status = (int)va_curr;
+		goto func_end;
+	}
+
+	pa_curr += ul_pad_size + num_bytes;
+	va_curr += ul_pad_size + num_bytes;
+	gpp_va_curr += ul_pad_size + num_bytes;
+
+	/* Configure the TLB entries for the next cacheable segment */
+	num_bytes = ul_seg_size;
+	va_curr = ul_dsp_va * hio_mgr->word_size;
+	while (num_bytes) {
+		/*
+		 * To find the max. page size with which both PA & VA are
+		 * aligned.
+		 */
+		all_bits = pa_curr | va_curr;
+		dev_dbg(bridge, "all_bits for Seg1 %x, pa_curr %x, "
+			"va_curr %x, num_bytes %x\n", all_bits, pa_curr,
+			va_curr, num_bytes);
+		for (i = 0; i < 4; i++) {
+			if (!(num_bytes >= page_size[i]) ||
+			    !((all_bits & (page_size[i] - 1)) == 0))
+				continue;
+			if (ndx < MAX_LOCK_TLB_ENTRIES) {
+				/*
+				 * This is the physical address written to
+				 * DSP MMU.
+				 */
+				ae_proc[ndx].ul_gpp_pa = pa_curr;
+				/*
+				 * This is the virtual uncached ioremapped
+				 * address!!!
+				 */
+				ae_proc[ndx].ul_gpp_va = gpp_va_curr;
+				ae_proc[ndx].ul_dsp_va =
+				    va_curr / hio_mgr->word_size;
+				ae_proc[ndx].ul_size = page_size[i];
+				ae_proc[ndx].endianism = HW_LITTLE_ENDIAN;
+				ae_proc[ndx].elem_size = HW_ELEM_SIZE16BIT;
+				ae_proc[ndx].mixed_mode = HW_MMU_CPUES;
+				dev_dbg(bridge, "shm MMU TLB entry PA %x"
+					" VA %x DSP_VA %x Size %x\n",
+					ae_proc[ndx].ul_gpp_pa,
+					ae_proc[ndx].ul_gpp_va,
+					ae_proc[ndx].ul_dsp_va *
+					hio_mgr->word_size, page_size[i]);
+				ndx++;
+			}
+			pa_curr += page_size[i];
+			va_curr += page_size[i];
+			gpp_va_curr += page_size[i];
+			num_bytes -= page_size[i];
+			/*
+			 * Don't try smaller sizes. Hopefully we have reached
+			 * an address aligned to a bigger page size.
+			 */
+			break;
+		}
+	}
 
 	/*
 	 * Copy remaining entries from CDB. All entries are 1 MB and
@@ -519,6 +599,24 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 			goto func_end;
 	}
 
+	/* Map the L4 peripherals */
+	i = 0;
+	while (l4_peripheral_table[i].phys_addr) {
+		status = iommu_kmap(mmu, l4_peripheral_table[i].
+			dsp_virt_addr, l4_peripheral_table[i].phys_addr,
+			PAGE_SIZE, IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
+		if (IS_ERR_VALUE(status))
+			break;
+		i++;
+	}
+	if (IS_ERR_VALUE(status)) {
+		while (i--)
+			iommu_kunmap(mmu, l4_peripheral_table[i].
+						dsp_virt_addr);
+		goto func_end;
+	}
+	status = 0;
+
 	for (i = ndx; i < BRDIOCTL_NUMOFMMUTLB; i++) {
 		ae_proc[i].ul_dsp_va = 0;
 		ae_proc[i].ul_gpp_pa = 0;
@@ -541,12 +639,12 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 		status = -EFAULT;
 		goto func_end;
 	} else {
-		if (sm_sg->seg0_da > ul_shm_base) {
+		if (ae_proc[0].ul_dsp_va > ul_shm_base) {
 			status = -EPERM;
 			goto func_end;
 		}
 		/* ul_shm_base may not be at ul_dsp_va address */
-		ul_shm_base_offset = (ul_shm_base - sm_sg->seg0_da) *
+		ul_shm_base_offset = (ul_shm_base - ae_proc[0].ul_dsp_va) *
 		    hio_mgr->word_size;
 		/*
 		 * bridge_dev_ctrl() will set dev context dsp-mmu info. In
@@ -570,7 +668,8 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 			goto func_end;
 		}
 		/* Register SM */
-		status = register_shm_segs(hio_mgr, cod_man, sm_sg->seg0_pa);
+		status =
+		    register_shm_segs(hio_mgr, cod_man, ae_proc[0].ul_gpp_pa);
 	}
 
 	hio_mgr->shared_mem = (struct shm *)ul_shm_base;
diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c
index 7ab272ca643d..ec85529efee0 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430.c
@@ -301,7 +301,8 @@ static int bridge_brd_monitor(struct bridge_dev_context *dev_ctxt)
 		(*pdata->dsp_cm_write)(OMAP34XX_CLKSTCTRL_DISABLE_AUTO,
 					OMAP3430_IVA2_MOD, OMAP2_CM_CLKSTCTRL);
 	}
-
+	(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK, 0,
+					OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 	dsp_clk_enable(DSP_CLK_IVA2);
 
 	/* set the device state to IDLE */
@@ -372,17 +373,15 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 {
 	int status = 0;
 	struct bridge_dev_context *dev_context = dev_ctxt;
-	struct iommu *mmu = NULL;
-	struct shm_segs *sm_sg;
-	int l4_i = 0, tlb_i = 0;
-	u32 sg0_da = 0, sg1_da = 0;
-	struct bridge_ioctl_extproc *tlb = dev_context->atlb_entry;
+	struct iommu *mmu;
 	u32 dw_sync_addr = 0;
 	u32 ul_shm_base;	/* Gpp Phys SM base addr(byte) */
 	u32 ul_shm_base_virt;	/* Dsp Virt SM base addr */
 	u32 ul_tlb_base_virt;	/* Base of MMU TLB entry */
 	/* Offset of shm_base_virt from tlb_base_virt */
 	u32 ul_shm_offset_virt;
+	s32 entry_ndx;
+	s32 itmp_entry_ndx = 0;	/* DSP-MMU TLB entry base address */
 	struct cfg_hostres *resources = NULL;
 	u32 temp;
 	u32 ul_dsp_clk_rate;
@@ -394,6 +393,7 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 	struct omap_dsp_platform_data *pdata =
 		omap_dspbridge_dev->dev.platform_data;
 
+	mmu = dev_context->dsp_mmu;
 	/* The device context contains all the mmu setup info from when the
 	 * last dsp base image was loaded. The first entry is always
 	 * SHMMEM base. */
@@ -403,12 +403,12 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 	ul_shm_base_virt *= DSPWORDSIZE;
 	DBC_ASSERT(ul_shm_base_virt != 0);
 	/* DSP Virtual address */
-	ul_tlb_base_virt = dev_context->sh_s.seg0_da;
+	ul_tlb_base_virt = dev_context->atlb_entry[0].ul_dsp_va;
 	DBC_ASSERT(ul_tlb_base_virt <= ul_shm_base_virt);
 	ul_shm_offset_virt =
 	    ul_shm_base_virt - (ul_tlb_base_virt * DSPWORDSIZE);
 	/* Kernel logical address */
-	ul_shm_base = dev_context->sh_s.seg0_va + ul_shm_offset_virt;
+	ul_shm_base = dev_context->atlb_entry[0].ul_gpp_va + ul_shm_offset_virt;
 
 	DBC_ASSERT(ul_shm_base != 0);
 	/* 2nd wd is used as sync field */
@@ -443,70 +443,25 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 					OMAP343X_CONTROL_IVA2_BOOTMOD));
 		}
 	}
+	if (!status) {
+		/* Only make TLB entry if both addresses are non-zero */
+		for (entry_ndx = 0; entry_ndx < BRDIOCTL_NUMOFMMUTLB;
+		     entry_ndx++) {
+			struct bridge_ioctl_extproc *e = &dev_context->atlb_entry[entry_ndx];
 
-	if (!status) {
-		(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK, 0,
-					OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-		mmu = dev_context->dsp_mmu;
-		if (mmu)
-			iommu_put(mmu);
-		mmu = iommu_get("iva2");
-		if (IS_ERR(mmu)) {
-			dev_err(bridge, "iommu_get failed!\n");
-			dev_context->dsp_mmu = NULL;
-			status = (int)mmu;
-		}
-	}
-	if (!status) {
-		dev_context->dsp_mmu = mmu;
-		sm_sg = &dev_context->sh_s;
-		sg0_da = iommu_kmap(mmu, sm_sg->seg0_da, sm_sg->seg0_pa,
-			sm_sg->seg0_size, IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
-		if (IS_ERR_VALUE(sg0_da)) {
-			status = (int)sg0_da;
-			sg0_da = 0;
-		}
-	}
-	if (!status) {
-		sg1_da = iommu_kmap(mmu, sm_sg->seg1_da, sm_sg->seg1_pa,
-			sm_sg->seg1_size, IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
-		if (IS_ERR_VALUE(sg1_da)) {
-			status = (int)sg1_da;
-			sg1_da = 0;
-		}
-	}
-	if (!status) {
-		u32 da;
-		for (tlb_i = 0; tlb_i < BRDIOCTL_NUMOFMMUTLB; tlb_i++) {
-			if (!tlb[tlb_i].ul_gpp_pa)
+			if (!e->ul_gpp_pa || !e->ul_dsp_va)
 				continue;
 
-			dev_dbg(bridge, "IOMMU %d GppPa: 0x%x DspVa 0x%x Size"
-				" 0x%x\n", tlb_i, tlb[tlb_i].ul_gpp_pa,
-				tlb[tlb_i].ul_dsp_va, tlb[tlb_i].ul_size);
+			dev_dbg(bridge,
+					"MMU %d, pa: 0x%x, va: 0x%x, size: 0x%x",
+					itmp_entry_ndx,
+					e->ul_gpp_pa,
+					e->ul_dsp_va,
+					e->ul_size);
 
-			da = iommu_kmap(mmu, tlb[tlb_i].ul_dsp_va,
-				tlb[tlb_i].ul_gpp_pa, PAGE_SIZE,
+			iommu_kmap(mmu, e->ul_dsp_va, e->ul_gpp_pa, e->ul_size,
 				IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
-			if (IS_ERR_VALUE(da)) {
-				status = (int)da;
-				break;
-			}
-		}
-	}
-	if (!status) {
-		u32 da;
-		l4_i = 0;
-		while (l4_peripheral_table[l4_i].phys_addr) {
-			da = iommu_kmap(mmu, l4_peripheral_table[l4_i].
-				dsp_virt_addr, l4_peripheral_table[l4_i].
-				phys_addr, PAGE_SIZE,
-				IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
-			if (IS_ERR_VALUE(da)) {
-				status = (int)da;
-				break;
-			}
-			l4_i++;
+			itmp_entry_ndx++;
 		}
 	}
 
@@ -619,23 +574,11 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 
 			/* update board state */
 			dev_context->dw_brd_state = BRD_RUNNING;
-			return 0;
+			/* (void)chnlsm_enable_interrupt(dev_context); */
 		} else {
 			dev_context->dw_brd_state = BRD_UNKNOWN;
 		}
 	}
-
-	while (tlb_i--) {
-		if (!tlb[tlb_i].ul_gpp_pa)
-			continue;
-		iommu_kunmap(mmu, tlb[tlb_i].ul_gpp_va);
-	}
-	while (l4_i--)
-		iommu_kunmap(mmu, l4_peripheral_table[l4_i].dsp_virt_addr);
-	if (sg0_da)
-		iommu_kunmap(mmu, sg0_da);
-	if (sg1_da)
-		iommu_kunmap(mmu, sg1_da);
 	return status;
 }
 
@@ -653,8 +596,6 @@ static int bridge_brd_stop(struct bridge_dev_context *dev_ctxt)
 	struct bridge_dev_context *dev_context = dev_ctxt;
 	struct pg_table_attrs *pt_attrs;
 	u32 dsp_pwr_state;
-	int i;
-	struct bridge_ioctl_extproc *tlb = dev_context->atlb_entry;
 	struct omap_dsp_platform_data *pdata =
 		omap_dspbridge_dev->dev.platform_data;
 
@@ -698,37 +639,17 @@ static int bridge_brd_stop(struct bridge_dev_context *dev_ctxt)
 		memset((u8 *) pt_attrs->pg_info, 0x00,
 		       (pt_attrs->l2_num_pages * sizeof(struct page_info)));
 	}
-	/* Reset DSP */
-	(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK,
-		OMAP3430_RST1_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
 	/* Disable the mailbox interrupts */
 	if (dev_context->mbox) {
 		omap_mbox_disable_irq(dev_context->mbox, IRQ_RX);
 		omap_mbox_put(dev_context->mbox);
 		dev_context->mbox = NULL;
 	}
-	if (dev_context->dsp_mmu) {
-		pr_err("Proc stop mmu if statement\n");
-		for (i = 0; i < BRDIOCTL_NUMOFMMUTLB; i++) {
-			if (!tlb[i].ul_gpp_pa)
-				continue;
-			iommu_kunmap(dev_context->dsp_mmu, tlb[i].ul_gpp_va);
-		}
-		i = 0;
-		while (l4_peripheral_table[i].phys_addr) {
-			iommu_kunmap(dev_context->dsp_mmu,
-				l4_peripheral_table[i].dsp_virt_addr);
-			i++;
-		}
-		iommu_kunmap(dev_context->dsp_mmu, dev_context->sh_s.seg0_da);
-		iommu_kunmap(dev_context->dsp_mmu, dev_context->sh_s.seg1_da);
-		iommu_put(dev_context->dsp_mmu);
-		dev_context->dsp_mmu = NULL;
-	}
-	/* Reset IVA IOMMU*/
-	(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK,
-		OMAP3430_RST2_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+	if (dev_context->dsp_mmu)
+		dev_context->dsp_mmu = (iommu_put(dev_context->dsp_mmu), NULL);
+	/* Reset IVA2 clocks*/
+	(*pdata->dsp_prm_write)(OMAP3430_RST1_IVA2_MASK | OMAP3430_RST2_IVA2_MASK |
+			OMAP3430_RST3_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 
 	dsp_clock_disable_all(dev_context->dsp_per_clks);
 	dsp_clk_disable(DSP_CLK_IVA2);
diff --git a/drivers/staging/tidspbridge/core/tiomap_io.c b/drivers/staging/tidspbridge/core/tiomap_io.c
index 5ba679577354..ba2961049dad 100644
--- a/drivers/staging/tidspbridge/core/tiomap_io.c
+++ b/drivers/staging/tidspbridge/core/tiomap_io.c
@@ -134,9 +134,10 @@ int read_ext_dsp_data(struct bridge_dev_context *dev_ctxt,
 
 		if (!status) {
 			ul_tlb_base_virt =
-			    dev_context->sh_s.seg0_da * DSPWORDSIZE;
+			    dev_context->atlb_entry[0].ul_dsp_va * DSPWORDSIZE;
 			DBC_ASSERT(ul_tlb_base_virt <= ul_shm_base_virt);
-			dw_ext_prog_virt_mem = dev_context->sh_s.seg0_va;
+			dw_ext_prog_virt_mem =
+			    dev_context->atlb_entry[0].ul_gpp_va;
 
 			if (!trace_read) {
 				ul_shm_offset_virt =
@@ -317,9 +318,8 @@ int write_ext_dsp_data(struct bridge_dev_context *dev_context,
 			ret = -EPERM;
 
 		if (!ret) {
-			ul_tlb_base_virt = dev_context->sh_s.seg0_da *
-								DSPWORDSIZE;
-
+			ul_tlb_base_virt =
+			    dev_context->atlb_entry[0].ul_dsp_va * DSPWORDSIZE;
 			DBC_ASSERT(ul_tlb_base_virt <= ul_shm_base_virt);
 
 			if (symbols_reloaded) {
@@ -337,7 +337,7 @@ int write_ext_dsp_data(struct bridge_dev_context *dev_context,
 			    ul_shm_base_virt - ul_tlb_base_virt;
 			if (trace_load) {
 				dw_ext_prog_virt_mem =
-					dev_context->sh_s.seg0_va;
+				    dev_context->atlb_entry[0].ul_gpp_va;
 			} else {
 				dw_ext_prog_virt_mem = host_res->dw_mem_base[1];
 				dw_ext_prog_virt_mem +=

From 50ad26f4c9710a64c3728f08c3fa6f4b6a869376 Mon Sep 17 00:00:00 2001
From: Felipe Contreras <felipe.contreras@gmail.com>
Date: Wed, 10 Nov 2010 12:12:45 -0600
Subject: [PATCH 0448/1066] Revert "staging: tidspbridge: replace iommu custom
 for opensource implementation"

This reverts commit d95ec7e2fd5cebf2f1caf3f572fa5e0a820ac5b1.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
---
 drivers/staging/tidspbridge/core/_tiomap.h    |   4 +-
 drivers/staging/tidspbridge/core/io_sm.c      | 121 ++--
 drivers/staging/tidspbridge/core/tiomap3430.c | 516 ++++++++++++++----
 drivers/staging/tidspbridge/core/ue_deh.c     |   8 +
 .../tidspbridge/include/dspbridge/dspdefs.h   |   2 +-
 drivers/staging/tidspbridge/rmgr/proc.c       |   2 +-
 6 files changed, 518 insertions(+), 135 deletions(-)

diff --git a/drivers/staging/tidspbridge/core/_tiomap.h b/drivers/staging/tidspbridge/core/_tiomap.h
index a42c3931fc7e..1c1f157e167a 100644
--- a/drivers/staging/tidspbridge/core/_tiomap.h
+++ b/drivers/staging/tidspbridge/core/_tiomap.h
@@ -23,8 +23,6 @@
 #include <plat/clockdomain.h>
 #include <mach-omap2/prm-regbits-34xx.h>
 #include <mach-omap2/cm-regbits-34xx.h>
-#include <plat/iommu.h>
-#include <plat/iovmm.h>
 #include <dspbridge/devdefs.h>
 #include <hw_defs.h>
 #include <dspbridge/dspioctl.h>	/* for bridge_ioctl_extproc defn */
@@ -330,7 +328,7 @@ struct bridge_dev_context {
 	u32 dw_internal_size;	/* Internal memory size */
 
 	struct omap_mbox *mbox;		/* Mail box handle */
-	struct iommu *dsp_mmu;      /* iommu for iva2 handler */
+
 	struct cfg_hostres *resources;	/* Host Resources */
 
 	/*
diff --git a/drivers/staging/tidspbridge/core/io_sm.c b/drivers/staging/tidspbridge/core/io_sm.c
index 842b8dbc441a..571864555ddd 100644
--- a/drivers/staging/tidspbridge/core/io_sm.c
+++ b/drivers/staging/tidspbridge/core/io_sm.c
@@ -291,7 +291,6 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 	struct cod_manager *cod_man;
 	struct chnl_mgr *hchnl_mgr;
 	struct msg_mgr *hmsg_mgr;
-	struct iommu *mmu;
 	u32 ul_shm_base;
 	u32 ul_shm_base_offset;
 	u32 ul_shm_limit;
@@ -314,6 +313,7 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 	struct bridge_ioctl_extproc ae_proc[BRDIOCTL_NUMOFMMUTLB];
 	struct cfg_hostres *host_res;
 	struct bridge_dev_context *pbridge_context;
+	u32 map_attrs;
 	u32 shm0_end;
 	u32 ul_dyn_ext_base;
 	u32 ul_seg1_size = 0;
@@ -337,20 +337,6 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 		status = -EFAULT;
 		goto func_end;
 	}
-	mmu = pbridge_context->dsp_mmu;
-
-	if (mmu)
-		iommu_put(mmu);
-	mmu = iommu_get("iva2");
-
-	if (IS_ERR_OR_NULL(mmu)) {
-		dev_err(bridge, "iommu_get failed!\n");
-		pbridge_context->dsp_mmu = NULL;
-		status = -EFAULT;
-		goto func_end;
-	}
-	pbridge_context->dsp_mmu = mmu;
-
 	status = dev_get_cod_mgr(hio_mgr->hdev_obj, &cod_man);
 	if (!cod_man) {
 		status = -EFAULT;
@@ -490,16 +476,55 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 	gpp_va_curr = ul_gpp_va;
 	num_bytes = ul_seg1_size;
 
-	va_curr = iommu_kmap(mmu, va_curr, pa_curr, num_bytes,
-					IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
-	if (IS_ERR_VALUE(va_curr)) {
-		status = (int)va_curr;
-		goto func_end;
-	}
+	/*
+	 * Try to fit into TLB entries. If not possible, push them to page
+	 * tables. It is quite possible that if sections are not on
+	 * bigger page boundary, we may end up making several small pages.
+	 * So, push them onto page tables, if that is the case.
+	 */
+	map_attrs = 0x00000000;
+	map_attrs = DSP_MAPLITTLEENDIAN;
+	map_attrs |= DSP_MAPPHYSICALADDR;
+	map_attrs |= DSP_MAPELEMSIZE32;
+	map_attrs |= DSP_MAPDONOTLOCK;
 
-	pa_curr += ul_pad_size + num_bytes;
-	va_curr += ul_pad_size + num_bytes;
-	gpp_va_curr += ul_pad_size + num_bytes;
+	while (num_bytes) {
+		/*
+		 * To find the max. page size with which both PA & VA are
+		 * aligned.
+		 */
+		all_bits = pa_curr | va_curr;
+		dev_dbg(bridge, "all_bits %x, pa_curr %x, va_curr %x, "
+			"num_bytes %x\n", all_bits, pa_curr, va_curr,
+			num_bytes);
+		for (i = 0; i < 4; i++) {
+			if ((num_bytes >= page_size[i]) && ((all_bits &
+							     (page_size[i] -
+							      1)) == 0)) {
+				status =
+				    hio_mgr->intf_fxns->
+				    pfn_brd_mem_map(hio_mgr->hbridge_context,
+						    pa_curr, va_curr,
+						    page_size[i], map_attrs,
+						    NULL);
+				if (status)
+					goto func_end;
+				pa_curr += page_size[i];
+				va_curr += page_size[i];
+				gpp_va_curr += page_size[i];
+				num_bytes -= page_size[i];
+				/*
+				 * Don't try smaller sizes. Hopefully we have
+				 * reached an address aligned to a bigger page
+				 * size.
+				 */
+				break;
+			}
+		}
+	}
+	pa_curr += ul_pad_size;
+	va_curr += ul_pad_size;
+	gpp_va_curr += ul_pad_size;
 
 	/* Configure the TLB entries for the next cacheable segment */
 	num_bytes = ul_seg_size;
@@ -541,6 +566,22 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 					ae_proc[ndx].ul_dsp_va *
 					hio_mgr->word_size, page_size[i]);
 				ndx++;
+			} else {
+				status =
+				    hio_mgr->intf_fxns->
+				    pfn_brd_mem_map(hio_mgr->hbridge_context,
+						    pa_curr, va_curr,
+						    page_size[i], map_attrs,
+						    NULL);
+				dev_dbg(bridge,
+					"shm MMU PTE entry PA %x"
+					" VA %x DSP_VA %x Size %x\n",
+					ae_proc[ndx].ul_gpp_pa,
+					ae_proc[ndx].ul_gpp_va,
+					ae_proc[ndx].ul_dsp_va *
+					hio_mgr->word_size, page_size[i]);
+				if (status)
+					goto func_end;
 			}
 			pa_curr += page_size[i];
 			va_curr += page_size[i];
@@ -593,29 +634,37 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 					"DSP_VA 0x%x\n", ae_proc[ndx].ul_gpp_pa,
 					ae_proc[ndx].ul_dsp_va);
 				ndx++;
+			} else {
+				status = hio_mgr->intf_fxns->pfn_brd_mem_map
+				    (hio_mgr->hbridge_context,
+				     hio_mgr->ext_proc_info.ty_tlb[i].
+				     ul_gpp_phys,
+				     hio_mgr->ext_proc_info.ty_tlb[i].
+				     ul_dsp_virt, 0x100000, map_attrs,
+				     NULL);
 			}
 		}
 		if (status)
 			goto func_end;
 	}
 
+	map_attrs = 0x00000000;
+	map_attrs = DSP_MAPLITTLEENDIAN;
+	map_attrs |= DSP_MAPPHYSICALADDR;
+	map_attrs |= DSP_MAPELEMSIZE32;
+	map_attrs |= DSP_MAPDONOTLOCK;
+
 	/* Map the L4 peripherals */
 	i = 0;
 	while (l4_peripheral_table[i].phys_addr) {
-		status = iommu_kmap(mmu, l4_peripheral_table[i].
-			dsp_virt_addr, l4_peripheral_table[i].phys_addr,
-			PAGE_SIZE, IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
-		if (IS_ERR_VALUE(status))
-			break;
+		status = hio_mgr->intf_fxns->pfn_brd_mem_map
+		    (hio_mgr->hbridge_context, l4_peripheral_table[i].phys_addr,
+		     l4_peripheral_table[i].dsp_virt_addr, HW_PAGE_SIZE4KB,
+		     map_attrs, NULL);
+		if (status)
+			goto func_end;
 		i++;
 	}
-	if (IS_ERR_VALUE(status)) {
-		while (i--)
-			iommu_kunmap(mmu, l4_peripheral_table[i].
-						dsp_virt_addr);
-		goto func_end;
-	}
-	status = 0;
 
 	for (i = ndx; i < BRDIOCTL_NUMOFMMUTLB; i++) {
 		ae_proc[i].ul_dsp_va = 0;
diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c
index ec85529efee0..1be081f917a7 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430.c
@@ -114,7 +114,7 @@ static int bridge_brd_mem_map(struct bridge_dev_context *dev_ctxt,
 				  u32 ul_num_bytes, u32 ul_map_attr,
 				  struct page **mapped_pages);
 static int bridge_brd_mem_un_map(struct bridge_dev_context *dev_ctxt,
-				     u32 da);
+				     u32 virt_addr, u32 ul_num_bytes);
 static int bridge_dev_create(struct bridge_dev_context
 					**dev_cntxt,
 					struct dev_object *hdev_obj,
@@ -122,8 +122,6 @@ static int bridge_dev_create(struct bridge_dev_context
 static int bridge_dev_ctrl(struct bridge_dev_context *dev_context,
 				  u32 dw_cmd, void *pargs);
 static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt);
-static int get_io_pages(struct mm_struct *mm, u32 uva, unsigned pages,
-						struct page **usr_pgs);
 static u32 user_va2_pa(struct mm_struct *mm, u32 address);
 static int pte_update(struct bridge_dev_context *dev_ctxt, u32 pa,
 			     u32 va, u32 size,
@@ -373,7 +371,6 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 {
 	int status = 0;
 	struct bridge_dev_context *dev_context = dev_ctxt;
-	struct iommu *mmu;
 	u32 dw_sync_addr = 0;
 	u32 ul_shm_base;	/* Gpp Phys SM base addr(byte) */
 	u32 ul_shm_base_virt;	/* Dsp Virt SM base addr */
@@ -393,7 +390,6 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 	struct omap_dsp_platform_data *pdata =
 		omap_dspbridge_dev->dev.platform_data;
 
-	mmu = dev_context->dsp_mmu;
 	/* The device context contains all the mmu setup info from when the
 	 * last dsp base image was loaded. The first entry is always
 	 * SHMMEM base. */
@@ -444,10 +440,29 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 		}
 	}
 	if (!status) {
+		/* Reset and Unreset the RST2, so that BOOTADDR is copied to
+		 * IVA2 SYSC register */
+		(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK,
+			OMAP3430_RST2_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+		udelay(100);
+		(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK, 0,
+					OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+		udelay(100);
+
+		/* Disbale the DSP MMU */
+		hw_mmu_disable(resources->dw_dmmu_base);
+		/* Disable TWL */
+		hw_mmu_twl_disable(resources->dw_dmmu_base);
+
 		/* Only make TLB entry if both addresses are non-zero */
 		for (entry_ndx = 0; entry_ndx < BRDIOCTL_NUMOFMMUTLB;
 		     entry_ndx++) {
 			struct bridge_ioctl_extproc *e = &dev_context->atlb_entry[entry_ndx];
+			struct hw_mmu_map_attrs_t map_attrs = {
+				.endianism = e->endianism,
+				.element_size = e->elem_size,
+				.mixed_size = e->mixed_mode,
+			};
 
 			if (!e->ul_gpp_pa || !e->ul_dsp_va)
 				continue;
@@ -459,8 +474,13 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 					e->ul_dsp_va,
 					e->ul_size);
 
-			iommu_kmap(mmu, e->ul_dsp_va, e->ul_gpp_pa, e->ul_size,
-				IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
+			hw_mmu_tlb_add(dev_context->dw_dsp_mmu_base,
+					e->ul_gpp_pa,
+					e->ul_dsp_va,
+					e->ul_size,
+					itmp_entry_ndx,
+					&map_attrs, 1, 1);
+
 			itmp_entry_ndx++;
 		}
 	}
@@ -468,13 +488,29 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 	/* Lock the above TLB entries and get the BIOS and load monitor timer
 	 * information */
 	if (!status) {
+		hw_mmu_num_locked_set(resources->dw_dmmu_base, itmp_entry_ndx);
+		hw_mmu_victim_num_set(resources->dw_dmmu_base, itmp_entry_ndx);
+		hw_mmu_ttb_set(resources->dw_dmmu_base,
+			       dev_context->pt_attrs->l1_base_pa);
+		hw_mmu_twl_enable(resources->dw_dmmu_base);
+		/* Enable the SmartIdle and AutoIdle bit for MMU_SYSCONFIG */
+
+		temp = __raw_readl((resources->dw_dmmu_base) + 0x10);
+		temp = (temp & 0xFFFFFFEF) | 0x11;
+		__raw_writel(temp, (resources->dw_dmmu_base) + 0x10);
+
+		/* Let the DSP MMU run */
+		hw_mmu_enable(resources->dw_dmmu_base);
+
 		/* Enable the BIOS clock */
 		(void)dev_get_symbol(dev_context->hdev_obj,
 				     BRIDGEINIT_BIOSGPTIMER, &ul_bios_gp_timer);
 		(void)dev_get_symbol(dev_context->hdev_obj,
 				     BRIDGEINIT_LOADMON_GPTIMER,
 				     &ul_load_monitor_timer);
+	}
 
+	if (!status) {
 		if (ul_load_monitor_timer != 0xFFFF) {
 			clk_cmd = (BPWR_ENABLE_CLOCK << MBX_PM_CLK_CMDSHIFT) |
 			    ul_load_monitor_timer;
@@ -483,7 +519,9 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 			dev_dbg(bridge, "Not able to get the symbol for Load "
 				"Monitor Timer\n");
 		}
+	}
 
+	if (!status) {
 		if (ul_bios_gp_timer != 0xFFFF) {
 			clk_cmd = (BPWR_ENABLE_CLOCK << MBX_PM_CLK_CMDSHIFT) |
 			    ul_bios_gp_timer;
@@ -492,7 +530,9 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 			dev_dbg(bridge,
 				"Not able to get the symbol for BIOS Timer\n");
 		}
+	}
 
+	if (!status) {
 		/* Set the DSP clock rate */
 		(void)dev_get_symbol(dev_context->hdev_obj,
 				     "_BRIDGEINIT_DSP_FREQ", &ul_dsp_clk_addr);
@@ -545,6 +585,9 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 
 		/* Let DSP go */
 		dev_dbg(bridge, "%s Unreset\n", __func__);
+		/* Enable DSP MMU Interrupts */
+		hw_mmu_event_enable(resources->dw_dmmu_base,
+				    HW_MMU_ALL_INTERRUPTS);
 		/* release the RST1, DSP starts executing now .. */
 		(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK, 0,
 					OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
@@ -645,8 +688,6 @@ static int bridge_brd_stop(struct bridge_dev_context *dev_ctxt)
 		omap_mbox_put(dev_context->mbox);
 		dev_context->mbox = NULL;
 	}
-	if (dev_context->dsp_mmu)
-		dev_context->dsp_mmu = (iommu_put(dev_context->dsp_mmu), NULL);
 	/* Reset IVA2 clocks*/
 	(*pdata->dsp_prm_write)(OMAP3430_RST1_IVA2_MASK | OMAP3430_RST2_IVA2_MASK |
 			OMAP3430_RST3_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
@@ -1095,81 +1136,217 @@ static int bridge_brd_mem_write(struct bridge_dev_context *dev_ctxt,
  *
  *  TODO: Disable MMU while updating the page tables (but that'll stall DSP)
  */
-static int bridge_brd_mem_map(struct bridge_dev_context *dev_ctx,
-			u32 uva, u32 da, u32 size, u32 attr,
-			struct page **usr_pgs)
-
+static int bridge_brd_mem_map(struct bridge_dev_context *dev_ctxt,
+				  u32 ul_mpu_addr, u32 virt_addr,
+				  u32 ul_num_bytes, u32 ul_map_attr,
+				  struct page **mapped_pages)
 {
-	int res, w;
-	unsigned pages, i;
-	struct iommu *mmu = dev_ctx->dsp_mmu;
+	u32 attrs;
+	int status = 0;
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	struct hw_mmu_map_attrs_t hw_attrs;
 	struct vm_area_struct *vma;
 	struct mm_struct *mm = current->mm;
-	struct sg_table *sgt;
-	struct scatterlist *sg;
+	u32 write = 0;
+	u32 num_usr_pgs = 0;
+	struct page *mapped_page, *pg;
+	s32 pg_num;
+	u32 va = virt_addr;
+	struct task_struct *curr_task = current;
+	u32 pg_i = 0;
+	u32 mpu_addr, pa;
 
-	if (!size || !usr_pgs)
+	dev_dbg(bridge,
+		"%s hDevCtxt %p, pa %x, va %x, size %x, ul_map_attr %x\n",
+		__func__, dev_ctxt, ul_mpu_addr, virt_addr, ul_num_bytes,
+		ul_map_attr);
+	if (ul_num_bytes == 0)
 		return -EINVAL;
 
-	pages = size / PG_SIZE4K;
+	if (ul_map_attr & DSP_MAP_DIR_MASK) {
+		attrs = ul_map_attr;
+	} else {
+		/* Assign default attributes */
+		attrs = ul_map_attr | (DSP_MAPVIRTUALADDR | DSP_MAPELEMSIZE16);
+	}
+	/* Take mapping properties */
+	if (attrs & DSP_MAPBIGENDIAN)
+		hw_attrs.endianism = HW_BIG_ENDIAN;
+	else
+		hw_attrs.endianism = HW_LITTLE_ENDIAN;
 
+	hw_attrs.mixed_size = (enum hw_mmu_mixed_size_t)
+	    ((attrs & DSP_MAPMIXEDELEMSIZE) >> 2);
+	/* Ignore element_size if mixed_size is enabled */
+	if (hw_attrs.mixed_size == 0) {
+		if (attrs & DSP_MAPELEMSIZE8) {
+			/* Size is 8 bit */
+			hw_attrs.element_size = HW_ELEM_SIZE8BIT;
+		} else if (attrs & DSP_MAPELEMSIZE16) {
+			/* Size is 16 bit */
+			hw_attrs.element_size = HW_ELEM_SIZE16BIT;
+		} else if (attrs & DSP_MAPELEMSIZE32) {
+			/* Size is 32 bit */
+			hw_attrs.element_size = HW_ELEM_SIZE32BIT;
+		} else if (attrs & DSP_MAPELEMSIZE64) {
+			/* Size is 64 bit */
+			hw_attrs.element_size = HW_ELEM_SIZE64BIT;
+		} else {
+			/*
+			 * Mixedsize isn't enabled, so size can't be
+			 * zero here
+			 */
+			return -EINVAL;
+		}
+	}
+	if (attrs & DSP_MAPDONOTLOCK)
+		hw_attrs.donotlockmpupage = 1;
+	else
+		hw_attrs.donotlockmpupage = 0;
+
+	if (attrs & DSP_MAPVMALLOCADDR) {
+		return mem_map_vmalloc(dev_ctxt, ul_mpu_addr, virt_addr,
+				       ul_num_bytes, &hw_attrs);
+	}
+	/*
+	 * Do OS-specific user-va to pa translation.
+	 * Combine physically contiguous regions to reduce TLBs.
+	 * Pass the translated pa to pte_update.
+	 */
+	if ((attrs & DSP_MAPPHYSICALADDR)) {
+		status = pte_update(dev_context, ul_mpu_addr, virt_addr,
+				    ul_num_bytes, &hw_attrs);
+		goto func_cont;
+	}
+
+	/*
+	 * Important Note: ul_mpu_addr is mapped from user application process
+	 * to current process - it must lie completely within the current
+	 * virtual memory address space in order to be of use to us here!
+	 */
 	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, uva);
-	while (vma && (uva + size > vma->vm_end))
-		vma = find_vma(mm, vma->vm_end + 1);
+	vma = find_vma(mm, ul_mpu_addr);
+	if (vma)
+		dev_dbg(bridge,
+			"VMAfor UserBuf: ul_mpu_addr=%x, ul_num_bytes=%x, "
+			"vm_start=%lx, vm_end=%lx, vm_flags=%lx\n", ul_mpu_addr,
+			ul_num_bytes, vma->vm_start, vma->vm_end,
+			vma->vm_flags);
 
+	/*
+	 * It is observed that under some circumstances, the user buffer is
+	 * spread across several VMAs. So loop through and check if the entire
+	 * user buffer is covered
+	 */
+	while ((vma) && (ul_mpu_addr + ul_num_bytes > vma->vm_end)) {
+		/* jump to the next VMA region */
+		vma = find_vma(mm, vma->vm_end + 1);
+		dev_dbg(bridge,
+			"VMA for UserBuf ul_mpu_addr=%x ul_num_bytes=%x, "
+			"vm_start=%lx, vm_end=%lx, vm_flags=%lx\n", ul_mpu_addr,
+			ul_num_bytes, vma->vm_start, vma->vm_end,
+			vma->vm_flags);
+	}
 	if (!vma) {
 		pr_err("%s: Failed to get VMA region for 0x%x (%d)\n",
-						__func__, uva, size);
+		       __func__, ul_mpu_addr, ul_num_bytes);
+		status = -EINVAL;
 		up_read(&mm->mmap_sem);
-		return -EINVAL;
+		goto func_cont;
 	}
-	if (vma->vm_flags & (VM_WRITE | VM_MAYWRITE))
-		w = 1;
 
-	if (vma->vm_flags & VM_IO)
-		i = get_io_pages(mm, uva, pages, usr_pgs);
-	else
-		i = get_user_pages(current, mm, uva, pages, w, 1,
-							usr_pgs, NULL);
+	if (vma->vm_flags & VM_IO) {
+		num_usr_pgs = ul_num_bytes / PG_SIZE4K;
+		mpu_addr = ul_mpu_addr;
+
+		/* Get the physical addresses for user buffer */
+		for (pg_i = 0; pg_i < num_usr_pgs; pg_i++) {
+			pa = user_va2_pa(mm, mpu_addr);
+			if (!pa) {
+				status = -EPERM;
+				pr_err("DSPBRIDGE: VM_IO mapping physical"
+				       "address is invalid\n");
+				break;
+			}
+			if (pfn_valid(__phys_to_pfn(pa))) {
+				pg = PHYS_TO_PAGE(pa);
+				get_page(pg);
+				if (page_count(pg) < 1) {
+					pr_err("Bad page in VM_IO buffer\n");
+					bad_page_dump(pa, pg);
+				}
+			}
+			status = pte_set(dev_context->pt_attrs, pa,
+					 va, HW_PAGE_SIZE4KB, &hw_attrs);
+			if (status)
+				break;
+
+			va += HW_PAGE_SIZE4KB;
+			mpu_addr += HW_PAGE_SIZE4KB;
+			pa += HW_PAGE_SIZE4KB;
+		}
+	} else {
+		num_usr_pgs = ul_num_bytes / PG_SIZE4K;
+		if (vma->vm_flags & (VM_WRITE | VM_MAYWRITE))
+			write = 1;
+
+		for (pg_i = 0; pg_i < num_usr_pgs; pg_i++) {
+			pg_num = get_user_pages(curr_task, mm, ul_mpu_addr, 1,
+						write, 1, &mapped_page, NULL);
+			if (pg_num > 0) {
+				if (page_count(mapped_page) < 1) {
+					pr_err("Bad page count after doing"
+					       "get_user_pages on"
+					       "user buffer\n");
+					bad_page_dump(page_to_phys(mapped_page),
+						      mapped_page);
+				}
+				status = pte_set(dev_context->pt_attrs,
+						 page_to_phys(mapped_page), va,
+						 HW_PAGE_SIZE4KB, &hw_attrs);
+				if (status)
+					break;
+
+				if (mapped_pages)
+					mapped_pages[pg_i] = mapped_page;
+
+				va += HW_PAGE_SIZE4KB;
+				ul_mpu_addr += HW_PAGE_SIZE4KB;
+			} else {
+				pr_err("DSPBRIDGE: get_user_pages FAILED,"
+				       "MPU addr = 0x%x,"
+				       "vma->vm_flags = 0x%lx,"
+				       "get_user_pages Err"
+				       "Value = %d, Buffer"
+				       "size=0x%x\n", ul_mpu_addr,
+				       vma->vm_flags, pg_num, ul_num_bytes);
+				status = -EPERM;
+				break;
+			}
+		}
+	}
 	up_read(&mm->mmap_sem);
-
-	if (i < 0)
-		return i;
-
-	if (i < pages) {
-		res = -EFAULT;
-		goto err_pages;
+func_cont:
+	if (status) {
+		/*
+		 * Roll out the mapped pages incase it failed in middle of
+		 * mapping
+		 */
+		if (pg_i) {
+			bridge_brd_mem_un_map(dev_context, virt_addr,
+					   (pg_i * PG_SIZE4K));
+		}
+		status = -EPERM;
 	}
-
-	sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
-	if (!sgt) {
-		res = -ENOMEM;
-		goto err_pages;
-	}
-
-	res = sg_alloc_table(sgt, pages, GFP_KERNEL);
-
-	if (res < 0)
-		goto err_sg;
-
-	for_each_sg(sgt->sgl, sg, sgt->nents, i)
-		sg_set_page(sg, usr_pgs[i], PAGE_SIZE, 0);
-
-	da = iommu_vmap(mmu, da, sgt, IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
-
-	if (!IS_ERR_VALUE(da))
-		return 0;
-	res = (int)da;
-
-	sg_free_table(sgt);
-err_sg:
-	kfree(sgt);
-	i = pages;
-err_pages:
-	while (i--)
-		put_page(usr_pgs[i]);
-	return res;
+	/*
+	 * In any case, flush the TLB
+	 * This is called from here instead from pte_update to avoid unnecessary
+	 * repetition while mapping non-contiguous physical regions of a virtual
+	 * region
+	 */
+	flush_all(dev_context);
+	dev_dbg(bridge, "%s status %x\n", __func__, status);
+	return status;
 }
 
 /*
@@ -1180,43 +1357,194 @@ err_pages:
  *      So, instead of looking up the PTE address for every 4K block,
  *      we clear consecutive PTEs until we unmap all the bytes
  */
-static int bridge_brd_mem_un_map(struct bridge_dev_context *dev_ctx, u32 da)
+static int bridge_brd_mem_un_map(struct bridge_dev_context *dev_ctxt,
+				     u32 virt_addr, u32 ul_num_bytes)
 {
-	unsigned i;
-	struct sg_table *sgt;
-	struct scatterlist *sg;
+	u32 l1_base_va;
+	u32 l2_base_va;
+	u32 l2_base_pa;
+	u32 l2_page_num;
+	u32 pte_val;
+	u32 pte_size;
+	u32 pte_count;
+	u32 pte_addr_l1;
+	u32 pte_addr_l2 = 0;
+	u32 rem_bytes;
+	u32 rem_bytes_l2;
+	u32 va_curr;
+	struct page *pg = NULL;
+	int status = 0;
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	struct pg_table_attrs *pt = dev_context->pt_attrs;
+	u32 temp;
+	u32 paddr;
+	u32 numof4k_pages = 0;
 
-	sgt = iommu_vunmap(dev_ctx->dsp_mmu, da);
-	if (!sgt)
-		return -EFAULT;
+	va_curr = virt_addr;
+	rem_bytes = ul_num_bytes;
+	rem_bytes_l2 = 0;
+	l1_base_va = pt->l1_base_va;
+	pte_addr_l1 = hw_mmu_pte_addr_l1(l1_base_va, va_curr);
+	dev_dbg(bridge, "%s dev_ctxt %p, va %x, NumBytes %x l1_base_va %x, "
+		"pte_addr_l1 %x\n", __func__, dev_ctxt, virt_addr,
+		ul_num_bytes, l1_base_va, pte_addr_l1);
 
-	for_each_sg(sgt->sgl, sg, sgt->nents, i)
-		put_page(sg_page(sg));
-	sg_free_table(sgt);
-	kfree(sgt);
+	while (rem_bytes && !status) {
+		u32 va_curr_orig = va_curr;
+		/* Find whether the L1 PTE points to a valid L2 PT */
+		pte_addr_l1 = hw_mmu_pte_addr_l1(l1_base_va, va_curr);
+		pte_val = *(u32 *) pte_addr_l1;
+		pte_size = hw_mmu_pte_size_l1(pte_val);
 
-	return 0;
-}
+		if (pte_size != HW_MMU_COARSE_PAGE_SIZE)
+			goto skip_coarse_page;
 
+		/*
+		 * Get the L2 PA from the L1 PTE, and find
+		 * corresponding L2 VA
+		 */
+		l2_base_pa = hw_mmu_pte_coarse_l1(pte_val);
+		l2_base_va = l2_base_pa - pt->l2_base_pa + pt->l2_base_va;
+		l2_page_num =
+		    (l2_base_pa - pt->l2_base_pa) / HW_MMU_COARSE_PAGE_SIZE;
+		/*
+		 * Find the L2 PTE address from which we will start
+		 * clearing, the number of PTEs to be cleared on this
+		 * page, and the size of VA space that needs to be
+		 * cleared on this L2 page
+		 */
+		pte_addr_l2 = hw_mmu_pte_addr_l2(l2_base_va, va_curr);
+		pte_count = pte_addr_l2 & (HW_MMU_COARSE_PAGE_SIZE - 1);
+		pte_count = (HW_MMU_COARSE_PAGE_SIZE - pte_count) / sizeof(u32);
+		if (rem_bytes < (pte_count * PG_SIZE4K))
+			pte_count = rem_bytes / PG_SIZE4K;
+		rem_bytes_l2 = pte_count * PG_SIZE4K;
 
-static int get_io_pages(struct mm_struct *mm, u32 uva, unsigned pages,
-						struct page **usr_pgs)
-{
-	u32 pa;
-	int i;
-	struct page *pg;
+		/*
+		 * Unmap the VA space on this L2 PT. A quicker way
+		 * would be to clear pte_count entries starting from
+		 * pte_addr_l2. However, below code checks that we don't
+		 * clear invalid entries or less than 64KB for a 64KB
+		 * entry. Similar checking is done for L1 PTEs too
+		 * below
+		 */
+		while (rem_bytes_l2 && !status) {
+			pte_val = *(u32 *) pte_addr_l2;
+			pte_size = hw_mmu_pte_size_l2(pte_val);
+			/* va_curr aligned to pte_size? */
+			if (pte_size == 0 || rem_bytes_l2 < pte_size ||
+			    va_curr & (pte_size - 1)) {
+				status = -EPERM;
+				break;
+			}
 
-	for (i = 0; i < pages; i++) {
-		pa = user_va2_pa(mm, uva);
+			/* Collect Physical addresses from VA */
+			paddr = (pte_val & ~(pte_size - 1));
+			if (pte_size == HW_PAGE_SIZE64KB)
+				numof4k_pages = 16;
+			else
+				numof4k_pages = 1;
+			temp = 0;
+			while (temp++ < numof4k_pages) {
+				if (!pfn_valid(__phys_to_pfn(paddr))) {
+					paddr += HW_PAGE_SIZE4KB;
+					continue;
+				}
+				pg = PHYS_TO_PAGE(paddr);
+				if (page_count(pg) < 1) {
+					pr_info("DSPBRIDGE: UNMAP function: "
+						"COUNT 0 FOR PA 0x%x, size = "
+						"0x%x\n", paddr, ul_num_bytes);
+					bad_page_dump(paddr, pg);
+				} else {
+					set_page_dirty(pg);
+					page_cache_release(pg);
+				}
+				paddr += HW_PAGE_SIZE4KB;
+			}
+			if (hw_mmu_pte_clear(pte_addr_l2, va_curr, pte_size)) {
+				status = -EPERM;
+				goto EXIT_LOOP;
+			}
 
-		if (!pfn_valid(__phys_to_pfn(pa)))
+			status = 0;
+			rem_bytes_l2 -= pte_size;
+			va_curr += pte_size;
+			pte_addr_l2 += (pte_size >> 12) * sizeof(u32);
+		}
+		spin_lock(&pt->pg_lock);
+		if (rem_bytes_l2 == 0) {
+			pt->pg_info[l2_page_num].num_entries -= pte_count;
+			if (pt->pg_info[l2_page_num].num_entries == 0) {
+				/*
+				 * Clear the L1 PTE pointing to the L2 PT
+				 */
+				if (!hw_mmu_pte_clear(l1_base_va, va_curr_orig,
+						     HW_MMU_COARSE_PAGE_SIZE))
+					status = 0;
+				else {
+					status = -EPERM;
+					spin_unlock(&pt->pg_lock);
+					goto EXIT_LOOP;
+				}
+			}
+			rem_bytes -= pte_count * PG_SIZE4K;
+		} else
+			status = -EPERM;
+
+		spin_unlock(&pt->pg_lock);
+		continue;
+skip_coarse_page:
+		/* va_curr aligned to pte_size? */
+		/* pte_size = 1 MB or 16 MB */
+		if (pte_size == 0 || rem_bytes < pte_size ||
+		    va_curr & (pte_size - 1)) {
+			status = -EPERM;
 			break;
+		}
 
-		pg = PHYS_TO_PAGE(pa);
-		usr_pgs[i] = pg;
-		get_page(pg);
+		if (pte_size == HW_PAGE_SIZE1MB)
+			numof4k_pages = 256;
+		else
+			numof4k_pages = 4096;
+		temp = 0;
+		/* Collect Physical addresses from VA */
+		paddr = (pte_val & ~(pte_size - 1));
+		while (temp++ < numof4k_pages) {
+			if (pfn_valid(__phys_to_pfn(paddr))) {
+				pg = PHYS_TO_PAGE(paddr);
+				if (page_count(pg) < 1) {
+					pr_info("DSPBRIDGE: UNMAP function: "
+						"COUNT 0 FOR PA 0x%x, size = "
+						"0x%x\n", paddr, ul_num_bytes);
+					bad_page_dump(paddr, pg);
+				} else {
+					set_page_dirty(pg);
+					page_cache_release(pg);
+				}
+			}
+			paddr += HW_PAGE_SIZE4KB;
+		}
+		if (!hw_mmu_pte_clear(l1_base_va, va_curr, pte_size)) {
+			status = 0;
+			rem_bytes -= pte_size;
+			va_curr += pte_size;
+		} else {
+			status = -EPERM;
+			goto EXIT_LOOP;
+		}
 	}
-	return i;
+	/*
+	 * It is better to flush the TLB here, so that any stale old entries
+	 * get flushed
+	 */
+EXIT_LOOP:
+	flush_all(dev_context);
+	dev_dbg(bridge,
+		"%s: va_curr %x, pte_addr_l1 %x pte_addr_l2 %x rem_bytes %x,"
+		" rem_bytes_l2 %x status %x\n", __func__, va_curr, pte_addr_l1,
+		pte_addr_l2, rem_bytes, rem_bytes_l2, status);
+	return status;
 }
 
 /*
diff --git a/drivers/staging/tidspbridge/core/ue_deh.c b/drivers/staging/tidspbridge/core/ue_deh.c
index 14f319134357..3430418190da 100644
--- a/drivers/staging/tidspbridge/core/ue_deh.c
+++ b/drivers/staging/tidspbridge/core/ue_deh.c
@@ -115,6 +115,12 @@ int bridge_deh_create(struct deh_mgr **ret_deh,
 	/* Fill in context structure */
 	deh->hbridge_context = hbridge_context;
 
+	/* Install ISR function for DSP MMU fault */
+	status = request_irq(INT_DSP_MMU_IRQ, mmu_fault_isr, 0,
+			"DspBridge\tiommu fault", deh);
+	if (status < 0)
+		goto err;
+
 	*ret_deh = deh;
 	return 0;
 
@@ -134,6 +140,8 @@ int bridge_deh_destroy(struct deh_mgr *deh)
 		ntfy_delete(deh->ntfy_obj);
 		kfree(deh->ntfy_obj);
 	}
+	/* Disable DSP MMU fault */
+	free_irq(INT_DSP_MMU_IRQ, deh);
 
 	/* Free DPC object */
 	tasklet_kill(&deh->dpc_tasklet);
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h b/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
index 173dfbb42019..0ae7d1646a1b 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
@@ -201,7 +201,7 @@ typedef int(*fxn_brd_memmap) (struct bridge_dev_context
  */
 typedef int(*fxn_brd_memunmap) (struct bridge_dev_context
 				       * dev_ctxt,
-				       u32 da);
+				       u32 virt_addr, u32 ul_num_bytes);
 
 /*
  *  ======== bridge_brd_stop ========
diff --git a/drivers/staging/tidspbridge/rmgr/proc.c b/drivers/staging/tidspbridge/rmgr/proc.c
index 97c5b61f1014..b47d7aa747b1 100644
--- a/drivers/staging/tidspbridge/rmgr/proc.c
+++ b/drivers/staging/tidspbridge/rmgr/proc.c
@@ -1723,7 +1723,7 @@ int proc_un_map(void *hprocessor, void *map_addr,
 	/* Remove mapping from the page tables. */
 	if (!status) {
 		status = (*p_proc_object->intf_fxns->pfn_brd_mem_un_map)
-		    (p_proc_object->hbridge_context, va_align);
+		    (p_proc_object->hbridge_context, va_align, size_align);
 	}
 
 	mutex_unlock(&proc_lock);

From d08a5ace18dce9b18d8eb56bb6c0feef082b1b33 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Thu, 11 Nov 2010 01:50:53 +0100
Subject: [PATCH 0449/1066] PM: Allow devices to be removed during late suspend
 and early resume

Holding dpm_list_mtx across late suspend and early resume of devices
is problematic for the PCMCIA subsystem and doesn't allow device
objects to be removed by late suspend and early resume driver
callbacks.  This appears to be overly restrictive, as drivers are
generally allowed to remove device objects in other phases of suspend
and resume.  Therefore rework dpm_{suspend|resume}_noirq() so that
they don't have to hold dpm_list_mtx all the time.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 drivers/base/power/main.c | 34 ++++++++++++++++++++++++++++++----
 1 file changed, 30 insertions(+), 4 deletions(-)

diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 31b526661ec4..ead3e79d6fcf 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -475,20 +475,33 @@ End:
  */
 void dpm_resume_noirq(pm_message_t state)
 {
-	struct device *dev;
+	struct list_head list;
 	ktime_t starttime = ktime_get();
 
+	INIT_LIST_HEAD(&list);
 	mutex_lock(&dpm_list_mtx);
 	transition_started = false;
-	list_for_each_entry(dev, &dpm_list, power.entry)
+	while (!list_empty(&dpm_list)) {
+		struct device *dev = to_device(dpm_list.next);
+
+		get_device(dev);
 		if (dev->power.status > DPM_OFF) {
 			int error;
 
 			dev->power.status = DPM_OFF;
+			mutex_unlock(&dpm_list_mtx);
+
 			error = device_resume_noirq(dev, state);
+
+			mutex_lock(&dpm_list_mtx);
 			if (error)
 				pm_dev_err(dev, state, " early", error);
 		}
+		if (!list_empty(&dev->power.entry))
+			list_move_tail(&dev->power.entry, &list);
+		put_device(dev);
+	}
+	list_splice(&list, &dpm_list);
 	mutex_unlock(&dpm_list_mtx);
 	dpm_show_time(starttime, state, "early");
 	resume_device_irqs();
@@ -789,20 +802,33 @@ End:
  */
 int dpm_suspend_noirq(pm_message_t state)
 {
-	struct device *dev;
+	struct list_head list;
 	ktime_t starttime = ktime_get();
 	int error = 0;
 
+	INIT_LIST_HEAD(&list);
 	suspend_device_irqs();
 	mutex_lock(&dpm_list_mtx);
-	list_for_each_entry_reverse(dev, &dpm_list, power.entry) {
+	while (!list_empty(&dpm_list)) {
+		struct device *dev = to_device(dpm_list.prev);
+
+		get_device(dev);
+		mutex_unlock(&dpm_list_mtx);
+
 		error = device_suspend_noirq(dev, state);
+
+		mutex_lock(&dpm_list_mtx);
 		if (error) {
 			pm_dev_err(dev, state, " late", error);
+			put_device(dev);
 			break;
 		}
 		dev->power.status = DPM_OFF_IRQ;
+		if (!list_empty(&dev->power.entry))
+			list_move(&dev->power.entry, &list);
+		put_device(dev);
 	}
+	list_splice_tail(&list, &dpm_list);
 	mutex_unlock(&dpm_list_mtx);
 	if (error)
 		dpm_resume_noirq(resume_event(state));

From 43e60861fe9d39740cf5b355f58fecedf0d8e9ba Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 11 Nov 2010 01:51:26 +0100
Subject: [PATCH 0450/1066] PM / OPP: Hide OPP configuration when SoCs do not
 provide an implementation

Since the OPP API is only useful with an appropraite SoC-specific
implementation there is no point in offering the ability to enable
the API on general systems. Provide an ARCH_HAS OPP Kconfig symbol
which masks out the option unless selected by an implementation.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 Documentation/power/opp.txt | 3 +++
 kernel/power/Kconfig        | 4 ++++
 2 files changed, 7 insertions(+)

diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt
index 44d87ad3cea9..cd445582d1f8 100644
--- a/Documentation/power/opp.txt
+++ b/Documentation/power/opp.txt
@@ -37,6 +37,9 @@ Typical usage of the OPP library is as follows:
 SoC framework	-> modifies on required cases certain OPPs	-> OPP layer
 		-> queries to search/retrieve information	->
 
+Architectures that provide a SoC framework for OPP should select ARCH_HAS_OPP
+to make the OPP layer available.
+
 OPP layer expects each domain to be represented by a unique device pointer. SoC
 framework registers a set of initial OPPs per device with the OPP layer. This
 list is expected to be an optimally small number typically around 5 per device.
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 29bff6117abc..a5aff3ebad38 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -246,9 +246,13 @@ config PM_OPS
 	depends on PM_SLEEP || PM_RUNTIME
 	default y
 
+config ARCH_HAS_OPP
+	bool
+
 config PM_OPP
 	bool "Operating Performance Point (OPP) Layer library"
 	depends on PM
+	depends on ARCH_HAS_OPP
 	---help---
 	  SOCs have a standard set of tuples consisting of frequency and
 	  voltage pairs that the device will support per voltage domain. This

From f724bd240adef304e222590826cb0c17d6168b68 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 4 Nov 2010 20:08:12 -0700
Subject: [PATCH 0451/1066] sound/oss/dev_table.c: Use vzalloc

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/oss/dev_table.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/sound/oss/dev_table.c b/sound/oss/dev_table.c
index 727bdb9ba2dc..d8cf3e58dc76 100644
--- a/sound/oss/dev_table.c
+++ b/sound/oss/dev_table.c
@@ -71,7 +71,7 @@ int sound_install_audiodrv(int vers, char *name, struct audio_driver *driver,
 	if (sound_nblocks >= MAX_MEM_BLOCKS)
 		sound_nblocks = MAX_MEM_BLOCKS - 1;
 
-	op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct audio_operations)));
+	op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vzalloc(sizeof(struct audio_operations)));
 	sound_nblocks++;
 	if (sound_nblocks >= MAX_MEM_BLOCKS)
 		sound_nblocks = MAX_MEM_BLOCKS - 1;
@@ -81,7 +81,6 @@ int sound_install_audiodrv(int vers, char *name, struct audio_driver *driver,
 		sound_unload_audiodev(num);
 		return -(ENOMEM);
 	}
-	memset((char *) op, 0, sizeof(struct audio_operations));
 	init_waitqueue_head(&op->in_sleeper);
 	init_waitqueue_head(&op->out_sleeper);	
 	init_waitqueue_head(&op->poll_sleeper);
@@ -128,7 +127,7 @@ int sound_install_mixer(int vers, char *name, struct mixer_operations *driver,
 	/* FIXME: This leaks a mixer_operations struct every time its called
 	   until you unload sound! */
 	   
-	op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct mixer_operations)));
+	op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vzalloc(sizeof(struct mixer_operations)));
 	sound_nblocks++;
 	if (sound_nblocks >= MAX_MEM_BLOCKS)
 		sound_nblocks = MAX_MEM_BLOCKS - 1;
@@ -137,7 +136,6 @@ int sound_install_mixer(int vers, char *name, struct mixer_operations *driver,
 		printk(KERN_ERR "Sound: Can't allocate mixer driver for (%s)\n", name);
 		return -ENOMEM;
 	}
-	memset((char *) op, 0, sizeof(struct mixer_operations));
 	memcpy((char *) op, (char *) driver, driver_size);
 
 	strlcpy(op->name, name, sizeof(op->name));

From ea7dd251251a8d4694e9929104209dcc06220630 Mon Sep 17 00:00:00 2001
From: Jesper Juhl <jj@chaosbits.net>
Date: Tue, 9 Nov 2010 00:11:03 +0100
Subject: [PATCH 0452/1066] sound/oss: Remove unnecessary casts of void ptr

The [vk][cmz]alloc(_node) family of functions return void pointers which
it's completely unnecessary/pointless to cast to other pointer types since
that happens implicitly.

This patch removes such casts from sound/oss/

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/oss/midibuf.c   | 4 ++--
 sound/oss/pss.c       | 6 +++---
 sound/oss/sequencer.c | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/sound/oss/midibuf.c b/sound/oss/midibuf.c
index 782b3b84dac6..ceedb1eff203 100644
--- a/sound/oss/midibuf.c
+++ b/sound/oss/midibuf.c
@@ -178,7 +178,7 @@ int MIDIbuf_open(int dev, struct file *file)
 		return err;
 
 	parms[dev].prech_timeout = MAX_SCHEDULE_TIMEOUT;
-	midi_in_buf[dev] = (struct midi_buf *) vmalloc(sizeof(struct midi_buf));
+	midi_in_buf[dev] = vmalloc(sizeof(struct midi_buf));
 
 	if (midi_in_buf[dev] == NULL)
 	{
@@ -188,7 +188,7 @@ int MIDIbuf_open(int dev, struct file *file)
 	}
 	midi_in_buf[dev]->len = midi_in_buf[dev]->head = midi_in_buf[dev]->tail = 0;
 
-	midi_out_buf[dev] = (struct midi_buf *) vmalloc(sizeof(struct midi_buf));
+	midi_out_buf[dev] = vmalloc(sizeof(struct midi_buf));
 
 	if (midi_out_buf[dev] == NULL)
 	{
diff --git a/sound/oss/pss.c b/sound/oss/pss.c
index e19dd5dcc2de..9b800ce5100e 100644
--- a/sound/oss/pss.c
+++ b/sound/oss/pss.c
@@ -859,7 +859,7 @@ static int pss_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg,
 			return 0;
 
 		case SNDCTL_COPR_LOAD:
-			buf = (copr_buffer *) vmalloc(sizeof(copr_buffer));
+			buf = vmalloc(sizeof(copr_buffer));
 			if (buf == NULL)
 				return -ENOSPC;
 			if (copy_from_user(buf, arg, sizeof(copr_buffer))) {
@@ -871,7 +871,7 @@ static int pss_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg,
 			return err;
 		
 		case SNDCTL_COPR_SENDMSG:
-			mbuf = (copr_msg *)vmalloc(sizeof(copr_msg));
+			mbuf = vmalloc(sizeof(copr_msg));
 			if (mbuf == NULL)
 				return -ENOSPC;
 			if (copy_from_user(mbuf, arg, sizeof(copr_msg))) {
@@ -895,7 +895,7 @@ static int pss_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg,
 
 		case SNDCTL_COPR_RCVMSG:
 			err = 0;
-			mbuf = (copr_msg *)vmalloc(sizeof(copr_msg));
+			mbuf = vmalloc(sizeof(copr_msg));
 			if (mbuf == NULL)
 				return -ENOSPC;
 			data = (unsigned short *)mbuf->data;
diff --git a/sound/oss/sequencer.c b/sound/oss/sequencer.c
index e85789e53816..5ea1098ac427 100644
--- a/sound/oss/sequencer.c
+++ b/sound/oss/sequencer.c
@@ -1646,13 +1646,13 @@ void sequencer_init(void)
 {
 	if (sequencer_ok)
 		return;
-	queue = (unsigned char *)vmalloc(SEQ_MAX_QUEUE * EV_SZ);
+	queue = vmalloc(SEQ_MAX_QUEUE * EV_SZ);
 	if (queue == NULL)
 	{
 		printk(KERN_ERR "sequencer: Can't allocate memory for sequencer output queue\n");
 		return;
 	}
-	iqueue = (unsigned char *)vmalloc(SEQ_MAX_QUEUE * IEV_SZ);
+	iqueue = vmalloc(SEQ_MAX_QUEUE * IEV_SZ);
 	if (iqueue == NULL)
 	{
 		printk(KERN_ERR "sequencer: Can't allocate memory for sequencer input queue\n");

From 89feca1a16b05651d9c500e5572c0d6882873396 Mon Sep 17 00:00:00 2001
From: David Henningsson <david.henningsson@canonical.com>
Date: Wed, 13 Oct 2010 15:48:24 +0200
Subject: [PATCH 0453/1066] ALSA: HDA: Enable digital mic on IDT 92HD87B

BugLink: http://launchpad.net/bugs/673075

According to the datasheet of 92HD87B, there is a digital mic
at nid 0x11, so enable it in order to be able to use the mic.

Cc: stable@kernel.org
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_sigmatel.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 93fa59cc60ef..cfd73afad882 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -389,6 +389,11 @@ static hda_nid_t stac92hd83xxx_dmic_nids[STAC92HD83XXX_NUM_DMICS + 1] = {
 	0x11, 0x20, 0
 };
 
+#define STAC92HD87B_NUM_DMICS	 1
+static hda_nid_t stac92hd87b_dmic_nids[STAC92HD87B_NUM_DMICS + 1] = {
+	0x11, 0
+};
+
 #define STAC92HD83XXX_NUM_CAPS	2
 static unsigned long stac92hd83xxx_capvols[] = {
 	HDA_COMPOSE_AMP_VAL(0x17, 3, 0, HDA_OUTPUT),
@@ -5452,12 +5457,17 @@ again:
 				stac92hd83xxx_brd_tbl[spec->board_config]);
 
 	switch (codec->vendor_id) {
+	case 0x111d76d1:
+	case 0x111d76d9:
+		spec->dmic_nids = stac92hd87b_dmic_nids;
+		spec->num_dmics = stac92xx_connected_ports(codec,
+				stac92hd87b_dmic_nids,
+				STAC92HD87B_NUM_DMICS);
+		/* Fall through */
 	case 0x111d7666:
 	case 0x111d7667:
 	case 0x111d7668:
 	case 0x111d7669:
-	case 0x111d76d1:
-	case 0x111d76d9:
 		spec->num_pins = ARRAY_SIZE(stac92hd88xxx_pin_nids);
 		spec->pin_nids = stac92hd88xxx_pin_nids;
 		spec->mono_nid = 0;

From e9161512017f11050ef2b826cbb10be1673554c6 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Tue, 9 Nov 2010 18:29:08 +0100
Subject: [PATCH 0454/1066] ALSA: sound/mixart: avoid redefining
 {readl,write}_{le,be} accessors

If the platform already provides a definition for these accessors
do not redefine them. The warning was caught on MIPS.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/mixart/mixart_hwdep.h | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/sound/pci/mixart/mixart_hwdep.h b/sound/pci/mixart/mixart_hwdep.h
index a46f5083db99..812e288ef2e7 100644
--- a/sound/pci/mixart/mixart_hwdep.h
+++ b/sound/pci/mixart/mixart_hwdep.h
@@ -25,11 +25,21 @@
 
 #include <sound/hwdep.h>
 
+#ifndef readl_be
 #define readl_be(x) be32_to_cpu(__raw_readl(x))
-#define writel_be(data,addr) __raw_writel(cpu_to_be32(data),addr)
+#endif
 
+#ifndef writel_be
+#define writel_be(data,addr) __raw_writel(cpu_to_be32(data),addr)
+#endif
+
+#ifndef readl_le
 #define readl_le(x) le32_to_cpu(__raw_readl(x))
+#endif
+
+#ifndef writel_le
 #define writel_le(data,addr) __raw_writel(cpu_to_le32(data),addr)
+#endif
 
 #define MIXART_MEM(mgr,x)	((mgr)->mem[0].virt + (x))
 #define MIXART_REG(mgr,x)	((mgr)->mem[1].virt + (x))

From fa2b30af84e84129b8d4cf955890ad167cc20cf0 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Tue, 9 Nov 2010 23:00:41 +0100
Subject: [PATCH 0455/1066] ALSA: sound/pci/ctxfi/ctpcm.c: Remove potential for
 use after free

In each function, the value apcm is stored in the private_data field of
runtime.  At the same time the function ct_atc_pcm_free_substream is stored
in the private_free field of the same structure.  ct_atc_pcm_free_substream
dereferences and ultimately frees the value in the private_data field.  But
each function can exit in an error case with apcm having been freed, in
which case a subsequent call to the private_free function would perform a
dereference after free.  On the other hand, if the private_free field is
not initialized, it is NULL, and not invoked (see snd_pcm_detach_substream
in sound/core/pcm.c).  To avoid the introduction of a dangling pointer, the
initializations of the private_data and private_free fields are moved to
the end of the function, past any possible free of apcm.  This is safe
because the previous calls to snd_pcm_hw_constraint_integer and
snd_pcm_hw_constraint_minmax, which take runtime as an argument, do not
refer to either of these fields.

In each function, there is one error case where apcm needs to be freed, and
a call to kfree is added.

The sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e,e1,e2,e3;
identifier f,free1,free2;
expression a;
@@

*e->f = a
... when != e->f = e1
    when any
if (...) {
  ... when != free1(...,e,...)
      when != e->f = e2
* kfree(a)
  ... when != free2(...,e,...)
      when != e->f = e3
}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/ctxfi/ctpcm.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/sound/pci/ctxfi/ctpcm.c b/sound/pci/ctxfi/ctpcm.c
index 85ab43e89212..457d21189b0d 100644
--- a/sound/pci/ctxfi/ctpcm.c
+++ b/sound/pci/ctxfi/ctpcm.c
@@ -129,8 +129,6 @@ static int ct_pcm_playback_open(struct snd_pcm_substream *substream)
 
 	apcm->substream = substream;
 	apcm->interrupt = ct_atc_pcm_interrupt;
-	runtime->private_data = apcm;
-	runtime->private_free = ct_atc_pcm_free_substream;
 	if (IEC958 == substream->pcm->device) {
 		runtime->hw = ct_spdif_passthru_playback_hw;
 		atc->spdif_out_passthru(atc, 1);
@@ -155,8 +153,12 @@ static int ct_pcm_playback_open(struct snd_pcm_substream *substream)
 	}
 
 	apcm->timer = ct_timer_instance_new(atc->timer, apcm);
-	if (!apcm->timer)
+	if (!apcm->timer) {
+		kfree(apcm);
 		return -ENOMEM;
+	}
+	runtime->private_data = apcm;
+	runtime->private_free = ct_atc_pcm_free_substream;
 
 	return 0;
 }
@@ -278,8 +280,6 @@ static int ct_pcm_capture_open(struct snd_pcm_substream *substream)
 	apcm->started = 0;
 	apcm->substream = substream;
 	apcm->interrupt = ct_atc_pcm_interrupt;
-	runtime->private_data = apcm;
-	runtime->private_free = ct_atc_pcm_free_substream;
 	runtime->hw = ct_pcm_capture_hw;
 	runtime->hw.rate_max = atc->rsr * atc->msr;
 
@@ -298,8 +298,12 @@ static int ct_pcm_capture_open(struct snd_pcm_substream *substream)
 	}
 
 	apcm->timer = ct_timer_instance_new(atc->timer, apcm);
-	if (!apcm->timer)
+	if (!apcm->timer) {
+		kfree(apcm);
 		return -ENOMEM;
+	}
+	runtime->private_data = apcm;
+	runtime->private_free = ct_atc_pcm_free_substream;
 
 	return 0;
 }

From e2e9566230e0c93d89948cbc799a191d35383d09 Mon Sep 17 00:00:00 2001
From: Peter Rosin <peda@lysator.liu.se>
Date: Wed, 10 Nov 2010 15:55:05 +0100
Subject: [PATCH 0456/1066] ALSA: AT73C213: Rectify misleading comment.

The Atmel SSC can divide by even numbers, not only powers of two.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/spi/at73c213.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
index 1bc56b2b94e2..337a00241a1f 100644
--- a/sound/spi/at73c213.c
+++ b/sound/spi/at73c213.c
@@ -155,7 +155,7 @@ static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip)
 	if (max_tries < 1)
 		max_tries = 1;
 
-	/* ssc_div must be a power of 2. */
+	/* ssc_div must be even. */
 	ssc_div = (ssc_div + 1) & ~1UL;
 
 	if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {

From 6903591f314b8947d0e362bda7715e90eb9df75e Mon Sep 17 00:00:00 2001
From: Ian Campbell <ian.campbell@citrix.com>
Date: Mon, 1 Nov 2010 16:30:09 +0000
Subject: [PATCH 0457/1066] xen: events: do not unmask event channels on resume

The IRQ core code will take care of disabling and reenabling
interrupts over suspend resume automatically, therefore we do not need
to do this in the Xen event channel code.

The only exception is those event channels marked IRQF_NO_SUSPEND
which the IRQ core ignores. We must unmask these ourselves, taking
care to obey the current IRQ_DISABLED status. Failure check for
IRQ_DISABLED leads to enabling polled only event channels, such as
that associated with the pv spinlocks, which must never be enabled:

[   21.970432] ------------[ cut here ]------------
[   21.970432] kernel BUG at arch/x86/xen/spinlock.c:343!
[   21.970432] invalid opcode: 0000 [#1] SMP
[   21.970432] last sysfs file: /sys/devices/virtual/net/lo/operstate
[   21.970432] Modules linked in:
[   21.970432]
[   21.970432] Pid: 0, comm: swapper Not tainted (2.6.32.24-x86_32p-xen-01034-g787c727 #34)
[   21.970432] EIP: 0061:[<c102e209>] EFLAGS: 00010046 CPU: 3
[   21.970432] EIP is at dummy_handler+0x3/0x7
[   21.970432] EAX: 0000021c EBX: dfc16880 ECX: 0000001a EDX: 00000000
[   21.970432] ESI: dfc02c00 EDI: 00000001 EBP: dfc47e10 ESP: dfc47e10
[   21.970432]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
[   21.970432] Process swapper (pid: 0, ti=dfc46000 task=dfc39440 task.ti=dfc46000)
[   21.970432] Stack:
[   21.970432]  dfc47e30 c10a39f0 0000021c 00000000 00000000 dfc16880 0000021c 00000001
[   21.970432] <0> dfc47e40 c10a4f08 0000021c 00000000 dfc47e78 c12240a7 c1839284 c1839284
[   21.970432] <0> 00000200 00000000 00000000 f5720000 c1f3d028 c1f3d02c 00000180 dfc47e90
[   21.970432] Call Trace:
[   21.970432]  [<c10a39f0>] ? handle_IRQ_event+0x5f/0x122
[   21.970432]  [<c10a4f08>] ? handle_percpu_irq+0x2f/0x55
[   21.970432]  [<c12240a7>] ? __xen_evtchn_do_upcall+0xdb/0x15f
[   21.970432]  [<c122481e>] ? xen_evtchn_do_upcall+0x20/0x30
[   21.970432]  [<c1030d47>] ? xen_do_upcall+0x7/0xc
[   21.970432]  [<c102007b>] ? apic_reg_read+0xd3/0x22d
[   21.970432]  [<c1002227>] ? hypercall_page+0x227/0x1005
[   21.970432]  [<c102d30b>] ? xen_force_evtchn_callback+0xf/0x14
[   21.970432]  [<c102da7c>] ? check_events+0x8/0xc
[   21.970432]  [<c102da3b>] ? xen_irq_enable_direct_end+0x0/0x1
[   21.970432]  [<c105e485>] ? finish_task_switch+0x62/0xba
[   21.970432]  [<c14e3f84>] ? schedule+0x808/0x89d
[   21.970432]  [<c1084dc5>] ? hrtimer_start_expires+0x1a/0x22
[   21.970432]  [<c1085154>] ? tick_nohz_restart_sched_tick+0x15a/0x162
[   21.970432]  [<c102f43a>] ? cpu_idle+0x6d/0x6f
[   21.970432]  [<c14db29e>] ? cpu_bringup_and_idle+0xd/0xf
[   21.970432] Code: 5d 0f 95 c0 0f b6 c0 c3 55 66 83 78 02 00 89 e5 5d 0f 95 \
c0 0f b6 c0 c3 55 b2 01 86 10 31 c0 84 d2 89 e5 0f 94 c0 5d c3 55 89 e5 <0f> 0b \
eb fe 55 80 3d 4c ce 84 c1 00 89 e5 57 56 89 c6 53 74 15
[   21.970432] EIP: [<c102e209>] dummy_handler+0x3/0x7 SS:ESP 0069:dfc47e10
[   21.970432] ---[ end trace c0b71f7e12cf3011 ]---

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/events.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 97612f548a8e..321a0c8346e5 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -1299,9 +1299,6 @@ static void restore_cpu_virqs(unsigned int cpu)
 		evtchn_to_irq[evtchn] = irq;
 		irq_info[irq] = mk_virq_info(evtchn, virq);
 		bind_evtchn_to_cpu(evtchn, cpu);
-
-		/* Ready for use. */
-		unmask_evtchn(evtchn);
 	}
 }
 
@@ -1327,10 +1324,6 @@ static void restore_cpu_ipis(unsigned int cpu)
 		evtchn_to_irq[evtchn] = irq;
 		irq_info[irq] = mk_ipi_info(evtchn, ipi);
 		bind_evtchn_to_cpu(evtchn, cpu);
-
-		/* Ready for use. */
-		unmask_evtchn(evtchn);
-
 	}
 }
 
@@ -1390,6 +1383,7 @@ void xen_poll_irq(int irq)
 void xen_irq_resume(void)
 {
 	unsigned int cpu, irq, evtchn;
+	struct irq_desc *desc;
 
 	init_evtchn_cpu_bindings();
 
@@ -1408,6 +1402,23 @@ void xen_irq_resume(void)
 		restore_cpu_virqs(cpu);
 		restore_cpu_ipis(cpu);
 	}
+
+	/*
+	 * Unmask any IRQF_NO_SUSPEND IRQs which are enabled. These
+	 * are not handled by the IRQ core.
+	 */
+	for_each_irq_desc(irq, desc) {
+		if (!desc->action || !(desc->action->flags & IRQF_NO_SUSPEND))
+			continue;
+		if (desc->status & IRQ_DISABLED)
+			continue;
+
+		evtchn = evtchn_from_irq(irq);
+		if (evtchn == -1)
+			continue;
+
+		unmask_evtchn(evtchn);
+	}
 }
 
 static struct irq_chip xen_dynamic_chip __read_mostly = {

From 9ec23a7f6d2537faf14368e066e307c06812c4ca Mon Sep 17 00:00:00 2001
From: Ian Campbell <ian.campbell@citrix.com>
Date: Thu, 28 Oct 2010 11:32:29 -0700
Subject: [PATCH 0458/1066] xen: do not release any memory under 1M in domain 0

We already deliberately setup a 1-1 P2M for the region up to 1M in
order to allow code which assumes this region is already mapped to
work without having to convert everything to ioremap.

Domain 0 should not return any apparently unused memory regions
(reserved or otherwise) in this region to Xen since the e820 may not
accurately reflect what the BIOS has stashed in this region.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/setup.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index b1dbdaa23ecc..769c4b01fa32 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -118,16 +118,18 @@ static unsigned long __init xen_return_unused_memory(unsigned long max_pfn,
 						     const struct e820map *e820)
 {
 	phys_addr_t max_addr = PFN_PHYS(max_pfn);
-	phys_addr_t last_end = 0;
+	phys_addr_t last_end = ISA_END_ADDRESS;
 	unsigned long released = 0;
 	int i;
 
+	/* Free any unused memory above the low 1Mbyte. */
 	for (i = 0; i < e820->nr_map && last_end < max_addr; i++) {
 		phys_addr_t end = e820->map[i].addr;
 		end = min(max_addr, end);
 
-		released += xen_release_chunk(last_end, end);
-		last_end = e820->map[i].addr + e820->map[i].size;
+		if (last_end < end)
+			released += xen_release_chunk(last_end, end);
+		last_end = max(last_end, e820->map[i].addr + e820->map[i].size);
 	}
 
 	if (last_end < max_addr)
@@ -164,6 +166,7 @@ char * __init xen_memory_setup(void)
 		XENMEM_memory_map;
 	rc = HYPERVISOR_memory_op(op, &memmap);
 	if (rc == -ENOSYS) {
+		BUG_ON(xen_initial_domain());
 		memmap.nr_entries = 1;
 		map[0].addr = 0ULL;
 		map[0].size = mem_end;
@@ -201,12 +204,13 @@ char * __init xen_memory_setup(void)
 	}
 
 	/*
-	 * Even though this is normal, usable memory under Xen, reserve
-	 * ISA memory anyway because too many things think they can poke
+	 * In domU, the ISA region is normal, usable memory, but we
+	 * reserve ISA memory anyway because too many things poke
 	 * about in there.
 	 *
-	 * In a dom0 kernel, this region is identity mapped with the
-	 * hardware ISA area, so it really is out of bounds.
+	 * In Dom0, the host E820 information can leave gaps in the
+	 * ISA range, which would cause us to release those pages.  To
+	 * avoid this, we unconditionally reserve them here.
 	 */
 	e820_add_region(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS,
 			E820_RESERVED);

From 13b9b6e746d753d43270a78dd39694912646b5d9 Mon Sep 17 00:00:00 2001
From: Steven Rostedt <srostedt@redhat.com>
Date: Wed, 10 Nov 2010 22:19:24 -0500
Subject: [PATCH 0459/1066] tracing: Fix module use of trace_bprintk()

On use of trace_printk() there's a macro that determines if the format
is static or a variable. If it is static, it defaults to __trace_bprintk()
otherwise it uses __trace_printk().

A while ago, Lai Jiangshan added __trace_bprintk(). In that patch, we
discussed a way to allow modules to use it. The difference between
__trace_bprintk() and __trace_printk() is that for faster processing,
just the format and args are stored in the trace instead of running
it through a sprintf function. In order to do this, the format used
by the __trace_bprintk() had to be persistent.

See commit 1ba28e02a18cbdbea123836f6c98efb09cbf59ec

The problem comes with trace_bprintk() where the module is unloaded.
The pointer left in the buffer is still pointing to the format.

To solve this issue, the formats in the module were copied into kernel
core. If the same format was used, they would use the same copy (to prevent
memory leak). This all worked well until we tried to merge everything.

At the time this was written, Lai Jiangshan, Frederic Weisbecker,
Ingo Molnar and myself were all touching the same code. When this was
merged, we lost the part of it that was in module.c. This kept out the
copying of the formats and unloading the module could cause bad pointers
left in the ring buffer.

This patch adds back (with updates required for current kernel) the
module code that sets up the necessary pointers.

Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 kernel/module.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/kernel/module.c b/kernel/module.c
index 437a74a7524a..d190664f25ff 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2326,6 +2326,18 @@ static void find_module_sections(struct module *mod, struct load_info *info)
 	kmemleak_scan_area(mod->trace_events, sizeof(*mod->trace_events) *
 			   mod->num_trace_events, GFP_KERNEL);
 #endif
+#ifdef CONFIG_TRACING
+	mod->trace_bprintk_fmt_start = section_objs(info, "__trace_printk_fmt",
+					 sizeof(*mod->trace_bprintk_fmt_start),
+					 &mod->num_trace_bprintk_fmt);
+	/*
+	 * This section contains pointers to allocated objects in the trace
+	 * code and not scanning it leads to false positives.
+	 */
+	kmemleak_scan_area(mod->trace_bprintk_fmt_start,
+			   sizeof(*mod->trace_bprintk_fmt_start) *
+			   mod->num_trace_bprintk_fmt, GFP_KERNEL);
+#endif
 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
 	/* sechdrs[0].sh_size is always zero */
 	mod->ftrace_callsites = section_objs(info, "__mcount_loc",

From b5908548537ccd3ada258ca5348df7ffc93e5a06 Mon Sep 17 00:00:00 2001
From: Steven Rostedt <srostedt@redhat.com>
Date: Wed, 10 Nov 2010 22:29:49 -0500
Subject: [PATCH 0460/1066] tracing: Force arch_local_irq_* notrace for
 paravirt

When running ktest.pl randconfig tests, I would sometimes trigger
a lockdep annotation bug (possible reason: unannotated irqs-on).

This triggering happened right after function tracer self test was
executed. After doing a config bisect I found that this was caused with
having function tracer, paravirt guest, prove locking, and rcu torture
all enabled.

The rcu torture just enhanced the likelyhood of triggering the bug.
Prove locking was needed, since it was the thing that was bugging.
Function tracer would trace and disable interrupts in all sorts
of funny places.
paravirt guest would turn arch_local_irq_* into functions that would
be traced.

Besides the fact that tracing arch_local_irq_* is just a bad idea,
this is what is happening.

The bug happened simply in the local_irq_restore() code:

		if (raw_irqs_disabled_flags(flags)) {	\
			raw_local_irq_restore(flags);	\
			trace_hardirqs_off();		\
		} else {				\
			trace_hardirqs_on();		\
			raw_local_irq_restore(flags);	\
		}					\

The raw_local_irq_restore() was defined as arch_local_irq_restore().

Now imagine, we are about to enable interrupts. We go into the else
case and call trace_hardirqs_on() which tells lockdep that we are enabling
interrupts, so it sets the current->hardirqs_enabled = 1.

Then we call raw_local_irq_restore() which calls arch_local_irq_restore()
which gets traced!

Now in the function tracer we disable interrupts with local_irq_save().
This is fine, but flags is stored that we have interrupts disabled.

When the function tracer calls local_irq_restore() it does it, but this
time with flags set as disabled, so we go into the if () path.
This keeps interrupts disabled and calls trace_hardirqs_off() which
sets current->hardirqs_enabled = 0.

When the tracer is finished and proceeds with the original code,
we enable interrupts but leave current->hardirqs_enabled as 0. Which
now breaks lockdeps internal processing.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 arch/x86/include/asm/paravirt.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 18e3b8a8709f..ef9975812c77 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -824,27 +824,27 @@ static __always_inline void arch_spin_unlock(struct arch_spinlock *lock)
 #define __PV_IS_CALLEE_SAVE(func)			\
 	((struct paravirt_callee_save) { func })
 
-static inline unsigned long arch_local_save_flags(void)
+static inline notrace unsigned long arch_local_save_flags(void)
 {
 	return PVOP_CALLEE0(unsigned long, pv_irq_ops.save_fl);
 }
 
-static inline void arch_local_irq_restore(unsigned long f)
+static inline notrace void arch_local_irq_restore(unsigned long f)
 {
 	PVOP_VCALLEE1(pv_irq_ops.restore_fl, f);
 }
 
-static inline void arch_local_irq_disable(void)
+static inline notrace void arch_local_irq_disable(void)
 {
 	PVOP_VCALLEE0(pv_irq_ops.irq_disable);
 }
 
-static inline void arch_local_irq_enable(void)
+static inline notrace void arch_local_irq_enable(void)
 {
 	PVOP_VCALLEE0(pv_irq_ops.irq_enable);
 }
 
-static inline unsigned long arch_local_irq_save(void)
+static inline notrace unsigned long arch_local_irq_save(void)
 {
 	unsigned long f;
 

From 7a1abd08d52fdeddb3e9a5a33f2f15cc6a5674d2 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 10 Nov 2010 21:35:37 -0800
Subject: [PATCH 0461/1066] tcp: Increase TCP_MAXSEG socket option minimum.

As noted by Steve Chen, since commit
f5fff5dc8a7a3f395b0525c02ba92c95d42b7390 ("tcp: advertise MSS
requested by user") we can end up with a situation where
tcp_select_initial_window() does a divide by a zero (or
even negative) mss value.

The problem is that sometimes we effectively subtract
TCPOLEN_TSTAMP_ALIGNED and/or TCPOLEN_MD5SIG_ALIGNED from the mss.

Fix this by increasing the minimum from 8 to 64.

Reported-by: Steve Chen <schen@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/tcp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 245603c4ad48..081419969485 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2246,7 +2246,7 @@ static int do_tcp_setsockopt(struct sock *sk, int level,
 		/* Values greater than interface MTU won't take effect. However
 		 * at the point when this call is done we typically don't yet
 		 * know which interface is going to be used */
-		if (val < 8 || val > MAX_TCP_WINDOW) {
+		if (val < 64 || val > MAX_TCP_WINDOW) {
 			err = -EINVAL;
 			break;
 		}

From a4503199f66dd13ddce1c1bb830fd414d9669f88 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 10 Nov 2010 23:05:07 -0800
Subject: [PATCH 0462/1066] Input: acecad - fix a memory leak in
 usb_acecad_probe error path

Add a missing usb_free_urb() in usb_acecad_probe() error path.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/tablet/acecad.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c
index aea9a9399a36..d94f7e9aa997 100644
--- a/drivers/input/tablet/acecad.c
+++ b/drivers/input/tablet/acecad.c
@@ -229,12 +229,13 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
 
 	err = input_register_device(acecad->input);
 	if (err)
-		goto fail2;
+		goto fail3;
 
 	usb_set_intfdata(intf, acecad);
 
 	return 0;
 
+ fail3:	usb_free_urb(acecad->irq);
  fail2:	usb_free_coherent(dev, 8, acecad->data, acecad->data_dma);
  fail1: input_free_device(input_dev);
 	kfree(acecad);

From 17d01f28e160f8a9c9ecda2e335d0047ec9e7388 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Wed, 10 Nov 2010 23:59:20 -0800
Subject: [PATCH 0463/1066] Input: pcf8574_keypad - fix error handling in
 pcf8574_kp_probe

It is not allowed to call input_free_device() after calling
input_unregister_device() because input devices are refcounted and
unregister will free the device if we were holding he last referenc.

The preferred style in input/ is to make input_register_device() the
last function in the probe which can fail.  That way we don't need to
call input_unregister_device().

Also do not need to call input_set_drvdata() as nothing in the driver
uses the data.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/misc/pcf8574_keypad.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)

diff --git a/drivers/input/misc/pcf8574_keypad.c b/drivers/input/misc/pcf8574_keypad.c
index 4b42ffc0532a..d1583aea1721 100644
--- a/drivers/input/misc/pcf8574_keypad.c
+++ b/drivers/input/misc/pcf8574_keypad.c
@@ -127,14 +127,6 @@ static int __devinit pcf8574_kp_probe(struct i2c_client *client, const struct i2
 	idev->id.product = 0x0001;
 	idev->id.version = 0x0100;
 
-	input_set_drvdata(idev, lp);
-
-	ret = input_register_device(idev);
-	if (ret) {
-		dev_err(&client->dev, "input_register_device() failed\n");
-		goto fail_register;
-	}
-
 	lp->laststate = read_state(lp);
 
 	ret = request_threaded_irq(client->irq, NULL, pcf8574_kp_irq_handler,
@@ -142,16 +134,21 @@ static int __devinit pcf8574_kp_probe(struct i2c_client *client, const struct i2
 				   DRV_NAME, lp);
 	if (ret) {
 		dev_err(&client->dev, "IRQ %d is not free\n", client->irq);
-		goto fail_irq;
+		goto fail_free_device;
+	}
+
+	ret = input_register_device(idev);
+	if (ret) {
+		dev_err(&client->dev, "input_register_device() failed\n");
+		goto fail_free_irq;
 	}
 
 	i2c_set_clientdata(client, lp);
 	return 0;
 
- fail_irq:
-	input_unregister_device(idev);
- fail_register:
-	input_set_drvdata(idev, NULL);
+ fail_free_irq:
+	free_irq(client->irq, lp);
+ fail_free_device:
 	input_free_device(idev);
  fail_allocate:
 	kfree(lp);

From 5fdbe44d033d059cc56c2803e6b4dbd8cb4e5e39 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Mon, 8 Nov 2010 21:51:25 -0800
Subject: [PATCH 0464/1066] Input: do not pass injected events back to the
 originating handler

Sometimes input handlers (as opposed to input devices) have a need to
inject (or re-inject) events back into input core. For example sysrq
filter may want to inject previously suppressed Alt-SysRq so that user
can take a screen print. In this case we do not want to pass such events
back to the same same handler that injected them to avoid loops.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/input.c | 37 ++++++++++++++++++++++++++-----------
 1 file changed, 26 insertions(+), 11 deletions(-)

diff --git a/drivers/input/input.c b/drivers/input/input.c
index 75bed635b98d..7f26ca6ecf75 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -74,6 +74,7 @@ static int input_defuzz_abs_event(int value, int old_val, int fuzz)
  * dev->event_lock held and interrupts disabled.
  */
 static void input_pass_event(struct input_dev *dev,
+			     struct input_handler *src_handler,
 			     unsigned int type, unsigned int code, int value)
 {
 	struct input_handler *handler;
@@ -92,6 +93,15 @@ static void input_pass_event(struct input_dev *dev,
 				continue;
 
 			handler = handle->handler;
+
+			/*
+			 * If this is the handler that injected this
+			 * particular event we want to skip it to avoid
+			 * filters firing again and again.
+			 */
+			if (handler == src_handler)
+				continue;
+
 			if (!handler->filter) {
 				if (filtered)
 					break;
@@ -121,7 +131,7 @@ static void input_repeat_key(unsigned long data)
 	if (test_bit(dev->repeat_key, dev->key) &&
 	    is_event_supported(dev->repeat_key, dev->keybit, KEY_MAX)) {
 
-		input_pass_event(dev, EV_KEY, dev->repeat_key, 2);
+		input_pass_event(dev, NULL, EV_KEY, dev->repeat_key, 2);
 
 		if (dev->sync) {
 			/*
@@ -130,7 +140,7 @@ static void input_repeat_key(unsigned long data)
 			 * Otherwise assume that the driver will send
 			 * SYN_REPORT once it's done.
 			 */
-			input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
+			input_pass_event(dev, NULL, EV_SYN, SYN_REPORT, 1);
 		}
 
 		if (dev->rep[REP_PERIOD])
@@ -163,6 +173,7 @@ static void input_stop_autorepeat(struct input_dev *dev)
 #define INPUT_PASS_TO_ALL	(INPUT_PASS_TO_HANDLERS | INPUT_PASS_TO_DEVICE)
 
 static int input_handle_abs_event(struct input_dev *dev,
+				  struct input_handler *src_handler,
 				  unsigned int code, int *pval)
 {
 	bool is_mt_event;
@@ -206,13 +217,15 @@ static int input_handle_abs_event(struct input_dev *dev,
 	/* Flush pending "slot" event */
 	if (is_mt_event && dev->slot != input_abs_get_val(dev, ABS_MT_SLOT)) {
 		input_abs_set_val(dev, ABS_MT_SLOT, dev->slot);
-		input_pass_event(dev, EV_ABS, ABS_MT_SLOT, dev->slot);
+		input_pass_event(dev, src_handler,
+				 EV_ABS, ABS_MT_SLOT, dev->slot);
 	}
 
 	return INPUT_PASS_TO_HANDLERS;
 }
 
 static void input_handle_event(struct input_dev *dev,
+			       struct input_handler *src_handler,
 			       unsigned int type, unsigned int code, int value)
 {
 	int disposition = INPUT_IGNORE_EVENT;
@@ -265,7 +278,8 @@ static void input_handle_event(struct input_dev *dev,
 
 	case EV_ABS:
 		if (is_event_supported(code, dev->absbit, ABS_MAX))
-			disposition = input_handle_abs_event(dev, code, &value);
+			disposition = input_handle_abs_event(dev, src_handler,
+							     code, &value);
 
 		break;
 
@@ -323,7 +337,7 @@ static void input_handle_event(struct input_dev *dev,
 		dev->event(dev, type, code, value);
 
 	if (disposition & INPUT_PASS_TO_HANDLERS)
-		input_pass_event(dev, type, code, value);
+		input_pass_event(dev, src_handler, type, code, value);
 }
 
 /**
@@ -352,7 +366,7 @@ void input_event(struct input_dev *dev,
 
 		spin_lock_irqsave(&dev->event_lock, flags);
 		add_input_randomness(type, code, value);
-		input_handle_event(dev, type, code, value);
+		input_handle_event(dev, NULL, type, code, value);
 		spin_unlock_irqrestore(&dev->event_lock, flags);
 	}
 }
@@ -382,7 +396,8 @@ void input_inject_event(struct input_handle *handle,
 		rcu_read_lock();
 		grab = rcu_dereference(dev->grab);
 		if (!grab || grab == handle)
-			input_handle_event(dev, type, code, value);
+			input_handle_event(dev, handle->handler,
+					   type, code, value);
 		rcu_read_unlock();
 
 		spin_unlock_irqrestore(&dev->event_lock, flags);
@@ -595,10 +610,10 @@ static void input_dev_release_keys(struct input_dev *dev)
 		for (code = 0; code <= KEY_MAX; code++) {
 			if (is_event_supported(code, dev->keybit, KEY_MAX) &&
 			    __test_and_clear_bit(code, dev->key)) {
-				input_pass_event(dev, EV_KEY, code, 0);
+				input_pass_event(dev, NULL, EV_KEY, code, 0);
 			}
 		}
-		input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
+		input_pass_event(dev, NULL, EV_SYN, SYN_REPORT, 1);
 	}
 }
 
@@ -873,9 +888,9 @@ int input_set_keycode(struct input_dev *dev,
 	    !is_event_supported(old_keycode, dev->keybit, KEY_MAX) &&
 	    __test_and_clear_bit(old_keycode, dev->key)) {
 
-		input_pass_event(dev, EV_KEY, old_keycode, 0);
+		input_pass_event(dev, NULL, EV_KEY, old_keycode, 0);
 		if (dev->sync)
-			input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
+			input_pass_event(dev, NULL, EV_SYN, SYN_REPORT, 1);
 	}
 
  out:

From 17a9e7bbae178d1326e4631ab6350a272349c99d Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 11 Nov 2010 12:09:59 +0100
Subject: [PATCH 0465/1066] Documentation: remove anticipatory scheduler info

Remove anticipatory block I/O scheduler info from Documentation/
since the code has been deleted.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-by: "Robert P. J. Day" <rpjday@crashcourse.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 Documentation/block/switching-sched.txt | 8 ++++----
 Documentation/kernel-parameters.txt     | 2 +-
 Documentation/rbtree.txt                | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/block/switching-sched.txt b/Documentation/block/switching-sched.txt
index d5af3f630814..71cfbdc0f74d 100644
--- a/Documentation/block/switching-sched.txt
+++ b/Documentation/block/switching-sched.txt
@@ -16,7 +16,7 @@ you can do so by typing:
 As of the Linux 2.6.10 kernel, it is now possible to change the
 IO scheduler for a given block device on the fly (thus making it possible,
 for instance, to set the CFQ scheduler for the system default, but
-set a specific device to use the anticipatory or noop schedulers - which
+set a specific device to use the deadline or noop schedulers - which
 can improve that device's throughput).
 
 To set a specific scheduler, simply do this:
@@ -31,7 +31,7 @@ a "cat /sys/block/DEV/queue/scheduler" - the list of valid names
 will be displayed, with the currently selected scheduler in brackets:
 
 # cat /sys/block/hda/queue/scheduler
-noop anticipatory deadline [cfq]
-# echo anticipatory > /sys/block/hda/queue/scheduler
+noop deadline [cfq]
+# echo deadline > /sys/block/hda/queue/scheduler
 # cat /sys/block/hda/queue/scheduler
-noop [anticipatory] deadline cfq
+noop [deadline] cfq
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index ed45e9802aa8..92e83e53148f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -706,7 +706,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			arch/x86/kernel/cpu/cpufreq/elanfreq.c.
 
 	elevator=	[IOSCHED]
-			Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
+			Format: {"cfq" | "deadline" | "noop"}
 			See Documentation/block/as-iosched.txt and
 			Documentation/block/deadline-iosched.txt for details.
 
diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt
index 221f38be98f4..19f8278c3854 100644
--- a/Documentation/rbtree.txt
+++ b/Documentation/rbtree.txt
@@ -21,8 +21,8 @@ three rotations, respectively, to balance the tree), with slightly slower
 To quote Linux Weekly News:
 
     There are a number of red-black trees in use in the kernel.
-    The anticipatory, deadline, and CFQ I/O schedulers all employ
-    rbtrees to track requests; the packet CD/DVD driver does the same.
+    The deadline and CFQ I/O schedulers employ rbtrees to
+    track requests; the packet CD/DVD driver does the same.
     The high-resolution timer code uses an rbtree to organize outstanding
     timer requests.  The ext3 filesystem tracks directory entries in a
     red-black tree.  Virtual memory areas (VMAs) are tracked with red-black

From cedb4a7d9f6aedb0dce94d6285b69dcb3c10fa05 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Thu, 11 Nov 2010 13:37:54 +0100
Subject: [PATCH 0466/1066] block: remove unused copy_io_context()

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/blk-ioc.c           | 14 --------------
 include/linux/iocontext.h |  1 -
 2 files changed, 15 deletions(-)

diff --git a/block/blk-ioc.c b/block/blk-ioc.c
index d22c4c55c406..3c7a339fe381 100644
--- a/block/blk-ioc.c
+++ b/block/blk-ioc.c
@@ -153,20 +153,6 @@ struct io_context *get_io_context(gfp_t gfp_flags, int node)
 }
 EXPORT_SYMBOL(get_io_context);
 
-void copy_io_context(struct io_context **pdst, struct io_context **psrc)
-{
-	struct io_context *src = *psrc;
-	struct io_context *dst = *pdst;
-
-	if (src) {
-		BUG_ON(atomic_long_read(&src->refcount) == 0);
-		atomic_long_inc(&src->refcount);
-		put_io_context(dst);
-		*pdst = src;
-	}
-}
-EXPORT_SYMBOL(copy_io_context);
-
 static int __init blk_ioc_init(void)
 {
 	iocontext_cachep = kmem_cache_create("blkdev_ioc",
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index 3e70b21884a9..b2eee896dcbc 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -76,7 +76,6 @@ int put_io_context(struct io_context *ioc);
 void exit_io_context(struct task_struct *task);
 struct io_context *get_io_context(gfp_t gfp_flags, int node);
 struct io_context *alloc_io_context(gfp_t gfp_flags, int node);
-void copy_io_context(struct io_context **pdst, struct io_context **psrc);
 #else
 static inline void exit_io_context(struct task_struct *task)
 {

From 1e5a74059f9059d330744eac84873b1b99657008 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Sun, 31 Oct 2010 12:37:04 +0100
Subject: [PATCH 0467/1066] sched: Fix cross-sched-class wakeup preemption

Instead of dealing with sched classes inside each check_preempt_curr()
implementation, pull out this logic into the generic wakeup preemption
path.

This fixes a hang in KVM (and others) where we are waiting for the
stop machine thread to run ...

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Tested-by: Marcelo Tosatti <mtosatti@redhat.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1288891946.2039.31.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c          | 37 ++++++++++++++++++++++++++-----------
 kernel/sched_fair.c     |  6 ------
 kernel/sched_stoptask.c |  2 +-
 3 files changed, 27 insertions(+), 18 deletions(-)

diff --git a/kernel/sched.c b/kernel/sched.c
index 36a088018fe0..dc91a4d09ac3 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -560,18 +560,8 @@ struct rq {
 
 static DEFINE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
 
-static inline
-void check_preempt_curr(struct rq *rq, struct task_struct *p, int flags)
-{
-	rq->curr->sched_class->check_preempt_curr(rq, p, flags);
 
-	/*
-	 * A queue event has occurred, and we're going to schedule.  In
-	 * this case, we can save a useless back to back clock update.
-	 */
-	if (test_tsk_need_resched(p))
-		rq->skip_clock_update = 1;
-}
+static void check_preempt_curr(struct rq *rq, struct task_struct *p, int flags);
 
 static inline int cpu_of(struct rq *rq)
 {
@@ -2118,6 +2108,31 @@ static inline void check_class_changed(struct rq *rq, struct task_struct *p,
 		p->sched_class->prio_changed(rq, p, oldprio, running);
 }
 
+static void check_preempt_curr(struct rq *rq, struct task_struct *p, int flags)
+{
+	const struct sched_class *class;
+
+	if (p->sched_class == rq->curr->sched_class) {
+		rq->curr->sched_class->check_preempt_curr(rq, p, flags);
+	} else {
+		for_each_class(class) {
+			if (class == rq->curr->sched_class)
+				break;
+			if (class == p->sched_class) {
+				resched_task(rq->curr);
+				break;
+			}
+		}
+	}
+
+	/*
+	 * A queue event has occurred, and we're going to schedule.  In
+	 * this case, we can save a useless back to back clock update.
+	 */
+	if (test_tsk_need_resched(rq->curr))
+		rq->skip_clock_update = 1;
+}
+
 #ifdef CONFIG_SMP
 /*
  * Is this task likely cache-hot:
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 034c4f410b36..52ab113d8bb9 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1654,12 +1654,6 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int wake_
 	struct cfs_rq *cfs_rq = task_cfs_rq(curr);
 	int scale = cfs_rq->nr_running >= sched_nr_latency;
 
-	if (unlikely(rt_prio(p->prio)))
-		goto preempt;
-
-	if (unlikely(p->sched_class != &fair_sched_class))
-		return;
-
 	if (unlikely(se == pse))
 		return;
 
diff --git a/kernel/sched_stoptask.c b/kernel/sched_stoptask.c
index 755483b2a2ad..2bf6b47058c1 100644
--- a/kernel/sched_stoptask.c
+++ b/kernel/sched_stoptask.c
@@ -19,7 +19,7 @@ select_task_rq_stop(struct rq *rq, struct task_struct *p,
 static void
 check_preempt_curr_stop(struct rq *rq, struct task_struct *p, int flags)
 {
-	resched_task(rq->curr); /* we preempt everything */
+	/* we're never preempted */
 }
 
 static struct task_struct *pick_next_task_stop(struct rq *rq)

From bbde7814cbc54d6b564d3f65b4b0e82eddef30a6 Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Thu, 11 Nov 2010 09:02:30 +1300
Subject: [PATCH 0468/1066] Fix Atmel soc audio boards Kconfig dependency

Add Kconfig dependency on AT91_PROGRAMMABLE_CLOCKS for the Atmel SoC
audio SAM9G20-EK and PlayPaq boards. Fixes link errors on missing
clk_set_parent and clk_set_rate when building without
AT91_PROGRAMMABLE_CLOCKS.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Geoffrey Wossum <gwossum@acm.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/atmel/Kconfig | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index e720d5e6f04c..bee3c94f58b0 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -16,7 +16,8 @@ config SND_ATMEL_SOC_SSC
 
 config SND_AT91_SOC_SAM9G20_WM8731
 	tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
-	depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC
+	depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC && \
+                   AT91_PROGRAMMABLE_CLOCKS
 	select SND_ATMEL_SOC_SSC
 	select SND_SOC_WM8731
 	help
@@ -25,7 +26,7 @@ config SND_AT91_SOC_SAM9G20_WM8731
 
 config SND_AT32_SOC_PLAYPAQ
         tristate "SoC Audio support for PlayPaq with WM8510"
-        depends on SND_ATMEL_SOC && BOARD_PLAYPAQ
+        depends on SND_ATMEL_SOC && BOARD_PLAYPAQ && AT91_PROGRAMMABLE_CLOCKS
         select SND_ATMEL_SOC_SSC
         select SND_SOC_WM8510
         help

From 018b97d084db483096421f95dfdf6c00e7144d67 Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Fri, 29 Oct 2010 11:04:49 +0200
Subject: [PATCH 0469/1066] USB: Fix FSL USB driver on non Open Firmware
 systems
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commit 126512e3f274802ca65ebeca8660237f0361ad48 added support for FSL's USB
controller on powerpc. In this commit the Open Firmware code was selected
and compiled unconditionally.

This breaks on ARM systems from FSL which use the same driver (.i.e. the i.MX
series), because ARM don't have OF support (yet). This patch fixes the problem
by only selecting the OF code on systems with Open Firmware support.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Compile-Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/gadget/Kconfig | 2 +-
 drivers/usb/host/Kconfig   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index b739ca814651..607d0db4a988 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -158,7 +158,7 @@ config USB_GADGET_FSL_USB2
 	boolean "Freescale Highspeed USB DR Peripheral Controller"
 	depends on FSL_SOC || ARCH_MXC
 	select USB_GADGET_DUALSPEED
-	select USB_FSL_MPH_DR_OF
+	select USB_FSL_MPH_DR_OF if OF
 	help
 	   Some of Freescale PowerPC processors have a High Speed
 	   Dual-Role(DR) USB controller, which supports device mode.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2391c396ca32..6f4f8e6a40c7 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -122,7 +122,7 @@ config USB_EHCI_FSL
 	bool "Support for Freescale on-chip EHCI USB controller"
 	depends on USB_EHCI_HCD && FSL_SOC
 	select USB_EHCI_ROOT_HUB_TT
-	select USB_FSL_MPH_DR_OF
+	select USB_FSL_MPH_DR_OF if OF
 	---help---
 	  Variation of ARC USB block used in some Freescale chips.
 

From 724c85251f78f1332e0a28f80cead0cee5b7c906 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Tue, 2 Nov 2010 10:30:57 +0100
Subject: [PATCH 0470/1066] USB: ehci/mxc: compile fix
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commit
	65fd427 (USB: ehci tdi : let's tdi_reset set host mode)

broke the build using ARM's mx51_defconfig:

 	  CC      drivers/usb/host/ehci-hcd.o
 	In file included from drivers/usb/host/ehci-hcd.c:1166:
 	drivers/usb/host/ehci-mxc.c: In function 'ehci_mxc_drv_probe':
 	drivers/usb/host/ehci-mxc.c:192: error: 'ehci' undeclared (first use in this function)
 	drivers/usb/host/ehci-mxc.c:192: error: (Each undeclared identifier is reported only once
 	drivers/usb/host/ehci-mxc.c:192: error: for each function it appears in.)
 	drivers/usb/host/ehci-mxc.c:117: warning: unused variable 'temp'
 	make[3]: *** [drivers/usb/host/ehci-hcd.o] Error 1
 	make[2]: *** [drivers/usb/host/ehci-hcd.o] Error 2
 	make[1]: *** [sub-make] Error 2
 	make: *** [all] Error 2

Fix it together with the warning about the unused variable and use
msleep instead of mdelay as requested by Alan Stern.

Cc: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Nguyen Dinh-R00091 <R00091@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/host/ehci-mxc.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index ac9c4d7c44af..bce85055019a 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -36,6 +36,8 @@ struct ehci_mxc_priv {
 static int ehci_mxc_setup(struct usb_hcd *hcd)
 {
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	struct device *dev = hcd->self.controller;
+	struct mxc_usbh_platform_data *pdata = dev_get_platdata(dev);
 	int retval;
 
 	/* EHCI registers start at offset 0x100 */
@@ -63,6 +65,12 @@ static int ehci_mxc_setup(struct usb_hcd *hcd)
 
 	ehci_reset(ehci);
 
+	/* set up the PORTSCx register */
+	ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]);
+
+	/* is this really needed? */
+	msleep(10);
+
 	ehci_port_power(ehci, 0);
 	return 0;
 }
@@ -114,7 +122,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 	struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data;
 	struct usb_hcd *hcd;
 	struct resource *res;
-	int irq, ret, temp;
+	int irq, ret;
 	struct ehci_mxc_priv *priv;
 	struct device *dev = &pdev->dev;
 
@@ -188,10 +196,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 		clk_enable(priv->ahbclk);
 	}
 
-	/* set up the PORTSCx register */
-	ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]);
-	mdelay(10);
-
 	/* setup specific usb hw */
 	ret = mxc_initialize_usb_hw(pdev->id, pdata->flags);
 	if (ret < 0)

From 4b4cd731b08fd7fa2f370a5b329062fb5006dc24 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@canonical.com>
Date: Wed, 3 Nov 2010 18:02:38 +0000
Subject: [PATCH 0471/1066] usb: gadget: goku_udc: add registered flag bit,
 fixing build

The commit below cleaned up error handling, in part by introducing a
registered flag bit.  This however was not added to the device
structure leding to build failures:

  commit 319feaabb6c7ccd90da6e3207563c265da7d21ae
  Author: Dan Carpenter <error27@gmail.com>
  Date:   Tue Oct 5 18:55:34 2010 +0200

    usb: gadget: goku_udc: Fix error path

Add the missing registered flag bit.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/gadget/goku_udc.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h
index 566cb2319056..e7e0c69d3b1f 100644
--- a/drivers/usb/gadget/goku_udc.h
+++ b/drivers/usb/gadget/goku_udc.h
@@ -251,7 +251,8 @@ struct goku_udc {
 					got_region:1,
 					req_config:1,
 					configured:1,
-					enabled:1;
+					enabled:1,
+					registered:1;
 
 	/* pci state used to access those endpoints */
 	struct pci_dev			*pdev;

From ef821ae70fc35a76bdce7e07c70a1a7c2c33cdb9 Mon Sep 17 00:00:00 2001
From: David Sterba <dsterba@suse.cz>
Date: Tue, 2 Nov 2010 23:47:18 +0100
Subject: [PATCH 0472/1066] USB: xhci: Use GFP_ATOMIC under spin_lock

coccinelle check scripts/coccinelle/locks/call_kern.cocci found that
in drivers/usb/host/xhci.c an allocation with GFP_KERNEL is done
with locks held:

xhci_resume
  spin_lock_irq(xhci->lock)
    xhci_setup_msix
      kmalloc(GFP_KERNEL)

Change it to GFP_ATOMIC.

Signed-off-by: David Sterba <dsterba@suse.cz>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/host/xhci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 5d7d4e951ea4..8ddc965718ab 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -240,7 +240,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci)
 
 	xhci->msix_entries =
 		kmalloc((sizeof(struct msix_entry))*xhci->msix_count,
-				GFP_KERNEL);
+				GFP_ATOMIC);
 	if (!xhci->msix_entries) {
 		xhci_err(xhci, "Failed to allocate MSI-X entries\n");
 		return -ENOMEM;

From 58c0d9d70109bd7e82bdb9517007311a48499960 Mon Sep 17 00:00:00 2001
From: ma rui <m00150988@huawei.com>
Date: Mon, 1 Nov 2010 11:32:18 +0800
Subject: [PATCH 0473/1066] USB: option: fix when the driver is loaded
 incorrectly for some Huawei devices.

When huawei datacard with PID 0x14AC is insterted into Linux system, the
present kernel will load the "option" driver to all the interfaces. But
actually, some interfaces run as other function and do not need "option"
driver.

In this path, we modify the id_tables, when the PID is 0x14ac ,VID is
0x12d1, Only when the interface's Class is 0xff,Subclass is 0xff, Pro is
0xff, it does need "option" driver.

Signed-off-by: ma rui <m00150988@huawei.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/option.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 2297fb1bcf65..ef2977d3a613 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -518,7 +518,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) },

From 28609d4083bcd4879e951b0c4ecf4c3a88761261 Mon Sep 17 00:00:00 2001
From: Jim Sung <jsung@syncadence.com>
Date: Thu, 4 Nov 2010 18:47:51 -0700
Subject: [PATCH 0474/1066] usb: subtle increased memory usage in u_serial

OK, the USB gadget serial driver actually has a couple of problems.  On
gs_open(), it always allocates and queues an additional QUEUE_SIZE (16)
worth of requests, so with a loop like this:

    i=1 ; while echo $i > /dev/ttyGS0 ; do let i++ ; done

eventually we run into OOM (Out of Memory).

Technically, it is not a leak as everything gets freed up when the USB
connection is broken, but not on gs_close().

With a USB device/gadget controller driver that has limited resources
(e.g., Marvell has a this MAX_XDS_FOR_TR_CALLS of 64 for transmit and
receive), so even after 4

    stty -F /dev/ttyGS0

we cannot transmit anymore.  We can still receive (not necessarily
reliably) as now we have 16 * 4 = 64 descriptors/buffers ready, but the
device is otherwise not usable.

Signed-off-by: Jim Sung <jsung@syncadence.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/gadget/u_serial.c | 54 ++++++++++++++++++++++++++---------
 1 file changed, 40 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 01e5354a4c20..40f7716b31fc 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -105,11 +105,15 @@ struct gs_port {
 	wait_queue_head_t	close_wait;	/* wait for last close */
 
 	struct list_head	read_pool;
+	int read_started;
+	int read_allocated;
 	struct list_head	read_queue;
 	unsigned		n_read;
 	struct tasklet_struct	push;
 
 	struct list_head	write_pool;
+	int write_started;
+	int write_allocated;
 	struct gs_buf		port_write_buf;
 	wait_queue_head_t	drain_wait;	/* wait while writes drain */
 
@@ -363,6 +367,9 @@ __acquires(&port->port_lock)
 		struct usb_request	*req;
 		int			len;
 
+		if (port->write_started >= QUEUE_SIZE)
+			break;
+
 		req = list_entry(pool->next, struct usb_request, list);
 		len = gs_send_packet(port, req->buf, in->maxpacket);
 		if (len == 0) {
@@ -397,6 +404,8 @@ __acquires(&port->port_lock)
 			break;
 		}
 
+		port->write_started++;
+
 		/* abort immediately after disconnect */
 		if (!port->port_usb)
 			break;
@@ -418,7 +427,6 @@ __acquires(&port->port_lock)
 {
 	struct list_head	*pool = &port->read_pool;
 	struct usb_ep		*out = port->port_usb->out;
-	unsigned		started = 0;
 
 	while (!list_empty(pool)) {
 		struct usb_request	*req;
@@ -430,6 +438,9 @@ __acquires(&port->port_lock)
 		if (!tty)
 			break;
 
+		if (port->read_started >= QUEUE_SIZE)
+			break;
+
 		req = list_entry(pool->next, struct usb_request, list);
 		list_del(&req->list);
 		req->length = out->maxpacket;
@@ -447,13 +458,13 @@ __acquires(&port->port_lock)
 			list_add(&req->list, pool);
 			break;
 		}
-		started++;
+		port->read_started++;
 
 		/* abort immediately after disconnect */
 		if (!port->port_usb)
 			break;
 	}
-	return started;
+	return port->read_started;
 }
 
 /*
@@ -535,6 +546,7 @@ static void gs_rx_push(unsigned long _port)
 		}
 recycle:
 		list_move(&req->list, &port->read_pool);
+		port->read_started--;
 	}
 
 	/* Push from tty to ldisc; without low_latency set this is handled by
@@ -587,6 +599,7 @@ static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
 
 	spin_lock(&port->port_lock);
 	list_add(&req->list, &port->write_pool);
+	port->write_started--;
 
 	switch (req->status) {
 	default:
@@ -608,7 +621,8 @@ static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
 	spin_unlock(&port->port_lock);
 }
 
-static void gs_free_requests(struct usb_ep *ep, struct list_head *head)
+static void gs_free_requests(struct usb_ep *ep, struct list_head *head,
+							 int *allocated)
 {
 	struct usb_request	*req;
 
@@ -616,25 +630,31 @@ static void gs_free_requests(struct usb_ep *ep, struct list_head *head)
 		req = list_entry(head->next, struct usb_request, list);
 		list_del(&req->list);
 		gs_free_req(ep, req);
+		if (allocated)
+			(*allocated)--;
 	}
 }
 
 static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head,
-		void (*fn)(struct usb_ep *, struct usb_request *))
+		void (*fn)(struct usb_ep *, struct usb_request *),
+		int *allocated)
 {
 	int			i;
 	struct usb_request	*req;
+	int n = allocated ? QUEUE_SIZE - *allocated : QUEUE_SIZE;
 
 	/* Pre-allocate up to QUEUE_SIZE transfers, but if we can't
 	 * do quite that many this time, don't fail ... we just won't
 	 * be as speedy as we might otherwise be.
 	 */
-	for (i = 0; i < QUEUE_SIZE; i++) {
+	for (i = 0; i < n; i++) {
 		req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
 		if (!req)
 			return list_empty(head) ? -ENOMEM : 0;
 		req->complete = fn;
 		list_add_tail(&req->list, head);
+		if (allocated)
+			(*allocated)++;
 	}
 	return 0;
 }
@@ -661,14 +681,15 @@ static int gs_start_io(struct gs_port *port)
 	 * configurations may use different endpoints with a given port;
 	 * and high speed vs full speed changes packet sizes too.
 	 */
-	status = gs_alloc_requests(ep, head, gs_read_complete);
+	status = gs_alloc_requests(ep, head, gs_read_complete,
+		&port->read_allocated);
 	if (status)
 		return status;
 
 	status = gs_alloc_requests(port->port_usb->in, &port->write_pool,
-			gs_write_complete);
+			gs_write_complete, &port->write_allocated);
 	if (status) {
-		gs_free_requests(ep, head);
+		gs_free_requests(ep, head, &port->read_allocated);
 		return status;
 	}
 
@@ -680,8 +701,9 @@ static int gs_start_io(struct gs_port *port)
 	if (started) {
 		tty_wakeup(port->port_tty);
 	} else {
-		gs_free_requests(ep, head);
-		gs_free_requests(port->port_usb->in, &port->write_pool);
+		gs_free_requests(ep, head, &port->read_allocated);
+		gs_free_requests(port->port_usb->in, &port->write_pool,
+			&port->write_allocated);
 		status = -EIO;
 	}
 
@@ -1315,8 +1337,12 @@ void gserial_disconnect(struct gserial *gser)
 	spin_lock_irqsave(&port->port_lock, flags);
 	if (port->open_count == 0 && !port->openclose)
 		gs_buf_free(&port->port_write_buf);
-	gs_free_requests(gser->out, &port->read_pool);
-	gs_free_requests(gser->out, &port->read_queue);
-	gs_free_requests(gser->in, &port->write_pool);
+	gs_free_requests(gser->out, &port->read_pool, NULL);
+	gs_free_requests(gser->out, &port->read_queue, NULL);
+	gs_free_requests(gser->in, &port->write_pool, NULL);
+
+	port->read_allocated = port->read_started =
+		port->write_allocated = port->write_started = 0;
+
 	spin_unlock_irqrestore(&port->port_lock, flags);
 }

From 5dc92cf1d0b4b0debbd2e333b83f9746c103533d Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segooon@gmail.com>
Date: Sat, 6 Nov 2010 17:41:35 +0300
Subject: [PATCH 0475/1066] usb: misc: sisusbvga: fix information leak to
 userland

Structure sisusb_info is copied to userland with "sisusb_reserved" field
uninitialized.  It leads to leaking of contents of kernel stack memory.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/misc/sisusbvga/sisusb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 70d00e99a4b4..dd573abd2d1e 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3008,6 +3008,7 @@ sisusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 #else
 			x.sisusb_conactive  = 0;
 #endif
+			memset(x.sisusb_reserved, 0, sizeof(x.sisusb_reserved));
 
 			if (copy_to_user((void __user *)arg, &x, sizeof(x)))
 				retval = -EFAULT;

From eca67aaeebd6e5d22b0d991af1dd0424dc703bfb Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segooon@gmail.com>
Date: Sat, 6 Nov 2010 17:41:31 +0300
Subject: [PATCH 0476/1066] usb: misc: iowarrior: fix information leak to
 userland

Structure iowarrior_info is copied to userland with padding byted
between "serial" and "revision" fields uninitialized.  It leads to
leaking of contents of kernel stack memory.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Cc: stable <stable@kernel.org>
Acked-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/misc/iowarrior.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 375664198776..c9078e4e1f4d 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -553,6 +553,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd,
 			/* needed for power consumption */
 			struct usb_config_descriptor *cfg_descriptor = &dev->udev->actconfig->desc;
 
+			memset(&info, 0, sizeof(info));
 			/* directly from the descriptor */
 			info.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
 			info.product = dev->product_id;

From 886ccd4520064408ce5876cfe00554ce52ecf4a7 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segooon@gmail.com>
Date: Sat, 6 Nov 2010 17:41:28 +0300
Subject: [PATCH 0477/1066] usb: core: fix information leak to userland

Structure usbdevfs_connectinfo is copied to userland with padding byted
after "slow" field uninitialized.  It leads to leaking of contents of
kernel stack memory.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/core/devio.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index f1aaff6202a5..045bb4b823e1 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -965,10 +965,11 @@ static int proc_getdriver(struct dev_state *ps, void __user *arg)
 
 static int proc_connectinfo(struct dev_state *ps, void __user *arg)
 {
-	struct usbdevfs_connectinfo ci;
+	struct usbdevfs_connectinfo ci = {
+		.devnum = ps->dev->devnum,
+		.slow = ps->dev->speed == USB_SPEED_LOW
+	};
 
-	ci.devnum = ps->dev->devnum;
-	ci.slow = ps->dev->speed == USB_SPEED_LOW;
 	if (copy_to_user(arg, &ci, sizeof(ci)))
 		return -EFAULT;
 	return 0;

From 793b62337ecf1bf9a816fcb7105bb1ca424cf7d4 Mon Sep 17 00:00:00 2001
From: Jesper Juhl <jj@chaosbits.net>
Date: Sun, 7 Nov 2010 22:04:43 +0100
Subject: [PATCH 0478/1066] UWB: Return UWB_RSV_ALLOC_NOT_FOUND rather than
 crashing on NULL dereference if kzalloc fails

Crashing on a null pointer deref is never a nice thing to do. It seems
to me that it's better to simply return UWB_RSV_ALLOC_NOT_FOUND if
kzalloc() fails in uwb_rsv_find_best_allocation().

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/uwb/allocator.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/uwb/allocator.c b/drivers/uwb/allocator.c
index 436e4f7110cb..e45e673b8770 100644
--- a/drivers/uwb/allocator.c
+++ b/drivers/uwb/allocator.c
@@ -326,7 +326,8 @@ int uwb_rsv_find_best_allocation(struct uwb_rsv *rsv, struct uwb_mas_bm *availab
 	int bit_index;
 
 	ai = kzalloc(sizeof(struct uwb_rsv_alloc_info), GFP_KERNEL);
-	
+	if (!ai)
+		return UWB_RSV_ALLOC_NOT_FOUND;
 	ai->min_mas = rsv->min_mas;
 	ai->max_mas = rsv->max_mas;
 	ai->max_interval = rsv->max_interval;

From 1c0a38038e8fcfaa6b5a81d53a4898f3f939f582 Mon Sep 17 00:00:00 2001
From: Stefan Weil <weil@mail.berlios.de>
Date: Sun, 7 Nov 2010 22:14:31 +0100
Subject: [PATCH 0479/1066] USB: ohci-jz4740: Fix spelling in MODULE_ALIAS

platfrom -> platform

Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/host/ohci-jz4740.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/ohci-jz4740.c b/drivers/usb/host/ohci-jz4740.c
index 10e1872f3ab9..931d588c3fb5 100644
--- a/drivers/usb/host/ohci-jz4740.c
+++ b/drivers/usb/host/ohci-jz4740.c
@@ -273,4 +273,4 @@ static struct platform_driver ohci_hcd_jz4740_driver = {
 	},
 };
 
-MODULE_ALIAS("platfrom:jz4740-ohci");
+MODULE_ALIAS("platform:jz4740-ohci");

From f7334b4ca9108a86b64fbd0f435f44b2113ee053 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Mon, 8 Nov 2010 00:11:33 -0500
Subject: [PATCH 0480/1066] hwmon: (adt7470) Return proper error code for
 adt7470_probe()

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/adt7470.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 9e775717abb7..87d92a56a939 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -1286,8 +1286,10 @@ static int adt7470_probe(struct i2c_client *client,
 	init_completion(&data->auto_update_stop);
 	data->auto_update = kthread_run(adt7470_update_thread, client,
 					dev_name(data->hwmon_dev));
-	if (IS_ERR(data->auto_update))
+	if (IS_ERR(data->auto_update)) {
+		err = PTR_ERR(data->auto_update);
 		goto exit_unregister;
+	}
 
 	return 0;
 

From f0030d87be3cb2eb9eac633d09cb5d9f107ed0c6 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Mon, 8 Nov 2010 20:40:34 -0500
Subject: [PATCH 0481/1066] hwmon: (ad7414) Return proper error code for
 ad7414_probe()

Return proper error if i2c_check_functionality reports
the adapter does not support the capability we need.

Also remove unneeded initialization for err variable.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/ad7414.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c
index 1e4c21fc1a89..86d822aa9bbf 100644
--- a/drivers/hwmon/ad7414.c
+++ b/drivers/hwmon/ad7414.c
@@ -178,11 +178,13 @@ static int ad7414_probe(struct i2c_client *client,
 {
 	struct ad7414_data *data;
 	int conf;
-	int err = 0;
+	int err;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
-				     I2C_FUNC_SMBUS_READ_WORD_DATA))
+				     I2C_FUNC_SMBUS_READ_WORD_DATA)) {
+		err = -EOPNOTSUPP;
 		goto exit;
+	}
 
 	data = kzalloc(sizeof(struct ad7414_data), GFP_KERNEL);
 	if (!data) {

From ac3abf2c37a9b0be604ea9825705a8510a9a6ba3 Mon Sep 17 00:00:00 2001
From: Steven Rostedt <rostedt@goodmis.org>
Date: Mon, 8 Nov 2010 23:20:27 -0500
Subject: [PATCH 0482/1066] PCI hotplug: ibmphp: Add check to prevent reading
 beyond mapped area

While testing various randconfigs with ktest.pl, I hit the following panic:

BUG: unable to handle kernel paging request at f7e54b03
IP: [<c0d63409>] ibmphp_access_ebda+0x101/0x19bb

Adding printks, I found that the loop that reads the ebda blocks
can move out of the mapped section.

ibmphp_access_ebda: start=f7e44c00 size=5120 end=f7e46000
ibmphp_access_ebda: io_mem=f7e44d80 offset=384
ibmphp_access_ebda: io_mem=f7e54b03 offset=65283

The start of the iomap was at f7e44c00 and had a size of 5120,
making the end f7e46000. We start with an offset of 0x180 or
384, giving the first read at 0xf7e44d80. Reading that location
yields 65283, which is much bigger than the 5120 that was allocated
and makes the next read at f7e54b03 which is outside the mapped area.

Perhaps this is a bug in the driver, or buggy hardware, but this patch
is more about not crashing my box on start up and just giving a warning
if it detects this error.

This patch at least lets my box boot with just a warning.

Cc: Chandru Siddalingappa <chandru@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/hotplug/ibmphp_ebda.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c
index 5becbdee4027..2850e64dedae 100644
--- a/drivers/pci/hotplug/ibmphp_ebda.c
+++ b/drivers/pci/hotplug/ibmphp_ebda.c
@@ -276,6 +276,12 @@ int __init ibmphp_access_ebda (void)
 
 	for (;;) {
 		offset = next_offset;
+
+		/* Make sure what we read is still in the mapped section */
+		if (WARN(offset > (ebda_sz * 1024 - 4),
+			 "ibmphp_ebda: next read is beyond ebda_sz\n"))
+			break;
+
 		next_offset = readw (io_mem + offset);	/* offset of next blk */
 
 		offset += 2;

From 4723d0f2f96e6c910f951d595067eb31e0dd2d01 Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bjorn.helgaas@hp.com>
Date: Wed, 22 Sep 2010 11:09:19 -0600
Subject: [PATCH 0483/1066] x86/PCI: coalesce overlapping host bridge windows

Some BIOSes provide PCI host bridge windows that overlap, e.g.,

    pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xffffffff]
    pci_root PNP0A03:00: host bridge window [mem 0xafffffff-0xdfffffff]
    pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xffffffff]

If we simply insert these as children of iomem_resource, the second window
fails because it conflicts with the first, and the third is inserted as a
child of the first, i.e.,

    b0000000-ffffffff PCI Bus 0000:00
      f0000000-ffffffff PCI Bus 0000:00

When we claim PCI device resources, this can cause collisions like this
if we put them in the first window:

    pci 0000:00:01.0: address space collision: [mem 0xff300000-0xff4fffff] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xffffffff]

Host bridge windows are top-level resources by definition, so it doesn't
make sense to make the third window a child of the first.  This patch
coalesces any host bridge windows that overlap.  For the example above,
the result is this single window:

    pci_root PNP0A03:00: host bridge window [mem 0xafffffff-0xffffffff]

This fixes a 2.6.34 regression.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=17011
Reported-and-tested-by: Anisse Astier <anisse@astier.eu>
Reported-and-tested-by: Pramod Dematagoda <pmd.lotr.gandalf@gmail.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/pci/acpi.c | 105 +++++++++++++++++++++++++++++++++++---------
 1 file changed, 84 insertions(+), 21 deletions(-)

diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 15466c096ba5..0972315c3860 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -138,7 +138,6 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	struct acpi_resource_address64 addr;
 	acpi_status status;
 	unsigned long flags;
-	struct resource *root, *conflict;
 	u64 start, end;
 
 	status = resource_to_addr(acpi_res, &addr);
@@ -146,12 +145,10 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 		return AE_OK;
 
 	if (addr.resource_type == ACPI_MEMORY_RANGE) {
-		root = &iomem_resource;
 		flags = IORESOURCE_MEM;
 		if (addr.info.mem.caching == ACPI_PREFETCHABLE_MEMORY)
 			flags |= IORESOURCE_PREFETCH;
 	} else if (addr.resource_type == ACPI_IO_RANGE) {
-		root = &ioport_resource;
 		flags = IORESOURCE_IO;
 	} else
 		return AE_OK;
@@ -172,27 +169,92 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 		return AE_OK;
 	}
 
-	conflict = insert_resource_conflict(root, res);
-	if (conflict) {
-		dev_err(&info->bridge->dev,
-			"address space collision: host bridge window %pR "
-			"conflicts with %s %pR\n",
-			res, conflict->name, conflict);
-	} else {
-		pci_bus_add_resource(info->bus, res, 0);
-		info->res_num++;
-		if (addr.translation_offset)
-			dev_info(&info->bridge->dev, "host bridge window %pR "
-				 "(PCI address [%#llx-%#llx])\n",
-				 res, res->start - addr.translation_offset,
-				 res->end - addr.translation_offset);
-		else
-			dev_info(&info->bridge->dev,
-				 "host bridge window %pR\n", res);
-	}
+	info->res_num++;
+	if (addr.translation_offset)
+		dev_info(&info->bridge->dev, "host bridge window %pR "
+			 "(PCI address [%#llx-%#llx])\n",
+			 res, res->start - addr.translation_offset,
+			 res->end - addr.translation_offset);
+	else
+		dev_info(&info->bridge->dev, "host bridge window %pR\n", res);
+
 	return AE_OK;
 }
 
+static bool resource_contains(struct resource *res, resource_size_t point)
+{
+	if (res->start <= point && point <= res->end)
+		return true;
+	return false;
+}
+
+static void coalesce_windows(struct pci_root_info *info, int type)
+{
+	int i, j;
+	struct resource *res1, *res2;
+
+	for (i = 0; i < info->res_num; i++) {
+		res1 = &info->res[i];
+		if (!(res1->flags & type))
+			continue;
+
+		for (j = i + 1; j < info->res_num; j++) {
+			res2 = &info->res[j];
+			if (!(res2->flags & type))
+				continue;
+
+			/*
+			 * I don't like throwing away windows because then
+			 * our resources no longer match the ACPI _CRS, but
+			 * the kernel resource tree doesn't allow overlaps.
+			 */
+			if (resource_contains(res1, res2->start) ||
+			    resource_contains(res1, res2->end) ||
+			    resource_contains(res2, res1->start) ||
+			    resource_contains(res2, res1->end)) {
+				res1->start = min(res1->start, res2->start);
+				res1->end = max(res1->end, res2->end);
+				dev_info(&info->bridge->dev,
+					 "host bridge window expanded to %pR; %pR ignored\n",
+					 res1, res2);
+				res2->flags = 0;
+			}
+		}
+	}
+}
+
+static void add_resources(struct pci_root_info *info)
+{
+	int i;
+	struct resource *res, *root, *conflict;
+
+	if (!pci_use_crs)
+		return;
+
+	coalesce_windows(info, IORESOURCE_MEM);
+	coalesce_windows(info, IORESOURCE_IO);
+
+	for (i = 0; i < info->res_num; i++) {
+		res = &info->res[i];
+
+		if (res->flags & IORESOURCE_MEM)
+			root = &iomem_resource;
+		else if (res->flags & IORESOURCE_IO)
+			root = &ioport_resource;
+		else
+			continue;
+
+		conflict = insert_resource_conflict(root, res);
+		if (conflict)
+			dev_err(&info->bridge->dev,
+				"address space collision: host bridge window %pR "
+				"conflicts with %s %pR\n",
+				res, conflict->name, conflict);
+		else
+			pci_bus_add_resource(info->bus, res, 0);
+	}
+}
+
 static void
 get_current_resources(struct acpi_device *device, int busnum,
 			int domain, struct pci_bus *bus)
@@ -224,6 +286,7 @@ get_current_resources(struct acpi_device *device, int busnum,
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
 				&info);
 
+	add_resources(&info);
 	return;
 
 name_alloc_fail:

From 3b519e4ea618b6943a82931630872907f9ac2c2b Mon Sep 17 00:00:00 2001
From: Martin Wilck <martin.wilck@ts.fujitsu.com>
Date: Wed, 10 Nov 2010 11:03:21 +0100
Subject: [PATCH 0484/1066] PCI: fix size checks for mmap() on /proc/bus/pci
 files

The checks for valid mmaps of PCI resources made through /proc/bus/pci files
that were introduced in 9eff02e2042f96fb2aedd02e032eca1c5333d767 have several
problems:

1. mmap() calls on /proc/bus/pci files are made with real file offsets > 0,
whereas under /sys/bus/pci/devices, the start of the resource corresponds
to offset 0. This may lead to false negatives in pci_mmap_fits(), which
implicitly assumes the /sys/bus/pci/devices layout.

2. The loop in proc_bus_pci_mmap doesn't skip empty resouces. This leads
to false positives, because pci_mmap_fits() doesn't treat empty resources
correctly (the calculated size is 1 << (8*sizeof(resource_size_t)-PAGE_SHIFT)
in this case!).

3. If a user maps resources with BAR > 0, pci_mmap_fits will emit bogus
WARNINGS for the first resources that don't fit until the correct one is found.

On many controllers the first 2-4 BARs are used, and the others are empty.
In this case, an mmap attempt will first fail on the non-empty BARs
(including the "right" BAR because of 1.) and emit bogus WARNINGS because
of 3., and finally succeed on the first empty BAR because of 2.
This is certainly not the intended behaviour.

This patch addresses all 3 issues.
Updated with an enum type for the additional parameter for pci_mmap_fits().

Cc: stable@kernel.org
Signed-off-by: Martin Wilck <martin.wilck@ts.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/pci-sysfs.c | 22 ++++++++++++++++------
 drivers/pci/pci.h       |  7 ++++++-
 drivers/pci/proc.c      |  2 +-
 3 files changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index b5a7d9bfcb24..25accc9dda3b 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -705,17 +705,21 @@ void pci_remove_legacy_files(struct pci_bus *b)
 
 #ifdef HAVE_PCI_MMAP
 
-int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma)
+int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma,
+		  enum pci_mmap_api mmap_api)
 {
-	unsigned long nr, start, size;
+	unsigned long nr, start, size, pci_start;
 
+	if (pci_resource_len(pdev, resno) == 0)
+		return 0;
 	nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 	start = vma->vm_pgoff;
 	size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1;
-	if (start < size && size - start >= nr)
+	pci_start = (mmap_api == PCI_MMAP_SYSFS) ?
+			pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
+	if (start >= pci_start && start < pci_start + size &&
+			start + nr <= pci_start + size)
 		return 1;
-	WARN(1, "process \"%s\" tried to map 0x%08lx-0x%08lx on %s BAR %d (size 0x%08lx)\n",
-		current->comm, start, start+nr, pci_name(pdev), resno, size);
 	return 0;
 }
 
@@ -745,8 +749,14 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
 	if (i >= PCI_ROM_RESOURCE)
 		return -ENODEV;
 
-	if (!pci_mmap_fits(pdev, i, vma))
+	if (!pci_mmap_fits(pdev, i, vma, PCI_MMAP_SYSFS)) {
+		WARN(1, "process \"%s\" tried to map 0x%08lx bytes "
+			"at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n",
+			current->comm, vma->vm_end-vma->vm_start, vma->vm_pgoff,
+			pci_name(pdev), i,
+			pci_resource_start(pdev, i), pci_resource_len(pdev, i));
 		return -EINVAL;
+	}
 
 	/* pci_mmap_page_range() expects the same kind of entry as coming
 	 * from /proc/bus/pci/ which is a "user visible" value. If this is
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index f5c7c382765f..7d33f6673868 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -22,8 +22,13 @@ extern void pci_remove_firmware_label_files(struct pci_dev *pdev);
 #endif
 extern void pci_cleanup_rom(struct pci_dev *dev);
 #ifdef HAVE_PCI_MMAP
+enum pci_mmap_api {
+	PCI_MMAP_SYSFS,	/* mmap on /sys/bus/pci/devices/<BDF>/resource<N> */
+	PCI_MMAP_PROCFS	/* mmap on /proc/bus/pci/<BDF> */
+};
 extern int pci_mmap_fits(struct pci_dev *pdev, int resno,
-			 struct vm_area_struct *vma);
+			 struct vm_area_struct *vmai,
+			 enum pci_mmap_api mmap_api);
 #endif
 int pci_probe_reset_function(struct pci_dev *dev);
 
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index 297b72c880a1..ea00647f4732 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -257,7 +257,7 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma)
 
 	/* Make sure the caller is mapping a real resource for this device */
 	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
-		if (pci_mmap_fits(dev, i, vma))
+		if (pci_mmap_fits(dev, i, vma,  PCI_MMAP_PROCFS))
 			break;
 	}
 

From 97c145f7c87453cec90e91238fba5fe2c1561b32 Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Fri, 5 Nov 2010 15:16:36 -0400
Subject: [PATCH 0485/1066] PCI: read current power state at enable time

When we enable a PCI device, we avoid doing a lot of the initial setup
work if the device's enable count is non-zero.  If we don't fetch the
power state though, we may later fail to set up MSI due to the unknown
status.  So pick it up before we short circuit the rest due to a
pre-existing enable or mismatched enable/disable pair (as happens with
VGA devices, which are special in a special way).

Tested-by: Jesse Brandeburg <jesse.brandeburg@gmail.com>
Reported-by: Dave Airlie <airlied@linux.ie>
Tested-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/pci.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e98c8104297b..710c8a29be0d 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1007,6 +1007,18 @@ static int __pci_enable_device_flags(struct pci_dev *dev,
 	int err;
 	int i, bars = 0;
 
+	/*
+	 * Power state could be unknown at this point, either due to a fresh
+	 * boot or a device removal call.  So get the current power state
+	 * so that things like MSI message writing will behave as expected
+	 * (e.g. if the device really is in D0 at enable time).
+	 */
+	if (dev->pm_cap) {
+		u16 pmcsr;
+		pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+		dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+	}
+
 	if (atomic_add_return(1, &dev->enable_cnt) > 1)
 		return 0;		/* already enabled */
 

From 868719752d60fb04a3714d77fdeb780b4d585faf Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Thu, 11 Nov 2010 09:41:02 -0800
Subject: [PATCH 0486/1066] Revert "USB: xhci: Use GFP_ATOMIC under spin_lock"

This reverts commit ef821ae70fc35a76bdce7e07c70a1a7c2c33cdb9.

The correct thing to do is to drop the spinlock, not change
the GFP flag here.

Thanks to Sarah for pointing out I shouldn't have taken this patch in
the first place.

Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/host/xhci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 8ddc965718ab..5d7d4e951ea4 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -240,7 +240,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci)
 
 	xhci->msix_entries =
 		kmalloc((sizeof(struct msix_entry))*xhci->msix_count,
-				GFP_ATOMIC);
+				GFP_KERNEL);
 	if (!xhci->msix_entries) {
 		xhci_err(xhci, "Failed to allocate MSI-X entries\n");
 		return -ENOMEM;

From 4f5b7994f0610fefff0782227ab71469ece54a5b Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Tue, 9 Nov 2010 08:41:48 +0000
Subject: [PATCH 0487/1066] hwmon: (gpio-fan) Fix fan_ctrl_init error path

In current implementation, the sysfs entries is not removed before return -ENODEV.

Creating the sysfs attribute should be the last thing done by the function,
after all the rest has been successful.
Otherwise there is a small window during which user-space can access the attribute
but the driver isn't ready to deal with the requests.

Fix it by moving sysfs_create_group to be the last thing done by the function.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/gpio-fan.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index aa701a183707..f141a1de519c 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -376,10 +376,6 @@ static int fan_ctrl_init(struct gpio_fan_data *fan_data,
 		}
 	}
 
-	err = sysfs_create_group(&pdev->dev.kobj, &gpio_fan_ctrl_group);
-	if (err)
-		goto err_free_gpio;
-
 	fan_data->num_ctrl = num_ctrl;
 	fan_data->ctrl = ctrl;
 	fan_data->num_speed = pdata->num_speed;
@@ -391,6 +387,10 @@ static int fan_ctrl_init(struct gpio_fan_data *fan_data,
 		goto err_free_gpio;
 	}
 
+	err = sysfs_create_group(&pdev->dev.kobj, &gpio_fan_ctrl_group);
+	if (err)
+		goto err_free_gpio;
+
 	return 0;
 
 err_free_gpio:

From b74831e6437c0cbbd310dc587579390a146dc7a0 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 10 Nov 2010 09:47:51 -0800
Subject: [PATCH 0488/1066] MAINTAINERS: Mark XEN lists as moderated

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 MAINTAINERS | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index acf13f2f9f78..6a16f21117df 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6598,14 +6598,14 @@ F:	drivers/platform/x86
 
 XEN PCI SUBSYSTEM
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L:	xen-devel@lists.xensource.com
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 S:	Supported
 F:	arch/x86/pci/*xen*
 F:	drivers/pci/*xen*
 
 XEN SWIOTLB SUBSYSTEM
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L:	xen-devel@lists.xensource.com
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 S:	Supported
 F:	arch/x86/xen/*swiotlb*
 F:	drivers/xen/*swiotlb*
@@ -6613,7 +6613,7 @@ F:	drivers/xen/*swiotlb*
 XEN HYPERVISOR INTERFACE
 M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L:	xen-devel@lists.xensource.com
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 L:	virtualization@lists.osdl.org
 S:	Supported
 F:	arch/x86/xen/

From 241b652f1995de138106afd2f2e4eda9f8a3c240 Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Fri, 5 Nov 2010 09:59:01 -0400
Subject: [PATCH 0489/1066] xhci: Remove excessive printks with shared IRQs.

If the xHCI host controller shares an interrupt line with another device,
the xHCI driver needs to check if the interrupt was generated by its
hardware.  Unfortunately, the user will see a ton of "Spurious interrupt."
lines if the other hardware interrupts often.  Lawrence found his dmesg
output cluttered with this output when the xHCI host shared an interrupt
with his i915 hardware.

Remove the warning, as sharing an interrupt is a normal thing.

This should be applied to the 2.6.36 stable tree.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Lawrence Rust <lvr@softsystem.co.uk>
Cc: stable@kernel.org
---
 drivers/usb/host/xhci-ring.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 9f3115e729b1..df558f6f84e3 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2104,7 +2104,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
 
 	if (!(status & STS_EINT)) {
 		spin_unlock(&xhci->lock);
-		xhci_warn(xhci, "Spurious interrupt.\n");
 		return IRQ_NONE;
 	}
 	xhci_dbg(xhci, "op reg status = %08x\n", status);

From 74bb844af8ec6a4c360b1fc7feb139801c0cacfd Mon Sep 17 00:00:00 2001
From: Andiry Xu <andiry.xu@amd.com>
Date: Wed, 27 Oct 2010 16:44:52 +0800
Subject: [PATCH 0490/1066] xHCI: release spinlock when setup interrupt

Jiri Slaby reports spinlock is held while calling kmalloc(GFP_KERNEL)
and request_irq() in xhci_resume().

Release the spinlock when setup interrupt.

Reported-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
---
 drivers/usb/host/xhci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 5d7d4e951ea4..7c8d70fbe113 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -714,6 +714,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		return retval;
 	}
 
+	spin_unlock_irq(&xhci->lock);
 	/* Re-setup MSI-X */
 	if (hcd->irq)
 		free_irq(hcd->irq, hcd);
@@ -736,6 +737,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		hcd->irq = pdev->irq;
 	}
 
+	spin_lock_irq(&xhci->lock);
 	/* step 4: set Run/Stop bit */
 	command = xhci_readl(xhci, &xhci->op_regs->command);
 	command |= CMD_RUN;

From dc07c91b9b4067022210e68d914a6890a4d70622 Mon Sep 17 00:00:00 2001
From: Andiry Xu <andiry.xu@amd.com>
Date: Thu, 11 Nov 2010 17:43:57 +0800
Subject: [PATCH 0491/1066] xHCI: fix wMaxPacketSize mask

USB2.0 spec 9.6.6 says: For all endpoints, bit 10..0 specify the maximum
packet size(in bytes).

So the wMaxPacketSize mask should be 0x7ff rather than 0x3ff.

This patch should be queued for the stable tree.  The bug in
xhci_endpoint_init() was present as far back as 2.6.31, and the bug in
xhci_get_max_esit_payload() was present when the function was introduced
in 2.6.34.

Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@kernel.org
---
 drivers/usb/host/xhci-mem.c | 4 ++--
 drivers/usb/host/xhci.h     | 5 +++++
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 202770676da3..d178761c3981 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1045,7 +1045,7 @@ static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
 	if (udev->speed == USB_SPEED_SUPER)
 		return ep->ss_ep_comp.wBytesPerInterval;
 
-	max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+	max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
 	max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
 	/* A 0 in max burst means 1 transfer per ESIT */
 	return max_packet * (max_burst + 1);
@@ -1135,7 +1135,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 		/* Fall through */
 	case USB_SPEED_FULL:
 	case USB_SPEED_LOW:
-		max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+		max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
 		ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
 		break;
 	default:
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 93d3bf4d213c..85e65647d445 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -621,6 +621,11 @@ struct xhci_ep_ctx {
 #define MAX_PACKET_MASK		(0xffff << 16)
 #define MAX_PACKET_DECODED(p)	(((p) >> 16) & 0xffff)
 
+/* Get max packet size from ep desc. Bit 10..0 specify the max packet size.
+ * USB2.0 spec 9.6.6.
+ */
+#define GET_MAX_PACKET(p)	((p) & 0x7ff)
+
 /* tx_info bitmasks */
 #define AVG_TRB_LENGTH_FOR_EP(p)	((p) & 0xffff)
 #define MAX_ESIT_PAYLOAD_FOR_EP(p)	(((p) & 0xffff) << 16)

From 47d3904fe40d62deee8cd46e79ca784e7a548acd Mon Sep 17 00:00:00 2001
From: Lawrence Rust <lvr@softsystem.co.uk>
Date: Wed, 27 Oct 2010 14:41:02 +0200
Subject: [PATCH 0492/1066] 8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang

Calling tcsetattr prevents any thread(s) currently suspended in ioctl
TIOCMIWAIT for the same device from ever resuming.

If a thread is suspended inside a call to ioctl TIOCMIWAIT, waiting for
a modem status change, then the 8250 driver enables modem status
interrupts (MSI).  The device interrupt service routine resumes the
suspended thread(s) on the next MSI.

If while the thread(s) are suspended, another thread calls tcsetattr
then the 8250 driver disables MSI (unless CTS/RTS handshaking is
enabled) thus preventing the suspended thread(s) from ever being
resumed.

This patch only disables MSI in tcsetattr handling if there are no
suspended threads.

Program to demonstrate bug & fix:

/* gcc miwait.c -o miwait -l pthread */
#include <stdio.h>
#include <errno.h>
#include <unistd.h>
#include <fcntl.h>
#include <pthread.h>
#include <termios.h>
#include <sys/ioctl.h>
#include <linux/serial.h>

static void* monitor( void* pv);
static int s_fd;

int main( void)
  {
  const char kszDev[] = "/dev/ttyS0";
  pthread_t t;
  struct termios tio;

  s_fd = open( kszDev, O_RDWR | O_NONBLOCK);
  if ( s_fd < 0)
    return fprintf( stderr, "Error(%d) opening %s: %s\n", errno, kszDev, strerror( errno)), 1;

  pthread_create( &t, NULL, &monitor, NULL);

  /* Modem status changes seen here */
  puts( "Main: awaiting status changes");
  sleep( 5);

  tcgetattr( s_fd, &tio);
  tio.c_cflag ^= CSTOPB;

  /* But not after here */
  puts( "Main: tcsetattr called");
  tcsetattr( s_fd, TCSANOW, &tio);

  for (;;)
    sleep( 1);
  }

static void* monitor( void* pv)
  {
  (void)pv;
  for(;;)
    {
    unsigned uModem;
    struct serial_icounter_struct cnt;

    if ( ioctl( s_fd, TIOCMGET, &uModem) < 0)
      fprintf( stderr, "Error(%d) in TIOCMGET: %s\n", errno, strerror( errno));
    printf( "Modem status:%s%s%s%s%s%s\n",
      (uModem & TIOCM_RTS) ? " RTS" : "",
      (uModem & TIOCM_DTR) ? " DTR" : "",
      (uModem & TIOCM_CTS) ? " CTS" : "",
      (uModem & TIOCM_DSR) ? " DSR" : "",
      (uModem & TIOCM_CD) ? " CD" : "",
      (uModem & TIOCM_RI) ? " RI" : ""
    );

    if ( ioctl( s_fd, TIOCGICOUNT, &cnt) < 0)
      fprintf( stderr, "Error(%d) in TIOCGICOUNT: %s\n", errno, strerror( errno));
    printf( "Irqs: CTS:%d DSR:%d RNG:%d DCD:%d Rx:%d Tx:%d Frame:%d Orun:%d Par:%d Brk:%d Oflow:%d\n",
      cnt.cts, cnt.dsr, cnt.rng, cnt.dcd,
      cnt.rx, cnt.tx, cnt.frame, cnt.overrun, cnt.parity,
      cnt.brk, cnt.buf_overrun
    );

    fputs( "Waiting...", stdout), fflush( stdout);
    if ( 0 > ioctl( s_fd, TIOCMIWAIT, (unsigned long)(TIOCM_CAR | TIOCM_RNG | TIOCM_DSR | TIOCM_CTS)))
      fprintf( stderr, "\nError(%d) in TIOCMIWAIT: %s\n", errno, strerror( errno));
    fputs( "\n", stdout);
    }
  return NULL;
  }

Signed-off by Lawrence Rust <lawrence@softsystem.co.uk>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/serial/8250.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 4d8e14b7aa93..dd5e1ac22251 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2343,8 +2343,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	/*
 	 * CTS flow control flag and modem status interrupts
+	 * Only disable MSI if no threads are waiting in
+	 * serial_core::uart_wait_modem_status
 	 */
-	up->ier &= ~UART_IER_MSI;
+	if (!waitqueue_active(&up->port.state->port.delta_msr_wait))
+		up->ier &= ~UART_IER_MSI;
 	if (!(up->bugs & UART_BUG_NOMSR) &&
 			UART_ENABLE_MS(&up->port, termios->c_cflag))
 		up->ier |= UART_IER_MSI;

From 37db8f91b7d9b064bc78acd1c615a410322e275d Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Thu, 28 Oct 2010 20:29:53 +0200
Subject: [PATCH 0493/1066] amiserial: Remove unused variable icount

drivers/char/amiserial.c: In function ?rs_ioctl?:
drivers/char/amiserial.c:1302: warning: unused variable ?icount?

commit 0587102cf9f427c185bfdeb2cef41e13ee0264b1 ("tty: icount changeover for
other main devices") removed the users, but not the actual variable.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/char/amiserial.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index b0a70461a12c..c0bd6f472c52 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -1299,7 +1299,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 {
 	struct async_struct * info = tty->driver_data;
 	struct async_icount cprev, cnow;	/* kernel counter temps */
-	struct serial_icounter_struct icount;
 	void __user *argp = (void __user *)arg;
 	unsigned long flags;
 

From 47c344d0bd290e04c57eefdb0a721726e53bb57e Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nicolas.pitre@canonical.com>
Date: Wed, 10 Nov 2010 01:33:12 -0500
Subject: [PATCH 0494/1066] vcs: make proper usage of the poll flags

Kay Sievers pointed out that usage of POLLIN is well defined by POSIX,
and the current usage here doesn't follow that definition.  So let's
duplicate the same semantics as implemented by sysfs_poll() instead.

Signed-off-by: Nicolas Pitre <nicolas.pitre@canonical.com>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/tty/vt/vc_screen.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c
index 273ab44cc91d..eab3a1ff99e4 100644
--- a/drivers/tty/vt/vc_screen.c
+++ b/drivers/tty/vt/vc_screen.c
@@ -553,12 +553,12 @@ static unsigned int
 vcs_poll(struct file *file, poll_table *wait)
 {
 	struct vcs_poll_data *poll = vcs_poll_data_get(file);
-	int ret = 0;
+	int ret = DEFAULT_POLLMASK|POLLERR|POLLPRI;
 
 	if (poll) {
 		poll_wait(file, &poll->waitq, wait);
-		if (!poll->seen_last_update)
-			ret = POLLIN | POLLRDNORM;
+		if (poll->seen_last_update)
+			ret = DEFAULT_POLLMASK;
 	}
 	return ret;
 }

From b6100992e31e61a2f252acb8df1f65c01f0b626d Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Wed, 27 Oct 2010 04:16:47 -0400
Subject: [PATCH 0495/1066] serial: bfin_5xx: always include DMA headers

On Blackfin systems, peripherals that have optional DMA support always
route their interrupts through the corresponding DMA channel -- even
when DMA is not being used.  So in PIO mode, we still need to request
the DMA channel (so interrupts are delivered) which means we need to
always include the DMA header for the DMA defines/functions.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/serial/bfin_5xx.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 351cc03578eb..c8ca3b43487d 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -23,6 +23,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
+#include <linux/dma-mapping.h>
 
 #if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
 	defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
@@ -33,12 +34,10 @@
 #include <asm/gpio.h>
 #include <mach/bfin_serial_5xx.h>
 
-#ifdef CONFIG_SERIAL_BFIN_DMA
-#include <linux/dma-mapping.h>
+#include <asm/dma.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/cacheflush.h>
-#endif
 
 #ifdef CONFIG_SERIAL_BFIN_MODULE
 # undef CONFIG_EARLY_PRINTK
@@ -688,6 +687,13 @@ static int bfin_serial_startup(struct uart_port *port)
 
 # ifdef CONFIG_BF54x
 	{
+		/*
+		 * UART2 and UART3 on BF548 share interrupt PINs and DMA
+		 * controllers with SPORT2 and SPORT3. UART rx and tx
+		 * interrupts are generated in PIO mode only when configure
+		 * their peripheral mapping registers properly, which means
+		 * request corresponding DMA channels in PIO mode as well.
+		 */
 		unsigned uart_dma_ch_rx, uart_dma_ch_tx;
 
 		switch (uart->port.irq) {

From 001a05d56edd9d82b27e69951fb9520f9ce6ed72 Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Wed, 27 Oct 2010 04:16:48 -0400
Subject: [PATCH 0496/1066] serial: bfin_5xx: remove redundant SSYNC to improve
 TX speed

We don't need to force a SSYNC here as the LSR register will already
be updated by the time we get back to reading it.  This speeds up TX
throughput and lowers general system overhead (since SSYNC is system
wide, not peripheral-specific).

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/serial/bfin_5xx.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index c8ca3b43487d..a454e427c949 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -359,7 +359,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 		UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		uart->port.icount.tx++;
-		SSYNC();
 	}
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)

From 6d9e44986891345636e2d6069c4ae1612b2337d4 Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Wed, 27 Oct 2010 04:16:49 -0400
Subject: [PATCH 0497/1066] serial: bfin_5xx: disable CON_PRINTBUFFER for
 consoles

If we are using early serial, don't let the normal console rewind
the log buffer, since that causes things to be printed multiple times.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/serial/bfin_5xx.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index a454e427c949..965532157c65 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -1324,6 +1324,14 @@ struct console __init *bfin_earlyserial_init(unsigned int port,
 	struct bfin_serial_port *uart;
 	struct ktermios t;
 
+#ifdef CONFIG_SERIAL_BFIN_CONSOLE
+	/*
+	 * If we are using early serial, don't let the normal console rewind
+	 * log buffer, since that causes things to be printed multiple times
+	 */
+	bfin_serial_console.flags &= ~CON_PRINTBUFFER;
+#endif
+
 	if (port == -1 || port >= nr_active_ports)
 		port = 0;
 	bfin_serial_init_ports();

From 5bb06b62bc445eed66fb256c3b5f86e5911797e4 Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Wed, 27 Oct 2010 04:16:50 -0400
Subject: [PATCH 0498/1066] serial: bfin_5xx: grab port lock before making port
 termios changes

The port lock exists to protect these resources, so we need to grab it
before making changes.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/serial/bfin_5xx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 965532157c65..19cac9f610fd 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -849,6 +849,8 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (termios->c_cflag & CMSPAR)
 		lcr |= STP;
 
+	spin_lock_irqsave(&uart->port.lock, flags);
+
 	port->read_status_mask = OE;
 	if (termios->c_iflag & INPCK)
 		port->read_status_mask |= (FE | PE);
@@ -878,8 +880,6 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (termios->c_line != N_IRDA)
 		quot -= ANOMALY_05000230;
 
-	spin_lock_irqsave(&uart->port.lock, flags);
-
 	UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
 
 	/* Disable UART */

From 820e62ef3d39ba9414dd9b87dba2eedd7e403e53 Mon Sep 17 00:00:00 2001
From: Ken Mills <ken.k.mills@intel.com>
Date: Thu, 4 Nov 2010 15:16:24 +0000
Subject: [PATCH 0499/1066] n_gsm: Copy n2 over when configuring via ioctl
 interface

The n2 field is settable but didn't get propogated

Signed-off-by: Ken Mills <ken.k.mills@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/tty/n_gsm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 04ef3ef0a422..7f79044ae996 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2375,6 +2375,7 @@ static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm,
 	gsm->mru = c->mru;
 	gsm->encoding = c->encapsulation;
 	gsm->adaption = c->adaption;
+	gsm->n2 = c->n2;
 
 	if (c->i == 1)
 		gsm->ftype = UIH;

From 40e3465db2cffd64e069ca82ee981025554bc159 Mon Sep 17 00:00:00 2001
From: Ken Mills <ken.k.mills@intel.com>
Date: Thu, 4 Nov 2010 15:16:42 +0000
Subject: [PATCH 0500/1066] n_gsm: Fix length handling

If the mux is configured with a large mru/mtu the existing code gets the
byte ordering wrong for the header.

Signed-off-by: Ken Mills <ken.k.mills@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/tty/n_gsm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 7f79044ae996..81b46585edf7 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -716,8 +716,8 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
 		if (msg->len < 128)
 			*--dp = (msg->len << 1) | EA;
 		else {
-			*--dp = (msg->len >> 6) | EA;
-			*--dp = (msg->len & 127) << 1;
+			*--dp = ((msg->len & 127) << 1) | EA;
+			*--dp = (msg->len >> 6) & 0xfe;
 		}
 	}
 

From e060e7af98182494b764d002eba7fa022fe91bdf Mon Sep 17 00:00:00 2001
From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Date: Thu, 11 Nov 2010 12:37:43 -0800
Subject: [PATCH 0501/1066] xen: set vma flag VM_PFNMAP in the privcmd mmap
 file_op

Set VM_PFNMAP in the privcmd mmap file_op, rather than later in
xen_remap_domain_mfn_range when it is too late because
vma_wants_writenotify has already been called and vm_page_prot has
already been modified.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/mmu.c          | 3 ++-
 drivers/xen/xenfs/privcmd.c | 5 +++--
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index f08ea045620f..792de4349c79 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -2299,7 +2299,8 @@ int xen_remap_domain_mfn_range(struct vm_area_struct *vma,
 
 	prot = __pgprot(pgprot_val(prot) | _PAGE_IOMAP);
 
-	vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
+	BUG_ON(!((vma->vm_flags & (VM_PFNMAP | VM_RESERVED | VM_IO)) ==
+				(VM_PFNMAP | VM_RESERVED | VM_IO)));
 
 	rmd.mfn = mfn;
 	rmd.prot = prot;
diff --git a/drivers/xen/xenfs/privcmd.c b/drivers/xen/xenfs/privcmd.c
index 2eb04c842511..88474d460d82 100644
--- a/drivers/xen/xenfs/privcmd.c
+++ b/drivers/xen/xenfs/privcmd.c
@@ -380,8 +380,9 @@ static int privcmd_mmap(struct file *file, struct vm_area_struct *vma)
 	if (xen_feature(XENFEAT_auto_translated_physmap))
 		return -ENOSYS;
 
-	/* DONTCOPY is essential for Xen as copy_page_range is broken. */
-	vma->vm_flags |= VM_RESERVED | VM_IO | VM_DONTCOPY;
+	/* DONTCOPY is essential for Xen because copy_page_range doesn't know
+	 * how to recreate these mappings */
+	vma->vm_flags |= VM_RESERVED | VM_IO | VM_DONTCOPY | VM_PFNMAP;
 	vma->vm_ops = &privcmd_vm_ops;
 	vma->vm_private_data = NULL;
 

From a1629c3b24f26ec1b0f534874af674a6b4c1540b Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Thu, 11 Nov 2010 15:24:06 -0800
Subject: [PATCH 0502/1066] ceph: fix dangling pointer

Clear fi->last_name when it's freed.  The only caller is rewinddir() (or
equivalent lseek).

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/dir.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index e0a2dc6fcafc..1e11ed716f85 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -414,6 +414,7 @@ static void reset_readdir(struct ceph_file_info *fi)
 		fi->last_readdir = NULL;
 	}
 	kfree(fi->last_name);
+	fi->last_name = NULL;
 	fi->next_offset = 2;  /* compensate for . and .. */
 	if (fi->dentry) {
 		dput(fi->dentry);

From d9bcbf343ec63e1104b5276195888ee06b4d086f Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Thu, 11 Nov 2010 17:32:25 +0100
Subject: [PATCH 0503/1066] mmc: fix rmmod race for hosts using card-detection
 polling

MMC hosts that poll for card detection by defining the MMC_CAP_NEEDS_POLL
flag have a race on rmmod, where the delayed work is cancelled without
waiting for completed polling. To prevent this a _sync version of the work
cancellation has to be used.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: <stable@kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 drivers/mmc/core/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 8f86d702e46e..31ae07a36576 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1559,7 +1559,7 @@ void mmc_stop_host(struct mmc_host *host)
 
 	if (host->caps & MMC_CAP_DISABLE)
 		cancel_delayed_work(&host->disable);
-	cancel_delayed_work(&host->detect);
+	cancel_delayed_work_sync(&host->detect);
 	mmc_flush_scheduled_work();
 
 	/* clear pm flags now and let card drivers set them as needed */

From 7b88dadc13e0004947de52df128dbd5b0754ed0a Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Thu, 11 Nov 2010 16:48:59 -0800
Subject: [PATCH 0504/1066] ceph: fix frag offset for non-leftmost frags

We start at offset 2 for the leftmost frag, and 0 for subsequent frags.
When we reach the end (rightmost), we go back to 2.  This fixes readdir on
fragmented (large) directories.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/dir.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 1e11ed716f85..5f67728ba4d7 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -336,7 +336,10 @@ more:
 		if (req->r_reply_info.dir_end) {
 			kfree(fi->last_name);
 			fi->last_name = NULL;
-			fi->next_offset = 2;
+			if (ceph_frag_is_rightmost(frag))
+				fi->next_offset = 2;
+			else
+				fi->next_offset = 0;
 		} else {
 			rinfo = &req->r_reply_info;
 			err = note_last_dentry(fi,

From ac5aa2e3332ec04889074afdbd1479424d0227a5 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Fri, 12 Nov 2010 08:26:06 +0100
Subject: [PATCH 0505/1066] netfilter: NF_HOOK_COND has wrong conditional

The NF_HOOK_COND returns 0 when it shouldn't due to what I believe to be an
error in the code as the order of operations is not what was intended.  C will
evalutate == before =.  Which means ret is getting set to the bool result,
rather than the return value of the function call.  The code says

if (ret = function() == 1)
when it meant to say:
if ((ret = function()) == 1)

Normally the compiler would warn, but it doesn't notice it because its
a actually complex conditional and so the wrong code is wrapped in an explict
set of () [exactly what the compiler wants you to do if this was intentional].
Fixing this means that errors when netfilter denies a packet get propagated
back up the stack rather than lost.

Problem introduced by commit 2249065f (netfilter: get rid of the grossness
in netfilter.h).

Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Patrick McHardy <kaber@trash.net>
---
 include/linux/netfilter.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index 89341c32631a..03317c8d4077 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -215,7 +215,7 @@ NF_HOOK_COND(uint8_t pf, unsigned int hook, struct sk_buff *skb,
 	int ret;
 
 	if (!cond ||
-	    (ret = nf_hook_thresh(pf, hook, skb, in, out, okfn, INT_MIN) == 1))
+	    ((ret = nf_hook_thresh(pf, hook, skb, in, out, okfn, INT_MIN)) == 1))
 		ret = okfn(skb);
 	return ret;
 }

From 22e091e5253da1e9ad7c0a82c2c84446fc403efe Mon Sep 17 00:00:00 2001
From: Shan Wei <shanwei@cn.fujitsu.com>
Date: Fri, 12 Nov 2010 08:51:55 +0100
Subject: [PATCH 0506/1066] netfilter: ipv6: fix overlap check for fragments

The type of FRAG6_CB(prev)->offset is int, skb->len is *unsigned* int,
and offset is int.

Without this patch, type conversion occurred to this expression, when
(FRAG6_CB(prev)->offset + prev->len) is less than offset.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
---
 net/ipv6/netfilter/nf_conntrack_reasm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 3a3f129a44cb..79d43aa8fa8d 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -286,7 +286,7 @@ found:
 
 	/* Check for overlap with preceding fragment. */
 	if (prev &&
-	    (NFCT_FRAG6_CB(prev)->offset + prev->len) - offset > 0)
+	    (NFCT_FRAG6_CB(prev)->offset + prev->len) > offset)
 		goto discard_fq;
 
 	/* Look for overlap with succeeding segment. */

From 6c0aca288e726405b01dacb12cac556454d34b2a Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker <fweisbec@gmail.com>
Date: Thu, 11 Nov 2010 21:18:43 +0100
Subject: [PATCH 0507/1066] x86: Ignore trap bits on single step exceptions

When a single step exception fires, the trap bits, used to
signal hardware breakpoints, are in a random state.

These trap bits might be set if another exception will follow,
like a breakpoint in the next instruction, or a watchpoint in the
previous one. Or there can be any junk there.

So if we handle these trap bits during the single step exception,
we are going to handle an exception twice, or we are going to
handle junk.

Just ignore them in this case.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=21332

Reported-by: Michael Stefaniuc <mstefani@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: Alexandre Julliard <julliard@winehq.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: All since 2.6.33.x <stable@kernel.org>
---
 arch/x86/kernel/hw_breakpoint.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
index ff15c9dcc25d..42c594254507 100644
--- a/arch/x86/kernel/hw_breakpoint.c
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -433,6 +433,10 @@ static int __kprobes hw_breakpoint_handler(struct die_args *args)
 	dr6_p = (unsigned long *)ERR_PTR(args->err);
 	dr6 = *dr6_p;
 
+	/* If it's a single step, TRAP bits are random */
+	if (dr6 & DR_STEP)
+		return NOTIFY_DONE;
+
 	/* Do an early return if no trap bits are set in DR6 */
 	if ((dr6 & DR_TRAP_BITS) == 0)
 		return NOTIFY_DONE;

From 3c502e7a0255d82621ff25d60cc816624830497e Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Thu, 4 Nov 2010 17:33:01 -0500
Subject: [PATCH 0508/1066] perf,hw_breakpoint: Initialize hardware api earlier

When using early debugging, the kernel does not initialize the
hw_breakpoint API early enough and causes the late initialization of
the kernel debugger to fail. The boot arguments are:

    earlyprintk=vga ekgdboc=kbd kgdbwait

Then simply type "go" at the kdb prompt and boot. The kernel will
later emit the message:

    kgdb: Could not allocate hwbreakpoints

And at that point the kernel debugger will cease to work correctly.

The solution is to initialize the hw_breakpoint at the same time that
all the other perf call backs are initialized instead of using a
core_initcall() initialization which happens well after the kernel
debugger can make use of hardware breakpoints.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4CD3396D.1090308@windriver.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 include/linux/hw_breakpoint.h | 4 ++++
 kernel/hw_breakpoint.c        | 3 +--
 kernel/perf_event.c           | 6 ++++++
 3 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h
index a2d6ea49ec56..d1e55fed2c7d 100644
--- a/include/linux/hw_breakpoint.h
+++ b/include/linux/hw_breakpoint.h
@@ -33,6 +33,8 @@ enum bp_type_idx {
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 
+extern int __init init_hw_breakpoint(void);
+
 static inline void hw_breakpoint_init(struct perf_event_attr *attr)
 {
 	memset(attr, 0, sizeof(*attr));
@@ -108,6 +110,8 @@ static inline struct arch_hw_breakpoint *counter_arch_bp(struct perf_event *bp)
 
 #else /* !CONFIG_HAVE_HW_BREAKPOINT */
 
+static inline int __init init_hw_breakpoint(void) { return 0; }
+
 static inline struct perf_event *
 register_user_hw_breakpoint(struct perf_event_attr *attr,
 			    perf_overflow_handler_t triggered,
diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c
index 2c9120f0afca..e5325825aeb6 100644
--- a/kernel/hw_breakpoint.c
+++ b/kernel/hw_breakpoint.c
@@ -620,7 +620,7 @@ static struct pmu perf_breakpoint = {
 	.read		= hw_breakpoint_pmu_read,
 };
 
-static int __init init_hw_breakpoint(void)
+int __init init_hw_breakpoint(void)
 {
 	unsigned int **task_bp_pinned;
 	int cpu, err_cpu;
@@ -655,6 +655,5 @@ static int __init init_hw_breakpoint(void)
 
 	return -ENOMEM;
 }
-core_initcall(init_hw_breakpoint);
 
 
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 517d827f4982..05b7d8c72c6c 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -31,6 +31,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/perf_event.h>
 #include <linux/ftrace_event.h>
+#include <linux/hw_breakpoint.h>
 
 #include <asm/irq_regs.h>
 
@@ -6295,6 +6296,8 @@ perf_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu)
 
 void __init perf_event_init(void)
 {
+	int ret;
+
 	perf_event_init_all_cpus();
 	init_srcu_struct(&pmus_srcu);
 	perf_pmu_register(&perf_swevent);
@@ -6302,4 +6305,7 @@ void __init perf_event_init(void)
 	perf_pmu_register(&perf_task_clock);
 	perf_tp_register();
 	perf_cpu_notifier(perf_cpu_notify);
+
+	ret = init_hw_breakpoint();
+	WARN(ret, "hw_breakpoint initialization failed with: %d", ret);
 }

From 9395f6ea3c61d80ccc7a13668d27afbb8d9436ba Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Thu, 11 Nov 2010 23:10:30 +0000
Subject: [PATCH 0509/1066] ARM: GIC: don't disable software generated
 interrupts

Software generated interrupts (SGI) are used for IPIs by the kernel.
While previous revisions of the GIC hardware were specified not to
implement enable bits for SGIs, more recent hardware is now permitted
to implement these bits in a per-CPU banked register.

The priority registers for the PPI and SGIs are also per-CPU banked
registers, so ensure that these are also appropriately initialized.

Reported-by: Scott Valentine <svalentine@concentris-systems.com>
Acked-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/gic.c | 28 ++++++++++++++++++++++++----
 1 file changed, 24 insertions(+), 4 deletions(-)

diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index ada6359160eb..772f95f1aecd 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -251,15 +251,16 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
 		writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
 
 	/*
-	 * Set priority on all interrupts.
+	 * Set priority on all global interrupts.
 	 */
-	for (i = 0; i < max_irq; i += 4)
+	for (i = 32; i < max_irq; i += 4)
 		writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
 
 	/*
-	 * Disable all interrupts.
+	 * Disable all interrupts.  Leave the PPI and SGIs alone
+	 * as these enables are banked registers.
 	 */
-	for (i = 0; i < max_irq; i += 32)
+	for (i = 32; i < max_irq; i += 32)
 		writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
 
 	/*
@@ -277,11 +278,30 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
 
 void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
 {
+	void __iomem *dist_base;
+	int i;
+
 	if (gic_nr >= MAX_GIC_NR)
 		BUG();
 
+	dist_base = gic_data[gic_nr].dist_base;
+	BUG_ON(!dist_base);
+
 	gic_data[gic_nr].cpu_base = base;
 
+	/*
+	 * Deal with the banked PPI and SGI interrupts - disable all
+	 * PPI interrupts, ensure all SGI interrupts are enabled.
+	 */
+	writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
+	writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
+
+	/*
+	 * Set priority on PPI and SGI interrupts
+	 */
+	for (i = 0; i < 32; i += 4)
+		writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+
 	writel(0xf0, base + GIC_CPU_PRIMASK);
 	writel(1, base + GIC_CPU_CTRL);
 }

From 8818b6719f1ecfdc1f27761704d0c9e2cbc48250 Mon Sep 17 00:00:00 2001
From: Richard Weinberger <richard@nod.at>
Date: Thu, 11 Nov 2010 14:05:04 -0800
Subject: [PATCH 0510/1066] um: fix ptrace build error

Both commits 0a3d763f1a68 ("ptrace: cleanup arch_ptrace() on um") and
9b05a69e0534 ("ptrace: change signature of arch_ptrace()") broke the um
build.  This patch fixes the issues.

0a3d763f1a68 introduced the undeclared variable "datavp".  The patch seems
completely untested.  :-(

9b05a69e0534 changed arch_ptrace()'s signature but did not update
um/include/asm/ptrace-generic.h.

Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Jeff Dike <jdike@addtoit.com>
Tested-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/include/asm/ptrace-generic.h | 4 ++--
 arch/um/kernel/ptrace.c              | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h
index 2cd899f75a3c..b7c5bab9bd77 100644
--- a/arch/um/include/asm/ptrace-generic.h
+++ b/arch/um/include/asm/ptrace-generic.h
@@ -38,8 +38,8 @@ struct pt_regs {
 
 struct task_struct;
 
-extern long subarch_ptrace(struct task_struct *child, long request, long addr,
-			   long data);
+extern long subarch_ptrace(struct task_struct *child, long request,
+	unsigned long addr, unsigned long data);
 extern unsigned long getreg(struct task_struct *child, int regno);
 extern int putreg(struct task_struct *child, int regno, unsigned long value);
 extern int get_fpregs(struct user_i387_struct __user *buf,
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index a5e33f29bbeb..701b672c1122 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -122,7 +122,7 @@ long arch_ptrace(struct task_struct *child, long request,
 		break;
 
 	case PTRACE_SET_THREAD_AREA:
-		ret = ptrace_set_thread_area(child, addr, datavp);
+		ret = ptrace_set_thread_area(child, addr, vp);
 		break;
 
 	case PTRACE_FAULTINFO: {

From 38b7a2ae0ad3e29e1881b82c0f421ba5db148e3d Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Thu, 11 Nov 2010 14:05:06 -0800
Subject: [PATCH 0511/1066] drivers/macintosh/adb-iop.c: flags should be
 unsigned long
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fix these warnings:

  drivers/macintosh/adb-iop.c: In function `adb_iop_complete':
  drivers/macintosh/adb-iop.c:85: warning: comparison of distinct pointer types lacks a cast
  drivers/macintosh/adb-iop.c:92: warning: comparison of distinct pointer types lacks a cast
  drivers/macintosh/adb-iop.c: In function ¡adb_iop_listen¢:
  drivers/macintosh/adb-iop.c:111: warning: comparison of distinct pointer types lacks a cast
  drivers/macintosh/adb-iop.c:151: warning: comparison of distinct pointer types lacks a cast

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/macintosh/adb-iop.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/macintosh/adb-iop.c b/drivers/macintosh/adb-iop.c
index 444696625171..f5f4da3d0b67 100644
--- a/drivers/macintosh/adb-iop.c
+++ b/drivers/macintosh/adb-iop.c
@@ -80,7 +80,7 @@ static void adb_iop_end_req(struct adb_request *req, int state)
 static void adb_iop_complete(struct iop_msg *msg)
 {
 	struct adb_request *req;
-	uint flags;
+	unsigned long flags;
 
 	local_irq_save(flags);
 
@@ -103,7 +103,7 @@ static void adb_iop_listen(struct iop_msg *msg)
 {
 	struct adb_iopmsg *amsg = (struct adb_iopmsg *) msg->message;
 	struct adb_request *req;
-	uint flags;
+	unsigned long flags;
 #ifdef DEBUG_ADB_IOP
 	int i;
 #endif

From 88cf81fc8944a6892db104caaa490885d48b959c Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Thu, 11 Nov 2010 14:05:07 -0800
Subject: [PATCH 0512/1066] rapidio: use resource_size()

The size calculation is done incorrectly here because it should include
both the start and end (end - start + 1).  It's easiest to just use
resource_size() which does the right thing.

I was worried there was something non-standard going on because the
printk() subtracts "end - 1", but the rest of the file uses the normal
resource size calculations.  This function is only called from
fsl_rio_setup() in arch/powerpc/sysdev/fsl_rio.c and the calculation
there is also:

	port->iores.start = law_start;
	port->iores.end = law_start + law_size - 1;

So I think this is the correct fix.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Acked-by: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rapidio/rio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 68cf0c99138a..7b5080c45569 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -1159,11 +1159,11 @@ int __devinit rio_init_mports(void)
 
 	list_for_each_entry(port, &rio_mports, node) {
 		if (!request_mem_region(port->iores.start,
-					port->iores.end - port->iores.start,
+					resource_size(&port->iores),
 					port->name)) {
 			printk(KERN_ERR
 			       "RIO: Error requesting master port region 0x%016llx-0x%016llx\n",
-			       (u64)port->iores.start, (u64)port->iores.end - 1);
+			       (u64)port->iores.start, (u64)port->iores.end);
 			rc = -ENOMEM;
 			goto out;
 		}

From 8705a1baf78287eceeb00bc29401d0ae6a03f213 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Thu, 11 Nov 2010 14:05:07 -0800
Subject: [PATCH 0513/1066] include/linux/resource.h needs types.h

Fix the following warning:
usr/include/linux/resource.h:49: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/resource.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/resource.h b/include/linux/resource.h
index 88d36f9145ba..d01c96c1966e 100644
--- a/include/linux/resource.h
+++ b/include/linux/resource.h
@@ -2,6 +2,7 @@
 #define _LINUX_RESOURCE_H
 
 #include <linux/time.h>
+#include <linux/types.h>
 
 /*
  * Resource control/accounting header file for linux

From 3f9d35b9514da6757ca98831372518f9eeb71b33 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Thu, 11 Nov 2010 14:05:08 -0800
Subject: [PATCH 0514/1066] atomic: add atomic_inc_not_zero_hint()

Followup of perf tools session in Netfilter WorkShop 2010

In the network stack we make high usage of atomic_inc_not_zero() in
contexts we know the probable value of atomic before increment (2 for udp
sockets for example)

Using a special version of atomic_inc_not_zero() giving this hint can help
processor to use less bus transactions.

On x86 (MESI protocol) for example, this avoids entering Shared state,
because "lock cmpxchg" issues an RFO (Read For Ownership)

akpm: Adds a new include/linux/atomic.h.  This means that new code should
henceforth include linux/atomic.h and not asm/atomic.h.  The presence of
include/linux/atomic.h will in fact cause checkpatch.pl to warn about use
of asm/atomic.h.  The new include/linux/atomic.h becomes the place where
arch-neutral atomic_t code should be placed.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: David Miller <davem@davemloft.net>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/atomic.h | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 include/linux/atomic.h

diff --git a/include/linux/atomic.h b/include/linux/atomic.h
new file mode 100644
index 000000000000..96c038e43d66
--- /dev/null
+++ b/include/linux/atomic.h
@@ -0,0 +1,37 @@
+#ifndef _LINUX_ATOMIC_H
+#define _LINUX_ATOMIC_H
+#include <asm/atomic.h>
+
+/**
+ * atomic_inc_not_zero_hint - increment if not null
+ * @v: pointer of type atomic_t
+ * @hint: probable value of the atomic before the increment
+ *
+ * This version of atomic_inc_not_zero() gives a hint of probable
+ * value of the atomic. This helps processor to not read the memory
+ * before doing the atomic read/modify/write cycle, lowering
+ * number of bus transactions on some arches.
+ *
+ * Returns: 0 if increment was not done, 1 otherwise.
+ */
+#ifndef atomic_inc_not_zero_hint
+static inline int atomic_inc_not_zero_hint(atomic_t *v, int hint)
+{
+	int val, c = hint;
+
+	/* sanity test, should be removed by compiler if hint is a constant */
+	if (!hint)
+		return atomic_inc_not_zero(v);
+
+	do {
+		val = atomic_cmpxchg(v, c, c + 1);
+		if (val == c)
+			return 1;
+		c = val;
+	} while (c);
+
+	return 0;
+}
+#endif
+
+#endif /* _LINUX_ATOMIC_H */

From 43b3a0c732776746f53d8ed2ba659583fc1692aa Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Thu, 11 Nov 2010 14:05:10 -0800
Subject: [PATCH 0515/1066] include/linux/highmem.h needs hardirq.h

Commit 3e4d3af501cc ("mm: stack based kmap_atomic()") introduced the
kmap_atomic_idx_push() function which warns on in_irq() with
CONFIG_DEBUG_HIGHMEM enabled.  This patch includes linux/hardirq.h for
the in_irq definition.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/highmem.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/highmem.h b/include/linux/highmem.h
index e9138198e823..b676c585574e 100644
--- a/include/linux/highmem.h
+++ b/include/linux/highmem.h
@@ -5,6 +5,7 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/uaccess.h>
+#include <linux/hardirq.h>
 
 #include <asm/cacheflush.h>
 

From 90482e45e4a39ee10b66436c2b3d5d4d88c2f73c Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Thu, 11 Nov 2010 14:05:11 -0800
Subject: [PATCH 0516/1066] misc/isl29020: signedness bug in
 als_sensing_range_store()

"ret_val" is supposed to be signed here or the error handling breaks.
Also we should check the return value from i2c_smbus_read_byte_data().

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/isl29020.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/isl29020.c b/drivers/misc/isl29020.c
index 34fe835921c4..ca47e6285075 100644
--- a/drivers/misc/isl29020.c
+++ b/drivers/misc/isl29020.c
@@ -87,7 +87,7 @@ static ssize_t als_sensing_range_store(struct device *dev,
 		struct device_attribute *attr, const  char *buf, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	unsigned int ret_val;
+	int ret_val;
 	unsigned long val;
 
 	if (strict_strtoul(buf, 10, &val))
@@ -106,6 +106,8 @@ static ssize_t als_sensing_range_store(struct device *dev,
 		val = 4;
 
 	ret_val = i2c_smbus_read_byte_data(client, 0x00);
+	if (ret_val < 0)
+		return ret_val;
 
 	ret_val &= 0xFC; /*reset the bit before setting them */
 	ret_val |= val - 1;

From 1093736b3c34319b8f1825a4423414d9cf397d73 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segooon@gmail.com>
Date: Thu, 11 Nov 2010 14:05:11 -0800
Subject: [PATCH 0517/1066] drivers/misc/apds9802als.c: fix signedness bug

i2c_smbus_read_byte_data() may return negative error code.  This is not
seen to als_sensing_range_store() as the result is stored in unsigned int.

Made it signed.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Cc: Hong Liu <hong.liu@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Anantha Narayanan <anantha.narayanan@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/apds9802als.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/apds9802als.c b/drivers/misc/apds9802als.c
index f9b91ba8900c..0ed09358027e 100644
--- a/drivers/misc/apds9802als.c
+++ b/drivers/misc/apds9802als.c
@@ -123,7 +123,7 @@ static ssize_t als_sensing_range_store(struct device *dev,
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct als_data *data = i2c_get_clientdata(client);
-	unsigned int ret_val;
+	int ret_val;
 	unsigned long val;
 
 	if (strict_strtoul(buf, 10, &val))

From d2e61b8dc99fdb36e0fd176e25365f69afda4ff9 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Thu, 11 Nov 2010 14:05:12 -0800
Subject: [PATCH 0518/1066] memcg: null dereference on allocation failure

The original code had a null dereference if alloc_percpu() failed.  This
was introduced in commit 711d3d2c9bc3 ("memcg: cpu hotplug aware percpu
count updates")

Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 9a99cfaf0a19..2efa8ea07ff7 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -4208,15 +4208,17 @@ static struct mem_cgroup *mem_cgroup_alloc(void)
 
 	memset(mem, 0, size);
 	mem->stat = alloc_percpu(struct mem_cgroup_stat_cpu);
-	if (!mem->stat) {
-		if (size < PAGE_SIZE)
-			kfree(mem);
-		else
-			vfree(mem);
-		mem = NULL;
-	}
+	if (!mem->stat)
+		goto out_free;
 	spin_lock_init(&mem->pcp_counter_lock);
 	return mem;
+
+out_free:
+	if (size < PAGE_SIZE)
+		kfree(mem);
+	else
+		vfree(mem);
+	return NULL;
 }
 
 /*

From aec04288904a7308f2900926902040e7a69ae2be Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Thu, 11 Nov 2010 14:05:13 -0800
Subject: [PATCH 0519/1066] drivers/misc/bh1770glc.c: error handling in
 bh1770_power_state_store()

There was a signedness bug so "ret" was never less than zero and that
breaks the error handling.  Also in the original code it would overwrite
ret and the result is still negative but it's bogus number instead of the
correct error code.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/bh1770glc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/bh1770glc.c b/drivers/misc/bh1770glc.c
index cee632e645e1..d79a972f2c79 100644
--- a/drivers/misc/bh1770glc.c
+++ b/drivers/misc/bh1770glc.c
@@ -649,7 +649,7 @@ static ssize_t bh1770_power_state_store(struct device *dev,
 {
 	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 	unsigned long value;
-	size_t ret;
+	ssize_t ret;
 
 	if (strict_strtoul(buf, 0, &value))
 		return -EINVAL;
@@ -659,8 +659,12 @@ static ssize_t bh1770_power_state_store(struct device *dev,
 		pm_runtime_get_sync(dev);
 
 		ret = bh1770_lux_rate(chip, chip->lux_rate_index);
-		ret |= bh1770_lux_interrupt_control(chip, BH1770_ENABLE);
+		if (ret < 0) {
+			pm_runtime_put(dev);
+			goto leave;
+		}
 
+		ret = bh1770_lux_interrupt_control(chip, BH1770_ENABLE);
 		if (ret < 0) {
 			pm_runtime_put(dev);
 			goto leave;

From 834b40380e93e36f1c9b48ec1d280cebe3d7bd8c Mon Sep 17 00:00:00 2001
From: Alexey Khoroshilov <khoroshilov@ispras.ru>
Date: Thu, 11 Nov 2010 14:05:14 -0800
Subject: [PATCH 0520/1066] kernel/range.c: fix clean_sort_range() for the case
 of full array

clean_sort_range() should return a number of nonempty elements of range
array, but if the array is full clean_sort_range() returns 0.

The problem is that the number of nonempty elements is evaluated by
finding the first empty element of the array.  If there is no such element
it returns an initial value of local variable nr_range that is zero.

The fix is trivial: it changes initial value of nr_range to size of the
array.

The bug can lead to loss of information regarding all ranges, since
typically returned value of clean_sort_range() is considered as an actual
number of ranges in the array after a series of add/subtract operations.

Found by Analytical Verification project of Linux Verification Center
(linuxtesting.org), thanks to Alexander Kolosov.

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/range.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/range.c b/kernel/range.c
index 471b66acabb5..37fa9b99ad58 100644
--- a/kernel/range.c
+++ b/kernel/range.c
@@ -119,7 +119,7 @@ static int cmp_range(const void *x1, const void *x2)
 
 int clean_sort_range(struct range *range, int az)
 {
-	int i, j, k = az - 1, nr_range = 0;
+	int i, j, k = az - 1, nr_range = az;
 
 	for (i = 0; i < k; i++) {
 		if (range[i].end)

From 8d056cb965b8fb7c53c564abf28b1962d1061cd3 Mon Sep 17 00:00:00 2001
From: Dave Hansen <dave@linux.vnet.ibm.com>
Date: Thu, 11 Nov 2010 14:05:15 -0800
Subject: [PATCH 0521/1066] mm/vfs: revalidate page->mapping in
 do_generic_file_read()

70 hours into some stress tests of a 2.6.32-based enterprise kernel, we
ran into a NULL dereference in here:

	int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
	                                        unsigned long from)
	{
---->		struct inode *inode = page->mapping->host;

It looks like page->mapping was the culprit.  (xmon trace is below).
After closer examination, I realized that do_generic_file_read() does a
find_get_page(), and eventually locks the page before calling
block_is_partially_uptodate().  However, it doesn't revalidate the
page->mapping after the page is locked.  So, there's a small window
between the find_get_page() and ->is_partially_uptodate() where the page
could get truncated and page->mapping cleared.

We _have_ a reference, so it can't get reclaimed, but it certainly
can be truncated.

I think the correct thing is to check page->mapping after the
trylock_page(), and jump out if it got truncated.  This patch has been
running in the test environment for a month or so now, and we have not
seen this bug pop up again.

xmon info:

  1f:mon> e
  cpu 0x1f: Vector: 300 (Data Access) at [c0000002ae36f770]
      pc: c0000000001e7a6c: .block_is_partially_uptodate+0xc/0x100
      lr: c000000000142944: .generic_file_aio_read+0x1e4/0x770
      sp: c0000002ae36f9f0
     msr: 8000000000009032
     dar: 0
   dsisr: 40000000
    current = 0xc000000378f99e30
    paca    = 0xc000000000f66300
      pid   = 21946, comm = bash
  1f:mon> r
  R00 = 0025c0500000006d   R16 = 0000000000000000
  R01 = c0000002ae36f9f0   R17 = c000000362cd3af0
  R02 = c000000000e8cd80   R18 = ffffffffffffffff
  R03 = c0000000031d0f88   R19 = 0000000000000001
  R04 = c0000002ae36fa68   R20 = c0000003bb97b8a0
  R05 = 0000000000000000   R21 = c0000002ae36fa68
  R06 = 0000000000000000   R22 = 0000000000000000
  R07 = 0000000000000001   R23 = c0000002ae36fbb0
  R08 = 0000000000000002   R24 = 0000000000000000
  R09 = 0000000000000000   R25 = c000000362cd3a80
  R10 = 0000000000000000   R26 = 0000000000000002
  R11 = c0000000001e7b60   R27 = 0000000000000000
  R12 = 0000000042000484   R28 = 0000000000000001
  R13 = c000000000f66300   R29 = c0000003bb97b9b8
  R14 = 0000000000000001   R30 = c000000000e28a08
  R15 = 000000000000ffff   R31 = c0000000031d0f88
  pc  = c0000000001e7a6c .block_is_partially_uptodate+0xc/0x100
  lr  = c000000000142944 .generic_file_aio_read+0x1e4/0x770
  msr = 8000000000009032   cr  = 22000488
  ctr = c0000000001e7a60   xer = 0000000020000000   trap =  300
  dar = 0000000000000000   dsisr = 40000000
  1f:mon> t
  [link register   ] c000000000142944 .generic_file_aio_read+0x1e4/0x770
  [c0000002ae36f9f0] c000000000142a14 .generic_file_aio_read+0x2b4/0x770 (unreliable)
  [c0000002ae36fb40] c0000000001b03e4 .do_sync_read+0xd4/0x160
  [c0000002ae36fce0] c0000000001b153c .vfs_read+0xec/0x1f0
  [c0000002ae36fd80] c0000000001b1768 .SyS_read+0x58/0xb0
  [c0000002ae36fe30] c00000000000852c syscall_exit+0x0/0x40
  --- Exception: c00 (System Call) at 00000080a840bc54
  SP (fffca15df30) is in userspace
  1f:mon> di c0000000001e7a6c
  c0000000001e7a6c  e9290000      ld      r9,0(r9)
  c0000000001e7a70  418200c0      beq     c0000000001e7b30        # .block_is_partially_uptodate+0xd0/0x100
  c0000000001e7a74  e9440008      ld      r10,8(r4)
  c0000000001e7a78  78a80020      clrldi  r8,r5,32
  c0000000001e7a7c  3c000001      lis     r0,1
  c0000000001e7a80  812900a8      lwz     r9,168(r9)
  c0000000001e7a84  39600001      li      r11,1
  c0000000001e7a88  7c080050      subf    r0,r8,r0
  c0000000001e7a8c  7f805040      cmplw   cr7,r0,r10
  c0000000001e7a90  7d6b4830      slw     r11,r11,r9
  c0000000001e7a94  796b0020      clrldi  r11,r11,32
  c0000000001e7a98  419d00a8      bgt     cr7,c0000000001e7b40    # .block_is_partially_uptodate+0xe0/0x100
  c0000000001e7a9c  7fa55840      cmpld   cr7,r5,r11
  c0000000001e7aa0  7d004214      add     r8,r0,r8
  c0000000001e7aa4  79080020      clrldi  r8,r8,32
  c0000000001e7aa8  419c0078      blt     cr7,c0000000001e7b20    # .block_is_partially_uptodate+0xc0/0x100

Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: <arunabal@in.ibm.com>
Cc: <sbest@us.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/filemap.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/mm/filemap.c b/mm/filemap.c
index 61ba5e405791..4ee2e998e937 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1029,6 +1029,9 @@ find_page:
 				goto page_not_up_to_date;
 			if (!trylock_page(page))
 				goto page_not_up_to_date;
+			/* Did it get truncated before we got the lock? */
+			if (!page->mapping)
+				goto page_not_up_to_date_locked;
 			if (!mapping->a_ops->is_partially_uptodate(page,
 								desc, offset))
 				goto page_not_up_to_date_locked;

From 38715258aa2e8cd94bd4aafadc544e5104efd551 Mon Sep 17 00:00:00 2001
From: Ken Chen <kenchen@google.com>
Date: Thu, 11 Nov 2010 14:05:16 -0800
Subject: [PATCH 0522/1066] latencytop: fix per task accumulator

Per task latencytop accumulator prematurely terminates due to erroneous
placement of latency_record_count.  It should be incremented whenever a
new record is allocated instead of increment on every latencytop event.

Also fix search iterator to only search known record events instead of
blindly searching all pre-allocated space.

Signed-off-by: Ken Chen <kenchen@google.com>
Reviewed-by: Arjan van de Ven <arjan@infradead.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/latencytop.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/kernel/latencytop.c b/kernel/latencytop.c
index 877fb306d415..17110a4a4fc2 100644
--- a/kernel/latencytop.c
+++ b/kernel/latencytop.c
@@ -194,14 +194,7 @@ __account_scheduler_latency(struct task_struct *tsk, int usecs, int inter)
 
 	account_global_scheduler_latency(tsk, &lat);
 
-	/*
-	 * short term hack; if we're > 32 we stop; future we recycle:
-	 */
-	tsk->latency_record_count++;
-	if (tsk->latency_record_count >= LT_SAVECOUNT)
-		goto out_unlock;
-
-	for (i = 0; i < LT_SAVECOUNT; i++) {
+	for (i = 0; i < tsk->latency_record_count; i++) {
 		struct latency_record *mylat;
 		int same = 1;
 
@@ -227,8 +220,14 @@ __account_scheduler_latency(struct task_struct *tsk, int usecs, int inter)
 		}
 	}
 
+	/*
+	 * short term hack; if we're > 32 we stop; future we recycle:
+	 */
+	if (tsk->latency_record_count >= LT_SAVECOUNT)
+		goto out_unlock;
+
 	/* Allocated a new one: */
-	i = tsk->latency_record_count;
+	i = tsk->latency_record_count++;
 	memcpy(&tsk->latency_record[i], &lat, sizeof(struct latency_record));
 
 out_unlock:

From 1dce071e18b7264457d17c0dec4c7e430bfaee7d Mon Sep 17 00:00:00 2001
From: Shaohua Li <shaohua.li@intel.com>
Date: Thu, 11 Nov 2010 14:05:17 -0800
Subject: [PATCH 0523/1066] vmscan: avoid setting zone congested if no page
 dirty

nr_dirty and nr_congested are increased only when the page is dirty.  So
if all pages are clean, both them will be zero.  In this case, we should
not mark the zone congested.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/vmscan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/vmscan.c b/mm/vmscan.c
index b8a6fdc21312..d31d7ce52c0e 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -913,7 +913,7 @@ keep_lumpy:
 	 * back off and wait for congestion to clear because further reclaim
 	 * will encounter the same problem
 	 */
-	if (nr_dirty == nr_congested)
+	if (nr_dirty == nr_congested && nr_dirty != 0)
 		zone_set_flag(zone, ZONE_CONGESTED);
 
 	free_page_list(&free_pages);

From 203f40a5a030ed4048cd40e3bd9ab5df6c5df589 Mon Sep 17 00:00:00 2001
From: David Rientjes <rientjes@google.com>
Date: Thu, 11 Nov 2010 14:05:18 -0800
Subject: [PATCH 0524/1066] oom: document obsolete oom_adj tunable

/proc/pid/oom_adj was deprecated in August 2010 with the introduction of
the new oom killer heuristic.

This patch copies the Documentation/feature-removal-schedule.txt entry for
this tunable to the Documentation/ABI/obsolete directory so nobody misses
it.

Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/ABI/obsolete/proc-pid-oom_adj | 22 +++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/ABI/obsolete/proc-pid-oom_adj

diff --git a/Documentation/ABI/obsolete/proc-pid-oom_adj b/Documentation/ABI/obsolete/proc-pid-oom_adj
new file mode 100644
index 000000000000..cf63f264ce0f
--- /dev/null
+++ b/Documentation/ABI/obsolete/proc-pid-oom_adj
@@ -0,0 +1,22 @@
+What:	/proc/<pid>/oom_adj
+When:	August 2012
+Why:	/proc/<pid>/oom_adj allows userspace to influence the oom killer's
+	badness heuristic used to determine which task to kill when the kernel
+	is out of memory.
+
+	The badness heuristic has since been rewritten since the introduction of
+	this tunable such that its meaning is deprecated.  The value was
+	implemented as a bitshift on a score generated by the badness()
+	function that did not have any precise units of measure.  With the
+	rewrite, the score is given as a proportion of available memory to the
+	task allocating pages, so using a bitshift which grows the score
+	exponentially is, thus, impossible to tune with fine granularity.
+
+	A much more powerful interface, /proc/<pid>/oom_score_adj, was
+	introduced with the oom killer rewrite that allows users to increase or
+	decrease the badness() score linearly.  This interface will replace
+	/proc/<pid>/oom_adj.
+
+	A warning will be emitted to the kernel log if an application uses this
+	deprecated interface.  After it is printed once, future warnings will be
+	suppressed until the kernel is rebooted.

From eaf06b241b091357e72b76863ba16e89610d31bd Mon Sep 17 00:00:00 2001
From: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Thu, 11 Nov 2010 14:05:18 -0800
Subject: [PATCH 0525/1066] Restrict unprivileged access to kernel syslog

The kernel syslog contains debugging information that is often useful
during exploitation of other vulnerabilities, such as kernel heap
addresses.  Rather than futilely attempt to sanitize hundreds (or
thousands) of printk statements and simultaneously cripple useful
debugging functionality, it is far simpler to create an option that
prevents unprivileged users from reading the syslog.

This patch, loosely based on grsecurity's GRKERNSEC_DMESG, creates the
dmesg_restrict sysctl.  When set to "0", the default, no restrictions are
enforced.  When set to "1", only users with CAP_SYS_ADMIN can read the
kernel syslog via dmesg(8) or other mechanisms.

[akpm@linux-foundation.org: explain the config option in kernel.txt]
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Eugene Teo <eugeneteo@kernel.org>
Acked-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/sysctl/kernel.txt | 14 ++++++++++++++
 include/linux/kernel.h          |  1 +
 kernel/printk.c                 |  6 ++++++
 kernel/sysctl.c                 |  9 +++++++++
 security/Kconfig                | 12 ++++++++++++
 security/commoncap.c            |  2 ++
 6 files changed, 44 insertions(+)

diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 3894eaa23486..209e1584c3dc 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -28,6 +28,7 @@ show up in /proc/sys/kernel:
 - core_uses_pid
 - ctrl-alt-del
 - dentry-state
+- dmesg_restrict
 - domainname
 - hostname
 - hotplug
@@ -213,6 +214,19 @@ to decide what to do with it.
 
 ==============================================================
 
+dmesg_restrict:
+
+This toggle indicates whether unprivileged users are prevented from using
+dmesg(8) to view messages from the kernel's log buffer.  When
+dmesg_restrict is set to (0) there are no restrictions.  When
+dmesg_restrict is set set to (1), users must have CAP_SYS_ADMIN to use
+dmesg(8).
+
+The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the default
+value of dmesg_restrict.
+
+==============================================================
+
 domainname & hostname:
 
 These files can be used to set the NIS/YP domainname and the
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index b526947bdf48..fc3da9e4da19 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -293,6 +293,7 @@ extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
 				   unsigned int interval_msec);
 
 extern int printk_delay_msec;
+extern int dmesg_restrict;
 
 /*
  * Print a one-time message (analogous to WARN_ONCE() et al):
diff --git a/kernel/printk.c b/kernel/printk.c
index b2ebaee8c377..38e7d5868d60 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -261,6 +261,12 @@ static inline void boot_delay_msec(void)
 }
 #endif
 
+#ifdef CONFIG_SECURITY_DMESG_RESTRICT
+int dmesg_restrict = 1;
+#else
+int dmesg_restrict;
+#endif
+
 int do_syslog(int type, char __user *buf, int len, bool from_file)
 {
 	unsigned i, j, limit, count;
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index c33a1edb799f..b65bf634035e 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -703,6 +703,15 @@ static struct ctl_table kern_table[] = {
 		.extra2		= &ten_thousand,
 	},
 #endif
+	{
+		.procname	= "dmesg_restrict",
+		.data		= &dmesg_restrict,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &zero,
+		.extra2		= &one,
+	},
 	{
 		.procname	= "ngroups_max",
 		.data		= &ngroups_max,
diff --git a/security/Kconfig b/security/Kconfig
index bd72ae623494..e80da955e687 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -39,6 +39,18 @@ config KEYS_DEBUG_PROC_KEYS
 
 	  If you are unsure as to whether this is required, answer N.
 
+config SECURITY_DMESG_RESTRICT
+	bool "Restrict unprivileged access to the kernel syslog"
+	default n
+	help
+	  This enforces restrictions on unprivileged users reading the kernel
+	  syslog via dmesg(8).
+
+	  If this option is not selected, no restrictions will be enforced
+	  unless the dmesg_restrict sysctl is explicitly set to (1).
+
+	  If you are unsure how to answer this question, answer N.
+
 config SECURITY
 	bool "Enable different security models"
 	depends on SYSFS
diff --git a/security/commoncap.c b/security/commoncap.c
index 5e632b4857e4..04b80f9912bf 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -895,6 +895,8 @@ int cap_syslog(int type, bool from_file)
 {
 	if (type != SYSLOG_ACTION_OPEN && from_file)
 		return 0;
+	if (dmesg_restrict && !capable(CAP_SYS_ADMIN))
+		return -EPERM;
 	if ((type != SYSLOG_ACTION_READ_ALL &&
 	     type != SYSLOG_ACTION_SIZE_BUFFER) && !capable(CAP_SYS_ADMIN))
 		return -EPERM;

From 27d20fddc8af539464fc3ba499d6a830054c3bd6 Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@kernel.dk>
Date: Thu, 11 Nov 2010 14:05:19 -0800
Subject: [PATCH 0526/1066] radix-tree: fix RCU bug

Salman Qazi describes the following radix-tree bug:

In the following case, we get can get a deadlock:

0.  The radix tree contains two items, one has the index 0.
1.  The reader (in this case find_get_pages) takes the rcu_read_lock.
2.  The reader acquires slot(s) for item(s) including the index 0 item.
3.  The non-zero index item is deleted, and as a consequence the other item is
    moved to the root of the tree. The place where it used to be is queued for
    deletion after the readers finish.
3b. The zero item is deleted, removing it from the direct slot, it remains in
    the rcu-delayed indirect node.
4.  The reader looks at the index 0 slot, and finds that the page has 0 ref
    count
5.  The reader looks at it again, hoping that the item will either be freed or
    the ref count will increase. This never happens, as the slot it is looking
    at will never be updated. Also, this slot can never be reclaimed because
    the reader is holding rcu_read_lock and is in an infinite loop.

The fix is to re-use the same "indirect" pointer case that requires a slot
lookup retry into a general "retry the lookup" bit.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Reported-by: Salman Qazi <sqazi@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/radix-tree.h | 39 ++++++++++--------
 lib/radix-tree.c           | 83 ++++++++++++++++++++++++++------------
 mm/filemap.c               | 26 +++++-------
 3 files changed, 91 insertions(+), 57 deletions(-)

diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h
index a39cbed9ee17..ab2baa5c4884 100644
--- a/include/linux/radix-tree.h
+++ b/include/linux/radix-tree.h
@@ -34,19 +34,13 @@
  * needed for RCU lookups (because root->height is unreliable). The only
  * time callers need worry about this is when doing a lookup_slot under
  * RCU.
+ *
+ * Indirect pointer in fact is also used to tag the last pointer of a node
+ * when it is shrunk, before we rcu free the node. See shrink code for
+ * details.
  */
 #define RADIX_TREE_INDIRECT_PTR	1
-#define RADIX_TREE_RETRY ((void *)-1UL)
 
-static inline void *radix_tree_ptr_to_indirect(void *ptr)
-{
-	return (void *)((unsigned long)ptr | RADIX_TREE_INDIRECT_PTR);
-}
-
-static inline void *radix_tree_indirect_to_ptr(void *ptr)
-{
-	return (void *)((unsigned long)ptr & ~RADIX_TREE_INDIRECT_PTR);
-}
 #define radix_tree_indirect_to_ptr(ptr) \
 	radix_tree_indirect_to_ptr((void __force *)(ptr))
 
@@ -140,16 +134,29 @@ do {									\
  *		removed.
  *
  * For use with radix_tree_lookup_slot().  Caller must hold tree at least read
- * locked across slot lookup and dereference.  More likely, will be used with
- * radix_tree_replace_slot(), as well, so caller will hold tree write locked.
+ * locked across slot lookup and dereference. Not required if write lock is
+ * held (ie. items cannot be concurrently inserted).
+ *
+ * radix_tree_deref_retry must be used to confirm validity of the pointer if
+ * only the read lock is held.
  */
 static inline void *radix_tree_deref_slot(void **pslot)
 {
-	void *ret = rcu_dereference(*pslot);
-	if (unlikely(radix_tree_is_indirect_ptr(ret)))
-		ret = RADIX_TREE_RETRY;
-	return ret;
+	return rcu_dereference(*pslot);
 }
+
+/**
+ * radix_tree_deref_retry	- check radix_tree_deref_slot
+ * @arg:	pointer returned by radix_tree_deref_slot
+ * Returns:	0 if retry is not required, otherwise retry is required
+ *
+ * radix_tree_deref_retry must be used with radix_tree_deref_slot.
+ */
+static inline int radix_tree_deref_retry(void *arg)
+{
+	return unlikely((unsigned long)arg & RADIX_TREE_INDIRECT_PTR);
+}
+
 /**
  * radix_tree_replace_slot	- replace item in a slot
  * @pslot:	pointer to slot, returned by radix_tree_lookup_slot
diff --git a/lib/radix-tree.c b/lib/radix-tree.c
index 6f412ab4c24f..5086bb962b4d 100644
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -82,6 +82,16 @@ struct radix_tree_preload {
 };
 static DEFINE_PER_CPU(struct radix_tree_preload, radix_tree_preloads) = { 0, };
 
+static inline void *ptr_to_indirect(void *ptr)
+{
+	return (void *)((unsigned long)ptr | RADIX_TREE_INDIRECT_PTR);
+}
+
+static inline void *indirect_to_ptr(void *ptr)
+{
+	return (void *)((unsigned long)ptr & ~RADIX_TREE_INDIRECT_PTR);
+}
+
 static inline gfp_t root_gfp_mask(struct radix_tree_root *root)
 {
 	return root->gfp_mask & __GFP_BITS_MASK;
@@ -265,7 +275,7 @@ static int radix_tree_extend(struct radix_tree_root *root, unsigned long index)
 			return -ENOMEM;
 
 		/* Increase the height.  */
-		node->slots[0] = radix_tree_indirect_to_ptr(root->rnode);
+		node->slots[0] = indirect_to_ptr(root->rnode);
 
 		/* Propagate the aggregated tag info into the new root */
 		for (tag = 0; tag < RADIX_TREE_MAX_TAGS; tag++) {
@@ -276,7 +286,7 @@ static int radix_tree_extend(struct radix_tree_root *root, unsigned long index)
 		newheight = root->height+1;
 		node->height = newheight;
 		node->count = 1;
-		node = radix_tree_ptr_to_indirect(node);
+		node = ptr_to_indirect(node);
 		rcu_assign_pointer(root->rnode, node);
 		root->height = newheight;
 	} while (height > root->height);
@@ -309,7 +319,7 @@ int radix_tree_insert(struct radix_tree_root *root,
 			return error;
 	}
 
-	slot = radix_tree_indirect_to_ptr(root->rnode);
+	slot = indirect_to_ptr(root->rnode);
 
 	height = root->height;
 	shift = (height-1) * RADIX_TREE_MAP_SHIFT;
@@ -325,8 +335,7 @@ int radix_tree_insert(struct radix_tree_root *root,
 				rcu_assign_pointer(node->slots[offset], slot);
 				node->count++;
 			} else
-				rcu_assign_pointer(root->rnode,
-					radix_tree_ptr_to_indirect(slot));
+				rcu_assign_pointer(root->rnode, ptr_to_indirect(slot));
 		}
 
 		/* Go a level down */
@@ -374,7 +383,7 @@ static void *radix_tree_lookup_element(struct radix_tree_root *root,
 			return NULL;
 		return is_slot ? (void *)&root->rnode : node;
 	}
-	node = radix_tree_indirect_to_ptr(node);
+	node = indirect_to_ptr(node);
 
 	height = node->height;
 	if (index > radix_tree_maxindex(height))
@@ -393,7 +402,7 @@ static void *radix_tree_lookup_element(struct radix_tree_root *root,
 		height--;
 	} while (height > 0);
 
-	return is_slot ? (void *)slot:node;
+	return is_slot ? (void *)slot : indirect_to_ptr(node);
 }
 
 /**
@@ -455,7 +464,7 @@ void *radix_tree_tag_set(struct radix_tree_root *root,
 	height = root->height;
 	BUG_ON(index > radix_tree_maxindex(height));
 
-	slot = radix_tree_indirect_to_ptr(root->rnode);
+	slot = indirect_to_ptr(root->rnode);
 	shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
 
 	while (height > 0) {
@@ -509,7 +518,7 @@ void *radix_tree_tag_clear(struct radix_tree_root *root,
 
 	shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
 	pathp->node = NULL;
-	slot = radix_tree_indirect_to_ptr(root->rnode);
+	slot = indirect_to_ptr(root->rnode);
 
 	while (height > 0) {
 		int offset;
@@ -579,7 +588,7 @@ int radix_tree_tag_get(struct radix_tree_root *root,
 
 	if (!radix_tree_is_indirect_ptr(node))
 		return (index == 0);
-	node = radix_tree_indirect_to_ptr(node);
+	node = indirect_to_ptr(node);
 
 	height = node->height;
 	if (index > radix_tree_maxindex(height))
@@ -666,7 +675,7 @@ unsigned long radix_tree_range_tag_if_tagged(struct radix_tree_root *root,
 	}
 
 	shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
-	slot = radix_tree_indirect_to_ptr(root->rnode);
+	slot = indirect_to_ptr(root->rnode);
 
 	/*
 	 * we fill the path from (root->height - 2) to 0, leaving the index at
@@ -897,7 +906,7 @@ radix_tree_gang_lookup(struct radix_tree_root *root, void **results,
 		results[0] = node;
 		return 1;
 	}
-	node = radix_tree_indirect_to_ptr(node);
+	node = indirect_to_ptr(node);
 
 	max_index = radix_tree_maxindex(node->height);
 
@@ -916,7 +925,8 @@ radix_tree_gang_lookup(struct radix_tree_root *root, void **results,
 			slot = *(((void ***)results)[ret + i]);
 			if (!slot)
 				continue;
-			results[ret + nr_found] = rcu_dereference_raw(slot);
+			results[ret + nr_found] =
+				indirect_to_ptr(rcu_dereference_raw(slot));
 			nr_found++;
 		}
 		ret += nr_found;
@@ -965,7 +975,7 @@ radix_tree_gang_lookup_slot(struct radix_tree_root *root, void ***results,
 		results[0] = (void **)&root->rnode;
 		return 1;
 	}
-	node = radix_tree_indirect_to_ptr(node);
+	node = indirect_to_ptr(node);
 
 	max_index = radix_tree_maxindex(node->height);
 
@@ -1090,7 +1100,7 @@ radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results,
 		results[0] = node;
 		return 1;
 	}
-	node = radix_tree_indirect_to_ptr(node);
+	node = indirect_to_ptr(node);
 
 	max_index = radix_tree_maxindex(node->height);
 
@@ -1109,7 +1119,8 @@ radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results,
 			slot = *(((void ***)results)[ret + i]);
 			if (!slot)
 				continue;
-			results[ret + nr_found] = rcu_dereference_raw(slot);
+			results[ret + nr_found] =
+				indirect_to_ptr(rcu_dereference_raw(slot));
 			nr_found++;
 		}
 		ret += nr_found;
@@ -1159,7 +1170,7 @@ radix_tree_gang_lookup_tag_slot(struct radix_tree_root *root, void ***results,
 		results[0] = (void **)&root->rnode;
 		return 1;
 	}
-	node = radix_tree_indirect_to_ptr(node);
+	node = indirect_to_ptr(node);
 
 	max_index = radix_tree_maxindex(node->height);
 
@@ -1195,7 +1206,7 @@ static inline void radix_tree_shrink(struct radix_tree_root *root)
 		void *newptr;
 
 		BUG_ON(!radix_tree_is_indirect_ptr(to_free));
-		to_free = radix_tree_indirect_to_ptr(to_free);
+		to_free = indirect_to_ptr(to_free);
 
 		/*
 		 * The candidate node has more than one child, or its child
@@ -1208,16 +1219,39 @@ static inline void radix_tree_shrink(struct radix_tree_root *root)
 
 		/*
 		 * We don't need rcu_assign_pointer(), since we are simply
-		 * moving the node from one part of the tree to another. If
-		 * it was safe to dereference the old pointer to it
+		 * moving the node from one part of the tree to another: if it
+		 * was safe to dereference the old pointer to it
 		 * (to_free->slots[0]), it will be safe to dereference the new
-		 * one (root->rnode).
+		 * one (root->rnode) as far as dependent read barriers go.
 		 */
 		newptr = to_free->slots[0];
 		if (root->height > 1)
-			newptr = radix_tree_ptr_to_indirect(newptr);
+			newptr = ptr_to_indirect(newptr);
 		root->rnode = newptr;
 		root->height--;
+
+		/*
+		 * We have a dilemma here. The node's slot[0] must not be
+		 * NULLed in case there are concurrent lookups expecting to
+		 * find the item. However if this was a bottom-level node,
+		 * then it may be subject to the slot pointer being visible
+		 * to callers dereferencing it. If item corresponding to
+		 * slot[0] is subsequently deleted, these callers would expect
+		 * their slot to become empty sooner or later.
+		 *
+		 * For example, lockless pagecache will look up a slot, deref
+		 * the page pointer, and if the page is 0 refcount it means it
+		 * was concurrently deleted from pagecache so try the deref
+		 * again. Fortunately there is already a requirement for logic
+		 * to retry the entire slot lookup -- the indirect pointer
+		 * problem (replacing direct root node with an indirect pointer
+		 * also results in a stale slot). So tag the slot as indirect
+		 * to force callers to retry.
+		 */
+		if (root->height == 0)
+			*((unsigned long *)&to_free->slots[0]) |=
+						RADIX_TREE_INDIRECT_PTR;
+
 		radix_tree_node_free(to_free);
 	}
 }
@@ -1254,7 +1288,7 @@ void *radix_tree_delete(struct radix_tree_root *root, unsigned long index)
 		root->rnode = NULL;
 		goto out;
 	}
-	slot = radix_tree_indirect_to_ptr(slot);
+	slot = indirect_to_ptr(slot);
 
 	shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
 	pathp->node = NULL;
@@ -1296,8 +1330,7 @@ void *radix_tree_delete(struct radix_tree_root *root, unsigned long index)
 			radix_tree_node_free(to_free);
 
 		if (pathp->node->count) {
-			if (pathp->node ==
-					radix_tree_indirect_to_ptr(root->rnode))
+			if (pathp->node == indirect_to_ptr(root->rnode))
 				radix_tree_shrink(root);
 			goto out;
 		}
diff --git a/mm/filemap.c b/mm/filemap.c
index 4ee2e998e937..ea89840fc65f 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -644,7 +644,9 @@ repeat:
 	pagep = radix_tree_lookup_slot(&mapping->page_tree, offset);
 	if (pagep) {
 		page = radix_tree_deref_slot(pagep);
-		if (unlikely(!page || page == RADIX_TREE_RETRY))
+		if (unlikely(!page))
+			goto out;
+		if (radix_tree_deref_retry(page))
 			goto repeat;
 
 		if (!page_cache_get_speculative(page))
@@ -660,6 +662,7 @@ repeat:
 			goto repeat;
 		}
 	}
+out:
 	rcu_read_unlock();
 
 	return page;
@@ -777,12 +780,11 @@ repeat:
 		page = radix_tree_deref_slot((void **)pages[i]);
 		if (unlikely(!page))
 			continue;
-		/*
-		 * this can only trigger if nr_found == 1, making livelock
-		 * a non issue.
-		 */
-		if (unlikely(page == RADIX_TREE_RETRY))
+		if (radix_tree_deref_retry(page)) {
+			if (ret)
+				start = pages[ret-1]->index;
 			goto restart;
+		}
 
 		if (!page_cache_get_speculative(page))
 			goto repeat;
@@ -830,11 +832,7 @@ repeat:
 		page = radix_tree_deref_slot((void **)pages[i]);
 		if (unlikely(!page))
 			continue;
-		/*
-		 * this can only trigger if nr_found == 1, making livelock
-		 * a non issue.
-		 */
-		if (unlikely(page == RADIX_TREE_RETRY))
+		if (radix_tree_deref_retry(page))
 			goto restart;
 
 		if (page->mapping == NULL || page->index != index)
@@ -887,11 +885,7 @@ repeat:
 		page = radix_tree_deref_slot((void **)pages[i]);
 		if (unlikely(!page))
 			continue;
-		/*
-		 * this can only trigger if nr_found == 1, making livelock
-		 * a non issue.
-		 */
-		if (unlikely(page == RADIX_TREE_RETRY))
+		if (radix_tree_deref_retry(page))
 			goto restart;
 
 		if (!page_cache_get_speculative(page))

From 52ca0e84b05595cf74f1ff772b3f9807256b1b27 Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Thu, 11 Nov 2010 14:05:20 -0800
Subject: [PATCH 0527/1066] hugetlbfs: lessen the impact of a deprecation
 warning

WARN_ONCE is a bit strong for a deprecation warning, given that it spews a
huge backtrace.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/hugetlbfs/inode.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index d6cfac1f0a40..a5fe68189eed 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -932,8 +932,7 @@ struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag,
 	if (creat_flags == HUGETLB_SHMFS_INODE && !can_do_hugetlb_shm()) {
 		*user = current_user();
 		if (user_shm_lock(size, *user)) {
-			WARN_ONCE(1,
-			  "Using mlock ulimits for SHM_HUGETLB deprecated\n");
+			printk_once(KERN_WARNING "Using mlock ulimits for SHM_HUGETLB is deprecated\n");
 		} else {
 			*user = NULL;
 			return ERR_PTR(-EPERM);

From 5ada28bf76752e33dce3d807bf0dfbe6d1b943ad Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 11 Nov 2010 14:05:21 -0800
Subject: [PATCH 0528/1066] led-class: always implement blinking

Currently, blinking LEDs can be awkward because it is not guaranteed that
all LEDs implement blinking.  The trigger that wants it to blink then
needs to implement its own timer solution.

Rather than require that, add led_blink_set() API that triggers can use.
This function will attempt to use hw blinking, but if that fails
implements a timer for it.  To stop blinking again, brightness_set() also
needs to be wrapped into API that will stop the software blink.

As a result of this, the timer trigger becomes a very trivial one, and
hopefully we can finally see triggers using blinking as well because it's
always easy to use.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/leds-class.txt        |  19 +++--
 drivers/leds/Kconfig                |   2 +-
 drivers/leds/led-class.c            | 105 ++++++++++++++++++++++-
 drivers/leds/led-triggers.c         |   2 +-
 drivers/leds/ledtrig-timer.c        | 124 +++-------------------------
 drivers/net/wireless/rt2x00/Kconfig |   3 -
 include/linux/leds.h                |  47 ++++++++++-
 7 files changed, 170 insertions(+), 132 deletions(-)

diff --git a/Documentation/leds-class.txt b/Documentation/leds-class.txt
index 8fd5ca2ae32d..58b266bd1846 100644
--- a/Documentation/leds-class.txt
+++ b/Documentation/leds-class.txt
@@ -60,15 +60,18 @@ Hardware accelerated blink of LEDs
 
 Some LEDs can be programmed to blink without any CPU interaction. To
 support this feature, a LED driver can optionally implement the
-blink_set() function (see <linux/leds.h>). If implemented, triggers can
-attempt to use it before falling back to software timers. The blink_set()
-function should return 0 if the blink setting is supported, or -EINVAL
-otherwise, which means that LED blinking will be handled by software.
+blink_set() function (see <linux/leds.h>). To set an LED to blinking,
+however, it is better to use use the API function led_blink_set(),
+as it will check and implement software fallback if necessary.
 
-The blink_set() function should choose a user friendly blinking
-value if it is called with *delay_on==0 && *delay_off==0 parameters. In
-this case the driver should give back the chosen value through delay_on
-and delay_off parameters to the leds subsystem.
+To turn off blinking again, use the API function led_brightness_set()
+as that will not just set the LED brightness but also stop any software
+timers that may have been required for blinking.
+
+The blink_set() function should choose a user friendly blinking value
+if it is called with *delay_on==0 && *delay_off==0 parameters. In this
+case the driver should give back the chosen value through delay_on and
+delay_off parameters to the leds subsystem.
 
 Setting the brightness to zero with brightness_set() callback function
 should completely turn off the LED and cancel the previously programmed
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index cc2a88d5192f..56b4b7a5ff31 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -10,7 +10,7 @@ menuconfig NEW_LEDS
 if NEW_LEDS
 
 config LEDS_CLASS
-	tristate "LED Class Support"
+	bool "LED Class Support"
 	help
 	  This option enables the led sysfs class in /sys/class/leds.  You'll
 	  need this to do anything useful with LEDs.  If unsure, say N.
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 260660076507..211e21f34bd5 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -81,6 +81,79 @@ static struct device_attribute led_class_attrs[] = {
 	__ATTR_NULL,
 };
 
+static void led_timer_function(unsigned long data)
+{
+	struct led_classdev *led_cdev = (void *)data;
+	unsigned long brightness;
+	unsigned long delay;
+
+	if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) {
+		led_set_brightness(led_cdev, LED_OFF);
+		return;
+	}
+
+	brightness = led_get_brightness(led_cdev);
+	if (!brightness) {
+		/* Time to switch the LED on. */
+		brightness = led_cdev->blink_brightness;
+		delay = led_cdev->blink_delay_on;
+	} else {
+		/* Store the current brightness value to be able
+		 * to restore it when the delay_off period is over.
+		 */
+		led_cdev->blink_brightness = brightness;
+		brightness = LED_OFF;
+		delay = led_cdev->blink_delay_off;
+	}
+
+	led_set_brightness(led_cdev, brightness);
+
+	mod_timer(&led_cdev->blink_timer, jiffies + msecs_to_jiffies(delay));
+}
+
+static void led_stop_software_blink(struct led_classdev *led_cdev)
+{
+	/* deactivate previous settings */
+	del_timer_sync(&led_cdev->blink_timer);
+	led_cdev->blink_delay_on = 0;
+	led_cdev->blink_delay_off = 0;
+}
+
+static void led_set_software_blink(struct led_classdev *led_cdev,
+				   unsigned long delay_on,
+				   unsigned long delay_off)
+{
+	int current_brightness;
+
+	current_brightness = led_get_brightness(led_cdev);
+	if (current_brightness)
+		led_cdev->blink_brightness = current_brightness;
+	if (!led_cdev->blink_brightness)
+		led_cdev->blink_brightness = led_cdev->max_brightness;
+
+	if (delay_on == led_cdev->blink_delay_on &&
+	    delay_off == led_cdev->blink_delay_off)
+		return;
+
+	led_stop_software_blink(led_cdev);
+
+	led_cdev->blink_delay_on = delay_on;
+	led_cdev->blink_delay_off = delay_off;
+
+	/* never on - don't blink */
+	if (!delay_on)
+		return;
+
+	/* never off - just set to brightness */
+	if (!delay_off) {
+		led_set_brightness(led_cdev, led_cdev->blink_brightness);
+		return;
+	}
+
+	mod_timer(&led_cdev->blink_timer, jiffies + 1);
+}
+
+
 /**
  * led_classdev_suspend - suspend an led_classdev.
  * @led_cdev: the led_classdev to suspend.
@@ -148,6 +221,10 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
 
 	led_update_brightness(led_cdev);
 
+	init_timer(&led_cdev->blink_timer);
+	led_cdev->blink_timer.function = led_timer_function;
+	led_cdev->blink_timer.data = (unsigned long)led_cdev;
+
 #ifdef CONFIG_LEDS_TRIGGERS
 	led_trigger_set_default(led_cdev);
 #endif
@@ -157,7 +234,6 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
 
 	return 0;
 }
-
 EXPORT_SYMBOL_GPL(led_classdev_register);
 
 /**
@@ -175,6 +251,9 @@ void led_classdev_unregister(struct led_classdev *led_cdev)
 	up_write(&led_cdev->trigger_lock);
 #endif
 
+	/* Stop blinking */
+	led_brightness_set(led_cdev, LED_OFF);
+
 	device_unregister(led_cdev->dev);
 
 	down_write(&leds_list_lock);
@@ -183,6 +262,30 @@ void led_classdev_unregister(struct led_classdev *led_cdev)
 }
 EXPORT_SYMBOL_GPL(led_classdev_unregister);
 
+void led_blink_set(struct led_classdev *led_cdev,
+		   unsigned long *delay_on,
+		   unsigned long *delay_off)
+{
+	if (led_cdev->blink_set &&
+	    led_cdev->blink_set(led_cdev, delay_on, delay_off))
+		return;
+
+	/* blink with 1 Hz as default if nothing specified */
+	if (!*delay_on && !*delay_off)
+		*delay_on = *delay_off = 500;
+
+	led_set_software_blink(led_cdev, *delay_on, *delay_off);
+}
+EXPORT_SYMBOL(led_blink_set);
+
+void led_brightness_set(struct led_classdev *led_cdev,
+			enum led_brightness brightness)
+{
+	led_stop_software_blink(led_cdev);
+	led_cdev->brightness_set(led_cdev, brightness);
+}
+EXPORT_SYMBOL(led_brightness_set);
+
 static int __init leds_init(void)
 {
 	leds_class = class_create(THIS_MODULE, "leds");
diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index f1c00db88b5e..c41eb6180c9c 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -113,7 +113,7 @@ void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trigger)
 		if (led_cdev->trigger->deactivate)
 			led_cdev->trigger->deactivate(led_cdev);
 		led_cdev->trigger = NULL;
-		led_set_brightness(led_cdev, LED_OFF);
+		led_brightness_set(led_cdev, LED_OFF);
 	}
 	if (trigger) {
 		write_lock_irqsave(&trigger->leddev_list_lock, flags);
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c
index 82b77bd482ff..b09bcbeade9c 100644
--- a/drivers/leds/ledtrig-timer.c
+++ b/drivers/leds/ledtrig-timer.c
@@ -12,73 +12,25 @@
  */
 
 #include <linux/module.h>
-#include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
 #include <linux/device.h>
-#include <linux/sysdev.h>
-#include <linux/timer.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
-#include <linux/slab.h>
 #include "leds.h"
 
-struct timer_trig_data {
-	int brightness_on;		/* LED brightness during "on" period.
-					 * (LED_OFF < brightness_on <= LED_FULL)
-					 */
-	unsigned long delay_on;		/* milliseconds on */
-	unsigned long delay_off;	/* milliseconds off */
-	struct timer_list timer;
-};
-
-static void led_timer_function(unsigned long data)
-{
-	struct led_classdev *led_cdev = (struct led_classdev *) data;
-	struct timer_trig_data *timer_data = led_cdev->trigger_data;
-	unsigned long brightness;
-	unsigned long delay;
-
-	if (!timer_data->delay_on || !timer_data->delay_off) {
-		led_set_brightness(led_cdev, LED_OFF);
-		return;
-	}
-
-	brightness = led_get_brightness(led_cdev);
-	if (!brightness) {
-		/* Time to switch the LED on. */
-		brightness = timer_data->brightness_on;
-		delay = timer_data->delay_on;
-	} else {
-		/* Store the current brightness value to be able
-		 * to restore it when the delay_off period is over.
-		 */
-		timer_data->brightness_on = brightness;
-		brightness = LED_OFF;
-		delay = timer_data->delay_off;
-	}
-
-	led_set_brightness(led_cdev, brightness);
-
-	mod_timer(&timer_data->timer, jiffies + msecs_to_jiffies(delay));
-}
-
 static ssize_t led_delay_on_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-	struct timer_trig_data *timer_data = led_cdev->trigger_data;
 
-	return sprintf(buf, "%lu\n", timer_data->delay_on);
+	return sprintf(buf, "%lu\n", led_cdev->blink_delay_on);
 }
 
 static ssize_t led_delay_on_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t size)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-	struct timer_trig_data *timer_data = led_cdev->trigger_data;
 	int ret = -EINVAL;
 	char *after;
 	unsigned long state = simple_strtoul(buf, &after, 10);
@@ -88,21 +40,7 @@ static ssize_t led_delay_on_store(struct device *dev,
 		count++;
 
 	if (count == size) {
-		if (timer_data->delay_on != state) {
-			/* the new value differs from the previous */
-			timer_data->delay_on = state;
-
-			/* deactivate previous settings */
-			del_timer_sync(&timer_data->timer);
-
-			/* try to activate hardware acceleration, if any */
-			if (!led_cdev->blink_set ||
-			    led_cdev->blink_set(led_cdev,
-			      &timer_data->delay_on, &timer_data->delay_off)) {
-				/* no hardware acceleration, blink via timer */
-				mod_timer(&timer_data->timer, jiffies + 1);
-			}
-		}
+		led_blink_set(led_cdev, &state, &led_cdev->blink_delay_off);
 		ret = count;
 	}
 
@@ -113,16 +51,14 @@ static ssize_t led_delay_off_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-	struct timer_trig_data *timer_data = led_cdev->trigger_data;
 
-	return sprintf(buf, "%lu\n", timer_data->delay_off);
+	return sprintf(buf, "%lu\n", led_cdev->blink_delay_off);
 }
 
 static ssize_t led_delay_off_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t size)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-	struct timer_trig_data *timer_data = led_cdev->trigger_data;
 	int ret = -EINVAL;
 	char *after;
 	unsigned long state = simple_strtoul(buf, &after, 10);
@@ -132,21 +68,7 @@ static ssize_t led_delay_off_store(struct device *dev,
 		count++;
 
 	if (count == size) {
-		if (timer_data->delay_off != state) {
-			/* the new value differs from the previous */
-			timer_data->delay_off = state;
-
-			/* deactivate previous settings */
-			del_timer_sync(&timer_data->timer);
-
-			/* try to activate hardware acceleration, if any */
-			if (!led_cdev->blink_set ||
-			    led_cdev->blink_set(led_cdev,
-			      &timer_data->delay_on, &timer_data->delay_off)) {
-				/* no hardware acceleration, blink via timer */
-				mod_timer(&timer_data->timer, jiffies + 1);
-			}
-		}
+		led_blink_set(led_cdev, &led_cdev->blink_delay_on, &state);
 		ret = count;
 	}
 
@@ -158,60 +80,34 @@ static DEVICE_ATTR(delay_off, 0644, led_delay_off_show, led_delay_off_store);
 
 static void timer_trig_activate(struct led_classdev *led_cdev)
 {
-	struct timer_trig_data *timer_data;
 	int rc;
 
-	timer_data = kzalloc(sizeof(struct timer_trig_data), GFP_KERNEL);
-	if (!timer_data)
-		return;
-
-	timer_data->brightness_on = led_get_brightness(led_cdev);
-	if (timer_data->brightness_on == LED_OFF)
-		timer_data->brightness_on = led_cdev->max_brightness;
-	led_cdev->trigger_data = timer_data;
-
-	init_timer(&timer_data->timer);
-	timer_data->timer.function = led_timer_function;
-	timer_data->timer.data = (unsigned long) led_cdev;
+	led_cdev->trigger_data = NULL;
 
 	rc = device_create_file(led_cdev->dev, &dev_attr_delay_on);
 	if (rc)
-		goto err_out;
+		return;
 	rc = device_create_file(led_cdev->dev, &dev_attr_delay_off);
 	if (rc)
 		goto err_out_delayon;
 
-	/* If there is hardware support for blinking, start one
-	 * user friendly blink rate chosen by the driver.
-	 */
-	if (led_cdev->blink_set)
-		led_cdev->blink_set(led_cdev,
-			&timer_data->delay_on, &timer_data->delay_off);
+	led_cdev->trigger_data = (void *)1;
 
 	return;
 
 err_out_delayon:
 	device_remove_file(led_cdev->dev, &dev_attr_delay_on);
-err_out:
-	led_cdev->trigger_data = NULL;
-	kfree(timer_data);
 }
 
 static void timer_trig_deactivate(struct led_classdev *led_cdev)
 {
-	struct timer_trig_data *timer_data = led_cdev->trigger_data;
-	unsigned long on = 0, off = 0;
-
-	if (timer_data) {
+	if (led_cdev->trigger_data) {
 		device_remove_file(led_cdev->dev, &dev_attr_delay_on);
 		device_remove_file(led_cdev->dev, &dev_attr_delay_off);
-		del_timer_sync(&timer_data->timer);
-		kfree(timer_data);
 	}
 
-	/* If there is hardware support for blinking, stop it */
-	if (led_cdev->blink_set)
-		led_cdev->blink_set(led_cdev, &on, &off);
+	/* Stop blinking */
+	led_brightness_set(led_cdev, LED_OFF);
 }
 
 static struct led_trigger timer_led_trigger = {
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index eea1ef2f502b..4396d4b9bfb9 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -221,9 +221,6 @@ config RT2X00_LIB_LEDS
 	boolean
 	default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
 
-comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00"
-	depends on RT2X00_LIB=y && LEDS_CLASS=m
-
 config RT2X00_LIB_DEBUGFS
 	bool "Ralink debugfs support"
 	depends on RT2X00_LIB && MAC80211_DEBUGFS
diff --git a/include/linux/leds.h b/include/linux/leds.h
index ba6986a11663..0f19df9e37b0 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/rwsem.h>
+#include <linux/timer.h>
 
 struct device;
 /*
@@ -45,10 +46,14 @@ struct led_classdev {
 	/* Get LED brightness level */
 	enum led_brightness (*brightness_get)(struct led_classdev *led_cdev);
 
-	/* Activate hardware accelerated blink, delays are in
-	 * miliseconds and if none is provided then a sensible default
-	 * should be chosen. The call can adjust the timings if it can't
-	 * match the values specified exactly. */
+	/*
+	 * Activate hardware accelerated blink, delays are in milliseconds
+	 * and if both are zero then a sensible default should be chosen.
+	 * The call should adjust the timings in that case and if it can't
+	 * match the values specified exactly.
+	 * Deactivate blinking again when the brightness is set to a fixed
+	 * value via the brightness_set() callback.
+	 */
 	int		(*blink_set)(struct led_classdev *led_cdev,
 				     unsigned long *delay_on,
 				     unsigned long *delay_off);
@@ -57,6 +62,10 @@ struct led_classdev {
 	struct list_head	 node;			/* LED Device list */
 	const char		*default_trigger;	/* Trigger to use */
 
+	unsigned long		 blink_delay_on, blink_delay_off;
+	struct timer_list	 blink_timer;
+	int			 blink_brightness;
+
 #ifdef CONFIG_LEDS_TRIGGERS
 	/* Protects the trigger data below */
 	struct rw_semaphore	 trigger_lock;
@@ -73,6 +82,36 @@ extern void led_classdev_unregister(struct led_classdev *led_cdev);
 extern void led_classdev_suspend(struct led_classdev *led_cdev);
 extern void led_classdev_resume(struct led_classdev *led_cdev);
 
+/**
+ * led_blink_set - set blinking with software fallback
+ * @led_cdev: the LED to start blinking
+ * @delay_on: the time it should be on (in ms)
+ * @delay_off: the time it should ble off (in ms)
+ *
+ * This function makes the LED blink, attempting to use the
+ * hardware acceleration if possible, but falling back to
+ * software blinking if there is no hardware blinking or if
+ * the LED refuses the passed values.
+ *
+ * Note that if software blinking is active, simply calling
+ * led_cdev->brightness_set() will not stop the blinking,
+ * use led_classdev_brightness_set() instead.
+ */
+extern void led_blink_set(struct led_classdev *led_cdev,
+			  unsigned long *delay_on,
+			  unsigned long *delay_off);
+/**
+ * led_brightness_set - set LED brightness
+ * @led_cdev: the LED to set
+ * @brightness: the brightness to set it to
+ *
+ * Set an LED's brightness, and, if necessary, cancel the
+ * software blink timer that implements blinking when the
+ * hardware doesn't.
+ */
+extern void led_brightness_set(struct led_classdev *led_cdev,
+			       enum led_brightness brightness);
+
 /*
  * LED Triggers
  */

From 500fe141367e5291257e809c12f95ea54181e96d Mon Sep 17 00:00:00 2001
From: Samu Onkalo <samu.p.onkalo@nokia.com>
Date: Thu, 11 Nov 2010 14:05:22 -0800
Subject: [PATCH 0529/1066] leds: driver for National Semiconductor LP5521 chip

This patchset provides support for LP5521 and LP5523 LED driver chips from
National Semicondutor.  Both drivers supports programmable engines and
naturally LED class features.

Documentation is provided as a part of the patchset.  I created "leds"
subdirectory under Documentation.  Perhaps the rest of the leds*
documentation should be moved there.

Datasheets are freely available at National Semiconductor www pages.

This patch:

LP5521 chip is three channel led driver with programmable engines.  Driver
provides support for that chip for direct access via led class or via
programmable engines.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/leds/leds-lp5521.c  | 821 ++++++++++++++++++++++++++++++++++++
 include/linux/leds-lp5521.h |  47 +++
 2 files changed, 868 insertions(+)
 create mode 100644 drivers/leds/leds-lp5521.c
 create mode 100644 include/linux/leds-lp5521.h

diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
new file mode 100644
index 000000000000..3782f31f06d2
--- /dev/null
+++ b/drivers/leds/leds-lp5521.c
@@ -0,0 +1,821 @@
+/*
+ * LP5521 LED chip driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/leds.h>
+#include <linux/leds-lp5521.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#define LP5521_PROGRAM_LENGTH		32	/* in bytes */
+
+#define LP5521_MAX_LEDS			3	/* Maximum number of LEDs */
+#define LP5521_MAX_ENGINES		3	/* Maximum number of engines */
+
+#define LP5521_ENG_MASK_BASE		0x30	/* 00110000 */
+#define LP5521_ENG_STATUS_MASK		0x07	/* 00000111 */
+
+#define LP5521_CMD_LOAD			0x15	/* 00010101 */
+#define LP5521_CMD_RUN			0x2a	/* 00101010 */
+#define LP5521_CMD_DIRECT		0x3f	/* 00111111 */
+#define LP5521_CMD_DISABLED		0x00	/* 00000000 */
+
+/* Registers */
+#define LP5521_REG_ENABLE		0x00
+#define LP5521_REG_OP_MODE		0x01
+#define LP5521_REG_R_PWM		0x02
+#define LP5521_REG_G_PWM		0x03
+#define LP5521_REG_B_PWM		0x04
+#define LP5521_REG_R_CURRENT		0x05
+#define LP5521_REG_G_CURRENT		0x06
+#define LP5521_REG_B_CURRENT		0x07
+#define LP5521_REG_CONFIG		0x08
+#define LP5521_REG_R_CHANNEL_PC		0x09
+#define LP5521_REG_G_CHANNEL_PC		0x0A
+#define LP5521_REG_B_CHANNEL_PC		0x0B
+#define LP5521_REG_STATUS		0x0C
+#define LP5521_REG_RESET		0x0D
+#define LP5521_REG_GPO			0x0E
+#define LP5521_REG_R_PROG_MEM		0x10
+#define LP5521_REG_G_PROG_MEM		0x30
+#define LP5521_REG_B_PROG_MEM		0x50
+
+#define LP5521_PROG_MEM_BASE		LP5521_REG_R_PROG_MEM
+#define LP5521_PROG_MEM_SIZE		0x20
+
+/* Base register to set LED current */
+#define LP5521_REG_LED_CURRENT_BASE	LP5521_REG_R_CURRENT
+
+/* Base register to set the brightness */
+#define LP5521_REG_LED_PWM_BASE		LP5521_REG_R_PWM
+
+/* Bits in ENABLE register */
+#define LP5521_MASTER_ENABLE		0x40	/* Chip master enable */
+#define LP5521_LOGARITHMIC_PWM		0x80	/* Logarithmic PWM adjustment */
+#define LP5521_EXEC_RUN			0x2A
+
+/* Bits in CONFIG register */
+#define LP5521_PWM_HF			0x40	/* PWM: 0 = 256Hz, 1 = 558Hz */
+#define LP5521_PWRSAVE_EN		0x20	/* 1 = Power save mode */
+#define LP5521_CP_MODE_OFF		0	/* Charge pump (CP) off */
+#define LP5521_CP_MODE_BYPASS		8	/* CP forced to bypass mode */
+#define LP5521_CP_MODE_1X5		0x10	/* CP forced to 1.5x mode */
+#define LP5521_CP_MODE_AUTO		0x18	/* Automatic mode selection */
+#define LP5521_R_TO_BATT		4	/* R out: 0 = CP, 1 = Vbat */
+#define LP5521_CLK_SRC_EXT		0	/* Ext-clk source (CLK_32K) */
+#define LP5521_CLK_INT			1	/* Internal clock */
+#define LP5521_CLK_AUTO			2	/* Automatic clock selection */
+
+/* Status */
+#define LP5521_EXT_CLK_USED		0x08
+
+struct lp5521_engine {
+	const struct attribute_group *attributes;
+	int		id;
+	u8		mode;
+	u8		prog_page;
+	u8		engine_mask;
+};
+
+struct lp5521_led {
+	int			id;
+	u8			chan_nr;
+	u8			led_current;
+	u8			max_current;
+	struct led_classdev	cdev;
+	struct work_struct	brightness_work;
+	u8			brightness;
+};
+
+struct lp5521_chip {
+	struct lp5521_platform_data *pdata;
+	struct mutex		lock; /* Serialize control */
+	struct i2c_client	*client;
+	struct lp5521_engine	engines[LP5521_MAX_ENGINES];
+	struct lp5521_led	leds[LP5521_MAX_LEDS];
+	u8			num_channels;
+	u8			num_leds;
+};
+
+#define cdev_to_led(c)		container_of(c, struct lp5521_led, cdev)
+#define engine_to_lp5521(eng)	container_of((eng), struct lp5521_chip, \
+						engines[(eng)->id - 1])
+#define led_to_lp5521(led)	container_of((led), struct lp5521_chip, \
+						leds[(led)->id])
+
+static void lp5521_led_brightness_work(struct work_struct *work);
+
+static inline int lp5521_write(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf)
+{
+	s32 ret;
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+	if (ret < 0)
+		return -EIO;
+
+	*buf = ret;
+	return 0;
+}
+
+static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode)
+{
+	struct lp5521_chip *chip = engine_to_lp5521(engine);
+	struct i2c_client *client = chip->client;
+	int ret;
+	u8 engine_state;
+
+	/* Only transition between RUN and DIRECT mode are handled here */
+	if (mode == LP5521_CMD_LOAD)
+		return 0;
+
+	if (mode == LP5521_CMD_DISABLED)
+		mode = LP5521_CMD_DIRECT;
+
+	ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state);
+
+	/* set mode only for this engine */
+	engine_state &= ~(engine->engine_mask);
+	mode &= engine->engine_mask;
+	engine_state |= mode;
+	ret |= lp5521_write(client, LP5521_REG_OP_MODE, engine_state);
+
+	return ret;
+}
+
+static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern)
+{
+	struct lp5521_chip *chip = engine_to_lp5521(eng);
+	struct i2c_client *client = chip->client;
+	int ret;
+	int addr;
+	u8 mode;
+
+	/* move current engine to direct mode and remember the state */
+	ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT);
+	usleep_range(1000, 10000);
+	ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode);
+
+	/* For loading, all the engines to load mode */
+	lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
+	usleep_range(1000, 10000);
+	lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD);
+	usleep_range(1000, 10000);
+
+	addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE;
+	i2c_smbus_write_i2c_block_data(client,
+				addr,
+				LP5521_PROG_MEM_SIZE,
+				pattern);
+
+	ret |= lp5521_write(client, LP5521_REG_OP_MODE, mode);
+	return ret;
+}
+
+static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr)
+{
+	return lp5521_write(chip->client,
+		    LP5521_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr,
+		    curr);
+}
+
+static void lp5521_init_engine(struct lp5521_chip *chip,
+			const struct attribute_group *attr_group)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
+		chip->engines[i].id = i + 1;
+		chip->engines[i].engine_mask = LP5521_ENG_MASK_BASE >> (i * 2);
+		chip->engines[i].prog_page = i;
+		chip->engines[i].attributes = &attr_group[i];
+	}
+}
+
+static int lp5521_configure(struct i2c_client *client,
+			const struct attribute_group *attr_group)
+{
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	int ret;
+
+	lp5521_init_engine(chip, attr_group);
+
+	lp5521_write(client, LP5521_REG_RESET, 0xff);
+
+	usleep_range(10000, 20000);
+
+	/* Set all PWMs to direct control mode */
+	ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F);
+
+	/* Enable auto-powersave, set charge pump to auto, red to battery */
+	ret |= lp5521_write(client, LP5521_REG_CONFIG,
+		LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT);
+
+	/* Initialize all channels PWM to zero -> leds off */
+	ret |= lp5521_write(client, LP5521_REG_R_PWM, 0);
+	ret |= lp5521_write(client, LP5521_REG_G_PWM, 0);
+	ret |= lp5521_write(client, LP5521_REG_B_PWM, 0);
+
+	/* Set engines are set to run state when OP_MODE enables engines */
+	ret |= lp5521_write(client, LP5521_REG_ENABLE,
+			LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM |
+			LP5521_EXEC_RUN);
+	/* enable takes 500us */
+	usleep_range(500, 20000);
+
+	return ret;
+}
+
+static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf)
+{
+	int ret;
+	u8 status;
+
+	ret = lp5521_read(chip->client, LP5521_REG_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	/* Check that ext clock is really in use if requested */
+	if (chip->pdata && chip->pdata->clock_mode == LP5521_CLOCK_EXT)
+		if  ((status & LP5521_EXT_CLK_USED) == 0)
+			return -EIO;
+	return 0;
+}
+
+static void lp5521_set_brightness(struct led_classdev *cdev,
+			     enum led_brightness brightness)
+{
+	struct lp5521_led *led = cdev_to_led(cdev);
+	led->brightness = (u8)brightness;
+	schedule_work(&led->brightness_work);
+}
+
+static void lp5521_led_brightness_work(struct work_struct *work)
+{
+	struct lp5521_led *led = container_of(work,
+					      struct lp5521_led,
+					      brightness_work);
+	struct lp5521_chip *chip = led_to_lp5521(led);
+	struct i2c_client *client = chip->client;
+
+	mutex_lock(&chip->lock);
+	lp5521_write(client, LP5521_REG_LED_PWM_BASE + led->chan_nr,
+		led->brightness);
+	mutex_unlock(&chip->lock);
+}
+
+/* Detect the chip by setting its ENABLE register and reading it back. */
+static int lp5521_detect(struct i2c_client *client)
+{
+	int ret;
+	u8 buf;
+
+	ret = lp5521_write(client, LP5521_REG_ENABLE,
+			LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM);
+	if (ret)
+		return ret;
+	usleep_range(1000, 10000);
+	ret = lp5521_read(client, LP5521_REG_ENABLE, &buf);
+	if (ret)
+		return ret;
+	if (buf != (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM))
+		return -ENODEV;
+
+	return 0;
+}
+
+/* Set engine mode and create appropriate sysfs attributes, if required. */
+static int lp5521_set_mode(struct lp5521_engine *engine, u8 mode)
+{
+	struct lp5521_chip *chip = engine_to_lp5521(engine);
+	struct i2c_client *client = chip->client;
+	struct device *dev = &client->dev;
+	int ret = 0;
+
+	/* if in that mode already do nothing, except for run */
+	if (mode == engine->mode && mode != LP5521_CMD_RUN)
+		return 0;
+
+	if (mode == LP5521_CMD_RUN) {
+		ret = lp5521_set_engine_mode(engine, LP5521_CMD_RUN);
+	} else if (mode == LP5521_CMD_LOAD) {
+		lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED);
+		lp5521_set_engine_mode(engine, LP5521_CMD_LOAD);
+
+		ret = sysfs_create_group(&dev->kobj, engine->attributes);
+		if (ret)
+			return ret;
+	} else if (mode == LP5521_CMD_DISABLED) {
+		lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED);
+	}
+
+	/* remove load attribute from sysfs if not in load mode */
+	if (engine->mode == LP5521_CMD_LOAD && mode != LP5521_CMD_LOAD)
+		sysfs_remove_group(&dev->kobj, engine->attributes);
+
+	engine->mode = mode;
+
+	return ret;
+}
+
+static int lp5521_do_store_load(struct lp5521_engine *engine,
+				const char *buf, size_t len)
+{
+	struct lp5521_chip *chip = engine_to_lp5521(engine);
+	struct i2c_client *client = chip->client;
+	int  ret, nrchars, offset = 0, i = 0;
+	char c[3];
+	unsigned cmd;
+	u8 pattern[LP5521_PROGRAM_LENGTH] = {0};
+
+	while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) {
+		/* separate sscanfs because length is working only for %s */
+		ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
+		ret = sscanf(c, "%2x", &cmd);
+		if (ret != 1)
+			goto fail;
+		pattern[i] = (u8)cmd;
+
+		offset += nrchars;
+		i++;
+	}
+
+	/* Each instruction is 16bit long. Check that length is even */
+	if (i % 2)
+		goto fail;
+
+	mutex_lock(&chip->lock);
+	ret = lp5521_load_program(engine, pattern);
+	mutex_unlock(&chip->lock);
+
+	if (ret) {
+		dev_err(&client->dev, "failed loading pattern\n");
+		return ret;
+	}
+
+	return len;
+fail:
+	dev_err(&client->dev, "wrong pattern format\n");
+	return -EINVAL;
+}
+
+static ssize_t store_engine_load(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t len, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	return lp5521_do_store_load(&chip->engines[nr - 1], buf, len);
+}
+
+#define store_load(nr)							\
+static ssize_t store_engine##nr##_load(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     const char *buf, size_t len)	\
+{									\
+	return store_engine_load(dev, attr, buf, len, nr);		\
+}
+store_load(1)
+store_load(2)
+store_load(3)
+
+static ssize_t show_engine_mode(struct device *dev,
+				struct device_attribute *attr,
+				char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	switch (chip->engines[nr - 1].mode) {
+	case LP5521_CMD_RUN:
+		return sprintf(buf, "run\n");
+	case LP5521_CMD_LOAD:
+		return sprintf(buf, "load\n");
+	case LP5521_CMD_DISABLED:
+		return sprintf(buf, "disabled\n");
+	default:
+		return sprintf(buf, "disabled\n");
+	}
+}
+
+#define show_mode(nr)							\
+static ssize_t show_engine##nr##_mode(struct device *dev,		\
+				    struct device_attribute *attr,	\
+				    char *buf)				\
+{									\
+	return show_engine_mode(dev, attr, buf, nr);			\
+}
+show_mode(1)
+show_mode(2)
+show_mode(3)
+
+static ssize_t store_engine_mode(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t len, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	struct lp5521_engine *engine = &chip->engines[nr - 1];
+	mutex_lock(&chip->lock);
+
+	if (!strncmp(buf, "run", 3))
+		lp5521_set_mode(engine, LP5521_CMD_RUN);
+	else if (!strncmp(buf, "load", 4))
+		lp5521_set_mode(engine, LP5521_CMD_LOAD);
+	else if (!strncmp(buf, "disabled", 8))
+		lp5521_set_mode(engine, LP5521_CMD_DISABLED);
+
+	mutex_unlock(&chip->lock);
+	return len;
+}
+
+#define store_mode(nr)							\
+static ssize_t store_engine##nr##_mode(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     const char *buf, size_t len)	\
+{									\
+	return store_engine_mode(dev, attr, buf, len, nr);		\
+}
+store_mode(1)
+store_mode(2)
+store_mode(3)
+
+static ssize_t show_max_current(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5521_led *led = cdev_to_led(led_cdev);
+
+	return sprintf(buf, "%d\n", led->max_current);
+}
+
+static ssize_t show_current(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5521_led *led = cdev_to_led(led_cdev);
+
+	return sprintf(buf, "%d\n", led->led_current);
+}
+
+static ssize_t store_current(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t len)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5521_led *led = cdev_to_led(led_cdev);
+	struct lp5521_chip *chip = led_to_lp5521(led);
+	ssize_t ret;
+	unsigned long curr;
+
+	if (strict_strtoul(buf, 0, &curr))
+		return -EINVAL;
+
+	if (curr > led->max_current)
+		return -EINVAL;
+
+	mutex_lock(&chip->lock);
+	ret = lp5521_set_led_current(chip, led->id, curr);
+	mutex_unlock(&chip->lock);
+
+	if (ret < 0)
+		return ret;
+
+	led->led_current = (u8)curr;
+
+	return len;
+}
+
+static ssize_t lp5521_selftest(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	int ret;
+
+	mutex_lock(&chip->lock);
+	ret = lp5521_run_selftest(chip, buf);
+	mutex_unlock(&chip->lock);
+	return sprintf(buf, "%s\n", ret ? "FAIL" : "OK");
+}
+
+/* led class device attributes */
+static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current);
+static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
+
+static struct attribute *lp5521_led_attributes[] = {
+	&dev_attr_led_current.attr,
+	&dev_attr_max_current.attr,
+	NULL,
+};
+
+static struct attribute_group lp5521_led_attribute_group = {
+	.attrs = lp5521_led_attributes
+};
+
+/* device attributes */
+static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO,
+		   show_engine1_mode, store_engine1_mode);
+static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO,
+		   show_engine2_mode, store_engine2_mode);
+static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO,
+		   show_engine3_mode, store_engine3_mode);
+static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load);
+static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load);
+static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load);
+static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL);
+
+static struct attribute *lp5521_attributes[] = {
+	&dev_attr_engine1_mode.attr,
+	&dev_attr_engine2_mode.attr,
+	&dev_attr_engine3_mode.attr,
+	&dev_attr_selftest.attr,
+	NULL
+};
+
+static struct attribute *lp5521_engine1_attributes[] = {
+	&dev_attr_engine1_load.attr,
+	NULL
+};
+
+static struct attribute *lp5521_engine2_attributes[] = {
+	&dev_attr_engine2_load.attr,
+	NULL
+};
+
+static struct attribute *lp5521_engine3_attributes[] = {
+	&dev_attr_engine3_load.attr,
+	NULL
+};
+
+static const struct attribute_group lp5521_group = {
+	.attrs = lp5521_attributes,
+};
+
+static const struct attribute_group lp5521_engine_group[] = {
+	{.attrs = lp5521_engine1_attributes },
+	{.attrs = lp5521_engine2_attributes },
+	{.attrs = lp5521_engine3_attributes },
+};
+
+static int lp5521_register_sysfs(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	return sysfs_create_group(&dev->kobj, &lp5521_group);
+}
+
+static void lp5521_unregister_sysfs(struct i2c_client *client)
+{
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	struct device *dev = &client->dev;
+	int i;
+
+	sysfs_remove_group(&dev->kobj, &lp5521_group);
+
+	for (i = 0; i <  ARRAY_SIZE(chip->engines); i++) {
+		if (chip->engines[i].mode == LP5521_CMD_LOAD)
+			sysfs_remove_group(&dev->kobj,
+					chip->engines[i].attributes);
+	}
+
+	for (i = 0; i < chip->num_leds; i++)
+		sysfs_remove_group(&chip->leds[i].cdev.dev->kobj,
+				&lp5521_led_attribute_group);
+}
+
+static int __init lp5521_init_led(struct lp5521_led *led,
+				struct i2c_client *client,
+				int chan, struct lp5521_platform_data *pdata)
+{
+	struct device *dev = &client->dev;
+	char name[32];
+	int res;
+
+	if (chan >= LP5521_MAX_LEDS)
+		return -EINVAL;
+
+	if (pdata->led_config[chan].led_current == 0)
+		return 0;
+
+	led->led_current = pdata->led_config[chan].led_current;
+	led->max_current = pdata->led_config[chan].max_current;
+	led->chan_nr = pdata->led_config[chan].chan_nr;
+
+	if (led->chan_nr >= LP5521_MAX_LEDS) {
+		dev_err(dev, "Use channel numbers between 0 and %d\n",
+			LP5521_MAX_LEDS - 1);
+		return -EINVAL;
+	}
+
+	snprintf(name, sizeof(name), "%s:channel%d", client->name, chan);
+	led->cdev.brightness_set = lp5521_set_brightness;
+	led->cdev.name = name;
+	res = led_classdev_register(dev, &led->cdev);
+	if (res < 0) {
+		dev_err(dev, "couldn't register led on channel %d\n", chan);
+		return res;
+	}
+
+	res = sysfs_create_group(&led->cdev.dev->kobj,
+			&lp5521_led_attribute_group);
+	if (res < 0) {
+		dev_err(dev, "couldn't register current attribute\n");
+		led_classdev_unregister(&led->cdev);
+		return res;
+	}
+	return 0;
+}
+
+static int lp5521_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct lp5521_chip		*chip;
+	struct lp5521_platform_data	*pdata;
+	int ret, i, led;
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, chip);
+	chip->client = client;
+
+	pdata = client->dev.platform_data;
+
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data\n");
+		ret = -EINVAL;
+		goto fail1;
+	}
+
+	mutex_init(&chip->lock);
+
+	chip->pdata   = pdata;
+
+	if (pdata->setup_resources) {
+		ret = pdata->setup_resources();
+		if (ret < 0)
+			goto fail1;
+	}
+
+	if (pdata->enable) {
+		pdata->enable(0);
+		usleep_range(1000, 10000);
+		pdata->enable(1);
+		usleep_range(1000, 10000); /* Spec says min 500us */
+	}
+
+	ret = lp5521_detect(client);
+
+	if (ret) {
+		dev_err(&client->dev, "Chip not found\n");
+		goto fail2;
+	}
+
+	dev_info(&client->dev, "%s programmable led chip found\n", id->name);
+
+	ret = lp5521_configure(client, lp5521_engine_group);
+	if (ret < 0) {
+		dev_err(&client->dev, "error configuring chip\n");
+		goto fail2;
+	}
+
+	/* Initialize leds */
+	chip->num_channels = pdata->num_channels;
+	chip->num_leds = 0;
+	led = 0;
+	for (i = 0; i < pdata->num_channels; i++) {
+		/* Do not initialize channels that are not connected */
+		if (pdata->led_config[i].led_current == 0)
+			continue;
+
+		ret = lp5521_init_led(&chip->leds[led], client, i, pdata);
+		if (ret) {
+			dev_err(&client->dev, "error initializing leds\n");
+			goto fail3;
+		}
+		chip->num_leds++;
+
+		chip->leds[led].id = led;
+		/* Set initial LED current */
+		lp5521_set_led_current(chip, led,
+				chip->leds[led].led_current);
+
+		INIT_WORK(&(chip->leds[led].brightness_work),
+			lp5521_led_brightness_work);
+
+		led++;
+	}
+
+	ret = lp5521_register_sysfs(client);
+	if (ret) {
+		dev_err(&client->dev, "registering sysfs failed\n");
+		goto fail3;
+	}
+	return ret;
+fail3:
+	for (i = 0; i < chip->num_leds; i++) {
+		led_classdev_unregister(&chip->leds[i].cdev);
+		cancel_work_sync(&chip->leds[i].brightness_work);
+	}
+fail2:
+	if (pdata->enable)
+		pdata->enable(0);
+	if (pdata->release_resources)
+		pdata->release_resources();
+fail1:
+	kfree(chip);
+	return ret;
+}
+
+static int lp5521_remove(struct i2c_client *client)
+{
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	int i;
+
+	lp5521_unregister_sysfs(client);
+
+	for (i = 0; i < chip->num_leds; i++) {
+		led_classdev_unregister(&chip->leds[i].cdev);
+		cancel_work_sync(&chip->leds[i].brightness_work);
+	}
+
+	if (chip->pdata->enable)
+		chip->pdata->enable(0);
+	if (chip->pdata->release_resources)
+		chip->pdata->release_resources();
+	kfree(chip);
+	return 0;
+}
+
+static const struct i2c_device_id lp5521_id[] = {
+	{ "lp5521", 0 }, /* Three channel chip */
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lp5521_id);
+
+static struct i2c_driver lp5521_driver = {
+	.driver = {
+		.name	= "lp5521",
+	},
+	.probe		= lp5521_probe,
+	.remove		= lp5521_remove,
+	.id_table	= lp5521_id,
+};
+
+static int __init lp5521_init(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&lp5521_driver);
+
+	if (ret < 0)
+		printk(KERN_ALERT "Adding lp5521 driver failed\n");
+
+	return ret;
+}
+
+static void __exit lp5521_exit(void)
+{
+	i2c_del_driver(&lp5521_driver);
+}
+
+module_init(lp5521_init);
+module_exit(lp5521_exit);
+
+MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo");
+MODULE_DESCRIPTION("LP5521 LED engine");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/leds-lp5521.h b/include/linux/leds-lp5521.h
new file mode 100644
index 000000000000..38368d785f08
--- /dev/null
+++ b/include/linux/leds-lp5521.h
@@ -0,0 +1,47 @@
+/*
+ * LP5521 LED chip driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_LP5521_H
+#define __LINUX_LP5521_H
+
+/* See Documentation/leds/leds-lp5521.txt */
+
+struct lp5521_led_config {
+	u8		chan_nr;
+	u8		led_current; /* mA x10, 0 if led is not connected */
+	u8		max_current;
+};
+
+#define LP5521_CLOCK_AUTO	0
+#define LP5521_CLOCK_INT	1
+#define LP5521_CLOCK_EXT	2
+
+struct lp5521_platform_data {
+	struct lp5521_led_config *led_config;
+	u8	num_channels;
+	u8	clock_mode;
+	int	(*setup_resources)(void);
+	void	(*release_resources)(void);
+	void	(*enable)(bool state);
+};
+
+#endif /* __LINUX_LP5521_H */

From 0efba16cc05bfe1f80471886c7a888a4744138cf Mon Sep 17 00:00:00 2001
From: Samu Onkalo <samu.p.onkalo@nokia.com>
Date: Thu, 11 Nov 2010 14:05:22 -0800
Subject: [PATCH 0530/1066] leds: driver for National Semiconductors LP5523
 chip

LP5523 chip is nine channel led driver with programmable engines.  Driver
provides support for that chip for direct access via led class or via
programmable engines.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/leds/leds-lp5523.c  | 1065 +++++++++++++++++++++++++++++++++++
 include/linux/leds-lp5523.h |   47 ++
 2 files changed, 1112 insertions(+)
 create mode 100644 drivers/leds/leds-lp5523.c
 create mode 100644 include/linux/leds-lp5523.h

diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
new file mode 100644
index 000000000000..1e11fcc08b28
--- /dev/null
+++ b/drivers/leds/leds-lp5523.c
@@ -0,0 +1,1065 @@
+/*
+ * lp5523.c - LP5523 LED Driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/leds.h>
+#include <linux/leds-lp5523.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#define LP5523_REG_ENABLE		0x00
+#define LP5523_REG_OP_MODE		0x01
+#define LP5523_REG_RATIOMETRIC_MSB	0x02
+#define LP5523_REG_RATIOMETRIC_LSB	0x03
+#define LP5523_REG_ENABLE_LEDS_MSB	0x04
+#define LP5523_REG_ENABLE_LEDS_LSB	0x05
+#define LP5523_REG_LED_CNTRL_BASE	0x06
+#define LP5523_REG_LED_PWM_BASE		0x16
+#define LP5523_REG_LED_CURRENT_BASE	0x26
+#define LP5523_REG_CONFIG		0x36
+#define LP5523_REG_CHANNEL1_PC		0x37
+#define LP5523_REG_CHANNEL2_PC		0x38
+#define LP5523_REG_CHANNEL3_PC		0x39
+#define LP5523_REG_STATUS		0x3a
+#define LP5523_REG_GPO			0x3b
+#define LP5523_REG_VARIABLE		0x3c
+#define LP5523_REG_RESET		0x3d
+#define LP5523_REG_TEMP_CTRL		0x3e
+#define LP5523_REG_TEMP_READ		0x3f
+#define LP5523_REG_TEMP_WRITE		0x40
+#define LP5523_REG_LED_TEST_CTRL	0x41
+#define LP5523_REG_LED_TEST_ADC		0x42
+#define LP5523_REG_ENG1_VARIABLE	0x45
+#define LP5523_REG_ENG2_VARIABLE	0x46
+#define LP5523_REG_ENG3_VARIABLE	0x47
+#define LP5523_REG_MASTER_FADER1	0x48
+#define LP5523_REG_MASTER_FADER2	0x49
+#define LP5523_REG_MASTER_FADER3	0x4a
+#define LP5523_REG_CH1_PROG_START	0x4c
+#define LP5523_REG_CH2_PROG_START	0x4d
+#define LP5523_REG_CH3_PROG_START	0x4e
+#define LP5523_REG_PROG_PAGE_SEL	0x4f
+#define LP5523_REG_PROG_MEM		0x50
+
+#define LP5523_CMD_LOAD			0x15 /* 00010101 */
+#define LP5523_CMD_RUN			0x2a /* 00101010 */
+#define LP5523_CMD_DISABLED		0x00 /* 00000000 */
+
+#define LP5523_ENABLE			0x40
+#define LP5523_AUTO_INC			0x40
+#define LP5523_PWR_SAVE			0x20
+#define LP5523_PWM_PWR_SAVE		0x04
+#define LP5523_CP_1			0x08
+#define LP5523_CP_1_5			0x10
+#define LP5523_CP_AUTO			0x18
+#define LP5523_INT_CLK			0x01
+#define LP5523_AUTO_CLK			0x02
+#define LP5523_EN_LEDTEST		0x80
+#define LP5523_LEDTEST_DONE		0x80
+
+#define LP5523_DEFAULT_CURRENT		50 /* microAmps */
+#define LP5523_PROGRAM_LENGTH		32 /* in bytes */
+#define LP5523_PROGRAM_PAGES		6
+#define LP5523_ADC_SHORTCIRC_LIM	80
+
+#define LP5523_LEDS			9
+#define LP5523_ENGINES			3
+
+#define LP5523_ENG_MASK_BASE		0x30 /* 00110000 */
+
+#define LP5523_ENG_STATUS_MASK          0x07 /* 00000111 */
+
+#define LP5523_IRQ_FLAGS                IRQF_TRIGGER_FALLING
+
+#define LP5523_EXT_CLK_USED		0x08
+
+#define LED_ACTIVE(mux, led)		(!!(mux & (0x0001 << led)))
+#define SHIFT_MASK(id)			(((id) - 1) * 2)
+
+struct lp5523_engine {
+	const struct attribute_group *attributes;
+	int		id;
+	u8		mode;
+	u8		prog_page;
+	u8		mux_page;
+	u16		led_mux;
+	u8		engine_mask;
+};
+
+struct lp5523_led {
+	int			id;
+	u8			chan_nr;
+	u8			led_current;
+	u8			max_current;
+	struct led_classdev     cdev;
+	struct work_struct	brightness_work;
+	u8			brightness;
+};
+
+struct lp5523_chip {
+	struct mutex		lock; /* Serialize control */
+	struct i2c_client	*client;
+	struct lp5523_engine	engines[LP5523_ENGINES];
+	struct lp5523_led	leds[LP5523_LEDS];
+	struct lp5523_platform_data *pdata;
+	u8			num_channels;
+	u8			num_leds;
+};
+
+#define cdev_to_led(c)          container_of(c, struct lp5523_led, cdev)
+
+static struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
+{
+	return container_of(engine, struct lp5523_chip,
+			    engines[engine->id - 1]);
+}
+
+static struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
+{
+	return container_of(led, struct lp5523_chip,
+			    leds[led->id]);
+}
+
+static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode);
+static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode);
+static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern);
+
+static void lp5523_led_brightness_work(struct work_struct *work);
+
+static int lp5523_write(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static int lp5523_read(struct i2c_client *client, u8 reg, u8 *buf)
+{
+	s32 ret = i2c_smbus_read_byte_data(client, reg);
+
+	if (ret < 0)
+		return -EIO;
+
+	*buf = ret;
+	return 0;
+}
+
+static int lp5523_detect(struct i2c_client *client)
+{
+	int ret;
+	u8 buf;
+
+	ret = lp5523_write(client, LP5523_REG_ENABLE, 0x40);
+	if (ret)
+		return ret;
+	ret = lp5523_read(client, LP5523_REG_ENABLE, &buf);
+	if (ret)
+		return ret;
+	if (buf == 0x40)
+		return 0;
+	else
+		return -ENODEV;
+}
+
+static int lp5523_configure(struct i2c_client *client)
+{
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	int ret = 0;
+	u8 status;
+
+	/* one pattern per engine setting led mux start and stop addresses */
+	u8 pattern[][LP5523_PROGRAM_LENGTH] =  {
+		{ 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
+		{ 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
+		{ 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
+	};
+
+	lp5523_write(client, LP5523_REG_RESET, 0xff);
+
+	usleep_range(10000, 100000);
+
+	ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE);
+	/* Chip startup time after reset is 500 us */
+	usleep_range(1000, 10000);
+
+	ret |= lp5523_write(client, LP5523_REG_CONFIG,
+			    LP5523_AUTO_INC | LP5523_PWR_SAVE |
+			    LP5523_CP_AUTO | LP5523_AUTO_CLK |
+			    LP5523_PWM_PWR_SAVE);
+
+	/* turn on all leds */
+	ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_MSB, 0x01);
+	ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
+
+	/* hardcode 32 bytes of memory for each engine from program memory */
+	ret |= lp5523_write(client, LP5523_REG_CH1_PROG_START, 0x00);
+	ret |= lp5523_write(client, LP5523_REG_CH2_PROG_START, 0x10);
+	ret |= lp5523_write(client, LP5523_REG_CH3_PROG_START, 0x20);
+
+	/* write led mux address space for each channel */
+	ret |= lp5523_load_program(&chip->engines[0], pattern[0]);
+	ret |= lp5523_load_program(&chip->engines[1], pattern[1]);
+	ret |= lp5523_load_program(&chip->engines[2], pattern[2]);
+
+	if (ret) {
+		dev_err(&client->dev, "could not load mux programs\n");
+		return -1;
+	}
+
+	/* set all engines exec state and mode to run 00101010 */
+	ret |= lp5523_write(client, LP5523_REG_ENABLE,
+			    (LP5523_CMD_RUN | LP5523_ENABLE));
+
+	ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_RUN);
+
+	if (ret) {
+		dev_err(&client->dev, "could not start mux programs\n");
+		return -1;
+	}
+
+	/* Wait 3ms and check the engine status */
+	usleep_range(3000, 20000);
+	lp5523_read(client, LP5523_REG_STATUS, &status);
+	status &= LP5523_ENG_STATUS_MASK;
+
+	if (status == LP5523_ENG_STATUS_MASK) {
+		dev_dbg(&client->dev, "all engines configured\n");
+	} else {
+		dev_info(&client->dev, "status == %x\n", status);
+		dev_err(&client->dev, "cound not configure LED engine\n");
+		return -1;
+	}
+
+	dev_info(&client->dev, "disabling engines\n");
+
+	ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_DISABLED);
+
+	return ret;
+}
+
+static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode)
+{
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+	int ret;
+	u8 engine_state;
+
+	ret = lp5523_read(client, LP5523_REG_OP_MODE, &engine_state);
+	if (ret)
+		goto fail;
+
+	engine_state &= ~(engine->engine_mask);
+
+	/* set mode only for this engine */
+	mode &= engine->engine_mask;
+
+	engine_state |= mode;
+
+	ret |= lp5523_write(client, LP5523_REG_OP_MODE, engine_state);
+fail:
+	return ret;
+}
+
+static int lp5523_load_mux(struct lp5523_engine *engine, u16 mux)
+{
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+	int ret = 0;
+
+	ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+	ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, engine->mux_page);
+	ret |= lp5523_write(client, LP5523_REG_PROG_MEM,
+			    (u8)(mux >> 8));
+	ret |= lp5523_write(client, LP5523_REG_PROG_MEM + 1, (u8)(mux));
+	engine->led_mux = mux;
+
+	return ret;
+}
+
+static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern)
+{
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+
+	int ret = 0;
+
+	ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+	ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL,
+			    engine->prog_page);
+	ret |= i2c_smbus_write_i2c_block_data(client, LP5523_REG_PROG_MEM,
+					      LP5523_PROGRAM_LENGTH, pattern);
+
+	return ret;
+}
+
+static int lp5523_run_program(struct lp5523_engine *engine)
+{
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	ret = lp5523_write(client, LP5523_REG_ENABLE,
+					LP5523_CMD_RUN | LP5523_ENABLE);
+	if (ret)
+		goto fail;
+
+	ret = lp5523_set_engine_mode(engine, LP5523_CMD_RUN);
+fail:
+	return ret;
+}
+
+static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
+{
+	int i;
+	u16 tmp_mux = 0;
+	len = len < LP5523_LEDS ? len : LP5523_LEDS;
+	for (i = 0; i < len; i++) {
+		switch (buf[i]) {
+		case '1':
+			tmp_mux |= (1 << i);
+			break;
+		case '0':
+			break;
+		case '\n':
+			i = len;
+			break;
+		default:
+			return -1;
+		}
+	}
+	*mux = tmp_mux;
+
+	return 0;
+}
+
+static void lp5523_mux_to_array(u16 led_mux, char *array)
+{
+	int i, pos = 0;
+	for (i = 0; i < LP5523_LEDS; i++)
+		pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
+
+	array[pos] = '\0';
+}
+
+/*--------------------------------------------------------------*/
+/*			Sysfs interface				*/
+/*--------------------------------------------------------------*/
+
+static ssize_t show_engine_leds(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	char mux[LP5523_LEDS + 1];
+
+	lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
+
+	return sprintf(buf, "%s\n", mux);
+}
+
+#define show_leds(nr)							\
+static ssize_t show_engine##nr##_leds(struct device *dev,		\
+			    struct device_attribute *attr,		\
+			    char *buf)					\
+{									\
+	return show_engine_leds(dev, attr, buf, nr);			\
+}
+show_leds(1)
+show_leds(2)
+show_leds(3)
+
+static ssize_t store_engine_leds(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t len, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	u16 mux = 0;
+
+	if (lp5523_mux_parse(buf, &mux, len))
+		return -EINVAL;
+
+	if (lp5523_load_mux(&chip->engines[nr - 1], mux))
+		return -EINVAL;
+
+	return len;
+}
+
+#define store_leds(nr)						\
+static ssize_t store_engine##nr##_leds(struct device *dev,	\
+			     struct device_attribute *attr,	\
+			     const char *buf, size_t len)	\
+{								\
+	return store_engine_leds(dev, attr, buf, len, nr);	\
+}
+store_leds(1)
+store_leds(2)
+store_leds(3)
+
+static ssize_t lp5523_selftest(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	int i, ret, pos = 0;
+	int led = 0;
+	u8 status, adc, vdd;
+
+	mutex_lock(&chip->lock);
+
+	ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+	if (ret < 0)
+		goto fail;
+
+	/* Check that ext clock is really in use if requested */
+	if ((chip->pdata) && (chip->pdata->clock_mode == LP5523_CLOCK_EXT))
+		if  ((status & LP5523_EXT_CLK_USED) == 0)
+			goto fail;
+
+	/* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
+	lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL,
+				    LP5523_EN_LEDTEST | 16);
+	usleep_range(3000, 10000);
+	ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+	if (!(status & LP5523_LEDTEST_DONE))
+		usleep_range(3000, 10000);
+
+	ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd);
+	vdd--;	/* There may be some fluctuation in measurement */
+
+	for (i = 0; i < LP5523_LEDS; i++) {
+		/* Skip non-existing channels */
+		if (chip->pdata->led_config[i].led_current == 0)
+			continue;
+
+		/* Set default current */
+		lp5523_write(chip->client,
+			LP5523_REG_LED_CURRENT_BASE + i,
+			chip->pdata->led_config[i].led_current);
+
+		lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff);
+		/* let current stabilize 2ms before measurements start */
+		usleep_range(2000, 10000);
+		lp5523_write(chip->client,
+			     LP5523_REG_LED_TEST_CTRL,
+			     LP5523_EN_LEDTEST | i);
+		/* ledtest takes 2.7ms */
+		usleep_range(3000, 10000);
+		ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+		if (!(status & LP5523_LEDTEST_DONE))
+			usleep_range(3000, 10000);
+		ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc);
+
+		if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
+			pos += sprintf(buf + pos, "LED %d FAIL\n", i);
+
+		lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0x00);
+
+		/* Restore current */
+		lp5523_write(chip->client,
+			LP5523_REG_LED_CURRENT_BASE + i,
+			chip->leds[led].led_current);
+		led++;
+	}
+	if (pos == 0)
+		pos = sprintf(buf, "OK\n");
+	goto release_lock;
+fail:
+	pos = sprintf(buf, "FAIL\n");
+
+release_lock:
+	mutex_unlock(&chip->lock);
+
+	return pos;
+}
+
+static void lp5523_set_brightness(struct led_classdev *cdev,
+			     enum led_brightness brightness)
+{
+	struct lp5523_led *led = cdev_to_led(cdev);
+
+	led->brightness = (u8)brightness;
+
+	schedule_work(&led->brightness_work);
+}
+
+static void lp5523_led_brightness_work(struct work_struct *work)
+{
+	struct lp5523_led *led = container_of(work,
+					      struct lp5523_led,
+					      brightness_work);
+	struct lp5523_chip *chip = led_to_lp5523(led);
+	struct i2c_client *client = chip->client;
+
+	mutex_lock(&chip->lock);
+
+	lp5523_write(client, LP5523_REG_LED_PWM_BASE + led->chan_nr,
+		     led->brightness);
+
+	mutex_unlock(&chip->lock);
+}
+
+static int lp5523_do_store_load(struct lp5523_engine *engine,
+				const char *buf, size_t len)
+{
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+	int  ret, nrchars, offset = 0, i = 0;
+	char c[3];
+	unsigned cmd;
+	u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
+
+	while ((offset < len - 1) && (i < LP5523_PROGRAM_LENGTH)) {
+		/* separate sscanfs because length is working only for %s */
+		ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
+		ret = sscanf(c, "%2x", &cmd);
+		if (ret != 1)
+			goto fail;
+		pattern[i] = (u8)cmd;
+
+		offset += nrchars;
+		i++;
+	}
+
+	/* Each instruction is 16bit long. Check that length is even */
+	if (i % 2)
+		goto fail;
+
+	mutex_lock(&chip->lock);
+
+	ret = lp5523_load_program(engine, pattern);
+	mutex_unlock(&chip->lock);
+
+	if (ret) {
+		dev_err(&client->dev, "failed loading pattern\n");
+		return ret;
+	}
+
+	return len;
+fail:
+	dev_err(&client->dev, "wrong pattern format\n");
+	return -EINVAL;
+}
+
+static ssize_t store_engine_load(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t len, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	return lp5523_do_store_load(&chip->engines[nr - 1], buf, len);
+}
+
+#define store_load(nr)							\
+static ssize_t store_engine##nr##_load(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     const char *buf, size_t len)	\
+{									\
+	return store_engine_load(dev, attr, buf, len, nr);		\
+}
+store_load(1)
+store_load(2)
+store_load(3)
+
+static ssize_t show_engine_mode(struct device *dev,
+				struct device_attribute *attr,
+				char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	switch (chip->engines[nr - 1].mode) {
+	case LP5523_CMD_RUN:
+		return sprintf(buf, "run\n");
+	case LP5523_CMD_LOAD:
+		return sprintf(buf, "load\n");
+	case LP5523_CMD_DISABLED:
+		return sprintf(buf, "disabled\n");
+	default:
+		return sprintf(buf, "disabled\n");
+	}
+}
+
+#define show_mode(nr)							\
+static ssize_t show_engine##nr##_mode(struct device *dev,		\
+				    struct device_attribute *attr,	\
+				    char *buf)				\
+{									\
+	return show_engine_mode(dev, attr, buf, nr);			\
+}
+show_mode(1)
+show_mode(2)
+show_mode(3)
+
+static ssize_t store_engine_mode(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t len, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	struct lp5523_engine *engine = &chip->engines[nr - 1];
+	mutex_lock(&chip->lock);
+
+	if (!strncmp(buf, "run", 3))
+		lp5523_set_mode(engine, LP5523_CMD_RUN);
+	else if (!strncmp(buf, "load", 4))
+		lp5523_set_mode(engine, LP5523_CMD_LOAD);
+	else if (!strncmp(buf, "disabled", 8))
+		lp5523_set_mode(engine, LP5523_CMD_DISABLED);
+
+	mutex_unlock(&chip->lock);
+	return len;
+}
+
+#define store_mode(nr)							\
+static ssize_t store_engine##nr##_mode(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     const char *buf, size_t len)	\
+{									\
+	return store_engine_mode(dev, attr, buf, len, nr);		\
+}
+store_mode(1)
+store_mode(2)
+store_mode(3)
+
+static ssize_t show_max_current(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5523_led *led = cdev_to_led(led_cdev);
+
+	return sprintf(buf, "%d\n", led->max_current);
+}
+
+static ssize_t show_current(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5523_led *led = cdev_to_led(led_cdev);
+
+	return sprintf(buf, "%d\n", led->led_current);
+}
+
+static ssize_t store_current(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t len)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5523_led *led = cdev_to_led(led_cdev);
+	struct lp5523_chip *chip = led_to_lp5523(led);
+	ssize_t ret;
+	unsigned long curr;
+
+	if (strict_strtoul(buf, 0, &curr))
+		return -EINVAL;
+
+	if (curr > led->max_current)
+		return -EINVAL;
+
+	mutex_lock(&chip->lock);
+	ret = lp5523_write(chip->client,
+			LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
+			(u8)curr);
+	mutex_unlock(&chip->lock);
+
+	if (ret < 0)
+		return ret;
+
+	led->led_current = (u8)curr;
+
+	return len;
+}
+
+/* led class device attributes */
+static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current);
+static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
+
+static struct attribute *lp5523_led_attributes[] = {
+	&dev_attr_led_current.attr,
+	&dev_attr_max_current.attr,
+	NULL,
+};
+
+static struct attribute_group lp5523_led_attribute_group = {
+	.attrs = lp5523_led_attributes
+};
+
+/* device attributes */
+static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO,
+		   show_engine1_mode, store_engine1_mode);
+static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO,
+		   show_engine2_mode, store_engine2_mode);
+static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO,
+		   show_engine3_mode, store_engine3_mode);
+static DEVICE_ATTR(engine1_leds, S_IRUGO | S_IWUGO,
+		   show_engine1_leds, store_engine1_leds);
+static DEVICE_ATTR(engine2_leds, S_IRUGO | S_IWUGO,
+		   show_engine2_leds, store_engine2_leds);
+static DEVICE_ATTR(engine3_leds, S_IRUGO | S_IWUGO,
+		   show_engine3_leds, store_engine3_leds);
+static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load);
+static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load);
+static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load);
+static DEVICE_ATTR(selftest, S_IRUGO, lp5523_selftest, NULL);
+
+static struct attribute *lp5523_attributes[] = {
+	&dev_attr_engine1_mode.attr,
+	&dev_attr_engine2_mode.attr,
+	&dev_attr_engine3_mode.attr,
+	&dev_attr_selftest.attr,
+	NULL
+};
+
+static struct attribute *lp5523_engine1_attributes[] = {
+	&dev_attr_engine1_load.attr,
+	&dev_attr_engine1_leds.attr,
+	NULL
+};
+
+static struct attribute *lp5523_engine2_attributes[] = {
+	&dev_attr_engine2_load.attr,
+	&dev_attr_engine2_leds.attr,
+	NULL
+};
+
+static struct attribute *lp5523_engine3_attributes[] = {
+	&dev_attr_engine3_load.attr,
+	&dev_attr_engine3_leds.attr,
+	NULL
+};
+
+static const struct attribute_group lp5523_group = {
+	.attrs = lp5523_attributes,
+};
+
+static const struct attribute_group lp5523_engine_group[] = {
+	{.attrs = lp5523_engine1_attributes },
+	{.attrs = lp5523_engine2_attributes },
+	{.attrs = lp5523_engine3_attributes },
+};
+
+static int lp5523_register_sysfs(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	int ret;
+
+	ret = sysfs_create_group(&dev->kobj, &lp5523_group);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void lp5523_unregister_sysfs(struct i2c_client *client)
+{
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	struct device *dev = &client->dev;
+	int i;
+
+	sysfs_remove_group(&dev->kobj, &lp5523_group);
+
+	for (i = 0; i < ARRAY_SIZE(chip->engines); i++)
+		if (chip->engines[i].mode == LP5523_CMD_LOAD)
+			sysfs_remove_group(&dev->kobj, &lp5523_engine_group[i]);
+
+	for (i = 0; i < chip->num_leds; i++)
+		sysfs_remove_group(&chip->leds[i].cdev.dev->kobj,
+				&lp5523_led_attribute_group);
+}
+
+/*--------------------------------------------------------------*/
+/*			Set chip operating mode			*/
+/*--------------------------------------------------------------*/
+static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode)
+{
+	/*  engine to chip */
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+	struct device *dev = &client->dev;
+	int ret = 0;
+
+	/* if in that mode already do nothing, except for run */
+	if (mode == engine->mode && mode != LP5523_CMD_RUN)
+		return 0;
+
+	if (mode == LP5523_CMD_RUN) {
+		ret = lp5523_run_program(engine);
+	} else if (mode == LP5523_CMD_LOAD) {
+		lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
+		lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+		ret = sysfs_create_group(&dev->kobj, engine->attributes);
+		if (ret)
+			return ret;
+	} else if (mode == LP5523_CMD_DISABLED) {
+		lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
+	}
+
+	/* remove load attribute from sysfs if not in load mode */
+	if (engine->mode == LP5523_CMD_LOAD && mode != LP5523_CMD_LOAD)
+		sysfs_remove_group(&dev->kobj, engine->attributes);
+
+	engine->mode = mode;
+
+	return ret;
+}
+
+/*--------------------------------------------------------------*/
+/*			Probe, Attach, Remove			*/
+/*--------------------------------------------------------------*/
+static int __init lp5523_init_engine(struct lp5523_engine *engine, int id)
+{
+	if (id < 1 || id > LP5523_ENGINES)
+		return -1;
+	engine->id = id;
+	engine->engine_mask = LP5523_ENG_MASK_BASE >> SHIFT_MASK(id);
+	engine->prog_page = id - 1;
+	engine->mux_page = id + 2;
+	engine->attributes = &lp5523_engine_group[id - 1];
+
+	return 0;
+}
+
+static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev,
+			   int chan, struct lp5523_platform_data *pdata)
+{
+	char name[32];
+	int res;
+
+	if (chan >= LP5523_LEDS)
+		return -EINVAL;
+
+	if (pdata->led_config[chan].led_current) {
+		led->led_current = pdata->led_config[chan].led_current;
+		led->max_current = pdata->led_config[chan].max_current;
+		led->chan_nr = pdata->led_config[chan].chan_nr;
+
+		if (led->chan_nr >= LP5523_LEDS) {
+			dev_err(dev, "Use channel numbers between 0 and %d\n",
+				LP5523_LEDS - 1);
+			return -EINVAL;
+		}
+
+		snprintf(name, 32, "lp5523:channel%d", chan);
+
+		led->cdev.name = name;
+		led->cdev.brightness_set = lp5523_set_brightness;
+		res = led_classdev_register(dev, &led->cdev);
+		if (res < 0) {
+			dev_err(dev, "couldn't register led on channel %d\n",
+				chan);
+			return res;
+		}
+		res = sysfs_create_group(&led->cdev.dev->kobj,
+				&lp5523_led_attribute_group);
+		if (res < 0) {
+			dev_err(dev, "couldn't register current attribute\n");
+			led_classdev_unregister(&led->cdev);
+			return res;
+		}
+	} else {
+		led->led_current = 0;
+	}
+	return 0;
+}
+
+static struct i2c_driver lp5523_driver;
+
+static int lp5523_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct lp5523_chip		*chip;
+	struct lp5523_platform_data	*pdata;
+	int ret, i, led;
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, chip);
+	chip->client = client;
+
+	pdata = client->dev.platform_data;
+
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data\n");
+		ret = -EINVAL;
+		goto fail1;
+	}
+
+	mutex_init(&chip->lock);
+
+	chip->pdata   = pdata;
+
+	if (pdata->setup_resources) {
+		ret = pdata->setup_resources();
+		if (ret < 0)
+			goto fail1;
+	}
+
+	if (pdata->enable) {
+		pdata->enable(0);
+		usleep_range(1000, 10000);
+		pdata->enable(1);
+		usleep_range(1000, 10000); /* Spec says min 500us */
+	}
+
+	ret = lp5523_detect(client);
+	if (ret)
+		goto fail2;
+
+	dev_info(&client->dev, "LP5523 Programmable led chip found\n");
+
+	/* Initialize engines */
+	for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
+		ret = lp5523_init_engine(&chip->engines[i], i + 1);
+		if (ret) {
+			dev_err(&client->dev, "error initializing engine\n");
+			goto fail2;
+		}
+	}
+	ret = lp5523_configure(client);
+	if (ret < 0) {
+		dev_err(&client->dev, "error configuring chip\n");
+		goto fail2;
+	}
+
+	/* Initialize leds */
+	chip->num_channels = pdata->num_channels;
+	chip->num_leds = 0;
+	led = 0;
+	for (i = 0; i < pdata->num_channels; i++) {
+		/* Do not initialize channels that are not connected */
+		if (pdata->led_config[i].led_current == 0)
+			continue;
+
+		ret = lp5523_init_led(&chip->leds[led], &client->dev, i, pdata);
+		if (ret) {
+			dev_err(&client->dev, "error initializing leds\n");
+			goto fail3;
+		}
+		chip->num_leds++;
+
+		chip->leds[led].id = led;
+		/* Set LED current */
+		lp5523_write(client,
+			  LP5523_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr,
+			  chip->leds[led].led_current);
+
+		INIT_WORK(&(chip->leds[led].brightness_work),
+			lp5523_led_brightness_work);
+
+		led++;
+	}
+
+	ret = lp5523_register_sysfs(client);
+	if (ret) {
+		dev_err(&client->dev, "registering sysfs failed\n");
+		goto fail3;
+	}
+	return ret;
+fail3:
+	for (i = 0; i < chip->num_leds; i++) {
+		led_classdev_unregister(&chip->leds[i].cdev);
+		cancel_work_sync(&chip->leds[i].brightness_work);
+	}
+fail2:
+	if (pdata->enable)
+		pdata->enable(0);
+	if (pdata->release_resources)
+		pdata->release_resources();
+fail1:
+	kfree(chip);
+	return ret;
+}
+
+static int lp5523_remove(struct i2c_client *client)
+{
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	int i;
+
+	lp5523_unregister_sysfs(client);
+
+	for (i = 0; i < chip->num_leds; i++) {
+		led_classdev_unregister(&chip->leds[i].cdev);
+		cancel_work_sync(&chip->leds[i].brightness_work);
+	}
+
+	if (chip->pdata->enable)
+		chip->pdata->enable(0);
+	if (chip->pdata->release_resources)
+		chip->pdata->release_resources();
+	kfree(chip);
+	return 0;
+}
+
+static const struct i2c_device_id lp5523_id[] = {
+	{ "lp5523", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, lp5523_id);
+
+static struct i2c_driver lp5523_driver = {
+	.driver = {
+		.name	= "lp5523",
+	},
+	.probe		= lp5523_probe,
+	.remove		= lp5523_remove,
+	.id_table	= lp5523_id,
+};
+
+static int __init lp5523_init(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&lp5523_driver);
+
+	if (ret < 0)
+		printk(KERN_ALERT "Adding lp5523 driver failed\n");
+
+	return ret;
+}
+
+static void __exit lp5523_exit(void)
+{
+	i2c_del_driver(&lp5523_driver);
+}
+
+module_init(lp5523_init);
+module_exit(lp5523_exit);
+
+MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>");
+MODULE_DESCRIPTION("LP5523 LED engine");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/leds-lp5523.h b/include/linux/leds-lp5523.h
new file mode 100644
index 000000000000..796747637b80
--- /dev/null
+++ b/include/linux/leds-lp5523.h
@@ -0,0 +1,47 @@
+/*
+ * LP5523 LED Driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_LP5523_H
+#define __LINUX_LP5523_H
+
+/* See Documentation/leds/leds-lp5523.txt */
+
+struct lp5523_led_config {
+	u8		chan_nr;
+	u8		led_current; /* mA x10, 0 if led is not connected */
+	u8		max_current;
+};
+
+#define LP5523_CLOCK_AUTO	0
+#define LP5523_CLOCK_INT	1
+#define LP5523_CLOCK_EXT	2
+
+struct lp5523_platform_data {
+	struct lp5523_led_config *led_config;
+	u8	num_channels;
+	u8	clock_mode;
+	int	(*setup_resources)(void);
+	void	(*release_resources)(void);
+	void	(*enable)(bool state);
+};
+
+#endif /* __LINUX_LP5523_H */

From f4920f673c4260de966b5f72c5524de0dabb7ffe Mon Sep 17 00:00:00 2001
From: Samu Onkalo <samu.p.onkalo@nokia.com>
Date: Thu, 11 Nov 2010 14:05:23 -0800
Subject: [PATCH 0531/1066] leds: update LP552x support Kconfig and Makefile

Provide configuration and compilation support for LP5521 and LP5523

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/leds/Kconfig  | 18 ++++++++++++++++++
 drivers/leds/Makefile |  2 ++
 2 files changed, 20 insertions(+)

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 56b4b7a5ff31..77b8fd20cd90 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -176,6 +176,24 @@ config LEDS_LP3944
 	  To compile this driver as a module, choose M here: the
 	  module will be called leds-lp3944.
 
+config LEDS_LP5521
+	tristate "LED Support for N.S. LP5521 LED driver chip"
+	depends on LEDS_CLASS && I2C
+	help
+	  If you say yes here you get support for the National Semiconductor
+	  LP5521 LED driver. It is 3 channel chip with programmable engines.
+	  Driver provides direct control via LED class and interface for
+	  programming the engines.
+
+config LEDS_LP5523
+	tristate "LED Support for N.S. LP5523 LED driver chip"
+	depends on LEDS_CLASS && I2C
+	help
+	  If you say yes here you get support for the National Semiconductor
+	  LP5523 LED driver. It is 9 channel chip with programmable engines.
+	  Driver provides direct control via LED class and interface for
+	  programming the engines.
+
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook"
 	depends on X86 && SERIO_I8042 && DMI
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 9c96db40ef6d..aae6989ff6b6 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -23,6 +23,8 @@ obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunfire.o
 obj-$(CONFIG_LEDS_PCA9532)		+= leds-pca9532.o
 obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
 obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
+obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
+obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
 obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
 obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o

From 5991e154b2d09ad28af9dc7d3226b35dbbc052c3 Mon Sep 17 00:00:00 2001
From: Samu Onkalo <samu.p.onkalo@nokia.com>
Date: Thu, 11 Nov 2010 14:05:23 -0800
Subject: [PATCH 0532/1066] Documentation: led drivers lp5521 and lp5523

Create sub directory Documentation/leds and add short documentation for
LP5521 and LP5523 drivers.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/leds/leds-lp5521.txt | 88 ++++++++++++++++++++++++++++++
 Documentation/leds/leds-lp5523.txt | 83 ++++++++++++++++++++++++++++
 2 files changed, 171 insertions(+)
 create mode 100644 Documentation/leds/leds-lp5521.txt
 create mode 100644 Documentation/leds/leds-lp5523.txt

diff --git a/Documentation/leds/leds-lp5521.txt b/Documentation/leds/leds-lp5521.txt
new file mode 100644
index 000000000000..c4d8d151e0fe
--- /dev/null
+++ b/Documentation/leds/leds-lp5521.txt
@@ -0,0 +1,88 @@
+Kernel driver for lp5521
+========================
+
+* National Semiconductor LP5521 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5521.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+
+LP5521 can drive up to 3 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5521:channelx, where x is 0 .. 2
+
+All three channels can be also controlled using the engine micro programs.
+More details of the instructions can be found from the public data sheet.
+
+Control interface for the engines:
+x is 1 .. 3
+enginex_mode : disabled, load, run
+enginex_load : store program (visible only in engine load mode)
+
+Example (start to blink the channel 2 led):
+cd   /sys/class/leds/lp5521:channel2/device
+echo "load" > engine3_mode
+echo "037f4d0003ff6000" > engine3_load
+echo "run" > engine3_mode
+
+stop the engine:
+echo "disabled" > engine3_mode
+
+sysfs contains a selftest entry.
+The test communicates with the chip and checks that
+the clock mode is automatically set to the requested one.
+
+Each channel has its own led current settings.
+/sys/class/leds/lp5521:channel0/led_current - RW
+/sys/class/leds/lp5521:channel0/max_current - RO
+Format: 10x mA i.e 10 means 1.0 mA
+
+example platform data:
+
+Note: chan_nr can have values between 0 and 2.
+
+static struct lp5521_led_config lp5521_led_config[] = {
+        {
+                .chan_nr        = 0,
+                .led_current    = 50,
+		.max_current    = 130,
+        }, {
+                .chan_nr        = 1,
+                .led_current    = 0,
+		.max_current    = 130,
+        }, {
+                .chan_nr        = 2,
+                .led_current    = 0,
+		.max_current    = 130,
+        }
+};
+
+static int lp5521_setup(void)
+{
+	/* setup HW resources */
+}
+
+static void lp5521_release(void)
+{
+	/* Release HW resources */
+}
+
+static void lp5521_enable(bool state)
+{
+	/* Control of chip enable signal */
+}
+
+static struct lp5521_platform_data lp5521_platform_data = {
+        .led_config     = lp5521_led_config,
+        .num_channels   = ARRAY_SIZE(lp5521_led_config),
+        .clock_mode     = LP5521_CLOCK_EXT,
+        .setup_resources   = lp5521_setup,
+        .release_resources = lp5521_release,
+        .enable            = lp5521_enable,
+};
+
+If the current is set to 0 in the platform data, that channel is
+disabled and it is not visible in the sysfs.
diff --git a/Documentation/leds/leds-lp5523.txt b/Documentation/leds/leds-lp5523.txt
new file mode 100644
index 000000000000..fad2feb8b7ce
--- /dev/null
+++ b/Documentation/leds/leds-lp5523.txt
@@ -0,0 +1,83 @@
+Kernel driver for lp5523
+========================
+
+* National Semiconductor LP5523 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5523.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+LP5523 can drive up to 9 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5523:channelx where x is 0...8
+
+The chip provides 3 engines. Each engine can control channels without
+interaction from the main CPU. Details of the micro engine code can be found
+from the public data sheet. Leds can be muxed to different channels.
+
+Control interface for the engines:
+x is 1 .. 3
+enginex_mode : disabled, load, run
+enginex_load : microcode load (visible only in load mode)
+enginex_leds : led mux control (visible only in load mode)
+
+cd /sys/class/leds/lp5523:channel2/device
+echo "load" > engine3_mode
+echo "9d80400004ff05ff437f0000" > engine3_load
+echo "111111111" > engine3_leds
+echo "run" > engine3_mode
+
+sysfs contains a selftest entry. It measures each channel
+voltage level and checks if it looks reasonable. If the level is too high,
+the led is missing; if the level is too low, there is a short circuit.
+
+Selftest uses always the current from the platform data.
+
+Each channel contains led current settings.
+/sys/class/leds/lp5523:channel2/led_current - RW
+/sys/class/leds/lp5523:channel2/max_current - RO
+Format: 10x mA i.e 10 means 1.0 mA
+
+Example platform data:
+
+Note - chan_nr can have values between 0 and 8.
+
+static struct lp5523_led_config lp5523_led_config[] = {
+        {
+                .chan_nr        = 0,
+                .led_current    = 50,
+		.max_current    = 130,
+        },
+...
+        }, {
+                .chan_nr        = 8,
+                .led_current    = 50,
+		.max_current    = 130,
+        }
+};
+
+static int lp5523_setup(void)
+{
+	/* Setup HW resources */
+}
+
+static void lp5523_release(void)
+{
+	/* Release HW resources */
+}
+
+static void lp5523_enable(bool state)
+{
+	/* Control chip enable signal */
+}
+
+static struct lp5523_platform_data lp5523_platform_data = {
+        .led_config     = lp5523_led_config,
+        .num_channels   = ARRAY_SIZE(lp5523_led_config),
+        .clock_mode     = LP5523_CLOCK_EXT,
+        .setup_resources   = lp5523_setup,
+        .release_resources = lp5523_release,
+        .enable            = lp5523_enable,
+};

From 25672b9dde18b86e736b8138bcffbaf7158d160a Mon Sep 17 00:00:00 2001
From: Davidlohr Bueso <dave@gnu.org>
Date: Thu, 11 Nov 2010 14:05:24 -0800
Subject: [PATCH 0533/1066] drivers/leds/leds-gpio.c: properly initialize
 return value

In the event that none of the configs are set (CONFIG_LEDS_GPIO_PLATFORM,
CONFIG_LEDS_GPIO_OF, CONFIG_LEDS_GPIO_PLATFORM), we will return a bogus
value when initializing the module.

Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/leds/leds-gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index ea57e05d08f3..4d9fa38d9ff6 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -316,7 +316,7 @@ static struct of_platform_driver of_gpio_leds_driver = {
 
 static int __init gpio_led_init(void)
 {
-	int ret;
+	int ret = 0;
 
 #ifdef CONFIG_LEDS_GPIO_PLATFORM	
 	ret = platform_driver_register(&gpio_led_driver);

From ed3a6787bfff125a7aee88e5be0e0661887dfd15 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 11 Nov 2010 14:05:25 -0800
Subject: [PATCH 0534/1066] drivers/video/backlight/s6e63m0.c: set permissions
 on gamma_table file to 0444

gamma_table is not writable, so set permissions to 0444.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/s6e63m0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/backlight/s6e63m0.c b/drivers/video/backlight/s6e63m0.c
index a3128c9cb7ad..2d8328691df4 100644
--- a/drivers/video/backlight/s6e63m0.c
+++ b/drivers/video/backlight/s6e63m0.c
@@ -729,7 +729,7 @@ static ssize_t s6e63m0_sysfs_show_gamma_table(struct device *dev,
 
 	return strlen(buf);
 }
-static DEVICE_ATTR(gamma_table, 0644,
+static DEVICE_ATTR(gamma_table, 0444,
 		s6e63m0_sysfs_show_gamma_table, NULL);
 
 static int __init s6e63m0_probe(struct spi_device *spi)

From 6bde9082c521b030f899ff5e5b553beba228c932 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Thu, 11 Nov 2010 14:05:25 -0800
Subject: [PATCH 0535/1066] backlight: fix blanking for LMS283GF05 LCD

The LCD was turned on if the variable power was > 0, but that was
incorrect.  The LCD has to be turned on in NORMAL and UNBLANK case.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/lms283gf05.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/backlight/lms283gf05.c b/drivers/video/backlight/lms283gf05.c
index abc43a0eb97d..5d3cf33953ac 100644
--- a/drivers/video/backlight/lms283gf05.c
+++ b/drivers/video/backlight/lms283gf05.c
@@ -129,7 +129,7 @@ static int lms283gf05_power_set(struct lcd_device *ld, int power)
 	struct spi_device *spi = st->spi;
 	struct lms283gf05_pdata *pdata = spi->dev.platform_data;
 
-	if (power) {
+	if (power <= FB_BLANK_NORMAL) {
 		if (pdata)
 			lms283gf05_reset(pdata->reset_gpio,
 					pdata->reset_inverted);

From 4dbdf8861a8ad83ef194f2c3a389a7b37c6f832e Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Thu, 11 Nov 2010 14:05:26 -0800
Subject: [PATCH 0536/1066] backlight: fix blanking for L4F00242T03 LCD

The LCD was turned on if the variable power was > 0, but that was
incorrect.  The LCD has to be turned on in NORMAL and UNBLANK case.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/l4f00242t03.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/backlight/l4f00242t03.c b/drivers/video/backlight/l4f00242t03.c
index 9093ef0fa869..c67801e57aaf 100644
--- a/drivers/video/backlight/l4f00242t03.c
+++ b/drivers/video/backlight/l4f00242t03.c
@@ -78,7 +78,7 @@ static int l4f00242t03_lcd_power_set(struct lcd_device *ld, int power)
 	const u16 slpin = 0x10;
 	const u16 disoff = 0x28;
 
-	if (power) {
+	if (power <= FB_BLANK_NORMAL) {
 		if (priv->lcd_on)
 			return 0;
 

From d974e00b955ee390e02ae2f0eeb5ed921599ec07 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 11 Nov 2010 14:05:26 -0800
Subject: [PATCH 0537/1066] drivers/video/backlight/s6e63m0.c: unregister
 backlight device and remove sysfs attribute file in s6e63m0_remove

s6e63m0_probe() registered backlight device and create sysfs attribute
files, thus s6e63m0_remove() should unregister backlight device and remove
sysfs attribute files.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Cc: InKi Dae <inki.dae@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/s6e63m0.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/video/backlight/s6e63m0.c b/drivers/video/backlight/s6e63m0.c
index 2d8328691df4..78bcdb176691 100644
--- a/drivers/video/backlight/s6e63m0.c
+++ b/drivers/video/backlight/s6e63m0.c
@@ -829,6 +829,9 @@ static int __devexit s6e63m0_remove(struct spi_device *spi)
 	struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
 
 	s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
+	device_remove_file(&spi->dev, &dev_attr_gamma_table);
+	device_remove_file(&spi->dev, &dev_attr_gamma_mode);
+	backlight_device_unregister(lcd->bd);
 	lcd_device_unregister(lcd->ld);
 	kfree(lcd);
 

From a1025e224c518dceb342d0cc54e5513c6476f60c Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 11 Nov 2010 14:05:27 -0800
Subject: [PATCH 0538/1066] drivers/video/backlight/s6e63m0.c: fix section
 mismatch

Eliminate section mismatch warning by marking s6e63m0_probe() as __devinit.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Cc: InKi Dae <inki.dae@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/s6e63m0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/backlight/s6e63m0.c b/drivers/video/backlight/s6e63m0.c
index 78bcdb176691..5927db0da999 100644
--- a/drivers/video/backlight/s6e63m0.c
+++ b/drivers/video/backlight/s6e63m0.c
@@ -732,7 +732,7 @@ static ssize_t s6e63m0_sysfs_show_gamma_table(struct device *dev,
 static DEVICE_ATTR(gamma_table, 0444,
 		s6e63m0_sysfs_show_gamma_table, NULL);
 
-static int __init s6e63m0_probe(struct spi_device *spi)
+static int __devinit s6e63m0_probe(struct spi_device *spi)
 {
 	int ret = 0;
 	struct s6e63m0 *lcd = NULL;

From fef7764f8bca9d603a8a51dcb522db97739a33c2 Mon Sep 17 00:00:00 2001
From: Arun Murthy <arun.murthy@stericsson.com>
Date: Thu, 11 Nov 2010 14:05:28 -0800
Subject: [PATCH 0539/1066] backlight: add low threshold to pwm backlight

The intensity of the backlight can be varied from a range of
max_brightness to zero.  Though most, if not all the pwm based backlight
devices start flickering at lower brightness value.  And also for each
device there exists a brightness value below which the backlight appears
to be turned off though the value is not equal to zero.

If the range of brightness for a device is from zero to max_brightness.  A
graph is plotted for brightness Vs intensity for the pwm based backlight
device has to be a linear graph.

intensity
	  |   /
	  |  /
	  | /
	  |/
	  ---------
	 0	max_brightness

But pratically on measuring the above we note that the intensity of
backlight goes to zero(OFF) when the value in not zero almost nearing to
zero(some x%).  so the graph looks like

intensity
	  |    /
	  |   /
	  |  /
	  |  |
	  ------------
	 0   x	 max_brightness

In order to overcome this drawback knowing this x% i.e nothing but the low
threshold beyond which the backlight is off and will have no effect, the
brightness value is being offset by the low threshold value(retaining the
linearity of the graph).  Now the graph becomes

intensity
	  |     /
	  |    /
	  |   /
	  |  /
	  -------------
	   0	  max_brightness

With this for each and every digit increment in the brightness from zero
there is a change in the intensity of backlight.  Devices having this
behaviour can set the low threshold brightness(lth_brightness) and pass
the same as platform data else can have it as zero.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/pwm_bl.c | 7 ++++++-
 include/linux/pwm_backlight.h    | 1 +
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 550443518891..21866ec69656 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -25,6 +25,7 @@ struct pwm_bl_data {
 	struct pwm_device	*pwm;
 	struct device		*dev;
 	unsigned int		period;
+	unsigned int		lth_brightness;
 	int			(*notify)(struct device *,
 					  int brightness);
 };
@@ -48,7 +49,9 @@ static int pwm_backlight_update_status(struct backlight_device *bl)
 		pwm_config(pb->pwm, 0, pb->period);
 		pwm_disable(pb->pwm);
 	} else {
-		pwm_config(pb->pwm, brightness * pb->period / max, pb->period);
+		brightness = pb->lth_brightness +
+			(brightness * (pb->period - pb->lth_brightness) / max);
+		pwm_config(pb->pwm, brightness, pb->period);
 		pwm_enable(pb->pwm);
 	}
 	return 0;
@@ -92,6 +95,8 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 
 	pb->period = data->pwm_period_ns;
 	pb->notify = data->notify;
+	pb->lth_brightness = data->lth_brightness *
+		(data->pwm_period_ns / data->max_brightness);
 	pb->dev = &pdev->dev;
 
 	pb->pwm = pwm_request(data->pwm_id, "backlight");
diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h
index 01b3d759f1fc..e031e1a486d9 100644
--- a/include/linux/pwm_backlight.h
+++ b/include/linux/pwm_backlight.h
@@ -8,6 +8,7 @@ struct platform_pwm_backlight_data {
 	int pwm_id;
 	unsigned int max_brightness;
 	unsigned int dft_brightness;
+	unsigned int lth_brightness;
 	unsigned int pwm_period_ns;
 	int (*init)(struct device *dev);
 	int (*notify)(struct device *dev, int brightness);

From c7ce2500e3140b728d8a98a1acb1c2690af51eae Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Thu, 11 Nov 2010 14:05:29 -0800
Subject: [PATCH 0540/1066] drivers/video/backlight/adp8860_bl.c: fix ambient
 light zone overwrite handling

This affects the get/set of the current Ambient Light Zone.  Reading
should return an integer between 1..3 (1 = Daylight, 2 = office, 3 =
dark).  Writing a value between 1..3 forces the backlight controller to
enter the corresponding Ambient Light Zone.  Writing 0 returns to normal
operation.

Fix valid range checking so we don't write invalid values to the
controller, and make sure we subtract 1, since this is what the register
definition (CFGR:BLV) requires.  Otherwise the values written don't work
correctly.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/adp8860_bl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c
index 3ec24609151e..a447c92acc51 100644
--- a/drivers/video/backlight/adp8860_bl.c
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -614,7 +614,7 @@ static ssize_t adp8860_bl_ambient_light_zone_store(struct device *dev,
 	if (val == 0) {
 		/* Enable automatic ambient light sensing */
 		adp8860_set_bits(data->client, ADP8860_MDCR, CMP_AUTOEN);
-	} else if ((val > 0) && (val < 6)) {
+	} else if ((val > 0) && (val <= 3)) {
 		/* Disable automatic ambient light sensing */
 		adp8860_clr_bits(data->client, ADP8860_MDCR, CMP_AUTOEN);
 
@@ -622,7 +622,7 @@ static ssize_t adp8860_bl_ambient_light_zone_store(struct device *dev,
 		mutex_lock(&data->lock);
 		adp8860_read(data->client, ADP8860_CFGR, &reg_val);
 		reg_val &= ~(CFGR_BLV_MASK << CFGR_BLV_SHIFT);
-		reg_val |= val << CFGR_BLV_SHIFT;
+		reg_val |= (val - 1) << CFGR_BLV_SHIFT;
 		adp8860_write(data->client, ADP8860_CFGR, reg_val);
 		mutex_unlock(&data->lock);
 	}

From 4f1aa846316d789ae2df6d22d6bca6e4a373e23d Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Thu, 11 Nov 2010 14:05:29 -0800
Subject: [PATCH 0541/1066] drivers/video/backlight/adp8860_bl.c: check
 strict_strtoul() return value

Handle return value, strict_strtoul is declared with attribute
warn_unused_result.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/adp8860_bl.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c
index a447c92acc51..734c650a47c4 100644
--- a/drivers/video/backlight/adp8860_bl.c
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -502,8 +502,10 @@ static ssize_t adp8860_bl_l1_daylight_max_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct adp8860_bl *data = dev_get_drvdata(dev);
+	int ret = strict_strtoul(buf, 10, &data->cached_daylight_max);
+	if (ret)
+		return ret;
 
-	strict_strtoul(buf, 10, &data->cached_daylight_max);
 	return adp8860_store(dev, buf, count, ADP8860_BLMX1);
 }
 static DEVICE_ATTR(l1_daylight_max, 0664, adp8860_bl_l1_daylight_max_show,

From bd760e1e5b34351e0705705e5163cb89c1316d71 Mon Sep 17 00:00:00 2001
From: "Edgar (gimli) Hucek" <gimli@dark-green.com>
Date: Thu, 11 Nov 2010 14:05:30 -0800
Subject: [PATCH 0542/1066] backlight: MacBookAir3,1(3,2) mbp-nvidia-bl support

Add support for the MacBookAir3,1 and MacBookAir3,2 to the mbp-nvidia-bl
driver.

Signed-off-by: Edgar (gimli) Hucek <gimli@dark-green.com>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/mbp_nvidia_bl.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/video/backlight/mbp_nvidia_bl.c b/drivers/video/backlight/mbp_nvidia_bl.c
index 9fb533f6373e..1485f7345f49 100644
--- a/drivers/video/backlight/mbp_nvidia_bl.c
+++ b/drivers/video/backlight/mbp_nvidia_bl.c
@@ -335,6 +335,24 @@ static const struct dmi_system_id __initdata mbp_device_table[] = {
 		},
 		.driver_data	= (void *)&nvidia_chipset_data,
 	},
+	{
+		.callback	= mbp_dmi_match,
+		.ident		= "MacBookAir 3,1",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir3,1"),
+		},
+		.driver_data	= (void *)&nvidia_chipset_data,
+	},
+	{
+		.callback	= mbp_dmi_match,
+		.ident		= "MacBookAir 3,2",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir3,2"),
+		},
+		.driver_data	= (void *)&nvidia_chipset_data,
+	},
 	{ }
 };
 

From e2b348354112df63a9c2ea4219a6867c6c7ea100 Mon Sep 17 00:00:00 2001
From: Steffen Klassert <steffen.klassert@secunet.com>
Date: Wed, 10 Nov 2010 12:21:43 +0100
Subject: [PATCH 0543/1066] crypto: pcrypt - Fix use after free on padata_free

kobject_put is called from padata_free for the padata kobject.
The kobject's release function frees the padata instance,
so don't call kobject_put for the padata kobject from pcrypt.

Reported-and-tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 crypto/pcrypt.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/crypto/pcrypt.c b/crypto/pcrypt.c
index de3078215fe6..75586f1f86e7 100644
--- a/crypto/pcrypt.c
+++ b/crypto/pcrypt.c
@@ -504,7 +504,6 @@ err:
 
 static void pcrypt_fini_padata(struct padata_pcrypt *pcrypt)
 {
-	kobject_put(&pcrypt->pinst->kobj);
 	free_cpumask_var(pcrypt->cb_cpumask->mask);
 	kfree(pcrypt->cb_cpumask);
 

From 82e3e767c21fef2b1b38868e20eb4e470a1e38e3 Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bjorn.helgaas@hp.com>
Date: Wed, 10 Nov 2010 10:26:07 -0700
Subject: [PATCH 0544/1066] PCI: fix pci_bus_alloc_resource() hang, prefer
 positive decode

When a PCI bus has two resources with the same start/end, e.g.,

    pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd7ffffff pref]
    pci_bus 0000:04: resource 7 [mem 0xd0000000-0xd7ffffff]

the previous pci_bus_find_resource_prev() implementation would alternate
between them forever:

    pci_bus_find_resource_prev(... [mem 0xd0000000-0xd7ffffff pref])
        returns [mem 0xd0000000-0xd7ffffff]
    pci_bus_find_resource_prev(... [mem 0xd0000000-0xd7ffffff])
        returns [mem 0xd0000000-0xd7ffffff pref]
    pci_bus_find_resource_prev(... [mem 0xd0000000-0xd7ffffff pref])
        returns [mem 0xd0000000-0xd7ffffff]
    ...

This happened because there was no ordering between two resources with the
same start and end.  A resource that had the same start and end as the
cursor, but was not itself the cursor, was considered to be before the
cursor.

This patch fixes the hang by making a fixed ordering between any two
resources.

In addition, it tries to allocate from positively decoded regions before
using any subtractively decoded resources.  This means we will use a
positive decode region before a subtractive decode one, even if it means
using a smaller address.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=22062
Reported-by: Borislav Petkov <bp@amd64.org>
Tested-by: Borislav Petkov <bp@amd64.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/bus.c | 70 +++++++++++++++++++++++++++++++++--------------
 1 file changed, 49 insertions(+), 21 deletions(-)

diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 5624db8c9ad0..003170ea2e39 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -64,17 +64,57 @@ void pci_bus_remove_resources(struct pci_bus *bus)
 	}
 }
 
+static bool pci_bus_resource_better(struct resource *res1, bool pos1,
+				    struct resource *res2, bool pos2)
+{
+	/* If exactly one is positive decode, always prefer that one */
+	if (pos1 != pos2)
+		return pos1 ? true : false;
+
+	/* Prefer the one that contains the highest address */
+	if (res1->end != res2->end)
+		return (res1->end > res2->end) ? true : false;
+
+	/* Otherwise, prefer the one with highest "center of gravity" */
+	if (res1->start != res2->start)
+		return (res1->start > res2->start) ? true : false;
+
+	/* Otherwise, choose one arbitrarily (but consistently) */
+	return (res1 > res2) ? true : false;
+}
+
+static bool pci_bus_resource_positive(struct pci_bus *bus, struct resource *res)
+{
+	struct pci_bus_resource *bus_res;
+
+	/*
+	 * This relies on the fact that pci_bus.resource[] refers to P2P or
+	 * CardBus bridge base/limit registers, which are always positively
+	 * decoded.  The pci_bus.resources list contains host bridge or
+	 * subtractively decoded resources.
+	 */
+	list_for_each_entry(bus_res, &bus->resources, list) {
+		if (bus_res->res == res)
+			return (bus_res->flags & PCI_SUBTRACTIVE_DECODE) ?
+				false : true;
+	}
+	return true;
+}
+
 /*
- * Find the highest-address bus resource below the cursor "res".  If the
- * cursor is NULL, return the highest resource.
+ * Find the next-best bus resource after the cursor "res".  If the cursor is
+ * NULL, return the best resource.  "Best" means that we prefer positive
+ * decode regions over subtractive decode, then those at higher addresses.
  */
 static struct resource *pci_bus_find_resource_prev(struct pci_bus *bus,
 						   unsigned int type,
 						   struct resource *res)
 {
+	bool res_pos, r_pos, prev_pos = false;
 	struct resource *r, *prev = NULL;
 	int i;
 
+	res_pos = pci_bus_resource_positive(bus, res);
 	pci_bus_for_each_resource(bus, r, i) {
 		if (!r)
 			continue;
@@ -82,26 +122,14 @@ static struct resource *pci_bus_find_resource_prev(struct pci_bus *bus,
 		if ((r->flags & IORESOURCE_TYPE_BITS) != type)
 			continue;
 
-		/* If this resource is at or past the cursor, skip it */
-		if (res) {
-			if (r == res)
-				continue;
-			if (r->end > res->end)
-				continue;
-			if (r->end == res->end && r->start > res->start)
-				continue;
+		r_pos = pci_bus_resource_positive(bus, r);
+		if (!res || pci_bus_resource_better(res, res_pos, r, r_pos)) {
+			if (!prev || pci_bus_resource_better(r, r_pos,
+							     prev, prev_pos)) {
+				prev = r;
+				prev_pos = r_pos;
+			}
 		}
-
-		if (!prev)
-			prev = r;
-
-		/*
-		 * A small resource is higher than a large one that ends at
-		 * the same address.
-		 */
-		if (r->end > prev->end ||
-		    (r->end == prev->end && r->start > prev->start))
-			prev = r;
 	}
 
 	return prev;

From 369cf77a6a3e41b1110506ddf43d45804103bfde Mon Sep 17 00:00:00 2001
From: Thomas Graf <tgraf@infradead.org>
Date: Thu, 11 Nov 2010 15:47:59 +0000
Subject: [PATCH 0545/1066] rtnetlink: Fix message size calculation for link
 messages

nlmsg_total_size() calculates the length of a netlink message
including header and alignment. nla_total_size() calculates the
space an individual attribute consumes which was meant to be used
in this context.

Also, ensure to account for the attribute header for the
IFLA_INFO_XSTATS attribute as implementations of get_xstats_size()
seem to assume that we do so.

The addition of two message headers minus the missing attribute
header resulted in a calculated message size that was larger than
required. Therefore we never risked running out of skb tailroom.

Signed-off-by: Thomas Graf <tgraf@infradead.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/rtnetlink.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 8121268ddbdd..841c287ef40a 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -347,16 +347,17 @@ static size_t rtnl_link_get_size(const struct net_device *dev)
 	if (!ops)
 		return 0;
 
-	size = nlmsg_total_size(sizeof(struct nlattr)) + /* IFLA_LINKINFO */
-	       nlmsg_total_size(strlen(ops->kind) + 1);	 /* IFLA_INFO_KIND */
+	size = nla_total_size(sizeof(struct nlattr)) + /* IFLA_LINKINFO */
+	       nla_total_size(strlen(ops->kind) + 1);  /* IFLA_INFO_KIND */
 
 	if (ops->get_size)
 		/* IFLA_INFO_DATA + nested data */
-		size += nlmsg_total_size(sizeof(struct nlattr)) +
+		size += nla_total_size(sizeof(struct nlattr)) +
 			ops->get_size(dev);
 
 	if (ops->get_xstats_size)
-		size += ops->get_xstats_size(dev);	/* IFLA_INFO_XSTATS */
+		/* IFLA_INFO_XSTATS */
+		size += nla_total_size(ops->get_xstats_size(dev));
 
 	return size;
 }

From 1f18b7176e2e41fada24584ce3c80e9abfaca52b Mon Sep 17 00:00:00 2001
From: Mariusz Kozlowski <mk@lab.zgora.pl>
Date: Mon, 8 Nov 2010 11:58:45 +0000
Subject: [PATCH 0546/1066] net: Fix header size check for GSO case in recvmsg
 (af_packet)

Parameter 'len' is size_t type so it will never get negative.

Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/packet/af_packet.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 0856a13cb53d..8298e676f5a0 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1610,9 +1610,11 @@ static int packet_recvmsg(struct kiocb *iocb, struct socket *sock,
 
 		err = -EINVAL;
 		vnet_hdr_len = sizeof(vnet_hdr);
-		if ((len -= vnet_hdr_len) < 0)
+		if (len < vnet_hdr_len)
 			goto out_free;
 
+		len -= vnet_hdr_len;
+
 		if (skb_is_gso(skb)) {
 			struct skb_shared_info *sinfo = skb_shinfo(skb);
 

From 2040bd57b5f0c52dc4503e0e960b1dcafaf30a8b Mon Sep 17 00:00:00 2001
From: Joakim Tjernlund <joakim.tjernlund@transmode.se>
Date: Fri, 12 Nov 2010 03:55:08 +0000
Subject: [PATCH 0547/1066] ucc_geth: Do not bring the whole IF down when TX
 failure.

ucc_geth_close lacks a cancel_work_sync(&ugeth->timeout_work)
to stop any outstanding processing of TX fail. However, one
can not call cancel_work_sync without fixing the timeout function
otherwise it will deadlock. This patch brings ucc_geth in line with
gianfar:

Don't bring the interface down and up, just reinit controller HW
and PHY.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ucc_geth.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index a4c3f5708246..cf6653f71d23 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -2065,9 +2065,6 @@ static void ucc_geth_stop(struct ucc_geth_private *ugeth)
 	/* Disable Rx and Tx */
 	clrbits32(&ug_regs->maccfg1, MACCFG1_ENABLE_RX | MACCFG1_ENABLE_TX);
 
-	phy_disconnect(ugeth->phydev);
-	ugeth->phydev = NULL;
-
 	ucc_geth_memclean(ugeth);
 }
 
@@ -3550,7 +3547,10 @@ static int ucc_geth_close(struct net_device *dev)
 
 	napi_disable(&ugeth->napi);
 
+	cancel_work_sync(&ugeth->timeout_work);
 	ucc_geth_stop(ugeth);
+	phy_disconnect(ugeth->phydev);
+	ugeth->phydev = NULL;
 
 	free_irq(ugeth->ug_info->uf_info.irq, ugeth->ndev);
 
@@ -3579,8 +3579,12 @@ static void ucc_geth_timeout_work(struct work_struct *work)
 		 * Must reset MAC *and* PHY. This is done by reopening
 		 * the device.
 		 */
-		ucc_geth_close(dev);
-		ucc_geth_open(dev);
+		netif_tx_stop_all_queues(dev);
+		ucc_geth_stop(ugeth);
+		ucc_geth_init_mac(ugeth);
+		/* Must start PHY here */
+		phy_start(ugeth->phydev);
+		netif_tx_start_all_queues(dev);
 	}
 
 	netif_tx_schedule_all(dev);
@@ -3594,7 +3598,6 @@ static void ucc_geth_timeout(struct net_device *dev)
 {
 	struct ucc_geth_private *ugeth = netdev_priv(dev);
 
-	netif_carrier_off(dev);
 	schedule_work(&ugeth->timeout_work);
 }
 

From 75e6047431872dadd0b13503b374e48ccd71a507 Mon Sep 17 00:00:00 2001
From: Joakim Tjernlund <joakim.tjernlund@transmode.se>
Date: Fri, 12 Nov 2010 03:55:09 +0000
Subject: [PATCH 0548/1066] ucc_geth: Fix deadlock

This script:
 while [ 1==1 ] ; do ifconfig eth0 up; usleep 1950000 ;ifconfig eth0 down; dmesg -c ;done
causes in just a second or two:
INFO: task ifconfig:572 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ifconfig      D 0ff65760     0   572    369 0x00000000
Call Trace:
[c6157be0] [c6008460] 0xc6008460 (unreliable)
[c6157ca0] [c0008608] __switch_to+0x4c/0x6c
[c6157cb0] [c028fecc] schedule+0x184/0x310
[c6157ce0] [c0290e54] __mutex_lock_slowpath+0xa4/0x150
[c6157d20] [c0290c48] mutex_lock+0x44/0x48
[c6157d30] [c01aba74] phy_stop+0x20/0x70
[c6157d40] [c01aef40] ucc_geth_stop+0x30/0x98
[c6157d60] [c01b18fc] ucc_geth_close+0x9c/0xdc
[c6157d80] [c01db0cc] __dev_close+0xa0/0xd0
[c6157d90] [c01deddc] __dev_change_flags+0x8c/0x148
[c6157db0] [c01def54] dev_change_flags+0x1c/0x64
[c6157dd0] [c0237ac8] devinet_ioctl+0x678/0x784
[c6157e50] [c0239a58] inet_ioctl+0xb0/0xbc
[c6157e60] [c01cafa8] sock_ioctl+0x174/0x2a0
[c6157e80] [c009a16c] vfs_ioctl+0xcc/0xe0
[c6157ea0] [c009a998] do_vfs_ioctl+0xc4/0x79c
[c6157f10] [c009b0b0] sys_ioctl+0x40/0x74
[c6157f40] [c00117c4] ret_from_syscall+0x0/0x38

The reason appears to be ucc_geth_stop meets adjust_link as the
PHY reports PHY changes. I belive adjust_link hangs somewhere,
holding the PHY lock, because ucc_geth_stop disabled the
controller HW.
Fix is to stop the PHY before disabling the controller.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ucc_geth.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index cf6653f71d23..acbdab3d66ca 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -2050,12 +2050,16 @@ static void ucc_geth_stop(struct ucc_geth_private *ugeth)
 
 	ugeth_vdbg("%s: IN", __func__);
 
+	/*
+	 * Tell the kernel the link is down.
+	 * Must be done before disabling the controller
+	 * or deadlock may happen.
+	 */
+	phy_stop(phydev);
+
 	/* Disable the controller */
 	ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
 
-	/* Tell the kernel the link is down */
-	phy_stop(phydev);
-
 	/* Mask all interrupts */
 	out_be32(ugeth->uccf->p_uccm, 0x00000000);
 

From 167c25e4c5501f8b7e37f949d23652975c5a769c Mon Sep 17 00:00:00 2001
From: Jason Wang <jasowang@redhat.com>
Date: Wed, 10 Nov 2010 14:45:41 +0000
Subject: [PATCH 0549/1066] virtio-net: init link state correctly

For device that supports VIRTIO_NET_F_STATUS, there's no need to
assume the link is up and we need to call nerif_carrier_off() before
querying device status, otherwise we may get wrong operstate after
diver was loaded because the link watch event was not fired as
expected.

For device that does not support VIRITO_NET_F_STATUS, we could not get
its status through virtnet_update_status() and what we can only do is
always assuming the link is up.

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/virtio_net.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index bb6b67f6b0cc..b6d402806ae6 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -986,9 +986,15 @@ static int virtnet_probe(struct virtio_device *vdev)
 		goto unregister;
 	}
 
-	vi->status = VIRTIO_NET_S_LINK_UP;
-	virtnet_update_status(vi);
-	netif_carrier_on(dev);
+	/* Assume link up if device can't report link status,
+	   otherwise get link status from config. */
+	if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
+		netif_carrier_off(dev);
+		virtnet_update_status(vi);
+	} else {
+		vi->status = VIRTIO_NET_S_LINK_UP;
+		netif_carrier_on(dev);
+	}
 
 	pr_debug("virtnet: registered device %s\n", dev->name);
 	return 0;

From 0a85df004667c99efc31fab07386823eefce3be5 Mon Sep 17 00:00:00 2001
From: Hao Zheng <hzheng@nicira.com>
Date: Thu, 11 Nov 2010 13:47:57 +0000
Subject: [PATCH 0550/1066] vlan: Add function to retrieve EtherType from vlan
 packets.

Depending on how a packet is vlan tagged (i.e. hardware accelerated or
not), the encapsulated protocol is stored in different locations.  This
provides a consistent method of accessing that protocol, which is needed
by drivers, security checks, etc.

Signed-off-by: Hao Zheng <hzheng@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/if_vlan.h | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index c2f3a72712ce..635e1faec412 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -339,6 +339,31 @@ static inline int vlan_get_tag(const struct sk_buff *skb, u16 *vlan_tci)
 	}
 }
 
+/**
+ * vlan_get_protocol - get protocol EtherType.
+ * @skb: skbuff to query
+ *
+ * Returns the EtherType of the packet, regardless of whether it is
+ * vlan encapsulated (normal or hardware accelerated) or not.
+ */
+static inline __be16 vlan_get_protocol(const struct sk_buff *skb)
+{
+	__be16 protocol = 0;
+
+	if (vlan_tx_tag_present(skb) ||
+	     skb->protocol != cpu_to_be16(ETH_P_8021Q))
+		protocol = skb->protocol;
+	else {
+		__be16 proto, *protop;
+		protop = skb_header_pointer(skb, offsetof(struct vlan_ethhdr,
+						h_vlan_encapsulated_proto),
+						sizeof(proto), &proto);
+		if (likely(protop))
+			protocol = *protop;
+	}
+
+	return protocol;
+}
 #endif /* __KERNEL__ */
 
 /* VLAN IOCTLs are found in sockios.h */

From d0d9d8ef5949551276f635cb04969184ba1a9553 Mon Sep 17 00:00:00 2001
From: Hao Zheng <hzheng@nicira.com>
Date: Thu, 11 Nov 2010 13:47:58 +0000
Subject: [PATCH 0551/1066] bnx2x: Look inside vlan when determining checksum
 proto.

Currently the skb->protocol field is used to setup checksum
offloading on transmit for the correct protocol.  However, if
vlan offloading is disabled or otherwise not used, the protocol
field will be ETH_P_8021Q, not the actual protocol.  This will
cause the checksum to be not computed correctly, even though the
hardware is capable of looking inside vlan tags.  Instead,
look inside the header if necessary to determine the correct
protocol type.

To some extent this fixes a regression from 2.6.36 because it
was previously not possible to disable vlan offloading and this
error case was not exposed.

Signed-off-by: Hao Zheng <hzheng@nicira.com>
CC: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x/bnx2x_cmn.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c
index 459614d2d7bc..94d5f59d5a6f 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/bnx2x/bnx2x_cmn.c
@@ -1680,7 +1680,7 @@ static inline u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb)
 		rc = XMIT_PLAIN;
 
 	else {
-		if (skb->protocol == htons(ETH_P_IPV6)) {
+		if (vlan_get_protocol(skb) == htons(ETH_P_IPV6)) {
 			rc = XMIT_CSUM_V6;
 			if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
 				rc |= XMIT_CSUM_TCP;

From 5e09a10521681fe7808b1c4911a6d9c7fee55f82 Mon Sep 17 00:00:00 2001
From: Hao Zheng <hzheng@nicira.com>
Date: Thu, 11 Nov 2010 13:47:59 +0000
Subject: [PATCH 0552/1066] ixgbe: Look inside vlan when determining offload
 protocol.

Currently the skb->protocol field is used to setup various
offloading parameters on transmit for the correct protocol.
However, if vlan offloading is disabled or otherwise not used,
the protocol field will be ETH_P_8021Q, not the actual protocol.
This will cause the offloading to be not performed correctly,
even though the hardware is capable of looking inside vlan tags.
Instead, look inside the header if necessary to determine the
correct protocol type.

To some extent this fixes a regression from 2.6.36 because it
was previously not possible to disable vlan offloading and this
error case was not exposed.

Signed-off-by: Hao Zheng <hzheng@nicira.com>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Alex Duyck <alexander.h.duyck@intel.com>
CC: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_main.c | 60 ++++++++++++++++++----------------
 1 file changed, 32 insertions(+), 28 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 2bd3eb4ee5a1..fbad4d819608 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -764,8 +764,9 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
 #ifdef IXGBE_FCOE
 				/* adjust for FCoE Sequence Offload */
 				if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
-				    && (skb->protocol == htons(ETH_P_FCOE)) &&
-				    skb_is_gso(skb)) {
+				    && skb_is_gso(skb)
+				    && vlan_get_protocol(skb) ==
+				    htons(ETH_P_FCOE)) {
 					hlen = skb_transport_offset(skb) +
 						sizeof(struct fc_frame_header) +
 						sizeof(struct fcoe_crc_eof);
@@ -5823,7 +5824,7 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 
 static int ixgbe_tso(struct ixgbe_adapter *adapter,
 		     struct ixgbe_ring *tx_ring, struct sk_buff *skb,
-		     u32 tx_flags, u8 *hdr_len)
+		     u32 tx_flags, u8 *hdr_len, __be16 protocol)
 {
 	struct ixgbe_adv_tx_context_desc *context_desc;
 	unsigned int i;
@@ -5841,7 +5842,7 @@ static int ixgbe_tso(struct ixgbe_adapter *adapter,
 		l4len = tcp_hdrlen(skb);
 		*hdr_len += l4len;
 
-		if (skb->protocol == htons(ETH_P_IP)) {
+		if (protocol == htons(ETH_P_IP)) {
 			struct iphdr *iph = ip_hdr(skb);
 			iph->tot_len = 0;
 			iph->check = 0;
@@ -5880,7 +5881,7 @@ static int ixgbe_tso(struct ixgbe_adapter *adapter,
 		type_tucmd_mlhl = (IXGBE_TXD_CMD_DEXT |
 				   IXGBE_ADVTXD_DTYP_CTXT);
 
-		if (skb->protocol == htons(ETH_P_IP))
+		if (protocol == htons(ETH_P_IP))
 			type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
 		type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
 		context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl);
@@ -5906,16 +5907,10 @@ static int ixgbe_tso(struct ixgbe_adapter *adapter,
 	return false;
 }
 
-static u32 ixgbe_psum(struct ixgbe_adapter *adapter, struct sk_buff *skb)
+static u32 ixgbe_psum(struct ixgbe_adapter *adapter, struct sk_buff *skb,
+		      __be16 protocol)
 {
 	u32 rtn = 0;
-	__be16 protocol;
-
-	if (skb->protocol == cpu_to_be16(ETH_P_8021Q))
-		protocol = ((const struct vlan_ethhdr *)skb->data)->
-					h_vlan_encapsulated_proto;
-	else
-		protocol = skb->protocol;
 
 	switch (protocol) {
 	case cpu_to_be16(ETH_P_IP):
@@ -5943,7 +5938,7 @@ static u32 ixgbe_psum(struct ixgbe_adapter *adapter, struct sk_buff *skb)
 	default:
 		if (unlikely(net_ratelimit()))
 			e_warn(probe, "partial checksum but proto=%x!\n",
-			       skb->protocol);
+			       protocol);
 		break;
 	}
 
@@ -5952,7 +5947,8 @@ static u32 ixgbe_psum(struct ixgbe_adapter *adapter, struct sk_buff *skb)
 
 static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
 			  struct ixgbe_ring *tx_ring,
-			  struct sk_buff *skb, u32 tx_flags)
+			  struct sk_buff *skb, u32 tx_flags,
+			  __be16 protocol)
 {
 	struct ixgbe_adv_tx_context_desc *context_desc;
 	unsigned int i;
@@ -5981,7 +5977,7 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
 				    IXGBE_ADVTXD_DTYP_CTXT);
 
 		if (skb->ip_summed == CHECKSUM_PARTIAL)
-			type_tucmd_mlhl |= ixgbe_psum(adapter, skb);
+			type_tucmd_mlhl |= ixgbe_psum(adapter, skb, protocol);
 
 		context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl);
 		/* use index zero for tx checksum offload */
@@ -6179,7 +6175,7 @@ static void ixgbe_tx_queue(struct ixgbe_adapter *adapter,
 }
 
 static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
-		      int queue, u32 tx_flags)
+		      int queue, u32 tx_flags, __be16 protocol)
 {
 	struct ixgbe_atr_input atr_input;
 	struct tcphdr *th;
@@ -6190,7 +6186,7 @@ static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
 	u8 l4type = 0;
 
 	/* Right now, we support IPv4 only */
-	if (skb->protocol != htons(ETH_P_IP))
+	if (protocol != htons(ETH_P_IP))
 		return;
 	/* check if we're UDP or TCP */
 	if (iph->protocol == IPPROTO_TCP) {
@@ -6257,10 +6253,13 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
 	int txq = smp_processor_id();
-
 #ifdef IXGBE_FCOE
-	if ((skb->protocol == htons(ETH_P_FCOE)) ||
-	    (skb->protocol == htons(ETH_P_FIP))) {
+	__be16 protocol;
+
+	protocol = vlan_get_protocol(skb);
+
+	if ((protocol == htons(ETH_P_FCOE)) ||
+	    (protocol == htons(ETH_P_FIP))) {
 		if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
 			txq &= (adapter->ring_feature[RING_F_FCOE].indices - 1);
 			txq += adapter->ring_feature[RING_F_FCOE].mask;
@@ -6303,6 +6302,9 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct net_device *netdev
 	int tso;
 	int count = 0;
 	unsigned int f;
+	__be16 protocol;
+
+	protocol = vlan_get_protocol(skb);
 
 	if (vlan_tx_tag_present(skb)) {
 		tx_flags |= vlan_tx_tag_get(skb);
@@ -6323,8 +6325,8 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct net_device *netdev
 	/* for FCoE with DCB, we force the priority to what
 	 * was specified by the switch */
 	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED &&
-	    (skb->protocol == htons(ETH_P_FCOE) ||
-	     skb->protocol == htons(ETH_P_FIP))) {
+	    (protocol == htons(ETH_P_FCOE) ||
+	     protocol == htons(ETH_P_FIP))) {
 #ifdef CONFIG_IXGBE_DCB
 		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
 			tx_flags &= ~(IXGBE_TX_FLAGS_VLAN_PRIO_MASK
@@ -6334,7 +6336,7 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct net_device *netdev
 		}
 #endif
 		/* flag for FCoE offloads */
-		if (skb->protocol == htons(ETH_P_FCOE))
+		if (protocol == htons(ETH_P_FCOE))
 			tx_flags |= IXGBE_TX_FLAGS_FCOE;
 	}
 #endif
@@ -6368,9 +6370,10 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct net_device *netdev
 			tx_flags |= IXGBE_TX_FLAGS_FSO;
 #endif /* IXGBE_FCOE */
 	} else {
-		if (skb->protocol == htons(ETH_P_IP))
+		if (protocol == htons(ETH_P_IP))
 			tx_flags |= IXGBE_TX_FLAGS_IPV4;
-		tso = ixgbe_tso(adapter, tx_ring, skb, tx_flags, &hdr_len);
+		tso = ixgbe_tso(adapter, tx_ring, skb, tx_flags, &hdr_len,
+				protocol);
 		if (tso < 0) {
 			dev_kfree_skb_any(skb);
 			return NETDEV_TX_OK;
@@ -6378,7 +6381,8 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct net_device *netdev
 
 		if (tso)
 			tx_flags |= IXGBE_TX_FLAGS_TSO;
-		else if (ixgbe_tx_csum(adapter, tx_ring, skb, tx_flags) &&
+		else if (ixgbe_tx_csum(adapter, tx_ring, skb, tx_flags,
+				       protocol) &&
 			 (skb->ip_summed == CHECKSUM_PARTIAL))
 			tx_flags |= IXGBE_TX_FLAGS_CSUM;
 	}
@@ -6392,7 +6396,7 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct net_device *netdev
 			     test_bit(__IXGBE_FDIR_INIT_DONE,
 				      &tx_ring->reinit_state)) {
 				ixgbe_atr(adapter, skb, tx_ring->queue_index,
-					  tx_flags);
+					  tx_flags, protocol);
 				tx_ring->atr_count = 0;
 			}
 		}

From 53c7886c189597ff3af3413ed4e87632853b6d51 Mon Sep 17 00:00:00 2001
From: Casey Leedom <leedom@chelsio.com>
Date: Thu, 11 Nov 2010 09:06:48 +0000
Subject: [PATCH 0553/1066] cxgb4vf: don't implement trivial (and incorrect)
 ndo_select_queue()

Don't implement (struct net_device_ops *)->ndo_select_queue() with simple
call to skb_tx_hash().  This leads to non-persistent TX queue selection in
the Linux dev_pick_tx() routine for TCP connections.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb4vf/cxgb4vf_main.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
index 6de5e2e448a5..24808ac9976e 100644
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/cxgb4vf/cxgb4vf_main.c
@@ -1103,18 +1103,6 @@ static int cxgb4vf_set_mac_addr(struct net_device *dev, void *_addr)
 	return 0;
 }
 
-/*
- * Return a TX Queue on which to send the specified skb.
- */
-static u16 cxgb4vf_select_queue(struct net_device *dev, struct sk_buff *skb)
-{
-	/*
-	 * XXX For now just use the default hash but we probably want to
-	 * XXX look at other possibilities ...
-	 */
-	return skb_tx_hash(dev, skb);
-}
-
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /*
  * Poll all of our receive queues.  This is called outside of normal interrupt
@@ -2417,7 +2405,6 @@ static const struct net_device_ops cxgb4vf_netdev_ops	= {
 	.ndo_get_stats		= cxgb4vf_get_stats,
 	.ndo_set_rx_mode	= cxgb4vf_set_rxmode,
 	.ndo_set_mac_address	= cxgb4vf_set_mac_addr,
-	.ndo_select_queue	= cxgb4vf_select_queue,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= cxgb4vf_do_ioctl,
 	.ndo_change_mtu		= cxgb4vf_change_mtu,
@@ -2624,7 +2611,6 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
 		netdev->do_ioctl = cxgb4vf_do_ioctl;
 		netdev->change_mtu = cxgb4vf_change_mtu;
 		netdev->set_mac_address = cxgb4vf_set_mac_addr;
-		netdev->select_queue = cxgb4vf_select_queue;
 #ifdef CONFIG_NET_POLL_CONTROLLER
 		netdev->poll_controller = cxgb4vf_poll_controller;
 #endif

From b94e72e23e3ededa23cf18973ffc9a03c7ea8d04 Mon Sep 17 00:00:00 2001
From: Casey Leedom <leedom@chelsio.com>
Date: Thu, 11 Nov 2010 09:06:49 +0000
Subject: [PATCH 0554/1066] cxgb4vf: fix bug in Generic Receive Offload

Fix botch in Generic Receive Offload (the Packet Gather List Total length
field wasn't being initialized).

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb4vf/sge.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/cxgb4vf/sge.c b/drivers/net/cxgb4vf/sge.c
index f10864ddafbe..6a6e18b07248 100644
--- a/drivers/net/cxgb4vf/sge.c
+++ b/drivers/net/cxgb4vf/sge.c
@@ -1679,6 +1679,7 @@ int process_responses(struct sge_rspq *rspq, int budget)
 				}
 				len = RSPD_LEN(len);
 			}
+			gl.tot_len = len;
 
 			/*
 			 * Gather packet fragments.

From eb6c503db3619c43b5aad0ced82e9d91c034ced5 Mon Sep 17 00:00:00 2001
From: Casey Leedom <leedom@chelsio.com>
Date: Thu, 11 Nov 2010 09:06:50 +0000
Subject: [PATCH 0555/1066] cxgb4vf: fix some errors in Gather List to skb
 conversion

There were some errors in the way that internal Gather Lists were being
translated into skb's.  This also makes the VF Driver look more like the PF
Driver to facilitate easier comarison.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb4vf/sge.c | 121 +++++++++++++++++++++++---------------
 1 file changed, 74 insertions(+), 47 deletions(-)

diff --git a/drivers/net/cxgb4vf/sge.c b/drivers/net/cxgb4vf/sge.c
index 6a6e18b07248..ecf0770bf0ff 100644
--- a/drivers/net/cxgb4vf/sge.c
+++ b/drivers/net/cxgb4vf/sge.c
@@ -154,13 +154,14 @@ enum {
 	 */
 	RX_COPY_THRES = 256,
 	RX_PULL_LEN = 128,
-};
 
-/*
- * Can't define this in the above enum because PKTSHIFT isn't a constant in
- * the VF Driver ...
- */
-#define RX_PKT_PULL_LEN (RX_PULL_LEN + PKTSHIFT)
+	/*
+	 * Main body length for sk_buffs used for RX Ethernet packets with
+	 * fragments.  Should be >= RX_PULL_LEN but possibly bigger to give
+	 * pskb_may_pull() some room.
+	 */
+	RX_SKB_LEN = 512,
+};
 
 /*
  * Software state per TX descriptor.
@@ -1354,6 +1355,67 @@ out_free:
 	return NETDEV_TX_OK;
 }
 
+/**
+ *	t4vf_pktgl_to_skb - build an sk_buff from a packet gather list
+ *	@gl: the gather list
+ *	@skb_len: size of sk_buff main body if it carries fragments
+ *	@pull_len: amount of data to move to the sk_buff's main body
+ *
+ *	Builds an sk_buff from the given packet gather list.  Returns the
+ *	sk_buff or %NULL if sk_buff allocation failed.
+ */
+struct sk_buff *t4vf_pktgl_to_skb(const struct pkt_gl *gl,
+				  unsigned int skb_len, unsigned int pull_len)
+{
+	struct sk_buff *skb;
+	struct skb_shared_info *ssi;
+
+	/*
+	 * If the ingress packet is small enough, allocate an skb large enough
+	 * for all of the data and copy it inline.  Otherwise, allocate an skb
+	 * with enough room to pull in the header and reference the rest of
+	 * the data via the skb fragment list.
+	 *
+	 * Below we rely on RX_COPY_THRES being less than the smallest Rx
+	 * buff!  size, which is expected since buffers are at least
+	 * PAGE_SIZEd.  In this case packets up to RX_COPY_THRES have only one
+	 * fragment.
+	 */
+	if (gl->tot_len <= RX_COPY_THRES) {
+		/* small packets have only one fragment */
+		skb = alloc_skb(gl->tot_len, GFP_ATOMIC);
+		if (unlikely(!skb))
+			goto out;
+		__skb_put(skb, gl->tot_len);
+		skb_copy_to_linear_data(skb, gl->va, gl->tot_len);
+	} else {
+		skb = alloc_skb(skb_len, GFP_ATOMIC);
+		if (unlikely(!skb))
+			goto out;
+		__skb_put(skb, pull_len);
+		skb_copy_to_linear_data(skb, gl->va, pull_len);
+
+		ssi = skb_shinfo(skb);
+		ssi->frags[0].page = gl->frags[0].page;
+		ssi->frags[0].page_offset = gl->frags[0].page_offset + pull_len;
+		ssi->frags[0].size = gl->frags[0].size - pull_len;
+		if (gl->nfrags > 1)
+			memcpy(&ssi->frags[1], &gl->frags[1],
+			       (gl->nfrags-1) * sizeof(skb_frag_t));
+		ssi->nr_frags = gl->nfrags;
+
+		skb->len = gl->tot_len;
+		skb->data_len = skb->len - pull_len;
+		skb->truesize += skb->data_len;
+
+		/* Get a reference for the last page, we don't own it */
+		get_page(gl->frags[gl->nfrags - 1].page);
+	}
+
+out:
+	return skb;
+}
+
 /**
  *	t4vf_pktgl_free - free a packet gather list
  *	@gl: the gather list
@@ -1463,10 +1525,8 @@ int t4vf_ethrx_handler(struct sge_rspq *rspq, const __be64 *rsp,
 {
 	struct sk_buff *skb;
 	struct port_info *pi;
-	struct skb_shared_info *ssi;
 	const struct cpl_rx_pkt *pkt = (void *)&rsp[1];
 	bool csum_ok = pkt->csum_calc && !pkt->err_vec;
-	unsigned int len = be16_to_cpu(pkt->len);
 	struct sge_eth_rxq *rxq = container_of(rspq, struct sge_eth_rxq, rspq);
 
 	/*
@@ -1481,42 +1541,14 @@ int t4vf_ethrx_handler(struct sge_rspq *rspq, const __be64 *rsp,
 	}
 
 	/*
-	 * If the ingress packet is small enough, allocate an skb large enough
-	 * for all of the data and copy it inline.  Otherwise, allocate an skb
-	 * with enough room to pull in the header and reference the rest of
-	 * the data via the skb fragment list.
+	 * Convert the Packet Gather List into an skb.
 	 */
-	if (len <= RX_COPY_THRES) {
-		/* small packets have only one fragment */
-		skb = alloc_skb(gl->frags[0].size, GFP_ATOMIC);
-		if (!skb)
-			goto nomem;
-		__skb_put(skb, gl->frags[0].size);
-		skb_copy_to_linear_data(skb, gl->va, gl->frags[0].size);
-	} else {
-		skb = alloc_skb(RX_PKT_PULL_LEN, GFP_ATOMIC);
-		if (!skb)
-			goto nomem;
-		__skb_put(skb, RX_PKT_PULL_LEN);
-		skb_copy_to_linear_data(skb, gl->va, RX_PKT_PULL_LEN);
-
-		ssi = skb_shinfo(skb);
-		ssi->frags[0].page = gl->frags[0].page;
-		ssi->frags[0].page_offset = (gl->frags[0].page_offset +
-					     RX_PKT_PULL_LEN);
-		ssi->frags[0].size = gl->frags[0].size - RX_PKT_PULL_LEN;
-		if (gl->nfrags > 1)
-			memcpy(&ssi->frags[1], &gl->frags[1],
-			       (gl->nfrags-1) * sizeof(skb_frag_t));
-		ssi->nr_frags = gl->nfrags;
-		skb->len = len + PKTSHIFT;
-		skb->data_len = skb->len - RX_PKT_PULL_LEN;
-		skb->truesize += skb->data_len;
-
-		/* Get a reference for the last page, we don't own it */
-		get_page(gl->frags[gl->nfrags - 1].page);
+	skb = t4vf_pktgl_to_skb(gl, RX_SKB_LEN, RX_PULL_LEN);
+	if (unlikely(!skb)) {
+		t4vf_pktgl_free(gl);
+		rxq->stats.rx_drops++;
+		return 0;
 	}
-
 	__skb_pull(skb, PKTSHIFT);
 	skb->protocol = eth_type_trans(skb, rspq->netdev);
 	skb_record_rx_queue(skb, rspq->idx);
@@ -1549,11 +1581,6 @@ int t4vf_ethrx_handler(struct sge_rspq *rspq, const __be64 *rsp,
 		netif_receive_skb(skb);
 
 	return 0;
-
-nomem:
-	t4vf_pktgl_free(gl);
-	rxq->stats.rx_drops++;
-	return 0;
 }
 
 /**

From 8b6edf878a28979df6057cf414c51ab39bc3cc6f Mon Sep 17 00:00:00 2001
From: Casey Leedom <leedom@chelsio.com>
Date: Thu, 11 Nov 2010 09:06:51 +0000
Subject: [PATCH 0556/1066] cxgb4vf: flesh out PCI Device ID Table ...

Add a bunch of T4 Device IDs for the VF Driver.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb4vf/cxgb4vf_main.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
index 24808ac9976e..4487b1ace660 100644
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/cxgb4vf/cxgb4vf_main.c
@@ -2829,6 +2829,14 @@ static struct pci_device_id cxgb4vf_pci_tbl[] = {
 	CH_DEVICE(0x4800, 0),	/* T440-dbg */
 	CH_DEVICE(0x4801, 0),	/* T420-cr */
 	CH_DEVICE(0x4802, 0),	/* T422-cr */
+	CH_DEVICE(0x4803, 0),	/* T440-cr */
+	CH_DEVICE(0x4804, 0),	/* T420-bch */
+	CH_DEVICE(0x4805, 0),   /* T440-bch */
+	CH_DEVICE(0x4806, 0),	/* T460-ch */
+	CH_DEVICE(0x4807, 0),	/* T420-so */
+	CH_DEVICE(0x4808, 0),	/* T420-cx */
+	CH_DEVICE(0x4809, 0),	/* T420-bt */
+	CH_DEVICE(0x480a, 0),   /* T404-bt */
 	{ 0, }
 };
 

From e7a3795f56122cc92530c3f9412b8ff19b70184c Mon Sep 17 00:00:00 2001
From: Casey Leedom <leedom@chelsio.com>
Date: Thu, 11 Nov 2010 09:06:52 +0000
Subject: [PATCH 0557/1066] cxgb4vf: Fail open if link_start() fails.

Fail open if link_start() fails.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb4vf/cxgb4vf_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
index 4487b1ace660..8da3bda13f33 100644
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/cxgb4vf/cxgb4vf_main.c
@@ -753,7 +753,9 @@ static int cxgb4vf_open(struct net_device *dev)
 	if (err)
 		return err;
 	set_bit(pi->port_id, &adapter->open_device_map);
-	link_start(dev);
+	err = link_start(dev);
+	if (err)
+		return err;
 	netif_tx_start_all_queues(dev);
 	return 0;
 }

From e68e6133e2daef6fc40e91621a1e26938e428e9e Mon Sep 17 00:00:00 2001
From: Casey Leedom <leedom@chelsio.com>
Date: Thu, 11 Nov 2010 09:06:53 +0000
Subject: [PATCH 0558/1066] cxgb4vf: add call to Firmware to reset VF State.

Add call to Firmware to reset its VF State when we first attach to the VF.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb4vf/cxgb4vf_main.c | 16 ++++++++++++++++
 drivers/net/cxgb4vf/t4vf_common.h  |  1 +
 drivers/net/cxgb4vf/t4vf_hw.c      | 19 +++++++++++++++++++
 3 files changed, 36 insertions(+)

diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
index 8da3bda13f33..c3449bbc585a 100644
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/cxgb4vf/cxgb4vf_main.c
@@ -2064,6 +2064,22 @@ static int adap_init0(struct adapter *adapter)
 		return err;
 	}
 
+	/*
+	 * Some environments do not properly handle PCIE FLRs -- e.g. in Linux
+	 * 2.6.31 and later we can't call pci_reset_function() in order to
+	 * issue an FLR because of a self- deadlock on the device semaphore.
+	 * Meanwhile, the OS infrastructure doesn't issue FLRs in all the
+	 * cases where they're needed -- for instance, some versions of KVM
+	 * fail to reset "Assigned Devices" when the VM reboots.  Therefore we
+	 * use the firmware based reset in order to reset any per function
+	 * state.
+	 */
+	err = t4vf_fw_reset(adapter);
+	if (err < 0) {
+		dev_err(adapter->pdev_dev, "FW reset failed: err=%d\n", err);
+		return err;
+	}
+
 	/*
 	 * Grab basic operational parameters.  These will predominantly have
 	 * been set up by the Physical Function Driver or will be hard coded
diff --git a/drivers/net/cxgb4vf/t4vf_common.h b/drivers/net/cxgb4vf/t4vf_common.h
index 873cb7d86c57..a65c80aed1f2 100644
--- a/drivers/net/cxgb4vf/t4vf_common.h
+++ b/drivers/net/cxgb4vf/t4vf_common.h
@@ -235,6 +235,7 @@ static inline int t4vf_wr_mbox_ns(struct adapter *adapter, const void *cmd,
 int __devinit t4vf_wait_dev_ready(struct adapter *);
 int __devinit t4vf_port_init(struct adapter *, int);
 
+int t4vf_fw_reset(struct adapter *);
 int t4vf_query_params(struct adapter *, unsigned int, const u32 *, u32 *);
 int t4vf_set_params(struct adapter *, unsigned int, const u32 *, const u32 *);
 
diff --git a/drivers/net/cxgb4vf/t4vf_hw.c b/drivers/net/cxgb4vf/t4vf_hw.c
index ea1c123f0cb4..e306c20dfaee 100644
--- a/drivers/net/cxgb4vf/t4vf_hw.c
+++ b/drivers/net/cxgb4vf/t4vf_hw.c
@@ -325,6 +325,25 @@ int __devinit t4vf_port_init(struct adapter *adapter, int pidx)
 	return 0;
 }
 
+/**
+ *      t4vf_fw_reset - issue a reset to FW
+ *      @adapter: the adapter
+ *
+ *	Issues a reset command to FW.  For a Physical Function this would
+ *	result in the Firmware reseting all of its state.  For a Virtual
+ *	Function this just resets the state associated with the VF.
+ */
+int t4vf_fw_reset(struct adapter *adapter)
+{
+	struct fw_reset_cmd cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.op_to_write = cpu_to_be32(FW_CMD_OP(FW_RESET_CMD) |
+				      FW_CMD_WRITE);
+	cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
+	return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
+}
+
 /**
  *	t4vf_query_params - query FW or device parameters
  *	@adapter: the adapter

From 5ef41308f94dcbb3b7afc56cdef1c2ba53fa5d2f Mon Sep 17 00:00:00 2001
From: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Fri, 12 Nov 2010 12:44:42 -0800
Subject: [PATCH 0559/1066] x25: Prevent crashing when parsing bad X.25
 facilities

Now with improved comma support.

On parsing malformed X.25 facilities, decrementing the remaining length
may cause it to underflow.  Since the length is an unsigned integer,
this will result in the loop continuing until the kernel crashes.

This patch adds checks to ensure decrementing the remaining length does
not cause it to wrap around.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/x25/x25_facilities.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/net/x25/x25_facilities.c b/net/x25/x25_facilities.c
index 3a8c4c419cd4..55187c8f6420 100644
--- a/net/x25/x25_facilities.c
+++ b/net/x25/x25_facilities.c
@@ -61,6 +61,8 @@ int x25_parse_facilities(struct sk_buff *skb, struct x25_facilities *facilities,
 	while (len > 0) {
 		switch (*p & X25_FAC_CLASS_MASK) {
 		case X25_FAC_CLASS_A:
+			if (len < 2)
+				return 0;
 			switch (*p) {
 			case X25_FAC_REVERSE:
 				if((p[1] & 0x81) == 0x81) {
@@ -104,6 +106,8 @@ int x25_parse_facilities(struct sk_buff *skb, struct x25_facilities *facilities,
 			len -= 2;
 			break;
 		case X25_FAC_CLASS_B:
+			if (len < 3)
+				return 0;
 			switch (*p) {
 			case X25_FAC_PACKET_SIZE:
 				facilities->pacsize_in  = p[1];
@@ -125,6 +129,8 @@ int x25_parse_facilities(struct sk_buff *skb, struct x25_facilities *facilities,
 			len -= 3;
 			break;
 		case X25_FAC_CLASS_C:
+			if (len < 4)
+				return 0;
 			printk(KERN_DEBUG "X.25: unknown facility %02X, "
 			       "values %02X, %02X, %02X\n",
 			       p[0], p[1], p[2], p[3]);
@@ -132,6 +138,8 @@ int x25_parse_facilities(struct sk_buff *skb, struct x25_facilities *facilities,
 			len -= 4;
 			break;
 		case X25_FAC_CLASS_D:
+			if (len < p[1] + 2)
+				return 0;
 			switch (*p) {
 			case X25_FAC_CALLING_AE:
 				if (p[1] > X25_MAX_DTE_FACIL_LEN || p[1] <= 1)
@@ -149,9 +157,7 @@ int x25_parse_facilities(struct sk_buff *skb, struct x25_facilities *facilities,
 				break;
 			default:
 				printk(KERN_DEBUG "X.25: unknown facility %02X,"
-					"length %d, values %02X, %02X, "
-					"%02X, %02X\n",
-					p[0], p[1], p[2], p[3], p[4], p[5]);
+					"length %d\n", p[0], p[1]);
 				break;
 			}
 			len -= p[1] + 2;

From 8f49c2703b33519aaaccc63f571b465b9d2b3a2d Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 12 Nov 2010 13:35:00 -0800
Subject: [PATCH 0560/1066] tcp: Don't change unlocked socket state in
 tcp_v4_err().

Alexey Kuznetsov noticed a regression introduced by
commit f1ecd5d9e7366609d640ff4040304ea197fbc618
("Revert Backoff [v3]: Revert RTO on ICMP destination unreachable")

The RTO and timer modification code added to tcp_v4_err()
doesn't check sock_owned_by_user(), which if true means we
don't have exclusive access to the socket and therefore cannot
modify it's critical state.

Just skip this new code block if sock_owned_by_user() is true
and eliminate the now superfluous sock_owned_by_user() code
block contained within.

Reported-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
CC: Damian Lukowski <damian@tvk.rwth-aachen.de>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
---
 net/ipv4/tcp_ipv4.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 8f8527d41682..69ccbc1dde9c 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -415,6 +415,9 @@ void tcp_v4_err(struct sk_buff *icmp_skb, u32 info)
 		    !icsk->icsk_backoff)
 			break;
 
+		if (sock_owned_by_user(sk))
+			break;
+
 		icsk->icsk_backoff--;
 		inet_csk(sk)->icsk_rto = __tcp_set_rto(tp) <<
 					 icsk->icsk_backoff;
@@ -429,11 +432,6 @@ void tcp_v4_err(struct sk_buff *icmp_skb, u32 info)
 		if (remaining) {
 			inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS,
 						  remaining, TCP_RTO_MAX);
-		} else if (sock_owned_by_user(sk)) {
-			/* RTO revert clocked out retransmission,
-			 * but socket is locked. Will defer. */
-			inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS,
-						  HZ/20, TCP_RTO_MAX);
 		} else {
 			/* RTO revert clocked out retransmission.
 			 * Will retransmit now */

From 2de795707294972f6c34bae9de713e502c431296 Mon Sep 17 00:00:00 2001
From: Lorenzo Colitti <lorenzo@google.com>
Date: Wed, 27 Oct 2010 18:16:49 +0000
Subject: [PATCH 0561/1066] ipv6: addrconf: don't remove address state on
 ifdown if the address is being kept

Currently, addrconf_ifdown does not delete statically configured IPv6
addresses when the interface is brought down. The intent is that when
the interface comes back up the address will be usable again. However,
this doesn't actually work, because the system stops listening on the
corresponding solicited-node multicast address, so the address cannot
respond to neighbor solicitations and thus receive traffic. Also, the
code notifies the rest of the system that the address is being deleted
(e.g, RTM_DELADDR), even though it is not. Fix it so that none of this
state is updated if the address is being kept on the interface.

Tested: Added a statically configured IPv6 address to an interface,
started ping, brought link down, brought link up again. When link came
up ping kept on going and "ip -6 maddr" showed that the host was still
subscribed to there

Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/addrconf.c | 24 ++++++++----------------
 1 file changed, 8 insertions(+), 16 deletions(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index e048ec62d109..b41ce0f0d514 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -2740,10 +2740,6 @@ static int addrconf_ifdown(struct net_device *dev, int how)
 			/* Flag it for later restoration when link comes up */
 			ifa->flags |= IFA_F_TENTATIVE;
 			ifa->state = INET6_IFADDR_STATE_DAD;
-
-			write_unlock_bh(&idev->lock);
-
-			in6_ifa_hold(ifa);
 		} else {
 			list_del(&ifa->if_list);
 
@@ -2758,19 +2754,15 @@ static int addrconf_ifdown(struct net_device *dev, int how)
 			ifa->state = INET6_IFADDR_STATE_DEAD;
 			spin_unlock_bh(&ifa->state_lock);
 
-			if (state == INET6_IFADDR_STATE_DEAD)
-				goto put_ifa;
+			if (state == INET6_IFADDR_STATE_DEAD) {
+				in6_ifa_put(ifa);
+			} else {
+				__ipv6_ifa_notify(RTM_DELADDR, ifa);
+				atomic_notifier_call_chain(&inet6addr_chain,
+							   NETDEV_DOWN, ifa);
+			}
+			write_lock_bh(&idev->lock);
 		}
-
-		__ipv6_ifa_notify(RTM_DELADDR, ifa);
-		if (ifa->state == INET6_IFADDR_STATE_DEAD)
-			atomic_notifier_call_chain(&inet6addr_chain,
-						   NETDEV_DOWN, ifa);
-
-put_ifa:
-		in6_ifa_put(ifa);
-
-		write_lock_bh(&idev->lock);
 	}
 
 	list_splice(&keep_list, &idev->addr_list);

From 19c0ef6b36a67fc579c77bb9b4da00e084fdb667 Mon Sep 17 00:00:00 2001
From: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Date: Sat, 6 Nov 2010 05:11:24 +0000
Subject: [PATCH 0562/1066] axnet_cs: fix resume problem for some Ax88790 chip

axnet_cs:
    Some Ax88790 chip need to reinitialize the CISREG_CCSR register
    after resume.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/pcmcia/axnet_cs.c | 30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index d2e166e29dda..8a4d19e5de06 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -111,13 +111,14 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id);
 
 typedef struct axnet_dev_t {
 	struct pcmcia_device	*p_dev;
-    caddr_t		base;
-    struct timer_list	watchdog;
-    int			stale, fast_poll;
-    u_short		link_status;
-    u_char		duplex_flag;
-    int			phy_id;
-    int			flags;
+	caddr_t	base;
+	struct timer_list	watchdog;
+	int	stale, fast_poll;
+	u_short	link_status;
+	u_char	duplex_flag;
+	int	phy_id;
+	int	flags;
+	int	active_low;
 } axnet_dev_t;
 
 static inline axnet_dev_t *PRIV(struct net_device *dev)
@@ -322,6 +323,8 @@ static int axnet_config(struct pcmcia_device *link)
     if (info->flags & IS_AX88790)
 	outb(0x10, dev->base_addr + AXNET_GPIO);  /* select Internal PHY */
 
+    info->active_low = 0;
+
     for (i = 0; i < 32; i++) {
 	j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1);
 	j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2);
@@ -329,15 +332,18 @@ static int axnet_config(struct pcmcia_device *link)
 	if ((j != 0) && (j != 0xffff)) break;
     }
 
-    /* Maybe PHY is in power down mode. (PPD_SET = 1) 
-       Bit 2 of CCSR is active low. */ 
     if (i == 32) {
+	/* Maybe PHY is in power down mode. (PPD_SET = 1)
+	   Bit 2 of CCSR is active low. */
 	pcmcia_write_config_byte(link, CISREG_CCSR, 0x04);
 	for (i = 0; i < 32; i++) {
 	    j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1);
 	    j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2);
 	    if (j == j2) continue;
-	    if ((j != 0) && (j != 0xffff)) break;
+	    if ((j != 0) && (j != 0xffff)) {
+		info->active_low = 1;
+		break;
+	    }
 	}
     }
 
@@ -383,8 +389,12 @@ static int axnet_suspend(struct pcmcia_device *link)
 static int axnet_resume(struct pcmcia_device *link)
 {
 	struct net_device *dev = link->priv;
+	axnet_dev_t *info = PRIV(dev);
 
 	if (link->open) {
+		if (info->active_low == 1)
+			pcmcia_write_config_byte(link, CISREG_CCSR, 0x04);
+
 		axnet_reset_8390(dev);
 		AX88190_init(dev, 1);
 		netif_device_attach(dev);

From cbaf087a9f5e4721e83e8681ef328158f2298c6f Mon Sep 17 00:00:00 2001
From: Ben Greear <greearb@candelatech.com>
Date: Mon, 8 Nov 2010 09:13:48 +0000
Subject: [PATCH 0563/1066] docs: Add neigh/gc_thresh3 and route/max_size
 documentation.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 Documentation/networking/ip-sysctl.txt | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index c7165f4cb792..fe95105992c5 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -20,6 +20,15 @@ ip_no_pmtu_disc - BOOLEAN
 min_pmtu - INTEGER
 	default 562 - minimum discovered Path MTU
 
+route/max_size - INTEGER
+	Maximum number of routes allowed in the kernel.  Increase
+	this when using large numbers of interfaces and/or routes.
+
+neigh/default/gc_thresh3 - INTEGER
+	Maximum number of neighbor entries allowed.  Increase this
+	when using large numbers of interfaces and when communicating
+	with large numbers of directly-connected peers.
+
 mtu_expires - INTEGER
 	Time, in seconds, that cached PMTU information is kept.
 

From 403856532734317d25ec86ab1e75b8133db7acc6 Mon Sep 17 00:00:00 2001
From: Ben Greear <greearb@candelatech.com>
Date: Mon, 8 Nov 2010 12:33:48 +0000
Subject: [PATCH 0564/1066] ipv6: Warn users if maximum number of routes is
 reached.

This gives users at least some clue as to what the problem
might be and how to go about fixing it.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/route.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index fc328339be99..96455ffb76fb 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1945,8 +1945,12 @@ struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev,
 	struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops);
 	struct neighbour *neigh;
 
-	if (rt == NULL)
+	if (rt == NULL) {
+		if (net_ratelimit())
+			pr_warning("IPv6:  Maximum number of routes reached,"
+				   " consider increasing route/max_size.\n");
 		return ERR_PTR(-ENOMEM);
+	}
 
 	dev_hold(net->loopback_dev);
 	in6_dev_hold(idev);

From 6c4f199411f254bf3713b04ed8653f0955883309 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Tue, 9 Nov 2010 11:54:19 +0000
Subject: [PATCH 0565/1066] gianfar: Do not call device_set_wakeup_enable()
 under a spinlock

The gianfar driver calls device_set_wakeup_enable() under a spinlock,
which causes a problem to happen after the recent core power
management changes, because this function can sleep now.  Fix this
by moving the device_set_wakeup_enable() call out of the
spinlock-protected area.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/gianfar_ethtool.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 5c566ebc54b8..3bc8e276ba4d 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -635,9 +635,10 @@ static int gfar_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	if (wol->wolopts & ~WAKE_MAGIC)
 		return -EINVAL;
 
+	device_set_wakeup_enable(&dev->dev, wol->wolopts & WAKE_MAGIC);
+
 	spin_lock_irqsave(&priv->bflock, flags);
-	priv->wol_en = wol->wolopts & WAKE_MAGIC ? 1 : 0;
-	device_set_wakeup_enable(&dev->dev, priv->wol_en);
+	priv->wol_en =  !!device_may_wakeup(&dev->dev);
 	spin_unlock_irqrestore(&priv->bflock, flags);
 
 	return 0;

From 0597d1b99fcfc2c0eada09a698f85ed413d4ba84 Mon Sep 17 00:00:00 2001
From: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Wed, 10 Nov 2010 12:10:30 +0000
Subject: [PATCH 0566/1066] can-bcm: fix minor heap overflow

On 64-bit platforms the ASCII representation of a pointer may be up to 17
bytes long. This patch increases the length of the buffer accordingly.

http://marc.info/?l=linux-netdev&m=128872251418192&w=2

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
CC: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/can/bcm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/can/bcm.c b/net/can/bcm.c
index 08ffe9e4be20..6faa8256e10c 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -125,7 +125,7 @@ struct bcm_sock {
 	struct list_head tx_ops;
 	unsigned long dropped_usr_msgs;
 	struct proc_dir_entry *bcm_proc_read;
-	char procname [9]; /* pointer printed in ASCII with \0 */
+	char procname [20]; /* pointer printed in ASCII with \0 */
 };
 
 static inline struct bcm_sock *bcm_sk(const struct sock *sk)

From 2a5f07b5ec098edc69e05fdd2f35d3fbb1235723 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 1 Nov 2010 11:39:19 +0100
Subject: [PATCH 0567/1066] libata: fix NULL sdev dereference race in
 atapi_qc_complete()

SCSI commands may be issued between __scsi_add_device() and dev->sdev
assignment, so it's unsafe for ata_qc_complete() to dereference
dev->sdev->locked without checking whether it's NULL or not.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-scsi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index d050e073e570..3f91c01c217f 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2552,8 +2552,11 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
 		 *
 		 * If door lock fails, always clear sdev->locked to
 		 * avoid this infinite loop.
+		 *
+		 * This may happen before SCSI scan is complete.  Make
+		 * sure qc->dev->sdev isn't NULL before dereferencing.
 		 */
-		if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL)
+		if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL && qc->dev->sdev)
 			qc->dev->sdev->locked = 0;
 
 		qc->scsicmd->result = SAM_STAT_CHECK_CONDITION;

From f60215a1302f03ad435f8365c0dd85bdb022cac3 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 12 Nov 2010 12:01:41 +0100
Subject: [PATCH 0568/1066] pata_legacy: fix CONFIG_PATA_WINBOND_VLB_MODULE
 test

pata_legacy is incorrectly testing PATA_WINBOND_VLB_MODULE instead of
CONFIG_PATA_WINBOND_VLB_MODULE.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "Robert P. J. Day" <rpjday@crashcourse.ca>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/pata_legacy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index eaf194138f21..6bd9425ba5ab 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -142,7 +142,7 @@ static int autospeed;		/* Chip present which snoops speed changes */
 static int pio_mask = ATA_PIO4;	/* PIO range for autospeed devices */
 static int iordy_mask = 0xFFFFFFFF;	/* Use iordy if available */
 
-#ifdef PATA_WINBOND_VLB_MODULE
+#ifdef CONFIG_PATA_WINBOND_VLB_MODULE
 static int winbond = 1;		/* Set to probe Winbond controllers,
 					give I/O port if non standard */
 #else

From f2543790875b088e2a58aa12ee1ac20a75d6126d Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Tue, 26 Oct 2010 12:25:43 +0200
Subject: [PATCH 0569/1066] drivers/ata/pata_octeon_cf.c: delete double
 assignment

Delete successive assignments to the same location.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression i;
@@

*i = ...;
 i = ...;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/pata_octeon_cf.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 74b829817891..fa1b95a9a7ff 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -652,8 +652,6 @@ static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance)
 		struct octeon_cf_data *ocd;
 
 		ap = host->ports[i];
-		ocd = ap->dev->platform_data;
-
 		ocd = ap->dev->platform_data;
 		cf_port = ap->private_data;
 		dma_int.u64 =

From 7e77506a5918d82cafa2ffa783ab57c23f9e9817 Mon Sep 17 00:00:00 2001
From: Ian Campbell <ian.campbell@citrix.com>
Date: Thu, 30 Sep 2010 12:37:26 +0100
Subject: [PATCH 0570/1066] xen: implement XENMEM_machphys_mapping

This hypercall allows Xen to specify a non-default location for the
machine to physical mapping. This capability is used when running a 32
bit domain 0 on a 64 bit hypervisor to shrink the hypervisor hole to
exactly the size required.

[ Impact: add Xen hypercall definitions ]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
---
 arch/x86/include/asm/xen/interface.h    |  6 +++---
 arch/x86/include/asm/xen/interface_32.h |  5 +++++
 arch/x86/include/asm/xen/interface_64.h | 13 +------------
 arch/x86/include/asm/xen/page.h         |  7 ++++---
 arch/x86/xen/enlighten.c                |  7 +++++++
 arch/x86/xen/mmu.c                      | 14 ++++++++++++++
 include/xen/interface/memory.h          | 13 +++++++++++++
 7 files changed, 47 insertions(+), 18 deletions(-)

diff --git a/arch/x86/include/asm/xen/interface.h b/arch/x86/include/asm/xen/interface.h
index e8506c1f0c55..1c10c88ee4e1 100644
--- a/arch/x86/include/asm/xen/interface.h
+++ b/arch/x86/include/asm/xen/interface.h
@@ -61,9 +61,9 @@ DEFINE_GUEST_HANDLE(void);
 #define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
 #endif
 
-#ifndef machine_to_phys_mapping
-#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
-#endif
+#define MACH2PHYS_VIRT_START  mk_unsigned_long(__MACH2PHYS_VIRT_START)
+#define MACH2PHYS_VIRT_END    mk_unsigned_long(__MACH2PHYS_VIRT_END)
+#define MACH2PHYS_NR_ENTRIES  ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>__MACH2PHYS_SHIFT)
 
 /* Maximum number of virtual CPUs in multi-processor guests. */
 #define MAX_VIRT_CPUS 32
diff --git a/arch/x86/include/asm/xen/interface_32.h b/arch/x86/include/asm/xen/interface_32.h
index 42a7e004ae5c..8413688b2571 100644
--- a/arch/x86/include/asm/xen/interface_32.h
+++ b/arch/x86/include/asm/xen/interface_32.h
@@ -32,6 +32,11 @@
 /* And the trap vector is... */
 #define TRAP_INSTR "int $0x82"
 
+#define __MACH2PHYS_VIRT_START 0xF5800000
+#define __MACH2PHYS_VIRT_END   0xF6800000
+
+#define __MACH2PHYS_SHIFT      2
+
 /*
  * Virtual addresses beyond this are not modifiable by guest OSes. The
  * machine->physical mapping table starts at this address, read-only.
diff --git a/arch/x86/include/asm/xen/interface_64.h b/arch/x86/include/asm/xen/interface_64.h
index 100d2662b97c..839a4811cf98 100644
--- a/arch/x86/include/asm/xen/interface_64.h
+++ b/arch/x86/include/asm/xen/interface_64.h
@@ -39,18 +39,7 @@
 #define __HYPERVISOR_VIRT_END   0xFFFF880000000000
 #define __MACH2PHYS_VIRT_START  0xFFFF800000000000
 #define __MACH2PHYS_VIRT_END    0xFFFF804000000000
-
-#ifndef HYPERVISOR_VIRT_START
-#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
-#define HYPERVISOR_VIRT_END   mk_unsigned_long(__HYPERVISOR_VIRT_END)
-#endif
-
-#define MACH2PHYS_VIRT_START  mk_unsigned_long(__MACH2PHYS_VIRT_START)
-#define MACH2PHYS_VIRT_END    mk_unsigned_long(__MACH2PHYS_VIRT_END)
-#define MACH2PHYS_NR_ENTRIES  ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>3)
-#ifndef machine_to_phys_mapping
-#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
-#endif
+#define __MACH2PHYS_SHIFT       3
 
 /*
  * int HYPERVISOR_set_segment_base(unsigned int which, unsigned long base)
diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
index dd8c1414b3d5..8760cc60a21c 100644
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -5,6 +5,7 @@
 #include <linux/types.h>
 #include <linux/spinlock.h>
 #include <linux/pfn.h>
+#include <linux/mm.h>
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
@@ -35,6 +36,8 @@ typedef struct xpaddr {
 #define MAX_DOMAIN_PAGES						\
     ((unsigned long)((u64)CONFIG_XEN_MAX_DOMAIN_MEMORY * 1024 * 1024 * 1024 / PAGE_SIZE))
 
+extern unsigned long *machine_to_phys_mapping;
+extern unsigned int   machine_to_phys_order;
 
 extern unsigned long get_phys_to_machine(unsigned long pfn);
 extern bool set_phys_to_machine(unsigned long pfn, unsigned long mfn);
@@ -69,10 +72,8 @@ static inline unsigned long mfn_to_pfn(unsigned long mfn)
 	if (xen_feature(XENFEAT_auto_translated_physmap))
 		return mfn;
 
-#if 0
 	if (unlikely((mfn >> machine_to_phys_order) != 0))
-		return max_mapnr;
-#endif
+		return ~0;
 
 	pfn = 0;
 	/*
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 235c0f4d3861..bd3554934613 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -75,6 +75,11 @@ DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info);
 enum xen_domain_type xen_domain_type = XEN_NATIVE;
 EXPORT_SYMBOL_GPL(xen_domain_type);
 
+unsigned long *machine_to_phys_mapping = (void *)MACH2PHYS_VIRT_START;
+EXPORT_SYMBOL(machine_to_phys_mapping);
+unsigned int   machine_to_phys_order;
+EXPORT_SYMBOL(machine_to_phys_order);
+
 struct start_info *xen_start_info;
 EXPORT_SYMBOL_GPL(xen_start_info);
 
@@ -1097,6 +1102,8 @@ asmlinkage void __init xen_start_kernel(void)
 
 	xen_domain_type = XEN_PV_DOMAIN;
 
+	xen_setup_machphys_mapping();
+
 	/* Install Xen paravirt ops */
 	pv_info = xen_info;
 	pv_init_ops = xen_init_ops;
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 21ed8d7f75a5..bd2713a82571 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -2034,6 +2034,20 @@ static __init void xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
 	set_page_prot(pmd, PAGE_KERNEL_RO);
 }
 
+void __init xen_setup_machphys_mapping(void)
+{
+	struct xen_machphys_mapping mapping;
+	unsigned long machine_to_phys_nr_ents;
+
+	if (HYPERVISOR_memory_op(XENMEM_machphys_mapping, &mapping) == 0) {
+		machine_to_phys_mapping = (unsigned long *)mapping.v_start;
+		machine_to_phys_nr_ents = mapping.max_mfn + 1;
+	} else {
+		machine_to_phys_nr_ents = MACH2PHYS_NR_ENTRIES;
+	}
+	machine_to_phys_order = fls(machine_to_phys_nr_ents - 1);
+}
+
 #ifdef CONFIG_X86_64
 static void convert_pfn_mfn(void *v)
 {
diff --git a/include/xen/interface/memory.h b/include/xen/interface/memory.h
index d7a6c13bde69..eac3ce153719 100644
--- a/include/xen/interface/memory.h
+++ b/include/xen/interface/memory.h
@@ -140,6 +140,19 @@ struct xen_machphys_mfn_list {
 };
 DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mfn_list);
 
+/*
+ * Returns the location in virtual address space of the machine_to_phys
+ * mapping table. Architectures which do not have a m2p table, or which do not
+ * map it by default into guest address space, do not implement this command.
+ * arg == addr of xen_machphys_mapping_t.
+ */
+#define XENMEM_machphys_mapping     12
+struct xen_machphys_mapping {
+    unsigned long v_start, v_end; /* Start and end virtual addresses.   */
+    unsigned long max_mfn;        /* Maximum MFN that can be looked up. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mapping_t);
+
 /*
  * Sets the GPFN at which a particular page appears in the specified guest's
  * pseudophysical address space.

From 91e86e560d0b3ce4c5fc64fd2bbb99f856a30a4e Mon Sep 17 00:00:00 2001
From: Steven Rostedt <srostedt@redhat.com>
Date: Wed, 10 Nov 2010 12:56:12 +0100
Subject: [PATCH 0571/1066] tracing: Fix recursive user stack trace

The user stack trace can fault when examining the trace. Which
would call the do_page_fault handler, which would trace again,
which would do the user stack trace, which would fault and call
do_page_fault again ...

Thus this is causing a recursive bug. We need to have a recursion
detector here.

[ Resubmitted by Jiri Olsa ]

[ Eric Dumazet recommended using __this_cpu_* instead of __get_cpu_* ]

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1289390172-9730-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 kernel/trace/trace.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 82d9b8106cd0..ee6a7339cf0e 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1284,6 +1284,8 @@ void trace_dump_stack(void)
 	__ftrace_trace_stack(global_trace.buffer, flags, 3, preempt_count());
 }
 
+static DEFINE_PER_CPU(int, user_stack_count);
+
 void
 ftrace_trace_userstack(struct ring_buffer *buffer, unsigned long flags, int pc)
 {
@@ -1302,6 +1304,18 @@ ftrace_trace_userstack(struct ring_buffer *buffer, unsigned long flags, int pc)
 	if (unlikely(in_nmi()))
 		return;
 
+	/*
+	 * prevent recursion, since the user stack tracing may
+	 * trigger other kernel events.
+	 */
+	preempt_disable();
+	if (__this_cpu_read(user_stack_count))
+		goto out;
+
+	__this_cpu_inc(user_stack_count);
+
+
+
 	event = trace_buffer_lock_reserve(buffer, TRACE_USER_STACK,
 					  sizeof(*entry), flags, pc);
 	if (!event)
@@ -1319,6 +1333,11 @@ ftrace_trace_userstack(struct ring_buffer *buffer, unsigned long flags, int pc)
 	save_stack_trace_user(&trace);
 	if (!filter_check_discard(call, entry, buffer, event))
 		ring_buffer_unlock_commit(buffer, event);
+
+	__this_cpu_dec(user_stack_count);
+
+ out:
+	preempt_enable();
 }
 
 #ifdef UNUSED

From c39d8d558dd79ce3444bfd590f5d8f0b8ad85879 Mon Sep 17 00:00:00 2001
From: Kyungmin Park <kyungmin.park@samsung.com>
Date: Sat, 13 Nov 2010 16:01:59 +0900
Subject: [PATCH 0572/1066] ARM: SAMSUNG: Fix HAVE_S3C2410_WATCHDOG warnings

Fix build warnings
warning: (ARCH_S3C64XX && <choice> && WATCHDOG || ARCH_S5P64X0 && <choice> && WATCHDOG ||
          ARCH_S5P6442 && <choice> && WATCHDOG || ARCH_S5PC100 && <choice> ||
          ARCH_S5PV210 && <choice> || ARCH_S5PV310 && <choice> || MACH_SMDK6410 && ARCH_S3C64XX)
         selects HAVE_S3C2410_WATCHDOG which has unmet direct dependencies (WATCHDOG)

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: Added fix same warning(mach-s3c64xx/Kconfig)]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/Kconfig              | 12 ++++++------
 arch/arm/mach-s3c64xx/Kconfig |  2 +-
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a19a5266d5fc..a30271385e70 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -677,7 +677,7 @@ config ARCH_S3C64XX
 	select USB_ARCH_HAS_OHCI
 	select SAMSUNG_GPIOLIB_4BIT
 	select HAVE_S3C2410_I2C
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S3C64XX series based systems
 
@@ -686,7 +686,7 @@ config ARCH_S5P64X0
 	select CPU_V6
 	select GENERIC_GPIO
 	select HAVE_CLK
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C
 	select HAVE_S3C_RTC
@@ -700,7 +700,7 @@ config ARCH_S5P6442
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5P6442 CPU based systems
 
@@ -713,7 +713,7 @@ config ARCH_S5PC100
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C
 	select HAVE_S3C_RTC
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5PC100 series based systems
 
@@ -728,7 +728,7 @@ config ARCH_S5PV210
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C
 	select HAVE_S3C_RTC
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
@@ -741,7 +741,7 @@ config ARCH_S5PV310
 	select GENERIC_CLOCKEVENTS
 	select HAVE_S3C_RTC
 	select HAVE_S3C2410_I2C
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5PV310 series based systems
 
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 1ca7bdc6485c..579d2f0f4dd0 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -143,7 +143,7 @@ config MACH_SMDK6410
 	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
 	select SAMSUNG_DEV_KEYPAD
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_I2C1
 	select S3C64XX_SETUP_IDE

From 20676c15ed91b5862e17a29b05ec977af483700f Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Sat, 13 Nov 2010 16:08:32 +0900
Subject: [PATCH 0573/1066] ARM: SAMSUNG: Fix HAVE_S3C2410_I2C warnings

This patch fixes following warnings.
warning: (ARCH_S3C2410 && <choice> || ARCH_S3C64XX && <choice> ||
          ARCH_S5P64X0 && <choice> || ARCH_S5PC100 && <choice> ||
          ARCH_S5PV210 && <choice> || ARCH_S5PV310 && <choice>)
         selects HAVE_S3C2410_I2C which has unmet direct dependencies (I2C)

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/Kconfig | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a30271385e70..30ef76a18ef7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -646,7 +646,7 @@ config ARCH_S3C2410
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C
+	select HAVE_S3C2410_I2C if I2C
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -676,7 +676,7 @@ config ARCH_S3C64XX
 	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
 	select SAMSUNG_GPIOLIB_4BIT
-	select HAVE_S3C2410_I2C
+	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S3C64XX series based systems
@@ -688,7 +688,7 @@ config ARCH_S5P64X0
 	select HAVE_CLK
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C
+	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC
 	help
 	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
@@ -711,7 +711,7 @@ config ARCH_S5PC100
 	select CPU_V7
 	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C
+	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
@@ -726,7 +726,7 @@ config ARCH_S5PV210
 	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_HAS_CPUFREQ
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C
+	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
@@ -740,7 +740,7 @@ config ARCH_S5PV310
 	select HAVE_CLK
 	select GENERIC_CLOCKEVENTS
 	select HAVE_S3C_RTC
-	select HAVE_S3C2410_I2C
+	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5PV310 series based systems

From 754961a8e1ef49ee2d304d2ab086cf0aa6809214 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Sat, 13 Nov 2010 16:11:46 +0900
Subject: [PATCH 0574/1066] ARM: SAMSUNG: Fix HAVE_S3C_RTC warnings

This patch fixes followng build warnings.
warning: (ARCH_S5P64X0 && <choice> || ARCH_S5PC100 && <choice> ||
          ARCH_S5PV210 && <choice> || ARCH_S5PV310 && <choice>)
         selects HAVE_S3C_RTC which has unmet direct dependencies (RTC_CLASS)

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/Kconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 30ef76a18ef7..bb854cde3f81 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -689,7 +689,7 @@ config ARCH_S5P64X0
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC
+	select HAVE_S3C_RTC if RTC_CLASS
 	help
 	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
 	  SMDK6450.
@@ -712,7 +712,7 @@ config ARCH_S5PC100
 	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC
+	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5PC100 series based systems
@@ -727,7 +727,7 @@ config ARCH_S5PV210
 	select ARCH_HAS_CPUFREQ
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC
+	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5PV210/S5PC110 series based systems
@@ -739,7 +739,7 @@ config ARCH_S5PV310
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select GENERIC_CLOCKEVENTS
-	select HAVE_S3C_RTC
+	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help

From 85345517fe6d4de27b0d6ca19fef9d28ac947c4a Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Sat, 13 Nov 2010 09:49:11 +0000
Subject: [PATCH 0575/1066] drm/i915: Retire any pending operations on the old
 scanout when switching

An old and oft reported bug, is that of the GPU hanging on a
MI_WAIT_FOR_EVENT following a mode switch. The cause is that the GPU is
waiting on a scanline counter on an inactive pipe, and so waits for a
very long time until eventually the user reboots his machine.

We can prevent this either by moving the WAIT into the kernel and
thereby incurring considerable cost on every swapbuffers, or by waiting
for the GPU to retire the last batch that accesses the framebuffer
before installing a new one. As mode switches are much rarer than swap
buffers, this looks like an easy choice.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=28964
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29252
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
---
 drivers/gpu/drm/i915/i915_drv.h      |  2 ++
 drivers/gpu/drm/i915/i915_gem.c      | 14 ++++++++++++++
 drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++
 3 files changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 90414ae86afc..409826da3099 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1045,6 +1045,8 @@ void i915_gem_clflush_object(struct drm_gem_object *obj);
 int i915_gem_object_set_domain(struct drm_gem_object *obj,
 			       uint32_t read_domains,
 			       uint32_t write_domain);
+int i915_gem_object_flush_gpu(struct drm_i915_gem_object *obj,
+			      bool interruptible);
 int i915_gem_init_ringbuffer(struct drm_device *dev);
 void i915_gem_cleanup_ringbuffer(struct drm_device *dev);
 int i915_gem_do_init(struct drm_device *dev, unsigned long start,
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index eba9b1615228..951e3d463113 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2907,6 +2907,20 @@ i915_gem_object_set_to_display_plane(struct drm_gem_object *obj,
 	return 0;
 }
 
+int
+i915_gem_object_flush_gpu(struct drm_i915_gem_object *obj,
+			  bool interruptible)
+{
+	if (!obj->active)
+		return 0;
+
+	if (obj->base.write_domain & I915_GEM_GPU_DOMAINS)
+		i915_gem_flush_ring(obj->base.dev, NULL, obj->ring,
+				    0, obj->base.write_domain);
+
+	return i915_gem_object_wait_rendering(&obj->base, interruptible);
+}
+
 /**
  * Moves a single object to the CPU read, and possibly write domain.
  *
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 48d8fd686ea9..bee24b1a58e8 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1611,6 +1611,18 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 
 		wait_event(dev_priv->pending_flip_queue,
 			   atomic_read(&obj_priv->pending_flip) == 0);
+
+		/* Big Hammer, we also need to ensure that any pending
+		 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
+		 * current scanout is retired before unpinning the old
+		 * framebuffer.
+		 */
+		ret = i915_gem_object_flush_gpu(obj_priv, false);
+		if (ret) {
+			i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj);
+			mutex_unlock(&dev->struct_mutex);
+			return ret;
+		}
 	}
 
 	ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y,

From 1c66b360fe26204e2aa14e45086b4a6b8890b1a2 Mon Sep 17 00:00:00 2001
From: Tao Ma <tao.ma@oracle.com>
Date: Sat, 13 Nov 2010 16:22:02 +0800
Subject: [PATCH 0576/1066] ocfs2: Change some lock status member in
 ocfs2_lock_res to char.

Commit 83fd9c7 changes l_level, l_requested and l_blocking of
ocfs2_lock_res from int to unsigned char. But actually it is
initially as -1(ocfs2_lock_res_init_common) which
correspoding to 255 for unsigned char. So the whole dlm lock
mechanism doesn't work now which means a disaster to ocfs2.

Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/ocfs2/ocfs2.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index d8408217e3bd..1efea3615589 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -159,7 +159,9 @@ struct ocfs2_lock_res {
 	char                     l_name[OCFS2_LOCK_ID_MAX_LEN];
 	unsigned int             l_ro_holders;
 	unsigned int             l_ex_holders;
-	unsigned char            l_level;
+	char			 l_level;
+	char			 l_requested;
+	char			 l_blocking;
 
 	/* Data packed - type enum ocfs2_lock_type */
 	unsigned char            l_type;
@@ -169,8 +171,6 @@ struct ocfs2_lock_res {
 	unsigned char            l_action;
 	/* Data packed - enum type ocfs2_unlock_action */
 	unsigned char            l_unlock_action;
-	unsigned char            l_requested;
-	unsigned char            l_blocking;
 	unsigned int             l_pending_gen;
 
 	spinlock_t               l_lock;

From ed3aada1bf34c5a9e98af167f125f8a740fc726a Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Sat, 13 Nov 2010 00:58:54 -0500
Subject: [PATCH 0577/1066] ACPI: debugfs custom_method open to non-root

Currently we have:

  --w--w--w-. 1 root root 0 2010-11-11 14:56 /sys/kernel/debug/acpi/custom_method

which is just crazy. Change this to --w-------.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: stable@kernel.org (for 2.6.36)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/acpi/debugfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/debugfs.c b/drivers/acpi/debugfs.c
index 6355b575ee5a..5df67f1d6c61 100644
--- a/drivers/acpi/debugfs.c
+++ b/drivers/acpi/debugfs.c
@@ -80,7 +80,7 @@ int __init acpi_debugfs_init(void)
 	if (!acpi_dir)
 		goto err;
 
-	cm_dentry = debugfs_create_file("custom_method", S_IWUGO,
+	cm_dentry = debugfs_create_file("custom_method", S_IWUSR,
 					acpi_dir, NULL, &cm_fops);
 	if (!cm_dentry)
 		goto err;

From 6b4e81db2552bad04100e7d5ddeed7e848f53b48 Mon Sep 17 00:00:00 2001
From: Jim Bos <jim876@xs4all.nl>
Date: Sat, 13 Nov 2010 12:13:53 +0100
Subject: [PATCH 0578/1066] i8k: Tell gcc that *regs gets clobbered

More recent GCC caused the i8k driver to stop working, on Slackware
compiler was upgraded from gcc-4.4.4 to gcc-4.5.1 after which it didn't
work anymore, meaning the driver didn't load or gave total nonsensical
output.

As it turned out the asm(..) statement forgot to mention it modifies the
*regs variable.

Credits to Andi Kleen and Andreas Schwab for providing the fix.

Signed-off-by: Jim Bos <jim876@xs4all.nl>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/i8k.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
index 3bc0eef88717..f0863bec186f 100644
--- a/drivers/char/i8k.c
+++ b/drivers/char/i8k.c
@@ -142,7 +142,7 @@ static int i8k_smm(struct smm_regs *regs)
 		"lahf\n\t"
 		"shrl $8,%%eax\n\t"
 		"andl $1,%%eax\n"
-		:"=a"(rc)
+		:"=a"(rc), "+m" (*regs)
 		:    "a"(regs)
 		:    "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
 #else
@@ -167,7 +167,8 @@ static int i8k_smm(struct smm_regs *regs)
 	    "movl %%edx,0(%%eax)\n\t"
 	    "lahf\n\t"
 	    "shrl $8,%%eax\n\t"
-	    "andl $1,%%eax\n":"=a"(rc)
+	    "andl $1,%%eax\n"
+	    :"=a"(rc), "+m" (*regs)
 	    :    "a"(regs)
 	    :    "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
 #endif

From f8b372a11cc102b9a0dcc6ac2bd10f0b6b2755a9 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 13 Nov 2010 16:21:58 +0100
Subject: [PATCH 0579/1066] Revert "8250: Fix tcsetattr to avoid
 ioctl(TIOCMIWAIT) hang"

This reverts commit 47d3904fe40d62deee8cd46e79ca784e7a548acd.

Crashes any x86 serial console bootup:

  Console: colour VGA+ 80x25
  BUG: unable to handle kernel NULL pointer dereference at 0000000000000158
  IP: [<ffffffff811ebcb4>] serial8250_do_set_termios+0x1d4/0x430
  ...

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Greg KH <gregkh@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/8250.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index dd5e1ac22251..4d8e14b7aa93 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2343,11 +2343,8 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	/*
 	 * CTS flow control flag and modem status interrupts
-	 * Only disable MSI if no threads are waiting in
-	 * serial_core::uart_wait_modem_status
 	 */
-	if (!waitqueue_active(&up->port.state->port.delta_msr_wait))
-		up->ier &= ~UART_IER_MSI;
+	up->ier &= ~UART_IER_MSI;
 	if (!(up->bugs & UART_BUG_NOMSR) &&
 			UART_ENABLE_MS(&up->port, termios->c_cflag))
 		up->ier |= UART_IER_MSI;

From 68cee4f118c21a1c67e5764a91d766661db5b360 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@parallels.com>
Date: Thu, 28 Oct 2010 13:50:37 +0400
Subject: [PATCH 0580/1066] slub: Fix slub_lock down/up imbalance

There are two places, that do not release the slub_lock.

Respective bugs were introduced by sysfs changes ab4d5ed5 (slub: Enable
sysfs support for !CONFIG_SLUB_DEBUG) and 2bce6485 ( slub: Allow removal
of slab caches during boot).

Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
---
 mm/slub.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/mm/slub.c b/mm/slub.c
index 8fd5401bb071..981fb730aa04 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -3273,9 +3273,9 @@ struct kmem_cache *kmem_cache_create(const char *name, size_t size,
 		kfree(n);
 		kfree(s);
 	}
+err:
 	up_write(&slub_lock);
 
-err:
 	if (flags & SLAB_PANIC)
 		panic("Cannot create slabcache %s\n", name);
 	else
@@ -3862,6 +3862,7 @@ static ssize_t show_slab_objects(struct kmem_cache *s,
 			x += sprintf(buf + x, " N%d=%lu",
 					node, nodes[node]);
 #endif
+	up_read(&slub_lock);
 	kfree(nodes);
 	return x + sprintf(buf + x, "\n");
 }

From fc5fef5ef4f94c2d9ad0cc50871a3e2da5d8bc18 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 15 Nov 2010 13:25:31 +0900
Subject: [PATCH 0581/1066] MAINTAINERS: Add an fbdev git tree entry.

Now that there's an fbdev git tree (this is also what is pulled in to
-next), stub it in to the MAINTAINERS entry.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0094224ca79b..0f9f26caeb81 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2435,6 +2435,7 @@ F:	drivers/net/wan/sdla.c
 FRAMEBUFFER LAYER
 L:	linux-fbdev@vger.kernel.org
 W:	http://linux-fbdev.sourceforge.net/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git
 S:	Orphan
 F:	Documentation/fb/
 F:	drivers/video/fb*

From fba4312e223f1187efc8c083daed70e57fa9c9d3 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Sun, 14 Nov 2010 20:24:35 -0500
Subject: [PATCH 0582/1066] drm/radeon/kms: fix and unify tiled buffer
 alignment checking for r6xx/7xx

Tiled buffers have the same alignment requirements regardless of
whether the surface is for db, cb, or textures.  Previously, the
calculations where inconsistent for each buffer type.

- Unify the alignment calculations in a common function
- Standardize the alignment units (pixels for pitch/height/depth,
bytes for base)
- properly check the buffer base alignments

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/r600_cs.c | 309 +++++++++++++++++++------------
 drivers/gpu/drm/radeon/r600d.h   |   6 +
 2 files changed, 199 insertions(+), 116 deletions(-)

diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 37cc2aa9f923..0f90fc3482ce 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -50,6 +50,7 @@ struct r600_cs_track {
 	u32			nsamples;
 	u32			cb_color_base_last[8];
 	struct radeon_bo	*cb_color_bo[8];
+	u64			cb_color_bo_mc[8];
 	u32			cb_color_bo_offset[8];
 	struct radeon_bo	*cb_color_frag_bo[8];
 	struct radeon_bo	*cb_color_tile_bo[8];
@@ -67,6 +68,7 @@ struct r600_cs_track {
 	u32			db_depth_size;
 	u32			db_offset;
 	struct radeon_bo	*db_bo;
+	u64			db_bo_mc;
 };
 
 static inline int r600_bpe_from_format(u32 *bpe, u32 format)
@@ -140,6 +142,68 @@ static inline int r600_bpe_from_format(u32 *bpe, u32 format)
 	return 0;
 }
 
+struct array_mode_checker {
+	int array_mode;
+	u32 group_size;
+	u32 nbanks;
+	u32 npipes;
+	u32 nsamples;
+	u32 bpe;
+};
+
+/* returns alignment in pixels for pitch/height/depth and bytes for base */
+static inline int r600_get_array_mode_alignment(struct array_mode_checker *values,
+						u32 *pitch_align,
+						u32 *height_align,
+						u32 *depth_align,
+						u64 *base_align)
+{
+	u32 tile_width = 8;
+	u32 tile_height = 8;
+	u32 macro_tile_width = values->nbanks;
+	u32 macro_tile_height = values->npipes;
+	u32 tile_bytes = tile_width * tile_height * values->bpe * values->nsamples;
+	u32 macro_tile_bytes = macro_tile_width * macro_tile_height * tile_bytes;
+
+	switch (values->array_mode) {
+	case ARRAY_LINEAR_GENERAL:
+		/* technically tile_width/_height for pitch/height */
+		*pitch_align = 1; /* tile_width */
+		*height_align = 1; /* tile_height */
+		*depth_align = 1;
+		*base_align = 1;
+		break;
+	case ARRAY_LINEAR_ALIGNED:
+		*pitch_align = max((u32)64, (u32)(values->group_size / values->bpe));
+		*height_align = tile_height;
+		*depth_align = 1;
+		*base_align = values->group_size;
+		break;
+	case ARRAY_1D_TILED_THIN1:
+		*pitch_align = max((u32)tile_width,
+				   (u32)(values->group_size /
+					 (tile_height * values->bpe * values->nsamples)));
+		*height_align = tile_height;
+		*depth_align = 1;
+		*base_align = values->group_size;
+		break;
+	case ARRAY_2D_TILED_THIN1:
+		*pitch_align = max((u32)macro_tile_width,
+				  (u32)(((values->group_size / tile_height) /
+					 (values->bpe * values->nsamples)) *
+					values->nbanks)) * tile_width;
+		*height_align = macro_tile_height * tile_height;
+		*depth_align = 1;
+		*base_align = max(macro_tile_bytes,
+				  (*pitch_align) * values->bpe * (*height_align) * values->nsamples);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static void r600_cs_track_init(struct r600_cs_track *track)
 {
 	int i;
@@ -153,10 +217,12 @@ static void r600_cs_track_init(struct r600_cs_track *track)
 		track->cb_color_info[i] = 0;
 		track->cb_color_bo[i] = NULL;
 		track->cb_color_bo_offset[i] = 0xFFFFFFFF;
+		track->cb_color_bo_mc[i] = 0xFFFFFFFF;
 	}
 	track->cb_target_mask = 0xFFFFFFFF;
 	track->cb_shader_mask = 0xFFFFFFFF;
 	track->db_bo = NULL;
+	track->db_bo_mc = 0xFFFFFFFF;
 	/* assume the biggest format and that htile is enabled */
 	track->db_depth_info = 7 | (1 << 25);
 	track->db_depth_view = 0xFFFFC000;
@@ -168,7 +234,10 @@ static void r600_cs_track_init(struct r600_cs_track *track)
 static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
 {
 	struct r600_cs_track *track = p->track;
-	u32 bpe = 0, pitch, slice_tile_max, size, tmp, height, pitch_align;
+	u32 bpe = 0, slice_tile_max, size, tmp;
+	u32 height, height_align, pitch, pitch_align, depth_align;
+	u64 base_offset, base_align;
+	struct array_mode_checker array_check;
 	volatile u32 *ib = p->ib->ptr;
 	unsigned array_mode;
 
@@ -183,60 +252,40 @@ static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
 			i, track->cb_color_info[i]);
 		return -EINVAL;
 	}
-	/* pitch is the number of 8x8 tiles per row */
-	pitch = G_028060_PITCH_TILE_MAX(track->cb_color_size[i]) + 1;
+	/* pitch in pixels */
+	pitch = (G_028060_PITCH_TILE_MAX(track->cb_color_size[i]) + 1) * 8;
 	slice_tile_max = G_028060_SLICE_TILE_MAX(track->cb_color_size[i]) + 1;
 	slice_tile_max *= 64;
-	height = slice_tile_max / (pitch * 8);
+	height = slice_tile_max / pitch;
 	if (height > 8192)
 		height = 8192;
 	array_mode = G_0280A0_ARRAY_MODE(track->cb_color_info[i]);
+
+	base_offset = track->cb_color_bo_mc[i] + track->cb_color_bo_offset[i];
+	array_check.array_mode = array_mode;
+	array_check.group_size = track->group_size;
+	array_check.nbanks = track->nbanks;
+	array_check.npipes = track->npipes;
+	array_check.nsamples = track->nsamples;
+	array_check.bpe = bpe;
+	if (r600_get_array_mode_alignment(&array_check,
+					  &pitch_align, &height_align, &depth_align, &base_align)) {
+		dev_warn(p->dev, "%s invalid tiling %d for %d (0x%08X)\n", __func__,
+			 G_0280A0_ARRAY_MODE(track->cb_color_info[i]), i,
+			 track->cb_color_info[i]);
+		return -EINVAL;
+	}
 	switch (array_mode) {
 	case V_0280A0_ARRAY_LINEAR_GENERAL:
-		/* technically height & 0x7 */
 		break;
 	case V_0280A0_ARRAY_LINEAR_ALIGNED:
-		pitch_align = max((u32)64, (u32)(track->group_size / bpe)) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
-				 __func__, __LINE__, pitch);
-			return -EINVAL;
-		}
-		if (!IS_ALIGNED(height, 8)) {
-			dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
-				 __func__, __LINE__, height);
-			return -EINVAL;
-		}
 		break;
 	case V_0280A0_ARRAY_1D_TILED_THIN1:
-		pitch_align = max((u32)8, (u32)(track->group_size / (8 * bpe * track->nsamples))) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
-				 __func__, __LINE__, pitch);
-			return -EINVAL;
-		}
 		/* avoid breaking userspace */
 		if (height > 7)
 			height &= ~0x7;
-		if (!IS_ALIGNED(height, 8)) {
-			dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
-				 __func__, __LINE__, height);
-			return -EINVAL;
-		}
 		break;
 	case V_0280A0_ARRAY_2D_TILED_THIN1:
-		pitch_align = max((u32)track->nbanks,
-				  (u32)(((track->group_size / 8) / (bpe * track->nsamples)) * track->nbanks)) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
-				__func__, __LINE__, pitch);
-			return -EINVAL;
-		}
-		if (!IS_ALIGNED((height / 8), track->npipes)) {
-			dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
-				 __func__, __LINE__, height);
-			return -EINVAL;
-		}
 		break;
 	default:
 		dev_warn(p->dev, "%s invalid tiling %d for %d (0x%08X)\n", __func__,
@@ -244,8 +293,24 @@ static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
 			track->cb_color_info[i]);
 		return -EINVAL;
 	}
+
+	if (!IS_ALIGNED(pitch, pitch_align)) {
+		dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
+			 __func__, __LINE__, pitch);
+		return -EINVAL;
+	}
+	if (!IS_ALIGNED(height, height_align)) {
+		dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
+			 __func__, __LINE__, height);
+		return -EINVAL;
+	}
+	if (!IS_ALIGNED(base_offset, base_align)) {
+		dev_warn(p->dev, "%s offset[%d] 0x%llx not aligned\n", __func__, i, base_offset);
+		return -EINVAL;
+	}
+
 	/* check offset */
-	tmp = height * pitch * 8 * bpe;
+	tmp = height * pitch * bpe;
 	if ((tmp + track->cb_color_bo_offset[i]) > radeon_bo_size(track->cb_color_bo[i])) {
 		if (array_mode == V_0280A0_ARRAY_LINEAR_GENERAL) {
 			/* the initial DDX does bad things with the CB size occasionally */
@@ -260,15 +325,11 @@ static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
 			return -EINVAL;
 		}
 	}
-	if (!IS_ALIGNED(track->cb_color_bo_offset[i], track->group_size)) {
-		dev_warn(p->dev, "%s offset[%d] %d not aligned\n", __func__, i, track->cb_color_bo_offset[i]);
-		return -EINVAL;
-	}
 	/* limit max tile */
-	tmp = (height * pitch * 8) >> 6;
+	tmp = (height * pitch) >> 6;
 	if (tmp < slice_tile_max)
 		slice_tile_max = tmp;
-	tmp = S_028060_PITCH_TILE_MAX(pitch - 1) |
+	tmp = S_028060_PITCH_TILE_MAX((pitch / 8) - 1) |
 		S_028060_SLICE_TILE_MAX(slice_tile_max - 1);
 	ib[track->cb_color_size_idx[i]] = tmp;
 	return 0;
@@ -310,7 +371,12 @@ static int r600_cs_track_check(struct radeon_cs_parser *p)
 	/* Check depth buffer */
 	if (G_028800_STENCIL_ENABLE(track->db_depth_control) ||
 		G_028800_Z_ENABLE(track->db_depth_control)) {
-		u32 nviews, bpe, ntiles, pitch, pitch_align, height, size, slice_tile_max;
+		u32 nviews, bpe, ntiles, size, slice_tile_max;
+		u32 height, height_align, pitch, pitch_align, depth_align;
+		u64 base_offset, base_align;
+		struct array_mode_checker array_check;
+		int array_mode;
+
 		if (track->db_bo == NULL) {
 			dev_warn(p->dev, "z/stencil with no depth buffer\n");
 			return -EINVAL;
@@ -353,41 +419,34 @@ static int r600_cs_track_check(struct radeon_cs_parser *p)
 			ib[track->db_depth_size_idx] = S_028000_SLICE_TILE_MAX(tmp - 1) | (track->db_depth_size & 0x3FF);
 		} else {
 			size = radeon_bo_size(track->db_bo);
-			pitch = G_028000_PITCH_TILE_MAX(track->db_depth_size) + 1;
+			/* pitch in pixels */
+			pitch = (G_028000_PITCH_TILE_MAX(track->db_depth_size) + 1) * 8;
 			slice_tile_max = G_028000_SLICE_TILE_MAX(track->db_depth_size) + 1;
 			slice_tile_max *= 64;
-			height = slice_tile_max / (pitch * 8);
+			height = slice_tile_max / pitch;
 			if (height > 8192)
 				height = 8192;
-			switch (G_028010_ARRAY_MODE(track->db_depth_info)) {
+			base_offset = track->db_bo_mc + track->db_offset;
+			array_mode = G_028010_ARRAY_MODE(track->db_depth_info);
+			array_check.array_mode = array_mode;
+			array_check.group_size = track->group_size;
+			array_check.nbanks = track->nbanks;
+			array_check.npipes = track->npipes;
+			array_check.nsamples = track->nsamples;
+			array_check.bpe = bpe;
+			if (r600_get_array_mode_alignment(&array_check,
+							  &pitch_align, &height_align, &depth_align, &base_align)) {
+				dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__,
+					 G_028010_ARRAY_MODE(track->db_depth_info),
+					 track->db_depth_info);
+				return -EINVAL;
+			}
+			switch (array_mode) {
 			case V_028010_ARRAY_1D_TILED_THIN1:
-				pitch_align = (max((u32)8, (u32)(track->group_size / (8 * bpe))) / 8);
-				if (!IS_ALIGNED(pitch, pitch_align)) {
-					dev_warn(p->dev, "%s:%d db pitch (%d) invalid\n",
-						 __func__, __LINE__, pitch);
-					return -EINVAL;
-				}
 				/* don't break userspace */
 				height &= ~0x7;
-				if (!IS_ALIGNED(height, 8)) {
-					dev_warn(p->dev, "%s:%d db height (%d) invalid\n",
-						 __func__, __LINE__, height);
-					return -EINVAL;
-				}
 				break;
 			case V_028010_ARRAY_2D_TILED_THIN1:
-				pitch_align = max((u32)track->nbanks,
-						  (u32)(((track->group_size / 8) / bpe) * track->nbanks)) / 8;
-				if (!IS_ALIGNED(pitch, pitch_align)) {
-					dev_warn(p->dev, "%s:%d db pitch (%d) invalid\n",
-						 __func__, __LINE__, pitch);
-					return -EINVAL;
-				}
-				if (!IS_ALIGNED((height / 8), track->npipes)) {
-					dev_warn(p->dev, "%s:%d db height (%d) invalid\n",
-						 __func__, __LINE__, height);
-					return -EINVAL;
-				}
 				break;
 			default:
 				dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__,
@@ -395,15 +454,27 @@ static int r600_cs_track_check(struct radeon_cs_parser *p)
 					 track->db_depth_info);
 				return -EINVAL;
 			}
-			if (!IS_ALIGNED(track->db_offset, track->group_size)) {
-				dev_warn(p->dev, "%s offset[%d] %d not aligned\n", __func__, i, track->db_offset);
+
+			if (!IS_ALIGNED(pitch, pitch_align)) {
+				dev_warn(p->dev, "%s:%d db pitch (%d) invalid\n",
+					 __func__, __LINE__, pitch);
 				return -EINVAL;
 			}
+			if (!IS_ALIGNED(height, height_align)) {
+				dev_warn(p->dev, "%s:%d db height (%d) invalid\n",
+					 __func__, __LINE__, height);
+				return -EINVAL;
+			}
+			if (!IS_ALIGNED(base_offset, base_align)) {
+				dev_warn(p->dev, "%s offset[%d] 0x%llx not aligned\n", __func__, i, base_offset);
+				return -EINVAL;
+			}
+
 			ntiles = G_028000_SLICE_TILE_MAX(track->db_depth_size) + 1;
 			nviews = G_028004_SLICE_MAX(track->db_depth_view) + 1;
 			tmp = ntiles * bpe * 64 * nviews;
 			if ((tmp + track->db_offset) > radeon_bo_size(track->db_bo)) {
-				dev_warn(p->dev, "z/stencil buffer too small (0x%08X %d %d %d -> %d have %ld)\n",
+				dev_warn(p->dev, "z/stencil buffer too small (0x%08X %d %d %d -> %u have %lu)\n",
 						track->db_depth_size, ntiles, nviews, bpe, tmp + track->db_offset,
 						radeon_bo_size(track->db_bo));
 				return -EINVAL;
@@ -954,6 +1025,7 @@ static inline int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx
 		ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
 		track->cb_color_base_last[tmp] = ib[idx];
 		track->cb_color_bo[tmp] = reloc->robj;
+		track->cb_color_bo_mc[tmp] = reloc->lobj.gpu_offset;
 		break;
 	case DB_DEPTH_BASE:
 		r = r600_cs_packet_next_reloc(p, &reloc);
@@ -965,6 +1037,7 @@ static inline int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx
 		track->db_offset = radeon_get_ib_value(p, idx) << 8;
 		ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
 		track->db_bo = reloc->robj;
+		track->db_bo_mc = reloc->lobj.gpu_offset;
 		break;
 	case DB_HTILE_DATA_BASE:
 	case SQ_PGM_START_FS:
@@ -1086,16 +1159,25 @@ static void r600_texture_size(unsigned nfaces, unsigned blevel, unsigned nlevels
 static inline int r600_check_texture_resource(struct radeon_cs_parser *p,  u32 idx,
 					      struct radeon_bo *texture,
 					      struct radeon_bo *mipmap,
+					      u64 base_offset,
+					      u64 mip_offset,
 					      u32 tiling_flags)
 {
 	struct r600_cs_track *track = p->track;
 	u32 nfaces, nlevels, blevel, w0, h0, d0, bpe = 0;
-	u32 word0, word1, l0_size, mipmap_size, pitch, pitch_align;
+	u32 word0, word1, l0_size, mipmap_size;
+	u32 height_align, pitch, pitch_align, depth_align;
+	u64 base_align;
+	struct array_mode_checker array_check;
 
 	/* on legacy kernel we don't perform advanced check */
 	if (p->rdev == NULL)
 		return 0;
 
+	/* convert to bytes */
+	base_offset <<= 8;
+	mip_offset <<= 8;
+
 	word0 = radeon_get_ib_value(p, idx + 0);
 	if (tiling_flags & RADEON_TILING_MACRO)
 		word0 |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1);
@@ -1128,46 +1210,38 @@ static inline int r600_check_texture_resource(struct radeon_cs_parser *p,  u32 i
 		return -EINVAL;
 	}
 
-	pitch = G_038000_PITCH(word0) + 1;
-	switch (G_038000_TILE_MODE(word0)) {
-	case V_038000_ARRAY_LINEAR_GENERAL:
-		pitch_align = 1;
-		/* XXX check height align */
-		break;
-	case V_038000_ARRAY_LINEAR_ALIGNED:
-		pitch_align = max((u32)64, (u32)(track->group_size / bpe)) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
-				 __func__, __LINE__, pitch);
-			return -EINVAL;
-		}
-		/* XXX check height align */
-		break;
-	case V_038000_ARRAY_1D_TILED_THIN1:
-		pitch_align = max((u32)8, (u32)(track->group_size / (8 * bpe))) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
-				 __func__, __LINE__, pitch);
-			return -EINVAL;
-		}
-		/* XXX check height align */
-		break;
-	case V_038000_ARRAY_2D_TILED_THIN1:
-		pitch_align = max((u32)track->nbanks,
-				  (u32)(((track->group_size / 8) / bpe) * track->nbanks)) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
-				__func__, __LINE__, pitch);
-			return -EINVAL;
-		}
-		/* XXX check height align */
-		break;
-	default:
-		dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__,
-			 G_038000_TILE_MODE(word0), word0);
+	/* pitch in texels */
+	pitch = (G_038000_PITCH(word0) + 1) * 8;
+	array_check.array_mode = G_038000_TILE_MODE(word0);
+	array_check.group_size = track->group_size;
+	array_check.nbanks = track->nbanks;
+	array_check.npipes = track->npipes;
+	array_check.nsamples = 1;
+	array_check.bpe = bpe;
+	if (r600_get_array_mode_alignment(&array_check,
+					  &pitch_align, &height_align, &depth_align, &base_align)) {
+		dev_warn(p->dev, "%s:%d tex array mode (%d) invalid\n",
+			 __func__, __LINE__, G_038000_TILE_MODE(word0));
+		return -EINVAL;
+	}
+
+	/* XXX check height as well... */
+
+	if (!IS_ALIGNED(pitch, pitch_align)) {
+		dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
+			 __func__, __LINE__, pitch);
+		return -EINVAL;
+	}
+	if (!IS_ALIGNED(base_offset, base_align)) {
+		dev_warn(p->dev, "%s:%d tex base offset (0x%llx) invalid\n",
+			 __func__, __LINE__, base_offset);
+		return -EINVAL;
+	}
+	if (!IS_ALIGNED(mip_offset, base_align)) {
+		dev_warn(p->dev, "%s:%d tex mip offset (0x%llx) invalid\n",
+			 __func__, __LINE__, mip_offset);
 		return -EINVAL;
 	}
-	/* XXX check offset align */
 
 	word0 = radeon_get_ib_value(p, idx + 4);
 	word1 = radeon_get_ib_value(p, idx + 5);
@@ -1402,7 +1476,10 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 				mip_offset = (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
 				mipmap = reloc->robj;
 				r = r600_check_texture_resource(p,  idx+(i*7)+1,
-								texture, mipmap, reloc->lobj.tiling_flags);
+								texture, mipmap,
+								base_offset + radeon_get_ib_value(p, idx+1+(i*7)+2),
+								mip_offset + radeon_get_ib_value(p, idx+1+(i*7)+3),
+								reloc->lobj.tiling_flags);
 				if (r)
 					return r;
 				ib[idx+1+(i*7)+2] += base_offset;
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index 966a793e225b..bff4dc4f410f 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -51,6 +51,12 @@
 #define PTE_READABLE				(1 << 5)
 #define PTE_WRITEABLE				(1 << 6)
 
+/* tiling bits */
+#define     ARRAY_LINEAR_GENERAL              0x00000000
+#define     ARRAY_LINEAR_ALIGNED              0x00000001
+#define     ARRAY_1D_TILED_THIN1              0x00000002
+#define     ARRAY_2D_TILED_THIN1              0x00000004
+
 /* Registers */
 #define	ARB_POP						0x2418
 #define 	ENABLE_TC128					(1 << 30)

From a41c73e04673b47730df682446f0d52f95e32a5b Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segoon@openwall.com>
Date: Sun, 14 Nov 2010 23:08:27 +0300
Subject: [PATCH 0583/1066] drm: radeon: fix error value sign

enable_vblank implementations should use negative result to indicate error.
radeon_enable_vblank() returns EINVAL in this case.  Change this to -EINVAL.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_irq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c
index 2f349a300195..465746bd51b7 100644
--- a/drivers/gpu/drm/radeon/radeon_irq.c
+++ b/drivers/gpu/drm/radeon/radeon_irq.c
@@ -76,7 +76,7 @@ int radeon_enable_vblank(struct drm_device *dev, int crtc)
 		default:
 			DRM_ERROR("tried to enable vblank on non-existent crtc %d\n",
 				  crtc);
-			return EINVAL;
+			return -EINVAL;
 		}
 	} else {
 		switch (crtc) {
@@ -89,7 +89,7 @@ int radeon_enable_vblank(struct drm_device *dev, int crtc)
 		default:
 			DRM_ERROR("tried to enable vblank on non-existent crtc %d\n",
 				  crtc);
-			return EINVAL;
+			return -EINVAL;
 		}
 	}
 

From dce1431cb36338bda1167591689ab1f77ccf8934 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Sat, 13 Nov 2010 02:06:27 -0500
Subject: [PATCH 0584/1066] fsl-diu-fb: drop dead ioctl define

The fsl-diu-fb driver no longer uses this define, and we have a common one
to cover this already (FBIO_WAITFORVSYNC).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 include/linux/fsl-diu-fb.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/include/linux/fsl-diu-fb.h b/include/linux/fsl-diu-fb.h
index fc295d7ea463..781d4671415f 100644
--- a/include/linux/fsl-diu-fb.h
+++ b/include/linux/fsl-diu-fb.h
@@ -54,7 +54,6 @@ struct aoi_display_offset {
 };
 
 #define MFB_SET_CHROMA_KEY	_IOW('M', 1, struct mfb_chroma_key)
-#define MFB_WAIT_FOR_VSYNC	_IOW('F', 0x20, u_int32_t)
 #define MFB_SET_BRIGHTNESS	_IOW('M', 3, __u8)
 
 #define MFB_SET_ALPHA		0x80014d00

From 6318af900ca7cb2c94b27d3c358762e6ac187e25 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 15 Nov 2010 14:30:30 +0900
Subject: [PATCH 0585/1066] sh: intc: Fix up build failure introduced by radix
 tree changes.

The radix tree retry logic got a bit of an overhaul and subsequently
broke the virtual IRQ subgroup build. Simply switch over to
radix_tree_deref_retry() as per the filemap changes, which the virq
lookup logic was modelled after in the first place.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/sh/intc/virq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/sh/intc/virq.c b/drivers/sh/intc/virq.c
index e5bf5d3c698e..4e0ff7181164 100644
--- a/drivers/sh/intc/virq.c
+++ b/drivers/sh/intc/virq.c
@@ -215,7 +215,7 @@ restart:
 		entry = radix_tree_deref_slot((void **)entries[i]);
 		if (unlikely(!entry))
 			continue;
-		if (unlikely(entry == RADIX_TREE_RETRY))
+		if (radix_tree_deref_retry(entry))
 			goto restart;
 
 		irq = create_irq();

From 574490e30a2a07cd7bc7ee7f63f1e61375a0359b Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Mon, 15 Nov 2010 03:11:09 +0000
Subject: [PATCH 0586/1066] ARM: mach-shmobile: ap4evb: add fsib 44100Hz rate

Tested-by: Tony SIM <chinyeow.sim.xt@renesas.com>
Tested-by: TAKEI Mitsuharu <takei.andr@gmail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ap4evb.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 63c2fcac8e1e..d3260542b943 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -583,6 +583,10 @@ static int fsi_set_rate(int is_porta, int rate)
 		return -EINVAL;
 
 	switch (rate) {
+	case 44100:
+		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
+		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		break;
 	case 48000:
 		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
 		clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));

From 1b346af2f88a0e19e718a843d39d34e41e5527e1 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 16 Aug 2010 08:03:04 +0200
Subject: [PATCH 0587/1066] ARM mx3fb: check for DMA engine type

We have two dma engines in MX3 systems: The IPU and the SDMA
engine. We have to check if we got a channel from the correct
engine before proceeding with a channel.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
 drivers/video/mx3fb.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 7cfc170bce19..ca0f6be9d12e 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 
+#include <mach/dma.h>
 #include <mach/hardware.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
@@ -1420,6 +1421,9 @@ static bool chan_filter(struct dma_chan *chan, void *arg)
 	struct device *dev;
 	struct mx3fb_platform_data *mx3fb_pdata;
 
+	if (!imx_dma_is_ipu(chan))
+		return false;
+
 	if (!rq)
 		return false;
 

From 415d34195b3c0c26544034d37b8766dfffd36bcf Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Nov 2010 15:43:11 +0100
Subject: [PATCH 0588/1066] ARM i.MX: sdma is merged, so remove #ifdef
 SDMA_IS_MERGED

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/devices/platform-imx-dma.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c
index 02d989018059..3a705c7877dd 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-dma.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c
@@ -12,15 +12,7 @@
 
 #include <mach/hardware.h>
 #include <mach/devices-common.h>
-#ifdef SDMA_IS_MERGED
 #include <mach/sdma.h>
-#else
-struct sdma_platform_data {
-	int sdma_version;
-	char *cpu_name;
-	int to_version;
-};
-#endif
 
 struct imx_imx_sdma_data {
 	resource_size_t iobase;

From 8cad8fa1d716b16aa22d5c670ead2b952e1e59b9 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 9 Aug 2010 09:45:09 +0200
Subject: [PATCH 0589/1066] ARM i.MX pcm037 eet: compile fixes

The pcm037 eet extension currently does not compile if
SPI_IMX is enabled. Fix it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mach-pcm037_eet.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 3392812a55f7..fda56545d2fd 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -14,6 +14,7 @@
 
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
+#include <mach/spi.h>
 
 #include <asm/mach-types.h>
 
@@ -59,14 +60,12 @@ static struct spi_board_info pcm037_spi_dev[] = {
 };
 
 /* Platform Data for MXC CSPI */
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
 
 static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
 	.chipselect = pcm037_spi1_cs,
 	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
 };
-#endif
 
 /* GPIO-keys input device */
 static struct gpio_keys_button pcm037_gpio_keys[] = {

From 3530b417f457627432cff1dfd8db659042d66695 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Nov 2010 23:08:59 +0100
Subject: [PATCH 0590/1066] ARM i.MX spi: fix compilation for i.MX21
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/plat-mxc/devices/platform-spi_imx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
index e48340ec331e..17f724c9452d 100644
--- a/arch/arm/plat-mxc/devices/platform-spi_imx.c
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -27,6 +27,7 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
 	imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
 	imx21_cspi_data_entry(0, 1),
 	imx21_cspi_data_entry(1, 2),
+};
 #endif
 
 #ifdef CONFIG_ARCH_MX25

From 6f5ae900957b73f5d18c70ad69662ca604ff77e1 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Nov 2010 21:27:05 +0100
Subject: [PATCH 0591/1066] ARM i.MX27 eukrea: Fix compilation

Currently compilation breaks for the eukrea mbimx27 baseboard
when CONFIG_SPI_IMX is selected and CONFIG_TOUCHSCREEN_ADS7846
is not selected. Fix this by removing the ifdefs altogether.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Eric Benard <eric@eukrea.com>
---
 arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 026263c665ca..7e1e9dc2c8fc 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -250,9 +250,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
-	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
 #define ADS7846_PENDOWN (GPIO_PORTD | 25)
 
 static void ads7846_dev_init(void)
@@ -273,9 +270,7 @@ static struct ads7846_platform_data ads7846_config __initdata = {
 	.get_pendown_state	= ads7846_get_pendown_state,
 	.keep_vref_on		= 1,
 };
-#endif
 
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
 	[0] = {
 		.modalias	= "ads7846",
@@ -294,7 +289,6 @@ static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
 	.chipselect	= eukrea_mbimx27_spi_cs,
 	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
 };
-#endif
 
 static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
 	{

From 46e3f3075931493f65e9561ef57bcc23fe077a13 Mon Sep 17 00:00:00 2001
From: Baruch Siach <baruch@tkos.co.il>
Date: Tue, 9 Nov 2010 08:47:54 +0200
Subject: [PATCH 0592/1066] mx25: fix spi device registration typo
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commit 35bab0589b9a71533b37280eefa430c21dc102fe (ARM: imx: change the way
spi-imx devices are registered) contained a typo in mx25, leading to link time
failure.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-mx25/devices-imx25.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h
index 93afa10b13cf..d94d282fa676 100644
--- a/arch/arm/mach-mx25/devices-imx25.h
+++ b/arch/arm/mach-mx25/devices-imx25.h
@@ -42,9 +42,9 @@ extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
 #define imx25_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
 
-extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst;
+extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst;
 #define imx25_add_spi_imx(id, pdata)	\
-	imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
+	imx_add_spi_imx(&imx25_cspi_data[id], pdata)
 #define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
 #define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
 #define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)

From d69b78ba1deaaa95ffa8dac5a9ca819ce454d52e Mon Sep 17 00:00:00 2001
From: Greg Thelen <gthelen@google.com>
Date: Mon, 15 Nov 2010 10:20:52 +0100
Subject: [PATCH 0593/1066] ioprio: grab rcu_read_lock in
 sys_ioprio_{set,get}()

Using:
- CONFIG_LOCKUP_DETECTOR=y
- CONFIG_PREEMPT=y
- CONFIG_LOCKDEP=y
- CONFIG_PROVE_LOCKING=y
- CONFIG_PROVE_RCU=y
found a missing rcu lock during boot on a 512 MiB x86_64 ubuntu vm:
  ===================================================
  [ INFO: suspicious rcu_dereference_check() usage. ]
  ---------------------------------------------------
  kernel/pid.c:419 invoked rcu_dereference_check() without protection!

  other info that might help us debug this:

  rcu_scheduler_active = 1, debug_locks = 0
  1 lock held by ureadahead/1355:
   #0:  (tasklist_lock){.+.+..}, at: [<ffffffff8115bc09>] sys_ioprio_set+0x7f/0x29e

  stack backtrace:
  Pid: 1355, comm: ureadahead Not tainted 2.6.37-dbg-DEV #1
  Call Trace:
   [<ffffffff8109c10c>] lockdep_rcu_dereference+0xaa/0xb3
   [<ffffffff81088cbf>] find_task_by_pid_ns+0x44/0x5d
   [<ffffffff81088cfa>] find_task_by_vpid+0x22/0x24
   [<ffffffff8115bc3e>] sys_ioprio_set+0xb4/0x29e
   [<ffffffff8147cf21>] ? trace_hardirqs_off_thunk+0x3a/0x3c
   [<ffffffff8105c409>] sysenter_dispatch+0x7/0x2c
   [<ffffffff8147cee2>] ? trace_hardirqs_on_thunk+0x3a/0x3f

The fix is to:
a) grab rcu lock in sys_ioprio_{set,get}() and
b) avoid grabbing tasklist_lock.
Discussion in: http://marc.info/?l=linux-kernel&m=128951324702889

Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>

Modified by Jens to remove the now redundant inner rcu lock and
unlock since they are now protected by the outer lock.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 fs/ioprio.c | 31 ++++++-------------------------
 1 file changed, 6 insertions(+), 25 deletions(-)

diff --git a/fs/ioprio.c b/fs/ioprio.c
index 2f7d05c89922..7da2a06508e5 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -103,22 +103,15 @@ SYSCALL_DEFINE3(ioprio_set, int, which, int, who, int, ioprio)
 	}
 
 	ret = -ESRCH;
-	/*
-	 * We want IOPRIO_WHO_PGRP/IOPRIO_WHO_USER to be "atomic",
-	 * so we can't use rcu_read_lock(). See re-copy of ->ioprio
-	 * in copy_process().
-	 */
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 	switch (which) {
 		case IOPRIO_WHO_PROCESS:
-			rcu_read_lock();
 			if (!who)
 				p = current;
 			else
 				p = find_task_by_vpid(who);
 			if (p)
 				ret = set_task_ioprio(p, ioprio);
-			rcu_read_unlock();
 			break;
 		case IOPRIO_WHO_PGRP:
 			if (!who)
@@ -141,12 +134,7 @@ SYSCALL_DEFINE3(ioprio_set, int, which, int, who, int, ioprio)
 				break;
 
 			do_each_thread(g, p) {
-				int match;
-
-				rcu_read_lock();
-				match = __task_cred(p)->uid == who;
-				rcu_read_unlock();
-				if (!match)
+				if (__task_cred(p)->uid != who)
 					continue;
 				ret = set_task_ioprio(p, ioprio);
 				if (ret)
@@ -160,7 +148,7 @@ free_uid:
 			ret = -EINVAL;
 	}
 
-	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
 	return ret;
 }
 
@@ -204,17 +192,15 @@ SYSCALL_DEFINE2(ioprio_get, int, which, int, who)
 	int ret = -ESRCH;
 	int tmpio;
 
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 	switch (which) {
 		case IOPRIO_WHO_PROCESS:
-			rcu_read_lock();
 			if (!who)
 				p = current;
 			else
 				p = find_task_by_vpid(who);
 			if (p)
 				ret = get_task_ioprio(p);
-			rcu_read_unlock();
 			break;
 		case IOPRIO_WHO_PGRP:
 			if (!who)
@@ -241,12 +227,7 @@ SYSCALL_DEFINE2(ioprio_get, int, which, int, who)
 				break;
 
 			do_each_thread(g, p) {
-				int match;
-
-				rcu_read_lock();
-				match = __task_cred(p)->uid == user->uid;
-				rcu_read_unlock();
-				if (!match)
+				if (__task_cred(p)->uid != user->uid)
 					continue;
 				tmpio = get_task_ioprio(p);
 				if (tmpio < 0)
@@ -264,6 +245,6 @@ SYSCALL_DEFINE2(ioprio_get, int, which, int, who)
 			ret = -EINVAL;
 	}
 
-	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
 	return ret;
 }

From 9a1683d1dd14d6ed35d2884c6b79ff12fc6bef39 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 15 Nov 2010 18:14:43 +0900
Subject: [PATCH 0594/1066] sh: clkfwk: Kill off unused clk_set_rate_ex().

With the refactoring of the SH7722 clock framework some time ago this
abstraction has become unecessary. Kill it off before anyone else gets
the bright idea to start using it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 Documentation/DocBook/sh.tmpl |  4 ----
 Documentation/sh/clk.txt      | 32 --------------------------------
 drivers/sh/clk/core.c         | 12 +++---------
 include/linux/sh_clk.h        | 30 ------------------------------
 4 files changed, 3 insertions(+), 75 deletions(-)
 delete mode 100644 Documentation/sh/clk.txt

diff --git a/Documentation/DocBook/sh.tmpl b/Documentation/DocBook/sh.tmpl
index d858d92cf6d9..4a38f604fa66 100644
--- a/Documentation/DocBook/sh.tmpl
+++ b/Documentation/DocBook/sh.tmpl
@@ -79,10 +79,6 @@
       </sect2>
     </sect1>
   </chapter>
-  <chapter id="clk">
-    <title>Clock Framework Extensions</title>
-!Iinclude/linux/sh_clk.h
-  </chapter>
   <chapter id="mach">
     <title>Machine Specific Interfaces</title>
     <sect1 id="dreamcast">
diff --git a/Documentation/sh/clk.txt b/Documentation/sh/clk.txt
deleted file mode 100644
index 114b595cfa97..000000000000
--- a/Documentation/sh/clk.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Clock framework on SuperH architecture
-
-The framework on SH extends existing API by the function clk_set_rate_ex,
-which prototype is as follows:
-
-    clk_set_rate_ex (struct clk *clk, unsigned long rate, int algo_id)
-
-The algo_id parameter is used to specify algorithm used to recalculate clocks,
-adjanced to clock, specified as first argument. It is assumed that algo_id==0
-means no changes to adjanced clock
-
-Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method,
-if it is present in ops structure. The method should set the clock rate and adjust
-all needed clocks according to the passed algo_id.
-Exact values for algo_id are machine-dependent. For the sh7722, the following
-values are defined:
-
-	NO_CHANGE	= 0,
-	IUS_N1_N1,	/* I:U = N:1, U:Sh = N:1 */
-	IUS_322,	/* I:U:Sh = 3:2:2	 */
-	IUS_522,	/* I:U:Sh = 5:2:2 	 */
-	IUS_N11,	/* I:U:Sh = N:1:1	 */
-	SB_N1,		/* Sh:B = N:1		 */
-	SB3_N1,		/* Sh:B3 = N:1		 */
-	SB3_32,		/* Sh:B3 = 3:2		 */
-	SB3_43,		/* Sh:B3 = 4:3		 */
-	SB3_54,		/* Sh:B3 = 5:4		 */
-	BP_N1,		/* B:P	 = N:1		 */
-	IP_N1		/* I:P	 = N:1		 */
-
-Each of these constants means relation between clocks that can be set via the FRQCR
-register
diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
index cb12a8e1466b..69be6bb92323 100644
--- a/drivers/sh/clk/core.c
+++ b/drivers/sh/clk/core.c
@@ -454,12 +454,6 @@ unsigned long clk_get_rate(struct clk *clk)
 EXPORT_SYMBOL_GPL(clk_get_rate);
 
 int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	return clk_set_rate_ex(clk, rate, 0);
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id)
 {
 	int ret = -EOPNOTSUPP;
 	unsigned long flags;
@@ -467,7 +461,7 @@ int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id)
 	spin_lock_irqsave(&clock_lock, flags);
 
 	if (likely(clk->ops && clk->ops->set_rate)) {
-		ret = clk->ops->set_rate(clk, rate, algo_id);
+		ret = clk->ops->set_rate(clk, rate, 0);
 		if (ret != 0)
 			goto out_unlock;
 	} else {
@@ -485,7 +479,7 @@ out_unlock:
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(clk_set_rate_ex);
+EXPORT_SYMBOL_GPL(clk_set_rate);
 
 int clk_set_parent(struct clk *clk, struct clk *parent)
 {
@@ -654,7 +648,7 @@ static int clks_sysdev_suspend(struct sys_device *dev, pm_message_t state)
 						clkp->parent);
 				if (likely(clkp->ops->set_rate))
 					clkp->ops->set_rate(clkp,
-						rate, NO_CHANGE);
+						rate, 0);
 				else if (likely(clkp->ops->recalc))
 					clkp->rate = clkp->ops->recalc(clkp);
 			}
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index cea0c38e7a63..30885d928801 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -67,36 +67,6 @@ int clk_register(struct clk *);
 void clk_unregister(struct clk *);
 void clk_enable_init_clocks(void);
 
-/**
- * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
- * @clk: clock source
- * @rate: desired clock rate in Hz
- * @algo_id: algorithm id to be passed down to ops->set_rate
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
-
-enum clk_sh_algo_id {
-	NO_CHANGE = 0,
-
-	IUS_N1_N1,
-	IUS_322,
-	IUS_522,
-	IUS_N11,
-
-	SB_N1,
-
-	SB3_N1,
-	SB3_32,
-	SB3_43,
-	SB3_54,
-
-	BP_N1,
-
-	IP_N1,
-};
-
 struct clk_div_mult_table {
 	unsigned int *divisors;
 	unsigned int nr_divisors;

From 35a96c739fd7624b8edff990a74b86b5a85342da Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 15 Nov 2010 18:18:32 +0900
Subject: [PATCH 0595/1066] sh: clkfwk: Kill off now unused algo_id in set_rate
 op.

Now that clk_set_rate_ex() is gone, there is also no way to get at rate
setting algo id, which is now also completely unused. Kill it off before
new clock ops start using it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/clock-sh7372.c  | 6 ++----
 arch/sh/kernel/cpu/sh4/clock-sh4-202.c | 2 +-
 drivers/sh/clk/core.c                  | 5 ++---
 drivers/sh/clk/cpg.c                   | 5 ++---
 include/linux/sh_clk.h                 | 2 +-
 5 files changed, 8 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 7db31e6c6bf2..b25ce90a346e 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -220,8 +220,7 @@ static void pllc2_disable(struct clk *clk)
 	__raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR);
 }
 
-static int pllc2_set_rate(struct clk *clk,
-			  unsigned long rate, int algo_id)
+static int pllc2_set_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned long value;
 	int idx;
@@ -463,8 +462,7 @@ static int fsidiv_enable(struct clk *clk)
 	return 0;
 }
 
-static int fsidiv_set_rate(struct clk *clk,
-			   unsigned long rate, int algo_id)
+static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
 {
 	int idx;
 
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
index 4eabc68cd753..b601fa3978d1 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@@ -110,7 +110,7 @@ static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static int shoc_clk_set_rate(struct clk *clk, unsigned long rate, int algo_id)
+static int shoc_clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned long frqcr3;
 	unsigned int tmp;
diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
index 69be6bb92323..87743e7d4d42 100644
--- a/drivers/sh/clk/core.c
+++ b/drivers/sh/clk/core.c
@@ -461,7 +461,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	spin_lock_irqsave(&clock_lock, flags);
 
 	if (likely(clk->ops && clk->ops->set_rate)) {
-		ret = clk->ops->set_rate(clk, rate, 0);
+		ret = clk->ops->set_rate(clk, rate);
 		if (ret != 0)
 			goto out_unlock;
 	} else {
@@ -647,8 +647,7 @@ static int clks_sysdev_suspend(struct sys_device *dev, pm_message_t state)
 					clkp->ops->set_parent(clkp,
 						clkp->parent);
 				if (likely(clkp->ops->set_rate))
-					clkp->ops->set_rate(clkp,
-						rate, 0);
+					clkp->ops->set_rate(clkp, rate);
 				else if (likely(clkp->ops->recalc))
 					clkp->rate = clkp->ops->recalc(clkp);
 			}
diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
index 3aea5f0ceb09..359e9a322c7b 100644
--- a/drivers/sh/clk/cpg.c
+++ b/drivers/sh/clk/cpg.c
@@ -110,8 +110,7 @@ static int sh_clk_div6_set_parent(struct clk *clk, struct clk *parent)
 	return 0;
 }
 
-static int sh_clk_div6_set_rate(struct clk *clk,
-				unsigned long rate, int algo_id)
+static int sh_clk_div6_set_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned long value;
 	int idx;
@@ -253,7 +252,7 @@ static int sh_clk_div4_set_parent(struct clk *clk, struct clk *parent)
 	return 0;
 }
 
-static int sh_clk_div4_set_rate(struct clk *clk, unsigned long rate, int algo_id)
+static int sh_clk_div4_set_rate(struct clk *clk, unsigned long rate)
 {
 	struct clk_div4_table *d4t = clk->priv;
 	unsigned long value;
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index 30885d928801..038475a2092f 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -23,7 +23,7 @@ struct clk_ops {
 	int (*enable)(struct clk *clk);
 	void (*disable)(struct clk *clk);
 	unsigned long (*recalc)(struct clk *clk);
-	int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
+	int (*set_rate)(struct clk *clk, unsigned long rate);
 	int (*set_parent)(struct clk *clk, struct clk *parent);
 	long (*round_rate)(struct clk *clk, unsigned long rate);
 };

From fcb7193096969ca9e5b9219b9a99ddf299d4054f Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Mon, 15 Nov 2010 00:23:42 -0800
Subject: [PATCH 0596/1066] Input: sysrq - pass along lone Alt + SysRq

When user presses and releases Alt + SysRq without pressing any of the
hot keys re-inject the combination and pass it on to userspace instead
of suppressing it - maybe he or she wanted to take print screen
instead of invoking SysRq handler.

Also pass along release events for keys that have been pressed before
SysRq mode has been invoked so that keys do not appear to be "stuck".

Acked-by: Jason Wessel <jason.wessel@windriver.com>
Tested-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/char/sysrq.c | 175 +++++++++++++++++++++++++++++++------------
 1 file changed, 127 insertions(+), 48 deletions(-)

diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index eaa5d3efa79d..c556ed9db13d 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -554,7 +554,7 @@ EXPORT_SYMBOL(handle_sysrq);
 #ifdef CONFIG_INPUT
 
 /* Simple translation table for the SysRq keys */
-static const unsigned char sysrq_xlate[KEY_MAX + 1] =
+static const unsigned char sysrq_xlate[KEY_CNT] =
         "\000\0331234567890-=\177\t"                    /* 0x00 - 0x0f */
         "qwertyuiop[]\r\000as"                          /* 0x10 - 0x1f */
         "dfghjkl;'`\000\\zxcv"                          /* 0x20 - 0x2f */
@@ -563,53 +563,129 @@ static const unsigned char sysrq_xlate[KEY_MAX + 1] =
         "230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */
         "\r\000/";                                      /* 0x60 - 0x6f */
 
-static bool sysrq_down;
-static int sysrq_alt_use;
-static int sysrq_alt;
-static DEFINE_SPINLOCK(sysrq_event_lock);
+struct sysrq_state {
+	struct input_handle handle;
+	struct work_struct reinject_work;
+	unsigned long key_down[BITS_TO_LONGS(KEY_CNT)];
+	unsigned int alt;
+	unsigned int alt_use;
+	bool active;
+	bool need_reinject;
+};
 
-static bool sysrq_filter(struct input_handle *handle, unsigned int type,
-		         unsigned int code, int value)
+static void sysrq_reinject_alt_sysrq(struct work_struct *work)
 {
+	struct sysrq_state *sysrq =
+			container_of(work, struct sysrq_state, reinject_work);
+	struct input_handle *handle = &sysrq->handle;
+	unsigned int alt_code = sysrq->alt_use;
+
+	if (sysrq->need_reinject) {
+		/* Simulate press and release of Alt + SysRq */
+		input_inject_event(handle, EV_KEY, alt_code, 1);
+		input_inject_event(handle, EV_KEY, KEY_SYSRQ, 1);
+		input_inject_event(handle, EV_SYN, SYN_REPORT, 1);
+
+		input_inject_event(handle, EV_KEY, KEY_SYSRQ, 0);
+		input_inject_event(handle, EV_KEY, alt_code, 0);
+		input_inject_event(handle, EV_SYN, SYN_REPORT, 1);
+	}
+}
+
+static bool sysrq_filter(struct input_handle *handle,
+			 unsigned int type, unsigned int code, int value)
+{
+	struct sysrq_state *sysrq = handle->private;
+	bool was_active = sysrq->active;
 	bool suppress;
 
-	/* We are called with interrupts disabled, just take the lock */
-	spin_lock(&sysrq_event_lock);
+	switch (type) {
 
-	if (type != EV_KEY)
-		goto out;
-
-	switch (code) {
-
-	case KEY_LEFTALT:
-	case KEY_RIGHTALT:
-		if (value)
-			sysrq_alt = code;
-		else {
-			if (sysrq_down && code == sysrq_alt_use)
-				sysrq_down = false;
-
-			sysrq_alt = 0;
-		}
+	case EV_SYN:
+		suppress = false;
 		break;
 
-	case KEY_SYSRQ:
-		if (value == 1 && sysrq_alt) {
-			sysrq_down = true;
-			sysrq_alt_use = sysrq_alt;
+	case EV_KEY:
+		switch (code) {
+
+		case KEY_LEFTALT:
+		case KEY_RIGHTALT:
+			if (!value) {
+				/* One of ALTs is being released */
+				if (sysrq->active && code == sysrq->alt_use)
+					sysrq->active = false;
+
+				sysrq->alt = KEY_RESERVED;
+
+			} else if (value != 2) {
+				sysrq->alt = code;
+				sysrq->need_reinject = false;
+			}
+			break;
+
+		case KEY_SYSRQ:
+			if (value == 1 && sysrq->alt != KEY_RESERVED) {
+				sysrq->active = true;
+				sysrq->alt_use = sysrq->alt;
+				/*
+				 * If nothing else will be pressed we'll need
+				 * to * re-inject Alt-SysRq keysroke.
+				 */
+				sysrq->need_reinject = true;
+			}
+
+			/*
+			 * Pretend that sysrq was never pressed at all. This
+			 * is needed to properly handle KGDB which will try
+			 * to release all keys after exiting debugger. If we
+			 * do not clear key bit it KGDB will end up sending
+			 * release events for Alt and SysRq, potentially
+			 * triggering print screen function.
+			 */
+			if (sysrq->active)
+				clear_bit(KEY_SYSRQ, handle->dev->key);
+
+			break;
+
+		default:
+			if (sysrq->active && value && value != 2) {
+				sysrq->need_reinject = false;
+				__handle_sysrq(sysrq_xlate[code], true);
+			}
+			break;
+		}
+
+		suppress = sysrq->active;
+
+		if (!sysrq->active) {
+			/*
+			 * If we are not suppressing key presses keep track of
+			 * keyboard state so we can release keys that have been
+			 * pressed before entering SysRq mode.
+			 */
+			if (value)
+				set_bit(code, sysrq->key_down);
+			else
+				clear_bit(code, sysrq->key_down);
+
+			if (was_active)
+				schedule_work(&sysrq->reinject_work);
+
+		} else if (value == 0 &&
+			   test_and_clear_bit(code, sysrq->key_down)) {
+			/*
+			 * Pass on release events for keys that was pressed before
+			 * entering SysRq mode.
+			 */
+			suppress = false;
 		}
 		break;
 
 	default:
-		if (sysrq_down && value && value != 2)
-			__handle_sysrq(sysrq_xlate[code], true);
+		suppress = sysrq->active;
 		break;
 	}
 
-out:
-	suppress = sysrq_down;
-	spin_unlock(&sysrq_event_lock);
-
 	return suppress;
 }
 
@@ -617,28 +693,28 @@ static int sysrq_connect(struct input_handler *handler,
 			 struct input_dev *dev,
 			 const struct input_device_id *id)
 {
-	struct input_handle *handle;
+	struct sysrq_state *sysrq;
 	int error;
 
-	sysrq_down = false;
-	sysrq_alt = 0;
-
-	handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL);
-	if (!handle)
+	sysrq = kzalloc(sizeof(struct sysrq_state), GFP_KERNEL);
+	if (!sysrq)
 		return -ENOMEM;
 
-	handle->dev = dev;
-	handle->handler = handler;
-	handle->name = "sysrq";
+	INIT_WORK(&sysrq->reinject_work, sysrq_reinject_alt_sysrq);
 
-	error = input_register_handle(handle);
+	sysrq->handle.dev = dev;
+	sysrq->handle.handler = handler;
+	sysrq->handle.name = "sysrq";
+	sysrq->handle.private = sysrq;
+
+	error = input_register_handle(&sysrq->handle);
 	if (error) {
 		pr_err("Failed to register input sysrq handler, error %d\n",
 			error);
 		goto err_free;
 	}
 
-	error = input_open_device(handle);
+	error = input_open_device(&sysrq->handle);
 	if (error) {
 		pr_err("Failed to open input device, error %d\n", error);
 		goto err_unregister;
@@ -647,17 +723,20 @@ static int sysrq_connect(struct input_handler *handler,
 	return 0;
 
  err_unregister:
-	input_unregister_handle(handle);
+	input_unregister_handle(&sysrq->handle);
  err_free:
-	kfree(handle);
+	kfree(sysrq);
 	return error;
 }
 
 static void sysrq_disconnect(struct input_handle *handle)
 {
+	struct sysrq_state *sysrq = handle->private;
+
 	input_close_device(handle);
+	cancel_work_sync(&sysrq->reinject_work);
 	input_unregister_handle(handle);
-	kfree(handle);
+	kfree(sysrq);
 }
 
 /*

From 549015c36baadc6e67861bba6e927259e34c4d59 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 15 Nov 2010 18:48:25 +0900
Subject: [PATCH 0597/1066] sh: clkfwk: Disable init clk op for non-legacy
 clocks.

Presently it's only legacy users that are using this clock op, guard it
with an ifdef to ensure that no new users start using it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 include/linux/sh_clk.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index 038475a2092f..9a52f72527dc 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -19,7 +19,9 @@ struct clk_mapping {
 };
 
 struct clk_ops {
+#ifdef CONFIG_SH_CLK_CPG_LEGACY
 	void (*init)(struct clk *clk);
+#endif
 	int (*enable)(struct clk *clk);
 	void (*disable)(struct clk *clk);
 	unsigned long (*recalc)(struct clk *clk);

From ccb3b84fa0fb6fb7b46b461881fd60440f579696 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Sat, 13 Nov 2010 14:53:41 +0200
Subject: [PATCH 0598/1066] ASoC: RX1950: Fix hw_params function

Unfortunatelly, I misunderstood datasheet, and on s3c244x-iis
when MPLLin source for master clock is selected, prescaler has
no effect. Remove dividor calculation for 44100 rate; remove 88200
rate at all, rx1950 can't do it.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/s3c24xx/rx1950_uda1380.c | 20 +++-----------------
 1 file changed, 3 insertions(+), 17 deletions(-)

diff --git a/sound/soc/s3c24xx/rx1950_uda1380.c b/sound/soc/s3c24xx/rx1950_uda1380.c
index ffd5cf2fb0a9..468cc11fdf47 100644
--- a/sound/soc/s3c24xx/rx1950_uda1380.c
+++ b/sound/soc/s3c24xx/rx1950_uda1380.c
@@ -50,7 +50,6 @@ static unsigned int rates[] = {
 	16000,
 	44100,
 	48000,
-	88200,
 };
 
 static struct snd_pcm_hw_constraint_list hw_rates = {
@@ -130,7 +129,6 @@ static const struct snd_soc_dapm_route audio_map[] = {
 };
 
 static struct platform_device *s3c24xx_snd_device;
-static struct clk *xtal;
 
 static int rx1950_startup(struct snd_pcm_substream *substream)
 {
@@ -179,10 +177,8 @@ static int rx1950_hw_params(struct snd_pcm_substream *substream,
 	case 44100:
 	case 88200:
 		clk_source = S3C24XX_CLKSRC_MPLL;
-		fs_mode = S3C2410_IISMOD_256FS;
-		div = clk_get_rate(xtal) / (256 * rate);
-		if (clk_get_rate(xtal) % (256 * rate) > (128 * rate))
-			div++;
+		fs_mode = S3C2410_IISMOD_384FS;
+		div = 1;
 		break;
 	default:
 		printk(KERN_ERR "%s: rate %d is not supported\n",
@@ -210,7 +206,7 @@ static int rx1950_hw_params(struct snd_pcm_substream *substream,
 
 	/* set MCLK division for sample rate */
 	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
-		S3C2410_IISMOD_384FS);
+		fs_mode);
 	if (ret < 0)
 		return ret;
 
@@ -295,17 +291,8 @@ static int __init rx1950_init(void)
 		goto err_plat_add;
 	}
 
-	xtal = clk_get(&s3c24xx_snd_device->dev, "xtal");
-
-	if (IS_ERR(xtal)) {
-		ret = PTR_ERR(xtal);
-		platform_device_unregister(s3c24xx_snd_device);
-		goto err_clk;
-	}
-
 	return 0;
 
-err_clk:
 err_plat_add:
 err_plat_alloc:
 err_gpio_conf:
@@ -320,7 +307,6 @@ static void __exit rx1950_exit(void)
 	platform_device_unregister(s3c24xx_snd_device);
 	snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
 		hp_jack_gpios);
-	clk_put(xtal);
 	gpio_free(S3C2410_GPA(1));
 }
 

From 044b9414c7caf9a26192c73a5b88fa1a8a32a1c1 Mon Sep 17 00:00:00 2001
From: Steven Whitehouse <swhiteho@redhat.com>
Date: Wed, 3 Nov 2010 20:01:07 +0000
Subject: [PATCH 0599/1066] GFS2: Fix inode deallocation race

This area of the code has always been a bit delicate due to the
subtleties of lock ordering. The problem is that for "normal"
alloc/dealloc, we always grab the inode locks first and the rgrp lock
later.

In order to ensure no races in looking up the unlinked, but still
allocated inodes, we need to hold the rgrp lock when we do the lookup,
which means that we can't take the inode glock.

The solution is to borrow the technique already used by NFS to solve
what is essentially the same problem (given an inode number, look up
the inode carefully, checking that it really is in the expected
state).

We cannot do that directly from the allocation code (lock ordering
again) so we give the job to the pre-existing delete workqueue and
carry on with the allocation as normal.

If we find there is no space, we do a journal flush (required anyway
if space from a deallocation is to be released) which should block
against the pending deallocations, so we should always get the space
back.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
---
 fs/gfs2/export.c |  46 ++------------
 fs/gfs2/glock.c  |  21 +++---
 fs/gfs2/inode.c  | 162 ++++++++++++-----------------------------------
 fs/gfs2/inode.h  |   4 +-
 fs/gfs2/rgrp.c   |  91 +++++++++++++-------------
 5 files changed, 103 insertions(+), 221 deletions(-)

diff --git a/fs/gfs2/export.c b/fs/gfs2/export.c
index 06d582732d34..5ab3839dfcb9 100644
--- a/fs/gfs2/export.c
+++ b/fs/gfs2/export.c
@@ -138,10 +138,8 @@ static struct dentry *gfs2_get_dentry(struct super_block *sb,
 				      struct gfs2_inum_host *inum)
 {
 	struct gfs2_sbd *sdp = sb->s_fs_info;
-	struct gfs2_holder i_gh;
 	struct inode *inode;
 	struct dentry *dentry;
-	int error;
 
 	inode = gfs2_ilookup(sb, inum->no_addr);
 	if (inode) {
@@ -152,52 +150,16 @@ static struct dentry *gfs2_get_dentry(struct super_block *sb,
 		goto out_inode;
 	}
 
-	error = gfs2_glock_nq_num(sdp, inum->no_addr, &gfs2_inode_glops,
-				  LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
-	if (error)
-		return ERR_PTR(error);
-
-	error = gfs2_check_blk_type(sdp, inum->no_addr, GFS2_BLKST_DINODE);
-	if (error)
-		goto fail;
-
-	inode = gfs2_inode_lookup(sb, DT_UNKNOWN, inum->no_addr, 0);
-	if (IS_ERR(inode)) {
-		error = PTR_ERR(inode);
-		goto fail;
-	}
-
-	error = gfs2_inode_refresh(GFS2_I(inode));
-	if (error) {
-		iput(inode);
-		goto fail;
-	}
-
-	/* Pick up the works we bypass in gfs2_inode_lookup */
-	if (inode->i_state & I_NEW) 
-		gfs2_set_iop(inode);
-
-	if (GFS2_I(inode)->i_no_formal_ino != inum->no_formal_ino) {
-		iput(inode);
-		goto fail;
-	}
-
-	error = -EIO;
-	if (GFS2_I(inode)->i_diskflags & GFS2_DIF_SYSTEM) {
-		iput(inode);
-		goto fail;
-	}
-
-	gfs2_glock_dq_uninit(&i_gh);
+	inode = gfs2_lookup_by_inum(sdp, inum->no_addr, &inum->no_formal_ino,
+				    GFS2_BLKST_DINODE);
+	if (IS_ERR(inode))
+		return ERR_CAST(inode);
 
 out_inode:
 	dentry = d_obtain_alias(inode);
 	if (!IS_ERR(dentry))
 		dentry->d_op = &gfs2_dops;
 	return dentry;
-fail:
-	gfs2_glock_dq_uninit(&i_gh);
-	return ERR_PTR(error);
 }
 
 static struct dentry *gfs2_fh_to_dentry(struct super_block *sb, struct fid *fid,
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 87778857f099..f92c17704169 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -686,21 +686,20 @@ static void delete_work_func(struct work_struct *work)
 {
 	struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_delete);
 	struct gfs2_sbd *sdp = gl->gl_sbd;
-	struct gfs2_inode *ip = NULL;
+	struct gfs2_inode *ip;
 	struct inode *inode;
-	u64 no_addr = 0;
+	u64 no_addr = gl->gl_name.ln_number;
+
+	ip = gl->gl_object;
+	/* Note: Unsafe to dereference ip as we don't hold right refs/locks */
 
-	spin_lock(&gl->gl_spin);
-	ip = (struct gfs2_inode *)gl->gl_object;
 	if (ip)
-		no_addr = ip->i_no_addr;
-	spin_unlock(&gl->gl_spin);
-	if (ip) {
 		inode = gfs2_ilookup(sdp->sd_vfs, no_addr);
-		if (inode) {
-			d_prune_aliases(inode);
-			iput(inode);
-		}
+	else
+		inode = gfs2_lookup_by_inum(sdp, no_addr, NULL, GFS2_BLKST_UNLINKED);
+	if (inode && !IS_ERR(inode)) {
+		d_prune_aliases(inode);
+		iput(inode);
 	}
 	gfs2_glock_put(gl);
 }
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 06370f8bd8cf..e1213f7f9217 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -73,49 +73,6 @@ static struct inode *gfs2_iget(struct super_block *sb, u64 no_addr)
 	return iget5_locked(sb, hash, iget_test, iget_set, &no_addr);
 }
 
-struct gfs2_skip_data {
-	u64	no_addr;
-	int	skipped;
-};
-
-static int iget_skip_test(struct inode *inode, void *opaque)
-{
-	struct gfs2_inode *ip = GFS2_I(inode);
-	struct gfs2_skip_data *data = opaque;
-
-	if (ip->i_no_addr == data->no_addr) {
-		if (inode->i_state & (I_FREEING|I_WILL_FREE)){
-			data->skipped = 1;
-			return 0;
-		}
-		return 1;
-	}
-	return 0;
-}
-
-static int iget_skip_set(struct inode *inode, void *opaque)
-{
-	struct gfs2_inode *ip = GFS2_I(inode);
-	struct gfs2_skip_data *data = opaque;
-
-	if (data->skipped)
-		return 1;
-	inode->i_ino = (unsigned long)(data->no_addr);
-	ip->i_no_addr = data->no_addr;
-	return 0;
-}
-
-static struct inode *gfs2_iget_skip(struct super_block *sb,
-				    u64 no_addr)
-{
-	struct gfs2_skip_data data;
-	unsigned long hash = (unsigned long)no_addr;
-
-	data.no_addr = no_addr;
-	data.skipped = 0;
-	return iget5_locked(sb, hash, iget_skip_test, iget_skip_set, &data);
-}
-
 /**
  * GFS2 lookup code fills in vfs inode contents based on info obtained
  * from directory entry inside gfs2_inode_lookup(). This has caused issues
@@ -243,93 +200,54 @@ fail:
 	return ERR_PTR(error);
 }
 
-/**
- * gfs2_process_unlinked_inode - Lookup an unlinked inode for reclamation
- *                               and try to reclaim it by doing iput.
- *
- * This function assumes no rgrp locks are currently held.
- *
- * @sb: The super block
- * no_addr: The inode number
- *
- */
-
-void gfs2_process_unlinked_inode(struct super_block *sb, u64 no_addr)
+struct inode *gfs2_lookup_by_inum(struct gfs2_sbd *sdp, u64 no_addr,
+				  u64 *no_formal_ino, unsigned int blktype)
 {
-	struct gfs2_sbd *sdp;
-	struct gfs2_inode *ip;
-	struct gfs2_glock *io_gl = NULL;
-	int error;
-	struct gfs2_holder gh;
+	struct super_block *sb = sdp->sd_vfs;
+	struct gfs2_holder i_gh;
 	struct inode *inode;
+	int error;
 
-	inode = gfs2_iget_skip(sb, no_addr);
+	error = gfs2_glock_nq_num(sdp, no_addr, &gfs2_inode_glops,
+				  LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
+	if (error)
+		return ERR_PTR(error);
 
-	if (!inode)
-		return;
+	error = gfs2_check_blk_type(sdp, no_addr, blktype);
+	if (error)
+		goto fail;
 
-	/* If it's not a new inode, someone's using it, so leave it alone. */
-	if (!(inode->i_state & I_NEW)) {
-		iput(inode);
-		return;
+	inode = gfs2_inode_lookup(sb, DT_UNKNOWN, no_addr, 0);
+	if (IS_ERR(inode))
+		goto fail;
+
+	error = gfs2_inode_refresh(GFS2_I(inode));
+	if (error)
+		goto fail_iput;
+
+	/* Pick up the works we bypass in gfs2_inode_lookup */
+	if (inode->i_state & I_NEW) 
+		gfs2_set_iop(inode);
+
+	/* Two extra checks for NFS only */
+	if (no_formal_ino) {
+		error = -ESTALE;
+		if (GFS2_I(inode)->i_no_formal_ino != *no_formal_ino)
+			goto fail_iput;
+
+		error = -EIO;
+		if (GFS2_I(inode)->i_diskflags & GFS2_DIF_SYSTEM)
+			goto fail_iput;
+
+		error = 0;
 	}
 
-	ip = GFS2_I(inode);
-	sdp = GFS2_SB(inode);
-	ip->i_no_formal_ino = -1;
-
-	error = gfs2_glock_get(sdp, no_addr, &gfs2_inode_glops, CREATE, &ip->i_gl);
-	if (unlikely(error))
-		goto fail;
-	ip->i_gl->gl_object = ip;
-
-	error = gfs2_glock_get(sdp, no_addr, &gfs2_iopen_glops, CREATE, &io_gl);
-	if (unlikely(error))
-		goto fail_put;
-
-	set_bit(GIF_INVALID, &ip->i_flags);
-	error = gfs2_glock_nq_init(io_gl, LM_ST_SHARED, LM_FLAG_TRY | GL_EXACT,
-				   &ip->i_iopen_gh);
-	if (unlikely(error))
-		goto fail_iopen;
-
-	ip->i_iopen_gh.gh_gl->gl_object = ip;
-	gfs2_glock_put(io_gl);
-	io_gl = NULL;
-
-	inode->i_mode = DT2IF(DT_UNKNOWN);
-
-	/*
-	 * We must read the inode in order to work out its type in
-	 * this case. Note that this doesn't happen often as we normally
-	 * know the type beforehand. This code path only occurs during
-	 * unlinked inode recovery (where it is safe to do this glock,
-	 * which is not true in the general case).
-	 */
-	error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, LM_FLAG_TRY,
-				   &gh);
-	if (unlikely(error))
-		goto fail_glock;
-
-	/* Inode is now uptodate */
-	gfs2_glock_dq_uninit(&gh);
-	gfs2_set_iop(inode);
-
-	/* The iput will cause it to be deleted. */
-	iput(inode);
-	return;
-
-fail_glock:
-	gfs2_glock_dq(&ip->i_iopen_gh);
-fail_iopen:
-	if (io_gl)
-		gfs2_glock_put(io_gl);
-fail_put:
-	ip->i_gl->gl_object = NULL;
-	gfs2_glock_put(ip->i_gl);
 fail:
-	iget_failed(inode);
-	return;
+	gfs2_glock_dq_uninit(&i_gh);
+	return error ? ERR_PTR(error) : inode;
+fail_iput:
+	iput(inode);
+	goto fail;
 }
 
 static int gfs2_dinode_in(struct gfs2_inode *ip, const void *buf)
diff --git a/fs/gfs2/inode.h b/fs/gfs2/inode.h
index 6720d7d5fbc6..d8499fadcc53 100644
--- a/fs/gfs2/inode.h
+++ b/fs/gfs2/inode.h
@@ -99,7 +99,9 @@ err:
 extern void gfs2_set_iop(struct inode *inode);
 extern struct inode *gfs2_inode_lookup(struct super_block *sb, unsigned type, 
 				       u64 no_addr, u64 no_formal_ino);
-extern void gfs2_process_unlinked_inode(struct super_block *sb, u64 no_addr);
+extern struct inode *gfs2_lookup_by_inum(struct gfs2_sbd *sdp, u64 no_addr,
+					 u64 *no_formal_ino,
+					 unsigned int blktype);
 extern struct inode *gfs2_ilookup(struct super_block *sb, u64 no_addr);
 
 extern int gfs2_inode_refresh(struct gfs2_inode *ip);
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index bef3ab6cf5c1..33c8407b876f 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -963,17 +963,18 @@ static int try_rgrp_fit(struct gfs2_rgrpd *rgd, struct gfs2_alloc *al)
  *          The inode, if one has been found, in inode.
  */
 
-static u64 try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked,
-			   u64 skip)
+static void try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked, u64 skip)
 {
 	u32 goal = 0, block;
 	u64 no_addr;
 	struct gfs2_sbd *sdp = rgd->rd_sbd;
 	unsigned int n;
+	struct gfs2_glock *gl;
+	struct gfs2_inode *ip;
+	int error;
+	int found = 0;
 
-	for(;;) {
-		if (goal >= rgd->rd_data)
-			break;
+	while (goal < rgd->rd_data) {
 		down_write(&sdp->sd_log_flush_lock);
 		n = 1;
 		block = rgblk_search(rgd, goal, GFS2_BLKST_UNLINKED,
@@ -990,11 +991,32 @@ static u64 try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked,
 		if (no_addr == skip)
 			continue;
 		*last_unlinked = no_addr;
-		return no_addr;
+
+		error = gfs2_glock_get(sdp, no_addr, &gfs2_inode_glops, CREATE, &gl);
+		if (error)
+			continue;
+
+		/* If the inode is already in cache, we can ignore it here
+		 * because the existing inode disposal code will deal with
+		 * it when all refs have gone away. Accessing gl_object like
+		 * this is not safe in general. Here it is ok because we do
+		 * not dereference the pointer, and we only need an approx
+		 * answer to whether it is NULL or not.
+		 */
+		ip = gl->gl_object;
+
+		if (ip || queue_work(gfs2_delete_workqueue, &gl->gl_delete) == 0)
+			gfs2_glock_put(gl);
+		else
+			found++;
+
+		/* Limit reclaim to sensible number of tasks */
+		if (found > 2*NR_CPUS)
+			return;
 	}
 
 	rgd->rd_flags &= ~GFS2_RDF_CHECK;
-	return 0;
+	return;
 }
 
 /**
@@ -1075,11 +1097,9 @@ static void forward_rgrp_set(struct gfs2_sbd *sdp, struct gfs2_rgrpd *rgd)
  * Try to acquire rgrp in way which avoids contending with others.
  *
  * Returns: errno
- *          unlinked: the block address of an unlinked block to be reclaimed
  */
 
-static int get_local_rgrp(struct gfs2_inode *ip, u64 *unlinked,
-			  u64 *last_unlinked)
+static int get_local_rgrp(struct gfs2_inode *ip, u64 *last_unlinked)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
 	struct gfs2_rgrpd *rgd, *begin = NULL;
@@ -1089,7 +1109,6 @@ static int get_local_rgrp(struct gfs2_inode *ip, u64 *unlinked,
 	int loops = 0;
 	int error, rg_locked;
 
-	*unlinked = 0;
 	rgd = gfs2_blk2rgrpd(sdp, ip->i_goal);
 
 	while (rgd) {
@@ -1106,17 +1125,10 @@ static int get_local_rgrp(struct gfs2_inode *ip, u64 *unlinked,
 		case 0:
 			if (try_rgrp_fit(rgd, al))
 				goto out;
-			/* If the rg came in already locked, there's no
-			   way we can recover from a failed try_rgrp_unlink
-			   because that would require an iput which can only
-			   happen after the rgrp is unlocked. */
-			if (!rg_locked && rgd->rd_flags & GFS2_RDF_CHECK)
-				*unlinked = try_rgrp_unlink(rgd, last_unlinked,
-							   ip->i_no_addr);
+			if (rgd->rd_flags & GFS2_RDF_CHECK)
+				try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
 			if (!rg_locked)
 				gfs2_glock_dq_uninit(&al->al_rgd_gh);
-			if (*unlinked)
-				return -EAGAIN;
 			/* fall through */
 		case GLR_TRYFAILED:
 			rgd = recent_rgrp_next(rgd);
@@ -1145,13 +1157,10 @@ static int get_local_rgrp(struct gfs2_inode *ip, u64 *unlinked,
 		case 0:
 			if (try_rgrp_fit(rgd, al))
 				goto out;
-			if (!rg_locked && rgd->rd_flags & GFS2_RDF_CHECK)
-				*unlinked = try_rgrp_unlink(rgd, last_unlinked,
-							    ip->i_no_addr);
+			if (rgd->rd_flags & GFS2_RDF_CHECK)
+				try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
 			if (!rg_locked)
 				gfs2_glock_dq_uninit(&al->al_rgd_gh);
-			if (*unlinked)
-				return -EAGAIN;
 			break;
 
 		case GLR_TRYFAILED:
@@ -1204,12 +1213,12 @@ int gfs2_inplace_reserve_i(struct gfs2_inode *ip, int hold_rindex,
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
 	struct gfs2_alloc *al = ip->i_alloc;
 	int error = 0;
-	u64 last_unlinked = NO_BLOCK, unlinked;
+	u64 last_unlinked = NO_BLOCK;
+	int tries = 0;
 
 	if (gfs2_assert_warn(sdp, al->al_requested))
 		return -EINVAL;
 
-try_again:
 	if (hold_rindex) {
 		/* We need to hold the rindex unless the inode we're using is
 		   the rindex itself, in which case it's already held. */
@@ -1218,31 +1227,23 @@ try_again:
 		else if (!sdp->sd_rgrps) /* We may not have the rindex read
 					    in, so: */
 			error = gfs2_ri_update_special(ip);
+		if (error)
+			return error;
 	}
 
-	if (error)
-		return error;
+	do {
+		error = get_local_rgrp(ip, &last_unlinked);
+		/* If there is no space, flushing the log may release some */
+		if (error)
+			gfs2_log_flush(sdp, NULL);
+	} while (error && tries++ < 3);
 
-	/* Find an rgrp suitable for allocation.  If it encounters any unlinked
-	   dinodes along the way, error will equal -EAGAIN and unlinked will
-	   contains it block address. We then need to look up that inode and
-	   try to free it, and try the allocation again. */
-	error = get_local_rgrp(ip, &unlinked, &last_unlinked);
 	if (error) {
 		if (hold_rindex && ip != GFS2_I(sdp->sd_rindex))
 			gfs2_glock_dq_uninit(&al->al_ri_gh);
-		if (error != -EAGAIN)
-			return error;
-
-		gfs2_process_unlinked_inode(ip->i_inode.i_sb, unlinked);
-		/* regardless of whether or not gfs2_process_unlinked_inode
-		   was successful, we don't want to repeat it again. */
-		last_unlinked = unlinked;
-		gfs2_log_flush(sdp, NULL);
-		error = 0;
-
-		goto try_again;
+		return error;
 	}
+
 	/* no error, so we have the rgrp set in the inode's allocation. */
 	al->al_file = file;
 	al->al_line = line;

From bcbb243396b82b0369465e9a547b7d5278cd26ad Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Fri, 12 Nov 2010 15:14:55 +0000
Subject: [PATCH 0600/1066] ASoC: Fix dapm_seq_compare() for multi-component

Ensure that we keep all widget powerups in DAPM sequence by making
the CODEC the last thing we compare on rather than the first thing.
Also fix the fact that we're currently comparing the widget pointers
rather than the CODEC pointers when we do the substraction so we
won't get stable results.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/soc-dapm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 7d85c6496afa..75ed6491222d 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -683,12 +683,12 @@ static int dapm_seq_compare(struct snd_soc_dapm_widget *a,
 			    struct snd_soc_dapm_widget *b,
 			    int sort[])
 {
-	if (a->codec != b->codec)
-		return (unsigned long)a - (unsigned long)b;
 	if (sort[a->id] != sort[b->id])
 		return sort[a->id] - sort[b->id];
 	if (a->reg != b->reg)
 		return a->reg - b->reg;
+	if (a->codec != b->codec)
+		return (unsigned long)a->codec - (unsigned long)b->codec;
 
 	return 0;
 }

From 24f3f6b5eff92608a62449e33bfac0eed1447d02 Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Mon, 15 Nov 2010 09:18:49 -0500
Subject: [PATCH 0601/1066] arch/tile: fix rwlock so would-be write lockers
 don't block new readers

This avoids a deadlock in the IGMP code where one core gets a read
lock, another core starts trying to get a write lock (thus blocking
new readers), and then the first core tries to recursively re-acquire
the read lock.

We still try to preserve some degree of balance by giving priority
to additional write lockers that come along while the lock is held
for write, so they can all complete quickly and return the lock to
the readers.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 arch/tile/lib/spinlock_32.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/arch/tile/lib/spinlock_32.c b/arch/tile/lib/spinlock_32.c
index 485e24d62c6b..5cd1c4004eca 100644
--- a/arch/tile/lib/spinlock_32.c
+++ b/arch/tile/lib/spinlock_32.c
@@ -167,23 +167,30 @@ void arch_write_lock_slow(arch_rwlock_t *rwlock, u32 val)
 	 * when we compare them.
 	 */
 	u32 my_ticket_;
-
-	/* Take out the next ticket; this will also stop would-be readers. */
-	if (val & 1)
-		val = get_rwlock(rwlock);
-	rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT);
-
-	/* Extract my ticket value from the original word. */
-	my_ticket_ = val >> WR_NEXT_SHIFT;
+	u32 iterations = 0;
 
 	/*
-	 * Wait until the "current" field matches our ticket, and
-	 * there are no remaining readers.
+	 * Wait until there are no readers, then bump up the next
+	 * field and capture the ticket value.
 	 */
+	for (;;) {
+		if (!(val & 1)) {
+			if ((val >> RD_COUNT_SHIFT) == 0)
+				break;
+			rwlock->lock = val;
+		}
+		delay_backoff(iterations++);
+		val = __insn_tns((int *)&rwlock->lock);
+	}
+
+	/* Take out the next ticket and extract my ticket value. */
+	rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT);
+	my_ticket_ = val >> WR_NEXT_SHIFT;
+
+	/* Wait until the "current" field matches our ticket. */
 	for (;;) {
 		u32 curr_ = val >> WR_CURR_SHIFT;
-		u32 readers = val >> RD_COUNT_SHIFT;
-		u32 delta = ((my_ticket_ - curr_) & WR_MASK) + !!readers;
+		u32 delta = ((my_ticket_ - curr_) & WR_MASK);
 		if (likely(delta == 0))
 			break;
 

From e25cd062b16ed1d41a157aec5a108abd6ff2e9f9 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Sat, 13 Nov 2010 08:44:33 -0800
Subject: [PATCH 0602/1066] PCI: sysfs: fix printk warnings

Cast pci_resource_start() and pci_resource_len() to u64 for printk.

drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 9 has type 'resource_size_t'
drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 10 has type 'resource_size_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/pci-sysfs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 25accc9dda3b..95712a375cd5 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -754,7 +754,8 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
 			"at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n",
 			current->comm, vma->vm_end-vma->vm_start, vma->vm_pgoff,
 			pci_name(pdev), i,
-			pci_resource_start(pdev, i), pci_resource_len(pdev, i));
+			(u64)pci_resource_start(pdev, i),
+			(u64)pci_resource_len(pdev, i));
 		return -EINVAL;
 	}
 

From c2f6805d470af369a7337801deeecea800dbfe1c Mon Sep 17 00:00:00 2001
From: Vivek Goyal <vgoyal@redhat.com>
Date: Mon, 15 Nov 2010 19:32:42 +0100
Subject: [PATCH 0603/1066] blk-throttle: Fix calculation of max number of
 WRITES to be dispatched

o Currently we try to dispatch more READS and less WRITES (75%, 25%) in one
  dispatch round. ummy pointed out that there is a bug in max_nr_writes
  calculation. This patch fixes it.

Reported-by: ummy y <yummylln@yahoo.com.cn>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/blk-throttle.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index 56ad4531b412..004be80fd894 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -645,7 +645,7 @@ static int throtl_dispatch_tg(struct throtl_data *td, struct throtl_grp *tg,
 {
 	unsigned int nr_reads = 0, nr_writes = 0;
 	unsigned int max_nr_reads = throtl_grp_quantum*3/4;
-	unsigned int max_nr_writes = throtl_grp_quantum - nr_reads;
+	unsigned int max_nr_writes = throtl_grp_quantum - max_nr_reads;
 	struct bio *bio;
 
 	/* Try to dispatch 75% READS and 25% WRITES */

From 3e9bb2a071614f1d185740f31ac503ecba11d783 Mon Sep 17 00:00:00 2001
From: Vivek Goyal <vgoyal@redhat.com>
Date: Mon, 15 Nov 2010 19:32:43 +0100
Subject: [PATCH 0604/1066] block: fix amiga and atari floppy driver compile
 warning
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Geert, my crosstool don't produce warning below. I guess this has to do
something with compiler version.

- Geert noticed following warning during compilation.

  drivers/block/amiflop.c:1344: warning: ‘rq’ may be used uninitialized in
  this function
  drivers/block/ataflop.c:1402: warning: ‘rq’ may be used uninitialized in
  this function

- Initialize rq to NULL to fix the warning. If we can't find a suitable request
  to dispatch, this function should return NULL instead of a possibly garbage
  pointer.

- Cross compile tested only. Don't have hardware to test it.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 drivers/block/amiflop.c | 2 +-
 drivers/block/ataflop.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index a1725e6488d3..7888501ad9ee 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1341,7 +1341,7 @@ static struct request *set_next_request(void)
 {
 	struct request_queue *q;
 	int cnt = FD_MAX_UNITS;
-	struct request *rq;
+	struct request *rq = NULL;
 
 	/* Find next queue we can dispatch from */
 	fdc_queue = fdc_queue + 1;
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 4e4cc6c828cb..605a67e40bbf 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1399,7 +1399,7 @@ static struct request *set_next_request(void)
 {
 	struct request_queue *q;
 	int old_pos = fdc_queue;
-	struct request *rq;
+	struct request *rq = NULL;
 
 	do {
 		q = unit[fdc_queue].disk->queue;

From 3b42a96dc7870c53d20b419185737d3b8f7a7b74 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@canonical.com>
Date: Mon, 15 Nov 2010 06:01:59 +0000
Subject: [PATCH 0605/1066] net: rtnetlink.h -- only include linux/netdevice.h
 when used by the kernel
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The commit below added a new helper dev_ingress_queue to cleanly obtain the
ingress queue pointer.  This necessitated including 'linux/netdevice.h':

  commit 24824a09e35402b8d58dcc5be803a5ad3937bdba
  Author: Eric Dumazet <eric.dumazet@gmail.com>
  Date:   Sat Oct 2 06:11:55 2010 +0000

    net: dynamic ingress_queue allocation

However this include triggers issues for applications in userspace
which use the rtnetlink interfaces.  Commonly this requires they include
'net/if.h' and 'linux/rtnetlink.h' leading to a compiler error as below:

  In file included from /usr/include/linux/netdevice.h:28:0,
                   from /usr/include/linux/rtnetlink.h:9,
                   from t.c:2:
  /usr/include/linux/if.h:135:8: error: redefinition of ‘struct ifmap’
  /usr/include/net/if.h:112:8: note: originally defined here
  /usr/include/linux/if.h:169:8: error: redefinition of ‘struct ifreq’
  /usr/include/net/if.h:127:8: note: originally defined here
  /usr/include/linux/if.h:218:8: error: redefinition of ‘struct ifconf’
  /usr/include/net/if.h:177:8: note: originally defined here

The new helper is only defined for the kernel and protected by __KERNEL__
therefore we can simply pull the include down into the same protected
section.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/rtnetlink.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index d42f274418b8..bbad657a3725 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -6,7 +6,6 @@
 #include <linux/if_link.h>
 #include <linux/if_addr.h>
 #include <linux/neighbour.h>
-#include <linux/netdevice.h>
 
 /* rtnetlink families. Values up to 127 are reserved for real address
  * families, values above 128 may be used arbitrarily.
@@ -606,6 +605,7 @@ struct tcamsg {
 #ifdef __KERNEL__
 
 #include <linux/mutex.h>
+#include <linux/netdevice.h>
 
 static __inline__ int rtattr_strcmp(const struct rtattr *rta, const char *str)
 {

From 62370e2b9376ea7b76e0423de28ccb322c17e2da Mon Sep 17 00:00:00 2001
From: Arnd Hannemann <arnd@arndnet.de>
Date: Thu, 11 Nov 2010 11:44:32 -0600
Subject: [PATCH 0606/1066] b43legacy: Fix compile on ARM architecture

When b43legacy is compiled on the arm platform, the following errors are seen:

  CC [M]  drivers/net/wireless/b43legacy/xmit.o
In file included from include/net/dst.h:11,
from drivers/net/wireless/b43legacy/xmit.c:31:
include/net/dst_ops.h:28: error: expected ':', ',', ';', '}' or '__attribute__'
   before '____cacheline_aligned_in_smp'
include/net/dst_ops.h: In function 'dst_entries_get_fast':
include/net/dst_ops.h:33: error: 'struct dst_ops' has no member named
   'pcpuc_entries'
include/net/dst_ops.h: In function 'dst_entries_get_slow':
include/net/dst_ops.h:41: error: 'struct dst_ops' has no member named
   'pcpuc_entries'
include/net/dst_ops.h: In function 'dst_entries_add':
include/net/dst_ops.h:49: error: 'struct dst_ops' has no member named
   'pcpuc_entries'
include/net/dst_ops.h: In function 'dst_entries_init':
include/net/dst_ops.h:55: error: 'struct dst_ops' has no member named
   'pcpuc_entries'
include/net/dst_ops.h: In function 'dst_entries_destroy':
include/net/dst_ops.h:60: error: 'struct dst_ops' has no member named
   'pcpuc_entries'
make[4]: *** [drivers/net/wireless/b43legacy/xmit.o] Error 1
make[3]: *** [drivers/net/wireless/b43legacy] Error 2
make[2]: *** [drivers/net/wireless] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2

The cause is a missing include of <linux/cache.h>, which is present for
i386 and x86_64 architectures, but not for arm.

Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/net/dst_ops.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/net/dst_ops.h b/include/net/dst_ops.h
index 1fa5306e3e23..51665b3461b8 100644
--- a/include/net/dst_ops.h
+++ b/include/net/dst_ops.h
@@ -2,6 +2,7 @@
 #define _NET_DST_OPS_H
 #include <linux/types.h>
 #include <linux/percpu_counter.h>
+#include <linux/cache.h>
 
 struct dst_entry;
 struct kmem_cachep;

From 309075cf08ed92a7d2c0e22b7653c5daabbd7ad1 Mon Sep 17 00:00:00 2001
From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Date: Fri, 12 Nov 2010 08:53:56 +0200
Subject: [PATCH 0607/1066] cfg80211: fix WIPHY_FLAG_IBSS_RSN bit

WIPHY_FLAG_IBSS_RSN is BIT(7) as is WIPHY_FLAG_CONTROL_PORT_PROTOCOL. Change
to BIT(8).

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/net/cfg80211.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 2a7936d7851d..97b8b7c9b63c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1355,7 +1355,7 @@ enum wiphy_flags {
 	WIPHY_FLAG_4ADDR_AP			= BIT(5),
 	WIPHY_FLAG_4ADDR_STATION		= BIT(6),
 	WIPHY_FLAG_CONTROL_PORT_PROTOCOL	= BIT(7),
-	WIPHY_FLAG_IBSS_RSN			= BIT(7),
+	WIPHY_FLAG_IBSS_RSN			= BIT(8),
 };
 
 struct mac_address {

From dfa31fef5dd3d204c4cdae7369f3542bd1f7e84a Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Mon, 15 Nov 2010 15:11:26 +0100
Subject: [PATCH 0608/1066] carl9170: fix usb anchor wait timeout

usb_wait_anchor_empty_timeout's @timeout
wants milliseconds and not jiffies.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/carl9170/usb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
index 3317039cd28f..7504ed14c725 100644
--- a/drivers/net/wireless/ath/carl9170/usb.c
+++ b/drivers/net/wireless/ath/carl9170/usb.c
@@ -553,12 +553,12 @@ static int carl9170_usb_flush(struct ar9170 *ar)
 		usb_free_urb(urb);
 	}
 
-	ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, HZ);
+	ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, 1000);
 	if (ret == 0)
 		err = -ETIMEDOUT;
 
 	/* lets wait a while until the tx - queues are dried out */
-	ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, HZ);
+	ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, 1000);
 	if (ret == 0)
 		err = -ETIMEDOUT;
 

From 2aa25c22c445df63b5961883f28767643122f935 Mon Sep 17 00:00:00 2001
From: "Hans J. Koch" <hjk@hansjkoch.de>
Date: Mon, 15 Nov 2010 21:38:56 +0100
Subject: [PATCH 0609/1066] hwmon: Change mail address of Hans J. Koch

My old mail address doesn't exist anymore. This changes all occurrences
to my new address.

Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/amc6821.c | 2 +-
 drivers/hwmon/lm93.c    | 4 ++--
 drivers/hwmon/max6650.c | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index fa9708c2d723..4033974d1bb3 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -4,7 +4,7 @@
 	Copyright (C) 2009 T. Mertelj <tomaz.mertelj@guest.arnes.si>
 
 	Based on max6650.c:
-	Copyright (C) 2007 Hans J. Koch <hjk@linutronix.de>
+	Copyright (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
 
 	This program is free software; you can redistribute it and/or modify
 	it under the terms of the GNU General Public License as published by
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
index 6669255aadcf..c9ed14eba5a6 100644
--- a/drivers/hwmon/lm93.c
+++ b/drivers/hwmon/lm93.c
@@ -20,7 +20,7 @@
     Adapted to 2.6.20 by Carsten Emde <cbe@osadl.org>
         Copyright (c) 2006 Carsten Emde, Open Source Automation Development Lab
 
-    Modified for mainline integration by Hans J. Koch <hjk@linutronix.de>
+    Modified for mainline integration by Hans J. Koch <hjk@hansjkoch.de>
         Copyright (c) 2007 Hans J. Koch, Linutronix GmbH
 
     This program is free software; you can redistribute it and/or modify
@@ -2629,7 +2629,7 @@ static void __exit lm93_exit(void)
 }
 
 MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>, "
-		"Hans J. Koch <hjk@linutronix.de");
+		"Hans J. Koch <hjk@hansjkoch.de>");
 MODULE_DESCRIPTION("LM93 driver");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index a0160ee5caef..9a11532ecae8 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -2,7 +2,7 @@
  * max6650.c - Part of lm_sensors, Linux kernel modules for hardware
  *             monitoring.
  *
- * (C) 2007 by Hans J. Koch <hjk@linutronix.de>
+ * (C) 2007 by Hans J. Koch <hjk@hansjkoch.de>
  *
  * based on code written by John Morris <john.morris@spirentcom.com>
  * Copyright (c) 2003 Spirent Communications

From 61ec2da506ec6544873f0aba026164e4bdd21751 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 15 Nov 2010 21:38:56 +0100
Subject: [PATCH 0610/1066] hwmon: (lm95241) Check validity of input values

This clears the following build-time warnings I was seeing:

drivers/hwmon/lm95241.c: In function "set_interval":
drivers/hwmon/lm95241.c:132:15: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_max2":
drivers/hwmon/lm95241.c:278:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_max1":
drivers/hwmon/lm95241.c:277:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_min2":
drivers/hwmon/lm95241.c:249:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_min1":
drivers/hwmon/lm95241.c:248:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_type2":
drivers/hwmon/lm95241.c:220:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_type1":
drivers/hwmon/lm95241.c:219:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result

This also fixes a small race in set_interval() as a side effect: by
working with a temporary local variable we prevent data->interval from
being accessed at a time it contains the interval value in the wrong
unit.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Davide Rizzo <elpa.rizzo@gmail.com>
---
 drivers/hwmon/lm95241.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index 464340f25496..4546d82f024a 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -128,9 +128,12 @@ static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm95241_data *data = i2c_get_clientdata(client);
+	unsigned long val;
 
-	strict_strtol(buf, 10, &data->interval);
-	data->interval = data->interval * HZ / 1000;
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	data->interval = val * HZ / 1000;
 
 	return count;
 }
@@ -188,7 +191,9 @@ static ssize_t set_type##flag(struct device *dev, \
 	struct lm95241_data *data = i2c_get_clientdata(client); \
 \
 	long val; \
-	strict_strtol(buf, 10, &val); \
+\
+	if (strict_strtol(buf, 10, &val) < 0) \
+		return -EINVAL; \
 \
 	if ((val == 1) || (val == 2)) { \
 \
@@ -227,7 +232,9 @@ static ssize_t set_min##flag(struct device *dev, \
 	struct lm95241_data *data = i2c_get_clientdata(client); \
 \
 	long val; \
-	strict_strtol(buf, 10, &val); \
+\
+	if (strict_strtol(buf, 10, &val) < 0) \
+		return -EINVAL;\
 \
 	mutex_lock(&data->update_lock); \
 \
@@ -256,7 +263,9 @@ static ssize_t set_max##flag(struct device *dev, \
 	struct lm95241_data *data = i2c_get_clientdata(client); \
 \
 	long val; \
-	strict_strtol(buf, 10, &val); \
+\
+	if (strict_strtol(buf, 10, &val) < 0) \
+		return -EINVAL; \
 \
 	mutex_lock(&data->update_lock); \
 \

From ae51cd9bcd9ca841bf45c0ba33823c56ac1ce81e Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 15 Nov 2010 21:38:56 +0100
Subject: [PATCH 0611/1066] hwmon: (w83795) Fix fan control mode attributes

There were two bugs:
* Speed cruise mode was improperly reported for all fans but fan1.
* Fan control method (PWM vs. DC) was mixed with the control mode.
  It will be added back as a separate attribute, as per the standard
  sysfs interface.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/w83795.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index 1d840aa83782..fd96e72adde0 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -857,20 +857,20 @@ show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf)
 	int index = sensor_attr->index;
 	u8 tmp;
 
-	if (1 == (data->pwm_fcms[0] & (1 << index))) {
+	/* Speed cruise mode */
+	if (data->pwm_fcms[0] & (1 << index)) {
 		tmp = 2;
 		goto out;
 	}
+	/* Thermal cruise or SmartFan IV mode */
 	for (tmp = 0; tmp < 6; tmp++) {
 		if (data->pwm_tfmr[tmp] & (1 << index)) {
 			tmp = 3;
 			goto out;
 		}
 	}
-	if (data->pwm_fomc & (1 << index))
-		tmp = 0;
-	else
-		tmp = 1;
+	/* Manual mode */
+	tmp = 1;
 
 out:
 	return sprintf(buf, "%u\n", tmp);
@@ -890,23 +890,21 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
 
 	if (strict_strtoul(buf, 10, &val) < 0)
 		return -EINVAL;
-	if (val > 2)
+	if (val < 1 || val > 2)
 		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
 	switch (val) {
-	case 0:
 	case 1:
+		/* Clear speed cruise mode bits */
 		data->pwm_fcms[0] &= ~(1 << index);
 		w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
+		/* Clear thermal cruise mode bits */
 		for (i = 0; i < 6; i++) {
 			data->pwm_tfmr[i] &= ~(1 << index);
 			w83795_write(client, W83795_REG_TFMR(i),
 				data->pwm_tfmr[i]);
 		}
-		data->pwm_fomc |= 1 << index;
-		data->pwm_fomc ^= val << index;
-		w83795_write(client, W83795_REG_FOMC, data->pwm_fomc);
 		break;
 	case 2:
 		data->pwm_fcms[0] |= (1 << index);

From d5ab845a13de7ff2d195917dad8879acfb6d8ff9 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 15 Nov 2010 21:38:56 +0100
Subject: [PATCH 0612/1066] hwmon: (w83795) Expose fan control method

Expose fan control method (DC vs. PWM) using the standard sysfs
attributes. I've made it read-only as the board should be wired for
a given mode, the BIOS should have set up the chip for this mode, and
you shouldn't have to change it. But it would be easy enough to make
it changeable if someone comes up with a use case.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/w83795.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index fd96e72adde0..95b1f860c14e 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -915,6 +915,21 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
+static ssize_t
+show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	int index = to_sensor_dev_attr_2(attr)->index;
+	unsigned int mode;
+
+	if (data->pwm_fomc & (1 << index))
+		mode = 0;	/* DC */
+	else
+		mode = 1;	/* PWM */
+
+	return sprintf(buf, "%u\n", mode);
+}
+
 static ssize_t
 show_temp_src(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -1551,6 +1566,8 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 		show_pwm, store_pwm, PWM_FREQ, index - 1),	 \
 	SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO,		\
 		show_pwm_enable, store_pwm_enable, NOT_USED, index - 1), \
+	SENSOR_ATTR_2(pwm##index##_mode, S_IRUGO,			\
+		show_pwm_mode, NULL, NOT_USED, index - 1),		\
 	SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \
 		show_fanin, store_fanin, FANIN_TARGET, index - 1) }
 
@@ -1698,7 +1715,7 @@ static const struct sensor_device_attribute_2 w83795_dts[][8] = {
 	SENSOR_ATTR_DTS(14),
 };
 
-static const struct sensor_device_attribute_2 w83795_pwm[][7] = {
+static const struct sensor_device_attribute_2 w83795_pwm[][8] = {
 	SENSOR_ATTR_PWM(1),
 	SENSOR_ATTR_PWM(2),
 	SENSOR_ATTR_PWM(3),

From edff2f8d81ce976ad6895f1d649fcb164be80e3d Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 15 Nov 2010 21:38:56 +0100
Subject: [PATCH 0613/1066] hwmon: (w83795) List all usable temperature sources

Temperature sources are not correlated directly with temperature
channels. A look-up table is required to find out which temperature
sources can be used depending on which temperature channels (both
analog and digital) are enabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/w83795.c | 57 +++++++++++++++++++++++++++++++++++++++---
 1 file changed, 54 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index 95b1f860c14e..c941d3eb249e 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -178,6 +178,14 @@ static const u8 IN_LSB_SHIFT_IDX[][2] = {
 
 #define W83795_REG_TSS(index)		(0x209 + (index))
 
+#define TSS_MAP_RESERVED		0xff
+static const u8 tss_map[4][6] = {
+	{ 0,  1,  2,  3,  4,  5},
+	{ 6,  7,  8,  9,  0,  1},
+	{10, 11, 12, 13,  2,  3},
+	{ 4,  5,  4,  5, TSS_MAP_RESERVED, TSS_MAP_RESERVED},
+};
+
 #define PWM_OUTPUT			0
 #define PWM_FREQ			1
 #define PWM_START			2
@@ -930,6 +938,27 @@ show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf)
 	return sprintf(buf, "%u\n", mode);
 }
 
+/*
+ * Check whether a given temperature source can ever be useful.
+ * Returns the number of selectable temperature channels which are
+ * enabled.
+ */
+static int w83795_tss_useful(const struct w83795_data *data, int tsrc)
+{
+	int useful = 0, i;
+
+	for (i = 0; i < 4; i++) {
+		if (tss_map[i][tsrc] == TSS_MAP_RESERVED)
+			continue;
+		if (tss_map[i][tsrc] < 6)	/* Analog */
+			useful += (data->has_temp >> tss_map[i][tsrc]) & 1;
+		else				/* Digital */
+			useful += (data->has_dts >> (tss_map[i][tsrc] - 6)) & 1;
+	}
+
+	return useful;
+}
+
 static ssize_t
 show_temp_src(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -1608,8 +1637,6 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 	SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,		\
 		show_alarm_beep, store_beep, BEEP_ENABLE,		\
 		index + (index > 4 ? 11 : 17)),				\
-	SENSOR_ATTR_2(temp##index##_source_sel, S_IWUSR | S_IRUGO,	\
-		show_temp_src, store_temp_src, NOT_USED, index - 1),	\
 	SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO,	\
 		show_temp_pwm_enable, store_temp_pwm_enable,		\
 		TEMP_PWM_ENABLE, index - 1),				\
@@ -1695,7 +1722,7 @@ static const struct sensor_device_attribute_2 w83795_fan[][4] = {
 	SENSOR_ATTR_FAN(14),
 };
 
-static const struct sensor_device_attribute_2 w83795_temp[][29] = {
+static const struct sensor_device_attribute_2 w83795_temp[][28] = {
 	SENSOR_ATTR_TEMP(1),
 	SENSOR_ATTR_TEMP(2),
 	SENSOR_ATTR_TEMP(3),
@@ -1726,6 +1753,21 @@ static const struct sensor_device_attribute_2 w83795_pwm[][8] = {
 	SENSOR_ATTR_PWM(8),
 };
 
+static const struct sensor_device_attribute_2 w83795_tss[6] = {
+	SENSOR_ATTR_2(temp1_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 0),
+	SENSOR_ATTR_2(temp2_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 1),
+	SENSOR_ATTR_2(temp3_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 2),
+	SENSOR_ATTR_2(temp4_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 3),
+	SENSOR_ATTR_2(temp5_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 4),
+	SENSOR_ATTR_2(temp6_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 5),
+};
+
 static const struct sensor_device_attribute_2 sda_single_files[] = {
 	SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
 		      store_chassis_clear, ALARM_STATUS, 46),
@@ -1890,6 +1932,15 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 		}
 	}
 
+	for (i = 0; i < ARRAY_SIZE(w83795_tss); i++) {
+		j = w83795_tss_useful(data, i);
+		if (!j)
+			continue;
+		err = fn(dev, &w83795_tss[i].dev_attr);
+		if (err)
+			return err;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
 		err = fn(dev, &sda_single_files[i].dev_attr);
 		if (err)

From 2a2d27da00250c9f117e35653ed5a6a3212e5d77 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 15 Nov 2010 21:38:56 +0100
Subject: [PATCH 0614/1066] hwmon: (w83795) Print the actual temperature
 channels as sources

Don't expose raw register values to user-space. Decode and encode
temperature channels selected as temperature sources as needed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/w83795.c | 30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index c941d3eb249e..400558d97f3d 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -966,17 +966,18 @@ show_temp_src(struct device *dev, struct device_attribute *attr, char *buf)
 	    to_sensor_dev_attr_2(attr);
 	struct w83795_data *data = w83795_update_pwm_config(dev);
 	int index = sensor_attr->index;
-	u8 val = index / 2;
-	u8 tmp = data->temp_src[val];
+	u8 tmp = data->temp_src[index / 2];
 
 	if (index & 1)
-		val = 4;
+		tmp >>= 4;	/* Pick high nibble */
 	else
-		val = 0;
-	tmp >>= val;
-	tmp &= 0x0f;
+		tmp &= 0x0f;	/* Pick low nibble */
 
-	return sprintf(buf, "%u\n", tmp);
+	/* Look-up the actual temperature channel number */
+	if (tmp >= 4 || tss_map[tmp][index] == TSS_MAP_RESERVED)
+		return -EINVAL;		/* Shouldn't happen */
+
+	return sprintf(buf, "%u\n", (unsigned int)tss_map[tmp][index] + 1);
 }
 
 static ssize_t
@@ -988,12 +989,21 @@ store_temp_src(struct device *dev, struct device_attribute *attr,
 	struct sensor_device_attribute_2 *sensor_attr =
 	    to_sensor_dev_attr_2(attr);
 	int index = sensor_attr->index;
-	unsigned long tmp;
+	int tmp;
+	unsigned long channel;
 	u8 val = index / 2;
 
-	if (strict_strtoul(buf, 10, &tmp) < 0)
+	if (strict_strtoul(buf, 10, &channel) < 0 ||
+	    channel < 1 || channel > 14)
+		return -EINVAL;
+
+	/* Check if request can be fulfilled */
+	for (tmp = 0; tmp < 4; tmp++) {
+		if (tss_map[tmp][index] == channel - 1)
+			break;
+	}
+	if (tmp == 4)	/* No match */
 		return -EINVAL;
-	tmp = SENSORS_LIMIT(tmp, 0, 15);
 
 	mutex_lock(&data->update_lock);
 	if (index & 1) {

From cf6b9ea661ef4f20b4a4cba1a232a732339aae2c Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 15 Nov 2010 21:38:56 +0100
Subject: [PATCH 0615/1066] hwmon: (w83795) Read the intrusion state properly

We can't read the intrusion state from the real-time alarm registers
as we do for all other alarm flags, because real-time alarm bits don't
stick (by definition) and the intrusion state has to stick until
explicitly cleared (otherwise it has little value.)

So we have to use the interrupt status register instead, which is read
from the same address but with a configuration bit flipped in another
register.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/w83795.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index 400558d97f3d..600b2adbbd49 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -165,10 +165,11 @@ static const u8 IN_LSB_SHIFT_IDX[][2] = {
 
 #define W83795_REG_VID_CTRL		0x6A
 
+#define W83795_REG_ALARM_CTRL		0x40
+#define ALARM_CTRL_RTSACS		(1 << 7)
 #define W83795_REG_ALARM(index)		(0x41 + (index))
-#define W83795_REG_BEEP(index)		(0x50 + (index))
-
 #define W83795_REG_CLR_CHASSIS		0x4D
+#define W83795_REG_BEEP(index)		(0x50 + (index))
 
 
 #define W83795_REG_FCMS1		0x201
@@ -585,6 +586,7 @@ static struct w83795_data *w83795_update_device(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct w83795_data *data = i2c_get_clientdata(client);
 	u16 tmp;
+	u8 intrusion;
 	int i;
 
 	mutex_lock(&data->update_lock);
@@ -656,9 +658,24 @@ static struct w83795_data *w83795_update_device(struct device *dev)
 		    w83795_read(client, W83795_REG_PWM(i, PWM_OUTPUT));
 	}
 
-	/* update alarm */
+	/* Update intrusion and alarms
+	 * It is important to read intrusion first, because reading from
+	 * register SMI STS6 clears the interrupt status temporarily. */
+	tmp = w83795_read(client, W83795_REG_ALARM_CTRL);
+	/* Switch to interrupt status for intrusion if needed */
+	if (tmp & ALARM_CTRL_RTSACS)
+		w83795_write(client, W83795_REG_ALARM_CTRL,
+			     tmp & ~ALARM_CTRL_RTSACS);
+	intrusion = w83795_read(client, W83795_REG_ALARM(5)) & (1 << 6);
+	/* Switch to real-time alarms */
+	w83795_write(client, W83795_REG_ALARM_CTRL, tmp | ALARM_CTRL_RTSACS);
 	for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
 		data->alarms[i] = w83795_read(client, W83795_REG_ALARM(i));
+	data->alarms[5] |= intrusion;
+	/* Restore original configuration if needed */
+	if (!(tmp & ALARM_CTRL_RTSACS))
+		w83795_write(client, W83795_REG_ALARM_CTRL,
+			     tmp & ~ALARM_CTRL_RTSACS);
 
 	data->last_updated = jiffies;
 	data->valid = 1;

From 793c51d5fdfa76043f1221fdaa022f50146e8386 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 15 Nov 2010 21:38:57 +0100
Subject: [PATCH 0616/1066] hwmon: (w83795) Clear intrusion alarm immediately

When asked to clear the intrusion alarm, do so immediately. We have to
invalidate the cache to make sure the new status will be read. But we
also have to read from the status register once to clear the pending
alarm, as writing to CLR_CHS surprising won't clear it automatically.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/w83795.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index 600b2adbbd49..90f4ffb357b7 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -755,6 +755,10 @@ store_chassis_clear(struct device *dev,
 	val = w83795_read(client, W83795_REG_CLR_CHASSIS);
 	val |= 0x80;
 	w83795_write(client, W83795_REG_CLR_CHASSIS, val);
+
+	/* Clear status and force cache refresh */
+	w83795_read(client, W83795_REG_ALARM(5));
+	data->valid = 0;
 	mutex_unlock(&data->update_lock);
 	return count;
 }

From 52d159eecced3e4ead901e2a14347f5c11ea4bab Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 15 Nov 2010 21:38:57 +0100
Subject: [PATCH 0617/1066] hwmon: (w83795) Check for BEEP pin availability

On the W83795ADG, there's a single pin for BEEP and OVT#, so you
can't have both. Check the configuration and don't create beep
attributes when BEEP pin is not available.

The W83795G has a dedicated BEEP pin so the functionality is always
available there.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/w83795.c | 58 +++++++++++++++++++++++++++++++++++++-----
 1 file changed, 51 insertions(+), 7 deletions(-)

diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index 90f4ffb357b7..cdbc7448491e 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -171,6 +171,9 @@ static const u8 IN_LSB_SHIFT_IDX[][2] = {
 #define W83795_REG_CLR_CHASSIS		0x4D
 #define W83795_REG_BEEP(index)		(0x50 + (index))
 
+#define W83795_REG_OVT_CFG		0x58
+#define OVT_CFG_SEL			(1 << 7)
+
 
 #define W83795_REG_FCMS1		0x201
 #define W83795_REG_FCMS2		0x208
@@ -378,6 +381,7 @@ struct w83795_data {
 	u8 setup_pwm[3];	/* Register value */
 
 	u8 alarms[6];		/* Register value */
+	u8 enable_beep;
 	u8 beeps[6];		/* Register value */
 
 	char valid;
@@ -508,8 +512,11 @@ static void w83795_update_limits(struct i2c_client *client)
 	}
 
 	/* Read beep settings */
-	for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
-		data->beeps[i] = w83795_read(client, W83795_REG_BEEP(i));
+	if (data->enable_beep) {
+		for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
+			data->beeps[i] =
+				w83795_read(client, W83795_REG_BEEP(i));
+	}
 
 	data->valid_limits = 1;
 }
@@ -1588,7 +1595,7 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 
 #define NOT_USED			-1
 
-/* Don't change the attribute order, _max and _min are accessed by index
+/* Don't change the attribute order, _max, _min and _beep are accessed by index
  * somewhere else in the code */
 #define SENSOR_ATTR_IN(index) {						\
 	SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL,	\
@@ -1603,6 +1610,8 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 		show_alarm_beep, store_beep, BEEP_ENABLE,		\
 		index + ((index > 14) ? 1 : 0)) }
 
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
 #define SENSOR_ATTR_FAN(index) {					\
 	SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan,		\
 		NULL, FAN_INPUT, index - 1), \
@@ -1631,6 +1640,8 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 	SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \
 		show_fanin, store_fanin, FANIN_TARGET, index - 1) }
 
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
 #define SENSOR_ATTR_DTS(index) {					\
 	SENSOR_ATTR_2(temp##index##_type, S_IRUGO ,		\
 		show_dts_mode, NULL, NOT_USED, index - 7),	\
@@ -1649,6 +1660,8 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 	SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,		\
 		show_alarm_beep, store_beep, BEEP_ENABLE, index + 17) }
 
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
 #define SENSOR_ATTR_TEMP(index) {					\
 	SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \
 		show_temp_mode, store_temp_mode, NOT_USED, index - 1),	\
@@ -1802,10 +1815,6 @@ static const struct sensor_device_attribute_2 w83795_tss[6] = {
 static const struct sensor_device_attribute_2 sda_single_files[] = {
 	SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
 		      store_chassis_clear, ALARM_STATUS, 46),
-	SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
-		      store_beep, BEEP_ENABLE, 46),
-	SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
-		      store_beep, BEEP_ENABLE, 47),
 #ifdef CONFIG_SENSORS_W83795_FANCTRL
 	SENSOR_ATTR_2(speed_cruise_tolerance, S_IWUSR | S_IRUGO, show_fanin,
 		store_fanin, FANIN_TOL, NOT_USED),
@@ -1818,6 +1827,13 @@ static const struct sensor_device_attribute_2 sda_single_files[] = {
 #endif
 };
 
+static const struct sensor_device_attribute_2 sda_beep_files[] = {
+	SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_beep, BEEP_ENABLE, 46),
+	SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_beep, BEEP_ENABLE, 47),
+};
+
 /*
  * Driver interface
  */
@@ -1947,6 +1963,8 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 		if (!(data->has_in & (1 << i)))
 			continue;
 		for (j = 0; j < ARRAY_SIZE(w83795_in[0]); j++) {
+			if (j == 4 && !data->enable_beep)
+				continue;
 			err = fn(dev, &w83795_in[i][j].dev_attr);
 			if (err)
 				return err;
@@ -1957,6 +1975,8 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 		if (!(data->has_fan & (1 << i)))
 			continue;
 		for (j = 0; j < ARRAY_SIZE(w83795_fan[0]); j++) {
+			if (j == 3 && !data->enable_beep)
+				continue;
 			err = fn(dev, &w83795_fan[i][j].dev_attr);
 			if (err)
 				return err;
@@ -1978,6 +1998,14 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 			return err;
 	}
 
+	if (data->enable_beep) {
+		for (i = 0; i < ARRAY_SIZE(sda_beep_files); i++) {
+			err = fn(dev, &sda_beep_files[i].dev_attr);
+			if (err)
+				return err;
+		}
+	}
+
 #ifdef CONFIG_SENSORS_W83795_FANCTRL
 	for (i = 0; i < data->has_pwm; i++) {
 		for (j = 0; j < ARRAY_SIZE(w83795_pwm[0]); j++) {
@@ -1996,6 +2024,8 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 #else
 		for (j = 0; j < 8; j++) {
 #endif
+			if (j == 7 && !data->enable_beep)
+				continue;
 			err = fn(dev, &w83795_temp[i][j].dev_attr);
 			if (err)
 				return err;
@@ -2007,6 +2037,8 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 			if (!(data->has_dts & (1 << i)))
 				continue;
 			for (j = 0; j < ARRAY_SIZE(w83795_dts[0]); j++) {
+				if (j == 7 && !data->enable_beep)
+					continue;
 				err = fn(dev, &w83795_dts[i][j].dev_attr);
 				if (err)
 					return err;
@@ -2146,6 +2178,18 @@ static int w83795_probe(struct i2c_client *client,
 	else
 		data->has_pwm = 2;
 
+	/* Check if BEEP pin is available */
+	if (data->chip_type == w83795g) {
+		/* The W83795G has a dedicated BEEP pin */
+		data->enable_beep = 1;
+	} else {
+		/* The W83795ADG has a shared pin for OVT# and BEEP, so you
+		 * can't have both */
+		tmp = w83795_read(client, W83795_REG_OVT_CFG);
+		if ((tmp & OVT_CFG_SEL) == 0)
+			data->enable_beep = 1;
+	}
+
 	err = w83795_handle_files(dev, device_create_file);
 	if (err)
 		goto exit_remove;

From 22d3243de86bc92d874abb7c5b185d5c47aba323 Mon Sep 17 00:00:00 2001
From: Jim Bos <jim876@xs4all.nl>
Date: Mon, 15 Nov 2010 21:22:37 +0100
Subject: [PATCH 0618/1066] Fix gcc 4.5.1 miscompiling drivers/char/i8k.c
 (again)

The fix in commit 6b4e81db2552 ("i8k: Tell gcc that *regs gets
clobbered") to work around the gcc miscompiling i8k.c to add "+m
(*regs)" caused register pressure problems and a build failure.

Changing the 'asm' statement to 'asm volatile' instead should prevent
that and works around the gcc bug as well, so we can remove the "+m".

[ Background on the gcc bug: a memory clobber fails to mark the function
  the asm resides in as non-pure (aka "__attribute__((const))"), so if
  the function does nothing else that triggers the non-pure logic, gcc
  will think that that function has no side effects at all. As a result,
  callers will be mis-compiled.

  Adding the "+m" made gcc see that it's not a pure function, and so
  does "asm volatile". The problem was never really the need to mark
  "*regs" as changed, since the memory clobber did that part - the
  problem was just a bug in the gcc "pure" function analysis  - Linus ]

Signed-off-by: Jim Bos <jim876@xs4all.nl>
Acked-by: Jakub Jelinek <jakub@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/i8k.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
index f0863bec186f..d72433f2d310 100644
--- a/drivers/char/i8k.c
+++ b/drivers/char/i8k.c
@@ -120,7 +120,7 @@ static int i8k_smm(struct smm_regs *regs)
 	int eax = regs->eax;
 
 #if defined(CONFIG_X86_64)
-	asm("pushq %%rax\n\t"
+	asm volatile("pushq %%rax\n\t"
 		"movl 0(%%rax),%%edx\n\t"
 		"pushq %%rdx\n\t"
 		"movl 4(%%rax),%%ebx\n\t"
@@ -142,11 +142,11 @@ static int i8k_smm(struct smm_regs *regs)
 		"lahf\n\t"
 		"shrl $8,%%eax\n\t"
 		"andl $1,%%eax\n"
-		:"=a"(rc), "+m" (*regs)
+		:"=a"(rc)
 		:    "a"(regs)
 		:    "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
 #else
-	asm("pushl %%eax\n\t"
+	asm volatile("pushl %%eax\n\t"
 	    "movl 0(%%eax),%%edx\n\t"
 	    "push %%edx\n\t"
 	    "movl 4(%%eax),%%ebx\n\t"
@@ -168,7 +168,7 @@ static int i8k_smm(struct smm_regs *regs)
 	    "lahf\n\t"
 	    "shrl $8,%%eax\n\t"
 	    "andl $1,%%eax\n"
-	    :"=a"(rc), "+m" (*regs)
+	    :"=a"(rc)
 	    :    "a"(regs)
 	    :    "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
 #endif

From 898213200cbadc570ef4248a6d90430c4a9c2908 Mon Sep 17 00:00:00 2001
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Fri, 12 Nov 2010 11:59:31 -0800
Subject: [PATCH 0619/1066] xhci: Fix command ring replay after resume.

Andiry's xHCI bus suspend patch introduced the possibly of a host
controller replaying old commands on the command ring, if the host
successfully restores the registers after a resume.

After a resume from suspend, the xHCI driver must restore the registers,
including the command ring pointer.  I had suggested that Andiry set the
command ring pointer to the current command ring dequeue pointer, so that
the driver wouldn't have to zero the command ring.

Unfortunately, setting the command ring pointer to the current dequeue
pointer won't work because the register assumes the pointer is 64-byte
aligned, and TRBs on the command ring are 16-byte aligned.  The lower
seven bits will always be masked off, leading to the written pointer being
up to 3 TRBs behind the intended pointer.

Here's a log excerpt.  On init, the xHCI driver places a vendor-specific
command on the command ring:

[  215.750958] xhci_hcd 0000:01:00.0: Vendor specific event TRB type = 48
[  215.750960] xhci_hcd 0000:01:00.0: NEC firmware version 30.25
[  215.750962] xhci_hcd 0000:01:00.0: Command ring deq = 0x3781e010 (DMA)

When we resume, the command ring dequeue pointer to be written should have
been 0x3781e010.  Instead, it's 0x3781e000:

[  235.557846] xhci_hcd 0000:01:00.0: // Setting command ring address to 0x3781e001
[  235.557848] xhci_hcd 0000:01:00.0: `MEM_WRITE_DWORD(3'b000, 64'hffffc900100bc038, 64'h3781e001, 4'hf);
[  235.557850] xhci_hcd 0000:01:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc900100bc020, 32'h204, 4'hf);
[  235.557866] usb usb9: root hub lost power or was reset

(I can't see the results of this bug because the xHCI restore always fails
on this box, and the xHCI driver re-allocates everything.)

The fix is to zero the command ring and put the software and hardware
enqueue and dequeue pointer back to the beginning of the ring.  We do this
before the system suspends, to be paranoid and prevent the BIOS from
starting the host without clearing the command ring pointer, which might
cause the host to muck with stale memory.  (The pointer isn't required to
be in the suspend power well, but it could be.)  The command ring pointer
is set again after the host resumes.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Andiry Xu <andiry.xu@amd.com>
---
 drivers/usb/host/xhci.c | 71 +++++++++++++++++++++++++++++++++++------
 1 file changed, 61 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 7c8d70fbe113..06fca0835b52 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -577,6 +577,65 @@ static void xhci_restore_registers(struct xhci_hcd *xhci)
 	xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
 }
 
+static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
+{
+	u64	val_64;
+
+	/* step 2: initialize command ring buffer */
+	val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+	val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+		(xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+				      xhci->cmd_ring->dequeue) &
+		 (u64) ~CMD_RING_RSVD_BITS) |
+		xhci->cmd_ring->cycle_state;
+	xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n",
+			(long unsigned long) val_64);
+	xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+}
+
+/*
+ * The whole command ring must be cleared to zero when we suspend the host.
+ *
+ * The host doesn't save the command ring pointer in the suspend well, so we
+ * need to re-program it on resume.  Unfortunately, the pointer must be 64-byte
+ * aligned, because of the reserved bits in the command ring dequeue pointer
+ * register.  Therefore, we can't just set the dequeue pointer back in the
+ * middle of the ring (TRBs are 16-byte aligned).
+ */
+static void xhci_clear_command_ring(struct xhci_hcd *xhci)
+{
+	struct xhci_ring *ring;
+	struct xhci_segment *seg;
+
+	ring = xhci->cmd_ring;
+	seg = ring->deq_seg;
+	do {
+		memset(seg->trbs, 0, SEGMENT_SIZE);
+		seg = seg->next;
+	} while (seg != ring->deq_seg);
+
+	/* Reset the software enqueue and dequeue pointers */
+	ring->deq_seg = ring->first_seg;
+	ring->dequeue = ring->first_seg->trbs;
+	ring->enq_seg = ring->deq_seg;
+	ring->enqueue = ring->dequeue;
+
+	/*
+	 * Ring is now zeroed, so the HW should look for change of ownership
+	 * when the cycle bit is set to 1.
+	 */
+	ring->cycle_state = 1;
+
+	/*
+	 * Reset the hardware dequeue pointer.
+	 * Yes, this will need to be re-written after resume, but we're paranoid
+	 * and want to make sure the hardware doesn't access bogus memory
+	 * because, say, the BIOS or an SMI started the host without changing
+	 * the command ring pointers.
+	 */
+	xhci_set_cmd_ring_deq(xhci);
+}
+
 /*
  * Stop HC (not bus-specific)
  *
@@ -604,6 +663,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
 		spin_unlock_irq(&xhci->lock);
 		return -ETIMEDOUT;
 	}
+	xhci_clear_command_ring(xhci);
 
 	/* step 3: save registers */
 	xhci_save_registers(xhci);
@@ -635,7 +695,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	u32			command, temp = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
-	u64	val_64;
 	int	old_state, retval;
 
 	old_state = hcd->state;
@@ -648,15 +707,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		/* step 1: restore register */
 		xhci_restore_registers(xhci);
 		/* step 2: initialize command ring buffer */
-		val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
-		val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
-			 (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
-					       xhci->cmd_ring->dequeue) &
-			 (u64) ~CMD_RING_RSVD_BITS) |
-			 xhci->cmd_ring->cycle_state;
-		xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n",
-				(long unsigned long) val_64);
-		xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+		xhci_set_cmd_ring_deq(xhci);
 		/* step 3: restore state and start state*/
 		/* step 3: set CRS flag */
 		command = xhci_readl(xhci, &xhci->op_regs->command);

From 968ab1838a5d48f02f5b471aa1d0e59e2cc2ccbc Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 15 Nov 2010 13:37:37 -0800
Subject: [PATCH 0620/1066] include/linux/kernel.h: Move logging bits to
 include/linux/printk.h

Move the logging bits from kernel.h into printk.h so that
there is a bit more logical separation of the generic from
the printk logging specific parts.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/kernel.h | 245 +---------------------------------------
 include/linux/printk.h | 248 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 249 insertions(+), 244 deletions(-)
 create mode 100644 include/linux/printk.h

diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index fc3da9e4da19..b6de9a6f7018 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -17,13 +17,11 @@
 #include <linux/bitops.h>
 #include <linux/log2.h>
 #include <linux/typecheck.h>
+#include <linux/printk.h>
 #include <linux/dynamic_debug.h>
 #include <asm/byteorder.h>
 #include <asm/bug.h>
 
-extern const char linux_banner[];
-extern const char linux_proc_banner[];
-
 #define USHRT_MAX	((u16)(~0U))
 #define SHRT_MAX	((s16)(USHRT_MAX>>1))
 #define SHRT_MIN	((s16)(-SHRT_MAX - 1))
@@ -110,31 +108,6 @@ extern const char linux_proc_banner[];
  */
 #define lower_32_bits(n) ((u32)(n))
 
-#define	KERN_EMERG	"<0>"	/* system is unusable			*/
-#define	KERN_ALERT	"<1>"	/* action must be taken immediately	*/
-#define	KERN_CRIT	"<2>"	/* critical conditions			*/
-#define	KERN_ERR	"<3>"	/* error conditions			*/
-#define	KERN_WARNING	"<4>"	/* warning conditions			*/
-#define	KERN_NOTICE	"<5>"	/* normal but significant condition	*/
-#define	KERN_INFO	"<6>"	/* informational			*/
-#define	KERN_DEBUG	"<7>"	/* debug-level messages			*/
-
-/* Use the default kernel loglevel */
-#define KERN_DEFAULT	"<d>"
-/*
- * Annotation for a "continued" line of log printout (only done after a
- * line that had no enclosing \n). Only to be used by core/arch code
- * during early bootup (a continued line is not SMP-safe otherwise).
- */
-#define	KERN_CONT	"<c>"
-
-extern int console_printk[];
-
-#define console_loglevel (console_printk[0])
-#define default_message_loglevel (console_printk[1])
-#define minimum_console_loglevel (console_printk[2])
-#define default_console_loglevel (console_printk[3])
-
 struct completion;
 struct pt_regs;
 struct user;
@@ -187,11 +160,6 @@ static inline void might_fault(void)
 }
 #endif
 
-struct va_format {
-	const char *fmt;
-	va_list *va;
-};
-
 extern struct atomic_notifier_head panic_notifier_list;
 extern long (*panic_blink)(int state);
 NORET_TYPE void panic(const char * fmt, ...)
@@ -245,115 +213,8 @@ extern int func_ptr_is_kernel_text(void *ptr);
 struct pid;
 extern struct pid *session_of_pgrp(struct pid *pgrp);
 
-/*
- * FW_BUG
- * Add this to a message where you are sure the firmware is buggy or behaves
- * really stupid or out of spec. Be aware that the responsible BIOS developer
- * should be able to fix this issue or at least get a concrete idea of the
- * problem by reading your message without the need of looking at the kernel
- * code.
- * 
- * Use it for definite and high priority BIOS bugs.
- *
- * FW_WARN
- * Use it for not that clear (e.g. could the kernel messed up things already?)
- * and medium priority BIOS bugs.
- *
- * FW_INFO
- * Use this one if you want to tell the user or vendor about something
- * suspicious, but generally harmless related to the firmware.
- *
- * Use it for information or very low priority BIOS bugs.
- */
-#define FW_BUG		"[Firmware Bug]: "
-#define FW_WARN		"[Firmware Warn]: "
-#define FW_INFO		"[Firmware Info]: "
-
-/*
- * HW_ERR
- * Add this to a message for hardware errors, so that user can report
- * it to hardware vendor instead of LKML or software vendor.
- */
-#define HW_ERR		"[Hardware Error]: "
-
-#ifdef CONFIG_PRINTK
-asmlinkage int vprintk(const char *fmt, va_list args)
-	__attribute__ ((format (printf, 1, 0)));
-asmlinkage int printk(const char * fmt, ...)
-	__attribute__ ((format (printf, 1, 2))) __cold;
-
-/*
- * Please don't use printk_ratelimit(), because it shares ratelimiting state
- * with all other unrelated printk_ratelimit() callsites.  Instead use
- * printk_ratelimited() or plain old __ratelimit().
- */
-extern int __printk_ratelimit(const char *func);
-#define printk_ratelimit() __printk_ratelimit(__func__)
-extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
-				   unsigned int interval_msec);
-
-extern int printk_delay_msec;
-extern int dmesg_restrict;
-
-/*
- * Print a one-time message (analogous to WARN_ONCE() et al):
- */
-#define printk_once(x...) ({			\
-	static bool __print_once;		\
-						\
-	if (!__print_once) {			\
-		__print_once = true;		\
-		printk(x);			\
-	}					\
-})
-
-void log_buf_kexec_setup(void);
-#else
-static inline int vprintk(const char *s, va_list args)
-	__attribute__ ((format (printf, 1, 0)));
-static inline int vprintk(const char *s, va_list args) { return 0; }
-static inline int printk(const char *s, ...)
-	__attribute__ ((format (printf, 1, 2)));
-static inline int __cold printk(const char *s, ...) { return 0; }
-static inline int printk_ratelimit(void) { return 0; }
-static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
-					  unsigned int interval_msec)	\
-		{ return false; }
-
-/* No effect, but we still get type checking even in the !PRINTK case: */
-#define printk_once(x...) printk(x)
-
-static inline void log_buf_kexec_setup(void)
-{
-}
-#endif
-
-/*
- * Dummy printk for disabled debugging statements to use whilst maintaining
- * gcc's format and side-effect checking.
- */
-static inline __attribute__ ((format (printf, 1, 2)))
-int no_printk(const char *s, ...) { return 0; }
-
-extern int printk_needs_cpu(int cpu);
-extern void printk_tick(void);
-
-extern void asmlinkage __attribute__((format(printf, 1, 2)))
-	early_printk(const char *fmt, ...);
-
 unsigned long int_sqrt(unsigned long);
 
-static inline void console_silent(void)
-{
-	console_loglevel = 0;
-}
-
-static inline void console_verbose(void)
-{
-	if (console_loglevel)
-		console_loglevel = 15;
-}
-
 extern void bust_spinlocks(int yes);
 extern void wake_up_klogd(void);
 extern int oops_in_progress;		/* If set, an oops, panic(), BUG() or die() is in progress */
@@ -390,22 +251,6 @@ extern enum system_states {
 #define TAINT_CRAP			10
 #define TAINT_FIRMWARE_WORKAROUND	11
 
-extern void dump_stack(void) __cold;
-
-enum {
-	DUMP_PREFIX_NONE,
-	DUMP_PREFIX_ADDRESS,
-	DUMP_PREFIX_OFFSET
-};
-extern void hex_dump_to_buffer(const void *buf, size_t len,
-				int rowsize, int groupsize,
-				char *linebuf, size_t linebuflen, bool ascii);
-extern void print_hex_dump(const char *level, const char *prefix_str,
-				int prefix_type, int rowsize, int groupsize,
-				const void *buf, size_t len, bool ascii);
-extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
-			const void *buf, size_t len);
-
 extern const char hex_asc[];
 #define hex_asc_lo(x)	hex_asc[((x) & 0x0f)]
 #define hex_asc_hi(x)	hex_asc[((x) & 0xf0) >> 4]
@@ -419,94 +264,6 @@ static inline char *pack_hex_byte(char *buf, u8 byte)
 
 extern int hex_to_bin(char ch);
 
-#ifndef pr_fmt
-#define pr_fmt(fmt) fmt
-#endif
-
-#define pr_emerg(fmt, ...) \
-        printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert(fmt, ...) \
-        printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit(fmt, ...) \
-        printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err(fmt, ...) \
-        printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warning(fmt, ...) \
-        printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warn pr_warning
-#define pr_notice(fmt, ...) \
-        printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info(fmt, ...) \
-        printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_cont(fmt, ...) \
-	printk(KERN_CONT fmt, ##__VA_ARGS__)
-
-/* pr_devel() should produce zero code unless DEBUG is defined */
-#ifdef DEBUG
-#define pr_devel(fmt, ...) \
-	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_devel(fmt, ...) \
-	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
-#endif
-
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug(fmt, ...) \
-	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#elif defined(CONFIG_DYNAMIC_DEBUG)
-/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
-#define pr_debug(fmt, ...) \
-	dynamic_pr_debug(fmt, ##__VA_ARGS__)
-#else
-#define pr_debug(fmt, ...) \
-	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
-#endif
-
-/*
- * ratelimited messages with local ratelimit_state,
- * no local ratelimit_state used in the !PRINTK case
- */
-#ifdef CONFIG_PRINTK
-#define printk_ratelimited(fmt, ...)  ({				\
-	static DEFINE_RATELIMIT_STATE(_rs,				\
-				      DEFAULT_RATELIMIT_INTERVAL,	\
-				      DEFAULT_RATELIMIT_BURST);		\
-									\
-	if (__ratelimit(&_rs))						\
-		printk(fmt, ##__VA_ARGS__);				\
-})
-#else
-/* No effect, but we still get type checking even in the !PRINTK case: */
-#define printk_ratelimited printk
-#endif
-
-#define pr_emerg_ratelimited(fmt, ...) \
-	printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert_ratelimited(fmt, ...) \
-	printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit_ratelimited(fmt, ...) \
-	printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err_ratelimited(fmt, ...) \
-	printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warning_ratelimited(fmt, ...) \
-	printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warn_ratelimited pr_warning_ratelimited
-#define pr_notice_ratelimited(fmt, ...) \
-	printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info_ratelimited(fmt, ...) \
-	printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-/* no pr_cont_ratelimited, don't do that... */
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug_ratelimited(fmt, ...) \
-	printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_debug_ratelimited(fmt, ...) \
-	({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
-				     ##__VA_ARGS__); 0; })
-#endif
-
 /*
  * General tracing related utility functions - trace_printk(),
  * tracing_on/tracing_off and tracing_start()/tracing_stop
diff --git a/include/linux/printk.h b/include/linux/printk.h
new file mode 100644
index 000000000000..b772ca5fbdf0
--- /dev/null
+++ b/include/linux/printk.h
@@ -0,0 +1,248 @@
+#ifndef __KERNEL_PRINTK__
+#define __KERNEL_PRINTK__
+
+extern const char linux_banner[];
+extern const char linux_proc_banner[];
+
+#define	KERN_EMERG	"<0>"	/* system is unusable			*/
+#define	KERN_ALERT	"<1>"	/* action must be taken immediately	*/
+#define	KERN_CRIT	"<2>"	/* critical conditions			*/
+#define	KERN_ERR	"<3>"	/* error conditions			*/
+#define	KERN_WARNING	"<4>"	/* warning conditions			*/
+#define	KERN_NOTICE	"<5>"	/* normal but significant condition	*/
+#define	KERN_INFO	"<6>"	/* informational			*/
+#define	KERN_DEBUG	"<7>"	/* debug-level messages			*/
+
+/* Use the default kernel loglevel */
+#define KERN_DEFAULT	"<d>"
+/*
+ * Annotation for a "continued" line of log printout (only done after a
+ * line that had no enclosing \n). Only to be used by core/arch code
+ * during early bootup (a continued line is not SMP-safe otherwise).
+ */
+#define	KERN_CONT	"<c>"
+
+extern int console_printk[];
+
+#define console_loglevel (console_printk[0])
+#define default_message_loglevel (console_printk[1])
+#define minimum_console_loglevel (console_printk[2])
+#define default_console_loglevel (console_printk[3])
+
+struct va_format {
+	const char *fmt;
+	va_list *va;
+};
+
+/*
+ * FW_BUG
+ * Add this to a message where you are sure the firmware is buggy or behaves
+ * really stupid or out of spec. Be aware that the responsible BIOS developer
+ * should be able to fix this issue or at least get a concrete idea of the
+ * problem by reading your message without the need of looking at the kernel
+ * code.
+ *
+ * Use it for definite and high priority BIOS bugs.
+ *
+ * FW_WARN
+ * Use it for not that clear (e.g. could the kernel messed up things already?)
+ * and medium priority BIOS bugs.
+ *
+ * FW_INFO
+ * Use this one if you want to tell the user or vendor about something
+ * suspicious, but generally harmless related to the firmware.
+ *
+ * Use it for information or very low priority BIOS bugs.
+ */
+#define FW_BUG		"[Firmware Bug]: "
+#define FW_WARN		"[Firmware Warn]: "
+#define FW_INFO		"[Firmware Info]: "
+
+/*
+ * HW_ERR
+ * Add this to a message for hardware errors, so that user can report
+ * it to hardware vendor instead of LKML or software vendor.
+ */
+#define HW_ERR		"[Hardware Error]: "
+
+#ifdef CONFIG_PRINTK
+asmlinkage int vprintk(const char *fmt, va_list args)
+	__attribute__ ((format (printf, 1, 0)));
+asmlinkage int printk(const char * fmt, ...)
+	__attribute__ ((format (printf, 1, 2))) __cold;
+
+/*
+ * Please don't use printk_ratelimit(), because it shares ratelimiting state
+ * with all other unrelated printk_ratelimit() callsites.  Instead use
+ * printk_ratelimited() or plain old __ratelimit().
+ */
+extern int __printk_ratelimit(const char *func);
+#define printk_ratelimit() __printk_ratelimit(__func__)
+extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+				   unsigned int interval_msec);
+
+extern int printk_delay_msec;
+extern int dmesg_restrict;
+
+/*
+ * Print a one-time message (analogous to WARN_ONCE() et al):
+ */
+#define printk_once(x...) ({			\
+	static bool __print_once;		\
+						\
+	if (!__print_once) {			\
+		__print_once = true;		\
+		printk(x);			\
+	}					\
+})
+
+void log_buf_kexec_setup(void);
+#else
+static inline int vprintk(const char *s, va_list args)
+	__attribute__ ((format (printf, 1, 0)));
+static inline int vprintk(const char *s, va_list args) { return 0; }
+static inline int printk(const char *s, ...)
+	__attribute__ ((format (printf, 1, 2)));
+static inline int __cold printk(const char *s, ...) { return 0; }
+static inline int printk_ratelimit(void) { return 0; }
+static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
+					  unsigned int interval_msec)	\
+		{ return false; }
+
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_once(x...) printk(x)
+
+static inline void log_buf_kexec_setup(void)
+{
+}
+#endif
+
+/*
+ * Dummy printk for disabled debugging statements to use whilst maintaining
+ * gcc's format and side-effect checking.
+ */
+static inline __attribute__ ((format (printf, 1, 2)))
+int no_printk(const char *s, ...) { return 0; }
+
+extern int printk_needs_cpu(int cpu);
+extern void printk_tick(void);
+
+extern void asmlinkage __attribute__((format(printf, 1, 2)))
+	early_printk(const char *fmt, ...);
+
+static inline void console_silent(void)
+{
+	console_loglevel = 0;
+}
+
+static inline void console_verbose(void)
+{
+	if (console_loglevel)
+		console_loglevel = 15;
+}
+
+extern void dump_stack(void) __cold;
+
+enum {
+	DUMP_PREFIX_NONE,
+	DUMP_PREFIX_ADDRESS,
+	DUMP_PREFIX_OFFSET
+};
+extern void hex_dump_to_buffer(const void *buf, size_t len,
+				int rowsize, int groupsize,
+				char *linebuf, size_t linebuflen, bool ascii);
+extern void print_hex_dump(const char *level, const char *prefix_str,
+				int prefix_type, int rowsize, int groupsize,
+				const void *buf, size_t len, bool ascii);
+extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
+			const void *buf, size_t len);
+
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
+#define pr_emerg(fmt, ...) \
+        printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert(fmt, ...) \
+        printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit(fmt, ...) \
+        printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err(fmt, ...) \
+        printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning(fmt, ...) \
+        printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn pr_warning
+#define pr_notice(fmt, ...) \
+        printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info(fmt, ...) \
+        printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_cont(fmt, ...) \
+	printk(KERN_CONT fmt, ##__VA_ARGS__)
+
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug(fmt, ...) \
+	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#elif defined(CONFIG_DYNAMIC_DEBUG)
+/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
+#define pr_debug(fmt, ...) \
+	dynamic_pr_debug(fmt, ##__VA_ARGS__)
+#else
+#define pr_debug(fmt, ...) \
+	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
+/*
+ * ratelimited messages with local ratelimit_state,
+ * no local ratelimit_state used in the !PRINTK case
+ */
+#ifdef CONFIG_PRINTK
+#define printk_ratelimited(fmt, ...)  ({				\
+	static DEFINE_RATELIMIT_STATE(_rs,				\
+				      DEFAULT_RATELIMIT_INTERVAL,	\
+				      DEFAULT_RATELIMIT_BURST);		\
+									\
+	if (__ratelimit(&_rs))						\
+		printk(fmt, ##__VA_ARGS__);				\
+})
+#else
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_ratelimited printk
+#endif
+
+#define pr_emerg_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn_ratelimited pr_warning_ratelimited
+#define pr_notice_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+/* no pr_cont_ratelimited, don't do that... */
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug_ratelimited(fmt, ...) \
+	({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
+				     ##__VA_ARGS__); 0; })
+#endif
+
+#endif

From dc6641be0ea8819ef095fdcefc2b695611999a21 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Mon, 15 Nov 2010 22:40:38 +0100
Subject: [PATCH 0621/1066] i2c: Remove obsolete cleanup for clientdata

A few new i2c-drivers came into the kernel which clear the clientdata-pointer
on exit. This is obsolete meanwhile, so fix it and hope the word will spread.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Alan Cox <alan@linux.intel.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/media/video/imx074.c          | 2 --
 drivers/media/video/ov6650.c          | 2 --
 drivers/misc/apds9802als.c            | 1 -
 drivers/staging/olpc_dcon/olpc_dcon.c | 3 ---
 4 files changed, 8 deletions(-)

diff --git a/drivers/media/video/imx074.c b/drivers/media/video/imx074.c
index 380e459f899d..27b5dfdfbb93 100644
--- a/drivers/media/video/imx074.c
+++ b/drivers/media/video/imx074.c
@@ -451,7 +451,6 @@ static int imx074_probe(struct i2c_client *client,
 	ret = imx074_video_probe(icd, client);
 	if (ret < 0) {
 		icd->ops = NULL;
-		i2c_set_clientdata(client, NULL);
 		kfree(priv);
 		return ret;
 	}
@@ -468,7 +467,6 @@ static int imx074_remove(struct i2c_client *client)
 	icd->ops = NULL;
 	if (icl->free_bus)
 		icl->free_bus(icl);
-	i2c_set_clientdata(client, NULL);
 	client->driver = NULL;
 	kfree(priv);
 
diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c
index 31f19373bbae..cf93de988068 100644
--- a/drivers/media/video/ov6650.c
+++ b/drivers/media/video/ov6650.c
@@ -1174,7 +1174,6 @@ static int ov6650_probe(struct i2c_client *client,
 
 	if (ret) {
 		icd->ops = NULL;
-		i2c_set_clientdata(client, NULL);
 		kfree(priv);
 	}
 
@@ -1185,7 +1184,6 @@ static int ov6650_remove(struct i2c_client *client)
 {
 	struct ov6650 *priv = to_ov6650(client);
 
-	i2c_set_clientdata(client, NULL);
 	kfree(priv);
 	return 0;
 }
diff --git a/drivers/misc/apds9802als.c b/drivers/misc/apds9802als.c
index 0ed09358027e..644d4cd071cc 100644
--- a/drivers/misc/apds9802als.c
+++ b/drivers/misc/apds9802als.c
@@ -251,7 +251,6 @@ static int apds9802als_probe(struct i2c_client *client,
 
 	return res;
 als_error1:
-	i2c_set_clientdata(client, NULL);
 	kfree(data);
 	return res;
 }
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c
index 75aa7a36307d..f286a4c56f66 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon.c
@@ -733,7 +733,6 @@ static int dcon_probe(struct i2c_client *client, const struct i2c_device_id *id)
  edev:
 	platform_device_unregister(dcon_device);
 	dcon_device = NULL;
-	i2c_set_clientdata(client, NULL);
  eirq:
 	free_irq(DCON_IRQ, &dcon_driver);
  einit:
@@ -757,8 +756,6 @@ static int dcon_remove(struct i2c_client *client)
 		platform_device_unregister(dcon_device);
 	cancel_work_sync(&dcon_work);
 
-	i2c_set_clientdata(client, NULL);
-
 	return 0;
 }
 

From dfdee5f00cc9ce21b0a7e786039bcfec26fbcb4b Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 15 Nov 2010 22:40:38 +0100
Subject: [PATCH 0622/1066] i2c: Delete unused adapter IDs

Delete unused I2C adapter IDs. Special cases are:

* I2C_HW_B_RIVA was still set in driver rivafb, however no other
  driver is ever looking for this value, so we can safely remove it.
* I2C_HW_B_HDPVR is used in staging driver lirc_zilog, however no
  adapter ID is ever set to this value, so the code in question never
  runs. As the code additionally expects that I2C_HW_B_HDPVR may not
  be defined, we can delete it now and let the lirc_zilog driver
  maintainer rewrite this piece of code.

Big thanks for Hans Verkuil for doing all the hard work :)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
---
 drivers/video/riva/rivafb-i2c.c |  1 -
 include/linux/i2c-id.h          | 22 ----------------------
 2 files changed, 23 deletions(-)

diff --git a/drivers/video/riva/rivafb-i2c.c b/drivers/video/riva/rivafb-i2c.c
index a0e22ac483a3..167400e2a182 100644
--- a/drivers/video/riva/rivafb-i2c.c
+++ b/drivers/video/riva/rivafb-i2c.c
@@ -94,7 +94,6 @@ static int __devinit riva_setup_i2c_bus(struct riva_i2c_chan *chan,
 
 	strcpy(chan->adapter.name, name);
 	chan->adapter.owner		= THIS_MODULE;
-	chan->adapter.id		= I2C_HW_B_RIVA;
 	chan->adapter.class		= i2c_class;
 	chan->adapter.algo_data		= &chan->algo;
 	chan->adapter.dev.parent	= &chan->par->pdev->dev;
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index e844a0b18695..4bef5c557160 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -32,28 +32,6 @@
  */
 
 /* --- Bit algorithm adapters						*/
-#define I2C_HW_B_BT848		0x010005 /* BT848 video boards */
-#define I2C_HW_B_RIVA		0x010010 /* Riva based graphics cards */
-#define I2C_HW_B_ZR36067	0x010019 /* Zoran-36057/36067 based boards */
 #define I2C_HW_B_CX2388x	0x01001b /* connexant 2388x based tv cards */
-#define I2C_HW_B_EM28XX		0x01001f /* em28xx video capture cards */
-#define I2C_HW_B_CX2341X	0x010020 /* Conexant CX2341X MPEG encoder cards */
-#define I2C_HW_B_CX23885	0x010022 /* conexant 23885 based tv cards (bus1) */
-#define I2C_HW_B_AU0828		0x010023 /* auvitek au0828 usb bridge */
-#define I2C_HW_B_CX231XX	0x010024 /* Conexant CX231XX USB based cards */
-#define I2C_HW_B_HDPVR		0x010025 /* Hauppauge HD PVR */
-
-/* --- SGI adapters							*/
-#define I2C_HW_SGI_VINO		0x160000
-
-/* --- SMBus only adapters						*/
-#define I2C_HW_SMBUS_W9968CF	0x04000d
-#define I2C_HW_SMBUS_OV511	0x04000e /* OV511(+) USB 1.1 webcam ICs */
-#define I2C_HW_SMBUS_OV518	0x04000f /* OV518(+) USB 1.1 webcam ICs */
-#define I2C_HW_SMBUS_CAFE	0x040012 /* Marvell 88ALP01 "CAFE" cam  */
-
-/* --- Miscellaneous adapters */
-#define I2C_HW_SAA7146		0x060000 /* SAA7146 video decoder bus */
-#define I2C_HW_SAA7134		0x090000 /* SAA7134 video decoder bus */
 
 #endif /* LINUX_I2C_ID_H */

From f3dc65dafa651bca6606ac0b41ead1be50d05652 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 15 Nov 2010 22:40:38 +0100
Subject: [PATCH 0623/1066] i2c: Drivers shouldn't include <linux/i2c-id.h>

Drivers don't need to include <linux/i2c-id.h>, especially not when
they don't use anything that header file provides.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Michael Hunold <michael@mihu.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/saa7146_i2c.c    | 1 -
 drivers/media/video/ir-kbd-i2c.c      | 1 -
 drivers/staging/olpc_dcon/olpc_dcon.c | 1 -
 3 files changed, 3 deletions(-)

diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c
index 3d88542612ea..74ee172b5bc9 100644
--- a/drivers/media/common/saa7146_i2c.c
+++ b/drivers/media/common/saa7146_i2c.c
@@ -391,7 +391,6 @@ static int saa7146_i2c_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, in
 
 /*****************************************************************************/
 /* i2c-adapter helper functions                                              */
-#include <linux/i2c-id.h>
 
 /* exported algorithm data */
 static struct i2c_algorithm saa7146_algo = {
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 5a000c65ae98..ce4a75375909 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -44,7 +44,6 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
-#include <linux/i2c-id.h>
 #include <linux/workqueue.h>
 
 #include <media/ir-core.h>
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c
index f286a4c56f66..4ca45ec7fd84 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon.c
@@ -17,7 +17,6 @@
 #include <linux/console.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
-#include <linux/i2c-id.h>
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
 #include <linux/interrupt.h>

From e1e18ee1cb58228a577668284c1dd03d859d7157 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 15 Nov 2010 22:40:38 +0100
Subject: [PATCH 0624/1066] i2c: Mark i2c_adapter.id as deprecated

It's about time to make it clear that i2c_adapter.id is deprecated.
Hopefully this will remind the last user to move over to a different
strategy.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
---
 Documentation/feature-removal-schedule.txt | 10 ++++++++++
 drivers/i2c/i2c-mux.c                      |  1 -
 include/linux/i2c.h                        |  2 +-
 3 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index d8f36f984faa..6c2f55e05f13 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -554,3 +554,13 @@ Why:    This is a legacy interface which have been replaced by a more
 Who:    NeilBrown <neilb@suse.de>
 
 ----------------------------
+
+What:	i2c_adapter.id
+When:	June 2011
+Why:	This field is deprecated. I2C device drivers shouldn't change their
+	behavior based on the underlying I2C adapter. Instead, the I2C
+	adapter driver should instantiate the I2C devices and provide the
+	needed platform-specific information.
+Who:	Jean Delvare <khali@linux-fr.org>
+
+----------------------------
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index d32a4843fc3a..d7a4833be416 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -120,7 +120,6 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
 	snprintf(priv->adap.name, sizeof(priv->adap.name),
 		 "i2c-%d-mux (chan_id %d)", i2c_adapter_id(parent), chan_id);
 	priv->adap.owner = THIS_MODULE;
-	priv->adap.id = parent->id;
 	priv->adap.algo = &priv->algo;
 	priv->adap.algo_data = priv;
 	priv->adap.dev.parent = &parent->dev;
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 889b35abaeda..56cfe23ffb39 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -353,7 +353,7 @@ struct i2c_algorithm {
  */
 struct i2c_adapter {
 	struct module *owner;
-	unsigned int id;
+	unsigned int id __deprecated;
 	unsigned int class;		  /* classes to allow probing for */
 	const struct i2c_algorithm *algo; /* the algorithm to access the bus */
 	void *algo_data;

From 2236baa75f704851d3cd3310569058151acb1f06 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 15 Nov 2010 22:40:38 +0100
Subject: [PATCH 0625/1066] i2c: Sanity checks on adapter registration

Make sure I2C adapters being registered have the required struct
fields set. If they don't, problems will happen later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/i2c/i2c-core.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index d231f683f576..6b4cc567645b 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -848,6 +848,18 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 		goto out_list;
 	}
 
+	/* Sanity checks */
+	if (unlikely(adap->name[0] == '\0')) {
+		pr_err("i2c-core: Attempt to register an adapter with "
+		       "no name!\n");
+		return -EINVAL;
+	}
+	if (unlikely(!adap->algo)) {
+		pr_err("i2c-core: Attempt to register adapter '%s' with "
+		       "no algo!\n", adap->name);
+		return -EINVAL;
+	}
+
 	rt_mutex_init(&adap->bus_lock);
 	mutex_init(&adap->userspace_clients_lock);
 	INIT_LIST_HEAD(&adap->userspace_clients);

From 00fafcda1773245a5292f953321ec3f0668c8c28 Mon Sep 17 00:00:00 2001
From: Colin Cross <ccross@android.com>
Date: Mon, 15 Nov 2010 22:45:22 +0100
Subject: [PATCH 0626/1066] PM / PM QoS: Fix reversed min and max

pm_qos_get_value had min and max reversed, causing all pm_qos
requests to have no effect.

Signed-off-by: Colin Cross <ccross@android.com>
Acked-by: mark <markgross@thegnar.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org
---
 kernel/pm_qos_params.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/pm_qos_params.c b/kernel/pm_qos_params.c
index c7a8f453919e..aeaa7f846821 100644
--- a/kernel/pm_qos_params.c
+++ b/kernel/pm_qos_params.c
@@ -121,10 +121,10 @@ static inline int pm_qos_get_value(struct pm_qos_object *o)
 
 	switch (o->type) {
 	case PM_QOS_MIN:
-		return plist_last(&o->requests)->prio;
+		return plist_first(&o->requests)->prio;
 
 	case PM_QOS_MAX:
-		return plist_first(&o->requests)->prio;
+		return plist_last(&o->requests)->prio;
 
 	default:
 		/* runtime check for not using enum */

From e502ac5e1eca99d7dc3f12b2a6780ccbca674858 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon, 15 Nov 2010 11:11:45 -0800
Subject: [PATCH 0627/1066] USB: atm: ueagle-atm: fix up some permissions on
 the sysfs files

Some of the sysfs files had the incorrect permissions.  Some didn't make
sense at all (writable for a file that you could not write to?)

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthieu Castet <castet.matthieu@free.fr>
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Damien Bergamini <damien.bergamini@free.fr>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/atm/ueagle-atm.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index ea071a5b6eee..44447f54942f 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -2301,7 +2301,7 @@ out:
 	return ret;
 }
 
-static DEVICE_ATTR(stat_status, S_IWUGO | S_IRUGO, read_status, reboot);
+static DEVICE_ATTR(stat_status, S_IWUSR | S_IRUGO, read_status, reboot);
 
 static ssize_t read_human_status(struct device *dev,
 			struct device_attribute *attr, char *buf)
@@ -2364,8 +2364,7 @@ out:
 	return ret;
 }
 
-static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO,
-				read_human_status, NULL);
+static DEVICE_ATTR(stat_human_status, S_IRUGO, read_human_status, NULL);
 
 static ssize_t read_delin(struct device *dev, struct device_attribute *attr,
 		char *buf)
@@ -2397,7 +2396,7 @@ out:
 	return ret;
 }
 
-static DEVICE_ATTR(stat_delin, S_IWUGO | S_IRUGO, read_delin, NULL);
+static DEVICE_ATTR(stat_delin, S_IRUGO, read_delin, NULL);
 
 #define UEA_ATTR(name, reset)					\
 								\

From 723b991a62d94f74c9f19abd3da6e937288eb969 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon, 15 Nov 2010 11:15:11 -0800
Subject: [PATCH 0628/1066] USB: ehci: fix debugfs 'lpm' permissions

The permissions for the lpm debugfs file is incorrect, this fixes it.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alek Du <alek.du@intel.com>
Cc: Jacob Pan <jacob.jun.pan@intel.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/host/ehci-dbg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 86afdc73322f..6e2599661b5b 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -1067,7 +1067,7 @@ static inline void create_debug_files (struct ehci_hcd *ehci)
 						    &debug_registers_fops))
 		goto file_error;
 
-	if (!debugfs_create_file("lpm", S_IRUGO|S_IWUGO, ehci->debug_dir, bus,
+	if (!debugfs_create_file("lpm", S_IRUGO|S_IWUSR, ehci->debug_dir, bus,
 						    &debug_lpm_fops))
 		goto file_error;
 

From d9624e75f6ad94d8a0718c1fafa89186d271a78c Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon, 15 Nov 2010 11:17:52 -0800
Subject: [PATCH 0629/1066] USB: storage: sierra_ms: fix sysfs file attribute

A non-writable sysfs file shouldn't have writable attributes.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kevin Lloyd <klloyd@sierrawireless.com>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/storage/sierra_ms.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
index 57fc2f532cab..ceba512f84d0 100644
--- a/drivers/usb/storage/sierra_ms.c
+++ b/drivers/usb/storage/sierra_ms.c
@@ -121,7 +121,7 @@ static ssize_t show_truinst(struct device *dev, struct device_attribute *attr,
 	}
 	return result;
 }
-static DEVICE_ATTR(truinst, S_IWUGO | S_IRUGO, show_truinst, NULL);
+static DEVICE_ATTR(truinst, S_IRUGO, show_truinst, NULL);
 
 int sierra_ms_init(struct us_data *us)
 {

From c990600d340641150f7270470a64bd99a5c0b225 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon, 15 Nov 2010 11:32:38 -0800
Subject: [PATCH 0630/1066] USB: misc: cypress_cy7c63: fix up some sysfs
 attribute permissions

They should not be writable by any user.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oliver Bock <bock@tfh-berlin.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/misc/cypress_cy7c63.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
index 2f43c57743c9..9251773ecef4 100644
--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -196,11 +196,9 @@ static ssize_t get_port1_handler(struct device *dev,
 	return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
 }
 
-static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO,
-		   get_port0_handler, set_port0_handler);
+static DEVICE_ATTR(port0, S_IRUGO | S_IWUSR, get_port0_handler, set_port0_handler);
 
-static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO,
-		   get_port1_handler, set_port1_handler);
+static DEVICE_ATTR(port1, S_IRUGO | S_IWUSR, get_port1_handler, set_port1_handler);
 
 
 static int cypress_probe(struct usb_interface *interface,

From d489a4b3926bad571d404ca6508f6744b9602776 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon, 15 Nov 2010 11:34:26 -0800
Subject: [PATCH 0631/1066] USB: misc: trancevibrator: fix up a sysfs attribute
 permission

It should not be writable by any user.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sam Hocevar <sam@zoy.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/misc/trancevibrator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c
index d77aba46ae85..f63776a48e2a 100644
--- a/drivers/usb/misc/trancevibrator.c
+++ b/drivers/usb/misc/trancevibrator.c
@@ -86,7 +86,7 @@ static ssize_t set_speed(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
-static DEVICE_ATTR(speed, S_IWUGO | S_IRUGO, show_speed, set_speed);
+static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR, show_speed, set_speed);
 
 static int tv_probe(struct usb_interface *interface,
 		    const struct usb_device_id *id)

From 48f115470e68d443436b76b22dad63ffbffd6b97 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon, 15 Nov 2010 11:35:49 -0800
Subject: [PATCH 0632/1066] USB: misc: usbled: fix up some sysfs attribute
 permissions

They should not be writable by any user.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/misc/usbled.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
index 63da2c3c838f..c96f51de1696 100644
--- a/drivers/usb/misc/usbled.c
+++ b/drivers/usb/misc/usbled.c
@@ -94,7 +94,7 @@ static ssize_t set_##value(struct device *dev, struct device_attribute *attr, co
 	change_color(led);						\
 	return count;							\
 }									\
-static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value);
+static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, show_##value, set_##value);
 show_set(blue);
 show_set(red);
 show_set(green);

From e24d7ace4e822debcb78386bf279c9aba4d7fbd1 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon, 15 Nov 2010 11:36:44 -0800
Subject: [PATCH 0633/1066] USB: misc: usbsevseg: fix up some sysfs attribute
 permissions

They should not be writable by any user.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Harrison Metzger <harrisonmetz@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/misc/usbsevseg.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index de8ef945b536..417b8f207e8b 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -192,7 +192,7 @@ static ssize_t set_attr_##name(struct device *dev, 		\
 								\
 	return count;						\
 }								\
-static DEVICE_ATTR(name, S_IWUGO | S_IRUGO, show_attr_##name, set_attr_##name);
+static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_attr_##name, set_attr_##name);
 
 static ssize_t show_attr_text(struct device *dev,
 	struct device_attribute *attr, char *buf)
@@ -223,7 +223,7 @@ static ssize_t set_attr_text(struct device *dev,
 	return count;
 }
 
-static DEVICE_ATTR(text, S_IWUGO | S_IRUGO, show_attr_text, set_attr_text);
+static DEVICE_ATTR(text, S_IRUGO | S_IWUSR, show_attr_text, set_attr_text);
 
 static ssize_t show_attr_decimals(struct device *dev,
 	struct device_attribute *attr, char *buf)
@@ -272,8 +272,7 @@ static ssize_t set_attr_decimals(struct device *dev,
 	return count;
 }
 
-static DEVICE_ATTR(decimals, S_IWUGO | S_IRUGO,
-	show_attr_decimals, set_attr_decimals);
+static DEVICE_ATTR(decimals, S_IRUGO | S_IWUSR, show_attr_decimals, set_attr_decimals);
 
 static ssize_t show_attr_textmode(struct device *dev,
 	struct device_attribute *attr, char *buf)
@@ -319,8 +318,7 @@ static ssize_t set_attr_textmode(struct device *dev,
 	return -EINVAL;
 }
 
-static DEVICE_ATTR(textmode, S_IWUGO | S_IRUGO,
-	show_attr_textmode, set_attr_textmode);
+static DEVICE_ATTR(textmode, S_IRUGO | S_IWUSR, show_attr_textmode, set_attr_textmode);
 
 
 MYDEV_ATTR_SIMPLE_UNSIGNED(powered, update_display_powered);

From 3d965875144b905d71dfb4d291c665c0794222c4 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon, 15 Nov 2010 11:37:55 -0800
Subject: [PATCH 0634/1066] USB: OTG: langwell_otg: fix up some sysfs attribute
 permissions

They should not be writable by any user.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Hao Wu <hao.wu@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Alek Du <alek.du@intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/otg/langwell_otg.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
index bdc3ea66be69..9fea48264fa2 100644
--- a/drivers/usb/otg/langwell_otg.c
+++ b/drivers/usb/otg/langwell_otg.c
@@ -1896,7 +1896,7 @@ set_a_bus_req(struct device *dev, struct device_attribute *attr,
 	}
 	return count;
 }
-static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req);
+static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, set_a_bus_req);
 
 static ssize_t
 get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1942,8 +1942,7 @@ set_a_bus_drop(struct device *dev, struct device_attribute *attr,
 	}
 	return count;
 }
-static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO,
-	get_a_bus_drop, set_a_bus_drop);
+static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, get_a_bus_drop, set_a_bus_drop);
 
 static ssize_t
 get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1988,7 +1987,7 @@ set_b_bus_req(struct device *dev, struct device_attribute *attr,
 	}
 	return count;
 }
-static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req);
+static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUSR, get_b_bus_req, set_b_bus_req);
 
 static ssize_t
 set_a_clr_err(struct device *dev, struct device_attribute *attr,
@@ -2012,7 +2011,7 @@ set_a_clr_err(struct device *dev, struct device_attribute *attr,
 	}
 	return count;
 }
-static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err);
+static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err);
 
 static struct attribute *inputs_attrs[] = {
 	&dev_attr_a_bus_req.attr,

From 12b3052c3ee8f508b2c7ee4ddd63ed03423409d8 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Mon, 15 Nov 2010 18:36:29 -0500
Subject: [PATCH 0635/1066] capabilities/syslog: open code cap_syslog logic to
 fix build failure

The addition of CONFIG_SECURITY_DMESG_RESTRICT resulted in a build
failure when CONFIG_PRINTK=n.  This is because the capabilities code
which used the new option was built even though the variable in question
didn't exist.

The patch here fixes this by moving the capabilities checks out of the
LSM and into the caller.  All (known) LSMs should have been calling the
capabilities hook already so it actually makes the code organization
better to eliminate the hook altogether.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/security.h   |  9 ++++-----
 kernel/printk.c            | 15 ++++++++++++++-
 security/capability.c      |  5 +++++
 security/commoncap.c       | 21 ---------------------
 security/security.c        |  4 ++--
 security/selinux/hooks.c   |  6 +-----
 security/smack/smack_lsm.c |  8 ++------
 7 files changed, 28 insertions(+), 40 deletions(-)

diff --git a/include/linux/security.h b/include/linux/security.h
index b8246a8df7d2..fd4d55fb8845 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -77,7 +77,6 @@ extern int cap_task_prctl(int option, unsigned long arg2, unsigned long arg3,
 extern int cap_task_setscheduler(struct task_struct *p);
 extern int cap_task_setioprio(struct task_struct *p, int ioprio);
 extern int cap_task_setnice(struct task_struct *p, int nice);
-extern int cap_syslog(int type, bool from_file);
 extern int cap_vm_enough_memory(struct mm_struct *mm, long pages);
 
 struct msghdr;
@@ -1388,7 +1387,7 @@ struct security_operations {
 	int (*sysctl) (struct ctl_table *table, int op);
 	int (*quotactl) (int cmds, int type, int id, struct super_block *sb);
 	int (*quota_on) (struct dentry *dentry);
-	int (*syslog) (int type, bool from_file);
+	int (*syslog) (int type);
 	int (*settime) (struct timespec *ts, struct timezone *tz);
 	int (*vm_enough_memory) (struct mm_struct *mm, long pages);
 
@@ -1671,7 +1670,7 @@ int security_real_capable_noaudit(struct task_struct *tsk, int cap);
 int security_sysctl(struct ctl_table *table, int op);
 int security_quotactl(int cmds, int type, int id, struct super_block *sb);
 int security_quota_on(struct dentry *dentry);
-int security_syslog(int type, bool from_file);
+int security_syslog(int type);
 int security_settime(struct timespec *ts, struct timezone *tz);
 int security_vm_enough_memory(long pages);
 int security_vm_enough_memory_mm(struct mm_struct *mm, long pages);
@@ -1901,9 +1900,9 @@ static inline int security_quota_on(struct dentry *dentry)
 	return 0;
 }
 
-static inline int security_syslog(int type, bool from_file)
+static inline int security_syslog(int type)
 {
-	return cap_syslog(type, from_file);
+	return 0;
 }
 
 static inline int security_settime(struct timespec *ts, struct timezone *tz)
diff --git a/kernel/printk.c b/kernel/printk.c
index 38e7d5868d60..9a2264fc42ca 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -274,7 +274,20 @@ int do_syslog(int type, char __user *buf, int len, bool from_file)
 	char c;
 	int error = 0;
 
-	error = security_syslog(type, from_file);
+	/*
+	 * If this is from /proc/kmsg we only do the capabilities checks
+	 * at open time.
+	 */
+	if (type == SYSLOG_ACTION_OPEN || !from_file) {
+		if (dmesg_restrict && !capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		if ((type != SYSLOG_ACTION_READ_ALL &&
+		     type != SYSLOG_ACTION_SIZE_BUFFER) &&
+		    !capable(CAP_SYS_ADMIN))
+			return -EPERM;
+	}
+
+	error = security_syslog(type);
 	if (error)
 		return error;
 
diff --git a/security/capability.c b/security/capability.c
index 30ae00fbecd5..c773635ca3a0 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -17,6 +17,11 @@ static int cap_sysctl(ctl_table *table, int op)
 	return 0;
 }
 
+static int cap_syslog(int type)
+{
+	return 0;
+}
+
 static int cap_quotactl(int cmds, int type, int id, struct super_block *sb)
 {
 	return 0;
diff --git a/security/commoncap.c b/security/commoncap.c
index 04b80f9912bf..64c2ed9c9015 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -27,7 +27,6 @@
 #include <linux/sched.h>
 #include <linux/prctl.h>
 #include <linux/securebits.h>
-#include <linux/syslog.h>
 
 /*
  * If a non-root user executes a setuid-root binary in
@@ -883,26 +882,6 @@ error:
 	return error;
 }
 
-/**
- * cap_syslog - Determine whether syslog function is permitted
- * @type: Function requested
- * @from_file: Whether this request came from an open file (i.e. /proc)
- *
- * Determine whether the current process is permitted to use a particular
- * syslog function, returning 0 if permission is granted, -ve if not.
- */
-int cap_syslog(int type, bool from_file)
-{
-	if (type != SYSLOG_ACTION_OPEN && from_file)
-		return 0;
-	if (dmesg_restrict && !capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	if ((type != SYSLOG_ACTION_READ_ALL &&
-	     type != SYSLOG_ACTION_SIZE_BUFFER) && !capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	return 0;
-}
-
 /**
  * cap_vm_enough_memory - Determine whether a new virtual mapping is permitted
  * @mm: The VM space in which the new mapping is to be made
diff --git a/security/security.c b/security/security.c
index 3ef5e2a7a741..1b798d3df710 100644
--- a/security/security.c
+++ b/security/security.c
@@ -197,9 +197,9 @@ int security_quota_on(struct dentry *dentry)
 	return security_ops->quota_on(dentry);
 }
 
-int security_syslog(int type, bool from_file)
+int security_syslog(int type)
 {
-	return security_ops->syslog(type, from_file);
+	return security_ops->syslog(type);
 }
 
 int security_settime(struct timespec *ts, struct timezone *tz)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index d9154cf90ae1..65fa8bf596f5 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -1973,14 +1973,10 @@ static int selinux_quota_on(struct dentry *dentry)
 	return dentry_has_perm(cred, NULL, dentry, FILE__QUOTAON);
 }
 
-static int selinux_syslog(int type, bool from_file)
+static int selinux_syslog(int type)
 {
 	int rc;
 
-	rc = cap_syslog(type, from_file);
-	if (rc)
-		return rc;
-
 	switch (type) {
 	case SYSLOG_ACTION_READ_ALL:	/* Read last kernel messages */
 	case SYSLOG_ACTION_SIZE_BUFFER:	/* Return size of the log buffer */
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index bc39f4067af6..489a85afa477 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -157,15 +157,11 @@ static int smack_ptrace_traceme(struct task_struct *ptp)
  *
  * Returns 0 on success, error code otherwise.
  */
-static int smack_syslog(int type, bool from_file)
+static int smack_syslog(int typefrom_file)
 {
-	int rc;
+	int rc = 0;
 	char *sp = current_security();
 
-	rc = cap_syslog(type, from_file);
-	if (rc != 0)
-		return rc;
-
 	if (capable(CAP_MAC_OVERRIDE))
 		return 0;
 

From cc267ec5dfa29eba34cbf4eae3e5db9ca499c179 Mon Sep 17 00:00:00 2001
From: Arnd Hannemann <arnd@arndnet.de>
Date: Mon, 15 Nov 2010 21:43:22 +0000
Subject: [PATCH 0636/1066] fbdev: sh_mobile_lcdcfb: fix bug in reconfig()

The function sh_mobile_fb_reconfig() contained a bug,
which caused the line_length to be set wrongly, if a mode
with a different X-resolution than the default one was chosen.
This caused 1080p24 mode to not work on AP4EVB.
Additionally the notifier chain was also called with the wrong
mode.

This patch fixes this, by using the X-resolution of the new
mode instead of the old one to calculate line length and
hands over the correct mode to the notifier chain.

Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sh_mobile_lcdcfb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 9b1364723c65..b02d97a879d6 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -860,7 +860,7 @@ static void sh_mobile_fb_reconfig(struct fb_info *info)
 		/* Couldn't reconfigure, hopefully, can continue as before */
 		return;
 
-	info->fix.line_length = mode2.xres * (ch->cfg.bpp / 8);
+	info->fix.line_length = mode1.xres * (ch->cfg.bpp / 8);
 
 	/*
 	 * fb_set_var() calls the notifier change internally, only if
@@ -868,7 +868,7 @@ static void sh_mobile_fb_reconfig(struct fb_info *info)
 	 * user event, we have to call the chain ourselves.
 	 */
 	event.info = info;
-	event.data = &mode2;
+	event.data = &mode1;
 	fb_notifier_call_chain(evnt, &event);
 }
 

From e3a4d1d2de7251d4a00b04f50f6b3d2a1fc0fe5f Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Mon, 15 Nov 2010 05:03:13 -0500
Subject: [PATCH 0637/1066] fbdev: da8xx: punt duplicated FBIO_WAITFORVSYNC
 define

This is already defined by linux/fb.h now, so punt the duplicate
definition from the driver header.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 include/video/da8xx-fb.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/include/video/da8xx-fb.h b/include/video/da8xx-fb.h
index 6316cdabf73f..89d43b3d4cb9 100644
--- a/include/video/da8xx-fb.h
+++ b/include/video/da8xx-fb.h
@@ -99,7 +99,6 @@ struct lcd_sync_arg {
 #define FBIPUT_COLOR		_IOW('F', 6, int)
 #define FBIPUT_HSYNC		_IOW('F', 9, int)
 #define FBIPUT_VSYNC		_IOW('F', 10, int)
-#define FBIO_WAITFORVSYNC	_IOW('F', 0x20, u_int32_t)
 
 #endif  /* ifndef DA8XX_FB_H */
 

From 8e35f8e7c61c88f9a979a4e6f7f4ffd4c158a88a Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Tue, 2 Nov 2010 09:11:55 -0400
Subject: [PATCH 0638/1066] NLM: Fix a regression in lockd

Nick Bowler reports:
There are no unusual messages on the client... but I just logged into
the server and I see lots of messages of the following form:

  nfsd: request from insecure port (192.168.8.199:35766)!
  nfsd: request from insecure port (192.168.8.199:35766)!
  nfsd: request from insecure port (192.168.8.199:35766)!
  nfsd: request from insecure port (192.168.8.199:35766)!
  nfsd: request from insecure port (192.168.8.199:35766)!

Bisected to commit 9247685088398cf21bcb513bd2832b4cd42516c4 (SUNRPC:
Properly initialize sock_xprt.srcaddr in all cases)

Apparently, removing the 'transport->srcaddr.ss_family = family' from
xs_create_sock() triggers this due to nlmclnt_lookup_host() incorrectly
initialising the srcaddr family to AF_UNSPEC.

Reported-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/lockd/host.c             | 11 ++++-------
 include/linux/lockd/lockd.h |  1 +
 2 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/fs/lockd/host.c b/fs/lockd/host.c
index 25e21e4023b2..ed0c59fe23ce 100644
--- a/fs/lockd/host.c
+++ b/fs/lockd/host.c
@@ -124,7 +124,7 @@ static struct nlm_host *nlm_lookup_host(struct nlm_lookup_host_info *ni)
 			continue;
 		if (host->h_server != ni->server)
 			continue;
-		if (ni->server &&
+		if (ni->server && ni->src_len != 0 &&
 		    !rpc_cmp_addr(nlm_srcaddr(host), ni->src_sap))
 			continue;
 
@@ -167,6 +167,7 @@ static struct nlm_host *nlm_lookup_host(struct nlm_lookup_host_info *ni)
 	host->h_addrlen = ni->salen;
 	rpc_set_port(nlm_addr(host), 0);
 	memcpy(nlm_srcaddr(host), ni->src_sap, ni->src_len);
+	host->h_srcaddrlen = ni->src_len;
 	host->h_version    = ni->version;
 	host->h_proto      = ni->protocol;
 	host->h_rpcclnt    = NULL;
@@ -238,9 +239,6 @@ struct nlm_host *nlmclnt_lookup_host(const struct sockaddr *sap,
 				     const char *hostname,
 				     int noresvport)
 {
-	const struct sockaddr source = {
-		.sa_family	= AF_UNSPEC,
-	};
 	struct nlm_lookup_host_info ni = {
 		.server		= 0,
 		.sap		= sap,
@@ -249,8 +247,6 @@ struct nlm_host *nlmclnt_lookup_host(const struct sockaddr *sap,
 		.version	= version,
 		.hostname	= hostname,
 		.hostname_len	= strlen(hostname),
-		.src_sap	= &source,
-		.src_len	= sizeof(source),
 		.noresvport	= noresvport,
 	};
 
@@ -357,7 +353,6 @@ nlm_bind_host(struct nlm_host *host)
 			.protocol	= host->h_proto,
 			.address	= nlm_addr(host),
 			.addrsize	= host->h_addrlen,
-			.saddress	= nlm_srcaddr(host),
 			.timeout	= &timeparms,
 			.servername	= host->h_name,
 			.program	= &nlm_program,
@@ -376,6 +371,8 @@ nlm_bind_host(struct nlm_host *host)
 			args.flags |= RPC_CLNT_CREATE_HARDRTRY;
 		if (host->h_noresvport)
 			args.flags |= RPC_CLNT_CREATE_NONPRIVPORT;
+		if (host->h_srcaddrlen)
+			args.saddress = nlm_srcaddr(host);
 
 		clnt = rpc_create(&args);
 		if (!IS_ERR(clnt))
diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h
index a34dea46b629..2dee05e5119a 100644
--- a/include/linux/lockd/lockd.h
+++ b/include/linux/lockd/lockd.h
@@ -43,6 +43,7 @@ struct nlm_host {
 	struct sockaddr_storage	h_addr;		/* peer address */
 	size_t			h_addrlen;
 	struct sockaddr_storage	h_srcaddr;	/* our address (optional) */
+	size_t			h_srcaddrlen;
 	struct rpc_clnt		*h_rpcclnt;	/* RPC client to talk to peer */
 	char			*h_name;		/* remote hostname */
 	u32			h_version;	/* interface version */

From 1e657bd51f313d87fbbb22d1edf625dba87ef353 Mon Sep 17 00:00:00 2001
From: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Date: Sun, 31 Oct 2010 18:21:05 +0200
Subject: [PATCH 0639/1066] Regression: fix mounting NFS when NFSv3 support is
 not compiled

Trying to mount NFS (root partition in my case) fails if CONFIG_NFS_V3
is not selected. nfs_validate_mount_data() returns EPROTONOSUPPORT,
because of this check:

#ifndef CONFIG_NFS_V3
	if (args->version == 3)
		goto out_v3_not_compiled;
#endif /* !CONFIG_NFS_V3 */

and args->version was always initialized to 3.

It was working in 2.6.36

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/super.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 0a42e8f4adcb..9587506d493c 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -67,6 +67,12 @@
 
 #define NFSDBG_FACILITY		NFSDBG_VFS
 
+#ifdef CONFIG_NFS_V3
+#define NFS_DEFAULT_VERSION 3
+#else
+#define NFS_DEFAULT_VERSION 2
+#endif
+
 enum {
 	/* Mount options that take no arguments */
 	Opt_soft, Opt_hard,
@@ -2277,7 +2283,7 @@ static int nfs_get_sb(struct file_system_type *fs_type,
 	};
 	int error = -ENOMEM;
 
-	data = nfs_alloc_parsed_mount_data(3);
+	data = nfs_alloc_parsed_mount_data(NFS_DEFAULT_VERSION);
 	mntfh = nfs_alloc_fhandle();
 	if (data == NULL || mntfh == NULL)
 		goto out_free_fh;

From 23ebbd9acf5756b6eb783df84403e3ab668a6bce Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Wed, 3 Nov 2010 10:24:16 -0400
Subject: [PATCH 0640/1066] Revert "NFSv4: Fall back to ordinary lookup if
 nfs4_atomic_open() returns EISDIR"

This reverts commit 80e60639f1b7c121a7fea53920c5a4b94009361a.

This change requires further fixes to ensure that the open doesn't
succeed if the lookup later results in a regular file being created.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/dir.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 07ac3847e562..635ff65d3092 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1345,12 +1345,12 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry
 				res = NULL;
 				goto out;
 			/* This turned out not to be a regular file */
-			case -EISDIR:
 			case -ENOTDIR:
 				goto no_open;
 			case -ELOOP:
 				if (!(nd->intent.open.flags & O_NOFOLLOW))
 					goto no_open;
+			/* case -EISDIR: */
 			/* case -EINVAL: */
 			default:
 				res = ERR_CAST(inode);

From 8cd51a0ccd1beda4482507769887c0be9d70f8c1 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Mon, 15 Nov 2010 20:26:22 -0500
Subject: [PATCH 0641/1066] NFS: Fix a couple of regressions in readdir.

Fix up the issue that array->eof_index needs to be able to be set
even if array->size == 0.

Ensure that we catch all important memory allocation error conditions
and/or kmap() failures.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/dir.c | 90 ++++++++++++++++++++++++++++++++--------------------
 1 file changed, 56 insertions(+), 34 deletions(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 635ff65d3092..c6ce8af266ed 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -194,9 +194,13 @@ typedef struct {
 static
 struct nfs_cache_array *nfs_readdir_get_array(struct page *page)
 {
+	void *ptr;
 	if (page == NULL)
 		return ERR_PTR(-EIO);
-	return (struct nfs_cache_array *)kmap(page);
+	ptr = kmap(page);
+	if (ptr == NULL)
+		return ERR_PTR(-ENOMEM);
+	return ptr;
 }
 
 static
@@ -213,6 +217,9 @@ int nfs_readdir_clear_array(struct page *page, gfp_t mask)
 {
 	struct nfs_cache_array *array = nfs_readdir_get_array(page);
 	int i;
+
+	if (IS_ERR(array))
+		return PTR_ERR(array);
 	for (i = 0; i < array->size; i++)
 		kfree(array->array[i].string.name);
 	nfs_readdir_release_array(page);
@@ -244,7 +251,7 @@ int nfs_readdir_add_to_array(struct nfs_entry *entry, struct page *page)
 
 	if (IS_ERR(array))
 		return PTR_ERR(array);
-	ret = -EIO;
+	ret = -ENOSPC;
 	if (array->size >= MAX_READDIR_ARRAY)
 		goto out;
 
@@ -255,9 +262,9 @@ int nfs_readdir_add_to_array(struct nfs_entry *entry, struct page *page)
 	if (ret)
 		goto out;
 	array->last_cookie = entry->cookie;
+	array->size++;
 	if (entry->eof == 1)
 		array->eof_index = array->size;
-	array->size++;
 out:
 	nfs_readdir_release_array(page);
 	return ret;
@@ -272,7 +279,7 @@ int nfs_readdir_search_for_pos(struct nfs_cache_array *array, nfs_readdir_descri
 	if (diff < 0)
 		goto out_eof;
 	if (diff >= array->size) {
-		if (array->eof_index > 0)
+		if (array->eof_index >= 0)
 			goto out_eof;
 		desc->current_index += array->size;
 		return -EAGAIN;
@@ -281,8 +288,6 @@ int nfs_readdir_search_for_pos(struct nfs_cache_array *array, nfs_readdir_descri
 	index = (unsigned int)diff;
 	*desc->dir_cookie = array->array[index].cookie;
 	desc->cache_entry_index = index;
-	if (index == array->eof_index)
-		desc->eof = 1;
 	return 0;
 out_eof:
 	desc->eof = 1;
@@ -296,17 +301,17 @@ int nfs_readdir_search_for_cookie(struct nfs_cache_array *array, nfs_readdir_des
 	int status = -EAGAIN;
 
 	for (i = 0; i < array->size; i++) {
-		if (i == array->eof_index) {
-			desc->eof = 1;
-			status = -EBADCOOKIE;
-		}
 		if (array->array[i].cookie == *desc->dir_cookie) {
 			desc->cache_entry_index = i;
 			status = 0;
-			break;
+			goto out;
 		}
 	}
-
+	if (i == array->eof_index) {
+		desc->eof = 1;
+		status = -EBADCOOKIE;
+	}
+out:
 	return status;
 }
 
@@ -449,7 +454,7 @@ out:
 
 /* Perform conversion from xdr to cache array */
 static
-void nfs_readdir_page_filler(nfs_readdir_descriptor_t *desc, struct nfs_entry *entry,
+int nfs_readdir_page_filler(nfs_readdir_descriptor_t *desc, struct nfs_entry *entry,
 				void *xdr_page, struct page *page, unsigned int buflen)
 {
 	struct xdr_stream stream;
@@ -471,21 +476,29 @@ void nfs_readdir_page_filler(nfs_readdir_descriptor_t *desc, struct nfs_entry *e
 
 	do {
 		status = xdr_decode(desc, entry, &stream);
-		if (status != 0)
+		if (status != 0) {
+			if (status == -EAGAIN)
+				status = 0;
 			break;
+		}
 
-		if (nfs_readdir_add_to_array(entry, page) == -1)
-			break;
 		if (desc->plus == 1)
 			nfs_prime_dcache(desc->file->f_path.dentry, entry);
+
+		status = nfs_readdir_add_to_array(entry, page);
+		if (status != 0)
+			break;
 	} while (!entry->eof);
 
 	if (status == -EBADCOOKIE && entry->eof) {
 		array = nfs_readdir_get_array(page);
-		array->eof_index = array->size - 1;
-		status = 0;
-		nfs_readdir_release_array(page);
+		if (!IS_ERR(array)) {
+			array->eof_index = array->size;
+			status = 0;
+			nfs_readdir_release_array(page);
+		}
 	}
+	return status;
 }
 
 static
@@ -537,7 +550,7 @@ int nfs_readdir_xdr_to_array(nfs_readdir_descriptor_t *desc, struct page *page,
 	struct nfs_entry entry;
 	struct file	*file = desc->file;
 	struct nfs_cache_array *array;
-	int status = 0;
+	int status = -ENOMEM;
 	unsigned int array_size = ARRAY_SIZE(pages);
 
 	entry.prev_cookie = 0;
@@ -549,6 +562,10 @@ int nfs_readdir_xdr_to_array(nfs_readdir_descriptor_t *desc, struct page *page,
 		goto out;
 
 	array = nfs_readdir_get_array(page);
+	if (IS_ERR(array)) {
+		status = PTR_ERR(array);
+		goto out;
+	}
 	memset(array, 0, sizeof(struct nfs_cache_array));
 	array->eof_index = -1;
 
@@ -560,8 +577,13 @@ int nfs_readdir_xdr_to_array(nfs_readdir_descriptor_t *desc, struct page *page,
 
 		if (status < 0)
 			break;
-		nfs_readdir_page_filler(desc, &entry, pages_ptr, page, array_size * PAGE_SIZE);
-	} while (array->eof_index < 0 && array->size < MAX_READDIR_ARRAY);
+		status = nfs_readdir_page_filler(desc, &entry, pages_ptr, page, array_size * PAGE_SIZE);
+		if (status < 0) {
+			if (status == -ENOSPC)
+				status = 0;
+			break;
+		}
+	} while (array->eof_index < 0);
 
 	nfs_readdir_free_large_page(pages_ptr, pages, array_size);
 out_release_array:
@@ -582,8 +604,10 @@ static
 int nfs_readdir_filler(nfs_readdir_descriptor_t *desc, struct page* page)
 {
 	struct inode	*inode = desc->file->f_path.dentry->d_inode;
+	int ret;
 
-	if (nfs_readdir_xdr_to_array(desc, page, inode) < 0)
+	ret = nfs_readdir_xdr_to_array(desc, page, inode);
+	if (ret < 0)
 		goto error;
 	SetPageUptodate(page);
 
@@ -595,7 +619,7 @@ int nfs_readdir_filler(nfs_readdir_descriptor_t *desc, struct page* page)
 	return 0;
  error:
 	unlock_page(page);
-	return -EIO;
+	return ret;
 }
 
 static
@@ -608,12 +632,8 @@ void cache_page_release(nfs_readdir_descriptor_t *desc)
 static
 struct page *get_cache_page(nfs_readdir_descriptor_t *desc)
 {
-	struct page *page;
-	page = read_cache_page(desc->file->f_path.dentry->d_inode->i_mapping,
+	return read_cache_page(desc->file->f_path.dentry->d_inode->i_mapping,
 			desc->page_index, (filler_t *)nfs_readdir_filler, desc);
-	if (IS_ERR(page))
-		desc->eof = 1;
-	return page;
 }
 
 /*
@@ -639,8 +659,10 @@ int find_cache_page(nfs_readdir_descriptor_t *desc)
 static inline
 int readdir_search_pagecache(nfs_readdir_descriptor_t *desc)
 {
-	int res = -EAGAIN;
+	int res;
 
+	if (desc->page_index == 0)
+		desc->current_index = 0;
 	while (1) {
 		res = find_cache_page(desc);
 		if (res != -EAGAIN)
@@ -670,6 +692,8 @@ int nfs_do_filldir(nfs_readdir_descriptor_t *desc, void *dirent,
 	struct dentry *dentry = NULL;
 
 	array = nfs_readdir_get_array(desc->page);
+	if (IS_ERR(array))
+		return PTR_ERR(array);
 
 	for (i = desc->cache_entry_index; i < array->size; i++) {
 		d_type = DT_UNKNOWN;
@@ -685,11 +709,9 @@ int nfs_do_filldir(nfs_readdir_descriptor_t *desc, void *dirent,
 			*desc->dir_cookie = array->array[i+1].cookie;
 		else
 			*desc->dir_cookie = array->last_cookie;
-		if (i == array->eof_index) {
-			desc->eof = 1;
-			break;
-		}
 	}
+	if (i == array->eof_index)
+		desc->eof = 1;
 
 	nfs_readdir_release_array(desc->page);
 	cache_page_release(desc);

From ac39612824e1fad8baf82c2841e42b2142af3445 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Mon, 15 Nov 2010 20:26:22 -0500
Subject: [PATCH 0642/1066] NFS: readdir shouldn't read beyond the reply
 returned by the server

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/dir.c      | 4 +++-
 fs/nfs/nfs2xdr.c  | 4 ++--
 fs/nfs/nfs3xdr.c  | 4 ++--
 fs/nfs/nfs4proc.c | 4 +++-
 fs/nfs/nfs4xdr.c  | 2 +-
 5 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index c6ce8af266ed..c9196c9cf5a6 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -573,11 +573,13 @@ int nfs_readdir_xdr_to_array(nfs_readdir_descriptor_t *desc, struct page *page,
 	if (!pages_ptr)
 		goto out_release_array;
 	do {
+		unsigned int pglen;
 		status = nfs_readdir_xdr_filler(pages, desc, &entry, file, inode);
 
 		if (status < 0)
 			break;
-		status = nfs_readdir_page_filler(desc, &entry, pages_ptr, page, array_size * PAGE_SIZE);
+		pglen = status;
+		status = nfs_readdir_page_filler(desc, &entry, pages_ptr, page, pglen);
 		if (status < 0) {
 			if (status == -ENOSPC)
 				status = 0;
diff --git a/fs/nfs/nfs2xdr.c b/fs/nfs/nfs2xdr.c
index e6bf45710cc7..2563f765c9b4 100644
--- a/fs/nfs/nfs2xdr.c
+++ b/fs/nfs/nfs2xdr.c
@@ -423,7 +423,7 @@ nfs_xdr_readdirres(struct rpc_rqst *req, __be32 *p, void *dummy)
 	struct page **page;
 	size_t hdrlen;
 	unsigned int pglen, recvd;
-	int status, nr = 0;
+	int status;
 
 	if ((status = ntohl(*p++)))
 		return nfs_stat_to_errno(status);
@@ -443,7 +443,7 @@ nfs_xdr_readdirres(struct rpc_rqst *req, __be32 *p, void *dummy)
 	if (pglen > recvd)
 		pglen = recvd;
 	page = rcvbuf->pages;
-	return nr;
+	return pglen;
 }
 
 static void print_overflow_msg(const char *func, const struct xdr_stream *xdr)
diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c
index d9a5e832c257..748dc91a4a14 100644
--- a/fs/nfs/nfs3xdr.c
+++ b/fs/nfs/nfs3xdr.c
@@ -555,7 +555,7 @@ nfs3_xdr_readdirres(struct rpc_rqst *req, __be32 *p, struct nfs3_readdirres *res
 	struct page **page;
 	size_t hdrlen;
 	u32 recvd, pglen;
-	int status, nr = 0;
+	int status;
 
 	status = ntohl(*p++);
 	/* Decode post_op_attrs */
@@ -586,7 +586,7 @@ nfs3_xdr_readdirres(struct rpc_rqst *req, __be32 *p, struct nfs3_readdirres *res
 		pglen = recvd;
 	page = rcvbuf->pages;
 
-	return nr;
+	return pglen;
 }
 
 __be32 *
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 0f24cdf2cb13..6a653ffd8e4e 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -2852,8 +2852,10 @@ static int _nfs4_proc_readdir(struct dentry *dentry, struct rpc_cred *cred,
 	nfs4_setup_readdir(cookie, NFS_COOKIEVERF(dir), dentry, &args);
 	res.pgbase = args.pgbase;
 	status = nfs4_call_sync(NFS_SERVER(dir), &msg, &args, &res, 0);
-	if (status == 0)
+	if (status >= 0) {
 		memcpy(NFS_COOKIEVERF(dir), res.verifier.data, NFS4_VERIFIER_SIZE);
+		status += args.pgbase;
+	}
 
 	nfs_invalidate_atime(dir);
 
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index f313c4cce7e4..b7a204ff6fe1 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -4518,7 +4518,7 @@ static int decode_readdir(struct xdr_stream *xdr, struct rpc_rqst *req, struct n
 	xdr_read_pages(xdr, pglen);
 
 
-	return 0;
+	return pglen;
 }
 
 static int decode_readlink(struct xdr_stream *xdr, struct rpc_rqst *req)

From e53beacd23d9cb47590da6a7a7f6d417b941a994 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 15 Nov 2010 18:31:02 -0800
Subject: [PATCH 0643/1066] Linux 2.6.37-rc2

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 6619720f50dd..ab5359db3d17 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 37
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

From 6f07d31e46639e4b1b23de6ee88c9e079a7bf32d Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Mon, 15 Nov 2010 13:33:25 -0800
Subject: [PATCH 0644/1066] Input: aiptek - tighten up permissions on sysfs
 attributes

Sysfs attributes affecting device behavior should not be, by default,
world-writeable. If distributions want to allow console users access
these attributes they need to employ udev and friends to adjust
permissions as needed.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/tablet/aiptek.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index 57b25b84d1fc..0a619c558bfb 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -1097,7 +1097,7 @@ store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const
 }
 
 static DEVICE_ATTR(pointer_mode,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletPointerMode, store_tabletPointerMode);
 
 /***********************************************************************
@@ -1134,7 +1134,7 @@ store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, co
 }
 
 static DEVICE_ATTR(coordinate_mode,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletCoordinateMode, store_tabletCoordinateMode);
 
 /***********************************************************************
@@ -1176,7 +1176,7 @@ store_tabletToolMode(struct device *dev, struct device_attribute *attr, const ch
 }
 
 static DEVICE_ATTR(tool_mode,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletToolMode, store_tabletToolMode);
 
 /***********************************************************************
@@ -1219,7 +1219,7 @@ store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char
 }
 
 static DEVICE_ATTR(xtilt,
-		   S_IRUGO | S_IWUGO, show_tabletXtilt, store_tabletXtilt);
+		   S_IRUGO | S_IWUSR, show_tabletXtilt, store_tabletXtilt);
 
 /***********************************************************************
  * support routines for the 'ytilt' file. Note that this file
@@ -1261,7 +1261,7 @@ store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char
 }
 
 static DEVICE_ATTR(ytilt,
-		   S_IRUGO | S_IWUGO, show_tabletYtilt, store_tabletYtilt);
+		   S_IRUGO | S_IWUSR, show_tabletYtilt, store_tabletYtilt);
 
 /***********************************************************************
  * support routines for the 'jitter' file. Note that this file
@@ -1288,7 +1288,7 @@ store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const
 }
 
 static DEVICE_ATTR(jitter,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletJitterDelay, store_tabletJitterDelay);
 
 /***********************************************************************
@@ -1317,7 +1317,7 @@ store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr,
 }
 
 static DEVICE_ATTR(delay,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletProgrammableDelay, store_tabletProgrammableDelay);
 
 /***********************************************************************
@@ -1406,7 +1406,7 @@ store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const
 }
 
 static DEVICE_ATTR(stylus_upper,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletStylusUpper, store_tabletStylusUpper);
 
 /***********************************************************************
@@ -1437,7 +1437,7 @@ store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const
 }
 
 static DEVICE_ATTR(stylus_lower,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletStylusLower, store_tabletStylusLower);
 
 /***********************************************************************
@@ -1475,7 +1475,7 @@ store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const c
 }
 
 static DEVICE_ATTR(mouse_left,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletMouseLeft, store_tabletMouseLeft);
 
 /***********************************************************************
@@ -1505,7 +1505,7 @@ store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const
 }
 
 static DEVICE_ATTR(mouse_middle,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletMouseMiddle, store_tabletMouseMiddle);
 
 /***********************************************************************
@@ -1535,7 +1535,7 @@ store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const
 }
 
 static DEVICE_ATTR(mouse_right,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletMouseRight, store_tabletMouseRight);
 
 /***********************************************************************
@@ -1567,7 +1567,7 @@ store_tabletWheel(struct device *dev, struct device_attribute *attr, const char
 }
 
 static DEVICE_ATTR(wheel,
-		   S_IRUGO | S_IWUGO, show_tabletWheel, store_tabletWheel);
+		   S_IRUGO | S_IWUSR, show_tabletWheel, store_tabletWheel);
 
 /***********************************************************************
  * support routines for the 'execute' file. Note that this file
@@ -1600,7 +1600,7 @@ store_tabletExecute(struct device *dev, struct device_attribute *attr, const cha
 }
 
 static DEVICE_ATTR(execute,
-		   S_IRUGO | S_IWUGO, show_tabletExecute, store_tabletExecute);
+		   S_IRUGO | S_IWUSR, show_tabletExecute, store_tabletExecute);
 
 /***********************************************************************
  * support routines for the 'odm_code' file. Note that this file

From df6e61d4ca268dc8706db38222fde9f04701566c Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 15 Nov 2010 21:17:27 -0800
Subject: [PATCH 0645/1066] kernel/sysctl.c: Fix build failure with
 !CONFIG_PRINTK

Sigh...

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/sysctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index b65bf634035e..5abfa1518554 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -702,7 +702,6 @@ static struct ctl_table kern_table[] = {
 		.extra1		= &zero,
 		.extra2		= &ten_thousand,
 	},
-#endif
 	{
 		.procname	= "dmesg_restrict",
 		.data		= &dmesg_restrict,
@@ -712,6 +711,7 @@ static struct ctl_table kern_table[] = {
 		.extra1		= &zero,
 		.extra2		= &one,
 	},
+#endif
 	{
 		.procname	= "ngroups_max",
 		.data		= &ngroups_max,

From 5685b971362651ee3d99ff3cc512c3bbd049d34d Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Fri, 12 Nov 2010 09:23:04 -0500
Subject: [PATCH 0646/1066] nfs: trivial: remove unused nfs_wait_event macro

Nothing uses this macro anymore.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 include/linux/nfs_fs.h | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index bba26684acdc..c66fdb7d6998 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -593,12 +593,6 @@ nfs_fileid_to_ino_t(u64 fileid)
 	return ino;
 }
 
-#define nfs_wait_event(clnt, wq, condition)				\
-({									\
-	int __retval = wait_event_killable(wq, condition);		\
-	__retval;							\
-})
-
 #define NFS_JUKEBOX_RETRY_TIME (5 * HZ)
 
 #endif /* __KERNEL__ */

From 94f58df8e545657f0b2d16eca1ac7a4ec39ed6be Mon Sep 17 00:00:00 2001
From: Jesper Juhl <jj@chaosbits.net>
Date: Sun, 7 Nov 2010 22:11:34 +0100
Subject: [PATCH 0647/1066] SUNRPC: Simplify rpc_alloc_iostats by removing
 pointless local variable

Hi,

We can simplify net/sunrpc/stats.c::rpc_alloc_iostats() a bit by getting
rid of the unneeded local variable 'new'.

Please CC me on replies.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 net/sunrpc/stats.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/net/sunrpc/stats.c b/net/sunrpc/stats.c
index f71a73107ae9..80df89d957ba 100644
--- a/net/sunrpc/stats.c
+++ b/net/sunrpc/stats.c
@@ -115,9 +115,7 @@ EXPORT_SYMBOL_GPL(svc_seq_show);
  */
 struct rpc_iostats *rpc_alloc_iostats(struct rpc_clnt *clnt)
 {
-	struct rpc_iostats *new;
-	new = kcalloc(clnt->cl_maxproc, sizeof(struct rpc_iostats), GFP_KERNEL);
-	return new;
+	return kcalloc(clnt->cl_maxproc, sizeof(struct rpc_iostats), GFP_KERNEL);
 }
 EXPORT_SYMBOL_GPL(rpc_alloc_iostats);
 

From 04e4bd1c67f941d81bff78a3b6b94194f081b7df Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Thu, 11 Nov 2010 12:53:47 +0000
Subject: [PATCH 0648/1066] nfs: Ignore kmemleak false positive in
 nfs_readdir_make_qstr

Strings allocated via kmemdup() in nfs_readdir_make_qstr() are
referenced from the nfs_cache_array which is stored in a page cache
page. Kmemleak does not scan such pages and it reports several false
positives. This patch annotates the string->name pointer so that
kmemleak does not consider it a real leak.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/dir.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index c9196c9cf5a6..662df2a5fad5 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -34,6 +34,7 @@
 #include <linux/mount.h>
 #include <linux/sched.h>
 #include <linux/vmalloc.h>
+#include <linux/kmemleak.h>
 
 #include "delegation.h"
 #include "iostat.h"
@@ -238,6 +239,11 @@ int nfs_readdir_make_qstr(struct qstr *string, const char *name, unsigned int le
 	string->name = kmemdup(name, len, GFP_KERNEL);
 	if (string->name == NULL)
 		return -ENOMEM;
+	/*
+	 * Avoid a kmemleak false positive. The pointer to the name is stored
+	 * in a page cache page which kmemleak does not scan.
+	 */
+	kmemleak_not_leak(string->name);
 	string->hash = full_name_hash(name, len);
 	return 0;
 }

From 8c05cd08a7504b855c265263e84af61aabafa329 Mon Sep 17 00:00:00 2001
From: "Darrick J. Wong" <djwong@us.ibm.com>
Date: Tue, 16 Nov 2010 09:13:41 -0800
Subject: [PATCH 0649/1066] PCI: fix offset check for sysfs mmapped files

I just loaded 2.6.37-rc2 on my machines, and I noticed that X no longer starts.
Running an strace of the X server shows that it's doing this:

open("/sys/bus/pci/devices/0000:07:00.0/resource0", O_RDWR) = 10
mmap(NULL, 16777216, PROT_READ|PROT_WRITE, MAP_SHARED, 10, 0) = -1 EINVAL (Invalid argument)

This code seems to be asking for a shared read/write mapping of 16MB worth of
BAR0 starting at file offset 0, and letting the kernel assign a starting
address.  Unfortunately, this -EINVAL causes X not to start.  Looking into
dmesg, there's a complaint like so:

process "Xorg" tried to map 0x01000000 bytes at page 0x00000000 on 0000:07:00.0 BAR 0 (start 0x        96000000, size 0x         1000000)

...with the following code in pci_mmap_fits:

	pci_start = (mmap_api == PCI_MMAP_SYSFS) ?
		pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
        if (start >= pci_start && start < pci_start + size &&
                        start + nr <= pci_start + size)

It looks like the logic here is set up such that when the mmap call comes via
sysfs, the check in pci_mmap_fits wants vma->vm_pgoff to be between the
resource's start and end address, and the end of the vma to be no farther than
the end.  However, the sysfs PCI resource files always start at offset zero,
which means that this test always fails for programs that mmap the sysfs files.
Given the comment in the original commit
3b519e4ea618b6943a82931630872907f9ac2c2b, I _think_ the old procfs files
require that the file offset be equal to the resource's base address when
mmapping.

I think what we want here is for pci_start to be 0 when mmap_api ==
PCI_MMAP_PROCFS.  The following patch makes that change, after which the Matrox
and Mach64 X drivers work again.

Acked-by: Martin Wilck <martin.wilck@ts.fujitsu.com>
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/pci-sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 95712a375cd5..63d5042f2079 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -715,7 +715,7 @@ int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma,
 	nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 	start = vma->vm_pgoff;
 	size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1;
-	pci_start = (mmap_api == PCI_MMAP_SYSFS) ?
+	pci_start = (mmap_api == PCI_MMAP_PROCFS) ?
 			pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
 	if (start >= pci_start && start < pci_start + size &&
 			start + nr <= pci_start + size)

From 4c62ab9c538bc09c38093fa079e6902ea4d42b98 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Tue, 16 Nov 2010 09:50:47 -0800
Subject: [PATCH 0650/1066] irda: irttp: allow zero byte packets

Sending zero byte packets is not neccessarily an error (AF_INET accepts it,
too), so just apply a shortcut. This was discovered because of a non-working
software with WINE. See

  http://bugs.winehq.org/show_bug.cgi?id=19397#c86
  http://thread.gmane.org/gmane.linux.irda.general/1643

for very detailed debugging information and a testcase. Kudos to Wolfgang for
those!

Reported-by: Wolfgang Schwotzer <wolfgang.schwotzer@gmx.net>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Mike Evans <mike.evans@cardolan.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/irda/irttp.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/net/irda/irttp.c b/net/irda/irttp.c
index 285761e77d90..6cfaeaf2a370 100644
--- a/net/irda/irttp.c
+++ b/net/irda/irttp.c
@@ -550,16 +550,23 @@ EXPORT_SYMBOL(irttp_close_tsap);
  */
 int irttp_udata_request(struct tsap_cb *self, struct sk_buff *skb)
 {
+	int ret = -1;
+
 	IRDA_ASSERT(self != NULL, return -1;);
 	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
 	IRDA_ASSERT(skb != NULL, return -1;);
 
 	IRDA_DEBUG(4, "%s()\n", __func__);
 
+	/* Take shortcut on zero byte packets */
+	if (skb->len == 0) {
+		ret = 0;
+		goto err;
+	}
+
 	/* Check that nothing bad happens */
-	if ((skb->len == 0) || (!self->connected)) {
-		IRDA_DEBUG(1, "%s(), No data, or not connected\n",
-			   __func__);
+	if (!self->connected) {
+		IRDA_DEBUG(1, "%s(), Not connected\n", __func__);
 		goto err;
 	}
 
@@ -576,7 +583,7 @@ int irttp_udata_request(struct tsap_cb *self, struct sk_buff *skb)
 
 err:
 	dev_kfree_skb(skb);
-	return -1;
+	return ret;
 }
 EXPORT_SYMBOL(irttp_udata_request);
 
@@ -599,9 +606,15 @@ int irttp_data_request(struct tsap_cb *self, struct sk_buff *skb)
 	IRDA_DEBUG(2, "%s() : queue len = %d\n", __func__,
 		   skb_queue_len(&self->tx_queue));
 
+	/* Take shortcut on zero byte packets */
+	if (skb->len == 0) {
+		ret = 0;
+		goto err;
+	}
+
 	/* Check that nothing bad happens */
-	if ((skb->len == 0) || (!self->connected)) {
-		IRDA_WARNING("%s: No data, or not connected\n", __func__);
+	if (!self->connected) {
+		IRDA_WARNING("%s: Not connected\n", __func__);
 		ret = -ENOTCONN;
 		goto err;
 	}

From 744f9f104ea262de1dc3e29265870c649f0d9473 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Sat, 13 Nov 2010 11:44:39 -0500
Subject: [PATCH 0651/1066] xen: fix header export to userspace

scripts/headers_install.pl prevents "__user" from being exported
to userspace headers, so just use compiler.h to make sure that
__user is defined and avoid the error.

unifdef: linux-next-20101112/xx64/usr/include/xen/privcmd.h.tmp: 79: Premature EOF (#if line 33 depth 1)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc:	xen-devel@lists.xensource.com (moderated for non-subscribers)
Cc:	virtualization@lists.osdl.org
Cc:	Tony Finch <dot@dotat.at>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 include/xen/privcmd.h | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/include/xen/privcmd.h b/include/xen/privcmd.h
index b42cdfd92fee..17857fb4d550 100644
--- a/include/xen/privcmd.h
+++ b/include/xen/privcmd.h
@@ -34,13 +34,10 @@
 #define __LINUX_PUBLIC_PRIVCMD_H__
 
 #include <linux/types.h>
+#include <linux/compiler.h>
 
 typedef unsigned long xen_pfn_t;
 
-#ifndef __user
-#define __user
-#endif
-
 struct privcmd_hypercall {
 	__u64 op;
 	__u64 arg[5];

From fe61f1d737f7804e0bd440ace9724e669e2c2906 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Tue, 16 Nov 2010 11:06:46 -0800
Subject: [PATCH 0652/1066] xen/xenfs: update xenfs_mount for new prototype

.mount now returns a struct dentry *.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/xenfs/super.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/xen/xenfs/super.c b/drivers/xen/xenfs/super.c
index f6339d11d59c..990ee42167a1 100644
--- a/drivers/xen/xenfs/super.c
+++ b/drivers/xen/xenfs/super.c
@@ -121,9 +121,9 @@ static int xenfs_fill_super(struct super_block *sb, void *data, int silent)
 	return rc;
 }
 
-static int xenfs_mount(struct file_system_type *fs_type,
-			int flags, const char *dev_name,
-			void *data)
+static struct dentry *xenfs_mount(struct file_system_type *fs_type,
+				  int flags, const char *dev_name,
+				  void *data)
 {
 	return mount_single(fs_type, flags, data, xenfs_fill_super);
 }

From 7d98ffd8c2d1da6cec5d84eba42c4aa836a93f85 Mon Sep 17 00:00:00 2001
From: Ulrich Weber <uweber@astaro.com>
Date: Fri, 5 Nov 2010 01:39:12 +0000
Subject: [PATCH 0653/1066] xfrm: update flowi saddr in icmp_send if unset

otherwise xfrm_lookup will fail to find correct policy

Signed-off-by: Ulrich Weber <uweber@astaro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/icmp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 96bc7f9475a3..e5d1a44bcbdf 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -569,6 +569,9 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 		/* No need to clone since we're just using its address. */
 		rt2 = rt;
 
+		if (!fl.nl_u.ip4_u.saddr)
+			fl.nl_u.ip4_u.saddr = rt->rt_src;
+
 		err = xfrm_lookup(net, (struct dst_entry **)&rt, &fl, NULL, 0);
 		switch (err) {
 		case 0:

From e8364bb8d041c0fd92d69a17ff19f535e1d1c187 Mon Sep 17 00:00:00 2001
From: Vivek Natarajan <vnatarajan@atheros.com>
Date: Wed, 10 Nov 2010 15:11:07 +0530
Subject: [PATCH 0654/1066] ath9k: Remove pm_qos request after hw unregister.

Update pm_qos before removing it in deinit_device to prevent this
warning:

pm_qos_update_request() called for unknown object.

Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/init.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 6a0d99eff404..92bc5c5f4876 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -817,8 +817,6 @@ void ath9k_deinit_device(struct ath_softc *sc)
 
 	ath9k_ps_wakeup(sc);
 
-	pm_qos_remove_request(&ath9k_pm_qos_req);
-
 	wiphy_rfkill_stop_polling(sc->hw->wiphy);
 	ath_deinit_leds(sc);
 
@@ -832,6 +830,7 @@ void ath9k_deinit_device(struct ath_softc *sc)
 	}
 
 	ieee80211_unregister_hw(hw);
+	pm_qos_remove_request(&ath9k_pm_qos_req);
 	ath_rx_cleanup(sc);
 	ath_tx_cleanup(sc);
 	ath9k_deinit_softc(sc);

From 32b089558c54792028f14ae830ca7c0a8d9ac9a3 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Wed, 10 Nov 2010 17:51:24 +0530
Subject: [PATCH 0655/1066] ath9k_htc: Update usb device ID list

Added new VID/PIDs into supported devices list

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index f7ec31b4ddd3..0e1227769e9f 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -36,8 +36,13 @@ static struct usb_device_id ath9k_hif_usb_ids[] = {
 	{ USB_DEVICE(0x13D3, 0x3327) }, /* Azurewave */
 	{ USB_DEVICE(0x13D3, 0x3328) }, /* Azurewave */
 	{ USB_DEVICE(0x13D3, 0x3346) }, /* IMC Networks */
+	{ USB_DEVICE(0x13D3, 0x3348) }, /* Azurewave */
+	{ USB_DEVICE(0x13D3, 0x3349) }, /* Azurewave */
+	{ USB_DEVICE(0x13D3, 0x3350) }, /* Azurewave */
 	{ USB_DEVICE(0x04CA, 0x4605) }, /* Liteon */
 	{ USB_DEVICE(0x083A, 0xA704) }, /* SMC Networks */
+	{ USB_DEVICE(0x040D, 0x3801) }, /* VIA */
+	{ USB_DEVICE(0x1668, 0x1200) }, /* Verizon */
 	{ },
 };
 

From 7cbf2611dac8d5f76fe64795a9426b8c97e6c3f8 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Wed, 10 Nov 2010 17:51:25 +0530
Subject: [PATCH 0656/1066] ath9k_htc: Add new devices into AR7010

Treat new PIDs (0xA704, 0x1200) as AR7010 devices.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c      | 4 ++++
 drivers/net/wireless/ath/ath9k/htc_drv_init.c | 2 ++
 drivers/net/wireless/ath/ath9k/reg.h          | 4 +++-
 3 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 0e1227769e9f..dfb6560dab92 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -811,6 +811,8 @@ static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
 	case 0x7010:
 	case 0x7015:
 	case 0x9018:
+	case 0xA704:
+	case 0x1200:
 		firm_offset = AR7010_FIRMWARE_TEXT;
 		break;
 	default:
@@ -933,6 +935,8 @@ static int ath9k_hif_usb_probe(struct usb_interface *interface,
 	case 0x7010:
 	case 0x7015:
 	case 0x9018:
+	case 0xA704:
+	case 0x1200:
 		if (le16_to_cpu(udev->descriptor.bcdDevice) == 0x0202)
 			hif_dev->fw_name = FIRMWARE_AR7010_1_1;
 		else
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 3d7b97f1b3ae..7c8a38d04561 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -249,6 +249,8 @@ static int ath9k_init_htc_services(struct ath9k_htc_priv *priv, u16 devid)
 	case 0x7010:
 	case 0x7015:
 	case 0x9018:
+	case 0xA704:
+	case 0x1200:
 		priv->htc->credits = 45;
 		break;
 	default:
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index fa05b711e5cd..52ee82d6796b 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -866,7 +866,9 @@
 #define AR_DEVID_7010(_ah) \
 	(((_ah)->hw_version.devid == 0x7010) || \
 	 ((_ah)->hw_version.devid == 0x7015) || \
-	 ((_ah)->hw_version.devid == 0x9018))
+	 ((_ah)->hw_version.devid == 0x9018) || \
+	 ((_ah)->hw_version.devid == 0xA704) || \
+	 ((_ah)->hw_version.devid == 0x1200))
 
 #define AR_RADIO_SREV_MAJOR                   0xf0
 #define AR_RAD5133_SREV_MAJOR                 0xc0

From b5261cf4f3860bd772346a3e692683b6144dd44c Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Wed, 10 Nov 2010 17:51:26 +0530
Subject: [PATCH 0657/1066] ath9k_hw: Set proper eeprom offset for AR9287 HTC
 devices

AR9287 based PCI & USB devices are differed in eeprom start offset.
So set proper the offset for HTC devices to read nvram correctly.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/eeprom_9287.c | 2 +-
 drivers/net/wireless/ath/ath9k/reg.h         | 4 ++++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
index 966b9496a9dd..195406db3bd8 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
@@ -37,7 +37,7 @@ static bool ath9k_hw_ar9287_fill_eeprom(struct ath_hw *ah)
 	int addr, eep_start_loc;
 	eep_data = (u16 *)eep;
 
-	if (ah->hw_version.devid == 0x7015)
+	if (AR9287_HTC_DEVID(ah))
 		eep_start_loc = AR9287_HTC_EEP_START_LOC;
 	else
 		eep_start_loc = AR9287_EEP_START_LOC;
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 52ee82d6796b..dddf579aacf1 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -870,6 +870,10 @@
 	 ((_ah)->hw_version.devid == 0xA704) || \
 	 ((_ah)->hw_version.devid == 0x1200))
 
+#define AR9287_HTC_DEVID(_ah) \
+	(((_ah)->hw_version.devid == 0x7015) || \
+	 ((_ah)->hw_version.devid == 0x1200))
+
 #define AR_RADIO_SREV_MAJOR                   0xf0
 #define AR_RAD5133_SREV_MAJOR                 0xc0
 #define AR_RAD2133_SREV_MAJOR                 0xd0

From 9236d838c920e90708570d9bbd7bb82d30a38130 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Fri, 12 Nov 2010 16:31:23 -0800
Subject: [PATCH 0658/1066] cfg80211: fix extension channel checks to initiate
 communication

When operating in a mode that initiates communication and using
HT40 we should fail if we cannot use both primary and secondary
channels to initiate communication. Our current ht40 allowmap
only covers STA mode of operation, for beaconing modes we need
a check on the fly as the mode of operation is dynamic and
there other flags other than disable which we should read
to check if we can initiate communication.

Do not allow for initiating communication if our secondary HT40
channel has is either disabled, has a passive scan flag, a
no-ibss flag or is a radar channel. Userspace now has similar
checks but this is also needed in-kernel.

Reported-by: Jouni Malinen <jouni.malinen@atheros.com>
Cc: stable@kernel.org
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/wireless/chan.c | 52 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index d0c92dddb26b..c8d190d911e4 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -44,6 +44,36 @@ rdev_freq_to_chan(struct cfg80211_registered_device *rdev,
 	return chan;
 }
 
+static bool can_beacon_sec_chan(struct wiphy *wiphy,
+				struct ieee80211_channel *chan,
+				enum nl80211_channel_type channel_type)
+{
+	struct ieee80211_channel *sec_chan;
+	int diff;
+
+	switch (channel_type) {
+	case NL80211_CHAN_HT40PLUS:
+		diff = 20;
+	case NL80211_CHAN_HT40MINUS:
+		diff = -20;
+	default:
+		return false;
+	}
+
+	sec_chan = ieee80211_get_channel(wiphy, chan->center_freq + diff);
+	if (!sec_chan)
+		return false;
+
+	/* we'll need a DFS capability later */
+	if (sec_chan->flags & (IEEE80211_CHAN_DISABLED |
+			       IEEE80211_CHAN_PASSIVE_SCAN |
+			       IEEE80211_CHAN_NO_IBSS |
+			       IEEE80211_CHAN_RADAR))
+		return false;
+
+	return true;
+}
+
 int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
 		      struct wireless_dev *wdev, int freq,
 		      enum nl80211_channel_type channel_type)
@@ -68,6 +98,28 @@ int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
 	if (!chan)
 		return -EINVAL;
 
+	/* Both channels should be able to initiate communication */
+	if (wdev && (wdev->iftype == NL80211_IFTYPE_ADHOC ||
+		     wdev->iftype == NL80211_IFTYPE_AP ||
+		     wdev->iftype == NL80211_IFTYPE_AP_VLAN ||
+		     wdev->iftype == NL80211_IFTYPE_MESH_POINT ||
+		     wdev->iftype == NL80211_IFTYPE_P2P_GO)) {
+		switch (channel_type) {
+		case NL80211_CHAN_HT40PLUS:
+		case NL80211_CHAN_HT40MINUS:
+			if (!can_beacon_sec_chan(&rdev->wiphy, chan,
+						 channel_type)) {
+				printk(KERN_DEBUG
+				       "cfg80211: Secondary channel not "
+				       "allowed to initiate communication\n");
+				return -EINVAL;
+			}
+			break;
+		default:
+			break;
+		}
+	}
+
 	result = rdev->ops->set_channel(&rdev->wiphy,
 					wdev ? wdev->netdev : NULL,
 					chan, channel_type);

From f281233d3eba15fb225d21ae2e228fd4553d824a Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Tue, 16 Nov 2010 02:10:29 -0500
Subject: [PATCH 0659/1066] SCSI host lock push-down

Move the mid-layer's ->queuecommand() invocation from being locked
with the host lock to being unlocked to facilitate speeding up the
critical path for drivers who don't need this lock taken anyway.

The patch below presents a simple SCSI host lock push-down as an
equivalent transformation.  No locking or other behavior should change
with this patch.  All existing bugs and locking orders are preserved.

Additionally, add one parameter to queuecommand,
	struct Scsi_Host *
and remove one parameter from queuecommand,
	void (*done)(struct scsi_cmnd *)

Scsi_Host* is a convenient pointer that most host drivers need anyway,
and 'done' is redundant to struct scsi_cmnd->scsi_done.

Minimal code disturbance was attempted with this change.  Most drivers
needed only two one-line modifications for their host lock push-down.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/ia64/hp/sim/simscsi.c            |  4 +++-
 drivers/ata/libata-scsi.c             |  4 +++-
 drivers/block/cciss_scsi.c            |  8 +++++---
 drivers/firewire/sbp2.c               |  4 +++-
 drivers/infiniband/ulp/srp/ib_srp.c   |  4 +++-
 drivers/message/fusion/mptfc.c        |  7 ++++---
 drivers/message/fusion/mptsas.c       |  4 +++-
 drivers/message/fusion/mptspi.c       |  4 +++-
 drivers/message/i2o/i2o_scsi.c        |  6 ++++--
 drivers/s390/scsi/zfcp_scsi.c         |  4 +++-
 drivers/scsi/3w-9xxx.c                |  4 +++-
 drivers/scsi/3w-sas.c                 |  4 +++-
 drivers/scsi/3w-xxxx.c                |  4 +++-
 drivers/scsi/53c700.c                 |  8 +++++---
 drivers/scsi/BusLogic.c               |  3 ++-
 drivers/scsi/BusLogic.h               |  2 +-
 drivers/scsi/NCR5380.c                |  3 ++-
 drivers/scsi/NCR5380.h                |  2 +-
 drivers/scsi/NCR53c406a.c             |  4 +++-
 drivers/scsi/a100u2w.c                |  4 +++-
 drivers/scsi/aacraid/linit.c          |  4 +++-
 drivers/scsi/advansys.c               |  4 +++-
 drivers/scsi/aha152x.c                |  4 +++-
 drivers/scsi/aha1542.c                |  4 +++-
 drivers/scsi/aha1542.h                |  2 +-
 drivers/scsi/aha1740.c                |  4 +++-
 drivers/scsi/aic7xxx/aic79xx_osm.c    |  4 +++-
 drivers/scsi/aic7xxx/aic7xxx_osm.c    |  4 +++-
 drivers/scsi/aic7xxx_old.c            |  4 +++-
 drivers/scsi/arcmsr/arcmsr_hba.c      |  7 ++++---
 drivers/scsi/arm/acornscsi.c          |  4 +++-
 drivers/scsi/arm/fas216.c             | 10 +++++++---
 drivers/scsi/arm/fas216.h             | 18 ++++++++----------
 drivers/scsi/atari_NCR5380.c          |  4 +++-
 drivers/scsi/atari_scsi.c             | 17 -----------------
 drivers/scsi/atp870u.c                |  4 +++-
 drivers/scsi/bfa/bfad_im.c            |  7 ++++---
 drivers/scsi/dc395x.c                 |  3 ++-
 drivers/scsi/dpt_i2o.c                |  4 +++-
 drivers/scsi/dpti.h                   |  2 +-
 drivers/scsi/dtc.h                    |  2 +-
 drivers/scsi/eata.c                   |  7 ++++---
 drivers/scsi/eata_pio.c               |  4 +++-
 drivers/scsi/esp_scsi.c               |  4 +++-
 drivers/scsi/fd_mcs.c                 |  4 +++-
 drivers/scsi/fdomain.c                |  4 +++-
 drivers/scsi/fnic/fnic.h              |  2 +-
 drivers/scsi/fnic/fnic_scsi.c         |  4 +++-
 drivers/scsi/g_NCR5380.h              |  2 +-
 drivers/scsi/gdth.c                   |  6 ++++--
 drivers/scsi/hpsa.c                   |  7 ++++---
 drivers/scsi/hptiop.c                 |  4 +++-
 drivers/scsi/ibmmca.c                 |  6 ++++--
 drivers/scsi/ibmvscsi/ibmvfc.c        |  4 +++-
 drivers/scsi/ibmvscsi/ibmvscsi.c      |  4 +++-
 drivers/scsi/imm.c                    |  4 +++-
 drivers/scsi/in2000.c                 |  4 +++-
 drivers/scsi/in2000.h                 |  2 +-
 drivers/scsi/initio.c                 |  4 +++-
 drivers/scsi/ipr.c                    |  4 +++-
 drivers/scsi/ips.c                    |  6 ++++--
 drivers/scsi/libfc/fc_fcp.c           |  4 +++-
 drivers/scsi/libiscsi.c               |  4 +++-
 drivers/scsi/libsas/sas_scsi_host.c   |  4 +++-
 drivers/scsi/lpfc/lpfc_scsi.c         |  4 +++-
 drivers/scsi/mac53c94.c               |  4 +++-
 drivers/scsi/megaraid.c               |  6 ++++--
 drivers/scsi/megaraid.h               |  2 +-
 drivers/scsi/megaraid/megaraid_mbox.c |  7 ++++---
 drivers/scsi/megaraid/megaraid_sas.c  |  4 +++-
 drivers/scsi/mesh.c                   |  4 +++-
 drivers/scsi/mpt2sas/mpt2sas_scsih.c  |  4 +++-
 drivers/scsi/ncr53c8xx.c              |  4 +++-
 drivers/scsi/nsp32.c                  |  7 ++++---
 drivers/scsi/pas16.h                  |  2 +-
 drivers/scsi/pcmcia/nsp_cs.c          |  4 +++-
 drivers/scsi/pcmcia/nsp_cs.h          |  3 +--
 drivers/scsi/pcmcia/sym53c500_cs.c    |  4 +++-
 drivers/scsi/pmcraid.c                |  4 +++-
 drivers/scsi/ppa.c                    |  4 +++-
 drivers/scsi/ps3rom.c                 |  4 +++-
 drivers/scsi/qla1280.c                |  4 +++-
 drivers/scsi/qla2xxx/qla_os.c         |  7 ++++---
 drivers/scsi/qla4xxx/ql4_os.c         |  7 ++++---
 drivers/scsi/qlogicfas408.c           |  4 +++-
 drivers/scsi/qlogicfas408.h           |  3 +--
 drivers/scsi/qlogicpti.c              |  4 +++-
 drivers/scsi/scsi.c                   | 18 +++++-------------
 drivers/scsi/scsi_debug.c             |  4 +++-
 drivers/scsi/scsi_error.c             |  6 ++----
 drivers/scsi/stex.c                   |  4 +++-
 drivers/scsi/sun3_NCR5380.c           |  4 +++-
 drivers/scsi/sun3_scsi.h              |  3 +--
 drivers/scsi/sym53c416.c              |  4 +++-
 drivers/scsi/sym53c416.h              |  2 +-
 drivers/scsi/sym53c8xx_2/sym_glue.c   |  4 +++-
 drivers/scsi/t128.h                   |  3 +--
 drivers/scsi/tmscsim.c                |  4 +++-
 drivers/scsi/u14-34f.c                |  6 ++++--
 drivers/scsi/ultrastor.c              |  4 +++-
 drivers/scsi/ultrastor.h              |  3 +--
 drivers/scsi/vmw_pvscsi.c             |  4 +++-
 drivers/scsi/wd33c93.c                |  6 ++++--
 drivers/scsi/wd33c93.h                |  3 +--
 drivers/scsi/wd7000.c                 |  4 +++-
 drivers/staging/hv/storvsc_drv.c      |  7 ++++---
 drivers/staging/keucr/scsiglue.c      |  4 +++-
 drivers/usb/image/microtek.c          |  6 ++++--
 drivers/usb/storage/scsiglue.c        |  4 +++-
 drivers/usb/storage/uas.c             |  4 +++-
 include/linux/libata.h                |  2 +-
 include/scsi/libfc.h                  |  3 +--
 include/scsi/libiscsi.h               |  3 +--
 include/scsi/libsas.h                 |  3 +--
 include/scsi/scsi_host.h              | 23 +++++++++++++++++++++--
 115 files changed, 347 insertions(+), 199 deletions(-)

diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c
index 3a078ad3aa44..331de723c676 100644
--- a/arch/ia64/hp/sim/simscsi.c
+++ b/arch/ia64/hp/sim/simscsi.c
@@ -202,7 +202,7 @@ simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
 }
 
 static int
-simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
+simscsi_queuecommand_lck (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 {
 	unsigned int target_id = sc->device->id;
 	char fname[MAX_ROOT_LEN+16];
@@ -326,6 +326,8 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(simscsi_queuecommand)
+
 static int
 simscsi_host_reset (struct scsi_cmnd *sc)
 {
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 3f91c01c217f..19835d39289d 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3183,7 +3183,7 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
  *	Return value from __ata_scsi_queuecmd() if @cmd can be queued,
  *	0 otherwise.
  */
-int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int ata_scsi_queuecmd_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct ata_port *ap;
 	struct ata_device *dev;
@@ -3211,6 +3211,8 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 	return rc;
 }
 
+DEF_SCSI_QCMD(ata_scsi_queuecmd)
+
 /**
  *	ata_scsi_simulate - simulate SCSI command on ATA device
  *	@dev: the target device
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 575495f3c4b8..727d0225b7d0 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -62,8 +62,8 @@ static int cciss_scsi_proc_info(
 		int length, 	   /* length of data in buffer */
 		int func);	   /* 0 == read, 1 == write */
 
-static int cciss_scsi_queue_command (struct scsi_cmnd *cmd,
-		void (* done)(struct scsi_cmnd *));
+static int cciss_scsi_queue_command (struct Scsi_Host *h,
+				     struct scsi_cmnd *cmd);
 static int cciss_eh_device_reset_handler(struct scsi_cmnd *);
 static int cciss_eh_abort_handler(struct scsi_cmnd *);
 
@@ -1406,7 +1406,7 @@ static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *c,
 
 
 static int
-cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
+cciss_scsi_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	ctlr_info_t *h;
 	int rc;
@@ -1504,6 +1504,8 @@ cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd
 	return 0;
 }
 
+static DEF_SCSI_QCMD(cciss_scsi_queue_command)
+
 static void cciss_unregister_scsi(ctlr_info_t *h)
 {
 	struct cciss_scsi_adapter_data_t *sa;
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index bfae4b309791..afa576a75a8e 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -1468,7 +1468,7 @@ static int sbp2_map_scatterlist(struct sbp2_command_orb *orb,
 
 /* SCSI stack integration */
 
-static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
+static int sbp2_scsi_queuecommand_lck(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 {
 	struct sbp2_logical_unit *lu = cmd->device->hostdata;
 	struct fw_device *device = target_device(lu->tgt);
@@ -1534,6 +1534,8 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 	return retval;
 }
 
+static DEF_SCSI_QCMD(sbp2_scsi_queuecommand)
+
 static int sbp2_scsi_slave_alloc(struct scsi_device *sdev)
 {
 	struct sbp2_logical_unit *lu = sdev->hostdata;
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index cfc1d65c4577..1e1e347a7715 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -1123,7 +1123,7 @@ static void srp_send_completion(struct ib_cq *cq, void *target_ptr)
 	}
 }
 
-static int srp_queuecommand(struct scsi_cmnd *scmnd,
+static int srp_queuecommand_lck(struct scsi_cmnd *scmnd,
 			    void (*done)(struct scsi_cmnd *))
 {
 	struct srp_target_port *target = host_to_target(scmnd->device->host);
@@ -1196,6 +1196,8 @@ err:
 	return SCSI_MLQUEUE_HOST_BUSY;
 }
 
+static DEF_SCSI_QCMD(srp_queuecommand)
+
 static int srp_alloc_iu_bufs(struct srp_target_port *target)
 {
 	int i;
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index e15220ff52fc..d784c36707c0 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -97,8 +97,7 @@ static u8	mptfcInternalCtx = MPT_MAX_PROTOCOL_DRIVERS;
 
 static int mptfc_target_alloc(struct scsi_target *starget);
 static int mptfc_slave_alloc(struct scsi_device *sdev);
-static int mptfc_qcmd(struct scsi_cmnd *SCpnt,
-		      void (*done)(struct scsi_cmnd *));
+static int mptfc_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *SCpnt);
 static void mptfc_target_destroy(struct scsi_target *starget);
 static void mptfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout);
 static void __devexit mptfc_remove(struct pci_dev *pdev);
@@ -650,7 +649,7 @@ mptfc_slave_alloc(struct scsi_device *sdev)
 }
 
 static int
-mptfc_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+mptfc_qcmd_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
 	struct mptfc_rport_info	*ri;
 	struct fc_rport	*rport = starget_to_rport(scsi_target(SCpnt->device));
@@ -681,6 +680,8 @@ mptfc_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	return mptscsih_qcmd(SCpnt,done);
 }
 
+static DEF_SCSI_QCMD(mptfc_qcmd)
+
 /*
  *	mptfc_display_port_link_speed - displaying link speed
  *	@ioc: Pointer to MPT_ADAPTER structure
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 83a5115f0251..d48c2c6058e1 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -1889,7 +1889,7 @@ mptsas_slave_alloc(struct scsi_device *sdev)
 }
 
 static int
-mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+mptsas_qcmd_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
 	MPT_SCSI_HOST	*hd;
 	MPT_ADAPTER	*ioc;
@@ -1913,6 +1913,8 @@ mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	return mptscsih_qcmd(SCpnt,done);
 }
 
+static DEF_SCSI_QCMD(mptsas_qcmd)
+
 /**
  *	mptsas_mptsas_eh_timed_out - resets the scsi_cmnd timeout
  *		if the device under question is currently in the
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 0e2803155ae2..6d9568d2ec59 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -780,7 +780,7 @@ static int mptspi_slave_configure(struct scsi_device *sdev)
 }
 
 static int
-mptspi_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+mptspi_qcmd_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
 	struct _MPT_SCSI_HOST *hd = shost_priv(SCpnt->device->host);
 	VirtDevice	*vdevice = SCpnt->device->hostdata;
@@ -805,6 +805,8 @@ mptspi_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	return mptscsih_qcmd(SCpnt,done);
 }
 
+static DEF_SCSI_QCMD(mptspi_qcmd)
+
 static void mptspi_slave_destroy(struct scsi_device *sdev)
 {
 	struct scsi_target *starget = scsi_target(sdev);
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index ea6b2197da8a..97bdf82ec905 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -506,7 +506,7 @@ static struct i2o_driver i2o_scsi_driver = {
  *	Locks: takes the controller lock on error path only
  */
 
-static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
+static int i2o_scsi_queuecommand_lck(struct scsi_cmnd *SCpnt,
 				 void (*done) (struct scsi_cmnd *))
 {
 	struct i2o_controller *c;
@@ -688,7 +688,9 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
 
       exit:
 	return rc;
-};
+}
+
+static DEF_SCSI_QCMD(i2o_scsi_queuecommand)
 
 /**
  *	i2o_scsi_abort - abort a running command
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 50286d8707f3..6bd2dbc4c316 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -76,7 +76,7 @@ static void zfcp_scsi_command_fail(struct scsi_cmnd *scpnt, int result)
 	scpnt->scsi_done(scpnt);
 }
 
-static int zfcp_scsi_queuecommand(struct scsi_cmnd *scpnt,
+static int zfcp_scsi_queuecommand_lck(struct scsi_cmnd *scpnt,
 				  void (*done) (struct scsi_cmnd *))
 {
 	struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(scpnt->device);
@@ -127,6 +127,8 @@ static int zfcp_scsi_queuecommand(struct scsi_cmnd *scpnt,
 	return ret;
 }
 
+static DEF_SCSI_QCMD(zfcp_scsi_queuecommand)
+
 static int zfcp_scsi_slave_alloc(struct scsi_device *sdev)
 {
 	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index fcf08b3f52c1..b7bd5b0cc7aa 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1765,7 +1765,7 @@ out:
 } /* End twa_scsi_eh_reset() */
 
 /* This is the main scsi queue function to handle scsi opcodes */
-static int twa_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+static int twa_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
 	int request_id, retval;
 	TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
@@ -1812,6 +1812,8 @@ out:
 	return retval;
 } /* End twa_scsi_queue() */
 
+static DEF_SCSI_QCMD(twa_scsi_queue)
+
 /* This function hands scsi cdb's to the firmware */
 static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry *sglistarg)
 {
diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c
index 6a95d111d207..13e39e1fdfe2 100644
--- a/drivers/scsi/3w-sas.c
+++ b/drivers/scsi/3w-sas.c
@@ -1501,7 +1501,7 @@ out:
 } /* End twl_scsi_eh_reset() */
 
 /* This is the main scsi queue function to handle scsi opcodes */
-static int twl_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+static int twl_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
 	int request_id, retval;
 	TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
@@ -1536,6 +1536,8 @@ out:
 	return retval;
 } /* End twl_scsi_queue() */
 
+static DEF_SCSI_QCMD(twl_scsi_queue)
+
 /* This function tells the controller to shut down */
 static void __twl_shutdown(TW_Device_Extension *tw_dev)
 {
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index b1125341f4c8..7fe96ff60c58 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -1947,7 +1947,7 @@ static int tw_scsiop_test_unit_ready_complete(TW_Device_Extension *tw_dev, int r
 } /* End tw_scsiop_test_unit_ready_complete() */
 
 /* This is the main scsi queue function to handle scsi opcodes */
-static int tw_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) 
+static int tw_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
 	unsigned char *command = SCpnt->cmnd;
 	int request_id = 0;
@@ -2023,6 +2023,8 @@ static int tw_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd
 	return retval;
 } /* End tw_scsi_queue() */
 
+static DEF_SCSI_QCMD(tw_scsi_queue)
+
 /* This function is the interrupt service routine */
 static irqreturn_t tw_interrupt(int irq, void *dev_instance) 
 {
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 89fc1c8af86b..f672491774eb 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -167,7 +167,7 @@ MODULE_LICENSE("GPL");
 #include "53c700_d.h"
 
 
-STATIC int NCR_700_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
+STATIC int NCR_700_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *);
 STATIC int NCR_700_abort(struct scsi_cmnd * SCpnt);
 STATIC int NCR_700_bus_reset(struct scsi_cmnd * SCpnt);
 STATIC int NCR_700_host_reset(struct scsi_cmnd * SCpnt);
@@ -1749,8 +1749,8 @@ NCR_700_intr(int irq, void *dev_id)
 	return IRQ_RETVAL(handled);
 }
 
-STATIC int
-NCR_700_queuecommand(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *))
+static int
+NCR_700_queuecommand_lck(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *))
 {
 	struct NCR_700_Host_Parameters *hostdata = 
 		(struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
@@ -1904,6 +1904,8 @@ NCR_700_queuecommand(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *))
 	return 0;
 }
 
+STATIC DEF_SCSI_QCMD(NCR_700_queuecommand)
+
 STATIC int
 NCR_700_abort(struct scsi_cmnd * SCp)
 {
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index fc0b4b81d552..f66c33b9ab41 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -2807,7 +2807,7 @@ static int BusLogic_host_reset(struct scsi_cmnd * SCpnt)
   Outgoing Mailbox for execution by the associated Host Adapter.
 */
 
-static int BusLogic_QueueCommand(struct scsi_cmnd *Command, void (*CompletionRoutine) (struct scsi_cmnd *))
+static int BusLogic_QueueCommand_lck(struct scsi_cmnd *Command, void (*CompletionRoutine) (struct scsi_cmnd *))
 {
 	struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) Command->device->host->hostdata;
 	struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[Command->device->id];
@@ -2994,6 +2994,7 @@ static int BusLogic_QueueCommand(struct scsi_cmnd *Command, void (*CompletionRou
 	return 0;
 }
 
+static DEF_SCSI_QCMD(BusLogic_QueueCommand)
 
 #if 0
 /*
diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h
index 73f237a1ed94..649fcb31f26d 100644
--- a/drivers/scsi/BusLogic.h
+++ b/drivers/scsi/BusLogic.h
@@ -1319,7 +1319,7 @@ static inline void BusLogic_IncrementSizeBucket(BusLogic_CommandSizeBuckets_T Co
 */
 
 static const char *BusLogic_DriverInfo(struct Scsi_Host *);
-static int BusLogic_QueueCommand(struct scsi_cmnd *, void (*CompletionRoutine) (struct scsi_cmnd *));
+static int BusLogic_QueueCommand(struct Scsi_Host *h, struct scsi_cmnd *);
 static int BusLogic_BIOSDiskParameters(struct scsi_device *, struct block_device *, sector_t, int *);
 static int BusLogic_ProcDirectoryInfo(struct Scsi_Host *, char *, char **, off_t, int, int);
 static int BusLogic_SlaveConfigure(struct scsi_device *);
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 5d2f148889ad..9a5629f94f95 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -952,7 +952,7 @@ static void NCR5380_exit(struct Scsi_Host *instance)
  *	Locks: host lock taken by caller
  */
 
-static int NCR5380_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *)) 
+static int NCR5380_queue_command_lck(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 {
 	struct Scsi_Host *instance = cmd->device->host;
 	struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
@@ -1021,6 +1021,7 @@ static int NCR5380_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(NCR5380_queue_command)
 
 /**
  *	NCR5380_main	-	NCR state machines
diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
index bdc468c9e1d9..fd40a32b1f6f 100644
--- a/drivers/scsi/NCR5380.h
+++ b/drivers/scsi/NCR5380.h
@@ -313,7 +313,7 @@ static void NCR5380_print(struct Scsi_Host *instance);
 #endif
 static int NCR5380_abort(Scsi_Cmnd * cmd);
 static int NCR5380_bus_reset(Scsi_Cmnd * cmd);
-static int NCR5380_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *));
+static int NCR5380_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
 static int __maybe_unused NCR5380_proc_info(struct Scsi_Host *instance,
 	char *buffer, char **start, off_t offset, int length, int inout);
 
diff --git a/drivers/scsi/NCR53c406a.c b/drivers/scsi/NCR53c406a.c
index 6961f78742ae..c91888a0a23c 100644
--- a/drivers/scsi/NCR53c406a.c
+++ b/drivers/scsi/NCR53c406a.c
@@ -693,7 +693,7 @@ static void wait_intr(void)
 }
 #endif
 
-static int NCR53c406a_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
+static int NCR53c406a_queue_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 {
 	int i;
 
@@ -726,6 +726,8 @@ static int NCR53c406a_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(NCR53c406a_queue)
+
 static int NCR53c406a_host_reset(Scsi_Cmnd * SCpnt)
 {
 	DEB(printk("NCR53c406a_reset called\n"));
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index dbbc601948e5..dc5ac6e528c4 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -911,7 +911,7 @@ static int inia100_build_scb(struct orc_host * host, struct orc_scb * scb, struc
  *	queue the command down to the controller
  */
 
-static int inia100_queue(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
+static int inia100_queue_lck(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
 {
 	struct orc_scb *scb;
 	struct orc_host *host;		/* Point to Host adapter control block */
@@ -930,6 +930,8 @@ static int inia100_queue(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd
 	return 0;
 }
 
+static DEF_SCSI_QCMD(inia100_queue)
+
 /*****************************************************************************
  Function name  : inia100_abort
  Description    : Abort a queued command.
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 29c0ed1cf507..2c93d9496d62 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -248,7 +248,7 @@ static struct aac_driver_ident aac_drivers[] = {
  *	TODO: unify with aac_scsi_cmd().
  */
 
-static int aac_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int aac_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct Scsi_Host *host = cmd->device->host;
 	struct aac_dev *dev = (struct aac_dev *)host->hostdata;
@@ -267,6 +267,8 @@ static int aac_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd
 	return (aac_scsi_cmd(cmd) ? FAILED : 0);
 }
 
+static DEF_SCSI_QCMD(aac_queuecommand)
+
 /**
  *	aac_info		-	Returns the host adapter name
  *	@shost:		Scsi host to report on
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 0ec3da6f3e12..081c6de92bc5 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -9500,7 +9500,7 @@ static int asc_execute_scsi_cmnd(struct scsi_cmnd *scp)
  * in the 'scp' result field.
  */
 static int
-advansys_queuecommand(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
+advansys_queuecommand_lck(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
 {
 	struct Scsi_Host *shost = scp->device->host;
 	int asc_res, result = 0;
@@ -9525,6 +9525,8 @@ advansys_queuecommand(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
 	return result;
 }
 
+static DEF_SCSI_QCMD(advansys_queuecommand)
+
 static ushort __devinit AscGetEisaChipCfg(PortAddr iop_base)
 {
 	PortAddr eisa_cfg_iop = (PortAddr) ASC_GET_EISA_SLOT(iop_base) |
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index 8eab8587ff21..c5169f01c1cd 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -1056,7 +1056,7 @@ static int aha152x_internal_queue(Scsi_Cmnd *SCpnt, struct completion *complete,
  *  queue a command
  *
  */
-static int aha152x_queue(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
+static int aha152x_queue_lck(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 {
 #if 0
 	if(*SCpnt->cmnd == REQUEST_SENSE) {
@@ -1070,6 +1070,8 @@ static int aha152x_queue(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 	return aha152x_internal_queue(SCpnt, NULL, 0, done);
 }
 
+static DEF_SCSI_QCMD(aha152x_queue)
+
 
 /*
  *  
diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c
index 4f785f254c1f..195823a51aab 100644
--- a/drivers/scsi/aha1542.c
+++ b/drivers/scsi/aha1542.c
@@ -558,7 +558,7 @@ static void aha1542_intr_handle(struct Scsi_Host *shost)
 	};
 }
 
-static int aha1542_queuecommand(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
+static int aha1542_queuecommand_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 {
 	unchar ahacmd = CMD_START_SCSI;
 	unchar direction;
@@ -718,6 +718,8 @@ static int aha1542_queuecommand(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(aha1542_queuecommand)
+
 /* Initialize mailboxes */
 static void setup_mailboxes(int bse, struct Scsi_Host *shpnt)
 {
diff --git a/drivers/scsi/aha1542.h b/drivers/scsi/aha1542.h
index 1db538552d56..b871d2b57f93 100644
--- a/drivers/scsi/aha1542.h
+++ b/drivers/scsi/aha1542.h
@@ -132,7 +132,7 @@ struct ccb {			/* Command Control Block 5.3 */
 };
 
 static int aha1542_detect(struct scsi_host_template *);
-static int aha1542_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int aha1542_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 static int aha1542_bus_reset(Scsi_Cmnd * SCpnt);
 static int aha1542_dev_reset(Scsi_Cmnd * SCpnt);
 static int aha1542_host_reset(Scsi_Cmnd * SCpnt);
diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c
index 0107a4cc3331..d058f1ab82b5 100644
--- a/drivers/scsi/aha1740.c
+++ b/drivers/scsi/aha1740.c
@@ -331,7 +331,7 @@ static irqreturn_t aha1740_intr_handle(int irq, void *dev_id)
 	return IRQ_RETVAL(handled);
 }
 
-static int aha1740_queuecommand(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *))
+static int aha1740_queuecommand_lck(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *))
 {
 	unchar direction;
 	unchar *cmd = (unchar *) SCpnt->cmnd;
@@ -503,6 +503,8 @@ static int aha1740_queuecommand(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(aha1740_queuecommand)
+
 /* Query the board for its irq_level and irq_type.  Nothing else matters
    in enhanced mode on an EISA bus. */
 
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 88ad8482ef59..25d066624476 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -573,7 +573,7 @@ ahd_linux_info(struct Scsi_Host *host)
  * Queue an SCB to the controller.
  */
 static int
-ahd_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
+ahd_linux_queue_lck(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
 {
 	struct	 ahd_softc *ahd;
 	struct	 ahd_linux_device *dev = scsi_transport_device_data(cmd->device);
@@ -588,6 +588,8 @@ ahd_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
 	return rtn;
 }
 
+static DEF_SCSI_QCMD(ahd_linux_queue)
+
 static struct scsi_target **
 ahd_linux_target_in_softc(struct scsi_target *starget)
 {
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index aeea7a61478e..4a359bb307c6 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -528,7 +528,7 @@ ahc_linux_info(struct Scsi_Host *host)
  * Queue an SCB to the controller.
  */
 static int
-ahc_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
+ahc_linux_queue_lck(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
 {
 	struct	 ahc_softc *ahc;
 	struct	 ahc_linux_device *dev = scsi_transport_device_data(cmd->device);
@@ -548,6 +548,8 @@ ahc_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
 	return rtn;
 }
 
+static DEF_SCSI_QCMD(ahc_linux_queue)
+
 static inline struct scsi_target **
 ahc_linux_target_in_softc(struct scsi_target *starget)
 {
diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c
index aee73fafccc8..4ff60a08df0f 100644
--- a/drivers/scsi/aic7xxx_old.c
+++ b/drivers/scsi/aic7xxx_old.c
@@ -10234,7 +10234,7 @@ static void aic7xxx_buildscb(struct aic7xxx_host *p, struct scsi_cmnd *cmd,
  * Description:
  *   Queue a SCB to the controller.
  *-F*************************************************************************/
-static int aic7xxx_queue(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
+static int aic7xxx_queue_lck(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
 {
   struct aic7xxx_host *p;
   struct aic7xxx_scb *scb;
@@ -10292,6 +10292,8 @@ static int aic7xxx_queue(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
   return (0);
 }
 
+static DEF_SCSI_QCMD(aic7xxx_queue)
+
 /*+F*************************************************************************
  * Function:
  *   aic7xxx_bus_device_reset
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index 05a78e515a24..17e3df4f016f 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -85,8 +85,7 @@ static int arcmsr_abort(struct scsi_cmnd *);
 static int arcmsr_bus_reset(struct scsi_cmnd *);
 static int arcmsr_bios_param(struct scsi_device *sdev,
 		struct block_device *bdev, sector_t capacity, int *info);
-static int arcmsr_queue_command(struct scsi_cmnd *cmd,
-					void (*done) (struct scsi_cmnd *));
+static int arcmsr_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd);
 static int arcmsr_probe(struct pci_dev *pdev,
 				const struct pci_device_id *id);
 static void arcmsr_remove(struct pci_dev *pdev);
@@ -2081,7 +2080,7 @@ static void arcmsr_handle_virtual_command(struct AdapterControlBlock *acb,
 	}
 }
 
-static int arcmsr_queue_command(struct scsi_cmnd *cmd,
+static int arcmsr_queue_command_lck(struct scsi_cmnd *cmd,
 	void (* done)(struct scsi_cmnd *))
 {
 	struct Scsi_Host *host = cmd->device->host;
@@ -2124,6 +2123,8 @@ static int arcmsr_queue_command(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(arcmsr_queue_command)
+
 static bool arcmsr_get_hba_config(struct AdapterControlBlock *acb)
 {
 	struct MessageUnit_A __iomem *reg = acb->pmuA;
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index 918ccf818757..ec166726b314 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -2511,7 +2511,7 @@ acornscsi_intr(int irq, void *dev_id)
  *	      done - function called on completion, with pointer to command descriptor
  * Returns  : 0, or < 0 on error.
  */
-int acornscsi_queuecmd(struct scsi_cmnd *SCpnt,
+static int acornscsi_queuecmd_lck(struct scsi_cmnd *SCpnt,
 		       void (*done)(struct scsi_cmnd *))
 {
     AS_Host *host = (AS_Host *)SCpnt->device->host->hostdata;
@@ -2561,6 +2561,8 @@ int acornscsi_queuecmd(struct scsi_cmnd *SCpnt,
     return 0;
 }
 
+DEF_SCSI_QCMD(acornscsi_queuecmd)
+
 /*
  * Prototype: void acornscsi_reportstatus(struct scsi_cmnd **SCpntp1, struct scsi_cmnd **SCpntp2, int result)
  * Purpose  : pass a result to *SCpntp1, and check if *SCpntp1 = *SCpntp2
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index 9e71ac611146..2b2ce21e227e 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2198,7 +2198,7 @@ no_command:
  * Returns: 0 on success, else error.
  * Notes: io_request_lock is held, interrupts are disabled.
  */
-int fas216_queue_command(struct scsi_cmnd *SCpnt,
+static int fas216_queue_command_lck(struct scsi_cmnd *SCpnt,
 			 void (*done)(struct scsi_cmnd *))
 {
 	FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
@@ -2240,6 +2240,8 @@ int fas216_queue_command(struct scsi_cmnd *SCpnt,
 	return result;
 }
 
+DEF_SCSI_QCMD(fas216_queue_command)
+
 /**
  * fas216_internal_done - trigger restart of a waiting thread in fas216_noqueue_command
  * @SCpnt: Command to wake
@@ -2263,7 +2265,7 @@ static void fas216_internal_done(struct scsi_cmnd *SCpnt)
  * Returns: scsi result code.
  * Notes: io_request_lock is held, interrupts are disabled.
  */
-int fas216_noqueue_command(struct scsi_cmnd *SCpnt,
+static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt,
 			   void (*done)(struct scsi_cmnd *))
 {
 	FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
@@ -2277,7 +2279,7 @@ int fas216_noqueue_command(struct scsi_cmnd *SCpnt,
 	BUG_ON(info->scsi.irq != NO_IRQ);
 
 	info->internal_done = 0;
-	fas216_queue_command(SCpnt, fas216_internal_done);
+	fas216_queue_command_lck(SCpnt, fas216_internal_done);
 
 	/*
 	 * This wastes time, since we can't return until the command is
@@ -2310,6 +2312,8 @@ int fas216_noqueue_command(struct scsi_cmnd *SCpnt,
 	return 0;
 }
 
+DEF_SCSI_QCMD(fas216_noqueue_command)
+
 /*
  * Error handler timeout function.  Indicate that we timed out,
  * and wake up any error handler process so it can continue.
diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h
index b65f4cf0eec9..377cfb72cc66 100644
--- a/drivers/scsi/arm/fas216.h
+++ b/drivers/scsi/arm/fas216.h
@@ -331,23 +331,21 @@ extern int fas216_init (struct Scsi_Host *instance);
  */
 extern int fas216_add (struct Scsi_Host *instance, struct device *dev);
 
-/* Function: int fas216_queue_command(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+/* Function: int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt)
  * Purpose : queue a command for adapter to process.
- * Params  : SCpnt - Command to queue
- *	     done  - done function to call once command is complete
+ * Params  : h - host adapter
+ *	   : SCpnt - Command to queue
  * Returns : 0 - success, else error
  */
-extern int fas216_queue_command(struct scsi_cmnd *,
-				void (*done)(struct scsi_cmnd *));
+extern int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt);
 
-/* Function: int fas216_noqueue_command(istruct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+/* Function: int fas216_noqueue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt)
  * Purpose : queue a command for adapter to process, and process it to completion.
- * Params  : SCpnt - Command to queue
- *	     done  - done function to call once command is complete
+ * Params  : h - host adapter
+ *	   : SCpnt - Command to queue
  * Returns : 0 - success, else error
  */
-extern int fas216_noqueue_command(struct scsi_cmnd *,
-				  void (*done)(struct scsi_cmnd *));
+extern int fas216_noqueue_command(struct Scsi_Host *, struct scsi_cmnd *)
 
 /* Function: irqreturn_t fas216_intr (FAS216_Info *info)
  * Purpose : handle interrupts from the interface to progress a command
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 158ebc3644d8..88b2928b4d3b 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -910,7 +910,7 @@ static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
  *
  */
 
-static int NCR5380_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
+static int NCR5380_queue_command_lck(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
 {
 	SETUP_HOSTDATA(cmd->device->host);
 	Scsi_Cmnd *tmp;
@@ -1022,6 +1022,8 @@ static int NCR5380_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(NCR5380_queue_command)
+
 /*
  * Function : NCR5380_main (void)
  *
diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index ad7a23aef0ec..3e8658e2f154 100644
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -572,23 +572,6 @@ static void falcon_get_lock(void)
 }
 
 
-/* This is the wrapper function for NCR5380_queue_command(). It just
- * tries to get the lock on the ST-DMA (see above) and then calls the
- * original function.
- */
-
-#if 0
-int atari_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
-{
-	/* falcon_get_lock();
-	 * ++guenther: moved to NCR5380_queue_command() to prevent
-	 * race condition, see there for an explanation.
-	 */
-	return NCR5380_queue_command(cmd, done);
-}
-#endif
-
-
 int __init atari_scsi_detect(struct scsi_host_template *host)
 {
 	static int called = 0;
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index ab5bdda6903e..76029d570beb 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -605,7 +605,7 @@ handled:
  *
  *	Queue a command to the ATP queue. Called with the host lock held.
  */
-static int atp870u_queuecommand(struct scsi_cmnd * req_p, 
+static int atp870u_queuecommand_lck(struct scsi_cmnd *req_p,
 			 void (*done) (struct scsi_cmnd *))
 {
 	unsigned char c;
@@ -694,6 +694,8 @@ static int atp870u_queuecommand(struct scsi_cmnd * req_p,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(atp870u_queuecommand)
+
 /**
  *	send_s870	-	send a command to the controller
  *	@host: host
diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c
index 8daa716739d1..8ca967dee66d 100644
--- a/drivers/scsi/bfa/bfad_im.c
+++ b/drivers/scsi/bfa/bfad_im.c
@@ -30,8 +30,7 @@ DEFINE_IDR(bfad_im_port_index);
 struct scsi_transport_template *bfad_im_scsi_transport_template;
 struct scsi_transport_template *bfad_im_scsi_vport_transport_template;
 static void bfad_im_itnim_work_handler(struct work_struct *work);
-static int bfad_im_queuecommand(struct scsi_cmnd *cmnd,
-				void (*done)(struct scsi_cmnd *));
+static int bfad_im_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmnd);
 static int bfad_im_slave_alloc(struct scsi_device *sdev);
 static void bfad_im_fc_rport_add(struct bfad_im_port_s  *im_port,
 				struct bfad_itnim_s *itnim);
@@ -1120,7 +1119,7 @@ bfad_im_itnim_work_handler(struct work_struct *work)
  * Scsi_Host template entry, queue a SCSI command to the BFAD.
  */
 static int
-bfad_im_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
+bfad_im_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 {
 	struct bfad_im_port_s *im_port =
 		(struct bfad_im_port_s *) cmnd->device->host->hostdata[0];
@@ -1187,6 +1186,8 @@ out_fail_cmd:
 	return 0;
 }
 
+static DEF_SCSI_QCMD(bfad_im_queuecommand)
+
 void
 bfad_os_rport_online_wait(struct bfad_s *bfad)
 {
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 54f50b07dac7..8f1b5c8bf903 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -1080,7 +1080,7 @@ static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
  *        and is expected to be held on return.
  *
  **/
-static int dc395x_queue_command(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int dc395x_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct DeviceCtlBlk *dcb;
 	struct ScsiReqBlk *srb;
@@ -1154,6 +1154,7 @@ complete:
 	return 0;
 }
 
+static DEF_SCSI_QCMD(dc395x_queue_command)
 
 /*
  * Return the disk geometry for the given SCSI device.
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 23dec0063385..cffcb108ac96 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -423,7 +423,7 @@ static int adpt_slave_configure(struct scsi_device * device)
 	return 0;
 }
 
-static int adpt_queue(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
+static int adpt_queue_lck(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
 {
 	adpt_hba* pHba = NULL;
 	struct adpt_device* pDev = NULL;	/* dpt per device information */
@@ -491,6 +491,8 @@ static int adpt_queue(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
 	return adpt_scsi_to_i2o(pHba, cmd, pDev);
 }
 
+static DEF_SCSI_QCMD(adpt_queue)
+
 static int adpt_bios_param(struct scsi_device *sdev, struct block_device *dev,
 		sector_t capacity, int geom[])
 {
diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h
index 337746d46043..beded716f93f 100644
--- a/drivers/scsi/dpti.h
+++ b/drivers/scsi/dpti.h
@@ -29,7 +29,7 @@
  */
 
 static int adpt_detect(struct scsi_host_template * sht);
-static int adpt_queue(struct scsi_cmnd * cmd, void (*cmdcomplete) (struct scsi_cmnd *));
+static int adpt_queue(struct Scsi_Host *h, struct scsi_cmnd * cmd);
 static int adpt_abort(struct scsi_cmnd * cmd);
 static int adpt_reset(struct scsi_cmnd* cmd);
 static int adpt_release(struct Scsi_Host *host);
diff --git a/drivers/scsi/dtc.h b/drivers/scsi/dtc.h
index 0b205f8c7326..cdc621204b66 100644
--- a/drivers/scsi/dtc.h
+++ b/drivers/scsi/dtc.h
@@ -36,7 +36,7 @@ static int dtc_abort(Scsi_Cmnd *);
 static int dtc_biosparam(struct scsi_device *, struct block_device *,
 		         sector_t, int*);
 static int dtc_detect(struct scsi_host_template *);
-static int dtc_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int dtc_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
 static int dtc_bus_reset(Scsi_Cmnd *);
 
 #ifndef CMD_PER_LUN
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index d1c31378f6da..53925ac178fd 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -505,8 +505,7 @@
 
 static int eata2x_detect(struct scsi_host_template *);
 static int eata2x_release(struct Scsi_Host *);
-static int eata2x_queuecommand(struct scsi_cmnd *,
-			       void (*done) (struct scsi_cmnd *));
+static int eata2x_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 static int eata2x_eh_abort(struct scsi_cmnd *);
 static int eata2x_eh_host_reset(struct scsi_cmnd *);
 static int eata2x_bios_param(struct scsi_device *, struct block_device *,
@@ -1758,7 +1757,7 @@ static void scsi_to_dev_dir(unsigned int i, struct hostdata *ha)
 
 }
 
-static int eata2x_queuecommand(struct scsi_cmnd *SCpnt,
+static int eata2x_queuecommand_lck(struct scsi_cmnd *SCpnt,
 			       void (*done) (struct scsi_cmnd *))
 {
 	struct Scsi_Host *shost = SCpnt->device->host;
@@ -1843,6 +1842,8 @@ static int eata2x_queuecommand(struct scsi_cmnd *SCpnt,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(eata2x_queuecommand)
+
 static int eata2x_eh_abort(struct scsi_cmnd *SCarg)
 {
 	struct Scsi_Host *shost = SCarg->device->host;
diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c
index 60886c19065e..4a9641e69f54 100644
--- a/drivers/scsi/eata_pio.c
+++ b/drivers/scsi/eata_pio.c
@@ -335,7 +335,7 @@ static inline unsigned int eata_pio_send_command(unsigned long base, unsigned ch
 	return 0;
 }
 
-static int eata_pio_queue(struct scsi_cmnd *cmd,
+static int eata_pio_queue_lck(struct scsi_cmnd *cmd,
 		void (*done)(struct scsi_cmnd *))
 {
 	unsigned int x, y;
@@ -438,6 +438,8 @@ static int eata_pio_queue(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(eata_pio_queue)
+
 static int eata_pio_abort(struct scsi_cmnd *cmd)
 {
 	unsigned int loop = 100;
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index e2bc779f86c1..57558523c1b8 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -916,7 +916,7 @@ static void esp_event_queue_full(struct esp *esp, struct esp_cmd_entry *ent)
 	scsi_track_queue_full(dev, lp->num_tagged - 1);
 }
 
-static int esp_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int esp_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct scsi_device *dev = cmd->device;
 	struct esp *esp = shost_priv(dev->host);
@@ -941,6 +941,8 @@ static int esp_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd
 	return 0;
 }
 
+static DEF_SCSI_QCMD(esp_queuecommand)
+
 static int esp_check_gross_error(struct esp *esp)
 {
 	if (esp->sreg & ESP_STAT_SPAM) {
diff --git a/drivers/scsi/fd_mcs.c b/drivers/scsi/fd_mcs.c
index 2ad95aa8f585..a2c6135d337e 100644
--- a/drivers/scsi/fd_mcs.c
+++ b/drivers/scsi/fd_mcs.c
@@ -1072,7 +1072,7 @@ static int fd_mcs_release(struct Scsi_Host *shpnt)
 	return 0;
 }
 
-static int fd_mcs_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
+static int fd_mcs_queue_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 {
 	struct Scsi_Host *shpnt = SCpnt->device->host;
 
@@ -1122,6 +1122,8 @@ static int fd_mcs_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(fd_mcs_queue)
+
 #if DEBUG_ABORT || DEBUG_RESET
 static void fd_mcs_print_info(Scsi_Cmnd * SCpnt)
 {
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index e296bcc57d5c..69b7aa54f43f 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -1419,7 +1419,7 @@ static irqreturn_t do_fdomain_16x0_intr(int irq, void *dev_id)
    return IRQ_HANDLED;
 }
 
-static int fdomain_16x0_queue(struct scsi_cmnd *SCpnt,
+static int fdomain_16x0_queue_lck(struct scsi_cmnd *SCpnt,
 		void (*done)(struct scsi_cmnd *))
 {
    if (in_command) {
@@ -1469,6 +1469,8 @@ static int fdomain_16x0_queue(struct scsi_cmnd *SCpnt,
    return 0;
 }
 
+static DEF_SCSI_QCMD(fdomain_16x0_queue)
+
 #if DEBUG_ABORT
 static void print_info(struct scsi_cmnd *SCpnt)
 {
diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
index cbb20b13b228..92f185081e62 100644
--- a/drivers/scsi/fnic/fnic.h
+++ b/drivers/scsi/fnic/fnic.h
@@ -246,7 +246,7 @@ void fnic_set_port_id(struct fc_lport *, u32, struct fc_frame *);
 void fnic_update_mac(struct fc_lport *, u8 *new);
 void fnic_update_mac_locked(struct fnic *, u8 *new);
 
-int fnic_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
+int fnic_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 int fnic_abort_cmd(struct scsi_cmnd *);
 int fnic_device_reset(struct scsi_cmnd *);
 int fnic_host_reset(struct scsi_cmnd *);
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 198cbab3e894..22d02404d15f 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -349,7 +349,7 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic,
  * Routine to send a scsi cdb
  * Called with host_lock held and interrupts disabled.
  */
-int fnic_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
+static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 {
 	struct fc_lport *lp;
 	struct fc_rport *rport;
@@ -457,6 +457,8 @@ out:
 	return ret;
 }
 
+DEF_SCSI_QCMD(fnic_queuecommand)
+
 /*
  * fnic_fcpio_fw_reset_cmpl_handler
  * Routine to handle fw reset completion
diff --git a/drivers/scsi/g_NCR5380.h b/drivers/scsi/g_NCR5380.h
index 921764c9ab24..1bcdb7beb77b 100644
--- a/drivers/scsi/g_NCR5380.h
+++ b/drivers/scsi/g_NCR5380.h
@@ -46,7 +46,7 @@
 static int generic_NCR5380_abort(Scsi_Cmnd *);
 static int generic_NCR5380_detect(struct scsi_host_template *);
 static int generic_NCR5380_release_resources(struct Scsi_Host *);
-static int generic_NCR5380_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int generic_NCR5380_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
 static int generic_NCR5380_bus_reset(Scsi_Cmnd *);
 static const char* generic_NCR5380_info(struct Scsi_Host *);
 
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 841101846b88..76365700e2d5 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -185,7 +185,7 @@ static long gdth_unlocked_ioctl(struct file *filep, unsigned int cmd,
 			        unsigned long arg);
 
 static void gdth_flush(gdth_ha_str *ha);
-static int gdth_queuecommand(Scsi_Cmnd *scp,void (*done)(Scsi_Cmnd *));
+static int gdth_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmd);
 static int __gdth_queuecommand(gdth_ha_str *ha, struct scsi_cmnd *scp,
 				struct gdth_cmndinfo *cmndinfo);
 static void gdth_scsi_done(struct scsi_cmnd *scp);
@@ -4004,7 +4004,7 @@ static int gdth_bios_param(struct scsi_device *sdev,struct block_device *bdev,se
 }
 
 
-static int gdth_queuecommand(struct scsi_cmnd *scp,
+static int gdth_queuecommand_lck(struct scsi_cmnd *scp,
 				void (*done)(struct scsi_cmnd *))
 {
     gdth_ha_str *ha = shost_priv(scp->device->host);
@@ -4022,6 +4022,8 @@ static int gdth_queuecommand(struct scsi_cmnd *scp,
     return __gdth_queuecommand(ha, scp, cmndinfo);
 }
 
+static DEF_SCSI_QCMD(gdth_queuecommand)
+
 static int __gdth_queuecommand(gdth_ha_str *ha, struct scsi_cmnd *scp,
 				struct gdth_cmndinfo *cmndinfo)
 {
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index c5d0606ad097..3759d1199b0c 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -143,8 +143,7 @@ static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 	void *buff, size_t size, u8 page_code, unsigned char *scsi3addr,
 	int cmd_type);
 
-static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd,
-		void (*done)(struct scsi_cmnd *));
+static int hpsa_scsi_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd);
 static void hpsa_scan_start(struct Scsi_Host *);
 static int hpsa_scan_finished(struct Scsi_Host *sh,
 	unsigned long elapsed_time);
@@ -1926,7 +1925,7 @@ sglist_finished:
 }
 
 
-static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd,
+static int hpsa_scsi_queue_command_lck(struct scsi_cmnd *cmd,
 	void (*done)(struct scsi_cmnd *))
 {
 	struct ctlr_info *h;
@@ -2020,6 +2019,8 @@ static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(hpsa_scsi_queue_command)
+
 static void hpsa_scan_start(struct Scsi_Host *sh)
 {
 	struct ctlr_info *h = shost_to_hba(sh);
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index 0729f150b33a..10b65556937b 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -751,7 +751,7 @@ static void hptiop_post_req_mv(struct hptiop_hba *hba,
 		MVIOP_MU_QUEUE_ADDR_HOST_BIT | size_bit, hba);
 }
 
-static int hptiop_queuecommand(struct scsi_cmnd *scp,
+static int hptiop_queuecommand_lck(struct scsi_cmnd *scp,
 				void (*done)(struct scsi_cmnd *))
 {
 	struct Scsi_Host *host = scp->device->host;
@@ -819,6 +819,8 @@ cmd_done:
 	return 0;
 }
 
+static DEF_SCSI_QCMD(hptiop_queuecommand)
+
 static const char *hptiop_info(struct Scsi_Host *host)
 {
 	return driver_name_long;
diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c
index 9a4b69d4f4eb..67fc8ffd52e6 100644
--- a/drivers/scsi/ibmmca.c
+++ b/drivers/scsi/ibmmca.c
@@ -39,7 +39,7 @@
 #include <scsi/scsi_host.h>
 
 /* Common forward declarations for all Linux-versions: */
-static int ibmmca_queuecommand (Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
+static int ibmmca_queuecommand (struct Scsi_Host *, struct scsi_cmnd *);
 static int ibmmca_abort (Scsi_Cmnd *);
 static int ibmmca_host_reset (Scsi_Cmnd *);
 static int ibmmca_biosparam (struct scsi_device *, struct block_device *, sector_t, int *);
@@ -1691,7 +1691,7 @@ static int __devexit ibmmca_remove(struct device *dev)
 }
 
 /* The following routine is the SCSI command queue for the midlevel driver */
-static int ibmmca_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
+static int ibmmca_queuecommand_lck(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 {
 	unsigned int ldn;
 	unsigned int scsi_cmd;
@@ -1996,6 +1996,8 @@ static int ibmmca_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(ibmmca_queuecommand)
+
 static int __ibmmca_abort(Scsi_Cmnd * cmd)
 {
 	/* Abort does not work, as the adapter never generates an interrupt on
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 00d08b25425f..57cad7e20caa 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -1606,7 +1606,7 @@ static inline int ibmvfc_host_chkready(struct ibmvfc_host *vhost)
  * Returns:
  *	0 on success / other on failure
  **/
-static int ibmvfc_queuecommand(struct scsi_cmnd *cmnd,
+static int ibmvfc_queuecommand_lck(struct scsi_cmnd *cmnd,
 			       void (*done) (struct scsi_cmnd *))
 {
 	struct ibmvfc_host *vhost = shost_priv(cmnd->device->host);
@@ -1672,6 +1672,8 @@ static int ibmvfc_queuecommand(struct scsi_cmnd *cmnd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(ibmvfc_queuecommand)
+
 /**
  * ibmvfc_sync_completion - Signal that a synchronous command has completed
  * @evt:	ibmvfc event struct
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 67f78a470f5f..041958453e2a 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -713,7 +713,7 @@ static inline u16 lun_from_dev(struct scsi_device *dev)
  * @cmd:	struct scsi_cmnd to be executed
  * @done:	Callback function to be called when cmd is completed
 */
-static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd,
+static int ibmvscsi_queuecommand_lck(struct scsi_cmnd *cmnd,
 				 void (*done) (struct scsi_cmnd *))
 {
 	struct srp_cmd *srp_cmd;
@@ -766,6 +766,8 @@ static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd,
 	return ibmvscsi_send_srp_event(evt_struct, hostdata, 0);
 }
 
+static DEF_SCSI_QCMD(ibmvscsi_queuecommand)
+
 /* ------------------------------------------------------------
  * Routines for driver initialization
  */
diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index 4734ab0b3ff6..99aa0e5699bc 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -926,7 +926,7 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
 	return 0;
 }
 
-static int imm_queuecommand(struct scsi_cmnd *cmd,
+static int imm_queuecommand_lck(struct scsi_cmnd *cmd,
 		void (*done)(struct scsi_cmnd *))
 {
 	imm_struct *dev = imm_dev(cmd->device->host);
@@ -949,6 +949,8 @@ static int imm_queuecommand(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(imm_queuecommand)
+
 /*
  * Apparently the disk->capacity attribute is off by 1 sector 
  * for all disk drives.  We add the one here, but it should really
diff --git a/drivers/scsi/in2000.c b/drivers/scsi/in2000.c
index 52bdc6df6b92..6568aab745a0 100644
--- a/drivers/scsi/in2000.c
+++ b/drivers/scsi/in2000.c
@@ -334,7 +334,7 @@ static uchar calc_sync_xfer(unsigned int period, unsigned int offset)
 
 static void in2000_execute(struct Scsi_Host *instance);
 
-static int in2000_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
+static int in2000_queuecommand_lck(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 {
 	struct Scsi_Host *instance;
 	struct IN2000_hostdata *hostdata;
@@ -431,6 +431,8 @@ static int in2000_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 	    return 0;
 }
 
+static DEF_SCSI_QCMD(in2000_queuecommand)
+
 
 
 /*
diff --git a/drivers/scsi/in2000.h b/drivers/scsi/in2000.h
index 0fb8b06b8392..5821e1fbce08 100644
--- a/drivers/scsi/in2000.h
+++ b/drivers/scsi/in2000.h
@@ -396,7 +396,7 @@ struct IN2000_hostdata {
 							   flags)
 
 static int in2000_detect(struct scsi_host_template *) in2000__INIT;
-static int in2000_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int in2000_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 static int in2000_abort(Scsi_Cmnd *);
 static void in2000_setup(char *, int *) in2000__INIT;
 static int in2000_biosparam(struct scsi_device *, struct block_device *,
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 108797761b95..9627d062e16b 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -2639,7 +2639,7 @@ static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * c
  *	will cause the mid layer to call us again later with the command)
  */
 
-static int i91u_queuecommand(struct scsi_cmnd *cmd,
+static int i91u_queuecommand_lck(struct scsi_cmnd *cmd,
 		void (*done)(struct scsi_cmnd *))
 {
 	struct initio_host *host = (struct initio_host *) cmd->device->host->hostdata;
@@ -2656,6 +2656,8 @@ static int i91u_queuecommand(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(i91u_queuecommand)
+
 /**
  *	i91u_bus_reset		-	reset the SCSI bus
  *	@cmnd: Command block we want to trigger the reset for
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index fa60d7df44be..5bbaee597e88 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -5709,7 +5709,7 @@ static void ipr_scsi_done(struct ipr_cmnd *ipr_cmd)
  *	SCSI_MLQUEUE_DEVICE_BUSY if device is busy
  *	SCSI_MLQUEUE_HOST_BUSY if host is busy
  **/
-static int ipr_queuecommand(struct scsi_cmnd *scsi_cmd,
+static int ipr_queuecommand_lck(struct scsi_cmnd *scsi_cmd,
 			    void (*done) (struct scsi_cmnd *))
 {
 	struct ipr_ioa_cfg *ioa_cfg;
@@ -5792,6 +5792,8 @@ static int ipr_queuecommand(struct scsi_cmnd *scsi_cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(ipr_queuecommand)
+
 /**
  * ipr_ioctl - IOCTL handler
  * @sdev:	scsi device struct
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index f83a116955f2..b2511acd39bd 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -232,7 +232,7 @@ static int ips_detect(struct scsi_host_template *);
 static int ips_release(struct Scsi_Host *);
 static int ips_eh_abort(struct scsi_cmnd *);
 static int ips_eh_reset(struct scsi_cmnd *);
-static int ips_queue(struct scsi_cmnd *, void (*)(struct scsi_cmnd *));
+static int ips_queue(struct Scsi_Host *, struct scsi_cmnd *);
 static const char *ips_info(struct Scsi_Host *);
 static irqreturn_t do_ipsintr(int, void *);
 static int ips_hainit(ips_ha_t *);
@@ -1046,7 +1046,7 @@ static int ips_eh_reset(struct scsi_cmnd *SC)
 /*    Linux obtains io_request_lock before calling this function            */
 /*                                                                          */
 /****************************************************************************/
-static int ips_queue(struct scsi_cmnd *SC, void (*done) (struct scsi_cmnd *))
+static int ips_queue_lck(struct scsi_cmnd *SC, void (*done) (struct scsi_cmnd *))
 {
 	ips_ha_t *ha;
 	ips_passthru_t *pt;
@@ -1137,6 +1137,8 @@ static int ips_queue(struct scsi_cmnd *SC, void (*done) (struct scsi_cmnd *))
 	return (0);
 }
 
+static DEF_SCSI_QCMD(ips_queue)
+
 /****************************************************************************/
 /*                                                                          */
 /* Routine Name: ips_biosparam                                              */
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index e340373b509b..2924363d142b 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -1753,7 +1753,7 @@ static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
  * This is the i/o strategy routine, called by the SCSI layer. This routine
  * is called with the host_lock held.
  */
-int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
+static int fc_queuecommand_lck(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct fc_lport *lport;
 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
@@ -1851,6 +1851,8 @@ out:
 	spin_lock_irq(lport->host->host_lock);
 	return rc;
 }
+
+DEF_SCSI_QCMD(fc_queuecommand)
 EXPORT_SYMBOL(fc_queuecommand);
 
 /**
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 633e09036357..c15fde808c33 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1599,7 +1599,7 @@ enum {
 	FAILURE_SESSION_NOT_READY,
 };
 
-int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
+static int iscsi_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 {
 	struct iscsi_cls_session *cls_session;
 	struct Scsi_Host *host;
@@ -1736,6 +1736,8 @@ fault:
 	spin_lock(host->host_lock);
 	return 0;
 }
+
+DEF_SCSI_QCMD(iscsi_queuecommand)
 EXPORT_SYMBOL_GPL(iscsi_queuecommand);
 
 int iscsi_change_queue_depth(struct scsi_device *sdev, int depth, int reason)
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 55f09e92ab59..29251fabecc6 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -189,7 +189,7 @@ int sas_queue_up(struct sas_task *task)
  * Note: XXX: Remove the host unlock/lock pair when SCSI Core can
  * call us without holding an IRQ spinlock...
  */
-int sas_queuecommand(struct scsi_cmnd *cmd,
+static int sas_queuecommand_lck(struct scsi_cmnd *cmd,
 		     void (*scsi_done)(struct scsi_cmnd *))
 	__releases(host->host_lock)
 	__acquires(dev->sata_dev.ap->lock)
@@ -254,6 +254,8 @@ out:
 	return res;
 }
 
+DEF_SCSI_QCMD(sas_queuecommand)
+
 static void sas_eh_finish_cmd(struct scsi_cmnd *cmd)
 {
 	struct sas_task *task = TO_SAS_TASK(cmd);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index f64b65a770b8..581837b3c71a 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -2899,7 +2899,7 @@ void lpfc_poll_timeout(unsigned long ptr)
  *   SCSI_MLQUEUE_HOST_BUSY - Block all devices served by this host temporarily.
  **/
 static int
-lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
+lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 {
 	struct Scsi_Host  *shost = cmnd->device->host;
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
@@ -3060,6 +3060,8 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(lpfc_queuecommand)
+
 /**
  * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point
  * @cmnd: Pointer to scsi_cmnd data structure.
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index 3ddb4dc62d5d..6c42dff0f4d3 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -66,7 +66,7 @@ static void cmd_done(struct fsc_state *, int result);
 static void set_dma_cmds(struct fsc_state *, struct scsi_cmnd *);
 
 
-static int mac53c94_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int mac53c94_queue_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct fsc_state *state;
 
@@ -99,6 +99,8 @@ static int mac53c94_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *
 	return 0;
 }
 
+static DEF_SCSI_QCMD(mac53c94_queue)
+
 static int mac53c94_host_reset(struct scsi_cmnd *cmd)
 {
 	struct fsc_state *state = (struct fsc_state *) cmd->device->host->hostdata;
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 7ceb5cf12c6b..9aa048525eb2 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -366,7 +366,7 @@ mega_runpendq(adapter_t *adapter)
  * The command queuing entry point for the mid-layer.
  */
 static int
-megaraid_queue(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
+megaraid_queue_lck(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
 {
 	adapter_t	*adapter;
 	scb_t	*scb;
@@ -409,6 +409,8 @@ megaraid_queue(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
 	return busy;
 }
 
+static DEF_SCSI_QCMD(megaraid_queue)
+
 /**
  * mega_allocate_scb()
  * @adapter - pointer to our soft state
@@ -4456,7 +4458,7 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru)
 
 	scb->idx = CMDID_INT_CMDS;
 
-	megaraid_queue(scmd, mega_internal_done);
+	megaraid_queue_lck(scmd, mega_internal_done);
 
 	wait_for_completion(&adapter->int_waitq);
 
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index 2b4a048cadf1..f5644745e24e 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -987,7 +987,7 @@ static int mega_query_adapter(adapter_t *);
 static int issue_scb(adapter_t *, scb_t *);
 static int mega_setup_mailbox(adapter_t *);
 
-static int megaraid_queue (Scsi_Cmnd *, void (*)(Scsi_Cmnd *));
+static int megaraid_queue (struct Scsi_Host *, struct scsi_cmnd *);
 static scb_t * mega_build_cmd(adapter_t *, Scsi_Cmnd *, int *);
 static void __mega_runpendq(adapter_t *);
 static int issue_scb_block(adapter_t *, u_char *);
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index a7810a106b37..5708cb27d078 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -113,8 +113,7 @@ static int megaraid_mbox_fire_sync_cmd(adapter_t *);
 static void megaraid_mbox_display_scb(adapter_t *, scb_t *);
 static void megaraid_mbox_setup_device_map(adapter_t *);
 
-static int megaraid_queue_command(struct scsi_cmnd *,
-		void (*)(struct scsi_cmnd *));
+static int megaraid_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
 static scb_t *megaraid_mbox_build_cmd(adapter_t *, struct scsi_cmnd *, int *);
 static void megaraid_mbox_runpendq(adapter_t *, scb_t *);
 static void megaraid_mbox_prepare_pthru(adapter_t *, scb_t *,
@@ -1484,7 +1483,7 @@ mbox_post_cmd(adapter_t *adapter, scb_t *scb)
  * Queue entry point for mailbox based controllers.
  */
 static int
-megaraid_queue_command(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
+megaraid_queue_command_lck(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
 {
 	adapter_t	*adapter;
 	scb_t		*scb;
@@ -1513,6 +1512,8 @@ megaraid_queue_command(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
 	return if_busy;
 }
 
+static DEF_SCSI_QCMD(megaraid_queue_command)
+
 /**
  * megaraid_mbox_build_cmd - transform the mid-layer scsi commands
  * @adapter	: controller's soft state
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index eb29d5085131..7451bc096a01 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -1334,7 +1334,7 @@ megasas_dump_pending_frames(struct megasas_instance *instance)
  * @done:			Callback entry point
  */
 static int
-megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
+megasas_queue_command_lck(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
 {
 	u32 frame_count;
 	struct megasas_cmd *cmd;
@@ -1417,6 +1417,8 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(megasas_queue_command)
+
 static struct megasas_instance *megasas_lookup_instance(u16 host_no)
 {
 	int i;
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index 1f784fde2510..197aa1b3f0f3 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -1627,7 +1627,7 @@ static void cmd_complete(struct mesh_state *ms)
  * Called by midlayer with host locked to queue a new
  * request
  */
-static int mesh_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int mesh_queue_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct mesh_state *ms;
 
@@ -1648,6 +1648,8 @@ static int mesh_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(mesh_queue)
+
 /*
  * Called to handle interrupts, either call by the interrupt
  * handler (do_mesh_interrupt) or by other functions in
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 16e99b686354..1a96a00418a4 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -3315,7 +3315,7 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
  * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
  */
 static int
-_scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
+_scsih_qcmd_lck(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT2SAS_DEVICE *sas_device_priv_data;
@@ -3441,6 +3441,8 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 	return SCSI_MLQUEUE_HOST_BUSY;
 }
 
+static DEF_SCSI_QCMD(_scsih_qcmd)
+
 /**
  * _scsih_normalize_sense - normalize descriptor and fixed format sense data
  * @sense_buffer: sense data returned by target
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index d013a2aa2fd5..46cc3825638d 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -8029,7 +8029,7 @@ static int ncr53c8xx_slave_configure(struct scsi_device *device)
 	return 0;
 }
 
-static int ncr53c8xx_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
+static int ncr53c8xx_queue_command_lck (struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
      struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb;
      unsigned long flags;
@@ -8068,6 +8068,8 @@ printk("ncr53c8xx : command successfully queued\n");
      return sts;
 }
 
+static DEF_SCSI_QCMD(ncr53c8xx_queue_command)
+
 irqreturn_t ncr53c8xx_intr(int irq, void *dev_id)
 {
      unsigned long flags;
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 4c1e54545200..6b8b021400f8 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -196,8 +196,7 @@ static void __exit    exit_nsp32  (void);
 static int         nsp32_proc_info   (struct Scsi_Host *, char *, char **, off_t, int, int);
 
 static int         nsp32_detect      (struct pci_dev *pdev);
-static int         nsp32_queuecommand(struct scsi_cmnd *,
-		void (*done)(struct scsi_cmnd *));
+static int         nsp32_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 static const char *nsp32_info        (struct Scsi_Host *);
 static int         nsp32_release     (struct Scsi_Host *);
 
@@ -909,7 +908,7 @@ static int nsp32_setup_sg_table(struct scsi_cmnd *SCpnt)
 	return TRUE;
 }
 
-static int nsp32_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
 	nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
 	nsp32_target *target;
@@ -1050,6 +1049,8 @@ static int nsp32_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_
 	return 0;
 }
 
+static DEF_SCSI_QCMD(nsp32_queuecommand)
+
 /* initialize asic */
 static int nsp32hw_init(nsp32_hw_data *data)
 {
diff --git a/drivers/scsi/pas16.h b/drivers/scsi/pas16.h
index 8dc5b1a5f5da..a04281cace2e 100644
--- a/drivers/scsi/pas16.h
+++ b/drivers/scsi/pas16.h
@@ -118,7 +118,7 @@ static int pas16_abort(Scsi_Cmnd *);
 static int pas16_biosparam(struct scsi_device *, struct block_device *,
 			   sector_t, int*);
 static int pas16_detect(struct scsi_host_template *);
-static int pas16_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int pas16_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
 static int pas16_bus_reset(Scsi_Cmnd *);
 
 #ifndef CMD_PER_LUN
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 9326c2c14880..be3f33d31a99 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -184,7 +184,7 @@ static void nsp_scsi_done(struct scsi_cmnd *SCpnt)
 	SCpnt->scsi_done(SCpnt);
 }
 
-static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
+static int nsp_queuecommand_lck(struct scsi_cmnd *SCpnt,
 			    void (*done)(struct scsi_cmnd *))
 {
 #ifdef NSP_DEBUG
@@ -264,6 +264,8 @@ static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(nsp_queuecommand)
+
 /*
  * setup PIO FIFO transfer mode and enable/disable to data out
  */
diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h
index d68c9f267c5e..7fc9a9d0a448 100644
--- a/drivers/scsi/pcmcia/nsp_cs.h
+++ b/drivers/scsi/pcmcia/nsp_cs.h
@@ -299,8 +299,7 @@ static        int        nsp_proc_info  (
 					 off_t   offset,
 					 int     length,
 					 int     inout);
-static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
-			    void (* done)(struct scsi_cmnd *SCpnt));
+static int nsp_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *SCpnt);
 
 /* Error handler */
 /*static int nsp_eh_abort       (struct scsi_cmnd *SCpnt);*/
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index 0ae27cb5cd6f..8552296edaa1 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -547,7 +547,7 @@ SYM53C500_info(struct Scsi_Host *SChost)
 }
 
 static int 
-SYM53C500_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+SYM53C500_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
 	int i;
 	int port_base = SCpnt->device->host->io_port;
@@ -583,6 +583,8 @@ SYM53C500_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(SYM53C500_queue)
+
 static int 
 SYM53C500_host_reset(struct scsi_cmnd *SCpnt)
 {
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index cf89091e4c3d..5e76a624cb08 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -3478,7 +3478,7 @@ static int pmcraid_copy_sglist(
  *	  SCSI_MLQUEUE_DEVICE_BUSY if device is busy
  *	  SCSI_MLQUEUE_HOST_BUSY if host is busy
  */
-static int pmcraid_queuecommand(
+static int pmcraid_queuecommand_lck(
 	struct scsi_cmnd *scsi_cmd,
 	void (*done) (struct scsi_cmnd *)
 )
@@ -3584,6 +3584,8 @@ static int pmcraid_queuecommand(
 	return rc;
 }
 
+static DEF_SCSI_QCMD(pmcraid_queuecommand)
+
 /**
  * pmcraid_open -char node "open" entry, allowed only users with admin access
  */
diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c
index 7bc2d796e403..d164c9639361 100644
--- a/drivers/scsi/ppa.c
+++ b/drivers/scsi/ppa.c
@@ -798,7 +798,7 @@ static int ppa_engine(ppa_struct *dev, struct scsi_cmnd *cmd)
 	return 0;
 }
 
-static int ppa_queuecommand(struct scsi_cmnd *cmd,
+static int ppa_queuecommand_lck(struct scsi_cmnd *cmd,
 		void (*done) (struct scsi_cmnd *))
 {
 	ppa_struct *dev = ppa_dev(cmd->device->host);
@@ -821,6 +821,8 @@ static int ppa_queuecommand(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(ppa_queuecommand)
+
 /*
  * Apparently the disk->capacity attribute is off by 1 sector 
  * for all disk drives.  We add the one here, but it should really
diff --git a/drivers/scsi/ps3rom.c b/drivers/scsi/ps3rom.c
index 92ffbb510498..cd178b9e40cd 100644
--- a/drivers/scsi/ps3rom.c
+++ b/drivers/scsi/ps3rom.c
@@ -211,7 +211,7 @@ static int ps3rom_write_request(struct ps3_storage_device *dev,
 	return 0;
 }
 
-static int ps3rom_queuecommand(struct scsi_cmnd *cmd,
+static int ps3rom_queuecommand_lck(struct scsi_cmnd *cmd,
 			       void (*done)(struct scsi_cmnd *))
 {
 	struct ps3rom_private *priv = shost_priv(cmd->device->host);
@@ -260,6 +260,8 @@ static int ps3rom_queuecommand(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(ps3rom_queuecommand)
+
 static int decode_lv1_status(u64 status, unsigned char *sense_key,
 			     unsigned char *asc, unsigned char *ascq)
 {
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index b8166ecfd0e3..5dec684bf010 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -727,7 +727,7 @@ qla1280_info(struct Scsi_Host *host)
  * context which is a big NO! NO!.
  **************************************************************************/
 static int
-qla1280_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
+qla1280_queuecommand_lck(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
 {
 	struct Scsi_Host *host = cmd->device->host;
 	struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
@@ -756,6 +756,8 @@ qla1280_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
 	return status;
 }
 
+static DEF_SCSI_QCMD(qla1280_queuecommand)
+
 enum action {
 	ABORT_COMMAND,
 	DEVICE_RESET,
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 1830e6e97315..1644eabaafeb 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -179,8 +179,7 @@ static int qla2xxx_slave_alloc(struct scsi_device *);
 static int qla2xxx_scan_finished(struct Scsi_Host *, unsigned long time);
 static void qla2xxx_scan_start(struct Scsi_Host *);
 static void qla2xxx_slave_destroy(struct scsi_device *);
-static int qla2xxx_queuecommand(struct scsi_cmnd *cmd,
-		void (*fn)(struct scsi_cmnd *));
+static int qla2xxx_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmd);
 static int qla2xxx_eh_abort(struct scsi_cmnd *);
 static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
 static int qla2xxx_eh_target_reset(struct scsi_cmnd *);
@@ -535,7 +534,7 @@ qla2x00_get_new_sp(scsi_qla_host_t *vha, fc_port_t *fcport,
 }
 
 static int
-qla2xxx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+qla2xxx_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
 	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
@@ -609,6 +608,8 @@ qc24_fail_command:
 	return 0;
 }
 
+static DEF_SCSI_QCMD(qla2xxx_queuecommand)
+
 
 /*
  * qla2x00_eh_wait_on_command
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index f4cd846abf6d..0d48fb4d1044 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -79,8 +79,7 @@ static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc);
 /*
  * SCSI host template entry points
  */
-static int qla4xxx_queuecommand(struct scsi_cmnd *cmd,
-				void (*done) (struct scsi_cmnd *));
+static int qla4xxx_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmd);
 static int qla4xxx_eh_abort(struct scsi_cmnd *cmd);
 static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd);
 static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd);
@@ -464,7 +463,7 @@ void qla4xxx_srb_compl(struct kref *ref)
  * completion handling).   Unfortunely, it sometimes calls the scheduler
  * in interrupt context which is a big NO! NO!.
  **/
-static int qla4xxx_queuecommand(struct scsi_cmnd *cmd,
+static int qla4xxx_queuecommand_lck(struct scsi_cmnd *cmd,
 				void (*done)(struct scsi_cmnd *))
 {
 	struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
@@ -538,6 +537,8 @@ qc_fail_command:
 	return 0;
 }
 
+static DEF_SCSI_QCMD(qla4xxx_queuecommand)
+
 /**
  * qla4xxx_mem_free - frees memory allocated to adapter
  * @ha: Pointer to host adapter structure.
diff --git a/drivers/scsi/qlogicfas408.c b/drivers/scsi/qlogicfas408.c
index 1ad51552d6b1..c3a9151ca823 100644
--- a/drivers/scsi/qlogicfas408.c
+++ b/drivers/scsi/qlogicfas408.c
@@ -439,7 +439,7 @@ irqreturn_t qlogicfas408_ihandl(int irq, void *dev_id)
  *	Queued command
  */
 
-int qlogicfas408_queuecommand(struct scsi_cmnd *cmd,
+static int qlogicfas408_queuecommand_lck(struct scsi_cmnd *cmd,
 			      void (*done) (struct scsi_cmnd *))
 {
 	struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
@@ -459,6 +459,8 @@ int qlogicfas408_queuecommand(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+DEF_SCSI_QCMD(qlogicfas408_queuecommand)
+
 /* 
  *	Return bios parameters 
  */
diff --git a/drivers/scsi/qlogicfas408.h b/drivers/scsi/qlogicfas408.h
index 260626427a32..2f6c0a166200 100644
--- a/drivers/scsi/qlogicfas408.h
+++ b/drivers/scsi/qlogicfas408.h
@@ -103,8 +103,7 @@ struct qlogicfas408_priv {
 #define get_priv_by_host(x) (struct qlogicfas408_priv *)&((x)->hostdata[0])
 
 irqreturn_t qlogicfas408_ihandl(int irq, void *dev_id);
-int qlogicfas408_queuecommand(struct scsi_cmnd * cmd,
-			      void (*done) (struct scsi_cmnd *));
+int qlogicfas408_queuecommand(struct Scsi_Host *h, struct scsi_cmnd * cmd);
 int qlogicfas408_biosparam(struct scsi_device * disk,
 			   struct block_device *dev,
 			   sector_t capacity, int ip[]);
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index f8c561cf751e..664c9572d0c9 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -1003,7 +1003,7 @@ static int qlogicpti_slave_configure(struct scsi_device *sdev)
  *
  * "This code must fly." -davem
  */
-static int qlogicpti_queuecommand(struct scsi_cmnd *Cmnd, void (*done)(struct scsi_cmnd *))
+static int qlogicpti_queuecommand_lck(struct scsi_cmnd *Cmnd, void (*done)(struct scsi_cmnd *))
 {
 	struct Scsi_Host *host = Cmnd->device->host;
 	struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
@@ -1052,6 +1052,8 @@ toss_command:
 	return 1;
 }
 
+static DEF_SCSI_QCMD(qlogicpti_queuecommand)
+
 static int qlogicpti_return_status(struct Status_Entry *sts, int id)
 {
 	int host_status = DID_ERROR;
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 348fba0a8976..2aeb2e9c4d3b 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -634,12 +634,13 @@ void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
  * Description: a serial number identifies a request for error recovery
  * and debugging purposes.  Protected by the Host_Lock of host.
  */
-static inline void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd *cmd)
+void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 {
 	cmd->serial_number = host->cmd_serial_number++;
 	if (cmd->serial_number == 0) 
 		cmd->serial_number = host->cmd_serial_number++;
 }
+EXPORT_SYMBOL(scsi_cmd_get_serial);
 
 /**
  * scsi_dispatch_command - Dispatch a command to the low-level driver.
@@ -651,7 +652,6 @@ static inline void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd
 int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
 {
 	struct Scsi_Host *host = cmd->device->host;
-	unsigned long flags = 0;
 	unsigned long timeout;
 	int rtn = 0;
 
@@ -737,23 +737,15 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
 		goto out;
 	}
 
-	spin_lock_irqsave(host->host_lock, flags);
-	/*
-	 * AK: unlikely race here: for some reason the timer could
-	 * expire before the serial number is set up below.
-	 *
-	 * TODO: kill serial or move to blk layer
-	 */
-	scsi_cmd_get_serial(host, cmd); 
-
 	if (unlikely(host->shost_state == SHOST_DEL)) {
 		cmd->result = (DID_NO_CONNECT << 16);
 		scsi_done(cmd);
 	} else {
 		trace_scsi_dispatch_cmd_start(cmd);
-		rtn = host->hostt->queuecommand(cmd, scsi_done);
+		cmd->scsi_done = scsi_done;
+		rtn = host->hostt->queuecommand(host, cmd);
 	}
-	spin_unlock_irqrestore(host->host_lock, flags);
+
 	if (rtn) {
 		trace_scsi_dispatch_cmd_error(cmd, rtn);
 		if (rtn != SCSI_MLQUEUE_DEVICE_BUSY &&
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 2c36bae3bd4b..2f1f9b079b10 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -3538,7 +3538,7 @@ static void sdebug_remove_adapter(void)
 }
 
 static
-int scsi_debug_queuecommand(struct scsi_cmnd *SCpnt, done_funct_t done)
+int scsi_debug_queuecommand_lck(struct scsi_cmnd *SCpnt, done_funct_t done)
 {
 	unsigned char *cmd = (unsigned char *) SCpnt->cmnd;
 	int len, k;
@@ -3884,6 +3884,8 @@ write:
 			     (delay_override ? 0 : scsi_debug_delay));
 }
 
+static DEF_SCSI_QCMD(scsi_debug_queuecommand)
+
 static struct scsi_host_template sdebug_driver_template = {
 	.proc_info =		scsi_debug_proc_info,
 	.proc_name =		sdebug_proc_name,
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index f3cf924a2cd9..824b8fc03ce5 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -773,17 +773,15 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
 	struct Scsi_Host *shost = sdev->host;
 	DECLARE_COMPLETION_ONSTACK(done);
 	unsigned long timeleft;
-	unsigned long flags;
 	struct scsi_eh_save ses;
 	int rtn;
 
 	scsi_eh_prep_cmnd(scmd, &ses, cmnd, cmnd_size, sense_bytes);
 	shost->eh_action = &done;
 
-	spin_lock_irqsave(shost->host_lock, flags);
 	scsi_log_send(scmd);
-	shost->hostt->queuecommand(scmd, scsi_eh_done);
-	spin_unlock_irqrestore(shost->host_lock, flags);
+	scmd->scsi_done = scsi_eh_done;
+	shost->hostt->queuecommand(shost, scmd);
 
 	timeleft = wait_for_completion_timeout(&done, timeout);
 
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index 9c73dbda3bbb..606215e54b88 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -572,7 +572,7 @@ stex_slave_destroy(struct scsi_device *sdev)
 }
 
 static int
-stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
+stex_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct st_hba *hba;
 	struct Scsi_Host *host;
@@ -698,6 +698,8 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(stex_queuecommand)
+
 static void stex_scsi_done(struct st_ccb *ccb)
 {
 	struct scsi_cmnd *cmd = ccb->cmd;
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index 713620ed70d9..4f0e5485ffde 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -908,7 +908,7 @@ static int NCR5380_init (struct Scsi_Host *instance, int flags)
  */
 
 /* Only make static if a wrapper function is used */
-static int NCR5380_queue_command(struct scsi_cmnd *cmd,
+static int NCR5380_queue_command_lck(struct scsi_cmnd *cmd,
 				 void (*done)(struct scsi_cmnd *))
 {
     SETUP_HOSTDATA(cmd->device->host);
@@ -1019,6 +1019,8 @@ static int NCR5380_queue_command(struct scsi_cmnd *cmd,
     return 0;
 }
 
+static DEF_SCSI_QCMD(NCR5380_queue_command)
+
 /*
  * Function : NCR5380_main (void) 
  *
diff --git a/drivers/scsi/sun3_scsi.h b/drivers/scsi/sun3_scsi.h
index b29a9d661ca4..bcefd8458e65 100644
--- a/drivers/scsi/sun3_scsi.h
+++ b/drivers/scsi/sun3_scsi.h
@@ -51,8 +51,7 @@ static int sun3scsi_abort(struct scsi_cmnd *);
 static int sun3scsi_detect (struct scsi_host_template *);
 static const char *sun3scsi_info (struct Scsi_Host *);
 static int sun3scsi_bus_reset(struct scsi_cmnd *);
-static int sun3scsi_queue_command(struct scsi_cmnd *,
-				  void (*done)(struct scsi_cmnd *));
+static int sun3scsi_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
 static int sun3scsi_release (struct Scsi_Host *);
 
 #ifndef CMD_PER_LUN
diff --git a/drivers/scsi/sym53c416.c b/drivers/scsi/sym53c416.c
index e5c369bb568f..190107ae120b 100644
--- a/drivers/scsi/sym53c416.c
+++ b/drivers/scsi/sym53c416.c
@@ -734,7 +734,7 @@ const char *sym53c416_info(struct Scsi_Host *SChost)
 	return info;
 }
 
-int sym53c416_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
+static int sym53c416_queuecommand_lck(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 {
 	int base;
 	unsigned long flags = 0;
@@ -761,6 +761,8 @@ int sym53c416_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 	return 0;
 }
 
+DEF_SCSI_QCMD(sym53c416_queuecommand)
+
 static int sym53c416_host_reset(Scsi_Cmnd *SCpnt)
 {
 	int base;
diff --git a/drivers/scsi/sym53c416.h b/drivers/scsi/sym53c416.h
index 77860d0748ff..387de5d80a70 100644
--- a/drivers/scsi/sym53c416.h
+++ b/drivers/scsi/sym53c416.h
@@ -25,7 +25,7 @@
 static int sym53c416_detect(struct scsi_host_template *);
 static const char *sym53c416_info(struct Scsi_Host *);
 static int sym53c416_release(struct Scsi_Host *);
-static int sym53c416_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int sym53c416_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 static int sym53c416_host_reset(Scsi_Cmnd *);
 static int sym53c416_bios_param(struct scsi_device *, struct block_device *,
 		sector_t, int *);
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 8b955b534a36..6b97ded9d45d 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -505,7 +505,7 @@ void sym_log_bus_error(struct Scsi_Host *shost)
  * queuecommand method.  Entered with the host adapter lock held and
  * interrupts disabled.
  */
-static int sym53c8xx_queue_command(struct scsi_cmnd *cmd,
+static int sym53c8xx_queue_command_lck(struct scsi_cmnd *cmd,
 					void (*done)(struct scsi_cmnd *))
 {
 	struct sym_hcb *np = SYM_SOFTC_PTR(cmd);
@@ -536,6 +536,8 @@ static int sym53c8xx_queue_command(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(sym53c8xx_queue_command)
+
 /*
  *  Linux entry point of the interrupt handler.
  */
diff --git a/drivers/scsi/t128.h b/drivers/scsi/t128.h
index 76a069b7ac0b..ada1115079c9 100644
--- a/drivers/scsi/t128.h
+++ b/drivers/scsi/t128.h
@@ -96,8 +96,7 @@ static int t128_abort(struct scsi_cmnd *);
 static int t128_biosparam(struct scsi_device *, struct block_device *,
 			  sector_t, int*);
 static int t128_detect(struct scsi_host_template *);
-static int t128_queue_command(struct scsi_cmnd *,
-			      void (*done)(struct scsi_cmnd *));
+static int t128_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
 static int t128_bus_reset(struct scsi_cmnd *);
 
 #ifndef CMD_PER_LUN
diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c
index 27866b0adfeb..a124a28f2ccb 100644
--- a/drivers/scsi/tmscsim.c
+++ b/drivers/scsi/tmscsim.c
@@ -1883,7 +1883,7 @@ dc390_ScsiRstDetect( struct dc390_acb* pACB )
     return;
 }
 
-static int DC390_queuecommand(struct scsi_cmnd *cmd,
+static int DC390_queuecommand_lck(struct scsi_cmnd *cmd,
 		void (*done)(struct scsi_cmnd *))
 {
 	struct scsi_device *sdev = cmd->device;
@@ -1944,6 +1944,8 @@ static int DC390_queuecommand(struct scsi_cmnd *cmd,
 	return SCSI_MLQUEUE_DEVICE_BUSY;
 }
 
+static DEF_SCSI_QCMD(DC390_queuecommand)
+
 static void dc390_dumpinfo (struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_srb* pSRB)
 {
     struct pci_dev *pdev;
diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c
index 5d9fdeeb2315..edfc5da8be4c 100644
--- a/drivers/scsi/u14-34f.c
+++ b/drivers/scsi/u14-34f.c
@@ -433,7 +433,7 @@
 
 static int u14_34f_detect(struct scsi_host_template *);
 static int u14_34f_release(struct Scsi_Host *);
-static int u14_34f_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
+static int u14_34f_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 static int u14_34f_eh_abort(struct scsi_cmnd *);
 static int u14_34f_eh_host_reset(struct scsi_cmnd *);
 static int u14_34f_bios_param(struct scsi_device *, struct block_device *,
@@ -1248,7 +1248,7 @@ static void scsi_to_dev_dir(unsigned int i, unsigned int j) {
 
 }
 
-static int u14_34f_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) {
+static int u14_34f_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) {
    unsigned int i, j, k;
    struct mscp *cpp;
 
@@ -1329,6 +1329,8 @@ static int u14_34f_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scs
    return 0;
 }
 
+static DEF_SCSI_QCMD(u14_34f_queuecommand)
+
 static int u14_34f_eh_abort(struct scsi_cmnd *SCarg) {
    unsigned int i, j;
 
diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c
index 27aa40f3980e..0571ef9639cb 100644
--- a/drivers/scsi/ultrastor.c
+++ b/drivers/scsi/ultrastor.c
@@ -700,7 +700,7 @@ static inline void build_sg_list(struct mscp *mscp, struct scsi_cmnd *SCpnt)
 	mscp->transfer_data_length = transfer_length;
 }
 
-static int ultrastor_queuecommand(struct scsi_cmnd *SCpnt,
+static int ultrastor_queuecommand_lck(struct scsi_cmnd *SCpnt,
 				void (*done) (struct scsi_cmnd *))
 {
     struct mscp *my_mscp;
@@ -825,6 +825,8 @@ retry:
     return 0;
 }
 
+static DEF_SCSI_QCMD(ultrastor_queuecommand)
+
 /* This code must deal with 2 cases:
 
    1. The command has not been written to the OGM.  In this case, set
diff --git a/drivers/scsi/ultrastor.h b/drivers/scsi/ultrastor.h
index a692905f95f7..165c18b5cf5f 100644
--- a/drivers/scsi/ultrastor.h
+++ b/drivers/scsi/ultrastor.h
@@ -15,8 +15,7 @@
 
 static int ultrastor_detect(struct scsi_host_template *);
 static const char *ultrastor_info(struct Scsi_Host *shpnt);
-static int ultrastor_queuecommand(struct scsi_cmnd *,
-				void (*done)(struct scsi_cmnd *));
+static int ultrastor_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 static int ultrastor_abort(struct scsi_cmnd *);
 static int ultrastor_host_reset(struct scsi_cmnd *);
 static int ultrastor_biosparam(struct scsi_device *, struct block_device *,
diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
index 26894459c37f..a18996d24466 100644
--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -690,7 +690,7 @@ static int pvscsi_queue_ring(struct pvscsi_adapter *adapter,
 	return 0;
 }
 
-static int pvscsi_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int pvscsi_queue_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct Scsi_Host *host = cmd->device->host;
 	struct pvscsi_adapter *adapter = shost_priv(host);
@@ -719,6 +719,8 @@ static int pvscsi_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(pvscsi_queue)
+
 static int pvscsi_abort(struct scsi_cmnd *cmd)
 {
 	struct pvscsi_adapter *adapter = shost_priv(cmd->device->host);
diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index b701bf2cc187..5f697e0bd009 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -371,8 +371,8 @@ calc_sync_msg(unsigned int period, unsigned int offset, unsigned int fast,
 	msg[1] = offset;
 }
 
-int
-wd33c93_queuecommand(struct scsi_cmnd *cmd,
+static int
+wd33c93_queuecommand_lck(struct scsi_cmnd *cmd,
 		void (*done)(struct scsi_cmnd *))
 {
 	struct WD33C93_hostdata *hostdata;
@@ -468,6 +468,8 @@ wd33c93_queuecommand(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+DEF_SCSI_QCMD(wd33c93_queuecommand)
+
 /*
  * This routine attempts to start a scsi command. If the host_card is
  * already connected, we give up immediately. Otherwise, look through
diff --git a/drivers/scsi/wd33c93.h b/drivers/scsi/wd33c93.h
index 1ed5f3bf388e..3b463d7304dc 100644
--- a/drivers/scsi/wd33c93.h
+++ b/drivers/scsi/wd33c93.h
@@ -343,8 +343,7 @@ struct WD33C93_hostdata {
 void wd33c93_init (struct Scsi_Host *instance, const wd33c93_regs regs,
          dma_setup_t setup, dma_stop_t stop, int clock_freq);
 int wd33c93_abort (struct scsi_cmnd *cmd);
-int wd33c93_queuecommand (struct scsi_cmnd *cmd,
-		void (*done)(struct scsi_cmnd *));
+int wd33c93_queuecommand (struct Scsi_Host *h, struct scsi_cmnd *cmd);
 void wd33c93_intr (struct Scsi_Host *instance);
 int wd33c93_proc_info(struct Scsi_Host *, char *, char **, off_t, int, int);
 int wd33c93_host_reset (struct scsi_cmnd *);
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index 333580bf37c5..db451ae0a368 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -1082,7 +1082,7 @@ static irqreturn_t wd7000_intr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int wd7000_queuecommand(struct scsi_cmnd *SCpnt,
+static int wd7000_queuecommand_lck(struct scsi_cmnd *SCpnt,
 		void (*done)(struct scsi_cmnd *))
 {
 	Scb *scb;
@@ -1139,6 +1139,8 @@ static int wd7000_queuecommand(struct scsi_cmnd *SCpnt,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(wd7000_queuecommand)
+
 static int wd7000_diagnostics(Adapter * host, int code)
 {
 	static IcbDiag icb = { ICB_OP_DIAGNOSTICS };
diff --git a/drivers/staging/hv/storvsc_drv.c b/drivers/staging/hv/storvsc_drv.c
index 41d9acf4cd61..6f8d67d0d64f 100644
--- a/drivers/staging/hv/storvsc_drv.c
+++ b/drivers/staging/hv/storvsc_drv.c
@@ -72,8 +72,7 @@ struct storvsc_driver_context {
 
 /* Static decl */
 static int storvsc_probe(struct device *dev);
-static int storvsc_queuecommand(struct scsi_cmnd *scmnd,
-				void (*done)(struct scsi_cmnd *));
+static int storvsc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd);
 static int storvsc_device_alloc(struct scsi_device *);
 static int storvsc_device_configure(struct scsi_device *);
 static int storvsc_host_reset_handler(struct scsi_cmnd *scmnd);
@@ -595,7 +594,7 @@ static unsigned int copy_from_bounce_buffer(struct scatterlist *orig_sgl,
 /*
  * storvsc_queuecommand - Initiate command processing
  */
-static int storvsc_queuecommand(struct scsi_cmnd *scmnd,
+static int storvsc_queuecommand_lck(struct scsi_cmnd *scmnd,
 				void (*done)(struct scsi_cmnd *))
 {
 	int ret;
@@ -783,6 +782,8 @@ retry_request:
 	return ret;
 }
 
+static DEF_SCSI_QCMD(storvsc_queuecommand)
+
 static int storvsc_merge_bvec(struct request_queue *q,
 			      struct bvec_merge_data *bmd, struct bio_vec *bvec)
 {
diff --git a/drivers/staging/keucr/scsiglue.c b/drivers/staging/keucr/scsiglue.c
index a2671404f7ac..da4f42af3838 100644
--- a/drivers/staging/keucr/scsiglue.c
+++ b/drivers/staging/keucr/scsiglue.c
@@ -87,7 +87,7 @@ static int slave_configure(struct scsi_device *sdev)
 
 /* This is always called with scsi_lock(host) held */
 //----- queuecommand() ---------------------
-static int queuecommand(struct scsi_cmnd *srb, void (*done)(struct scsi_cmnd *))
+static int queuecommand_lck(struct scsi_cmnd *srb, void (*done)(struct scsi_cmnd *))
 {
 	struct us_data *us = host_to_us(srb->device->host);
 
@@ -117,6 +117,8 @@ static int queuecommand(struct scsi_cmnd *srb, void (*done)(struct scsi_cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(queuecommand)
+
 /***********************************************************************
  * Error handling functions
  ***********************************************************************/
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index 5a47805d9580..c90c89dc0003 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -364,7 +364,7 @@ static int mts_scsi_host_reset(struct scsi_cmnd *srb)
 }
 
 static int
-mts_scsi_queuecommand(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback);
+mts_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *srb);
 
 static void mts_transfer_cleanup( struct urb *transfer );
 static void mts_do_sg(struct urb * transfer);
@@ -573,7 +573,7 @@ mts_build_transfer_context(struct scsi_cmnd *srb, struct mts_desc* desc)
 
 
 static int
-mts_scsi_queuecommand(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback)
+mts_scsi_queuecommand_lck(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback)
 {
 	struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
 	int err = 0;
@@ -626,6 +626,8 @@ out:
 	return err;
 }
 
+static DEF_SCSI_QCMD(mts_scsi_queuecommand)
+
 static struct scsi_host_template mts_scsi_host_template = {
 	.module			= THIS_MODULE,
 	.name			= "microtekX6",
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index a688b1e686ea..689ee1fb702a 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -285,7 +285,7 @@ static int slave_configure(struct scsi_device *sdev)
 
 /* queue a command */
 /* This is always called with scsi_lock(host) held */
-static int queuecommand(struct scsi_cmnd *srb,
+static int queuecommand_lck(struct scsi_cmnd *srb,
 			void (*done)(struct scsi_cmnd *))
 {
 	struct us_data *us = host_to_us(srb->device->host);
@@ -315,6 +315,8 @@ static int queuecommand(struct scsi_cmnd *srb,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(queuecommand)
+
 /***********************************************************************
  * Error handling functions
  ***********************************************************************/
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index d1268191acbd..339fac3949df 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -430,7 +430,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 	return 0;
 }
 
-static int uas_queuecommand(struct scsi_cmnd *cmnd,
+static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 					void (*done)(struct scsi_cmnd *))
 {
 	struct scsi_device *sdev = cmnd->device;
@@ -488,6 +488,8 @@ static int uas_queuecommand(struct scsi_cmnd *cmnd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(uas_queuecommand)
+
 static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
 {
 	struct scsi_device *sdev = cmnd->device;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 15b77b8dc7e1..d947b1231662 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -986,7 +986,7 @@ extern void ata_host_init(struct ata_host *, struct device *,
 			  unsigned long, struct ata_port_operations *);
 extern int ata_scsi_detect(struct scsi_host_template *sht);
 extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
-extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
+extern int ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd);
 extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev,
 			    int cmd, void __user *arg);
 extern void ata_sas_port_destroy(struct ata_port *);
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index f986ab7ffe6f..5c4c1678f7be 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -1006,8 +1006,7 @@ void fc_fcp_destroy(struct fc_lport *);
 /*
  * SCSI INTERACTION LAYER
  *****************************/
-int fc_queuecommand(struct scsi_cmnd *,
-		    void (*done)(struct scsi_cmnd *));
+int fc_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 int fc_eh_abort(struct scsi_cmnd *);
 int fc_eh_device_reset(struct scsi_cmnd *);
 int fc_eh_host_reset(struct scsi_cmnd *);
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index ae5196aae1a5..b81d969ddc67 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -341,8 +341,7 @@ extern int iscsi_eh_abort(struct scsi_cmnd *sc);
 extern int iscsi_eh_recover_target(struct scsi_cmnd *sc);
 extern int iscsi_eh_session_reset(struct scsi_cmnd *sc);
 extern int iscsi_eh_device_reset(struct scsi_cmnd *sc);
-extern int iscsi_queuecommand(struct scsi_cmnd *sc,
-			      void (*done)(struct scsi_cmnd *));
+extern int iscsi_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *sc);
 
 /*
  * iSCSI host helpers.
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index 3dec1949f69c..90ce527ecf3d 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -621,8 +621,7 @@ int sas_set_phy_speed(struct sas_phy *phy,
 int sas_phy_enable(struct sas_phy *phy, int enabled);
 int sas_phy_reset(struct sas_phy *phy, int hard_reset);
 int sas_queue_up(struct sas_task *task);
-extern int sas_queuecommand(struct scsi_cmnd *,
-		     void (*scsi_done)(struct scsi_cmnd *));
+extern int sas_queuecommand(struct Scsi_Host * ,struct scsi_cmnd *);
 extern int sas_target_alloc(struct scsi_target *);
 extern int sas_slave_alloc(struct scsi_device *);
 extern int sas_slave_configure(struct scsi_device *);
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index d0a6a845f204..e7e385842a38 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -127,8 +127,7 @@ struct scsi_host_template {
 	 *
 	 * STATUS: REQUIRED
 	 */
-	int (* queuecommand)(struct scsi_cmnd *,
-			     void (*done)(struct scsi_cmnd *));
+	int (* queuecommand)(struct Scsi_Host *, struct scsi_cmnd *);
 
 	/*
 	 * The transfer functions are used to queue a scsi command to
@@ -504,6 +503,25 @@ struct scsi_host_template {
 	u64 vendor_id;
 };
 
+/*
+ * Temporary #define for host lock push down. Can be removed when all
+ * drivers have been updated to take advantage of unlocked
+ * queuecommand.
+ *
+ */
+#define DEF_SCSI_QCMD(func_name) \
+	int func_name(struct Scsi_Host *shost, struct scsi_cmnd *cmd)	\
+	{								\
+		unsigned long irq_flags;				\
+		int rc;							\
+		spin_lock_irqsave(shost->host_lock, irq_flags);		\
+		scsi_cmd_get_serial(shost, cmd);			\
+		rc = func_name##_lck (cmd, cmd->scsi_done);			\
+		spin_unlock_irqrestore(shost->host_lock, irq_flags);	\
+		return rc;						\
+	}
+
+
 /*
  * shost state: If you alter this, you also need to alter scsi_sysfs.c
  * (for the ascii descriptions) and the state model enforcer:
@@ -752,6 +770,7 @@ extern struct Scsi_Host *scsi_host_get(struct Scsi_Host *);
 extern void scsi_host_put(struct Scsi_Host *t);
 extern struct Scsi_Host *scsi_host_lookup(unsigned short);
 extern const char *scsi_host_state_name(enum scsi_host_state);
+extern void scsi_cmd_get_serial(struct Scsi_Host *, struct scsi_cmnd *);
 
 extern u64 scsi_calculate_bounce_limit(struct Scsi_Host *);
 

From 3d091a6f703906c5680855ff29bd94d051c8c6d8 Mon Sep 17 00:00:00 2001
From: Andiry Xu <andiry.xu@amd.com>
Date: Mon, 8 Nov 2010 17:58:35 +0800
Subject: [PATCH 0660/1066] USB: EHCI: AMD periodic frame list table quirk

On AMD SB700/SB800/Hudson-2/3 platforms, USB EHCI controller may read/write
to memory space not allocated to USB controller if there is longer than
normal latency on DMA read encountered. In this condition the exposure will
be encountered only if the driver has following format of Periodic Frame
List link pointer structure:

For any idle periodic schedule, the Frame List link pointers that have the
T-bit set to 1 intending to terminate the use of frame list link pointer
as a physical memory pointer.

Idle periodic schedule Frame List Link pointer shoule be in the following
format to avoid the issue:

Frame list link pointer should be always contains a valid pointer to a
inactive QHead with T-bit set to 0.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/host/ehci-mem.c   | 26 ++++++++++++++++++++++++--
 drivers/usb/host/ehci-pci.c   | 13 +++++++++++++
 drivers/usb/host/ehci-sched.c | 21 ++++++++++++++++++---
 drivers/usb/host/ehci.h       |  2 ++
 4 files changed, 57 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index d36e4e75e08d..12f70c302b0b 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -141,6 +141,10 @@ static void ehci_mem_cleanup (struct ehci_hcd *ehci)
 		qh_put (ehci->async);
 	ehci->async = NULL;
 
+	if (ehci->dummy)
+		qh_put(ehci->dummy);
+	ehci->dummy = NULL;
+
 	/* DMA consistent memory and pools */
 	if (ehci->qtd_pool)
 		dma_pool_destroy (ehci->qtd_pool);
@@ -227,8 +231,26 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags)
 	if (ehci->periodic == NULL) {
 		goto fail;
 	}
-	for (i = 0; i < ehci->periodic_size; i++)
-		ehci->periodic [i] = EHCI_LIST_END(ehci);
+
+	if (ehci->use_dummy_qh) {
+		struct ehci_qh_hw	*hw;
+		ehci->dummy = ehci_qh_alloc(ehci, flags);
+		if (!ehci->dummy)
+			goto fail;
+
+		hw = ehci->dummy->hw;
+		hw->hw_next = EHCI_LIST_END(ehci);
+		hw->hw_qtd_next = EHCI_LIST_END(ehci);
+		hw->hw_alt_next = EHCI_LIST_END(ehci);
+		hw->hw_token &= ~QTD_STS_ACTIVE;
+		ehci->dummy->hw = hw;
+
+		for (i = 0; i < ehci->periodic_size; i++)
+			ehci->periodic[i] = ehci->dummy->qh_dma;
+	} else {
+		for (i = 0; i < ehci->periodic_size; i++)
+			ehci->periodic[i] = EHCI_LIST_END(ehci);
+	}
 
 	/* software shadow of hardware table */
 	ehci->pshadow = kcalloc(ehci->periodic_size, sizeof(void *), flags);
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index a1e8d273103f..01bb72b71832 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -103,6 +103,19 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 	if (retval)
 		return retval;
 
+	if ((pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x7808) ||
+	    (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->device == 0x4396)) {
+		/* EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
+		 * read/write memory space which does not belong to it when
+		 * there is NULL pointer with T-bit set to 1 in the frame list
+		 * table. To avoid the issue, the frame list link pointer
+		 * should always contain a valid pointer to a inactive qh.
+		 */
+		ehci->use_dummy_qh = 1;
+		ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI "
+				"dummy qh workaround\n");
+	}
+
 	/* data structure init */
 	retval = ehci_init(hcd);
 	if (retval)
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index a92526d6e5ae..d9f78eb26572 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -98,7 +98,14 @@ static void periodic_unlink (struct ehci_hcd *ehci, unsigned frame, void *ptr)
 	 */
 	*prev_p = *periodic_next_shadow(ehci, &here,
 			Q_NEXT_TYPE(ehci, *hw_p));
-	*hw_p = *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p));
+
+	if (!ehci->use_dummy_qh ||
+	    *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p))
+			!= EHCI_LIST_END(ehci))
+		*hw_p = *shadow_next_periodic(ehci, &here,
+				Q_NEXT_TYPE(ehci, *hw_p));
+	else
+		*hw_p = ehci->dummy->qh_dma;
 }
 
 /* how many of the uframe's 125 usecs are allocated? */
@@ -2335,7 +2342,11 @@ restart:
 				 * pointer for much longer, if at all.
 				 */
 				*q_p = q.itd->itd_next;
-				*hw_p = q.itd->hw_next;
+				if (!ehci->use_dummy_qh ||
+				    q.itd->hw_next != EHCI_LIST_END(ehci))
+					*hw_p = q.itd->hw_next;
+				else
+					*hw_p = ehci->dummy->qh_dma;
 				type = Q_NEXT_TYPE(ehci, q.itd->hw_next);
 				wmb();
 				modified = itd_complete (ehci, q.itd);
@@ -2368,7 +2379,11 @@ restart:
 				 * URB completion.
 				 */
 				*q_p = q.sitd->sitd_next;
-				*hw_p = q.sitd->hw_next;
+				if (!ehci->use_dummy_qh ||
+				    q.sitd->hw_next != EHCI_LIST_END(ehci))
+					*hw_p = q.sitd->hw_next;
+				else
+					*hw_p = ehci->dummy->qh_dma;
 				type = Q_NEXT_TYPE(ehci, q.sitd->hw_next);
 				wmb();
 				modified = sitd_complete (ehci, q.sitd);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bde823f704e9..ba8eab366b82 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -73,6 +73,7 @@ struct ehci_hcd {			/* one per controller */
 
 	/* async schedule support */
 	struct ehci_qh		*async;
+	struct ehci_qh		*dummy;		/* For AMD quirk use */
 	struct ehci_qh		*reclaim;
 	unsigned		scanning : 1;
 
@@ -131,6 +132,7 @@ struct ehci_hcd {			/* one per controller */
 	unsigned		need_io_watchdog:1;
 	unsigned		broken_periodic:1;
 	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
+	unsigned		use_dummy_qh:1;	/* AMD Frame List table quirk*/
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)

From f52022b53bac3228620e490abbe2ccb1e87ab060 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Tue, 9 Nov 2010 09:16:39 +0800
Subject: [PATCH 0661/1066] USB: isp1362-hcd - fix section mismatch warning

Fix section mismatch warning by using "__devinit" annotation for isp1362_probe.

WARNING: drivers/usb/host/isp1362-hcd.o(.data+0x0): Section mismatch in reference from the variable isp1362_driver to the function .init.text:isp1362_probe()
The variable isp1362_driver references
the function __init isp1362_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/host/isp1362-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 8196fa11fec4..97cce59ff767 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2684,7 +2684,7 @@ static int __devexit isp1362_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int __init isp1362_probe(struct platform_device *pdev)
+static int __devinit isp1362_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
 	struct isp1362_hcd *isp1362_hcd;

From b48809518631880207796b4aab0fc39c2f036754 Mon Sep 17 00:00:00 2001
From: Josh Wu <josh.wu@atmel.com>
Date: Tue, 16 Nov 2010 11:51:32 +0100
Subject: [PATCH 0662/1066] USB: gadget: AT91: fix typo in atmel_usba_udc
 driver

compile fix for bug introduced by 969affff547027)

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/gadget/atmel_usba_udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index b5e20e873cba..717ff653fa23 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -2017,7 +2017,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 			}
 		} else {
 			/* gpio_request fail so use -EINVAL for gpio_is_valid */
-			ubc->vbus_pin = -EINVAL;
+			udc->vbus_pin = -EINVAL;
 		}
 	}
 

From 02e2c51ba3e80acde600721ea784c3ef84da5ea1 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Tue, 16 Nov 2010 10:57:37 -0500
Subject: [PATCH 0663/1066] USB: EHCI: fix obscure race in
 ehci_endpoint_disable

This patch (as1435) fixes an obscure and unlikely race in ehci-hcd.
When an async URB is unlinked, the corresponding QH is removed from
the async list.  If the QH's endpoint is then disabled while the URB
is being given back, ehci_endpoint_disable() won't find the QH on the
async list, causing it to believe that the QH has been lost.  This
will lead to a memory leak at best and quite possibly to an oops.

The solution is to trust usbcore not to lose track of endpoints.  If
the QH isn't on the async list then it doesn't need to be taken off
the list, but the driver should still wait for the QH to become IDLE
before disabling it.

In theory this fixes Bugzilla #20182.  In fact the race is so rare
that it's not possible to tell whether the bug is still present.
However, adding delays and making other changes to force the race
seems to show that the patch works.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
CC: David Brownell <david-b@pacbell.net>
CC: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/host/ehci-hcd.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 502a7e6fef42..e9062806d4a2 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1063,10 +1063,11 @@ rescan:
 				tmp && tmp != qh;
 				tmp = tmp->qh_next.qh)
 			continue;
-		/* periodic qh self-unlinks on empty */
-		if (!tmp)
-			goto nogood;
-		unlink_async (ehci, qh);
+		/* periodic qh self-unlinks on empty, and a COMPLETING qh
+		 * may already be unlinked.
+		 */
+		if (tmp)
+			unlink_async(ehci, qh);
 		/* FALL THROUGH */
 	case QH_STATE_UNLINK:		/* wait for hw to finish? */
 	case QH_STATE_UNLINK_WAIT:
@@ -1083,7 +1084,6 @@ idle_timeout:
 		}
 		/* else FALL THROUGH */
 	default:
-nogood:
 		/* caller was supposed to have unlinked any requests;
 		 * that's not our job.  just leak this memory.
 		 */

From 1c6969ec8e6328e8d288fc585310e9e52fc9db04 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Tue, 16 Nov 2010 14:55:33 -0800
Subject: [PATCH 0664/1066] xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[]
 after restore

To bind all event channels to CPU#0, it is not sufficient to set all
of its cpu_evtchn_mask[] bits; all other CPUs also need to get their
bits cleared. Otherwise, evtchn_do_upcall() will start handling
interrupts on CPUs they're not intended to run on, which can be
particularly bad for per-CPU ones.

[ linux-2.6.18-xen.hg 7de7453dee36 ]

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/events.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 321a0c8346e5..d770b8c8885b 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -286,9 +286,9 @@ static void bind_evtchn_to_cpu(unsigned int chn, unsigned int cpu)
 
 static void init_evtchn_cpu_bindings(void)
 {
+	int i;
 #ifdef CONFIG_SMP
 	struct irq_desc *desc;
-	int i;
 
 	/* By default all event channels notify CPU#0. */
 	for_each_irq_desc(i, desc) {
@@ -296,7 +296,10 @@ static void init_evtchn_cpu_bindings(void)
 	}
 #endif
 
-	memset(cpu_evtchn_mask(0), ~0, sizeof(struct cpu_evtchn_s));
+	for_each_possible_cpu(i)
+		memset(cpu_evtchn_mask(i),
+		       (i == 0) ? ~0 : 0, sizeof(struct cpu_evtchn_s));
+
 }
 
 static inline void clear_evtchn(int port)

From e04195644eea7c6c14007922257704ec67156cd1 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Tue, 16 Nov 2010 14:56:47 -0800
Subject: [PATCH 0665/1066] xen/events: use locked set|clear_bit() for
 cpu_evtchn_mask

The per-cpu event channel masks can be updated unlocked from multiple
CPUs, so use the locked variant.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/events.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index d770b8c8885b..d6d4f76ed500 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -278,8 +278,8 @@ static void bind_evtchn_to_cpu(unsigned int chn, unsigned int cpu)
 	cpumask_copy(irq_to_desc(irq)->affinity, cpumask_of(cpu));
 #endif
 
-	__clear_bit(chn, cpu_evtchn_mask(cpu_from_irq(irq)));
-	__set_bit(chn, cpu_evtchn_mask(cpu));
+	clear_bit(chn, cpu_evtchn_mask(cpu_from_irq(irq)));
+	set_bit(chn, cpu_evtchn_mask(cpu));
 
 	irq_info[irq].cpu = cpu;
 }

From 902bca00dc6e3b3ff5fbb1e32e5dbb45d5f30579 Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Sat, 6 Nov 2010 12:36:13 +0100
Subject: [PATCH 0666/1066] firewire: net: count stats.tx_packets and
 stats.tx_bytes

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/net.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index 18fdd9703b48..e2e968e732bc 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -906,6 +906,7 @@ static int fwnet_send_packet(struct fwnet_packet_task *ptask);
 static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 {
 	struct fwnet_device *dev = ptask->dev;
+	struct sk_buff *skb = ptask->skb;
 	unsigned long flags;
 	bool free;
 
@@ -916,8 +917,11 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 	/* Check whether we or the networking TX soft-IRQ is last user. */
 	free = (ptask->outstanding_pkts == 0 && !list_empty(&ptask->pt_link));
 
-	if (ptask->outstanding_pkts == 0)
+	if (ptask->outstanding_pkts == 0) {
 		list_del(&ptask->pt_link);
+		dev->netdev->stats.tx_packets++;
+		dev->netdev->stats.tx_bytes += skb->len;
+	}
 
 	spin_unlock_irqrestore(&dev->lock, flags);
 
@@ -926,7 +930,6 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 		u16 fg_off;
 		u16 datagram_label;
 		u16 lf;
-		struct sk_buff *skb;
 
 		/* Update the ptask to point to the next fragment and send it */
 		lf = fwnet_get_hdr_lf(&ptask->hdr);
@@ -953,7 +956,7 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 			datagram_label = fwnet_get_hdr_dgl(&ptask->hdr);
 			break;
 		}
-		skb = ptask->skb;
+
 		skb_pull(skb, ptask->max_payload);
 		if (ptask->outstanding_pkts > 1) {
 			fwnet_make_sf_hdr(&ptask->hdr, RFC2374_HDR_INTFRAG,

From 7ee11fa8d0a84b05cefe12b0bebc05ab0ea89cd6 Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Sat, 6 Nov 2010 16:57:28 +0100
Subject: [PATCH 0667/1066] firewire: net: fix memory leaks

a) fwnet_transmit_packet_done used to poison ptask->pt_link by list_del.
If fwnet_send_packet checked later whether it was responsible to clean
up (in the border case that the TX soft IRQ was outpaced by the AT-req
tasklet on another CPU), it missed this because ptask->pt_link was no
longer shown as empty.

b) If fwnet_write_complete got an rcode other than RCODE_COMPLETE, we
missed to free the skb and ptask entirely.

Also, count stats.tx_dropped and stats.tx_errors when rcode != 0.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/net.c | 35 +++++++++++++++++++++++++++++++----
 1 file changed, 31 insertions(+), 4 deletions(-)

diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index e2e968e732bc..3a27cee5bf26 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -916,9 +916,10 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 
 	/* Check whether we or the networking TX soft-IRQ is last user. */
 	free = (ptask->outstanding_pkts == 0 && !list_empty(&ptask->pt_link));
+	if (free)
+		list_del(&ptask->pt_link);
 
 	if (ptask->outstanding_pkts == 0) {
-		list_del(&ptask->pt_link);
 		dev->netdev->stats.tx_packets++;
 		dev->netdev->stats.tx_bytes += skb->len;
 	}
@@ -973,6 +974,31 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 		fwnet_free_ptask(ptask);
 }
 
+static void fwnet_transmit_packet_failed(struct fwnet_packet_task *ptask)
+{
+	struct fwnet_device *dev = ptask->dev;
+	unsigned long flags;
+	bool free;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* One fragment failed; don't try to send remaining fragments. */
+	ptask->outstanding_pkts = 0;
+
+	/* Check whether we or the networking TX soft-IRQ is last user. */
+	free = !list_empty(&ptask->pt_link);
+	if (free)
+		list_del(&ptask->pt_link);
+
+	dev->netdev->stats.tx_dropped++;
+	dev->netdev->stats.tx_errors++;
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	if (free)
+		fwnet_free_ptask(ptask);
+}
+
 static void fwnet_write_complete(struct fw_card *card, int rcode,
 				 void *payload, size_t length, void *data)
 {
@@ -980,11 +1006,12 @@ static void fwnet_write_complete(struct fw_card *card, int rcode,
 
 	ptask = data;
 
-	if (rcode == RCODE_COMPLETE)
+	if (rcode == RCODE_COMPLETE) {
 		fwnet_transmit_packet_done(ptask);
-	else
+	} else {
 		fw_error("fwnet_write_complete: failed: %x\n", rcode);
-		/* ??? error recovery */
+		fwnet_transmit_packet_failed(ptask);
+	}
 }
 
 static int fwnet_send_packet(struct fwnet_packet_task *ptask)

From 48553011cea504796e513350740781ac6745f556 Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Sat, 6 Nov 2010 23:18:23 +0100
Subject: [PATCH 0668/1066] firewire: net: replace lists by counters

The current transmit code does not at all make use of
  - fwnet_device.packet_list
and only very limited use of
  - fwnet_device.broadcasted_list,
  - fwnet_device.queued_packets.
Their current function is to track whether the TX soft-IRQ finished
dealing with an skb when the AT-req tasklet takes over, and to discard
pending tx datagrams (if there are any) when the local node is removed.

The latter does actually contain a race condition bug with TX soft-IRQ
and AT-req tasklet.

Instead of these lists and the corresponding link in fwnet_packet_task,
  - a flag in fwnet_packet_task to track whether fwnet_tx is done,
  - a counter of queued datagrams in fwnet_device
do the job as well.

The above mentioned theoretic race condition is resolved by letting
fwnet_remove sleep until all datagrams were flushed.  It may sleep
almost arbitrarily long since fwnet_remove is executed in the context of
a multithreaded (concurrency managed) workqueue.

The type of max_payload is changed to u16 here to avoid waste in struct
fwnet_packet_task.  This value cannot exceed 4096 per IEEE 1394:2008
table 16-18 (or 32678 per specification of packet headers, if there is
ever going to be something else than beta mode).

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/net.c | 73 +++++++++++++++---------------------------
 1 file changed, 26 insertions(+), 47 deletions(-)

diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index 3a27cee5bf26..d2d488b9cd96 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/bug.h>
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/firewire.h>
 #include <linux/firewire-constants.h>
@@ -169,15 +170,8 @@ struct fwnet_device {
 	struct fw_address_handler handler;
 	u64 local_fifo;
 
-	/* List of packets to be sent */
-	struct list_head packet_list;
-	/*
-	 * List of packets that were broadcasted.  When we get an ISO interrupt
-	 * one of them has been sent
-	 */
-	struct list_head broadcasted_list;
-	/* List of packets that have been sent but not yet acked */
-	struct list_head sent_list;
+	/* Number of tx datagrams that have been queued but not yet acked */
+	int queued_datagrams;
 
 	struct list_head peer_list;
 	struct fw_card *card;
@@ -195,7 +189,7 @@ struct fwnet_peer {
 	unsigned pdg_size;        /* pd_list size */
 
 	u16 datagram_label;       /* outgoing datagram label */
-	unsigned max_payload;     /* includes RFC2374_FRAG_HDR_SIZE overhead */
+	u16 max_payload;          /* includes RFC2374_FRAG_HDR_SIZE overhead */
 	int node_id;
 	int generation;
 	unsigned speed;
@@ -203,22 +197,18 @@ struct fwnet_peer {
 
 /* This is our task struct. It's used for the packet complete callback.  */
 struct fwnet_packet_task {
-	/*
-	 * ptask can actually be on dev->packet_list, dev->broadcasted_list,
-	 * or dev->sent_list depending on its current state.
-	 */
-	struct list_head pt_link;
 	struct fw_transaction transaction;
 	struct rfc2734_header hdr;
 	struct sk_buff *skb;
 	struct fwnet_device *dev;
 
 	int outstanding_pkts;
-	unsigned max_payload;
 	u64 fifo_addr;
 	u16 dest_node;
+	u16 max_payload;
 	u8 generation;
 	u8 speed;
+	u8 enqueued;
 };
 
 /*
@@ -915,9 +905,9 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 	ptask->outstanding_pkts--;
 
 	/* Check whether we or the networking TX soft-IRQ is last user. */
-	free = (ptask->outstanding_pkts == 0 && !list_empty(&ptask->pt_link));
+	free = (ptask->outstanding_pkts == 0 && ptask->enqueued);
 	if (free)
-		list_del(&ptask->pt_link);
+		dev->queued_datagrams--;
 
 	if (ptask->outstanding_pkts == 0) {
 		dev->netdev->stats.tx_packets++;
@@ -986,9 +976,9 @@ static void fwnet_transmit_packet_failed(struct fwnet_packet_task *ptask)
 	ptask->outstanding_pkts = 0;
 
 	/* Check whether we or the networking TX soft-IRQ is last user. */
-	free = !list_empty(&ptask->pt_link);
+	free = ptask->enqueued;
 	if (free)
-		list_del(&ptask->pt_link);
+		dev->queued_datagrams--;
 
 	dev->netdev->stats.tx_dropped++;
 	dev->netdev->stats.tx_errors++;
@@ -1069,9 +1059,11 @@ static int fwnet_send_packet(struct fwnet_packet_task *ptask)
 		spin_lock_irqsave(&dev->lock, flags);
 
 		/* If the AT tasklet already ran, we may be last user. */
-		free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+		free = (ptask->outstanding_pkts == 0 && !ptask->enqueued);
 		if (!free)
-			list_add_tail(&ptask->pt_link, &dev->broadcasted_list);
+			ptask->enqueued = true;
+		else
+			dev->queued_datagrams--;
 
 		spin_unlock_irqrestore(&dev->lock, flags);
 
@@ -1086,9 +1078,11 @@ static int fwnet_send_packet(struct fwnet_packet_task *ptask)
 	spin_lock_irqsave(&dev->lock, flags);
 
 	/* If the AT tasklet already ran, we may be last user. */
-	free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+	free = (ptask->outstanding_pkts == 0 && !ptask->enqueued);
 	if (!free)
-		list_add_tail(&ptask->pt_link, &dev->sent_list);
+		ptask->enqueued = true;
+	else
+		dev->queued_datagrams--;
 
 	spin_unlock_irqrestore(&dev->lock, flags);
 
@@ -1350,10 +1344,12 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
 		max_payload += RFC2374_FRAG_HDR_SIZE;
 	}
 
+	dev->queued_datagrams++;
+
 	spin_unlock_irqrestore(&dev->lock, flags);
 
 	ptask->max_payload = max_payload;
-	INIT_LIST_HEAD(&ptask->pt_link);
+	ptask->enqueued    = 0;
 
 	fwnet_send_packet(ptask);
 
@@ -1487,14 +1483,9 @@ static int fwnet_probe(struct device *_dev)
 	dev->broadcast_rcv_context = NULL;
 	dev->broadcast_xmt_max_payload = 0;
 	dev->broadcast_xmt_datagramlabel = 0;
-
 	dev->local_fifo = FWNET_NO_FIFO_ADDR;
-
-	INIT_LIST_HEAD(&dev->packet_list);
-	INIT_LIST_HEAD(&dev->broadcasted_list);
-	INIT_LIST_HEAD(&dev->sent_list);
+	dev->queued_datagrams = 0;
 	INIT_LIST_HEAD(&dev->peer_list);
-
 	dev->card = card;
 	dev->netdev = net;
 
@@ -1552,7 +1543,7 @@ static int fwnet_remove(struct device *_dev)
 	struct fwnet_peer *peer = dev_get_drvdata(_dev);
 	struct fwnet_device *dev = peer->dev;
 	struct net_device *net;
-	struct fwnet_packet_task *ptask, *pt_next;
+	int i;
 
 	mutex_lock(&fwnet_device_mutex);
 
@@ -1570,21 +1561,9 @@ static int fwnet_remove(struct device *_dev)
 					      dev->card);
 			fw_iso_context_destroy(dev->broadcast_rcv_context);
 		}
-		list_for_each_entry_safe(ptask, pt_next,
-					 &dev->packet_list, pt_link) {
-			dev_kfree_skb_any(ptask->skb);
-			kmem_cache_free(fwnet_packet_task_cache, ptask);
-		}
-		list_for_each_entry_safe(ptask, pt_next,
-					 &dev->broadcasted_list, pt_link) {
-			dev_kfree_skb_any(ptask->skb);
-			kmem_cache_free(fwnet_packet_task_cache, ptask);
-		}
-		list_for_each_entry_safe(ptask, pt_next,
-					 &dev->sent_list, pt_link) {
-			dev_kfree_skb_any(ptask->skb);
-			kmem_cache_free(fwnet_packet_task_cache, ptask);
-		}
+		for (i = 0; dev->queued_datagrams && i < 5; i++)
+			ssleep(1);
+		WARN_ON(dev->queued_datagrams);
 		list_del(&dev->dev_link);
 
 		free_netdev(net);

From b2268830f5cf29d94b3e4a2af0b795a8f28776fe Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Sun, 14 Nov 2010 14:35:40 +0100
Subject: [PATCH 0669/1066] firewire: net: throttle TX queue before running out
 of tlabels

This prevents firewire-net from submitting write requests in fast
succession until failure due to all 64 transaction labels were used up
for unfinished split transactions.  The netif_stop/wake_queue API is
used for this purpose.

Without this stop/wake mechanism, datagrams were simply lost whenever
the tlabel pool was exhausted.  Plus, tlabel exhaustion by firewire-net
also prevented other unrelated outbound transactions to be initiated.

The chosen queue depth was checked by me to hit the maximum possible
throughput with an OS X peer whose receive DMA is good enough to never
reject requests due to busy inbound request FIFO.  Current Linux peers
show a mixed picture of -5%...+15% change in bandwidth; their current
bottleneck are RCODE_BUSY situations (fewer or more, depending on TX
queue depth) due to too small AR buffer in firewire-ohci.

Maxim Levitsky tested this change with similar watermarks with a Linux
peer and some pending firewire-ohci improvements that address the
RCODE_BUSY problem and confirmed that these TX queue limits are good.

Note:  This removes some netif_wake_queue from reception code paths.
They were apparently copy&paste artefacts from a nonsensical
netif_wake_queue use in the older eth1394 driver.  This belongs only
into the transmit path.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 drivers/firewire/net.c | 59 +++++++++++++++++++++++++-----------------
 1 file changed, 35 insertions(+), 24 deletions(-)

diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index d2d488b9cd96..1a467a91fb0b 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -27,8 +27,14 @@
 #include <asm/unaligned.h>
 #include <net/arp.h>
 
-#define FWNET_MAX_FRAGMENTS	25	/* arbitrary limit */
-#define FWNET_ISO_PAGE_COUNT	(PAGE_SIZE < 16 * 1024 ? 4 : 2)
+/* rx limits */
+#define FWNET_MAX_FRAGMENTS		30 /* arbitrary, > TX queue depth */
+#define FWNET_ISO_PAGE_COUNT		(PAGE_SIZE < 16*1024 ? 4 : 2)
+
+/* tx limits */
+#define FWNET_MAX_QUEUED_DATAGRAMS	20 /* < 64 = number of tlabels */
+#define FWNET_MIN_QUEUED_DATAGRAMS	10 /* should keep AT DMA busy enough */
+#define FWNET_TX_QUEUE_LEN		FWNET_MAX_QUEUED_DATAGRAMS /* ? */
 
 #define IEEE1394_BROADCAST_CHANNEL	31
 #define IEEE1394_ALL_NODES		(0xffc0 | 0x003f)
@@ -640,8 +646,6 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 		net->stats.rx_packets++;
 		net->stats.rx_bytes += skb->len;
 	}
-	if (netif_queue_stopped(net))
-		netif_wake_queue(net);
 
 	return 0;
 
@@ -650,8 +654,6 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 	net->stats.rx_dropped++;
 
 	dev_kfree_skb_any(skb);
-	if (netif_queue_stopped(net))
-		netif_wake_queue(net);
 
 	return -ENOENT;
 }
@@ -783,15 +785,10 @@ static int fwnet_incoming_packet(struct fwnet_device *dev, __be32 *buf, int len,
 	 * Datagram is not complete, we're done for the
 	 * moment.
 	 */
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	return 0;
+	retval = 0;
  fail:
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	if (netif_queue_stopped(net))
-		netif_wake_queue(net);
-
 	return retval;
 }
 
@@ -891,6 +888,13 @@ static void fwnet_free_ptask(struct fwnet_packet_task *ptask)
 	kmem_cache_free(fwnet_packet_task_cache, ptask);
 }
 
+/* Caller must hold dev->lock. */
+static void dec_queued_datagrams(struct fwnet_device *dev)
+{
+	if (--dev->queued_datagrams == FWNET_MIN_QUEUED_DATAGRAMS)
+		netif_wake_queue(dev->netdev);
+}
+
 static int fwnet_send_packet(struct fwnet_packet_task *ptask);
 
 static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
@@ -907,7 +911,7 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 	/* Check whether we or the networking TX soft-IRQ is last user. */
 	free = (ptask->outstanding_pkts == 0 && ptask->enqueued);
 	if (free)
-		dev->queued_datagrams--;
+		dec_queued_datagrams(dev);
 
 	if (ptask->outstanding_pkts == 0) {
 		dev->netdev->stats.tx_packets++;
@@ -978,7 +982,7 @@ static void fwnet_transmit_packet_failed(struct fwnet_packet_task *ptask)
 	/* Check whether we or the networking TX soft-IRQ is last user. */
 	free = ptask->enqueued;
 	if (free)
-		dev->queued_datagrams--;
+		dec_queued_datagrams(dev);
 
 	dev->netdev->stats.tx_dropped++;
 	dev->netdev->stats.tx_errors++;
@@ -1063,7 +1067,7 @@ static int fwnet_send_packet(struct fwnet_packet_task *ptask)
 		if (!free)
 			ptask->enqueued = true;
 		else
-			dev->queued_datagrams--;
+			dec_queued_datagrams(dev);
 
 		spin_unlock_irqrestore(&dev->lock, flags);
 
@@ -1082,7 +1086,7 @@ static int fwnet_send_packet(struct fwnet_packet_task *ptask)
 	if (!free)
 		ptask->enqueued = true;
 	else
-		dev->queued_datagrams--;
+		dec_queued_datagrams(dev);
 
 	spin_unlock_irqrestore(&dev->lock, flags);
 
@@ -1248,6 +1252,15 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
 	struct fwnet_peer *peer;
 	unsigned long flags;
 
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* Can this happen? */
+	if (netif_queue_stopped(dev->netdev)) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		return NETDEV_TX_BUSY;
+	}
+
 	ptask = kmem_cache_alloc(fwnet_packet_task_cache, GFP_ATOMIC);
 	if (ptask == NULL)
 		goto fail;
@@ -1266,9 +1279,6 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
 	proto = hdr_buf.h_proto;
 	dg_size = skb->len;
 
-	/* serialize access to peer, including peer->datagram_label */
-	spin_lock_irqsave(&dev->lock, flags);
-
 	/*
 	 * Set the transmission type for the packet.  ARP packets and IP
 	 * broadcast packets are sent via GASP.
@@ -1290,7 +1300,7 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
 
 		peer = fwnet_peer_find_by_guid(dev, be64_to_cpu(guid));
 		if (!peer || peer->fifo == FWNET_NO_FIFO_ADDR)
-			goto fail_unlock;
+			goto fail;
 
 		generation         = peer->generation;
 		dest_node          = peer->node_id;
@@ -1344,7 +1354,8 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
 		max_payload += RFC2374_FRAG_HDR_SIZE;
 	}
 
-	dev->queued_datagrams++;
+	if (++dev->queued_datagrams == FWNET_MAX_QUEUED_DATAGRAMS)
+		netif_stop_queue(dev->netdev);
 
 	spin_unlock_irqrestore(&dev->lock, flags);
 
@@ -1355,9 +1366,9 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
 
 	return NETDEV_TX_OK;
 
- fail_unlock:
-	spin_unlock_irqrestore(&dev->lock, flags);
  fail:
+	spin_unlock_irqrestore(&dev->lock, flags);
+
 	if (ptask)
 		kmem_cache_free(fwnet_packet_task_cache, ptask);
 
@@ -1403,7 +1414,7 @@ static void fwnet_init_dev(struct net_device *net)
 	net->addr_len		= FWNET_ALEN;
 	net->hard_header_len	= FWNET_HLEN;
 	net->type		= ARPHRD_IEEE1394;
-	net->tx_queue_len	= 10;
+	net->tx_queue_len	= FWNET_TX_QUEUE_LEN;
 }
 
 /* caller must hold fwnet_device_mutex */

From 59365d136d205cc20fe666ca7f89b1c5001b0d5a Mon Sep 17 00:00:00 2001
From: Marcus Meissner <meissner@suse.de>
Date: Tue, 16 Nov 2010 11:46:03 +0100
Subject: [PATCH 0670/1066] kernel: make /proc/kallsyms mode 400 to reduce ease
 of attacking

Making /proc/kallsyms readable only for root by default makes it
slightly harder for attackers to write generic kernel exploits by
removing one source of knowledge where things are in the kernel.

This is the second submit, discussion happened on this on first submit
and mostly concerned that this is just one hole of the sieve ...  but
one of the bigger ones.

Changing the permissions of at least System.map and vmlinux is also
required to fix the same set, but a packaging issue.

Target of this starter patch and follow ups is removing any kind of
kernel space address information leak from the kernel.

[ Side note: the default of root-only reading is the "safe" value, and
  it's easy enough to then override at any time after boot.  The /proc
  filesystem allows root to change the permissions with a regular
  chmod, so you can "revert" this at run-time by simply doing

    chmod og+r /proc/kallsyms

  as root if you really want regular users to see the kernel symbols.
  It does help some tools like "perf" figure them out without any
  setup, so it may well make sense in some situations.  - Linus ]

Signed-off-by: Marcus Meissner <meissner@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Eugene Teo <eugeneteo@kernel.org>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/kallsyms.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c
index 6f6d091b5757..a8db2570f99a 100644
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -546,7 +546,7 @@ static const struct file_operations kallsyms_operations = {
 
 static int __init kallsyms_init(void)
 {
-	proc_create("kallsyms", 0444, NULL, &kallsyms_operations);
+	proc_create("kallsyms", 0400, NULL, &kallsyms_operations);
 	return 0;
 }
 device_initcall(kallsyms_init);

From b22fe37b9907bf9cd61665ed4b865bc1d5cf71e8 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 17 Nov 2010 13:08:58 +0900
Subject: [PATCH 0671/1066] MAINTAINERS: Add fbdev patchwork entry, tidy up
 file patterns.

Now that the patchwork queue is up, add it in. While we're at it, fix up
the file patterns, too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 MAINTAINERS | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 8e6548dbd5db..1bbf688d2554 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2435,10 +2435,12 @@ F:	drivers/net/wan/sdla.c
 FRAMEBUFFER LAYER
 L:	linux-fbdev@vger.kernel.org
 W:	http://linux-fbdev.sourceforge.net/
+Q:	http://patchwork.kernel.org/project/linux-fbdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git
 S:	Orphan
 F:	Documentation/fb/
-F:	drivers/video/fb*
+F:	drivers/video/
+F:	include/video/
 F:	include/linux/fb.h
 
 FREESCALE DMA DRIVER

From c353103de8795358af1584088aa471571decb307 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Sat, 13 Nov 2010 13:06:38 +0300
Subject: [PATCH 0672/1066] fbcmap: cleanup white space in fb_alloc_cmap()

checkpatch.pl and Andrew Morton both complained about the indenting in
fb_alloc_cmap()

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/fbcmap.c | 52 +++++++++++++++++++++++-------------------
 1 file changed, 29 insertions(+), 23 deletions(-)

diff --git a/drivers/video/fbcmap.c b/drivers/video/fbcmap.c
index f53b9f1d6aba..a79b9762901e 100644
--- a/drivers/video/fbcmap.c
+++ b/drivers/video/fbcmap.c
@@ -90,32 +90,38 @@ static const struct fb_cmap default_16_colors = {
 
 int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp)
 {
-    int size = len*sizeof(u16);
+	int size = len * sizeof(u16);
 
-    if (cmap->len != len) {
-	fb_dealloc_cmap(cmap);
-	if (!len)
-	    return 0;
-	if (!(cmap->red = kmalloc(size, GFP_ATOMIC)))
-	    goto fail;
-	if (!(cmap->green = kmalloc(size, GFP_ATOMIC)))
-	    goto fail;
-	if (!(cmap->blue = kmalloc(size, GFP_ATOMIC)))
-	    goto fail;
-	if (transp) {
-	    if (!(cmap->transp = kmalloc(size, GFP_ATOMIC)))
-		goto fail;
-	} else
-	    cmap->transp = NULL;
-    }
-    cmap->start = 0;
-    cmap->len = len;
-    fb_copy_cmap(fb_default_cmap(len), cmap);
-    return 0;
+	if (cmap->len != len) {
+		fb_dealloc_cmap(cmap);
+		if (!len)
+			return 0;
+
+		cmap->red = kmalloc(size, GFP_ATOMIC);
+		if (!cmap->red)
+			goto fail;
+		cmap->green = kmalloc(size, GFP_ATOMIC);
+		if (!cmap->green)
+			goto fail;
+		cmap->blue = kmalloc(size, GFP_ATOMIC);
+		if (!cmap->blue)
+			goto fail;
+		if (transp) {
+			cmap->transp = kmalloc(size, GFP_ATOMIC);
+			if (!cmap->transp)
+				goto fail;
+		} else {
+			cmap->transp = NULL;
+		}
+	}
+	cmap->start = 0;
+	cmap->len = len;
+	fb_copy_cmap(fb_default_cmap(len), cmap);
+	return 0;
 
 fail:
-    fb_dealloc_cmap(cmap);
-    return -ENOMEM;
+	fb_dealloc_cmap(cmap);
+	return -ENOMEM;
 }
 
 /**

From 1e7c7804884fc5751e3872f13498fd533325f8b2 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Tue, 16 Nov 2010 12:11:02 +0300
Subject: [PATCH 0673/1066] fbcmap: integer overflow bug

There is an integer overflow in fb_set_user_cmap() because cmap->len * 2
can wrap.  It's basically harmless.  Your terminal will be messed up
until you type reset.

This patch does three things to fix the bug.

First, it checks the return value of fb_copy_cmap() in fb_alloc_cmap().
That is enough to fix address the overflow.

Second it checks for the integer overflow in fb_set_user_cmap().

Lastly I wanted to cap "cmap->len" in fb_set_user_cmap() much lower
because it gets used to determine the size of allocation.  Unfortunately
no one knows what the limit should be.  Instead what this patch does
is makes the allocation happen with GFP_KERNEL instead of GFP_ATOMIC
and lets the kmalloc() decide what values of cmap->len are reasonable.
To do this, the patch introduces a function called fb_alloc_cmap_gfp()
which is like fb_alloc_cmap() except that it takes a GFP flag.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/fbcmap.c | 28 ++++++++++++++++++++--------
 include/linux/fb.h     |  1 +
 2 files changed, 21 insertions(+), 8 deletions(-)

diff --git a/drivers/video/fbcmap.c b/drivers/video/fbcmap.c
index a79b9762901e..affdf3e32cf3 100644
--- a/drivers/video/fbcmap.c
+++ b/drivers/video/fbcmap.c
@@ -88,26 +88,27 @@ static const struct fb_cmap default_16_colors = {
  *
  */
 
-int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp)
+int fb_alloc_cmap_gfp(struct fb_cmap *cmap, int len, int transp, gfp_t flags)
 {
 	int size = len * sizeof(u16);
+	int ret = -ENOMEM;
 
 	if (cmap->len != len) {
 		fb_dealloc_cmap(cmap);
 		if (!len)
 			return 0;
 
-		cmap->red = kmalloc(size, GFP_ATOMIC);
+		cmap->red = kmalloc(size, flags);
 		if (!cmap->red)
 			goto fail;
-		cmap->green = kmalloc(size, GFP_ATOMIC);
+		cmap->green = kmalloc(size, flags);
 		if (!cmap->green)
 			goto fail;
-		cmap->blue = kmalloc(size, GFP_ATOMIC);
+		cmap->blue = kmalloc(size, flags);
 		if (!cmap->blue)
 			goto fail;
 		if (transp) {
-			cmap->transp = kmalloc(size, GFP_ATOMIC);
+			cmap->transp = kmalloc(size, flags);
 			if (!cmap->transp)
 				goto fail;
 		} else {
@@ -116,12 +117,19 @@ int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp)
 	}
 	cmap->start = 0;
 	cmap->len = len;
-	fb_copy_cmap(fb_default_cmap(len), cmap);
+	ret = fb_copy_cmap(fb_default_cmap(len), cmap);
+	if (ret)
+		goto fail;
 	return 0;
 
 fail:
 	fb_dealloc_cmap(cmap);
-	return -ENOMEM;
+	return ret;
+}
+
+int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp)
+{
+	return fb_alloc_cmap_gfp(cmap, len, transp, GFP_ATOMIC);
 }
 
 /**
@@ -256,8 +264,12 @@ int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *info)
 	int rc, size = cmap->len * sizeof(u16);
 	struct fb_cmap umap;
 
+	if (size < 0 || size < cmap->len)
+		return -E2BIG;
+
 	memset(&umap, 0, sizeof(struct fb_cmap));
-	rc = fb_alloc_cmap(&umap, cmap->len, cmap->transp != NULL);
+	rc = fb_alloc_cmap_gfp(&umap, cmap->len, cmap->transp != NULL,
+				GFP_KERNEL);
 	if (rc)
 		return rc;
 	if (copy_from_user(umap.red, cmap->red, size) ||
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 7fca3dc4e475..d1631d37e9e0 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -1122,6 +1122,7 @@ extern const struct fb_videomode *fb_find_best_display(const struct fb_monspecs
 
 /* drivers/video/fbcmap.c */
 extern int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp);
+extern int fb_alloc_cmap_gfp(struct fb_cmap *cmap, int len, int transp, gfp_t flags);
 extern void fb_dealloc_cmap(struct fb_cmap *cmap);
 extern int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to);
 extern int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to);

From ad913da61aeb267ac99a649834a0cb1a963d7ec2 Mon Sep 17 00:00:00 2001
From: Daniel Drake <dsd@laptop.org>
Date: Sun, 14 Nov 2010 14:12:31 +0000
Subject: [PATCH 0674/1066] lxfb: Program panel v/h sync output polarity
 correctly

Commit b5c26f97ec4a17c65 introduced some breakage for the OLPC XO-1 laptop,
differences in the output video signal after the patch caused some problems
with the XO's display controller chip.

Reviewing of that commit against the AMD Geode LX Data Book, it seems
that these bits were being set inversely. In both cases, active high
output is denoted by a value of 0. See section 6.8.3.44 of the databook
from February 2009 (Publication ID: 33234H)

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/geode/lxfb_ops.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c
index bc35a95e59d4..85ec7f64c42a 100644
--- a/drivers/video/geode/lxfb_ops.c
+++ b/drivers/video/geode/lxfb_ops.c
@@ -276,10 +276,10 @@ static void lx_graphics_enable(struct fb_info *info)
 		write_fp(par, FP_PT1, 0);
 		temp = FP_PT2_SCRC;
 
-		if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
+		if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
 			temp |= FP_PT2_HSP;
 
-		if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
+		if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
 			temp |= FP_PT2_VSP;
 
 		write_fp(par, FP_PT2, temp);

From a6786fdad97d2ef4454f75a11a4f2a3bf67f2348 Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Wed, 17 Nov 2010 06:51:08 +0000
Subject: [PATCH 0675/1066] sh: avoid to flush all cache in sys_cacheflush

Calling sys_cacheflush with ICACHE we can direclty flush
the icache without invoking the flush_cache_all function.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/sys_sh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 81f58371613d..8c6a350df751 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -88,7 +88,7 @@ asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len, int op)
 	}
 
 	if (op & CACHEFLUSH_I)
-		flush_cache_all();
+		flush_icache_range(addr, addr+len);
 
 	up_read(&current->mm->mmap_sem);
 	return 0;

From 94ab115fd3e7f7e7f92f1645bbb6ba5414701b25 Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Wed, 17 Nov 2010 06:51:52 +0000
Subject: [PATCH 0676/1066] sh: fix vsyscall compilation due to .eh_frame issue

This patch fixes the following error obtained when
compile the Kernel with the VSYSCALL support enabled:

  SYSCALL arch/sh/kernel/vsyscall/vsyscall-trapa.so
  sh4-linux/bin/ld: error in arch/sh/kernel/vsyscall/vsyscall-trapa.o(.eh_frame);
  no .eh_frame_hdr table will be created.
  AS      arch/sh/kernel/vsyscall/vsyscall-syscall.o

Disassembling the vsyscall-trapa.o code, with this fix applied,
we get the __kernel_vsyscall symbol defined; otherwise it was
missing.

Disassembly of section .text:

00000000 <__kernel_vsyscall>:
   0:	10 00       	.word 0x0010
   2:	00 00       	.word 0x0000
[snip]
0000040 <__kernel_sigreturn>:
  40:	05 93       	mov.w	4e <__kernel_sigreturn+0xe>,r3	! 77
  42:	10 c3       	trapa	#16
[snip]

00000060 <__kernel_rt_sigreturn>:
  60:	05 93       	mov.w	6e <__kernel_rt_sigreturn+0xe>,r3	! ad
  62:	10 c3       	trapa	#16
[snip]

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Reviewed-by: Carmelo Amoroso <carmelo.amoroso@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/vsyscall/vsyscall-trapa.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sh/kernel/vsyscall/vsyscall-trapa.S b/arch/sh/kernel/vsyscall/vsyscall-trapa.S
index 3b6eb34c43fa..3e70f851cdc6 100644
--- a/arch/sh/kernel/vsyscall/vsyscall-trapa.S
+++ b/arch/sh/kernel/vsyscall/vsyscall-trapa.S
@@ -8,9 +8,9 @@ __kernel_vsyscall:
 	 * fill out .eh_frame -- PFM. */
 .LEND_vsyscall:
 	.size __kernel_vsyscall,.-.LSTART_vsyscall
-	.previous
 
 	.section .eh_frame,"a",@progbits
+	.previous
 .LCIE:
 	.ualong	.LCIE_end - .LCIE_start
 .LCIE_start:

From bbe425cd9ae83eacd0c9f09df2bf56dc911a54cd Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Wed, 17 Nov 2010 11:56:13 +0100
Subject: [PATCH 0677/1066] cciss: fix build for PROC_FS disabled

The recent patch to fix the removal of a non-existing proc
directory introduced this build problem for !CONFIG_PROC_FS:

drivers/block/cciss.c:4929: error: 'proc_cciss' undeclared (first use in this function)

Fix it by moving proc_cciss outside of the CONFIG_PROC_FS scope.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 drivers/block/cciss.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index a67d0a611a8a..f291587d753e 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -66,6 +66,7 @@ MODULE_VERSION("3.6.26");
 MODULE_LICENSE("GPL");
 
 static DEFINE_MUTEX(cciss_mutex);
+static struct proc_dir_entry *proc_cciss;
 
 #include "cciss_cmd.h"
 #include "cciss.h"
@@ -363,8 +364,6 @@ static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
 #define ENG_GIG_FACTOR (ENG_GIG/512)
 #define ENGAGE_SCSI	"engage scsi"
 
-static struct proc_dir_entry *proc_cciss;
-
 static void cciss_seq_show_header(struct seq_file *seq)
 {
 	ctlr_info_t *h = seq->private;

From 451a3c24b0135bce54542009b5fde43846c7cf67 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Wed, 17 Nov 2010 16:26:55 +0100
Subject: [PATCH 0678/1066] BKL: remove extraneous #include <smp_lock.h>

The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/blackfin/kernel/process.c                      | 1 -
 arch/frv/kernel/process.c                           | 1 -
 arch/h8300/kernel/process.c                         | 1 -
 arch/m68k/kernel/process.c                          | 1 -
 arch/m68knommu/kernel/process.c                     | 1 -
 arch/mn10300/kernel/process.c                       | 1 -
 arch/parisc/hpux/sys_hpux.c                         | 1 -
 arch/parisc/kernel/sys_parisc32.c                   | 1 -
 arch/powerpc/kernel/sys_ppc32.c                     | 1 -
 arch/s390/kernel/compat_linux.c                     | 1 -
 arch/sparc/kernel/leon_smp.c                        | 1 -
 arch/sparc/kernel/sys_sparc32.c                     | 1 -
 arch/sparc/kernel/sys_sparc_32.c                    | 1 -
 arch/sparc/kernel/unaligned_32.c                    | 1 -
 arch/sparc/kernel/windows.c                         | 1 -
 arch/tile/kernel/compat.c                           | 1 -
 arch/tile/kernel/compat_signal.c                    | 1 -
 arch/tile/kernel/signal.c                           | 1 -
 arch/tile/kernel/smpboot.c                          | 1 -
 arch/tile/kernel/sys.c                              | 1 -
 arch/tile/mm/fault.c                                | 1 -
 arch/tile/mm/hugetlbpage.c                          | 1 -
 arch/um/kernel/exec.c                               | 1 -
 arch/x86/ia32/sys_ia32.c                            | 1 -
 arch/x86/kernel/cpuid.c                             | 1 -
 arch/x86/kernel/msr.c                               | 1 -
 block/compat_ioctl.c                                | 1 -
 block/ioctl.c                                       | 1 -
 drivers/block/drbd/drbd_receiver.c                  | 1 -
 drivers/block/drbd/drbd_worker.c                    | 1 -
 drivers/char/agp/frontend.c                         | 1 -
 drivers/char/amiserial.c                            | 1 -
 drivers/char/briq_panel.c                           | 1 -
 drivers/char/hpet.c                                 | 1 -
 drivers/char/hw_random/core.c                       | 1 -
 drivers/char/istallion.c                            | 1 -
 drivers/char/serial167.c                            | 1 -
 drivers/char/specialix.c                            | 1 -
 drivers/char/stallion.c                             | 1 -
 drivers/char/sx.c                                   | 1 -
 drivers/char/uv_mmtimer.c                           | 1 -
 drivers/gpu/drm/drm_fops.c                          | 1 -
 drivers/hid/hidraw.c                                | 1 -
 drivers/hid/usbhid/hiddev.c                         | 1 -
 drivers/infiniband/hw/ipath/ipath_file_ops.c        | 1 -
 drivers/input/input.c                               | 1 -
 drivers/input/serio/serio_raw.c                     | 1 -
 drivers/media/dvb/dvb-core/dvb_ca_en50221.c         | 1 -
 drivers/media/dvb/dvb-core/dvb_frontend.c           | 1 -
 drivers/media/dvb/ngene/ngene-core.c                | 1 -
 drivers/media/dvb/ngene/ngene-dvb.c                 | 1 -
 drivers/media/dvb/ngene/ngene-i2c.c                 | 1 -
 drivers/media/radio/radio-mr800.c                   | 1 -
 drivers/media/radio/si470x/radio-si470x.h           | 1 -
 drivers/media/video/bt8xx/bttv-driver.c             | 1 -
 drivers/media/video/cx88/cx88-blackbird.c           | 1 -
 drivers/media/video/cx88/cx88-video.c               | 1 -
 drivers/media/video/pwc/pwc-if.c                    | 1 -
 drivers/media/video/s2255drv.c                      | 1 -
 drivers/media/video/saa7134/saa7134-empress.c       | 1 -
 drivers/media/video/saa7164/saa7164.h               | 1 -
 drivers/media/video/usbvision/usbvision-video.c     | 1 -
 drivers/media/video/v4l2-compat-ioctl32.c           | 1 -
 drivers/net/wireless/orinoco/orinoco_usb.c          | 1 -
 drivers/parisc/eisa_eeprom.c                        | 1 -
 drivers/pci/proc.c                                  | 1 -
 drivers/pnp/isapnp/proc.c                           | 1 -
 drivers/s390/block/dasd_eer.c                       | 1 -
 drivers/s390/char/fs3270.c                          | 1 -
 drivers/s390/char/tape_char.c                       | 1 -
 drivers/s390/char/vmlogrdr.c                        | 1 -
 drivers/s390/char/vmur.c                            | 1 -
 drivers/s390/crypto/zcrypt_api.c                    | 1 -
 drivers/scsi/hpsa.c                                 | 1 -
 drivers/scsi/pm8001/pm8001_sas.h                    | 1 -
 drivers/scsi/sd.c                                   | 1 -
 drivers/serial/crisv10.c                            | 1 -
 drivers/serial/serial_core.c                        | 1 -
 drivers/staging/cx25821/cx25821.h                   | 1 -
 drivers/staging/easycap/easycap.h                   | 1 -
 drivers/staging/intel_sst/intel_sst_app_interface.c | 1 -
 drivers/staging/rtl8712/osdep_service.h             | 1 -
 drivers/staging/speakup/buffers.c                   | 1 -
 drivers/usb/core/devices.c                          | 1 -
 drivers/usb/core/devio.c                            | 1 -
 drivers/usb/core/file.c                             | 1 -
 drivers/usb/core/inode.c                            | 1 -
 drivers/usb/gadget/f_fs.c                           | 1 -
 drivers/usb/gadget/f_hid.c                          | 1 -
 drivers/usb/host/isp1362-hcd.c                      | 1 -
 drivers/usb/host/uhci-debug.c                       | 1 -
 drivers/usb/mon/mon_bin.c                           | 1 -
 drivers/usb/mon/mon_stat.c                          | 1 -
 drivers/usb/serial/usb-serial.c                     | 1 -
 drivers/video/console/vgacon.c                      | 1 -
 drivers/xen/xenfs/privcmd.c                         | 1 -
 drivers/zorro/proc.c                                | 1 -
 fs/block_dev.c                                      | 1 -
 fs/ceph/inode.c                                     | 1 -
 fs/ceph/mds_client.c                                | 1 -
 fs/compat_ioctl.c                                   | 1 -
 fs/ecryptfs/super.c                                 | 1 -
 fs/ext3/super.c                                     | 1 -
 fs/ioctl.c                                          | 1 -
 fs/lockd/clntlock.c                                 | 1 -
 fs/lockd/clntproc.c                                 | 1 -
 fs/lockd/svc4proc.c                                 | 1 -
 fs/lockd/svclock.c                                  | 1 -
 fs/lockd/svcproc.c                                  | 1 -
 fs/locks.c                                          | 1 -
 fs/namespace.c                                      | 1 -
 fs/ncpfs/dir.c                                      | 1 -
 fs/ncpfs/file.c                                     | 1 -
 fs/ncpfs/inode.c                                    | 1 -
 fs/ncpfs/ioctl.c                                    | 1 -
 fs/nfs/callback.c                                   | 1 -
 fs/nfs/delegation.c                                 | 1 -
 fs/nfs/super.c                                      | 1 -
 fs/ocfs2/super.c                                    | 1 -
 fs/proc/inode.c                                     | 1 -
 fs/read_write.c                                     | 1 -
 fs/reiserfs/inode.c                                 | 1 -
 fs/reiserfs/ioctl.c                                 | 1 -
 fs/reiserfs/journal.c                               | 1 -
 fs/reiserfs/super.c                                 | 1 -
 include/linux/hardirq.h                             | 1 -
 include/linux/reiserfs_fs.h                         | 1 -
 include/linux/tty.h                                 | 1 -
 init/main.c                                         | 1 -
 kernel/trace/trace.c                                | 1 -
 net/irda/af_irda.c                                  | 1 -
 net/irda/irnet/irnet_ppp.c                          | 1 -
 net/sunrpc/svc_xprt.c                               | 1 -
 sound/core/info.c                                   | 1 -
 sound/core/pcm_native.c                             | 1 -
 sound/core/sound.c                                  | 1 -
 sound/sound_core.c                                  | 1 -
 137 files changed, 137 deletions(-)

diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index cd0c090ebc54..b407bc8ad918 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -7,7 +7,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <linux/unistd.h>
 #include <linux/user.h>
 #include <linux/uaccess.h>
diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c
index 2b63b0191f52..efad12071c2e 100644
--- a/arch/frv/kernel/process.c
+++ b/arch/frv/kernel/process.c
@@ -16,7 +16,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index 97478138e361..933bd388efb2 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -28,7 +28,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index 18732ab23292..c2a1fc23dd75 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -18,7 +18,6 @@
 #include <linux/slab.h>
 #include <linux/fs.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 6d3390590e5b..e2a63af5d517 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -19,7 +19,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index 0d0f8049a17b..e1b14a6ed544 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c
index ba430a03bc7a..30394081d9b6 100644
--- a/arch/parisc/hpux/sys_hpux.c
+++ b/arch/parisc/hpux/sys_hpux.c
@@ -28,7 +28,6 @@
 #include <linux/namei.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/utsname.h>
 #include <linux/vfs.h>
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 9779ece2b070..88a0ad14a9c9 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -20,7 +20,6 @@
 #include <linux/times.h>
 #include <linux/time.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index b1b6043a56c4..4e5bf1edc0f2 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -23,7 +23,6 @@
 #include <linux/resource.h>
 #include <linux/times.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 1e6449c79ab6..53acaa86dd94 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -25,7 +25,6 @@
 #include <linux/resource.h>
 #include <linux/times.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>
diff --git a/arch/sparc/kernel/leon_smp.c b/arch/sparc/kernel/leon_smp.c
index 7524689b03d2..16582d85368a 100644
--- a/arch/sparc/kernel/leon_smp.c
+++ b/arch/sparc/kernel/leon_smp.c
@@ -12,7 +12,6 @@
 #include <linux/sched.h>
 #include <linux/threads.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <linux/init.h>
diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c
index e6375a750d9a..6db18c6927fb 100644
--- a/arch/sparc/kernel/sys_sparc32.c
+++ b/arch/sparc/kernel/sys_sparc32.c
@@ -17,7 +17,6 @@
 #include <linux/resource.h>
 #include <linux/times.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>
diff --git a/arch/sparc/kernel/sys_sparc_32.c b/arch/sparc/kernel/sys_sparc_32.c
index 675c9e11ada5..42b282fa6112 100644
--- a/arch/sparc/kernel/sys_sparc_32.c
+++ b/arch/sparc/kernel/sys_sparc_32.c
@@ -19,7 +19,6 @@
 #include <linux/mman.h>
 #include <linux/utsname.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/ipc.h>
 
 #include <asm/uaccess.h>
diff --git a/arch/sparc/kernel/unaligned_32.c b/arch/sparc/kernel/unaligned_32.c
index 12b9f352595f..4491f4cb2695 100644
--- a/arch/sparc/kernel/unaligned_32.c
+++ b/arch/sparc/kernel/unaligned_32.c
@@ -16,7 +16,6 @@
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/perf_event.h>
 
 enum direction {
diff --git a/arch/sparc/kernel/windows.c b/arch/sparc/kernel/windows.c
index b351770cbdd6..3107381e576d 100644
--- a/arch/sparc/kernel/windows.c
+++ b/arch/sparc/kernel/windows.c
@@ -9,7 +9,6 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 
 #include <asm/uaccess.h>
 
diff --git a/arch/tile/kernel/compat.c b/arch/tile/kernel/compat.c
index 67617a05e602..dbc213adf5e1 100644
--- a/arch/tile/kernel/compat.c
+++ b/arch/tile/kernel/compat.c
@@ -21,7 +21,6 @@
 #include <linux/kdev_t.h>
 #include <linux/fs.h>
 #include <linux/fcntl.h>
-#include <linux/smp_lock.h>
 #include <linux/uaccess.h>
 #include <linux/signal.h>
 #include <asm/syscalls.h>
diff --git a/arch/tile/kernel/compat_signal.c b/arch/tile/kernel/compat_signal.c
index fb64b99959d4..543d6a33aa26 100644
--- a/arch/tile/kernel/compat_signal.c
+++ b/arch/tile/kernel/compat_signal.c
@@ -15,7 +15,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/errno.h>
diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c
index 687719d4abd1..757407e36696 100644
--- a/arch/tile/kernel/signal.c
+++ b/arch/tile/kernel/signal.c
@@ -16,7 +16,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/errno.h>
diff --git a/arch/tile/kernel/smpboot.c b/arch/tile/kernel/smpboot.c
index 74d62d098edf..b949edcec200 100644
--- a/arch/tile/kernel/smpboot.c
+++ b/arch/tile/kernel/smpboot.c
@@ -18,7 +18,6 @@
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/kernel_stat.h>
-#include <linux/smp_lock.h>
 #include <linux/bootmem.h>
 #include <linux/notifier.h>
 #include <linux/cpu.h>
diff --git a/arch/tile/kernel/sys.c b/arch/tile/kernel/sys.c
index 7e764669a022..e2187d24a9b4 100644
--- a/arch/tile/kernel/sys.c
+++ b/arch/tile/kernel/sys.c
@@ -20,7 +20,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/mman.h>
 #include <linux/file.h>
diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c
index f295b4ac941d..dcebfc831cd6 100644
--- a/arch/tile/mm/fault.c
+++ b/arch/tile/mm/fault.c
@@ -24,7 +24,6 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/tty.h>
diff --git a/arch/tile/mm/hugetlbpage.c b/arch/tile/mm/hugetlbpage.c
index 24688b697a8d..201a582c4137 100644
--- a/arch/tile/mm/hugetlbpage.c
+++ b/arch/tile/mm/hugetlbpage.c
@@ -21,7 +21,6 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
-#include <linux/smp_lock.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/sysctl.h>
diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c
index 340268be00b5..09bd7b585726 100644
--- a/arch/um/kernel/exec.c
+++ b/arch/um/kernel/exec.c
@@ -5,7 +5,6 @@
 
 #include "linux/stddef.h"
 #include "linux/fs.h"
-#include "linux/smp_lock.h"
 #include "linux/ptrace.h"
 #include "linux/sched.h"
 #include "linux/slab.h"
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index 849813f398e7..5852519b2d0f 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -28,7 +28,6 @@
 #include <linux/syscalls.h>
 #include <linux/times.h>
 #include <linux/utsname.h>
-#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/uio.h>
 #include <linux/poll.h>
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 1b7b31ab7d86..212a6a42527c 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -33,7 +33,6 @@
 #include <linux/init.h>
 #include <linux/poll.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/device.h>
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 7bf2dc4c8f70..12fcbe2c143e 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -30,7 +30,6 @@
 #include <linux/init.h>
 #include <linux/poll.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/device.h>
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index 58c6ee5b010c..cc3eb78e333a 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -8,7 +8,6 @@
 #include <linux/hdreg.h>
 #include <linux/slab.h>
 #include <linux/syscalls.h>
-#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/uaccess.h>
 
diff --git a/block/ioctl.c b/block/ioctl.c
index 3d866d0037f2..a9a302eba01e 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -5,7 +5,6 @@
 #include <linux/hdreg.h>
 #include <linux/backing-dev.h>
 #include <linux/buffer_head.h>
-#include <linux/smp_lock.h>
 #include <linux/blktrace_api.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index d299fe9e78c8..89d8a7cc4054 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -36,7 +36,6 @@
 #include <linux/memcontrol.h>
 #include <linux/mm_inline.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/pkt_sched.h>
 #define __KERNEL_SYSCALLS__
 #include <linux/unistd.h>
diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
index b0551ba7ad0c..47d223c2409c 100644
--- a/drivers/block/drbd/drbd_worker.c
+++ b/drivers/block/drbd/drbd_worker.c
@@ -26,7 +26,6 @@
 #include <linux/module.h>
 #include <linux/drbd.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/wait.h>
 #include <linux/mm.h>
 #include <linux/memcontrol.h>
diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c
index 43412c03969e..3cb4539a98b2 100644
--- a/drivers/char/agp/frontend.c
+++ b/drivers/char/agp/frontend.c
@@ -39,7 +39,6 @@
 #include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include "agp.h"
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index c0bd6f472c52..6ee3348bc3e4 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -81,7 +81,6 @@ static char *serial_version = "4.30";
 #include <linux/mm.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
 #include <linux/platform_device.h>
diff --git a/drivers/char/briq_panel.c b/drivers/char/briq_panel.c
index f6718f05dad4..095ab90535ce 100644
--- a/drivers/char/briq_panel.c
+++ b/drivers/char/briq_panel.c
@@ -6,7 +6,6 @@
 
 #include <linux/module.h>
 
-#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/tty.h>
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 55b8667f739f..7066e801b9d3 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -14,7 +14,6 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/miscdevice.h>
 #include <linux/major.h>
diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c
index 788da05190cc..2016aad85203 100644
--- a/drivers/char/hw_random/core.c
+++ b/drivers/char/hw_random/core.c
@@ -37,7 +37,6 @@
 #include <linux/kernel.h>
 #include <linux/fs.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/miscdevice.h>
 #include <linux/delay.h>
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 667abd23ad6a..7c6de4c92458 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -21,7 +21,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index f646725bd567..748c3b0ecd89 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -52,7 +52,6 @@
 #include <linux/interrupt.h>
 #include <linux/serial.h>
 #include <linux/serialP.h>
-#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
 #include <linux/ptrace.h>
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index 9f8495b4fc8f..a7616d226a49 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -87,7 +87,6 @@
 #include <linux/tty_flip.h>
 #include <linux/mm.h>
 #include <linux/serial.h>
-#include <linux/smp_lock.h>
 #include <linux/fcntl.h>
 #include <linux/major.h>
 #include <linux/delay.h>
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 4bef6ab83622..461a5a045517 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -40,7 +40,6 @@
 #include <linux/stallion.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/ctype.h>
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index e53f16865397..a786326cea2f 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -216,7 +216,6 @@
 #include <linux/eisa.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/miscdevice.h>
 #include <linux/bitops.h>
diff --git a/drivers/char/uv_mmtimer.c b/drivers/char/uv_mmtimer.c
index 493b47a0d511..956ebe2080a5 100644
--- a/drivers/char/uv_mmtimer.c
+++ b/drivers/char/uv_mmtimer.c
@@ -23,7 +23,6 @@
 #include <linux/interrupt.h>
 #include <linux/time.h>
 #include <linux/math64.h>
-#include <linux/smp_lock.h>
 
 #include <asm/genapic.h>
 #include <asm/uv/uv_hub.h>
diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c
index b744dad5c237..a39794bac04b 100644
--- a/drivers/gpu/drm/drm_fops.c
+++ b/drivers/gpu/drm/drm_fops.c
@@ -37,7 +37,6 @@
 #include "drmP.h"
 #include <linux/poll.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 
 /* from BKL pushdown: note that nothing else serializes idr_find() */
 DEFINE_MUTEX(drm_global_mutex);
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 8a4b32dca9f7..e1f07483691f 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -32,7 +32,6 @@
 #include <linux/hid.h>
 #include <linux/mutex.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 
 #include <linux/hidraw.h>
 
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index fedd88df9a18..984feb351a5a 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -29,7 +29,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/hid.h>
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 6078992da3f0..9292a15ad7c4 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -40,7 +40,6 @@
 #include <linux/highmem.h>
 #include <linux/io.h>
 #include <linux/jiffies.h>
-#include <linux/smp_lock.h>
 #include <asm/pgtable.h>
 
 #include "ipath_kernel.h"
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 7f26ca6ecf75..90b7ecfb6257 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -24,7 +24,6 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/rcupdate.h>
-#include <linux/smp_lock.h>
 #include "input-compat.h"
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index cd82bb125915..b7ba4597f7f0 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -11,7 +11,6 @@
 
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/poll.h>
 #include <linux/module.h>
 #include <linux/serio.h>
diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
index 4d0646da6087..7ea517b7e186 100644
--- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
@@ -36,7 +36,6 @@
 #include <linux/delay.h>
 #include <linux/spinlock.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/kthread.h>
 
 #include "dvb_ca_en50221.h"
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 1589d5a5cb46..cad6634610ea 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -36,7 +36,6 @@
 #include <linux/list.h>
 #include <linux/freezer.h>
 #include <linux/jiffies.h>
-#include <linux/smp_lock.h>
 #include <linux/kthread.h>
 #include <asm/processor.h>
 
diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c
index 4caeb163a666..3a7ef71087be 100644
--- a/drivers/media/dvb/ngene/ngene-core.c
+++ b/drivers/media/dvb/ngene/ngene-core.c
@@ -34,7 +34,6 @@
 #include <linux/io.h>
 #include <asm/div64.h>
 #include <linux/pci.h>
-#include <linux/smp_lock.h>
 #include <linux/timer.h>
 #include <linux/byteorder/generic.h>
 #include <linux/firmware.h>
diff --git a/drivers/media/dvb/ngene/ngene-dvb.c b/drivers/media/dvb/ngene/ngene-dvb.c
index 48f980b21d66..3832e5983c19 100644
--- a/drivers/media/dvb/ngene/ngene-dvb.c
+++ b/drivers/media/dvb/ngene/ngene-dvb.c
@@ -35,7 +35,6 @@
 #include <linux/io.h>
 #include <asm/div64.h>
 #include <linux/pci.h>
-#include <linux/smp_lock.h>
 #include <linux/timer.h>
 #include <linux/byteorder/generic.h>
 #include <linux/firmware.h>
diff --git a/drivers/media/dvb/ngene/ngene-i2c.c b/drivers/media/dvb/ngene/ngene-i2c.c
index c3ae956714e7..d28554f8ce99 100644
--- a/drivers/media/dvb/ngene/ngene-i2c.c
+++ b/drivers/media/dvb/ngene/ngene-i2c.c
@@ -37,7 +37,6 @@
 #include <asm/div64.h>
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
-#include <linux/smp_lock.h>
 #include <linux/timer.h>
 #include <linux/byteorder/generic.h>
 #include <linux/firmware.h>
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index b540e8072e92..e6b2d085a449 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -58,7 +58,6 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/input.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
diff --git a/drivers/media/radio/si470x/radio-si470x.h b/drivers/media/radio/si470x/radio-si470x.h
index ea12782359a0..b9914d7a0c9f 100644
--- a/drivers/media/radio/si470x/radio-si470x.h
+++ b/drivers/media/radio/si470x/radio-si470x.h
@@ -31,7 +31,6 @@
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/input.h>
 #include <linux/version.h>
 #include <linux/videodev2.h>
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 3da6e80e1041..a529619e51f6 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -42,7 +42,6 @@
 #include <linux/fs.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/kdev_t.h>
 #include "bttvp.h"
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index 417d1d5c73c4..d7c94848249e 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -33,7 +33,6 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
-#include <linux/smp_lock.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/cx2341x.h>
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index d2f159daa8b5..88b51194f917 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -31,7 +31,6 @@
 #include <linux/kmod.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index e62beb4efdb4..f3dc89da4c4e 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -62,7 +62,6 @@
 #include <linux/module.h>
 #include <linux/poll.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #ifdef CONFIG_USB_PWC_INPUT_EVDEV
 #include <linux/usb/input.h>
 #endif
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index f5a46c458717..a845753665c1 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -49,7 +49,6 @@
 #include <linux/videodev2.h>
 #include <linux/version.h>
 #include <linux/mm.h>
-#include <linux/smp_lock.h>
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index 1467a30a434f..b890aafe7d64 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -21,7 +21,6 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/smp_lock.h>
 #include <linux/delay.h>
 
 #include "saa7134-reg.h"
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index 1d9c5cbbbc52..041ae8e20f68 100644
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -58,7 +58,6 @@
 #include <media/tveeprom.h>
 #include <media/videobuf-dma-sg.h>
 #include <media/videobuf-dvb.h>
-#include <linux/smp_lock.h>
 #include <dvb_demux.h>
 #include <dvb_frontend.h>
 #include <dvb_net.h>
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index db6b828594f5..011c0c386995 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -50,7 +50,6 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/highmem.h>
 #include <linux/vmalloc.h>
diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c
index 86294ed35c9b..e30e8dfb6205 100644
--- a/drivers/media/video/v4l2-compat-ioctl32.c
+++ b/drivers/media/video/v4l2-compat-ioctl32.c
@@ -18,7 +18,6 @@
 #include <linux/videodev.h>
 #include <linux/videodev2.h>
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <media/v4l2-ioctl.h>
 
 #ifdef CONFIG_COMPAT
diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c
index a38a7bd25f19..b9aedf18a046 100644
--- a/drivers/net/wireless/orinoco/orinoco_usb.c
+++ b/drivers/net/wireless/orinoco/orinoco_usb.c
@@ -57,7 +57,6 @@
 #include <linux/fcntl.h>
 #include <linux/spinlock.h>
 #include <linux/list.h>
-#include <linux/smp_lock.h>
 #include <linux/usb.h>
 #include <linux/timer.h>
 
diff --git a/drivers/parisc/eisa_eeprom.c b/drivers/parisc/eisa_eeprom.c
index cce00ed81f37..af212c6a6158 100644
--- a/drivers/parisc/eisa_eeprom.c
+++ b/drivers/parisc/eisa_eeprom.c
@@ -24,7 +24,6 @@
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/fs.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index ea00647f4732..27911b55c2a5 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -10,7 +10,6 @@
 #include <linux/module.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/smp_lock.h>
 #include <linux/capability.h>
 #include <asm/uaccess.h>
 #include <asm/byteorder.h>
diff --git a/drivers/pnp/isapnp/proc.c b/drivers/pnp/isapnp/proc.c
index e73ebefdf3e0..315b3112aca8 100644
--- a/drivers/pnp/isapnp/proc.c
+++ b/drivers/pnp/isapnp/proc.c
@@ -21,7 +21,6 @@
 #include <linux/isapnp.h>
 #include <linux/proc_fs.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 
 extern struct pnp_protocol isapnp_protocol;
diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c
index c71d89dba302..83b4615a3b62 100644
--- a/drivers/s390/block/dasd_eer.c
+++ b/drivers/s390/block/dasd_eer.c
@@ -17,7 +17,6 @@
 #include <linux/device.h>
 #include <linux/poll.h>
 #include <linux/mutex.h>
-#include <linux/smp_lock.h>
 #include <linux/err.h>
 #include <linux/slab.h>
 
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
index eb28fb01a38a..f6489eb7e976 100644
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -14,7 +14,6 @@
 #include <linux/list.h>
 #include <linux/slab.h>
 #include <linux/types.h>
-#include <linux/smp_lock.h>
 
 #include <asm/compat.h>
 #include <asm/ccwdev.h>
diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c
index 883e2db02bd3..e090a307fdee 100644
--- a/drivers/s390/char/tape_char.c
+++ b/drivers/s390/char/tape_char.c
@@ -17,7 +17,6 @@
 #include <linux/types.h>
 #include <linux/proc_fs.h>
 #include <linux/mtio.h>
-#include <linux/smp_lock.h>
 #include <linux/compat.h>
 
 #include <asm/uaccess.h>
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index 1cc726b98ec8..c837d7419a6a 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -30,7 +30,6 @@
 #include <linux/kmod.h>
 #include <linux/cdev.h>
 #include <linux/device.h>
-#include <linux/smp_lock.h>
 #include <linux/string.h>
 
 MODULE_AUTHOR
diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c
index 1de672f21037..f7e4ae6bf15a 100644
--- a/drivers/s390/char/vmur.c
+++ b/drivers/s390/char/vmur.c
@@ -13,7 +13,6 @@
 
 #include <linux/cdev.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 
 #include <asm/uaccess.h>
 #include <asm/cio.h>
diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c
index f5221749d180..7fca9c10ffcf 100644
--- a/drivers/s390/crypto/zcrypt_api.c
+++ b/drivers/s390/crypto/zcrypt_api.c
@@ -35,7 +35,6 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/compat.h>
-#include <linux/smp_lock.h>
 #include <linux/slab.h>
 #include <asm/atomic.h>
 #include <asm/uaccess.h>
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 3759d1199b0c..b2fb2b2a6e70 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -31,7 +31,6 @@
 #include <linux/seq_file.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
-#include <linux/smp_lock.h>
 #include <linux/compat.h>
 #include <linux/blktrace_api.h>
 #include <linux/uaccess.h>
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 8e38ca8cd101..7f064f9ca828 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -50,7 +50,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
-#include <linux/smp_lock.h>
 #include <scsi/libsas.h>
 #include <scsi/scsi_tcq.h>
 #include <scsi/sas_ata.h>
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index b9ab3a590e4b..956496182c80 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -46,7 +46,6 @@
 #include <linux/blkdev.h>
 #include <linux/blkpg.h>
 #include <linux/delay.h>
-#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/string_helpers.h>
 #include <linux/async.h>
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index fa62578fcd20..bcc31f2140ac 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -18,7 +18,6 @@ static char *serial_version = "$Revision: 1.25 $";
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/major.h>
-#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index c4ea14670d44..9ffa5bee44ab 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -29,7 +29,6 @@
 #include <linux/console.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/smp_lock.h>
 #include <linux/device.h>
 #include <linux/serial.h> /* for serial_state and serial_icounter_struct */
 #include <linux/serial_core.h>
diff --git a/drivers/staging/cx25821/cx25821.h b/drivers/staging/cx25821/cx25821.h
index c94000125782..acfd0176a184 100644
--- a/drivers/staging/cx25821/cx25821.h
+++ b/drivers/staging/cx25821/cx25821.h
@@ -31,7 +31,6 @@
 #include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/kdev_t.h>
-#include <linux/smp_lock.h>
 
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>
diff --git a/drivers/staging/easycap/easycap.h b/drivers/staging/easycap/easycap.h
index f3c827eb0abe..25961c23dc0f 100644
--- a/drivers/staging/easycap/easycap.h
+++ b/drivers/staging/easycap/easycap.h
@@ -77,7 +77,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/kref.h>
-#include <linux/smp_lock.h>
 #include <linux/usb.h>
 #include <linux/uaccess.h>
 
diff --git a/drivers/staging/intel_sst/intel_sst_app_interface.c b/drivers/staging/intel_sst/intel_sst_app_interface.c
index 9618c7997461..991440015e92 100644
--- a/drivers/staging/intel_sst/intel_sst_app_interface.c
+++ b/drivers/staging/intel_sst/intel_sst_app_interface.c
@@ -34,7 +34,6 @@
 #include <linux/uaccess.h>
 #include <linux/firmware.h>
 #include <linux/ioctl.h>
-#include <linux/smp_lock.h>
 #ifdef CONFIG_MRST_RAR_HANDLER
 #include <linux/rar_register.h>
 #include "../../../drivers/staging/memrar/memrar.h"
diff --git a/drivers/staging/rtl8712/osdep_service.h b/drivers/staging/rtl8712/osdep_service.h
index d1674cd282dc..831d81e0e429 100644
--- a/drivers/staging/rtl8712/osdep_service.h
+++ b/drivers/staging/rtl8712/osdep_service.h
@@ -22,7 +22,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kref.h>
-#include <linux/smp_lock.h>
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
 #include <linux/usb.h>
diff --git a/drivers/staging/speakup/buffers.c b/drivers/staging/speakup/buffers.c
index b7b60d5e8660..a2db956edd54 100644
--- a/drivers/staging/speakup/buffers.c
+++ b/drivers/staging/speakup/buffers.c
@@ -1,5 +1,4 @@
 #include <linux/console.h>
-#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/wait.h>
 
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index ddb4dc980923..a3d2e2399655 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -54,7 +54,6 @@
 #include <linux/gfp.h>
 #include <linux/poll.h>
 #include <linux/usb.h>
-#include <linux/smp_lock.h>
 #include <linux/usbdevice_fs.h>
 #include <linux/usb/hcd.h>
 #include <linux/mutex.h>
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 045bb4b823e1..a7131ad630f9 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -37,7 +37,6 @@
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/signal.h>
 #include <linux/poll.h>
 #include <linux/module.h>
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 9fe34fb78ef1..cf6a5423de09 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -19,7 +19,6 @@
 #include <linux/errno.h>
 #include <linux/rwsem.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/usb.h>
 
 #include "usb.h"
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 9819a4cc3b26..b690aa35df9a 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -39,7 +39,6 @@
 #include <linux/parser.h>
 #include <linux/notifier.h>
 #include <linux/seq_file.h>
-#include <linux/smp_lock.h>
 #include <linux/usb/hcd.h>
 #include <asm/byteorder.h>
 #include "usb.h"
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 4a830df4fc31..484c5ba5450e 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -30,7 +30,6 @@
 #include <linux/blkdev.h>
 #include <linux/pagemap.h>
 #include <asm/unaligned.h>
-#include <linux/smp_lock.h>
 
 #include <linux/usb/composite.h>
 #include <linux/usb/functionfs.h>
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 4f891eddd060..598e7e2ab80c 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -25,7 +25,6 @@
 #include <linux/cdev.h>
 #include <linux/mutex.h>
 #include <linux/poll.h>
-#include <linux/smp_lock.h>
 #include <linux/uaccess.h>
 #include <linux/wait.h>
 #include <linux/usb/g_hid.h>
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 8196fa11fec4..6c4fb4efb4bb 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -70,7 +70,6 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/list.h>
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index 6e7fb5f38db6..ee60cd3ea642 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -12,7 +12,6 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/debugfs.h>
-#include <linux/smp_lock.h>
 #include <asm/io.h>
 
 #include "uhci-hcd.h"
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index 44cb37b5a4dc..c436e1e2c3b6 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -15,7 +15,6 @@
 #include <linux/poll.h>
 #include <linux/compat.h>
 #include <linux/mm.h>
-#include <linux/smp_lock.h>
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
 
diff --git a/drivers/usb/mon/mon_stat.c b/drivers/usb/mon/mon_stat.c
index 8ec94f15a738..e5ce42bd316e 100644
--- a/drivers/usb/mon/mon_stat.c
+++ b/drivers/usb/mon/mon_stat.c
@@ -11,7 +11,6 @@
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/fs.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 
 #include "usb_mon.h"
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index e64da74bdcc5..861223f2af6e 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -21,7 +21,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 54e32c513610..915448ec75bf 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -47,7 +47,6 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/screen_info.h>
-#include <linux/smp_lock.h>
 #include <video/vga.h>
 #include <asm/io.h>
 
diff --git a/drivers/xen/xenfs/privcmd.c b/drivers/xen/xenfs/privcmd.c
index f80be7f6eb95..0f5d4162b22d 100644
--- a/drivers/xen/xenfs/privcmd.c
+++ b/drivers/xen/xenfs/privcmd.c
@@ -15,7 +15,6 @@
 #include <linux/mman.h>
 #include <linux/uaccess.h>
 #include <linux/swap.h>
-#include <linux/smp_lock.h>
 #include <linux/highmem.h>
 #include <linux/pagemap.h>
 #include <linux/seq_file.h>
diff --git a/drivers/zorro/proc.c b/drivers/zorro/proc.c
index cafc50454292..e0c84725d3e9 100644
--- a/drivers/zorro/proc.c
+++ b/drivers/zorro/proc.c
@@ -13,7 +13,6 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include <asm/amigahw.h>
 #include <asm/setup.h>
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 06e8ff12b97c..4230252fd689 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -11,7 +11,6 @@
 #include <linux/slab.h>
 #include <linux/kmod.h>
 #include <linux/major.h>
-#include <linux/smp_lock.h>
 #include <linux/device_cgroup.h>
 #include <linux/highmem.h>
 #include <linux/blkdev.h>
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 1d6a45b5a04c..524b80be4482 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -2,7 +2,6 @@
 
 #include <linux/module.h>
 #include <linux/fs.h>
-#include <linux/smp_lock.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/uaccess.h>
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 3142b15940c2..7799cac2b629 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -6,7 +6,6 @@
 #include <linux/sched.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
-#include <linux/smp_lock.h>
 
 #include "super.h"
 #include "mds_client.h"
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 410ed188faa1..a60579b007b0 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -19,7 +19,6 @@
 #include <linux/compiler.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/ioctl.h>
 #include <linux/if.h>
 #include <linux/if_bridge.h>
diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c
index 253732382d37..2720178b7718 100644
--- a/fs/ecryptfs/super.c
+++ b/fs/ecryptfs/super.c
@@ -28,7 +28,6 @@
 #include <linux/key.h>
 #include <linux/slab.h>
 #include <linux/seq_file.h>
-#include <linux/smp_lock.h>
 #include <linux/file.h>
 #include <linux/crypto.h>
 #include "ecryptfs_kernel.h"
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 2fedaf8b5012..acf8695fa8f0 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -27,7 +27,6 @@
 #include <linux/init.h>
 #include <linux/blkdev.h>
 #include <linux/parser.h>
-#include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
 #include <linux/exportfs.h>
 #include <linux/vfs.h>
diff --git a/fs/ioctl.c b/fs/ioctl.c
index e92fdbb3bc3a..4f46752ce4f9 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -6,7 +6,6 @@
 
 #include <linux/syscalls.h>
 #include <linux/mm.h>
-#include <linux/smp_lock.h>
 #include <linux/capability.h>
 #include <linux/file.h>
 #include <linux/fs.h>
diff --git a/fs/lockd/clntlock.c b/fs/lockd/clntlock.c
index d5bb86866e6c..25509eb28fd7 100644
--- a/fs/lockd/clntlock.c
+++ b/fs/lockd/clntlock.c
@@ -14,7 +14,6 @@
 #include <linux/sunrpc/clnt.h>
 #include <linux/sunrpc/svc.h>
 #include <linux/lockd/lockd.h>
-#include <linux/smp_lock.h>
 #include <linux/kthread.h>
 
 #define NLMDBG_FACILITY		NLMDBG_CLIENT
diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c
index 47ea1e1925b8..332c54cf75e0 100644
--- a/fs/lockd/clntproc.c
+++ b/fs/lockd/clntproc.c
@@ -7,7 +7,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/errno.h>
diff --git a/fs/lockd/svc4proc.c b/fs/lockd/svc4proc.c
index a336e832475d..38d261192453 100644
--- a/fs/lockd/svc4proc.c
+++ b/fs/lockd/svc4proc.c
@@ -9,7 +9,6 @@
 
 #include <linux/types.h>
 #include <linux/time.h>
-#include <linux/smp_lock.h>
 #include <linux/lockd/lockd.h>
 #include <linux/lockd/share.h>
 
diff --git a/fs/lockd/svclock.c b/fs/lockd/svclock.c
index c462d346acbd..ef5659b211e9 100644
--- a/fs/lockd/svclock.c
+++ b/fs/lockd/svclock.c
@@ -25,7 +25,6 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/sunrpc/clnt.h>
 #include <linux/sunrpc/svc.h>
 #include <linux/lockd/nlm.h>
diff --git a/fs/lockd/svcproc.c b/fs/lockd/svcproc.c
index c3069f38d602..0caea5310ac3 100644
--- a/fs/lockd/svcproc.c
+++ b/fs/lockd/svcproc.c
@@ -9,7 +9,6 @@
 
 #include <linux/types.h>
 #include <linux/time.h>
-#include <linux/smp_lock.h>
 #include <linux/lockd/lockd.h>
 #include <linux/lockd/share.h>
 
diff --git a/fs/locks.c b/fs/locks.c
index 0e62dd35d088..8729347bcd1a 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -122,7 +122,6 @@
 #include <linux/module.h>
 #include <linux/security.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/time.h>
 #include <linux/rcupdate.h>
diff --git a/fs/namespace.c b/fs/namespace.c
index 8a415c9c5e55..3dbfc072ec70 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -13,7 +13,6 @@
 #include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/percpu.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/acct.h>
diff --git a/fs/ncpfs/dir.c b/fs/ncpfs/dir.c
index aac8832e919e..f22b12e7d337 100644
--- a/fs/ncpfs/dir.c
+++ b/fs/ncpfs/dir.c
@@ -19,7 +19,6 @@
 #include <linux/mm.h>
 #include <asm/uaccess.h>
 #include <asm/byteorder.h>
-#include <linux/smp_lock.h>
 
 #include <linux/ncp_fs.h>
 
diff --git a/fs/ncpfs/file.c b/fs/ncpfs/file.c
index 6c754f70c529..cb50aaf981df 100644
--- a/fs/ncpfs/file.c
+++ b/fs/ncpfs/file.c
@@ -17,7 +17,6 @@
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 
 #include <linux/ncp_fs.h>
 #include "ncplib_kernel.h"
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index d290545aa0c4..8fb93b604e73 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -26,7 +26,6 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <linux/vfs.h>
 #include <linux/mount.h>
 #include <linux/seq_file.h>
diff --git a/fs/ncpfs/ioctl.c b/fs/ncpfs/ioctl.c
index c2a1f9a155c3..d40a547e3377 100644
--- a/fs/ncpfs/ioctl.c
+++ b/fs/ncpfs/ioctl.c
@@ -17,7 +17,6 @@
 #include <linux/mount.h>
 #include <linux/slab.h>
 #include <linux/highuid.h>
-#include <linux/smp_lock.h>
 #include <linux/vmalloc.h>
 #include <linux/sched.h>
 
diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c
index aeec017fe814..93a8b3bd69e3 100644
--- a/fs/nfs/callback.c
+++ b/fs/nfs/callback.c
@@ -9,7 +9,6 @@
 #include <linux/completion.h>
 #include <linux/ip.h>
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <linux/sunrpc/svc.h>
 #include <linux/sunrpc/svcsock.h>
 #include <linux/nfs_fs.h>
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index 232a7eead33a..1fd62fc49be3 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -11,7 +11,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 
 #include <linux/nfs4.h>
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 9587506d493c..3c045044fca2 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -39,7 +39,6 @@
 #include <linux/nfs_mount.h>
 #include <linux/nfs4_mount.h>
 #include <linux/lockd/bind.h>
-#include <linux/smp_lock.h>
 #include <linux/seq_file.h>
 #include <linux/mount.h>
 #include <linux/mnt_namespace.h>
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index f02c0ef31578..cfeab7ce3697 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -41,7 +41,6 @@
 #include <linux/mount.h>
 #include <linux/seq_file.h>
 #include <linux/quotaops.h>
-#include <linux/smp_lock.h>
 
 #define MLOG_MASK_PREFIX ML_SUPER
 #include <cluster/masklog.h>
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index 9c2b5f484879..3ddb6068177c 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -16,7 +16,6 @@
 #include <linux/limits.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <linux/sysctl.h>
 #include <linux/slab.h>
 
diff --git a/fs/read_write.c b/fs/read_write.c
index 431a0ed610c8..5d431bacbea9 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -9,7 +9,6 @@
 #include <linux/fcntl.h>
 #include <linux/file.h>
 #include <linux/uio.h>
-#include <linux/smp_lock.h>
 #include <linux/fsnotify.h>
 #include <linux/security.h>
 #include <linux/module.h>
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 41656d40dc5c..0bae036831e2 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -8,7 +8,6 @@
 #include <linux/reiserfs_acl.h>
 #include <linux/reiserfs_xattr.h>
 #include <linux/exportfs.h>
-#include <linux/smp_lock.h>
 #include <linux/pagemap.h>
 #include <linux/highmem.h>
 #include <linux/slab.h>
diff --git a/fs/reiserfs/ioctl.c b/fs/reiserfs/ioctl.c
index adf22b485cea..bd9763e76bae 100644
--- a/fs/reiserfs/ioctl.c
+++ b/fs/reiserfs/ioctl.c
@@ -9,7 +9,6 @@
 #include <linux/time.h>
 #include <asm/uaccess.h>
 #include <linux/pagemap.h>
-#include <linux/smp_lock.h>
 #include <linux/compat.h>
 
 /*
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index 076c8b194682..d31bce1a9f90 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -43,7 +43,6 @@
 #include <linux/fcntl.h>
 #include <linux/stat.h>
 #include <linux/string.h>
-#include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
 #include <linux/workqueue.h>
 #include <linux/writeback.h>
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 3bf7a6457f4d..b243117b8752 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -28,7 +28,6 @@
 #include <linux/mount.h>
 #include <linux/namei.h>
 #include <linux/crc32.h>
-#include <linux/smp_lock.h>
 
 struct file_system_type reiserfs_fs_type;
 
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 41cb31f14ee3..8f3f467c57c6 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -3,7 +3,6 @@
 
 #include <linux/preempt.h>
 #ifdef CONFIG_PREEMPT
-#include <linux/smp_lock.h>
 #endif
 #include <linux/lockdep.h>
 #include <linux/ftrace_irq.h>
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
index 5ca47e59b727..c21072adbfad 100644
--- a/include/linux/reiserfs_fs.h
+++ b/include/linux/reiserfs_fs.h
@@ -22,7 +22,6 @@
 #include <asm/unaligned.h>
 #include <linux/bitops.h>
 #include <linux/proc_fs.h>
-#include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
 #include <linux/reiserfs_fs_i.h>
 #include <linux/reiserfs_fs_sb.h>
diff --git a/include/linux/tty.h b/include/linux/tty.h
index c7ea9bc8897c..032d79ff1d9d 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -13,7 +13,6 @@
 #include <linux/tty_driver.h>
 #include <linux/tty_ldisc.h>
 #include <linux/mutex.h>
-#include <linux/smp_lock.h>
 
 #include <asm/system.h>
 
diff --git a/init/main.c b/init/main.c
index e59af24a0b7c..8646401f7a0e 100644
--- a/init/main.c
+++ b/init/main.c
@@ -20,7 +20,6 @@
 #include <linux/delay.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <linux/initrd.h>
 #include <linux/bootmem.h>
 #include <linux/acpi.h>
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 82d9b8106cd0..042084157980 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -17,7 +17,6 @@
 #include <linux/writeback.h>
 #include <linux/kallsyms.h>
 #include <linux/seq_file.h>
-#include <linux/smp_lock.h>
 #include <linux/notifier.h>
 #include <linux/irqflags.h>
 #include <linux/debugfs.h>
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index 7f097989cde2..a6de3059746d 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -45,7 +45,6 @@
 #include <linux/capability.h>
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/smp_lock.h>
 #include <linux/socket.h>
 #include <linux/sockios.h>
 #include <linux/slab.h>
diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c
index 7fa86373de41..7c567b8aa89a 100644
--- a/net/irda/irnet/irnet_ppp.c
+++ b/net/irda/irnet/irnet_ppp.c
@@ -15,7 +15,6 @@
 
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include "irnet_ppp.h"		/* Private header */
 /* Please put other headers in irnet.h - Thanks */
 
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index c82fe739fbdc..ea2ff78dcf7b 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -5,7 +5,6 @@
  */
 
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/freezer.h>
 #include <linux/kthread.h>
diff --git a/sound/core/info.c b/sound/core/info.c
index b70564ed8b37..7077f601da5a 100644
--- a/sound/core/info.c
+++ b/sound/core/info.c
@@ -23,7 +23,6 @@
 #include <linux/time.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <sound/core.h>
 #include <sound/minors.h>
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 8bc7cb3db330..e82c1f97d99e 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -22,7 +22,6 @@
 #include <linux/mm.h>
 #include <linux/file.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/time.h>
 #include <linux/pm_qos_params.h>
 #include <linux/uio.h>
diff --git a/sound/core/sound.c b/sound/core/sound.c
index 62a093efb453..66691fe437e6 100644
--- a/sound/core/sound.c
+++ b/sound/core/sound.c
@@ -21,7 +21,6 @@
 
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/time.h>
 #include <linux/device.h>
 #include <linux/moduleparam.h>
diff --git a/sound/sound_core.c b/sound/sound_core.c
index c03bbaefdbc3..5580aced8730 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -104,7 +104,6 @@ module_exit(cleanup_soundcore);
 
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sound.h>

From 460781b54253e3ed10a0a2a433bdc548ec952269 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Wed, 17 Nov 2010 16:26:56 +0100
Subject: [PATCH 0679/1066] BKL: remove references to lock_kernel from comments

Lock_kernel is gone from the code, so the comments should be updated,
too.  nfsd now uses lock_flocks instead of lock_kernel to protect
against posix file locks.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/nfsd/nfs4state.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index ad2bfa68d534..116cab970e0f 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -2262,7 +2262,7 @@ nfs4_file_downgrade(struct nfs4_file *fp, unsigned int share_access)
  * Spawn a thread to perform a recall on the delegation represented
  * by the lease (file_lock)
  *
- * Called from break_lease() with lock_kernel() held.
+ * Called from break_lease() with lock_flocks() held.
  * Note: we assume break_lease will only call this *once* for any given
  * lease.
  */
@@ -2286,7 +2286,7 @@ void nfsd_break_deleg_cb(struct file_lock *fl)
 	list_add_tail(&dp->dl_recall_lru, &del_recall_lru);
 	spin_unlock(&recall_lock);
 
-	/* only place dl_time is set. protected by lock_kernel*/
+	/* only place dl_time is set. protected by lock_flocks*/
 	dp->dl_time = get_seconds();
 
 	/*
@@ -2303,7 +2303,7 @@ void nfsd_break_deleg_cb(struct file_lock *fl)
 /*
  * The file_lock is being reapd.
  *
- * Called by locks_free_lock() with lock_kernel() held.
+ * Called by locks_free_lock() with lock_flocks() held.
  */
 static
 void nfsd_release_deleg_cb(struct file_lock *fl)
@@ -2318,7 +2318,7 @@ void nfsd_release_deleg_cb(struct file_lock *fl)
 }
 
 /*
- * Called from setlease() with lock_kernel() held
+ * Called from setlease() with lock_flocks() held
  */
 static
 int nfsd_same_client_deleg_cb(struct file_lock *onlist, struct file_lock *try)

From 55f6561c6941713ab5ae9180525b026dd40b7d14 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Wed, 17 Nov 2010 16:26:53 +0100
Subject: [PATCH 0680/1066] staging/stradis: mark as "depends on BKL"

The stradis driver is on its way out, but it should still be marked
correctly as depending on the big kernel lock.  It could easily be
changed to not require it if someone decides to revive the driver and
port it to v4l2 in the process.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Sedat Dilek <sedat.dilek@googlemail.com>
Cc: Nathan Laredo <laredo@gnu.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/staging/stradis/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/stradis/Kconfig b/drivers/staging/stradis/Kconfig
index 92e891141896..02f0fc504cf5 100644
--- a/drivers/staging/stradis/Kconfig
+++ b/drivers/staging/stradis/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_STRADIS
         tristate "Stradis 4:2:2 MPEG-2 video driver (DEPRECATED)"
-        depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
+        depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS && BKL
         help
           Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
           driver for PCI.  There is a product page at

From 23e701e6208191ad103517ae7a700f2dc59ab2ec Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Wed, 17 Nov 2010 12:03:58 -0500
Subject: [PATCH 0681/1066] [libata] remove SCSI host lock and serial number
 usage from ata_scsi_queuecmd

cmd->serial_number is never tested in any path we reach; therefore we may
remove the call to scsi_cmd_get_serial() inside DEF_SCSI_QCMD, the SCSI
host_lock acquisition surrounding it, and our own SCSI host_lock
unlock+relock cycle.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-scsi.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 19835d39289d..66aa4bee80a6 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3166,8 +3166,8 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
 
 /**
  *	ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device
+ *	@shost: SCSI host of command to be sent
  *	@cmd: SCSI command to be sent
- *	@done: Completion function, called when command is complete
  *
  *	In some cases, this function translates SCSI commands into
  *	ATA taskfiles, and queues the taskfiles to be sent to
@@ -3177,42 +3177,39 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
  *	ATA and ATAPI devices appearing as SCSI devices.
  *
  *	LOCKING:
- *	Releases scsi-layer-held lock, and obtains host lock.
+ *	ATA host lock
  *
  *	RETURNS:
  *	Return value from __ata_scsi_queuecmd() if @cmd can be queued,
  *	0 otherwise.
  */
-static int ata_scsi_queuecmd_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+int ata_scsi_queuecmd(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
 {
 	struct ata_port *ap;
 	struct ata_device *dev;
 	struct scsi_device *scsidev = cmd->device;
-	struct Scsi_Host *shost = scsidev->host;
 	int rc = 0;
+	unsigned long irq_flags;
 
 	ap = ata_shost_to_port(shost);
 
-	spin_unlock(shost->host_lock);
-	spin_lock(ap->lock);
+	spin_lock_irqsave(ap->lock, irq_flags);
 
 	ata_scsi_dump_cdb(ap, cmd);
 
 	dev = ata_scsi_find_dev(ap, scsidev);
 	if (likely(dev))
-		rc = __ata_scsi_queuecmd(cmd, done, dev);
+		rc = __ata_scsi_queuecmd(cmd, cmd->scsi_done, dev);
 	else {
 		cmd->result = (DID_BAD_TARGET << 16);
-		done(cmd);
+		cmd->scsi_done(cmd);
 	}
 
-	spin_unlock(ap->lock);
-	spin_lock(shost->host_lock);
+	spin_unlock_irqrestore(ap->lock, irq_flags);
+
 	return rc;
 }
 
-DEF_SCSI_QCMD(ata_scsi_queuecmd)
-
 /**
  *	ata_scsi_simulate - simulate SCSI command on ATA device
  *	@dev: the target device

From 11e713a07e0c03e2202ad1e87cd91d45842ce3da Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 16 Nov 2010 18:39:19 +0000
Subject: [PATCH 0682/1066] ASoC: Fix register cache setup WM8994 for
 multi-component

During the multi-component conversion the WM8994 register cache init
got lost.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 sound/soc/codecs/wm8994.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 0db59c3aa5d4..830dfdd66c5f 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -3903,6 +3903,8 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
 		return -ENOMEM;
 	snd_soc_codec_set_drvdata(codec, wm8994);
 
+	codec->reg_cache = &wm8994->reg_cache;
+
 	wm8994->pdata = dev_get_platdata(codec->dev->parent);
 	wm8994->codec = codec;
 

From bedad0ca3fb2ba52c347b54a97b78d32e406dd96 Mon Sep 17 00:00:00 2001
From: Chris Paulson-Ellis <chris@edesix.com>
Date: Tue, 16 Nov 2010 12:27:09 +0000
Subject: [PATCH 0683/1066] ASoC: davinci: fixes for multi-component

Multi-component commit f0fba2ad broke a few things which this patch should
fix. Tested on the DM355 EVM. I've been as careful as I can, but it would be
good if those with access to other Davinci boards could test.

--

The multi-component commit put the initialisation of
snd_soc_dai.[capture|playback]_dma_data into snd_soc_dai_ops.hw_params of the
McBSP, McASP & VCIF drivers (davinci-i2s.c, davinci-mcasp.c & davinci-vcif.c).
The initialisation had to be moved from the probe function in these drivers
because davinci_*_dai changed from snd_soc_dai to snd_soc_dai_driver.

Unfortunately, the DMA params pointer is needed by davinci_pcm_open (in
davinci-pcm.c) before hw_params is called. I have moved the initialisation to
a new snd_soc_dai_ops.startup function in each of these drivers. This fix
indicates that all platforms that use davinci-pcm must have been broken and
need to test with this fix.

--

The multi-component commit also changed the McBSP driver name from
"davinci-asp" to "davinci-i2s" in davinci-i2s.c without updating the board
level references to the driver name. This change is understandable, as there
is a similarly named "davinci-mcasp" driver in davinci-mcasp.c.

There is probably no 'correct' name for this driver. The DM6446 datasheet
calls it the "ASP" and describes it as a "specialised McBSP". The DM355
datasheet calls it the "ASP" and describes it as a "specialised ASP". The
DM365 datasheet calls it the "McBSP". Rather than fix this problem by
reverting to "davinci-asp", I've elected to avoid future confusion with the
"davinci-mcasp" driver by changing it to "davinci-mcbsp", which is also
consistent with the names of the functions in the driver. There are other
fixes required, so it was never going to be as simple as a revert anyway.

--

The DM365 only has one McBSP port (of the McBSP platforms, only the DM355 has
2 ports), so I've changed the the id of the platform_device from 0 to -1.

--

In davinci-evm.c, the DM6446 EVM can no longer share a snd_soc_dai_link
structure with the DM355 EVM as they use different cpu DAI names (the DM355
has 2 ports and the EVM uses the second port, but the DM6446 only has 1 port).
This also means that the 2 boards need different snd_soc_card structures.

--

The codec_name entries in davinci-evm.c didn't match the i2c ids in the board
files. I have only checked and fixed the details of the names used for the
McBSP based platforms. Someone with a McASP based platform (eg DA8xx) should
check the others.

Signed-off-by: Chris Paulson-Ellis <chris@edesix.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-davinci/dm355.c      |  6 ++---
 arch/arm/mach-davinci/dm365.c      |  6 ++---
 arch/arm/mach-davinci/dm644x.c     |  4 +--
 sound/soc/davinci/davinci-evm.c    | 40 ++++++++++++++++++++++--------
 sound/soc/davinci/davinci-i2s.c    | 15 ++++++++---
 sound/soc/davinci/davinci-mcasp.c  | 13 +++++++---
 sound/soc/davinci/davinci-sffsdr.c |  2 +-
 sound/soc/davinci/davinci-vcif.c   | 13 +++++++---
 8 files changed, 69 insertions(+), 30 deletions(-)

diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 9be261beae7d..2652af124acd 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -359,8 +359,8 @@ static struct clk_lookup dm355_clks[] = {
 	CLK(NULL, "uart1", &uart1_clk),
 	CLK(NULL, "uart2", &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
-	CLK("davinci-asp.0", NULL, &asp0_clk),
-	CLK("davinci-asp.1", NULL, &asp1_clk),
+	CLK("davinci-mcbsp.0", NULL, &asp0_clk),
+	CLK("davinci-mcbsp.1", NULL, &asp1_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
 	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
 	CLK("spi_davinci.0", NULL, &spi0_clk),
@@ -664,7 +664,7 @@ static struct resource dm355_asp1_resources[] = {
 };
 
 static struct platform_device dm355_asp1_device = {
-	.name		= "davinci-asp",
+	.name		= "davinci-mcbsp",
 	.id		= 1,
 	.num_resources	= ARRAY_SIZE(dm355_asp1_resources),
 	.resource	= dm355_asp1_resources,
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index a12065e87266..c466d710d3c1 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -459,7 +459,7 @@ static struct clk_lookup dm365_clks[] = {
 	CLK(NULL, "usb", &usb_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK("davinci_voicecodec", NULL, &voicecodec_clk),
-	CLK("davinci-asp.0", NULL, &asp0_clk),
+	CLK("davinci-mcbsp", NULL, &asp0_clk),
 	CLK(NULL, "rto", &rto_clk),
 	CLK(NULL, "mjcp", &mjcp_clk),
 	CLK(NULL, NULL, NULL),
@@ -922,8 +922,8 @@ static struct resource dm365_asp_resources[] = {
 };
 
 static struct platform_device dm365_asp_device = {
-	.name		= "davinci-asp",
-	.id		= 0,
+	.name		= "davinci-mcbsp",
+	.id		= -1,
 	.num_resources	= ARRAY_SIZE(dm365_asp_resources),
 	.resource	= dm365_asp_resources,
 };
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 0608dd776a16..9a2376b3137c 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -302,7 +302,7 @@ static struct clk_lookup dm644x_clks[] = {
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("palm_bk3710", NULL, &ide_clk),
-	CLK("davinci-asp", NULL, &asp_clk),
+	CLK("davinci-mcbsp", NULL, &asp_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd_clk),
 	CLK(NULL, "spi", &spi_clk),
 	CLK(NULL, "gpio", &gpio_clk),
@@ -580,7 +580,7 @@ static struct resource dm644x_asp_resources[] = {
 };
 
 static struct platform_device dm644x_asp_device = {
-	.name		= "davinci-asp",
+	.name		= "davinci-mcbsp",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(dm644x_asp_resources),
 	.resource	= dm644x_asp_resources,
diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c
index 2b07b17a6b2d..bc9e6b0b3f6f 100644
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -157,12 +157,23 @@ static int evm_aic3x_init(struct snd_soc_pcm_runtime *rtd)
 }
 
 /* davinci-evm digital audio interface glue - connects codec <--> CPU */
-static struct snd_soc_dai_link evm_dai = {
+static struct snd_soc_dai_link dm6446_evm_dai = {
 	.name = "TLV320AIC3X",
 	.stream_name = "AIC3X",
-	.cpu_dai_name = "davinci-mcasp.0",
+	.cpu_dai_name = "davinci-mcbsp",
 	.codec_dai_name = "tlv320aic3x-hifi",
-	.codec_name = "tlv320aic3x-codec.0-001a",
+	.codec_name = "tlv320aic3x-codec.1-001b",
+	.platform_name = "davinci-pcm-audio",
+	.init = evm_aic3x_init,
+	.ops = &evm_ops,
+};
+
+static struct snd_soc_dai_link dm355_evm_dai = {
+	.name = "TLV320AIC3X",
+	.stream_name = "AIC3X",
+	.cpu_dai_name = "davinci-mcbsp.1",
+	.codec_dai_name = "tlv320aic3x-hifi",
+	.codec_name = "tlv320aic3x-codec.1-001b",
 	.platform_name = "davinci-pcm-audio",
 	.init = evm_aic3x_init,
 	.ops = &evm_ops,
@@ -172,10 +183,10 @@ static struct snd_soc_dai_link dm365_evm_dai = {
 #ifdef CONFIG_SND_DM365_AIC3X_CODEC
 	.name = "TLV320AIC3X",
 	.stream_name = "AIC3X",
-	.cpu_dai_name = "davinci-i2s",
+	.cpu_dai_name = "davinci-mcbsp",
 	.codec_dai_name = "tlv320aic3x-hifi",
 	.init = evm_aic3x_init,
-	.codec_name = "tlv320aic3x-codec.0-001a",
+	.codec_name = "tlv320aic3x-codec.1-0018",
 	.ops = &evm_ops,
 #elif defined(CONFIG_SND_DM365_VOICE_CODEC)
 	.name = "Voice Codec - CQ93VC",
@@ -219,10 +230,17 @@ static struct snd_soc_dai_link da8xx_evm_dai = {
 	.ops = &evm_ops,
 };
 
-/* davinci dm6446, dm355 evm audio machine driver */
-static struct snd_soc_card snd_soc_card_evm = {
-	.name = "DaVinci EVM",
-	.dai_link = &evm_dai,
+/* davinci dm6446 evm audio machine driver */
+static struct snd_soc_card dm6446_snd_soc_card_evm = {
+	.name = "DaVinci DM6446 EVM",
+	.dai_link = &dm6446_evm_dai,
+	.num_links = 1,
+};
+
+/* davinci dm355 evm audio machine driver */
+static struct snd_soc_card dm355_snd_soc_card_evm = {
+	.name = "DaVinci DM355 EVM",
+	.dai_link = &dm355_evm_dai,
 	.num_links = 1,
 };
 
@@ -261,10 +279,10 @@ static int __init evm_init(void)
 	int ret;
 
 	if (machine_is_davinci_evm()) {
-		evm_snd_dev_data = &snd_soc_card_evm;
+		evm_snd_dev_data = &dm6446_snd_soc_card_evm;
 		index = 0;
 	} else if (machine_is_davinci_dm355_evm()) {
-		evm_snd_dev_data = &snd_soc_card_evm;
+		evm_snd_dev_data = &dm355_snd_soc_card_evm;
 		index = 1;
 	} else if (machine_is_davinci_dm365_evm()) {
 		evm_snd_dev_data = &dm365_snd_soc_card_evm;
diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c
index d46b545d41f4..9e0e565e6ed9 100644
--- a/sound/soc/davinci/davinci-i2s.c
+++ b/sound/soc/davinci/davinci-i2s.c
@@ -426,9 +426,6 @@ static int davinci_i2s_hw_params(struct snd_pcm_substream *substream,
 	snd_pcm_format_t fmt;
 	unsigned element_cnt = 1;
 
-	dai->capture_dma_data = dev->dma_params;
-	dai->playback_dma_data = dev->dma_params;
-
 	/* general line settings */
 	spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
 	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
@@ -601,6 +598,15 @@ static int davinci_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
 	return ret;
 }
 
+static int davinci_i2s_startup(struct snd_pcm_substream *substream,
+			       struct snd_soc_dai *dai)
+{
+	struct davinci_mcbsp_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+	snd_soc_dai_set_dma_data(dai, substream, dev->dma_params);
+	return 0;
+}
+
 static void davinci_i2s_shutdown(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *dai)
 {
@@ -612,6 +618,7 @@ static void davinci_i2s_shutdown(struct snd_pcm_substream *substream,
 #define DAVINCI_I2S_RATES	SNDRV_PCM_RATE_8000_96000
 
 static struct snd_soc_dai_ops davinci_i2s_dai_ops = {
+	.startup	= davinci_i2s_startup,
 	.shutdown	= davinci_i2s_shutdown,
 	.prepare	= davinci_i2s_prepare,
 	.trigger	= davinci_i2s_trigger,
@@ -749,7 +756,7 @@ static struct platform_driver davinci_mcbsp_driver = {
 	.probe		= davinci_i2s_probe,
 	.remove		= davinci_i2s_remove,
 	.driver		= {
-		.name	= "davinci-i2s",
+		.name	= "davinci-mcbsp",
 		.owner	= THIS_MODULE,
 	},
 };
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 86918ee12419..fb55d2c5d704 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -715,9 +715,6 @@ static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream,
 	int word_length;
 	u8 fifo_level;
 
-	cpu_dai->capture_dma_data = dev->dma_params;
-	cpu_dai->playback_dma_data = dev->dma_params;
-
 	davinci_hw_common_param(dev, substream->stream);
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		fifo_level = dev->txnumevt;
@@ -799,7 +796,17 @@ static int davinci_mcasp_trigger(struct snd_pcm_substream *substream,
 	return ret;
 }
 
+static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
+				 struct snd_soc_dai *dai)
+{
+	struct davinci_audio_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+	snd_soc_dai_set_dma_data(dai, substream, dev->dma_params);
+	return 0;
+}
+
 static struct snd_soc_dai_ops davinci_mcasp_dai_ops = {
+	.startup	= davinci_mcasp_startup,
 	.trigger	= davinci_mcasp_trigger,
 	.hw_params	= davinci_mcasp_hw_params,
 	.set_fmt	= davinci_mcasp_set_dai_fmt,
diff --git a/sound/soc/davinci/davinci-sffsdr.c b/sound/soc/davinci/davinci-sffsdr.c
index 009b6521a1bf..6c6666a1f942 100644
--- a/sound/soc/davinci/davinci-sffsdr.c
+++ b/sound/soc/davinci/davinci-sffsdr.c
@@ -84,7 +84,7 @@ static struct snd_soc_ops sffsdr_ops = {
 static struct snd_soc_dai_link sffsdr_dai = {
 	.name = "PCM3008", /* Codec name */
 	.stream_name = "PCM3008 HiFi",
-	.cpu_dai_name = "davinci-asp.0",
+	.cpu_dai_name = "davinci-mcbsp",
 	.codec_dai_name = "pcm3008-hifi",
 	.codec_name = "pcm3008-codec",
 	.platform_name = "davinci-pcm-audio",
diff --git a/sound/soc/davinci/davinci-vcif.c b/sound/soc/davinci/davinci-vcif.c
index ea232f6a2c21..fb4cc1edf339 100644
--- a/sound/soc/davinci/davinci-vcif.c
+++ b/sound/soc/davinci/davinci-vcif.c
@@ -97,9 +97,6 @@ static int davinci_vcif_hw_params(struct snd_pcm_substream *substream,
 			&davinci_vcif_dev->dma_params[substream->stream];
 	u32 w;
 
-	dai->capture_dma_data = davinci_vcif_dev->dma_params;
-	dai->playback_dma_data = davinci_vcif_dev->dma_params;
-
 	/* Restart the codec before setup */
 	davinci_vcif_stop(substream);
 	davinci_vcif_start(substream);
@@ -174,9 +171,19 @@ static int davinci_vcif_trigger(struct snd_pcm_substream *substream, int cmd,
 	return ret;
 }
 
+static int davinci_vcif_startup(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct davinci_vcif_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+	snd_soc_dai_set_dma_data(dai, substream, dev->dma_params);
+	return 0;
+}
+
 #define DAVINCI_VCIF_RATES	SNDRV_PCM_RATE_8000_48000
 
 static struct snd_soc_dai_ops davinci_vcif_dai_ops = {
+	.startup	= davinci_vcif_startup,
 	.trigger	= davinci_vcif_trigger,
 	.hw_params	= davinci_vcif_hw_params,
 };

From 85e76ab50aecbdc9011806f2f8943450ccb0d93c Mon Sep 17 00:00:00 2001
From: Jovi Zhang <bookjovi@gmail.com>
Date: Wed, 10 Nov 2010 07:22:18 -0600
Subject: [PATCH 0684/1066] kdb: fix memory leak in kdb_main.c

Call kfree in the error path as well as the success path in kdb_ll().

Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
 kernel/debug/kdb/kdb_main.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index 37755d621924..3ab3feee7840 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -2361,7 +2361,7 @@ static int kdb_pid(int argc, const char **argv)
  */
 static int kdb_ll(int argc, const char **argv)
 {
-	int diag;
+	int diag = 0;
 	unsigned long addr;
 	long offset = 0;
 	unsigned long va;
@@ -2400,20 +2400,21 @@ static int kdb_ll(int argc, const char **argv)
 		char buf[80];
 
 		if (KDB_FLAG(CMD_INTERRUPT))
-			return 0;
+			goto out;
 
 		sprintf(buf, "%s " kdb_machreg_fmt "\n", command, va);
 		diag = kdb_parse(buf);
 		if (diag)
-			return diag;
+			goto out;
 
 		addr = va + linkoffset;
 		if (kdb_getword(&va, addr, sizeof(va)))
-			return 0;
+			goto out;
 	}
-	kfree(command);
 
-	return 0;
+out:
+	kfree(command);
+	return diag;
 }
 
 static int kdb_kgdb(int argc, const char **argv)

From 5450d904054b4ed582793ad6ecb5469f03cc4c46 Mon Sep 17 00:00:00 2001
From: Jovi Zhang <bookjovi@gmail.com>
Date: Wed, 10 Nov 2010 07:22:18 -0600
Subject: [PATCH 0685/1066] kdb: fix crash when KDB_BASE_CMD_MAX is exceeded

When the number of dyanmic kdb commands exceeds KDB_BASE_CMD_MAX, the
kernel will fault.

Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
 kernel/debug/kdb/kdb_main.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index 3ab3feee7840..a6e729766821 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -82,7 +82,7 @@ static kdbtab_t kdb_base_commands[50];
 #define for_each_kdbcmd(cmd, num)					\
 	for ((cmd) = kdb_base_commands, (num) = 0;			\
 	     num < kdb_max_commands;					\
-	     num == KDB_BASE_CMD_MAX ? cmd = kdb_commands : cmd++, num++)
+	     num++, num == KDB_BASE_CMD_MAX ? cmd = kdb_commands : cmd++)
 
 typedef struct _kdbmsg {
 	int	km_diag;	/* kdb diagnostic */
@@ -646,7 +646,7 @@ static int kdb_defcmd2(const char *cmdstr, const char *argv0)
 	}
 	if (!s->usable)
 		return KDB_NOTIMP;
-	s->command = kmalloc((s->count + 1) * sizeof(*(s->command)), GFP_KDB);
+	s->command = kzalloc((s->count + 1) * sizeof(*(s->command)), GFP_KDB);
 	if (!s->command) {
 		kdb_printf("Could not allocate new kdb_defcmd table for %s\n",
 			   cmdstr);
@@ -2740,13 +2740,13 @@ int kdb_register_repeat(char *cmd,
 		}
 		if (kdb_commands) {
 			memcpy(new, kdb_commands,
-			       kdb_max_commands * sizeof(*new));
+			  (kdb_max_commands - KDB_BASE_CMD_MAX) * sizeof(*new));
 			kfree(kdb_commands);
 		}
 		memset(new + kdb_max_commands, 0,
 		       kdb_command_extend * sizeof(*new));
 		kdb_commands = new;
-		kp = kdb_commands + kdb_max_commands;
+		kp = kdb_commands + kdb_max_commands - KDB_BASE_CMD_MAX;
 		kdb_max_commands += kdb_command_extend;
 	}
 

From 10a6e67648d4b47769953bd24759ba9609bf00df Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Mon, 15 Nov 2010 08:07:35 -0600
Subject: [PATCH 0686/1066] kgdb,x86: fix regression in detach handling

The fix from ba773f7c510c0b252145933926c636c439889207
(x86,kgdb: Fix hw breakpoint regression) was not entirely complete.

The kgdb_remove_all_hw_break() function also needs to call the
hw_break_release_slot() or else a breakpoint can get activated again
after the debugger has detached.

The kgdb test suite exposes the behavior in the form of either a hang
or repetitive failure.  The kernel config that exposes the problem
contains all of the following:

CONFIG_DEBUG_RODATA=y
CONFIG_KGDB_TESTS=y
CONFIG_KGDB_TESTS_ON_BOOT=y
CONFIG_KGDB_TESTS_BOOT_STRING="V1F100"

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Tested-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/kgdb.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index ec592caac4b4..cd21b654dec6 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -315,14 +315,18 @@ static void kgdb_remove_all_hw_break(void)
 		if (!breakinfo[i].enabled)
 			continue;
 		bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
-		if (bp->attr.disabled == 1)
+		if (!bp->attr.disabled) {
+			arch_uninstall_hw_breakpoint(bp);
+			bp->attr.disabled = 1;
 			continue;
+		}
 		if (dbg_is_early)
 			early_dr7 &= ~encode_dr7(i, breakinfo[i].len,
 						 breakinfo[i].type);
-		else
-			arch_uninstall_hw_breakpoint(bp);
-		bp->attr.disabled = 1;
+		else if (hw_break_release_slot(i))
+			printk(KERN_ERR "KGDB: hw bpt remove failed %lx\n",
+			       breakinfo[i].addr);
+		breakinfo[i].enabled = 0;
 	}
 }
 

From e3839ed8e89e79202c0402ac46965c0686897890 Mon Sep 17 00:00:00 2001
From: Dongdong Deng <dongdong.deng@windriver.com>
Date: Tue, 16 Nov 2010 16:02:00 -0600
Subject: [PATCH 0687/1066] kgdb,ppc: Fix regression in evr register handling

Commit ff10b88b5a05c8f1646dd15fb9f6093c1384ff6d (kgdb,ppc: Individual
register get/set for ppc) introduced a problem where memcpy was used
incorrectly to read and write the evr registers with a kernel that
has:

CONFIG_FSL_BOOKE=y
CONFIG_SPE=y
CONFIG_KGDB=y

This patch also fixes the following compilation problems:

arch/powerpc/kernel/kgdb.c: In function 'dbg_get_reg':
arch/powerpc/kernel/kgdb.c:341: error: passing argument 2 of 'memcpy' makes pointer from integer without a cast
arch/powerpc/kernel/kgdb.c: In function 'dbg_set_reg':
arch/powerpc/kernel/kgdb.c:366: error: passing argument 1 of 'memcpy' makes pointer from integer without a cast

[jason.wessel@windriver.com: Remove void * casts and fix patch header]
Reported-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
CC: linuxppc-dev@lists.ozlabs.org
---
 arch/powerpc/kernel/kgdb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index 7a9db64f3f04..42850ee00ada 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -337,7 +337,7 @@ char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
 		/* FP registers 32 -> 63 */
 #if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_SPE)
 		if (current)
-			memcpy(mem, current->thread.evr[regno-32],
+			memcpy(mem, &current->thread.evr[regno-32],
 					dbg_reg_def[regno].size);
 #else
 		/* fp registers not used by kernel, leave zero */
@@ -362,7 +362,7 @@ int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
 	if (regno >= 32 && regno < 64) {
 		/* FP registers 32 -> 63 */
 #if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_SPE)
-		memcpy(current->thread.evr[regno-32], mem,
+		memcpy(&current->thread.evr[regno-32], mem,
 				dbg_reg_def[regno].size);
 #else
 		/* fp registers not used by kernel, leave zero */

From 218854af84038d828a32f061858b1902ed2beec6 Mon Sep 17 00:00:00 2001
From: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Wed, 17 Nov 2010 06:37:16 +0000
Subject: [PATCH 0688/1066] rds: Integer overflow in RDS cmsg handling

In rds_cmsg_rdma_args(), the user-provided args->nr_local value is
restricted to less than UINT_MAX.  This seems to need a tighter upper
bound, since the calculation of total iov_size can overflow, resulting
in a small sock_kmalloc() allocation.  This would probably just result
in walking off the heap and crashing when calling rds_rdma_pages() with
a high count value.  If it somehow doesn't crash here, then memory
corruption could occur soon after.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/rds/rdma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/rds/rdma.c b/net/rds/rdma.c
index 8920f2a83327..4e37c1cbe8b2 100644
--- a/net/rds/rdma.c
+++ b/net/rds/rdma.c
@@ -567,7 +567,7 @@ int rds_cmsg_rdma_args(struct rds_sock *rs, struct rds_message *rm,
 		goto out;
 	}
 
-	if (args->nr_local > (u64)UINT_MAX) {
+	if (args->nr_local > UIO_MAXIOV) {
 		ret = -EMSGSIZE;
 		goto out;
 	}

From d5d3ebe3be5c5123f2d444e186717f45284151e2 Mon Sep 17 00:00:00 2001
From: Shan Wei <shanwei@cn.fujitsu.com>
Date: Fri, 12 Nov 2010 00:15:25 +0000
Subject: [PATCH 0689/1066] r8169: fix checksum broken

If r8196 received packets with invalid sctp/igmp(not tcp, udp) checksum, r8196 set skb->ip_summed
wit CHECKSUM_UNNECESSARY. This cause that upper protocol don't check checksum field.

I am not family with r8196 driver. I try to guess the meaning of RxProtoIP and IPFail.
RxProtoIP stands for received IPv4 packet that upper protocol is not tcp and udp.
!(opts1 & IPFail) is true means that driver correctly to check checksum in IPv4 header.

If it's right, I think we should not set ip_summed wit CHECKSUM_UNNECESSARY for my sctp packets
with invalid checksum.

If it's not right, please tell me.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/r8169.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 4c4d16905efb..7d33ef4bcb4a 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -4440,8 +4440,7 @@ static inline void rtl8169_rx_csum(struct sk_buff *skb, u32 opts1)
 	u32 status = opts1 & RxProtoMask;
 
 	if (((status == RxProtoTCP) && !(opts1 & TCPFail)) ||
-	    ((status == RxProtoUDP) && !(opts1 & UDPFail)) ||
-	    ((status == RxProtoIP) && !(opts1 & IPFail)))
+	    ((status == RxProtoUDP) && !(opts1 & UDPFail)))
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 	else
 		skb_checksum_none_assert(skb);

From 24b7ea9f6c9787fad885442ed0cc010f1aa69cca Mon Sep 17 00:00:00 2001
From: Shan Wei <shanwei@cn.fujitsu.com>
Date: Wed, 17 Nov 2010 11:55:08 -0800
Subject: [PATCH 0690/1066] 8139cp: fix checksum broken

I am not family with RealTek RTL-8139C+ series 10/100 PCI Ethernet driver.
I try to guess the meaning of RxProtoIP and IPFail.
RxProtoIP stands for received IPv4 packet that upper protocol is not tcp and udp.
!(status & IPFail) is true means that driver correctly to check checksum in IPv4 header.

If these are right, driver will set ip_summed with CHECKSUM_UNNECESSARY for other
upper protocol, e.g. sctp, igmp protocol. This will cause protocol stack ignores
checksum check for packets with invalid checksum.

This patch is only compile-test.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/8139cp.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index ac422cd332ea..dd16e83933a2 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -490,13 +490,11 @@ static inline unsigned int cp_rx_csum_ok (u32 status)
 {
 	unsigned int protocol = (status >> 16) & 0x3;
 
-	if (likely((protocol == RxProtoTCP) && (!(status & TCPFail))))
+	if (((protocol == RxProtoTCP) && !(status & TCPFail)) ||
+	    ((protocol == RxProtoUDP) && !(status & UDPFail)))
 		return 1;
-	else if ((protocol == RxProtoUDP) && (!(status & UDPFail)))
-		return 1;
-	else if ((protocol == RxProtoIP) && (!(status & IPFail)))
-		return 1;
-	return 0;
+	else
+		return 0;
 }
 
 static int cp_rx_poll(struct napi_struct *napi, int budget)

From 870634b0b641271acb2e22df06ddda0c794b89a3 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segoon@openwall.com>
Date: Sun, 14 Nov 2010 10:08:34 +0000
Subject: [PATCH 0691/1066] net: bnx2x: fix error value sign

bnx2x_init_one() should return negative value on error.
By mistake it returns ENODEV instead of -ENODEV.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x/bnx2x_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index e9ad16f00b56..9709b8569666 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -9064,7 +9064,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 	default:
 		pr_err("Unknown board_type (%ld), aborting\n",
 			   ent->driver_data);
-		return ENODEV;
+		return -ENODEV;
 	}
 
 	cid_count += CNIC_CONTEXT_USE;

From 28cb6ccd2c7e86b3a4db94c7062cd27937bed424 Mon Sep 17 00:00:00 2001
From: Nicolas Kaiser <nikai@nikai.net>
Date: Mon, 15 Nov 2010 10:59:42 +0000
Subject: [PATCH 0692/1066] gianfar: fix signedness issue

irq_of_parse_and_map() has an unsigned return type.
Testing for a negative error value doesn't work here.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/gianfar.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 49e4ce1246a7..d1bec6269173 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -577,11 +577,10 @@ static int gfar_parse_group(struct device_node *np,
 			irq_of_parse_and_map(np, 1);
 		priv->gfargrp[priv->num_grps].interruptError =
 			irq_of_parse_and_map(np,2);
-		if (priv->gfargrp[priv->num_grps].interruptTransmit < 0 ||
-			priv->gfargrp[priv->num_grps].interruptReceive < 0 ||
-			priv->gfargrp[priv->num_grps].interruptError < 0) {
+		if (priv->gfargrp[priv->num_grps].interruptTransmit == NO_IRQ ||
+		    priv->gfargrp[priv->num_grps].interruptReceive  == NO_IRQ ||
+		    priv->gfargrp[priv->num_grps].interruptError    == NO_IRQ)
 			return -EINVAL;
-		}
 	}
 
 	priv->gfargrp[priv->num_grps].grp_id = priv->num_grps;

From 0a77fe4c188e25917799f2356d4aa5e6d80c39a2 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 19 Oct 2010 18:48:35 +0200
Subject: [PATCH 0693/1066] KVM: Correct ordering of ldt reload wrt fs/gs
 reload

If fs or gs refer to the ldt, they must be reloaded after the ldt.  Reorder
the code to that effect.

Userspace code that uses the ldt with kvm is nonexistent, so this doesn't fix
a user-visible bug.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/svm.c | 2 +-
 arch/x86/kvm/vmx.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 82e144a4e514..1ca12298ffc7 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -3395,6 +3395,7 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 	vcpu->arch.regs[VCPU_REGS_RIP] = svm->vmcb->save.rip;
 
 	load_host_msrs(vcpu);
+	kvm_load_ldt(ldt_selector);
 	loadsegment(fs, fs_selector);
 #ifdef CONFIG_X86_64
 	load_gs_index(gs_selector);
@@ -3402,7 +3403,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 #else
 	loadsegment(gs, gs_selector);
 #endif
-	kvm_load_ldt(ldt_selector);
 
 	reload_tss(vcpu);
 
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 8da0e45ff7c9..6fe7df75bfd4 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -839,8 +839,6 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx)
 
 	++vmx->vcpu.stat.host_state_reload;
 	vmx->host_state.loaded = 0;
-	if (vmx->host_state.fs_reload_needed)
-		loadsegment(fs, vmx->host_state.fs_sel);
 	if (vmx->host_state.gs_ldt_reload_needed) {
 		kvm_load_ldt(vmx->host_state.ldt_sel);
 #ifdef CONFIG_X86_64
@@ -850,6 +848,8 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx)
 		loadsegment(gs, vmx->host_state.gs_sel);
 #endif
 	}
+	if (vmx->host_state.fs_reload_needed)
+		loadsegment(fs, vmx->host_state.fs_sel);
 	reload_tss();
 #ifdef CONFIG_X86_64
 	if (is_long_mode(&vmx->vcpu)) {

From c8770e7ba63bb5dd8fe5f9d251275a8fa717fb78 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Thu, 11 Nov 2010 12:37:26 +0200
Subject: [PATCH 0694/1066] KVM: VMX: Fix host userspace gsbase corruption

We now use load_gs_index() to load gs safely; unfortunately this also
changes MSR_KERNEL_GS_BASE, which we managed separately.  This resulted
in confusion and breakage running 32-bit host userspace on a 64-bit kernel.

Fix by
- saving guest MSR_KERNEL_GS_BASE before we we reload the host's gs
- doing the host save/load unconditionally, instead of only when in guest
  long mode

Things can be cleaned up further, but this is the minmal fix for now.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/vmx.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 6fe7df75bfd4..ff21fdda0c53 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -821,10 +821,9 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu)
 #endif
 
 #ifdef CONFIG_X86_64
-	if (is_long_mode(&vmx->vcpu)) {
-		rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
+	rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
+	if (is_long_mode(&vmx->vcpu))
 		wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
-	}
 #endif
 	for (i = 0; i < vmx->save_nmsrs; ++i)
 		kvm_set_shared_msr(vmx->guest_msrs[i].index,
@@ -839,11 +838,14 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx)
 
 	++vmx->vcpu.stat.host_state_reload;
 	vmx->host_state.loaded = 0;
+#ifdef CONFIG_X86_64
+	if (is_long_mode(&vmx->vcpu))
+		rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
+#endif
 	if (vmx->host_state.gs_ldt_reload_needed) {
 		kvm_load_ldt(vmx->host_state.ldt_sel);
 #ifdef CONFIG_X86_64
 		load_gs_index(vmx->host_state.gs_sel);
-		wrmsrl(MSR_KERNEL_GS_BASE, current->thread.gs);
 #else
 		loadsegment(gs, vmx->host_state.gs_sel);
 #endif
@@ -852,10 +854,7 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx)
 		loadsegment(fs, vmx->host_state.fs_sel);
 	reload_tss();
 #ifdef CONFIG_X86_64
-	if (is_long_mode(&vmx->vcpu)) {
-		rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
-		wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
-	}
+	wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
 #endif
 	if (current_thread_info()->status & TS_USEDFPU)
 		clts();

From 7957f0a857754c555e07f58a3fb83ac29501478c Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed, 17 Nov 2010 14:58:36 -0800
Subject: [PATCH 0695/1066] Fix build failure due to hwirq.h needing smp_lock.h

Arnd Bergmann did an automated scripting run to find left-over instances
of <linux/smp_lock.h>, and had made it trigger it on the normal BKL use
of lock_kernel and unlock_lernel (and apparently release_kernel_lock and
reacquire_kernel_lock too, used by the scheduler).

That resulted in commit 451a3c24b013 ("BKL: remove extraneous #include
<smp_lock.h>").

However, hardirq.h was the only remaining user of the old
'kernel_locked()' interface, and Arnd's script hadn't checked for that.
So depending on your configuration and what header files had been
included, you would get errors like "implicit declaration of function
'kernel_locked'" during the build.

The right fix is not to just re-instate the smp_lock.h include - it is
to just remove 'kernel_locked()' entirely, since the only use was this
one special low-level detail.  Just make hardirq.h do it directly.

In fact this simplifies and clarifies the code, because some trivial
analysis makes it clear that hardirq.h only ever used _one_ of the two
definitions of kernel_locked(), so we can remove the other one entirely.

Reported-by: Zimny Lech <napohybelskurwysynom2010@gmail.com>
Reported-and-acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/hardirq.h  | 2 +-
 include/linux/smp_lock.h | 3 ---
 2 files changed, 1 insertion(+), 4 deletions(-)

diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 8f3f467c57c6..bea1612d8f5c 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -96,7 +96,7 @@
 #define in_nmi()	(preempt_count() & NMI_MASK)
 
 #if defined(CONFIG_PREEMPT) && defined(CONFIG_BKL)
-# define PREEMPT_INATOMIC_BASE kernel_locked()
+# define PREEMPT_INATOMIC_BASE (current->lock_depth >= 0)
 #else
 # define PREEMPT_INATOMIC_BASE 0
 #endif
diff --git a/include/linux/smp_lock.h b/include/linux/smp_lock.h
index 291f721144c2..3a1988202731 100644
--- a/include/linux/smp_lock.h
+++ b/include/linux/smp_lock.h
@@ -4,8 +4,6 @@
 #ifdef CONFIG_LOCK_KERNEL
 #include <linux/sched.h>
 
-#define kernel_locked()		(current->lock_depth >= 0)
-
 extern int __lockfunc __reacquire_kernel_lock(void);
 extern void __lockfunc __release_kernel_lock(void);
 
@@ -58,7 +56,6 @@ static inline void cycle_kernel_lock(void)
 #define lock_kernel()
 #define unlock_kernel()
 #define cycle_kernel_lock()			do { } while(0)
-#define kernel_locked()				1
 #endif /* CONFIG_BKL */
 
 #define release_kernel_lock(task)		do { } while(0)

From 0a5b871ea4c6bfb2723ac2ffc7ef5c32452abb89 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed, 17 Nov 2010 18:36:25 -0800
Subject: [PATCH 0696/1066] hardirq.h: remove now-empty #ifdef/#endif pair

Commit 451a3c24b013 ("BKL: remove extraneous #include <smp_lock.h>")
removed the #include line that was the only thing that was surrounded by
the #ifdef/#endif.

So now that #ifdef is guarding nothing at all. Just remove it.

Reported-by: Byeong-ryeol Kim <brofkims@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/hardirq.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index bea1612d8f5c..714da7e5d10c 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -2,8 +2,6 @@
 #define LINUX_HARDIRQ_H
 
 #include <linux/preempt.h>
-#ifdef CONFIG_PREEMPT
-#endif
 #include <linux/lockdep.h>
 #include <linux/ftrace_irq.h>
 #include <asm/hardirq.h>

From 08da1193d2c8c7a25d0cef7f85d0b9f1ad7c583a Mon Sep 17 00:00:00 2001
From: Markus Trippelsdorf <markus@trippelsdorf.de>
Date: Wed, 17 Nov 2010 21:46:06 -0500
Subject: [PATCH 0697/1066] ext4: fix setting random pages PageUptodate

ext4_end_bio calls put_page and kmem_cache_free before calling
SetPageUpdate(). This can result in setting the PageUptodate bit on
random pages and causes the following BUG:

 BUG: Bad page state in process rm  pfn:52e54
 page:ffffea0001222260 count:0 mapcount:0 mapping:          (null) index:0x0
 arch kernel: page flags: 0x4000000000000008(uptodate)

Fix the problem by moving put_io_page() after the SetPageUpdate() call.

Thanks to Hugh Dickins for analyzing this problem.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/page-io.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c
index 7f5451cd1d38..beacce11ac50 100644
--- a/fs/ext4/page-io.c
+++ b/fs/ext4/page-io.c
@@ -237,8 +237,6 @@ static void ext4_end_bio(struct bio *bio, int error)
 			} while (bh != head);
 		}
 
-		put_io_page(io_end->pages[i]);
-
 		/*
 		 * If this is a partial write which happened to make
 		 * all buffers uptodate then we can optimize away a
@@ -248,6 +246,8 @@ static void ext4_end_bio(struct bio *bio, int error)
 		 */
 		if (!partial_write)
 			SetPageUptodate(page);
+
+		put_io_page(io_end->pages[i]);
 	}
 	io_end->num_io_pages = 0;
 	inode = io_end->inode;

From f4c8cc652d9f70680dd91be60a7a455040d0a282 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Wed, 17 Nov 2010 21:46:25 -0500
Subject: [PATCH 0698/1066] ext4: missing unlock in ext4_clear_request_list()

If the the li_request_list was empty then it returned with the lock
held.  Instead of adding a "goto unlock" I just removed that special
case and let it go past the empty list_for_each_safe().

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/super.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 61182fe6254e..ef09d1443d1a 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -2799,9 +2799,6 @@ static void ext4_clear_request_list(void)
 	struct ext4_li_request *elr;
 
 	mutex_lock(&ext4_li_info->li_list_mtx);
-	if (list_empty(&ext4_li_info->li_request_list))
-		return;
-
 	list_for_each_safe(pos, n, &ext4_li_info->li_request_list) {
 		elr = list_entry(pos, struct ext4_li_request,
 				 lr_request);

From 0587aa3d11f9769a301b21bff2c3ed8365606b8d Mon Sep 17 00:00:00 2001
From: yangsheng <sheng.yang@oracle.com>
Date: Wed, 17 Nov 2010 21:46:26 -0500
Subject: [PATCH 0699/1066] jbd2: fix /proc/fs/jbd2/<dev> when using an
 external journal

In jbd2_journal_init_dev(), we need make sure the journal structure is
fully initialzied before calling jbd2_stats_proc_init().

Reviewed-by: Andreas Dilger <andreas.dilger@oracle.com>
Signed-off-by: yangsheng <sheng.yang@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/jbd2/journal.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index c590d155c095..f837ba953529 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -899,6 +899,14 @@ journal_t * jbd2_journal_init_dev(struct block_device *bdev,
 
 	/* journal descriptor can store up to n blocks -bzzz */
 	journal->j_blocksize = blocksize;
+	journal->j_dev = bdev;
+	journal->j_fs_dev = fs_dev;
+	journal->j_blk_offset = start;
+	journal->j_maxlen = len;
+	bdevname(journal->j_dev, journal->j_devname);
+	p = journal->j_devname;
+	while ((p = strchr(p, '/')))
+		*p = '!';
 	jbd2_stats_proc_init(journal);
 	n = journal->j_blocksize / sizeof(journal_block_tag_t);
 	journal->j_wbufsize = n;
@@ -908,14 +916,6 @@ journal_t * jbd2_journal_init_dev(struct block_device *bdev,
 			__func__);
 		goto out_err;
 	}
-	journal->j_dev = bdev;
-	journal->j_fs_dev = fs_dev;
-	journal->j_blk_offset = start;
-	journal->j_maxlen = len;
-	bdevname(journal->j_dev, journal->j_devname);
-	p = journal->j_devname;
-	while ((p = strchr(p, '/')))
-		*p = '!';
 
 	bh = __getblk(journal->j_dev, start, journal->j_blocksize);
 	if (!bh) {

From b432b4b3440a34c1430fcd66bab783640724bd28 Mon Sep 17 00:00:00 2001
From: kishore kadiyala <kishore.kadiyala@ti.com>
Date: Wed, 17 Nov 2010 22:35:32 -0500
Subject: [PATCH 0700/1066] mmc: omap4: hsmmc: Fix improper card detection
 while booting

While booting OMAP4 ES2.0 boards, cards on MMC1 and MMC2 controllers
are not getting detected sometimes.

During reset of command/data line, wrong pointer to base address
was passed while read operation to SYSCTL register, thus impacting
the updated reset logic.

Passing the correct base address fixes the issue.

Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 drivers/mmc/host/omap_hsmmc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 82a1079bbdc7..5d46021cbb57 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1002,7 +1002,7 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host,
 	 * Monitor a 0->1 transition first
 	 */
 	if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) {
-		while ((!(OMAP_HSMMC_READ(host, SYSCTL) & bit))
+		while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
 					&& (i++ < limit))
 			cpu_relax();
 	}

From acbfd58e8a1f24ef644a90a90825c3f435b990f5 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 18 Nov 2010 14:39:24 +1100
Subject: [PATCH 0701/1066] powerpc: Fix div64 in bootloader

The code is missing a fix that went into the main kernel variant
(we should try to share that code again at some stage)

Reported-by: Albert Cahalan <acahalan@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/div64.S | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/div64.S b/arch/powerpc/boot/div64.S
index 722f360a32a9..d271ab542673 100644
--- a/arch/powerpc/boot/div64.S
+++ b/arch/powerpc/boot/div64.S
@@ -33,9 +33,10 @@ __div64_32:
 	cntlzw	r0,r5		# we are shifting the dividend right
 	li	r10,-1		# to make it < 2^32, and shifting
 	srw	r10,r10,r0	# the divisor right the same amount,
-	add	r9,r4,r10	# rounding up (so the estimate cannot
+	addc	r9,r4,r10	# rounding up (so the estimate cannot
 	andc	r11,r6,r10	# ever be too large, only too small)
 	andc	r9,r9,r10
+	addze	r9,r9
 	or	r11,r5,r11
 	rotlw	r9,r9,r0
 	rotlw	r11,r11,r0

From 01cf6fe8553b0ac649f3323d8da69b51cad8c468 Mon Sep 17 00:00:00 2001
From: Nishanth Aravamudan <nacc@us.ibm.com>
Date: Thu, 14 Oct 2010 14:48:52 +0000
Subject: [PATCH 0702/1066] powerpc/pseries: Don't override
 CONFIG_PPC_PSERIES_DEBUG

EEH and pci_dlpar #undef DEBUG, but I think they were added before the
ability to control this from Kconfig. It's really annoying to only get
some of the debug messages from these files. Leave the lpar.c #undef
alone as it produces so much output as to make the kernel unusable.
Update the Kconfig text to indicate this particular quirk :)

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pseries/Kconfig     | 6 ++++++
 arch/powerpc/platforms/pseries/eeh.c       | 2 --
 arch/powerpc/platforms/pseries/pci_dlpar.c | 2 --
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index c667f0f02c34..3139814f6439 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -47,6 +47,12 @@ config LPARCFG
 config PPC_PSERIES_DEBUG
 	depends on PPC_PSERIES && PPC_EARLY_DEBUG
 	bool "Enable extra debug logging in platforms/pseries"
+        help
+	  Say Y here if you want the pseries core to produce a bunch of
+	  debug messages to the system log. Select this if you are having a
+	  problem with the pseries core and want to see more of what is
+	  going on. This does not enable debugging in lpar.c, which must
+	  be manually done due to its verbosity.
 	default y
 
 config PPC_SMLPAR
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 34b7dc12e731..17a11c82e6f8 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -21,8 +21,6 @@
  * Please address comments and feedback to Linas Vepstas <linas@austin.ibm.com>
  */
 
-#undef DEBUG
-
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/list.h>
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 4b7a062dee15..5fcc92a12d3e 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -25,8 +25,6 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#undef DEBUG
-
 #include <linux/pci.h>
 #include <asm/pci-bridge.h>
 #include <asm/ppc-pci.h>

From 4a89261b02d421cc1bcadaaebb90bb7919db0854 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 10 Nov 2010 12:29:49 +0000
Subject: [PATCH 0703/1066] powerpc/mm: Fix build error in
 setup_initial_memory_limit

arch/powerpc/mm/tlb_nohash.c: In function 'setup_initial_memory_limit':
arch/powerpc/mm/tlb_nohash.c:588:29: error: 'ppc64_memblock_base' undeclared (first use in this function)
arch/powerpc/mm/tlb_nohash.c:588:29: note: each undeclared identifier is reported only once for each function it appears in

Due to a copy/paste typo with the following commit:

	commit cd3db0c4ca3d237e7ad20f7107216e575705d2b0
	Author: Benjamin Herrenschmidt <benh@kernel.crashing.org>
	Date:   Tue Jul 6 15:39:02 2010 -0700

	    memblock: Remove rmo_size, burry it in arch/powerpc where it belongs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/tlb_nohash.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 36c0c449a899..2a030d89bbc6 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -585,6 +585,6 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 	ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000);
 
 	/* Finally limit subsequent allocations */
-	memblock_set_current_limit(ppc64_memblock_base + ppc64_rma_size);
+	memblock_set_current_limit(first_memblock_base + ppc64_rma_size);
 }
 #endif /* CONFIG_PPC64 */

From 234a71a7d64832e4aa8d9b5c80133480b86f6de3 Mon Sep 17 00:00:00 2001
From: kerstin jonsson <kerstin.jonsson@ericsson.com>
Date: Fri, 22 Oct 2010 00:17:55 +0000
Subject: [PATCH 0704/1066] powerpc: Set CONFIG_32BIT on ppc32

commit ffe8018c3424892c9590048fc36caa6c3e0c8a76 of the -mm tree
fixes the initramfs size calculation for e.g. s390 but breaks it
for 32bit architectures which do not define CONFIG_32BIT.

This patch fix the problem for PPC32 which will elsewise end up
with a __initramfs_size of 0.

Signed-off-by: Kerstin Jonsson <kerstin.jonsson@ericsson.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b6447190e1a2..e625e9e034ae 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -4,6 +4,10 @@ config PPC32
 	bool
 	default y if !PPC64
 
+config 32BIT
+	bool
+	default y if PPC32
+
 config 64BIT
 	bool
 	default y if PPC64

From 1c2c25c78740b2796c7c06640784cb6732fa4907 Mon Sep 17 00:00:00 2001
From: Michael Neuling <mikey@neuling.org>
Date: Wed, 17 Nov 2010 16:32:59 +0000
Subject: [PATCH 0705/1066] powerpc: Fix call to subpage_protection()

In:
  powerpc/mm: Fix pgtable cache cleanup with CONFIG_PPC_SUBPAGE_PROT
  commit d28513bc7f675d28b479db666d572e078ecf182d
  Author: David Gibson <david@gibson.dropbear.id.au>

subpage_protection() was changed to to take an mm rather a pgdir but it
didn't change calling site in hashpage_preload().  The change wasn't
noticed at compile time since hashpage_preload() used a void* as the
parameter to subpage_protection().

This is obviously wrong and can trigger the following crash when
CONFIG_SLAB, CONFIG_DEBUG_SLAB, CONFIG_PPC_64K_PAGES
CONFIG_PPC_SUBPAGE_PROT are enabled.

Freeing unused kernel memory: 704k freed
Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6c49b7
Faulting instruction address: 0xc0000000000410f4
cpu 0x2: Vector: 300 (Data Access) at [c00000004233f590]
    pc: c0000000000410f4: .hash_preload+0x258/0x338
    lr: c000000000041054: .hash_preload+0x1b8/0x338
    sp: c00000004233f810
   msr: 8000000000009032
   dar: 6b6b6b6b6b6c49b7
 dsisr: 40000000
  current = 0xc00000007e2c0070
  paca    = 0xc000000007fe0500
    pid   = 1, comm = init
enter ? for help
[c00000004233f810] c000000000041020 .hash_preload+0x184/0x338 (unreliable)
[c00000004233f8f0] c00000000003ed98 .update_mmu_cache+0xb0/0xd0
[c00000004233f990] c000000000157754 .__do_fault+0x48c/0x5dc
[c00000004233faa0] c000000000158fd0 .handle_mm_fault+0x508/0xa8c
[c00000004233fb90] c0000000006acdd4 .do_page_fault+0x428/0x6ac
[c00000004233fe30] c000000000005260 handle_page_fault+0x20/0x74

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/hash_utils_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 83f534d862db..5e9584405c45 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -1123,7 +1123,7 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 	else
 #endif /* CONFIG_PPC_HAS_HASH_64K */
 		rc = __hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
-				    subpage_protection(pgdir, ea));
+				    subpage_protection(mm, ea));
 
 	/* Dump some info in case of hash insertion failure, they should
 	 * never happen so it is really useful to know if/when they do

From 82ae5eaffad40a6d4738e8a57e48dd0d903a9ef0 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 17 Nov 2010 07:20:32 +0000
Subject: [PATCH 0706/1066] powerpc/mm: Fix module instruction tlb fault
 handling on Book-E 64

We were seeing oops like the following when we did an rmmod on a module:

Unable to handle kernel paging request for instruction fetch
Faulting instruction address: 0x8000000000008010
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=2 P5020 DS
last sysfs file: /sys/devices/qman-portals.2/qman-pool.9/uevent
Modules linked in: qman_tester(-)
NIP: 8000000000008010 LR: c000000000074858 CTR: 8000000000008010
REGS: c00000002e29bab0 TRAP: 0400   Not tainted
(2.6.34.6-00744-g2d21f14)
MSR: 0000000080029000 <EE,ME,CE>  CR: 24000448  XER: 00000000
TASK = c00000007a8be600[4987] 'rmmod' THREAD: c00000002e298000 CPU: 1
GPR00: 8000000000008010 c00000002e29bd30 8000000000012798 c00000000035fb28
GPR04: 0000000000000002 0000000000000002 0000000024022428 c000000000009108
GPR08: fffffffffffffffe 800000000000a618 c0000000003c13c8 0000000000000000
GPR12: 0000000022000444 c00000000fffed00 0000000000000000 0000000000000000
GPR16: 00000000100c0000 0000000000000000 00000000100dabc8 0000000010099688
GPR20: 0000000000000000 00000000100cfc28 0000000000000000 0000000010011a44
GPR24: 00000000100017b2 0000000000000000 0000000000000000 0000000000000880
GPR28: c00000000035fb28 800000000000a7b8 c000000000376d80 c0000000003cce50
NIP [8000000000008010] .test_exit+0x0/0x10 [qman_tester]
LR [c000000000074858] .SyS_delete_module+0x1f8/0x2f0
Call Trace:
[c00000002e29bd30] [c0000000000748b4] .SyS_delete_module+0x254/0x2f0 (unreliable)
[c00000002e29be30] [c000000000000580] syscall_exit+0x0/0x2c
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
38600000 4e800020 60000000 60000000 <4e800020> 60000000 60000000 60000000
---[ end trace 4f57124939a84dc8 ]---

This appears to be due to checking the wrong permission bits in the
instruction_tlb_miss handling if the address that faulted was in vmalloc
space.  We need to look at the supervisor execute (_PAGE_BAP_SX) bit and
not the user bit (_PAGE_BAP_UX/_PAGE_EXEC).

Also removed a branch level since it did not appear to be used.

Reported-by: Jeffrey Ladouceur <Jeffrey.Ladouceur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/tlb_low_64e.S | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index 8b04c54e596f..8526bd9d2aa3 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -138,8 +138,11 @@
 	cmpldi	cr0,r15,0			/* Check for user region */
 	std	r14,EX_TLB_ESR(r12)		/* write crazy -1 to frame */
 	beq	normal_tlb_miss
+
+	li	r11,_PAGE_PRESENT|_PAGE_BAP_SX	/* Base perm */
+	oris	r11,r11,_PAGE_ACCESSED@h
 	/* XXX replace the RMW cycles with immediate loads + writes */
-1:	mfspr	r10,SPRN_MAS1
+	mfspr	r10,SPRN_MAS1
 	cmpldi	cr0,r15,8			/* Check for vmalloc region */
 	rlwinm	r10,r10,0,16,1			/* Clear TID */
 	mtspr	SPRN_MAS1,r10

From 0f6b77ca12bea571e0a97b0588f62aa5f6012d61 Mon Sep 17 00:00:00 2001
From: Alessio Igor Bogani <abogani@texware.it>
Date: Tue, 16 Nov 2010 07:55:16 +0000
Subject: [PATCH 0707/1066] powerpc: Update a BKL related comment

The commit 5e3d20a remove bkl from startup code so setup_arch() it isn't called
with bkl held anymore. Update the comment on top of that function.
Fix also a typo.

This work was supported by a hardware donation from the CE Linux Forum.

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/setup_64.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 2a178b0ebcdf..ce6f61c6f871 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -497,9 +497,8 @@ static void __init emergency_stack_init(void)
 }
 
 /*
- * Called into from start_kernel, after lock_kernel has been called.
- * Initializes bootmem, which is unsed to manage page allocation until
- * mem_init is called.
+ * Called into from start_kernel this initializes bootmem, which is used
+ * to manage page allocation until mem_init is called.
  */
 void __init setup_arch(char **cmdline_p)
 {

From da3bd8203082794d26de3a0a6a7d1ee639d07eb1 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Tue, 5 Oct 2010 15:07:33 +0200
Subject: [PATCH 0708/1066] drm/nouveau: ratelimit IRQ messages

There are two messages in the ISR of nouveau which might be printed out
hundred times in a second. Ratelimit them. (We need to move
nouveau_ratelimit to the top of the file.)

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_irq.c | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c
index 6fd51a51c608..b9e1ffed8557 100644
--- a/drivers/gpu/drm/nouveau/nouveau_irq.c
+++ b/drivers/gpu/drm/nouveau/nouveau_irq.c
@@ -42,6 +42,13 @@
 #include "nouveau_connector.h"
 #include "nv50_display.h"
 
+static DEFINE_RATELIMIT_STATE(nouveau_ratelimit_state, 3 * HZ, 20);
+
+static int nouveau_ratelimit(void)
+{
+	return __ratelimit(&nouveau_ratelimit_state);
+}
+
 void
 nouveau_irq_preinstall(struct drm_device *dev)
 {
@@ -213,11 +220,12 @@ nouveau_fifo_irq_handler(struct drm_device *dev)
 				u32 ib_get = nv_rd32(dev, 0x003334);
 				u32 ib_put = nv_rd32(dev, 0x003330);
 
-				NV_INFO(dev, "PFIFO_DMA_PUSHER - Ch %d Get 0x%02x%08x "
+				if (nouveau_ratelimit())
+					NV_INFO(dev, "PFIFO_DMA_PUSHER - Ch %d Get 0x%02x%08x "
 					     "Put 0x%02x%08x IbGet 0x%08x IbPut 0x%08x "
 					     "State 0x%08x Push 0x%08x\n",
-					chid, ho_get, get, ho_put, put, ib_get, ib_put,
-					state, push);
+						chid, ho_get, get, ho_put, put,
+						ib_get, ib_put, state, push);
 
 				/* METHOD_COUNT, in DMA_STATE on earlier chipsets */
 				nv_wr32(dev, 0x003364, 0x00000000);
@@ -266,8 +274,9 @@ nouveau_fifo_irq_handler(struct drm_device *dev)
 		}
 
 		if (status) {
-			NV_INFO(dev, "PFIFO_INTR 0x%08x - Ch %d\n",
-				status, chid);
+			if (nouveau_ratelimit())
+				NV_INFO(dev, "PFIFO_INTR 0x%08x - Ch %d\n",
+					status, chid);
 			nv_wr32(dev, NV03_PFIFO_INTR_0, status);
 			status = 0;
 		}
@@ -544,13 +553,6 @@ nouveau_pgraph_intr_notify(struct drm_device *dev, uint32_t nsource)
 		nouveau_graph_dump_trap_info(dev, "PGRAPH_NOTIFY", &trap);
 }
 
-static DEFINE_RATELIMIT_STATE(nouveau_ratelimit_state, 3 * HZ, 20);
-
-static int nouveau_ratelimit(void)
-{
-	return __ratelimit(&nouveau_ratelimit_state);
-}
-
 
 static inline void
 nouveau_pgraph_intr_error(struct drm_device *dev, uint32_t nsource)

From 907af60b93045ae33b450553167aa8f684252de3 Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Sat, 9 Oct 2010 04:02:09 +0200
Subject: [PATCH 0709/1066] drm/nouveau: Fix sleep while atomic in the
 semaphore code.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_fence.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c
index 441b12420bb1..ab1bbfbf266e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fence.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fence.c
@@ -249,6 +249,7 @@ alloc_semaphore(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_semaphore *sema;
+	int ret;
 
 	if (!USE_SEMA(dev))
 		return NULL;
@@ -257,10 +258,14 @@ alloc_semaphore(struct drm_device *dev)
 	if (!sema)
 		goto fail;
 
+	ret = drm_mm_pre_get(&dev_priv->fence.heap);
+	if (ret)
+		goto fail;
+
 	spin_lock(&dev_priv->fence.lock);
 	sema->mem = drm_mm_search_free(&dev_priv->fence.heap, 4, 0, 0);
 	if (sema->mem)
-		sema->mem = drm_mm_get_block(sema->mem, 4, 0);
+		sema->mem = drm_mm_get_block_atomic(sema->mem, 4, 0);
 	spin_unlock(&dev_priv->fence.lock);
 
 	if (!sema->mem)

From 1f5bd44354c878cf8bb0e28a7cb27677e3640c45 Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Sat, 2 Oct 2010 16:00:35 +0200
Subject: [PATCH 0710/1066] drm/nouveau: Reject modes exceeding the integrated
 TMDS maximum bandwidth.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Reported-by: Grzesiek Sójka <pld@pfu.pl>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_connector.c | 27 ++++++++++++++++-----
 1 file changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 0871495096fa..6208eedc0970 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -641,11 +641,28 @@ nouveau_connector_get_modes(struct drm_connector *connector)
 	return ret;
 }
 
+static unsigned
+get_tmds_link_bandwidth(struct drm_connector *connector)
+{
+	struct nouveau_connector *nv_connector = nouveau_connector(connector);
+	struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
+	struct dcb_entry *dcb = nv_connector->detected_encoder->dcb;
+
+	if (dcb->location != DCB_LOC_ON_CHIP ||
+	    dev_priv->chipset >= 0x46)
+		return 165000;
+	else if (dev_priv->chipset >= 0x40)
+		return 155000;
+	else if (dev_priv->chipset >= 0x18)
+		return 135000;
+	else
+		return 112000;
+}
+
 static int
 nouveau_connector_mode_valid(struct drm_connector *connector,
 			     struct drm_display_mode *mode)
 {
-	struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
 	struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
 	struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
@@ -663,11 +680,9 @@ nouveau_connector_mode_valid(struct drm_connector *connector,
 		max_clock = 400000;
 		break;
 	case OUTPUT_TMDS:
-		if ((dev_priv->card_type >= NV_50 && !nouveau_duallink) ||
-		    !nv_encoder->dcb->duallink_possible)
-			max_clock = 165000;
-		else
-			max_clock = 330000;
+		max_clock = get_tmds_link_bandwidth(connector);
+		if (nouveau_duallink && nv_encoder->dcb->duallink_possible)
+			max_clock *= 2;
 		break;
 	case OUTPUT_ANALOG:
 		max_clock = nv_encoder->dcb->crtconf.maxfreq;

From 327ceae6643ddafb0c514183f00e7fc8ca6b6e99 Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Sun, 10 Oct 2010 05:21:59 +0200
Subject: [PATCH 0711/1066] drm/nv04-nv40: Fall back to panel rescaling if we
 have no usable native mode.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This allows the user to set a mode larger than the native one, useful
if we had trouble finding the actual native mode (e.g. because it goes
above the hardware bandwidth limits).

Reported-by: Grzesiek Sójka <pld@pfu.pl>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nv04_dfp.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nv04_dfp.c b/drivers/gpu/drm/nouveau/nv04_dfp.c
index c936403b26e2..ef23550407b5 100644
--- a/drivers/gpu/drm/nouveau/nv04_dfp.c
+++ b/drivers/gpu/drm/nouveau/nv04_dfp.c
@@ -185,14 +185,15 @@ static bool nv04_dfp_mode_fixup(struct drm_encoder *encoder,
 	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
 	struct nouveau_connector *nv_connector = nouveau_encoder_connector_get(nv_encoder);
 
-	/* For internal panels and gpu scaling on DVI we need the native mode */
-	if (nv_connector->scaling_mode != DRM_MODE_SCALE_NONE) {
-		if (!nv_connector->native_mode)
-			return false;
+	if (!nv_connector->native_mode ||
+	    nv_connector->scaling_mode == DRM_MODE_SCALE_NONE ||
+	    mode->hdisplay > nv_connector->native_mode->hdisplay ||
+	    mode->vdisplay > nv_connector->native_mode->vdisplay) {
+		nv_encoder->mode = *adjusted_mode;
+
+	} else {
 		nv_encoder->mode = *nv_connector->native_mode;
 		adjusted_mode->clock = nv_connector->native_mode->clock;
-	} else {
-		nv_encoder->mode = *adjusted_mode;
 	}
 
 	return true;

From 5eb94fbba39e71f04d629f8197343273b56e25eb Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Thu, 7 Oct 2010 03:33:15 +0200
Subject: [PATCH 0712/1066] drm/nv11: Fix bad PLL detection false positive.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_hw.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_hw.c b/drivers/gpu/drm/nouveau/nouveau_hw.c
index bed669a54a2d..b9672a05c411 100644
--- a/drivers/gpu/drm/nouveau/nouveau_hw.c
+++ b/drivers/gpu/drm/nouveau/nouveau_hw.c
@@ -519,11 +519,11 @@ nouveau_hw_fix_bad_vpll(struct drm_device *dev, int head)
 
 	struct pll_lims pll_lim;
 	struct nouveau_pll_vals pv;
-	uint32_t pllreg = head ? NV_RAMDAC_VPLL2 : NV_PRAMDAC_VPLL_COEFF;
+	enum pll_types pll = head ? PLL_VPLL1 : PLL_VPLL0;
 
-	if (get_pll_limits(dev, pllreg, &pll_lim))
+	if (get_pll_limits(dev, pll, &pll_lim))
 		return;
-	nouveau_hw_get_pllvals(dev, pllreg, &pv);
+	nouveau_hw_get_pllvals(dev, pll, &pv);
 
 	if (pv.M1 >= pll_lim.vco1.min_m && pv.M1 <= pll_lim.vco1.max_m &&
 	    pv.N1 >= pll_lim.vco1.min_n && pv.N1 <= pll_lim.vco1.max_n &&
@@ -536,7 +536,7 @@ nouveau_hw_fix_bad_vpll(struct drm_device *dev, int head)
 	pv.M1 = pll_lim.vco1.max_m;
 	pv.N1 = pll_lim.vco1.min_n;
 	pv.log2P = pll_lim.max_usable_log2p;
-	nouveau_hw_setpll(dev, pllreg, &pv);
+	nouveau_hw_setpll(dev, pll_lim.reg, &pv);
 }
 
 /*

From cbab95db84f2a444d99bec77bac8b9b6ef20d11c Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Mon, 11 Oct 2010 03:43:58 +0200
Subject: [PATCH 0713/1066] drm/nouveau: Some random cleanups.

Remove some unused/duplicated definitions and make sparse happy again.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_drv.h | 41 ++-------------------------
 drivers/gpu/drm/nouveau/nouveau_irq.c | 19 +++++++------
 drivers/gpu/drm/nouveau/nouveau_mem.c |  6 ++--
 3 files changed, 16 insertions(+), 50 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 3a07e580d27a..135594c44167 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -485,13 +485,13 @@ enum nv04_fp_display_regs {
 };
 
 struct nv04_crtc_reg {
-	unsigned char MiscOutReg;     /* */
+	unsigned char MiscOutReg;
 	uint8_t CRTC[0xa0];
 	uint8_t CR58[0x10];
 	uint8_t Sequencer[5];
 	uint8_t Graphics[9];
 	uint8_t Attribute[21];
-	unsigned char DAC[768];       /* Internal Colorlookuptable */
+	unsigned char DAC[768];
 
 	/* PCRTC regs */
 	uint32_t fb_start;
@@ -539,43 +539,9 @@ struct nv04_output_reg {
 };
 
 struct nv04_mode_state {
-	uint32_t bpp;
-	uint32_t width;
-	uint32_t height;
-	uint32_t interlace;
-	uint32_t repaint0;
-	uint32_t repaint1;
-	uint32_t screen;
-	uint32_t scale;
-	uint32_t dither;
-	uint32_t extra;
-	uint32_t fifo;
-	uint32_t pixel;
-	uint32_t horiz;
-	int arbitration0;
-	int arbitration1;
-	uint32_t pll;
-	uint32_t pllB;
-	uint32_t vpll;
-	uint32_t vpll2;
-	uint32_t vpllB;
-	uint32_t vpll2B;
+	struct nv04_crtc_reg crtc_reg[2];
 	uint32_t pllsel;
 	uint32_t sel_clk;
-	uint32_t general;
-	uint32_t crtcOwner;
-	uint32_t head;
-	uint32_t head2;
-	uint32_t cursorConfig;
-	uint32_t cursor0;
-	uint32_t cursor1;
-	uint32_t cursor2;
-	uint32_t timingH;
-	uint32_t timingV;
-	uint32_t displayV;
-	uint32_t crtcSync;
-
-	struct nv04_crtc_reg crtc_reg[2];
 };
 
 enum nouveau_card_type {
@@ -1239,7 +1205,6 @@ extern u16 nouveau_bo_rd16(struct nouveau_bo *nvbo, unsigned index);
 extern void nouveau_bo_wr16(struct nouveau_bo *nvbo, unsigned index, u16 val);
 extern u32 nouveau_bo_rd32(struct nouveau_bo *nvbo, unsigned index);
 extern void nouveau_bo_wr32(struct nouveau_bo *nvbo, unsigned index, u32 val);
-extern int nouveau_bo_sync_gpu(struct nouveau_bo *, struct nouveau_channel *);
 
 /* nouveau_fence.c */
 struct nouveau_fence;
diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c
index b9e1ffed8557..e2f2d59be3ea 100644
--- a/drivers/gpu/drm/nouveau/nouveau_irq.c
+++ b/drivers/gpu/drm/nouveau/nouveau_irq.c
@@ -209,8 +209,8 @@ nouveau_fifo_irq_handler(struct drm_device *dev)
 		}
 
 		if (status & NV_PFIFO_INTR_DMA_PUSHER) {
-			u32 get = nv_rd32(dev, 0x003244);
-			u32 put = nv_rd32(dev, 0x003240);
+			u32 dma_get = nv_rd32(dev, 0x003244);
+			u32 dma_put = nv_rd32(dev, 0x003240);
 			u32 push = nv_rd32(dev, 0x003220);
 			u32 state = nv_rd32(dev, 0x003228);
 
@@ -224,13 +224,14 @@ nouveau_fifo_irq_handler(struct drm_device *dev)
 					NV_INFO(dev, "PFIFO_DMA_PUSHER - Ch %d Get 0x%02x%08x "
 					     "Put 0x%02x%08x IbGet 0x%08x IbPut 0x%08x "
 					     "State 0x%08x Push 0x%08x\n",
-						chid, ho_get, get, ho_put, put,
-						ib_get, ib_put, state, push);
+						chid, ho_get, dma_get, ho_put,
+						dma_put, ib_get, ib_put, state,
+						push);
 
 				/* METHOD_COUNT, in DMA_STATE on earlier chipsets */
 				nv_wr32(dev, 0x003364, 0x00000000);
-				if (get != put || ho_get != ho_put) {
-					nv_wr32(dev, 0x003244, put);
+				if (dma_get != dma_put || ho_get != ho_put) {
+					nv_wr32(dev, 0x003244, dma_put);
 					nv_wr32(dev, 0x003328, ho_put);
 				} else
 				if (ib_get != ib_put) {
@@ -239,10 +240,10 @@ nouveau_fifo_irq_handler(struct drm_device *dev)
 			} else {
 				NV_INFO(dev, "PFIFO_DMA_PUSHER - Ch %d Get 0x%08x "
 					     "Put 0x%08x State 0x%08x Push 0x%08x\n",
-					chid, get, put, state, push);
+					chid, dma_get, dma_put, state, push);
 
-				if (get != put)
-					nv_wr32(dev, 0x003244, put);
+				if (dma_get != dma_put)
+					nv_wr32(dev, 0x003244, dma_put);
 			}
 
 			nv_wr32(dev, 0x003228, 0x00000000);
diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c
index a163c7c612e7..1165c3e68200 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mem.c
@@ -33,9 +33,9 @@
 #include "drmP.h"
 #include "drm.h"
 #include "drm_sarea.h"
-#include "nouveau_drv.h"
 
-#define MIN(a,b) a < b ? a : b
+#include "nouveau_drv.h"
+#include "nouveau_pm.h"
 
 /*
  * NV10-NV40 tiling helpers
@@ -719,7 +719,7 @@ nouveau_mem_timing_init(struct drm_device *dev)
 		tUNK_19 = 1;
 		tUNK_20 = 0;
 		tUNK_21 = 0;
-		switch (MIN(recordlen,21)) {
+		switch (min(recordlen, 21)) {
 		case 21:
 			tUNK_21 = entry[21];
 		case 20:

From 7bb94d26ad62ca1d6b5e11db6e26425785cc46ac Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Mon, 11 Oct 2010 03:37:32 +0200
Subject: [PATCH 0714/1066] drm/nouveau: Avoid lock dependency between ramht
 and ramin spinlocks.

The ramht code called some gpuobj functions with the HARDIRQ-safe
RAMHT spinlock held, this could potentially lead to a dead lock
because ramin_lock is HARDIRQ-unsafe.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_ramht.c | 71 +++++++++++++++----------
 1 file changed, 44 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_ramht.c b/drivers/gpu/drm/nouveau/nouveau_ramht.c
index 7f16697cc96c..2d8580927ca4 100644
--- a/drivers/gpu/drm/nouveau/nouveau_ramht.c
+++ b/drivers/gpu/drm/nouveau/nouveau_ramht.c
@@ -153,26 +153,42 @@ nouveau_ramht_insert(struct nouveau_channel *chan, u32 handle,
 	return -ENOMEM;
 }
 
+static struct nouveau_ramht_entry *
+nouveau_ramht_remove_entry(struct nouveau_channel *chan, u32 handle)
+{
+	struct nouveau_ramht *ramht = chan ? chan->ramht : NULL;
+	struct nouveau_ramht_entry *entry;
+	unsigned long flags;
+
+	if (!ramht)
+		return NULL;
+
+	spin_lock_irqsave(&ramht->lock, flags);
+	list_for_each_entry(entry, &ramht->entries, head) {
+		if (entry->channel == chan &&
+		    (!handle || entry->handle == handle)) {
+			list_del(&entry->head);
+			spin_unlock_irqrestore(&ramht->lock, flags);
+
+			return entry;
+		}
+	}
+	spin_unlock_irqrestore(&ramht->lock, flags);
+
+	return NULL;
+}
+
 static void
-nouveau_ramht_remove_locked(struct nouveau_channel *chan, u32 handle)
+nouveau_ramht_remove_hash(struct nouveau_channel *chan, u32 handle)
 {
 	struct drm_device *dev = chan->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_instmem_engine *instmem = &dev_priv->engine.instmem;
 	struct nouveau_gpuobj *ramht = chan->ramht->gpuobj;
-	struct nouveau_ramht_entry *entry, *tmp;
+	unsigned long flags;
 	u32 co, ho;
 
-	list_for_each_entry_safe(entry, tmp, &chan->ramht->entries, head) {
-		if (entry->channel != chan || entry->handle != handle)
-			continue;
-
-		nouveau_gpuobj_ref(NULL, &entry->gpuobj);
-		list_del(&entry->head);
-		kfree(entry);
-		break;
-	}
-
+	spin_lock_irqsave(&chan->ramht->lock, flags);
 	co = ho = nouveau_ramht_hash_handle(chan, handle);
 	do {
 		if (nouveau_ramht_entry_valid(dev, ramht, co) &&
@@ -184,7 +200,7 @@ nouveau_ramht_remove_locked(struct nouveau_channel *chan, u32 handle)
 			nv_wo32(ramht, co + 0, 0x00000000);
 			nv_wo32(ramht, co + 4, 0x00000000);
 			instmem->flush(dev);
-			return;
+			goto out;
 		}
 
 		co += 8;
@@ -194,17 +210,22 @@ nouveau_ramht_remove_locked(struct nouveau_channel *chan, u32 handle)
 
 	NV_ERROR(dev, "RAMHT entry not found. ch=%d, handle=0x%08x\n",
 		 chan->id, handle);
+out:
+	spin_unlock_irqrestore(&chan->ramht->lock, flags);
 }
 
 void
 nouveau_ramht_remove(struct nouveau_channel *chan, u32 handle)
 {
-	struct nouveau_ramht *ramht = chan->ramht;
-	unsigned long flags;
+	struct nouveau_ramht_entry *entry;
 
-	spin_lock_irqsave(&ramht->lock, flags);
-	nouveau_ramht_remove_locked(chan, handle);
-	spin_unlock_irqrestore(&ramht->lock, flags);
+	entry = nouveau_ramht_remove_entry(chan, handle);
+	if (!entry)
+		return;
+
+	nouveau_ramht_remove_hash(chan, entry->handle);
+	nouveau_gpuobj_ref(NULL, &entry->gpuobj);
+	kfree(entry);
 }
 
 struct nouveau_gpuobj *
@@ -265,23 +286,19 @@ void
 nouveau_ramht_ref(struct nouveau_ramht *ref, struct nouveau_ramht **ptr,
 		  struct nouveau_channel *chan)
 {
-	struct nouveau_ramht_entry *entry, *tmp;
+	struct nouveau_ramht_entry *entry;
 	struct nouveau_ramht *ramht;
-	unsigned long flags;
 
 	if (ref)
 		kref_get(&ref->refcount);
 
 	ramht = *ptr;
 	if (ramht) {
-		spin_lock_irqsave(&ramht->lock, flags);
-		list_for_each_entry_safe(entry, tmp, &ramht->entries, head) {
-			if (entry->channel != chan)
-				continue;
-
-			nouveau_ramht_remove_locked(chan, entry->handle);
+		while ((entry = nouveau_ramht_remove_entry(chan, 0))) {
+			nouveau_ramht_remove_hash(chan, entry->handle);
+			nouveau_gpuobj_ref(NULL, &entry->gpuobj);
+			kfree(entry);
 		}
-		spin_unlock_irqrestore(&ramht->lock, flags);
 
 		kref_put(&ramht->refcount, nouveau_ramht_del);
 	}

From 1397b42b5a2e5b3b982078c89f3594c123e3c2b3 Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Tue, 12 Oct 2010 03:17:43 +0200
Subject: [PATCH 0715/1066] drm/nouveau: Reduce severity of the unknown
 getparam error.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_state.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index ed7757f14083..af2bec36d91b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -1051,7 +1051,7 @@ int nouveau_ioctl_getparam(struct drm_device *dev, void *data,
 		}
 		/* FALLTHRU */
 	default:
-		NV_ERROR(dev, "unknown parameter %lld\n", getparam->param);
+		NV_DEBUG(dev, "unknown parameter %lld\n", getparam->param);
 		return -EINVAL;
 	}
 
@@ -1066,7 +1066,7 @@ nouveau_ioctl_setparam(struct drm_device *dev, void *data,
 
 	switch (setparam->param) {
 	default:
-		NV_ERROR(dev, "unknown parameter %lld\n", setparam->param);
+		NV_DEBUG(dev, "unknown parameter %lld\n", setparam->param);
 		return -EINVAL;
 	}
 

From f13b32630dda7e583a84a8c535880cff7e4a9bdd Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Sun, 10 Oct 2010 06:01:08 +0200
Subject: [PATCH 0716/1066] drm/nouveau: Expose some BO usage flags to
 userspace.

This will be needed for Z compression and to take smarter placement
decisions.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_bo.c    | 15 +++++++----
 drivers/gpu/drm/nouveau/nouveau_drv.h   |  3 +++
 drivers/gpu/drm/nouveau/nouveau_gem.c   | 36 ++++++++++++++-----------
 drivers/gpu/drm/nouveau/nouveau_state.c |  3 +++
 drivers/gpu/drm/nouveau/nv50_crtc.c     |  4 +--
 include/drm/nouveau_drm.h               |  7 +++++
 6 files changed, 46 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c
index 80353e2b8409..f55dd9145b7c 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -144,7 +144,8 @@ nouveau_bo_new(struct drm_device *dev, struct nouveau_channel *chan,
 	nvbo->tile_mode = tile_mode;
 	nvbo->tile_flags = tile_flags;
 
-	nouveau_bo_fixup_align(dev, tile_mode, tile_flags, &align, &size);
+	nouveau_bo_fixup_align(dev, tile_mode, nouveau_bo_tile_layout(nvbo),
+			       &align, &size);
 	align >>= PAGE_SHIFT;
 
 	nouveau_bo_placement_set(nvbo, flags, 0);
@@ -525,7 +526,8 @@ nv50_bo_move_m2mf(struct nouveau_channel *chan, struct ttm_buffer_object *bo,
 		stride  = 16 * 4;
 		height  = amount / stride;
 
-		if (new_mem->mem_type == TTM_PL_VRAM && nvbo->tile_flags) {
+		if (new_mem->mem_type == TTM_PL_VRAM &&
+		    nouveau_bo_tile_layout(nvbo)) {
 			ret = RING_SPACE(chan, 8);
 			if (ret)
 				return ret;
@@ -546,7 +548,8 @@ nv50_bo_move_m2mf(struct nouveau_channel *chan, struct ttm_buffer_object *bo,
 			BEGIN_RING(chan, NvSubM2MF, 0x0200, 1);
 			OUT_RING  (chan, 1);
 		}
-		if (old_mem->mem_type == TTM_PL_VRAM && nvbo->tile_flags) {
+		if (old_mem->mem_type == TTM_PL_VRAM &&
+		    nouveau_bo_tile_layout(nvbo)) {
 			ret = RING_SPACE(chan, 8);
 			if (ret)
 				return ret;
@@ -753,7 +756,8 @@ nouveau_bo_vm_bind(struct ttm_buffer_object *bo, struct ttm_mem_reg *new_mem,
 	if (dev_priv->card_type == NV_50) {
 		ret = nv50_mem_vm_bind_linear(dev,
 					      offset + dev_priv->vm_vram_base,
-					      new_mem->size, nvbo->tile_flags,
+					      new_mem->size,
+					      nouveau_bo_tile_layout(nvbo),
 					      offset);
 		if (ret)
 			return ret;
@@ -894,7 +898,8 @@ nouveau_ttm_fault_reserve_notify(struct ttm_buffer_object *bo)
 	 * nothing to do here.
 	 */
 	if (bo->mem.mem_type != TTM_PL_VRAM) {
-		if (dev_priv->card_type < NV_50 || !nvbo->tile_flags)
+		if (dev_priv->card_type < NV_50 ||
+		    !nouveau_bo_tile_layout(nvbo))
 			return 0;
 	}
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 135594c44167..60a54fae90c1 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -100,6 +100,9 @@ struct nouveau_bo {
 	int pin_refcnt;
 };
 
+#define nouveau_bo_tile_layout(nvbo)				\
+	((nvbo)->tile_flags & NOUVEAU_GEM_TILE_LAYOUT_MASK)
+
 static inline struct nouveau_bo *
 nouveau_bo(struct ttm_buffer_object *bo)
 {
diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
index 5c4c929d7f74..9a1fdcf400c2 100644
--- a/drivers/gpu/drm/nouveau/nouveau_gem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
@@ -107,23 +107,29 @@ nouveau_gem_info(struct drm_gem_object *gem, struct drm_nouveau_gem_info *rep)
 }
 
 static bool
-nouveau_gem_tile_flags_valid(struct drm_device *dev, uint32_t tile_flags) {
-	switch (tile_flags) {
-	case 0x0000:
-	case 0x1800:
-	case 0x2800:
-	case 0x4800:
-	case 0x7000:
-	case 0x7400:
-	case 0x7a00:
-	case 0xe000:
-		break;
-	default:
-		NV_ERROR(dev, "bad page flags: 0x%08x\n", tile_flags);
-		return false;
+nouveau_gem_tile_flags_valid(struct drm_device *dev, uint32_t tile_flags)
+{
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->card_type >= NV_50) {
+		switch (tile_flags & NOUVEAU_GEM_TILE_LAYOUT_MASK) {
+		case 0x0000:
+		case 0x1800:
+		case 0x2800:
+		case 0x4800:
+		case 0x7000:
+		case 0x7400:
+		case 0x7a00:
+		case 0xe000:
+			return true;
+		}
+	} else {
+		if (!(tile_flags & NOUVEAU_GEM_TILE_LAYOUT_MASK))
+			return true;
 	}
 
-	return true;
+	NV_ERROR(dev, "bad page flags: 0x%08x\n", tile_flags);
+	return false;
 }
 
 int
diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index af2bec36d91b..ea3452194cd6 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -1041,6 +1041,9 @@ int nouveau_ioctl_getparam(struct drm_device *dev, void *data,
 	case NOUVEAU_GETPARAM_PTIMER_TIME:
 		getparam->value = dev_priv->engine.timer.read(dev);
 		break;
+	case NOUVEAU_GETPARAM_HAS_BO_USAGE:
+		getparam->value = 1;
+		break;
 	case NOUVEAU_GETPARAM_GRAPH_UNITS:
 		/* NV40 and NV50 versions are quite different, but register
 		 * address is the same. User is supposed to know the card
diff --git a/drivers/gpu/drm/nouveau/nv50_crtc.c b/drivers/gpu/drm/nouveau/nv50_crtc.c
index 16380d52cd88..56476d0c6de8 100644
--- a/drivers/gpu/drm/nouveau/nv50_crtc.c
+++ b/drivers/gpu/drm/nouveau/nv50_crtc.c
@@ -546,7 +546,7 @@ nv50_crtc_do_mode_set_base(struct drm_crtc *crtc,
 	}
 
 	nv_crtc->fb.offset = fb->nvbo->bo.offset - dev_priv->vm_vram_base;
-	nv_crtc->fb.tile_flags = fb->nvbo->tile_flags;
+	nv_crtc->fb.tile_flags = nouveau_bo_tile_layout(fb->nvbo);
 	nv_crtc->fb.cpp = drm_fb->bits_per_pixel / 8;
 	if (!nv_crtc->fb.blanked && dev_priv->chipset != 0x50) {
 		ret = RING_SPACE(evo, 2);
@@ -578,7 +578,7 @@ nv50_crtc_do_mode_set_base(struct drm_crtc *crtc,
 				  fb->nvbo->tile_mode);
 	}
 	if (dev_priv->chipset == 0x50)
-		OUT_RING(evo, (fb->nvbo->tile_flags << 8) | format);
+		OUT_RING(evo, (nv_crtc->fb.tile_flags << 8) | format);
 	else
 		OUT_RING(evo, format);
 
diff --git a/include/drm/nouveau_drm.h b/include/drm/nouveau_drm.h
index 01a714119506..bc5590b1a1ac 100644
--- a/include/drm/nouveau_drm.h
+++ b/include/drm/nouveau_drm.h
@@ -80,6 +80,7 @@ struct drm_nouveau_gpuobj_free {
 #define NOUVEAU_GETPARAM_VM_VRAM_BASE    12
 #define NOUVEAU_GETPARAM_GRAPH_UNITS     13
 #define NOUVEAU_GETPARAM_PTIMER_TIME     14
+#define NOUVEAU_GETPARAM_HAS_BO_USAGE    15
 struct drm_nouveau_getparam {
 	uint64_t param;
 	uint64_t value;
@@ -95,6 +96,12 @@ struct drm_nouveau_setparam {
 #define NOUVEAU_GEM_DOMAIN_GART      (1 << 2)
 #define NOUVEAU_GEM_DOMAIN_MAPPABLE  (1 << 3)
 
+#define NOUVEAU_GEM_TILE_LAYOUT_MASK 0x0000ff00
+#define NOUVEAU_GEM_TILE_16BPP       0x00000001
+#define NOUVEAU_GEM_TILE_32BPP       0x00000002
+#define NOUVEAU_GEM_TILE_ZETA        0x00000004
+#define NOUVEAU_GEM_TILE_NONCONTIG   0x00000008
+
 struct drm_nouveau_gem_info {
 	uint32_t handle;
 	uint32_t domain;

From 699ddfd98061b725c52fd34ff1c4346e5b4824d4 Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Sun, 10 Oct 2010 06:07:32 +0200
Subject: [PATCH 0717/1066] drm/nv10: Balance RTs expected to be accessed
 simultaneously by the 3d engine.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_bo.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c
index f55dd9145b7c..c41e1c200ef5 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -143,6 +143,7 @@ nouveau_bo_new(struct drm_device *dev, struct nouveau_channel *chan,
 	nvbo->no_vm = no_vm;
 	nvbo->tile_mode = tile_mode;
 	nvbo->tile_flags = tile_flags;
+	nvbo->bo.bdev = &dev_priv->ttm.bdev;
 
 	nouveau_bo_fixup_align(dev, tile_mode, nouveau_bo_tile_layout(nvbo),
 			       &align, &size);
@@ -177,6 +178,31 @@ set_placement_list(uint32_t *pl, unsigned *n, uint32_t type, uint32_t flags)
 		pl[(*n)++] = TTM_PL_FLAG_SYSTEM | flags;
 }
 
+static void
+set_placement_range(struct nouveau_bo *nvbo, uint32_t type)
+{
+	struct drm_nouveau_private *dev_priv = nouveau_bdev(nvbo->bo.bdev);
+
+	if (dev_priv->card_type == NV_10 &&
+	    nvbo->tile_mode && (type & TTM_PL_FLAG_VRAM)) {
+		/*
+		 * Make sure that the color and depth buffers are handled
+		 * by independent memory controller units. Up to a 9x
+		 * speed up when alpha-blending and depth-test are enabled
+		 * at the same time.
+		 */
+		int vram_pages = dev_priv->vram_size >> PAGE_SHIFT;
+
+		if (nvbo->tile_flags & NOUVEAU_GEM_TILE_ZETA) {
+			nvbo->placement.fpfn = vram_pages / 2;
+			nvbo->placement.lpfn = ~0;
+		} else {
+			nvbo->placement.fpfn = 0;
+			nvbo->placement.lpfn = vram_pages / 2;
+		}
+	}
+}
+
 void
 nouveau_bo_placement_set(struct nouveau_bo *nvbo, uint32_t type, uint32_t busy)
 {
@@ -191,6 +217,8 @@ nouveau_bo_placement_set(struct nouveau_bo *nvbo, uint32_t type, uint32_t busy)
 	pl->busy_placement = nvbo->busy_placements;
 	set_placement_list(nvbo->busy_placements, &pl->num_busy_placement,
 			   type | busy, flags);
+
+	set_placement_range(nvbo, type);
 }
 
 int

From 2a56a0b913a8d7314c2c10fdd57d667b599232b4 Mon Sep 17 00:00:00 2001
From: Ben Skeggs <bskeggs@redhat.com>
Date: Fri, 1 Oct 2010 14:39:37 +1000
Subject: [PATCH 0718/1066] drm/nva3: fix overflow in fixed point math used for
 pll calculation

And a slight tweak which gets us closer to VBIOS-calculated numbers.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nv50_calc.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nv50_calc.c b/drivers/gpu/drm/nouveau/nv50_calc.c
index 2cdc2bfe7179..de81151648f8 100644
--- a/drivers/gpu/drm/nouveau/nv50_calc.c
+++ b/drivers/gpu/drm/nouveau/nv50_calc.c
@@ -51,24 +51,28 @@ nv50_calc_pll2(struct drm_device *dev, struct pll_lims *pll, int clk,
 	       int *N, int *fN, int *M, int *P)
 {
 	fixed20_12 fb_div, a, b;
+	u32 refclk = pll->refclk / 10;
+	u32 max_vco_freq = pll->vco1.maxfreq / 10;
+	u32 max_vco_inputfreq = pll->vco1.max_inputfreq / 10;
+	clk /= 10;
 
-	*P = pll->vco1.maxfreq / clk;
+	*P = max_vco_freq / clk;
 	if (*P > pll->max_p)
 		*P = pll->max_p;
 	if (*P < pll->min_p)
 		*P = pll->min_p;
 
-	/* *M = ceil(refclk / pll->vco.max_inputfreq); */
-	a.full = dfixed_const(pll->refclk);
-	b.full = dfixed_const(pll->vco1.max_inputfreq);
+	/* *M = floor((refclk + max_vco_inputfreq) / max_vco_inputfreq); */
+	a.full = dfixed_const(refclk + max_vco_inputfreq);
+	b.full = dfixed_const(max_vco_inputfreq);
 	a.full = dfixed_div(a, b);
-	a.full = dfixed_ceil(a);
+	a.full = dfixed_floor(a);
 	*M = dfixed_trunc(a);
 
 	/* fb_div = (vco * *M) / refclk; */
 	fb_div.full = dfixed_const(clk * *P);
 	fb_div.full = dfixed_mul(fb_div, a);
-	a.full = dfixed_const(pll->refclk);
+	a.full = dfixed_const(refclk);
 	fb_div.full = dfixed_div(fb_div, a);
 
 	/* *N = floor(fb_div); */

From 3c29f9e74591d2f365b159cf59193b19a2f65640 Mon Sep 17 00:00:00 2001
From: Lucas Stach <dev@lynxeye.de>
Date: Fri, 15 Oct 2010 22:22:59 +0200
Subject: [PATCH 0719/1066] drm/nouveau: fix nv40 pcie gart size

Nouveau sets the PCIE GART size to 64MiB for all cards before nv50,
but nv40 has enough RAMIN space to support 512MiB GART size. This
patch fixes this value to make use of this hardware capability.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_sgdma.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
index 288bacac7e5a..15f358404645 100644
--- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c
+++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
@@ -224,7 +224,11 @@ nouveau_sgdma_init(struct drm_device *dev)
 	int i, ret;
 
 	if (dev_priv->card_type < NV_50) {
-		aper_size = (64 * 1024 * 1024);
+		if(dev_priv->card_type < NV_40) {
+			aper_size = (64 * 1024 * 1024);
+		} else {
+			aper_size = (512 * 1024 * 1024);
+		}
 		obj_size  = (aper_size >> NV_CTXDMA_PAGE_SHIFT) * 4;
 		obj_size += 8; /* ctxdma header */
 	} else {

From 5794b5fdb579abf7be2c27c6e0d6106f391a26e4 Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Fri, 22 Oct 2010 04:39:14 +0200
Subject: [PATCH 0720/1066] drm/nv04: Fix scanout over the 16MB mark.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_hw.h | 19 +++++++++++++++++++
 drivers/gpu/drm/nouveau/nv04_crtc.c  |  2 +-
 2 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_hw.h b/drivers/gpu/drm/nouveau/nouveau_hw.h
index 869130f83602..2989090b9434 100644
--- a/drivers/gpu/drm/nouveau/nouveau_hw.h
+++ b/drivers/gpu/drm/nouveau/nouveau_hw.h
@@ -415,6 +415,25 @@ nv_fix_nv40_hw_cursor(struct drm_device *dev, int head)
 	NVWriteRAMDAC(dev, head, NV_PRAMDAC_CU_START_POS, curpos);
 }
 
+static inline void
+nv_set_crtc_base(struct drm_device *dev, int head, uint32_t offset)
+{
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+	NVWriteCRTC(dev, head, NV_PCRTC_START, offset);
+
+	if (dev_priv->card_type == NV_04) {
+		/*
+		 * Hilarious, the 24th bit doesn't want to stick to
+		 * PCRTC_START...
+		 */
+		int cre_heb = NVReadVgaCrtc(dev, head, NV_CIO_CRE_HEB__INDEX);
+
+		NVWriteVgaCrtc(dev, head, NV_CIO_CRE_HEB__INDEX,
+			       (cre_heb & ~0x40) | ((offset >> 18) & 0x40));
+	}
+}
+
 static inline void
 nv_show_cursor(struct drm_device *dev, int head, bool show)
 {
diff --git a/drivers/gpu/drm/nouveau/nv04_crtc.c b/drivers/gpu/drm/nouveau/nv04_crtc.c
index c71abc2a34d5..5b49cec528ee 100644
--- a/drivers/gpu/drm/nouveau/nv04_crtc.c
+++ b/drivers/gpu/drm/nouveau/nv04_crtc.c
@@ -831,7 +831,7 @@ nv04_crtc_do_mode_set_base(struct drm_crtc *crtc,
 	/* Update the framebuffer location. */
 	regp->fb_start = nv_crtc->fb.offset & ~3;
 	regp->fb_start += (y * drm_fb->pitch) + (x * drm_fb->bits_per_pixel / 8);
-	NVWriteCRTC(dev, nv_crtc->index, NV_PCRTC_START, regp->fb_start);
+	nv_set_crtc_base(dev, nv_crtc->index, regp->fb_start);
 
 	/* Update the arbitration parameters. */
 	nouveau_calc_arb(dev, crtc->mode.clock, drm_fb->bits_per_pixel,

From 01db363979e96115a895f35c823303660f0f328d Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Thu, 21 Oct 2010 17:43:08 +0200
Subject: [PATCH 0721/1066] drm/nouveau: Use "force" to decide if analog load
 detection is ok or not.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_connector.c | 69 +++++++++------------
 drivers/gpu/drm/nouveau/nouveau_connector.h |  3 -
 drivers/gpu/drm/nouveau/nv04_crtc.c         |  5 --
 3 files changed, 28 insertions(+), 49 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 6208eedc0970..9ec2b8a81344 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -213,6 +213,24 @@ nouveau_connector_set_encoder(struct drm_connector *connector,
 	}
 }
 
+static bool
+nouveau_connector_poll_allowed(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
+	bool spare_crtc = false;
+
+	if (dev_priv->card_type >= NV_50) {
+		return true;
+	} else {
+		list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
+			spare_crtc |= !crtc->enabled;
+
+		return spare_crtc;
+	}
+}
+
 static enum drm_connector_status
 nouveau_connector_detect(struct drm_connector *connector, bool force)
 {
@@ -281,7 +299,8 @@ detect_analog:
 	nv_encoder = find_encoder_by_type(connector, OUTPUT_ANALOG);
 	if (!nv_encoder && !nouveau_tv_disable)
 		nv_encoder = find_encoder_by_type(connector, OUTPUT_TV);
-	if (nv_encoder) {
+	if (nv_encoder &&
+	    (force || nouveau_connector_poll_allowed(connector))) {
 		struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
 		struct drm_encoder_helper_funcs *helper =
 						encoder->helper_private;
@@ -724,44 +743,6 @@ nouveau_connector_best_encoder(struct drm_connector *connector)
 	return NULL;
 }
 
-void
-nouveau_connector_set_polling(struct drm_connector *connector)
-{
-	struct drm_device *dev = connector->dev;
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct drm_crtc *crtc;
-	bool spare_crtc = false;
-
-	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
-		spare_crtc |= !crtc->enabled;
-
-	connector->polled = 0;
-
-	switch (connector->connector_type) {
-	case DRM_MODE_CONNECTOR_VGA:
-	case DRM_MODE_CONNECTOR_TV:
-		if (dev_priv->card_type >= NV_50 ||
-		    (nv_gf4_disp_arch(dev) && spare_crtc))
-			connector->polled = DRM_CONNECTOR_POLL_CONNECT;
-		break;
-
-	case DRM_MODE_CONNECTOR_DVII:
-	case DRM_MODE_CONNECTOR_DVID:
-	case DRM_MODE_CONNECTOR_HDMIA:
-	case DRM_MODE_CONNECTOR_DisplayPort:
-	case DRM_MODE_CONNECTOR_eDP:
-		if (dev_priv->card_type >= NV_50)
-			connector->polled = DRM_CONNECTOR_POLL_HPD;
-		else if (connector->connector_type == DRM_MODE_CONNECTOR_DVID ||
-			 spare_crtc)
-			connector->polled = DRM_CONNECTOR_POLL_CONNECT;
-		break;
-
-	default:
-		break;
-	}
-}
-
 static const struct drm_connector_helper_funcs
 nouveau_connector_helper_funcs = {
 	.get_modes = nouveau_connector_get_modes,
@@ -892,6 +873,9 @@ nouveau_connector_create(struct drm_device *dev, int index)
 	case DCB_CONNECTOR_TV_1:
 	case DCB_CONNECTOR_TV_3:
 		nv_connector->scaling_mode = DRM_MODE_SCALE_NONE;
+
+		if (nv_gf4_disp_arch(dev))
+			connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 		break;
 	default:
 		nv_connector->scaling_mode = DRM_MODE_SCALE_FULLSCREEN;
@@ -903,11 +887,14 @@ nouveau_connector_create(struct drm_device *dev, int index)
 				dev->mode_config.dithering_mode_property,
 				nv_connector->use_dithering ?
 				DRM_MODE_DITHERING_ON : DRM_MODE_DITHERING_OFF);
+
+		if (dev_priv->card_type >= NV_50)
+			connector->polled = DRM_CONNECTOR_POLL_HPD;
+		else
+			connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 		break;
 	}
 
-	nouveau_connector_set_polling(connector);
-
 	drm_sysfs_connector_add(connector);
 	dcb->drm = connector;
 	return dcb->drm;
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.h b/drivers/gpu/drm/nouveau/nouveau_connector.h
index c21ed6b16f88..711b1e9203af 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.h
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.h
@@ -52,9 +52,6 @@ static inline struct nouveau_connector *nouveau_connector(
 struct drm_connector *
 nouveau_connector_create(struct drm_device *, int index);
 
-void
-nouveau_connector_set_polling(struct drm_connector *);
-
 int
 nouveau_connector_bpp(struct drm_connector *);
 
diff --git a/drivers/gpu/drm/nouveau/nv04_crtc.c b/drivers/gpu/drm/nouveau/nv04_crtc.c
index 5b49cec528ee..40e180741629 100644
--- a/drivers/gpu/drm/nouveau/nv04_crtc.c
+++ b/drivers/gpu/drm/nouveau/nv04_crtc.c
@@ -158,7 +158,6 @@ nv_crtc_dpms(struct drm_crtc *crtc, int mode)
 {
 	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
-	struct drm_connector *connector;
 	unsigned char seq1 = 0, crtc17 = 0;
 	unsigned char crtc1A;
 
@@ -213,10 +212,6 @@ nv_crtc_dpms(struct drm_crtc *crtc, int mode)
 	NVVgaSeqReset(dev, nv_crtc->index, false);
 
 	NVWriteVgaCrtc(dev, nv_crtc->index, NV_CIO_CRE_RPC1_INDEX, crtc1A);
-
-	/* Update connector polling modes */
-	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
-		nouveau_connector_set_polling(connector);
 }
 
 static bool

From 06ef3e61dd44f76fef89d8e7ad5d6c845f3f345e Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Sat, 23 Oct 2010 23:12:37 +0200
Subject: [PATCH 0722/1066] drm/nouveau: Don't poll LVDS outputs.

Reported-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_connector.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 9ec2b8a81344..1dd52dbfad46 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -888,10 +888,12 @@ nouveau_connector_create(struct drm_device *dev, int index)
 				nv_connector->use_dithering ?
 				DRM_MODE_DITHERING_ON : DRM_MODE_DITHERING_OFF);
 
-		if (dev_priv->card_type >= NV_50)
-			connector->polled = DRM_CONNECTOR_POLL_HPD;
-		else
-			connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+		if (dcb->type != DCB_CONNECTOR_LVDS) {
+			if (dev_priv->card_type >= NV_50)
+				connector->polled = DRM_CONNECTOR_POLL_HPD;
+			else
+				connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+		}
 		break;
 	}
 

From 56ac7475350ee646f5f7316abcdf65d3be94da1c Mon Sep 17 00:00:00 2001
From: Ben Skeggs <bskeggs@redhat.com>
Date: Fri, 22 Oct 2010 10:26:24 +1000
Subject: [PATCH 0723/1066] drm/nv50: implement possible workaround for NV86
 PGRAPH TLB flush hang

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_drv.h   |  5 +++
 drivers/gpu/drm/nouveau/nouveau_mem.c   | 14 +++----
 drivers/gpu/drm/nouveau/nouveau_sgdma.c |  8 ++--
 drivers/gpu/drm/nouveau/nouveau_state.c | 10 +++++
 drivers/gpu/drm/nouveau/nv50_fifo.c     |  5 +++
 drivers/gpu/drm/nouveau/nv50_graph.c    | 52 +++++++++++++++++++++++++
 drivers/gpu/drm/nouveau/nv50_instmem.c  |  1 -
 7 files changed, 82 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 60a54fae90c1..10a8d4e78e58 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -307,6 +307,7 @@ struct nouveau_fifo_engine {
 	void (*destroy_context)(struct nouveau_channel *);
 	int  (*load_context)(struct nouveau_channel *);
 	int  (*unload_context)(struct drm_device *);
+	void (*tlb_flush)(struct drm_device *dev);
 };
 
 struct nouveau_pgraph_object_method {
@@ -339,6 +340,7 @@ struct nouveau_pgraph_engine {
 	void (*destroy_context)(struct nouveau_channel *);
 	int  (*load_context)(struct nouveau_channel *);
 	int  (*unload_context)(struct drm_device *);
+	void (*tlb_flush)(struct drm_device *dev);
 
 	void (*set_region_tiling)(struct drm_device *dev, int i, uint32_t addr,
 				  uint32_t size, uint32_t pitch);
@@ -1014,6 +1016,7 @@ extern int  nv50_fifo_create_context(struct nouveau_channel *);
 extern void nv50_fifo_destroy_context(struct nouveau_channel *);
 extern int  nv50_fifo_load_context(struct nouveau_channel *);
 extern int  nv50_fifo_unload_context(struct drm_device *);
+extern void nv50_fifo_tlb_flush(struct drm_device *dev);
 
 /* nvc0_fifo.c */
 extern int  nvc0_fifo_init(struct drm_device *);
@@ -1091,6 +1094,8 @@ extern int  nv50_graph_load_context(struct nouveau_channel *);
 extern int  nv50_graph_unload_context(struct drm_device *);
 extern void nv50_graph_context_switch(struct drm_device *);
 extern int  nv50_grctx_init(struct nouveau_grctx *);
+extern void nv50_graph_tlb_flush(struct drm_device *dev);
+extern void nv86_graph_tlb_flush(struct drm_device *dev);
 
 /* nvc0_graph.c */
 extern int  nvc0_graph_init(struct drm_device *);
diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c
index 1165c3e68200..ac3bec024fd5 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mem.c
@@ -175,11 +175,10 @@ nv50_mem_vm_bind_linear(struct drm_device *dev, uint64_t virt, uint32_t size,
 			}
 		}
 	}
-	dev_priv->engine.instmem.flush(dev);
 
-	nv50_vm_flush(dev, 5);
-	nv50_vm_flush(dev, 0);
-	nv50_vm_flush(dev, 4);
+	dev_priv->engine.instmem.flush(dev);
+	dev_priv->engine.fifo.tlb_flush(dev);
+	dev_priv->engine.graph.tlb_flush(dev);
 	nv50_vm_flush(dev, 6);
 	return 0;
 }
@@ -209,11 +208,10 @@ nv50_mem_vm_unbind(struct drm_device *dev, uint64_t virt, uint32_t size)
 			pte++;
 		}
 	}
-	dev_priv->engine.instmem.flush(dev);
 
-	nv50_vm_flush(dev, 5);
-	nv50_vm_flush(dev, 0);
-	nv50_vm_flush(dev, 4);
+	dev_priv->engine.instmem.flush(dev);
+	dev_priv->engine.fifo.tlb_flush(dev);
+	dev_priv->engine.graph.tlb_flush(dev);
 	nv50_vm_flush(dev, 6);
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
index 15f358404645..0b309c1cc3d7 100644
--- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c
+++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
@@ -120,8 +120,8 @@ nouveau_sgdma_bind(struct ttm_backend *be, struct ttm_mem_reg *mem)
 	dev_priv->engine.instmem.flush(nvbe->dev);
 
 	if (dev_priv->card_type == NV_50) {
-		nv50_vm_flush(dev, 5); /* PGRAPH */
-		nv50_vm_flush(dev, 0); /* PFIFO */
+		dev_priv->engine.fifo.tlb_flush(dev);
+		dev_priv->engine.graph.tlb_flush(dev);
 	}
 
 	nvbe->bound = true;
@@ -162,8 +162,8 @@ nouveau_sgdma_unbind(struct ttm_backend *be)
 	dev_priv->engine.instmem.flush(nvbe->dev);
 
 	if (dev_priv->card_type == NV_50) {
-		nv50_vm_flush(dev, 5);
-		nv50_vm_flush(dev, 0);
+		dev_priv->engine.fifo.tlb_flush(dev);
+		dev_priv->engine.graph.tlb_flush(dev);
 	}
 
 	nvbe->bound = false;
diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index ea3452194cd6..049f755567e5 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -354,6 +354,15 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->graph.destroy_context	= nv50_graph_destroy_context;
 		engine->graph.load_context	= nv50_graph_load_context;
 		engine->graph.unload_context	= nv50_graph_unload_context;
+		if (dev_priv->chipset != 0x86)
+			engine->graph.tlb_flush	= nv50_graph_tlb_flush;
+		else {
+			/* from what i can see nvidia do this on every
+			 * pre-NVA3 board except NVAC, but, we've only
+			 * ever seen problems on NV86
+			 */
+			engine->graph.tlb_flush	= nv86_graph_tlb_flush;
+		}
 		engine->fifo.channels		= 128;
 		engine->fifo.init		= nv50_fifo_init;
 		engine->fifo.takedown		= nv50_fifo_takedown;
@@ -365,6 +374,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->fifo.destroy_context	= nv50_fifo_destroy_context;
 		engine->fifo.load_context	= nv50_fifo_load_context;
 		engine->fifo.unload_context	= nv50_fifo_unload_context;
+		engine->fifo.tlb_flush		= nv50_fifo_tlb_flush;
 		engine->display.early_init	= nv50_display_early_init;
 		engine->display.late_takedown	= nv50_display_late_takedown;
 		engine->display.create		= nv50_display_create;
diff --git a/drivers/gpu/drm/nouveau/nv50_fifo.c b/drivers/gpu/drm/nouveau/nv50_fifo.c
index a46a961102f3..1da65bd60c10 100644
--- a/drivers/gpu/drm/nouveau/nv50_fifo.c
+++ b/drivers/gpu/drm/nouveau/nv50_fifo.c
@@ -464,3 +464,8 @@ nv50_fifo_unload_context(struct drm_device *dev)
 	return 0;
 }
 
+void
+nv50_fifo_tlb_flush(struct drm_device *dev)
+{
+	nv50_vm_flush(dev, 5);
+}
diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c
index cbf5ae2f67d4..8b669d0af610 100644
--- a/drivers/gpu/drm/nouveau/nv50_graph.c
+++ b/drivers/gpu/drm/nouveau/nv50_graph.c
@@ -402,3 +402,55 @@ struct nouveau_pgraph_object_class nv50_graph_grclass[] = {
 	{ 0x8597, false, NULL }, /* tesla (nva3, nva5, nva8) */
 	{}
 };
+
+void
+nv50_graph_tlb_flush(struct drm_device *dev)
+{
+	nv50_vm_flush(dev, 0);
+}
+
+void
+nv86_graph_tlb_flush(struct drm_device *dev)
+{
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_timer_engine *ptimer = &dev_priv->engine.timer;
+	bool idle, timeout = false;
+	unsigned long flags;
+	u64 start;
+	u32 tmp;
+
+	spin_lock_irqsave(&dev_priv->context_switch_lock, flags);
+	nv_mask(dev, 0x400500, 0x00000001, 0x00000000);
+
+	start = ptimer->read(dev);
+	do {
+		idle = true;
+
+		for (tmp = nv_rd32(dev, 0x400380); tmp && idle; tmp >>= 3) {
+			if ((tmp & 7) == 1)
+				idle = false;
+		}
+
+		for (tmp = nv_rd32(dev, 0x400384); tmp && idle; tmp >>= 3) {
+			if ((tmp & 7) == 1)
+				idle = false;
+		}
+
+		for (tmp = nv_rd32(dev, 0x400388); tmp && idle; tmp >>= 3) {
+			if ((tmp & 7) == 1)
+				idle = false;
+		}
+	} while (!idle && !(timeout = ptimer->read(dev) - start > 2000000000));
+
+	if (timeout) {
+		NV_ERROR(dev, "PGRAPH TLB flush idle timeout fail: "
+			      "0x%08x 0x%08x 0x%08x 0x%08x\n",
+			 nv_rd32(dev, 0x400700), nv_rd32(dev, 0x400380),
+			 nv_rd32(dev, 0x400384), nv_rd32(dev, 0x400388));
+	}
+
+	nv50_vm_flush(dev, 0);
+
+	nv_mask(dev, 0x400500, 0x00000001, 0x00000001);
+	spin_unlock_irqrestore(&dev_priv->context_switch_lock, flags);
+}
diff --git a/drivers/gpu/drm/nouveau/nv50_instmem.c b/drivers/gpu/drm/nouveau/nv50_instmem.c
index a53fc974332b..b773229b7647 100644
--- a/drivers/gpu/drm/nouveau/nv50_instmem.c
+++ b/drivers/gpu/drm/nouveau/nv50_instmem.c
@@ -402,7 +402,6 @@ nv50_instmem_bind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj)
 	}
 	dev_priv->engine.instmem.flush(dev);
 
-	nv50_vm_flush(dev, 4);
 	nv50_vm_flush(dev, 6);
 
 	gpuobj->im_bound = 1;

From 63d6fd32889c46fa40cd1631fb2a0162187311ab Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Mon, 25 Oct 2010 02:13:21 +0200
Subject: [PATCH 0724/1066] drm/nv10-nv20: Fix instability after MPLL changes.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nv04_pm.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nv04_pm.c b/drivers/gpu/drm/nouveau/nv04_pm.c
index 6a6eb697d38e..eb1c70dd82ed 100644
--- a/drivers/gpu/drm/nouveau/nv04_pm.c
+++ b/drivers/gpu/drm/nouveau/nv04_pm.c
@@ -76,6 +76,15 @@ nv04_pm_clock_set(struct drm_device *dev, void *pre_state)
 		reg += 4;
 
 	nouveau_hw_setpll(dev, reg, &state->calc);
+
+	if (dev_priv->card_type < NV_30 && reg == NV_PRAMDAC_MPLL_COEFF) {
+		if (dev_priv->card_type == NV_20)
+			nv_mask(dev, 0x1002c4, 0, 1 << 20);
+
+		/* Reset the DLLs */
+		nv_mask(dev, 0x1002c0, 0, 1 << 8);
+	}
+
 	kfree(state);
 }
 

From 84b8081c2baf84b52ac9bf79f07edcea975ab0b5 Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Tue, 26 Oct 2010 02:17:56 +0200
Subject: [PATCH 0725/1066] drm/nouveau: Don't use load detection for connector
 polling.

Analog output polling makes GL programs jerky when pageflip is being
used because it's carried out with the mode_config mutex held.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_connector.c | 25 ++-------------------
 1 file changed, 2 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 1dd52dbfad46..52c356e9a3d1 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -213,24 +213,6 @@ nouveau_connector_set_encoder(struct drm_connector *connector,
 	}
 }
 
-static bool
-nouveau_connector_poll_allowed(struct drm_connector *connector)
-{
-	struct drm_device *dev = connector->dev;
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct drm_crtc *crtc;
-	bool spare_crtc = false;
-
-	if (dev_priv->card_type >= NV_50) {
-		return true;
-	} else {
-		list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
-			spare_crtc |= !crtc->enabled;
-
-		return spare_crtc;
-	}
-}
-
 static enum drm_connector_status
 nouveau_connector_detect(struct drm_connector *connector, bool force)
 {
@@ -299,8 +281,7 @@ detect_analog:
 	nv_encoder = find_encoder_by_type(connector, OUTPUT_ANALOG);
 	if (!nv_encoder && !nouveau_tv_disable)
 		nv_encoder = find_encoder_by_type(connector, OUTPUT_TV);
-	if (nv_encoder &&
-	    (force || nouveau_connector_poll_allowed(connector))) {
+	if (nv_encoder && force) {
 		struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
 		struct drm_encoder_helper_funcs *helper =
 						encoder->helper_private;
@@ -868,14 +849,12 @@ nouveau_connector_create(struct drm_device *dev, int index)
 					dev->mode_config.scaling_mode_property,
 					nv_connector->scaling_mode);
 		}
+		connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 		/* fall-through */
 	case DCB_CONNECTOR_TV_0:
 	case DCB_CONNECTOR_TV_1:
 	case DCB_CONNECTOR_TV_3:
 		nv_connector->scaling_mode = DRM_MODE_SCALE_NONE;
-
-		if (nv_gf4_disp_arch(dev))
-			connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 		break;
 	default:
 		nv_connector->scaling_mode = DRM_MODE_SCALE_FULLSCREEN;

From b54262f3c828ee17e27632d0d60255281c02e1a5 Mon Sep 17 00:00:00 2001
From: Martin Peres <martin.peres@ensi-bourges.fr>
Date: Tue, 26 Oct 2010 12:48:28 +0200
Subject: [PATCH 0726/1066] drm/nouveau: Fix compilation issues in nouveau_pm
 when CONFIG_HWMON is not set

Signed-off-by: Martin Peres <martin.peres@ensi-bourges.fr>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_pm.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.c b/drivers/gpu/drm/nouveau/nouveau_pm.c
index 1c99c55d6d46..9f7b158f5825 100644
--- a/drivers/gpu/drm/nouveau/nouveau_pm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_pm.c
@@ -284,6 +284,7 @@ nouveau_sysfs_fini(struct drm_device *dev)
 	}
 }
 
+#ifdef CONFIG_HWMON
 static ssize_t
 nouveau_hwmon_show_temp(struct device *d, struct device_attribute *a, char *buf)
 {
@@ -395,10 +396,12 @@ static struct attribute *hwmon_attributes[] = {
 static const struct attribute_group hwmon_attrgroup = {
 	.attrs = hwmon_attributes,
 };
+#endif
 
 static int
 nouveau_hwmon_init(struct drm_device *dev)
 {
+#ifdef CONFIG_HWMON
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
 	struct device *hwmon_dev;
@@ -425,13 +428,14 @@ nouveau_hwmon_init(struct drm_device *dev)
 	}
 
 	pm->hwmon = hwmon_dev;
-
+#endif
 	return 0;
 }
 
 static void
 nouveau_hwmon_fini(struct drm_device *dev)
 {
+#ifdef CONFIG_HWMON
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
 
@@ -439,6 +443,7 @@ nouveau_hwmon_fini(struct drm_device *dev)
 		sysfs_remove_group(&pm->hwmon->kobj, &hwmon_attrgroup);
 		hwmon_device_unregister(pm->hwmon);
 	}
+#endif
 }
 
 int

From dd661e5f4e87609e7a9b4cbdff305dca7f494e7b Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Mon, 1 Nov 2010 18:06:28 +0100
Subject: [PATCH 0727/1066] drm/nouveau: Return error from nouveau_gpuobj_new
 if we're out of RAMIN.

Reported-by: Tomas Miljenovic <tomasmiljenovic@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_object.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_object.c b/drivers/gpu/drm/nouveau/nouveau_object.c
index 896cf8634144..dd572adca02a 100644
--- a/drivers/gpu/drm/nouveau/nouveau_object.c
+++ b/drivers/gpu/drm/nouveau/nouveau_object.c
@@ -129,7 +129,7 @@ nouveau_gpuobj_new(struct drm_device *dev, struct nouveau_channel *chan,
 			if (ramin == NULL) {
 				spin_unlock(&dev_priv->ramin_lock);
 				nouveau_gpuobj_ref(NULL, &gpuobj);
-				return ret;
+				return -ENOMEM;
 			}
 
 			ramin = drm_mm_get_block_atomic(ramin, size, align);

From 9d5a6c4353eeac1e0095e731a0a746254f23af83 Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Mon, 1 Nov 2010 18:08:26 +0100
Subject: [PATCH 0728/1066] drm/nouveau: Make PCIE GART size depend on the
 available RAMIN space.

Reported-by: Tomas Miljenovic <tomasmiljenovic@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_sgdma.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
index 0b309c1cc3d7..d4ac97007038 100644
--- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c
+++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
@@ -224,11 +224,11 @@ nouveau_sgdma_init(struct drm_device *dev)
 	int i, ret;
 
 	if (dev_priv->card_type < NV_50) {
-		if(dev_priv->card_type < NV_40) {
-			aper_size = (64 * 1024 * 1024);
-		} else {
-			aper_size = (512 * 1024 * 1024);
-		}
+		if(dev_priv->ramin_rsvd_vram < 2 * 1024 * 1024)
+			aper_size = 64 * 1024 * 1024;
+		else
+			aper_size = 512 * 1024 * 1024;
+
 		obj_size  = (aper_size >> NV_CTXDMA_PAGE_SHIFT) * 4;
 		obj_size += 8; /* ctxdma header */
 	} else {

From cac8f05b4294d18cfa940511c286ca03aa6590ad Mon Sep 17 00:00:00 2001
From: Roy Spliet <r.spliet@student.tudelft.nl>
Date: Wed, 20 Oct 2010 01:09:56 +0200
Subject: [PATCH 0729/1066] drm/nouveau/pm: improve memtiming mappings

Improvements:
 - Fix bug in switch statement
 - Add parts of 0x10022c, 0x10023c
 - Clean up 0x100234
 - Comment out assumption in 0x100228 until verified

Signed-off-by: Roy Spliet <r.spliet@student.tudelft.nl>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_mem.c | 31 ++++++++++++++++-----------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c
index ac3bec024fd5..fe4a30dc4b42 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mem.c
@@ -651,6 +651,7 @@ nouveau_mem_gart_init(struct drm_device *dev)
 void
 nouveau_mem_timing_init(struct drm_device *dev)
 {
+	/* cards < NVC0 only */
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
 	struct nouveau_pm_memtimings *memtimings = &pm->memtimings;
@@ -717,14 +718,14 @@ nouveau_mem_timing_init(struct drm_device *dev)
 		tUNK_19 = 1;
 		tUNK_20 = 0;
 		tUNK_21 = 0;
-		switch (min(recordlen, 21)) {
-		case 21:
+		switch (min(recordlen, 22)) {
+		case 22:
 			tUNK_21 = entry[21];
-		case 20:
+		case 21:
 			tUNK_20 = entry[20];
-		case 19:
+		case 20:
 			tUNK_19 = entry[19];
-		case 18:
+		case 19:
 			tUNK_18 = entry[18];
 		default:
 			tUNK_0  = entry[0];
@@ -754,24 +755,30 @@ nouveau_mem_timing_init(struct drm_device *dev)
 		timing->reg_100228 = (tUNK_12 << 16 | tUNK_11 << 8 | tUNK_10);
 		if(recordlen > 19) {
 			timing->reg_100228 += (tUNK_19 - 1) << 24;
-		} else {
+		}/* I cannot back-up this else-statement right now
+			 else {
 			timing->reg_100228 += tUNK_12 << 24;
-		}
+		}*/
 
 		/* XXX: reg_10022c */
+		timing->reg_10022c = tUNK_2 - 1;
 
 		timing->reg_100230 = (tUNK_20 << 24 | tUNK_21 << 16 |
 				      tUNK_13 << 8  | tUNK_13);
 
 		/* XXX: +6? */
 		timing->reg_100234 = (tRAS << 24 | (tUNK_19 + 6) << 8 | tRC);
-		if(tUNK_10 > tUNK_11) {
-			timing->reg_100234 += tUNK_10 << 16;
-		} else {
-			timing->reg_100234 += tUNK_11 << 16;
+		timing->reg_100234 += max(tUNK_10,tUNK_11) << 16;
+
+		/* XXX; reg_100238, reg_10023c
+		 * reg: 0x00??????
+		 * reg_10023c:
+		 *      0 for pre-NV50 cards
+		 *      0x????0202 for NV50+ cards (empirical evidence) */
+		if(dev_priv->card_type >= NV_50) {
+			timing->reg_10023c = 0x202;
 		}
 
-		/* XXX; reg_100238, reg_10023c */
 		NV_DEBUG(dev, "Entry %d: 220: %08x %08x %08x %08x\n", i,
 			 timing->reg_100220, timing->reg_100224,
 			 timing->reg_100228, timing->reg_10022c);

From 5bead799d3f8f1500c4b59301b8a2732a92f559f Mon Sep 17 00:00:00 2001
From: Ben Skeggs <bskeggs@redhat.com>
Date: Thu, 4 Nov 2010 09:56:12 +1000
Subject: [PATCH 0730/1066] drm/nouveau: don't expose backlight control when
 available through ACPI

Avoid confusing userspace by not publishing backlight controls if ACPI
equivalents are available.

Reported-by: Aaron Sowry <aaron@aeneby.se>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_backlight.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c b/drivers/gpu/drm/nouveau/nouveau_backlight.c
index 406228f4a2a0..b14c81110575 100644
--- a/drivers/gpu/drm/nouveau/nouveau_backlight.c
+++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c
@@ -31,6 +31,7 @@
  */
 
 #include <linux/backlight.h>
+#include <linux/acpi.h>
 
 #include "drmP.h"
 #include "nouveau_drv.h"
@@ -136,6 +137,14 @@ int nouveau_backlight_init(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 
+#ifdef CONFIG_ACPI
+	if (acpi_video_backlight_support()) {
+		NV_INFO(dev, "ACPI backlight interface available, "
+			     "not registering our own\n");
+		return 0;
+	}
+#endif
+
 	switch (dev_priv->card_type) {
 	case NV_40:
 		return nouveau_nv40_backlight_init(dev);

From c1b60ece91460214b5135360a375f3f6fbb59608 Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Thu, 11 Nov 2010 00:56:37 +0100
Subject: [PATCH 0731/1066] drm/nouveau: Fix a few confusions between "chipset"
 and "card_type".

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_bios.c | 2 +-
 drivers/gpu/drm/nouveau/nouveau_i2c.c  | 2 +-
 drivers/gpu/drm/nouveau/nouveau_temp.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index 5f21030a293b..b2293576f278 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -6829,7 +6829,7 @@ nouveau_bios_posted(struct drm_device *dev)
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	unsigned htotal;
 
-	if (dev_priv->chipset >= NV_50) {
+	if (dev_priv->card_type >= NV_50) {
 		if (NVReadVgaCrtc(dev, 0, 0x00) == 0 &&
 		    NVReadVgaCrtc(dev, 0, 0x1a) == 0)
 			return false;
diff --git a/drivers/gpu/drm/nouveau/nouveau_i2c.c b/drivers/gpu/drm/nouveau/nouveau_i2c.c
index fdd7e3de79c8..cb389d014326 100644
--- a/drivers/gpu/drm/nouveau/nouveau_i2c.c
+++ b/drivers/gpu/drm/nouveau/nouveau_i2c.c
@@ -256,7 +256,7 @@ nouveau_i2c_find(struct drm_device *dev, int index)
 	if (index >= DCB_MAX_NUM_I2C_ENTRIES)
 		return NULL;
 
-	if (dev_priv->chipset >= NV_50 && (i2c->entry & 0x00000100)) {
+	if (dev_priv->card_type >= NV_50 && (i2c->entry & 0x00000100)) {
 		uint32_t reg = 0xe500, val;
 
 		if (i2c->port_type == 6) {
diff --git a/drivers/gpu/drm/nouveau/nouveau_temp.c b/drivers/gpu/drm/nouveau/nouveau_temp.c
index 16bbbf1eff63..7ecc4adc1e45 100644
--- a/drivers/gpu/drm/nouveau/nouveau_temp.c
+++ b/drivers/gpu/drm/nouveau/nouveau_temp.c
@@ -191,7 +191,7 @@ nv40_temp_get(struct drm_device *dev)
 	int offset = sensor->offset_mult / sensor->offset_div;
 	int core_temp;
 
-	if (dev_priv->chipset >= 0x50) {
+	if (dev_priv->card_type >= NV_50) {
 		core_temp = nv_rd32(dev, 0x20008);
 	} else {
 		core_temp = nv_rd32(dev, 0x0015b4) & 0x1fff;

From ab838338a2a9e0cb8346eb0cab9977be13e8dce5 Mon Sep 17 00:00:00 2001
From: Andy Lutomirski <luto@mit.edu>
Date: Tue, 16 Nov 2010 18:40:52 -0500
Subject: [PATCH 0732/1066] nouveau: Acknowledge HPD irq in handler, not bottom
 half

The old code generated an interrupt storm bad enough to completely
take down my system.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_drv.h  |  6 +++++
 drivers/gpu/drm/nouveau/nouveau_irq.c  |  1 +
 drivers/gpu/drm/nouveau/nv50_display.c | 35 +++++++++++++++++++-------
 3 files changed, 33 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 10a8d4e78e58..1c7db64c03bf 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -584,6 +584,12 @@ struct drm_nouveau_private {
 	struct work_struct irq_work;
 	struct work_struct hpd_work;
 
+	struct {
+		spinlock_t lock;
+		uint32_t hpd0_bits;
+		uint32_t hpd1_bits;
+	} hpd_state;
+
 	struct list_head vbl_waiting;
 
 	struct {
diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c
index e2f2d59be3ea..7bfd9e6c9d67 100644
--- a/drivers/gpu/drm/nouveau/nouveau_irq.c
+++ b/drivers/gpu/drm/nouveau/nouveau_irq.c
@@ -60,6 +60,7 @@ nouveau_irq_preinstall(struct drm_device *dev)
 	if (dev_priv->card_type >= NV_50) {
 		INIT_WORK(&dev_priv->irq_work, nv50_display_irq_handler_bh);
 		INIT_WORK(&dev_priv->hpd_work, nv50_display_irq_hotplug_bh);
+		spin_lock_init(&dev_priv->hpd_state.lock);
 		INIT_LIST_HEAD(&dev_priv->vbl_waiting);
 	}
 }
diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c
index 55c9663ef2bf..f624c611ddea 100644
--- a/drivers/gpu/drm/nouveau/nv50_display.c
+++ b/drivers/gpu/drm/nouveau/nv50_display.c
@@ -1032,11 +1032,18 @@ nv50_display_irq_hotplug_bh(struct work_struct *work)
 	struct drm_connector *connector;
 	const uint32_t gpio_reg[4] = { 0xe104, 0xe108, 0xe280, 0xe284 };
 	uint32_t unplug_mask, plug_mask, change_mask;
-	uint32_t hpd0, hpd1 = 0;
+	uint32_t hpd0, hpd1;
 
-	hpd0 = nv_rd32(dev, 0xe054) & nv_rd32(dev, 0xe050);
+	spin_lock_irq(&dev_priv->hpd_state.lock);
+	hpd0 = dev_priv->hpd_state.hpd0_bits;
+	dev_priv->hpd_state.hpd0_bits = 0;
+	hpd1 = dev_priv->hpd_state.hpd1_bits;
+	dev_priv->hpd_state.hpd1_bits = 0;
+	spin_unlock_irq(&dev_priv->hpd_state.lock);
+
+	hpd0 &= nv_rd32(dev, 0xe050);
 	if (dev_priv->chipset >= 0x90)
-		hpd1 = nv_rd32(dev, 0xe074) & nv_rd32(dev, 0xe070);
+		hpd1 &= nv_rd32(dev, 0xe070);
 
 	plug_mask   = (hpd0 & 0x0000ffff) | (hpd1 << 16);
 	unplug_mask = (hpd0 >> 16) | (hpd1 & 0xffff0000);
@@ -1078,10 +1085,6 @@ nv50_display_irq_hotplug_bh(struct work_struct *work)
 			helper->dpms(connector->encoder, DRM_MODE_DPMS_OFF);
 	}
 
-	nv_wr32(dev, 0xe054, nv_rd32(dev, 0xe054));
-	if (dev_priv->chipset >= 0x90)
-		nv_wr32(dev, 0xe074, nv_rd32(dev, 0xe074));
-
 	drm_helper_hpd_irq_event(dev);
 }
 
@@ -1092,8 +1095,22 @@ nv50_display_irq_handler(struct drm_device *dev)
 	uint32_t delayed = 0;
 
 	if (nv_rd32(dev, NV50_PMC_INTR_0) & NV50_PMC_INTR_0_HOTPLUG) {
-		if (!work_pending(&dev_priv->hpd_work))
-			queue_work(dev_priv->wq, &dev_priv->hpd_work);
+		uint32_t hpd0_bits, hpd1_bits = 0;
+
+		hpd0_bits = nv_rd32(dev, 0xe054);
+		nv_wr32(dev, 0xe054, hpd0_bits);
+
+		if (dev_priv->chipset >= 0x90) {
+			hpd1_bits = nv_rd32(dev, 0xe074);
+			nv_wr32(dev, 0xe074, hpd1_bits);
+		}
+
+		spin_lock(&dev_priv->hpd_state.lock);
+		dev_priv->hpd_state.hpd0_bits |= hpd0_bits;
+		dev_priv->hpd_state.hpd1_bits |= hpd1_bits;
+		spin_unlock(&dev_priv->hpd_state.lock);
+
+		queue_work(dev_priv->wq, &dev_priv->hpd_work);
 	}
 
 	while (nv_rd32(dev, NV50_PMC_INTR_0) & NV50_PMC_INTR_0_DISPLAY) {

From 16790569eddf4d406a16a65f4750f405fa669c52 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Sun, 14 Nov 2010 20:24:35 -0500
Subject: [PATCH 0733/1066] drm/radeon/kms: fix and unify tiled buffer
 alignment checking for r6xx/7xx

Tiled buffers have the same alignment requirements regardless of
whether the surface is for db, cb, or textures.  Previously, the
calculations where inconsistent for each buffer type.

- Unify the alignment calculations in a common function
- Standardize the alignment units (pixels for pitch/height/depth,
bytes for base)
- properly check the buffer base alignments

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/r600_cs.c | 309 +++++++++++++++++++------------
 drivers/gpu/drm/radeon/r600d.h   |   6 +
 2 files changed, 199 insertions(+), 116 deletions(-)

diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 37cc2aa9f923..0f90fc3482ce 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -50,6 +50,7 @@ struct r600_cs_track {
 	u32			nsamples;
 	u32			cb_color_base_last[8];
 	struct radeon_bo	*cb_color_bo[8];
+	u64			cb_color_bo_mc[8];
 	u32			cb_color_bo_offset[8];
 	struct radeon_bo	*cb_color_frag_bo[8];
 	struct radeon_bo	*cb_color_tile_bo[8];
@@ -67,6 +68,7 @@ struct r600_cs_track {
 	u32			db_depth_size;
 	u32			db_offset;
 	struct radeon_bo	*db_bo;
+	u64			db_bo_mc;
 };
 
 static inline int r600_bpe_from_format(u32 *bpe, u32 format)
@@ -140,6 +142,68 @@ static inline int r600_bpe_from_format(u32 *bpe, u32 format)
 	return 0;
 }
 
+struct array_mode_checker {
+	int array_mode;
+	u32 group_size;
+	u32 nbanks;
+	u32 npipes;
+	u32 nsamples;
+	u32 bpe;
+};
+
+/* returns alignment in pixels for pitch/height/depth and bytes for base */
+static inline int r600_get_array_mode_alignment(struct array_mode_checker *values,
+						u32 *pitch_align,
+						u32 *height_align,
+						u32 *depth_align,
+						u64 *base_align)
+{
+	u32 tile_width = 8;
+	u32 tile_height = 8;
+	u32 macro_tile_width = values->nbanks;
+	u32 macro_tile_height = values->npipes;
+	u32 tile_bytes = tile_width * tile_height * values->bpe * values->nsamples;
+	u32 macro_tile_bytes = macro_tile_width * macro_tile_height * tile_bytes;
+
+	switch (values->array_mode) {
+	case ARRAY_LINEAR_GENERAL:
+		/* technically tile_width/_height for pitch/height */
+		*pitch_align = 1; /* tile_width */
+		*height_align = 1; /* tile_height */
+		*depth_align = 1;
+		*base_align = 1;
+		break;
+	case ARRAY_LINEAR_ALIGNED:
+		*pitch_align = max((u32)64, (u32)(values->group_size / values->bpe));
+		*height_align = tile_height;
+		*depth_align = 1;
+		*base_align = values->group_size;
+		break;
+	case ARRAY_1D_TILED_THIN1:
+		*pitch_align = max((u32)tile_width,
+				   (u32)(values->group_size /
+					 (tile_height * values->bpe * values->nsamples)));
+		*height_align = tile_height;
+		*depth_align = 1;
+		*base_align = values->group_size;
+		break;
+	case ARRAY_2D_TILED_THIN1:
+		*pitch_align = max((u32)macro_tile_width,
+				  (u32)(((values->group_size / tile_height) /
+					 (values->bpe * values->nsamples)) *
+					values->nbanks)) * tile_width;
+		*height_align = macro_tile_height * tile_height;
+		*depth_align = 1;
+		*base_align = max(macro_tile_bytes,
+				  (*pitch_align) * values->bpe * (*height_align) * values->nsamples);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static void r600_cs_track_init(struct r600_cs_track *track)
 {
 	int i;
@@ -153,10 +217,12 @@ static void r600_cs_track_init(struct r600_cs_track *track)
 		track->cb_color_info[i] = 0;
 		track->cb_color_bo[i] = NULL;
 		track->cb_color_bo_offset[i] = 0xFFFFFFFF;
+		track->cb_color_bo_mc[i] = 0xFFFFFFFF;
 	}
 	track->cb_target_mask = 0xFFFFFFFF;
 	track->cb_shader_mask = 0xFFFFFFFF;
 	track->db_bo = NULL;
+	track->db_bo_mc = 0xFFFFFFFF;
 	/* assume the biggest format and that htile is enabled */
 	track->db_depth_info = 7 | (1 << 25);
 	track->db_depth_view = 0xFFFFC000;
@@ -168,7 +234,10 @@ static void r600_cs_track_init(struct r600_cs_track *track)
 static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
 {
 	struct r600_cs_track *track = p->track;
-	u32 bpe = 0, pitch, slice_tile_max, size, tmp, height, pitch_align;
+	u32 bpe = 0, slice_tile_max, size, tmp;
+	u32 height, height_align, pitch, pitch_align, depth_align;
+	u64 base_offset, base_align;
+	struct array_mode_checker array_check;
 	volatile u32 *ib = p->ib->ptr;
 	unsigned array_mode;
 
@@ -183,60 +252,40 @@ static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
 			i, track->cb_color_info[i]);
 		return -EINVAL;
 	}
-	/* pitch is the number of 8x8 tiles per row */
-	pitch = G_028060_PITCH_TILE_MAX(track->cb_color_size[i]) + 1;
+	/* pitch in pixels */
+	pitch = (G_028060_PITCH_TILE_MAX(track->cb_color_size[i]) + 1) * 8;
 	slice_tile_max = G_028060_SLICE_TILE_MAX(track->cb_color_size[i]) + 1;
 	slice_tile_max *= 64;
-	height = slice_tile_max / (pitch * 8);
+	height = slice_tile_max / pitch;
 	if (height > 8192)
 		height = 8192;
 	array_mode = G_0280A0_ARRAY_MODE(track->cb_color_info[i]);
+
+	base_offset = track->cb_color_bo_mc[i] + track->cb_color_bo_offset[i];
+	array_check.array_mode = array_mode;
+	array_check.group_size = track->group_size;
+	array_check.nbanks = track->nbanks;
+	array_check.npipes = track->npipes;
+	array_check.nsamples = track->nsamples;
+	array_check.bpe = bpe;
+	if (r600_get_array_mode_alignment(&array_check,
+					  &pitch_align, &height_align, &depth_align, &base_align)) {
+		dev_warn(p->dev, "%s invalid tiling %d for %d (0x%08X)\n", __func__,
+			 G_0280A0_ARRAY_MODE(track->cb_color_info[i]), i,
+			 track->cb_color_info[i]);
+		return -EINVAL;
+	}
 	switch (array_mode) {
 	case V_0280A0_ARRAY_LINEAR_GENERAL:
-		/* technically height & 0x7 */
 		break;
 	case V_0280A0_ARRAY_LINEAR_ALIGNED:
-		pitch_align = max((u32)64, (u32)(track->group_size / bpe)) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
-				 __func__, __LINE__, pitch);
-			return -EINVAL;
-		}
-		if (!IS_ALIGNED(height, 8)) {
-			dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
-				 __func__, __LINE__, height);
-			return -EINVAL;
-		}
 		break;
 	case V_0280A0_ARRAY_1D_TILED_THIN1:
-		pitch_align = max((u32)8, (u32)(track->group_size / (8 * bpe * track->nsamples))) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
-				 __func__, __LINE__, pitch);
-			return -EINVAL;
-		}
 		/* avoid breaking userspace */
 		if (height > 7)
 			height &= ~0x7;
-		if (!IS_ALIGNED(height, 8)) {
-			dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
-				 __func__, __LINE__, height);
-			return -EINVAL;
-		}
 		break;
 	case V_0280A0_ARRAY_2D_TILED_THIN1:
-		pitch_align = max((u32)track->nbanks,
-				  (u32)(((track->group_size / 8) / (bpe * track->nsamples)) * track->nbanks)) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
-				__func__, __LINE__, pitch);
-			return -EINVAL;
-		}
-		if (!IS_ALIGNED((height / 8), track->npipes)) {
-			dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
-				 __func__, __LINE__, height);
-			return -EINVAL;
-		}
 		break;
 	default:
 		dev_warn(p->dev, "%s invalid tiling %d for %d (0x%08X)\n", __func__,
@@ -244,8 +293,24 @@ static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
 			track->cb_color_info[i]);
 		return -EINVAL;
 	}
+
+	if (!IS_ALIGNED(pitch, pitch_align)) {
+		dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
+			 __func__, __LINE__, pitch);
+		return -EINVAL;
+	}
+	if (!IS_ALIGNED(height, height_align)) {
+		dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
+			 __func__, __LINE__, height);
+		return -EINVAL;
+	}
+	if (!IS_ALIGNED(base_offset, base_align)) {
+		dev_warn(p->dev, "%s offset[%d] 0x%llx not aligned\n", __func__, i, base_offset);
+		return -EINVAL;
+	}
+
 	/* check offset */
-	tmp = height * pitch * 8 * bpe;
+	tmp = height * pitch * bpe;
 	if ((tmp + track->cb_color_bo_offset[i]) > radeon_bo_size(track->cb_color_bo[i])) {
 		if (array_mode == V_0280A0_ARRAY_LINEAR_GENERAL) {
 			/* the initial DDX does bad things with the CB size occasionally */
@@ -260,15 +325,11 @@ static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
 			return -EINVAL;
 		}
 	}
-	if (!IS_ALIGNED(track->cb_color_bo_offset[i], track->group_size)) {
-		dev_warn(p->dev, "%s offset[%d] %d not aligned\n", __func__, i, track->cb_color_bo_offset[i]);
-		return -EINVAL;
-	}
 	/* limit max tile */
-	tmp = (height * pitch * 8) >> 6;
+	tmp = (height * pitch) >> 6;
 	if (tmp < slice_tile_max)
 		slice_tile_max = tmp;
-	tmp = S_028060_PITCH_TILE_MAX(pitch - 1) |
+	tmp = S_028060_PITCH_TILE_MAX((pitch / 8) - 1) |
 		S_028060_SLICE_TILE_MAX(slice_tile_max - 1);
 	ib[track->cb_color_size_idx[i]] = tmp;
 	return 0;
@@ -310,7 +371,12 @@ static int r600_cs_track_check(struct radeon_cs_parser *p)
 	/* Check depth buffer */
 	if (G_028800_STENCIL_ENABLE(track->db_depth_control) ||
 		G_028800_Z_ENABLE(track->db_depth_control)) {
-		u32 nviews, bpe, ntiles, pitch, pitch_align, height, size, slice_tile_max;
+		u32 nviews, bpe, ntiles, size, slice_tile_max;
+		u32 height, height_align, pitch, pitch_align, depth_align;
+		u64 base_offset, base_align;
+		struct array_mode_checker array_check;
+		int array_mode;
+
 		if (track->db_bo == NULL) {
 			dev_warn(p->dev, "z/stencil with no depth buffer\n");
 			return -EINVAL;
@@ -353,41 +419,34 @@ static int r600_cs_track_check(struct radeon_cs_parser *p)
 			ib[track->db_depth_size_idx] = S_028000_SLICE_TILE_MAX(tmp - 1) | (track->db_depth_size & 0x3FF);
 		} else {
 			size = radeon_bo_size(track->db_bo);
-			pitch = G_028000_PITCH_TILE_MAX(track->db_depth_size) + 1;
+			/* pitch in pixels */
+			pitch = (G_028000_PITCH_TILE_MAX(track->db_depth_size) + 1) * 8;
 			slice_tile_max = G_028000_SLICE_TILE_MAX(track->db_depth_size) + 1;
 			slice_tile_max *= 64;
-			height = slice_tile_max / (pitch * 8);
+			height = slice_tile_max / pitch;
 			if (height > 8192)
 				height = 8192;
-			switch (G_028010_ARRAY_MODE(track->db_depth_info)) {
+			base_offset = track->db_bo_mc + track->db_offset;
+			array_mode = G_028010_ARRAY_MODE(track->db_depth_info);
+			array_check.array_mode = array_mode;
+			array_check.group_size = track->group_size;
+			array_check.nbanks = track->nbanks;
+			array_check.npipes = track->npipes;
+			array_check.nsamples = track->nsamples;
+			array_check.bpe = bpe;
+			if (r600_get_array_mode_alignment(&array_check,
+							  &pitch_align, &height_align, &depth_align, &base_align)) {
+				dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__,
+					 G_028010_ARRAY_MODE(track->db_depth_info),
+					 track->db_depth_info);
+				return -EINVAL;
+			}
+			switch (array_mode) {
 			case V_028010_ARRAY_1D_TILED_THIN1:
-				pitch_align = (max((u32)8, (u32)(track->group_size / (8 * bpe))) / 8);
-				if (!IS_ALIGNED(pitch, pitch_align)) {
-					dev_warn(p->dev, "%s:%d db pitch (%d) invalid\n",
-						 __func__, __LINE__, pitch);
-					return -EINVAL;
-				}
 				/* don't break userspace */
 				height &= ~0x7;
-				if (!IS_ALIGNED(height, 8)) {
-					dev_warn(p->dev, "%s:%d db height (%d) invalid\n",
-						 __func__, __LINE__, height);
-					return -EINVAL;
-				}
 				break;
 			case V_028010_ARRAY_2D_TILED_THIN1:
-				pitch_align = max((u32)track->nbanks,
-						  (u32)(((track->group_size / 8) / bpe) * track->nbanks)) / 8;
-				if (!IS_ALIGNED(pitch, pitch_align)) {
-					dev_warn(p->dev, "%s:%d db pitch (%d) invalid\n",
-						 __func__, __LINE__, pitch);
-					return -EINVAL;
-				}
-				if (!IS_ALIGNED((height / 8), track->npipes)) {
-					dev_warn(p->dev, "%s:%d db height (%d) invalid\n",
-						 __func__, __LINE__, height);
-					return -EINVAL;
-				}
 				break;
 			default:
 				dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__,
@@ -395,15 +454,27 @@ static int r600_cs_track_check(struct radeon_cs_parser *p)
 					 track->db_depth_info);
 				return -EINVAL;
 			}
-			if (!IS_ALIGNED(track->db_offset, track->group_size)) {
-				dev_warn(p->dev, "%s offset[%d] %d not aligned\n", __func__, i, track->db_offset);
+
+			if (!IS_ALIGNED(pitch, pitch_align)) {
+				dev_warn(p->dev, "%s:%d db pitch (%d) invalid\n",
+					 __func__, __LINE__, pitch);
 				return -EINVAL;
 			}
+			if (!IS_ALIGNED(height, height_align)) {
+				dev_warn(p->dev, "%s:%d db height (%d) invalid\n",
+					 __func__, __LINE__, height);
+				return -EINVAL;
+			}
+			if (!IS_ALIGNED(base_offset, base_align)) {
+				dev_warn(p->dev, "%s offset[%d] 0x%llx not aligned\n", __func__, i, base_offset);
+				return -EINVAL;
+			}
+
 			ntiles = G_028000_SLICE_TILE_MAX(track->db_depth_size) + 1;
 			nviews = G_028004_SLICE_MAX(track->db_depth_view) + 1;
 			tmp = ntiles * bpe * 64 * nviews;
 			if ((tmp + track->db_offset) > radeon_bo_size(track->db_bo)) {
-				dev_warn(p->dev, "z/stencil buffer too small (0x%08X %d %d %d -> %d have %ld)\n",
+				dev_warn(p->dev, "z/stencil buffer too small (0x%08X %d %d %d -> %u have %lu)\n",
 						track->db_depth_size, ntiles, nviews, bpe, tmp + track->db_offset,
 						radeon_bo_size(track->db_bo));
 				return -EINVAL;
@@ -954,6 +1025,7 @@ static inline int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx
 		ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
 		track->cb_color_base_last[tmp] = ib[idx];
 		track->cb_color_bo[tmp] = reloc->robj;
+		track->cb_color_bo_mc[tmp] = reloc->lobj.gpu_offset;
 		break;
 	case DB_DEPTH_BASE:
 		r = r600_cs_packet_next_reloc(p, &reloc);
@@ -965,6 +1037,7 @@ static inline int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx
 		track->db_offset = radeon_get_ib_value(p, idx) << 8;
 		ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
 		track->db_bo = reloc->robj;
+		track->db_bo_mc = reloc->lobj.gpu_offset;
 		break;
 	case DB_HTILE_DATA_BASE:
 	case SQ_PGM_START_FS:
@@ -1086,16 +1159,25 @@ static void r600_texture_size(unsigned nfaces, unsigned blevel, unsigned nlevels
 static inline int r600_check_texture_resource(struct radeon_cs_parser *p,  u32 idx,
 					      struct radeon_bo *texture,
 					      struct radeon_bo *mipmap,
+					      u64 base_offset,
+					      u64 mip_offset,
 					      u32 tiling_flags)
 {
 	struct r600_cs_track *track = p->track;
 	u32 nfaces, nlevels, blevel, w0, h0, d0, bpe = 0;
-	u32 word0, word1, l0_size, mipmap_size, pitch, pitch_align;
+	u32 word0, word1, l0_size, mipmap_size;
+	u32 height_align, pitch, pitch_align, depth_align;
+	u64 base_align;
+	struct array_mode_checker array_check;
 
 	/* on legacy kernel we don't perform advanced check */
 	if (p->rdev == NULL)
 		return 0;
 
+	/* convert to bytes */
+	base_offset <<= 8;
+	mip_offset <<= 8;
+
 	word0 = radeon_get_ib_value(p, idx + 0);
 	if (tiling_flags & RADEON_TILING_MACRO)
 		word0 |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1);
@@ -1128,46 +1210,38 @@ static inline int r600_check_texture_resource(struct radeon_cs_parser *p,  u32 i
 		return -EINVAL;
 	}
 
-	pitch = G_038000_PITCH(word0) + 1;
-	switch (G_038000_TILE_MODE(word0)) {
-	case V_038000_ARRAY_LINEAR_GENERAL:
-		pitch_align = 1;
-		/* XXX check height align */
-		break;
-	case V_038000_ARRAY_LINEAR_ALIGNED:
-		pitch_align = max((u32)64, (u32)(track->group_size / bpe)) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
-				 __func__, __LINE__, pitch);
-			return -EINVAL;
-		}
-		/* XXX check height align */
-		break;
-	case V_038000_ARRAY_1D_TILED_THIN1:
-		pitch_align = max((u32)8, (u32)(track->group_size / (8 * bpe))) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
-				 __func__, __LINE__, pitch);
-			return -EINVAL;
-		}
-		/* XXX check height align */
-		break;
-	case V_038000_ARRAY_2D_TILED_THIN1:
-		pitch_align = max((u32)track->nbanks,
-				  (u32)(((track->group_size / 8) / bpe) * track->nbanks)) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
-				__func__, __LINE__, pitch);
-			return -EINVAL;
-		}
-		/* XXX check height align */
-		break;
-	default:
-		dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__,
-			 G_038000_TILE_MODE(word0), word0);
+	/* pitch in texels */
+	pitch = (G_038000_PITCH(word0) + 1) * 8;
+	array_check.array_mode = G_038000_TILE_MODE(word0);
+	array_check.group_size = track->group_size;
+	array_check.nbanks = track->nbanks;
+	array_check.npipes = track->npipes;
+	array_check.nsamples = 1;
+	array_check.bpe = bpe;
+	if (r600_get_array_mode_alignment(&array_check,
+					  &pitch_align, &height_align, &depth_align, &base_align)) {
+		dev_warn(p->dev, "%s:%d tex array mode (%d) invalid\n",
+			 __func__, __LINE__, G_038000_TILE_MODE(word0));
+		return -EINVAL;
+	}
+
+	/* XXX check height as well... */
+
+	if (!IS_ALIGNED(pitch, pitch_align)) {
+		dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
+			 __func__, __LINE__, pitch);
+		return -EINVAL;
+	}
+	if (!IS_ALIGNED(base_offset, base_align)) {
+		dev_warn(p->dev, "%s:%d tex base offset (0x%llx) invalid\n",
+			 __func__, __LINE__, base_offset);
+		return -EINVAL;
+	}
+	if (!IS_ALIGNED(mip_offset, base_align)) {
+		dev_warn(p->dev, "%s:%d tex mip offset (0x%llx) invalid\n",
+			 __func__, __LINE__, mip_offset);
 		return -EINVAL;
 	}
-	/* XXX check offset align */
 
 	word0 = radeon_get_ib_value(p, idx + 4);
 	word1 = radeon_get_ib_value(p, idx + 5);
@@ -1402,7 +1476,10 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 				mip_offset = (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
 				mipmap = reloc->robj;
 				r = r600_check_texture_resource(p,  idx+(i*7)+1,
-								texture, mipmap, reloc->lobj.tiling_flags);
+								texture, mipmap,
+								base_offset + radeon_get_ib_value(p, idx+1+(i*7)+2),
+								mip_offset + radeon_get_ib_value(p, idx+1+(i*7)+3),
+								reloc->lobj.tiling_flags);
 				if (r)
 					return r;
 				ib[idx+1+(i*7)+2] += base_offset;
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index 966a793e225b..bff4dc4f410f 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -51,6 +51,12 @@
 #define PTE_READABLE				(1 << 5)
 #define PTE_WRITEABLE				(1 << 6)
 
+/* tiling bits */
+#define     ARRAY_LINEAR_GENERAL              0x00000000
+#define     ARRAY_LINEAR_ALIGNED              0x00000001
+#define     ARRAY_1D_TILED_THIN1              0x00000002
+#define     ARRAY_2D_TILED_THIN1              0x00000004
+
 /* Registers */
 #define	ARB_POP						0x2418
 #define 	ENABLE_TC128					(1 << 30)

From 21e2eae4daaecf2f2a391e4f4b596c800f198edf Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segoon@openwall.com>
Date: Sun, 14 Nov 2010 23:08:27 +0300
Subject: [PATCH 0734/1066] drm: radeon: fix error value sign

enable_vblank implementations should use negative result to indicate error.
radeon_enable_vblank() returns EINVAL in this case.  Change this to -EINVAL.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_irq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c
index 2f349a300195..465746bd51b7 100644
--- a/drivers/gpu/drm/radeon/radeon_irq.c
+++ b/drivers/gpu/drm/radeon/radeon_irq.c
@@ -76,7 +76,7 @@ int radeon_enable_vblank(struct drm_device *dev, int crtc)
 		default:
 			DRM_ERROR("tried to enable vblank on non-existent crtc %d\n",
 				  crtc);
-			return EINVAL;
+			return -EINVAL;
 		}
 	} else {
 		switch (crtc) {
@@ -89,7 +89,7 @@ int radeon_enable_vblank(struct drm_device *dev, int crtc)
 		default:
 			DRM_ERROR("tried to enable vblank on non-existent crtc %d\n",
 				  crtc);
-			return EINVAL;
+			return -EINVAL;
 		}
 	}
 

From d33ef52d9db8a36900dd53f2e32db9a521ace259 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Tue, 16 Nov 2010 16:53:14 -0500
Subject: [PATCH 0735/1066] drm/radeon/kms: fix typo in r600 cs checker

Looks like a typo in:
drm/radeon/r600: fix tiling issues in CS checker.
(f30df2fad0c901e74ac9a52a488a54c69a373a41)

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/r600_cs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 0f90fc3482ce..9bebac1ec006 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -315,7 +315,7 @@ static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
 		if (array_mode == V_0280A0_ARRAY_LINEAR_GENERAL) {
 			/* the initial DDX does bad things with the CB size occasionally */
 			/* it rounds up height too far for slice tile max but the BO is smaller */
-			tmp = (height - 7) * 8 * bpe;
+			tmp = (height - 7) * pitch * bpe;
 			if ((tmp + track->cb_color_bo_offset[i]) > radeon_bo_size(track->cb_color_bo[i])) {
 				dev_warn(p->dev, "%s offset[%d] %d %d %lu too big\n", __func__, i, track->cb_color_bo_offset[i], tmp, radeon_bo_size(track->cb_color_bo[i]));
 				return -EINVAL;

From ba251bde9ab8bdce8fbd3f60dbb71b36cc4c9adf Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Tue, 16 Nov 2010 12:09:39 -0500
Subject: [PATCH 0736/1066] drm/radeon/kms: turn the backlight off explicitly
 for dpms

Seems some newer systems require this explicitly.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_encoders.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index f678257c42e6..d55cb58283a9 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -1086,6 +1086,8 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
 				if (ASIC_IS_DCE4(rdev))
 					atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_ON);
 			}
+			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_LCD_BLON, 0, 0);
 			break;
 		case DRM_MODE_DPMS_STANDBY:
 		case DRM_MODE_DPMS_SUSPEND:
@@ -1095,20 +1097,31 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
 				if (ASIC_IS_DCE4(rdev))
 					atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF);
 			}
+			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_LCD_BLOFF, 0, 0);
 			break;
 		}
 	} else {
 		switch (mode) {
 		case DRM_MODE_DPMS_ON:
 			args.ucAction = ATOM_ENABLE;
+			atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+				args.ucAction = ATOM_LCD_BLON;
+				atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+			}
 			break;
 		case DRM_MODE_DPMS_STANDBY:
 		case DRM_MODE_DPMS_SUSPEND:
 		case DRM_MODE_DPMS_OFF:
 			args.ucAction = ATOM_DISABLE;
+			atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+				args.ucAction = ATOM_LCD_BLOFF;
+				atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+			}
 			break;
 		}
-		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 	}
 	radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
 

From c7a71fc761551dc8be8543f14a90d08cda4e77f9 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Wed, 17 Nov 2010 02:49:40 -0500
Subject: [PATCH 0737/1066] drm/radeon/kms/atom: set sane defaults in
 atombios_get_encoder_mode()

If there was no connector mapped to the encoder, atombios_get_encoder_mode()
returned 0 which is the id for DP.  Return something sane instead based on
the encoder id.  This avoids hitting the DP paths on non-DP encoders.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_encoders.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index d55cb58283a9..c6981dfd9156 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -595,6 +595,7 @@ atombios_digital_setup(struct drm_encoder *encoder, int action)
 int
 atombios_get_encoder_mode(struct drm_encoder *encoder)
 {
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	struct drm_device *dev = encoder->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct drm_connector *connector;
@@ -602,9 +603,20 @@ atombios_get_encoder_mode(struct drm_encoder *encoder)
 	struct radeon_connector_atom_dig *dig_connector;
 
 	connector = radeon_get_connector_for_encoder(encoder);
-	if (!connector)
-		return 0;
-
+	if (!connector) {
+		switch (radeon_encoder->encoder_id) {
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+			return ATOM_ENCODER_MODE_DVI;
+		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+		default:
+			return ATOM_ENCODER_MODE_CRT;
+		}
+	}
 	radeon_connector = to_radeon_connector(connector);
 
 	switch (connector->connector_type) {

From 8b834852d705af75ba942b040ca28533329ff13c Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Wed, 17 Nov 2010 02:54:42 -0500
Subject: [PATCH 0738/1066] drm/radeon/kms: properly power up/down the eDP
 panel as needed (v4)

The eDP panel must be powered up for aux transactions, so power it
up for detect and mode probe functions, otherwise power it up or
down based on dpms.

v2:
- only mess with eDP panel on DCE4+
- only mess with eDP panel on eDP connectors, not all DP connectors
v3:
- be extra careful to only mess with eDP panels on eDP connectors
v4:
- avoid possible null derefernce if a connector has not been
assigned to the encoder

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_connectors.c | 18 ++++++++
 drivers/gpu/drm/radeon/radeon_encoders.c   | 50 ++++++++++++++++++++++
 drivers/gpu/drm/radeon/radeon_mode.h       |  2 +
 3 files changed, 70 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index fe6c74780f18..3bef9f6d66fd 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -1008,9 +1008,21 @@ static void radeon_dp_connector_destroy(struct drm_connector *connector)
 static int radeon_dp_get_modes(struct drm_connector *connector)
 {
 	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	struct radeon_connector_atom_dig *radeon_dig_connector = radeon_connector->con_priv;
 	int ret;
 
+	if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+		if (!radeon_dig_connector->edp_on)
+			atombios_set_edp_panel_power(connector,
+						     ATOM_TRANSMITTER_ACTION_POWER_ON);
+	}
 	ret = radeon_ddc_get_modes(radeon_connector);
+	if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+		if (!radeon_dig_connector->edp_on)
+			atombios_set_edp_panel_power(connector,
+						     ATOM_TRANSMITTER_ACTION_POWER_OFF);
+	}
+
 	return ret;
 }
 
@@ -1029,8 +1041,14 @@ radeon_dp_detect(struct drm_connector *connector, bool force)
 	if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
 		/* eDP is always DP */
 		radeon_dig_connector->dp_sink_type = CONNECTOR_OBJECT_ID_DISPLAYPORT;
+		if (!radeon_dig_connector->edp_on)
+			atombios_set_edp_panel_power(connector,
+						     ATOM_TRANSMITTER_ACTION_POWER_ON);
 		if (radeon_dp_getdpcd(radeon_connector))
 			ret = connector_status_connected;
+		if (!radeon_dig_connector->edp_on)
+			atombios_set_edp_panel_power(connector,
+						     ATOM_TRANSMITTER_ACTION_POWER_OFF);
 	} else {
 		radeon_dig_connector->dp_sink_type = radeon_dp_getsinktype(radeon_connector);
 		if (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) {
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index c6981dfd9156..63f4964e8d2d 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -990,6 +990,36 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 }
 
+void
+atombios_set_edp_panel_power(struct drm_connector *connector, int action)
+{
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	struct drm_device *dev = radeon_connector->base.dev;
+	struct radeon_device *rdev = dev->dev_private;
+	union dig_transmitter_control args;
+	int index = GetIndexIntoMasterTable(COMMAND, UNIPHYTransmitterControl);
+	uint8_t frev, crev;
+
+	if (connector->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return;
+
+	if (!ASIC_IS_DCE4(rdev))
+		return;
+
+	if ((action != ATOM_TRANSMITTER_ACTION_POWER_ON) ||
+	    (action != ATOM_TRANSMITTER_ACTION_POWER_OFF))
+		return;
+
+	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+		return;
+
+	memset(&args, 0, sizeof(args));
+
+	args.v1.ucAction = action;
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
 static void
 atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
 {
@@ -1094,6 +1124,15 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
 			if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
 				struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
 
+				if (connector &&
+				    (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
+					struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+					struct radeon_connector_atom_dig *radeon_dig_connector =
+						radeon_connector->con_priv;
+					atombios_set_edp_panel_power(connector,
+								     ATOM_TRANSMITTER_ACTION_POWER_ON);
+					radeon_dig_connector->edp_on = true;
+				}
 				dp_link_train(encoder, connector);
 				if (ASIC_IS_DCE4(rdev))
 					atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_ON);
@@ -1106,8 +1145,19 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
 		case DRM_MODE_DPMS_OFF:
 			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0);
 			if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
+				struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+
 				if (ASIC_IS_DCE4(rdev))
 					atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF);
+				if (connector &&
+				    (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
+					struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+					struct radeon_connector_atom_dig *radeon_dig_connector =
+						radeon_connector->con_priv;
+					atombios_set_edp_panel_power(connector,
+								     ATOM_TRANSMITTER_ACTION_POWER_OFF);
+					radeon_dig_connector->edp_on = false;
+				}
 			}
 			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
 				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_LCD_BLOFF, 0, 0);
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 680f57644e86..ef588835201f 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -385,6 +385,7 @@ struct radeon_connector_atom_dig {
 	u8 dp_sink_type;
 	int dp_clock;
 	int dp_lane_count;
+	bool edp_on;
 };
 
 struct radeon_gpio_rec {
@@ -526,6 +527,7 @@ struct drm_encoder *radeon_encoder_legacy_tmds_ext_add(struct drm_device *dev, i
 extern void atombios_external_tmds_setup(struct drm_encoder *encoder, int action);
 extern void atombios_digital_setup(struct drm_encoder *encoder, int action);
 extern int atombios_get_encoder_mode(struct drm_encoder *encoder);
+extern void atombios_set_edp_panel_power(struct drm_connector *connector, int action);
 extern void radeon_encoder_set_active_device(struct drm_encoder *encoder);
 
 extern void radeon_crtc_load_lut(struct drm_crtc *crtc);

From 99999aaa091bdb3e16b5eed22f3a9a567f84f0fe Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Tue, 16 Nov 2010 12:09:41 -0500
Subject: [PATCH 0739/1066] drm/radeon/kms/atom: cleanup and unify DVO handling

Handle all the various asic family specific things for DVO.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon.h               |  4 +
 drivers/gpu/drm/radeon/radeon_encoders.c      | 88 ++++++++++---------
 .../gpu/drm/radeon/radeon_legacy_encoders.c   |  2 +-
 drivers/gpu/drm/radeon/radeon_mode.h          |  2 +-
 4 files changed, 51 insertions(+), 45 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 73f600d39ad4..3a7095743d44 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -1262,6 +1262,10 @@ void r100_pll_errata_after_index(struct radeon_device *rdev);
 		(rdev->family == CHIP_RS400) ||			\
 		(rdev->family == CHIP_RS480))
 #define ASIC_IS_AVIVO(rdev) ((rdev->family >= CHIP_RS600))
+#define ASIC_IS_DCE2(rdev) ((rdev->family == CHIP_RS600)  ||	\
+			    (rdev->family == CHIP_RS690)  ||	\
+			    (rdev->family == CHIP_RS740)  ||	\
+			    (rdev->family >= CHIP_R600))
 #define ASIC_IS_DCE3(rdev) ((rdev->family >= CHIP_RV620))
 #define ASIC_IS_DCE32(rdev) ((rdev->family >= CHIP_RV730))
 #define ASIC_IS_DCE4(rdev) ((rdev->family >= CHIP_CEDAR))
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 63f4964e8d2d..07df990a897b 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -176,6 +176,7 @@ static inline bool radeon_encoder_is_digital(struct drm_encoder *encoder)
 		return false;
 	}
 }
+
 void
 radeon_link_encoder_connector(struct drm_device *dev)
 {
@@ -426,52 +427,49 @@ atombios_tv_setup(struct drm_encoder *encoder, int action)
 
 }
 
+union dvo_encoder_control {
+	ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION ext_tmds;
+	DVO_ENCODER_CONTROL_PS_ALLOCATION dvo;
+	DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 dvo_v3;
+};
+
 void
-atombios_external_tmds_setup(struct drm_encoder *encoder, int action)
+atombios_dvo_setup(struct drm_encoder *encoder, int action)
 {
 	struct drm_device *dev = encoder->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION args;
-	int index = 0;
+	union dvo_encoder_control args;
+	int index = GetIndexIntoMasterTable(COMMAND, DVOEncoderControl);
 
 	memset(&args, 0, sizeof(args));
 
-	index = GetIndexIntoMasterTable(COMMAND, DVOEncoderControl);
+	if (ASIC_IS_DCE3(rdev)) {
+		/* DCE3+ */
+		args.dvo_v3.ucAction = action;
+		args.dvo_v3.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+		args.dvo_v3.ucDVOConfig = 0; /* XXX */
+	} else if (ASIC_IS_DCE2(rdev)) {
+		/* DCE2 (pre-DCE3 R6xx, RS600/690/740 */
+		args.dvo.sDVOEncoder.ucAction = action;
+		args.dvo.sDVOEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+		/* DFP1, CRT1, TV1 depending on the type of port */
+		args.dvo.sDVOEncoder.ucDeviceType = ATOM_DEVICE_DFP1_INDEX;
 
-	args.sXTmdsEncoder.ucEnable = action;
+		if (radeon_encoder->pixel_clock > 165000)
+			args.dvo.sDVOEncoder.usDevAttr.sDigAttrib.ucAttribute |= PANEL_ENCODER_MISC_DUAL;
+	} else {
+		/* R4xx, R5xx */
+		args.ext_tmds.sXTmdsEncoder.ucEnable = action;
 
-	if (radeon_encoder->pixel_clock > 165000)
-		args.sXTmdsEncoder.ucMisc = PANEL_ENCODER_MISC_DUAL;
+		if (radeon_encoder->pixel_clock > 165000)
+			args.ext_tmds.sXTmdsEncoder.ucMisc |= PANEL_ENCODER_MISC_DUAL;
 
-	/*if (pScrn->rgbBits == 8)*/
-	args.sXTmdsEncoder.ucMisc |= (1 << 1);
+		/*if (pScrn->rgbBits == 8)*/
+		args.ext_tmds.sXTmdsEncoder.ucMisc |= ATOM_PANEL_MISC_888RGB;
+	}
 
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-}
-
-static void
-atombios_ddia_setup(struct drm_encoder *encoder, int action)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	DVO_ENCODER_CONTROL_PS_ALLOCATION args;
-	int index = 0;
-
-	memset(&args, 0, sizeof(args));
-
-	index = GetIndexIntoMasterTable(COMMAND, DVOEncoderControl);
-
-	args.sDVOEncoder.ucAction = action;
-	args.sDVOEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
-
-	if (radeon_encoder->pixel_clock > 165000)
-		args.sDVOEncoder.usDevAttr.sDigAttrib.ucAttribute = PANEL_ENCODER_MISC_DUAL;
-
-	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
 }
 
 union lvds_encoder_control {
@@ -532,14 +530,14 @@ atombios_digital_setup(struct drm_encoder *encoder, int action)
 				if (dig->lcd_misc & ATOM_PANEL_MISC_DUAL)
 					args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL;
 				if (dig->lcd_misc & ATOM_PANEL_MISC_888RGB)
-					args.v1.ucMisc |= (1 << 1);
+					args.v1.ucMisc |= ATOM_PANEL_MISC_888RGB;
 			} else {
 				if (dig->linkb)
 					args.v1.ucMisc |= PANEL_ENCODER_MISC_TMDS_LINKB;
 				if (radeon_encoder->pixel_clock > 165000)
 					args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL;
 				/*if (pScrn->rgbBits == 8) */
-				args.v1.ucMisc |= (1 << 1);
+				args.v1.ucMisc |= ATOM_PANEL_MISC_888RGB;
 			}
 			break;
 		case 2:
@@ -846,6 +844,9 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t
 	memset(&args, 0, sizeof(args));
 
 	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+		index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
+		break;
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
@@ -1085,9 +1086,14 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
 		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
 	case ENCODER_OBJECT_ID_INTERNAL_DDI:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
 		index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
 		break;
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+		if (ASIC_IS_DCE3(rdev))
+			is_dig = true;
+		else
+			index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
+		break;
 	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
 		index = GetIndexIntoMasterTable(COMMAND, LCD1OutputControl);
 		break;
@@ -1317,7 +1323,7 @@ atombios_set_encoder_crtc_source(struct drm_encoder *encoder)
 		break;
 	default:
 		DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
-		break;
+		return;
 	}
 
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
@@ -1475,11 +1481,9 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
 		}
 		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DDI:
-		atombios_ddia_setup(encoder, ATOM_ENABLE);
-		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
 	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
-		atombios_external_tmds_setup(encoder, ATOM_ENABLE);
+		atombios_dvo_setup(encoder, ATOM_ENABLE);
 		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
 	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
@@ -1670,11 +1674,9 @@ static void radeon_atom_encoder_disable(struct drm_encoder *encoder)
 		}
 		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DDI:
-		atombios_ddia_setup(encoder, ATOM_DISABLE);
-		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
 	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
-		atombios_external_tmds_setup(encoder, ATOM_DISABLE);
+		atombios_dvo_setup(encoder, ATOM_DISABLE);
 		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
 	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index 0b8397000f4c..59f834ba283d 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -670,7 +670,7 @@ static void radeon_legacy_tmds_ext_mode_set(struct drm_encoder *encoder,
 
 	if (rdev->is_atom_bios) {
 		radeon_encoder->pixel_clock = adjusted_mode->clock;
-		atombios_external_tmds_setup(encoder, ATOM_ENABLE);
+		atombios_dvo_setup(encoder, ATOM_ENABLE);
 		fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
 	} else {
 		fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index ef588835201f..663bc51cf99e 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -524,7 +524,7 @@ struct drm_encoder *radeon_encoder_legacy_primary_dac_add(struct drm_device *dev
 struct drm_encoder *radeon_encoder_legacy_tv_dac_add(struct drm_device *dev, int bios_index, int with_tv);
 struct drm_encoder *radeon_encoder_legacy_tmds_int_add(struct drm_device *dev, int bios_index);
 struct drm_encoder *radeon_encoder_legacy_tmds_ext_add(struct drm_device *dev, int bios_index);
-extern void atombios_external_tmds_setup(struct drm_encoder *encoder, int action);
+extern void atombios_dvo_setup(struct drm_encoder *encoder, int action);
 extern void atombios_digital_setup(struct drm_encoder *encoder, int action);
 extern int atombios_get_encoder_mode(struct drm_encoder *encoder);
 extern void atombios_set_edp_panel_power(struct drm_connector *connector, int action);

From 3e4b99828d1c8abefefd37474503605c811c1b51 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Tue, 16 Nov 2010 12:09:42 -0500
Subject: [PATCH 0740/1066] drm/radeon/kms/atom: add proper external encoders
 support

These are external encoder chips connected via DVO or DP.
The actual external encoder programming is handled by the
kms encoder functions for primary encoder.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_encoders.c | 183 +++++++++++++++++++++++
 drivers/gpu/drm/radeon/radeon_mode.h     |   1 +
 2 files changed, 184 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 07df990a897b..041943df966b 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -229,6 +229,27 @@ radeon_get_connector_for_encoder(struct drm_encoder *encoder)
 	return NULL;
 }
 
+struct drm_encoder *radeon_atom_get_external_encoder(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_encoder *other_encoder;
+	struct radeon_encoder *other_radeon_encoder;
+
+	if (radeon_encoder->is_ext_encoder)
+		return NULL;
+
+	list_for_each_entry(other_encoder, &dev->mode_config.encoder_list, head) {
+		if (other_encoder == encoder)
+			continue;
+		other_radeon_encoder = to_radeon_encoder(other_encoder);
+		if (other_radeon_encoder->is_ext_encoder &&
+		    (radeon_encoder->devices & other_radeon_encoder->devices))
+			return other_encoder;
+	}
+	return NULL;
+}
+
 void radeon_panel_mode_fixup(struct drm_encoder *encoder,
 			     struct drm_display_mode *adjusted_mode)
 {
@@ -1021,6 +1042,75 @@ atombios_set_edp_panel_power(struct drm_connector *connector, int action)
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 }
 
+union external_encoder_control {
+	EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION v1;
+};
+
+static void
+atombios_external_encoder_setup(struct drm_encoder *encoder,
+				struct drm_encoder *ext_encoder,
+				int action)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	union external_encoder_control args;
+	struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+	int index = GetIndexIntoMasterTable(COMMAND, ExternalEncoderControl);
+	u8 frev, crev;
+	int dp_clock = 0;
+	int dp_lane_count = 0;
+	int connector_object_id = 0;
+
+	if (connector) {
+		struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+		struct radeon_connector_atom_dig *dig_connector =
+			radeon_connector->con_priv;
+
+		dp_clock = dig_connector->dp_clock;
+		dp_lane_count = dig_connector->dp_lane_count;
+		connector_object_id =
+			(radeon_connector->connector_object_id & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
+	}
+
+	memset(&args, 0, sizeof(args));
+
+	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+		return;
+
+	switch (frev) {
+	case 1:
+		/* no params on frev 1 */
+		break;
+	case 2:
+		switch (crev) {
+		case 1:
+		case 2:
+			args.v1.sDigEncoder.ucAction = action;
+			args.v1.sDigEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			args.v1.sDigEncoder.ucEncoderMode = atombios_get_encoder_mode(encoder);
+
+			if (args.v1.sDigEncoder.ucEncoderMode == ATOM_ENCODER_MODE_DP) {
+				if (dp_clock == 270000)
+					args.v1.sDigEncoder.ucConfig |= ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ;
+				args.v1.sDigEncoder.ucLaneNum = dp_lane_count;
+			} else if (radeon_encoder->pixel_clock > 165000)
+				args.v1.sDigEncoder.ucLaneNum = 8;
+			else
+				args.v1.sDigEncoder.ucLaneNum = 4;
+			break;
+		default:
+			DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
+			return;
+		}
+		break;
+	default:
+		DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
+		return;
+	}
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
 static void
 atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
 {
@@ -1064,6 +1154,7 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
 	struct drm_device *dev = encoder->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
 	DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION args;
 	int index = 0;
 	bool is_dig = false;
@@ -1191,6 +1282,24 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
 			break;
 		}
 	}
+
+	if (ext_encoder) {
+		int action;
+
+		switch (mode) {
+		case DRM_MODE_DPMS_ON:
+		default:
+			action = ATOM_ENABLE;
+			break;
+		case DRM_MODE_DPMS_STANDBY:
+		case DRM_MODE_DPMS_SUSPEND:
+		case DRM_MODE_DPMS_OFF:
+			action = ATOM_DISABLE;
+			break;
+		}
+		atombios_external_encoder_setup(encoder, ext_encoder, action);
+	}
+
 	radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
 
 }
@@ -1438,6 +1547,7 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
 	struct drm_device *dev = encoder->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
 
 	radeon_encoder->pixel_clock = adjusted_mode->clock;
 
@@ -1498,6 +1608,11 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
 		}
 		break;
 	}
+
+	if (ext_encoder) {
+		atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE);
+	}
+
 	atombios_apply_encoder_quirks(encoder, adjusted_mode);
 
 	if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) {
@@ -1698,6 +1813,53 @@ disable_done:
 	radeon_encoder->active_device = 0;
 }
 
+/* these are handled by the primary encoders */
+static void radeon_atom_ext_prepare(struct drm_encoder *encoder)
+{
+
+}
+
+static void radeon_atom_ext_commit(struct drm_encoder *encoder)
+{
+
+}
+
+static void
+radeon_atom_ext_mode_set(struct drm_encoder *encoder,
+			 struct drm_display_mode *mode,
+			 struct drm_display_mode *adjusted_mode)
+{
+
+}
+
+static void radeon_atom_ext_disable(struct drm_encoder *encoder)
+{
+
+}
+
+static void
+radeon_atom_ext_dpms(struct drm_encoder *encoder, int mode)
+{
+
+}
+
+static bool radeon_atom_ext_mode_fixup(struct drm_encoder *encoder,
+				       struct drm_display_mode *mode,
+				       struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static const struct drm_encoder_helper_funcs radeon_atom_ext_helper_funcs = {
+	.dpms = radeon_atom_ext_dpms,
+	.mode_fixup = radeon_atom_ext_mode_fixup,
+	.prepare = radeon_atom_ext_prepare,
+	.mode_set = radeon_atom_ext_mode_set,
+	.commit = radeon_atom_ext_commit,
+	.disable = radeon_atom_ext_disable,
+	/* no detect for TMDS/LVDS yet */
+};
+
 static const struct drm_encoder_helper_funcs radeon_atom_dig_helper_funcs = {
 	.dpms = radeon_atom_encoder_dpms,
 	.mode_fixup = radeon_atom_mode_fixup,
@@ -1807,6 +1969,7 @@ radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_enum, uint32_t
 	radeon_encoder->devices = supported_device;
 	radeon_encoder->rmx_type = RMX_OFF;
 	radeon_encoder->underscan_type = UNDERSCAN_OFF;
+	radeon_encoder->is_ext_encoder = false;
 
 	switch (radeon_encoder->encoder_id) {
 	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
@@ -1848,6 +2011,9 @@ radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_enum, uint32_t
 			radeon_encoder->rmx_type = RMX_FULL;
 			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
 			radeon_encoder->enc_priv = radeon_atombios_get_lvds_info(radeon_encoder);
+		} else if (radeon_encoder->devices & (ATOM_DEVICE_CRT_SUPPORT)) {
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
+			radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
 		} else {
 			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
 			radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
@@ -1856,5 +2022,22 @@ radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_enum, uint32_t
 		}
 		drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs);
 		break;
+	case ENCODER_OBJECT_ID_SI170B:
+	case ENCODER_OBJECT_ID_CH7303:
+	case ENCODER_OBJECT_ID_EXTERNAL_SDVOA:
+	case ENCODER_OBJECT_ID_EXTERNAL_SDVOB:
+	case ENCODER_OBJECT_ID_TITFP513:
+	case ENCODER_OBJECT_ID_VT1623:
+	case ENCODER_OBJECT_ID_HDMI_SI1930:
+		/* these are handled by the primary encoders */
+		radeon_encoder->is_ext_encoder = true;
+		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
+		else if (radeon_encoder->devices & (ATOM_DEVICE_CRT_SUPPORT))
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
+		else
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
+		drm_encoder_helper_add(encoder, &radeon_atom_ext_helper_funcs);
+		break;
 	}
 }
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 663bc51cf99e..e301c6f9e059 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -375,6 +375,7 @@ struct radeon_encoder {
 	int hdmi_config_offset;
 	int hdmi_audio_workaround;
 	int hdmi_buffer_status;
+	bool is_ext_encoder;
 };
 
 struct radeon_connector_atom_dig {

From a5193fe50e7f21c26d22c17c8196420fac1a3ca7 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Wed, 17 Nov 2010 17:56:49 -0500
Subject: [PATCH 0741/1066] drm/radeon/kms: register an i2c adapter name for
 the dp aux bus

This causes the connector to not be added since i2c init fails
for the adapter.  Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=31688

Noticed by Ari Savolainen.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: Ari Savolainen <ari.m.savolainen@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_i2c.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c
index 0cfbba02c4d0..d263bd1a0d80 100644
--- a/drivers/gpu/drm/radeon/radeon_i2c.c
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -946,6 +946,7 @@ struct radeon_i2c_chan *radeon_i2c_create_dp(struct drm_device *dev,
 	i2c->rec = *rec;
 	i2c->adapter.owner = THIS_MODULE;
 	i2c->dev = dev;
+	sprintf(i2c->adapter.name, "Radeon aux bus %s", name);
 	i2c_set_adapdata(&i2c->adapter, i2c);
 	i2c->adapter.algo_data = &i2c->algo.dp;
 	i2c->algo.dp.aux_ch = radeon_dp_i2c_aux_ch;

From 2f5993cca67f9c80dcd390feef13695ca072b8a5 Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Wed, 17 Nov 2010 13:24:48 +0100
Subject: [PATCH 0742/1066] drm/vmwgfx: Fix up an error path during bo creation

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_resource.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index 36e129f0023f..5408b1b7996f 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -862,7 +862,7 @@ int vmw_dmabuf_alloc_ioctl(struct drm_device *dev, void *data,
 			      &vmw_vram_sys_placement, true,
 			      &vmw_user_dmabuf_destroy);
 	if (unlikely(ret != 0))
-		return ret;
+		goto out_no_dmabuf;
 
 	tmp = ttm_bo_reference(&vmw_user_bo->dma.base);
 	ret = ttm_base_object_init(vmw_fpriv(file_priv)->tfile,
@@ -870,19 +870,21 @@ int vmw_dmabuf_alloc_ioctl(struct drm_device *dev, void *data,
 				   false,
 				   ttm_buffer_type,
 				   &vmw_user_dmabuf_release, NULL);
-	if (unlikely(ret != 0)) {
-		ttm_bo_unref(&tmp);
-	} else {
+	if (unlikely(ret != 0))
+		goto out_no_base_object;
+	else {
 		rep->handle = vmw_user_bo->base.hash.key;
 		rep->map_handle = vmw_user_bo->dma.base.addr_space_offset;
 		rep->cur_gmr_id = vmw_user_bo->base.hash.key;
 		rep->cur_gmr_offset = 0;
 	}
-	ttm_bo_unref(&tmp);
 
+out_no_base_object:
+	ttm_bo_unref(&tmp);
+out_no_dmabuf:
 	ttm_read_unlock(&vmaster->lock);
 
-	return 0;
+	return ret;
 }
 
 int vmw_dmabuf_unref_ioctl(struct drm_device *dev, void *data,

From 268b2510de14f62134d87ba9b4981816192db386 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Wed, 17 Nov 2010 19:00:26 -0500
Subject: [PATCH 0743/1066] drm/radeon/kms: fix alignment when allocating
 buffers

We were previously dropping alignment requests on the floor
when allocating buffers so we always ended up page aligned.
Certain tiling modes on 6xx+ require larger alignment which
wasn't happening before.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: Jerome Glisse <j.glisse@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/evergreen_blit_kms.c | 2 +-
 drivers/gpu/drm/radeon/r600.c               | 2 +-
 drivers/gpu/drm/radeon/r600_blit_kms.c      | 2 +-
 drivers/gpu/drm/radeon/radeon_benchmark.c   | 4 ++--
 drivers/gpu/drm/radeon/radeon_device.c      | 2 +-
 drivers/gpu/drm/radeon/radeon_gart.c        | 4 ++--
 drivers/gpu/drm/radeon/radeon_gem.c         | 2 +-
 drivers/gpu/drm/radeon/radeon_object.c      | 7 ++++---
 drivers/gpu/drm/radeon/radeon_object.h      | 7 ++++---
 drivers/gpu/drm/radeon/radeon_ring.c        | 6 +++---
 drivers/gpu/drm/radeon/radeon_test.c        | 4 ++--
 drivers/gpu/drm/radeon/radeon_ttm.c         | 2 +-
 drivers/gpu/drm/radeon/rv770.c              | 4 ++--
 13 files changed, 25 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/radeon/evergreen_blit_kms.c b/drivers/gpu/drm/radeon/evergreen_blit_kms.c
index ac3b6dde23db..e0e590110dd4 100644
--- a/drivers/gpu/drm/radeon/evergreen_blit_kms.c
+++ b/drivers/gpu/drm/radeon/evergreen_blit_kms.c
@@ -459,7 +459,7 @@ int evergreen_blit_init(struct radeon_device *rdev)
 	obj_size += evergreen_ps_size * 4;
 	obj_size = ALIGN(obj_size, 256);
 
-	r = radeon_bo_create(rdev, NULL, obj_size, true, RADEON_GEM_DOMAIN_VRAM,
+	r = radeon_bo_create(rdev, NULL, obj_size, PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
 				&rdev->r600_blit.shader_obj);
 	if (r) {
 		DRM_ERROR("evergreen failed to allocate shader\n");
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 0f806cc7dc75..a3552594ccc4 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2718,7 +2718,7 @@ static int r600_ih_ring_alloc(struct radeon_device *rdev)
 	/* Allocate ring buffer */
 	if (rdev->ih.ring_obj == NULL) {
 		r = radeon_bo_create(rdev, NULL, rdev->ih.ring_size,
-				     true,
+				     PAGE_SIZE, true,
 				     RADEON_GEM_DOMAIN_GTT,
 				     &rdev->ih.ring_obj);
 		if (r) {
diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c
index 8362974ef41a..86e5aa07f0db 100644
--- a/drivers/gpu/drm/radeon/r600_blit_kms.c
+++ b/drivers/gpu/drm/radeon/r600_blit_kms.c
@@ -501,7 +501,7 @@ int r600_blit_init(struct radeon_device *rdev)
 	obj_size += r6xx_ps_size * 4;
 	obj_size = ALIGN(obj_size, 256);
 
-	r = radeon_bo_create(rdev, NULL, obj_size, true, RADEON_GEM_DOMAIN_VRAM,
+	r = radeon_bo_create(rdev, NULL, obj_size, PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
 				&rdev->r600_blit.shader_obj);
 	if (r) {
 		DRM_ERROR("r600 failed to allocate shader\n");
diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c
index 7932dc4d6b90..c558685cc637 100644
--- a/drivers/gpu/drm/radeon/radeon_benchmark.c
+++ b/drivers/gpu/drm/radeon/radeon_benchmark.c
@@ -41,7 +41,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize,
 
 	size = bsize;
 	n = 1024;
-	r = radeon_bo_create(rdev, NULL, size, true, sdomain, &sobj);
+	r = radeon_bo_create(rdev, NULL, size, PAGE_SIZE, true, sdomain, &sobj);
 	if (r) {
 		goto out_cleanup;
 	}
@@ -53,7 +53,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize,
 	if (r) {
 		goto out_cleanup;
 	}
-	r = radeon_bo_create(rdev, NULL, size, true, ddomain, &dobj);
+	r = radeon_bo_create(rdev, NULL, size, PAGE_SIZE, true, ddomain, &dobj);
 	if (r) {
 		goto out_cleanup;
 	}
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 8adfedfe547f..d8ac1849180d 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -180,7 +180,7 @@ int radeon_wb_init(struct radeon_device *rdev)
 	int r;
 
 	if (rdev->wb.wb_obj == NULL) {
-		r = radeon_bo_create(rdev, NULL, RADEON_GPU_PAGE_SIZE, true,
+		r = radeon_bo_create(rdev, NULL, RADEON_GPU_PAGE_SIZE, PAGE_SIZE, true,
 				RADEON_GEM_DOMAIN_GTT, &rdev->wb.wb_obj);
 		if (r) {
 			dev_warn(rdev->dev, "(%d) create WB bo failed\n", r);
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index e65b90317fab..65016117d95f 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -79,8 +79,8 @@ int radeon_gart_table_vram_alloc(struct radeon_device *rdev)
 
 	if (rdev->gart.table.vram.robj == NULL) {
 		r = radeon_bo_create(rdev, NULL, rdev->gart.table_size,
-					true, RADEON_GEM_DOMAIN_VRAM,
-					&rdev->gart.table.vram.robj);
+				     PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
+				     &rdev->gart.table.vram.robj);
 		if (r) {
 			return r;
 		}
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index d1e595d91723..df95eb83dac6 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -67,7 +67,7 @@ int radeon_gem_object_create(struct radeon_device *rdev, int size,
 	if (alignment < PAGE_SIZE) {
 		alignment = PAGE_SIZE;
 	}
-	r = radeon_bo_create(rdev, gobj, size, kernel, initial_domain, &robj);
+	r = radeon_bo_create(rdev, gobj, size, alignment, kernel, initial_domain, &robj);
 	if (r) {
 		if (r != -ERESTARTSYS)
 			DRM_ERROR("Failed to allocate GEM object (%d, %d, %u, %d)\n",
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 8eb183466015..1d067743fee0 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -86,11 +86,12 @@ void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain)
 }
 
 int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj,
-			unsigned long size, bool kernel, u32 domain,
-			struct radeon_bo **bo_ptr)
+		     unsigned long size, int byte_align, bool kernel, u32 domain,
+		     struct radeon_bo **bo_ptr)
 {
 	struct radeon_bo *bo;
 	enum ttm_bo_type type;
+	int page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT;
 	int r;
 
 	if (unlikely(rdev->mman.bdev.dev_mapping == NULL)) {
@@ -115,7 +116,7 @@ retry:
 	/* Kernel allocation are uninterruptible */
 	mutex_lock(&rdev->vram_mutex);
 	r = ttm_bo_init(&rdev->mman.bdev, &bo->tbo, size, type,
-			&bo->placement, 0, 0, !kernel, NULL, size,
+			&bo->placement, page_align, 0, !kernel, NULL, size,
 			&radeon_ttm_bo_destroy);
 	mutex_unlock(&rdev->vram_mutex);
 	if (unlikely(r != 0)) {
diff --git a/drivers/gpu/drm/radeon/radeon_object.h b/drivers/gpu/drm/radeon/radeon_object.h
index 3481bc7f6f58..d143702b244a 100644
--- a/drivers/gpu/drm/radeon/radeon_object.h
+++ b/drivers/gpu/drm/radeon/radeon_object.h
@@ -137,9 +137,10 @@ static inline int radeon_bo_wait(struct radeon_bo *bo, u32 *mem_type,
 }
 
 extern int radeon_bo_create(struct radeon_device *rdev,
-				struct drm_gem_object *gobj, unsigned long size,
-				bool kernel, u32 domain,
-				struct radeon_bo **bo_ptr);
+			    struct drm_gem_object *gobj, unsigned long size,
+			    int byte_align,
+			    bool kernel, u32 domain,
+			    struct radeon_bo **bo_ptr);
 extern int radeon_bo_kmap(struct radeon_bo *bo, void **ptr);
 extern void radeon_bo_kunmap(struct radeon_bo *bo);
 extern void radeon_bo_unref(struct radeon_bo **bo);
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c
index 6ea798ce8218..06e79822a2bf 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -176,8 +176,8 @@ int radeon_ib_pool_init(struct radeon_device *rdev)
 	INIT_LIST_HEAD(&rdev->ib_pool.bogus_ib);
 	/* Allocate 1M object buffer */
 	r = radeon_bo_create(rdev, NULL,  RADEON_IB_POOL_SIZE*64*1024,
-				true, RADEON_GEM_DOMAIN_GTT,
-				&rdev->ib_pool.robj);
+			     PAGE_SIZE, true, RADEON_GEM_DOMAIN_GTT,
+			     &rdev->ib_pool.robj);
 	if (r) {
 		DRM_ERROR("radeon: failed to ib pool (%d).\n", r);
 		return r;
@@ -332,7 +332,7 @@ int radeon_ring_init(struct radeon_device *rdev, unsigned ring_size)
 	rdev->cp.ring_size = ring_size;
 	/* Allocate ring buffer */
 	if (rdev->cp.ring_obj == NULL) {
-		r = radeon_bo_create(rdev, NULL, rdev->cp.ring_size, true,
+		r = radeon_bo_create(rdev, NULL, rdev->cp.ring_size, PAGE_SIZE, true,
 					RADEON_GEM_DOMAIN_GTT,
 					&rdev->cp.ring_obj);
 		if (r) {
diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c
index 313c96bc09da..5b44f652145c 100644
--- a/drivers/gpu/drm/radeon/radeon_test.c
+++ b/drivers/gpu/drm/radeon/radeon_test.c
@@ -52,7 +52,7 @@ void radeon_test_moves(struct radeon_device *rdev)
 		goto out_cleanup;
 	}
 
-	r = radeon_bo_create(rdev, NULL, size, true, RADEON_GEM_DOMAIN_VRAM,
+	r = radeon_bo_create(rdev, NULL, size, PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
 				&vram_obj);
 	if (r) {
 		DRM_ERROR("Failed to create VRAM object\n");
@@ -71,7 +71,7 @@ void radeon_test_moves(struct radeon_device *rdev)
 		void **gtt_start, **gtt_end;
 		void **vram_start, **vram_end;
 
-		r = radeon_bo_create(rdev, NULL, size, true,
+		r = radeon_bo_create(rdev, NULL, size, PAGE_SIZE, true,
 					 RADEON_GEM_DOMAIN_GTT, gtt_obj + i);
 		if (r) {
 			DRM_ERROR("Failed to create GTT object %d\n", i);
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 01c2c736a1da..1272e4b6a1d4 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -529,7 +529,7 @@ int radeon_ttm_init(struct radeon_device *rdev)
 		DRM_ERROR("Failed initializing VRAM heap.\n");
 		return r;
 	}
-	r = radeon_bo_create(rdev, NULL, 256 * 1024, true,
+	r = radeon_bo_create(rdev, NULL, 256 * 1024, PAGE_SIZE, true,
 				RADEON_GEM_DOMAIN_VRAM,
 				&rdev->stollen_vga_memory);
 	if (r) {
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 245374e2b778..4dfead8cee33 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -915,8 +915,8 @@ static int rv770_vram_scratch_init(struct radeon_device *rdev)
 
 	if (rdev->vram_scratch.robj == NULL) {
 		r = radeon_bo_create(rdev, NULL, RADEON_GPU_PAGE_SIZE,
-					true, RADEON_GEM_DOMAIN_VRAM,
-					&rdev->vram_scratch.robj);
+				     PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
+				     &rdev->vram_scratch.robj);
 		if (r) {
 			return r;
 		}

From 1aa52bd3bc839064d5a3e4de406850f4a3aa5378 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Wed, 17 Nov 2010 12:11:03 -0500
Subject: [PATCH 0744/1066] drm/radeon/kms: fix tiling info on evergreen

We aren't currently using tiling in userspace on evergreen,
but the info we currently return for the tiling info query
(gb_addr_config) is no adequate for userspace tiling alignment
calculations.  It does not contain the bank info.  Create a custom
tiling info dword with all the necessary info (num channels,
num banks, group size, row size).

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/evergreen.c | 31 +++++++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 488c36c8f5e6..4dc5b4714c5a 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1650,7 +1650,36 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
 		}
 	}
 
-	rdev->config.evergreen.tile_config = gb_addr_config;
+	/* setup tiling info dword.  gb_addr_config is not adequate since it does
+	 * not have bank info, so create a custom tiling dword.
+	 * bits 3:0   num_pipes
+	 * bits 7:4   num_banks
+	 * bits 11:8  group_size
+	 * bits 15:12 row_size
+	 */
+	rdev->config.evergreen.tile_config = 0;
+	switch (rdev->config.evergreen.max_tile_pipes) {
+	case 1:
+	default:
+		rdev->config.evergreen.tile_config |= (0 << 0);
+		break;
+	case 2:
+		rdev->config.evergreen.tile_config |= (1 << 0);
+		break;
+	case 4:
+		rdev->config.evergreen.tile_config |= (2 << 0);
+		break;
+	case 8:
+		rdev->config.evergreen.tile_config |= (3 << 0);
+		break;
+	}
+	rdev->config.evergreen.tile_config |=
+		((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) << 4;
+	rdev->config.evergreen.tile_config |=
+		((mc_arb_ramcfg & BURSTLENGTH_MASK) >> BURSTLENGTH_SHIFT) << 8;
+	rdev->config.evergreen.tile_config |=
+		((gb_addr_config & 0x30000000) >> 28) << 12;
+
 	WREG32(GB_BACKEND_MAP, gb_backend_map);
 	WREG32(GB_ADDR_CONFIG, gb_addr_config);
 	WREG32(DMIF_ADDR_CONFIG, gb_addr_config);

From 95ccb0f3bdc4438bf470c25450e6a8a6090ca253 Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu, 11 Nov 2010 10:04:53 +0100
Subject: [PATCH 0745/1066] drm/ttm: Fix up a theoretical deadlock

A process suspended waiting for a higher sequence or no sequence to unreserve,
a bo may be beaten to the reservation by a process with a lower sequence.
In that case the first process should give up trying to reserve and
return -EAGAIN. In order for that to happen, we must wake waiting processes
when we change sequence, so that they have a chance to detect the new
sequence.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/ttm/ttm_bo.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 3ca77dc03915..148a322d8f5d 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -224,6 +224,9 @@ int ttm_bo_reserve_locked(struct ttm_buffer_object *bo,
 	int ret;
 
 	while (unlikely(atomic_cmpxchg(&bo->reserved, 0, 1) != 0)) {
+		/**
+		 * Deadlock avoidance for multi-bo reserving.
+		 */
 		if (use_sequence && bo->seq_valid &&
 			(sequence - bo->val_seq < (1 << 31))) {
 			return -EAGAIN;
@@ -241,6 +244,14 @@ int ttm_bo_reserve_locked(struct ttm_buffer_object *bo,
 	}
 
 	if (use_sequence) {
+		/**
+		 * Wake up waiters that may need to recheck for deadlock,
+		 * if we decreased the sequence number.
+		 */
+		if (unlikely((bo->val_seq - sequence < (1 << 31))
+			     || !bo->seq_valid))
+			wake_up_all(&bo->event_queue);
+
 		bo->val_seq = sequence;
 		bo->seq_valid = true;
 	} else {

From d53e4307c2f3856167407a1d9b8f8fa001286066 Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Wed, 17 Nov 2010 06:50:17 +0000
Subject: [PATCH 0746/1066] sh: Use GCC __builtin_prefetch() to implement
 prefetch().

GCC's __builtin_prefetch() was introduced a long time ago, all
supported GCC versions have it. So this patch is to use it for
implementing the prefetch on SH2A and SH4.

The current  prefetch implementation is almost equivalent with
__builtin_prefetch.
The third parameter in the __builtin_prefetch is the locality
that it's not supported on SH architectures.  It has been set
to three and it should be verified if it's suitable for SH2A
as well. I didn't test on this architecture.

The builtin usage should be more efficient that an __asm__
because less barriers, and because the compiler doesn't see the
inst as a "black box" allowing better code generation.

This has been already done on other architectures (see the commit:
0453fb3c528c5eb3483441a466b24a4cb409eec5).

Many thanks to Christian Bruel <christain.bruel@st.com> for his
support on evaluate the impact of the gcc built-in on SH4 arch.

No regressions found while testing with LMbench on STLinux targets.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/processor_32.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
index 46d5179c9f49..e3c73cdd8c90 100644
--- a/arch/sh/include/asm/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -199,10 +199,13 @@ extern unsigned long get_wchan(struct task_struct *p);
 #define ARCH_HAS_PREFETCHW
 static inline void prefetch(void *x)
 {
-	__asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory");
+	__builtin_prefetch(x, 0, 3);
 }
 
-#define prefetchw(x)	prefetch(x)
+static inline void prefetchw(void *x)
+{
+	__builtin_prefetch(x, 1, 3);
+}
 #endif
 
 #endif /* __KERNEL__ */

From 4d048435e9864998f6a6ad16422393d42322716d Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Wed, 17 Nov 2010 11:44:00 +0000
Subject: [PATCH 0747/1066] ARM: mach-shmobile: sh7372 USB0/IIC1 MSTP fix

Fix a MSTP assignment problem in the sh7372 clock
framework code. The USB drivers should attach to
MSTP322 not MSTP33 where IIC1 is located.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/clock-sh7372.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 7db31e6c6bf2..d3313a95dbfc 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -647,8 +647,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
 	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
-	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
-	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */
+	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
+	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */

From 89c8fb7a0156f19237880c4ea576eb5add8c0d60 Mon Sep 17 00:00:00 2001
From: Vicente Jimenez Aguilar <googuy@gmail.com>
Date: Thu, 18 Nov 2010 15:01:54 +0900
Subject: [PATCH 0748/1066] fbdev: Update documentation index file.

This is a simple update of the file Documentation/fb/00-INDEX based on
the directory content.

Signed-off-by: Vicente Jimenez Aguilar <googuy@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 Documentation/fb/00-INDEX | 32 +++++++++++++++++++++++++-------
 1 file changed, 25 insertions(+), 7 deletions(-)

diff --git a/Documentation/fb/00-INDEX b/Documentation/fb/00-INDEX
index a618fd99c9f0..30a70542e823 100644
--- a/Documentation/fb/00-INDEX
+++ b/Documentation/fb/00-INDEX
@@ -4,33 +4,41 @@ please mail me.
 				    Geert Uytterhoeven <geert@linux-m68k.org>
 
 00-INDEX
-	- this file
+	- this file.
 arkfb.txt
 	- info on the fbdev driver for ARK Logic chips.
 aty128fb.txt
 	- info on the ATI Rage128 frame buffer driver.
 cirrusfb.txt
 	- info on the driver for Cirrus Logic chipsets.
+cmap_xfbdev.txt
+	- an introduction to fbdev's cmap structures.
 deferred_io.txt
 	- an introduction to deferred IO.
+efifb.txt
+	- info on the EFI platform driver for Intel based Apple computers.
+ep93xx-fb.txt
+	- info on the driver for EP93xx LCD controller.
 fbcon.txt
 	- intro to and usage guide for the framebuffer console (fbcon).
 framebuffer.txt
 	- introduction to frame buffer devices.
-imacfb.txt
-	- info on the generic EFI platform driver for Intel based Macs.
+gxfb.txt
+	- info on the framebuffer driver for AMD Geode GX2 based processors.
 intel810.txt
 	- documentation for the Intel 810/815 framebuffer driver.
 intelfb.txt
 	- docs for Intel 830M/845G/852GM/855GM/865G/915G/945G fb driver.
 internals.txt
 	- quick overview of frame buffer device internals.
+lxfb.txt
+	- info on the framebuffer driver for AMD Geode LX based processors.
 matroxfb.txt
 	- info on the Matrox framebuffer driver for Alpha, Intel and PPC.
+metronomefb.txt
+	- info on the driver for the Metronome display controller.
 modedb.txt
 	- info on the video mode database.
-matroxfb.txt
-	- info on the Matrox frame buffer driver.
 pvr2fb.txt
 	- info on the PowerVR 2 frame buffer driver.
 pxafb.txt
@@ -39,13 +47,23 @@ s3fb.txt
 	- info on the fbdev driver for S3 Trio/Virge chips.
 sa1100fb.txt
 	- information about the driver for the SA-1100 LCD controller.
+sh7760fb.txt
+	- info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
 sisfb.txt
 	- info on the framebuffer device driver for various SiS chips.
 sstfb.txt
 	- info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
 tgafb.txt
-	- info on the TGA (DECChip 21030) frame buffer driver
+	- info on the TGA (DECChip 21030) frame buffer driver.
+tridentfb.txt
+	info on the framebuffer driver for some Trident chip based cards.
+uvesafb.txt
+	- info on the userspace VESA (VBE2+ compliant) frame buffer device.
 vesafb.txt
-	- info on the VESA frame buffer device
+	- info on the VESA frame buffer device.
+viafb.modes
+	- list of modes for VIA Integration Graphic Chip.
+viafb.txt
+	- info on the VIA Integration Graphic Chip console framebuffer driver.
 vt8623fb.txt
 	- info on the fb driver for the graphics core in VIA VT8623 chipsets.

From 0e2af2a9abf94b408ff70679b692a8644fed4aab Mon Sep 17 00:00:00 2001
From: Rakib Mullick <rakib.mullick@gmail.com>
Date: Fri, 12 Nov 2010 09:50:54 -0500
Subject: [PATCH 0749/1066] x86, hw_nmi: Move backtrace_mask declaration under
 ARCH_HAS_NMI_WATCHDOG
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

backtrace_mask has been used under the code context of
ARCH_HAS_NMI_WATCHDOG. So put it into that context.
We were warned by the following warning:

  arch/x86/kernel/apic/hw_nmi.c:21: warning: ‘backtrace_mask’ defined but not used

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
LKML-Reference: <1289573455-3410-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/hw_nmi.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c
index cefd6942f0e9..62f6e1e55b90 100644
--- a/arch/x86/kernel/apic/hw_nmi.c
+++ b/arch/x86/kernel/apic/hw_nmi.c
@@ -17,15 +17,16 @@
 #include <linux/nmi.h>
 #include <linux/module.h>
 
-/* For reliability, we're prepared to waste bits here. */
-static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
-
 u64 hw_nmi_get_sample_period(void)
 {
 	return (u64)(cpu_khz) * 1000 * 60;
 }
 
 #ifdef ARCH_HAS_NMI_WATCHDOG
+
+/* For reliability, we're prepared to waste bits here. */
+static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
+
 void arch_trigger_all_cpu_backtrace(void)
 {
 	int i;

From 96e612ffc301372d3a3b94e2cb5d1e0c1c207dd1 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Tue, 16 Nov 2010 13:45:16 +0900
Subject: [PATCH 0750/1066] x86, asm: Fix binutils 2.15 build failure

Add parentheses around one pushl_cfi argument.

Commit df5d1874 "x86: Use {push,pop}{l,q}_cfi in more places"
caused GNU assembler 2.15 (Debian Sarge) to fail. It is still
failing as of commit 07bd8516 "x86, asm: Restore parentheses
around one pushl_cfi argument". This patch solves build failure
with GNU assembler 2.15.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Jan Beulich <jbeulich@novell.com>
Cc: heukelum@fastmail.fm
Cc: hpa@linux.intel.com
LKML-Reference: <201011160445.oAG4jGif079860@www262.sakura.ne.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/entry_32.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 59e175e89599..591e60104278 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -395,7 +395,7 @@ sysenter_past_esp:
 	 * A tiny bit of offset fixup is necessary - 4*4 means the 4 words
 	 * pushed above; +8 corresponds to copy_thread's esp0 setting.
 	 */
-	pushl_cfi (TI_sysenter_return-THREAD_SIZE_asm+8+4*4)(%esp)
+	pushl_cfi ((TI_sysenter_return)-THREAD_SIZE_asm+8+4*4)(%esp)
 	CFI_REL_OFFSET eip, 0
 
 	pushl_cfi %eax

From 9223081f54e3dc5045fe41a475165d9003c9a779 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sat, 13 Nov 2010 10:52:09 -0800
Subject: [PATCH 0751/1066] x86: Use online node real index in
 calulate_tbl_offset()

Found a NUMA system that doesn't have RAM installed at the first
socket which hangs while executing init scripts.

bisected it to:

 | commit 932967202182743c01a2eee4bdfa2c42697bc586
 | Author: Shaohua Li <shaohua.li@intel.com>
 | Date:   Wed Oct 20 11:07:03 2010 +0800
 |
 |     x86: Spread tlb flush vector between nodes

It turns out when first socket is not online it could have cpus on
node1 tlb_offset set to bigger than NUM_INVALIDATE_TLB_VECTORS.

That could affect systems like 4 sockets, but socket 2 doesn't
have installed, sockets 3 will get too big tlb_offset.

Need to use real online node idx.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4CDEDE59.40603@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/tlb.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 12cdbb17ad18..6acc724d5d8f 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -223,7 +223,7 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
 
 static void __cpuinit calculate_tlb_offset(void)
 {
-	int cpu, node, nr_node_vecs;
+	int cpu, node, nr_node_vecs, idx = 0;
 	/*
 	 * we are changing tlb_vector_offset for each CPU in runtime, but this
 	 * will not cause inconsistency, as the write is atomic under X86. we
@@ -239,7 +239,7 @@ static void __cpuinit calculate_tlb_offset(void)
 		nr_node_vecs = NUM_INVALIDATE_TLB_VECTORS/nr_online_nodes;
 
 	for_each_online_node(node) {
-		int node_offset = (node % NUM_INVALIDATE_TLB_VECTORS) *
+		int node_offset = (idx % NUM_INVALIDATE_TLB_VECTORS) *
 			nr_node_vecs;
 		int cpu_offset = 0;
 		for_each_cpu(cpu, cpumask_of_node(node)) {
@@ -248,6 +248,7 @@ static void __cpuinit calculate_tlb_offset(void)
 			cpu_offset++;
 			cpu_offset = cpu_offset % nr_node_vecs;
 		}
+		idx++;
 	}
 }
 

From 8191c9f69202d4dbc66063cb92059b8a58640d34 Mon Sep 17 00:00:00 2001
From: Dimitri Sivanich <sivanich@sgi.com>
Date: Tue, 16 Nov 2010 16:23:52 -0600
Subject: [PATCH 0752/1066] x86: UV: Address interrupt/IO port operation
 conflict

This patch for SGI UV systems addresses a problem whereby
interrupt transactions being looped back from a local IOH,
through the hub to a local CPU can (erroneously) conflict with
IO port operations and other transactions.

To workaound this we set a high bit in the APIC IDs used for
interrupts. This bit appears to be ignored by the sockets, but
it avoids the conflict in the hub.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
LKML-Reference: <20101116222352.GA8155@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
___

 arch/x86/include/asm/uv/uv_hub.h   |    4 ++++
 arch/x86/include/asm/uv/uv_mmrs.h  |   19 ++++++++++++++++++-
 arch/x86/kernel/apic/x2apic_uv_x.c |   25 +++++++++++++++++++++++--
 arch/x86/platform/uv/tlb_uv.c      |    2 +-
 arch/x86/platform/uv/uv_time.c     |    4 +++-
 5 files changed, 49 insertions(+), 5 deletions(-)
---
 arch/x86/include/asm/uv/uv_hub.h   |  4 ++++
 arch/x86/include/asm/uv/uv_mmrs.h  | 19 ++++++++++++++++++-
 arch/x86/kernel/apic/x2apic_uv_x.c | 25 +++++++++++++++++++++++--
 arch/x86/platform/uv/tlb_uv.c      |  2 +-
 arch/x86/platform/uv/uv_time.c     |  4 +++-
 5 files changed, 49 insertions(+), 5 deletions(-)

diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index e969f691cbfd..a501741c2335 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -199,6 +199,8 @@ union uvh_apicid {
 #define UVH_APICID		0x002D0E00L
 #define UV_APIC_PNODE_SHIFT	6
 
+#define UV_APICID_HIBIT_MASK	0xffff0000
+
 /* Local Bus from cpu's perspective */
 #define LOCAL_BUS_BASE		0x1c00000
 #define LOCAL_BUS_SIZE		(4 * 1024 * 1024)
@@ -491,8 +493,10 @@ static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value)
 	}
 }
 
+extern unsigned int uv_apicid_hibits;
 static unsigned long uv_hub_ipi_value(int apicid, int vector, int mode)
 {
+	apicid |= uv_apicid_hibits;
 	return (1UL << UVH_IPI_INT_SEND_SHFT) |
 			((apicid) << UVH_IPI_INT_APIC_ID_SHFT) |
 			(mode << UVH_IPI_INT_DELIVERY_MODE_SHFT) |
diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
index 6d90adf4428a..20cafeac7455 100644
--- a/arch/x86/include/asm/uv/uv_mmrs.h
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -5,7 +5,7 @@
  *
  * SGI UV MMR definitions
  *
- * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2007-2010 Silicon Graphics, Inc. All rights reserved.
  */
 
 #ifndef _ASM_X86_UV_UV_MMRS_H
@@ -753,6 +753,23 @@ union uvh_lb_bau_sb_descriptor_base_u {
     } s;
 };
 
+/* ========================================================================= */
+/*                   UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK                     */
+/* ========================================================================= */
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK 0x320130UL
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_32 0x009f0
+
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_SHFT 0
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_MASK 0x00000000ffffffffUL
+
+union uvh_lb_target_physical_apic_id_mask_u {
+	unsigned long v;
+	struct uvh_lb_target_physical_apic_id_mask_s {
+		unsigned long bit_enables : 32;  /* RW */
+		unsigned long rsvd_32_63  : 32;  /*    */
+	} s;
+};
+
 /* ========================================================================= */
 /*                               UVH_NODE_ID                                 */
 /* ========================================================================= */
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 194539aea175..c1c52c341f40 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -44,6 +44,8 @@ static u64 gru_start_paddr, gru_end_paddr;
 static union uvh_apicid uvh_apicid;
 int uv_min_hub_revision_id;
 EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
+unsigned int uv_apicid_hibits;
+EXPORT_SYMBOL_GPL(uv_apicid_hibits);
 static DEFINE_SPINLOCK(uv_nmi_lock);
 
 static inline bool is_GRU_range(u64 start, u64 end)
@@ -85,6 +87,23 @@ static void __init early_get_apic_pnode_shift(void)
 		uvh_apicid.s.pnode_shift = UV_APIC_PNODE_SHIFT;
 }
 
+/*
+ * Add an extra bit as dictated by bios to the destination apicid of
+ * interrupts potentially passing through the UV HUB.  This prevents
+ * a deadlock between interrupts and IO port operations.
+ */
+static void __init uv_set_apicid_hibit(void)
+{
+	union uvh_lb_target_physical_apic_id_mask_u apicid_mask;
+	unsigned long *mmr;
+
+	mmr = early_ioremap(UV_LOCAL_MMR_BASE |
+		UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK, sizeof(*mmr));
+	apicid_mask.v = *mmr;
+	early_iounmap(mmr, sizeof(*mmr));
+	uv_apicid_hibits = apicid_mask.s.bit_enables & UV_APICID_HIBIT_MASK;
+}
+
 static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	int nodeid;
@@ -102,6 +121,7 @@ static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 			__get_cpu_var(x2apic_extra_bits) =
 				nodeid << (uvh_apicid.s.pnode_shift - 1);
 			uv_system_type = UV_NON_UNIQUE_APIC;
+			uv_set_apicid_hibit();
 			return 1;
 		}
 	}
@@ -155,6 +175,7 @@ static int __cpuinit uv_wakeup_secondary(int phys_apicid, unsigned long start_ri
 	int pnode;
 
 	pnode = uv_apicid_to_pnode(phys_apicid);
+	phys_apicid |= uv_apicid_hibits;
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
 	    ((start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
@@ -236,7 +257,7 @@ static unsigned int uv_cpu_mask_to_apicid(const struct cpumask *cpumask)
 	int cpu = cpumask_first(cpumask);
 
 	if ((unsigned)cpu < nr_cpu_ids)
-		return per_cpu(x86_cpu_to_apicid, cpu);
+		return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
 	else
 		return BAD_APICID;
 }
@@ -255,7 +276,7 @@ uv_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 		if (cpumask_test_cpu(cpu, cpu_online_mask))
 			break;
 	}
-	return per_cpu(x86_cpu_to_apicid, cpu);
+	return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
 }
 
 static unsigned int x2apic_get_apic_id(unsigned long x)
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index a318194002b5..ba9caa808a9c 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -1455,7 +1455,7 @@ static void __init uv_init_uvhub(int uvhub, int vector)
 	 * the below initialization can't be in firmware because the
 	 * messaging IRQ will be determined by the OS
 	 */
-	apicid = uvhub_to_first_apicid(uvhub);
+	apicid = uvhub_to_first_apicid(uvhub) | uv_apicid_hibits;
 	uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
 				      ((apicid << 32) | vector));
 }
diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c
index 56e421bc379b..9daf5d1af9f1 100644
--- a/arch/x86/platform/uv/uv_time.c
+++ b/arch/x86/platform/uv/uv_time.c
@@ -89,6 +89,7 @@ static void uv_rtc_send_IPI(int cpu)
 
 	apicid = cpu_physical_id(cpu);
 	pnode = uv_apicid_to_pnode(apicid);
+	apicid |= uv_apicid_hibits;
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	      (apicid << UVH_IPI_INT_APIC_ID_SHFT) |
 	      (X86_PLATFORM_IPI_VECTOR << UVH_IPI_INT_VECTOR_SHFT);
@@ -107,6 +108,7 @@ static int uv_intr_pending(int pnode)
 static int uv_setup_intr(int cpu, u64 expires)
 {
 	u64 val;
+	unsigned long apicid = cpu_physical_id(cpu) | uv_apicid_hibits;
 	int pnode = uv_cpu_to_pnode(cpu);
 
 	uv_write_global_mmr64(pnode, UVH_RTC1_INT_CONFIG,
@@ -117,7 +119,7 @@ static int uv_setup_intr(int cpu, u64 expires)
 		UVH_EVENT_OCCURRED0_RTC1_MASK);
 
 	val = (X86_PLATFORM_IPI_VECTOR << UVH_RTC1_INT_CONFIG_VECTOR_SHFT) |
-		((u64)cpu_physical_id(cpu) << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);
+		((u64)apicid << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);
 
 	/* Set configuration */
 	uv_write_global_mmr64(pnode, UVH_RTC1_INT_CONFIG, val);

From fb762a5b37e74023f1793cdf64e40d4da38b30ec Mon Sep 17 00:00:00 2001
From: Jesse Marroquin <jesse.marroquin@maxim-ic.com>
Date: Wed, 17 Nov 2010 14:26:40 -0600
Subject: [PATCH 0753/1066] ASoC: Add support for MAX98089 CODEC

This patch adds initial support for the MAX98089 CODEC.

Signed-off-by: Jesse Marroquin <jesse.marroquin@maxim-ic.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/max98088.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c
index bc22ee93a75d..470cb93b1d1f 100644
--- a/sound/soc/codecs/max98088.c
+++ b/sound/soc/codecs/max98088.c
@@ -28,6 +28,11 @@
 #include <sound/max98088.h>
 #include "max98088.h"
 
+enum max98088_type {
+       MAX98088,
+       MAX98089,
+};
+
 struct max98088_cdata {
        unsigned int rate;
        unsigned int fmt;
@@ -36,6 +41,7 @@ struct max98088_cdata {
 
 struct max98088_priv {
        u8 reg_cache[M98088_REG_CNT];
+       enum max98088_type devtype;
        void *control_data;
        struct max98088_pdata *pdata;
        unsigned int sysclk;
@@ -2040,6 +2046,8 @@ static int max98088_i2c_probe(struct i2c_client *i2c,
        if (max98088 == NULL)
                return -ENOMEM;
 
+       max98088->devtype = id->driver_data;
+
        i2c_set_clientdata(i2c, max98088);
        max98088->control_data = i2c;
        max98088->pdata = i2c->dev.platform_data;
@@ -2059,7 +2067,8 @@ static int __devexit max98088_i2c_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id max98088_i2c_id[] = {
-       { "max98088", 0 },
+       { "max98088", MAX98088 },
+       { "max98089", MAX98089 },
        { }
 };
 MODULE_DEVICE_TABLE(i2c, max98088_i2c_id);

From b5482cfa1c95a188b3054fa33274806add91bbe5 Mon Sep 17 00:00:00 2001
From: Alex Shi <alex.shi@intel.com>
Date: Tue, 16 Nov 2010 17:34:02 +0800
Subject: [PATCH 0754/1066] sched: Fix volanomark performance regression

Commit fab4762 triggers excessive idle balancing, causing a ~30% loss in
volanomark throughput. Remove idle balancing throttle reset.

Originally-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Nikhil Rao <ncrao@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1289928732.5169.211.camel@maggy.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_fair.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 52ab113d8bb9..ba0556dc7c06 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1758,10 +1758,6 @@ static void pull_task(struct rq *src_rq, struct task_struct *p,
 	set_task_cpu(p, this_cpu);
 	activate_task(this_rq, p, 0);
 	check_preempt_curr(this_rq, p, 0);
-
-	/* re-arm NEWIDLE balancing when moving tasks */
-	src_rq->avg_idle = this_rq->avg_idle = 2*sysctl_sched_migration_cost;
-	this_rq->idle_stamp = 0;
 }
 
 /*

From d5ad140bc1505a98c0f040937125bfcbb508078f Mon Sep 17 00:00:00 2001
From: Nikhil Rao <ncrao@google.com>
Date: Wed, 17 Nov 2010 11:42:04 -0800
Subject: [PATCH 0755/1066] sched: Fix idle balancing

An earlier commit reverts idle balancing throttling reset to fix a 30%
regression in volanomark throughput. We still need to reset idle_stamp
when we pull a task in newidle balance.

Reported-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Nikhil Rao <ncrao@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290022924-3548-1-git-send-email-ncrao@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_fair.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index ba0556dc7c06..00ebd7686676 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -3215,8 +3215,10 @@ static void idle_balance(int this_cpu, struct rq *this_rq)
 		interval = msecs_to_jiffies(sd->balance_interval);
 		if (time_after(next_balance, sd->last_balance + interval))
 			next_balance = sd->last_balance + interval;
-		if (pulled_task)
+		if (pulled_task) {
+			this_rq->idle_stamp = 0;
 			break;
+		}
 	}
 
 	raw_spin_lock(&this_rq->lock);

From 8882135bcd332f294df5455747ea43ba9e6f77ad Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Tue, 9 Nov 2010 19:01:43 +0100
Subject: [PATCH 0756/1066] perf: Fix owner-list vs exit

Oleg noticed that a perf-fd keeping a reference on the creating task
leads to a few funny side effects.

There's two different aspects to this:

  - kernel based perf-events, these should not take out
    a reference on the creating task and appear on the task's
    event list since they're not bound to fds nor visible
    to userspace.

  - fork() and pthread_create(), these can lead to the creating
    task dying (and thus the task's event-list becomming useless)
    but keeping the list and ref alive until the event is closed.

Combined they lead to malfunction of the ptrace hw_tracepoints.

Cure this by not considering kernel based perf_events for the
owner-list and destroying the owner-list when the owner dies.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Oleg Nesterov <oleg@redhat.com>
LKML-Reference: <1289576883.2084.286.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/perf_event.c | 63 ++++++++++++++++++++++++++++++++++++---------
 1 file changed, 51 insertions(+), 12 deletions(-)

diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index f818d9d2dc93..671f6c8c8a32 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -2235,11 +2235,6 @@ int perf_event_release_kernel(struct perf_event *event)
 	raw_spin_unlock_irq(&ctx->lock);
 	mutex_unlock(&ctx->mutex);
 
-	mutex_lock(&event->owner->perf_event_mutex);
-	list_del_init(&event->owner_entry);
-	mutex_unlock(&event->owner->perf_event_mutex);
-	put_task_struct(event->owner);
-
 	free_event(event);
 
 	return 0;
@@ -2252,9 +2247,43 @@ EXPORT_SYMBOL_GPL(perf_event_release_kernel);
 static int perf_release(struct inode *inode, struct file *file)
 {
 	struct perf_event *event = file->private_data;
+	struct task_struct *owner;
 
 	file->private_data = NULL;
 
+	rcu_read_lock();
+	owner = ACCESS_ONCE(event->owner);
+	/*
+	 * Matches the smp_wmb() in perf_event_exit_task(). If we observe
+	 * !owner it means the list deletion is complete and we can indeed
+	 * free this event, otherwise we need to serialize on
+	 * owner->perf_event_mutex.
+	 */
+	smp_read_barrier_depends();
+	if (owner) {
+		/*
+		 * Since delayed_put_task_struct() also drops the last
+		 * task reference we can safely take a new reference
+		 * while holding the rcu_read_lock().
+		 */
+		get_task_struct(owner);
+	}
+	rcu_read_unlock();
+
+	if (owner) {
+		mutex_lock(&owner->perf_event_mutex);
+		/*
+		 * We have to re-check the event->owner field, if it is cleared
+		 * we raced with perf_event_exit_task(), acquiring the mutex
+		 * ensured they're done, and we can proceed with freeing the
+		 * event.
+		 */
+		if (event->owner)
+			list_del_init(&event->owner_entry);
+		mutex_unlock(&owner->perf_event_mutex);
+		put_task_struct(owner);
+	}
+
 	return perf_event_release_kernel(event);
 }
 
@@ -5678,7 +5707,7 @@ SYSCALL_DEFINE5(perf_event_open,
 	mutex_unlock(&ctx->mutex);
 
 	event->owner = current;
-	get_task_struct(current);
+
 	mutex_lock(&current->perf_event_mutex);
 	list_add_tail(&event->owner_entry, &current->perf_event_list);
 	mutex_unlock(&current->perf_event_mutex);
@@ -5746,12 +5775,6 @@ perf_event_create_kernel_counter(struct perf_event_attr *attr, int cpu,
 	++ctx->generation;
 	mutex_unlock(&ctx->mutex);
 
-	event->owner = current;
-	get_task_struct(current);
-	mutex_lock(&current->perf_event_mutex);
-	list_add_tail(&event->owner_entry, &current->perf_event_list);
-	mutex_unlock(&current->perf_event_mutex);
-
 	return event;
 
 err_free:
@@ -5902,8 +5925,24 @@ again:
  */
 void perf_event_exit_task(struct task_struct *child)
 {
+	struct perf_event *event, *tmp;
 	int ctxn;
 
+	mutex_lock(&child->perf_event_mutex);
+	list_for_each_entry_safe(event, tmp, &child->perf_event_list,
+				 owner_entry) {
+		list_del_init(&event->owner_entry);
+
+		/*
+		 * Ensure the list deletion is visible before we clear
+		 * the owner, closes a race against perf_release() where
+		 * we need to serialize on the owner->perf_event_mutex.
+		 */
+		smp_wmb();
+		event->owner = NULL;
+	}
+	mutex_unlock(&child->perf_event_mutex);
+
 	for_each_task_context_nr(ctxn)
 		perf_event_exit_task_context(child, ctxn);
 }

From 94e8ba728640dc01375a14e337f3b892bfacbeeb Mon Sep 17 00:00:00 2001
From: Sergio Aguirre <saaguirre@ti.com>
Date: Tue, 16 Nov 2010 12:02:47 -0600
Subject: [PATCH 0757/1066] irq_work: Drop cmpxchg() result

The compiler warned us about:

 kernel/irq_work.c: In function 'irq_work_run':
 kernel/irq_work.c:148: warning: value computed is not used

Dropping the cmpxchg() result is indeed weird, but correct -
so annotate away the warning.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1289930567-17828-1-git-send-email-saaguirre@ti.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/irq_work.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/irq_work.c b/kernel/irq_work.c
index f16763ff8481..90f881904bb1 100644
--- a/kernel/irq_work.c
+++ b/kernel/irq_work.c
@@ -145,7 +145,9 @@ void irq_work_run(void)
 		 * Clear the BUSY bit and return to the free state if
 		 * no-one else claimed it meanwhile.
 		 */
-		cmpxchg(&entry->next, next_flags(NULL, IRQ_WORK_BUSY), NULL);
+		(void)cmpxchg(&entry->next,
+			      next_flags(NULL, IRQ_WORK_BUSY),
+			      NULL);
 	}
 }
 EXPORT_SYMBOL_GPL(irq_work_run);

From de31ec8a31046111befd16a7083e3bdda2ff42cf Mon Sep 17 00:00:00 2001
From: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Date: Thu, 18 Nov 2010 19:16:55 +0900
Subject: [PATCH 0758/1066] x86/kprobes: Prevent kprobes to probe on
 save_args()

Prevent kprobes to probe on save_args() since this function
will be called from breakpoint exception handler. That will
cause infinit loop on breakpoint handling.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
LKML-Reference: <20101118101655.2779.2816.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/entry_64.S | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index fe2690d71c0c..e3ba417e8697 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -295,6 +295,7 @@ ENDPROC(native_usergs_sysret64)
 	.endm
 
 /* save partial stack frame */
+	.pushsection .kprobes.text, "ax"
 ENTRY(save_args)
 	XCPT_FRAME
 	cld
@@ -334,6 +335,7 @@ ENTRY(save_args)
 	ret
 	CFI_ENDPROC
 END(save_args)
+	.popsection
 
 ENTRY(save_rest)
 	PARTIAL_FRAME 1 REST_SKIP+8

From 37db6c8f1d0c4b8f01dc049f3a893b725288660f Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Tue, 16 Nov 2010 08:25:08 +0000
Subject: [PATCH 0759/1066] x86-64: Fix and clean up AMD Fam10 MMCONF enabling

Candidate memory ranges were not calculated properly (start
addresses got needlessly rounded down, and end addresses didn't
get rounded up at all), address comparison for secondary CPUs
was done on only part of the address, and disabled status wasn't
tracked properly.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <4CE24DF40200007800022737@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/msr-index.h   |  2 +-
 arch/x86/kernel/mmconf-fam10h_64.c | 64 ++++++++++++++----------------
 2 files changed, 31 insertions(+), 35 deletions(-)

diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 3ea3dc487047..6b89f5e86021 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -128,7 +128,7 @@
 #define FAM10H_MMIO_CONF_ENABLE		(1<<0)
 #define FAM10H_MMIO_CONF_BUSRANGE_MASK	0xf
 #define FAM10H_MMIO_CONF_BUSRANGE_SHIFT 2
-#define FAM10H_MMIO_CONF_BASE_MASK	0xfffffff
+#define FAM10H_MMIO_CONF_BASE_MASK	0xfffffffULL
 #define FAM10H_MMIO_CONF_BASE_SHIFT	20
 #define MSR_FAM10H_NODE_ID		0xc001100c
 
diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c
index 6da143c2a6b8..ac861b8348e2 100644
--- a/arch/x86/kernel/mmconf-fam10h_64.c
+++ b/arch/x86/kernel/mmconf-fam10h_64.c
@@ -25,7 +25,6 @@ struct pci_hostbridge_probe {
 };
 
 static u64 __cpuinitdata fam10h_pci_mmconf_base;
-static int __cpuinitdata fam10h_pci_mmconf_base_status;
 
 static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = {
 	{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 },
@@ -44,10 +43,12 @@ static int __cpuinit cmp_range(const void *x1, const void *x2)
 	return start1 - start2;
 }
 
-/*[47:0] */
-/* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */
+#define MMCONF_UNIT (1ULL << FAM10H_MMIO_CONF_BASE_SHIFT)
+#define MMCONF_MASK (~(MMCONF_UNIT - 1))
+#define MMCONF_SIZE (MMCONF_UNIT << 8)
+/* need to avoid (0xfd<<32), (0xfe<<32), and (0xff<<32), ht used space */
 #define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32)
-#define BASE_VALID(b) ((b != (0xfdULL << 32)) && (b != (0xfeULL << 32)))
+#define BASE_VALID(b) ((b) + MMCONF_SIZE <= (0xfdULL<<32) || (b) >= (1ULL<<40))
 static void __cpuinit get_fam10h_pci_mmconf_base(void)
 {
 	int i;
@@ -64,12 +65,11 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
 	struct range range[8];
 
 	/* only try to get setting from BSP */
-	/* -1 or 1 */
-	if (fam10h_pci_mmconf_base_status)
+	if (fam10h_pci_mmconf_base)
 		return;
 
 	if (!early_pci_allowed())
-		goto fail;
+		return;
 
 	found = 0;
 	for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
@@ -91,7 +91,7 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
 	}
 
 	if (!found)
-		goto fail;
+		return;
 
 	/* SYS_CFG */
 	address = MSR_K8_SYSCFG;
@@ -99,16 +99,16 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
 
 	/* TOP_MEM2 is not enabled? */
 	if (!(val & (1<<21))) {
-		tom2 = 0;
+		tom2 = 1ULL << 32;
 	} else {
 		/* TOP_MEM2 */
 		address = MSR_K8_TOP_MEM2;
 		rdmsrl(address, val);
-		tom2 = val & (0xffffULL<<32);
+		tom2 = max(val & 0xffffff800000ULL, 1ULL << 32);
 	}
 
 	if (base <= tom2)
-		base = tom2 + (1ULL<<32);
+		base = (tom2 + 2 * MMCONF_UNIT - 1) & MMCONF_MASK;
 
 	/*
 	 * need to check if the range is in the high mmio range that is
@@ -123,11 +123,11 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
 		if (!(reg & 3))
 			continue;
 
-		start = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/
+		start = (u64)(reg & 0xffffff00) << 8; /* 39:16 on 31:8*/
 		reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3));
-		end = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/
+		end = ((u64)(reg & 0xffffff00) << 8) | 0xffff; /* 39:16 on 31:8*/
 
-		if (!end)
+		if (end < tom2)
 			continue;
 
 		range[hi_mmio_num].start = start;
@@ -143,32 +143,27 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
 
 	if (range[hi_mmio_num - 1].end < base)
 		goto out;
-	if (range[0].start > base)
+	if (range[0].start > base + MMCONF_SIZE)
 		goto out;
 
 	/* need to find one window */
-	base = range[0].start - (1ULL << 32);
+	base = (range[0].start & MMCONF_MASK) - MMCONF_UNIT;
 	if ((base > tom2) && BASE_VALID(base))
 		goto out;
-	base = range[hi_mmio_num - 1].end + (1ULL << 32);
-	if ((base > tom2) && BASE_VALID(base))
+	base = (range[hi_mmio_num - 1].end + MMCONF_UNIT) & MMCONF_MASK;
+	if (BASE_VALID(base))
 		goto out;
 	/* need to find window between ranges */
-	if (hi_mmio_num > 1)
-	for (i = 0; i < hi_mmio_num - 1; i++) {
-		if (range[i + 1].start > (range[i].end + (1ULL << 32))) {
-			base = range[i].end + (1ULL << 32);
-			if ((base > tom2) && BASE_VALID(base))
-				goto out;
-		}
+	for (i = 1; i < hi_mmio_num; i++) {
+		base = (range[i - 1].end + MMCONF_UNIT) & MMCONF_MASK;
+		val = range[i].start & MMCONF_MASK;
+		if (val >= base + MMCONF_SIZE && BASE_VALID(base))
+			goto out;
 	}
-
-fail:
-	fam10h_pci_mmconf_base_status = -1;
 	return;
+
 out:
 	fam10h_pci_mmconf_base = base;
-	fam10h_pci_mmconf_base_status = 1;
 }
 
 void __cpuinit fam10h_check_enable_mmcfg(void)
@@ -190,11 +185,10 @@ void __cpuinit fam10h_check_enable_mmcfg(void)
 
 		/* only trust the one handle 256 buses, if acpi=off */
 		if (!acpi_pci_disabled || busnbits >= 8) {
-			u64 base;
-			base = val & (0xffffULL << 32);
-			if (fam10h_pci_mmconf_base_status <= 0) {
+			u64 base = val & MMCONF_MASK;
+
+			if (!fam10h_pci_mmconf_base) {
 				fam10h_pci_mmconf_base = base;
-				fam10h_pci_mmconf_base_status = 1;
 				return;
 			} else if (fam10h_pci_mmconf_base ==  base)
 				return;
@@ -206,8 +200,10 @@ void __cpuinit fam10h_check_enable_mmcfg(void)
 	 * with 256 buses
 	 */
 	get_fam10h_pci_mmconf_base();
-	if (fam10h_pci_mmconf_base_status <= 0)
+	if (!fam10h_pci_mmconf_base) {
+		pci_probe &= ~PCI_CHECK_ENABLE_AMD_MMCONF;
 		return;
+	}
 
 	printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n");
 	val &= ~((FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT) |

From 09a02fdb919876c01e8f05960750a418b3f7fa48 Mon Sep 17 00:00:00 2001
From: Mark Mentovai <mark@moxienet.com>
Date: Wed, 17 Nov 2010 16:34:37 -0500
Subject: [PATCH 0760/1066] cfg80211: fix can_beacon_sec_chan, reenable HT40

This follows wireless-testing 9236d838c920e90708570d9bbd7bb82d30a38130
("cfg80211: fix extension channel checks to initiate communication") and
fixes accidental case fall-through. Without this fix, HT40 is entirely
blocked.

Signed-off-by: Mark Mentovai <mark@moxienet.com>
Cc: stable@kernel.org
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/wireless/chan.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index c8d190d911e4..17cd0c04d139 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -54,8 +54,10 @@ static bool can_beacon_sec_chan(struct wiphy *wiphy,
 	switch (channel_type) {
 	case NL80211_CHAN_HT40PLUS:
 		diff = 20;
+		break;
 	case NL80211_CHAN_HT40MINUS:
 		diff = -20;
+		break;
 	default:
 		return false;
 	}

From 3105c19c450ac7c18ab28c19d364b588767261b3 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Thu, 18 Nov 2010 09:15:07 -0800
Subject: [PATCH 0761/1066] ceph: fix readdir EOVERFLOW on 32-bit archs

One of the readdir filldir_t callers was passing the raw ceph 64-bit ino
instead of the hashed 32-bit one, producing an EOVERFLOW in the filler
callback.  Fix this by calling the ceph_vino_to_ino() helper to do the
conversion.

Reported-by: Jan Smets <jan.smets@alcatel-lucent.com>
Tested-by: Jan Smets <jan.smets@alcatel-lucent.com>
Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/dir.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 5f67728ba4d7..7d447af84ec4 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -358,18 +358,22 @@ more:
 		u64 pos = ceph_make_fpos(frag, off);
 		struct ceph_mds_reply_inode *in =
 			rinfo->dir_in[off - fi->offset].in;
+		struct ceph_vino vino;
+		ino_t ino;
+
 		dout("readdir off %d (%d/%d) -> %lld '%.*s' %p\n",
 		     off, off - fi->offset, rinfo->dir_nr, pos,
 		     rinfo->dir_dname_len[off - fi->offset],
 		     rinfo->dir_dname[off - fi->offset], in);
 		BUG_ON(!in);
 		ftype = le32_to_cpu(in->mode) >> 12;
+		vino.ino = le64_to_cpu(in->ino);
+		vino.snap = le64_to_cpu(in->snapid);
+		ino = ceph_vino_to_ino(vino);
 		if (filldir(dirent,
 			    rinfo->dir_dname[off - fi->offset],
 			    rinfo->dir_dname_len[off - fi->offset],
-			    pos,
-			    le64_to_cpu(in->ino),
-			    ftype) < 0) {
+			    pos, ino, ftype) < 0) {
 			dout("filldir stopping us...\n");
 			return 0;
 		}

From de391d12500ede13faa7ecadbe900a8de1f76cfa Mon Sep 17 00:00:00 2001
From: Mattia Dongili <malattia@linux.it>
Date: Thu, 18 Nov 2010 09:06:43 -0800
Subject: [PATCH 0762/1066] Input: fix typo in keycode validation supporting
 large scancodes

Check the input_keymap_entry keycode size (u32) instead of the device's
(void*) when validating that keycode value can be stored in the keymap.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=22722

Signed-off-by: Mattia Dongili <malattia@linux.it>
Tested-by: Norbert Preining <preining@logic.at>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/input.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/input.c b/drivers/input/input.c
index 7f26ca6ecf75..5edc41aa08f8 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -753,7 +753,7 @@ static int input_default_setkeycode(struct input_dev *dev,
 	if (index >= dev->keycodemax)
 		return -EINVAL;
 
-	if (dev->keycodesize < sizeof(dev->keycode) &&
+	if (dev->keycodesize < sizeof(ke->keycode) &&
 			(ke->keycode >> (dev->keycodesize * 8)))
 		return -EINVAL;
 

From 3006bc38895895f1a0352c2e17e1a503f35f7e2f Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Thu, 18 Nov 2010 09:30:42 -0800
Subject: [PATCH 0763/1066] bonding: fix a race in IGMP handling

RCU conversion in IGMP code done in net-next-2.6 raised a race in
__bond_resend_igmp_join_requests().

It iterates in_dev->mc_list without appropriate protection (RTNL, or
read_lock on in_dev->mc_list_lock).

Another cpu might delete an entry while we use it and trigger a fault.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index bdb68a600382..71a169740d05 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -878,8 +878,10 @@ static void __bond_resend_igmp_join_requests(struct net_device *dev)
 	rcu_read_lock();
 	in_dev = __in_dev_get_rcu(dev);
 	if (in_dev) {
+		read_lock(&in_dev->mc_list_lock);
 		for (im = in_dev->mc_list; im; im = im->next)
 			ip_mc_rejoin_group(im);
+		read_unlock(&in_dev->mc_list_lock);
 	}
 
 	rcu_read_unlock();

From b52b97a339c0f2d76dfd6a31466d3f1b05c5cf7e Mon Sep 17 00:00:00 2001
From: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Date: Thu, 18 Nov 2010 09:32:02 -0800
Subject: [PATCH 0764/1066] MAINTAINERS: Add stmmac maintainer

Add STMMAC to the list of supported Ethernet drivers
and myself as maintainer.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 88b74a75d932..8b6ca96435ee 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1829,6 +1829,13 @@ W:	http://www.chelsio.com
 S:	Supported
 F:	drivers/net/cxgb4vf/
 
+STMMAC ETHERNET DRIVER
+M:	Giuseppe Cavallaro <peppe.cavallaro@st.com>
+L:	netdev@vger.kernel.org
+W:	http://www.stlinux.com
+S:	Supported
+F:	drivers/net/stmmac/
+
 CYBERPRO FB DRIVER
 M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)

From ef22b7b65f0eda9015becc7bff225a399914a242 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Thu, 18 Nov 2010 09:40:04 -0800
Subject: [PATCH 0765/1066] net: Fix duplicate volatile warning.

jiffies is defined as "volatile".

  extern unsigned long volatile __jiffy_data jiffies;

ACCESS_ONCE() uses "volatile".
As a result, some compilers warn duplicate `volatile' for ACCESS_ONCE(jiffies).

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/neighbour.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/net/neighbour.h b/include/net/neighbour.h
index 55590ab16b3e..6beb1ffc2b7f 100644
--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
@@ -303,7 +303,7 @@ static inline void neigh_confirm(struct neighbour *neigh)
 
 static inline int neigh_event_send(struct neighbour *neigh, struct sk_buff *skb)
 {
-	unsigned long now = ACCESS_ONCE(jiffies);
+	unsigned long now = jiffies;
 	
 	if (neigh->used != now)
 		neigh->used = now;

From 7d8e76bf9ac3604897f0ce12e8bf09b68c2a2c89 Mon Sep 17 00:00:00 2001
From: John Fastabend <john.r.fastabend@intel.com>
Date: Tue, 16 Nov 2010 19:42:53 +0000
Subject: [PATCH 0766/1066] net: zero kobject in rx_queue_release

netif_set_real_num_rx_queues() can decrement and increment
the number of rx queues. For example ixgbe does this as
features and offloads are toggled. Presumably this could
also happen across down/up on most devices if the available
resources changed (cpu offlined).

The kobject needs to be zero'd in this case so that the
state is not preserved across kobject_put()/kobject_init_and_add().

This resolves the following error report.

ixgbe 0000:03:00.0: eth2: NIC Link is Up 10 Gbps, Flow Control: RX/TX
kobject (ffff880324b83210): tried to init an initialized object, something is seriously wrong.
Pid: 1972, comm: lldpad Not tainted 2.6.37-rc18021qaz+ #169
Call Trace:
 [<ffffffff8121c940>] kobject_init+0x3a/0x83
 [<ffffffff8121cf77>] kobject_init_and_add+0x23/0x57
 [<ffffffff8107b800>] ? mark_lock+0x21/0x267
 [<ffffffff813c6d11>] net_rx_queue_update_kobjects+0x63/0xc6
 [<ffffffff813b5e0e>] netif_set_real_num_rx_queues+0x5f/0x78
 [<ffffffffa0261d49>] ixgbe_set_num_queues+0x1c6/0x1ca [ixgbe]
 [<ffffffffa0262509>] ixgbe_init_interrupt_scheme+0x1e/0x79c [ixgbe]
 [<ffffffffa0274596>] ixgbe_dcbnl_set_state+0x167/0x189 [ixgbe]

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/net-sysfs.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index a5ff5a89f376..7f902cad10f8 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -712,15 +712,21 @@ static void rx_queue_release(struct kobject *kobj)
 
 
 	map = rcu_dereference_raw(queue->rps_map);
-	if (map)
+	if (map) {
+		RCU_INIT_POINTER(queue->rps_map, NULL);
 		call_rcu(&map->rcu, rps_map_release);
+	}
 
 	flow_table = rcu_dereference_raw(queue->rps_flow_table);
-	if (flow_table)
+	if (flow_table) {
+		RCU_INIT_POINTER(queue->rps_flow_table, NULL);
 		call_rcu(&flow_table->rcu, rps_dev_flow_table_release);
+	}
 
 	if (atomic_dec_and_test(&first->count))
 		kfree(first);
+	else
+		memset(kobj, 0, sizeof(*kobj));
 }
 
 static struct kobj_type rx_queue_ktype = {

From 3bf30b56c4f0a1c4fae34050b7db4527c92891e8 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanoharan@atheros.com>
Date: Thu, 18 Nov 2010 12:19:52 +0530
Subject: [PATCH 0767/1066] ath9k_htc: Avoid setting QoS control for non-QoS
 frames

Setting tid information in the TX header is required only for QoS
frames. Not handling this case causes severe data loss with some APs.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index 3d19b5bc937f..29d80ca78393 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -121,7 +121,7 @@ int ath9k_htc_tx_start(struct ath9k_htc_priv *priv, struct sk_buff *skb)
 			tx_hdr.data_type = ATH9K_HTC_NORMAL;
 		}
 
-		if (ieee80211_is_data(fc)) {
+		if (ieee80211_is_data_qos(fc)) {
 			qc = ieee80211_get_qos_ctl(hdr);
 			tx_hdr.tidno = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
 		}

From 8ea91226eccf6c8ab9c55054b24c21021d4d9d19 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segoon@openwall.com>
Date: Thu, 18 Nov 2010 10:35:58 -0800
Subject: [PATCH 0768/1066] net: caif: spi: fix potential NULL dereference

alloc_netdev() is not checked here for NULL return value.  dev is
check instead.  It might lead to NULL dereference of ndev.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/caif/caif_spi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/caif/caif_spi.c b/drivers/net/caif/caif_spi.c
index 8b4cea57a6c5..20da1996d354 100644
--- a/drivers/net/caif/caif_spi.c
+++ b/drivers/net/caif/caif_spi.c
@@ -635,8 +635,8 @@ int cfspi_spi_probe(struct platform_device *pdev)
 
 	ndev = alloc_netdev(sizeof(struct cfspi),
 			"cfspi%d", cfspi_setup);
-	if (!dev)
-		return -ENODEV;
+	if (!ndev)
+		return -ENOMEM;
 
 	cfspi = netdev_priv(ndev);
 	netif_stop_queue(ndev);

From 1aa46ec91cfd3cc4ab19780f664a3d089bb67173 Mon Sep 17 00:00:00 2001
From: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Date: Sat, 13 Nov 2010 13:42:08 +0000
Subject: [PATCH 0769/1066] ipg.c: remove id [SUNDANCE, 0x1021]

ipg.c:
  The id [SUNDANCE, 0x1021] (=[0x13f0, 0x1021]) is defined
  at dl2k.h and ipg.c.
  But this device works better with dl2k driver.

  This problem is similar with the commit
  [25cca5352712561fba97bd37c495593d641c1d39
  ipg: Remove device claimed by dl2k from pci id table]
  at 11 Feb 2010.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ipg.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index dc0198092343..aa93655c3aa7 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -88,16 +88,14 @@ static const char *ipg_brand_name[] = {
 	"IC PLUS IP1000 1000/100/10 based NIC",
 	"Sundance Technology ST2021 based NIC",
 	"Tamarack Microelectronics TC9020/9021 based NIC",
-	"Tamarack Microelectronics TC9020/9021 based NIC",
 	"D-Link NIC IP1000A"
 };
 
 static DEFINE_PCI_DEVICE_TABLE(ipg_pci_tbl) = {
 	{ PCI_VDEVICE(SUNDANCE,	0x1023), 0 },
 	{ PCI_VDEVICE(SUNDANCE,	0x2021), 1 },
-	{ PCI_VDEVICE(SUNDANCE,	0x1021), 2 },
-	{ PCI_VDEVICE(DLINK,	0x9021), 3 },
-	{ PCI_VDEVICE(DLINK,	0x4020), 4 },
+	{ PCI_VDEVICE(DLINK,	0x9021), 2 },
+	{ PCI_VDEVICE(DLINK,	0x4020), 3 },
 	{ 0, }
 };
 

From d530db0db90378b5674cb78d9c0cfcc83f851a5e Mon Sep 17 00:00:00 2001
From: Namhyung Kim <namhyung@gmail.com>
Date: Tue, 16 Nov 2010 05:27:51 +0000
Subject: [PATCH 0770/1066] 3c59x: fix build failure on !CONFIG_PCI

VORTEX_PCI() could return NULL so it needs to be casted before
accessing any member of struct pci_dev. This fixes following
build failure. Likewise VORTEX_EISA() was changed also.

  CC [M]  drivers/net/3c59x.o
drivers/net/3c59x.c: In function 'acpi_set_WOL':
drivers/net/3c59x.c:3211:39: warning: dereferencing 'void *' pointer
drivers/net/3c59x.c:3211:39: error: request for member 'current_state' in something not a structure or union
make[3]: *** [drivers/net/3c59x.o] Error 1
make[2]: *** [drivers/net/3c59x.o] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/3c59x.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index e1da258bbfb7..0a92436f0538 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -699,7 +699,8 @@ DEFINE_WINDOW_IO(32)
 #define DEVICE_PCI(dev) NULL
 #endif
 
-#define VORTEX_PCI(vp) (((vp)->gendev) ? DEVICE_PCI((vp)->gendev) : NULL)
+#define VORTEX_PCI(vp)							\
+	((struct pci_dev *) (((vp)->gendev) ? DEVICE_PCI((vp)->gendev) : NULL))
 
 #ifdef CONFIG_EISA
 #define DEVICE_EISA(dev) (((dev)->bus == &eisa_bus_type) ? to_eisa_device((dev)) : NULL)
@@ -707,7 +708,8 @@ DEFINE_WINDOW_IO(32)
 #define DEVICE_EISA(dev) NULL
 #endif
 
-#define VORTEX_EISA(vp) (((vp)->gendev) ? DEVICE_EISA((vp)->gendev) : NULL)
+#define VORTEX_EISA(vp)							\
+	((struct eisa_device *) (((vp)->gendev) ? DEVICE_EISA((vp)->gendev) : NULL))
 
 /* The action to take with a media selection timer tick.
    Note that we deviate from the 3Com order by checking 10base2 before AUI.

From ed1d77b18c9f4ff06d5b42c65041aa55a1447053 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 18 Nov 2010 10:56:29 -0800
Subject: [PATCH 0771/1066] hardirq.h: needs sched.h if using BKL

This really isn't the right thing to do, and strictly speaking we should
have the BKL depth count in the thread info right next to the preempt
count.  The two really do go together.

However, since that would involve a patch to all architectures, and the
BKL is finally going away, it's simply not worth the effort to do the
RightThing(tm).  Just re-instate the <linux/sched.h> include that we
used to get accidentally from the smp_lock.h one.

This is all fallout from the same old "BKL: remove extraneous #include
<smp_lock.h>" commit.

Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/hardirq.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 714da7e5d10c..32f9fd6619b4 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -94,6 +94,7 @@
 #define in_nmi()	(preempt_count() & NMI_MASK)
 
 #if defined(CONFIG_PREEMPT) && defined(CONFIG_BKL)
+# include <linux/sched.h>
 # define PREEMPT_INATOMIC_BASE (current->lock_depth >= 0)
 #else
 # define PREEMPT_INATOMIC_BASE 0

From 93908d192686d8285dd6441ff855df92a40103d2 Mon Sep 17 00:00:00 2001
From: Thomas Graf <tgraf@infradead.org>
Date: Wed, 17 Nov 2010 01:44:24 +0000
Subject: [PATCH 0772/1066] ipv6: Expose IFLA_PROTINFO timer values in msecs
 instead of jiffies

IFLA_PROTINFO exposes timer related per device settings in jiffies.
Change it to expose these values in msecs like the sysctl interface
does.

I did not find any users of IFLA_PROTINFO which rely on any of these
values and even if there are, they are likely already broken because
there is no way for them to reliably convert such a value to another
time format.

Signed-off-by: Thomas Graf <tgraf@infradead.org>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/addrconf.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index b41ce0f0d514..52b7df74e4c7 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -3798,8 +3798,10 @@ static inline void ipv6_store_devconf(struct ipv6_devconf *cnf,
 	array[DEVCONF_AUTOCONF] = cnf->autoconf;
 	array[DEVCONF_DAD_TRANSMITS] = cnf->dad_transmits;
 	array[DEVCONF_RTR_SOLICITS] = cnf->rtr_solicits;
-	array[DEVCONF_RTR_SOLICIT_INTERVAL] = cnf->rtr_solicit_interval;
-	array[DEVCONF_RTR_SOLICIT_DELAY] = cnf->rtr_solicit_delay;
+	array[DEVCONF_RTR_SOLICIT_INTERVAL] =
+		jiffies_to_msecs(cnf->rtr_solicit_interval);
+	array[DEVCONF_RTR_SOLICIT_DELAY] =
+		jiffies_to_msecs(cnf->rtr_solicit_delay);
 	array[DEVCONF_FORCE_MLD_VERSION] = cnf->force_mld_version;
 #ifdef CONFIG_IPV6_PRIVACY
 	array[DEVCONF_USE_TEMPADDR] = cnf->use_tempaddr;
@@ -3813,7 +3815,8 @@ static inline void ipv6_store_devconf(struct ipv6_devconf *cnf,
 	array[DEVCONF_ACCEPT_RA_PINFO] = cnf->accept_ra_pinfo;
 #ifdef CONFIG_IPV6_ROUTER_PREF
 	array[DEVCONF_ACCEPT_RA_RTR_PREF] = cnf->accept_ra_rtr_pref;
-	array[DEVCONF_RTR_PROBE_INTERVAL] = cnf->rtr_probe_interval;
+	array[DEVCONF_RTR_PROBE_INTERVAL] =
+		jiffies_to_msecs(cnf->rtr_probe_interval);
 #ifdef CONFIG_IPV6_ROUTE_INFO
 	array[DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN] = cnf->accept_ra_rt_info_max_plen;
 #endif

From 2811036a19624168ff9342bb85421dbbb1d2ac0d Mon Sep 17 00:00:00 2001
From: Youquan Song <youquan.song@linux.intel.com>
Date: Thu, 18 Nov 2010 18:28:20 -0500
Subject: [PATCH 0773/1066] Fix build failure at cx25821-video driver

Kernel build fail for cx25821-video has depends on smp_lock.h header
file, but the dependency is removed in recent commit 451a3c24b013.

Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/staging/cx25821/cx25821.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/cx25821/cx25821.h b/drivers/staging/cx25821/cx25821.h
index acfd0176a184..c94000125782 100644
--- a/drivers/staging/cx25821/cx25821.h
+++ b/drivers/staging/cx25821/cx25821.h
@@ -31,6 +31,7 @@
 #include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/kdev_t.h>
+#include <linux/smp_lock.h>
 
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>

From 18a31e1e282f9ed563b131526a88162ccbe04ee3 Mon Sep 17 00:00:00 2001
From: Thomas Graf <tgraf@infradead.org>
Date: Wed, 17 Nov 2010 04:12:02 +0000
Subject: [PATCH 0774/1066] ipv6: Expose reachable and retrans timer values as
 msecs

Expose reachable and retrans timer values in msecs instead of jiffies.
Both timer values are already exposed as msecs in the neighbour table
netlink interface.

The creation timestamp format with increased precision is kept but
cleaned up.

Signed-off-by: Thomas Graf <tgraf@infradead.org>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/addrconf.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 52b7df74e4c7..2fc35b32df9e 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -98,7 +98,11 @@
 #endif
 
 #define	INFINITY_LIFE_TIME	0xFFFFFFFF
-#define TIME_DELTA(a, b) ((unsigned long)((long)(a) - (long)(b)))
+
+static inline u32 cstamp_delta(unsigned long cstamp)
+{
+	return (cstamp - INITIAL_JIFFIES) * 100UL / HZ;
+}
 
 #define ADDRCONF_TIMER_FUZZ_MINUS	(HZ > 50 ? HZ/50 : 1)
 #define ADDRCONF_TIMER_FUZZ		(HZ / 4)
@@ -3444,10 +3448,8 @@ static int put_cacheinfo(struct sk_buff *skb, unsigned long cstamp,
 {
 	struct ifa_cacheinfo ci;
 
-	ci.cstamp = (u32)(TIME_DELTA(cstamp, INITIAL_JIFFIES) / HZ * 100
-			+ TIME_DELTA(cstamp, INITIAL_JIFFIES) % HZ * 100 / HZ);
-	ci.tstamp = (u32)(TIME_DELTA(tstamp, INITIAL_JIFFIES) / HZ * 100
-			+ TIME_DELTA(tstamp, INITIAL_JIFFIES) % HZ * 100 / HZ);
+	ci.cstamp = cstamp_delta(cstamp);
+	ci.tstamp = cstamp_delta(tstamp);
 	ci.ifa_prefered = preferred;
 	ci.ifa_valid = valid;
 
@@ -3932,10 +3934,9 @@ static int inet6_fill_ifinfo(struct sk_buff *skb, struct inet6_dev *idev,
 	NLA_PUT_U32(skb, IFLA_INET6_FLAGS, idev->if_flags);
 
 	ci.max_reasm_len = IPV6_MAXPLEN;
-	ci.tstamp = (__u32)(TIME_DELTA(idev->tstamp, INITIAL_JIFFIES) / HZ * 100
-		    + TIME_DELTA(idev->tstamp, INITIAL_JIFFIES) % HZ * 100 / HZ);
-	ci.reachable_time = idev->nd_parms->reachable_time;
-	ci.retrans_time = idev->nd_parms->retrans_time;
+	ci.tstamp = cstamp_delta(idev->tstamp);
+	ci.reachable_time = jiffies_to_msecs(idev->nd_parms->reachable_time);
+	ci.retrans_time = jiffies_to_msecs(idev->nd_parms->retrans_time);
 	NLA_PUT(skb, IFLA_INET6_CACHEINFO, sizeof(ci), &ci);
 
 	nla = nla_reserve(skb, IFLA_INET6_CONF, DEVCONF_MAX * sizeof(s32));

From 925e277f5221defdc53cbef1ac3ed1803fa32357 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Tue, 16 Nov 2010 09:40:02 +0000
Subject: [PATCH 0775/1066] net: irda: irttp: sync error paths of data- and
 udata-requests

irttp_data_request() returns meaningful errorcodes, while irttp_udata_request()
just returns -1 in similar situations. Sync the two and the loglevels of the
accompanying output.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/irda/irttp.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/net/irda/irttp.c b/net/irda/irttp.c
index 6cfaeaf2a370..f6054f9ccbe3 100644
--- a/net/irda/irttp.c
+++ b/net/irda/irttp.c
@@ -550,7 +550,7 @@ EXPORT_SYMBOL(irttp_close_tsap);
  */
 int irttp_udata_request(struct tsap_cb *self, struct sk_buff *skb)
 {
-	int ret = -1;
+	int ret;
 
 	IRDA_ASSERT(self != NULL, return -1;);
 	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
@@ -566,13 +566,14 @@ int irttp_udata_request(struct tsap_cb *self, struct sk_buff *skb)
 
 	/* Check that nothing bad happens */
 	if (!self->connected) {
-		IRDA_DEBUG(1, "%s(), Not connected\n", __func__);
+		IRDA_WARNING("%s(), Not connected\n", __func__);
+		ret = -ENOTCONN;
 		goto err;
 	}
 
 	if (skb->len > self->max_seg_size) {
-		IRDA_DEBUG(1, "%s(), UData is too large for IrLAP!\n",
-			   __func__);
+		IRDA_ERROR("%s(), UData is too large for IrLAP!\n", __func__);
+		ret = -EMSGSIZE;
 		goto err;
 	}
 

From dba4490d22a496f9b7c21919cf3effbed5851213 Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Thu, 18 Nov 2010 08:20:57 +0000
Subject: [PATCH 0776/1066] netfilter: fix IP_VS dependencies

When NF_CONNTRACK is enabled, IP_VS uses conntrack symbols.
Therefore IP_VS can't be linked statically when conntrack
is built modular.

Reported-by: Justin P. Mattock <justinmattock@gmail.com>
Tested-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/netfilter/ipvs/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/netfilter/ipvs/Kconfig b/net/netfilter/ipvs/Kconfig
index a22dac227055..70bd1d0774c6 100644
--- a/net/netfilter/ipvs/Kconfig
+++ b/net/netfilter/ipvs/Kconfig
@@ -4,6 +4,7 @@
 menuconfig IP_VS
 	tristate "IP virtual server support"
 	depends on NET && INET && NETFILTER
+	depends on (NF_CONNTRACK || NF_CONNTRACK=n)
 	---help---
 	  IP Virtual Server support will let you build a high-performance
 	  virtual server based on cluster of two or more real servers. This

From 2b35f4d9cab365d37c7b34ce51e1c1144c312d05 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 18 Nov 2010 12:27:31 -0800
Subject: [PATCH 0777/1066] kernel-doc: escape xml for structs

scripts/kernel-doc was leaving unescaped '<', '>', and '&' in
generated xml output for structs.  This causes xml parser errors.
Convert these characters to "&lt;", "&gt;", and "&amp;" as needed
to prevent errors.

Most of the conversion was already done; complete it just before
output.

Documentation/DocBook/device-drivers.xml:41883: parser error : StartTag: invalid element name
#define INPUT_KEYMAP_BY_INDEX	(1 << 0)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/kernel-doc | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index cdb6dc1f6458..39580a5dc5df 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -5,7 +5,7 @@ use strict;
 ## Copyright (c) 1998 Michael Zucchi, All Rights Reserved        ##
 ## Copyright (C) 2000, 1  Tim Waugh <twaugh@redhat.com>          ##
 ## Copyright (C) 2001  Simon Huggins                             ##
-## Copyright (C) 2005-2009  Randy Dunlap                         ##
+## Copyright (C) 2005-2010  Randy Dunlap                         ##
 ## 								 ##
 ## #define enhancements by Armin Kuster <akuster@mvista.com>	 ##
 ## Copyright (c) 2000 MontaVista Software, Inc.			 ##
@@ -453,7 +453,7 @@ sub output_highlight {
     if ($output_mode eq "html" || $output_mode eq "xml") {
 	$contents = local_unescape($contents);
 	# convert data read & converted thru xml_escape() into &xyz; format:
-	$contents =~ s/\\\\\\/&/g;
+	$contents =~ s/\\\\\\/\&/g;
     }
 #   print STDERR "contents b4:$contents\n";
     eval $dohighlight;
@@ -770,7 +770,11 @@ sub output_struct_xml(%) {
     print $args{'type'} . " " . $args{'struct'} . " {\n";
     foreach $parameter (@{$args{'parameterlist'}}) {
 	if ($parameter =~ /^#/) {
-	    print "$parameter\n";
+	    my $prm = $parameter;
+	    # convert data read & converted thru xml_escape() into &xyz; format:
+	    # This allows us to have #define macros interspersed in a struct.
+	    $prm =~ s/\\\\\\/\&/g;
+	    print "$prm\n";
 	    next;
 	}
 
@@ -1701,6 +1705,8 @@ sub push_parameter($$$) {
 	}
 	}
 
+	$param = xml_escape($param);
+
 	# strip spaces from $param so that it is one continous string
 	# on @parameterlist;
 	# this fixes a problem where check_sections() cannot find

From 09c9feb94672bdb3ca6d424a292ffc26eff8ca0b Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Thu, 18 Nov 2010 12:27:32 -0800
Subject: [PATCH 0778/1066] Documentation: make configfs example code simpler,
 clearer

If "p" is NULL then it will cause an oops when we pass it to
simple_strtoul().  In this case "p" can not be NULL so I removed the
check.  I also changed the check a little to make it more explicit that
we are testing whether p points to the NUL char.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/filesystems/configfs/configfs_example_explicit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/filesystems/configfs/configfs_example_explicit.c b/Documentation/filesystems/configfs/configfs_example_explicit.c
index d428cc9f07f3..fd53869f5633 100644
--- a/Documentation/filesystems/configfs/configfs_example_explicit.c
+++ b/Documentation/filesystems/configfs/configfs_example_explicit.c
@@ -89,7 +89,7 @@ static ssize_t childless_storeme_write(struct childless *childless,
 	char *p = (char *) page;
 
 	tmp = simple_strtoul(p, &p, 10);
-	if (!p || (*p && (*p != '\n')))
+	if ((*p != '\0') && (*p != '\n'))
 		return -EINVAL;
 
 	if (tmp > INT_MAX)

From ebde7b062cd9e2ea968c93f23f73dd28c0a192d1 Mon Sep 17 00:00:00 2001
From: Bernhard Walle <walle@corscience.de>
Date: Thu, 18 Nov 2010 12:27:33 -0800
Subject: [PATCH 0779/1066] Documentation/gpio.txt: explain poll/select usage

Add a bit more information how to use poll(2) on GPIO value files
correctly. For me it was not clear that I need to poll(2) for
POLLPRI|POLLERR or select(2) for exceptfds.

Signed-off-by: Bernhard Walle <walle@corscience.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/gpio.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index 9633da01ff46..792faa3c06cf 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -617,6 +617,16 @@ and have the following read/write attributes:
 		is configured as an output, this value may be written;
 		any nonzero value is treated as high.
 
+		If the pin can be configured as interrupt-generating interrupt
+		and if it has been configured to generate interrupts (see the
+		description of "edge"), you can poll(2) on that file and
+		poll(2) will return whenever the interrupt was triggered. If
+		you use poll(2), set the events POLLPRI and POLLERR. If you
+		use select(2), set the file descriptor in exceptfds. After
+		poll(2) returns, either lseek(2) to the beginning of the sysfs
+		file and read the new value or close the file and re-open it
+		to read the value.
+
 	"edge" ... reads as either "none", "rising", "falling", or
 		"both". Write these strings to select the signal edge(s)
 		that will make poll(2) on the "value" file return.

From f99e0e98f95bbe8833bd96c314b71ef859851bc5 Mon Sep 17 00:00:00 2001
From: "Hans J. Koch" <hjk@hansjkoch.de>
Date: Thu, 18 Nov 2010 12:27:34 -0800
Subject: [PATCH 0780/1066] Documentation: change email address for Hans Koch

My old mail address doesn't exist anymore. This changes all occurrences
to my new address.

Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/DocBook/uio-howto.tmpl | 6 +++---
 Documentation/hwmon/lm93             | 2 +-
 Documentation/hwmon/max6650          | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
index 4d4ce0e61e42..b4665b9c40b0 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -16,7 +16,7 @@
 	</orgname>
 
 	<address>
-	   <email>hjk@linutronix.de</email>
+	   <email>hjk@hansjkoch.de</email>
 	</address>
     </affiliation>
 </author>
@@ -114,7 +114,7 @@ GPL version 2.
 
 <para>If you know of any translations for this document, or you are
 interested in translating it, please email me
-<email>hjk@linutronix.de</email>.
+<email>hjk@hansjkoch.de</email>.
 </para>
 </sect1>
 
@@ -171,7 +171,7 @@ interested in translating it, please email me
 <title>Feedback</title>
 	<para>Find something wrong with this document? (Or perhaps something
 	right?) I would love to hear from you. Please email me at
-	<email>hjk@linutronix.de</email>.</para>
+	<email>hjk@hansjkoch.de</email>.</para>
 </sect1>
 </chapter>
 
diff --git a/Documentation/hwmon/lm93 b/Documentation/hwmon/lm93
index ac711f357faf..7a10616d0b44 100644
--- a/Documentation/hwmon/lm93
+++ b/Documentation/hwmon/lm93
@@ -11,7 +11,7 @@ Authors:
 	Mark M. Hoffman <mhoffman@lightlink.com>
 	Ported to 2.6 by Eric J. Bowersox <ericb@aspsys.com>
 	Adapted to 2.6.20 by Carsten Emde <ce@osadl.org>
-	Modified for mainline integration by Hans J. Koch <hjk@linutronix.de>
+	Modified for mainline integration by Hans J. Koch <hjk@hansjkoch.de>
 
 Module Parameters
 -----------------
diff --git a/Documentation/hwmon/max6650 b/Documentation/hwmon/max6650
index 8be7beb9e3e8..c565650fcfc6 100644
--- a/Documentation/hwmon/max6650
+++ b/Documentation/hwmon/max6650
@@ -8,7 +8,7 @@ Supported chips:
     Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf
 
 Authors:
-    Hans J. Koch <hjk@linutronix.de>
+    Hans J. Koch <hjk@hansjkoch.de>
     John Morris <john.morris@spirentcom.com>
     Claus Gindhart <claus.gindhart@kontron.com>
 

From e4fabad30eaba5bb78cd8d47885f1b705a0918a0 Mon Sep 17 00:00:00 2001
From: Andres Salomon <dilinger@queued.net>
Date: Thu, 18 Nov 2010 12:27:35 -0800
Subject: [PATCH 0781/1066] Documentation/development-process: use -next trees
 instead of staging

This is confusing, as we have "staging" trees for drivers/staging.  Call
them -next trees.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/development-process/2.Process | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/development-process/2.Process b/Documentation/development-process/2.Process
index 97726eba6102..ae8127c1a780 100644
--- a/Documentation/development-process/2.Process
+++ b/Documentation/development-process/2.Process
@@ -154,7 +154,7 @@ The stages that a patch goes through are, generally:
    inclusion, it should be accepted by a relevant subsystem maintainer -
    though this acceptance is not a guarantee that the patch will make it
    all the way to the mainline.  The patch will show up in the maintainer's
-   subsystem tree and into the staging trees (described below).  When the
+   subsystem tree and into the -next trees (described below).  When the
    process works, this step leads to more extensive review of the patch and
    the discovery of any problems resulting from the integration of this
    patch with work being done by others.
@@ -236,7 +236,7 @@ finding the right maintainer.  Sending patches directly to Linus is not
 normally the right way to go.
 
 
-2.4: STAGING TREES
+2.4: NEXT TREES
 
 The chain of subsystem trees guides the flow of patches into the kernel,
 but it also raises an interesting question: what if somebody wants to look
@@ -250,7 +250,7 @@ changes land in the mainline kernel.  One could pull changes from all of
 the interesting subsystem trees, but that would be a big and error-prone
 job.
 
-The answer comes in the form of staging trees, where subsystem trees are
+The answer comes in the form of -next trees, where subsystem trees are
 collected for testing and review.  The older of these trees, maintained by
 Andrew Morton, is called "-mm" (for memory management, which is how it got
 started).  The -mm tree integrates patches from a long list of subsystem
@@ -275,7 +275,7 @@ directory at:
 Use of the MMOTM tree is likely to be a frustrating experience, though;
 there is a definite chance that it will not even compile.
 
-The other staging tree, started more recently, is linux-next, maintained by
+The other -next tree, started more recently, is linux-next, maintained by
 Stephen Rothwell.  The linux-next tree is, by design, a snapshot of what
 the mainline is expected to look like after the next merge window closes.
 Linux-next trees are announced on the linux-kernel and linux-next mailing

From f830673f6aa28741ff6993deade587c8550c1dd3 Mon Sep 17 00:00:00 2001
From: Andres Salomon <dilinger@queued.net>
Date: Thu, 18 Nov 2010 12:27:36 -0800
Subject: [PATCH 0782/1066] Documentation/development-process: more staging
 info

Document things that I would've liked to have known when submitting a driver
to gregkh for staging.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/development-process/2.Process | 23 ++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/Documentation/development-process/2.Process b/Documentation/development-process/2.Process
index ae8127c1a780..911a45186340 100644
--- a/Documentation/development-process/2.Process
+++ b/Documentation/development-process/2.Process
@@ -303,12 +303,25 @@ volatility of linux-next tends to make it a difficult development target.
 See http://lwn.net/Articles/289013/ for more information on this topic, and
 stay tuned; much is still in flux where linux-next is involved.
 
-Besides the mmotm and linux-next trees, the kernel source tree now contains
-the drivers/staging/ directory and many sub-directories for drivers or
-filesystems that are on their way to being added to the kernel tree
-proper, but they remain in drivers/staging/ while they still need more
-work.
+2.4.1: STAGING TREES
 
+The kernel source tree now contains the drivers/staging/ directory, where
+many sub-directories for drivers or filesystems that are on their way to
+being added to the kernel tree live.  They remain in drivers/staging while
+they still need more work; once complete, they can be moved into the
+kernel proper.  This is a way to keep track of drivers that aren't
+up to Linux kernel coding or quality standards, but people may want to use
+them and track development.
+
+Greg Kroah-Hartman currently (as of 2.6.36) maintains the staging tree.
+Drivers that still need work are sent to him, with each driver having
+its own subdirectory in drivers/staging/.  Along with the driver source
+files, a TODO file should be present in the directory as well.  The TODO
+file lists the pending work that the driver needs for acceptance into
+the kernel proper, as well as a list of people that should be Cc'd for any
+patches to the driver.  Staging drivers that don't currently build should
+have their config entries depend upon CONFIG_BROKEN.  Once they can
+be successfully built without outside patches, CONFIG_BROKEN can be removed.
 
 2.5: TOOLS
 

From 5d3efe0735350ca9329259f34ac6a84b36dd83f2 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 18 Nov 2010 12:27:37 -0800
Subject: [PATCH 0783/1066] MAINTAINERS: update documentation entries

Update kernel-doc and Documentation maintainers info.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 8e6548dbd5db..f51ec0a22ff9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2008,6 +2008,7 @@ F:	drivers/hwmon/dme1737.c
 DOCBOOK FOR DOCUMENTATION
 M:	Randy Dunlap <rdunlap@xenotime.net>
 S:	Maintained
+F:	scripts/kernel-doc
 
 DOCKING STATION DRIVER
 M:	Shaohua Li <shaohua.li@intel.com>
@@ -2018,6 +2019,7 @@ F:	drivers/acpi/dock.c
 DOCUMENTATION
 M:	Randy Dunlap <rdunlap@xenotime.net>
 L:	linux-doc@vger.kernel.org
+T:	quilt oss.oracle.com/~rdunlap/kernel-doc-patches/current/
 S:	Maintained
 F:	Documentation/
 

From be66305718bee9927e6acc6b75618ce3cd745718 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Thu, 18 Nov 2010 17:18:08 -0500
Subject: [PATCH 0784/1066] drm/radeon/kms: fix i2c pad masks on rs4xx

These got lost in the last i2c cleanup.  Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=23222

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_combios.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 7b7ea269549c..3bddea5b5295 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -571,6 +571,7 @@ static struct radeon_i2c_bus_rec combios_setup_i2c_bus(struct radeon_device *rde
 	}
 
 	if (clk_mask && data_mask) {
+		/* system specific masks */
 		i2c.mask_clk_mask = clk_mask;
 		i2c.mask_data_mask = data_mask;
 		i2c.a_clk_mask = clk_mask;
@@ -579,7 +580,19 @@ static struct radeon_i2c_bus_rec combios_setup_i2c_bus(struct radeon_device *rde
 		i2c.en_data_mask = data_mask;
 		i2c.y_clk_mask = clk_mask;
 		i2c.y_data_mask = data_mask;
+	} else if ((ddc_line == RADEON_GPIOPAD_MASK) ||
+		   (ddc_line == RADEON_MDGPIO_MASK)) {
+		/* default gpiopad masks */
+		i2c.mask_clk_mask = (0x20 << 8);
+		i2c.mask_data_mask = 0x80;
+		i2c.a_clk_mask = (0x20 << 8);
+		i2c.a_data_mask = 0x80;
+		i2c.en_clk_mask = (0x20 << 8);
+		i2c.en_data_mask = 0x80;
+		i2c.y_clk_mask = (0x20 << 8);
+		i2c.y_data_mask = 0x80;
 	} else {
+		/* default masks for ddc pads */
 		i2c.mask_clk_mask = RADEON_GPIO_EN_1;
 		i2c.mask_data_mask = RADEON_GPIO_EN_0;
 		i2c.a_clk_mask = RADEON_GPIO_A_1;

From 164bcb94bc821fcbac752e809b4ac7c6f15d13b5 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Thu, 18 Nov 2010 11:37:18 -0500
Subject: [PATCH 0785/1066] drm/radeon/kms: i2c s/sprintf/snprintf/g for safety

As per advice from Jean Delvare.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_i2c.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c
index d263bd1a0d80..ded2a45bc95c 100644
--- a/drivers/gpu/drm/radeon/radeon_i2c.c
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -896,7 +896,8 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
 	     ((rdev->family <= CHIP_RS480) ||
 	      ((rdev->family >= CHIP_RV515) && (rdev->family <= CHIP_R580))))) {
 		/* set the radeon hw i2c adapter */
-		sprintf(i2c->adapter.name, "Radeon i2c hw bus %s", name);
+		snprintf(i2c->adapter.name, sizeof(i2c->adapter.name),
+			 "Radeon i2c hw bus %s", name);
 		i2c->adapter.algo = &radeon_i2c_algo;
 		ret = i2c_add_adapter(&i2c->adapter);
 		if (ret) {
@@ -905,7 +906,8 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
 		}
 	} else {
 		/* set the radeon bit adapter */
-		sprintf(i2c->adapter.name, "Radeon i2c bit bus %s", name);
+		snprintf(i2c->adapter.name, sizeof(i2c->adapter.name),
+			 "Radeon i2c bit bus %s", name);
 		i2c->adapter.algo_data = &i2c->algo.bit;
 		i2c->algo.bit.pre_xfer = pre_xfer;
 		i2c->algo.bit.post_xfer = post_xfer;
@@ -946,7 +948,8 @@ struct radeon_i2c_chan *radeon_i2c_create_dp(struct drm_device *dev,
 	i2c->rec = *rec;
 	i2c->adapter.owner = THIS_MODULE;
 	i2c->dev = dev;
-	sprintf(i2c->adapter.name, "Radeon aux bus %s", name);
+	snprintf(i2c->adapter.name, sizeof(i2c->adapter.name),
+		 "Radeon aux bus %s", name);
 	i2c_set_adapdata(&i2c->adapter, i2c);
 	i2c->adapter.algo_data = &i2c->algo.dp;
 	i2c->algo.dp.aux_ch = radeon_dp_i2c_aux_ch;

From 9045d47ea362e6a3727ee3f1b69a1b656976772e Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Thu, 18 Nov 2010 17:14:46 -0800
Subject: [PATCH 0786/1066] Revert "xen/privcmd: create address space to allow
 writable mmaps"

This reverts commit 24a89b5be4cf2b7f1b49b56b6cb4a7b71fccf241.

We should no longer need an address space now that we're correctly
setting VM_PFNMAP on our vmas.

Conflicts:

	drivers/xen/xenfs/super.c

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/xenfs/super.c | 40 ++++-----------------------------------
 1 file changed, 4 insertions(+), 36 deletions(-)

diff --git a/drivers/xen/xenfs/super.c b/drivers/xen/xenfs/super.c
index 990ee42167a1..1aa389719846 100644
--- a/drivers/xen/xenfs/super.c
+++ b/drivers/xen/xenfs/super.c
@@ -12,8 +12,6 @@
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/magic.h>
-#include <linux/mm.h>
-#include <linux/backing-dev.h>
 
 #include <xen/xen.h>
 
@@ -24,28 +22,12 @@
 MODULE_DESCRIPTION("Xen filesystem");
 MODULE_LICENSE("GPL");
 
-static int xenfs_set_page_dirty(struct page *page)
-{
-	return !TestSetPageDirty(page);
-}
-
-static const struct address_space_operations xenfs_aops = {
-	.set_page_dirty = xenfs_set_page_dirty,
-};
-
-static struct backing_dev_info xenfs_backing_dev_info = {
-	.ra_pages	= 0,	/* No readahead */
-	.capabilities	= BDI_CAP_NO_ACCT_AND_WRITEBACK,
-};
-
 static struct inode *xenfs_make_inode(struct super_block *sb, int mode)
 {
 	struct inode *ret = new_inode(sb);
 
 	if (ret) {
 		ret->i_mode = mode;
-		ret->i_mapping->a_ops = &xenfs_aops;
-		ret->i_mapping->backing_dev_info = &xenfs_backing_dev_info;
 		ret->i_uid = ret->i_gid = 0;
 		ret->i_blocks = 0;
 		ret->i_atime = ret->i_mtime = ret->i_ctime = CURRENT_TIME;
@@ -137,25 +119,11 @@ static struct file_system_type xenfs_type = {
 
 static int __init xenfs_init(void)
 {
-	int err;
-	if (!xen_domain()) {
-		printk(KERN_INFO "xenfs: not registering filesystem on non-xen platform\n");
-		return 0;
-	}
+	if (xen_domain())
+		return register_filesystem(&xenfs_type);
 
-	err = register_filesystem(&xenfs_type);
-	if (err) {
-		printk(KERN_ERR "xenfs: Unable to register filesystem!\n");
-		goto out;
-	}
-
-	err = bdi_init(&xenfs_backing_dev_info);
-	if (err)
-		unregister_filesystem(&xenfs_type);
-
- out:
-
-	return err;
+	printk(KERN_INFO "XENFS: not registering filesystem on non-xen platform\n");
+	return 0;
 }
 
 static void __exit xenfs_exit(void)

From bc7fc5e33e1a093e5f9e196595843bb096471586 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Thu, 18 Nov 2010 22:32:17 -0800
Subject: [PATCH 0787/1066] xen/evtchn: the evtchn device is non-seekable

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/evtchn.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
index fec6ba3c08a8..dd8e5e0f1935 100644
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -431,7 +431,7 @@ static int evtchn_open(struct inode *inode, struct file *filp)
 
 	filp->private_data = u;
 
-	return 0;
+	return nonseekable_open(inode, filp);;
 }
 
 static int evtchn_release(struct inode *inode, struct file *filp)
@@ -467,7 +467,7 @@ static const struct file_operations evtchn_fops = {
 	.fasync  = evtchn_fasync,
 	.open    = evtchn_open,
 	.release = evtchn_release,
-	.llseek = noop_llseek,
+	.llseek	 = no_llseek,
 };
 
 static struct miscdevice evtchn_miscdev = {

From f278ea849e15147269190e943937fa82e66078b1 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 19 Nov 2010 16:40:35 +0900
Subject: [PATCH 0788/1066] sh: clkfwk: Build fix for non-legacy CPG changes.

The disabling of the init op for non-legacy clocks neglected to do the
same in the core clock framework, resulting in a build failure. Fix it
up.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/sh/clk/core.c | 3 +++
 drivers/sh/clk/cpg.c  | 2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
index 87743e7d4d42..3f5e387ed564 100644
--- a/drivers/sh/clk/core.c
+++ b/drivers/sh/clk/core.c
@@ -418,8 +418,11 @@ int clk_register(struct clk *clk)
 		list_add(&clk->sibling, &root_clks);
 
 	list_add(&clk->node, &clock_list);
+
+#ifdef CONFIG_SH_CLK_CPG_LEGACY
 	if (clk->ops && clk->ops->init)
 		clk->ops->init(clk);
+#endif
 
 out_unlock:
 	mutex_unlock(&clock_list_sem);
diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
index 359e9a322c7b..6172335ae323 100644
--- a/drivers/sh/clk/cpg.c
+++ b/drivers/sh/clk/cpg.c
@@ -131,7 +131,7 @@ static int sh_clk_div6_enable(struct clk *clk)
 	unsigned long value;
 	int ret;
 
-	ret = sh_clk_div6_set_rate(clk, clk->rate, 0);
+	ret = sh_clk_div6_set_rate(clk, clk->rate);
 	if (ret == 0) {
 		value = __raw_readl(clk->enable_reg);
 		value &= ~0x100; /* clear stop bit to enable clock */

From b5d827b641b192ceb6968c21feb544c744e43108 Mon Sep 17 00:00:00 2001
From: Ian Campbell <ian.campbell@citrix.com>
Date: Mon, 7 Dec 2009 17:10:27 -0800
Subject: [PATCH 0789/1066] xen: make evtchn's name less generic

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/Makefile | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
index eb8a78d77d9d..533a199e7a3f 100644
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -8,9 +8,12 @@ obj-$(CONFIG_BLOCK)		+= biomerge.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= cpu_hotplug.o
 obj-$(CONFIG_XEN_XENCOMM)	+= xencomm.o
 obj-$(CONFIG_XEN_BALLOON)	+= balloon.o
-obj-$(CONFIG_XEN_DEV_EVTCHN)	+= evtchn.o
+obj-$(CONFIG_XEN_DEV_EVTCHN)	+= xen-evtchn.o
 obj-$(CONFIG_XENFS)		+= xenfs/
 obj-$(CONFIG_XEN_SYS_HYPERVISOR)	+= sys-hypervisor.o
 obj-$(CONFIG_XEN_PLATFORM_PCI)	+= platform-pci.o
 obj-$(CONFIG_SWIOTLB_XEN)	+= swiotlb-xen.o
 obj-$(CONFIG_XEN_DOM0)		+= pci.o
+
+xen-evtchn-y			:= evtchn.o
+

From 51311d0a5c69adaec582080ad8d9b174a44dfd7a Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed, 17 Nov 2010 09:10:42 +0000
Subject: [PATCH 0790/1066] drm/i915: Do not hold mutex when faulting in user
 addresses

Linus Torvalds found that it was rather trivial to trigger a system
freeze:

  In fact, with lockdep, I don't even need to do the sysrq-d thing: it
  shows the bug as it happens. It's the X server taking the same lock
  recursively.

  Here's the problem:

    =============================================
    [ INFO: possible recursive locking detected ]
    2.6.37-rc2-00012-gbdbd01a #7
    ---------------------------------------------
    Xorg/2816 is trying to acquire lock:
     (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c626c>] i915_gem_fault+0x50/0x17e

    but task is already holding lock:
     (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a

    other info that might help us debug this:
    2 locks held by Xorg/2816:
     #0:  (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a
     #1:  (&mm->mmap_sem){++++++}, at: [<ffffffff81022d4f>] page_fault+0x156/0x37b

This recursion was introduced by rearranging the locking to avoid the
double locking on the fast path (4f27b5d and fbd5a26d) and the
introduction of the prefault to encourage the fast paths (b5e4f2b). In
order to undo the problem, we rearrange the code to perform the access
validation upfront, attempt to prefault and then fight for control of the
mutex.  the best case scenario where the mutex is uncontended the
prefaulting is not wasted.

Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_gem.c | 63 ++++++++++++++-------------------
 1 file changed, 27 insertions(+), 36 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 781c26c37b38..17b1cba3b5f1 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -547,6 +547,19 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data,
 	struct drm_i915_gem_object *obj_priv;
 	int ret = 0;
 
+	if (args->size == 0)
+		return 0;
+
+	if (!access_ok(VERIFY_WRITE,
+		       (char __user *)(uintptr_t)args->data_ptr,
+		       args->size))
+		return -EFAULT;
+
+	ret = fault_in_pages_writeable((char __user *)(uintptr_t)args->data_ptr,
+				       args->size);
+	if (ret)
+		return -EFAULT;
+
 	ret = i915_mutex_lock_interruptible(dev);
 	if (ret)
 		return ret;
@@ -564,23 +577,6 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data,
 		goto out;
 	}
 
-	if (args->size == 0)
-		goto out;
-
-	if (!access_ok(VERIFY_WRITE,
-		       (char __user *)(uintptr_t)args->data_ptr,
-		       args->size)) {
-		ret = -EFAULT;
-		goto out;
-	}
-
-	ret = fault_in_pages_writeable((char __user *)(uintptr_t)args->data_ptr,
-				       args->size);
-	if (ret) {
-		ret = -EFAULT;
-		goto out;
-	}
-
 	ret = i915_gem_object_get_pages_or_evict(obj);
 	if (ret)
 		goto out;
@@ -981,7 +977,20 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 	struct drm_i915_gem_pwrite *args = data;
 	struct drm_gem_object *obj;
 	struct drm_i915_gem_object *obj_priv;
-	int ret = 0;
+	int ret;
+
+	if (args->size == 0)
+		return 0;
+
+	if (!access_ok(VERIFY_READ,
+		       (char __user *)(uintptr_t)args->data_ptr,
+		       args->size))
+		return -EFAULT;
+
+	ret = fault_in_pages_readable((char __user *)(uintptr_t)args->data_ptr,
+				      args->size);
+	if (ret)
+		return -EFAULT;
 
 	ret = i915_mutex_lock_interruptible(dev);
 	if (ret)
@@ -994,30 +1003,12 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 	}
 	obj_priv = to_intel_bo(obj);
 
-
 	/* Bounds check destination. */
 	if (args->offset > obj->size || args->size > obj->size - args->offset) {
 		ret = -EINVAL;
 		goto out;
 	}
 
-	if (args->size == 0)
-		goto out;
-
-	if (!access_ok(VERIFY_READ,
-		       (char __user *)(uintptr_t)args->data_ptr,
-		       args->size)) {
-		ret = -EFAULT;
-		goto out;
-	}
-
-	ret = fault_in_pages_readable((char __user *)(uintptr_t)args->data_ptr,
-				      args->size);
-	if (ret) {
-		ret = -EFAULT;
-		goto out;
-	}
-
 	/* We can only do the GTT pwrite on untiled buffers, as otherwise
 	 * it would end up going through the fenced access, and we'll get
 	 * different detiling behavior between reading and writing.

From c9a1c4cded955176479a28556f546d3d015aee91 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue, 16 Nov 2010 10:58:37 +0000
Subject: [PATCH 0791/1066] drm/i915/crt: Introduce struct intel_crt

We will use this structure in future patches to store CRT specific
information on the encoder.

Split out and tweaked from a patch by Keith Packard.

Signed-off-by: Keith Packard <keithp@kithp.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_crt.c | 64 ++++++++++++++++++--------------
 1 file changed, 37 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index c55c77043357..e38bc6769180 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -34,6 +34,16 @@
 #include "i915_drm.h"
 #include "i915_drv.h"
 
+struct intel_crt {
+	struct intel_encoder base;
+};
+
+static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
+{
+	return container_of(intel_attached_encoder(connector),
+			    struct intel_crt, base);
+}
+
 static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct drm_device *dev = encoder->dev;
@@ -277,13 +287,12 @@ static bool intel_crt_ddc_probe(struct drm_i915_private *dev_priv, int ddc_bus)
 	return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 1) == 1;
 }
 
-static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
+static bool intel_crt_detect_ddc(struct intel_crt *crt)
 {
-	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
-	struct drm_i915_private *dev_priv = encoder->dev->dev_private;
+	struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
 
 	/* CRT should always be at 0, but check anyway */
-	if (intel_encoder->type != INTEL_OUTPUT_ANALOG)
+	if (crt->base.type != INTEL_OUTPUT_ANALOG)
 		return false;
 
 	if (intel_crt_ddc_probe(dev_priv, dev_priv->crt_ddc_pin)) {
@@ -291,7 +300,7 @@ static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
 		return true;
 	}
 
-	if (intel_ddc_probe(intel_encoder, dev_priv->crt_ddc_pin)) {
+	if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
 		DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
 		return true;
 	}
@@ -300,9 +309,9 @@ static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
 }
 
 static enum drm_connector_status
-intel_crt_load_detect(struct drm_crtc *crtc, struct intel_encoder *intel_encoder)
+intel_crt_load_detect(struct drm_crtc *crtc, struct intel_crt *crt)
 {
-	struct drm_encoder *encoder = &intel_encoder->base;
+	struct drm_encoder *encoder = &crt->base.base;
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
@@ -434,7 +443,7 @@ static enum drm_connector_status
 intel_crt_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_device *dev = connector->dev;
-	struct intel_encoder *encoder = intel_attached_encoder(connector);
+	struct intel_crt *crt = intel_attached_crt(connector);
 	struct drm_crtc *crtc;
 	int dpms_mode;
 	enum drm_connector_status status;
@@ -447,24 +456,25 @@ intel_crt_detect(struct drm_connector *connector, bool force)
 			return connector_status_disconnected;
 	}
 
-	if (intel_crt_detect_ddc(&encoder->base))
+	if (intel_crt_detect_ddc(crt))
 		return connector_status_connected;
 
 	if (!force)
 		return connector->status;
 
 	/* for pre-945g platforms use load detect */
-	if (encoder->base.crtc && encoder->base.crtc->enabled) {
-		status = intel_crt_load_detect(encoder->base.crtc, encoder);
+	crtc = crt->base.base.crtc;
+	if (crtc && crtc->enabled) {
+		status = intel_crt_load_detect(crtc, crt);
 	} else {
-		crtc = intel_get_load_detect_pipe(encoder, connector,
+		crtc = intel_get_load_detect_pipe(&crt->base, connector,
 						  NULL, &dpms_mode);
 		if (crtc) {
-			if (intel_crt_detect_ddc(&encoder->base))
+			if (intel_crt_detect_ddc(crt))
 				status = connector_status_connected;
 			else
-				status = intel_crt_load_detect(crtc, encoder);
-			intel_release_load_detect_pipe(encoder,
+				status = intel_crt_load_detect(crtc, crt);
+			intel_release_load_detect_pipe(&crt->base,
 						       connector, dpms_mode);
 		} else
 			status = connector_status_unknown;
@@ -536,17 +546,17 @@ static const struct drm_encoder_funcs intel_crt_enc_funcs = {
 void intel_crt_init(struct drm_device *dev)
 {
 	struct drm_connector *connector;
-	struct intel_encoder *intel_encoder;
+	struct intel_crt *crt;
 	struct intel_connector *intel_connector;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	intel_encoder = kzalloc(sizeof(struct intel_encoder), GFP_KERNEL);
-	if (!intel_encoder)
+	crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
+	if (!crt)
 		return;
 
 	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
 	if (!intel_connector) {
-		kfree(intel_encoder);
+		kfree(crt);
 		return;
 	}
 
@@ -554,20 +564,20 @@ void intel_crt_init(struct drm_device *dev)
 	drm_connector_init(dev, &intel_connector->base,
 			   &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
 
-	drm_encoder_init(dev, &intel_encoder->base, &intel_crt_enc_funcs,
+	drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
 			 DRM_MODE_ENCODER_DAC);
 
-	intel_connector_attach_encoder(intel_connector, intel_encoder);
+	intel_connector_attach_encoder(intel_connector, &crt->base);
 
-	intel_encoder->type = INTEL_OUTPUT_ANALOG;
-	intel_encoder->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
-				   (1 << INTEL_ANALOG_CLONE_BIT) |
-				   (1 << INTEL_SDVO_LVDS_CLONE_BIT);
-	intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
+	crt->base.type = INTEL_OUTPUT_ANALOG;
+	crt->base.clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT |
+				1 << INTEL_ANALOG_CLONE_BIT |
+				1 << INTEL_SDVO_LVDS_CLONE_BIT);
+	crt->base.crtc_mask = (1 << 0) | (1 << 1);
 	connector->interlace_allowed = 1;
 	connector->doublescan_allowed = 0;
 
-	drm_encoder_helper_add(&intel_encoder->base, &intel_crt_helper_funcs);
+	drm_encoder_helper_add(&crt->base.base, &intel_crt_helper_funcs);
 	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 
 	drm_sysfs_connector_add(connector);

From e7dbb2f2f8ac843ab5e4d6a8e9a71d16089d324b Mon Sep 17 00:00:00 2001
From: Keith Packard <keithp@keithp.com>
Date: Tue, 16 Nov 2010 16:03:53 +0800
Subject: [PATCH 0792/1066] drm/i915: Take advantage of auto-polling CRT
 hotplug detection on PCH hardware

Both IBX and CPT have an automatic hotplug detection mode which appears to work reliably enough
that we can dispense with the manual force hotplug trigger stuff. This means that
hotplug detection is as simple as reading the current hotplug register values.

The first time the hotplug detection is activated, the code synchronously waits for a hotplug
sequence in case the hardware hasn't bothered to do a detection cycle since being initialized.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_crt.c | 85 +++++++++++++++++++-------------
 1 file changed, 52 insertions(+), 33 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index e38bc6769180..8df574316063 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -34,8 +34,17 @@
 #include "i915_drm.h"
 #include "i915_drv.h"
 
+/* Here's the desired hotplug mode */
+#define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 |		\
+			   ADPA_CRT_HOTPLUG_WARMUP_10MS |		\
+			   ADPA_CRT_HOTPLUG_SAMPLE_4S |			\
+			   ADPA_CRT_HOTPLUG_VOLTAGE_50 |		\
+			   ADPA_CRT_HOTPLUG_VOLREF_325MV |		\
+			   ADPA_CRT_HOTPLUG_ENABLE)
+
 struct intel_crt {
 	struct intel_encoder base;
+	bool force_hotplug_required;
 };
 
 static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
@@ -139,7 +148,7 @@ static void intel_crt_mode_set(struct drm_encoder *encoder,
 			   dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
 	}
 
-	adpa = 0;
+	adpa = ADPA_HOTPLUG_BITS;
 	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 		adpa |= ADPA_HSYNC_ACTIVE_HIGH;
 	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
@@ -167,53 +176,44 @@ static void intel_crt_mode_set(struct drm_encoder *encoder,
 static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
+	struct intel_crt *crt = intel_attached_crt(connector);
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 adpa, temp;
+	u32 adpa;
 	bool ret;
-	bool turn_off_dac = false;
 
-	temp = adpa = I915_READ(PCH_ADPA);
+	/* The first time through, trigger an explicit detection cycle */
+	if (crt->force_hotplug_required) {
+		bool turn_off_dac = HAS_PCH_SPLIT(dev);
+		u32 save_adpa;
 
-	if (HAS_PCH_SPLIT(dev))
-		turn_off_dac = true;
+		crt->force_hotplug_required = 0;
 
-	adpa &= ~ADPA_CRT_HOTPLUG_MASK;
-	if (turn_off_dac)
-		adpa &= ~ADPA_DAC_ENABLE;
+		save_adpa = adpa = I915_READ(PCH_ADPA);
+		DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
 
-	/* disable HPD first */
-	I915_WRITE(PCH_ADPA, adpa);
-	(void)I915_READ(PCH_ADPA);
+		adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
+		if (turn_off_dac)
+			adpa &= ~ADPA_DAC_ENABLE;
 
-	adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 |
-			ADPA_CRT_HOTPLUG_WARMUP_10MS |
-			ADPA_CRT_HOTPLUG_SAMPLE_4S |
-			ADPA_CRT_HOTPLUG_VOLTAGE_50 | /* default */
-			ADPA_CRT_HOTPLUG_VOLREF_325MV |
-			ADPA_CRT_HOTPLUG_ENABLE |
-			ADPA_CRT_HOTPLUG_FORCE_TRIGGER);
+		I915_WRITE(PCH_ADPA, adpa);
 
-	DRM_DEBUG_KMS("pch crt adpa 0x%x", adpa);
-	I915_WRITE(PCH_ADPA, adpa);
+		if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
+			     1000))
+			DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
 
-	if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
-		     1000))
-		DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
-
-	if (turn_off_dac) {
-		/* Make sure hotplug is enabled */
-		I915_WRITE(PCH_ADPA, temp | ADPA_CRT_HOTPLUG_ENABLE);
-		(void)I915_READ(PCH_ADPA);
+		if (turn_off_dac) {
+			I915_WRITE(PCH_ADPA, save_adpa);
+			POSTING_READ(PCH_ADPA);
+		}
 	}
 
 	/* Check the status to see if both blue and green are on now */
 	adpa = I915_READ(PCH_ADPA);
-	adpa &= ADPA_CRT_HOTPLUG_MONITOR_MASK;
-	if ((adpa == ADPA_CRT_HOTPLUG_MONITOR_COLOR) ||
-		(adpa == ADPA_CRT_HOTPLUG_MONITOR_MONO))
+	if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
 		ret = true;
 	else
 		ret = false;
+	DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);
 
 	return ret;
 }
@@ -452,8 +452,10 @@ intel_crt_detect(struct drm_connector *connector, bool force)
 		if (intel_crt_detect_hotplug(connector)) {
 			DRM_DEBUG_KMS("CRT detected via hotplug\n");
 			return connector_status_connected;
-		} else
+		} else {
+			DRM_DEBUG_KMS("CRT not detected via hotplug\n");
 			return connector_status_disconnected;
+		}
 	}
 
 	if (intel_crt_detect_ddc(crt))
@@ -587,5 +589,22 @@ void intel_crt_init(struct drm_device *dev)
 	else
 		connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 
+	/*
+	 * Configure the automatic hotplug detection stuff
+	 */
+	crt->force_hotplug_required = 0;
+	if (HAS_PCH_SPLIT(dev)) {
+		u32 adpa;
+
+		adpa = I915_READ(PCH_ADPA);
+		adpa &= ~ADPA_CRT_HOTPLUG_MASK;
+		adpa |= ADPA_HOTPLUG_BITS;
+		I915_WRITE(PCH_ADPA, adpa);
+		POSTING_READ(PCH_ADPA);
+
+		DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
+		crt->force_hotplug_required = 1;
+	}
+
 	dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
 }

From 16c59ef33b389217c29122235e475557bc1412a1 Mon Sep 17 00:00:00 2001
From: Alex Shi <alex.shi@intel.com>
Date: Fri, 19 Nov 2010 09:33:55 +0000
Subject: [PATCH 0793/1066] drm/i915: Disable FBC on Ironlake to save 1W

Frame buffer compression is broken on Ironlake due to buggy hardware.
Currently it is disabled through chicken bits, but it still consumes
over 1W more than if we simply never attempt to enable the FBC code
paths.

Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
---
 drivers/gpu/drm/i915/i915_drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 80745f85902c..f737960712e6 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -150,7 +150,8 @@ static const struct intel_device_info intel_ironlake_d_info = {
 
 static const struct intel_device_info intel_ironlake_m_info = {
 	.gen = 5, .is_mobile = 1,
-	.need_gfx_hws = 1, .has_fbc = 1, .has_rc6 = 1, .has_hotplug = 1,
+	.need_gfx_hws = 1, .has_rc6 = 1, .has_hotplug = 1,
+	.has_fbc = 0, /* disabled due to buggy hardware */
 	.has_bsd_ring = 1,
 };
 

From 2811fe2beb7cb9f34eef4bc9627dcabb401bc05e Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 19 Nov 2010 15:48:06 +0800
Subject: [PATCH 0794/1066] ASoC: uda134x - set reg_cache_default to
 uda134x_reg

After checking the code in 2.6.36,
I found this is missing during multi-component conversion.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/uda134x.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c
index 7540a509a6f5..464f0cfa4c7a 100644
--- a/sound/soc/codecs/uda134x.c
+++ b/sound/soc/codecs/uda134x.c
@@ -597,6 +597,7 @@ static struct snd_soc_codec_driver soc_codec_dev_uda134x = {
 	.resume =       uda134x_soc_resume,
 	.reg_cache_size = sizeof(uda134x_reg),
 	.reg_word_size = sizeof(u8),
+	.reg_cache_default = uda134x_reg,
 	.reg_cache_step = 1,
 	.read = uda134x_read_reg_cache,
 	.write = uda134x_write,

From 14870b457524e745f1a118e17873d104b1a47b70 Mon Sep 17 00:00:00 2001
From: Abhijith Das <adas@redhat.com>
Date: Thu, 18 Nov 2010 11:24:24 -0500
Subject: [PATCH 0795/1066] GFS2: Userland expects quota limit/warn/usage in
 512b blocks

Userland programs using the quotactl() syscall assume limit/warn/usage
block counts in 512b basic blocks which were instead being read/written
in fs blocksize in gfs2. With this patch, gfs2 correctly interacts with
the syscall using 512b blocks.

Signed-off-by: Abhi Das <adas@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
---
 fs/gfs2/quota.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 58a9b9998b42..f606baf9ba72 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -631,6 +631,7 @@ static int gfs2_adjust_quota(struct gfs2_inode *ip, loff_t loc,
 			     struct fs_disk_quota *fdq)
 {
 	struct inode *inode = &ip->i_inode;
+	struct gfs2_sbd *sdp = GFS2_SB(inode);
 	struct address_space *mapping = inode->i_mapping;
 	unsigned long index = loc >> PAGE_CACHE_SHIFT;
 	unsigned offset = loc & (PAGE_CACHE_SIZE - 1);
@@ -658,11 +659,11 @@ static int gfs2_adjust_quota(struct gfs2_inode *ip, loff_t loc,
 	qd->qd_qb.qb_value = qp->qu_value;
 	if (fdq) {
 		if (fdq->d_fieldmask & FS_DQ_BSOFT) {
-			qp->qu_warn = cpu_to_be64(fdq->d_blk_softlimit);
+			qp->qu_warn = cpu_to_be64(fdq->d_blk_softlimit >> sdp->sd_fsb2bb_shift);
 			qd->qd_qb.qb_warn = qp->qu_warn;
 		}
 		if (fdq->d_fieldmask & FS_DQ_BHARD) {
-			qp->qu_limit = cpu_to_be64(fdq->d_blk_hardlimit);
+			qp->qu_limit = cpu_to_be64(fdq->d_blk_hardlimit >> sdp->sd_fsb2bb_shift);
 			qd->qd_qb.qb_limit = qp->qu_limit;
 		}
 	}
@@ -1497,9 +1498,9 @@ static int gfs2_get_dqblk(struct super_block *sb, int type, qid_t id,
 	fdq->d_version = FS_DQUOT_VERSION;
 	fdq->d_flags = (type == QUOTA_USER) ? FS_USER_QUOTA : FS_GROUP_QUOTA;
 	fdq->d_id = id;
-	fdq->d_blk_hardlimit = be64_to_cpu(qlvb->qb_limit);
-	fdq->d_blk_softlimit = be64_to_cpu(qlvb->qb_warn);
-	fdq->d_bcount = be64_to_cpu(qlvb->qb_value);
+	fdq->d_blk_hardlimit = be64_to_cpu(qlvb->qb_limit) << sdp->sd_fsb2bb_shift;
+	fdq->d_blk_softlimit = be64_to_cpu(qlvb->qb_warn) << sdp->sd_fsb2bb_shift;
+	fdq->d_bcount = be64_to_cpu(qlvb->qb_value) << sdp->sd_fsb2bb_shift;
 
 	gfs2_glock_dq_uninit(&q_gh);
 out:
@@ -1566,10 +1567,10 @@ static int gfs2_set_dqblk(struct super_block *sb, int type, qid_t id,
 
 	/* If nothing has changed, this is a no-op */
 	if ((fdq->d_fieldmask & FS_DQ_BSOFT) &&
-	    (fdq->d_blk_softlimit == be64_to_cpu(qd->qd_qb.qb_warn)))
+	    ((fdq->d_blk_softlimit >> sdp->sd_fsb2bb_shift) == be64_to_cpu(qd->qd_qb.qb_warn)))
 		fdq->d_fieldmask ^= FS_DQ_BSOFT;
 	if ((fdq->d_fieldmask & FS_DQ_BHARD) &&
-	    (fdq->d_blk_hardlimit == be64_to_cpu(qd->qd_qb.qb_limit)))
+	    ((fdq->d_blk_hardlimit >> sdp->sd_fsb2bb_shift) == be64_to_cpu(qd->qd_qb.qb_limit)))
 		fdq->d_fieldmask ^= FS_DQ_BHARD;
 	if (fdq->d_fieldmask == 0)
 		goto out_i;

From 1b1d76e2df2a0aa965d6a227db7061d3fff029b1 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Thu, 18 Nov 2010 06:58:04 +0300
Subject: [PATCH 0796/1066] UBI: release locks in check_corruption

Commit 45aafd32996e27 "UBI: tighten the corrupted PEB criteria"
introduced some return paths that didn't release the ubi->buf_mutex

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/scan.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 3c631863bf40..204345be8e62 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -787,16 +787,15 @@ static int check_corruption(struct ubi_device *ubi, struct ubi_vid_hdr *vid_hdr,
 		 * erased, so it became unstable and corrupted, and should be
 		 * erased.
 		 */
-		return 0;
+		err = 0;
+		goto out_unlock;
 	}
 
 	if (err)
-		return err;
+		goto out_unlock;
 
-	if (ubi_check_pattern(ubi->peb_buf1, 0xFF, ubi->leb_size)) {
-		mutex_unlock(&ubi->buf_mutex);
-		return 0;
-	}
+	if (ubi_check_pattern(ubi->peb_buf1, 0xFF, ubi->leb_size))
+		goto out_unlock;
 
 	ubi_err("PEB %d contains corrupted VID header, and the data does not "
 		"contain all 0xFF, this may be a non-UBI PEB or a severe VID "
@@ -806,8 +805,11 @@ static int check_corruption(struct ubi_device *ubi, struct ubi_vid_hdr *vid_hdr,
 		pnum, ubi->leb_start, ubi->leb_size);
 	ubi_dbg_print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
 			       ubi->peb_buf1, ubi->leb_size, 1);
+	err = 1;
+
+out_unlock:
 	mutex_unlock(&ubi->buf_mutex);
-	return 1;
+	return err;
 }
 
 /**

From 5a9ae68a349aa076bc8557ee2fcf865574459282 Mon Sep 17 00:00:00 2001
From: "Darrick J. Wong" <djwong@us.ibm.com>
Date: Fri, 19 Nov 2010 09:56:44 -0500
Subject: [PATCH 0797/1066] ext4: ext4_fill_super shouldn't return 0 on
 corruption

At the start of ext4_fill_super, ret is set to -EINVAL, and any failure path
out of that function returns ret.  However, the generic_check_addressable
clause sets ret = 0 (if it passes), which means that a subsequent failure (e.g.
a group checksum error) returns 0 even though the mount should fail.  This
causes vfs_kern_mount in turn to think that the mount succeeded, leading to an
oops.

A simple fix is to avoid using ret for the generic_check_addressable check,
which was last changed in commit 30ca22c70e3ef0a96ff84de69cd7e8561b416cb2.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/super.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index ef09d1443d1a..14ada8c50c43 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3265,13 +3265,14 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	 * Test whether we have more sectors than will fit in sector_t,
 	 * and whether the max offset is addressable by the page cache.
 	 */
-	ret = generic_check_addressable(sb->s_blocksize_bits,
+	err = generic_check_addressable(sb->s_blocksize_bits,
 					ext4_blocks_count(es));
-	if (ret) {
+	if (err) {
 		ext4_msg(sb, KERN_ERR, "filesystem"
 			 " too large to mount safely on this system");
 		if (sizeof(sector_t) < 8)
 			ext4_msg(sb, KERN_WARNING, "CONFIG_LBDAF not enabled");
+		ret = err;
 		goto failed_mount;
 	}
 

From d9efd2af461abb7b54c49c1b7e654d496dd1d379 Mon Sep 17 00:00:00 2001
From: Sarveshwar Bandi <Sarveshwar.Bandi@emulex.com>
Date: Thu, 18 Nov 2010 23:44:45 +0000
Subject: [PATCH 0798/1066] be2net: Fix to avoid firmware update when interface
 is not open.

Since interrupts are enabled only when open is called on the interface,
Attempting a firmware update operation when interface is down could lead to
partial success or failure of operation. This fix fails the request if
netif_running is false.

Signed-off-by: Sarveshwar Bandi <Sarveshwar.Bandi@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_main.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index c36cd2ffbadc..93354eee2cfd 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -2458,6 +2458,12 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
 	int status, i = 0, num_imgs = 0;
 	const u8 *p;
 
+	if (!netif_running(adapter->netdev)) {
+		dev_err(&adapter->pdev->dev,
+			"Firmware load not allowed (interface is down)\n");
+		return -EPERM;
+	}
+
 	strcpy(fw_file, func);
 
 	status = request_firmware(&fw, fw_file, &adapter->pdev->dev);

From 0302b8622ce696af1cda22fcf207d3793350e896 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 18 Nov 2010 13:02:37 +0000
Subject: [PATCH 0799/1066] net: fix kernel-doc for sk_filter_rcu_release

Fix kernel-doc warning for sk_filter_rcu_release():

Warning(net/core/filter.c:586): missing initial short description on line:
 * 	sk_filter_rcu_release: Release a socket filter by rcu_head

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc:	"David S. Miller" <davem@davemloft.net>
Cc:	netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/filter.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/filter.c b/net/core/filter.c
index 23e9b2a6b4c8..c1ee800bc080 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -589,7 +589,7 @@ int sk_chk_filter(struct sock_filter *filter, int flen)
 EXPORT_SYMBOL(sk_chk_filter);
 
 /**
- * 	sk_filter_rcu_release: Release a socket filter by rcu_head
+ * 	sk_filter_rcu_release - Release a socket filter by rcu_head
  *	@rcu: rcu_head that contains the sk_filter to free
  */
 static void sk_filter_rcu_release(struct rcu_head *rcu)

From b1353e4f40f6179ab26a3bb1b2e1fe29ffe534f5 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 19 Nov 2010 15:29:19 +0100
Subject: [PATCH 0800/1066] sata_via: apply magic FIFO fix to vt6420 too

vt6420 has the same FIFO overflow problem as vt6421 when combined with
certain devices.  This patch applies the magic fix to vt6420 too.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Martin Qvist <q@maq.dk>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_via.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index c21589986c69..8b677bbf2d37 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -538,7 +538,7 @@ static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 	return 0;
 }
 
-static void svia_configure(struct pci_dev *pdev)
+static void svia_configure(struct pci_dev *pdev, int board_id)
 {
 	u8 tmp8;
 
@@ -577,7 +577,7 @@ static void svia_configure(struct pci_dev *pdev)
 	}
 
 	/*
-	 * vt6421 has problems talking to some drives.  The following
+	 * vt6420/1 has problems talking to some drives.  The following
 	 * is the fix from Joseph Chan <JosephChan@via.com.tw>.
 	 *
 	 * When host issues HOLD, device may send up to 20DW of data
@@ -596,8 +596,9 @@ static void svia_configure(struct pci_dev *pdev)
 	 *
 	 * https://bugzilla.kernel.org/show_bug.cgi?id=15173
 	 * http://article.gmane.org/gmane.linux.ide/46352
+	 * http://thread.gmane.org/gmane.linux.kernel/1062139
 	 */
-	if (pdev->device == 0x3249) {
+	if (board_id == vt6420 || board_id == vt6421) {
 		pci_read_config_byte(pdev, 0x52, &tmp8);
 		tmp8 |= 1 << 2;
 		pci_write_config_byte(pdev, 0x52, tmp8);
@@ -652,7 +653,7 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	svia_configure(pdev);
+	svia_configure(pdev, board_id);
 
 	pci_set_master(pdev);
 	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,

From 33e0d57f5d2f079104611be9f3fccc27ef2c6b24 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 19 Nov 2010 11:54:40 -0800
Subject: [PATCH 0801/1066] Revert "kernel: make /proc/kallsyms mode 400 to
 reduce ease of attacking"

This reverts commit 59365d136d205cc20fe666ca7f89b1c5001b0d5a.

It turns out that this can break certain existing user land setups.
Quoth Sarah Sharp:

 "On Wednesday, I updated my branch to commit 460781b from linus' tree,
  and my box would not boot.  klogd segfaulted, which stalled the whole
  system.

  At first I thought it actually hung the box, but it continued booting
  after 5 minutes, and I was able to log in.  It dropped back to the
  text console instead of the graphical bootup display for that period
  of time.  dmesg surprisingly still works.  I've bisected the problem
  down to this commit (commit 59365d136d205cc20fe666ca7f89b1c5001b0d5a)

  The box is running klogd 1.5.5ubuntu3 (from Jaunty).  Yes, I know
  that's old.  I read the bit in the commit about changing the
  permissions of kallsyms after boot, but if I can't boot that doesn't
  help."

So let's just keep the old default, and encourage distributions to do
the "chmod -r /proc/kallsyms" in their bootup scripts.  This is not
worth a kernel option to change default behavior, since it's so easily
done in user space.

Reported-and-bisected-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Marcus Meissner <meissner@suse.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Eugene Teo <eugeneteo@kernel.org>
Cc: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/kallsyms.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c
index a8db2570f99a..6f6d091b5757 100644
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -546,7 +546,7 @@ static const struct file_operations kallsyms_operations = {
 
 static int __init kallsyms_init(void)
 {
-	proc_create("kallsyms", 0400, NULL, &kallsyms_operations);
+	proc_create("kallsyms", 0444, NULL, &kallsyms_operations);
 	return 0;
 }
 device_initcall(kallsyms_init);

From 4d0812c37f2f6cf6fc7ca086b5a5e572cbbe7f6d Mon Sep 17 00:00:00 2001
From: Ohad Ben-Cohen <ohad@wizery.com>
Date: Sun, 14 Nov 2010 12:40:33 +0200
Subject: [PATCH 0802/1066] mmc: sdio: fix nasty oops in mmc_sdio_detect

Power off the card in mmc_sdio_detect __before__ a potential error
handler, which completely removes the card, executes, and only if the
card was successfully powered on beforehand.

While we're at it, use the _sync variant of the runtime PM put API, in
order to ensure that the card is left powered off in case an error
occurred, and the card is going to be removed.

Reproduced and tested on the OLPC XO-1.5.

Reported-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 drivers/mmc/core/sdio.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index c3ad1058cd31..42a949b723b8 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -560,6 +560,19 @@ static void mmc_sdio_detect(struct mmc_host *host)
 
 	mmc_release_host(host);
 
+	/*
+	 * Tell PM core it's OK to power off the card now.
+	 *
+	 * The _sync variant is used in order to ensure that the card
+	 * is left powered off in case an error occurred, and the card
+	 * is going to be removed.
+	 *
+	 * Since there is no specific reason to believe a new user
+	 * is about to show up at this point, the _sync variant is
+	 * desirable anyway.
+	 */
+	pm_runtime_put_sync(&host->card->dev);
+
 out:
 	if (err) {
 		mmc_sdio_remove(host);
@@ -568,9 +581,6 @@ out:
 		mmc_detach_bus(host);
 		mmc_release_host(host);
 	}
-
-	/* Tell PM core that we're done */
-	pm_runtime_put(&host->card->dev);
 }
 
 /*

From ed919b0125b26dcc052e44836f66e7e1f5c49c7e Mon Sep 17 00:00:00 2001
From: Ohad Ben-Cohen <ohad@wizery.com>
Date: Fri, 19 Nov 2010 09:29:09 +0200
Subject: [PATCH 0803/1066] mmc: sdio: fix runtime PM anomalies by introducing
 MMC_CAP_POWER_OFF_CARD

Some board/card/host configurations are not capable of powering off the
card after boot.

To support such configurations, and to allow smoother transition to
runtime PM behavior, MMC_CAP_POWER_OFF_CARD is added, so hosts need to
explicitly indicate whether it's OK to power off their cards after boot.

SDIO core will enable runtime PM for a card only if that cap is set.
As a result, the card will be powered down after boot, and will only
be powered up again when a driver is loaded (and then it's up to the
driver to decide whether power will be kept or not).

This will prevent sdio_bus_probe() failures with setups that do not
support powering off the card.

Reported-and-tested-by: Daniel Drake <dsd@laptop.org>
Reported-and-tested-by: Arnd Hannemann <arnd@arndnet.de>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 drivers/mmc/core/sdio.c     | 37 +++++++++++++++++++++++--------------
 drivers/mmc/core/sdio_bus.c | 33 ++++++++++++++++++++++-----------
 include/linux/mmc/host.h    |  1 +
 3 files changed, 46 insertions(+), 25 deletions(-)

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 42a949b723b8..efef5f94ac42 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -547,9 +547,11 @@ static void mmc_sdio_detect(struct mmc_host *host)
 	BUG_ON(!host->card);
 
 	/* Make sure card is powered before detecting it */
-	err = pm_runtime_get_sync(&host->card->dev);
-	if (err < 0)
-		goto out;
+	if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+		err = pm_runtime_get_sync(&host->card->dev);
+		if (err < 0)
+			goto out;
+	}
 
 	mmc_claim_host(host);
 
@@ -571,7 +573,8 @@ static void mmc_sdio_detect(struct mmc_host *host)
 	 * is about to show up at this point, the _sync variant is
 	 * desirable anyway.
 	 */
-	pm_runtime_put_sync(&host->card->dev);
+	if (host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_sync(&host->card->dev);
 
 out:
 	if (err) {
@@ -728,16 +731,21 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
 	card = host->card;
 
 	/*
-	 * Let runtime PM core know our card is active
+	 * Enable runtime PM only if supported by host+card+board
 	 */
-	err = pm_runtime_set_active(&card->dev);
-	if (err)
-		goto remove;
+	if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+		/*
+		 * Let runtime PM core know our card is active
+		 */
+		err = pm_runtime_set_active(&card->dev);
+		if (err)
+			goto remove;
 
-	/*
-	 * Enable runtime PM for this card
-	 */
-	pm_runtime_enable(&card->dev);
+		/*
+		 * Enable runtime PM for this card
+		 */
+		pm_runtime_enable(&card->dev);
+	}
 
 	/*
 	 * The number of functions on the card is encoded inside
@@ -755,9 +763,10 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
 			goto remove;
 
 		/*
-		 * Enable Runtime PM for this func
+		 * Enable Runtime PM for this func (if supported)
 		 */
-		pm_runtime_enable(&card->sdio_func[i]->dev);
+		if (host->caps & MMC_CAP_POWER_OFF_CARD)
+			pm_runtime_enable(&card->sdio_func[i]->dev);
 	}
 
 	mmc_release_host(host);
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 2716c7ab6bbf..203da443e339 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -17,6 +17,7 @@
 #include <linux/pm_runtime.h>
 
 #include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
 #include <linux/mmc/sdio_func.h>
 
 #include "sdio_cis.h"
@@ -132,9 +133,11 @@ static int sdio_bus_probe(struct device *dev)
 	 * it should call pm_runtime_put_noidle() in its probe routine and
 	 * pm_runtime_get_noresume() in its remove routine.
 	 */
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
-		goto out;
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			goto out;
+	}
 
 	/* Set the default block size so the driver is sure it's something
 	 * sensible. */
@@ -151,7 +154,8 @@ static int sdio_bus_probe(struct device *dev)
 	return 0;
 
 disable_runtimepm:
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 out:
 	return ret;
 }
@@ -160,12 +164,14 @@ static int sdio_bus_remove(struct device *dev)
 {
 	struct sdio_driver *drv = to_sdio_driver(dev->driver);
 	struct sdio_func *func = dev_to_sdio_func(dev);
-	int ret;
+	int ret = 0;
 
 	/* Make sure card is powered before invoking ->remove() */
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
-		goto out;
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			goto out;
+	}
 
 	drv->remove(func);
 
@@ -178,10 +184,12 @@ static int sdio_bus_remove(struct device *dev)
 	}
 
 	/* First, undo the increment made directly above */
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 
 	/* Then undo the runtime PM settings in sdio_bus_probe() */
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 
 out:
 	return ret;
@@ -191,6 +199,8 @@ out:
 
 static int sdio_bus_pm_prepare(struct device *dev)
 {
+	struct sdio_func *func = dev_to_sdio_func(dev);
+
 	/*
 	 * Resume an SDIO device which was suspended at run time at this
 	 * point, in order to allow standard SDIO suspend/resume paths
@@ -212,7 +222,8 @@ static int sdio_bus_pm_prepare(struct device *dev)
 	 * since there is little point in failing system suspend if a
 	 * device can't be resumed.
 	 */
-	pm_runtime_resume(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_resume(dev);
 
 	return 0;
 }
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 6d87f68ce4b6..30f6fad99a58 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -168,6 +168,7 @@ struct mmc_host {
 						/* DDR mode at 1.8V */
 #define MMC_CAP_1_2V_DDR	(1 << 12)	/* can support */
 						/* DDR mode at 1.2V */
+#define MMC_CAP_POWER_OFF_CARD	(1 << 13)	/* Can power off after boot */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 

From 93bb41f4f8b89ac8b4d0a734bc59634cb0a29a89 Mon Sep 17 00:00:00 2001
From: Lukas Czerner <lczerner@redhat.com>
Date: Fri, 19 Nov 2010 21:18:35 -0500
Subject: [PATCH 0804/1066] fs: Do not dispatch FITRIM through separate
 super_operation

There was concern that FITRIM ioctl is not common enough to be included
in core vfs ioctl, as Christoph Hellwig pointed out there's no real point
in dispatching this out to a separate vector instead of just through
->ioctl.

So this commit removes ioctl_fstrim() from vfs ioctl and trim_fs
from super_operation structure.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/super.c    |  1 -
 fs/ioctl.c         | 39 ---------------------------------------
 include/linux/fs.h |  1 -
 3 files changed, 41 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 14ada8c50c43..e32195d6aac3 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1197,7 +1197,6 @@ static const struct super_operations ext4_sops = {
 	.quota_write	= ext4_quota_write,
 #endif
 	.bdev_try_to_free_page = bdev_try_to_free_page,
-	.trim_fs	= ext4_trim_fs
 };
 
 static const struct super_operations ext4_nojournal_sops = {
diff --git a/fs/ioctl.c b/fs/ioctl.c
index e92fdbb3bc3a..f855ea4fc888 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -530,41 +530,6 @@ static int ioctl_fsthaw(struct file *filp)
 	return thaw_super(sb);
 }
 
-static int ioctl_fstrim(struct file *filp, void __user *argp)
-{
-	struct super_block *sb = filp->f_path.dentry->d_inode->i_sb;
-	struct fstrim_range range;
-	int ret = 0;
-
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-
-	/* If filesystem doesn't support trim feature, return. */
-	if (sb->s_op->trim_fs == NULL)
-		return -EOPNOTSUPP;
-
-	/* If a blockdevice-backed filesystem isn't specified, return EINVAL. */
-	if (sb->s_bdev == NULL)
-		return -EINVAL;
-
-	if (argp == NULL) {
-		range.start = 0;
-		range.len = ULLONG_MAX;
-		range.minlen = 0;
-	} else if (copy_from_user(&range, argp, sizeof(range)))
-		return -EFAULT;
-
-	ret = sb->s_op->trim_fs(sb, &range);
-	if (ret < 0)
-		return ret;
-
-	if ((argp != NULL) &&
-	    (copy_to_user(argp, &range, sizeof(range))))
-		return -EFAULT;
-
-	return 0;
-}
-
 /*
  * When you add any new common ioctls to the switches above and below
  * please update compat_sys_ioctl() too.
@@ -615,10 +580,6 @@ int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
 		error = ioctl_fsthaw(filp);
 		break;
 
-	case FITRIM:
-		error = ioctl_fstrim(filp, argp);
-		break;
-
 	case FS_IOC_FIEMAP:
 		return ioctl_fiemap(filp, arg);
 
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 334d68a17108..eedc00b7b1ee 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1612,7 +1612,6 @@ struct super_operations {
 	ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
 #endif
 	int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t);
-	int (*trim_fs) (struct super_block *, struct fstrim_range *);
 };
 
 /*

From e681c047e47c0abe67bf95857f23814372793cb0 Mon Sep 17 00:00:00 2001
From: Lukas Czerner <lczerner@redhat.com>
Date: Fri, 19 Nov 2010 21:47:07 -0500
Subject: [PATCH 0805/1066] ext4: Add EXT4_IOC_TRIM ioctl to handle batched
 discard

Filesystem independent ioctl was rejected as not common enough to be in
core vfs ioctl. Since we still need to access to this functionality this
commit adds ext4 specific ioctl EXT4_IOC_TRIM to dispatch
ext4_trim_fs().

It takes fstrim_range structure as an argument. fstrim_range is definec in
the include/linux/fs.h and its definition is as follows.

struct fstrim_range {
	__u64 start;
	__u64 len;
	__u64 minlen;
}

start	- first Byte to trim
len	- number of Bytes to trim from start
minlen	- minimum extent length to trim, free extents shorter than this
  number of Bytes will be ignored. This will be rounded up to fs
  block size.

After the FITRIM is done, the number of actually discarded Bytes is stored
in fstrim_range.len to give the user better insight on how much storage
space has been really released for wear-leveling.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/ioctl.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index bf5ae883b1bd..eb3bc2fe647e 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -331,6 +331,30 @@ mext_out:
 		return err;
 	}
 
+	case FITRIM:
+	{
+		struct super_block *sb = inode->i_sb;
+		struct fstrim_range range;
+		int ret = 0;
+
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+
+		if (copy_from_user(&range, (struct fstrim_range *)arg,
+		    sizeof(range)))
+			return -EFAULT;
+
+		ret = ext4_trim_fs(sb, &range);
+		if (ret < 0)
+			return ret;
+
+		if (copy_to_user((struct fstrim_range *)arg, &range,
+		    sizeof(range)))
+			return -EFAULT;
+
+		return 0;
+	}
+
 	default:
 		return -ENOTTY;
 	}

From 9be4d4575906af9698de660e477f949a076c87e1 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Tue, 31 Aug 2010 15:01:16 -0700
Subject: [PATCH 0806/1066] xen: add extra pages to balloon

Add extra pages in the pseudo-physical address space to the balloon
so we can extend into them later.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/balloon.c | 15 +++++++++++----
 include/xen/page.h    |  7 +++++++
 2 files changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 500290b150bb..df26ee9caa68 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -119,7 +119,7 @@ static void scrub_page(struct page *page)
 }
 
 /* balloon_append: add the given page to the balloon. */
-static void balloon_append(struct page *page)
+static void __balloon_append(struct page *page)
 {
 	/* Lowmem is re-populated first, so highmem pages go at list tail. */
 	if (PageHighMem(page)) {
@@ -130,7 +130,11 @@ static void balloon_append(struct page *page)
 		list_add(&page->lru, &ballooned_pages);
 		balloon_stats.balloon_low++;
 	}
+}
 
+static void balloon_append(struct page *page)
+{
+	__balloon_append(page);
 	totalram_pages--;
 }
 
@@ -416,10 +420,13 @@ static int __init balloon_init(void)
 	register_balloon(&balloon_sysdev);
 
 	/* Initialise the balloon with excess memory space. */
-	for (pfn = xen_start_info->nr_pages; pfn < max_pfn; pfn++) {
+	for (pfn = PFN_UP(xen_extra_mem_start);
+	     pfn < PFN_DOWN(xen_extra_mem_start + xen_extra_mem_size);
+	     pfn++) {
 		page = pfn_to_page(pfn);
-		if (!PageReserved(page))
-			balloon_append(page);
+		/* totalram_pages doesn't include the boot-time
+		   balloon extension, so don't subtract from it. */
+		__balloon_append(page);
 	}
 
 	target_watch.callback = watch_target;
diff --git a/include/xen/page.h b/include/xen/page.h
index eaf85fab1263..0be36b976f4b 100644
--- a/include/xen/page.h
+++ b/include/xen/page.h
@@ -1 +1,8 @@
+#ifndef _XEN_PAGE_H
+#define _XEN_PAGE_H
+
 #include <asm/xen/page.h>
+
+extern phys_addr_t xen_extra_mem_start, xen_extra_mem_size;
+
+#endif	/* _XEN_PAGE_H */

From 2f70e0acd496398671606767122846278126a88b Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Thu, 2 Sep 2010 23:11:17 -0700
Subject: [PATCH 0807/1066] xen/balloon: the balloon_lock is useless

The balloon_lock is useless, since it protects nothing against nothing.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/balloon.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index df26ee9caa68..77b5dc3597e3 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -195,7 +195,7 @@ static unsigned long current_target(void)
 
 static int increase_reservation(unsigned long nr_pages)
 {
-	unsigned long  pfn, i, flags;
+	unsigned long  pfn, i;
 	struct page   *page;
 	long           rc;
 	struct xen_memory_reservation reservation = {
@@ -207,8 +207,6 @@ static int increase_reservation(unsigned long nr_pages)
 	if (nr_pages > ARRAY_SIZE(frame_list))
 		nr_pages = ARRAY_SIZE(frame_list);
 
-	spin_lock_irqsave(&xen_reservation_lock, flags);
-
 	page = balloon_first_page();
 	for (i = 0; i < nr_pages; i++) {
 		BUG_ON(page == NULL);
@@ -251,14 +249,12 @@ static int increase_reservation(unsigned long nr_pages)
 	balloon_stats.current_pages += rc;
 
  out:
-	spin_unlock_irqrestore(&xen_reservation_lock, flags);
-
 	return rc < 0 ? rc : rc != nr_pages;
 }
 
 static int decrease_reservation(unsigned long nr_pages)
 {
-	unsigned long  pfn, i, flags;
+	unsigned long  pfn, i;
 	struct page   *page;
 	int            need_sleep = 0;
 	int ret;
@@ -296,8 +292,6 @@ static int decrease_reservation(unsigned long nr_pages)
 	kmap_flush_unused();
 	flush_tlb_all();
 
-	spin_lock_irqsave(&xen_reservation_lock, flags);
-
 	/* No more mappings: invalidate P2M and add to balloon. */
 	for (i = 0; i < nr_pages; i++) {
 		pfn = mfn_to_pfn(frame_list[i]);
@@ -312,8 +306,6 @@ static int decrease_reservation(unsigned long nr_pages)
 
 	balloon_stats.current_pages -= nr_pages;
 
-	spin_unlock_irqrestore(&xen_reservation_lock, flags);
-
 	return need_sleep;
 }
 

From 66946f676776a6ef333db1cf7453ecf8a66c90df Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Tue, 14 Sep 2010 10:32:32 -0700
Subject: [PATCH 0808/1066] xen/balloon: make sure we only include remaining
 extra ram

If the user specifies mem= on the kernel command line, some or all
of the extra memory E820 region may be clipped away, so make sure
we don't try to add more extra memory than exists in E820.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/balloon.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 77b5dc3597e3..2b17ad5b4b32 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -50,6 +50,7 @@
 #include <asm/pgtable.h>
 #include <asm/uaccess.h>
 #include <asm/tlb.h>
+#include <asm/e820.h>
 
 #include <asm/xen/hypervisor.h>
 #include <asm/xen/hypercall.h>
@@ -391,7 +392,7 @@ static struct notifier_block xenstore_notifier;
 
 static int __init balloon_init(void)
 {
-	unsigned long pfn;
+	unsigned long pfn, extra_pfn_end;
 	struct page *page;
 
 	if (!xen_pv_domain())
@@ -412,8 +413,10 @@ static int __init balloon_init(void)
 	register_balloon(&balloon_sysdev);
 
 	/* Initialise the balloon with excess memory space. */
+	extra_pfn_end = min(e820_end_of_ram_pfn(),
+			    (unsigned long)PFN_DOWN(xen_extra_mem_start + xen_extra_mem_size));
 	for (pfn = PFN_UP(xen_extra_mem_start);
-	     pfn < PFN_DOWN(xen_extra_mem_start + xen_extra_mem_size);
+	     pfn < extra_pfn_end;
 	     pfn++) {
 		page = pfn_to_page(pfn);
 		/* totalram_pages doesn't include the boot-time

From d2a817130cdc142f1c80a8e60eca824a321926af Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 19 Nov 2010 23:27:06 -0800
Subject: [PATCH 0809/1066] xen: re-enable boot-time ballooning

Now that the balloon driver doesn't stumble over non-RAM pages, we
can enable the extra space for ballooning.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/setup.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 769c4b01fa32..630fb53c95f3 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -248,8 +248,7 @@ char * __init xen_memory_setup(void)
 	else
 		extra_pages = 0;
 
-	if (!xen_initial_domain())
-		xen_add_extra_mem(extra_pages);
+	xen_add_extra_mem(extra_pages);
 
 	return "Xen";
 }

From c0ba10b512eb2e2a3888b6e6cc0e089f5e7a191b Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 21 Nov 2010 14:42:47 +0000
Subject: [PATCH 0810/1066] ARM: improve compiler's ability to optimize page
 tables

Allow the compiler to better optimize the page table walking code
by avoiding over-complex pmd_addr_end() calculations.  These
calculations prevent the compiler spotting that we'll never iterate
over the PMD table, causing it to create double nested loops where
a single loop will do.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/pgtable.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index b155414192da..53d1d5deb111 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -374,6 +374,9 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 
 #define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
 
+/* we don't need complex calculations here as the pmd is folded into the pgd */
+#define pmd_addr_end(addr,end)	(end)
+
 /*
  * Conversion functions: convert a page and protection to a page entry,
  * and a page entry and page directory to the page they refer to.

From ab08853fab2093e5c6f5de56827a4c93dce4b055 Mon Sep 17 00:00:00 2001
From: Anupam Chanda <anupamc@vmware.com>
Date: Sun, 21 Nov 2010 09:54:21 -0800
Subject: [PATCH 0811/1066] e1000: fix screaming IRQ

VMWare reports that the e1000 driver has a bug when bringing down the
interface, such that interrupts are not disabled in the hardware but the
driver stops reporting that it consumed the interrupt.

The fix is to set the driver's "down" flag later in the routine,
after all the timers and such have exited, preventing the interrupt
handler from being called and exiting early without handling the
interrupt.

CC: Anupam Chanda <anupamc@vmware.com>
CC: stable kernel <stable@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000/e1000_main.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 4686c3983fc3..4d62f7bfa036 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -31,7 +31,7 @@
 
 char e1000_driver_name[] = "e1000";
 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
-#define DRV_VERSION "7.3.21-k6-NAPI"
+#define DRV_VERSION "7.3.21-k8-NAPI"
 const char e1000_driver_version[] = DRV_VERSION;
 static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
 
@@ -485,9 +485,6 @@ void e1000_down(struct e1000_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 	u32 rctl, tctl;
 
-	/* signal that we're down so the interrupt handler does not
-	 * reschedule our watchdog timer */
-	set_bit(__E1000_DOWN, &adapter->flags);
 
 	/* disable receives in the hardware */
 	rctl = er32(RCTL);
@@ -508,6 +505,13 @@ void e1000_down(struct e1000_adapter *adapter)
 
 	e1000_irq_disable(adapter);
 
+	/*
+	 * Setting DOWN must be after irq_disable to prevent
+	 * a screaming interrupt.  Setting DOWN also prevents
+	 * timers and tasks from rescheduling.
+	 */
+	set_bit(__E1000_DOWN, &adapter->flags);
+
 	del_timer_sync(&adapter->tx_fifo_stall_timer);
 	del_timer_sync(&adapter->watchdog_timer);
 	del_timer_sync(&adapter->phy_info_timer);

From a6c36ee677607b02d8ecc88e8a12785418b88107 Mon Sep 17 00:00:00 2001
From: Simon Horman <horms@verge.net.au>
Date: Sun, 21 Nov 2010 09:58:04 -0800
Subject: [PATCH 0812/1066] bonding: change list contact to
 netdev@vger.kernel.org

bonding-devel@lists.sourceforge.net seems only receive spam
and discussion seems to already occur on netdev@vger.kernel.org.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 8b6ca96435ee..9206cb462913 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1359,7 +1359,7 @@ F:	include/net/bluetooth/
 
 BONDING DRIVER
 M:	Jay Vosburgh <fubar@us.ibm.com>
-L:	bonding-devel@lists.sourceforge.net
+L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
 F:	drivers/net/bonding/

From 7a1c8e5ab120a5f352e78bbc1fa5bb64e6f23639 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Sat, 20 Nov 2010 07:46:35 +0000
Subject: [PATCH 0813/1066] net: allow GFP_HIGHMEM in __vmalloc()

We forgot to use __GFP_HIGHMEM in several __vmalloc() calls.

In ceph, add the missing flag.

In fib_trie.c, xfrm_hash.c and request_sock.c, using vzalloc() is
cleaner and allows using HIGHMEM pages as well.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ceph/buffer.c       | 2 +-
 net/core/request_sock.c | 4 +---
 net/ipv4/fib_trie.c     | 2 +-
 net/xfrm/xfrm_hash.c    | 2 +-
 4 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/net/ceph/buffer.c b/net/ceph/buffer.c
index 53d8abfa25d5..bf3e6a13c215 100644
--- a/net/ceph/buffer.c
+++ b/net/ceph/buffer.c
@@ -19,7 +19,7 @@ struct ceph_buffer *ceph_buffer_new(size_t len, gfp_t gfp)
 	if (b->vec.iov_base) {
 		b->is_vmalloc = false;
 	} else {
-		b->vec.iov_base = __vmalloc(len, gfp, PAGE_KERNEL);
+		b->vec.iov_base = __vmalloc(len, gfp | __GFP_HIGHMEM, PAGE_KERNEL);
 		if (!b->vec.iov_base) {
 			kfree(b);
 			return NULL;
diff --git a/net/core/request_sock.c b/net/core/request_sock.c
index 7552495aff7a..fceeb37d7161 100644
--- a/net/core/request_sock.c
+++ b/net/core/request_sock.c
@@ -45,9 +45,7 @@ int reqsk_queue_alloc(struct request_sock_queue *queue,
 	nr_table_entries = roundup_pow_of_two(nr_table_entries + 1);
 	lopt_size += nr_table_entries * sizeof(struct request_sock *);
 	if (lopt_size > PAGE_SIZE)
-		lopt = __vmalloc(lopt_size,
-			GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO,
-			PAGE_KERNEL);
+		lopt = vzalloc(lopt_size);
 	else
 		lopt = kzalloc(lopt_size, GFP_KERNEL);
 	if (lopt == NULL)
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 200eb538fbb3..0f280348e0fd 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -365,7 +365,7 @@ static struct tnode *tnode_alloc(size_t size)
 	if (size <= PAGE_SIZE)
 		return kzalloc(size, GFP_KERNEL);
 	else
-		return __vmalloc(size, GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL);
+		return vzalloc(size);
 }
 
 static void __tnode_vfree(struct work_struct *arg)
diff --git a/net/xfrm/xfrm_hash.c b/net/xfrm/xfrm_hash.c
index a2023ec52329..1e98bc0fe0a5 100644
--- a/net/xfrm/xfrm_hash.c
+++ b/net/xfrm/xfrm_hash.c
@@ -19,7 +19,7 @@ struct hlist_head *xfrm_hash_alloc(unsigned int sz)
 	if (sz <= PAGE_SIZE)
 		n = kzalloc(sz, GFP_KERNEL);
 	else if (hashdist)
-		n = __vmalloc(sz, GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL);
+		n = vzalloc(sz);
 	else
 		n = (struct hlist_head *)
 			__get_free_pages(GFP_KERNEL | __GFP_NOWARN | __GFP_ZERO,

From 33ac0b84eecaf5e7ee3baa3ef8294e8d8d267cd6 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Sun, 21 Nov 2010 10:06:48 -0800
Subject: [PATCH 0814/1066] atl1c: Fix hardware type check for enabling OTP CLK

Commit 496c185c9495629ef1c65387cb2594578393cfe0 "atl1c: Add support
for Atheros AR8152 and AR8152" added the condition:

             if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b)

for enabling OTP CLK, and the condition:

             if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c)

for disabling OTP CLK.  Since the two previously defined hardware
types are athr_l1c and athr_l2c, the latter condition appears to be
the correct one.  Change the former to match.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/atl1c/atl1c_hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/atl1c/atl1c_hw.c b/drivers/net/atl1c/atl1c_hw.c
index 919080b2c3a5..1bf672009948 100644
--- a/drivers/net/atl1c/atl1c_hw.c
+++ b/drivers/net/atl1c/atl1c_hw.c
@@ -82,7 +82,7 @@ static int atl1c_get_permanent_address(struct atl1c_hw *hw)
 	addr[0] = addr[1] = 0;
 	AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data);
 	if (atl1c_check_eeprom_exist(hw)) {
-		if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b) {
+		if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c) {
 			/* Enable OTP CLK */
 			if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) {
 				otp_ctrl_data |= OTP_CTRL_CLK_EN;

From ddab1a3b30452bf6d2a2780dbb5fd962a85bec48 Mon Sep 17 00:00:00 2001
From: Nicolas Kaiser <nikai@nikai.net>
Date: Thu, 18 Nov 2010 14:24:02 +0000
Subject: [PATCH 0815/1066] SuperH IrDA: correct Baud rate error correction

It looks to me as if the second value of rate_err_array is intended
to be a decimal 625. However, with a leading 0 it becomes an octal
constant, and as such evaluates to a decimal 405.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/irda/sh_sir.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/irda/sh_sir.c b/drivers/net/irda/sh_sir.c
index 00b38bccd6d0..52a7c86af663 100644
--- a/drivers/net/irda/sh_sir.c
+++ b/drivers/net/irda/sh_sir.c
@@ -258,7 +258,7 @@ static int sh_sir_set_baudrate(struct sh_sir_self *self, u32 baudrate)
 
 	/* Baud Rate Error Correction x 10000 */
 	u32 rate_err_array[] = {
-		0000, 0625, 1250, 1875,
+		   0,  625, 1250, 1875,
 		2500, 3125, 3750, 4375,
 		5000, 5625, 6250, 6875,
 		7500, 8125, 8750, 9375,

From ffc43ef31395063d32e72de0a9c3d061347c3b94 Mon Sep 17 00:00:00 2001
From: Per Fransson <per.xx.fransson@stericsson.com>
Date: Mon, 15 Nov 2010 14:31:17 +0100
Subject: [PATCH 0816/1066] ARM: 6473/1: Small update to ux500 specific L2
 cache code

This change updates the ux500 specific outer cache code to use
the new *_relaxed() I/O accessors.

Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ux500/cpu.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 73fb1a551ec6..608a1372b172 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -75,14 +75,14 @@ void __init ux500_init_irq(void)
 static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
 {
 	/* wait for the operation to complete */
-	while (readl(reg) & mask)
+	while (readl_relaxed(reg) & mask)
 		;
 }
 
 static inline void ux500_cache_sync(void)
 {
 	void __iomem *base = __io_address(UX500_L2CC_BASE);
-	writel(0, base + L2X0_CACHE_SYNC);
+	writel_relaxed(0, base + L2X0_CACHE_SYNC);
 	ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
@@ -107,7 +107,7 @@ static void ux500_l2x0_inv_all(void)
 	uint32_t l2x0_way_mask = (1<<16) - 1;	/* Bitmask of active ways */
 
 	/* invalidate all ways */
-	writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
 	ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
 	ux500_cache_sync();
 }

From 963fec4e0f4993486ee91edfafba0c972834d8c3 Mon Sep 17 00:00:00 2001
From: Anand Gadiyar <gadiyar@ti.com>
Date: Wed, 17 Nov 2010 10:08:49 +0100
Subject: [PATCH 0817/1066] ARM: 6484/1: fix compile warning in mm/init.c

Commit 7c63984b86 (ARM: do not define VMALLOC_END relative to PAGE_OFFSET)
changed VMALLOC_END to be an explicit value. Before this, it was
relative to PAGE_OFFSET and therefore converted to unsigned long
as PAGE_OFFSET is an unsigned long. This introduced the following
build warning. Fix this by changing the explicit defines of
VMALLOC_END to be unsigned long.

  CC      arch/arm/mm/init.o
arch/arm/mm/init.c: In function 'mem_init':
arch/arm/mm/init.c:606: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int'

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Acked-by: Uwe Kleine-K <u.kleine-koenig@pengutronix.dee>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-aaec2000/include/mach/vmalloc.h   | 2 +-
 arch/arm/mach-bcmring/include/mach/vmalloc.h    | 2 +-
 arch/arm/mach-clps711x/include/mach/vmalloc.h   | 2 +-
 arch/arm/mach-ebsa110/include/mach/vmalloc.h    | 2 +-
 arch/arm/mach-footbridge/include/mach/vmalloc.h | 2 +-
 arch/arm/mach-h720x/include/mach/vmalloc.h      | 2 +-
 arch/arm/mach-integrator/include/mach/vmalloc.h | 2 +-
 arch/arm/mach-msm/include/mach/vmalloc.h        | 2 +-
 arch/arm/mach-netx/include/mach/vmalloc.h       | 2 +-
 arch/arm/mach-omap1/include/mach/vmalloc.h      | 2 +-
 arch/arm/mach-omap2/include/mach/vmalloc.h      | 2 +-
 arch/arm/mach-pnx4008/include/mach/vmalloc.h    | 2 +-
 arch/arm/mach-rpc/include/mach/vmalloc.h        | 2 +-
 arch/arm/mach-shark/include/mach/vmalloc.h      | 2 +-
 arch/arm/mach-versatile/include/mach/vmalloc.h  | 2 +-
 15 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
index cff4e0a996ce..a6299e8321bd 100644
--- a/arch/arm/mach-aaec2000/include/mach/vmalloc.h
+++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
@@ -11,6 +11,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END		0xd0000000
+#define VMALLOC_END		0xd0000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
index 3db3a09fd398..7397bd7817d9 100644
--- a/arch/arm/mach-bcmring/include/mach/vmalloc.h
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -22,4 +22,4 @@
  * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
  * larger physical memory designs better.
  */
-#define VMALLOC_END       0xf0000000
+#define VMALLOC_END       0xf0000000UL
diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
index 30b3a287ed88..467b96137e47 100644
--- a/arch/arm/mach-clps711x/include/mach/vmalloc.h
+++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
index 60bde56fba4c..ea141b7a3e03 100644
--- a/arch/arm/mach-ebsa110/include/mach/vmalloc.h
+++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define VMALLOC_END       0xdf000000
+#define VMALLOC_END       0xdf000000UL
diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
index 0ffbb7c85e59..40ba78e5782b 100644
--- a/arch/arm/mach-footbridge/include/mach/vmalloc.h
+++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  */
 
 
-#define VMALLOC_END       0xf0000000
+#define VMALLOC_END       0xf0000000UL
diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
index a45915b88756..8520b4a4d4e6 100644
--- a/arch/arm/mach-h720x/include/mach/vmalloc.h
+++ b/arch/arm/mach-h720x/include/mach/vmalloc.h
@@ -5,6 +5,6 @@
 #ifndef __ARCH_ARM_VMALLOC_H
 #define __ARCH_ARM_VMALLOC_H
 
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
 
 #endif
diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
index e056e7cf5645..2f5a2bafb11f 100644
--- a/arch/arm/mach-integrator/include/mach/vmalloc.h
+++ b/arch/arm/mach-integrator/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
index 31a32ad062dc..d138448eff16 100644
--- a/arch/arm/mach-msm/include/mach/vmalloc.h
+++ b/arch/arm/mach-msm/include/mach/vmalloc.h
@@ -16,7 +16,7 @@
 #ifndef __ASM_ARCH_MSM_VMALLOC_H
 #define __ASM_ARCH_MSM_VMALLOC_H
 
-#define VMALLOC_END	  0xd0000000
+#define VMALLOC_END	  0xd0000000UL
 
 #endif
 
diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
index 7cca3574308f..871f1ef7bff5 100644
--- a/arch/arm/mach-netx/include/mach/vmalloc.h
+++ b/arch/arm/mach-netx/include/mach/vmalloc.h
@@ -16,4 +16,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h
index b001f67d695b..22ec4a479577 100644
--- a/arch/arm/mach-omap1/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap1/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	0xd8000000
+#define VMALLOC_END	0xd8000000UL
diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h
index 4da31e997efe..866319947760 100644
--- a/arch/arm/mach-omap2/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap2/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	  0xf8000000
+#define VMALLOC_END	  0xf8000000UL
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
index 31b65ee07b0b..184913c71141 100644
--- a/arch/arm/mach-pnx4008/include/mach/vmalloc.h
+++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
  * area for the same reason. ;)
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
index 3bcd86fadb81..fb700228637a 100644
--- a/arch/arm/mach-rpc/include/mach/vmalloc.h
+++ b/arch/arm/mach-rpc/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define VMALLOC_END       0xdc000000
+#define VMALLOC_END       0xdc000000UL
diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
index 8e845b6a7cb5..b10df988526d 100644
--- a/arch/arm/mach-shark/include/mach/vmalloc.h
+++ b/arch/arm/mach-shark/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
 /*
  * arch/arm/mach-shark/include/mach/vmalloc.h
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
index ebd8a2543d3b..7d8e069ad51b 100644
--- a/arch/arm/mach-versatile/include/mach/vmalloc.h
+++ b/arch/arm/mach-versatile/include/mach/vmalloc.h
@@ -18,4 +18,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END		0xd8000000
+#define VMALLOC_END		0xd8000000UL

From 8fbb97a2bc9b8c91b5a4588ba80709e48dad3f16 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Fri, 19 Nov 2010 10:16:05 +0100
Subject: [PATCH 0818/1066] ARM: 6488/1: nomadik: prevent sched_clock()
 wraparound

The current implementation of sched_clock() for the Nomadik
family is based on the clock source that will wrap around without
any compensation. Currently on the Ux500 after 1030 seconds.

Utilize cnt32_to_63 to expand the sched_clock() counter to 63
bits and introduce a keepwarm() timer to assure that sched clock
and this cnt32_to_63 is called atleast once every half period.

When I print out the actual wrap-around time, and using
a year (3600*24*365 seconds) as minumum wrap limit I get an
actual wrap-around of:
sched_clock: using 55 bits @ 8333125 Hz wrap in 416 days

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-nomadik/timer.c | 89 +++++++++++++++++++++++++++++++----
 1 file changed, 80 insertions(+), 9 deletions(-)

diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index aedf9c1d645e..63cdc6025bd7 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2008 STMicroelectronics
  * Copyright (C) 2010 Alessandro Rubini
+ * Copyright (C) 2010 Linus Walleij for ST-Ericsson
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2, as
@@ -16,11 +17,13 @@
 #include <linux/clk.h>
 #include <linux/jiffies.h>
 #include <linux/err.h>
+#include <linux/cnt32_to_63.h>
+#include <linux/timer.h>
 #include <asm/mach/time.h>
 
 #include <plat/mtu.h>
 
-void __iomem *mtu_base; /* ssigned by machine code */
+void __iomem *mtu_base; /* Assigned by machine code */
 
 /*
  * Kernel assumes that sched_clock can be called early
@@ -48,16 +51,82 @@ static struct clocksource nmdk_clksrc = {
 /*
  * Override the global weak sched_clock symbol with this
  * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by OMAP implementation.)
+ * better resolution when scheduling the kernel.
+ *
+ * Because the hardware timer period may be quite short
+ * (32.3 secs on the 133 MHz MTU timer selection on ux500)
+ * and because cnt32_to_63() needs to be called at least once per
+ * half period to work properly, a kernel keepwarm() timer is set up
+ * to ensure this requirement is always met.
+ *
+ * Also the sched_clock timer will wrap around at some point,
+ * here we set it to run continously for a year.
  */
+#define SCHED_CLOCK_MIN_WRAP 3600*24*365
+static struct timer_list cnt32_to_63_keepwarm_timer;
+static u32 sched_mult;
+static u32 sched_shift;
+
 unsigned long long notrace sched_clock(void)
 {
-	return clocksource_cyc2ns(nmdk_clksrc.read(
-				  &nmdk_clksrc),
-				  nmdk_clksrc.mult,
-				  nmdk_clksrc.shift);
+	u64 cycles;
+
+	if (unlikely(!mtu_base))
+		return 0;
+
+	cycles = cnt32_to_63(-readl(mtu_base + MTU_VAL(0)));
+	/*
+	 * sched_mult is guaranteed to be even so will
+	 * shift out bit 63
+	 */
+	return (cycles * sched_mult) >> sched_shift;
+}
+
+/* Just kick sched_clock every so often */
+static void cnt32_to_63_keepwarm(unsigned long data)
+{
+	mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+	(void) sched_clock();
+}
+
+/*
+ * Set up a timer to keep sched_clock():s 32_to_63 algorithm warm
+ * once in half a 32bit timer wrap interval.
+ */
+static void __init nmdk_sched_clock_init(unsigned long rate)
+{
+	u32 v;
+	unsigned long delta;
+	u64 days;
+
+	/* Find the apropriate mult and shift factors */
+	clocks_calc_mult_shift(&sched_mult, &sched_shift,
+			       rate, NSEC_PER_SEC, SCHED_CLOCK_MIN_WRAP);
+	/* We need to multiply by an even number to get rid of bit 63 */
+	if (sched_mult & 1)
+		sched_mult++;
+
+	/* Let's see what we get, take max counter and scale it */
+	days = (0xFFFFFFFFFFFFFFFFLLU * sched_mult) >> sched_shift;
+	do_div(days, NSEC_PER_SEC);
+	do_div(days, (3600*24));
+
+	pr_info("sched_clock: using %d bits @ %lu Hz wrap in %lu days\n",
+		(64 - sched_shift), rate, (unsigned long) days);
+
+	/*
+	 * Program a timer to kick us at half 32bit wraparound
+	 * Formula: seconds per wrap = (2^32) / f
+	 */
+	v = 0xFFFFFFFFUL / rate;
+	/* We want half of the wrap time to keep cnt32_to_63 warm */
+	v /= 2;
+	pr_debug("sched_clock: prescaled timer rate: %lu Hz, "
+		 "initialize keepwarm timer every %d seconds\n", rate, v);
+	/* Convert seconds to jiffies */
+	delta = msecs_to_jiffies(v*1000);
+	setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, delta);
+	mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + delta));
 }
 
 /* Clockevent device: use one-shot mode */
@@ -161,13 +230,15 @@ void __init nmdk_timer_init(void)
 	writel(0, mtu_base + MTU_BGLR(0));
 	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
 
-	/* Now the scheduling clock is ready */
+	/* Now the clock source is ready */
 	nmdk_clksrc.read = nmdk_read_timer;
 
 	if (clocksource_register(&nmdk_clksrc))
 		pr_err("timer: failed to initialize clock source %s\n",
 		       nmdk_clksrc.name);
 
+	nmdk_sched_clock_init(rate);
+
 	/* Timer 1 is used for events */
 
 	clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);

From 1142b71d85894dcff1466dd6c871ea3c89e0352c Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Fri, 19 Nov 2010 13:18:31 +0100
Subject: [PATCH 0819/1066] ARM: 6489/1: thumb2: fix incorrect optimisation in
 usracc

Commit 8b592783 added a Thumb-2 variant of usracc which, when it is
called with \rept=2, calls usraccoff once with an offset of 0 and
secondly with a hard-coded offset of 4 in order to avoid incrementing
the pointer again. If \inc != 4 then we will store the data to the wrong
offset from \ptr. Luckily, the only caller that passes \rept=2 to this
function is __clear_user so we haven't been actively corrupting user data.

This patch fixes usracc to pass \inc instead of #4 to usraccoff
when it is called a second time.

Cc: <stable@kernel.org>
Reported-by: Tony Thompson <tony.thompson@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/assembler.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 062b58c029ab..749bb6622404 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -238,7 +238,7 @@
 	@ Slightly optimised to avoid incrementing the pointer twice
 	usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
 	.if	\rept == 2
-	usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
+	usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
 	.endif
 
 	add\cond \ptr, #\rept * \inc

From 3561d43fd289f590fdae672e5eb831b8d5cf0bf6 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun, 21 Nov 2010 15:18:56 -0800
Subject: [PATCH 0820/1066] Linux 2.6.37-rc3

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index ab5359db3d17..b31d21377e4c 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 37
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

From 784b4e29a26617589edd290dd2919735e190c06e Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Sun, 21 Nov 2010 22:20:49 -0500
Subject: [PATCH 0821/1066] Btrfs: add migrate page for metadata inode

Migrate page will directly call the btrfs btree writepage function,
which isn't actually allowed.

Our writepage assumes that you have locked the extent_buffer and
flagged the block as written.  Without doing these steps, we can
corrupt metadata blocks.

A later commit will remove the btree writepage function since
it is really only safely used internally by btrfs.  We
use writepages for everything else.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/disk-io.c | 27 +++++++++++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index b40dfe48017b..a67b98d58c2a 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -28,6 +28,7 @@
 #include <linux/freezer.h>
 #include <linux/crc32c.h>
 #include <linux/slab.h>
+#include <linux/migrate.h>
 #include "compat.h"
 #include "ctree.h"
 #include "disk-io.h"
@@ -355,6 +356,8 @@ static int csum_dirty_buffer(struct btrfs_root *root, struct page *page)
 	ret = btree_read_extent_buffer_pages(root, eb, start + PAGE_CACHE_SIZE,
 					     btrfs_header_generation(eb));
 	BUG_ON(ret);
+	WARN_ON(!btrfs_header_flag(eb, BTRFS_HEADER_FLAG_WRITTEN));
+
 	found_start = btrfs_header_bytenr(eb);
 	if (found_start != start) {
 		WARN_ON(1);
@@ -693,6 +696,26 @@ static int btree_submit_bio_hook(struct inode *inode, int rw, struct bio *bio,
 				   __btree_submit_bio_done);
 }
 
+static int btree_migratepage(struct address_space *mapping,
+			struct page *newpage, struct page *page)
+{
+	/*
+	 * we can't safely write a btree page from here,
+	 * we haven't done the locking hook
+	 */
+	if (PageDirty(page))
+		return -EAGAIN;
+	/*
+	 * Buffers may be managed in a filesystem specific way.
+	 * We must have no buffers or drop them.
+	 */
+	if (page_has_private(page) &&
+	    !try_to_release_page(page, GFP_KERNEL))
+		return -EAGAIN;
+
+	return migrate_page(mapping, newpage, page);
+}
+
 static int btree_writepage(struct page *page, struct writeback_control *wbc)
 {
 	struct extent_io_tree *tree;
@@ -707,8 +730,7 @@ static int btree_writepage(struct page *page, struct writeback_control *wbc)
 	}
 
 	redirty_page_for_writepage(wbc, page);
-	eb = btrfs_find_tree_block(root, page_offset(page),
-				      PAGE_CACHE_SIZE);
+	eb = btrfs_find_tree_block(root, page_offset(page), PAGE_CACHE_SIZE);
 	WARN_ON(!eb);
 
 	was_dirty = test_and_set_bit(EXTENT_BUFFER_DIRTY, &eb->bflags);
@@ -799,6 +821,7 @@ static const struct address_space_operations btree_aops = {
 	.releasepage	= btree_releasepage,
 	.invalidatepage = btree_invalidatepage,
 	.sync_page	= block_sync_page,
+	.migratepage	= btree_migratepage,
 };
 
 int readahead_tree_block(struct btrfs_root *root, u64 bytenr, u32 blocksize,

From 0c56fa9662927354255f2f64617d1de61fc03db9 Mon Sep 17 00:00:00 2001
From: Miao Xie <miaox@cn.fujitsu.com>
Date: Mon, 22 Nov 2010 03:01:39 +0000
Subject: [PATCH 0822/1066] btrfs: fix free dip and dip->csums twice

bio_endio() will free dip and dip->csums, so dip and dip->csums twice will
be freed twice. Fix it.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/inode.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 5132c9af888a..8c027aa0020a 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -5731,7 +5731,7 @@ static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode,
 
 	ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0);
 	if (ret)
-		goto out_err;
+		goto free_ordered;
 
 	if (write && !skip_sum) {
 		ret = btrfs_wq_submit_bio(BTRFS_I(inode)->root->fs_info,
@@ -5740,7 +5740,7 @@ static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode,
 				   __btrfs_submit_bio_start_direct_io,
 				   __btrfs_submit_bio_done);
 		if (ret)
-			goto out_err;
+			goto free_ordered;
 		return;
 	} else if (!skip_sum)
 		btrfs_lookup_bio_sums_dio(root, inode, bio,
@@ -5748,11 +5748,8 @@ static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode,
 
 	ret = btrfs_map_bio(root, rw, bio, 0, 1);
 	if (ret)
-		goto out_err;
+		goto free_ordered;
 	return;
-out_err:
-	kfree(dip->csums);
-	kfree(dip);
 free_ordered:
 	/*
 	 * If this is a write, we need to clean up the reserved space and kill

From 88f794ede7fadd4b63135b94d1561c1f2d5eb5f5 Mon Sep 17 00:00:00 2001
From: Miao Xie <miaox@cn.fujitsu.com>
Date: Mon, 22 Nov 2010 03:02:55 +0000
Subject: [PATCH 0823/1066] btrfs: cleanup duplicate bio allocating functions

extent_bio_alloc() and compressed_bio_alloc() are similar, cleanup
similar source code.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/compression.c | 15 +--------------
 fs/btrfs/extent_io.c   |  8 ++++----
 fs/btrfs/extent_io.h   |  3 +++
 3 files changed, 8 insertions(+), 18 deletions(-)

diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index 7845d1f7d1d9..b50bc4bd5c56 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -91,23 +91,10 @@ static inline int compressed_bio_size(struct btrfs_root *root,
 static struct bio *compressed_bio_alloc(struct block_device *bdev,
 					u64 first_byte, gfp_t gfp_flags)
 {
-	struct bio *bio;
 	int nr_vecs;
 
 	nr_vecs = bio_get_nr_vecs(bdev);
-	bio = bio_alloc(gfp_flags, nr_vecs);
-
-	if (bio == NULL && (current->flags & PF_MEMALLOC)) {
-		while (!bio && (nr_vecs /= 2))
-			bio = bio_alloc(gfp_flags, nr_vecs);
-	}
-
-	if (bio) {
-		bio->bi_size = 0;
-		bio->bi_bdev = bdev;
-		bio->bi_sector = first_byte >> 9;
-	}
-	return bio;
+	return btrfs_bio_alloc(bdev, first_byte >> 9, nr_vecs, gfp_flags);
 }
 
 static int check_compressed_csum(struct inode *inode,
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 3b7eaee0f912..f60aa3c35c23 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -1828,9 +1828,9 @@ static void end_bio_extent_preparewrite(struct bio *bio, int err)
 	bio_put(bio);
 }
 
-static struct bio *
-extent_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs,
-		 gfp_t gfp_flags)
+struct bio *
+btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs,
+		gfp_t gfp_flags)
 {
 	struct bio *bio;
 
@@ -1919,7 +1919,7 @@ static int submit_extent_page(int rw, struct extent_io_tree *tree,
 	else
 		nr = bio_get_nr_vecs(bdev);
 
-	bio = extent_bio_alloc(bdev, sector, nr, GFP_NOFS | __GFP_HIGH);
+	bio = btrfs_bio_alloc(bdev, sector, nr, GFP_NOFS | __GFP_HIGH);
 
 	bio_add_page(bio, page, page_size, offset);
 	bio->bi_end_io = end_io_func;
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index 1c6d4f342ef7..4183c8178f01 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -310,4 +310,7 @@ int extent_clear_unlock_delalloc(struct inode *inode,
 				struct extent_io_tree *tree,
 				u64 start, u64 end, struct page *locked_page,
 				unsigned long op);
+struct bio *
+btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs,
+		gfp_t gfp_flags);
 #endif

From e65e1535542931e51189832264cd282e5899e4b9 Mon Sep 17 00:00:00 2001
From: Miao Xie <miaox@cn.fujitsu.com>
Date: Mon, 22 Nov 2010 03:04:43 +0000
Subject: [PATCH 0824/1066] btrfs: fix panic caused by direct IO

btrfs paniced when we write >64KB data by direct IO at one time.

Reproduce steps:
 # mkfs.btrfs /dev/sda5 /dev/sda6
 # mount /dev/sda5 /mnt
 # dd if=/dev/zero of=/mnt/tmpfile bs=100K count=1 oflag=direct

Then btrfs paniced:
mapping failed logical 1103155200 bio len 69632 len 12288
------------[ cut here ]------------
kernel BUG at fs/btrfs/volumes.c:3010!
[SNIP]
Pid: 1992, comm: btrfs-worker-0 Not tainted 2.6.37-rc1 #1 D2399/PRIMERGY
RIP: 0010:[<ffffffffa03d1462>]  [<ffffffffa03d1462>] btrfs_map_bio+0x202/0x210 [btrfs]
[SNIP]
Call Trace:
 [<ffffffffa03ab3eb>] __btrfs_submit_bio_done+0x1b/0x20 [btrfs]
 [<ffffffffa03a35ff>] run_one_async_done+0x9f/0xb0 [btrfs]
 [<ffffffffa03d3d20>] run_ordered_completions+0x80/0xc0 [btrfs]
 [<ffffffffa03d45a4>] worker_loop+0x154/0x5f0 [btrfs]
 [<ffffffffa03d4450>] ? worker_loop+0x0/0x5f0 [btrfs]
 [<ffffffffa03d4450>] ? worker_loop+0x0/0x5f0 [btrfs]
 [<ffffffff81083216>] kthread+0x96/0xa0
 [<ffffffff8100cec4>] kernel_thread_helper+0x4/0x10
 [<ffffffff81083180>] ? kthread+0x0/0xa0
 [<ffffffff8100cec0>] ? kernel_thread_helper+0x0/0x10

We fix this problem by splitting bios when we submit bios.

Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/inode.c | 205 ++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 184 insertions(+), 21 deletions(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 8c027aa0020a..a47e4faa8c46 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -5535,13 +5535,21 @@ struct btrfs_dio_private {
 	u64 bytes;
 	u32 *csums;
 	void *private;
+
+	/* number of bios pending for this dio */
+	atomic_t pending_bios;
+
+	/* IO errors */
+	int errors;
+
+	struct bio *orig_bio;
 };
 
 static void btrfs_endio_direct_read(struct bio *bio, int err)
 {
+	struct btrfs_dio_private *dip = bio->bi_private;
 	struct bio_vec *bvec_end = bio->bi_io_vec + bio->bi_vcnt - 1;
 	struct bio_vec *bvec = bio->bi_io_vec;
-	struct btrfs_dio_private *dip = bio->bi_private;
 	struct inode *inode = dip->inode;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 	u64 start;
@@ -5684,6 +5692,176 @@ static int __btrfs_submit_bio_start_direct_io(struct inode *inode, int rw,
 	return 0;
 }
 
+static void btrfs_end_dio_bio(struct bio *bio, int err)
+{
+	struct btrfs_dio_private *dip = bio->bi_private;
+
+	if (err) {
+		printk(KERN_ERR "btrfs direct IO failed ino %lu rw %lu "
+		      "disk_bytenr %lu len %u err no %d\n",
+		      dip->inode->i_ino, bio->bi_rw, bio->bi_sector,
+		      bio->bi_size, err);
+		dip->errors = 1;
+
+		/*
+		 * before atomic variable goto zero, we must make sure
+		 * dip->errors is perceived to be set.
+		 */
+		smp_mb__before_atomic_dec();
+	}
+
+	/* if there are more bios still pending for this dio, just exit */
+	if (!atomic_dec_and_test(&dip->pending_bios))
+		goto out;
+
+	if (dip->errors)
+		bio_io_error(dip->orig_bio);
+	else {
+		set_bit(BIO_UPTODATE, &dip->orig_bio->bi_flags);
+		bio_endio(dip->orig_bio, 0);
+	}
+out:
+	bio_put(bio);
+}
+
+static struct bio *btrfs_dio_bio_alloc(struct block_device *bdev,
+				       u64 first_sector, gfp_t gfp_flags)
+{
+	int nr_vecs = bio_get_nr_vecs(bdev);
+	return btrfs_bio_alloc(bdev, first_sector, nr_vecs, gfp_flags);
+}
+
+static inline int __btrfs_submit_dio_bio(struct bio *bio, struct inode *inode,
+					 int rw, u64 file_offset, int skip_sum,
+					 u32 *csums)
+{
+	int write = rw & REQ_WRITE;
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	int ret;
+
+	bio_get(bio);
+	ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0);
+	if (ret)
+		goto err;
+
+	if (write && !skip_sum) {
+		ret = btrfs_wq_submit_bio(root->fs_info,
+				   inode, rw, bio, 0, 0,
+				   file_offset,
+				   __btrfs_submit_bio_start_direct_io,
+				   __btrfs_submit_bio_done);
+		goto err;
+	} else if (!skip_sum)
+		btrfs_lookup_bio_sums_dio(root, inode, bio,
+					  file_offset, csums);
+
+	ret = btrfs_map_bio(root, rw, bio, 0, 1);
+err:
+	bio_put(bio);
+	return ret;
+}
+
+static int btrfs_submit_direct_hook(int rw, struct btrfs_dio_private *dip,
+				    int skip_sum)
+{
+	struct inode *inode = dip->inode;
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	struct btrfs_mapping_tree *map_tree = &root->fs_info->mapping_tree;
+	struct bio *bio;
+	struct bio *orig_bio = dip->orig_bio;
+	struct bio_vec *bvec = orig_bio->bi_io_vec;
+	u64 start_sector = orig_bio->bi_sector;
+	u64 file_offset = dip->logical_offset;
+	u64 submit_len = 0;
+	u64 map_length;
+	int nr_pages = 0;
+	u32 *csums = dip->csums;
+	int ret = 0;
+
+	bio = btrfs_dio_bio_alloc(orig_bio->bi_bdev, start_sector, GFP_NOFS);
+	if (!bio)
+		return -ENOMEM;
+	bio->bi_private = dip;
+	bio->bi_end_io = btrfs_end_dio_bio;
+	atomic_inc(&dip->pending_bios);
+
+	map_length = orig_bio->bi_size;
+	ret = btrfs_map_block(map_tree, READ, start_sector << 9,
+			      &map_length, NULL, 0);
+	if (ret) {
+		bio_put(bio);
+		return -EIO;
+	}
+
+	while (bvec <= (orig_bio->bi_io_vec + orig_bio->bi_vcnt - 1)) {
+		if (unlikely(map_length < submit_len + bvec->bv_len ||
+		    bio_add_page(bio, bvec->bv_page, bvec->bv_len,
+				 bvec->bv_offset) < bvec->bv_len)) {
+			/*
+			 * inc the count before we submit the bio so
+			 * we know the end IO handler won't happen before
+			 * we inc the count. Otherwise, the dip might get freed
+			 * before we're done setting it up
+			 */
+			atomic_inc(&dip->pending_bios);
+			ret = __btrfs_submit_dio_bio(bio, inode, rw,
+						     file_offset, skip_sum,
+						     csums);
+			if (ret) {
+				bio_put(bio);
+				atomic_dec(&dip->pending_bios);
+				goto out_err;
+			}
+
+			if (!skip_sum)
+				csums = csums + nr_pages;
+			start_sector += submit_len >> 9;
+			file_offset += submit_len;
+
+			submit_len = 0;
+			nr_pages = 0;
+
+			bio = btrfs_dio_bio_alloc(orig_bio->bi_bdev,
+						  start_sector, GFP_NOFS);
+			if (!bio)
+				goto out_err;
+			bio->bi_private = dip;
+			bio->bi_end_io = btrfs_end_dio_bio;
+
+			map_length = orig_bio->bi_size;
+			ret = btrfs_map_block(map_tree, READ, start_sector << 9,
+					      &map_length, NULL, 0);
+			if (ret) {
+				bio_put(bio);
+				goto out_err;
+			}
+		} else {
+			submit_len += bvec->bv_len;
+			nr_pages ++;
+			bvec++;
+		}
+	}
+
+	ret = __btrfs_submit_dio_bio(bio, inode, rw, file_offset, skip_sum,
+				     csums);
+	if (!ret)
+		return 0;
+
+	bio_put(bio);
+out_err:
+	dip->errors = 1;
+	/*
+	 * before atomic variable goto zero, we must
+	 * make sure dip->errors is perceived to be set.
+	 */
+	smp_mb__before_atomic_dec();
+	if (atomic_dec_and_test(&dip->pending_bios))
+		bio_io_error(dip->orig_bio);
+
+	/* bio_end_io() will handle error, so we needn't return it */
+	return 0;
+}
+
 static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode,
 				loff_t file_offset)
 {
@@ -5723,33 +5901,18 @@ static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode,
 
 	dip->disk_bytenr = (u64)bio->bi_sector << 9;
 	bio->bi_private = dip;
+	dip->errors = 0;
+	dip->orig_bio = bio;
+	atomic_set(&dip->pending_bios, 0);
 
 	if (write)
 		bio->bi_end_io = btrfs_endio_direct_write;
 	else
 		bio->bi_end_io = btrfs_endio_direct_read;
 
-	ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0);
-	if (ret)
-		goto free_ordered;
-
-	if (write && !skip_sum) {
-		ret = btrfs_wq_submit_bio(BTRFS_I(inode)->root->fs_info,
-				   inode, rw, bio, 0, 0,
-				   dip->logical_offset,
-				   __btrfs_submit_bio_start_direct_io,
-				   __btrfs_submit_bio_done);
-		if (ret)
-			goto free_ordered;
+	ret = btrfs_submit_direct_hook(rw, dip, skip_sum);
+	if (!ret)
 		return;
-	} else if (!skip_sum)
-		btrfs_lookup_bio_sums_dio(root, inode, bio,
-					  dip->logical_offset, dip->csums);
-
-	ret = btrfs_map_bio(root, rw, bio, 0, 1);
-	if (ret)
-		goto free_ordered;
-	return;
 free_ordered:
 	/*
 	 * If this is a write, we need to clean up the reserved space and kill

From 6f33434850ed87dc5e56b60ebbad3d3cf405f296 Mon Sep 17 00:00:00 2001
From: Arne Jansen <sensille@gmx.net>
Date: Fri, 12 Nov 2010 23:17:56 +0000
Subject: [PATCH 0825/1066] btrfs: Fix early enospc because 'unused' calculated
 with wrong sign.

'unused' calculated with wrong sign in reserve_metadata_bytes().
This might have lead to unwanted over-reservations.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/extent-tree.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index a541bc87f04c..ddaf6340fe7f 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -3413,7 +3413,7 @@ again:
 	 * our reservation.
 	 */
 	if (unused <= space_info->total_bytes) {
-		unused -= space_info->total_bytes;
+		unused = space_info->total_bytes - unused;
 		if (unused >= num_bytes) {
 			if (!reserved)
 				space_info->bytes_reserved += orig_bytes;

From 0de90876c6cb774d4a424dafc1fc9ec50071b81b Mon Sep 17 00:00:00 2001
From: Josef Bacik <josef@redhat.com>
Date: Fri, 19 Nov 2010 13:40:41 +0000
Subject: [PATCH 0826/1066] Btrfs: handle the space_cache option properly

When I added the clear_cache option I screwed up and took the break out of
the space_cache case statement, so whenever you mount with space_cache you also
get clear_cache, which does you no good if you say set space_cache in fstab so
it always gets set.  This patch adds the break back in properly.

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/super.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 718b10de2049..66e4612a7916 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -244,6 +244,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 		case Opt_space_cache:
 			printk(KERN_INFO "btrfs: enabling disk space caching\n");
 			btrfs_set_opt(info->mount_opt, SPACE_CACHE);
+			break;
 		case Opt_clear_cache:
 			printk(KERN_INFO "btrfs: force clearing of disk cache\n");
 			btrfs_set_opt(info->mount_opt, CLEAR_CACHE);

From 2a6b8daedaf3682bed3fc1d4e2390491f6e19c49 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Fri, 19 Nov 2010 01:36:10 +0000
Subject: [PATCH 0827/1066] btrfs: Check if dest_offset is block-size aligned
 before cloning file

We've done the check for src_offset and src_length, and We should
also check dest_offset, otherwise we'll corrupt the destination
file:

  (After cloning file1 to file2 with unaligned dest_offset)
  # cat /mnt/file2
  cat: /mnt/file2: Input/output error

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/ioctl.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 463d91b4dd3a..81b47bd8a55a 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1669,12 +1669,11 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
 		olen = len = src->i_size - off;
 	/* if we extend to eof, continue to block boundary */
 	if (off + len == src->i_size)
-		len = ((src->i_size + bs-1) & ~(bs-1))
-			- off;
+		len = ALIGN(src->i_size, bs) - off;
 
 	/* verify the end result is block aligned */
-	if ((off & (bs-1)) ||
-	    ((off + len) & (bs-1)))
+	if (!IS_ALIGNED(off, bs) || !IS_ALIGNED(off + len, bs) ||
+	    !IS_ALIGNED(destoff, bs))
 		goto out_unlock;
 
 	/* do any pending delalloc/csum calc on src, one way or

From 5f3888ff6f0b9dce60705765752b788a92557644 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Fri, 19 Nov 2010 01:36:34 +0000
Subject: [PATCH 0828/1066] btrfs: Set file size correctly in file clone

Set src_offset = 0, src_length = 20K, dest_offset = 20K. And the
original filesize of the dest file 'file2' is 30K:

  # ls -l /mnt/file2
  -rw-r--r-- 1 root root 30720 Nov 18 16:42 /mnt/file2

Now clone file1 to file2, the dest file should be 40K, but it
still shows 30K:

  # ls -l /mnt/file2
  -rw-r--r-- 1 root root 30720 Nov 18 16:42 /mnt/file2

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/ioctl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 81b47bd8a55a..6b4bfa72bf8d 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1873,8 +1873,8 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
 			 * but shouldn't round up the file size
 			 */
 			endoff = new_key.offset + datal;
-			if (endoff > off+olen)
-				endoff = off+olen;
+			if (endoff > destoff+olen)
+				endoff = destoff+olen;
 			if (endoff > inode->i_size)
 				btrfs_i_size_write(inode, endoff);
 

From f209561ad83c5ffd561dc4bc3a3c90b704fe9231 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Fri, 19 Nov 2010 02:05:24 +0000
Subject: [PATCH 0829/1066] btrfs: Show device attr correctly for symlinks
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Symlinks and files of other types show different device numbers, though
they are on the same partition:

 $ touch tmp; ln -s tmp tmp2; stat tmp tmp2
   File: `tmp'
   Size: 0         	Blocks: 0          IO Block: 4096   regular empty file
 Device: 15h/21d	Inode: 984027      Links: 1
 --- snip ---
   File: `tmp2' -> `tmp'
   Size: 3         	Blocks: 0          IO Block: 4096   symbolic link
 Device: 13h/19d	Inode: 984028      Links: 1

Reported-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/inode.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index a47e4faa8c46..eed357ff6c99 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -7299,6 +7299,7 @@ static const struct inode_operations btrfs_symlink_inode_operations = {
 	.readlink	= generic_readlink,
 	.follow_link	= page_follow_link_light,
 	.put_link	= page_put_link,
+	.getattr	= btrfs_getattr,
 	.permission	= btrfs_permission,
 	.setxattr	= btrfs_setxattr,
 	.getxattr	= btrfs_getxattr,

From 0410c94aff109c02b6774a0ed00114987cda7ce5 Mon Sep 17 00:00:00 2001
From: Mariusz Kozlowski <mk@lab.zgora.pl>
Date: Sat, 20 Nov 2010 12:03:07 +0000
Subject: [PATCH 0830/1066] btrfs: make 1-bit signed fileds unsigned

Fixes these sparse warnings:
fs/btrfs/ctree.h:811:17: error: dubious one-bit signed bitfield
fs/btrfs/ctree.h:812:20: error: dubious one-bit signed bitfield
fs/btrfs/ctree.h:813:19: error: dubious one-bit signed bitfield

Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/ctree.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 8db9234f6b41..af52f6d7a4d8 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -808,9 +808,9 @@ struct btrfs_block_group_cache {
 	int extents_thresh;
 	int free_extents;
 	int total_bitmaps;
-	int ro:1;
-	int dirty:1;
-	int iref:1;
+	unsigned int ro:1;
+	unsigned int dirty:1;
+	unsigned int iref:1;
 
 	int disk_cache_state;
 

From 2ede0daf01549cecf4bb0962c46dc47382047523 Mon Sep 17 00:00:00 2001
From: Josef Bacik <josef@redhat.com>
Date: Wed, 17 Nov 2010 18:54:54 +0000
Subject: [PATCH 0831/1066] Btrfs: handle NFS lookups properly

People kept reporting NFS issues, specifically getting ESTALE alot.  I figured
out how to reproduce the problem

SERVER
mkfs.btrfs /dev/sda1
mount /dev/sda1 /mnt/btrfs-test
<add /mnt/btrfs-test to /etc/exports>
btrfs subvol create /mnt/btrfs-test/foo
service nfs start

CLIENT
mount server:/mnt/btrfs /mnt/test
cd /mnt/test/foo
ls

SERVER
echo 3 > /proc/sys/vm/drop_caches

CLIENT
ls			<-- get an ESTALE here

This is because the standard way to lookup a name in nfsd is to use readdir, and
what it does is do a readdir on the parent directory looking for the inode of
the child.  So in this case the parent being / and the child being foo.  Well
subvols all have the same inode number, so doing a readdir of / looking for
inode 256 will return '.', which obviously doesn't match foo.  So instead we
need to have our own .get_name so that we can find the right name.

Our .get_name will either lookup the inode backref or the root backref,
whichever we're looking for, and return the name we find.  Running the above
reproducer with this patch results in everything acting the way its supposed to.
Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/export.c | 76 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 76 insertions(+)

diff --git a/fs/btrfs/export.c b/fs/btrfs/export.c
index 951ef09b82f4..6f0444473594 100644
--- a/fs/btrfs/export.c
+++ b/fs/btrfs/export.c
@@ -232,9 +232,85 @@ fail:
 	return ERR_PTR(ret);
 }
 
+static int btrfs_get_name(struct dentry *parent, char *name,
+			  struct dentry *child)
+{
+	struct inode *inode = child->d_inode;
+	struct inode *dir = parent->d_inode;
+	struct btrfs_path *path;
+	struct btrfs_root *root = BTRFS_I(dir)->root;
+	struct btrfs_inode_ref *iref;
+	struct btrfs_root_ref *rref;
+	struct extent_buffer *leaf;
+	unsigned long name_ptr;
+	struct btrfs_key key;
+	int name_len;
+	int ret;
+
+	if (!dir || !inode)
+		return -EINVAL;
+
+	if (!S_ISDIR(dir->i_mode))
+		return -EINVAL;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+	path->leave_spinning = 1;
+
+	if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) {
+		key.objectid = BTRFS_I(inode)->root->root_key.objectid;
+		key.type = BTRFS_ROOT_BACKREF_KEY;
+		key.offset = (u64)-1;
+		root = root->fs_info->tree_root;
+	} else {
+		key.objectid = inode->i_ino;
+		key.offset = dir->i_ino;
+		key.type = BTRFS_INODE_REF_KEY;
+	}
+
+	ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+	if (ret < 0) {
+		btrfs_free_path(path);
+		return ret;
+	} else if (ret > 0) {
+		if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) {
+			path->slots[0]--;
+		} else {
+			btrfs_free_path(path);
+			return -ENOENT;
+		}
+	}
+	leaf = path->nodes[0];
+
+	if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) {
+	       rref = btrfs_item_ptr(leaf, path->slots[0],
+				     struct btrfs_root_ref);
+	       name_ptr = (unsigned long)(rref + 1);
+	       name_len = btrfs_root_ref_name_len(leaf, rref);
+	} else {
+		iref = btrfs_item_ptr(leaf, path->slots[0],
+				      struct btrfs_inode_ref);
+		name_ptr = (unsigned long)(iref + 1);
+		name_len = btrfs_inode_ref_name_len(leaf, iref);
+	}
+
+	read_extent_buffer(leaf, name, name_ptr, name_len);
+	btrfs_free_path(path);
+
+	/*
+	 * have to add the null termination to make sure that reconnect_path
+	 * gets the right len for strlen
+	 */
+	name[name_len] = '\0';
+
+	return 0;
+}
+
 const struct export_operations btrfs_export_ops = {
 	.encode_fh	= btrfs_encode_fh,
 	.fh_to_dentry	= btrfs_fh_to_dentry,
 	.fh_to_parent	= btrfs_fh_to_parent,
 	.get_parent	= btrfs_get_parent,
+	.get_name	= btrfs_get_name,
 };

From 76195853903ca613ba722203db9b747d70478fc7 Mon Sep 17 00:00:00 2001
From: Josef Bacik <josef@redhat.com>
Date: Fri, 19 Nov 2010 02:18:02 +0000
Subject: [PATCH 0832/1066] Btrfs: fix more ESTALE problems with NFS

When creating new inodes we don't setup inode->i_generation.  So if we generate
an fh with a newly created inode we save the generation of 0, but if we flush
the inode to disk and have to read it back when getting the inode on the server
we'll have the right i_generation, so gens wont match and we get ESTALE.  This
patch properly sets inode->i_generation when we create the new inode and now I'm
no longer getting ESTALE.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/inode.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index eed357ff6c99..fc22f556aa24 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -4501,6 +4501,7 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans,
 	BTRFS_I(inode)->index_cnt = 2;
 	BTRFS_I(inode)->root = root;
 	BTRFS_I(inode)->generation = trans->transid;
+	inode->i_generation = BTRFS_I(inode)->generation;
 	btrfs_set_inode_space_info(root, inode);
 
 	if (mode & S_IFDIR)

From 6a912213046ecb6511fdf35531a0c7de3de963c9 Mon Sep 17 00:00:00 2001
From: Josef Bacik <josef@redhat.com>
Date: Sat, 20 Nov 2010 09:48:00 +0000
Subject: [PATCH 0833/1066] Btrfs: use dget_parent where we can UPDATED

There are lots of places where we do dentry->d_parent->d_inode without holding
the dentry->d_lock.  This could cause problems with rename.  So instead we need
to use dget_parent() and hold the reference to the parent as long as we are
going to use it's inode and then dput it at the end.

Signed-off-by: Josef Bacik <josef@redhat.com>
Cc: raven@themaw.net
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/inode.c       |  9 ++++++---
 fs/btrfs/ioctl.c       | 20 ++++++++++++++++----
 fs/btrfs/transaction.c |  5 ++++-
 fs/btrfs/tree-log.c    | 21 +++++++++++++++++----
 4 files changed, 43 insertions(+), 12 deletions(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index fc22f556aa24..c0faf47d0cd9 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -4811,10 +4811,12 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir,
 	if (err) {
 		drop_inode = 1;
 	} else {
+		struct dentry *parent = dget_parent(dentry);
 		btrfs_update_inode_block_group(trans, dir);
 		err = btrfs_update_inode(trans, root, inode);
 		BUG_ON(err);
-		btrfs_log_new_name(trans, inode, NULL, dentry->d_parent);
+		btrfs_log_new_name(trans, inode, NULL, parent);
+		dput(parent);
 	}
 
 	nr = trans->blocks_used;
@@ -6768,8 +6770,9 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	BUG_ON(ret);
 
 	if (old_inode->i_ino != BTRFS_FIRST_FREE_OBJECTID) {
-		btrfs_log_new_name(trans, old_inode, old_dir,
-				   new_dentry->d_parent);
+		struct dentry *parent = dget_parent(new_dentry);
+		btrfs_log_new_name(trans, old_inode, old_dir, parent);
+		dput(parent);
 		btrfs_end_log_trans(root);
 	}
 out_fail:
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 6b4bfa72bf8d..f1c9bb4079ed 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -233,7 +233,8 @@ static noinline int create_subvol(struct btrfs_root *root,
 	struct btrfs_inode_item *inode_item;
 	struct extent_buffer *leaf;
 	struct btrfs_root *new_root;
-	struct inode *dir = dentry->d_parent->d_inode;
+	struct dentry *parent = dget_parent(dentry);
+	struct inode *dir;
 	int ret;
 	int err;
 	u64 objectid;
@@ -242,8 +243,13 @@ static noinline int create_subvol(struct btrfs_root *root,
 
 	ret = btrfs_find_free_objectid(NULL, root->fs_info->tree_root,
 				       0, &objectid);
-	if (ret)
+	if (ret) {
+		dput(parent);
 		return ret;
+	}
+
+	dir = parent->d_inode;
+
 	/*
 	 * 1 - inode item
 	 * 2 - refs
@@ -251,8 +257,10 @@ static noinline int create_subvol(struct btrfs_root *root,
 	 * 2 - dir items
 	 */
 	trans = btrfs_start_transaction(root, 6);
-	if (IS_ERR(trans))
+	if (IS_ERR(trans)) {
+		dput(parent);
 		return PTR_ERR(trans);
+	}
 
 	leaf = btrfs_alloc_free_block(trans, root, root->leafsize,
 				      0, objectid, NULL, 0, 0, 0);
@@ -339,6 +347,7 @@ static noinline int create_subvol(struct btrfs_root *root,
 
 	d_instantiate(dentry, btrfs_lookup_dentry(dir, dentry));
 fail:
+	dput(parent);
 	if (async_transid) {
 		*async_transid = trans->transid;
 		err = btrfs_commit_transaction_async(trans, root, 1);
@@ -354,6 +363,7 @@ static int create_snapshot(struct btrfs_root *root, struct dentry *dentry,
 			   char *name, int namelen, u64 *async_transid)
 {
 	struct inode *inode;
+	struct dentry *parent;
 	struct btrfs_pending_snapshot *pending_snapshot;
 	struct btrfs_trans_handle *trans;
 	int ret;
@@ -396,7 +406,9 @@ static int create_snapshot(struct btrfs_root *root, struct dentry *dentry,
 
 	btrfs_orphan_cleanup(pending_snapshot->snap);
 
-	inode = btrfs_lookup_dentry(dentry->d_parent->d_inode, dentry);
+	parent = dget_parent(dentry);
+	inode = btrfs_lookup_dentry(parent->d_inode, dentry);
+	dput(parent);
 	if (IS_ERR(inode)) {
 		ret = PTR_ERR(inode);
 		goto fail;
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 1fffbc017bdf..f50e931fc217 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -902,6 +902,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans,
 	struct btrfs_root *root = pending->root;
 	struct btrfs_root *parent_root;
 	struct inode *parent_inode;
+	struct dentry *parent;
 	struct dentry *dentry;
 	struct extent_buffer *tmp;
 	struct extent_buffer *old;
@@ -941,7 +942,8 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans,
 	trans->block_rsv = &pending->block_rsv;
 
 	dentry = pending->dentry;
-	parent_inode = dentry->d_parent->d_inode;
+	parent = dget_parent(dentry);
+	parent_inode = parent->d_inode;
 	parent_root = BTRFS_I(parent_inode)->root;
 	record_root_in_trans(trans, parent_root);
 
@@ -989,6 +991,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans,
 				 parent_inode->i_ino, index,
 				 dentry->d_name.name, dentry->d_name.len);
 	BUG_ON(ret);
+	dput(parent);
 
 	key.offset = (u64)-1;
 	pending->snap = btrfs_read_fs_root_no_name(root->fs_info, &key);
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index a29f19384a27..054744ac5719 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2869,6 +2869,7 @@ static noinline int check_parent_dirs_for_sync(struct btrfs_trans_handle *trans,
 {
 	int ret = 0;
 	struct btrfs_root *root;
+	struct dentry *old_parent = NULL;
 
 	/*
 	 * for regular files, if its inode is already on disk, we don't
@@ -2910,10 +2911,13 @@ static noinline int check_parent_dirs_for_sync(struct btrfs_trans_handle *trans,
 		if (IS_ROOT(parent))
 			break;
 
-		parent = parent->d_parent;
+		parent = dget_parent(parent);
+		dput(old_parent);
+		old_parent = parent;
 		inode = parent->d_inode;
 
 	}
+	dput(old_parent);
 out:
 	return ret;
 }
@@ -2945,6 +2949,7 @@ int btrfs_log_inode_parent(struct btrfs_trans_handle *trans,
 {
 	int inode_only = exists_only ? LOG_INODE_EXISTS : LOG_INODE_ALL;
 	struct super_block *sb;
+	struct dentry *old_parent = NULL;
 	int ret = 0;
 	u64 last_committed = root->fs_info->last_trans_committed;
 
@@ -3016,10 +3021,13 @@ int btrfs_log_inode_parent(struct btrfs_trans_handle *trans,
 		if (IS_ROOT(parent))
 			break;
 
-		parent = parent->d_parent;
+		parent = dget_parent(parent);
+		dput(old_parent);
+		old_parent = parent;
 	}
 	ret = 0;
 end_trans:
+	dput(old_parent);
 	if (ret < 0) {
 		BUG_ON(ret != -ENOSPC);
 		root->fs_info->last_trans_log_full_commit = trans->transid;
@@ -3039,8 +3047,13 @@ end_no_trans:
 int btrfs_log_dentry_safe(struct btrfs_trans_handle *trans,
 			  struct btrfs_root *root, struct dentry *dentry)
 {
-	return btrfs_log_inode_parent(trans, root, dentry->d_inode,
-				      dentry->d_parent, 0);
+	struct dentry *parent = dget_parent(dentry);
+	int ret;
+
+	ret = btrfs_log_inode_parent(trans, root, dentry->d_inode, parent, 0);
+	dput(parent);
+
+	return ret;
 }
 
 /*

From 495e86779f4f319828bc10dfc0c9ac2161868077 Mon Sep 17 00:00:00 2001
From: Josef Bacik <josef@redhat.com>
Date: Fri, 19 Nov 2010 20:36:10 +0000
Subject: [PATCH 0834/1066] Btrfs: hold i_mutex when calling
 btrfs_log_dentry_safe

Since we walk up the path logging all of the parts of the inode's path, we need
to hold i_mutex to make sure that the inode is not renamed while we're logging
everything.  btrfs_log_dentry_safe does dget_parent and all of that jazz, but we
may get unexpected results if the rename changes the inode's location while
we're higher up the path logging those dentries, so do this for safety reasons.
Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/file.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index e354c33df082..c1faded5fca0 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1047,8 +1047,14 @@ out:
 
 		if ((file->f_flags & O_DSYNC) || IS_SYNC(inode)) {
 			trans = btrfs_start_transaction(root, 0);
+			if (IS_ERR(trans)) {
+				num_written = PTR_ERR(trans);
+				goto done;
+			}
+			mutex_lock(&inode->i_mutex);
 			ret = btrfs_log_dentry_safe(trans, root,
 						    file->f_dentry);
+			mutex_unlock(&inode->i_mutex);
 			if (ret == 0) {
 				ret = btrfs_sync_log(trans, root);
 				if (ret == 0)
@@ -1067,6 +1073,7 @@ out:
 			     (start_pos + num_written - 1) >> PAGE_CACHE_SHIFT);
 		}
 	}
+done:
 	current->backing_dev_info = NULL;
 	return num_written ? num_written : err;
 }

From a1b075d28da563c5e2325577f282c042494254ba Mon Sep 17 00:00:00 2001
From: Josef Bacik <josef@redhat.com>
Date: Fri, 19 Nov 2010 20:36:11 +0000
Subject: [PATCH 0835/1066] Btrfs: make btrfs_add_nondir take parent inode as
 an argument

Everybody who calls btrfs_add_nondir just passes in the dentry of the new file
and then dereference dentry->d_parent->d_inode, but everybody who calls
btrfs_add_nondir() are already passed the parent's inode.  So instead of
dereferencing dentry->d_parent, just make btrfs_add_nondir take the dir inode as
an argument and pass that along so we don't have to worry about d_parent.
Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/inode.c | 38 ++++++++++++++++----------------------
 1 file changed, 16 insertions(+), 22 deletions(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index c0faf47d0cd9..37cc1776a5d7 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -4623,12 +4623,12 @@ int btrfs_add_link(struct btrfs_trans_handle *trans,
 }
 
 static int btrfs_add_nondir(struct btrfs_trans_handle *trans,
-			    struct dentry *dentry, struct inode *inode,
-			    int backref, u64 index)
+			    struct inode *dir, struct dentry *dentry,
+			    struct inode *inode, int backref, u64 index)
 {
-	int err = btrfs_add_link(trans, dentry->d_parent->d_inode,
-				 inode, dentry->d_name.name,
-				 dentry->d_name.len, backref, index);
+	int err = btrfs_add_link(trans, dir, inode,
+				 dentry->d_name.name, dentry->d_name.len,
+				 backref, index);
 	if (!err) {
 		d_instantiate(dentry, inode);
 		return 0;
@@ -4669,8 +4669,7 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry,
 	btrfs_set_trans_block_group(trans, dir);
 
 	inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
-				dentry->d_name.len,
-				dentry->d_parent->d_inode->i_ino, objectid,
+				dentry->d_name.len, dir->i_ino, objectid,
 				BTRFS_I(dir)->block_group, mode, &index);
 	err = PTR_ERR(inode);
 	if (IS_ERR(inode))
@@ -4683,7 +4682,7 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry,
 	}
 
 	btrfs_set_trans_block_group(trans, inode);
-	err = btrfs_add_nondir(trans, dentry, inode, 0, index);
+	err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index);
 	if (err)
 		drop_inode = 1;
 	else {
@@ -4731,10 +4730,8 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry,
 	btrfs_set_trans_block_group(trans, dir);
 
 	inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
-				dentry->d_name.len,
-				dentry->d_parent->d_inode->i_ino,
-				objectid, BTRFS_I(dir)->block_group, mode,
-				&index);
+				dentry->d_name.len, dir->i_ino, objectid,
+				BTRFS_I(dir)->block_group, mode, &index);
 	err = PTR_ERR(inode);
 	if (IS_ERR(inode))
 		goto out_unlock;
@@ -4746,7 +4743,7 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry,
 	}
 
 	btrfs_set_trans_block_group(trans, inode);
-	err = btrfs_add_nondir(trans, dentry, inode, 0, index);
+	err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index);
 	if (err)
 		drop_inode = 1;
 	else {
@@ -4806,7 +4803,7 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir,
 	btrfs_set_trans_block_group(trans, dir);
 	atomic_inc(&inode->i_count);
 
-	err = btrfs_add_nondir(trans, dentry, inode, 1, index);
+	err = btrfs_add_nondir(trans, dir, dentry, inode, 1, index);
 
 	if (err) {
 		drop_inode = 1;
@@ -4856,8 +4853,7 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	btrfs_set_trans_block_group(trans, dir);
 
 	inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
-				dentry->d_name.len,
-				dentry->d_parent->d_inode->i_ino, objectid,
+				dentry->d_name.len, dir->i_ino, objectid,
 				BTRFS_I(dir)->block_group, S_IFDIR | mode,
 				&index);
 	if (IS_ERR(inode)) {
@@ -4880,9 +4876,8 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	if (err)
 		goto out_fail;
 
-	err = btrfs_add_link(trans, dentry->d_parent->d_inode,
-				 inode, dentry->d_name.name,
-				 dentry->d_name.len, 0, index);
+	err = btrfs_add_link(trans, dir, inode, dentry->d_name.name,
+			     dentry->d_name.len, 0, index);
 	if (err)
 		goto out_fail;
 
@@ -6922,8 +6917,7 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry,
 	btrfs_set_trans_block_group(trans, dir);
 
 	inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
-				dentry->d_name.len,
-				dentry->d_parent->d_inode->i_ino, objectid,
+				dentry->d_name.len, dir->i_ino, objectid,
 				BTRFS_I(dir)->block_group, S_IFLNK|S_IRWXUGO,
 				&index);
 	err = PTR_ERR(inode);
@@ -6937,7 +6931,7 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry,
 	}
 
 	btrfs_set_trans_block_group(trans, inode);
-	err = btrfs_add_nondir(trans, dentry, inode, 0, index);
+	err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index);
 	if (err)
 		drop_inode = 1;
 	else {

From 45f49bce99d008d6864a20324548f35936ba46fb Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Sun, 21 Nov 2010 22:27:44 -0500
Subject: [PATCH 0836/1066] Btrfs: avoid NULL pointer deref in
 try_release_extent_buffer

If we fail to find a pointer in the radix tree, don't try
to deref the NULL one we do have.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/extent_io.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index f60aa3c35c23..143d3f541d64 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -3837,8 +3837,10 @@ int try_release_extent_buffer(struct extent_io_tree *tree, struct page *page)
 
 	spin_lock(&tree->buffer_lock);
 	eb = radix_tree_lookup(&tree->buffer, start >> PAGE_CACHE_SHIFT);
-	if (!eb)
-		goto out;
+	if (!eb) {
+		spin_unlock(&tree->buffer_lock);
+		return ret;
+	}
 
 	if (test_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)) {
 		ret = 0;

From 0613a59456980161d0cd468bae6c63d772743102 Mon Sep 17 00:00:00 2001
From: Daniel T Chen <crimsun@ubuntu.com>
Date: Mon, 1 Nov 2010 01:14:51 -0400
Subject: [PATCH 0837/1066] ALSA: ac97: Apply quirk for Dell Latitude D610
 binding Master and Headphone controls

BugLink: https://launchpad.net/bugs/669279

The original reporter states: "The Master mixer does not change the
volume from the headphone output (which is affected by the headphone
mixer). Instead it only seems to control the on-board speaker volume.
This confuses PulseAudio greatly as the Master channel is merged into
the volume mix."

Fix this symptom by applying the hp_only quirk for the reporter's SSID.
The fix is applicable to all stable kernels.

Reported-and-tested-by: Ben Gamari <bgamari@gmail.com>
Cc: <stable@kernel.org> [2.6.32+]
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/intel8x0.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 400f9ebd243e..629a5494347a 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -1864,6 +1864,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = {
 		.name = "Dell Inspiron 8600",	/* STAC9750/51 */
 		.type = AC97_TUNE_HP_ONLY
 	},
+	{
+		.subvendor = 0x1028,
+		.subdevice = 0x0182,
+		.name = "Dell Latitude D610",	/* STAC9750/51 */
+		.type = AC97_TUNE_HP_ONLY
+	},
 	{
 		.subvendor = 0x1028,
 		.subdevice = 0x0186,

From 2fb50f135adba59edf2359effcce83eb17025793 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Fri, 12 Nov 2010 13:38:04 -0800
Subject: [PATCH 0838/1066] ALSA: sound/ppc: Use printf extension %pR for
 struct resource

Using %pR standardizes the struct resource output.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/ppc/pmac.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index 85081172403f..b47cfd45b3b9 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -1228,10 +1228,8 @@ int __devinit snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
 					       chip->rsrc[i].start + 1,
 					       rnames[i]) == NULL) {
 				printk(KERN_ERR "snd: can't request rsrc "
-				       " %d (%s: 0x%016llx:%016llx)\n",
-				       i, rnames[i],
-				       (unsigned long long)chip->rsrc[i].start,
-				       (unsigned long long)chip->rsrc[i].end);
+				       " %d (%s: %pR)\n",
+				       i, rnames[i], &chip->rsrc[i]);
 				err = -ENODEV;
 				goto __error;
 			}
@@ -1256,10 +1254,8 @@ int __devinit snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
 					       chip->rsrc[i].start + 1,
 					       rnames[i]) == NULL) {
 				printk(KERN_ERR "snd: can't request rsrc "
-				       " %d (%s: 0x%016llx:%016llx)\n",
-				       i, rnames[i],
-				       (unsigned long long)chip->rsrc[i].start,
-				       (unsigned long long)chip->rsrc[i].end);
+				       " %d (%s: %pR)\n",
+				       i, rnames[i], &chip->rsrc[i]);
 				err = -ENODEV;
 				goto __error;
 			}

From c80c1d542744dd7851cc8da748c6ada99680fb4d Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sun, 14 Nov 2010 19:05:02 -0800
Subject: [PATCH 0839/1066] ALSA: sound/core/pcm_lib.c: Remove unnecessary
 semicolons

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/core/pcm_lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index a1707cca9c66..b75db8e9cc0f 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -223,7 +223,7 @@ static void xrun_log(struct snd_pcm_substream *substream,
 	entry->jiffies = jiffies;
 	entry->pos = pos;
 	entry->period_size = runtime->period_size;
-	entry->buffer_size = runtime->buffer_size;;
+	entry->buffer_size = runtime->buffer_size;
 	entry->old_hw_ptr = runtime->status->hw_ptr;
 	entry->hw_ptr_base = runtime->hw_ptr_base;
 	log->idx = (log->idx + 1) % XRUN_LOG_CNT;

From 5dbea6b1f2113f764999b39fd3d79b1354c193d9 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 15 Nov 2010 12:14:02 -0800
Subject: [PATCH 0840/1066] ALSA: sound/pci/asihpi/hpioctl.c: Remove
 unnecessary casts of pci_get_drvdata

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/asihpi/hpioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/asihpi/hpioctl.c b/sound/pci/asihpi/hpioctl.c
index 62895a719fcb..22dbd91811a4 100644
--- a/sound/pci/asihpi/hpioctl.c
+++ b/sound/pci/asihpi/hpioctl.c
@@ -435,7 +435,7 @@ void __devexit asihpi_adapter_remove(struct pci_dev *pci_dev)
 	struct hpi_message hm;
 	struct hpi_response hr;
 	struct hpi_adapter *pa;
-	pa = (struct hpi_adapter *)pci_get_drvdata(pci_dev);
+	pa = pci_get_drvdata(pci_dev);
 
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_SUBSYSTEM,
 		HPI_SUBSYS_DELETE_ADAPTER);

From a0e90acc657990511c83bc69965bfd3c63386d45 Mon Sep 17 00:00:00 2001
From: Daniel T Chen <crimsun@ubuntu.com>
Date: Sat, 20 Nov 2010 10:20:35 -0500
Subject: [PATCH 0841/1066] ALSA: hda: Add Samsung R720 SSID for subwoofer pin
 fixup

BugLink: https://launchpad.net/bugs/677830

The original reporter states that the subwoofer does not mute when
inserting headphones.  We need an entry for his machine's SSID in the
subwoofer pin fixup list, so add it there (verified using hda_analyzer).

Reported-and-tested-by: i-NoD
Cc: <stable@kernel.org>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 5f00589cb791..1a7703a49655 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -19298,6 +19298,7 @@ static const struct alc_fixup alc662_fixups[] = {
 
 static struct snd_pci_quirk alc662_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE),
+	SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
 	{}

From 78ac07b0d2b09b1ccb7a41a2e25f71d60b652920 Mon Sep 17 00:00:00 2001
From: Andreas Mohr <andi@lisas.de>
Date: Sun, 21 Nov 2010 12:09:32 +0100
Subject: [PATCH 0842/1066] ALSA: azt3328: period bug fix (for PA), add missing
 ACK on stop timer

. Fix PulseAudio "ALSA driver bug" issue
  (if we have two alternated areas within a 64k DMA buffer, then max
  period size should obviously be 32k only).
  Back references:
   http://pulseaudio.org/wiki/AlsaIssues
   http://fedoraproject.org/wiki/Features/GlitchFreeAudio
. In stop timer function, need to supply ACK in the timer control byte.
. Minor log output correction

When I did my first PA testing recently, the period size bug resulted
in quite precisely observeable half-period-based playback distortion.

PA-based operation is quite a bit more underrun-prone (despite its
zero-copy optimizations etc.) than raw ALSA with this rather spartan
sound hardware implementation on my puny Athlon.

Note that even with this patch, azt3328 still doesn't work for both
cases yet, PA tsched=0 and tsched
(on tsched=0 it will playback tiny fragments of periods, leading to tiny
stuttering sounds with some pauses in between, whereas with
timer-scheduled operation playback works fine - minus some quite increased
underrun trouble on PA vs. ALSA, that is).

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/azt3328.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index 4679ed83a43b..2f3cacbd5528 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -1129,10 +1129,11 @@ snd_azf3328_codec_setdmaa(struct snd_azf3328 *chip,
 
 		count_areas = size/2;
 		addr_area2 = addr+count_areas;
-		count_areas--; /* max. index */
 		snd_azf3328_dbgcodec("setdma: buffers %08lx[%u] / %08lx[%u]\n",
 				addr, count_areas, addr_area2, count_areas);
 
+		count_areas--; /* max. index */
+
 		/* build combined I/O buffer length word */
 		lengths = (count_areas << 16) | (count_areas);
 		spin_lock_irqsave(&chip->reg_lock, flags);
@@ -1740,11 +1741,15 @@ static const struct snd_pcm_hardware snd_azf3328_hardware =
 	.rate_max =		AZF_FREQ_66200,
 	.channels_min =		1,
 	.channels_max =		2,
-	.buffer_bytes_max =	65536,
-	.period_bytes_min =	64,
-	.period_bytes_max =	65536,
-	.periods_min =		1,
-	.periods_max =		1024,
+	.buffer_bytes_max =	(64*1024),
+	.period_bytes_min =	1024,
+	.period_bytes_max =	(32*1024),
+	/* We simply have two DMA areas (instead of a list of descriptors
+	   such as other cards); I believe that this is a fixed hardware
+	   attribute and there isn't much driver magic to be done to expand it.
+	   Thus indicate that we have at least and at most 2 periods. */
+	.periods_min =		2,
+	.periods_max =		2,
 	/* FIXME: maybe that card actually has a FIFO?
 	 * Hmm, it seems newer revisions do have one, but we still don't know
 	 * its size... */
@@ -1980,8 +1985,13 @@ snd_azf3328_timer_stop(struct snd_timer *timer)
 	chip = snd_timer_chip(timer);
 	spin_lock_irqsave(&chip->reg_lock, flags);
 	/* disable timer countdown and interrupt */
-	/* FIXME: should we write TIMER_IRQ_ACK here? */
-	snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0);
+	/* Hmm, should we write TIMER_IRQ_ACK here?
+	   YES indeed, otherwise a rogue timer operation - which prompts
+	   ALSA(?) to call repeated stop() in vain, but NOT start() -
+	   will never end (value 0x03 is kept shown in control byte).
+	   Simply manually poking 0x04 _once_ immediately successfully stops
+	   the hardware/ALSA interrupt activity. */
+	snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x04);
 	spin_unlock_irqrestore(&chip->reg_lock, flags);
 	snd_azf3328_dbgcallleave();
 	return 0;

From c0763e687d0283d0db507813ca4462aa4073c5b5 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segoon@openwall.com>
Date: Sun, 21 Nov 2010 20:40:07 +0300
Subject: [PATCH 0843/1066] ALSA: snd-atmel-abdac: test wrong variable

After clk_get() pclk is checked second time instead of sample_clk check.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/atmel/abdac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c
index f2f41c854221..4e47baada66f 100644
--- a/sound/atmel/abdac.c
+++ b/sound/atmel/abdac.c
@@ -420,7 +420,7 @@ static int __devinit atmel_abdac_probe(struct platform_device *pdev)
 		return PTR_ERR(pclk);
 	}
 	sample_clk = clk_get(&pdev->dev, "sample_clk");
-	if (IS_ERR(pclk)) {
+	if (IS_ERR(sample_clk)) {
 		dev_dbg(&pdev->dev, "no sample clock\n");
 		retval = PTR_ERR(pclk);
 		goto out_put_pclk;

From 673f7a8984c3a9e2cb1108ce221da1ebbd9e5d09 Mon Sep 17 00:00:00 2001
From: Daniel T Chen <crimsun@ubuntu.com>
Date: Sun, 21 Nov 2010 14:01:14 -0500
Subject: [PATCH 0844/1066] ALSA: hda: Use hp-laptop quirk to enable headphones
 automute for Asus A52J

BugLink: https://launchpad.net/bugs/677652

The original reporter states that, in 2.6.35, headphones do not appear
to work, nor does inserting them mute the A52J's onboard speakers.  Upon
inspecting the codec dump, it appears that the newly committed hp-laptop
quirk will suffice to enable this basic functionality.  Testing was done
with an alsa-driver build from 2010-11-21.

Reported-and-tested-by: Joan Creus
Cc: <stable@kernel.org> [2.6.35+]
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_conexant.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 6361f752b5f3..3cfb31e77b16 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3100,6 +3100,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTRO),
 	SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x103c, 0x360b, "HP G60", CXT5066_HP_LAPTOP),
+	SND_PCI_QUIRK(0x1043, 0x13f3, "Asus A52J", CXT5066_HP_LAPTOP),
 	SND_PCI_QUIRK(0x1179, 0xff1e, "Toshiba Satellite C650D", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5),
 	SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5),

From 1beded5d9ce90256e4a7e7b0e96c317eafe1c513 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Mon, 22 Nov 2010 08:58:13 +0100
Subject: [PATCH 0845/1066] ALSA: atmel - Fix the return value in error path

In the commit c0763e687d0283d0db507813ca4462aa4073c5b5
    ALSA: snd-atmel-abdac: test wrong variable
the return value via PTR_ERR() had to be fixed as well.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/atmel/abdac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c
index 4e47baada66f..6e2409181895 100644
--- a/sound/atmel/abdac.c
+++ b/sound/atmel/abdac.c
@@ -422,7 +422,7 @@ static int __devinit atmel_abdac_probe(struct platform_device *pdev)
 	sample_clk = clk_get(&pdev->dev, "sample_clk");
 	if (IS_ERR(sample_clk)) {
 		dev_dbg(&pdev->dev, "no sample clock\n");
-		retval = PTR_ERR(pclk);
+		retval = PTR_ERR(sample_clk);
 		goto out_put_pclk;
 	}
 	clk_enable(pclk);

From 01e0f1378c47947b825eac05c98697ab1be1c86f Mon Sep 17 00:00:00 2001
From: Kailang Yang <kailang@realtek.com>
Date: Mon, 22 Nov 2010 10:59:36 +0100
Subject: [PATCH 0846/1066] ALSA: hda - Fixed ALC887-VD initial error

ALC887-VD is like ALC888-VD. It can not be initialized as ALC882.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 1a7703a49655..564e6c136ddd 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -19420,7 +19420,10 @@ static int patch_alc888(struct hda_codec *codec)
 {
 	if ((alc_read_coef_idx(codec, 0) & 0x00f0)==0x0030){
 		kfree(codec->chip_name);
-		codec->chip_name = kstrdup("ALC888-VD", GFP_KERNEL);
+		if (codec->vendor_id == 0x10ec0887)
+			codec->chip_name = kstrdup("ALC887-VD", GFP_KERNEL);
+		else
+			codec->chip_name = kstrdup("ALC888-VD", GFP_KERNEL);
 		if (!codec->chip_name) {
 			alc_free(codec);
 			return -ENOMEM;
@@ -19910,7 +19913,7 @@ static struct hda_codec_preset snd_hda_preset_realtek[] = {
 	{ .id = 0x10ec0885, .rev = 0x100103, .name = "ALC889A",
 	  .patch = patch_alc882 },
 	{ .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 },
-	{ .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc882 },
+	{ .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc888 },
 	{ .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200",
 	  .patch = patch_alc882 },
 	{ .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc888 },

From b0c4d4ee4e4f13fa3f017c00319a18c1ea31b7d7 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 22 Nov 2010 12:00:59 +0000
Subject: [PATCH 0847/1066] ARM: avoid marking decompressor .stack section as
 having contents

The .stack section doesn't contain any contents, and doesn't require
initialization either.  Rather than marking the output section with
'NOLOAD' but still having it exist in the object files, mark it with
%nobits which avoids the assembler marking the section with 'CONTENTS'.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/boot/compressed/head.S         | 2 +-
 arch/arm/boot/compressed/vmlinux.lds.in | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 6825c34646d4..9be21ba648cd 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -1084,6 +1084,6 @@ memdump:	mov	r12, r0
 reloc_end:
 
 		.align
-		.section ".stack", "w"
+		.section ".stack", "aw", %nobits
 user_stack:	.space	4096
 user_stack_end:
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index d08168941bd6..366a924019ac 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -57,7 +57,7 @@ SECTIONS
   .bss			: { *(.bss) }
   _end = .;
 
-  .stack (NOLOAD)	: { *(.stack) }
+  .stack		: { *(.stack) }
 
   .stab 0		: { *(.stab) }
   .stabstr 0		: { *(.stabstr) }

From 8575d93386d6ce9a3d4961134018d4e6c6bed618 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segoon@openwall.com>
Date: Sun, 21 Nov 2010 20:40:21 +0300
Subject: [PATCH 0848/1066] ASoC: s3c24xx: test wrong variable

After clk_get() mclk is checked three times instead of mout_epll
and sclk_spdif checks.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/s3c24xx/smdk_spdif.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/s3c24xx/smdk_spdif.c b/sound/soc/s3c24xx/smdk_spdif.c
index f31d22ad7c88..c8bd90488a87 100644
--- a/sound/soc/s3c24xx/smdk_spdif.c
+++ b/sound/soc/s3c24xx/smdk_spdif.c
@@ -38,7 +38,7 @@ static int set_audio_clock_heirachy(struct platform_device *pdev)
 	}
 
 	mout_epll = clk_get(NULL, "mout_epll");
-	if (IS_ERR(fout_epll)) {
+	if (IS_ERR(mout_epll)) {
 		printk(KERN_WARNING "%s: Cannot find mout_epll.\n",
 				__func__);
 		ret = -EINVAL;
@@ -54,7 +54,7 @@ static int set_audio_clock_heirachy(struct platform_device *pdev)
 	}
 
 	sclk_spdif = clk_get(NULL, "sclk_spdif");
-	if (IS_ERR(fout_epll)) {
+	if (IS_ERR(sclk_spdif)) {
 		printk(KERN_WARNING "%s: Cannot find sclk_spdif.\n",
 				__func__);
 		ret = -EINVAL;

From 13a2e06c5898d27aadabfdb9830169101b21432f Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Mon, 22 Nov 2010 08:20:54 +0800
Subject: [PATCH 0849/1066] ASoC: stac9766 - set reg_cache_default to
 stac9766_reg

Looks like this is missing during multi-component conversion.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/stac9766.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/stac9766.c b/sound/soc/codecs/stac9766.c
index 00d67cc8e206..061f9e5a497b 100644
--- a/sound/soc/codecs/stac9766.c
+++ b/sound/soc/codecs/stac9766.c
@@ -383,6 +383,7 @@ static struct snd_soc_codec_driver soc_codec_dev_stac9766 = {
 	.reg_cache_size = sizeof(stac9766_reg),
 	.reg_word_size = sizeof(u16),
 	.reg_cache_step = 2,
+	.reg_cache_default = stac9766_reg,
 };
 
 static __devinit int stac9766_probe(struct platform_device *pdev)

From f570e1dd8469d39420f406a4f5442c270b1e759e Mon Sep 17 00:00:00 2001
From: Tracey Dent <tdent48227@gmail.com>
Date: Sun, 7 Nov 2010 09:43:33 -0500
Subject: [PATCH 0850/1066] EDAC: Remove deprecated kbuild goal definitions

Change EDAC's Makefile to use <modules>-y instead of
<modules>-objs because -objs is deprecated and not mentioned in
Documentation/kbuild/makefiles.txt.

 [bp: Fixup commit message]
 [bp: Fixup indentation]

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 drivers/edac/Makefile | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index b3781399b38a..ba2898b3639b 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -10,16 +10,16 @@ obj-$(CONFIG_EDAC)			:= edac_stub.o
 obj-$(CONFIG_EDAC_MM_EDAC)		+= edac_core.o
 obj-$(CONFIG_EDAC_MCE)			+= edac_mce.o
 
-edac_core-objs	:= edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
-edac_core-objs	+= edac_module.o edac_device_sysfs.o
+edac_core-y	:= edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
+edac_core-y	+= edac_module.o edac_device_sysfs.o
 
 ifdef CONFIG_PCI
-edac_core-objs	+= edac_pci.o edac_pci_sysfs.o
+edac_core-y	+= edac_pci.o edac_pci_sysfs.o
 endif
 
 obj-$(CONFIG_EDAC_MCE_INJ)		+= mce_amd_inj.o
 
-edac_mce_amd-objs			:= mce_amd.o
+edac_mce_amd-y				:= mce_amd.o
 obj-$(CONFIG_EDAC_DECODE_MCE)		+= edac_mce_amd.o
 
 obj-$(CONFIG_EDAC_AMD76X)		+= amd76x_edac.o

From df4b2a30e0b9e553abfd63ee75dbbd66be80f01a Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 18 Nov 2010 22:05:43 -0500
Subject: [PATCH 0851/1066] EDAC, MCE: Fix edac_init_mce_inject error handling

Otherwise, variable i will be -1 inside the latest iteration of the
while loop.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 drivers/edac/mce_amd_inj.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/edac/mce_amd_inj.c b/drivers/edac/mce_amd_inj.c
index 8d0688f36d4c..39faded3cadd 100644
--- a/drivers/edac/mce_amd_inj.c
+++ b/drivers/edac/mce_amd_inj.c
@@ -139,7 +139,7 @@ static int __init edac_init_mce_inject(void)
 	return 0;
 
 err_sysfs_create:
-	while (i-- >= 0)
+	while (--i >= 0)
 		sysfs_remove_file(mce_kobj, &sysfs_attrs[i]->attr);
 
 	kobject_del(mce_kobj);

From 88b2a9a3d98a19496d64aadda7158c0ad51cbe7d Mon Sep 17 00:00:00 2001
From: John Fastabend <john.r.fastabend@intel.com>
Date: Mon, 15 Nov 2010 20:29:21 +0000
Subject: [PATCH 0852/1066] ipv6: fix missing in6_ifa_put in addrconf

Fix ref count bug introduced by

commit 2de795707294972f6c34bae9de713e502c431296
Author: Lorenzo Colitti <lorenzo@google.com>
Date:   Wed Oct 27 18:16:49 2010 +0000

ipv6: addrconf: don't remove address state on ifdown if the address
is being kept

Fix logic so that addrconf_ifdown() decrements the inet6_ifaddr
refcnt correctly with in6_ifa_put().

Reported-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/addrconf.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 2fc35b32df9e..23cc8e1ce8d4 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -2758,13 +2758,13 @@ static int addrconf_ifdown(struct net_device *dev, int how)
 			ifa->state = INET6_IFADDR_STATE_DEAD;
 			spin_unlock_bh(&ifa->state_lock);
 
-			if (state == INET6_IFADDR_STATE_DEAD) {
-				in6_ifa_put(ifa);
-			} else {
+			if (state != INET6_IFADDR_STATE_DEAD) {
 				__ipv6_ifa_notify(RTM_DELADDR, ifa);
 				atomic_notifier_call_chain(&inet6addr_chain,
 							   NETDEV_DOWN, ifa);
 			}
+
+			in6_ifa_put(ifa);
 			write_lock_bh(&idev->lock);
 		}
 	}

From c1a3a4b90a5a47adcca0e587f5d7e9ea61329b26 Mon Sep 17 00:00:00 2001
From: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Mon, 22 Nov 2010 14:01:55 -0200
Subject: [PATCH 0853/1066] perf record: Handle restrictive permissions in
 /proc/{kallsyms,modules}

The 59365d1 commit, even being reverted by 33e0d57, showed a non robust
behavior in 'perf record': it really should just warn the user that some
functionality will not be available.

The new behavior then becomes:

	[acme@felicio linux]$ ls -la /proc/{kallsyms,modules}
	-r-------- 1 root root 0 Nov 22 12:19 /proc/kallsyms
	-r-------- 1 root root 0 Nov 22 12:19 /proc/modules
	[acme@felicio linux]$ perf record ls -R > /dev/null
	Couldn't record kernel reference relocation symbol
	Symbol resolution may be skewed if relocation was used (e.g. kexec).
	Check /proc/kallsyms permission or run as root.
	[ perf record: Woken up 1 times to write data ]
	[ perf record: Captured and wrote 0.004 MB perf.data (~161 samples) ]
	[acme@felicio linux]$ perf report --stdio
	[kernel.kallsyms] with build id 77b05e00e64e4de1c9347d83879779b540d69f00 not found, continuing without symbols
	# Events: 98  cycles
	#
	# Overhead  Command    Shared Object                Symbol
	# ........  .......  ...............  ....................
	#
	    48.26%       ls  [kernel]         [k] ffffffff8102b92b
	    22.49%       ls  libc-2.12.90.so  [.] __strlen_sse2
	     8.35%       ls  libc-2.12.90.so  [.] __GI___strcoll_l
	     8.17%       ls  ls               [.]            11580
	     3.35%       ls  libc-2.12.90.so  [.] _IO_new_file_xsputn
	     3.33%       ls  libc-2.12.90.so  [.] _int_malloc
	     1.88%       ls  libc-2.12.90.so  [.] _int_free
	     0.84%       ls  libc-2.12.90.so  [.] malloc_consolidate
	     0.84%       ls  libc-2.12.90.so  [.] __readdir64
	     0.83%       ls  ls               [.] strlen@plt
	     0.83%       ls  libc-2.12.90.so  [.] __GI_fwrite_unlocked
	     0.83%       ls  libc-2.12.90.so  [.] __memcpy_sse2

	#
	# (For a higher level overview, try: perf report --sort comm,dso)
	#
[acme@felicio linux]$

It still has the build-ids for DSOs in the maps with hits:

[acme@felicio linux]$ perf buildid-list
77b05e00e64e4de1c9347d83879779b540d69f00 [kernel.kallsyms]
09c4a431a4a8b648fcfc2c2bdda70f56050ddff1 /bin/ls
af75ea9ad951d25e0f038901a11b3846dccb29a4 /lib64/libc-2.12.90.so
[acme@felicio linux]$

That can be used in another machine to resolve kernel symbols.

Cc: Eugene Teo <eugeneteo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jesper Juhl <jj@chaosbits.net>
Cc: Marcus Meissner <meissner@suse.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 tools/perf/builtin-record.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 93bd2ff001fb..e2c2de201eec 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -697,17 +697,18 @@ static int __cmd_record(int argc, const char **argv)
 	if (err < 0)
 		err = event__synthesize_kernel_mmap(process_synthesized_event,
 						    session, machine, "_stext");
-	if (err < 0) {
-		pr_err("Couldn't record kernel reference relocation symbol.\n");
-		return err;
-	}
+	if (err < 0)
+		pr_err("Couldn't record kernel reference relocation symbol\n"
+		       "Symbol resolution may be skewed if relocation was used (e.g. kexec).\n"
+		       "Check /proc/kallsyms permission or run as root.\n");
 
 	err = event__synthesize_modules(process_synthesized_event,
 					session, machine);
-	if (err < 0) {
-		pr_err("Couldn't record kernel reference relocation symbol.\n");
-		return err;
-	}
+	if (err < 0)
+		pr_err("Couldn't record kernel module information.\n"
+		       "Symbol resolution may be skewed if relocation was used (e.g. kexec).\n"
+		       "Check /proc/modules permission or run as root.\n");
+
 	if (perf_guest)
 		perf_session__process_machines(session, event__synthesize_guest_os);
 

From 84cf7029b63ca3eef823438a29ceb5ba139b883a Mon Sep 17 00:00:00 2001
From: Sonny Rao <sonnyrao@us.ibm.com>
Date: Thu, 18 Nov 2010 11:50:02 +0000
Subject: [PATCH 0854/1066] qlge: Fix incorrect usage of module parameters and
 netdev msg level

Driver appears to be mistaking the permission field with default value
in the case of debug and qlge_irq_type.

Driver is also passing debug as a bitmask into netif_msg_init()
which wants a number of bits.  Ron Mercer suggests we should
change this to pass in -1 so the defaults get used instead,
which makes the default much less verbose.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Sonny Rao <sonnyrao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index c30e0fe55a31..528eaef5308f 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -62,15 +62,15 @@ static const u32 default_msg =
 /* NETIF_MSG_PKTDATA | */
     NETIF_MSG_HW | NETIF_MSG_WOL | 0;
 
-static int debug = 0x00007fff;	/* defaults above */
-module_param(debug, int, 0);
+static int debug = -1;	/* defaults above */
+module_param(debug, int, 0664);
 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 
 #define MSIX_IRQ 0
 #define MSI_IRQ 1
 #define LEG_IRQ 2
 static int qlge_irq_type = MSIX_IRQ;
-module_param(qlge_irq_type, int, MSIX_IRQ);
+module_param(qlge_irq_type, int, 0664);
 MODULE_PARM_DESC(qlge_irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy.");
 
 static int qlge_mpi_coredump;

From 27d916d680e7b324087a75d080f215e7c34a4e8f Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Fri, 19 Nov 2010 11:58:52 +0000
Subject: [PATCH 0855/1066] phylib: Use common page register definition for
 Marvell PHYs.

The definition of the Marvell PHY page register is not specific to
88E1121, so rename the macro to MII_MARVELL_PHY_PAGE, and use it
throughout.

Suggested-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/marvell.c | 27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index f0bd1a1aba3a..3600b8b21bf2 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -35,6 +35,8 @@
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
+#define MII_MARVELL_PHY_PAGE		22
+
 #define MII_M1011_IEVENT		0x13
 #define MII_M1011_IEVENT_CLEAR		0x0000
 
@@ -80,7 +82,6 @@
 #define MII_88E1121_PHY_LED_CTRL	16
 #define MII_88E1121_PHY_LED_PAGE	3
 #define MII_88E1121_PHY_LED_DEF		0x0030
-#define MII_88E1121_PHY_PAGE		22
 
 #define MII_M1011_PHY_STATUS		0x11
 #define MII_M1011_PHY_STATUS_1000	0x8000
@@ -190,9 +191,9 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
 {
 	int err, oldpage, mscr;
 
-	oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
 
-	err = phy_write(phydev, MII_88E1121_PHY_PAGE,
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
 			MII_88E1121_PHY_MSCR_PAGE);
 	if (err < 0)
 		return err;
@@ -218,7 +219,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
 			return err;
 	}
 
-	phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
 
 	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 	if (err < 0)
@@ -229,11 +230,11 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
 
-	phy_write(phydev, MII_88E1121_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
 	phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF);
-	phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
 
 	err = genphy_config_aneg(phydev);
 
@@ -244,9 +245,9 @@ static int m88e1318_config_aneg(struct phy_device *phydev)
 {
 	int err, oldpage, mscr;
 
-	oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
 
-	err = phy_write(phydev, MII_88E1121_PHY_PAGE,
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
 			MII_88E1121_PHY_MSCR_PAGE);
 	if (err < 0)
 		return err;
@@ -258,7 +259,7 @@ static int m88e1318_config_aneg(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	err = phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
 	if (err < 0)
 		return err;
 
@@ -398,7 +399,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
 	int err;
 
 	/* Change address */
-	err = phy_write(phydev, 0x16, 0x0002);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
 	if (err < 0)
 		return err;
 
@@ -408,7 +409,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
 		return err;
 
 	/* Change address */
-	err = phy_write(phydev, 0x16, 0x0003);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0003);
 	if (err < 0)
 		return err;
 
@@ -421,7 +422,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
 		return err;
 
 	/* Reset address */
-	err = phy_write(phydev, 0x16, 0x0);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
 	if (err < 0)
 		return err;
 

From 90600732d8b2fbc422bc9c57bdc73513d909367f Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Fri, 19 Nov 2010 11:58:53 +0000
Subject: [PATCH 0856/1066] phylib: Add support for Marvell 88E1149R devices.

The 88E1149R is 10/100/1000 quad-gigabit Ethernet PHY.  The
.config_aneg function can be shared with 88E1118, but it needs its own
.config_init.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/marvell.c   | 40 +++++++++++++++++++++++++++++++++++++
 include/linux/marvell_phy.h |  1 +
 2 files changed, 41 insertions(+)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 3600b8b21bf2..def19d7c53ef 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -433,6 +433,32 @@ static int m88e1118_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int m88e1149_config_init(struct phy_device *phydev)
+{
+	int err;
+
+	/* Change address */
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
+	if (err < 0)
+		return err;
+
+	/* Enable 1000 Mbit */
+	err = phy_write(phydev, 0x15, 0x1048);
+	if (err < 0)
+		return err;
+
+	/* Reset address */
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
 static int m88e1145_config_init(struct phy_device *phydev)
 {
 	int err;
@@ -685,6 +711,19 @@ static struct phy_driver marvell_drivers[] = {
 		.config_intr = &marvell_config_intr,
 		.driver = { .owner = THIS_MODULE },
 	},
+	{
+		.phy_id = MARVELL_PHY_ID_88E1149R,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
+		.name = "Marvell 88E1149R",
+		.features = PHY_GBIT_FEATURES,
+		.flags = PHY_HAS_INTERRUPT,
+		.config_init = &m88e1149_config_init,
+		.config_aneg = &m88e1118_config_aneg,
+		.read_status = &genphy_read_status,
+		.ack_interrupt = &marvell_ack_interrupt,
+		.config_intr = &marvell_config_intr,
+		.driver = { .owner = THIS_MODULE },
+	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1240,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
@@ -736,6 +775,7 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = {
 	{ 0x01410e10, 0xfffffff0 },
 	{ 0x01410cb0, 0xfffffff0 },
 	{ 0x01410cd0, 0xfffffff0 },
+	{ 0x01410e50, 0xfffffff0 },
 	{ 0x01410e30, 0xfffffff0 },
 	{ 0x01410e90, 0xfffffff0 },
 	{ }
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index 1ff81b51b656..dd3c34ebca9a 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -11,6 +11,7 @@
 #define MARVELL_PHY_ID_88E1118		0x01410e10
 #define MARVELL_PHY_ID_88E1121R		0x01410cb0
 #define MARVELL_PHY_ID_88E1145		0x01410cd0
+#define MARVELL_PHY_ID_88E1149R		0x01410e50
 #define MARVELL_PHY_ID_88E1240		0x01410e30
 #define MARVELL_PHY_ID_88E1318S		0x01410e90
 

From cf41a51db89850033efc11c18a5257de810b5417 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Fri, 19 Nov 2010 12:13:18 +0000
Subject: [PATCH 0857/1066] of/phylib: Use device tree properties to initialize
 Marvell PHYs.

Some aspects of PHY initialization are board dependent, things like
indicator LED connections and some clocking modes cannot be determined
by probing.  The dev_flags element of struct phy_device can be used to
control these things if an appropriate value can be passed from the
Ethernet driver.  We run into problems however if the PHY connections
are specified by the device tree.  There is no way for the Ethernet
driver to know what flags it should pass.

If we are using the device tree, the struct phy_device will be
populated with the device tree node corresponding to the PHY, and we
can extract extra configuration information from there.

The next question is what should the format of that information be?
It is highly device specific, and the device tree representation
should not be tied to any arbitrary kernel defined constants.  A
straight forward representation is just to specify the exact bits that
should be set using the "marvell,reg-init" property:

      phy5: ethernet-phy@5 {
        reg = <5>;
        compatible = "marvell,88e1149r";
        marvell,reg-init =
                /* led[0]:1000, led[1]:100, led[2]:10, led[3]:tx */
                <3 0x10 0 0x5777>, /* Reg 3,16 <- 0x5777 */
                /* mix %:0, led[0123]:drive low off hiZ */
                <3 0x11 0 0x00aa>, /* Reg 3,17 <- 0x00aa */
                /* default blink periods. */
                <3 0x12 0 0x4105>, /* Reg 3,18 <- 0x4105 */
                /* led[4]:rx, led[5]:dplx, led[45]:drive low off hiZ */
                <3 0x13 0 0x0a60>; /* Reg 3,19 <- 0x0a60 */
      };

      phy6: ethernet-phy@6 {
        reg = <6>;
        compatible = "marvell,88e1118";
        marvell,reg-init =
                /* Fix rx and tx clock transition timing */
                <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
                /* Adjust LED drive. */
                <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
                /* irq, blink-activity, blink-link */
                <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
      };

The Marvell PHYs have a page select register at register 22 (0x16), we
can specify any register by its page and register number.  These are
the first and second word.  The third word contains a mask to be ANDed
with the existing register value, and the fourth word is ORed with the
result to yield the new register value.  The new marvell_of_reg_init
function leaves the page select register unchanged, so a call to it
can be dropped into the .config_init functions without unduly
affecting the state of the PHY.

If CONFIG_OF_MDIO is not set, there is no of_node, or no
"marvell,reg-init" property, the PHY initialization is unchanged.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/marvell.c | 97 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index def19d7c53ef..e8b9c53c304b 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -30,6 +30,7 @@
 #include <linux/ethtool.h>
 #include <linux/phy.h>
 #include <linux/marvell_phy.h>
+#include <linux/of.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -187,6 +188,87 @@ static int marvell_config_aneg(struct phy_device *phydev)
 	return 0;
 }
 
+#ifdef CONFIG_OF_MDIO
+/*
+ * Set and/or override some configuration registers based on the
+ * marvell,reg-init property stored in the of_node for the phydev.
+ *
+ * marvell,reg-init = <reg-page reg mask value>,...;
+ *
+ * There may be one or more sets of <reg-page reg mask value>:
+ *
+ * reg-page: which register bank to use.
+ * reg: the register.
+ * mask: if non-zero, ANDed with existing register value.
+ * value: ORed with the masked value and written to the regiser.
+ *
+ */
+static int marvell_of_reg_init(struct phy_device *phydev)
+{
+	const __be32 *paddr;
+	int len, i, saved_page, current_page, page_changed, ret;
+
+	if (!phydev->dev.of_node)
+		return 0;
+
+	paddr = of_get_property(phydev->dev.of_node, "marvell,reg-init", &len);
+	if (!paddr || len < (4 * sizeof(*paddr)))
+		return 0;
+
+	saved_page = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+	if (saved_page < 0)
+		return saved_page;
+	page_changed = 0;
+	current_page = saved_page;
+
+	ret = 0;
+	len /= sizeof(*paddr);
+	for (i = 0; i < len - 3; i += 4) {
+		u16 reg_page = be32_to_cpup(paddr + i);
+		u16 reg = be32_to_cpup(paddr + i + 1);
+		u16 mask = be32_to_cpup(paddr + i + 2);
+		u16 val_bits = be32_to_cpup(paddr + i + 3);
+		int val;
+
+		if (reg_page != current_page) {
+			current_page = reg_page;
+			page_changed = 1;
+			ret = phy_write(phydev, MII_MARVELL_PHY_PAGE, reg_page);
+			if (ret < 0)
+				goto err;
+		}
+
+		val = 0;
+		if (mask) {
+			val = phy_read(phydev, reg);
+			if (val < 0) {
+				ret = val;
+				goto err;
+			}
+			val &= mask;
+		}
+		val |= val_bits;
+
+		ret = phy_write(phydev, reg, val);
+		if (ret < 0)
+			goto err;
+
+	}
+err:
+	if (page_changed) {
+		i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page);
+		if (ret == 0)
+			ret = i;
+	}
+	return ret;
+}
+#else
+static int marvell_of_reg_init(struct phy_device *phydev)
+{
+	return 0;
+}
+#endif /* CONFIG_OF_MDIO */
+
 static int m88e1121_config_aneg(struct phy_device *phydev)
 {
 	int err, oldpage, mscr;
@@ -369,6 +451,9 @@ static int m88e1111_config_init(struct phy_device *phydev)
 			return err;
 	}
 
+	err = marvell_of_reg_init(phydev);
+	if (err < 0)
+		return err;
 
 	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 	if (err < 0)
@@ -421,6 +506,10 @@ static int m88e1118_config_init(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
+	err = marvell_of_reg_init(phydev);
+	if (err < 0)
+		return err;
+
 	/* Reset address */
 	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
 	if (err < 0)
@@ -447,6 +536,10 @@ static int m88e1149_config_init(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
+	err = marvell_of_reg_init(phydev);
+	if (err < 0)
+		return err;
+
 	/* Reset address */
 	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
 	if (err < 0)
@@ -518,6 +611,10 @@ static int m88e1145_config_init(struct phy_device *phydev)
 		}
 	}
 
+	err = marvell_of_reg_init(phydev);
+	if (err < 0)
+		return err;
+
 	return 0;
 }
 

From 5fc43978a79e8021c189660ab63249fd29c5fb32 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Sat, 20 Nov 2010 11:13:31 -0500
Subject: [PATCH 0858/1066] SUNRPC: Fix an infinite loop in
 call_refresh/call_refreshresult

If the rpcauth_refreshcred() call returns an error other than
EACCES, ENOMEM or ETIMEDOUT, we currently end up looping forever
between call_refresh and call_refreshresult.

The correct thing to do here is to exit on all errors except
EAGAIN and ETIMEDOUT, for which case we retry 3 times, then
return EACCES.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 net/sunrpc/clnt.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 9dab9573be41..92ce94f5146b 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -989,20 +989,26 @@ call_refreshresult(struct rpc_task *task)
 	dprint_status(task);
 
 	task->tk_status = 0;
-	task->tk_action = call_allocate;
-	if (status >= 0 && rpcauth_uptodatecred(task))
-		return;
+	task->tk_action = call_refresh;
 	switch (status) {
-	case -EACCES:
-		rpc_exit(task, -EACCES);
-		return;
-	case -ENOMEM:
-		rpc_exit(task, -ENOMEM);
+	case 0:
+		if (rpcauth_uptodatecred(task))
+			task->tk_action = call_allocate;
 		return;
 	case -ETIMEDOUT:
 		rpc_delay(task, 3*HZ);
+	case -EAGAIN:
+		status = -EACCES;
+		if (!task->tk_cred_retry)
+			break;
+		task->tk_cred_retry--;
+		dprintk("RPC: %5u %s: retry refresh creds\n",
+				task->tk_pid, __func__);
+		return;
 	}
-	task->tk_action = call_refresh;
+	dprintk("RPC: %5u %s: refresh creds failed with error %d\n",
+				task->tk_pid, __func__, status);
+	rpc_exit(task, status);
 }
 
 /*

From b47d19de2c714020ba8f5545a6e7d4968f37eb45 Mon Sep 17 00:00:00 2001
From: Arun Bharadwaj <arun@linux.vnet.ibm.com>
Date: Thu, 18 Nov 2010 10:36:43 +0000
Subject: [PATCH 0859/1066] Pure nfs client performance using odirect.

When an application opens a file with O_DIRECT flag, if the size of
the data that is written is equal to wsize, the client sends a
WRITE RPC with stable flag set to UNSTABLE followed by a single
COMMIT RPC rather than sending a single WRITE RPC with the stable
flag set to FILE_SYNC. This a bug.

Patch to fix this.

Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/direct.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index 84d3c8b90206..e6ace0d93c71 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -867,7 +867,7 @@ static ssize_t nfs_direct_write(struct kiocb *iocb, const struct iovec *iov,
 		goto out;
 	nfs_alloc_commit_data(dreq);
 
-	if (dreq->commit_data == NULL || count < wsize)
+	if (dreq->commit_data == NULL || count <= wsize)
 		sync = NFS_FILE_SYNC;
 
 	dreq->inode = inode;

From 463a376eae1c92a66c912af539bfd4bbefa37673 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Sat, 20 Nov 2010 12:22:20 -0500
Subject: [PATCH 0860/1066] NFS: Buffer overflow in ->decode_dirent() should
 not be fatal

Overflowing the buffer in the readdir ->decode_dirent() should not lead to
a fatal error, but rather to an attempt to reread the record in question.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/nfs2xdr.c | 2 +-
 fs/nfs/nfs3xdr.c | 2 +-
 fs/nfs/nfs4xdr.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/nfs/nfs2xdr.c b/fs/nfs/nfs2xdr.c
index 2563f765c9b4..ab5937734f0b 100644
--- a/fs/nfs/nfs2xdr.c
+++ b/fs/nfs/nfs2xdr.c
@@ -495,7 +495,7 @@ nfs_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry, struct nfs_se
 
 out_overflow:
 	print_overflow_msg(__func__, xdr);
-	return ERR_PTR(-EIO);
+	return ERR_PTR(-EAGAIN);
 }
 
 /*
diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c
index 748dc91a4a14..e79e4f5f5d53 100644
--- a/fs/nfs/nfs3xdr.c
+++ b/fs/nfs/nfs3xdr.c
@@ -656,7 +656,7 @@ nfs3_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry, struct nfs_s
 out_overflow:
 	print_overflow_msg(__func__, xdr);
 out_overflow_exit:
-	return ERR_PTR(-EIO);
+	return ERR_PTR(-EAGAIN);
 }
 
 /*
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index b7a204ff6fe1..a3b39cbc90f9 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -6221,7 +6221,7 @@ __be32 *nfs4_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
 
 out_overflow:
 	print_overflow_msg(__func__, xdr);
-	return ERR_PTR(-EIO);
+	return ERR_PTR(-EAGAIN);
 }
 
 /*

From 5c346854d8ce6ca91931f8fc9177934257a667d0 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Sat, 20 Nov 2010 12:43:45 -0500
Subject: [PATCH 0861/1066] NFS: Assume eof if the server returns no readdir
 records

Some servers are known to be buggy w.r.t. this. Deal with them...

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/dir.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 662df2a5fad5..2789cb3fc425 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -466,8 +466,9 @@ int nfs_readdir_page_filler(nfs_readdir_descriptor_t *desc, struct nfs_entry *en
 	struct xdr_stream stream;
 	struct xdr_buf buf;
 	__be32 *ptr = xdr_page;
-	int status;
 	struct nfs_cache_array *array;
+	unsigned int count = 0;
+	int status;
 
 	buf.head->iov_base = xdr_page;
 	buf.head->iov_len = buflen;
@@ -488,6 +489,8 @@ int nfs_readdir_page_filler(nfs_readdir_descriptor_t *desc, struct nfs_entry *en
 			break;
 		}
 
+		count++;
+
 		if (desc->plus == 1)
 			nfs_prime_dcache(desc->file->f_path.dentry, entry);
 
@@ -496,13 +499,14 @@ int nfs_readdir_page_filler(nfs_readdir_descriptor_t *desc, struct nfs_entry *en
 			break;
 	} while (!entry->eof);
 
-	if (status == -EBADCOOKIE && entry->eof) {
+	if (count == 0 || (status == -EBADCOOKIE && entry->eof == 1)) {
 		array = nfs_readdir_get_array(page);
 		if (!IS_ERR(array)) {
 			array->eof_index = array->size;
 			status = 0;
 			nfs_readdir_release_array(page);
-		}
+		} else
+			status = PTR_ERR(array);
 	}
 	return status;
 }

From e7c58e974a0318fcca5368e7b3570e10e9ae9028 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Sat, 20 Nov 2010 13:22:24 -0500
Subject: [PATCH 0862/1066] NFS: Fix a page leak in nfs_do_filldir()

nfs_do_filldir() must always free desc->page when it is done, otherwise
we end up leaking the page.

Also remove unused variable 'dentry'.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/dir.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 2789cb3fc425..42e66e961d73 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -701,11 +701,12 @@ int nfs_do_filldir(nfs_readdir_descriptor_t *desc, void *dirent,
 	int res = 0;
 	struct nfs_cache_array *array = NULL;
 	unsigned int d_type = DT_UNKNOWN;
-	struct dentry *dentry = NULL;
 
 	array = nfs_readdir_get_array(desc->page);
-	if (IS_ERR(array))
-		return PTR_ERR(array);
+	if (IS_ERR(array)) {
+		res = PTR_ERR(array);
+		goto out;
+	}
 
 	for (i = desc->cache_entry_index; i < array->size; i++) {
 		d_type = DT_UNKNOWN;
@@ -726,9 +727,8 @@ int nfs_do_filldir(nfs_readdir_descriptor_t *desc, void *dirent,
 		desc->eof = 1;
 
 	nfs_readdir_release_array(desc->page);
+out:
 	cache_page_release(desc);
-	if (dentry != NULL)
-		dput(dentry);
 	dfprintk(DIRCACHE, "NFS: nfs_do_filldir() filling ended @ cookie %Lu; returning = %d\n",
 			(unsigned long long)*desc->dir_cookie, res);
 	return res;

From 7a8e1dc34f52fd2927dbf7e520d7cd8eadc51336 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Sat, 20 Nov 2010 13:24:46 -0500
Subject: [PATCH 0863/1066] NFS: Fix a page leak in uncached_readdir()

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/dir.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 42e66e961d73..353f47c31b1d 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -763,13 +763,14 @@ int uncached_readdir(nfs_readdir_descriptor_t *desc, void *dirent,
 		goto out;
 	}
 
+	desc->page_index = 0;
+	desc->page = page;
+
 	if (nfs_readdir_xdr_to_array(desc, page, inode) == -1) {
 		status = -EIO;
 		goto out_release;
 	}
 
-	desc->page_index = 0;
-	desc->page = page;
 	status = nfs_do_filldir(desc, dirent, filldir);
 
  out:

From 85f8607e163f8d281fb407357279cb4ac6df12e6 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Sat, 20 Nov 2010 13:24:49 -0500
Subject: [PATCH 0864/1066] NFS: Fix the error handling in "uncached_readdir()"

Currently, uncached_readdir() is broken because if fails to handle
the results from nfs_readdir_xdr_to_array() correctly.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/dir.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 353f47c31b1d..2492bacf68a7 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -766,10 +766,9 @@ int uncached_readdir(nfs_readdir_descriptor_t *desc, void *dirent,
 	desc->page_index = 0;
 	desc->page = page;
 
-	if (nfs_readdir_xdr_to_array(desc, page, inode) == -1) {
-		status = -EIO;
+	status = nfs_readdir_xdr_to_array(desc, page, inode);
+	if (status < 0)
 		goto out_release;
-	}
 
 	status = nfs_do_filldir(desc, dirent, filldir);
 

From ece0b4233b6b915d1f63add2bd9f2733aec6317a Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Sat, 20 Nov 2010 13:55:33 -0500
Subject: [PATCH 0865/1066] NFS: Don't ignore errors from nfs_do_filldir()

We should ignore the errors from the filldir callback, and just interpret
them as meaning we should exit, however we should definitely pass back
ENOMEM errors.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/dir.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 2492bacf68a7..ddc2e439702b 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -709,13 +709,15 @@ int nfs_do_filldir(nfs_readdir_descriptor_t *desc, void *dirent,
 	}
 
 	for (i = desc->cache_entry_index; i < array->size; i++) {
+		struct nfs_cache_array_entry *ent;
 		d_type = DT_UNKNOWN;
 
-		res = filldir(dirent, array->array[i].string.name,
-			array->array[i].string.len, file->f_pos,
-			nfs_compat_user_ino64(array->array[i].ino), d_type);
-		if (res < 0)
+		ent = &array->array[i];
+		if (filldir(dirent, ent->string.name, ent->string.len,
+		    file->f_pos, nfs_compat_user_ino64(ent->ino), d_type) < 0) {
+			desc->eof = 1;
 			break;
+		}
 		file->f_pos++;
 		desc->cache_entry_index = i;
 		if (i < (array->size-1))
@@ -820,14 +822,14 @@ static int nfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
 		res = readdir_search_pagecache(desc);
 
 		if (res == -EBADCOOKIE) {
+			res = 0;
 			/* This means either end of directory */
 			if (*desc->dir_cookie && desc->eof == 0) {
 				/* Or that the server has 'lost' a cookie */
 				res = uncached_readdir(desc, dirent, filldir);
-				if (res >= 0)
+				if (res == 0)
 					continue;
 			}
-			res = 0;
 			break;
 		}
 		if (res == -ETOOSMALL && desc->plus) {
@@ -842,10 +844,8 @@ static int nfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
 			break;
 
 		res = nfs_do_filldir(desc, dirent, filldir);
-		if (res < 0) {
-			res = 0;
+		if (res < 0)
 			break;
-		}
 	}
 out:
 	nfs_unblock_sillyrename(dentry);

From 3020093f578fb6c9acc6914dfd887a1ebd1db659 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Sat, 20 Nov 2010 15:18:22 -0500
Subject: [PATCH 0866/1066] NFS: Correct the array bound calculation in
 nfs_readdir_add_to_array

It looks as if the array size calculation in MAX_READDIR_ARRAY does not
take the alignment of struct nfs_cache_array_entry into account.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/dir.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index ddc2e439702b..ced7291cc5f8 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -171,8 +171,6 @@ struct nfs_cache_array {
 	struct nfs_cache_array_entry array[0];
 };
 
-#define MAX_READDIR_ARRAY ((PAGE_SIZE - sizeof(struct nfs_cache_array)) / sizeof(struct nfs_cache_array_entry))
-
 typedef __be32 * (*decode_dirent_t)(struct xdr_stream *, struct nfs_entry *, struct nfs_server *, int);
 typedef struct {
 	struct file	*file;
@@ -257,11 +255,14 @@ int nfs_readdir_add_to_array(struct nfs_entry *entry, struct page *page)
 
 	if (IS_ERR(array))
 		return PTR_ERR(array);
-	ret = -ENOSPC;
-	if (array->size >= MAX_READDIR_ARRAY)
-		goto out;
 
 	cache_entry = &array->array[array->size];
+
+	/* Check that this entry lies within the page bounds */
+	ret = -ENOSPC;
+	if ((char *)&cache_entry[1] - (char *)page_address(page) > PAGE_SIZE)
+		goto out;
+
 	cache_entry->cookie = entry->prev_cookie;
 	cache_entry->ino = entry->ino;
 	ret = nfs_readdir_make_qstr(&cache_entry->string, entry->name, entry->len);

From 0b26a0bf6ff398185546432420bb772bcfdf8d94 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Sat, 20 Nov 2010 14:26:44 -0500
Subject: [PATCH 0867/1066] NFS: Ensure we return the dirent->d_type when it is
 known

Store the dirent->d_type in the struct nfs_cache_array_entry so that we
can use it in getdents() calls.

This fixes a regression with the new readdir code.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/dir.c            | 7 ++++---
 fs/nfs/internal.h       | 9 +++++++++
 fs/nfs/nfs2xdr.c        | 2 ++
 fs/nfs/nfs3xdr.c        | 2 ++
 fs/nfs/nfs4xdr.c        | 4 ++++
 include/linux/nfs_xdr.h | 1 +
 6 files changed, 22 insertions(+), 3 deletions(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index ced7291cc5f8..8ea4a4180a87 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -162,6 +162,7 @@ struct nfs_cache_array_entry {
 	u64 cookie;
 	u64 ino;
 	struct qstr string;
+	unsigned char d_type;
 };
 
 struct nfs_cache_array {
@@ -265,6 +266,7 @@ int nfs_readdir_add_to_array(struct nfs_entry *entry, struct page *page)
 
 	cache_entry->cookie = entry->prev_cookie;
 	cache_entry->ino = entry->ino;
+	cache_entry->d_type = entry->d_type;
 	ret = nfs_readdir_make_qstr(&cache_entry->string, entry->name, entry->len);
 	if (ret)
 		goto out;
@@ -701,7 +703,6 @@ int nfs_do_filldir(nfs_readdir_descriptor_t *desc, void *dirent,
 	int i = 0;
 	int res = 0;
 	struct nfs_cache_array *array = NULL;
-	unsigned int d_type = DT_UNKNOWN;
 
 	array = nfs_readdir_get_array(desc->page);
 	if (IS_ERR(array)) {
@@ -711,11 +712,11 @@ int nfs_do_filldir(nfs_readdir_descriptor_t *desc, void *dirent,
 
 	for (i = desc->cache_entry_index; i < array->size; i++) {
 		struct nfs_cache_array_entry *ent;
-		d_type = DT_UNKNOWN;
 
 		ent = &array->array[i];
 		if (filldir(dirent, ent->string.name, ent->string.len,
-		    file->f_pos, nfs_compat_user_ino64(ent->ino), d_type) < 0) {
+		    file->f_pos, nfs_compat_user_ino64(ent->ino),
+		    ent->d_type) < 0) {
 			desc->eof = 1;
 			break;
 		}
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index db08ff3ff454..e6356b750b77 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -361,6 +361,15 @@ unsigned int nfs_page_length(struct page *page)
 	return 0;
 }
 
+/*
+ * Convert a umode to a dirent->d_type
+ */
+static inline
+unsigned char nfs_umode_to_dtype(umode_t mode)
+{
+	return (mode >> 12) & 15;
+}
+
 /*
  * Determine the number of pages in an array of length 'len' and
  * with a base offset of 'base'
diff --git a/fs/nfs/nfs2xdr.c b/fs/nfs/nfs2xdr.c
index ab5937734f0b..5914a1911c95 100644
--- a/fs/nfs/nfs2xdr.c
+++ b/fs/nfs/nfs2xdr.c
@@ -485,6 +485,8 @@ nfs_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry, struct nfs_se
 	entry->prev_cookie	  = entry->cookie;
 	entry->cookie	  = ntohl(*p++);
 
+	entry->d_type = DT_UNKNOWN;
+
 	p = xdr_inline_peek(xdr, 8);
 	if (p != NULL)
 		entry->eof = !p[0] && p[1];
diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c
index e79e4f5f5d53..f6cc60f06dac 100644
--- a/fs/nfs/nfs3xdr.c
+++ b/fs/nfs/nfs3xdr.c
@@ -622,11 +622,13 @@ nfs3_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry, struct nfs_s
 	entry->prev_cookie = entry->cookie;
 	p = xdr_decode_hyper(p, &entry->cookie);
 
+	entry->d_type = DT_UNKNOWN;
 	if (plus) {
 		entry->fattr->valid = 0;
 		p = xdr_decode_post_op_attr_stream(xdr, entry->fattr);
 		if (IS_ERR(p))
 			goto out_overflow_exit;
+		entry->d_type = nfs_umode_to_dtype(entry->fattr->mode);
 		/* In fact, a post_op_fh3: */
 		p = xdr_inline_decode(xdr, 4);
 		if (unlikely(!p))
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index a3b39cbc90f9..9f1826b012e6 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -6208,6 +6208,10 @@ __be32 *nfs4_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
 	if (entry->fattr->valid & NFS_ATTR_FATTR_FILEID)
 		entry->ino = entry->fattr->fileid;
 
+	entry->d_type = DT_UNKNOWN;
+	if (entry->fattr->valid & NFS_ATTR_FATTR_TYPE)
+		entry->d_type = nfs_umode_to_dtype(entry->fattr->mode);
+
 	if (verify_attr_len(xdr, p, len) < 0)
 		goto out_overflow;
 
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index ba6cc8f223c9..80f07198a31a 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -483,6 +483,7 @@ struct nfs_entry {
 	int			eof;
 	struct nfs_fh *		fh;
 	struct nfs_fattr *	fattr;
+	unsigned char		d_type;
 };
 
 /*

From ec35a69c467026437519bafcf325a7362e422db9 Mon Sep 17 00:00:00 2001
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Date: Tue, 16 Nov 2010 12:09:59 -0500
Subject: [PATCH 0868/1066] xen: set IO permission early (before
 early_cpu_init())

This patch is based off "xen dom0: Set up basic IO permissions for dom0."
by Juan Quintela <quintela@redhat.com>.

On AMD machines when we boot the kernel as Domain 0 we get this nasty:

mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
(XEN) traps.c:475:d0 Unhandled general protection fault fault/trap [#13] on VCPU 0 [ec=0000]
(XEN) domain_crash_sync called from entry.S
(XEN) Domain 0 (vcpu#0) crashed on cpu#0:
(XEN) ----[ Xen-4.1-101116  x86_64  debug=y  Not tainted ]----
(XEN) CPU:    0
(XEN) RIP:    e033:[<ffffffff8130271b>]
(XEN) RFLAGS: 0000000000000282   EM: 1   CONTEXT: pv guest
(XEN) rax: 000000008000c068   rbx: ffffffff8186c680   rcx: 0000000000000068
(XEN) rdx: 0000000000000cf8   rsi: 000000000000c000   rdi: 0000000000000000
(XEN) rbp: ffffffff81801e98   rsp: ffffffff81801e50   r8:  ffffffff81801eac
(XEN) r9:  ffffffff81801ea8   r10: ffffffff81801eb4   r11: 00000000ffffffff
(XEN) r12: ffffffff8186c694   r13: ffffffff81801f90   r14: ffffffffffffffff
(XEN) r15: 0000000000000000   cr0: 000000008005003b   cr4: 00000000000006f0
(XEN) cr3: 0000000221803000   cr2: 0000000000000000
(XEN) ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: e02b   cs: e033
(XEN) Guest stack trace from rsp=ffffffff81801e50:

RIP points to read_pci_config() function.

The issue is that we don't set IO permissions for the Linux kernel early enough.

The call sequence used to be:

    xen_start_kernel()
	x86_init.oem.arch_setup = xen_setup_arch;
        setup_arch:
           - early_cpu_init
               - early_init_amd
                  - read_pci_config
           - x86_init.oem.arch_setup [ xen_arch_setup ]
               - set IO permissions.

We need to set the IO permissions earlier on, which this patch does.

Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/xen/enlighten.c | 12 +++++++++++-
 arch/x86/xen/setup.c     |  8 --------
 2 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index bd3554934613..7250bef7f49e 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1095,6 +1095,8 @@ static void __init xen_setup_stackprotector(void)
 /* First C function to be called on Xen boot */
 asmlinkage void __init xen_start_kernel(void)
 {
+	struct physdev_set_iopl set_iopl;
+	int rc;
 	pgd_t *pgd;
 
 	if (!xen_start_info)
@@ -1209,10 +1211,18 @@ asmlinkage void __init xen_start_kernel(void)
 #else
 	pv_info.kernel_rpl = 0;
 #endif
-
 	/* set the limit of our address space */
 	xen_reserve_top();
 
+	/* We used to do this in xen_arch_setup, but that is too late on AMD
+	 * were early_cpu_init (run before ->arch_setup()) calls early_amd_init
+	 * which pokes 0xcf8 port.
+	 */
+	set_iopl.iopl = 1;
+	rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
+	if (rc != 0)
+		xen_raw_printk("physdev_op failed %d\n", rc);
+
 #ifdef CONFIG_X86_32
 	/* set up basic CPUID stuff */
 	cpu_detect(&new_cpu_data);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 630fb53c95f3..38fdffaa71d3 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -336,9 +336,6 @@ void __cpuinit xen_enable_syscall(void)
 
 void __init xen_arch_setup(void)
 {
-	struct physdev_set_iopl set_iopl;
-	int rc;
-
 	xen_panic_handler_init();
 
 	HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments);
@@ -355,11 +352,6 @@ void __init xen_arch_setup(void)
 	xen_enable_sysenter();
 	xen_enable_syscall();
 
-	set_iopl.iopl = 1;
-	rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
-	if (rc != 0)
-		printk(KERN_INFO "physdev_op failed %d\n", rc);
-
 #ifdef CONFIG_ACPI
 	if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
 		printk(KERN_INFO "ACPI in unprivileged domain disabled\n");

From 12334715720b012180579f57650879d0fbb11a84 Mon Sep 17 00:00:00 2001
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Date: Fri, 19 Nov 2010 11:27:09 -0500
Subject: [PATCH 0869/1066] xen/events: Use PIRQ instead of GSI value when
 unmapping MSI/MSI-X irqs.

When we allocate a vector for MSI/MSI-X we save away the PIRQ, and the
vector value. When we unmap (de-allocate) the MSI/MSI-X vector(s) we
need to provide the PIRQ and the vector value. What we did instead
was to provide the GSI (which was zero) and the vector value, and we
got these unhappy error messages:

(XEN) irq.c:1575: dom0: pirq 0 not mapped
[    7.733415] unmap irq failed -22

This patches fixes this and we use the PIRQ value instead of the GSI
value.

CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 drivers/xen/events.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index d6d4f76ed500..2811bb988ea0 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -755,7 +755,7 @@ int xen_destroy_irq(int irq)
 		goto out;
 
 	if (xen_initial_domain()) {
-		unmap_irq.pirq = info->u.pirq.gsi;
+		unmap_irq.pirq = info->u.pirq.pirq;
 		unmap_irq.domid = DOMID_SELF;
 		rc = HYPERVISOR_physdev_op(PHYSDEVOP_unmap_pirq, &unmap_irq);
 		if (rc) {

From 15ec44611904be0dcc97b84c29fbf964e5e2b36f Mon Sep 17 00:00:00 2001
From: Philip Rakity <prakity@marvell.com>
Date: Fri, 19 Nov 2010 16:48:39 -0500
Subject: [PATCH 0870/1066] mmc: sdhci: 8-bit bus width changes

We now:
 * check for a v3 controller before setting 8-bit bus width
 * offer a callback for platform code to switch to 8-bit mode, which
   allows non-v3 controllers to support it
 * rely on mmc->caps |= MMC_CAP_8_BIT_DATA; in platform code to specify
   that the board designers have indeed brought out all the pins for
   8-bit to the slot.

We were previously relying only on whether the *controller* supported
8-bit, which doesn't tell us anything about the pin configuration in
the board design.

This fixes the MMC card regression reported by Maxim Levitsky here:
   http://thread.gmane.org/gmane.linux.kernel.mmc/4336
by no longer assuming that 8-bit works by default.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 arch/arm/plat-pxa/include/plat/sdhci.h |  3 ++
 drivers/mmc/host/sdhci-pxa.c           |  4 +++
 drivers/mmc/host/sdhci.c               | 44 +++++++++++++++++++-------
 drivers/mmc/host/sdhci.h               |  5 ++-
 4 files changed, 44 insertions(+), 12 deletions(-)

diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h b/arch/arm/plat-pxa/include/plat/sdhci.h
index e49c5b6fc4e2..1ab332e37d7d 100644
--- a/arch/arm/plat-pxa/include/plat/sdhci.h
+++ b/arch/arm/plat-pxa/include/plat/sdhci.h
@@ -17,6 +17,9 @@
 /* Require clock free running */
 #define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0)
 
+/* Board design supports 8-bit data on SD/SDIO BUS */
+#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2)
+
 /*
  * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
  * @max_speed: the maximum speed supported
diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c
index fc406ac5d193..5a61208cbc66 100644
--- a/drivers/mmc/host/sdhci-pxa.c
+++ b/drivers/mmc/host/sdhci-pxa.c
@@ -141,6 +141,10 @@ static int __devinit sdhci_pxa_probe(struct platform_device *pdev)
 	if (pdata->quirks)
 		host->quirks |= pdata->quirks;
 
+	/* If slot design supports 8 bit data, indicate this to MMC. */
+	if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
+		host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add host\n");
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 154cbf83c1ab..a25db426c910 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1185,18 +1185,32 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (host->ops->platform_send_init_74_clocks)
 		host->ops->platform_send_init_74_clocks(host, ios->power_mode);
 
+	/*
+	 * If your platform has 8-bit width support but is not a v3 controller,
+	 * or if it requires special setup code, you should implement that in
+	 * platform_8bit_width().
+	 */
+	if (host->ops->platform_8bit_width)
+		host->ops->platform_8bit_width(host, ios->bus_width);
+	else {
+		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+		if (ios->bus_width == MMC_BUS_WIDTH_8) {
+			ctrl &= ~SDHCI_CTRL_4BITBUS;
+			if (host->version >= SDHCI_SPEC_300)
+				ctrl |= SDHCI_CTRL_8BITBUS;
+		} else {
+			if (host->version >= SDHCI_SPEC_300)
+				ctrl &= ~SDHCI_CTRL_8BITBUS;
+			if (ios->bus_width == MMC_BUS_WIDTH_4)
+				ctrl |= SDHCI_CTRL_4BITBUS;
+			else
+				ctrl &= ~SDHCI_CTRL_4BITBUS;
+		}
+		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+	}
+
 	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 
-	if (ios->bus_width == MMC_BUS_WIDTH_8)
-		ctrl |= SDHCI_CTRL_8BITBUS;
-	else
-		ctrl &= ~SDHCI_CTRL_8BITBUS;
-
-	if (ios->bus_width == MMC_BUS_WIDTH_4)
-		ctrl |= SDHCI_CTRL_4BITBUS;
-	else
-		ctrl &= ~SDHCI_CTRL_4BITBUS;
-
 	if ((ios->timing == MMC_TIMING_SD_HS ||
 	     ios->timing == MMC_TIMING_MMC_HS)
 	    && !(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT))
@@ -1855,11 +1869,19 @@ int sdhci_add_host(struct sdhci_host *host)
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
 	else
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
+
 	mmc->f_max = host->max_clk;
 	mmc->caps |= MMC_CAP_SDIO_IRQ;
 
+	/*
+	 * A controller may support 8-bit width, but the board itself
+	 * might not have the pins brought out.  Boards that support
+	 * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in
+	 * their platform code before calling sdhci_add_host(), and we
+	 * won't assume 8-bit width for hosts without that CAP.
+	 */
 	if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
-		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+		mmc->caps |= MMC_CAP_4_BIT_DATA;
 
 	if (caps & SDHCI_CAN_DO_HISPD)
 		mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index d52a7163b97a..e42d7f00c060 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -76,7 +76,7 @@
 #define   SDHCI_CTRL_ADMA1	0x08
 #define   SDHCI_CTRL_ADMA32	0x10
 #define   SDHCI_CTRL_ADMA64	0x18
-#define  SDHCI_CTRL_8BITBUS	0x20
+#define   SDHCI_CTRL_8BITBUS	0x20
 
 #define SDHCI_POWER_CONTROL	0x29
 #define  SDHCI_POWER_ON		0x01
@@ -155,6 +155,7 @@
 #define  SDHCI_CLOCK_BASE_SHIFT	8
 #define  SDHCI_MAX_BLOCK_MASK	0x00030000
 #define  SDHCI_MAX_BLOCK_SHIFT  16
+#define  SDHCI_CAN_DO_8BIT	0x00040000
 #define  SDHCI_CAN_DO_ADMA2	0x00080000
 #define  SDHCI_CAN_DO_ADMA1	0x00100000
 #define  SDHCI_CAN_DO_HISPD	0x00200000
@@ -215,6 +216,8 @@ struct sdhci_ops {
 	unsigned int	(*get_max_clock)(struct sdhci_host *host);
 	unsigned int	(*get_min_clock)(struct sdhci_host *host);
 	unsigned int	(*get_timeout_clock)(struct sdhci_host *host);
+	int		(*platform_8bit_width)(struct sdhci_host *host,
+					       int width);
 	void (*platform_send_init_74_clocks)(struct sdhci_host *host,
 					     u8 power_mode);
 	unsigned int    (*get_ro)(struct sdhci_host *host);

From d47844a014fada1a788719f6426bc7044f2a0fd8 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 20 Nov 2010 03:08:47 +0100
Subject: [PATCH 0871/1066] ath9k: fix timeout on stopping rx dma

It seems that using ath9k_hw_stoppcurecv to stop rx dma is not enough.
When it's time to stop DMA, the PCU is still busy, so the rx enable
bit never clears.
Using ath9k_hw_abortpcurecv helps with getting rx stopped much faster,
with this change, I cannot reproduce the rx stop related WARN_ON anymore.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/recv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index c76ea53c20ce..1a62e351ec77 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -518,7 +518,7 @@ bool ath_stoprecv(struct ath_softc *sc)
 	bool stopped;
 
 	spin_lock_bh(&sc->rx.rxbuflock);
-	ath9k_hw_stoppcurecv(ah);
+	ath9k_hw_abortpcurecv(ah);
 	ath9k_hw_setrxfilter(ah, 0);
 	stopped = ath9k_hw_stopdmarecv(ah);
 

From 1d8638d4038eb8709edc80e37a0bbb77253d86e9 Mon Sep 17 00:00:00 2001
From: Daniel Klaffenbach <danielklaffenbach@gmail.com>
Date: Fri, 19 Nov 2010 21:25:21 -0600
Subject: [PATCH 0872/1066] ssb: b43-pci-bridge: Add new vendor for BCM4318

Add new vendor for Broadcom 4318.

Signed-off-by: Daniel Klaffenbach <danielklaffenbach@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/ssb/b43_pci_bridge.c | 1 +
 include/linux/pci_ids.h      | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/ssb/b43_pci_bridge.c b/drivers/ssb/b43_pci_bridge.c
index ef9c6a04ad8f..744d3f6e4709 100644
--- a/drivers/ssb/b43_pci_bridge.c
+++ b/drivers/ssb/b43_pci_bridge.c
@@ -24,6 +24,7 @@ static const struct pci_device_id b43_pci_bridge_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BCM_GVC,  0x4318) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index d278dd9cb765..f29c25ede70d 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2043,6 +2043,7 @@
 #define PCI_DEVICE_ID_AFAVLAB_P030	0x2182
 #define PCI_SUBDEVICE_ID_AFAVLAB_P061		0x2150
 
+#define PCI_VENDOR_ID_BCM_GVC          0x14a4
 #define PCI_VENDOR_ID_BROADCOM		0x14e4
 #define PCI_DEVICE_ID_TIGON3_5752	0x1600
 #define PCI_DEVICE_ID_TIGON3_5752M	0x1601

From b397492a8c1022887a9b2fb925fe92e69ce0ad4d Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sat, 20 Nov 2010 13:15:27 +0100
Subject: [PATCH 0873/1066] carl9170: fix virtual interface setup crash

This patch fixes a faulty bound check which caused a
crash when too many virtual interface were brought up.

BUG: unable to handle kernel NULL pointer dereference at 00000004
IP: [<f8125f67>] carl9170_op_add_interface+0x1d7/0x2c0 [carl9170]
*pde = 00000000
Oops: 0002 [#1] PREEMPT
Modules linked in: carl9170 [...]
Pid: 4720, comm: wpa_supplicant Not tainted 2.6.37-rc2-wl+
EIP: 0060:[<f8125f67>] EFLAGS: 00210206 CPU: 0
EIP is at carl9170_op_add_interface+0x1d7/0x2c0 [carl9170]
EAX: 00000000 ...
Process wpa_supplicant
Stack:
 f4f88f34 fffffff4 ..
Call Trace:
 [<f8f4e666>] ? ieee80211_do_open+0x406/0x5c0 [mac80211]
 [...]
Code: <89> 42 04 ...
EIP: [<f8125f67>] carl9170_op_add_interface+0x1d7/0x2c0 [carl9170]
CR2: 0000000000000004

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/carl9170/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c
index 980ae70ea424..a314c2c2bfbe 100644
--- a/drivers/net/wireless/ath/carl9170/main.c
+++ b/drivers/net/wireless/ath/carl9170/main.c
@@ -647,7 +647,7 @@ init:
 	}
 
 unlock:
-	if (err && (vif_id != -1)) {
+	if (err && (vif_id >= 0)) {
 		vif_priv->active = false;
 		bitmap_release_region(&ar->vif_bitmap, vif_id, 0);
 		ar->vifs--;

From c48a2916355337895aea33839d39810eb575e775 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <guenter.roeck@ericsson.com>
Date: Fri, 19 Nov 2010 09:39:11 -0800
Subject: [PATCH 0874/1066] hwmon: (i5k_amb) Fix compile warning

This patch fixes the following compile warning.

drivers/hwmon/i5k_amb.c:500: warning: 'i5k_amb_ids' defined but not used

The warning is seen if the driver is built into the kernel (not as module).

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/i5k_amb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index 937983407e2a..c4c40be0edbf 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -497,12 +497,14 @@ static unsigned long chipset_ids[] = {
 	0
 };
 
+#ifdef MODULE
 static struct pci_device_id i5k_amb_ids[] __devinitdata = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR) },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, i5k_amb_ids);
+#endif
 
 static int __devinit i5k_amb_probe(struct platform_device *pdev)
 {

From 32292f49f9683622ad0fb95a8c754910121e7b16 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <guenter.roeck@ericsson.com>
Date: Thu, 18 Nov 2010 21:06:45 -0800
Subject: [PATCH 0875/1066] hwmon: (lis3lv02d_i2c) Fix compile warnings

This commit fixes the following compile warnings.

From v2.6.37-rc2/m68k/m68k-allmodconfig, v2.6.37-rc2/powerpc/powerpc-randconfig:
drivers/hwmon/lis3lv02d_i2c.c:222: warning: 'lis3_i2c_runtime_suspend' defined but not used
drivers/hwmon/lis3lv02d_i2c.c:231: warning: 'lis3_i2c_runtime_resume' defined but not used

Seen if CONFIG_PM_RUNTIME is not set.

From v2.6.37-rc2/sh4/sh-allyesconfig:
drivers/hwmon/lis3lv02d_i2c.c:191: warning: 'lis3lv02d_i2c_suspend' defined but not used
drivers/hwmon/lis3lv02d_i2c.c:201: warning: 'lis3lv02d_i2c_resume' defined but not used

Seen if CONFIG_PM is set but CONFIG_PM_SLEEP is not.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/lis3lv02d_i2c.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c
index 9f4bae07f719..8853afce85ce 100644
--- a/drivers/hwmon/lis3lv02d_i2c.c
+++ b/drivers/hwmon/lis3lv02d_i2c.c
@@ -186,7 +186,7 @@ static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client)
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int lis3lv02d_i2c_suspend(struct device *dev)
 {
 	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
@@ -213,12 +213,9 @@ static int lis3lv02d_i2c_resume(struct device *dev)
 
 	return 0;
 }
-#else
-#define lis3lv02d_i2c_suspend	NULL
-#define lis3lv02d_i2c_resume	NULL
-#define lis3lv02d_i2c_shutdown	NULL
-#endif
+#endif /* CONFIG_PM_SLEEP */
 
+#ifdef CONFIG_PM_RUNTIME
 static int lis3_i2c_runtime_suspend(struct device *dev)
 {
 	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
@@ -236,6 +233,7 @@ static int lis3_i2c_runtime_resume(struct device *dev)
 	lis3lv02d_poweron(lis3);
 	return 0;
 }
+#endif /* CONFIG_PM_RUNTIME */
 
 static const struct i2c_device_id lis3lv02d_id[] = {
 	{"lis3lv02d", 0 },

From b3915d1fb6557dda206f4644ba9aa96ffd9a99d2 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segoon@openwall.com>
Date: Mon, 22 Nov 2010 18:59:13 +0300
Subject: [PATCH 0876/1066] ASoC: atmel: test wrong variable

After clk_get() mclk is checked second time instead of pllb check.
In patch v1 Jarkko Nikula noticed that PTR_ERR() is also has wrong argument.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/atmel/sam9g20_wm8731.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
index 293569dfd0ed..032e17dd8fdb 100644
--- a/sound/soc/atmel/sam9g20_wm8731.c
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -222,9 +222,9 @@ static int __init at91sam9g20ek_init(void)
 	}
 
 	pllb = clk_get(NULL, "pllb");
-	if (IS_ERR(mclk)) {
+	if (IS_ERR(pllb)) {
 		printk(KERN_ERR "ASoC: Failed to get PLLB\n");
-		ret = PTR_ERR(mclk);
+		ret = PTR_ERR(pllb);
 		goto err_mclk;
 	}
 	ret = clk_set_parent(mclk, pllb);

From f71a4734b1ad7edccbfd9bd395df328ebbd94287 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 22 Nov 2010 19:11:48 +0000
Subject: [PATCH 0877/1066] ASoC: Fix multi-component mismerge in WM8523

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 sound/soc/codecs/wm8523.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/codecs/wm8523.c b/sound/soc/codecs/wm8523.c
index 712ef7c76f90..9a433a5396cb 100644
--- a/sound/soc/codecs/wm8523.c
+++ b/sound/soc/codecs/wm8523.c
@@ -146,7 +146,6 @@ static int wm8523_startup(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
-	return 0;
 	snd_pcm_hw_constraint_list(substream->runtime, 0,
 				   SNDRV_PCM_HW_PARAM_RATE,
 				   &wm8523->rate_constraint);

From eba19fdd818dfec3782ff095591e51c9bd617403 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Fri, 19 Nov 2010 16:09:15 +0000
Subject: [PATCH 0878/1066] ASoC: Restore WM8994 volatile and readable register
 operations

They went AWOL during the multi-component merge.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 sound/soc/codecs/wm8994.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 830dfdd66c5f..ea3ee9fde2b1 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -4073,6 +4073,8 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8994 = {
 	.resume =	wm8994_resume,
 	.read = wm8994_read,
 	.write = wm8994_write,
+	.readable_register = wm8994_readable,
+	.volatile_register = wm8994_volatile,
 	.set_bias_level = wm8994_set_bias_level,
 };
 

From d090f5976dfcac4935286676825d64e081335e09 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 23 Nov 2010 07:39:58 +0100
Subject: [PATCH 0879/1066] ALSA: Revert "ALSA: hda - Fix switching between
 dmic and mic using the same mux on IDT/STAC"

This reverts commit f41cc2a85d52ac6971299922084ac5ac59dc339d.

The patch broke the digital mic pin handling wrongly.
Reference: bko#23162
	https://bugzilla.kernel.org/show_bug.cgi?id=23162

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_sigmatel.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index cfd73afad882..5c710807dfe5 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -3491,10 +3491,8 @@ static int stac92xx_auto_create_dmic_input_ctls(struct hda_codec *codec,
 				return err;
 		}
 
-		if (snd_hda_get_bool_hint(codec, "separate_dmux") != 1) {
+		if (snd_hda_get_bool_hint(codec, "separate_dmux") != 1)
 			snd_hda_add_imux_item(imux, label, index, NULL);
-			spec->num_analog_muxes++;
-		}
 	}
 
 	return 0;

From 6027277e77df2d2893d906c42f5c9f9abcb731e0 Mon Sep 17 00:00:00 2001
From: Manoj Iyer <manoj.iyer@canonical.com>
Date: Tue, 23 Nov 2010 07:43:44 +0100
Subject: [PATCH 0880/1066] ALSA: hda - Enable jack sense for Thinkpad Edge 11

Add a quirk entry for Thinkpad Edge 11 as well as other TP Edge models.

Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_conexant.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 3cfb31e77b16..846d1ead47fd 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3111,6 +3111,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x17aa, 0x21b2, "Thinkpad X100e", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x21b3, "Thinkpad Edge 13 (197)", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x21b4, "Thinkpad Edge", CXT5066_IDEAPAD),
+	SND_PCI_QUIRK(0x17aa, 0x21c8, "Thinkpad Edge 11", CXT5066_IDEAPAD),
  	SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD),
  	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G series", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x390a, "Lenovo S10-3t", CXT5066_IDEAPAD),

From 103cfcf522cefe00d8c322c6beac9a711acbf235 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Tue, 23 Nov 2010 09:26:02 +0300
Subject: [PATCH 0881/1066] nilfs2: nilfs_iget_for_gc() returns ERR_PTR

nilfs_iget_for_gc() returns an ERR_PTR() on failure and doesn't return
NULL.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/ioctl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index 3e90f86d5bfe..e00d9457c256 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -349,8 +349,8 @@ static int nilfs_ioctl_move_blocks(struct super_block *sb,
 		ino = vdesc->vd_ino;
 		cno = vdesc->vd_cno;
 		inode = nilfs_iget_for_gc(sb, ino, cno);
-		if (unlikely(inode == NULL)) {
-			ret = -ENOMEM;
+		if (IS_ERR(inode)) {
+			ret = PTR_ERR(inode);
 			goto failed;
 		}
 		do {

From 1657cbd87125a623d28ce8a7ef5ff6959098d425 Mon Sep 17 00:00:00 2001
From: Kailang Yang <kailang@realtek.com>
Date: Tue, 23 Nov 2010 08:53:32 +0100
Subject: [PATCH 0882/1066] ALSA: hda - Fix wrong ALC269 variant check

The refactoring commit d433a67831ab2c470cc53a3ff9b60f656767be15
    ALSA: hda - Optimize the check of ALC269 codec variants
introduced a wrong check for ALC269-vb type.  This patch corrects it.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 564e6c136ddd..38b63fb79cbd 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -15104,7 +15104,7 @@ static int patch_alc269(struct hda_codec *codec)
 	spec->stream_digital_capture = &alc269_pcm_digital_capture;
 
 	if (!spec->adc_nids) { /* wasn't filled automatically? use default */
-		if (spec->codec_variant != ALC269_TYPE_NORMAL) {
+		if (spec->codec_variant == ALC269_TYPE_NORMAL) {
 			spec->adc_nids = alc269_adc_nids;
 			spec->num_adc_nids = ARRAY_SIZE(alc269_adc_nids);
 			spec->capsrc_nids = alc269_capsrc_nids;

From 48c88e820fb3e35c5925e4743fd13f200891b7b5 Mon Sep 17 00:00:00 2001
From: Kailang Yang <kailang@realtek.com>
Date: Tue, 23 Nov 2010 08:56:16 +0100
Subject: [PATCH 0883/1066] ALSA: hda - Identify more variants for ALC269

Give more correct chip names for ALC269-variant codecs.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 38b63fb79cbd..0ac6aed0c889 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -14623,7 +14623,10 @@ static int alc275_setup_dual_adc(struct hda_codec *codec)
 /* different alc269-variants */
 enum {
 	ALC269_TYPE_NORMAL,
+	ALC269_TYPE_ALC258,
 	ALC269_TYPE_ALC259,
+	ALC269_TYPE_ALC269VB,
+	ALC269_TYPE_ALC270,
 	ALC269_TYPE_ALC271X,
 };
 
@@ -15023,7 +15026,7 @@ static int alc269_fill_coef(struct hda_codec *codec)
 static int patch_alc269(struct hda_codec *codec)
 {
 	struct alc_spec *spec;
-	int board_config;
+	int board_config, coef;
 	int err;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
@@ -15034,14 +15037,23 @@ static int patch_alc269(struct hda_codec *codec)
 
 	alc_auto_parse_customize_define(codec);
 
-	if ((alc_read_coef_idx(codec, 0) & 0x00f0) == 0x0010){
+	coef = alc_read_coef_idx(codec, 0);
+	if ((coef & 0x00f0) == 0x0010) {
 		if (codec->bus->pci->subsystem_vendor == 0x1025 &&
 		    spec->cdefine.platform_type == 1) {
 			alc_codec_rename(codec, "ALC271X");
 			spec->codec_variant = ALC269_TYPE_ALC271X;
-		} else {
+		} else if ((coef & 0xf000) == 0x1000) {
+			spec->codec_variant = ALC269_TYPE_ALC270;
+		} else if ((coef & 0xf000) == 0x2000) {
 			alc_codec_rename(codec, "ALC259");
 			spec->codec_variant = ALC269_TYPE_ALC259;
+		} else if ((coef & 0xf000) == 0x3000) {
+			alc_codec_rename(codec, "ALC258");
+			spec->codec_variant = ALC269_TYPE_ALC258;
+		} else {
+			alc_codec_rename(codec, "ALC269VB");
+			spec->codec_variant = ALC269_TYPE_ALC269VB;
 		}
 	} else
 		alc_fix_pll_init(codec, 0x20, 0x04, 15);

From 92a5288501685bf05fc348ee2a3115a9bd9ae36f Mon Sep 17 00:00:00 2001
From: Jesper Juhl <jj@chaosbits.net>
Date: Mon, 22 Nov 2010 22:54:03 +0100
Subject: [PATCH 0884/1066] ASoC: MPC5200: Eliminate duplicate include of
 of_device.h

Eliminate duplicate  #include <linux/of_device.h>  from
sound/soc/fsl/mpc5200_dma.c

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/fsl/mpc5200_dma.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
index dce6b551cd78..f92dca07cd35 100644
--- a/sound/soc/fsl/mpc5200_dma.c
+++ b/sound/soc/fsl/mpc5200_dma.c
@@ -9,7 +9,6 @@
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
-#include <linux/of_device.h>
 #include <linux/of_platform.h>
 
 #include <sound/soc.h>

From 7a479b02843c8d78ef51a64d1168592258440c97 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Tue, 23 Nov 2010 14:14:07 +0800
Subject: [PATCH 0885/1066] ASoC: Do not update the cache if write to hardware
 failed

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/tpa6130a2.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/tpa6130a2.c b/sound/soc/codecs/tpa6130a2.c
index ee4fb201de60..d2c243095673 100644
--- a/sound/soc/codecs/tpa6130a2.c
+++ b/sound/soc/codecs/tpa6130a2.c
@@ -78,8 +78,10 @@ static int tpa6130a2_i2c_write(int reg, u8 value)
 
 	if (data->power_state) {
 		val = i2c_smbus_write_byte_data(tpa6130a2_client, reg, value);
-		if (val < 0)
+		if (val < 0) {
 			dev_err(&tpa6130a2_client->dev, "Write failed\n");
+			return val;
+		}
 	}
 
 	/* Either powered on or off, we save the context */

From bc5954f00e80c55140f546c80f34a8660bdd2c5f Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Tue, 23 Nov 2010 15:56:21 +0800
Subject: [PATCH 0886/1066] ASoC: max98088 - fix a memory leak

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/max98088.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c
index 470cb93b1d1f..d63e28773eb1 100644
--- a/sound/soc/codecs/max98088.c
+++ b/sound/soc/codecs/max98088.c
@@ -2019,7 +2019,10 @@ err_access:
 
 static int max98088_remove(struct snd_soc_codec *codec)
 {
+       struct max98088_priv *max98088 = snd_soc_codec_get_drvdata(codec);
+
        max98088_set_bias_level(codec, SND_SOC_BIAS_OFF);
+       kfree(max98088->eq_texts);
 
        return 0;
 }

From cd70978cb59fd20dccdfc790ea8bb308c2dfd1d6 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Tue, 23 Nov 2010 15:57:49 +0800
Subject: [PATCH 0887/1066] ASoC: wm8904 - fix memory leaks

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/wm8904.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 33be84e506ea..fca60a0b57b8 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -2498,6 +2498,8 @@ static int wm8904_remove(struct snd_soc_codec *codec)
 
 	wm8904_set_bias_level(codec, SND_SOC_BIAS_OFF);
 	regulator_bulk_free(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
+	kfree(wm8904->retune_mobile_texts);
+	kfree(wm8904->drc_texts);
 
 	return 0;
 }

From 24fb2b1174ddc1f844e2008eb5b3105832860395 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Tue, 23 Nov 2010 15:58:39 +0800
Subject: [PATCH 0888/1066] ASoC: wm8994 - fix memory leaks

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/wm8994.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index ea3ee9fde2b1..4d3e6f1ac584 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -4061,6 +4061,8 @@ static int  wm8994_codec_remove(struct snd_soc_codec *codec)
 	wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC2_DET, wm8994);
 	wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC1_SHRT, wm8994);
 	wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC1_DET, wm8994);
+	kfree(wm8994->retune_mobile_texts);
+	kfree(wm8994->drc_texts);
 	kfree(wm8994);
 
 	return 0;

From 02a9d03772aa1ff33a26180a2da0bfb191240eda Mon Sep 17 00:00:00 2001
From: Rabin Vincent <rabin@rab.in>
Date: Tue, 23 Nov 2010 22:08:18 +0530
Subject: [PATCH 0889/1066] perf symbols: Remove incorrect open-coded
 container_of()

At least on ARM, padding is inserted between rb_node and sym in struct
symbol_name_rb_node, causing "((void *)sym) - sizeof(struct rb_node)" to
point inside rb_node rather than to the symbol_name_rb_node.  Fix this
by converting the code to use container_of().

Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20101123163106.GA25677@debian>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 tools/perf/util/symbol.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index b39f499e575a..0500895a45af 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -295,7 +295,9 @@ static void symbols__insert_by_name(struct rb_root *self, struct symbol *sym)
 {
 	struct rb_node **p = &self->rb_node;
 	struct rb_node *parent = NULL;
-	struct symbol_name_rb_node *symn = ((void *)sym) - sizeof(*parent), *s;
+	struct symbol_name_rb_node *symn, *s;
+
+	symn = container_of(sym, struct symbol_name_rb_node, sym);
 
 	while (*p != NULL) {
 		parent = *p;

From e476a5a41ad67d0e2b4a652820c49a3923eb936b Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 23 Nov 2010 17:10:24 +0100
Subject: [PATCH 0890/1066] wireless: b43: fix error path in SDIO

Fix unbalanced call to sdio_release_host() on the error path.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/sdio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/b43/sdio.c b/drivers/net/wireless/b43/sdio.c
index 9a55338d957f..09e2dfd7b175 100644
--- a/drivers/net/wireless/b43/sdio.c
+++ b/drivers/net/wireless/b43/sdio.c
@@ -163,6 +163,7 @@ static int b43_sdio_probe(struct sdio_func *func,
 err_free_ssb:
 	kfree(sdio);
 err_disable_func:
+	sdio_claim_host(func);
 	sdio_disable_func(func);
 err_release_host:
 	sdio_release_host(func);

From 5d61b718ec23694a87b2c5c590809c12453a1833 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Tue, 23 Nov 2010 22:19:08 +0000
Subject: [PATCH 0891/1066] SCSI: arm fas216: fix missing ';'

f281233 (SCSI host lock push-down) broke the fas216 build:

drivers/scsi/arm/fas216.h: In function 'fas216_noqueue_command':
drivers/scsi/arm/fas216.h:354: error: storage class specified for parameter 'fas216_intr'
drivers/scsi/arm/fas216.h:356: error: storage class specified for parameter 'fas216_remove'
...

Fix it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/scsi/arm/fas216.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h
index 377cfb72cc66..f30f8d659dc4 100644
--- a/drivers/scsi/arm/fas216.h
+++ b/drivers/scsi/arm/fas216.h
@@ -345,7 +345,7 @@ extern int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt);
  *	   : SCpnt - Command to queue
  * Returns : 0 - success, else error
  */
-extern int fas216_noqueue_command(struct Scsi_Host *, struct scsi_cmnd *)
+extern int fas216_noqueue_command(struct Scsi_Host *, struct scsi_cmnd *);
 
 /* Function: irqreturn_t fas216_intr (FAS216_Info *info)
  * Purpose : handle interrupts from the interface to progress a command

From 932c42b286e2c6479d1cbdee2927cb283b1c0c3b Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Tue, 23 Nov 2010 22:27:55 +0000
Subject: [PATCH 0892/1066] ARM: avoid annoying <4>'s in printk output

Adding KERN_WARNING in the middle of strings now produces those tokens
in the output, rather than accepting the level as was once the case.
Fix this in the one reported case.  There might be more...

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/ioremap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 17e7b0b57e49..55c17a6fb22f 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -206,8 +206,8 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 	 */
 	if (pfn_valid(pfn)) {
 		printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory.  This leads\n"
-		       KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
-		       KERN_WARNING "will fail in the next kernel release.  Please fix your driver.\n");
+		       "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
+		       "will fail in the next kernel release.  Please fix your driver.\n");
 		WARN_ON(1);
 	}
 

From 28c22d7dc99486ef4186dde41d5260e75b3076f7 Mon Sep 17 00:00:00 2001
From: MyungJoo Ham <myungjoo.ham@gmail.com>
Date: Tue, 23 Nov 2010 11:39:23 +0100
Subject: [PATCH 0893/1066] ARM: 6490/1: MM: bugfix: initialize spinlock for
 init_mm.context

init_mm used at kernel/sched.c:idle_task_exit() has spin_lock
(init_mm.context.id_lock) that is not initialized when spin_lock/unlock
is called at an ARM machine. Note that mm_struct.context.id_lock is
usually initialized except for the instance of init_mm at
linux/arch/arm/mm/context.c

Not initializing this spinlock incurs "BUG: pinlock bad magic"
warning when spinlock debug is enabled. We have observed such
instances when testing PM in S5PC210 machines.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/mmu.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index 68870c776671..b4ffe9d5b526 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -13,6 +13,10 @@ typedef struct {
 
 #ifdef CONFIG_CPU_HAS_ASID
 #define ASID(mm)	((mm)->context.id & 255)
+
+/* init_mm.context.id_lock should be initialized. */
+#define INIT_MM_CONTEXT(name)                                                 \
+	.context.id_lock    = __SPIN_LOCK_UNLOCKED(name.context.id_lock),
 #else
 #define ASID(mm)	(0)
 #endif

From f6c26ec5085be805c9dc72d074ef5f504b9cd7df Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Wed, 24 Nov 2010 02:18:59 +0900
Subject: [PATCH 0894/1066] nilfs2: fix typo in comment of nilfs_dat_move
 function

Fixes a typo: "uncommited" -> "uncommitted".

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/dat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nilfs2/dat.c b/fs/nilfs2/dat.c
index 49c844dab33a..59e5fe742f7b 100644
--- a/fs/nilfs2/dat.c
+++ b/fs/nilfs2/dat.c
@@ -335,7 +335,7 @@ int nilfs_dat_move(struct inode *dat, __u64 vblocknr, sector_t blocknr)
 	 * the device at this point.
 	 *
 	 * To prevent nilfs_dat_translate() from returning the
-	 * uncommited block number, this makes a copy of the entry
+	 * uncommitted block number, this makes a copy of the entry
 	 * buffer and redirects nilfs_dat_translate() to the copy.
 	 */
 	if (!buffer_nilfs_redirected(entry_bh)) {

From dfd62d1d84d83f9421792c78bcf72de9bc2bb603 Mon Sep 17 00:00:00 2001
From: Anders Kaseorg <andersk@ksplice.com>
Date: Wed, 24 Nov 2010 15:21:10 -0600
Subject: [PATCH 0895/1066] module: Update prototype for ref_module (formerly
 use_module)

Commit 9bea7f23952d5948f8e5dfdff4de09bb9981fb5f renamed use_module to
ref_module (and changed its return value), but forgot to update this
prototype in module.h.

Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 include/linux/module.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/module.h b/include/linux/module.h
index b29e7458b966..7575bbbdf2a2 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -517,7 +517,7 @@ static inline void __module_get(struct module *module)
 #define symbol_put_addr(p) do { } while(0)
 
 #endif /* CONFIG_MODULE_UNLOAD */
-int use_module(struct module *a, struct module *b);
+int ref_module(struct module *a, struct module *b);
 
 /* This is a #define so the string doesn't get put in every .o file */
 #define module_name(mod)			\

From 7ae4b866f86f9ab7b99484b56dd303a860ad1cc9 Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Thu, 4 Nov 2010 14:24:24 +0200
Subject: [PATCH 0896/1066] virtio: return correct capacity to users

We can't rely on indirect buffers for capacity
calculations because they need a memory allocation
which might fail.  In particular, virtio_net can get
into this situation under stress, and it drops packets
and performs badly.

So return the number of buffers we can guarantee users.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reported-By: Krishna Kumar2 <krkumar2@in.ibm.com>
---
 drivers/virtio/virtio_ring.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 1475ed6b575f..cc2f73e03475 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -230,9 +230,6 @@ add_head:
 	pr_debug("Added buffer head %i to %p\n", head, vq);
 	END_USE(vq);
 
-	/* If we're indirect, we can fit many (assuming not OOM). */
-	if (vq->indirect)
-		return vq->num_free ? vq->vring.num : 0;
 	return vq->num_free;
 }
 EXPORT_SYMBOL_GPL(virtqueue_add_buf_gfp);

From 22e132ff2645aab1e1a25c45e9544a39ae1dc106 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Sat, 6 Nov 2010 10:06:50 +0100
Subject: [PATCH 0897/1066] Char: virtio_console, fix memory leak

Stanse found that in init_vqs, memory is leaked under certain
circumstanses (the fail path order is incorrect). Fix that by checking
allocations in one turn and free all of them at once if some fails
(some may be NULL, but this is OK).

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 drivers/char/virtio_console.c | 37 +++++++++--------------------------
 1 file changed, 9 insertions(+), 28 deletions(-)

diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 6c1b676643a9..896a2ced1d27 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1547,31 +1547,16 @@ static int init_vqs(struct ports_device *portdev)
 	nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2;
 
 	vqs = kmalloc(nr_queues * sizeof(struct virtqueue *), GFP_KERNEL);
-	if (!vqs) {
-		err = -ENOMEM;
-		goto fail;
-	}
 	io_callbacks = kmalloc(nr_queues * sizeof(vq_callback_t *), GFP_KERNEL);
-	if (!io_callbacks) {
-		err = -ENOMEM;
-		goto free_vqs;
-	}
 	io_names = kmalloc(nr_queues * sizeof(char *), GFP_KERNEL);
-	if (!io_names) {
-		err = -ENOMEM;
-		goto free_callbacks;
-	}
 	portdev->in_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
 				  GFP_KERNEL);
-	if (!portdev->in_vqs) {
-		err = -ENOMEM;
-		goto free_names;
-	}
 	portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
 				   GFP_KERNEL);
-	if (!portdev->out_vqs) {
+	if (!vqs || !io_callbacks || !io_names || !portdev->in_vqs ||
+			!portdev->out_vqs) {
 		err = -ENOMEM;
-		goto free_invqs;
+		goto free;
 	}
 
 	/*
@@ -1605,7 +1590,7 @@ static int init_vqs(struct ports_device *portdev)
 					      io_callbacks,
 					      (const char **)io_names);
 	if (err)
-		goto free_outvqs;
+		goto free;
 
 	j = 0;
 	portdev->in_vqs[0] = vqs[0];
@@ -1621,23 +1606,19 @@ static int init_vqs(struct ports_device *portdev)
 			portdev->out_vqs[i] = vqs[j + 1];
 		}
 	}
-	kfree(io_callbacks);
 	kfree(io_names);
+	kfree(io_callbacks);
 	kfree(vqs);
 
 	return 0;
 
-free_names:
-	kfree(io_names);
-free_callbacks:
-	kfree(io_callbacks);
-free_outvqs:
+free:
 	kfree(portdev->out_vqs);
-free_invqs:
 	kfree(portdev->in_vqs);
-free_vqs:
+	kfree(io_names);
+	kfree(io_callbacks);
 	kfree(vqs);
-fail:
+
 	return err;
 }
 

From be6528b2e58d92ef2ffed6f130e2d42bb85dbf29 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 9 Nov 2010 22:20:29 -0800
Subject: [PATCH 0898/1066] virtio: fix format of sysfs driver/vendor files

The sysfs files for virtio produce the wrong format and are missing
the required newline. The output for virtio bus vendor/device should
have the same format as the corresponding entries for PCI devices.

Although this technically changes the ABI for sysfs, these files were
broken to start with!

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 drivers/virtio/virtio.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 3a43ebf83a49..efb35aa8309a 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -9,19 +9,19 @@ static ssize_t device_show(struct device *_d,
 			   struct device_attribute *attr, char *buf)
 {
 	struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
-	return sprintf(buf, "%hu", dev->id.device);
+	return sprintf(buf, "0x%04x\n", dev->id.device);
 }
 static ssize_t vendor_show(struct device *_d,
 			   struct device_attribute *attr, char *buf)
 {
 	struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
-	return sprintf(buf, "%hu", dev->id.vendor);
+	return sprintf(buf, "0x%04x\n", dev->id.vendor);
 }
 static ssize_t status_show(struct device *_d,
 			   struct device_attribute *attr, char *buf)
 {
 	struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
-	return sprintf(buf, "0x%08x", dev->config->get_status(dev));
+	return sprintf(buf, "0x%08x\n", dev->config->get_status(dev));
 }
 static ssize_t modalias_show(struct device *_d,
 			     struct device_attribute *attr, char *buf)

From d94772070acc5a8f312ab4650cbbf5e78ea9dda2 Mon Sep 17 00:00:00 2001
From: Denis Kuplyakov <dener.kup@gmail.com>
Date: Wed, 24 Nov 2010 06:01:09 +0100
Subject: [PATCH 0899/1066] ALSA: hda - Fix Acer 7730G support

Fixes automatic EAPD configuration on Acer 7730G laptop.

Signed-off-by: Denis Kuplyakov <dener.kup@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 49 +++++++++++++++++++++++++++++------
 1 file changed, 41 insertions(+), 8 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 0ac6aed0c889..8f7530fc7644 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2013,6 +2013,36 @@ static struct hda_verb alc888_acer_aspire_6530g_verbs[] = {
 	{ }
 };
 
+/*
+ *ALC888 Acer Aspire 7730G model
+ */
+
+static struct hda_verb alc888_acer_aspire_7730G_verbs[] = {
+/* Bias voltage on for external mic port */
+	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN | PIN_VREF80},
+/* Front Mic: set to PIN_IN (empty by default) */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+/* Unselect Front Mic by default in input mixer 3 */
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)},
+/* Enable unsolicited event for HP jack */
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+/* Enable speaker output */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
+/* Enable headphone output */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | PIN_HP},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+	{0x15, AC_VERB_SET_EAPD_BTLENABLE, 2},
+/*Enable internal subwoofer */
+	{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x17, AC_VERB_SET_CONNECT_SEL, 0x02},
+	{0x17, AC_VERB_SET_EAPD_BTLENABLE, 2},
+	{ }
+};
+
 /*
  * ALC889 Acer Aspire 8930G model
  */
@@ -2200,6 +2230,16 @@ static void alc888_acer_aspire_6530g_setup(struct hda_codec *codec)
 	spec->autocfg.speaker_pins[2] = 0x17;
 }
 
+static void alc888_acer_aspire_7730g_setup(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x16;
+	spec->autocfg.speaker_pins[2] = 0x17;
+}
+
 static void alc889_acer_aspire_8930g_setup(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -9524,13 +9564,6 @@ static struct hda_verb alc883_acer_eapd_verbs[] = {
 	{ }
 };
 
-static struct hda_verb alc888_acer_aspire_7730G_verbs[] = {
-	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
-	{0x17, AC_VERB_SET_CONNECT_SEL, 0x02},
-	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
-	{ } /* end */
-};
-
 static void alc888_6st_dell_setup(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -10328,7 +10361,7 @@ static struct alc_config_preset alc882_presets[] = {
 		.const_channel_count = 6,
 		.input_mux = &alc883_capture_source,
 		.unsol_event = alc_automute_amp_unsol_event,
-		.setup = alc888_acer_aspire_6530g_setup,
+		.setup = alc888_acer_aspire_7730g_setup,
 		.init_hook = alc_automute_amp,
 	},
 	[ALC883_MEDION] = {

From c26a44ed1e552aaa1d4ceb71842002d235fe98d7 Mon Sep 17 00:00:00 2001
From: Justin Maggard <jmaggard10@gmail.com>
Date: Wed, 24 Nov 2010 16:36:17 +1100
Subject: [PATCH 0900/1066] md: fix return value of rdev_size_change()

When trying to grow an array by enlarging component devices,
rdev_size_store() expects the return value of rdev_size_change() to be
in sectors, but the actual value is returned in KBs.

This functionality was broken by commit
     dd8ac336c13fd8afdb082ebacb1cddd5cf727889
so this patch is suitable for any kernel since 2.6.30.

Cc: stable@kernel.org
Signed-off-by: Justin Maggard <jmaggard10@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 324a3663fcda..7b9e229a05e2 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1337,7 +1337,7 @@ super_90_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors)
 	md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size,
 		       rdev->sb_page);
 	md_super_wait(rdev->mddev);
-	return num_sectors / 2; /* kB for sysfs */
+	return num_sectors;
 }
 
 
@@ -1704,7 +1704,7 @@ super_1_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors)
 	md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size,
 		       rdev->sb_page);
 	md_super_wait(rdev->mddev);
-	return num_sectors / 2; /* kB for sysfs */
+	return num_sectors;
 }
 
 static struct super_type super_types[] = {

From 8f9e0ee38f75d4740daa9e42c8af628d33d19a02 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Wed, 24 Nov 2010 16:39:46 +1100
Subject: [PATCH 0901/1066] md/raid1: really fix recovery looping when single
 good device fails.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commit 4044ba58dd15cb01797c4fd034f39ef4a75f7cc3 supposedly fixed a
problem where if a raid1 with just one good device gets a read-error
during recovery, the recovery would abort and immediately restart in
an infinite loop.

However it depended on raid1_remove_disk removing the spare device
from the array.  But that does not happen in this case.  So add a test
so that in the 'recovery_disabled' case, the device will be removed.

This suitable for any kernel since 2.6.29 which is when
recovery_disabled was introduced.

Cc: stable@kernel.org
Reported-by: Sebastian Färber <faerber@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid1.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 45f8324196ec..845cf95b612c 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1161,6 +1161,7 @@ static int raid1_remove_disk(mddev_t *mddev, int number)
 		 * is not possible.
 		 */
 		if (!test_bit(Faulty, &rdev->flags) &&
+		    !mddev->recovery_disabled &&
 		    mddev->degraded < conf->raid_disks) {
 			err = -EBUSY;
 			goto abort;

From be20e6c67b6c6024c19094d3447f144d118733b0 Mon Sep 17 00:00:00 2001
From: "Darrick J. Wong" <djwong@us.ibm.com>
Date: Wed, 24 Nov 2010 16:40:33 +1100
Subject: [PATCH 0902/1066] md: Call blk_queue_flush() to establish flush/fua
 support

Before 2.6.37, the md layer had a mechanism for catching I/Os with the
barrier flag set, and translating the barrier into barriers for all
the underlying devices.  With 2.6.37, I/O barriers have become plain
old flushes, and the md code was updated to reflect this.  However,
one piece was left out -- the md layer does not tell the block layer
that it supports flushes or FUA access at all, which results in md
silently dropping flush requests.

Since the support already seems there, just add this one piece of
bookkeeping.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 7b9e229a05e2..84c46a161927 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4338,6 +4338,8 @@ static int md_alloc(dev_t dev, char *name)
 	if (mddev->kobj.sd &&
 	    sysfs_create_group(&mddev->kobj, &md_bitmap_group))
 		printk(KERN_DEBUG "pointless warning\n");
+
+	blk_queue_flush(mddev->queue, REQ_FLUSH | REQ_FUA);
  abort:
 	mutex_unlock(&disks_mutex);
 	if (!error && mddev->kobj.sd) {

From e8ee13a818db4954517cea7da6e7c15b9656eb00 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Fri, 19 Nov 2010 07:22:58 +0000
Subject: [PATCH 0903/1066] ARM: mach-shmobile: clock-sh7372: remove fsidiv
 bogus disable

Current FSIDIV clock framework had bogus disable.
This patch remove it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/clock-sh7372.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 7db31e6c6bf2..13226323e4e0 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -453,10 +453,8 @@ static int fsidiv_enable(struct clk *clk)
 	unsigned long value;
 
 	value  = __raw_readl(clk->mapping->base) >> 16;
-	if (value < 2) {
-		fsidiv_disable(clk);
+	if (value < 2)
 		return -ENOENT;
-	}
 
 	__raw_writel((value << 16) | 0x3, clk->mapping->base);
 
@@ -468,11 +466,6 @@ static int fsidiv_set_rate(struct clk *clk,
 {
 	int idx;
 
-	if (clk->parent->rate == rate) {
-		fsidiv_disable(clk);
-		return 0;
-	}
-
 	idx = (clk->parent->rate / rate) & 0xffff;
 	if (idx < 2)
 		return -ENOENT;

From d4bc99b977e3a1dd10a84a01ebe59ac2ccebf0cd Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Wed, 24 Nov 2010 02:44:06 +0000
Subject: [PATCH 0904/1066] ARM: mach-shmobile: ap4evb: FSI clock use proper
 process for HDMI

Current AP4 FSI set_rate function used bogus clock process
which didn't care enable/disable and clk->usecound.
To solve this issue, this patch also modify FSI driver to call
set_rate with enough options.
This patch modify it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ap4evb.c | 60 ++++++++++++++++++++-------
 arch/arm/mach-shmobile/clock-sh7372.c |  2 +-
 include/sound/sh_fsi.h                |  6 ++-
 sound/soc/sh/fsi.c                    | 19 ++++++++-
 4 files changed, 68 insertions(+), 19 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index d3260542b943..61c1068198ec 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -567,40 +567,72 @@ static struct platform_device *qhd_devices[] __initdata = {
 
 /* FSI */
 #define IRQ_FSI		evt2irq(0x1840)
+static int __fsi_set_rate(struct clk *clk, long rate, int enable)
+{
+	int ret = 0;
 
-static int fsi_set_rate(int is_porta, int rate)
+	if (rate <= 0)
+		return ret;
+
+	if (enable) {
+		ret = clk_set_rate(clk, clk_round_rate(clk, rate));
+		if (0 == ret)
+			ret = clk_enable(clk);
+	} else {
+		clk_disable(clk);
+	}
+
+	return ret;
+}
+
+static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
 {
 	struct clk *fsib_clk;
 	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+	long fsib_rate = 0;
+	long fdiv_rate = 0;
+	int ackmd_bpfmd;
 	int ret;
 
 	/* set_rate is not needed if port A */
 	if (is_porta)
 		return 0;
 
-	fsib_clk = clk_get(NULL, "fsib_clk");
-	if (IS_ERR(fsib_clk))
-		return -EINVAL;
-
 	switch (rate) {
 	case 44100:
-		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
-		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		fsib_rate	= rate * 256;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
 		break;
 	case 48000:
-		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
-		clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
-		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		fsib_rate	= 85428000; /* around 48kHz x 256 x 7 */
+		fdiv_rate	= rate * 256;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
 		break;
 	default:
 		pr_err("unsupported rate in FSI2 port B\n");
-		ret = -EINVAL;
-		break;
+		return -EINVAL;
 	}
 
-	clk_put(fsib_clk);
+	/* FSI B setting */
+	fsib_clk = clk_get(dev, "ickb");
+	if (IS_ERR(fsib_clk))
+		return -EIO;
 
-	return ret;
+	ret = __fsi_set_rate(fsib_clk, fsib_rate, enable);
+	clk_put(fsib_clk);
+	if (ret < 0)
+		return ret;
+
+	/* FSI DIV setting */
+	ret = __fsi_set_rate(fdiv_clk, fdiv_rate, enable);
+	if (ret < 0) {
+		/* disable FSI B */
+		if (enable)
+			__fsi_set_rate(fsib_clk, fsib_rate, 0);
+		return ret;
+	}
+
+	return ackmd_bpfmd;
 }
 
 static struct sh_fsi_platform_info fsi_info = {
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 13226323e4e0..4191e2921127 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -471,7 +471,7 @@ static int fsidiv_set_rate(struct clk *clk,
 		return -ENOENT;
 
 	__raw_writel(idx << 16, clk->mapping->base);
-	return fsidiv_enable(clk);
+	return 0;
 }
 
 static struct clk_ops fsidiv_clk_ops = {
diff --git a/include/sound/sh_fsi.h b/include/sound/sh_fsi.h
index fa60cbda90a4..d79894192ae3 100644
--- a/include/sound/sh_fsi.h
+++ b/include/sound/sh_fsi.h
@@ -85,7 +85,9 @@
  *     ACK_MD (FSI2)
  *     CKG1   (FSI)
  *
- * err:  return value < 0
+ * err		: return value <  0
+ * no change	: return value == 0
+ * change xMD	: return value >  0
  *
  * 0x-00000AB
  *
@@ -111,7 +113,7 @@
 struct sh_fsi_platform_info {
 	unsigned long porta_flags;
 	unsigned long portb_flags;
-	int (*set_rate)(int is_porta, int rate); /* for master mode */
+	int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 };
 
 #endif /* __SOUND_FSI_H */
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 507e709f2807..136414f163e9 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -132,6 +132,8 @@ struct fsi_priv {
 	struct fsi_stream playback;
 	struct fsi_stream capture;
 
+	long rate;
+
 	u32 mst_ctrl;
 };
 
@@ -854,10 +856,17 @@ static void fsi_dai_shutdown(struct snd_pcm_substream *substream,
 {
 	struct fsi_priv *fsi = fsi_get_priv(substream);
 	int is_play = fsi_is_play(substream);
+	struct fsi_master *master = fsi_get_master(fsi);
+	int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 
 	fsi_irq_disable(fsi, is_play);
 	fsi_clk_ctrl(fsi, 0);
 
+	set_rate = master->info->set_rate;
+	if (set_rate && fsi->rate)
+		set_rate(dai->dev, fsi_is_port_a(fsi), fsi->rate, 0);
+	fsi->rate = 0;
+
 	pm_runtime_put_sync(dai->dev);
 }
 
@@ -891,9 +900,10 @@ static int fsi_dai_hw_params(struct snd_pcm_substream *substream,
 {
 	struct fsi_priv *fsi = fsi_get_priv(substream);
 	struct fsi_master *master = fsi_get_master(fsi);
-	int (*set_rate)(int is_porta, int rate) = master->info->set_rate;
+	int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 	int fsi_ver = master->core->ver;
 	int is_play = fsi_is_play(substream);
+	long rate = params_rate(params);
 	int ret;
 
 	/* if slave mode, set_rate is not needed */
@@ -901,10 +911,15 @@ static int fsi_dai_hw_params(struct snd_pcm_substream *substream,
 		return 0;
 
 	/* it is error if no set_rate */
+	set_rate = master->info->set_rate;
 	if (!set_rate)
 		return -EIO;
 
-	ret = set_rate(fsi_is_port_a(fsi), params_rate(params));
+	ret = set_rate(dai->dev, fsi_is_port_a(fsi), rate, 1);
+	if (ret < 0) /* error */
+		return ret;
+
+	fsi->rate = rate;
 	if (ret > 0) {
 		u32 data = 0;
 

From 22de4e1fe446794acaebdf19dcaff4256d659972 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Fri, 19 Nov 2010 07:23:17 +0000
Subject: [PATCH 0905/1066] ARM: mach-shmobile: ap4evb: FSI clock use proper
 process for ak4642

Current AP4 FSI didn't use set_rate for ak4642,
and used dummy rate when init.
And FSI driver was modified to always call set_rate.

The user which are using FSI set_rate is only AP4 now.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ap4evb.c | 96 +++++++++++++++++++--------
 sound/soc/sh/fsi.c                    |  8 +--
 2 files changed, 68 insertions(+), 36 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 61c1068198ec..e084b423146e 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -575,7 +575,7 @@ static int __fsi_set_rate(struct clk *clk, long rate, int enable)
 		return ret;
 
 	if (enable) {
-		ret = clk_set_rate(clk, clk_round_rate(clk, rate));
+		ret = clk_set_rate(clk, rate);
 		if (0 == ret)
 			ret = clk_enable(clk);
 	} else {
@@ -585,7 +585,56 @@ static int __fsi_set_rate(struct clk *clk, long rate, int enable)
 	return ret;
 }
 
-static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
+static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
+{
+	return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable);
+}
+
+static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable)
+{
+	struct clk *fsia_ick;
+	struct clk *fsiack;
+	int ret = -EIO;
+
+	fsia_ick = clk_get(dev, "icka");
+	if (IS_ERR(fsia_ick))
+		return PTR_ERR(fsia_ick);
+
+	/*
+	 * FSIACK is connected to AK4642,
+	 * and use external clock pin from it.
+	 * it is parent of fsia_ick now.
+	 */
+	fsiack = clk_get_parent(fsia_ick);
+	if (!fsiack)
+		goto fsia_ick_out;
+
+	/*
+	 * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick
+	 *
+	 ** FIXME **
+	 * Because the freq_table of external clk (fsiack) are all 0,
+	 * the return value of clk_round_rate became 0.
+	 * So, it use __fsi_set_rate here.
+	 */
+	ret = __fsi_set_rate(fsiack, rate, enable);
+	if (ret < 0)
+		goto fsiack_out;
+
+	ret = __fsi_set_round_rate(fsia_ick, rate, enable);
+	if ((ret < 0) && enable)
+		__fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */
+
+fsiack_out:
+	clk_put(fsiack);
+
+fsia_ick_out:
+	clk_put(fsia_ick);
+
+	return 0;
+}
+
+static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
 {
 	struct clk *fsib_clk;
 	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
@@ -594,10 +643,6 @@ static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
 	int ackmd_bpfmd;
 	int ret;
 
-	/* set_rate is not needed if port A */
-	if (is_porta)
-		return 0;
-
 	switch (rate) {
 	case 44100:
 		fsib_rate	= rate * 256;
@@ -618,23 +663,35 @@ static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
 	if (IS_ERR(fsib_clk))
 		return -EIO;
 
-	ret = __fsi_set_rate(fsib_clk, fsib_rate, enable);
+	ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
 	clk_put(fsib_clk);
 	if (ret < 0)
 		return ret;
 
 	/* FSI DIV setting */
-	ret = __fsi_set_rate(fdiv_clk, fdiv_rate, enable);
+	ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
 	if (ret < 0) {
 		/* disable FSI B */
 		if (enable)
-			__fsi_set_rate(fsib_clk, fsib_rate, 0);
+			__fsi_set_round_rate(fsib_clk, fsib_rate, 0);
 		return ret;
 	}
 
 	return ackmd_bpfmd;
 }
 
+static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
+{
+	int ret;
+
+	if (is_porta)
+		ret = fsi_ak4642_set_rate(dev, rate, enable);
+	else
+		ret = fsi_hdmi_set_rate(dev, rate, enable);
+
+	return ret;
+}
+
 static struct sh_fsi_platform_info fsi_info = {
 	.porta_flags = SH_FSI_BRS_INV |
 		       SH_FSI_OUT_SLAVE_MODE |
@@ -928,23 +985,11 @@ out:
 
 device_initcall(hdmi_init_pm_clock);
 
-#define FSIACK_DUMMY_RATE 48000
 static int __init fsi_init_pm_clock(void)
 {
 	struct clk *fsia_ick;
 	int ret;
 
-	/*
-	 * FSIACK is connected to AK4642,
-	 * and the rate is depend on playing sound rate.
-	 * So, set dummy rate (= 48k) here
-	 */
-	ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
-	if (ret < 0) {
-		pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
-		return ret;
-	}
-
 	fsia_ick = clk_get(&fsi_device.dev, "icka");
 	if (IS_ERR(fsia_ick)) {
 		ret = PTR_ERR(fsia_ick);
@@ -953,16 +998,9 @@ static int __init fsi_init_pm_clock(void)
 	}
 
 	ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
-	if (ret < 0) {
-		pr_err("Cannot set FSI-A parent: %d\n", ret);
-		goto out;
-	}
-
-	ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
 	if (ret < 0)
-		pr_err("Cannot set FSI-A rate: %d\n", ret);
+		pr_err("Cannot set FSI-A parent: %d\n", ret);
 
-out:
 	clk_put(fsia_ick);
 
 	return ret;
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 136414f163e9..4c2404b1b862 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -902,18 +902,12 @@ static int fsi_dai_hw_params(struct snd_pcm_substream *substream,
 	struct fsi_master *master = fsi_get_master(fsi);
 	int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 	int fsi_ver = master->core->ver;
-	int is_play = fsi_is_play(substream);
 	long rate = params_rate(params);
 	int ret;
 
-	/* if slave mode, set_rate is not needed */
-	if (!fsi_is_master_mode(fsi, is_play))
-		return 0;
-
-	/* it is error if no set_rate */
 	set_rate = master->info->set_rate;
 	if (!set_rate)
-		return -EIO;
+		return 0;
 
 	ret = set_rate(dai->dev, fsi_is_port_a(fsi), rate, 1);
 	if (ret < 0) /* error */

From a57b1a9bdfb61e8d7dc7acc5e2d8bc04c549e668 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Fri, 19 Nov 2010 07:23:26 +0000
Subject: [PATCH 0906/1066] ARM: mach-shmobile: clock-sh7372: modify error code

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/clock-sh7372.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 4191e2921127..41663e0ca104 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -454,7 +454,7 @@ static int fsidiv_enable(struct clk *clk)
 
 	value  = __raw_readl(clk->mapping->base) >> 16;
 	if (value < 2)
-		return -ENOENT;
+		return -EIO;
 
 	__raw_writel((value << 16) | 0x3, clk->mapping->base);
 
@@ -468,7 +468,7 @@ static int fsidiv_set_rate(struct clk *clk,
 
 	idx = (clk->parent->rate / rate) & 0xffff;
 	if (idx < 2)
-		return -ENOENT;
+		return -EINVAL;
 
 	__raw_writel(idx << 16, clk->mapping->base);
 	return 0;

From b16a2892b9852839307894cc429b7a7b145138a7 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Fri, 19 Nov 2010 07:23:32 +0000
Subject: [PATCH 0907/1066] ARM: mach-shmobile: clock-sh7372: remove
 unnecessary fsi clocks

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/clock-sh7372.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 41663e0ca104..cbeca2849918 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -602,8 +602,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
 	CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
 	CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
-	CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]),
-	CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]),
 	CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
 	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
 	CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),

From 421b446abeec55bed1251fab80cb5c12be58b773 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Fri, 19 Nov 2010 07:23:52 +0000
Subject: [PATCH 0908/1066] ARM: mach-shmobile: clock-sh7372: remove bogus
 pllc2 clock toggling.

The PLLC2 clock was utilizing the same sort of enable/disable without
regard to usecount approach that the FSIDIV clock was when being used as
a PLL pass-through. This forces the enable/disable through the clock
framework, which now prevents the clock from being ripped out or modified
underneath users that have an existing handle on it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ap4evb.c |  5 +++++
 arch/arm/mach-shmobile/clock-sh7372.c | 12 ++----------
 2 files changed, 7 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index e084b423146e..d440e5f456ad 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -969,6 +969,11 @@ static int __init hdmi_init_pm_clock(void)
 		goto out;
 	}
 
+	ret = clk_enable(&sh7372_pllc2_clk);
+	if (ret < 0) {
+		pr_err("Cannot enable pllc2 clock\n");
+		goto out;
+	}
 	pr_debug("PLLC2 set frequency %lu\n", rate);
 
 	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index cbeca2849918..e18a1241a95e 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -230,21 +230,13 @@ static int pllc2_set_rate(struct clk *clk,
 	if (idx < 0)
 		return idx;
 
-	if (rate == clk->parent->rate) {
-		pllc2_disable(clk);
-		return 0;
-	}
+	if (rate == clk->parent->rate)
+		return -EINVAL;
 
 	value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
 
-	if (value & 0x80000000)
-		pllc2_disable(clk);
-
 	__raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR);
 
-	if (value & 0x80000000)
-		return pllc2_enable(clk);
-
 	return 0;
 }
 

From 8807236b1895b3aca022180cb9906022965344ad Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Fri, 19 Nov 2010 21:58:43 +0000
Subject: [PATCH 0909/1066] sisfb: delete obsolete PCI ROM bug workaround

Delete a workaround for a PCI ROM bug that has been fixed ages ago by
the commit 761a3ac08c63718dacde12aaf0ec6d6760e8c2b7.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sis/sis_main.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 3dde12b0ab06..1073b70dd857 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -4114,14 +4114,6 @@ sisfb_find_rom(struct pci_dev *pdev)
 			if(sisfb_check_rom(rom_base, ivideo)) {
 
 				if((myrombase = vmalloc(65536))) {
-
-					/* Work around bug in pci/rom.c: Folks forgot to check
-					 * whether the size retrieved from the BIOS image eventually
-					 * is larger than the mapped size
-					 */
-					if(pci_resource_len(pdev, PCI_ROM_RESOURCE) < romsize)
-						romsize = pci_resource_len(pdev, PCI_ROM_RESOURCE);
-
 					memcpy_fromio(myrombase, rom_base,
 							(romsize > 65536) ? 65536 : romsize);
 				}

From f3fff7359415f3e6331fa727ab27e9a1556ee7e7 Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Fri, 19 Nov 2010 21:58:44 +0000
Subject: [PATCH 0910/1066] sisfb: delete fallback code for pci_map_rom()

If pci_map_rom() fails, there is some fallback code that basically
duplicates pci_map_rom() on non-x86 platforms. No point in that.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sis/sis_main.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 1073b70dd857..7feb6992c7cc 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -4147,23 +4147,6 @@ sisfb_find_rom(struct pci_dev *pdev)
 
         }
 
-#else
-
-	pci_read_config_dword(pdev, PCI_ROM_ADDRESS, &temp);
-	pci_write_config_dword(pdev, PCI_ROM_ADDRESS,
-			(ivideo->video_base & PCI_ROM_ADDRESS_MASK) | PCI_ROM_ADDRESS_ENABLE);
-
-	rom_base = ioremap(ivideo->video_base, 65536);
-	if(rom_base) {
-		if(sisfb_check_rom(rom_base, ivideo)) {
-			if((myrombase = vmalloc(65536)))
-				memcpy_fromio(myrombase, rom_base, 65536);
-		}
-		iounmap(rom_base);
-	}
-
-	pci_write_config_dword(pdev, PCI_ROM_ADDRESS, temp);
-
 #endif
 
 	return myrombase;

From e7d828ab91c95e9fdc85f5167f236a8c85fb2445 Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Fri, 19 Nov 2010 21:58:45 +0000
Subject: [PATCH 0911/1066] sisfb: delete dead SIS_XORG_XF86 code

Delete code for compiling the driver for X.org/XFree86. The development
has forked, so there is no point keeping this code in the tree.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sis/init.c     | 537 -----------------------------------
 drivers/video/sis/init.h     |  40 ---
 drivers/video/sis/init301.c  | 162 -----------
 drivers/video/sis/init301.h  |  14 -
 drivers/video/sis/osdef.h    |  20 --
 drivers/video/sis/vgatypes.h |   9 -
 drivers/video/sis/vstruct.h  |   6 -
 7 files changed, 788 deletions(-)

diff --git a/drivers/video/sis/init.c b/drivers/video/sis/init.c
index c311ad3c3687..53e30ea56507 100644
--- a/drivers/video/sis/init.c
+++ b/drivers/video/sis/init.c
@@ -340,9 +340,7 @@ SiSInitPtr(struct SiS_Private *SiS_Pr)
 /*            HELPER: Get ModeID             */
 /*********************************************/
 
-#ifndef SIS_XORG_XF86
 static
-#endif
 unsigned short
 SiS_GetModeID(int VGAEngine, unsigned int VBFlags, int HDisplay, int VDisplay,
 		int Depth, bool FSTN, int LCDwidth, int LCDheight)
@@ -2999,11 +2997,6 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sho
    SiS_Pr->SiS_SelectCRT2Rate = 0;
    SiS_Pr->SiS_SetFlag &= (~ProgrammingCRT2);
 
-#ifdef SIS_XORG_XF86
-   xf86DrvMsgVerb(0, X_PROBED, 4, "(init: VBType=0x%04x, VBInfo=0x%04x)\n",
-                    SiS_Pr->SiS_VBType, SiS_Pr->SiS_VBInfo);
-#endif
-
    if(SiS_Pr->SiS_VBInfo & SetSimuScanMode) {
       if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) {
          SiS_Pr->SiS_SetFlag |= ProgrammingCRT2;
@@ -3202,74 +3195,12 @@ SiS_Handle760(struct SiS_Private *SiS_Pr)
 #endif
 }
 
-/*********************************************/
-/*      X.org/XFree86: SET SCREEN PITCH      */
-/*********************************************/
-
-#ifdef SIS_XORG_XF86
-static void
-SiS_SetPitchCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn)
-{
-   SISPtr pSiS = SISPTR(pScrn);
-   unsigned short HDisplay = pSiS->scrnPitch >> 3;
-
-   SiS_SetReg(SiS_Pr->SiS_P3d4,0x13,(HDisplay & 0xFF));
-   SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x0E,0xF0,(HDisplay >> 8));
-}
-
-static void
-SiS_SetPitchCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn)
-{
-   SISPtr pSiS = SISPTR(pScrn);
-   unsigned short HDisplay = pSiS->scrnPitch2 >> 3;
-
-    /* Unlock CRT2 */
-   if(pSiS->VGAEngine == SIS_315_VGA)
-      SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2F, 0x01);
-   else
-      SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x24, 0x01);
-
-   SiS_SetReg(SiS_Pr->SiS_Part1Port,0x07,(HDisplay & 0xFF));
-   SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x09,0xF0,(HDisplay >> 8));
-}
-
-static void
-SiS_SetPitch(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn)
-{
-   SISPtr pSiS = SISPTR(pScrn);
-   bool isslavemode = false;
-
-   if( (pSiS->VBFlags2 & VB2_VIDEOBRIDGE) &&
-       ( ((pSiS->VGAEngine == SIS_300_VGA) &&
-	  (SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0xa0) == 0x20) ||
-	 ((pSiS->VGAEngine == SIS_315_VGA) &&
-	  (SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x50) == 0x10) ) ) {
-      isslavemode = true;
-   }
-
-   /* We need to set pitch for CRT1 if bridge is in slave mode, too */
-   if((pSiS->VBFlags & DISPTYPE_DISP1) || (isslavemode)) {
-      SiS_SetPitchCRT1(SiS_Pr, pScrn);
-   }
-   /* We must not set the pitch for CRT2 if bridge is in slave mode */
-   if((pSiS->VBFlags & DISPTYPE_DISP2) && (!isslavemode)) {
-      SiS_SetPitchCRT2(SiS_Pr, pScrn);
-   }
-}
-#endif
-
 /*********************************************/
 /*                 SiSSetMode()              */
 /*********************************************/
 
-#ifdef SIS_XORG_XF86
-/* We need pScrn for setting the pitch correctly */
-bool
-SiSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, unsigned short ModeNo, bool dosetpitch)
-#else
 bool
 SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
-#endif
 {
    SISIOADDRESS BaseAddr = SiS_Pr->IOAddress;
    unsigned short RealModeNo, ModeIdIndex;
@@ -3301,9 +3232,6 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
    SiS_GetSysFlags(SiS_Pr);
 
    SiS_Pr->SiS_VGAINFO = 0x11;
-#if defined(SIS_XORG_XF86) && (defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__))
-   if(pScrn) SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff);
-#endif
 
 #ifdef SIS_LINUX_KERNEL
    KeepLockReg = SiS_GetReg(SiS_Pr->SiS_P3c4,0x05);
@@ -3424,18 +3352,6 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
       }
    }
 
-#ifdef SIS_XORG_XF86
-   if(pScrn) {
-      /* SetPitch: Adapt to virtual size & position */
-      if((ModeNo > 0x13) && (dosetpitch)) {
-	 SiS_SetPitch(SiS_Pr, pScrn);
-      }
-
-      /* Backup/Set ModeNo in BIOS scratch area */
-      SiS_GetSetModeID(pScrn, ModeNo);
-   }
-#endif
-
    SiS_CloseCRTC(SiS_Pr);
 
    SiS_Handle760(SiS_Pr);
@@ -3448,400 +3364,6 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
    return true;
 }
 
-/*********************************************/
-/*       X.org/XFree86: SiSBIOSSetMode()     */
-/*           for non-Dual-Head mode          */
-/*********************************************/
-
-#ifdef SIS_XORG_XF86
-bool
-SiSBIOSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-               DisplayModePtr mode, bool IsCustom)
-{
-   SISPtr pSiS = SISPTR(pScrn);
-   unsigned short ModeNo = 0;
-
-   SiS_Pr->UseCustomMode = false;
-
-   if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) {
-
-      xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, "Setting custom mode %dx%d\n",
-		SiS_Pr->CHDisplay,
-		(mode->Flags & V_INTERLACE ? SiS_Pr->CVDisplay * 2 :
-		   (mode->Flags & V_DBLSCAN ? SiS_Pr->CVDisplay / 2 :
-		      SiS_Pr->CVDisplay)));
-
-   } else {
-
-      /* Don't need vbflags here; checks done earlier */
-      ModeNo = SiS_GetModeNumber(pScrn, mode, pSiS->VBFlags);
-      if(!ModeNo) return false;
-
-      xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, "Setting standard mode 0x%x\n", ModeNo);
-
-   }
-
-   return(SiSSetMode(SiS_Pr, pScrn, ModeNo, true));
-}
-
-/*********************************************/
-/*    X.org/XFree86: SiSBIOSSetModeCRT2()    */
-/*           for Dual-Head modes             */
-/*********************************************/
-
-bool
-SiSBIOSSetModeCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-               DisplayModePtr mode, bool IsCustom)
-{
-   SISIOADDRESS BaseAddr = SiS_Pr->IOAddress;
-   SISPtr  pSiS = SISPTR(pScrn);
-#ifdef SISDUALHEAD
-   SISEntPtr pSiSEnt = pSiS->entityPrivate;
-#endif
-   unsigned short ModeIdIndex;
-   unsigned short ModeNo = 0;
-   unsigned char  backupreg = 0;
-
-   SiS_Pr->UseCustomMode = false;
-
-   /* Remember: Custom modes for CRT2 are ONLY supported
-    *     -) on the 30x/B/C, and
-    *     -) if CRT2 is LCD or VGA, or CRT1 is LCDA
-    */
-
-   if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) {
-
-	 ModeNo = 0xfe;
-
-   } else {
-
-	 ModeNo = SiS_GetModeNumber(pScrn, mode, pSiS->VBFlags);
-	 if(!ModeNo) return false;
-
-   }
-
-   SiSRegInit(SiS_Pr, BaseAddr);
-   SiSInitPtr(SiS_Pr);
-   SiS_GetSysFlags(SiS_Pr);
-#if defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__)
-   SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff);
-#else
-   SiS_Pr->SiS_VGAINFO = 0x11;
-#endif
-
-   SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86);
-
-   SiSInitPCIetc(SiS_Pr);
-   SiSSetLVDSetc(SiS_Pr);
-   SiSDetermineROMUsage(SiS_Pr);
-
-   /* Save mode info so we can set it from within SetMode for CRT1 */
-#ifdef SISDUALHEAD
-   if(pSiS->DualHeadMode) {
-      pSiSEnt->CRT2ModeNo = ModeNo;
-      pSiSEnt->CRT2DMode = mode;
-      pSiSEnt->CRT2IsCustom = IsCustom;
-      pSiSEnt->CRT2CR30 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30);
-      pSiSEnt->CRT2CR31 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x31);
-      pSiSEnt->CRT2CR35 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
-      pSiSEnt->CRT2CR38 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
-#if 0
-      /* We can't set CRT2 mode before CRT1 mode is set - says who...? */
-      if(pSiSEnt->CRT1ModeNo == -1) {
-	 xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-		"Setting CRT2 mode delayed until after setting CRT1 mode\n");
-	 return true;
-      }
-#endif
-      pSiSEnt->CRT2ModeSet = true;
-   }
-#endif
-
-   if(SiS_Pr->UseCustomMode) {
-
-      unsigned short temptemp = SiS_Pr->CVDisplay;
-
-      if(SiS_Pr->CModeFlag & DoubleScanMode)     temptemp >>= 1;
-      else if(SiS_Pr->CInfoFlag & InterlaceMode) temptemp <<= 1;
-
-      xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-	  "Setting custom mode %dx%d on CRT2\n",
-	  SiS_Pr->CHDisplay, temptemp);
-
-   } else {
-
-      xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-	  "Setting standard mode 0x%x on CRT2\n", ModeNo);
-
-   }
-
-   SiS_UnLockCRT2(SiS_Pr);
-
-   if(!SiS_Pr->UseCustomMode) {
-      if(!(SiS_SearchModeID(SiS_Pr, &ModeNo, &ModeIdIndex))) return false;
-   } else {
-      ModeIdIndex = 0;
-   }
-
-   SiS_GetVBType(SiS_Pr);
-
-   SiS_InitVB(SiS_Pr);
-   if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
-      if(SiS_Pr->ChipType >= SIS_315H) {
-	 SiS_ResetVB(SiS_Pr);
-	 SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x32,0x10);
-	 SiS_SetRegOR(SiS_Pr->SiS_Part2Port,0x00,0x0c);
-	 backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
-      } else {
-	 backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
-      }
-   }
-
-   /* Get VB information (connectors, connected devices) */
-   if(!SiS_Pr->UseCustomMode) {
-      SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 1);
-   } else {
-      /* If this is a custom mode, we don't check the modeflag for CRT2Mode */
-      SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 0);
-   }
-   SiS_SetYPbPr(SiS_Pr);
-   SiS_SetTVMode(SiS_Pr, ModeNo, ModeIdIndex);
-   SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex);
-   SiS_SetLowModeTest(SiS_Pr, ModeNo);
-
-   SiS_ResetSegmentRegisters(SiS_Pr);
-
-   /* Set mode on CRT2 */
-   if( (SiS_Pr->SiS_VBType & VB_SISVB)    ||
-       (SiS_Pr->SiS_IF_DEF_LVDS     == 1) ||
-       (SiS_Pr->SiS_IF_DEF_CH70xx   != 0) ||
-       (SiS_Pr->SiS_IF_DEF_TRUMPION != 0) ) {
-      SiS_SetCRT2Group(SiS_Pr, ModeNo);
-   }
-
-   SiS_StrangeStuff(SiS_Pr);
-
-   SiS_DisplayOn(SiS_Pr);
-   SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF);
-
-   if(SiS_Pr->ChipType >= SIS_315H) {
-      if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
-	 if(!(SiS_IsDualEdge(SiS_Pr))) {
-	    SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x13,0xfb);
-	 }
-      }
-   }
-
-   if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
-      if(SiS_Pr->ChipType >= SIS_315H) {
-	 if(!SiS_Pr->SiS_ROMNew) {
-	    if(SiS_IsVAMode(SiS_Pr)) {
-	       SiS_SetRegOR(SiS_Pr->SiS_P3d4,0x35,0x01);
-	    } else {
-	       SiS_SetRegAND(SiS_Pr->SiS_P3d4,0x35,0xFE);
-	    }
-	 }
-
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupreg);
-
-	 if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x30) & SetCRT2ToLCD) {
-	    SiS_SetRegAND(SiS_Pr->SiS_P3d4,0x38,0xfc);
-	 }
-      } else if((SiS_Pr->ChipType == SIS_630) ||
-	        (SiS_Pr->ChipType == SIS_730)) {
-         SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupreg);
-      }
-   }
-
-   /* SetPitch: Adapt to virtual size & position */
-   SiS_SetPitchCRT2(SiS_Pr, pScrn);
-
-   SiS_Handle760(SiS_Pr);
-
-   return true;
-}
-
-/*********************************************/
-/*    X.org/XFree86: SiSBIOSSetModeCRT1()    */
-/*           for Dual-Head modes             */
-/*********************************************/
-
-bool
-SiSBIOSSetModeCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-                   DisplayModePtr mode, bool IsCustom)
-{
-   SISIOADDRESS BaseAddr = SiS_Pr->IOAddress;
-   SISPtr  pSiS = SISPTR(pScrn);
-   unsigned short ModeIdIndex, ModeNo = 0;
-   unsigned char  backupreg = 0;
-#ifdef SISDUALHEAD
-   SISEntPtr pSiSEnt = pSiS->entityPrivate;
-   unsigned char  backupcr30, backupcr31, backupcr38, backupcr35, backupp40d=0;
-   bool backupcustom;
-#endif
-
-   SiS_Pr->UseCustomMode = false;
-
-   if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) {
-
-	 unsigned short temptemp = SiS_Pr->CVDisplay;
-
-	 if(SiS_Pr->CModeFlag & DoubleScanMode)     temptemp >>= 1;
-	 else if(SiS_Pr->CInfoFlag & InterlaceMode) temptemp <<= 1;
-
-	 xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-	 	"Setting custom mode %dx%d on CRT1\n",
-	 	SiS_Pr->CHDisplay, temptemp);
-	 ModeNo = 0xfe;
-
-   } else {
-
-	 ModeNo = SiS_GetModeNumber(pScrn, mode, 0); /* don't give VBFlags */
-	 if(!ModeNo) return false;
-
-	 xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-	 	"Setting standard mode 0x%x on CRT1\n", ModeNo);
-   }
-
-   SiSInitPtr(SiS_Pr);
-   SiSRegInit(SiS_Pr, BaseAddr);
-   SiS_GetSysFlags(SiS_Pr);
-#if defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__)
-   SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff);
-#else
-   SiS_Pr->SiS_VGAINFO = 0x11;
-#endif
-
-   SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86);
-
-   SiSInitPCIetc(SiS_Pr);
-   SiSSetLVDSetc(SiS_Pr);
-   SiSDetermineROMUsage(SiS_Pr);
-
-   SiS_UnLockCRT2(SiS_Pr);
-
-   if(!SiS_Pr->UseCustomMode) {
-      if(!(SiS_SearchModeID(SiS_Pr, &ModeNo, &ModeIdIndex))) return false;
-   } else {
-      ModeIdIndex = 0;
-   }
-
-   /* Determine VBType */
-   SiS_GetVBType(SiS_Pr);
-
-   SiS_InitVB(SiS_Pr);
-   if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
-      if(SiS_Pr->ChipType >= SIS_315H) {
-         backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
-      } else {
-         backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
-      }
-   }
-
-   /* Get VB information (connectors, connected devices) */
-   /* (We don't care if the current mode is a CRT2 mode) */
-   SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 0);
-   SiS_SetYPbPr(SiS_Pr);
-   SiS_SetTVMode(SiS_Pr, ModeNo, ModeIdIndex);
-   SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex);
-   SiS_SetLowModeTest(SiS_Pr, ModeNo);
-
-   SiS_OpenCRTC(SiS_Pr);
-
-   /* Set mode on CRT1 */
-   SiS_SetCRT1Group(SiS_Pr, ModeNo, ModeIdIndex);
-   if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) {
-      SiS_SetCRT2Group(SiS_Pr, ModeNo);
-   }
-
-   /* SetPitch: Adapt to virtual size & position */
-   SiS_SetPitchCRT1(SiS_Pr, pScrn);
-
-   SiS_HandleCRT1(SiS_Pr);
-
-   SiS_StrangeStuff(SiS_Pr);
-
-   SiS_CloseCRTC(SiS_Pr);
-
-#ifdef SISDUALHEAD
-   if(pSiS->DualHeadMode) {
-      pSiSEnt->CRT1ModeNo = ModeNo;
-      pSiSEnt->CRT1DMode = mode;
-   }
-#endif
-
-   if(SiS_Pr->UseCustomMode) {
-      SiS_Pr->CRT1UsesCustomMode = true;
-      SiS_Pr->CSRClock_CRT1 = SiS_Pr->CSRClock;
-      SiS_Pr->CModeFlag_CRT1 = SiS_Pr->CModeFlag;
-   } else {
-      SiS_Pr->CRT1UsesCustomMode = false;
-   }
-
-   /* Reset CRT2 if changing mode on CRT1 */
-#ifdef SISDUALHEAD
-   if(pSiS->DualHeadMode) {
-      if(pSiSEnt->CRT2ModeNo != -1) {
-	 xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-				"(Re-)Setting mode for CRT2\n");
-	 backupcustom = SiS_Pr->UseCustomMode;
-	 backupcr30 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30);
-	 backupcr31 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x31);
-	 backupcr35 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
-	 backupcr38 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
-	 if(SiS_Pr->SiS_VBType & VB_SISVB) {
-	    /* Backup LUT-enable */
-	    if(pSiSEnt->CRT2ModeSet) {
-	       backupp40d = SiS_GetReg(SiS_Pr->SiS_Part4Port,0x0d) & 0x08;
-	    }
-	 }
-	 if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) {
-	    SiS_SetReg(SiS_Pr->SiS_P3d4,0x30,pSiSEnt->CRT2CR30);
-	    SiS_SetReg(SiS_Pr->SiS_P3d4,0x31,pSiSEnt->CRT2CR31);
-	    SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,pSiSEnt->CRT2CR35);
-	    SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,pSiSEnt->CRT2CR38);
-	 }
-
-	 SiSBIOSSetModeCRT2(SiS_Pr, pSiSEnt->pScrn_1,
-			    pSiSEnt->CRT2DMode, pSiSEnt->CRT2IsCustom);
-
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x30,backupcr30);
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x31,backupcr31);
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupcr35);
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupcr38);
-	 if(SiS_Pr->SiS_VBType & VB_SISVB) {
-	    SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x0d, ~0x08, backupp40d);
-	 }
-	 SiS_Pr->UseCustomMode = backupcustom;
-      }
-   }
-#endif
-
-   /* Warning: From here, the custom mode entries in SiS_Pr are
-    * possibly overwritten
-    */
-
-   SiS_DisplayOn(SiS_Pr);
-   SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF);
-
-   if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
-      if(SiS_Pr->ChipType >= SIS_315H) {
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupreg);
-      } else if((SiS_Pr->ChipType == SIS_630) ||
-                (SiS_Pr->ChipType == SIS_730)) {
-         SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupreg);
-      }
-   }
-
-   SiS_Handle760(SiS_Pr);
-
-   /* Backup/Set ModeNo in BIOS scratch area */
-   SiS_GetSetModeID(pScrn,ModeNo);
-
-   return true;
-}
-#endif /* Linux_XF86 */
-
 #ifndef GETBITSTR
 #define BITMASK(h,l)    	(((unsigned)(1U << ((h)-(l)+1))-1)<<(l))
 #define GENMASK(mask)   	BITMASK(1?mask,0?mask)
@@ -4054,33 +3576,11 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    if(modeflag & DoubleScanMode) tempax |= 0x80;
    SiS_SetRegANDOR(SiS_Pr->SiS_P3d4,0x09,0x5F,tempax);
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO, "%d %d %d %d  %d %d %d %d  (%d %d %d %d)\n",
-	SiS_Pr->CHDisplay, SiS_Pr->CHSyncStart, SiS_Pr->CHSyncEnd, SiS_Pr->CHTotal,
-	SiS_Pr->CVDisplay, SiS_Pr->CVSyncStart, SiS_Pr->CVSyncEnd, SiS_Pr->CVTotal,
-	SiS_Pr->CHBlankStart, SiS_Pr->CHBlankEnd, SiS_Pr->CVBlankStart, SiS_Pr->CVBlankEnd);
-   xf86DrvMsg(0, X_INFO, " {{0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
-	SiS_Pr->CCRT1CRTC[0], SiS_Pr->CCRT1CRTC[1],
-	SiS_Pr->CCRT1CRTC[2], SiS_Pr->CCRT1CRTC[3],
-	SiS_Pr->CCRT1CRTC[4], SiS_Pr->CCRT1CRTC[5],
-	SiS_Pr->CCRT1CRTC[6], SiS_Pr->CCRT1CRTC[7]);
-   xf86DrvMsg(0, X_INFO, "   0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
-	SiS_Pr->CCRT1CRTC[8], SiS_Pr->CCRT1CRTC[9],
-	SiS_Pr->CCRT1CRTC[10], SiS_Pr->CCRT1CRTC[11],
-	SiS_Pr->CCRT1CRTC[12], SiS_Pr->CCRT1CRTC[13],
-	SiS_Pr->CCRT1CRTC[14], SiS_Pr->CCRT1CRTC[15]);
-   xf86DrvMsg(0, X_INFO, "   0x%02x}},\n", SiS_Pr->CCRT1CRTC[16]);
-#endif
-#endif
 }
 
 void
 SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata,
 			int xres, int yres,
-#ifdef SIS_XORG_XF86
-			DisplayModePtr current
-#endif
 #ifdef SIS_LINUX_KERNEL
 			struct fb_var_screeninfo *var, bool writeres
 #endif
@@ -4127,19 +3627,6 @@ SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata,
 
    D = B - F - C;
 
-#ifdef SIS_XORG_XF86
-   current->HDisplay   = (E * 8);
-   current->HSyncStart = (E * 8) + (F * 8);
-   current->HSyncEnd   = (E * 8) + (F * 8) + (C * 8);
-   current->HTotal     = (E * 8) + (F * 8) + (C * 8) + (D * 8);
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO,
-		"H: A %d B %d C %d D %d E %d F %d  HT %d HDE %d HRS %d HBS %d HBE %d HRE %d\n",
-		A, B, C, D, E, F, HT, HDE, HRS, HBS, HBE, HRE);
-#else
-   (void)VBS;  (void)HBS;  (void)A;
-#endif
-#endif
 #ifdef SIS_LINUX_KERNEL
    if(writeres) var->xres = xres = E * 8;
    var->left_margin = D * 8;
@@ -4192,24 +3679,6 @@ SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata,
 
    D = B - F - C;
 
-#ifdef SIS_XORG_XF86
-   current->VDisplay   = VDE + 1;
-   current->VSyncStart = VRS + 1;
-   current->VSyncEnd   = ((VRS & ~0x1f) | VRE) + 1;
-   if(VRE <= (VRS & 0x1f)) current->VSyncEnd += 32;
-   current->VTotal     = E + D + C + F;
-#if 0
-   current->VDisplay   = E;
-   current->VSyncStart = E + D;
-   current->VSyncEnd   = E + D + C;
-   current->VTotal     = E + D + C + F;
-#endif
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO,
-	"V: A %d B %d C %d D %d E %d F %d  VT %d VDE %d VRS %d VBS %d VBE %d VRE %d\n",
-	A, B, C, D, E, F, VT, VDE, VRS, VBS, VBE, VRE);
-#endif
-#endif
 #ifdef SIS_LINUX_KERNEL
    if(writeres) var->yres = yres = E;
    var->upper_margin = D;
@@ -4224,12 +3693,6 @@ SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata,
 	 * a negative D. The CRT controller does not
 	 * seem to like correcting HRE to 50)
 	 */
-#ifdef SIS_XORG_XF86
-      current->HDisplay   = 320;
-      current->HSyncStart = 328;
-      current->HSyncEnd   = 376;
-      current->HTotal     = 400;
-#endif
 #ifdef SIS_LINUX_KERNEL
       var->left_margin = (400 - 376);
       var->right_margin = (328 - 320);
diff --git a/drivers/video/sis/init.h b/drivers/video/sis/init.h
index b96005c39c67..4a75c73e134a 100644
--- a/drivers/video/sis/init.h
+++ b/drivers/video/sis/init.h
@@ -56,17 +56,6 @@
 #include "osdef.h"
 #include "initdef.h"
 
-#ifdef SIS_XORG_XF86
-#include "sis.h"
-#define SIS_NEED_inSISREG
-#define SIS_NEED_inSISREGW
-#define SIS_NEED_inSISREGL
-#define SIS_NEED_outSISREG
-#define SIS_NEED_outSISREGW
-#define SIS_NEED_outSISREGL
-#include "sis_regs.h"
-#endif
-
 #ifdef SIS_LINUX_KERNEL
 #include "vgatypes.h"
 #include "vstruct.h"
@@ -1521,10 +1510,6 @@ static const struct SiS_LVDSCRT1Data SiS_LVDSCRT1640x480_1_H[] =
 };
 
 bool		SiSInitPtr(struct SiS_Private *SiS_Pr);
-#ifdef SIS_XORG_XF86
-unsigned short	SiS_GetModeID(int VGAEngine, unsigned int VBFlags, int HDisplay, int VDisplay,
-				int Depth, bool FSTN, int LCDwith, int LCDheight);
-#endif
 unsigned short	SiS_GetModeID_LCD(int VGAEngine, unsigned int VBFlags, int HDisplay,
 				int VDisplay, int Depth, bool FSTN,
 				unsigned short CustomT, int LCDwith, int LCDheight,
@@ -1579,26 +1564,12 @@ unsigned short	SiS_GetFIFOThresholdB300(unsigned short idx1, unsigned short idx2
 unsigned short	SiS_GetLatencyFactor630(struct SiS_Private *SiS_Pr, unsigned short index);
 #endif
 void		SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex);
-#ifdef SIS_XORG_XF86
-bool		SiSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, unsigned short ModeNo,
-				bool dosetpitch);
-bool		SiSBIOSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-				DisplayModePtr mode, bool IsCustom);
-bool		SiSBIOSSetModeCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-				DisplayModePtr mode, bool IsCustom);
-bool		SiSBIOSSetModeCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-				DisplayModePtr mode, bool IsCustom);
-#endif
 #ifdef SIS_LINUX_KERNEL
 bool		SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
 #endif
 void		SiS_CalcCRRegisters(struct SiS_Private *SiS_Pr, int depth);
 void		SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 				unsigned short ModeIdIndex);
-#ifdef SIS_XORG_XF86
-void		SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, int xres,
-				int yres, DisplayModePtr current);
-#endif
 #ifdef SIS_LINUX_KERNEL
 void		SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, int xres,
 				int yres, struct fb_var_screeninfo *var, bool writeres);
@@ -1626,17 +1597,6 @@ extern unsigned short	SiS_GetVCLK2Ptr(struct SiS_Private *SiS_Pr, unsigned short
 extern bool		SiS_IsVAMode(struct SiS_Private *);
 extern bool		SiS_IsDualEdge(struct SiS_Private *);
 
-#ifdef SIS_XORG_XF86
-/* From other modules: */
-extern unsigned short	SiS_CheckBuildCustomMode(ScrnInfoPtr pScrn, DisplayModePtr mode,
-				unsigned int VBFlags);
-extern unsigned char	SiS_GetSetBIOSScratch(ScrnInfoPtr pScrn, unsigned short offset,
-				unsigned char value);
-extern unsigned char	SiS_GetSetModeID(ScrnInfoPtr pScrn, unsigned char id);
-extern unsigned short 	SiS_GetModeNumber(ScrnInfoPtr pScrn, DisplayModePtr mode,
-				unsigned int VBFlags);
-#endif
-
 #ifdef SIS_LINUX_KERNEL
 #ifdef SIS300
 extern unsigned int	sisfb_read_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg);
diff --git a/drivers/video/sis/init301.c b/drivers/video/sis/init301.c
index da33d801c22e..a4b344e2dea1 100644
--- a/drivers/video/sis/init301.c
+++ b/drivers/video/sis/init301.c
@@ -1166,12 +1166,6 @@ SiS_GetVBInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
       SiS_Pr->SiS_VBInfo, SiS_Pr->SiS_SetFlag);
 #endif
 #endif
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_PROBED, "(init301: VBInfo=0x%04x, SetFlag=0x%04x)\n",
-      SiS_Pr->SiS_VBInfo, SiS_Pr->SiS_SetFlag);
-#endif
-#endif
 }
 
 /*********************************************/
@@ -1415,12 +1409,6 @@ SiS_SetTVMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
    }
 
    SiS_Pr->SiS_VBInfo &= ~SetPALTV;
-
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO, "(init301: TVMode %x, VBInfo %x)\n", SiS_Pr->SiS_TVMode, SiS_Pr->SiS_VBInfo);
-#endif
-#endif
 }
 
 /*********************************************/
@@ -1447,18 +1435,6 @@ SiS_GetLCDInfoBIOS(struct SiS_Private *SiS_Pr)
    unsigned char  *ROMAddr;
    unsigned short temp;
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO, "Paneldata driver: [%d %d] [H %d %d] [V %d %d] [C %d 0x%02x 0x%02x]\n",
-	SiS_Pr->PanelHT, SiS_Pr->PanelVT,
-	SiS_Pr->PanelHRS, SiS_Pr->PanelHRE,
-	SiS_Pr->PanelVRS, SiS_Pr->PanelVRE,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].CLOCK,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_A,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_B);
-#endif
-#endif
-
    if((ROMAddr = GetLCDStructPtr661(SiS_Pr))) {
       if((temp = SISGETROMW(6)) != SiS_Pr->PanelHT) {
 	 SiS_Pr->SiS_NeedRomModeData = true;
@@ -1480,18 +1456,6 @@ SiS_GetLCDInfoBIOS(struct SiS_Private *SiS_Pr)
       SiS_Pr->SiS_VCLKData[VCLK_CUSTOM_315].SR2C =
 	 SiS_Pr->SiS_VBVCLKData[VCLK_CUSTOM_315].Part4_B = ROMAddr[20];
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-      xf86DrvMsg(0, X_INFO, "Paneldata BIOS:  [%d %d] [H %d %d] [V %d %d] [C %d 0x%02x 0x%02x]\n",
-	SiS_Pr->PanelHT, SiS_Pr->PanelVT,
-	SiS_Pr->PanelHRS, SiS_Pr->PanelHRE,
-	SiS_Pr->PanelVRS, SiS_Pr->PanelVRE,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].CLOCK,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_A,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_B);
-#endif
-#endif
-
    }
 #endif
 }
@@ -2192,11 +2156,6 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh
 	SiS_Pr->SiS_LCDInfo, SiS_Pr->SiS_LCDResInfo, SiS_Pr->SiS_LCDTypeInfo);
 #endif
 #endif
-#ifdef SIS_XORG_XF86
-  xf86DrvMsgVerb(0, X_PROBED, 4,
-	"(init301: LCDInfo=0x%04x LCDResInfo=0x%02x LCDTypeInfo=0x%02x SetFlag=0x%04x)\n",
-	SiS_Pr->SiS_LCDInfo, SiS_Pr->SiS_LCDResInfo, SiS_Pr->SiS_LCDTypeInfo, SiS_Pr->SiS_SetFlag);
-#endif
 }
 
 /*********************************************/
@@ -2410,12 +2369,6 @@ SiS_GetVCLK2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor
 
   }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-  xf86DrvMsg(0, X_INFO, "VCLKIndex %d (0x%x)\n", VCLKIndex, VCLKIndex);
-#endif
-#endif
-
   return VCLKIndex;
 }
 
@@ -3527,12 +3480,6 @@ SiS_GetCRT2Data301(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
 	      default                  : LCDPtr = SiS_Pr->SiS_ExtLCD1024x768Data;   break;
 	   }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-	   xf86DrvMsg(0, X_INFO, "GetCRT2Data: Index %d ResIndex %d\n", CRT2Index, ResIndex);
-#endif
-#endif
-
 	   SiS_Pr->SiS_RVBHCMAX  = (LCDPtr+ResIndex)->RVBHCMAX;
 	   SiS_Pr->SiS_RVBHCFACT = (LCDPtr+ResIndex)->RVBHCFACT;
 	   SiS_Pr->SiS_VGAHT     = (LCDPtr+ResIndex)->VGAHT;
@@ -3891,11 +3838,6 @@ SiS_HandlePWD(struct SiS_Private *SiS_Pr)
 	 ret = 1;
       }
       SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x27,0x7f,temp);
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-      xf86DrvMsg(0, 0, "Setting PWD %x\n", temp);
-#endif
-#endif
    }
 #endif
    return ret;
@@ -5420,27 +5362,6 @@ SiS_SetGroup1_301(struct SiS_Private *SiS_Pr, unsigned short ModeNo,unsigned sho
 
   temp = SiS_GetRegByte((SiS_Pr->SiS_P3ca+0x02));
   SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1b,temp);			/* ? */
-
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO, "%d %d %d %d  %d %d %d %d  (%d %d %d %d)\n",
-	SiS_Pr->CHDisplay, SiS_Pr->CHSyncStart, SiS_Pr->CHSyncEnd, SiS_Pr->CHTotal,
-	SiS_Pr->CVDisplay, SiS_Pr->CVSyncStart, SiS_Pr->CVSyncEnd, SiS_Pr->CVTotal,
-	SiS_Pr->CHBlankStart, SiS_Pr->CHBlankEnd, SiS_Pr->CVBlankStart, SiS_Pr->CVBlankEnd);
-
-   xf86DrvMsg(0, X_INFO, " {{0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
-	SiS_Pr->CCRT1CRTC[0], SiS_Pr->CCRT1CRTC[1],
-	SiS_Pr->CCRT1CRTC[2], SiS_Pr->CCRT1CRTC[3],
-	SiS_Pr->CCRT1CRTC[4], SiS_Pr->CCRT1CRTC[5],
-	SiS_Pr->CCRT1CRTC[6], SiS_Pr->CCRT1CRTC[7]);
-   xf86DrvMsg(0, X_INFO, "   0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
-	SiS_Pr->CCRT1CRTC[8], SiS_Pr->CCRT1CRTC[9],
-	SiS_Pr->CCRT1CRTC[10], SiS_Pr->CCRT1CRTC[11],
-	SiS_Pr->CCRT1CRTC[12], SiS_Pr->CCRT1CRTC[13],
-	SiS_Pr->CCRT1CRTC[14], SiS_Pr->CCRT1CRTC[15]);
-   xf86DrvMsg(0, X_INFO, "   0x%02x}},\n", SiS_Pr->CCRT1CRTC[16]);
-#endif
-#endif
 }
 
 /* Setup panel link
@@ -7130,12 +7051,6 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
     /* Non-expanding: lcdvdes = tempcx = VT-1; lcdvdee = tempbx = VDE-1 */
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdvdes 0x%x lcdvdee 0x%x\n", tempcx, tempbx);
-#endif
-#endif
-
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x05,tempcx);	/* lcdvdes  */
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x06,tempbx);	/* lcdvdee  */
 
@@ -7184,12 +7099,6 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
        tempbx = SiS_Pr->CVSyncStart;
     }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdvrs 0x%x\n", tempbx);
-#endif
-#endif
-
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x04,tempbx);	    /* lcdvrs */
 
     temp = (tempbx >> 4) & 0xF0;
@@ -7201,12 +7110,6 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
        temp |= (SiS_Pr->CVSyncEnd & 0x0f);
     }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdvre[3:0] 0x%x\n", (temp & 0x0f));
-#endif
-#endif
-
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,temp);
 
 #ifdef SIS300
@@ -7245,12 +7148,6 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
        tempax >>= 1;
     }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdhdee 0x%x\n", tempbx);
-#endif
-#endif
-
     tempbx += bridgeoffset;
 
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x23,tempbx);	    /* lcdhdee */
@@ -7276,12 +7173,6 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
        tempbx += bridgeoffset;
     }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdhrs 0x%x\n", tempbx);
-#endif
-#endif
-
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x1C,tempbx);	    /* lcdhrs */
     SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x1D,0x0F,((tempbx >> 4) & 0xf0));
 
@@ -7300,12 +7191,6 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
        tempbx += bridgeoffset;
     }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdhre 0x%x\n", tempbx);
-#endif
-#endif
-
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x21,tempbx);	    /* lcdhre */
 
     SiS_SetGroup2_Tail(SiS_Pr, ModeNo);
@@ -8703,16 +8588,6 @@ SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
       SiS_GetLVDSDesData(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
    }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-  xf86DrvMsg(0, X_INFO, "(init301: LCDHDES 0x%03x LCDVDES 0x%03x)\n", SiS_Pr->SiS_LCDHDES, SiS_Pr->SiS_LCDVDES);
-  xf86DrvMsg(0, X_INFO, "(init301: HDE     0x%03x VDE     0x%03x)\n", SiS_Pr->SiS_HDE, SiS_Pr->SiS_VDE);
-  xf86DrvMsg(0, X_INFO, "(init301: VGAHDE  0x%03x VGAVDE  0x%03x)\n", SiS_Pr->SiS_VGAHDE, SiS_Pr->SiS_VGAVDE);
-  xf86DrvMsg(0, X_INFO, "(init301: HT      0x%03x VT      0x%03x)\n", SiS_Pr->SiS_HT, SiS_Pr->SiS_VT);
-  xf86DrvMsg(0, X_INFO, "(init301: VGAHT   0x%03x VGAVT   0x%03x)\n", SiS_Pr->SiS_VGAHT, SiS_Pr->SiS_VGAVT);
-#endif
-#endif
-
    if(SiS_Pr->SiS_SetFlag & LowModeTests) {
       SiS_SetGroup1(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
    }
@@ -8923,11 +8798,6 @@ SiS_SetTrumpionBlock(struct SiS_Private *SiS_Pr, unsigned char *dataptr)
      dataptr = SiS_SetTrumpBlockLoop(SiS_Pr, dataptr);
      if(!dataptr) return false;
   }
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-  xf86DrvMsg(0, X_INFO, "Trumpion block success\n");
-#endif
-#endif
   return true;
 }
 #endif
@@ -9114,9 +8984,7 @@ SiS_SetCH70xxANDOR(struct SiS_Private *SiS_Pr, unsigned short reg,
 }
 
 /* Our own DDC functions */
-#ifndef SIS_XORG_XF86
 static
-#endif
 unsigned short
 SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags, int VGAEngine,
                 unsigned short adaptnum, unsigned short DDCdatatype, bool checkcr32,
@@ -9224,12 +9092,6 @@ SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags, int VGAEngine,
 
     SiS_SetupDDCN(SiS_Pr);
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "DDC Port %x Index %x Shift %d\n",
-    		SiS_Pr->SiS_DDC_Port, SiS_Pr->SiS_DDC_Index, temp);
-#endif
-#endif
     return 0;
 }
 
@@ -9292,11 +9154,6 @@ SiS_DoProbeDDC(struct SiS_Private *SiS_Pr)
     SiS_SetSwitchDDC2(SiS_Pr);
     if(SiS_PrepareDDC(SiS_Pr)) {
          SiS_SetStop(SiS_Pr);
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-         xf86DrvMsg(0, X_INFO, "Probe: Prepare failed\n");
-#endif
-#endif
          return 0xFFFF;
     }
     mask = 0xf0;
@@ -9310,11 +9167,6 @@ SiS_DoProbeDDC(struct SiS_Private *SiS_Pr)
        } else {
            failed = true;
 	   ret = 0xFFFF;
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-           xf86DrvMsg(0, X_INFO, "Probe: Read 1 failed\n");
-#endif
-#endif
        }
     }
     if(!failed) {
@@ -9324,11 +9176,6 @@ SiS_DoProbeDDC(struct SiS_Private *SiS_Pr)
        if(temp == value) ret = 0;
        else {
           ret = 0xFFFF;
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-          xf86DrvMsg(0, X_INFO, "Probe: Read 2 failed\n");
-#endif
-#endif
           if(SiS_Pr->SiS_DDC_DeviceAddr == 0xa0) {
              if(temp == 0x30) ret = 0;
           }
@@ -9338,9 +9185,7 @@ SiS_DoProbeDDC(struct SiS_Private *SiS_Pr)
     return ret;
 }
 
-#ifndef SIS_XORG_XF86
 static
-#endif
 unsigned short
 SiS_ProbeDDC(struct SiS_Private *SiS_Pr)
 {
@@ -9357,9 +9202,7 @@ SiS_ProbeDDC(struct SiS_Private *SiS_Pr)
    return flag;
 }
 
-#ifndef SIS_XORG_XF86
 static
-#endif
 unsigned short
 SiS_ReadDDC(struct SiS_Private *SiS_Pr, unsigned short DDCdatatype, unsigned char *buffer)
 {
@@ -9606,11 +9449,6 @@ SiS_SetSCLKHigh(struct SiS_Private *SiS_Pr)
     temp = SiS_GetReg(SiS_Pr->SiS_DDC_Port,SiS_Pr->SiS_DDC_Index);
   } while((!(temp & SiS_Pr->SiS_DDC_Clk)) && --watchdog);
   if (!watchdog) {
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-        xf86DrvMsg(0, X_INFO, "SetClkHigh failed\n");
-#endif
-#endif
   	return 0xFFFF;
   }
   SiS_DDC2Delay(SiS_Pr,SiS_I2CDELAYSHORT);
diff --git a/drivers/video/sis/init301.h b/drivers/video/sis/init301.h
index 51d99222375d..c379dc7a9973 100644
--- a/drivers/video/sis/init301.h
+++ b/drivers/video/sis/init301.h
@@ -56,11 +56,6 @@
 #include "osdef.h"
 #include "initdef.h"
 
-#ifdef SIS_XORG_XF86
-#include "sis.h"
-#include "sis_regs.h"
-#endif
-
 #ifdef SIS_LINUX_KERNEL
 #include "vgatypes.h"
 #include "vstruct.h"
@@ -412,21 +407,12 @@ unsigned short	SiS_HandleDDC(struct SiS_Private *SiS_Pr, unsigned int VBFlags, i
 			unsigned short adaptnum, unsigned short DDCdatatype,
 			unsigned char *buffer, unsigned int VBFlags2);
 
-#ifdef SIS_XORG_XF86
-unsigned short		SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags,
-				int VGAEngine, unsigned short adaptnum, unsigned short DDCdatatype,
-				bool checkcr32, unsigned int VBFlags2);
-unsigned short		SiS_ProbeDDC(struct SiS_Private *SiS_Pr);
-unsigned short		SiS_ReadDDC(struct SiS_Private *SiS_Pr, unsigned short DDCdatatype,
-				unsigned char *buffer);
-#else
 static unsigned short	SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags,
 				int VGAEngine, unsigned short adaptnum, unsigned short DDCdatatype,
 				bool checkcr32, unsigned int VBFlags2);
 static unsigned short	SiS_ProbeDDC(struct SiS_Private *SiS_Pr);
 static unsigned short	SiS_ReadDDC(struct SiS_Private *SiS_Pr, unsigned short DDCdatatype,
 				unsigned char *buffer);
-#endif
 static void		SiS_SetSwitchDDC2(struct SiS_Private *SiS_Pr);
 static unsigned short	SiS_SetStart(struct SiS_Private *SiS_Pr);
 static unsigned short	SiS_SetStop(struct SiS_Private *SiS_Pr);
diff --git a/drivers/video/sis/osdef.h b/drivers/video/sis/osdef.h
index 6ff8f988a1a7..e24d21a7ae4b 100644
--- a/drivers/video/sis/osdef.h
+++ b/drivers/video/sis/osdef.h
@@ -56,7 +56,6 @@
 
 /* The choices are: */
 #define SIS_LINUX_KERNEL		/* Linux kernel framebuffer */
-#undef  SIS_XORG_XF86			/* XFree86/X.org */
 
 #ifdef OutPortByte
 #undef OutPortByte
@@ -111,23 +110,4 @@
 
 #endif /* LINUX_KERNEL */
 
-/**********************************************************************/
-/*  XFree86/X.org                                                    */
-/**********************************************************************/
-
-#ifdef SIS_XORG_XF86
-
-#define SIS300
-#define SIS315H
-
-#define OutPortByte(p,v) outSISREG((IOADDRESS)(p),(CARD8)(v))
-#define OutPortWord(p,v) outSISREGW((IOADDRESS)(p),(CARD16)(v))
-#define OutPortLong(p,v) outSISREGL((IOADDRESS)(p),(CARD32)(v))
-#define InPortByte(p)    inSISREG((IOADDRESS)(p))
-#define InPortWord(p)    inSISREGW((IOADDRESS)(p))
-#define InPortLong(p)    inSISREGL((IOADDRESS)(p))
-#define SiS_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize)
-
-#endif /* XF86 */
-
 #endif  /* _OSDEF_H_ */
diff --git a/drivers/video/sis/vgatypes.h b/drivers/video/sis/vgatypes.h
index 81a22eaabfde..f499062bba94 100644
--- a/drivers/video/sis/vgatypes.h
+++ b/drivers/video/sis/vgatypes.h
@@ -62,15 +62,6 @@ typedef unsigned long SISIOADDRESS;
 #define SISIOMEMTYPE __iomem
 #endif
 
-#ifdef SIS_XORG_XF86
-#if XF86_VERSION_CURRENT < XF86_VERSION_NUMERIC(4,2,0,0,0)
-typedef unsigned long IOADDRESS;
-typedef unsigned long SISIOADDRESS;
-#else
-typedef IOADDRESS SISIOADDRESS;
-#endif
-#endif
-
 typedef enum _SIS_CHIP_TYPE {
     SIS_VGALegacy = 0,
     SIS_530,
diff --git a/drivers/video/sis/vstruct.h b/drivers/video/sis/vstruct.h
index bef4aae388d0..a860039c1122 100644
--- a/drivers/video/sis/vstruct.h
+++ b/drivers/video/sis/vstruct.h
@@ -233,9 +233,6 @@ struct SiS_Private
 {
 	unsigned char			ChipType;
 	unsigned char			ChipRevision;
-#ifdef SIS_XORG_XF86
-	PCITAG				PciTag;
-#endif
 #ifdef SIS_LINUX_KERNEL
 	void				*ivideo;
 #endif
@@ -280,9 +277,6 @@ struct SiS_Private
 	unsigned short			SiS_IF_DEF_FSTN;
 	unsigned short			SiS_SysFlags;
 	unsigned char			SiS_VGAINFO;
-#ifdef SIS_XORG_XF86
-	unsigned short			SiS_CP1, SiS_CP2, SiS_CP3, SiS_CP4;
-#endif
 	bool				SiS_UseROM;
 	bool				SiS_ROMNew;
 	bool				SiS_XGIROM;

From b6c30ca6136c6c6900a086b6b843f738a588a2f3 Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Fri, 19 Nov 2010 21:58:46 +0000
Subject: [PATCH 0912/1066] sisfb: delete redudant #define SIS_LINUX_KERNEL

It's not needed anymore with SIS_XORG_XF86 gone.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sis/init.c     | 50 ------------------------------------
 drivers/video/sis/init.h     | 14 ----------
 drivers/video/sis/init301.c  | 23 -----------------
 drivers/video/sis/init301.h  | 14 ----------
 drivers/video/sis/osdef.h    |  7 -----
 drivers/video/sis/vgatypes.h |  2 --
 drivers/video/sis/vstruct.h  |  6 -----
 7 files changed, 116 deletions(-)

diff --git a/drivers/video/sis/init.c b/drivers/video/sis/init.c
index 53e30ea56507..5634dfb46624 100644
--- a/drivers/video/sis/init.c
+++ b/drivers/video/sis/init.c
@@ -1150,9 +1150,7 @@ SiSInitPCIetc(struct SiS_Private *SiS_Pr)
 /*             HELPER: SetLVDSetc            */
 /*********************************************/
 
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 void
 SiSSetLVDSetc(struct SiS_Private *SiS_Pr)
 {
@@ -1418,9 +1416,7 @@ SiS_ResetSegmentRegisters(struct SiS_Private *SiS_Pr)
 /*             HELPER: GetVBType             */
 /*********************************************/
 
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 void
 SiS_GetVBType(struct SiS_Private *SiS_Pr)
 {
@@ -1485,7 +1481,6 @@ SiS_GetVBType(struct SiS_Private *SiS_Pr)
 /*           HELPER: Check RAM size          */
 /*********************************************/
 
-#ifdef SIS_LINUX_KERNEL
 static bool
 SiS_CheckMemorySize(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 		unsigned short ModeIdIndex)
@@ -1499,7 +1494,6 @@ SiS_CheckMemorySize(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    if(AdapterMemSize < memorysize) return false;
    return true;
 }
-#endif
 
 /*********************************************/
 /*           HELPER: Get DRAM type           */
@@ -1572,7 +1566,6 @@ SiS_GetMCLK(struct SiS_Private *SiS_Pr)
 /*           HELPER: ClearBuffer             */
 /*********************************************/
 
-#ifdef SIS_LINUX_KERNEL
 static void
 SiS_ClearBuffer(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 {
@@ -1597,7 +1590,6 @@ SiS_ClearBuffer(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
       SiS_SetMemory(memaddr, 0x8000, 0);
    }
 }
-#endif
 
 /*********************************************/
 /*           HELPER: SearchModeID            */
@@ -2504,11 +2496,7 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x09,0x80,data);
 
   /* Write foreground and background queue */
-#ifdef SIS_LINUX_KERNEL
    templ = sisfb_read_nbridge_pci_dword(SiS_Pr, 0x50);
-#else
-   templ = pciReadLong(0x00000000, 0x50);
-#endif
 
    if(SiS_Pr->ChipType == SIS_730) {
 
@@ -2528,13 +2516,8 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
    }
 
-#ifdef SIS_LINUX_KERNEL
    sisfb_write_nbridge_pci_dword(SiS_Pr, 0x50, templ);
    templ = sisfb_read_nbridge_pci_dword(SiS_Pr, 0xA0);
-#else
-   pciWriteLong(0x00000000, 0x50, templ);
-   templ = pciReadLong(0x00000000, 0xA0);
-#endif
 
    /* GUI grant timer (PCI config 0xA3) */
    if(SiS_Pr->ChipType == SIS_730) {
@@ -2550,11 +2533,7 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
    }
 
-#ifdef SIS_LINUX_KERNEL
    sisfb_write_nbridge_pci_dword(SiS_Pr, 0xA0, templ);
-#else
-   pciWriteLong(0x00000000, 0xA0, templ);
-#endif
 }
 #endif /* SIS300 */
 
@@ -3063,11 +3042,9 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sho
 
    SiS_LoadDAC(SiS_Pr, ModeNo, ModeIdIndex);
 
-#ifdef SIS_LINUX_KERNEL
    if(SiS_Pr->SiS_flag_clearbuffer) {
       SiS_ClearBuffer(SiS_Pr, ModeNo);
    }
-#endif
 
    if(!(SiS_Pr->SiS_VBInfo & (SetSimuScanMode | SwitchCRT2 | SetCRT2ToLCDA))) {
       SiS_WaitRetrace1(SiS_Pr);
@@ -3163,11 +3140,7 @@ SiS_Handle760(struct SiS_Private *SiS_Pr)
        (!(SiS_Pr->SiS_SysFlags & SF_760UMA)) )
       return;
 
-#ifdef SIS_LINUX_KERNEL
    somebase = sisfb_read_mio_pci_word(SiS_Pr, 0x74);
-#else
-   somebase = pciReadWord(0x00001000, 0x74);
-#endif
    somebase &= 0xffff;
 
    if(somebase == 0) return;
@@ -3183,13 +3156,8 @@ SiS_Handle760(struct SiS_Private *SiS_Pr)
       temp2 = 0x0b;
    }
 
-#ifdef SIS_LINUX_KERNEL
    sisfb_write_nbridge_pci_byte(SiS_Pr, 0x7e, temp1);
    sisfb_write_nbridge_pci_byte(SiS_Pr, 0x8d, temp2);
-#else
-   pciWriteByte(0x00000000, 0x7e, temp1);
-   pciWriteByte(0x00000000, 0x8d, temp2);
-#endif
 
    SiS_SetRegByte((somebase + 0x85), temp3);
 #endif
@@ -3205,21 +3173,17 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
    SISIOADDRESS BaseAddr = SiS_Pr->IOAddress;
    unsigned short RealModeNo, ModeIdIndex;
    unsigned char  backupreg = 0;
-#ifdef SIS_LINUX_KERNEL
    unsigned short KeepLockReg;
 
    SiS_Pr->UseCustomMode = false;
    SiS_Pr->CRT1UsesCustomMode = false;
-#endif
 
    SiS_Pr->SiS_flag_clearbuffer = 0;
 
    if(SiS_Pr->UseCustomMode) {
       ModeNo = 0xfe;
    } else {
-#ifdef SIS_LINUX_KERNEL
       if(!(ModeNo & 0x80)) SiS_Pr->SiS_flag_clearbuffer = 1;
-#endif
       ModeNo &= 0x7f;
    }
 
@@ -3233,9 +3197,7 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 
    SiS_Pr->SiS_VGAINFO = 0x11;
 
-#ifdef SIS_LINUX_KERNEL
    KeepLockReg = SiS_GetReg(SiS_Pr->SiS_P3c4,0x05);
-#endif
    SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86);
 
    SiSInitPCIetc(SiS_Pr);
@@ -3272,12 +3234,10 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
    SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex);
    SiS_SetLowModeTest(SiS_Pr, ModeNo);
 
-#ifdef SIS_LINUX_KERNEL
    /* Check memory size (kernel framebuffer driver only) */
    if(!SiS_CheckMemorySize(SiS_Pr, ModeNo, ModeIdIndex)) {
       return false;
    }
-#endif
 
    SiS_OpenCRTC(SiS_Pr);
 
@@ -3356,10 +3316,8 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 
    SiS_Handle760(SiS_Pr);
 
-#ifdef SIS_LINUX_KERNEL
    /* We never lock registers in XF86 */
    if(KeepLockReg != 0xA1) SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x00);
-#endif
 
    return true;
 }
@@ -3581,9 +3539,7 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 void
 SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata,
 			int xres, int yres,
-#ifdef SIS_LINUX_KERNEL
 			struct fb_var_screeninfo *var, bool writeres
-#endif
 )
 {
    unsigned short HRE, HBE, HRS, HBS, HDE, HT;
@@ -3627,12 +3583,10 @@ SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata,
 
    D = B - F - C;
 
-#ifdef SIS_LINUX_KERNEL
    if(writeres) var->xres = xres = E * 8;
    var->left_margin = D * 8;
    var->right_margin = F * 8;
    var->hsync_len = C * 8;
-#endif
 
    /* Vertical */
    sr_data = crdata[13];
@@ -3679,12 +3633,10 @@ SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata,
 
    D = B - F - C;
 
-#ifdef SIS_LINUX_KERNEL
    if(writeres) var->yres = yres = E;
    var->upper_margin = D;
    var->lower_margin = F;
    var->vsync_len = C;
-#endif
 
    if((xres == 320) && ((yres == 200) || (yres == 240))) {
 	/* Terrible hack, but correct CRTC data for
@@ -3693,11 +3645,9 @@ SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata,
 	 * a negative D. The CRT controller does not
 	 * seem to like correcting HRE to 50)
 	 */
-#ifdef SIS_LINUX_KERNEL
       var->left_margin = (400 - 376);
       var->right_margin = (328 - 320);
       var->hsync_len = (376 - 328);
-#endif
 
    }
 
diff --git a/drivers/video/sis/init.h b/drivers/video/sis/init.h
index 4a75c73e134a..1d54759a49d4 100644
--- a/drivers/video/sis/init.h
+++ b/drivers/video/sis/init.h
@@ -56,7 +56,6 @@
 #include "osdef.h"
 #include "initdef.h"
 
-#ifdef SIS_LINUX_KERNEL
 #include "vgatypes.h"
 #include "vstruct.h"
 #ifdef SIS_CP
@@ -67,7 +66,6 @@
 #include <linux/fb.h>
 #include "sis.h"
 #include <video/sisfb.h>
-#endif
 
 /* Mode numbers */
 static const unsigned short ModeIndex_320x200[]      = {0x59, 0x41, 0x00, 0x4f};
@@ -1535,17 +1533,11 @@ void		SiS_SetRegOR(SISIOADDRESS Port,unsigned short Index, unsigned short DataOR
 void		SiS_DisplayOn(struct SiS_Private *SiS_Pr);
 void		SiS_DisplayOff(struct SiS_Private *SiS_Pr);
 void		SiSRegInit(struct SiS_Private *SiS_Pr, SISIOADDRESS BaseAddr);
-#ifndef SIS_LINUX_KERNEL
-void		SiSSetLVDSetc(struct SiS_Private *SiS_Pr);
-#endif
 void		SiS_SetEnableDstn(struct SiS_Private *SiS_Pr, int enable);
 void		SiS_SetEnableFstn(struct SiS_Private *SiS_Pr, int enable);
 unsigned short	SiS_GetModeFlag(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 				unsigned short ModeIdIndex);
 bool		SiSDetermineROMLayout661(struct SiS_Private *SiS_Pr);
-#ifndef SIS_LINUX_KERNEL
-void		SiS_GetVBType(struct SiS_Private *SiS_Pr);
-#endif
 
 bool		SiS_SearchModeID(struct SiS_Private *SiS_Pr, unsigned short *ModeNo,
 				unsigned short *ModeIdIndex);
@@ -1564,16 +1556,12 @@ unsigned short	SiS_GetFIFOThresholdB300(unsigned short idx1, unsigned short idx2
 unsigned short	SiS_GetLatencyFactor630(struct SiS_Private *SiS_Pr, unsigned short index);
 #endif
 void		SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex);
-#ifdef SIS_LINUX_KERNEL
 bool		SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
-#endif
 void		SiS_CalcCRRegisters(struct SiS_Private *SiS_Pr, int depth);
 void		SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 				unsigned short ModeIdIndex);
-#ifdef SIS_LINUX_KERNEL
 void		SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, int xres,
 				int yres, struct fb_var_screeninfo *var, bool writeres);
-#endif
 
 /* From init301.c: */
 extern void		SiS_GetVBInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
@@ -1597,7 +1585,6 @@ extern unsigned short	SiS_GetVCLK2Ptr(struct SiS_Private *SiS_Pr, unsigned short
 extern bool		SiS_IsVAMode(struct SiS_Private *);
 extern bool		SiS_IsDualEdge(struct SiS_Private *);
 
-#ifdef SIS_LINUX_KERNEL
 #ifdef SIS300
 extern unsigned int	sisfb_read_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg);
 extern void		sisfb_write_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg,
@@ -1608,7 +1595,6 @@ extern void		sisfb_write_nbridge_pci_byte(struct SiS_Private *SiS_Pr, int reg,
 				unsigned char val);
 extern unsigned int	sisfb_read_mio_pci_word(struct SiS_Private *SiS_Pr, int reg);
 #endif
-#endif
 
 #endif
 
diff --git a/drivers/video/sis/init301.c b/drivers/video/sis/init301.c
index a4b344e2dea1..78055f610907 100644
--- a/drivers/video/sis/init301.c
+++ b/drivers/video/sis/init301.c
@@ -87,9 +87,7 @@
 #define SiS_I2CDELAYSHORT  150
 
 static unsigned short	SiS_GetBIOSLCDResInfo(struct SiS_Private *SiS_Pr);
-#ifdef SIS_LINUX_KERNEL
 static void		SiS_SetCH70xx(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val);
-#endif
 
 /*********************************************/
 /*         HELPER: Lock/Unlock CRT2          */
@@ -106,9 +104,7 @@ SiS_UnLockCRT2(struct SiS_Private *SiS_Pr)
       SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x24,0x01);
 }
 
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 void
 SiS_LockCRT2(struct SiS_Private *SiS_Pr)
 {
@@ -923,11 +919,7 @@ SiS_SetChrontelGPIO(struct SiS_Private *SiS_Pr, unsigned short myvbinfo)
 
    if(!(SiS_Pr->SiS_ChSW)) return;
 
-#ifdef SIS_LINUX_KERNEL
    acpibase = sisfb_read_lpc_pci_dword(SiS_Pr, 0x74);
-#else
-   acpibase = pciReadLong(0x00000800, 0x74);
-#endif
    acpibase &= 0xFFFF;
    if(!acpibase) return;
    temp = SiS_GetRegShort((acpibase + 0x3c));	/* ACPI register 0x3c: GP Event 1 I/O mode select */
@@ -1160,12 +1152,10 @@ SiS_GetVBInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    }
 #endif
 
-#ifdef SIS_LINUX_KERNEL
 #if 0
    printk(KERN_DEBUG "sisfb: (init301: VBInfo= 0x%04x, SetFlag=0x%04x)\n",
       SiS_Pr->SiS_VBInfo, SiS_Pr->SiS_SetFlag);
 #endif
-#endif
 }
 
 /*********************************************/
@@ -2150,12 +2140,10 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh
      SiS_Pr->SiS_SetFlag |= LCDVESATiming;
   }
 
-#ifdef SIS_LINUX_KERNEL
 #if 0
   printk(KERN_DEBUG "sisfb: (LCDInfo=0x%04x LCDResInfo=0x%02x LCDTypeInfo=0x%02x)\n",
 	SiS_Pr->SiS_LCDInfo, SiS_Pr->SiS_LCDResInfo, SiS_Pr->SiS_LCDTypeInfo);
 #endif
-#endif
 }
 
 /*********************************************/
@@ -4246,9 +4234,7 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr)
  * from outside the context of a mode switch!
  * MUST call getVBType before calling this
  */
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 void
 SiS_EnableBridge(struct SiS_Private *SiS_Pr)
 {
@@ -5096,13 +5082,8 @@ SiS_SetCRT2FIFO_300(struct SiS_Private *SiS_Pr,unsigned short ModeNo)
 
      } else {
 
-#ifdef SIS_LINUX_KERNEL
 	pci50 = sisfb_read_nbridge_pci_dword(SiS_Pr, 0x50);
 	pciA0 = sisfb_read_nbridge_pci_dword(SiS_Pr, 0xa0);
-#else
-	pci50 = pciReadLong(0x00000000, 0x50);
-	pciA0 = pciReadLong(0x00000000, 0xA0);
-#endif
 
         if(SiS_Pr->ChipType == SIS_730) {
 
@@ -8872,9 +8853,7 @@ SiS_SetCH701x(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val)
   SiS_SetChReg(SiS_Pr, reg, val, 0);
 }
 
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 void
 SiS_SetCH70xx(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val)
 {
@@ -8961,9 +8940,7 @@ SiS_GetCH701x(struct SiS_Private *SiS_Pr, unsigned short tempbx)
 
 /* Read from Chrontel 70xx */
 /* Parameter is [Register no (S7-S0)] */
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 unsigned short
 SiS_GetCH70xx(struct SiS_Private *SiS_Pr, unsigned short tempbx)
 {
diff --git a/drivers/video/sis/init301.h b/drivers/video/sis/init301.h
index c379dc7a9973..31e24ae6c6e6 100644
--- a/drivers/video/sis/init301.h
+++ b/drivers/video/sis/init301.h
@@ -56,7 +56,6 @@
 #include "osdef.h"
 #include "initdef.h"
 
-#ifdef SIS_LINUX_KERNEL
 #include "vgatypes.h"
 #include "vstruct.h"
 #ifdef SIS_CP
@@ -67,7 +66,6 @@
 #include <linux/fb.h>
 #include "sis.h"
 #include <video/sisfb.h>
-#endif
 
 static const unsigned char SiS_YPbPrTable[3][64] = {
   {
@@ -351,9 +349,6 @@ static unsigned char SiS300_TrumpionData[14][80] = {
 #endif
 
 void		SiS_UnLockCRT2(struct SiS_Private *SiS_Pr);
-#ifndef SIS_LINUX_KERNEL
-void		SiS_LockCRT2(struct SiS_Private *SiS_Pr);
-#endif
 void		SiS_EnableCRT2(struct SiS_Private *SiS_Pr);
 unsigned short	SiS_GetRatePtr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex);
 void		SiS_WaitRetrace1(struct SiS_Private *SiS_Pr);
@@ -370,9 +365,6 @@ unsigned short	SiS_GetVCLK2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo
 			unsigned short RefreshRateTableIndex);
 unsigned short	SiS_GetResInfo(struct SiS_Private *SiS_Pr,unsigned short ModeNo,unsigned short ModeIdIndex);
 void		SiS_DisableBridge(struct SiS_Private *SiS_Pr);
-#ifndef SIS_LINUX_KERNEL
-void		SiS_EnableBridge(struct SiS_Private *SiS_Pr);
-#endif
 bool		SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
 void		SiS_SiS30xBLOn(struct SiS_Private *SiS_Pr);
 void		SiS_SiS30xBLOff(struct SiS_Private *SiS_Pr);
@@ -381,10 +373,6 @@ void		SiS_SetCH700x(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned cha
 unsigned short	SiS_GetCH700x(struct SiS_Private *SiS_Pr, unsigned short tempax);
 void		SiS_SetCH701x(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val);
 unsigned short	SiS_GetCH701x(struct SiS_Private *SiS_Pr, unsigned short tempax);
-#ifndef SIS_LINUX_KERNEL
-void		SiS_SetCH70xx(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val);
-unsigned short	SiS_GetCH70xx(struct SiS_Private *SiS_Pr, unsigned short tempax);
-#endif
 void		SiS_SetCH70xxANDOR(struct SiS_Private *SiS_Pr, unsigned short reg,
 			unsigned char orval,unsigned short andval);
 #ifdef SIS315H
@@ -473,10 +461,8 @@ extern void		SiS_GetFIFOThresholdIndex300(struct SiS_Private *SiS_Pr, unsigned s
 				unsigned short *tempcl);
 extern unsigned short	SiS_GetFIFOThresholdB300(unsigned short tempbx, unsigned short tempcl);
 extern unsigned short	SiS_GetLatencyFactor630(struct SiS_Private *SiS_Pr, unsigned short index);
-#ifdef SIS_LINUX_KERNEL
 extern unsigned int	sisfb_read_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg);
 extern unsigned int	sisfb_read_lpc_pci_dword(struct SiS_Private *SiS_Pr, int reg);
 #endif
-#endif
 
 #endif
diff --git a/drivers/video/sis/osdef.h b/drivers/video/sis/osdef.h
index e24d21a7ae4b..bc185a9a4d84 100644
--- a/drivers/video/sis/osdef.h
+++ b/drivers/video/sis/osdef.h
@@ -54,9 +54,6 @@
 #ifndef _SIS_OSDEF_H_
 #define _SIS_OSDEF_H_
 
-/* The choices are: */
-#define SIS_LINUX_KERNEL		/* Linux kernel framebuffer */
-
 #ifdef OutPortByte
 #undef OutPortByte
 #endif
@@ -85,8 +82,6 @@
 /*  LINUX KERNEL                                                      */
 /**********************************************************************/
 
-#ifdef SIS_LINUX_KERNEL
-
 #ifdef CONFIG_FB_SIS_300
 #define SIS300
 #endif
@@ -108,6 +103,4 @@
 #define InPortLong(p)    inl((SISIOADDRESS)(p))
 #define SiS_SetMemory(MemoryAddress,MemorySize,value) memset_io(MemoryAddress, value, MemorySize)
 
-#endif /* LINUX_KERNEL */
-
 #endif  /* _OSDEF_H_ */
diff --git a/drivers/video/sis/vgatypes.h b/drivers/video/sis/vgatypes.h
index f499062bba94..12c0dfaf2518 100644
--- a/drivers/video/sis/vgatypes.h
+++ b/drivers/video/sis/vgatypes.h
@@ -55,12 +55,10 @@
 
 #define SISIOMEMTYPE
 
-#ifdef SIS_LINUX_KERNEL
 typedef unsigned long SISIOADDRESS;
 #include <linux/types.h>  /* Need __iomem */
 #undef SISIOMEMTYPE
 #define SISIOMEMTYPE __iomem
-#endif
 
 typedef enum _SIS_CHIP_TYPE {
     SIS_VGALegacy = 0,
diff --git a/drivers/video/sis/vstruct.h b/drivers/video/sis/vstruct.h
index a860039c1122..ea94d214dcff 100644
--- a/drivers/video/sis/vstruct.h
+++ b/drivers/video/sis/vstruct.h
@@ -233,21 +233,15 @@ struct SiS_Private
 {
 	unsigned char			ChipType;
 	unsigned char			ChipRevision;
-#ifdef SIS_LINUX_KERNEL
 	void				*ivideo;
-#endif
 	unsigned char 			*VirtualRomBase;
 	bool				UseROM;
-#ifdef SIS_LINUX_KERNEL
 	unsigned char SISIOMEMTYPE	*VideoMemoryAddress;
 	unsigned int			VideoMemorySize;
-#endif
 	SISIOADDRESS			IOAddress;
 	SISIOADDRESS			IOAddress2;  /* For dual chip XGI volari */
 
-#ifdef SIS_LINUX_KERNEL
 	SISIOADDRESS			RelIO;
-#endif
 	SISIOADDRESS			SiS_P3c4;
 	SISIOADDRESS			SiS_P3d4;
 	SISIOADDRESS			SiS_P3c0;

From f7854e5df3f0828e942b089a82dfa5ce9baea428 Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Fri, 19 Nov 2010 21:58:47 +0000
Subject: [PATCH 0913/1066] sisfb: use CONFIG_FB_SIS_301/315 instead of
 SIS301/315H

There is no need to alias CONFIG #defines.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sis/init.c       |  74 ++++-----
 drivers/video/sis/init.h       |   8 +-
 drivers/video/sis/init301.c    | 282 ++++++++++++++++-----------------
 drivers/video/sis/init301.h    |  14 +-
 drivers/video/sis/initextlfb.c |   6 +-
 drivers/video/sis/osdef.h      |  10 +-
 6 files changed, 193 insertions(+), 201 deletions(-)

diff --git a/drivers/video/sis/init.c b/drivers/video/sis/init.c
index 5634dfb46624..8351151e3f27 100644
--- a/drivers/video/sis/init.c
+++ b/drivers/video/sis/init.c
@@ -62,11 +62,11 @@
 
 #include "init.h"
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 #include "300vtbl.h"
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 #include "310vtbl.h"
 #endif
 
@@ -78,7 +78,7 @@
 /*         POINTER INITIALIZATION            */
 /*********************************************/
 
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
 static void
 InitCommonPointer(struct SiS_Private *SiS_Pr)
 {
@@ -160,7 +160,7 @@ InitCommonPointer(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static void
 InitTo300Pointer(struct SiS_Private *SiS_Pr)
 {
@@ -237,7 +237,7 @@ InitTo300Pointer(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 InitTo310Pointer(struct SiS_Private *SiS_Pr)
 {
@@ -321,13 +321,13 @@ bool
 SiSInitPtr(struct SiS_Private *SiS_Pr)
 {
    if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       InitTo300Pointer(SiS_Pr);
 #else
       return false;
 #endif
    } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       InitTo310Pointer(SiS_Pr);
 #else
       return false;
@@ -1087,7 +1087,7 @@ static void
 SiSInitPCIetc(struct SiS_Private *SiS_Pr)
 {
    switch(SiS_Pr->ChipType) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    case SIS_300:
    case SIS_540:
    case SIS_630:
@@ -1106,7 +1106,7 @@ SiSInitPCIetc(struct SiS_Private *SiS_Pr)
       SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x5A);
       break;
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    case SIS_315H:
    case SIS_315:
    case SIS_315PRO:
@@ -1170,7 +1170,7 @@ SiSSetLVDSetc(struct SiS_Private *SiS_Pr)
    if((temp == 1) || (temp == 2)) return;
 
    switch(SiS_Pr->ChipType) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    case SIS_540:
    case SIS_630:
    case SIS_730:
@@ -1184,7 +1184,7 @@ SiSSetLVDSetc(struct SiS_Private *SiS_Pr)
 	}
 	break;
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    case SIS_550:
    case SIS_650:
    case SIS_740:
@@ -1499,7 +1499,7 @@ SiS_CheckMemorySize(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 /*           HELPER: Get DRAM type           */
 /*********************************************/
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static unsigned char
 SiS_Get310DRAMType(struct SiS_Private *SiS_Pr)
 {
@@ -2122,7 +2122,7 @@ SiS_SetCRT1CRTC(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
       SiS_SetReg(SiS_Pr->SiS_P3d4,0x14,0x4F);
    }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType == XGI_20) {
       SiS_SetReg(SiS_Pr->SiS_P3d4,0x04,crt1data[4] - 1);
       if(!(temp = crt1data[5] & 0x1f)) {
@@ -2205,7 +2205,7 @@ SiS_SetCRT1VCLK(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    SiS_SetReg(SiS_Pr->SiS_P3c4,0x2c,clkb);
 
    if(SiS_Pr->ChipType >= SIS_315H) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       SiS_SetReg(SiS_Pr->SiS_P3c4,0x2D,0x01);
       if(SiS_Pr->ChipType == XGI_20) {
          unsigned short mf = SiS_GetModeFlag(SiS_Pr, ModeNo, ModeIdIndex);
@@ -2226,7 +2226,7 @@ SiS_SetCRT1VCLK(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 /*                  FIFO                     */
 /*********************************************/
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 void
 SiS_GetFIFOThresholdIndex300(struct SiS_Private *SiS_Pr, unsigned short *idx1,
 		unsigned short *idx2)
@@ -2535,9 +2535,9 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
    sisfb_write_nbridge_pci_dword(SiS_Pr, 0xA0, templ);
 }
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 SiS_SetCRT1FIFO_310(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex)
 {
@@ -2589,7 +2589,7 @@ SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    }
 
    if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       if(VCLK > 150) data |= 0x80;
       SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x07,0x7B,data);
 
@@ -2598,7 +2598,7 @@ SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
       SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x32,0xF7,data);
 #endif
    } else if(SiS_Pr->ChipType < XGI_20) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       if(VCLK >= 166) data |= 0x0c;
       SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x32,0xf3,data);
 
@@ -2607,7 +2607,7 @@ SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
       }
 #endif
    } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       if(VCLK >= 200) data |= 0x0c;
       if(SiS_Pr->ChipType == XGI_20) data &= ~0x04;
       SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x32,0xf3,data);
@@ -2652,7 +2652,7 @@ SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 		unsigned short ModeIdIndex, unsigned short RRTI)
 {
    unsigned short data, infoflag = 0, modeflag, resindex;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    unsigned char  *ROMAddr  = SiS_Pr->VirtualRomBase;
    unsigned short data2, data3;
 #endif
@@ -2713,7 +2713,7 @@ SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
       SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x0F,0xB7,data);
    }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType >= SIS_315H) {
       SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x31,0xfb);
    }
@@ -2803,7 +2803,7 @@ SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
    SiS_SetVCLKState(SiS_Pr, ModeNo, RRTI, ModeIdIndex);
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(((SiS_Pr->ChipType >= SIS_315H) && (SiS_Pr->ChipType < SIS_661)) ||
        (SiS_Pr->ChipType == XGI_40)) {
       if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x31) & 0x40) {
@@ -2822,7 +2822,7 @@ SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 #endif
 }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 SiS_SetupDualChip(struct SiS_Private *SiS_Pr)
 {
@@ -3000,7 +3000,7 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sho
    }
 
    switch(SiS_Pr->ChipType) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    case SIS_300:
       SiS_SetCRT1FIFO_300(SiS_Pr, ModeNo, RefreshRateTableIndex);
       break;
@@ -3011,7 +3011,7 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sho
       break;
 #endif
    default:
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       if(SiS_Pr->ChipType == XGI_20) {
          unsigned char sr2b = 0, sr2c = 0;
          switch(ModeNo) {
@@ -3034,7 +3034,7 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sho
 
    SiS_SetCRT1ModeRegs(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType == XGI_40) {
       SiS_SetupDualChip(SiS_Pr);
    }
@@ -3074,7 +3074,7 @@ SiS_InitVB(struct SiS_Private *SiS_Pr)
 static void
 SiS_ResetVB(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    unsigned char  *ROMAddr = SiS_Pr->VirtualRomBase;
    unsigned short temp;
 
@@ -3109,7 +3109,7 @@ SiS_StrangeStuff(struct SiS_Private *SiS_Pr)
     * which locks CRT2 in some way to CRT1 timing. Disable
     * this here.
     */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if((IS_SIS651) || (IS_SISM650) ||
       SiS_Pr->ChipType == SIS_340 ||
       SiS_Pr->ChipType == XGI_40) {
@@ -3130,7 +3130,7 @@ SiS_StrangeStuff(struct SiS_Private *SiS_Pr)
 static void
 SiS_Handle760(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    unsigned int somebase;
    unsigned char temp1, temp2, temp3;
 
@@ -3272,7 +3272,7 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
    SiS_DisplayOn(SiS_Pr);
    SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF);
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType >= SIS_315H) {
       if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
 	 if(!(SiS_IsDualEdge(SiS_Pr))) {
@@ -3284,7 +3284,7 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 
    if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
       if(SiS_Pr->ChipType >= SIS_315H) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	 if(!SiS_Pr->SiS_ROMNew) {
 	    if(SiS_IsVAMode(SiS_Pr)) {
 	       SiS_SetRegOR(SiS_Pr->SiS_P3d4,0x35,0x01);
@@ -3407,7 +3407,7 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    SiS_Pr->CVBlankStart = SiS_Pr->SiS_VGAVDE;
 
    if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       tempbx = SiS_Pr->SiS_VGAHT;
       if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
          tempbx = SiS_Pr->PanelHT;
@@ -3416,7 +3416,7 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
       remaining = tempbx % 8;
 #endif
    } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       /* OK for LCDA, LVDS */
       tempbx = SiS_Pr->PanelHT - SiS_Pr->PanelXRes;
       tempax = SiS_Pr->SiS_VGAHDE;  /* not /2 ! */
@@ -3430,7 +3430,7 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    SiS_Pr->CHTotal = SiS_Pr->CHBlankEnd = tempbx;
 
    if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       if(SiS_Pr->SiS_VGAHDE == SiS_Pr->PanelXRes) {
 	 SiS_Pr->CHSyncStart = SiS_Pr->SiS_VGAHDE + ((SiS_Pr->PanelHRS + 1) & ~1);
 	 SiS_Pr->CHSyncEnd = SiS_Pr->CHSyncStart + SiS_Pr->PanelHRE;
@@ -3462,7 +3462,7 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
       }
 #endif
    } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       tempax = VGAHDE;
       if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
 	 tempbx = SiS_Pr->PanelXRes;
@@ -3481,7 +3481,7 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
       tempax = SiS_Pr->PanelYRes;
    } else if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       /* Stupid hack for 640x400/320x200 */
       if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) {
 	 if((tempax + tempbx) == 438) tempbx += 16;
diff --git a/drivers/video/sis/init.h b/drivers/video/sis/init.h
index 1d54759a49d4..79aec28e49c4 100644
--- a/drivers/video/sis/init.h
+++ b/drivers/video/sis/init.h
@@ -273,7 +273,7 @@ static const struct SiS_ModeResInfo_S SiS_ModeResInfo[] =
 	{ 1280, 854, 8,16}    /* 0x22 */
 };
 
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
 static const struct SiS_StandTable_S SiS_StandTable[]=
 {
 /* 0x00: MD_0_200 */
@@ -1549,7 +1549,7 @@ unsigned short	SiS_GetColorDepth(struct SiS_Private *SiS_Pr, unsigned short Mode
 				unsigned short ModeIdIndex);
 unsigned short	SiS_GetOffset(struct SiS_Private *SiS_Pr,unsigned short ModeNo,
 				unsigned short ModeIdIndex, unsigned short RRTI);
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 void		SiS_GetFIFOThresholdIndex300(struct SiS_Private *SiS_Pr, unsigned short *idx1,
 				unsigned short *idx2);
 unsigned short	SiS_GetFIFOThresholdB300(unsigned short idx1, unsigned short idx2);
@@ -1585,12 +1585,12 @@ extern unsigned short	SiS_GetVCLK2Ptr(struct SiS_Private *SiS_Pr, unsigned short
 extern bool		SiS_IsVAMode(struct SiS_Private *);
 extern bool		SiS_IsDualEdge(struct SiS_Private *);
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 extern unsigned int	sisfb_read_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg);
 extern void		sisfb_write_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg,
 				unsigned int val);
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 extern void		sisfb_write_nbridge_pci_byte(struct SiS_Private *SiS_Pr, int reg,
 				unsigned char val);
 extern unsigned int	sisfb_read_mio_pci_word(struct SiS_Private *SiS_Pr, int reg);
diff --git a/drivers/video/sis/init301.c b/drivers/video/sis/init301.c
index 78055f610907..9fa66fd4052a 100644
--- a/drivers/video/sis/init301.c
+++ b/drivers/video/sis/init301.c
@@ -75,11 +75,11 @@
 
 #include "init301.h"
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 #include "oem300.h"
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 #include "oem310.h"
 #endif
 
@@ -134,7 +134,7 @@ SiS_SetRegSR11ANDOR(struct SiS_Private *SiS_Pr, unsigned short DataAND, unsigned
 /*    HELPER: Get Pointer to LCD structure   */
 /*********************************************/
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static unsigned char *
 GetLCDStructPtr661(struct SiS_Private *SiS_Pr)
 {
@@ -400,7 +400,7 @@ SiS_SaveCRT2Info(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 /*    HELPER: GET SOME DATA FROM BIOS ROM    */
 /*********************************************/
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static bool
 SiS_CR36BIOSWord23b(struct SiS_Private *SiS_Pr)
 {
@@ -445,7 +445,7 @@ SiS_DDC2Delay(struct SiS_Private *SiS_Pr, unsigned int delaytime)
       SiS_GetReg(SiS_Pr->SiS_P3c4, 0x05);
 }
 
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
 static void
 SiS_GenericDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
 {
@@ -453,7 +453,7 @@ SiS_GenericDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 SiS_LongDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
 {
@@ -463,7 +463,7 @@ SiS_LongDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
 }
 #endif
 
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
 static void
 SiS_ShortDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
 {
@@ -476,14 +476,14 @@ SiS_ShortDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
 static void
 SiS_PanelDelay(struct SiS_Private *SiS_Pr, unsigned short DelayTime)
 {
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
    unsigned char  *ROMAddr = SiS_Pr->VirtualRomBase;
    unsigned short PanelID, DelayIndex, Delay=0;
 #endif
 
    if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 
       PanelID = SiS_GetReg(SiS_Pr->SiS_P3d4,0x36);
       if(SiS_Pr->SiS_VBType & VB_SISVB) {
@@ -509,11 +509,11 @@ SiS_PanelDelay(struct SiS_Private *SiS_Pr, unsigned short DelayTime)
       }
       SiS_ShortDelay(SiS_Pr, Delay);
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
    } else {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 
       if((SiS_Pr->ChipType >= SIS_661)    ||
 	 (SiS_Pr->ChipType <= SIS_315PRO) ||
@@ -575,12 +575,12 @@ SiS_PanelDelay(struct SiS_Private *SiS_Pr, unsigned short DelayTime)
 
       }
 
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
 
    }
 }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 SiS_PanelDelayLoop(struct SiS_Private *SiS_Pr, unsigned short DelayTime, unsigned short DelayLoop)
 {
@@ -609,7 +609,7 @@ SiS_WaitRetrace1(struct SiS_Private *SiS_Pr)
    while((!(SiS_GetRegByte(SiS_Pr->SiS_P3da) & 0x08)) && --watchdog);
 }
 
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
 static void
 SiS_WaitRetrace2(struct SiS_Private *SiS_Pr, unsigned short reg)
 {
@@ -626,7 +626,7 @@ static void
 SiS_WaitVBRetrace(struct SiS_Private *SiS_Pr)
 {
    if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
 	 if(!(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x20)) return;
       }
@@ -637,7 +637,7 @@ SiS_WaitVBRetrace(struct SiS_Private *SiS_Pr)
       }
 #endif
    } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       if(!(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x40)) {
 	 SiS_WaitRetrace1(SiS_Pr);
       } else {
@@ -682,7 +682,7 @@ SiS_VBLongWait(struct SiS_Private *SiS_Pr)
 /*               HELPER: MISC                */
 /*********************************************/
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static bool
 SiS_Is301B(struct SiS_Private *SiS_Pr)
 {
@@ -704,7 +704,7 @@ SiS_CRT2IsLCD(struct SiS_Private *SiS_Pr)
 bool
 SiS_IsDualEdge(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType >= SIS_315H) {
       if((SiS_Pr->ChipType != SIS_650) || (SiS_GetReg(SiS_Pr->SiS_P3d4,0x5f) & 0xf0)) {
 	 if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x38) & EnableDualEdge) return true;
@@ -717,7 +717,7 @@ SiS_IsDualEdge(struct SiS_Private *SiS_Pr)
 bool
 SiS_IsVAMode(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    unsigned short flag;
 
    if(SiS_Pr->ChipType >= SIS_315H) {
@@ -728,7 +728,7 @@ SiS_IsVAMode(struct SiS_Private *SiS_Pr)
    return false;
 }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsVAorLCD(struct SiS_Private *SiS_Pr)
 {
@@ -741,7 +741,7 @@ SiS_IsVAorLCD(struct SiS_Private *SiS_Pr)
 static bool
 SiS_IsDualLink(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType >= SIS_315H) {
       if((SiS_CRT2IsLCD(SiS_Pr)) ||
          (SiS_IsVAMode(SiS_Pr))) {
@@ -752,7 +752,7 @@ SiS_IsDualLink(struct SiS_Private *SiS_Pr)
    return false;
 }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_TVEnabled(struct SiS_Private *SiS_Pr)
 {
@@ -764,7 +764,7 @@ SiS_TVEnabled(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_LCDAEnabled(struct SiS_Private *SiS_Pr)
 {
@@ -773,7 +773,7 @@ SiS_LCDAEnabled(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_WeHaveBacklightCtrl(struct SiS_Private *SiS_Pr)
 {
@@ -784,7 +784,7 @@ SiS_WeHaveBacklightCtrl(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsNotM650orLater(struct SiS_Private *SiS_Pr)
 {
@@ -800,7 +800,7 @@ SiS_IsNotM650orLater(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsYPbPr(struct SiS_Private *SiS_Pr)
 {
@@ -812,7 +812,7 @@ SiS_IsYPbPr(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsChScart(struct SiS_Private *SiS_Pr)
 {
@@ -824,7 +824,7 @@ SiS_IsChScart(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsTVOrYPbPrOrScart(struct SiS_Private *SiS_Pr)
 {
@@ -844,7 +844,7 @@ SiS_IsTVOrYPbPrOrScart(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsLCDOrLCDA(struct SiS_Private *SiS_Pr)
 {
@@ -910,7 +910,7 @@ SiS_BridgeInSlavemode(struct SiS_Private *SiS_Pr)
 /*********************************************/
 
 /* Setup general purpose IO for Chrontel communication */
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 void
 SiS_SetChrontelGPIO(struct SiS_Private *SiS_Pr, unsigned short myvbinfo)
 {
@@ -961,7 +961,7 @@ SiS_GetVBInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 	tempax &= (DriverMode | LoadDACFlag | SetNotSimuMode | SetPALTV);
 	tempbx |= tempax;
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	if(SiS_Pr->ChipType >= SIS_315H) {
 	   if(SiS_Pr->SiS_VBType & VB_SISLCDA) {
 	      if(ModeNo == 0x03) {
@@ -1011,7 +1011,7 @@ SiS_GetVBInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 	   }
 	}
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
         if(!(SiS_Pr->SiS_VBType & VB_SISVGA2)) {
 	   tempbx &= ~(SetCRT2ToRAMDAC);
@@ -1146,7 +1146,7 @@ SiS_GetVBInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
    SiS_Pr->SiS_VBInfo = tempbx;
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    if(SiS_Pr->ChipType == SIS_630) {
       SiS_SetChrontelGPIO(SiS_Pr, SiS_Pr->SiS_VBInfo);
    }
@@ -1421,7 +1421,7 @@ SiS_GetBIOSLCDResInfo(struct SiS_Private *SiS_Pr)
 static void
 SiS_GetLCDInfoBIOS(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    unsigned char  *ROMAddr;
    unsigned short temp;
 
@@ -1471,13 +1471,13 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh
 {
   unsigned short temp,modeflag,resinfo=0,modexres=0,modeyres=0;
   bool panelcanscale = false;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   unsigned char *ROMAddr = SiS_Pr->VirtualRomBase;
   static const unsigned char SiS300SeriesLCDRes[] =
           { 0,  1,  2,  3,  7,  4,  5,  8,
 	    0,  0, 10,  0,  0,  0,  0, 15 };
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned char   *myptr = NULL;
 #endif
 
@@ -1516,7 +1516,7 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh
      SiS_Pr->SiS_LCDTypeInfo = (temp & 0x0F) - 1;
   }
   temp &= 0x0f;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   if(SiS_Pr->ChipType < SIS_315H) {
      /* Very old BIOSes only know 7 sizes (NetVista 2179, 1.01g) */
      if(SiS_Pr->SiS_VBType & VB_SIS301) {
@@ -1528,7 +1528,7 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh
 #endif
 
   /* Translate to our internal types */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if(SiS_Pr->ChipType == SIS_550) {
      if     (temp == Panel310_1152x768)  temp = Panel_320x240_2; /* Verified working */
      else if(temp == Panel310_320x240_2) temp = Panel_320x240_2;
@@ -1551,7 +1551,7 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh
 
   SiS_Pr->SiS_LCDResInfo = temp;
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
      if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) {
 	SiS_Pr->SiS_LCDResInfo = Panel_Barco1366;
@@ -1593,7 +1593,7 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh
   else if(SiS_Pr->UsePanelScaler == 1) SiS_Pr->SiS_LCDInfo |= DontExpandLCD;
 
   /* Dual link, Pass 1:1 BIOS default, etc. */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if(SiS_Pr->ChipType >= SIS_661) {
      if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
 	if(temp & 0x08) SiS_Pr->SiS_LCDInfo |= LCDPass11;
@@ -2030,7 +2030,7 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh
      }
   }
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
      if(SiS_Pr->SiS_CustomT == CUT_PANEL848 || SiS_Pr->SiS_CustomT == CUT_PANEL856) {
 	SiS_Pr->SiS_LCDInfo = 0x80 | 0x40 | 0x20;   /* neg h/v sync, RGB24(D0 = 0) */
@@ -2306,7 +2306,7 @@ SiS_GetVCLK2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor
 	      VCLKIndex = SiS_Pr->PanelVCLKIdx315;
 	   }
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	   /* Special Timing: Barco iQ Pro R series */
 	   if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) VCLKIndex = 0x44;
 
@@ -2369,10 +2369,10 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 {
   unsigned short i, j, modeflag, tempah=0;
   short tempcl;
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
   unsigned short tempbl;
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned char  *ROMAddr = SiS_Pr->VirtualRomBase;
   unsigned short tempah2, tempbl2;
 #endif
@@ -2395,7 +2395,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 
      if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300    /* ---- 300 series ---- */
+#ifdef CONFIG_FB_SIS_300    /* ---- 300 series ---- */
 
 	/* For 301BDH: (with LCD via LVDS) */
 	if(SiS_Pr->SiS_VBType & VB_NoLCD) {
@@ -2418,11 +2418,11 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 
 	if(SiS_Pr->SiS_VBInfo & SetInSlaveMode)  tempah ^= 0xA0;
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
      } else {
 
-#ifdef SIS315H    /* ------- 315/330 series ------ */
+#ifdef CONFIG_FB_SIS_315    /* ------- 315/330 series ------ */
 
 	if(ModeNo > 0x13) {
 	   tempcl -= ModeVGA;
@@ -2435,7 +2435,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 
 	if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) tempah ^= 0x50;
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
      }
 
@@ -2444,7 +2444,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
      if(SiS_Pr->ChipType < SIS_315H) {
 	SiS_SetReg(SiS_Pr->SiS_Part1Port,0x00,tempah);
      } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
 	   SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x00,0xa0,tempah);
 	} else if(SiS_Pr->SiS_VBType & VB_SISVB) {
@@ -2525,7 +2525,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 
 	if(SiS_Pr->ChipType >= SIS_315H) {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	   /* LVDS can only be slave in 8bpp modes */
 	   tempah = 0x80;
 	   if((modeflag & CRT2Mode) && (SiS_Pr->SiS_ModeType > ModeVGA)) {
@@ -2545,7 +2545,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 
 	} else {
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	   tempah = 0;
 	   if( (!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) && (SiS_Pr->SiS_ModeType > ModeVGA) ) {
 	      tempah |= 0x02;
@@ -2567,7 +2567,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 
      if(SiS_Pr->ChipType >= SIS_315H) {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	/* unsigned char bridgerev = SiS_GetReg(SiS_Pr->SiS_Part4Port,0x01); */
 
 	/* The following is nearly unpreditable and varies from machine
@@ -2659,11 +2659,11 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 	   SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x23,tempbl,tempah);
 	}
 
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
 
      } else if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x21,0x3f);
 
 	if((SiS_Pr->SiS_VBInfo & DisableCRT2Display) ||
@@ -2686,7 +2686,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 
   } else {  /* LVDS */
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
      if(SiS_Pr->ChipType >= SIS_315H) {
 
 	if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) {
@@ -2872,7 +2872,7 @@ SiS_GetCRT2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 	   }
 	}
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	if(SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) {
 	   if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) {
 	      if(!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) {
@@ -2977,7 +2977,7 @@ SiS_GetCRT2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 	case Panel_1280x1024: tempbx = 24; break;
 	case Panel_1400x1050: tempbx = 26; break;
 	case Panel_1600x1200: tempbx = 28; break;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	case Panel_Barco1366: tempbx = 80; break;
 #endif
 	}
@@ -2994,7 +2994,7 @@ SiS_GetCRT2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
 	if(SiS_Pr->SiS_LCDInfo & LCDPass11) tempbx = 30;
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	if(SiS_Pr->SiS_CustomT == CUT_BARCO1024) {
 	   tempbx = 82;
 	   if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) tempbx++;
@@ -3130,7 +3130,7 @@ SiS_GetCRT2DataLVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 
    if((SiS_Pr->SiS_VBType & VB_SISVB) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       SiS_CalcPanelLinkTiming(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
       SiS_CalcLCDACRT1Timing(SiS_Pr, ModeNo, ModeIdIndex);
 #endif
@@ -3155,7 +3155,7 @@ SiS_GetCRT2DataLVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 	 case 16: LVDSData = SiS_Pr->SiS_LVDS800x600Data_1;    break;
 	 case 18: LVDSData = SiS_Pr->SiS_LVDS1024x600Data_1;   break;
 	 case 20: LVDSData = SiS_Pr->SiS_LVDS1024x768Data_1;   break;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	 case 80: LVDSData = SiS_Pr->SiS_LVDSBARCO1366Data_1;  break;
 	 case 81: LVDSData = SiS_Pr->SiS_LVDSBARCO1366Data_2;  break;
 	 case 82: LVDSData = SiS_Pr->SiS_LVDSBARCO1024Data_1;  break;
@@ -3189,7 +3189,7 @@ SiS_GetCRT2DataLVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 	     (SiS_Pr->SiS_SetFlag & SetDOSMode) ) {
 	    SiS_Pr->SiS_HDE = SiS_Pr->PanelXRes;
             SiS_Pr->SiS_VDE = SiS_Pr->PanelYRes;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	    if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) {
 	       if(ResIndex < 0x08) {
 		  SiS_Pr->SiS_HDE = 1280;
@@ -3211,7 +3211,7 @@ SiS_GetCRT2Data301(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
   unsigned short resinfo, CRT2Index, ResIndex;
   const struct SiS_LCDData *LCDPtr = NULL;
   const struct SiS_TVData  *TVPtr  = NULL;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   short resinfo661;
 #endif
 
@@ -3224,7 +3224,7 @@ SiS_GetCRT2Data301(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
   } else {
      modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
      resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
      resinfo661 = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].ROMMODEIDX661;
      if( (SiS_Pr->SiS_VBInfo & SetCRT2ToLCD)   &&
 	 (SiS_Pr->SiS_SetFlag & LCDVESATiming) &&
@@ -3401,7 +3401,7 @@ SiS_GetCRT2Data301(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
 
 	} else if( (!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) && (romptr) && (ROMAddr) ) {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	   SiS_Pr->SiS_RVBHCMAX  = ROMAddr[romptr];
 	   SiS_Pr->SiS_RVBHCFACT = ROMAddr[romptr+1];
 	   SiS_Pr->SiS_VGAHT     = ROMAddr[romptr+2] | ((ROMAddr[romptr+3] & 0x0f) << 8);
@@ -3461,7 +3461,7 @@ SiS_GetCRT2Data301(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
 	      case Panel_1680x1050     :
 	      case Panel_1680x1050 + 32: LCDPtr = SiS_Pr->SiS_LCD1680x1050Data;     break;
 	      case 100		       : LCDPtr = SiS_Pr->SiS_NoScaleData;	    break;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	      case 200                 : LCDPtr = SiS310_ExtCompaq1280x1024Data;    break;
 	      case 201                 : LCDPtr = SiS_Pr->SiS_St2LCD1280x1024Data;  break;
 #endif
@@ -3559,7 +3559,7 @@ SiS_GetLVDSDesPtr(struct SiS_Private *SiS_Pr)
 {
    const struct SiS_LVDSDes *PanelDesPtr = NULL;
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) {
 
       if(SiS_Pr->ChipType < SIS_315H) {
@@ -3631,7 +3631,7 @@ SiS_GetLVDSDesData(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
 
   if((SiS_Pr->SiS_VBType & VB_SIS30xBLV) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
      if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
 	/* non-pass 1:1 only, see above */
 	if(SiS_Pr->SiS_VGAHDE != SiS_Pr->PanelXRes) {
@@ -3706,7 +3706,7 @@ SiS_GetLVDSDesData(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
      } else {
 
         if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	   switch(SiS_Pr->SiS_LCDResInfo) {
 	   case Panel_800x600:
 	      if(SiS_Pr->SiS_VGAVDE == SiS_Pr->PanelYRes) {
@@ -3751,7 +3751,7 @@ SiS_GetLVDSDesData(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
 	   }
 #endif
         } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	   switch(SiS_Pr->SiS_LCDResInfo) {
 	   case Panel_1024x768:
 	   case Panel_1280x1024:
@@ -3779,7 +3779,7 @@ SiS_GetLVDSDesData(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
 	         if(SiS_Pr->ChipType < SIS_315H) {
 	            if(!(modeflag & HalfDCLK)) SiS_Pr->SiS_LCDHDES = 320;
 	         } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 		    if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768)  SiS_Pr->SiS_LCDHDES = 480;
 		    if(SiS_Pr->SiS_LCDResInfo == Panel_1400x1050) SiS_Pr->SiS_LCDHDES = 804;
 		    if(SiS_Pr->SiS_LCDResInfo == Panel_1600x1200) SiS_Pr->SiS_LCDHDES = 704;
@@ -3801,7 +3801,7 @@ SiS_GetLVDSDesData(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
 /*           DISABLE VIDEO BRIDGE            */
 /*********************************************/
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static int
 SiS_HandlePWD(struct SiS_Private *SiS_Pr)
 {
@@ -3839,7 +3839,7 @@ SiS_HandlePWD(struct SiS_Private *SiS_Pr)
 void
 SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned short tempah, pushax=0, modenum;
 #endif
   unsigned short temp=0;
@@ -3850,7 +3850,7 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 
 	if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300	   /* 300 series */
+#ifdef CONFIG_FB_SIS_300	   /* 300 series */
 
 	   if(!(SiS_CR36BIOSWord23b(SiS_Pr))) {
 	      if(SiS_Pr->SiS_VBType & VB_SISLVDS) {
@@ -3883,11 +3883,11 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 	      }
 	   }
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
         } else {
 
-#ifdef SIS315H	   /* 315 series */
+#ifdef CONFIG_FB_SIS_315	   /* 315 series */
 
 	   int didpwd = 0;
 	   bool custom1 = (SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) ||
@@ -4011,14 +4011,14 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 
 	   }
 
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
 
 	}
 
      } else {     /* ============ For 301 ================ */
 
         if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	   if(!(SiS_CR36BIOSWord23b(SiS_Pr))) {
 	      SiS_SetRegSR11ANDOR(SiS_Pr,0xF7,0x08);
 	      SiS_PanelDelay(SiS_Pr, 3);
@@ -4041,7 +4041,7 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 	    SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x20);
 	    SiS_SetReg(SiS_Pr->SiS_Part1Port,0x00,temp);
 	} else {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	    SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x1E,0xDF);            /* disable CRT2 */
 	    if( (!(SiS_CRT2IsLCD(SiS_Pr))) ||
 		(!(SiS_CR36BIOSWord23d(SiS_Pr))) ) {
@@ -4057,7 +4057,7 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 
     if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300	/* 300 series */
+#ifdef CONFIG_FB_SIS_300	/* 300 series */
 
 	if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) {
 	   SiS_SetCH700x(SiS_Pr,0x0E,0x09);
@@ -4101,11 +4101,11 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 	   SiS_SetRegSR11ANDOR(SiS_Pr,0xFB,0x04);
 	}
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
     } else {
 
-#ifdef SIS315H	/* 315 series */
+#ifdef CONFIG_FB_SIS_315	/* 315 series */
 
 	if(!(SiS_IsNotM650orLater(SiS_Pr))) {
 	   /*if(SiS_Pr->ChipType < SIS_340) { */ /* XGI needs this */
@@ -4218,7 +4218,7 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 	   }
         }
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
     }  /* 315 series */
 
@@ -4239,7 +4239,7 @@ void
 SiS_EnableBridge(struct SiS_Private *SiS_Pr)
 {
   unsigned short temp=0, tempah;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned short temp1, pushax=0;
   bool delaylong = false;
 #endif
@@ -4250,7 +4250,7 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr)
 
       if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300     /* 300 series */
+#ifdef CONFIG_FB_SIS_300     /* 300 series */
 
 	 if(SiS_CRT2IsLCD(SiS_Pr)) {
 	    if(SiS_Pr->SiS_VBType & VB_SISLVDS) {
@@ -4313,11 +4313,11 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr)
 	 }
 
 
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
 
       } else {
 
-#ifdef SIS315H    /* 315 series */
+#ifdef CONFIG_FB_SIS_315    /* 315 series */
 
 #ifdef SET_EMI
 	 unsigned char   r30=0, r31=0, r32=0, r33=0, cr36=0;
@@ -4616,7 +4616,7 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr)
 	    SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x00,0x7f);
 	 }
 
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
 
       }
 
@@ -4667,7 +4667,7 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr)
 
     if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300    /* 300 series */
+#ifdef CONFIG_FB_SIS_300    /* 300 series */
 
        if(SiS_CRT2IsLCD(SiS_Pr)) {
 	  if(SiS_Pr->ChipType == SIS_730) {
@@ -4711,11 +4711,11 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr)
 	  }
        }
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
     } else {
 
-#ifdef SIS315H    /* 315 series */
+#ifdef CONFIG_FB_SIS_315    /* 315 series */
 
        if(!(SiS_IsNotM650orLater(SiS_Pr))) {
 	  /*if(SiS_Pr->ChipType < SIS_340) {*/  /* XGI needs this */
@@ -4809,7 +4809,7 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr)
 	  }
        }
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
     } /* 310 series */
 
@@ -4899,7 +4899,7 @@ SiS_SetCRT2Sync(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor
 
       if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300  /* ---- 300 series --- */
+#ifdef CONFIG_FB_SIS_300  /* ---- 300 series --- */
 
 	 if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {			/* 630 - 301B(-DH) */
 
@@ -4928,11 +4928,11 @@ SiS_SetCRT2Sync(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor
 
 	 }
 
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
 
       } else {
 
-#ifdef SIS315H  /* ------- 315 series ------ */
+#ifdef CONFIG_FB_SIS_315  /* ------- 315 series ------ */
 
 	 if(SiS_Pr->SiS_VBType & VB_SISLVDS) {	  		/* 315 - LVDS */
 
@@ -5004,13 +5004,13 @@ SiS_SetCRT2Sync(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor
 	    }
 
          }
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
       }
    }
 }
 
 /* Set CRT2 FIFO on 300/540/630/730 */
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static void
 SiS_SetCRT2FIFO_300(struct SiS_Private *SiS_Pr,unsigned short ModeNo)
 {
@@ -5185,7 +5185,7 @@ SiS_SetCRT2FIFO_300(struct SiS_Private *SiS_Pr,unsigned short ModeNo)
 #endif
 
 /* Set CRT2 FIFO on 315/330 series */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 SiS_SetCRT2FIFO_310(struct SiS_Private *SiS_Pr)
 {
@@ -5357,17 +5357,17 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
   unsigned short push2, tempax, tempbx, tempcx, temp;
   unsigned int   tempeax = 0, tempebx, tempecx, tempvcfact = 0;
   bool islvds = false, issis  = false, chkdclkfirst = false;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   unsigned short crt2crtc = 0;
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned short pushcx;
 #endif
 
   if(ModeNo <= 0x13) {
      modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag;
      resinfo = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ResInfo;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
      crt2crtc = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC;
 #endif
   } else if(SiS_Pr->UseCustomMode) {
@@ -5375,7 +5375,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
   } else {
      modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
      resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
      crt2crtc = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
 #endif
   }
@@ -5396,7 +5396,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
      }
   }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if((SiS_Pr->ChipType >= SIS_315H) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) {
      if(IS_SIS330) {
         SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2D,0x10);
@@ -5646,7 +5646,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
 
   if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300      /* 300 series */
+#ifdef CONFIG_FB_SIS_300      /* 300 series */
      tempeax = SiS_Pr->SiS_VGAVDE << 6;
      temp = (tempeax % (unsigned int)SiS_Pr->SiS_VDE);
      tempeax = tempeax / (unsigned int)SiS_Pr->SiS_VDE;
@@ -5657,11 +5657,11 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
      temp = (unsigned short)(tempeax & 0x00FF);
      SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1E,temp);      	/* BPLVCFACT */
      tempvcfact = temp;
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
 
   } else {
 
-#ifdef SIS315H  /* 315 series */
+#ifdef CONFIG_FB_SIS_315  /* 315 series */
      tempeax = SiS_Pr->SiS_VGAVDE << 18;
      tempebx = SiS_Pr->SiS_VDE;
      temp = (tempeax % tempebx);
@@ -5747,7 +5747,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
   temp = (unsigned short)(tempecx & 0x00FF);
   SiS_SetReg(SiS_Pr->SiS_Part1Port,0x23,temp);
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if(SiS_Pr->ChipType >= SIS_315H) {
      if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) {
         if((islvds) || (SiS_Pr->SiS_VBInfo & VB_SISLVDS)) {
@@ -5765,7 +5765,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
   }
 #endif
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   if(SiS_Pr->SiS_IF_DEF_TRUMPION) {
      unsigned char *ROMAddr = SiS_Pr->VirtualRomBase;
      unsigned char *trumpdata;
@@ -5801,7 +5801,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
   }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if(SiS_Pr->SiS_IF_DEF_FSTN || SiS_Pr->SiS_IF_DEF_DSTN) {
      SiS_SetReg(SiS_Pr->SiS_Part1Port,0x25,0x00);
      SiS_SetReg(SiS_Pr->SiS_Part1Port,0x26,0x00);
@@ -5901,7 +5901,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
         SiS_SetReg(SiS_Pr->SiS_Part1Port,0x45,0x0a);
      }
   }
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 }
 
 /* Set Part 1 */
@@ -5909,12 +5909,12 @@ static void
 SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex,
 		unsigned short RefreshRateTableIndex)
 {
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
   unsigned char   *ROMAddr = SiS_Pr->VirtualRomBase;
 #endif
   unsigned short  temp=0, tempax=0, tempbx=0, tempcx=0, bridgeadd=0;
   unsigned short  pushbx=0, CRT1Index=0, modeflag, resinfo=0;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned short  tempbl=0;
 #endif
 
@@ -5940,11 +5940,11 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
          (SiS_Pr->SiS_VBInfo & SetInSlaveMode)) ) {
 
      if(SiS_Pr->ChipType < SIS_315H ) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	SiS_SetCRT2FIFO_300(SiS_Pr, ModeNo);
 #endif
      } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	SiS_SetCRT2FIFO_310(SiS_Pr);
 #endif
      }
@@ -5953,7 +5953,7 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
      if(SiS_Pr->ChipType < SIS_315H ) {
 
-#ifdef SIS300   /* ------------- 300 series --------------*/
+#ifdef CONFIG_FB_SIS_300   /* ------------- 300 series --------------*/
 
 	temp = (SiS_Pr->SiS_VGAHT - 1) & 0x0FF;   		  /* BTVGA2HT 0x08,0x09 */
 	SiS_SetReg(SiS_Pr->SiS_Part1Port,0x08,temp);              /* CRT2 Horizontal Total */
@@ -5972,11 +5972,11 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
 	bridgeadd = 12;
 
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
 
      } else {
 
-#ifdef SIS315H  /* ------------------- 315/330 series --------------- */
+#ifdef CONFIG_FB_SIS_315  /* ------------------- 315/330 series --------------- */
 
 	tempcx = SiS_Pr->SiS_VGAHT;				  /* BTVGA2HT 0x08,0x09 */
 	if(modeflag & HalfDCLK) {
@@ -6027,7 +6027,7 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 	   }
         }
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
      }  /* 315/330 series */
 
@@ -6158,7 +6158,7 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
      if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300  /* ---------- 300 series -------------- */
+#ifdef CONFIG_FB_SIS_300  /* ---------- 300 series -------------- */
 
 	if(SiS_Pr->SiS_VBType & VB_SISVB) {
 	   temp = 0x20;
@@ -6212,11 +6212,11 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
 	SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x13,~0x3C,temp);   /* Panel Link Delay Compensation; (Software Command Reset; Power Saving) */
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
      } else {
 
-#ifdef SIS315H   /* --------------- 315/330 series ---------------*/
+#ifdef CONFIG_FB_SIS_315   /* --------------- 315/330 series ---------------*/
 
 	if(SiS_Pr->ChipType < SIS_661) {
 
@@ -6251,7 +6251,7 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 	if(modeflag & HalfDCLK)       tempax |= 0x40;
 	SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2C,0x3f,tempax);
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
      }
 
@@ -6283,7 +6283,7 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 /*         SET PART 2 REGISTER GROUP         */
 /*********************************************/
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static unsigned char *
 SiS_GetGroup2CLVXPtr(struct SiS_Private *SiS_Pr, int tabletype)
 {
@@ -6380,7 +6380,7 @@ SiS_GetCRT2Part2Ptr(struct SiS_Private *SiS_Pr,unsigned short ModeNo,unsigned sh
 }
 #endif
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static void
 SiS_Group2LCDSpecial(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short crt2crtc)
 {
@@ -6592,7 +6592,7 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
   unsigned int   longtemp, PhaseIndex;
   bool           newtvphase;
   const unsigned char *TimingPoint;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned short resindex, CRT2Index;
   const struct SiS_Part2PortTbl *CRT2Part2Ptr = NULL;
 
@@ -6971,7 +6971,7 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
   SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x17,0xFB);
   SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x18,0xDF);
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if(SiS_GetCRT2Part2Ptr(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex,
                           			&CRT2Index, &resindex)) {
       switch(CRT2Index) {
@@ -7093,7 +7093,7 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,temp);
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
     SiS_Group2LCDSpecial(SiS_Pr, ModeNo, crt2crtc);
 #endif
 
@@ -7176,10 +7176,10 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
     SiS_SetGroup2_Tail(SiS_Pr, ModeNo);
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
     SiS_Set300Part2Regs(SiS_Pr, ModeIdIndex, RefreshRateTableIndex, ModeNo);
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   } /* CRT2-LCD from table */
 #endif
 }
@@ -7248,7 +7248,7 @@ SiS_SetGroup3(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 /*         SET PART 4 REGISTER GROUP         */
 /*********************************************/
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 #if 0
 static void
 SiS_ShiftXPos(struct SiS_Private *SiS_Pr, int shift)
@@ -7877,7 +7877,7 @@ SiS_SetCHTVReg(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
    if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) {
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 
       /* Chrontel 7005 - I assume that it does not come with a 315 series chip */
 
@@ -7990,7 +7990,7 @@ SiS_SetCHTVReg(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
       /* Chrontel 7019 - assumed that it does not come with a 300 series chip */
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 
       unsigned short temp;
 
@@ -8041,7 +8041,7 @@ SiS_SetCHTVReg(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
 }
 
-#ifdef SIS315H  /* ----------- 315 series only ---------- */
+#ifdef CONFIG_FB_SIS_315  /* ----------- 315 series only ---------- */
 
 void
 SiS_Chrontel701xBLOn(struct SiS_Private *SiS_Pr)
@@ -8523,7 +8523,7 @@ SiS_ChrontelDoSomething1(struct SiS_Private *SiS_Pr)
 bool
 SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    unsigned char  *ROMAddr  = SiS_Pr->VirtualRomBase;
 #endif
    unsigned short ModeIdIndex, RefreshRateTableIndex;
@@ -8578,12 +8578,12 @@ SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
       if(SiS_Pr->SiS_SetFlag & LowModeTests) {
 
 	 SiS_SetGroup2(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	 SiS_SetGroup2_C_ELV(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
 #endif
 	 SiS_SetGroup3(SiS_Pr, ModeNo, ModeIdIndex);
 	 SiS_SetGroup4(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	 SiS_SetGroup4_C_ELV(SiS_Pr, ModeNo, ModeIdIndex);
 #endif
 	 SiS_SetGroup5(SiS_Pr, ModeNo, ModeIdIndex);
@@ -8614,7 +8614,7 @@ SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 	 if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) {
 	    if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) {
 	       if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 		  SiS_SetCH701xForLCD(SiS_Pr);
 #endif
 	       }
@@ -8627,7 +8627,7 @@ SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 
    }
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    if(SiS_Pr->ChipType < SIS_315H) {
       if(SiS_Pr->SiS_SetFlag & LowModeTests) {
 	 if(SiS_Pr->SiS_UseOEM) {
@@ -8650,7 +8650,7 @@ SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
    }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType >= SIS_315H) {
       if(SiS_Pr->SiS_SetFlag & LowModeTests) {
 	 if(SiS_Pr->ChipType < SIS_661) {
@@ -8729,7 +8729,7 @@ SiS_SetupDDCN(struct SiS_Private *SiS_Pr)
   }
 }
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static unsigned char *
 SiS_SetTrumpBlockLoop(struct SiS_Private *SiS_Pr, unsigned char *dataptr)
 {
@@ -9456,7 +9456,7 @@ SiS_CheckACK(struct SiS_Private *SiS_Pr)
 
 /* =============== SiS 315/330 O.E.M. ================= */
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 
 static unsigned short
 GetRAMDACromptr(struct SiS_Private *SiS_Pr)
@@ -10644,7 +10644,7 @@ SiS_FinalizeLCD(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor
 
 /*  =================  SiS 300 O.E.M. ================== */
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 
 static void
 SetOEMLCDData2(struct SiS_Private *SiS_Pr, unsigned short ModeNo,unsigned short ModeIdIndex,
diff --git a/drivers/video/sis/init301.h b/drivers/video/sis/init301.h
index 31e24ae6c6e6..267715204b0f 100644
--- a/drivers/video/sis/init301.h
+++ b/drivers/video/sis/init301.h
@@ -230,7 +230,7 @@ static const unsigned char SiS_Part2CLVX_6[] = {   /* 1080i */
     0xFF,0xFF,
 };
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 /* 661 et al LCD data structure (2.03.00) */
 static const unsigned char SiS_LCDStruct661[] = {
     /* 1024x768 */
@@ -272,7 +272,7 @@ static const unsigned char SiS_LCDStruct661[] = {
 };
 #endif
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static unsigned char SiS300_TrumpionData[14][80] = {
   { 0x02,0x0A,0x0A,0x01,0x04,0x01,0x00,0x03,0x0D,0x00,0x0D,0x10,0x7F,0x00,0x80,0x02,
     0x20,0x03,0x0B,0x00,0x90,0x01,0xC1,0x01,0x60,0x0C,0x30,0x10,0x00,0x00,0x04,0x23,
@@ -375,7 +375,7 @@ void		SiS_SetCH701x(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned cha
 unsigned short	SiS_GetCH701x(struct SiS_Private *SiS_Pr, unsigned short tempax);
 void		SiS_SetCH70xxANDOR(struct SiS_Private *SiS_Pr, unsigned short reg,
 			unsigned char orval,unsigned short andval);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void	SiS_Chrontel701xOn(struct SiS_Private *SiS_Pr);
 static void	SiS_Chrontel701xOff(struct SiS_Private *SiS_Pr);
 static void	SiS_ChrontelInitTVVSync(struct SiS_Private *SiS_Pr);
@@ -384,7 +384,7 @@ void		SiS_Chrontel701xBLOn(struct SiS_Private *SiS_Pr);
 void		SiS_Chrontel701xBLOff(struct SiS_Private *SiS_Pr);
 #endif /* 315 */
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static  bool	SiS_SetTrumpionBlock(struct SiS_Private *SiS_Pr, unsigned char *dataptr);
 void		SiS_SetChrontelGPIO(struct SiS_Private *SiS_Pr, unsigned short myvbinfo);
 #endif
@@ -415,13 +415,13 @@ static unsigned short	SiS_PrepareDDC(struct SiS_Private *SiS_Pr);
 static void		SiS_SendACK(struct SiS_Private *SiS_Pr, unsigned short yesno);
 static unsigned short	SiS_DoProbeDDC(struct SiS_Private *SiS_Pr);
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static void		SiS_OEM300Setting(struct SiS_Private *SiS_Pr,
 				unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefTabindex);
 static void		SetOEMLCDData2(struct SiS_Private *SiS_Pr,
 				unsigned short ModeNo, unsigned short ModeIdIndex,unsigned short RefTableIndex);
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void		SiS_OEM310Setting(struct SiS_Private *SiS_Pr,
 				unsigned short ModeNo,unsigned short ModeIdIndex, unsigned short RRTI);
 static void		SiS_OEM661Setting(struct SiS_Private *SiS_Pr,
@@ -456,7 +456,7 @@ extern void		SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short M
 extern void		SiS_CalcCRRegisters(struct SiS_Private *SiS_Pr, int depth);
 extern unsigned short	SiS_GetRefCRTVCLK(struct SiS_Private *SiS_Pr, unsigned short Index, int UseWide);
 extern unsigned short	SiS_GetRefCRT1CRTC(struct SiS_Private *SiS_Pr, unsigned short Index, int UseWide);
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 extern void		SiS_GetFIFOThresholdIndex300(struct SiS_Private *SiS_Pr, unsigned short *tempbx,
 				unsigned short *tempcl);
 extern unsigned short	SiS_GetFIFOThresholdB300(unsigned short tempbx, unsigned short tempcl);
diff --git a/drivers/video/sis/initextlfb.c b/drivers/video/sis/initextlfb.c
index 99c04a4855d1..1975308151dd 100644
--- a/drivers/video/sis/initextlfb.c
+++ b/drivers/video/sis/initextlfb.c
@@ -59,7 +59,7 @@ sisfb_mode_rate_to_dclock(struct SiS_Private *SiS_Pr, unsigned char modeno,
 
     if(rateindex > 0) rateindex--;
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
     switch(ModeNo) {
     case 0x5a: ModeNo = 0x50; break;
     case 0x5b: ModeNo = 0x56;
@@ -103,7 +103,7 @@ sisfb_mode_rate_to_ddata(struct SiS_Private *SiS_Pr, unsigned char modeno,
 
     if(rateindex > 0) rateindex--;
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
     switch(ModeNo) {
        case 0x5a: ModeNo = 0x50; break;
        case 0x5b: ModeNo = 0x56;
@@ -187,7 +187,7 @@ sisfb_gettotalfrommode(struct SiS_Private *SiS_Pr, unsigned char modeno, int *ht
 
     if(rateindex > 0) rateindex--;
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
     switch(ModeNo) {
        case 0x5a: ModeNo = 0x50; break;
        case 0x5b: ModeNo = 0x56;
diff --git a/drivers/video/sis/osdef.h b/drivers/video/sis/osdef.h
index bc185a9a4d84..dae407cdb51a 100644
--- a/drivers/video/sis/osdef.h
+++ b/drivers/video/sis/osdef.h
@@ -82,15 +82,7 @@
 /*  LINUX KERNEL                                                      */
 /**********************************************************************/
 
-#ifdef CONFIG_FB_SIS_300
-#define SIS300
-#endif
-
-#ifdef CONFIG_FB_SIS_315
-#define SIS315H
-#endif
-
-#if !defined(SIS300) && !defined(SIS315H)
+#if !defined(CONFIG_FB_SIS_300) && !defined(CONFIG_FB_SIS_315)
 #warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is set
 #warning sisfb will not work!
 #endif

From 2ad28472695a940bbda8fa1aec8286f0df8f6c4f Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Fri, 19 Nov 2010 21:58:48 +0000
Subject: [PATCH 0914/1066] sisfb: remove InPort/OutPort wrappers

Remove register IO wrappers.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sis/init.c  | 20 ++++++++++----------
 drivers/video/sis/osdef.h | 30 ------------------------------
 2 files changed, 10 insertions(+), 40 deletions(-)

diff --git a/drivers/video/sis/init.c b/drivers/video/sis/init.c
index 8351151e3f27..bfc6a1a8eaa2 100644
--- a/drivers/video/sis/init.c
+++ b/drivers/video/sis/init.c
@@ -882,51 +882,51 @@ SiS_GetModeID_VGA2(int VGAEngine, unsigned int VBFlags, int HDisplay, int VDispl
 void
 SiS_SetReg(SISIOADDRESS port, unsigned short index, unsigned short data)
 {
-   OutPortByte(port, index);
-   OutPortByte(port + 1, data);
+	outb((u8)index, port);
+	outb((u8)data, port + 1);
 }
 
 void
 SiS_SetRegByte(SISIOADDRESS port, unsigned short data)
 {
-   OutPortByte(port, data);
+	outb((u8)data, port);
 }
 
 void
 SiS_SetRegShort(SISIOADDRESS port, unsigned short data)
 {
-   OutPortWord(port, data);
+	outw((u16)data, port);
 }
 
 void
 SiS_SetRegLong(SISIOADDRESS port, unsigned int data)
 {
-   OutPortLong(port, data);
+	outl((u32)data, port);
 }
 
 unsigned char
 SiS_GetReg(SISIOADDRESS port, unsigned short index)
 {
-   OutPortByte(port, index);
-   return(InPortByte(port + 1));
+	outb((u8)index, port);
+	return inb(port + 1);
 }
 
 unsigned char
 SiS_GetRegByte(SISIOADDRESS port)
 {
-   return(InPortByte(port));
+	return inb(port);
 }
 
 unsigned short
 SiS_GetRegShort(SISIOADDRESS port)
 {
-   return(InPortWord(port));
+	return inw(port);
 }
 
 unsigned int
 SiS_GetRegLong(SISIOADDRESS port)
 {
-   return(InPortLong(port));
+	return inl(port);
 }
 
 void
diff --git a/drivers/video/sis/osdef.h b/drivers/video/sis/osdef.h
index dae407cdb51a..be7f306515a1 100644
--- a/drivers/video/sis/osdef.h
+++ b/drivers/video/sis/osdef.h
@@ -54,30 +54,6 @@
 #ifndef _SIS_OSDEF_H_
 #define _SIS_OSDEF_H_
 
-#ifdef OutPortByte
-#undef OutPortByte
-#endif
-
-#ifdef OutPortWord
-#undef OutPortWord
-#endif
-
-#ifdef OutPortLong
-#undef OutPortLong
-#endif
-
-#ifdef InPortByte
-#undef InPortByte
-#endif
-
-#ifdef InPortWord
-#undef InPortWord
-#endif
-
-#ifdef InPortLong
-#undef InPortLong
-#endif
-
 /**********************************************************************/
 /*  LINUX KERNEL                                                      */
 /**********************************************************************/
@@ -87,12 +63,6 @@
 #warning sisfb will not work!
 #endif
 
-#define OutPortByte(p,v) outb((u8)(v),(SISIOADDRESS)(p))
-#define OutPortWord(p,v) outw((u16)(v),(SISIOADDRESS)(p))
-#define OutPortLong(p,v) outl((u32)(v),(SISIOADDRESS)(p))
-#define InPortByte(p)    inb((SISIOADDRESS)(p))
-#define InPortWord(p)    inw((SISIOADDRESS)(p))
-#define InPortLong(p)    inl((SISIOADDRESS)(p))
 #define SiS_SetMemory(MemoryAddress,MemorySize,value) memset_io(MemoryAddress, value, MemorySize)
 
 #endif  /* _OSDEF_H_ */

From ec49ec33e22885a255855c2f820b640afbd88ef4 Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Fri, 19 Nov 2010 21:58:49 +0000
Subject: [PATCH 0915/1066] sisfb: replace SiS_SetMemory with memset_io

Get rid of one more wrapper.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sis/init.c  | 4 ++--
 drivers/video/sis/osdef.h | 2 --
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/video/sis/init.c b/drivers/video/sis/init.c
index bfc6a1a8eaa2..31137adc8fba 100644
--- a/drivers/video/sis/init.c
+++ b/drivers/video/sis/init.c
@@ -1578,7 +1578,7 @@ SiS_ClearBuffer(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 
    if(SiS_Pr->SiS_ModeType >= ModeEGA) {
       if(ModeNo > 0x13) {
-	 SiS_SetMemory(memaddr, memsize, 0);
+	 memset_io(memaddr, 0, memsize);
       } else {
 	 pBuffer = (unsigned short SISIOMEMTYPE *)memaddr;
 	 for(i = 0; i < 0x4000; i++) writew(0x0000, &pBuffer[i]);
@@ -1587,7 +1587,7 @@ SiS_ClearBuffer(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
       pBuffer = (unsigned short SISIOMEMTYPE *)memaddr;
       for(i = 0; i < 0x4000; i++) writew(0x0720, &pBuffer[i]);
    } else {
-      SiS_SetMemory(memaddr, 0x8000, 0);
+      memset_io(memaddr, 0, 0x8000);
    }
 }
 
diff --git a/drivers/video/sis/osdef.h b/drivers/video/sis/osdef.h
index be7f306515a1..af5e9a29be9b 100644
--- a/drivers/video/sis/osdef.h
+++ b/drivers/video/sis/osdef.h
@@ -63,6 +63,4 @@
 #warning sisfb will not work!
 #endif
 
-#define SiS_SetMemory(MemoryAddress,MemorySize,value) memset_io(MemoryAddress, value, MemorySize)
-
 #endif  /* _OSDEF_H_ */

From 1f8e6eee81709cfd500ca05e36b8207566e58222 Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Fri, 19 Nov 2010 21:58:50 +0000
Subject: [PATCH 0916/1066] sisfb: move the CONFIG warning to sis_main.c

sis_main.c is always compiled, so we can check Kconfig options there.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sis/osdef.h    | 5 -----
 drivers/video/sis/sis_main.c | 5 +++++
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/video/sis/osdef.h b/drivers/video/sis/osdef.h
index af5e9a29be9b..5baaa79e71f8 100644
--- a/drivers/video/sis/osdef.h
+++ b/drivers/video/sis/osdef.h
@@ -58,9 +58,4 @@
 /*  LINUX KERNEL                                                      */
 /**********************************************************************/
 
-#if !defined(CONFIG_FB_SIS_300) && !defined(CONFIG_FB_SIS_315)
-#warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is set
-#warning sisfb will not work!
-#endif
-
 #endif  /* _OSDEF_H_ */
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 7feb6992c7cc..7e3370f115b6 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -60,6 +60,11 @@
 #include "sis.h"
 #include "sis_main.h"
 
+#if !defined(CONFIG_FB_SIS_300) && !defined(CONFIG_FB_SIS_315)
+#warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is set
+#warning sisfb will not work!
+#endif
+
 static void sisfb_handle_command(struct sis_video_info *ivideo,
 				 struct sisfb_cmd *sisfb_command);
 

From c07a1c6b0fc6408efda7b7f5d12f24a3eda6a5e8 Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Fri, 19 Nov 2010 21:58:51 +0000
Subject: [PATCH 0917/1066] sisfb: delete osdef.h

The file is not needed.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sis/init.h       |  1 -
 drivers/video/sis/init301.h    |  1 -
 drivers/video/sis/initextlfb.c |  1 -
 drivers/video/sis/osdef.h      | 61 ----------------------------------
 drivers/video/sis/sis.h        |  1 -
 5 files changed, 65 deletions(-)
 delete mode 100644 drivers/video/sis/osdef.h

diff --git a/drivers/video/sis/init.h b/drivers/video/sis/init.h
index 79aec28e49c4..ee8ed3c203da 100644
--- a/drivers/video/sis/init.h
+++ b/drivers/video/sis/init.h
@@ -53,7 +53,6 @@
 #ifndef _INIT_H_
 #define _INIT_H_
 
-#include "osdef.h"
 #include "initdef.h"
 
 #include "vgatypes.h"
diff --git a/drivers/video/sis/init301.h b/drivers/video/sis/init301.h
index 267715204b0f..e1fd31d0fddf 100644
--- a/drivers/video/sis/init301.h
+++ b/drivers/video/sis/init301.h
@@ -53,7 +53,6 @@
 #ifndef  _INIT301_H_
 #define  _INIT301_H_
 
-#include "osdef.h"
 #include "initdef.h"
 
 #include "vgatypes.h"
diff --git a/drivers/video/sis/initextlfb.c b/drivers/video/sis/initextlfb.c
index 1975308151dd..9dec64da4015 100644
--- a/drivers/video/sis/initextlfb.c
+++ b/drivers/video/sis/initextlfb.c
@@ -25,7 +25,6 @@
  * Author:	Thomas Winischhofer <thomas@winischhofer.net>
  */
 
-#include "osdef.h"
 #include "initdef.h"
 #include "vgatypes.h"
 #include "vstruct.h"
diff --git a/drivers/video/sis/osdef.h b/drivers/video/sis/osdef.h
deleted file mode 100644
index 5baaa79e71f8..000000000000
--- a/drivers/video/sis/osdef.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* $XFree86$ */
-/* $XdotOrg$ */
-/*
- * OS depending defines
- *
- * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria
- *
- * If distributed as part of the Linux kernel, the following license terms
- * apply:
- *
- * * This program is free software; you can redistribute it and/or modify
- * * it under the terms of the GNU General Public License as published by
- * * the Free Software Foundation; either version 2 of the named License,
- * * or any later version.
- * *
- * * This program is distributed in the hope that it will be useful,
- * * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * * GNU General Public License for more details.
- * *
- * * You should have received a copy of the GNU General Public License
- * * along with this program; if not, write to the Free Software
- * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
- *
- * Otherwise, the following license terms apply:
- *
- * * Redistribution and use in source and binary forms, with or without
- * * modification, are permitted provided that the following conditions
- * * are met:
- * * 1) Redistributions of source code must retain the above copyright
- * *    notice, this list of conditions and the following disclaimer.
- * * 2) Redistributions in binary form must reproduce the above copyright
- * *    notice, this list of conditions and the following disclaimer in the
- * *    documentation and/or other materials provided with the distribution.
- * * 3) The name of the author may not be used to endorse or promote products
- * *    derived from this software without specific prior written permission.
- * *
- * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * Author: 	Thomas Winischhofer <thomas@winischhofer.net>
- *		Silicon Integrated Systems, Inc. (used by permission)
- *
- */
-
-#ifndef _SIS_OSDEF_H_
-#define _SIS_OSDEF_H_
-
-/**********************************************************************/
-/*  LINUX KERNEL                                                      */
-/**********************************************************************/
-
-#endif  /* _OSDEF_H_ */
diff --git a/drivers/video/sis/sis.h b/drivers/video/sis/sis.h
index 7c5710e3fb56..80d89d37c414 100644
--- a/drivers/video/sis/sis.h
+++ b/drivers/video/sis/sis.h
@@ -24,7 +24,6 @@
 #ifndef _SIS_H_
 #define _SIS_H_
 
-#include "osdef.h"
 #include <video/sisfb.h>
 
 #include "vgatypes.h"

From 08b1a38465cab8c2224a5202c7a3b5e5f5630894 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 24 Nov 2010 10:20:33 +0800
Subject: [PATCH 0918/1066] ASoC: wm8961 - clear WM8961_DACSLOPE bit for normal
 mode

DACSLOPE bit of Register 06h ADC and DAC Control 2:
        0: Normal mode
        1: Sloping stop-band mode

Thus in the case of normal mode, we should clear DACSLOPE bit.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
---
 sound/soc/codecs/wm8961.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm8961.c b/sound/soc/codecs/wm8961.c
index 4f326f604104..93fecf5f94c6 100644
--- a/sound/soc/codecs/wm8961.c
+++ b/sound/soc/codecs/wm8961.c
@@ -711,7 +711,7 @@ static int wm8961_hw_params(struct snd_pcm_substream *substream,
 	if (fs <= 24000)
 		reg |= WM8961_DACSLOPE;
 	else
-		reg &= WM8961_DACSLOPE;
+		reg &= ~WM8961_DACSLOPE;
 	snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_2, reg);
 
 	return 0;

From 2f7dceeda4708f470fd927adb3861bd8ebbe2310 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 24 Nov 2010 10:21:54 +0800
Subject: [PATCH 0919/1066] ASoC: wm8961 - clear WM8961_MCLKDIV bit for freq <=
 16500000

MCLKDIV bit of Register 04h Clocking1:
	0 : Divide by 1
	1 : Divide by 2

Thus in the case of freq <= 16500000, we should clear MCLKDIV bit.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
---
 sound/soc/codecs/wm8961.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm8961.c b/sound/soc/codecs/wm8961.c
index 93fecf5f94c6..8340485c9851 100644
--- a/sound/soc/codecs/wm8961.c
+++ b/sound/soc/codecs/wm8961.c
@@ -736,7 +736,7 @@ static int wm8961_set_sysclk(struct snd_soc_dai *dai, int clk_id,
 		freq /= 2;
 	} else {
 		dev_dbg(codec->dev, "Using MCLK/1 for %dHz MCLK\n", freq);
-		reg &= WM8961_MCLKDIV;
+		reg &= ~WM8961_MCLKDIV;
 	}
 
 	snd_soc_write(codec, WM8961_CLOCKING1, reg);

From 5c12d20145ce30f9f8b7415d36dace5fb4dcc4f0 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 24 Nov 2010 15:20:48 +0800
Subject: [PATCH 0920/1066] ASoC: Return proper error for omap3pandora_soc_init

Return PTR_ERR(omap3pandora_dac_reg) instead of 0 if regulator_get failed.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/omap/omap3pandora.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c
index dbd9d96b5f92..4ee33ce2cb98 100644
--- a/sound/soc/omap/omap3pandora.c
+++ b/sound/soc/omap/omap3pandora.c
@@ -306,6 +306,7 @@ static int __init omap3pandora_soc_init(void)
 		pr_err(PREFIX "Failed to get DAC regulator from %s: %ld\n",
 			dev_name(&omap3pandora_snd_device->dev),
 			PTR_ERR(omap3pandora_dac_reg));
+		ret = PTR_ERR(omap3pandora_dac_reg);
 		goto fail3;
 	}
 

From d6f443ae4c1d54379ad5953d7bcb89a63387184d Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 24 Nov 2010 16:44:23 +0800
Subject: [PATCH 0921/1066] ASoC: nuc900-ac97: fix a memory leak

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/nuc900/nuc900-ac97.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/nuc900/nuc900-ac97.c b/sound/soc/nuc900/nuc900-ac97.c
index 293dc748797c..e00e39dd6576 100644
--- a/sound/soc/nuc900/nuc900-ac97.c
+++ b/sound/soc/nuc900/nuc900-ac97.c
@@ -384,7 +384,6 @@ out0:
 
 static int __devexit nuc900_ac97_drvremove(struct platform_device *pdev)
 {
-
 	snd_soc_unregister_dai(&pdev->dev);
 
 	clk_put(nuc900_ac97_data->clk);
@@ -392,6 +391,7 @@ static int __devexit nuc900_ac97_drvremove(struct platform_device *pdev)
 	release_mem_region(nuc900_ac97_data->res->start,
 				resource_size(nuc900_ac97_data->res));
 
+	kfree(nuc900_ac97_data);
 	nuc900_ac97_data = NULL;
 
 	return 0;

From cc1c452e509aefc28f7ad2deed75bc69d4f915f7 Mon Sep 17 00:00:00 2001
From: David Henningsson <david.henningsson@canonical.com>
Date: Wed, 24 Nov 2010 14:17:47 +0100
Subject: [PATCH 0922/1066] ALSA: HDA: Add an extra DAC for Realtek ALC887-VD

The patch enables ALC887-VD to use the DAC at nid 0x26,
which makes it possible to use this DAC for e g Headphone
volume.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 8f7530fc7644..b0e6b8b47fa9 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -18997,6 +18997,8 @@ static inline hda_nid_t alc662_mix_to_dac(hda_nid_t nid)
 		return 0x02;
 	else if (nid >= 0x0c && nid <= 0x0e)
 		return nid - 0x0c + 0x02;
+	else if (nid == 0x26) /* ALC887-VD has this DAC too */
+		return 0x25;
 	else
 		return 0;
 }
@@ -19005,7 +19007,7 @@ static inline hda_nid_t alc662_mix_to_dac(hda_nid_t nid)
 static hda_nid_t alc662_dac_to_mix(struct hda_codec *codec, hda_nid_t pin,
 				   hda_nid_t dac)
 {
-	hda_nid_t mix[4];
+	hda_nid_t mix[5];
 	int i, num;
 
 	num = snd_hda_get_connections(codec, pin, mix, ARRAY_SIZE(mix));

From 5b5c1af104ab5adec1be9dcb4c787492d83d8d83 Mon Sep 17 00:00:00 2001
From: Ian Campbell <ian.campbell@citrix.com>
Date: Wed, 24 Nov 2010 12:09:41 +0000
Subject: [PATCH 0923/1066] xen: x86/32: perform initial startup on
 initial_page_table

Only make swapper_pg_dir readonly and pinned when generic x86 architecture code
(which also starts on initial_page_table) switches to it.  This helps ensure
that the generic setup paths work on Xen unmodified. In particular
clone_pgd_range writes directly to the destination pgd entries and is used to
initialise swapper_pg_dir so we need to ensure that it remains writeable until
the last possible moment during bring up.

This is complicated slightly by the need to avoid sharing kernel PMD entries
when running under Xen, therefore the Xen implementation must make a copy of
the kernel PMD (which is otherwise referred to by both intial_page_table and
swapper_pg_dir) before switching to swapper_pg_dir.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/xen/enlighten.c |  2 --
 arch/x86/xen/mmu.c       | 69 ++++++++++++++++++++++++++++++++--------
 2 files changed, 56 insertions(+), 15 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 235c0f4d3861..ff82909801b6 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1191,8 +1191,6 @@ asmlinkage void __init xen_start_kernel(void)
 	/* Allocate and initialize top and mid mfn levels for p2m structure */
 	xen_build_mfn_list_list();
 
-	init_mm.pgd = pgd;
-
 	/* keep using Xen gdt for now; no urgent need to change it */
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 21ed8d7f75a5..c9cf23e17440 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -2119,44 +2119,83 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
 	return pgd;
 }
 #else	/* !CONFIG_X86_64 */
-static RESERVE_BRK_ARRAY(pmd_t, level2_kernel_pgt, PTRS_PER_PMD);
+static RESERVE_BRK_ARRAY(pmd_t, initial_kernel_pmd, PTRS_PER_PMD);
+static RESERVE_BRK_ARRAY(pmd_t, swapper_kernel_pmd, PTRS_PER_PMD);
+
+static __init void xen_write_cr3_init(unsigned long cr3)
+{
+	unsigned long pfn = PFN_DOWN(__pa(swapper_pg_dir));
+
+	BUG_ON(read_cr3() != __pa(initial_page_table));
+	BUG_ON(cr3 != __pa(swapper_pg_dir));
+
+	/*
+	 * We are switching to swapper_pg_dir for the first time (from
+	 * initial_page_table) and therefore need to mark that page
+	 * read-only and then pin it.
+	 *
+	 * Xen disallows sharing of kernel PMDs for PAE
+	 * guests. Therefore we must copy the kernel PMD from
+	 * initial_page_table into a new kernel PMD to be used in
+	 * swapper_pg_dir.
+	 */
+	swapper_kernel_pmd =
+		extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
+	memcpy(swapper_kernel_pmd, initial_kernel_pmd,
+	       sizeof(pmd_t) * PTRS_PER_PMD);
+	swapper_pg_dir[KERNEL_PGD_BOUNDARY] =
+		__pgd(__pa(swapper_kernel_pmd) | _PAGE_PRESENT);
+	set_page_prot(swapper_kernel_pmd, PAGE_KERNEL_RO);
+
+	set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+	xen_write_cr3(cr3);
+	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, pfn);
+
+	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE,
+			  PFN_DOWN(__pa(initial_page_table)));
+	set_page_prot(initial_page_table, PAGE_KERNEL);
+	set_page_prot(initial_kernel_pmd, PAGE_KERNEL);
+
+	pv_mmu_ops.write_cr3 = &xen_write_cr3;
+}
 
 __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
 					 unsigned long max_pfn)
 {
 	pmd_t *kernel_pmd;
 
-	level2_kernel_pgt = extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
+	initial_kernel_pmd =
+		extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
 
 	max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) +
 				  xen_start_info->nr_pt_frames * PAGE_SIZE +
 				  512*1024);
 
 	kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
-	memcpy(level2_kernel_pgt, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
+	memcpy(initial_kernel_pmd, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
 
-	xen_map_identity_early(level2_kernel_pgt, max_pfn);
+	xen_map_identity_early(initial_kernel_pmd, max_pfn);
 
-	memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
-	set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY],
-			__pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT));
+	memcpy(initial_page_table, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
+	initial_page_table[KERNEL_PGD_BOUNDARY] =
+		__pgd(__pa(initial_kernel_pmd) | _PAGE_PRESENT);
 
-	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
-	set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+	set_page_prot(initial_kernel_pmd, PAGE_KERNEL_RO);
+	set_page_prot(initial_page_table, PAGE_KERNEL_RO);
 	set_page_prot(empty_zero_page, PAGE_KERNEL_RO);
 
 	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
 
-	xen_write_cr3(__pa(swapper_pg_dir));
-
-	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
+	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE,
+			  PFN_DOWN(__pa(initial_page_table)));
+	xen_write_cr3(__pa(initial_page_table));
 
 	memblock_x86_reserve_range(__pa(xen_start_info->pt_base),
 		      __pa(xen_start_info->pt_base +
 			   xen_start_info->nr_pt_frames * PAGE_SIZE),
 		      "XEN PAGETABLES");
 
-	return swapper_pg_dir;
+	return initial_page_table;
 }
 #endif	/* CONFIG_X86_64 */
 
@@ -2290,7 +2329,11 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.write_cr2 = xen_write_cr2,
 
 	.read_cr3 = xen_read_cr3,
+#ifdef CONFIG_X86_32
+	.write_cr3 = xen_write_cr3_init,
+#else
 	.write_cr3 = xen_write_cr3,
+#endif
 
 	.flush_tlb_user = xen_flush_tlb,
 	.flush_tlb_kernel = xen_flush_tlb,

From e6d4a76dbf2ff27314e09291dfb9e4afcb9ecd60 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 20 Nov 2010 20:05:46 +0800
Subject: [PATCH 0924/1066] xen: remove duplicated #include

Remove duplicated #include('s) in
  arch/x86/xen/setup.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/xen/setup.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 769c4b01fa32..d392486179e7 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -23,7 +23,6 @@
 #include <xen/interface/callback.h>
 #include <xen/interface/memory.h>
 #include <xen/interface/physdev.h>
-#include <xen/interface/memory.h>
 #include <xen/features.h>
 
 #include "xen-ops.h"

From 9915672d41273f5b77f1b3c29b391ffb7732b84b Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Wed, 24 Nov 2010 09:15:27 -0800
Subject: [PATCH 0925/1066] af_unix: limit unix_tot_inflight

Vegard Nossum found a unix socket OOM was possible, posting an exploit
program.

My analysis is we can eat all LOWMEM memory before unix_gc() being
called from unix_release_sock(). Moreover, the thread blocked in
unix_gc() can consume huge amount of time to perform cleanup because of
huge working set.

One way to handle this is to have a sensible limit on unix_tot_inflight,
tested from wait_for_unix_gc() and to force a call to unix_gc() if this
limit is hit.

This solves the OOM and also reduce overall latencies, and should not
slowdown normal workloads.

Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/unix/garbage.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/net/unix/garbage.c b/net/unix/garbage.c
index c8df6fda0b1f..40df93d1cf35 100644
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -259,9 +259,16 @@ static void inc_inflight_move_tail(struct unix_sock *u)
 }
 
 static bool gc_in_progress = false;
+#define UNIX_INFLIGHT_TRIGGER_GC 16000
 
 void wait_for_unix_gc(void)
 {
+	/*
+	 * If number of inflight sockets is insane,
+	 * force a garbage collect right now.
+	 */
+	if (unix_tot_inflight > UNIX_INFLIGHT_TRIGGER_GC && !gc_in_progress)
+		unix_gc();
 	wait_event(unix_gc_wait, gc_in_progress == false);
 }
 

From e5a06939736277c54a68ae275433db55b99d187c Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Mon, 1 Nov 2010 17:00:37 -0400
Subject: [PATCH 0926/1066] drivers/net/tile/: on-chip network drivers for the
 tile architecture

This change adds the first network driver for the tile architecture,
supporting the on-chip XGBE and GBE shims.

The infrastructure is present for the TILE-Gx networking drivers (another
three source files in the new directory) but for now the the actual
tilegx sources are waiting on releasing hardware to initial customers.

Note that arch/tile/include/hv/* are "upstream" headers from the
Tilera hypervisor and will probably benefit less from LKML review.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 MAINTAINERS                          |    1 +
 arch/tile/include/asm/cacheflush.h   |   52 +
 arch/tile/include/asm/processor.h    |   10 +
 arch/tile/include/hv/drv_xgbe_impl.h |  300 +++
 arch/tile/include/hv/drv_xgbe_intf.h |  615 ++++++
 arch/tile/include/hv/netio_errors.h  |  122 ++
 arch/tile/include/hv/netio_intf.h    | 2975 ++++++++++++++++++++++++++
 arch/tile/mm/init.c                  |    8 +-
 drivers/net/Kconfig                  |   12 +
 drivers/net/Makefile                 |    1 +
 drivers/net/tile/Makefile            |   10 +
 drivers/net/tile/tilepro.c           | 2406 +++++++++++++++++++++
 12 files changed, 6510 insertions(+), 2 deletions(-)
 create mode 100644 arch/tile/include/hv/drv_xgbe_impl.h
 create mode 100644 arch/tile/include/hv/drv_xgbe_intf.h
 create mode 100644 arch/tile/include/hv/netio_errors.h
 create mode 100644 arch/tile/include/hv/netio_intf.h
 create mode 100644 drivers/net/tile/Makefile
 create mode 100644 drivers/net/tile/tilepro.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 2525b04f2e25..70b3820aa58e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5828,6 +5828,7 @@ W:	http://www.tilera.com/scm/
 S:	Supported
 F:	arch/tile/
 F:	drivers/char/hvc_tile.c
+F:	drivers/net/tile/
 
 TLAN NETWORK DRIVER
 M:	Samuel Chessman <chessman@tux.org>
diff --git a/arch/tile/include/asm/cacheflush.h b/arch/tile/include/asm/cacheflush.h
index c5741da4eeac..14a3f8556ace 100644
--- a/arch/tile/include/asm/cacheflush.h
+++ b/arch/tile/include/asm/cacheflush.h
@@ -137,4 +137,56 @@ static inline void finv_buffer(void *buffer, size_t size)
 	mb_incoherent();
 }
 
+/*
+ * Flush & invalidate a VA range that is homed remotely on a single core,
+ * waiting until the memory controller holds the flushed values.
+ */
+static inline void finv_buffer_remote(void *buffer, size_t size)
+{
+	char *p;
+	int i;
+
+	/*
+	 * Flush and invalidate the buffer out of the local L1/L2
+	 * and request the home cache to flush and invalidate as well.
+	 */
+	__finv_buffer(buffer, size);
+
+	/*
+	 * Wait for the home cache to acknowledge that it has processed
+	 * all the flush-and-invalidate requests.  This does not mean
+	 * that the flushed data has reached the memory controller yet,
+	 * but it does mean the home cache is processing the flushes.
+	 */
+	__insn_mf();
+
+	/*
+	 * Issue a load to the last cache line, which can't complete
+	 * until all the previously-issued flushes to the same memory
+	 * controller have also completed.  If we weren't striping
+	 * memory, that one load would be sufficient, but since we may
+	 * be, we also need to back up to the last load issued to
+	 * another memory controller, which would be the point where
+	 * we crossed an 8KB boundary (the granularity of striping
+	 * across memory controllers).  Keep backing up and doing this
+	 * until we are before the beginning of the buffer, or have
+	 * hit all the controllers.
+	 */
+	for (i = 0, p = (char *)buffer + size - 1;
+	     i < (1 << CHIP_LOG_NUM_MSHIMS()) && p >= (char *)buffer;
+	     ++i) {
+		const unsigned long STRIPE_WIDTH = 8192;
+
+		/* Force a load instruction to issue. */
+		*(volatile char *)p;
+
+		/* Jump to end of previous stripe. */
+		p -= STRIPE_WIDTH;
+		p = (char *)((unsigned long)p | (STRIPE_WIDTH - 1));
+	}
+
+	/* Wait for the loads (and thus flushes) to have completed. */
+	__insn_mf();
+}
+
 #endif /* _ASM_TILE_CACHEFLUSH_H */
diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h
index 1747ff3946b2..a9e7c8760334 100644
--- a/arch/tile/include/asm/processor.h
+++ b/arch/tile/include/asm/processor.h
@@ -292,8 +292,18 @@ extern int kstack_hash;
 /* Are we using huge pages in the TLB for kernel data? */
 extern int kdata_huge;
 
+/* Support standard Linux prefetching. */
+#define ARCH_HAS_PREFETCH
+#define prefetch(x) __builtin_prefetch(x)
 #define PREFETCH_STRIDE CHIP_L2_LINE_SIZE()
 
+/* Bring a value into the L1D, faulting the TLB if necessary. */
+#ifdef __tilegx__
+#define prefetch_L1(x) __insn_prefetch_l1_fault((void *)(x))
+#else
+#define prefetch_L1(x) __insn_prefetch_L1((void *)(x))
+#endif
+
 #else /* __ASSEMBLY__ */
 
 /* Do some slow action (e.g. read a slow SPR). */
diff --git a/arch/tile/include/hv/drv_xgbe_impl.h b/arch/tile/include/hv/drv_xgbe_impl.h
new file mode 100644
index 000000000000..3a73b2b44913
--- /dev/null
+++ b/arch/tile/include/hv/drv_xgbe_impl.h
@@ -0,0 +1,300 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * @file drivers/xgbe/impl.h
+ * Implementation details for the NetIO library.
+ */
+
+#ifndef __DRV_XGBE_IMPL_H__
+#define __DRV_XGBE_IMPL_H__
+
+#include <hv/netio_errors.h>
+#include <hv/netio_intf.h>
+#include <hv/drv_xgbe_intf.h>
+
+
+/** How many groups we have (log2). */
+#define LOG2_NUM_GROUPS (12)
+/** How many groups we have. */
+#define NUM_GROUPS (1 << LOG2_NUM_GROUPS)
+
+/** Number of output requests we'll buffer per tile. */
+#define EPP_REQS_PER_TILE (32)
+
+/** Words used in an eDMA command without checksum acceleration. */
+#define EDMA_WDS_NO_CSUM      8
+/** Words used in an eDMA command with checksum acceleration. */
+#define EDMA_WDS_CSUM        10
+/** Total available words in the eDMA command FIFO. */
+#define EDMA_WDS_TOTAL      128
+
+
+/*
+ * FIXME: These definitions are internal and should have underscores!
+ * NOTE: The actual numeric values here are intentional and allow us to
+ * optimize the concept "if small ... else if large ... else ...", by
+ * checking for the low bit being set, and then for non-zero.
+ * These are used as array indices, so they must have the values (0, 1, 2)
+ * in some order.
+ */
+#define SIZE_SMALL (1)       /**< Small packet queue. */
+#define SIZE_LARGE (2)       /**< Large packet queue. */
+#define SIZE_JUMBO (0)       /**< Jumbo packet queue. */
+
+/** The number of "SIZE_xxx" values. */
+#define NETIO_NUM_SIZES 3
+
+
+/*
+ * Default numbers of packets for IPP drivers.  These values are chosen
+ * such that CIPP1 will not overflow its L2 cache.
+ */
+
+/** The default number of small packets. */
+#define NETIO_DEFAULT_SMALL_PACKETS 2750
+/** The default number of large packets. */
+#define NETIO_DEFAULT_LARGE_PACKETS 2500
+/** The default number of jumbo packets. */
+#define NETIO_DEFAULT_JUMBO_PACKETS 250
+
+
+/** Log2 of the size of a memory arena. */
+#define NETIO_ARENA_SHIFT      24      /* 16 MB */
+/** Size of a memory arena. */
+#define NETIO_ARENA_SIZE       (1 << NETIO_ARENA_SHIFT)
+
+
+/** A queue of packets.
+ *
+ * This structure partially defines a queue of packets waiting to be
+ * processed.  The queue as a whole is written to by an interrupt handler and
+ * read by non-interrupt code; this data structure is what's touched by the
+ * interrupt handler.  The other part of the queue state, the read offset, is
+ * kept in user space, not in hypervisor space, so it is in a separate data
+ * structure.
+ *
+ * The read offset (__packet_receive_read in the user part of the queue
+ * structure) points to the next packet to be read. When the read offset is
+ * equal to the write offset, the queue is empty; therefore the queue must
+ * contain one more slot than the required maximum queue size.
+ *
+ * Here's an example of all 3 state variables and what they mean.  All
+ * pointers move left to right.
+ *
+ * @code
+ *   I   I   V   V   V   V   I   I   I   I
+ *   0   1   2   3   4   5   6   7   8   9  10
+ *           ^       ^       ^               ^
+ *           |               |               |
+ *           |               |               __last_packet_plus_one
+ *           |               __buffer_write
+ *           __packet_receive_read
+ * @endcode
+ *
+ * This queue has 10 slots, and thus can hold 9 packets (_last_packet_plus_one
+ * = 10).  The read pointer is at 2, and the write pointer is at 6; thus,
+ * there are valid, unread packets in slots 2, 3, 4, and 5.  The remaining
+ * slots are invalid (do not contain a packet).
+ */
+typedef struct {
+  /** Byte offset of the next notify packet to be written: zero for the first
+   *  packet on the queue, sizeof (netio_pkt_t) for the second packet on the
+   *  queue, etc. */
+  volatile uint32_t __packet_write;
+
+  /** Offset of the packet after the last valid packet (i.e., when any
+   *  pointer is incremented to this value, it wraps back to zero). */
+  uint32_t __last_packet_plus_one;
+}
+__netio_packet_queue_t;
+
+
+/** A queue of buffers.
+ *
+ * This structure partially defines a queue of empty buffers which have been
+ * obtained via requests to the IPP.  (The elements of the queue are packet
+ * handles, which are transformed into a full netio_pkt_t when the buffer is
+ * retrieved.)  The queue as a whole is written to by an interrupt handler and
+ * read by non-interrupt code; this data structure is what's touched by the
+ * interrupt handler.  The other parts of the queue state, the read offset and
+ * requested write offset, are kept in user space, not in hypervisor space, so
+ * they are in a separate data structure.
+ *
+ * The read offset (__buffer_read in the user part of the queue structure)
+ * points to the next buffer to be read. When the read offset is equal to the
+ * write offset, the queue is empty; therefore the queue must contain one more
+ * slot than the required maximum queue size.
+ *
+ * The requested write offset (__buffer_requested_write in the user part of
+ * the queue structure) points to the slot which will hold the next buffer we
+ * request from the IPP, once we get around to sending such a request.  When
+ * the requested write offset is equal to the write offset, no requests for
+ * new buffers are outstanding; when the requested write offset is one greater
+ * than the read offset, no more requests may be sent.
+ *
+ * Note that, unlike the packet_queue, the buffer_queue places incoming
+ * buffers at decreasing addresses.  This makes the check for "is it time to
+ * wrap the buffer pointer" cheaper in the assembly code which receives new
+ * buffers, and means that the value which defines the queue size,
+ * __last_buffer, is different than in the packet queue.  Also, the offset
+ * used in the packet_queue is already scaled by the size of a packet; here we
+ * use unscaled slot indices for the offsets.  (These differences are
+ * historical, and in the future it's possible that the packet_queue will look
+ * more like this queue.)
+ *
+ * @code
+ * Here's an example of all 4 state variables and what they mean.  Remember:
+ * all pointers move right to left.
+ *
+ *   V   V   V   I   I   R   R   V   V   V
+ *   0   1   2   3   4   5   6   7   8   9
+ *           ^       ^       ^           ^
+ *           |       |       |           |
+ *           |       |       |           __last_buffer
+ *           |       |       __buffer_write
+ *           |       __buffer_requested_write
+ *           __buffer_read
+ * @endcode
+ *
+ * This queue has 10 slots, and thus can hold 9 buffers (_last_buffer = 9).
+ * The read pointer is at 2, and the write pointer is at 6; thus, there are
+ * valid, unread buffers in slots 2, 1, 0, 9, 8, and 7.  The requested write
+ * pointer is at 4; thus, requests have been made to the IPP for buffers which
+ * will be placed in slots 6 and 5 when they arrive.  Finally, the remaining
+ * slots are invalid (do not contain a buffer).
+ */
+typedef struct
+{
+  /** Ordinal number of the next buffer to be written: 0 for the first slot in
+   *  the queue, 1 for the second slot in the queue, etc. */
+  volatile uint32_t __buffer_write;
+
+  /** Ordinal number of the last buffer (i.e., when any pointer is decremented
+   *  below zero, it is reloaded with this value). */
+  uint32_t __last_buffer;
+}
+__netio_buffer_queue_t;
+
+
+/**
+ * An object for providing Ethernet packets to a process.
+ */
+typedef struct __netio_queue_impl_t
+{
+  /** The queue of packets waiting to be received. */
+  __netio_packet_queue_t __packet_receive_queue;
+  /** The intr bit mask that IDs this device. */
+  unsigned int __intr_id;
+  /** Offset to queues of empty buffers, one per size. */
+  uint32_t __buffer_queue[NETIO_NUM_SIZES];
+  /** The address of the first EPP tile, or -1 if no EPP. */
+  /* ISSUE: Actually this is always "0" or "~0". */
+  uint32_t __epp_location;
+  /** The queue ID that this queue represents. */
+  unsigned int __queue_id;
+  /** Number of acknowledgements received. */
+  volatile uint32_t __acks_received;
+  /** Last completion number received for packet_sendv. */
+  volatile uint32_t __last_completion_rcv;
+  /** Number of packets allowed to be outstanding. */
+  uint32_t __max_outstanding;
+  /** First VA available for packets. */
+  void* __va_0;
+  /** First VA in second range available for packets. */
+  void* __va_1;
+  /** Padding to align the "__packets" field to the size of a netio_pkt_t. */
+  uint32_t __padding[3];
+  /** The packets themselves. */
+  netio_pkt_t __packets[0];
+}
+netio_queue_impl_t;
+
+
+/**
+ * An object for managing the user end of a NetIO queue.
+ */
+typedef struct __netio_queue_user_impl_t
+{
+  /** The next incoming packet to be read. */
+  uint32_t __packet_receive_read;
+  /** The next empty buffers to be read, one index per size. */
+  uint8_t __buffer_read[NETIO_NUM_SIZES];
+  /** Where the empty buffer we next request from the IPP will go, one index
+   * per size. */
+  uint8_t __buffer_requested_write[NETIO_NUM_SIZES];
+  /** PCIe interface flag. */
+  uint8_t __pcie;
+  /** Number of packets left to be received before we send a credit update. */
+  uint32_t __receive_credit_remaining;
+  /** Value placed in __receive_credit_remaining when it reaches zero. */
+  uint32_t __receive_credit_interval;
+  /** First fast I/O routine index. */
+  uint32_t __fastio_index;
+  /** Number of acknowledgements expected. */
+  uint32_t __acks_outstanding;
+  /** Last completion number requested. */
+  uint32_t __last_completion_req;
+  /** File descriptor for driver. */
+  int __fd;
+}
+netio_queue_user_impl_t;
+
+
+#define NETIO_GROUP_CHUNK_SIZE   64   /**< Max # groups in one IPP request */
+#define NETIO_BUCKET_CHUNK_SIZE  64   /**< Max # buckets in one IPP request */
+
+
+/** Internal structure used to convey packet send information to the
+ * hypervisor.  FIXME: Actually, it's not used for that anymore, but
+ * netio_packet_send() still uses it internally.
+ */
+typedef struct
+{
+  uint16_t flags;              /**< Packet flags (__NETIO_SEND_FLG_xxx) */
+  uint16_t transfer_size;      /**< Size of packet */
+  uint32_t va;                 /**< VA of start of packet */
+  __netio_pkt_handle_t handle; /**< Packet handle */
+  uint32_t csum0;              /**< First checksum word */
+  uint32_t csum1;              /**< Second checksum word */
+}
+__netio_send_cmd_t;
+
+
+/** Flags used in two contexts:
+ *  - As the "flags" member in the __netio_send_cmd_t, above; used only
+ *    for netio_pkt_send_{prepare,commit}.
+ *  - As part of the flags passed to the various send packet fast I/O calls.
+ */
+
+/** Need acknowledgement on this packet.  Note that some code in the
+ *  normal send_pkt fast I/O handler assumes that this is equal to 1. */
+#define __NETIO_SEND_FLG_ACK    0x1
+
+/** Do checksum on this packet.  (Only used with the __netio_send_cmd_t;
+ *  normal packet sends use a special fast I/O index to denote checksumming,
+ *  and multi-segment sends test the checksum descriptor.) */
+#define __NETIO_SEND_FLG_CSUM   0x2
+
+/** Get a completion on this packet.  Only used with multi-segment sends.  */
+#define __NETIO_SEND_FLG_COMPLETION 0x4
+
+/** Position of the number-of-extra-segments value in the flags word.
+    Only used with multi-segment sends. */
+#define __NETIO_SEND_FLG_XSEG_SHIFT 3
+
+/** Width of the number-of-extra-segments value in the flags word. */
+#define __NETIO_SEND_FLG_XSEG_WIDTH 2
+
+#endif /* __DRV_XGBE_IMPL_H__ */
diff --git a/arch/tile/include/hv/drv_xgbe_intf.h b/arch/tile/include/hv/drv_xgbe_intf.h
new file mode 100644
index 000000000000..146e47d5334b
--- /dev/null
+++ b/arch/tile/include/hv/drv_xgbe_intf.h
@@ -0,0 +1,615 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * @file drv_xgbe_intf.h
+ * Interface to the hypervisor XGBE driver.
+ */
+
+#ifndef __DRV_XGBE_INTF_H__
+#define __DRV_XGBE_INTF_H__
+
+/**
+ * An object for forwarding VAs and PAs to the hypervisor.
+ * @ingroup types
+ *
+ * This allows the supervisor to specify a number of areas of memory to
+ * store packet buffers.
+ */
+typedef struct
+{
+  /** The physical address of the memory. */
+  HV_PhysAddr pa;
+  /** Page table entry for the memory.  This is only used to derive the
+   *  memory's caching mode; the PA bits are ignored. */
+  HV_PTE pte;
+  /** The virtual address of the memory. */
+  HV_VirtAddr va;
+  /** Size (in bytes) of the memory area. */
+  int size;
+
+}
+netio_ipp_address_t;
+
+/** The various pread/pwrite offsets into the hypervisor-level driver.
+ * @ingroup types
+ */
+typedef enum
+{
+  /** Inform the Linux driver of the address of the NetIO arena memory.
+   *  This offset is actually only used to convey information from netio
+   *  to the Linux driver; it never makes it from there to the hypervisor.
+   *  Write-only; takes a uint32_t specifying the VA address. */
+  NETIO_FIXED_ADDR               = 0x5000000000000000ULL,
+
+  /** Inform the Linux driver of the size of the NetIO arena memory.
+   *  This offset is actually only used to convey information from netio
+   *  to the Linux driver; it never makes it from there to the hypervisor.
+   *  Write-only; takes a uint32_t specifying the VA size. */
+  NETIO_FIXED_SIZE               = 0x5100000000000000ULL,
+
+  /** Register current tile with IPP.  Write then read: write, takes a
+   *  netio_input_config_t, read returns a pointer to a netio_queue_impl_t. */
+  NETIO_IPP_INPUT_REGISTER_OFF   = 0x6000000000000000ULL,
+
+  /** Unregister current tile from IPP.  Write-only, takes a dummy argument. */
+  NETIO_IPP_INPUT_UNREGISTER_OFF = 0x6100000000000000ULL,
+
+  /** Start packets flowing.  Write-only, takes a dummy argument. */
+  NETIO_IPP_INPUT_INIT_OFF       = 0x6200000000000000ULL,
+
+  /** Stop packets flowing.  Write-only, takes a dummy argument. */
+  NETIO_IPP_INPUT_UNINIT_OFF     = 0x6300000000000000ULL,
+
+  /** Configure group (typically we group on VLAN).  Write-only: takes an
+   *  array of netio_group_t's, low 24 bits of the offset is the base group
+   *  number times the size of a netio_group_t. */
+  NETIO_IPP_INPUT_GROUP_CFG_OFF  = 0x6400000000000000ULL,
+
+  /** Configure bucket.  Write-only: takes an array of netio_bucket_t's, low
+   *  24 bits of the offset is the base bucket number times the size of a
+   *  netio_bucket_t. */
+  NETIO_IPP_INPUT_BUCKET_CFG_OFF = 0x6500000000000000ULL,
+
+  /** Get/set a parameter.  Read or write: read or write data is the parameter
+   *  value, low 32 bits of the offset is a __netio_getset_offset_t. */
+  NETIO_IPP_PARAM_OFF            = 0x6600000000000000ULL,
+
+  /** Get fast I/O index.  Read-only; returns a 4-byte base index value. */
+  NETIO_IPP_GET_FASTIO_OFF       = 0x6700000000000000ULL,
+
+  /** Configure hijack IP address.  Packets with this IPv4 dest address
+   *  go to bucket NETIO_NUM_BUCKETS - 1.  Write-only: takes an IP address
+   *  in some standard form.  FIXME: Define the form! */
+  NETIO_IPP_INPUT_HIJACK_CFG_OFF  = 0x6800000000000000ULL,
+
+  /**
+   * Offsets beyond this point are reserved for the supervisor (although that
+   * enforcement must be done by the supervisor driver itself).
+   */
+  NETIO_IPP_USER_MAX_OFF         = 0x6FFFFFFFFFFFFFFFULL,
+
+  /** Register I/O memory.  Write-only, takes a netio_ipp_address_t. */
+  NETIO_IPP_IOMEM_REGISTER_OFF   = 0x7000000000000000ULL,
+
+  /** Unregister I/O memory.  Write-only, takes a netio_ipp_address_t. */
+  NETIO_IPP_IOMEM_UNREGISTER_OFF = 0x7100000000000000ULL,
+
+  /* Offsets greater than 0x7FFFFFFF can't be used directly from Linux
+   * userspace code due to limitations in the pread/pwrite syscalls. */
+
+  /** Drain LIPP buffers. */
+  NETIO_IPP_DRAIN_OFF              = 0xFA00000000000000ULL,
+
+  /** Supply a netio_ipp_address_t to be used as shared memory for the
+   *  LEPP command queue. */
+  NETIO_EPP_SHM_OFF              = 0xFB00000000000000ULL,
+
+  /* 0xFC... is currently unused. */
+
+  /** Stop IPP/EPP tiles.  Write-only, takes a dummy argument.  */
+  NETIO_IPP_STOP_SHIM_OFF        = 0xFD00000000000000ULL,
+
+  /** Start IPP/EPP tiles.  Write-only, takes a dummy argument.  */
+  NETIO_IPP_START_SHIM_OFF       = 0xFE00000000000000ULL,
+
+  /** Supply packet arena.  Write-only, takes an array of
+    * netio_ipp_address_t values. */
+  NETIO_IPP_ADDRESS_OFF          = 0xFF00000000000000ULL,
+} netio_hv_offset_t;
+
+/** Extract the base offset from an offset */
+#define NETIO_BASE_OFFSET(off)    ((off) & 0xFF00000000000000ULL)
+/** Extract the local offset from an offset */
+#define NETIO_LOCAL_OFFSET(off)   ((off) & 0x00FFFFFFFFFFFFFFULL)
+
+
+/**
+ * Get/set offset.
+ */
+typedef union
+{
+  struct
+  {
+    uint64_t addr:48;        /**< Class-specific address */
+    unsigned int class:8;    /**< Class (e.g., NETIO_PARAM) */
+    unsigned int opcode:8;   /**< High 8 bits of NETIO_IPP_PARAM_OFF */
+  }
+  bits;                      /**< Bitfields */
+  uint64_t word;             /**< Aggregated value to use as the offset */
+}
+__netio_getset_offset_t;
+
+/**
+ * Fast I/O index offsets (must be contiguous).
+ */
+typedef enum
+{
+  NETIO_FASTIO_ALLOCATE         = 0, /**< Get empty packet buffer */
+  NETIO_FASTIO_FREE_BUFFER      = 1, /**< Give buffer back to IPP */
+  NETIO_FASTIO_RETURN_CREDITS   = 2, /**< Give credits to IPP */
+  NETIO_FASTIO_SEND_PKT_NOCK    = 3, /**< Send a packet, no checksum */
+  NETIO_FASTIO_SEND_PKT_CK      = 4, /**< Send a packet, with checksum */
+  NETIO_FASTIO_SEND_PKT_VEC     = 5, /**< Send a vector of packets */
+  NETIO_FASTIO_SENDV_PKT        = 6, /**< Sendv one packet */
+  NETIO_FASTIO_NUM_INDEX        = 7, /**< Total number of fast I/O indices */
+} netio_fastio_index_t;
+
+/** 3-word return type for Fast I/O call. */
+typedef struct
+{
+  int err;            /**< Error code. */
+  uint32_t val0;      /**< Value.  Meaning depends upon the specific call. */
+  uint32_t val1;      /**< Value.  Meaning depends upon the specific call. */
+} netio_fastio_rv3_t;
+
+/** 0-argument fast I/O call */
+int __netio_fastio0(uint32_t fastio_index);
+/** 1-argument fast I/O call */
+int __netio_fastio1(uint32_t fastio_index, uint32_t arg0);
+/** 3-argument fast I/O call, 2-word return value */
+netio_fastio_rv3_t __netio_fastio3_rv3(uint32_t fastio_index, uint32_t arg0,
+                                       uint32_t arg1, uint32_t arg2);
+/** 4-argument fast I/O call */
+int __netio_fastio4(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+                    uint32_t arg2, uint32_t arg3);
+/** 6-argument fast I/O call */
+int __netio_fastio6(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+                    uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5);
+/** 9-argument fast I/O call */
+int __netio_fastio9(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+                    uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5,
+                    uint32_t arg6, uint32_t arg7, uint32_t arg8);
+
+/** Allocate an empty packet.
+ * @param fastio_index Fast I/O index.
+ * @param size Size of the packet to allocate.
+ */
+#define __netio_fastio_allocate(fastio_index, size) \
+  __netio_fastio1((fastio_index) + NETIO_FASTIO_ALLOCATE, size)
+
+/** Free a buffer.
+ * @param fastio_index Fast I/O index.
+ * @param handle Handle for the packet to free.
+ */
+#define __netio_fastio_free_buffer(fastio_index, handle) \
+  __netio_fastio1((fastio_index) + NETIO_FASTIO_FREE_BUFFER, handle)
+
+/** Increment our receive credits.
+ * @param fastio_index Fast I/O index.
+ * @param credits Number of credits to add.
+ */
+#define __netio_fastio_return_credits(fastio_index, credits) \
+  __netio_fastio1((fastio_index) + NETIO_FASTIO_RETURN_CREDITS, credits)
+
+/** Send packet, no checksum.
+ * @param fastio_index Fast I/O index.
+ * @param ackflag Nonzero if we want an ack.
+ * @param size Size of the packet.
+ * @param va Virtual address of start of packet.
+ * @param handle Packet handle.
+ */
+#define __netio_fastio_send_pkt_nock(fastio_index, ackflag, size, va, handle) \
+  __netio_fastio4((fastio_index) + NETIO_FASTIO_SEND_PKT_NOCK, ackflag, \
+                  size, va, handle)
+
+/** Send packet, calculate checksum.
+ * @param fastio_index Fast I/O index.
+ * @param ackflag Nonzero if we want an ack.
+ * @param size Size of the packet.
+ * @param va Virtual address of start of packet.
+ * @param handle Packet handle.
+ * @param csum0 Shim checksum header.
+ * @param csum1 Checksum seed.
+ */
+#define __netio_fastio_send_pkt_ck(fastio_index, ackflag, size, va, handle, \
+                                   csum0, csum1) \
+  __netio_fastio6((fastio_index) + NETIO_FASTIO_SEND_PKT_CK, ackflag, \
+                  size, va, handle, csum0, csum1)
+
+
+/** Format for the "csum0" argument to the __netio_fastio_send routines
+ * and LEPP.  Note that this is currently exactly identical to the
+ * ShimProtocolOffloadHeader.
+ */
+typedef union
+{
+  struct
+  {
+    unsigned int start_byte:7;       /**< The first byte to be checksummed */
+    unsigned int count:14;           /**< Number of bytes to be checksummed. */
+    unsigned int destination_byte:7; /**< The byte to write the checksum to. */
+    unsigned int reserved:4;         /**< Reserved. */
+  } bits;                            /**< Decomposed method of access. */
+  unsigned int word;                 /**< To send out the IDN. */
+} __netio_checksum_header_t;
+
+
+/** Sendv packet with 1 or 2 segments.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits; number of segments minus
+ *        1 in next 2 bits; expected checksum in high 16 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; if zero, no checksum.
+ * @param va_F Virtual address of first segment.
+ * @param va_L Virtual address of last segment, if 2 segments.
+ * @param len_F_L Length of first segment in low 16 bits; length of last
+ *        segment, if 2 segments, in high 16 bits.
+ */
+#define __netio_fastio_sendv_pkt_1_2(fastio_index, flags, confno, csum0, \
+                                     va_F, va_L, len_F_L) \
+  __netio_fastio6((fastio_index) + NETIO_FASTIO_SENDV_PKT, flags, confno, \
+                  csum0, va_F, va_L, len_F_L)
+
+/** Send packet on PCIe interface.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; Hard wired 0, not needed for PCIe.
+ * @param va_F Virtual address of the packet buffer.
+ * @param va_L Virtual address of last segment, if 2 segments. Hard wired 0.
+ * @param len_F_L Length of the packet buffer in low 16 bits.
+ */
+#define __netio_fastio_send_pcie_pkt(fastio_index, flags, confno, csum0, \
+                                     va_F, va_L, len_F_L) \
+  __netio_fastio6((fastio_index) + PCIE_FASTIO_SENDV_PKT, flags, confno, \
+                  csum0, va_F, va_L, len_F_L)
+
+/** Sendv packet with 3 or 4 segments.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits; number of segments minus
+ *        1 in next 2 bits; expected checksum in high 16 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; if zero, no checksum.
+ * @param va_F Virtual address of first segment.
+ * @param va_L Virtual address of last segment (third segment if 3 segments,
+ *        fourth segment if 4 segments).
+ * @param len_F_L Length of first segment in low 16 bits; length of last
+ *        segment in high 16 bits.
+ * @param va_M0 Virtual address of "middle 0" segment; this segment is sent
+ *        second when there are three segments, and third if there are four.
+ * @param va_M1 Virtual address of "middle 1" segment; this segment is sent
+ *        second when there are four segments.
+ * @param len_M0_M1 Length of middle 0 segment in low 16 bits; length of middle
+ *        1 segment, if 4 segments, in high 16 bits.
+ */
+#define __netio_fastio_sendv_pkt_3_4(fastio_index, flags, confno, csum0, va_F, \
+                                     va_L, len_F_L, va_M0, va_M1, len_M0_M1) \
+  __netio_fastio9((fastio_index) + NETIO_FASTIO_SENDV_PKT, flags, confno, \
+                  csum0, va_F, va_L, len_F_L, va_M0, va_M1, len_M0_M1)
+
+/** Send vector of packets.
+ * @param fastio_index Fast I/O index.
+ * @param seqno Number of packets transmitted so far on this interface;
+ *        used to decide which packets should be acknowledged.
+ * @param nentries Number of entries in vector.
+ * @param va Virtual address of start of vector entry array.
+ * @return 3-word netio_fastio_rv3_t structure.  The structure's err member
+ *         is an error code, or zero if no error.  The val0 member is the
+ *         updated value of seqno; it has been incremented by 1 for each
+ *         packet sent.  That increment may be less than nentries if an
+ *         error occured, or if some of the entries in the vector contain
+ *         handles equal to NETIO_PKT_HANDLE_NONE.  The val1 member is the
+ *         updated value of nentries; it has been decremented by 1 for each
+ *         vector entry processed.  Again, that decrement may be less than
+ *         nentries (leaving the returned value positive) if an error
+ *         occurred.
+ */
+#define __netio_fastio_send_pkt_vec(fastio_index, seqno, nentries, va) \
+  __netio_fastio3_rv3((fastio_index) + NETIO_FASTIO_SEND_PKT_VEC, seqno, \
+                      nentries, va)
+
+
+/** An egress DMA command for LEPP. */
+typedef struct
+{
+  /** Is this a TSO transfer?
+   *
+   * NOTE: This field is always 0, to distinguish it from
+   * lepp_tso_cmd_t.  It must come first!
+   */
+  uint8_t tso               : 1;
+
+  /** Unused padding bits. */
+  uint8_t _unused           : 3;
+
+  /** Should this packet be sent directly from caches instead of DRAM,
+   * using hash-for-home to locate the packet data?
+   */
+  uint8_t hash_for_home     : 1;
+
+  /** Should we compute a checksum? */
+  uint8_t compute_checksum  : 1;
+
+  /** Is this the final buffer for this packet?
+   *
+   * A single packet can be split over several input buffers (a "gather"
+   * operation).  This flag indicates that this is the last buffer
+   * in a packet.
+   */
+  uint8_t end_of_packet     : 1;
+
+  /** Should LEPP advance 'comp_busy' when this DMA is fully finished? */
+  uint8_t send_completion   : 1;
+
+  /** High bits of Client Physical Address of the start of the buffer
+   *  to be egressed.
+   *
+   *  NOTE: Only 6 bits are actually needed here, as CPAs are
+   *  currently 38 bits.  So two bits could be scavenged from this.
+   */
+  uint8_t cpa_hi;
+
+  /** The number of bytes to be egressed. */
+  uint16_t length;
+
+  /** Low 32 bits of Client Physical Address of the start of the buffer
+   *  to be egressed.
+   */
+  uint32_t cpa_lo;
+
+  /** Checksum information (only used if 'compute_checksum'). */
+  __netio_checksum_header_t checksum_data;
+
+} lepp_cmd_t;
+
+
+/** A chunk of physical memory for a TSO egress. */
+typedef struct
+{
+  /** The low bits of the CPA. */
+  uint32_t cpa_lo;
+  /** The high bits of the CPA. */
+  uint16_t cpa_hi		: 15;
+  /** Should this packet be sent directly from caches instead of DRAM,
+   *  using hash-for-home to locate the packet data?
+   */
+  uint16_t hash_for_home	: 1;
+  /** The length in bytes. */
+  uint16_t length;
+} lepp_frag_t;
+
+
+/** An LEPP command that handles TSO. */
+typedef struct
+{
+  /** Is this a TSO transfer?
+   *
+   *  NOTE: This field is always 1, to distinguish it from
+   *  lepp_cmd_t.  It must come first!
+   */
+  uint8_t tso             : 1;
+
+  /** Unused padding bits. */
+  uint8_t _unused         : 7;
+
+  /** Size of the header[] array in bytes.  It must be in the range
+   *  [40, 127], which are the smallest header for a TCP packet over
+   *  Ethernet and the maximum possible prepend size supported by
+   *  hardware, respectively.  Note that the array storage must be
+   *  padded out to a multiple of four bytes so that the following
+   *  LEPP command is aligned properly.
+   */
+  uint8_t header_size;
+
+  /** Byte offset of the IP header in header[]. */
+  uint8_t ip_offset;
+
+  /** Byte offset of the TCP header in header[]. */
+  uint8_t tcp_offset;
+
+  /** The number of bytes to use for the payload of each packet,
+   *  except of course the last one, which may not have enough bytes.
+   *  This means that each Ethernet packet except the last will have a
+   *  size of header_size + payload_size.
+   */
+  uint16_t payload_size;
+
+  /** The length of the 'frags' array that follows this struct. */
+  uint16_t num_frags;
+
+  /** The actual frags. */
+  lepp_frag_t frags[0 /* Variable-sized; num_frags entries. */];
+
+  /*
+   * The packet header template logically follows frags[],
+   * but you can't declare that in C.
+   *
+   * uint32_t header[header_size_in_words_rounded_up];
+   */
+
+} lepp_tso_cmd_t;
+
+
+/** An LEPP completion ring entry. */
+typedef void* lepp_comp_t;
+
+
+/** Maximum number of frags for one TSO command.  This is adapted from
+ *  linux's "MAX_SKB_FRAGS", and presumably over-estimates by one, for
+ *  our page size of exactly 65536.  We add one for a "body" fragment.
+ */
+#define LEPP_MAX_FRAGS (65536 / HV_PAGE_SIZE_SMALL + 2 + 1)
+
+/** Total number of bytes needed for an lepp_tso_cmd_t. */
+#define LEPP_TSO_CMD_SIZE(num_frags, header_size) \
+  (sizeof(lepp_tso_cmd_t) + \
+   (num_frags) * sizeof(lepp_frag_t) + \
+   (((header_size) + 3) & -4))
+
+/** The size of the lepp "cmd" queue. */
+#define LEPP_CMD_QUEUE_BYTES \
+ (((CHIP_L2_CACHE_SIZE() - 2 * CHIP_L2_LINE_SIZE()) / \
+  (sizeof(lepp_cmd_t) + sizeof(lepp_comp_t))) * sizeof(lepp_cmd_t))
+
+/** The largest possible command that can go in lepp_queue_t::cmds[]. */
+#define LEPP_MAX_CMD_SIZE LEPP_TSO_CMD_SIZE(LEPP_MAX_FRAGS, 128)
+
+/** The largest possible value of lepp_queue_t::cmd_{head, tail} (inclusive).
+ */
+#define LEPP_CMD_LIMIT \
+  (LEPP_CMD_QUEUE_BYTES - LEPP_MAX_CMD_SIZE)
+
+/** The maximum number of completions in an LEPP queue. */
+#define LEPP_COMP_QUEUE_SIZE \
+  ((LEPP_CMD_LIMIT + sizeof(lepp_cmd_t) - 1) / sizeof(lepp_cmd_t))
+
+/** Increment an index modulo the queue size. */
+#define LEPP_QINC(var) \
+  (var = __insn_mnz(var - (LEPP_COMP_QUEUE_SIZE - 1), var + 1))
+
+/** A queue used to convey egress commands from the client to LEPP. */
+typedef struct
+{
+  /** Index of first completion not yet processed by user code.
+   *  If this is equal to comp_busy, there are no such completions.
+   *
+   *  NOTE: This is only read/written by the user.
+   */
+  unsigned int comp_head;
+
+  /** Index of first completion record not yet completed.
+   *  If this is equal to comp_tail, there are no such completions.
+   *  This index gets advanced (modulo LEPP_QUEUE_SIZE) whenever
+   *  a command with the 'completion' bit set is finished.
+   *
+   *  NOTE: This is only written by LEPP, only read by the user.
+   */
+  volatile unsigned int comp_busy;
+
+  /** Index of the first empty slot in the completion ring.
+   *  Entries from this up to but not including comp_head (in ring order)
+   *  can be filled in with completion data.
+   *
+   *  NOTE: This is only read/written by the user.
+   */
+  unsigned int comp_tail;
+
+  /** Byte index of first command enqueued for LEPP but not yet processed.
+   *
+   *  This is always divisible by sizeof(void*) and always <= LEPP_CMD_LIMIT.
+   *
+   *  NOTE: LEPP advances this counter as soon as it no longer needs
+   *  the cmds[] storage for this entry, but the transfer is not actually
+   *  complete (i.e. the buffer pointed to by the command is no longer
+   *  needed) until comp_busy advances.
+   *
+   *  If this is equal to cmd_tail, the ring is empty.
+   *
+   *  NOTE: This is only written by LEPP, only read by the user.
+   */
+  volatile unsigned int cmd_head;
+
+  /** Byte index of first empty slot in the command ring.  This field can
+   *  be incremented up to but not equal to cmd_head (because that would
+   *  mean the ring is empty).
+   *
+   *  This is always divisible by sizeof(void*) and always <= LEPP_CMD_LIMIT.
+   *
+   *  NOTE: This is read/written by the user, only read by LEPP.
+   */
+  volatile unsigned int cmd_tail;
+
+  /** A ring of variable-sized egress DMA commands.
+   *
+   *  NOTE: Only written by the user, only read by LEPP.
+   */
+  char cmds[LEPP_CMD_QUEUE_BYTES]
+    __attribute__((aligned(CHIP_L2_LINE_SIZE())));
+
+  /** A ring of user completion data.
+   *  NOTE: Only read/written by the user.
+   */
+  lepp_comp_t comps[LEPP_COMP_QUEUE_SIZE]
+    __attribute__((aligned(CHIP_L2_LINE_SIZE())));
+} lepp_queue_t;
+
+
+/** An internal helper function for determining the number of entries
+ *  available in a ring buffer, given that there is one sentinel.
+ */
+static inline unsigned int
+_lepp_num_free_slots(unsigned int head, unsigned int tail)
+{
+  /*
+   * One entry is reserved for use as a sentinel, to distinguish
+   * "empty" from "full".  So we compute
+   * (head - tail - 1) % LEPP_QUEUE_SIZE, but without using a slow % operation.
+   */
+  return (head - tail - 1) + ((head <= tail) ? LEPP_COMP_QUEUE_SIZE : 0);
+}
+
+
+/** Returns how many new comp entries can be enqueued. */
+static inline unsigned int
+lepp_num_free_comp_slots(const lepp_queue_t* q)
+{
+  return _lepp_num_free_slots(q->comp_head, q->comp_tail);
+}
+
+static inline int
+lepp_qsub(int v1, int v2)
+{
+  int delta = v1 - v2;
+  return delta + ((delta >> 31) & LEPP_COMP_QUEUE_SIZE);
+}
+
+
+/** FIXME: Check this from linux, via a new "pwrite()" call. */
+#define LIPP_VERSION 1
+
+
+/** We use exactly two bytes of alignment padding. */
+#define LIPP_PACKET_PADDING 2
+
+/** The minimum size of a "small" buffer (including the padding). */
+#define LIPP_SMALL_PACKET_SIZE 128
+
+/*
+ * NOTE: The following two values should total to less than around
+ * 13582, to keep the total size used for "lipp_state_t" below 64K.
+ */
+
+/** The maximum number of "small" buffers.
+ *  This is enough for 53 network cpus with 128 credits.  Note that
+ *  if these are exhausted, we will fall back to using large buffers.
+ */
+#define LIPP_SMALL_BUFFERS 6785
+
+/** The maximum number of "large" buffers.
+ *  This is enough for 53 network cpus with 128 credits.
+ */
+#define LIPP_LARGE_BUFFERS 6785
+
+#endif /* __DRV_XGBE_INTF_H__ */
diff --git a/arch/tile/include/hv/netio_errors.h b/arch/tile/include/hv/netio_errors.h
new file mode 100644
index 000000000000..e1591bff61b5
--- /dev/null
+++ b/arch/tile/include/hv/netio_errors.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * Error codes returned from NetIO routines.
+ */
+
+#ifndef __NETIO_ERRORS_H__
+#define __NETIO_ERRORS_H__
+
+/**
+ * @addtogroup error
+ *
+ * @brief The error codes returned by NetIO functions.
+ *
+ * NetIO functions return 0 (defined as ::NETIO_NO_ERROR) on success, and
+ * a negative value if an error occurs.
+ *
+ * In cases where a NetIO function failed due to a error reported by
+ * system libraries, the error code will be the negation of the
+ * system errno at the time of failure.  The @ref netio_strerror()
+ * function will deliver error strings for both NetIO and system error
+ * codes.
+ *
+ * @{
+ */
+
+/** The set of all NetIO errors. */
+typedef enum
+{
+  /** Operation successfully completed. */
+  NETIO_NO_ERROR        = 0,
+
+  /** A packet was successfully retrieved from an input queue. */
+  NETIO_PKT             = 0,
+
+  /** Largest NetIO error number. */
+  NETIO_ERR_MAX         = -701,
+
+  /** The tile is not registered with the IPP. */
+  NETIO_NOT_REGISTERED  = -701,
+
+  /** No packet was available to retrieve from the input queue. */
+  NETIO_NOPKT           = -702,
+
+  /** The requested function is not implemented. */
+  NETIO_NOT_IMPLEMENTED = -703,
+
+  /** On a registration operation, the target queue already has the maximum
+   *  number of tiles registered for it, and no more may be added.  On a
+   *  packet send operation, the output queue is full and nothing more can
+   *  be queued until some of the queued packets are actually transmitted. */
+  NETIO_QUEUE_FULL      = -704,
+
+  /** The calling process or thread is not bound to exactly one CPU. */
+  NETIO_BAD_AFFINITY    = -705,
+
+  /** Cannot allocate memory on requested controllers. */
+  NETIO_CANNOT_HOME     = -706,
+
+  /** On a registration operation, the IPP specified is not configured
+   *  to support the options requested; for instance, the application
+   *  wants a specific type of tagged headers which the configured IPP
+   *  doesn't support.  Or, the supplied configuration information is
+   *  not self-consistent, or is out of range; for instance, specifying
+   *  both NETIO_RECV and NETIO_NO_RECV, or asking for more than
+   *  NETIO_MAX_SEND_BUFFERS to be preallocated.  On a VLAN or bucket
+   *  configure operation, the number of items, or the base item, was
+   *  out of range.
+   */
+  NETIO_BAD_CONFIG      = -707,
+
+  /** Too many tiles have registered to transmit packets. */
+  NETIO_TOOMANY_XMIT    = -708,
+
+  /** Packet transmission was attempted on a queue which was registered
+      with transmit disabled. */
+  NETIO_UNREG_XMIT      = -709,
+
+  /** This tile is already registered with the IPP. */
+  NETIO_ALREADY_REGISTERED = -710,
+
+  /** The Ethernet link is down. The application should try again later. */
+  NETIO_LINK_DOWN       = -711,
+
+  /** An invalid memory buffer has been specified.  This may be an unmapped
+   * virtual address, or one which does not meet alignment requirements.
+   * For netio_input_register(), this error may be returned when multiple
+   * processes specify different memory regions to be used for NetIO
+   * buffers.  That can happen if these processes specify explicit memory
+   * regions with the ::NETIO_FIXED_BUFFER_VA flag, or if tmc_cmem_init()
+   * has not been called by a common ancestor of the processes.
+   */
+  NETIO_FAULT           = -712,
+
+  /** Cannot combine user-managed shared memory and cache coherence. */
+  NETIO_BAD_CACHE_CONFIG = -713,
+
+  /** Smallest NetIO error number. */
+  NETIO_ERR_MIN         = -713,
+
+#ifndef __DOXYGEN__
+  /** Used internally to mean that no response is needed; never returned to
+   *  an application. */
+  NETIO_NO_RESPONSE     = 1
+#endif
+} netio_error_t;
+
+/** @} */
+
+#endif /* __NETIO_ERRORS_H__ */
diff --git a/arch/tile/include/hv/netio_intf.h b/arch/tile/include/hv/netio_intf.h
new file mode 100644
index 000000000000..8d20972aba2c
--- /dev/null
+++ b/arch/tile/include/hv/netio_intf.h
@@ -0,0 +1,2975 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * NetIO interface structures and macros.
+ */
+
+#ifndef __NETIO_INTF_H__
+#define __NETIO_INTF_H__
+
+#include <hv/netio_errors.h>
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+#if !defined(__HV__) && !defined(__BOGUX__) && !defined(__KERNEL__)
+#include <assert.h>
+#define netio_assert assert  /**< Enable assertions from macros */
+#else
+#define netio_assert(...) ((void)(0))  /**< Disable assertions from macros */
+#endif
+
+/*
+ * If none of these symbols are defined, we're building libnetio in an
+ * environment where we have pthreads, so we'll enable locking.
+ */
+#if !defined(__HV__) && !defined(__BOGUX__) && !defined(__KERNEL__) && \
+    !defined(__NEWLIB__)
+#define _NETIO_PTHREAD       /**< Include a mutex in netio_queue_t below */
+
+/*
+ * If NETIO_UNLOCKED is defined, we don't do use per-cpu locks on
+ * per-packet NetIO operations.  We still do pthread locking on things
+ * like netio_input_register, though.  This is used for building
+ * libnetio_unlocked.
+ */
+#ifndef NETIO_UNLOCKED
+
+/* Avoid PLT overhead by using our own inlined per-cpu lock. */
+#include <sched.h>
+typedef int _netio_percpu_mutex_t;
+
+static __inline int
+_netio_percpu_mutex_init(_netio_percpu_mutex_t* lock)
+{
+  *lock = 0;
+  return 0;
+}
+
+static __inline int
+_netio_percpu_mutex_lock(_netio_percpu_mutex_t* lock)
+{
+  while (__builtin_expect(__insn_tns(lock), 0))
+    sched_yield();
+  return 0;
+}
+
+static __inline int
+_netio_percpu_mutex_unlock(_netio_percpu_mutex_t* lock)
+{
+  *lock = 0;
+  return 0;
+}
+
+#else /* NETIO_UNLOCKED */
+
+/* Don't do any locking for per-packet NetIO operations. */
+typedef int _netio_percpu_mutex_t;
+#define _netio_percpu_mutex_init(L)
+#define _netio_percpu_mutex_lock(L)
+#define _netio_percpu_mutex_unlock(L)
+
+#endif /* NETIO_UNLOCKED */
+#endif /* !__HV__, !__BOGUX, !__KERNEL__, !__NEWLIB__ */
+
+/** How many tiles can register for a given queue.
+ *  @ingroup setup */
+#define NETIO_MAX_TILES_PER_QUEUE  64
+
+
+/** Largest permissible queue identifier.
+ *  @ingroup setup  */
+#define NETIO_MAX_QUEUE_ID        255
+
+
+#ifndef __DOXYGEN__
+
+/* Metadata packet checksum/ethertype flags. */
+
+/** The L4 checksum has not been calculated. */
+#define _NETIO_PKT_NO_L4_CSUM_SHIFT           0
+#define _NETIO_PKT_NO_L4_CSUM_RMASK           1
+#define _NETIO_PKT_NO_L4_CSUM_MASK \
+         (_NETIO_PKT_NO_L4_CSUM_RMASK << _NETIO_PKT_NO_L4_CSUM_SHIFT)
+
+/** The L3 checksum has not been calculated. */
+#define _NETIO_PKT_NO_L3_CSUM_SHIFT           1
+#define _NETIO_PKT_NO_L3_CSUM_RMASK           1
+#define _NETIO_PKT_NO_L3_CSUM_MASK \
+         (_NETIO_PKT_NO_L3_CSUM_RMASK << _NETIO_PKT_NO_L3_CSUM_SHIFT)
+
+/** The L3 checksum is incorrect (or perhaps has not been calculated). */
+#define _NETIO_PKT_BAD_L3_CSUM_SHIFT          2
+#define _NETIO_PKT_BAD_L3_CSUM_RMASK          1
+#define _NETIO_PKT_BAD_L3_CSUM_MASK \
+         (_NETIO_PKT_BAD_L3_CSUM_RMASK << _NETIO_PKT_BAD_L3_CSUM_SHIFT)
+
+/** The Ethernet packet type is unrecognized. */
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_SHIFT    3
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_RMASK    1
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_MASK \
+         (_NETIO_PKT_TYPE_UNRECOGNIZED_RMASK << \
+          _NETIO_PKT_TYPE_UNRECOGNIZED_SHIFT)
+
+/* Metadata packet type flags. */
+
+/** Where the packet type bits are; this field is the index into
+ *  _netio_pkt_info. */
+#define _NETIO_PKT_TYPE_SHIFT        4
+#define _NETIO_PKT_TYPE_RMASK        0x3F
+
+/** How many VLAN tags the packet has, and, if we have two, which one we
+ *  actually grouped on.  A VLAN within a proprietary (Marvell or Broadcom)
+ *  tag is counted here. */
+#define _NETIO_PKT_VLAN_SHIFT        4
+#define _NETIO_PKT_VLAN_RMASK        0x3
+#define _NETIO_PKT_VLAN_MASK \
+         (_NETIO_PKT_VLAN_RMASK << _NETIO_PKT_VLAN_SHIFT)
+#define _NETIO_PKT_VLAN_NONE         0   /* No VLAN tag. */
+#define _NETIO_PKT_VLAN_ONE          1   /* One VLAN tag. */
+#define _NETIO_PKT_VLAN_TWO_OUTER    2   /* Two VLAN tags, outer one used. */
+#define _NETIO_PKT_VLAN_TWO_INNER    3   /* Two VLAN tags, inner one used. */
+
+/** Which proprietary tags the packet has. */
+#define _NETIO_PKT_TAG_SHIFT         6
+#define _NETIO_PKT_TAG_RMASK         0x3
+#define _NETIO_PKT_TAG_MASK \
+          (_NETIO_PKT_TAG_RMASK << _NETIO_PKT_TAG_SHIFT)
+#define _NETIO_PKT_TAG_NONE          0   /* No proprietary tags. */
+#define _NETIO_PKT_TAG_MRVL          1   /* Marvell HyperG.Stack tags. */
+#define _NETIO_PKT_TAG_MRVL_EXT      2   /* HyperG.Stack extended tags. */
+#define _NETIO_PKT_TAG_BRCM          3   /* Broadcom HiGig tags. */
+
+/** Whether a packet has an LLC + SNAP header. */
+#define _NETIO_PKT_SNAP_SHIFT        8
+#define _NETIO_PKT_SNAP_RMASK        0x1
+#define _NETIO_PKT_SNAP_MASK \
+          (_NETIO_PKT_SNAP_RMASK << _NETIO_PKT_SNAP_SHIFT)
+
+/* NOTE: Bits 9 and 10 are unused. */
+
+/** Length of any custom data before the L2 header, in words. */
+#define _NETIO_PKT_CUSTOM_LEN_SHIFT  11
+#define _NETIO_PKT_CUSTOM_LEN_RMASK  0x1F
+#define _NETIO_PKT_CUSTOM_LEN_MASK \
+          (_NETIO_PKT_CUSTOM_LEN_RMASK << _NETIO_PKT_CUSTOM_LEN_SHIFT)
+
+/** The L4 checksum is incorrect (or perhaps has not been calculated). */
+#define _NETIO_PKT_BAD_L4_CSUM_SHIFT 16
+#define _NETIO_PKT_BAD_L4_CSUM_RMASK 0x1
+#define _NETIO_PKT_BAD_L4_CSUM_MASK \
+          (_NETIO_PKT_BAD_L4_CSUM_RMASK << _NETIO_PKT_BAD_L4_CSUM_SHIFT)
+
+/** Length of the L2 header, in words. */
+#define _NETIO_PKT_L2_LEN_SHIFT  17
+#define _NETIO_PKT_L2_LEN_RMASK  0x1F
+#define _NETIO_PKT_L2_LEN_MASK \
+          (_NETIO_PKT_L2_LEN_RMASK << _NETIO_PKT_L2_LEN_SHIFT)
+
+
+/* Flags in minimal packet metadata. */
+
+/** We need an eDMA checksum on this packet. */
+#define _NETIO_PKT_NEED_EDMA_CSUM_SHIFT            0
+#define _NETIO_PKT_NEED_EDMA_CSUM_RMASK            1
+#define _NETIO_PKT_NEED_EDMA_CSUM_MASK \
+         (_NETIO_PKT_NEED_EDMA_CSUM_RMASK << _NETIO_PKT_NEED_EDMA_CSUM_SHIFT)
+
+/* Data within the packet information table. */
+
+/* Note that, for efficiency, code which uses these fields assumes that none
+ * of the shift values below are zero.  See uses below for an explanation. */
+
+/** Offset within the L2 header of the innermost ethertype (in halfwords). */
+#define _NETIO_PKT_INFO_ETYPE_SHIFT       6
+#define _NETIO_PKT_INFO_ETYPE_RMASK    0x1F
+
+/** Offset within the L2 header of the VLAN tag (in halfwords). */
+#define _NETIO_PKT_INFO_VLAN_SHIFT       11
+#define _NETIO_PKT_INFO_VLAN_RMASK     0x1F
+
+#endif
+
+
+/** The size of a memory buffer representing a small packet.
+ *  @ingroup egress */
+#define SMALL_PACKET_SIZE 256
+
+/** The size of a memory buffer representing a large packet.
+ *  @ingroup egress */
+#define LARGE_PACKET_SIZE 2048
+
+/** The size of a memory buffer representing a jumbo packet.
+ *  @ingroup egress */
+#define JUMBO_PACKET_SIZE (12 * 1024)
+
+
+/* Common ethertypes.
+ * @ingroup ingress */
+/** @{ */
+/** The ethertype of IPv4. */
+#define ETHERTYPE_IPv4 (0x0800)
+/** The ethertype of ARP. */
+#define ETHERTYPE_ARP (0x0806)
+/** The ethertype of VLANs. */
+#define ETHERTYPE_VLAN (0x8100)
+/** The ethertype of a Q-in-Q header. */
+#define ETHERTYPE_Q_IN_Q (0x9100)
+/** The ethertype of IPv6. */
+#define ETHERTYPE_IPv6 (0x86DD)
+/** The ethertype of MPLS. */
+#define ETHERTYPE_MPLS (0x8847)
+/** @} */
+
+
+/** The possible return values of NETIO_PKT_STATUS.
+ * @ingroup ingress
+ */
+typedef enum
+{
+  /** No problems were detected with this packet. */
+  NETIO_PKT_STATUS_OK,
+  /** The packet is undersized; this is expected behavior if the packet's
+    * ethertype is unrecognized, but otherwise the packet is likely corrupt. */
+  NETIO_PKT_STATUS_UNDERSIZE,
+  /** The packet is oversized and some trailing bytes have been discarded.
+      This is expected behavior for short packets, since it's impossible to
+      precisely determine the amount of padding which may have been added to
+      them to make them meet the minimum Ethernet packet size. */
+  NETIO_PKT_STATUS_OVERSIZE,
+  /** The packet was judged to be corrupt by hardware (for instance, it had
+      a bad CRC, or part of it was discarded due to lack of buffer space in
+      the I/O shim) and should be discarded. */
+  NETIO_PKT_STATUS_BAD
+} netio_pkt_status_t;
+
+
+/** Log2 of how many buckets we have. */
+#define NETIO_LOG2_NUM_BUCKETS (10)
+
+/** How many buckets we have.
+ * @ingroup ingress */
+#define NETIO_NUM_BUCKETS (1 << NETIO_LOG2_NUM_BUCKETS)
+
+
+/**
+ * @brief A group-to-bucket identifier.
+ *
+ * @ingroup setup
+ *
+ * This tells us what to do with a given group.
+ */
+typedef union {
+  /** The header broken down into bits. */
+  struct {
+    /** Whether we should balance on L4, if available */
+    unsigned int __balance_on_l4:1;
+    /** Whether we should balance on L3, if available */
+    unsigned int __balance_on_l3:1;
+    /** Whether we should balance on L2, if available */
+    unsigned int __balance_on_l2:1;
+    /** Reserved for future use */
+    unsigned int __reserved:1;
+    /** The base bucket to use to send traffic */
+    unsigned int __bucket_base:NETIO_LOG2_NUM_BUCKETS;
+    /** The mask to apply to the balancing value. This must be one less
+     * than a power of two, e.g. 0x3 or 0xFF.
+     */
+    unsigned int __bucket_mask:NETIO_LOG2_NUM_BUCKETS;
+    /** Pad to 32 bits */
+    unsigned int __padding:(32 - 4 - 2 * NETIO_LOG2_NUM_BUCKETS);
+  } bits;
+  /** To send out the IDN. */
+  unsigned int word;
+}
+netio_group_t;
+
+
+/**
+ * @brief A VLAN-to-bucket identifier.
+ *
+ * @ingroup setup
+ *
+ * This tells us what to do with a given VLAN.
+ */
+typedef netio_group_t netio_vlan_t;
+
+
+/**
+ * A bucket-to-queue mapping.
+ * @ingroup setup
+ */
+typedef unsigned char netio_bucket_t;
+
+
+/**
+ * A packet size can always fit in a netio_size_t.
+ * @ingroup setup
+ */
+typedef unsigned int netio_size_t;
+
+
+/**
+ * @brief Ethernet standard (ingress) packet metadata.
+ *
+ * @ingroup ingress
+ *
+ * This is additional data associated with each packet.
+ * This structure is opaque and accessed through the @ref ingress.
+ *
+ * Also, the buffer population operation currently assumes that standard
+ * metadata is at least as large as minimal metadata, and will need to be
+ * modified if that is no longer the case.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+  /** This structure is opaque. */
+  unsigned char opaque[24];
+#else
+  /** The overall ordinal of the packet */
+  unsigned int __packet_ordinal;
+  /** The ordinal of the packet within the group */
+  unsigned int __group_ordinal;
+  /** The best flow hash IPP could compute. */
+  unsigned int __flow_hash;
+  /** Flags pertaining to checksum calculation, packet type, etc. */
+  unsigned int __flags;
+  /** The first word of "user data". */
+  unsigned int __user_data_0;
+  /** The second word of "user data". */
+  unsigned int __user_data_1;
+#endif
+}
+netio_pkt_metadata_t;
+
+
+/** To ensure that the L3 header is aligned mod 4, the L2 header should be
+ * aligned mod 4 plus 2, since every supported L2 header is 4n + 2 bytes
+ * long.  The standard way to do this is to simply add 2 bytes of padding
+ * before the L2 header.
+ */
+#define NETIO_PACKET_PADDING 2
+
+
+
+/**
+ * @brief Ethernet minimal (egress) packet metadata.
+ *
+ * @ingroup egress
+ *
+ * This structure represents information about packets which have
+ * been processed by @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer().  This structure is opaque
+ * and accessed through the @ref egress.
+ *
+ * @internal This structure is actually copied into the memory used by
+ * standard metadata, which is assumed to be large enough.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+  /** This structure is opaque. */
+  unsigned char opaque[14];
+#else
+  /** The offset of the L2 header from the start of the packet data. */
+  unsigned short l2_offset;
+  /** The offset of the L3 header from the start of the packet data. */
+  unsigned short l3_offset;
+  /** Where to write the checksum. */
+  unsigned char csum_location;
+  /** Where to start checksumming from. */
+  unsigned char csum_start;
+  /** Flags pertaining to checksum calculation etc. */
+  unsigned short flags;
+  /** The L2 length of the packet. */
+  unsigned short l2_length;
+  /** The checksum with which to seed the checksum generator. */
+  unsigned short csum_seed;
+  /** How much to checksum. */
+  unsigned short csum_length;
+#endif
+}
+netio_pkt_minimal_metadata_t;
+
+
+#ifndef __DOXYGEN__
+
+/**
+ * @brief An I/O notification header.
+ *
+ * This is the first word of data received from an I/O shim in a notification
+ * packet. It contains framing and status information.
+ */
+typedef union
+{
+  unsigned int word; /**< The whole word. */
+  /** The various fields. */
+  struct
+  {
+    unsigned int __channel:7;    /**< Resource channel. */
+    unsigned int __type:4;       /**< Type. */
+    unsigned int __ack:1;        /**< Whether an acknowledgement is needed. */
+    unsigned int __reserved:1;   /**< Reserved. */
+    unsigned int __protocol:1;   /**< A protocol-specific word is added. */
+    unsigned int __status:2;     /**< Status of the transfer. */
+    unsigned int __framing:2;    /**< Framing of the transfer. */
+    unsigned int __transfer_size:14; /**< Transfer size in bytes (total). */
+  } bits;
+}
+__netio_pkt_notif_t;
+
+
+/**
+ * Returns the base address of the packet.
+ */
+#define _NETIO_PKT_HANDLE_BASE(p) \
+  ((unsigned char*)((p).word & 0xFFFFFFC0))
+
+/**
+ * Returns the base address of the packet.
+ */
+#define _NETIO_PKT_BASE(p) \
+  _NETIO_PKT_HANDLE_BASE(p->__packet)
+
+/**
+ * @brief An I/O notification packet (second word)
+ *
+ * This is the second word of data received from an I/O shim in a notification
+ * packet.  This is the virtual address of the packet buffer, plus some flag
+ * bits.  (The virtual address of the packet is always 256-byte aligned so we
+ * have room for 8 bits' worth of flags in the low 8 bits.)
+ *
+ * @internal
+ * NOTE: The low two bits must contain "__queue", so the "packet size"
+ * (SIZE_SMALL, SIZE_LARGE, or SIZE_JUMBO) can be determined quickly.
+ *
+ * If __addr or __offset are moved, _NETIO_PKT_BASE
+ * (defined right below this) must be changed.
+ */
+typedef union
+{
+  unsigned int word; /**< The whole word. */
+  /** The various fields. */
+  struct
+  {
+    /** Which queue the packet will be returned to once it is sent back to
+        the IPP.  This is one of the SIZE_xxx values. */
+    unsigned int __queue:2;
+
+    /** The IPP handle of the sending IPP. */
+    unsigned int __ipp_handle:2;
+
+    /** Reserved for future use. */
+    unsigned int __reserved:1;
+
+    /** If 1, this packet has minimal (egress) metadata; otherwise, it
+        has standard (ingress) metadata. */
+    unsigned int __minimal:1;
+
+    /** Offset of the metadata within the packet.  This value is multiplied
+     *  by 64 and added to the base packet address to get the metadata
+     *  address.  Note that this field is aligned within the word such that
+     *  you can easily extract the metadata address with a 26-bit mask. */
+    unsigned int __offset:2;
+
+    /** The top 24 bits of the packet's virtual address. */
+    unsigned int __addr:24;
+  } bits;
+}
+__netio_pkt_handle_t;
+
+#endif /* !__DOXYGEN__ */
+
+
+/**
+ * @brief A handle for an I/O packet's storage.
+ * @ingroup ingress
+ *
+ * netio_pkt_handle_t encodes the concept of a ::netio_pkt_t with its
+ * packet metadata removed.  It is a much smaller type that exists to
+ * facilitate applications where the full ::netio_pkt_t type is too
+ * large, such as those that cache enormous numbers of packets or wish
+ * to transmit packet descriptors over the UDN.
+ *
+ * Because there is no metadata, most ::netio_pkt_t operations cannot be
+ * performed on a netio_pkt_handle_t.  It supports only
+ * netio_free_handle() (to free the buffer) and
+ * NETIO_PKT_CUSTOM_DATA_H() (to access a pointer to its contents).
+ * The application must acquire any additional metadata it wants from the
+ * original ::netio_pkt_t and record it separately.
+ *
+ * A netio_pkt_handle_t can be extracted from a ::netio_pkt_t by calling
+ * NETIO_PKT_HANDLE().  An invalid handle (analogous to NULL) can be
+ * created by assigning the value ::NETIO_PKT_HANDLE_NONE. A handle can
+ * be tested for validity with NETIO_PKT_HANDLE_IS_VALID().
+ */
+typedef struct
+{
+  unsigned int word; /**< Opaque bits. */
+} netio_pkt_handle_t;
+
+/**
+ * @brief A packet descriptor.
+ *
+ * @ingroup ingress
+ * @ingroup egress
+ *
+ * This data structure represents a packet.  The structure is manipulated
+ * through the @ref ingress and the @ref egress.
+ *
+ * While the contents of a netio_pkt_t are opaque, the structure itself is
+ * portable.  This means that it may be shared between all tiles which have
+ * done a netio_input_register() call for the interface on which the pkt_t
+ * was initially received (via netio_get_packet()) or retrieved (via
+ * netio_get_buffer()).  The contents of a netio_pkt_t can be transmitted to
+ * another tile via shared memory, or via a UDN message, or by other means.
+ * The destination tile may then use the pkt_t as if it had originally been
+ * received locally; it may read or write the packet's data, read its
+ * metadata, free the packet, send the packet, transfer the netio_pkt_t to
+ * yet another tile, and so forth.
+ *
+ * Once a netio_pkt_t has been transferred to a second tile, the first tile
+ * should not reference the original copy; in particular, if more than one
+ * tile frees or sends the same netio_pkt_t, the IPP's packet free lists will
+ * become corrupted.  Note also that each tile which reads or modifies
+ * packet data must obey the memory coherency rules outlined in @ref input.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+  /** This structure is opaque. */
+  unsigned char opaque[32];
+#else
+  /** For an ingress packet (one with standard metadata), this is the
+   *  notification header we got from the I/O shim.  For an egress packet
+   *  (one with minimal metadata), this word is zero if the packet has not
+   *  been populated, and nonzero if it has. */
+  __netio_pkt_notif_t __notif_header;
+
+  /** Virtual address of the packet buffer, plus state flags. */
+  __netio_pkt_handle_t __packet;
+
+  /** Metadata associated with the packet. */
+  netio_pkt_metadata_t __metadata;
+#endif
+}
+netio_pkt_t;
+
+
+#ifndef __DOXYGEN__
+
+#define __NETIO_PKT_NOTIF_HEADER(pkt) ((pkt)->__notif_header)
+#define __NETIO_PKT_IPP_HANDLE(pkt) ((pkt)->__packet.bits.__ipp_handle)
+#define __NETIO_PKT_QUEUE(pkt) ((pkt)->__packet.bits.__queue)
+#define __NETIO_PKT_NOTIF_HEADER_M(mda, pkt) ((pkt)->__notif_header)
+#define __NETIO_PKT_IPP_HANDLE_M(mda, pkt) ((pkt)->__packet.bits.__ipp_handle)
+#define __NETIO_PKT_MINIMAL(pkt) ((pkt)->__packet.bits.__minimal)
+#define __NETIO_PKT_QUEUE_M(mda, pkt) ((pkt)->__packet.bits.__queue)
+#define __NETIO_PKT_FLAGS_M(mda, pkt) ((mda)->__flags)
+
+/* Packet information table, used by the attribute access functions below. */
+extern const uint16_t _netio_pkt_info[];
+
+#endif /* __DOXYGEN__ */
+
+
+#ifndef __DOXYGEN__
+/* These macros are deprecated and will disappear in a future MDE release. */
+#define NETIO_PKT_GOOD_CHECKSUM(pkt) \
+  NETIO_PKT_L4_CSUM_CORRECT(pkt)
+#define NETIO_PKT_GOOD_CHECKSUM_M(mda, pkt) \
+  NETIO_PKT_L4_CSUM_CORRECT_M(mda, pkt)
+#endif /* __DOXYGEN__ */
+
+
+/* Packet attribute access functions. */
+
+/** Return a pointer to the metadata for a packet.
+ * @ingroup ingress
+ *
+ * Calling this function once and passing the result to other retrieval
+ * functions with a "_M" suffix usually improves performance.  This
+ * function must be called on an 'ingress' packet (i.e. one retrieved
+ * by @ref netio_get_packet(), on which @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer have not been called). Use of this
+ * function on an 'egress' packet will cause an assertion failure.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's standard metadata.
+ */
+static __inline netio_pkt_metadata_t*
+NETIO_PKT_METADATA(netio_pkt_t* pkt)
+{
+  netio_assert(!pkt->__packet.bits.__minimal);
+  return &pkt->__metadata;
+}
+
+
+/** Return a pointer to the minimal metadata for a packet.
+ * @ingroup egress
+ *
+ * Calling this function once and passing the result to other retrieval
+ * functions with a "_MM" suffix usually improves performance.  This
+ * function must be called on an 'egress' packet (i.e. one on which
+ * @ref netio_populate_buffer() or @ref netio_populate_prepend_buffer()
+ * have been called, or one retrieved by @ref netio_get_buffer()). Use of
+ * this function on an 'ingress' packet will cause an assertion failure.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's standard metadata.
+ */
+static __inline netio_pkt_minimal_metadata_t*
+NETIO_PKT_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+  netio_assert(pkt->__packet.bits.__minimal);
+  return (netio_pkt_minimal_metadata_t*) &pkt->__metadata;
+}
+
+
+/** Determine whether a packet has 'minimal' metadata.
+ * @ingroup pktfuncs
+ *
+ * This function will return nonzero if the packet is an 'egress'
+ * packet (i.e. one on which @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer() have been called, or one
+ * retrieved by @ref netio_get_buffer()), and zero if the packet
+ * is an 'ingress' packet (i.e. one retrieved by @ref netio_get_packet(),
+ * which has not been converted into an 'egress' packet).
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet has minimal metadata.
+ */
+static __inline unsigned int
+NETIO_PKT_IS_MINIMAL(netio_pkt_t* pkt)
+{
+  return pkt->__packet.bits.__minimal;
+}
+
+
+/** Return a handle for a packet's storage.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A handle for the packet's storage.
+ */
+static __inline netio_pkt_handle_t
+NETIO_PKT_HANDLE(netio_pkt_t* pkt)
+{
+  netio_pkt_handle_t h;
+  h.word = pkt->__packet.word;
+  return h;
+}
+
+
+/** A special reserved value indicating the absence of a packet handle.
+ *
+ * @ingroup pktfuncs
+ */
+#define NETIO_PKT_HANDLE_NONE ((netio_pkt_handle_t) { 0 })
+
+
+/** Test whether a packet handle is valid.
+ *
+ * Applications may wish to use the reserved value NETIO_PKT_HANDLE_NONE
+ * to indicate no packet at all.  This function tests to see if a packet
+ * handle is a real handle, not this special reserved value.
+ *
+ * @ingroup pktfuncs
+ *
+ * @param[in] handle Handle on which to operate.
+ * @return One if the packet handle is valid, else zero.
+ */
+static __inline unsigned int
+NETIO_PKT_HANDLE_IS_VALID(netio_pkt_handle_t handle)
+{
+  return handle.word != 0;
+}
+
+
+
+/** Return a pointer to the start of the packet's custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] handle Handle on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA_H(netio_pkt_handle_t handle)
+{
+  return _NETIO_PKT_HANDLE_BASE(handle) + NETIO_PACKET_PADDING;
+}
+
+
+/** Return the length of the packet's custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's custom header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_HEADER_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  /*
+   * Note that we effectively need to extract a quantity from the flags word
+   * which is measured in words, and then turn it into bytes by shifting
+   * it left by 2.  We do this all at once by just shifting right two less
+   * bits, and shifting the mask up two bits.
+   */
+  return ((mda->__flags >> (_NETIO_PKT_CUSTOM_LEN_SHIFT - 2)) &
+          (_NETIO_PKT_CUSTOM_LEN_RMASK << 2));
+}
+
+
+/** Return the length of the packet, starting with the custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (__NETIO_PKT_NOTIF_HEADER(pkt).bits.__transfer_size -
+          NETIO_PACKET_PADDING);
+}
+
+
+/** Return a pointer to the start of the packet's custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return NETIO_PKT_CUSTOM_DATA_H(NETIO_PKT_HANDLE(pkt));
+}
+
+
+/** Return the length of the packet's L2 (Ethernet plus VLAN or SNAP) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  /*
+   * Note that we effectively need to extract a quantity from the flags word
+   * which is measured in words, and then turn it into bytes by shifting
+   * it left by 2.  We do this all at once by just shifting right two less
+   * bits, and shifting the mask up two bits.  We then add two bytes.
+   */
+  return ((mda->__flags >> (_NETIO_PKT_L2_LEN_SHIFT - 2)) &
+          (_NETIO_PKT_L2_LEN_RMASK << 2)) + 2;
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (NETIO_PKT_CUSTOM_LENGTH_M(mda, pkt) -
+          NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda,pkt));
+}
+
+
+/** Return a pointer to the start of the packet's L2 (Ethernet) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (NETIO_PKT_CUSTOM_DATA_M(mda, pkt) +
+          NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt));
+}
+
+
+/** Retrieve the length of the packet, starting with the L3 (generally,
+ *  the IP) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (NETIO_PKT_L2_LENGTH_M(mda, pkt) -
+          NETIO_PKT_L2_HEADER_LENGTH_M(mda,pkt));
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup ingress
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (NETIO_PKT_L2_DATA_M(mda, pkt) +
+          NETIO_PKT_L2_HEADER_LENGTH_M(mda, pkt));
+}
+
+
+/** Return the ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given an ordinal number when it is delivered by the IPP.
+ * In the medium term, the ordinal is unique and monotonically increasing,
+ * being incremented by 1 for each packet; the ordinal of the first packet
+ * delivered after the IPP starts is zero.  (Since the ordinal is of finite
+ * size, given enough input packets, it will eventually wrap around to zero;
+ * in the long term, therefore, ordinals are not unique.)  The ordinals
+ * handed out by different IPPs are not disjoint, so two packets from
+ * different IPPs may have identical ordinals.  Packets dropped by the
+ * IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP packet ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_ORDINAL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return mda->__packet_ordinal;
+}
+
+
+/** Return the per-group ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given a per-group ordinal number when it is
+ * delivered by the IPP. By default, the group is the packet's VLAN,
+ * although IPP can be recompiled to use different values.  In
+ * the medium term, the ordinal is unique and monotonically
+ * increasing, being incremented by 1 for each packet; the ordinal of
+ * the first packet distributed to a particular group is zero.
+ * (Since the ordinal is of finite size, given enough input packets,
+ * it will eventually wrap around to zero; in the long term,
+ * therefore, ordinals are not unique.)  The ordinals handed out by
+ * different IPPs are not disjoint, so two packets from different IPPs
+ * may have identical ordinals; similarly, packets distributed to
+ * different groups may have identical ordinals.  Packets dropped by
+ * the IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP, per-group ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_GROUP_ORDINAL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return mda->__group_ordinal;
+}
+
+
+/** Return the VLAN ID assigned to the packet.
+ * @ingroup ingress
+ *
+ * This value is usually contained within the packet header.
+ *
+ * This value will be zero if the packet does not have a VLAN tag, or if
+ * this value was not extracted from the packet.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's VLAN ID.
+ */
+static __inline unsigned short
+NETIO_PKT_VLAN_ID_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  int vl = (mda->__flags >> _NETIO_PKT_VLAN_SHIFT) & _NETIO_PKT_VLAN_RMASK;
+  unsigned short* pkt_p;
+  int index;
+  unsigned short val;
+
+  if (vl == _NETIO_PKT_VLAN_NONE)
+    return 0;
+
+  pkt_p = (unsigned short*) NETIO_PKT_L2_DATA_M(mda, pkt);
+  index = (mda->__flags >> _NETIO_PKT_TYPE_SHIFT) & _NETIO_PKT_TYPE_RMASK;
+
+  val = pkt_p[(_netio_pkt_info[index] >> _NETIO_PKT_INFO_VLAN_SHIFT) &
+              _NETIO_PKT_INFO_VLAN_RMASK];
+
+#ifdef __TILECC__
+  return (__insn_bytex(val) >> 16) & 0xFFF;
+#else
+  return (__builtin_bswap32(val) >> 16) & 0xFFF;
+#endif
+}
+
+
+/** Return the ethertype of the packet.
+ * @ingroup ingress
+ *
+ * This value is usually contained within the packet header.
+ *
+ * This value is reliable if @ref NETIO_PKT_ETHERTYPE_RECOGNIZED_M()
+ * returns true, and otherwise, may not be well defined.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's ethertype.
+ */
+static __inline unsigned short
+NETIO_PKT_ETHERTYPE_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  unsigned short* pkt_p = (unsigned short*) NETIO_PKT_L2_DATA_M(mda, pkt);
+  int index = (mda->__flags >> _NETIO_PKT_TYPE_SHIFT) & _NETIO_PKT_TYPE_RMASK;
+
+  unsigned short val =
+    pkt_p[(_netio_pkt_info[index] >> _NETIO_PKT_INFO_ETYPE_SHIFT) &
+          _NETIO_PKT_INFO_ETYPE_RMASK];
+
+  return __builtin_bswap32(val) >> 16;
+}
+
+
+/** Return the flow hash computed on the packet.
+ * @ingroup ingress
+ *
+ * For TCP and UDP packets, this hash is calculated by hashing together
+ * the "5-tuple" values, specifically the source IP address, destination
+ * IP address, protocol type, source port and destination port.
+ * The hash value is intended to be helpful for millions of distinct
+ * flows.
+ *
+ * For IPv4 or IPv6 packets which are neither TCP nor UDP, the flow hash is
+ * derived by hashing together the source and destination IP addresses.
+ *
+ * For MPLS-encapsulated packets, the flow hash is derived by hashing
+ * the first MPLS label.
+ *
+ * For all other packets the flow hash is computed from the source
+ * and destination Ethernet addresses.
+ *
+ * The hash is symmetric, meaning it produces the same value if the
+ * source and destination are swapped. The only exceptions are
+ * tunneling protocols 0x04 (IP in IP Encapsulation), 0x29 (Simple
+ * Internet Protocol), 0x2F (General Routing Encapsulation) and 0x32
+ * (Encap Security Payload), which use only the destination address
+ * since the source address is not meaningful.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's 32-bit flow hash.
+ */
+static __inline unsigned int
+NETIO_PKT_FLOW_HASH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return mda->__flow_hash;
+}
+
+
+/** Return the first word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the first
+ * word of user data contains the least significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_low()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's first word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_0_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return mda->__user_data_0;
+}
+
+
+/** Return the second word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the second
+ * word of user data contains the most significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_high()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's second word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_1_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return mda->__user_data_1;
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L4 checksum was calculated.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CALCULATED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return !(mda->__flags & _NETIO_PKT_NO_L4_CSUM_MASK);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated and found to
+ *  be correct.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CORRECT_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return !(mda->__flags &
+           (_NETIO_PKT_BAD_L4_CSUM_MASK | _NETIO_PKT_NO_L4_CSUM_MASK));
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L3 (IP) checksum was calculated.
+*/
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CALCULATED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return !(mda->__flags & _NETIO_PKT_NO_L3_CSUM_MASK);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated and found to be
+ *  correct.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CORRECT_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return !(mda->__flags &
+           (_NETIO_PKT_BAD_L3_CSUM_MASK | _NETIO_PKT_NO_L3_CSUM_MASK));
+}
+
+
+/** Determine whether the ethertype was recognized and L3 packet data was
+ *  processed.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the ethertype was recognized and L3 packet data was
+ *   processed.
+ */
+static __inline unsigned int
+NETIO_PKT_ETHERTYPE_RECOGNIZED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return !(mda->__flags & _NETIO_PKT_TYPE_UNRECOGNIZED_MASK);
+}
+
+
+/** Retrieve the status of a packet and any errors that may have occurred
+ * during ingress processing (length mismatches, CRC errors, etc.).
+ * @ingroup ingress
+ *
+ * Note that packets for which @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns zero are always reported as underlength, as there is no a priori
+ * means to determine their length.  Normally, applications should use
+ * @ref NETIO_PKT_BAD_M() instead of explicitly checking status with this
+ * function.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's status.
+ */
+static __inline netio_pkt_status_t
+NETIO_PKT_STATUS_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (netio_pkt_status_t) __NETIO_PKT_NOTIF_HEADER(pkt).bits.__status;
+}
+
+
+/** Report whether a packet is bad (i.e., was shorter than expected based on
+ *  its headers, or had a bad CRC).
+ * @ingroup ingress
+ *
+ * Note that this function does not verify L3 or L4 checksums.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet is bad and should be discarded.
+ */
+static __inline unsigned int
+NETIO_PKT_BAD_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return ((NETIO_PKT_STATUS_M(mda, pkt) & 1) &&
+          (NETIO_PKT_ETHERTYPE_RECOGNIZED_M(mda, pkt) ||
+           NETIO_PKT_STATUS_M(mda, pkt) == NETIO_PKT_STATUS_BAD));
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+  return mmd->l2_length;
+}
+
+
+/** Return the length of the L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd,
+                              netio_pkt_t* pkt)
+{
+  return mmd->l3_offset - mmd->l2_offset;
+}
+
+
+/** Return the length of the packet, starting with the L3 (IP) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+  return (NETIO_PKT_L2_LENGTH_MM(mmd, pkt) -
+          NETIO_PKT_L2_HEADER_LENGTH_MM(mmd, pkt));
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup egress
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+  return _NETIO_PKT_BASE(pkt) + mmd->l3_offset;
+}
+
+
+/** Return a pointer to the packet's L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+  return _NETIO_PKT_BASE(pkt) + mmd->l2_offset;
+}
+
+
+/** Retrieve the status of a packet and any errors that may have occurred
+ * during ingress processing (length mismatches, CRC errors, etc.).
+ * @ingroup ingress
+ *
+ * Note that packets for which @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns zero are always reported as underlength, as there is no a priori
+ * means to determine their length.  Normally, applications should use
+ * @ref NETIO_PKT_BAD() instead of explicitly checking status with this
+ * function.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's status.
+ */
+static __inline netio_pkt_status_t
+NETIO_PKT_STATUS(netio_pkt_t* pkt)
+{
+  netio_assert(!pkt->__packet.bits.__minimal);
+
+  return (netio_pkt_status_t) __NETIO_PKT_NOTIF_HEADER(pkt).bits.__status;
+}
+
+
+/** Report whether a packet is bad (i.e., was shorter than expected based on
+ *  its headers, or had a bad CRC).
+ * @ingroup ingress
+ *
+ * Note that this function does not verify L3 or L4 checksums.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet is bad and should be discarded.
+ */
+static __inline unsigned int
+NETIO_PKT_BAD(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_BAD_M(mda, pkt);
+}
+
+
+/** Return the length of the packet's custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's custom header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_HEADER_LENGTH(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt);
+}
+
+
+/** Return the length of the packet, starting with the custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return  The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_LENGTH(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_CUSTOM_LENGTH_M(mda, pkt);
+}
+
+
+/** Return a pointer to the packet's custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_CUSTOM_DATA_M(mda, pkt);
+}
+
+
+/** Return the length of the packet's L2 (Ethernet plus VLAN or SNAP) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_L2_HEADER_LENGTH_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_L2_HEADER_LENGTH_M(mda, pkt);
+  }
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return  The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_L2_LENGTH_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_L2_LENGTH_M(mda, pkt);
+  }
+}
+
+
+/** Return a pointer to the packet's L2 (Ethernet) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_L2_DATA_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_L2_DATA_M(mda, pkt);
+  }
+}
+
+
+/** Retrieve the length of the packet, starting with the L3 (generally, the IP)
+ * header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_L3_LENGTH_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_L3_LENGTH_M(mda, pkt);
+  }
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup pktfuncs
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_L3_DATA_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_L3_DATA_M(mda, pkt);
+  }
+}
+
+
+/** Return the ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given an ordinal number when it is delivered by the IPP.
+ * In the medium term, the ordinal is unique and monotonically increasing,
+ * being incremented by 1 for each packet; the ordinal of the first packet
+ * delivered after the IPP starts is zero.  (Since the ordinal is of finite
+ * size, given enough input packets, it will eventually wrap around to zero;
+ * in the long term, therefore, ordinals are not unique.)  The ordinals
+ * handed out by different IPPs are not disjoint, so two packets from
+ * different IPPs may have identical ordinals.  Packets dropped by the
+ * IPP or by the I/O shim are not assigned ordinals.
+ *
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP packet ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_ORDINAL(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_ORDINAL_M(mda, pkt);
+}
+
+
+/** Return the per-group ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given a per-group ordinal number when it is
+ * delivered by the IPP. By default, the group is the packet's VLAN,
+ * although IPP can be recompiled to use different values.  In
+ * the medium term, the ordinal is unique and monotonically
+ * increasing, being incremented by 1 for each packet; the ordinal of
+ * the first packet distributed to a particular group is zero.
+ * (Since the ordinal is of finite size, given enough input packets,
+ * it will eventually wrap around to zero; in the long term,
+ * therefore, ordinals are not unique.)  The ordinals handed out by
+ * different IPPs are not disjoint, so two packets from different IPPs
+ * may have identical ordinals; similarly, packets distributed to
+ * different groups may have identical ordinals.  Packets dropped by
+ * the IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP, per-group ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_GROUP_ORDINAL(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_GROUP_ORDINAL_M(mda, pkt);
+}
+
+
+/** Return the VLAN ID assigned to the packet.
+ * @ingroup ingress
+ *
+ * This is usually also contained within the packet header.  If the packet
+ * does not have a VLAN tag, the VLAN ID returned by this function is zero.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's VLAN ID.
+ */
+static __inline unsigned short
+NETIO_PKT_VLAN_ID(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_VLAN_ID_M(mda, pkt);
+}
+
+
+/** Return the ethertype of the packet.
+ * @ingroup ingress
+ *
+ * This value is reliable if @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns true, and otherwise, may not be well defined.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's ethertype.
+ */
+static __inline unsigned short
+NETIO_PKT_ETHERTYPE(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_ETHERTYPE_M(mda, pkt);
+}
+
+
+/** Return the flow hash computed on the packet.
+ * @ingroup ingress
+ *
+ * For TCP and UDP packets, this hash is calculated by hashing together
+ * the "5-tuple" values, specifically the source IP address, destination
+ * IP address, protocol type, source port and destination port.
+ * The hash value is intended to be helpful for millions of distinct
+ * flows.
+ *
+ * For IPv4 or IPv6 packets which are neither TCP nor UDP, the flow hash is
+ * derived by hashing together the source and destination IP addresses.
+ *
+ * For MPLS-encapsulated packets, the flow hash is derived by hashing
+ * the first MPLS label.
+ *
+ * For all other packets the flow hash is computed from the source
+ * and destination Ethernet addresses.
+ *
+ * The hash is symmetric, meaning it produces the same value if the
+ * source and destination are swapped. The only exceptions are
+ * tunneling protocols 0x04 (IP in IP Encapsulation), 0x29 (Simple
+ * Internet Protocol), 0x2F (General Routing Encapsulation) and 0x32
+ * (Encap Security Payload), which use only the destination address
+ * since the source address is not meaningful.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's 32-bit flow hash.
+ */
+static __inline unsigned int
+NETIO_PKT_FLOW_HASH(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_FLOW_HASH_M(mda, pkt);
+}
+
+
+/** Return the first word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the first
+ * word of user data contains the least significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_low()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's first word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_0(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_USER_DATA_0_M(mda, pkt);
+}
+
+
+/** Return the second word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the second
+ * word of user data contains the most significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_high()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's second word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_1(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_USER_DATA_1_M(mda, pkt);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L4 checksum was calculated.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CALCULATED(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_L4_CSUM_CALCULATED_M(mda, pkt);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated and found to
+ *  be correct.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CORRECT(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_L4_CSUM_CORRECT_M(mda, pkt);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L3 (IP) checksum was calculated.
+*/
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CALCULATED(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_L3_CSUM_CALCULATED_M(mda, pkt);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated and found to be
+ *  correct.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CORRECT(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_L3_CSUM_CORRECT_M(mda, pkt);
+}
+
+
+/** Determine whether the Ethertype was recognized and L3 packet data was
+ *  processed.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the Ethertype was recognized and L3 packet data was
+ *   processed.
+ */
+static __inline unsigned int
+NETIO_PKT_ETHERTYPE_RECOGNIZED(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_ETHERTYPE_RECOGNIZED_M(mda, pkt);
+}
+
+
+/** Set an egress packet's L2 length, using a metadata pointer to speed the
+ * computation.
+ * @ingroup egress
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] len Packet L2 length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt,
+                           int len)
+{
+  mmd->l2_length = len;
+}
+
+
+/** Set an egress packet's L2 length.
+ * @ingroup egress
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] len Packet L2 length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_LENGTH(netio_pkt_t* pkt, int len)
+{
+  netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+  NETIO_PKT_SET_L2_LENGTH_MM(mmd, pkt, len);
+}
+
+
+/** Set an egress packet's L2 header length, using a metadata pointer to
+ *  speed the computation.
+ * @ingroup egress
+ *
+ * It is not normally necessary to call this routine; only the L2 length,
+ * not the header length, is needed to transmit a packet.  It may be useful if
+ * the egress packet will later be processed by code which expects to use
+ * functions like @ref NETIO_PKT_L3_DATA() to get a pointer to the L3 payload.
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] len Packet L2 header length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_HEADER_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd,
+                                  netio_pkt_t* pkt, int len)
+{
+  mmd->l3_offset = mmd->l2_offset + len;
+}
+
+
+/** Set an egress packet's L2 header length.
+ * @ingroup egress
+ *
+ * It is not normally necessary to call this routine; only the L2 length,
+ * not the header length, is needed to transmit a packet.  It may be useful if
+ * the egress packet will later be processed by code which expects to use
+ * functions like @ref NETIO_PKT_L3_DATA() to get a pointer to the L3 payload.
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] len Packet L2 header length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_HEADER_LENGTH(netio_pkt_t* pkt, int len)
+{
+  netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+  NETIO_PKT_SET_L2_HEADER_LENGTH_MM(mmd, pkt, len);
+}
+
+
+/** Set up an egress packet for hardware checksum computation, using a
+ *  metadata pointer to speed the operation.
+ * @ingroup egress
+ *
+ *  NetIO provides the ability to automatically calculate a standard
+ *  16-bit Internet checksum on transmitted packets.  The application
+ *  may specify the point in the packet where the checksum starts, the
+ *  number of bytes to be checksummed, and the two bytes in the packet
+ *  which will be replaced with the completed checksum.  (If the range
+ *  of bytes to be checksummed includes the bytes to be replaced, the
+ *  initial values of those bytes will be included in the checksum.)
+ *
+ *  For some protocols, the packet checksum covers data which is not present
+ *  in the packet, or is at least not contiguous to the main data payload.
+ *  For instance, the TCP checksum includes a "pseudo-header" which includes
+ *  the source and destination IP addresses of the packet.  To accommodate
+ *  this, the checksum engine may be "seeded" with an initial value, which
+ *  the application would need to compute based on the specific protocol's
+ *  requirements.  Note that the seed is given in host byte order (little-
+ *  endian), not network byte order (big-endian); code written to compute a
+ *  pseudo-header checksum in network byte order will need to byte-swap it
+ *  before use as the seed.
+ *
+ *  Note that the checksum is computed as part of the transmission process,
+ *  so it will not be present in the packet upon completion of this routine.
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] start Offset within L2 packet of the first byte to include in
+ *   the checksum.
+ * @param[in] length Number of bytes to include in the checksum.
+ *   the checksum.
+ * @param[in] location Offset within L2 packet of the first of the two bytes
+ *   to be replaced with the calculated checksum.
+ * @param[in] seed Initial value of the running checksum before any of the
+ *   packet data is added.
+ */
+static __inline void
+NETIO_PKT_DO_EGRESS_CSUM_MM(netio_pkt_minimal_metadata_t* mmd,
+                            netio_pkt_t* pkt, int start, int length,
+                            int location, uint16_t seed)
+{
+  mmd->csum_start = start;
+  mmd->csum_length = length;
+  mmd->csum_location = location;
+  mmd->csum_seed = seed;
+  mmd->flags |= _NETIO_PKT_NEED_EDMA_CSUM_MASK;
+}
+
+
+/** Set up an egress packet for hardware checksum computation.
+ * @ingroup egress
+ *
+ *  NetIO provides the ability to automatically calculate a standard
+ *  16-bit Internet checksum on transmitted packets.  The application
+ *  may specify the point in the packet where the checksum starts, the
+ *  number of bytes to be checksummed, and the two bytes in the packet
+ *  which will be replaced with the completed checksum.  (If the range
+ *  of bytes to be checksummed includes the bytes to be replaced, the
+ *  initial values of those bytes will be included in the checksum.)
+ *
+ *  For some protocols, the packet checksum covers data which is not present
+ *  in the packet, or is at least not contiguous to the main data payload.
+ *  For instance, the TCP checksum includes a "pseudo-header" which includes
+ *  the source and destination IP addresses of the packet.  To accommodate
+ *  this, the checksum engine may be "seeded" with an initial value, which
+ *  the application would need to compute based on the specific protocol's
+ *  requirements.  Note that the seed is given in host byte order (little-
+ *  endian), not network byte order (big-endian); code written to compute a
+ *  pseudo-header checksum in network byte order will need to byte-swap it
+ *  before use as the seed.
+ *
+ *  Note that the checksum is computed as part of the transmission process,
+ *  so it will not be present in the packet upon completion of this routine.
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] start Offset within L2 packet of the first byte to include in
+ *   the checksum.
+ * @param[in] length Number of bytes to include in the checksum.
+ *   the checksum.
+ * @param[in] location Offset within L2 packet of the first of the two bytes
+ *   to be replaced with the calculated checksum.
+ * @param[in] seed Initial value of the running checksum before any of the
+ *   packet data is added.
+ */
+static __inline void
+NETIO_PKT_DO_EGRESS_CSUM(netio_pkt_t* pkt, int start, int length,
+                         int location, uint16_t seed)
+{
+  netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+  NETIO_PKT_DO_EGRESS_CSUM_MM(mmd, pkt, start, length, location, seed);
+}
+
+
+/** Return the number of bytes which could be prepended to a packet, using a
+ *  metadata pointer to speed the operation.
+ *  See @ref netio_populate_prepend_buffer() to get a full description of
+ *  prepending.
+ *
+ * @param[in,out] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (pkt->__packet.bits.__offset << 6) +
+         NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt);
+}
+
+
+/** Return the number of bytes which could be prepended to a packet, using a
+ *  metadata pointer to speed the operation.
+ *  See @ref netio_populate_prepend_buffer() to get a full description of
+ *  prepending.
+ * @ingroup egress
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+  return (pkt->__packet.bits.__offset << 6) + mmd->l2_offset;
+}
+
+
+/** Return the number of bytes which could be prepended to a packet.
+ *  See @ref netio_populate_prepend_buffer() to get a full description of
+ *  prepending.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_PREPEND_AVAIL_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_PREPEND_AVAIL_M(mda, pkt);
+  }
+}
+
+
+/** Flush a packet's minimal metadata from the cache, using a metadata pointer
+ *  to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+                                    netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's minimal metadata from the cache, using a metadata
+ *  pointer to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+                                  netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's minimal metadata from the cache,
+ *  using a metadata pointer to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+                                        netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's metadata from the cache, using a metadata pointer
+ *  to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's metadata from the cache, using a metadata
+ *  pointer to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's metadata from the cache,
+ *  using a metadata pointer to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_METADATA(netio_pkt_t* pkt)
+{
+}
+
+/** Number of NUMA nodes we can distribute buffers to.
+ * @ingroup setup */
+#define NETIO_NUM_NODE_WEIGHTS  16
+
+/**
+ * @brief An object for specifying the characteristics of NetIO communication
+ * endpoint.
+ *
+ * @ingroup setup
+ *
+ * The @ref netio_input_register() function uses this structure to define
+ * how an application tile will communicate with an IPP.
+ *
+ *
+ * Future updates to NetIO may add new members to this structure,
+ * which can affect the success of the registration operation.  Thus,
+ * if dynamically initializing the structure, applications are urged to
+ * zero it out first, for example:
+ *
+ * @code
+ * netio_input_config_t config;
+ * memset(&config, 0, sizeof (config));
+ * config.flags = NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE;
+ * config.num_receive_packets = NETIO_MAX_RECEIVE_PKTS;
+ * config.queue_id = 0;
+ *     .
+ *     .
+ *     .
+ * @endcode
+ *
+ * since that guarantees that any unused structure members, including
+ * members which did not exist when the application was first developed,
+ * will not have unexpected values.
+ *
+ * If statically initializing the structure, we strongly recommend use of
+ * C99-style named initializers, for example:
+ *
+ * @code
+ * netio_input_config_t config = {
+ *    .flags = NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE,
+ *    .num_receive_packets = NETIO_MAX_RECEIVE_PKTS,
+ *    .queue_id = 0,
+ * },
+ * @endcode
+ *
+ * instead of the old-style structure initialization:
+ *
+ * @code
+ * // Bad example! Currently equivalent to the above, but don't do this.
+ * netio_input_config_t config = {
+ *    NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE, NETIO_MAX_RECEIVE_PKTS, 0
+ * },
+ * @endcode
+ *
+ * since the C99 style requires no changes to the code if elements of the
+ * config structure are rearranged.  (It also makes the initialization much
+ * easier to understand.)
+ *
+ * Except for items which address a particular tile's transmit or receive
+ * characteristics, such as the ::NETIO_RECV flag, applications are advised
+ * to specify the same set of configuration data on all registrations.
+ * This prevents differing results if multiple tiles happen to do their
+ * registration operations in a different order on different invocations of
+ * the application.  This is particularly important for things like link
+ * management flags, and buffer size and homing specifications.
+ *
+ * Unless the ::NETIO_FIXED_BUFFER_VA flag is specified in flags, the NetIO
+ * buffer pool is automatically created and mapped into the application's
+ * virtual address space at an address chosen by the operating system,
+ * using the common memory (cmem) facility in the Tilera Multicore
+ * Components library.  The cmem facility allows multiple processes to gain
+ * access to shared memory which is mapped into each process at an
+ * identical virtual address.  In order for this to work, the processes
+ * must have a common ancestor, which must create the common memory using
+ * tmc_cmem_init().
+ *
+ * In programs using the iLib process creation API, or in programs which use
+ * only one process (which include programs using the pthreads library),
+ * tmc_cmem_init() is called automatically.  All other applications
+ * must call it explicitly, before any child processes which might call
+ * netio_input_register() are created.
+ */
+typedef struct
+{
+  /** Registration characteristics.
+
+      This value determines several characteristics of the registration;
+      flags for different types of behavior are ORed together to make the
+      final flag value.  Generally applications should specify exactly
+      one flag from each of the following categories:
+
+      - Whether the application will be receiving packets on this queue
+        (::NETIO_RECV or ::NETIO_NO_RECV).
+
+      - Whether the application will be transmitting packets on this queue,
+        and if so, whether it will request egress checksum calculation
+        (::NETIO_XMIT, ::NETIO_XMIT_CSUM, or ::NETIO_NO_XMIT).  It is
+        legal to call netio_get_buffer() without one of the XMIT flags,
+        as long as ::NETIO_RECV is specified; in this case, the retrieved
+        buffers must be passed to another tile for transmission.
+
+      - Whether the application expects any vendor-specific tags in
+        its packets' L2 headers (::NETIO_TAG_NONE, ::NETIO_TAG_BRCM,
+        or ::NETIO_TAG_MRVL).  This must match the configuration of the
+        target IPP.
+
+      To accommodate applications written to previous versions of the NetIO
+      interface, none of the flags above are currently required; if omitted,
+      NetIO behaves more or less as if ::NETIO_RECV | ::NETIO_XMIT_CSUM |
+      ::NETIO_TAG_NONE were used.  However, explicit specification of
+      the relevant flags allows NetIO to do a better job of resource
+      allocation, allows earlier detection of certain configuration errors,
+      and may enable advanced features or higher performance in the future,
+      so their use is strongly recommended.
+
+      Note that specifying ::NETIO_NO_RECV along with ::NETIO_NO_XMIT
+      is a special case, intended primarily for use by programs which
+      retrieve network statistics or do link management operations.
+      When these flags are both specified, the resulting queue may not
+      be used with NetIO routines other than netio_get(), netio_set(),
+      and netio_input_unregister().  See @ref link for more information
+      on link management.
+
+      Other flags are optional; their use is described below.
+  */
+  int flags;
+
+  /** Interface name.  This is a string which identifies the specific
+      Ethernet controller hardware to be used.  The format of the string
+      is a device type and a device index, separated by a slash; so,
+      the first 10 Gigabit Ethernet controller is named "xgbe/0", while
+      the second 10/100/1000 Megabit Ethernet controller is named "gbe/1".
+   */
+  const char* interface;
+
+  /** Receive packet queue size.  This specifies the maximum number
+      of ingress packets that can be received on this queue without
+      being retrieved by @ref netio_get_packet().  If the IPP's distribution
+      algorithm calls for a packet to be sent to this queue, and this
+      number of packets are already pending there, the new packet
+      will either be discarded, or sent to another tile registered
+      for the same queue_id (see @ref drops).  This value must
+      be at least ::NETIO_MIN_RECEIVE_PKTS, can always be at least
+      ::NETIO_MAX_RECEIVE_PKTS, and may be larger than that on certain
+      interfaces.
+   */
+  int num_receive_packets;
+
+  /** The queue ID being requested.  Legal values for this range from 0
+      to ::NETIO_MAX_QUEUE_ID, inclusive.  ::NETIO_MAX_QUEUE_ID is always
+      greater than or equal to the number of tiles; this allows one queue
+      for each tile, plus at least one additional queue.  Some applications
+      may wish to use the additional queue as a destination for unwanted
+      packets, since packets delivered to queues for which no tiles have
+      registered are discarded.
+   */
+  unsigned int queue_id;
+
+  /** Maximum number of small send buffers to be held in the local empty
+      buffer cache.  This specifies the size of the area which holds
+      empty small egress buffers requested from the IPP but not yet
+      retrieved via @ref netio_get_buffer().  This value must be greater
+      than zero if the application will ever use @ref netio_get_buffer()
+      to allocate empty small egress buffers; it may be no larger than
+      ::NETIO_MAX_SEND_BUFFERS.  See @ref epp for more details on empty
+      buffer caching.
+   */
+  int num_send_buffers_small_total;
+
+  /** Number of small send buffers to be preallocated at registration.
+      If this value is nonzero, the specified number of empty small egress
+      buffers will be requested from the IPP during the netio_input_register
+      operation; this may speed the execution of @ref netio_get_buffer().
+      This may be no larger than @ref num_send_buffers_small_total.  See @ref
+      epp for more details on empty buffer caching.
+   */
+  int num_send_buffers_small_prealloc;
+
+  /** Maximum number of large send buffers to be held in the local empty
+      buffer cache.  This specifies the size of the area which holds empty
+      large egress buffers requested from the IPP but not yet retrieved via
+      @ref netio_get_buffer().  This value must be greater than zero if the
+      application will ever use @ref netio_get_buffer() to allocate empty
+      large egress buffers; it may be no larger than ::NETIO_MAX_SEND_BUFFERS.
+      See @ref epp for more details on empty buffer caching.
+   */
+  int num_send_buffers_large_total;
+
+  /** Number of large send buffers to be preallocated at registration.
+      If this value is nonzero, the specified number of empty large egress
+      buffers will be requested from the IPP during the netio_input_register
+      operation; this may speed the execution of @ref netio_get_buffer().
+      This may be no larger than @ref num_send_buffers_large_total.  See @ref
+      epp for more details on empty buffer caching.
+   */
+  int num_send_buffers_large_prealloc;
+
+  /** Maximum number of jumbo send buffers to be held in the local empty
+      buffer cache.  This specifies the size of the area which holds empty
+      jumbo egress buffers requested from the IPP but not yet retrieved via
+      @ref netio_get_buffer().  This value must be greater than zero if the
+      application will ever use @ref netio_get_buffer() to allocate empty
+      jumbo egress buffers; it may be no larger than ::NETIO_MAX_SEND_BUFFERS.
+      See @ref epp for more details on empty buffer caching.
+   */
+  int num_send_buffers_jumbo_total;
+
+  /** Number of jumbo send buffers to be preallocated at registration.
+      If this value is nonzero, the specified number of empty jumbo egress
+      buffers will be requested from the IPP during the netio_input_register
+      operation; this may speed the execution of @ref netio_get_buffer().
+      This may be no larger than @ref num_send_buffers_jumbo_total.  See @ref
+      epp for more details on empty buffer caching.
+   */
+  int num_send_buffers_jumbo_prealloc;
+
+  /** Total packet buffer size.  This determines the total size, in bytes,
+      of the NetIO buffer pool.  Note that the maximum number of available
+      buffers of each size is determined during hypervisor configuration
+      (see the <em>System Programmer's Guide</em> for details); this just
+      influences how much host memory is allocated for those buffers.
+
+      The buffer pool is allocated from common memory, which will be
+      automatically initialized if needed.  If your buffer pool is larger
+      than 240 MB, you might need to explicitly call @c tmc_cmem_init(),
+      as described in the Application Libraries Reference Manual (UG227).
+
+      Packet buffers are currently allocated in chunks of 16 MB; this
+      value will be rounded up to the next larger multiple of 16 MB.
+      If this value is zero, a default of 32 MB will be used; this was
+      the value used by previous versions of NetIO.  Note that taking this
+      default also affects the placement of buffers on Linux NUMA nodes.
+      See @ref buffer_node_weights for an explanation of buffer placement.
+
+      In order to successfully allocate packet buffers, Linux must have
+      available huge pages on the relevant Linux NUMA nodes.  See the
+      <em>System Programmer's Guide</em> for information on configuring
+      huge page support in Linux.
+   */
+  uint64_t total_buffer_size;
+
+  /** Buffer placement weighting factors.
+
+      This array specifies the relative amount of buffering to place
+      on each of the available Linux NUMA nodes.  This array is
+      indexed by the NUMA node, and the values in the array are
+      proportional to the amount of buffer space to allocate on that
+      node.
+
+      If memory striping is enabled in the Hypervisor, then there is
+      only one logical NUMA node (node 0). In that case, NetIO will by
+      default ignore the suggested buffer node weights, and buffers
+      will be striped across the physical memory controllers. See
+      UG209 System Programmer's Guide for a description of the
+      hypervisor option that controls memory striping.
+
+      If memory striping is disabled, then there are up to four NUMA
+      nodes, corresponding to the four DDRAM controllers in the TILE
+      processor architecture.  See UG100 Tile Processor Architecture
+      Overview for a diagram showing the location of each of the DDRAM
+      controllers relative to the tile array.
+
+      For instance, if memory striping is disabled, the following
+      configuration strucure:
+
+      @code
+      netio_input_config_t config = {
+            .
+            .
+            .
+        .total_buffer_size = 4 * 16 * 1024 * 1024;
+        .buffer_node_weights = { 1, 0, 1, 0 },
+      },
+      @endcode
+
+      would result in 32 MB of buffers being placed on controller 0, and
+      32 MB on controller 2.  (Since buffers are allocated in units of
+      16 MB, some sets of weights will not be able to be matched exactly.)
+
+      For the weights to be effective, @ref total_buffer_size must be
+      nonzero.  If @ref total_buffer_size is zero, causing the default
+      32 MB of buffer space to be used, then any specified weights will
+      be ignored, and buffers will positioned as they were in previous
+      versions of NetIO:
+
+      - For xgbe/0 and gbe/0, 16 MB of buffers will be placed on controller 1,
+        and the other 16 MB will be placed on controller 2.
+
+      - For xgbe/1 and gbe/1, 16 MB of buffers will be placed on controller 2,
+        and the other 16 MB will be placed on controller 3.
+
+      If @ref total_buffer_size is nonzero, but all weights are zero,
+      then all buffer space will be allocated on Linux NUMA node zero.
+
+      By default, the specified buffer placement is treated as a hint;
+      if sufficient free memory is not available on the specified
+      controllers, the buffers will be allocated elsewhere.  However,
+      if the ::NETIO_STRICT_HOMING flag is specified in @ref flags, then a
+      failure to allocate buffer space exactly as requested will cause the
+      registration operation to fail with an error of ::NETIO_CANNOT_HOME.
+
+      Note that maximal network performance cannot be achieved with
+      only one memory controller.
+   */
+  uint8_t buffer_node_weights[NETIO_NUM_NODE_WEIGHTS];
+
+  /** Fixed virtual address for packet buffers.  Only valid when
+      ::NETIO_FIXED_BUFFER_VA is specified in @ref flags; see the
+      description of that flag for details.
+   */
+  void* fixed_buffer_va;
+
+  /**
+      Maximum number of outstanding send packet requests.  This value is
+      only relevant when an EPP is in use; it determines the number of
+      slots in the EPP's outgoing packet queue which this tile is allowed
+      to consume, and thus the number of packets which may be sent before
+      the sending tile must wait for an acknowledgment from the EPP.
+      Modifying this value is generally only helpful when using @ref
+      netio_send_packet_vector(), where it can help improve performance by
+      allowing a single vector send operation to process more packets.
+      Typically it is not specified, and the default, which divides the
+      outgoing packet slots evenly between all tiles on the chip, is used.
+
+      If a registration asks for more outgoing packet queue slots than are
+      available, ::NETIO_TOOMANY_XMIT will be returned.  The total number
+      of packet queue slots which are available for all tiles for each EPP
+      is subject to change, but is currently ::NETIO_TOTAL_SENDS_OUTSTANDING.
+
+
+      This value is ignored if ::NETIO_XMIT is not specified in flags.
+      If you want to specify a large value here for a specific tile, you are
+      advised to specify NETIO_NO_XMIT on other, non-transmitting tiles so
+      that they do not consume a default number of packet slots.  Any tile
+      transmitting is required to have at least ::NETIO_MIN_SENDS_OUTSTANDING
+      slots allocated to it; values less than that will be silently
+      increased by the NetIO library.
+   */
+  int num_sends_outstanding;
+}
+netio_input_config_t;
+
+
+/** Registration flags; used in the @ref netio_input_config_t structure.
+ * @addtogroup setup
+ */
+/** @{ */
+
+/** Fail a registration request if we can't put packet buffers
+    on the specified memory controllers. */
+#define NETIO_STRICT_HOMING   0x00000002
+
+/** This application expects no tags on its L2 headers. */
+#define NETIO_TAG_NONE        0x00000004
+
+/** This application expects Marvell extended tags on its L2 headers. */
+#define NETIO_TAG_MRVL        0x00000008
+
+/** This application expects Broadcom tags on its L2 headers. */
+#define NETIO_TAG_BRCM        0x00000010
+
+/** This registration may call routines which receive packets. */
+#define NETIO_RECV            0x00000020
+
+/** This registration may not call routines which receive packets. */
+#define NETIO_NO_RECV         0x00000040
+
+/** This registration may call routines which transmit packets. */
+#define NETIO_XMIT            0x00000080
+
+/** This registration may call routines which transmit packets with
+    checksum acceleration. */
+#define NETIO_XMIT_CSUM       0x00000100
+
+/** This registration may not call routines which transmit packets. */
+#define NETIO_NO_XMIT         0x00000200
+
+/** This registration wants NetIO buffers mapped at an application-specified
+    virtual address.
+
+    NetIO buffers are by default created by the TMC common memory facility,
+    which must be configured by a common ancestor of all processes sharing
+    a network interface.  When this flag is specified, NetIO buffers are
+    instead mapped at an address chosen by the application (and specified
+    in @ref netio_input_config_t::fixed_buffer_va).  This allows multiple
+    unrelated but cooperating processes to share a NetIO interface.
+    All processes sharing the same interface must specify this flag,
+    and all must specify the same fixed virtual address.
+
+    @ref netio_input_config_t::fixed_buffer_va must be a
+    multiple of 16 MB, and the packet buffers will occupy @ref
+    netio_input_config_t::total_buffer_size bytes of virtual address
+    space, beginning at that address.  If any of those virtual addresses
+    are currently occupied by other memory objects, like application or
+    shared library code or data, @ref netio_input_register() will return
+    ::NETIO_FAULT.  While it is impossible to provide a fixed_buffer_va
+    which will work for all applications, a good first guess might be to
+    use 0xb0000000 minus @ref netio_input_config_t::total_buffer_size.
+    If that fails, it might be helpful to consult the running application's
+    virtual address description file (/proc/<em>pid</em>/maps) to see
+    which regions of virtual address space are available.
+ */
+#define NETIO_FIXED_BUFFER_VA 0x00000400
+
+/** This registration call will not complete unless the network link
+    is up.  The process will wait several seconds for this to happen (the
+    precise interval is link-dependent), but if the link does not come up,
+    ::NETIO_LINK_DOWN will be returned.  This flag is the default if
+    ::NETIO_NOREQUIRE_LINK_UP is not specified.  Note that this flag by
+    itself does not request that the link be brought up; that can be done
+    with the ::NETIO_AUTO_LINK_UPDN or ::NETIO_AUTO_LINK_UP flags (the
+    latter is the default if no NETIO_AUTO_LINK_xxx flags are specified),
+    or by explicitly setting the link's desired state via netio_set().
+    If the link is not brought up by one of those methods, and this flag
+    is specified, the registration operation will return ::NETIO_LINK_DOWN.
+    This flag is ignored if it is specified along with ::NETIO_NO_XMIT and
+    ::NETIO_NO_RECV.  See @ref link for more information on link
+    management.
+ */
+#define NETIO_REQUIRE_LINK_UP    0x00000800
+
+/** This registration call will complete even if the network link is not up.
+    Whenever the link is not up, packets will not be sent or received:
+    netio_get_packet() will return ::NETIO_NOPKT once all queued packets
+    have been drained, and netio_send_packet() and similar routines will
+    return NETIO_QUEUE_FULL once the outgoing packet queue in the EPP
+    or the I/O shim is full.  See @ref link for more information on link
+    management.
+ */
+#define NETIO_NOREQUIRE_LINK_UP  0x00001000
+
+#ifndef __DOXYGEN__
+/*
+ * These are part of the implementation of the NETIO_AUTO_LINK_xxx flags,
+ * but should not be used directly by applications, and are thus not
+ * documented.
+ */
+#define _NETIO_AUTO_UP        0x00002000
+#define _NETIO_AUTO_DN        0x00004000
+#define _NETIO_AUTO_PRESENT   0x00008000
+#endif
+
+/** Set the desired state of the link to up, allowing any speeds which are
+    supported by the link hardware, as part of this registration operation.
+    Do not take down the link automatically.  This is the default if
+    no other NETIO_AUTO_LINK_xxx flags are specified.  This flag is ignored
+    if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+    See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_UP     (_NETIO_AUTO_PRESENT | _NETIO_AUTO_UP)
+
+/** Set the desired state of the link to up, allowing any speeds which are
+    supported by the link hardware, as part of this registration operation.
+    Set the desired state of the link to down the next time no tiles are
+    registered for packet reception or transmission.  This flag is ignored
+    if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+    See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_UPDN   (_NETIO_AUTO_PRESENT | _NETIO_AUTO_UP | \
+                                _NETIO_AUTO_DN)
+
+/** Set the desired state of the link to down the next time no tiles are
+    registered for packet reception or transmission.  This flag is ignored
+    if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+    See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_DN     (_NETIO_AUTO_PRESENT | _NETIO_AUTO_DN)
+
+/** Do not bring up the link automatically as part of this registration
+    operation.  Do not take down the link automatically.  This flag
+    is ignored if it is specified along with ::NETIO_NO_XMIT and
+    ::NETIO_NO_RECV.  See @ref link for more information on link management.
+  */
+#define NETIO_AUTO_LINK_NONE   _NETIO_AUTO_PRESENT
+
+
+/** Minimum number of receive packets. */
+#define NETIO_MIN_RECEIVE_PKTS            16
+
+/** Lower bound on the maximum number of receive packets; may be higher
+    than this on some interfaces. */
+#define NETIO_MAX_RECEIVE_PKTS           128
+
+/** Maximum number of send buffers, per packet size. */
+#define NETIO_MAX_SEND_BUFFERS            16
+
+/** Number of EPP queue slots, and thus outstanding sends, per EPP. */
+#define NETIO_TOTAL_SENDS_OUTSTANDING   2015
+
+/** Minimum number of EPP queue slots, and thus outstanding sends, per
+ *  transmitting tile. */
+#define NETIO_MIN_SENDS_OUTSTANDING       16
+
+
+/**@}*/
+
+#ifndef __DOXYGEN__
+
+/**
+ * An object for providing Ethernet packets to a process.
+ */
+struct __netio_queue_impl_t;
+
+/**
+ * An object for managing the user end of a NetIO queue.
+ */
+struct __netio_queue_user_impl_t;
+
+#endif /* !__DOXYGEN__ */
+
+
+/** A netio_queue_t describes a NetIO communications endpoint.
+ * @ingroup setup
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+  uint8_t opaque[8];                 /**< This is an opaque structure. */
+#else
+  struct __netio_queue_impl_t* __system_part;    /**< The system part. */
+  struct __netio_queue_user_impl_t* __user_part; /**< The user part. */
+#ifdef _NETIO_PTHREAD
+  _netio_percpu_mutex_t lock;                    /**< Queue lock. */
+#endif
+#endif
+}
+netio_queue_t;
+
+
+/**
+ * @brief Packet send context.
+ *
+ * @ingroup egress
+ *
+ * Packet send context for use with netio_send_packet_prepare and _commit.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+  uint8_t opaque[44];   /**< This is an opaque structure. */
+#else
+  uint8_t flags;        /**< Defined below */
+  uint8_t datalen;      /**< Number of valid words pointed to by data. */
+  uint32_t request[9];  /**< Request to be sent to the EPP or shim.  Note
+                             that this is smaller than the 11-word maximum
+                             request size, since some constant values are
+                             not saved in the context. */
+  uint32_t *data;       /**< Data to be sent to the EPP or shim via IDN. */
+#endif
+}
+netio_send_pkt_context_t;
+
+
+#ifndef __DOXYGEN__
+#define SEND_PKT_CTX_USE_EPP   1  /**< We're sending to an EPP. */
+#define SEND_PKT_CTX_SEND_CSUM 2  /**< Request includes a checksum. */
+#endif
+
+/**
+ * @brief Packet vector entry.
+ *
+ * @ingroup egress
+ *
+ * This data structure is used with netio_send_packet_vector() to send multiple
+ * packets with one NetIO call.  The structure should be initialized by
+ * calling netio_pkt_vector_set(), rather than by setting the fields
+ * directly.
+ *
+ * This structure is guaranteed to be a power of two in size, no
+ * bigger than one L2 cache line, and to be aligned modulo its size.
+ */
+typedef struct
+#ifndef __DOXYGEN__
+__attribute__((aligned(8)))
+#endif
+{
+  /** Reserved for use by the user application.  When initialized with
+   *  the netio_set_pkt_vector_entry() function, this field is guaranteed
+   *  to be visible to readers only after all other fields are already
+   *  visible.  This way it can be used as a valid flag or generation
+   *  counter. */
+  uint8_t user_data;
+
+  /* Structure members below this point should not be accessed directly by
+   * applications, as they may change in the future. */
+
+  /** Low 8 bits of the packet address to send.  The high bits are
+   *  acquired from the 'handle' field. */
+  uint8_t buffer_address_low;
+
+  /** Number of bytes to transmit. */
+  uint16_t size;
+
+  /** The raw handle from a netio_pkt_t.  If this is NETIO_PKT_HANDLE_NONE,
+   *  this vector entry will be skipped and no packet will be transmitted. */
+  netio_pkt_handle_t handle;
+}
+netio_pkt_vector_entry_t;
+
+
+/**
+ * @brief Initialize fields in a packet vector entry.
+ *
+ * @ingroup egress
+ *
+ * @param[out] v Pointer to the vector entry to be initialized.
+ * @param[in] pkt Packet to be transmitted when the vector entry is passed to
+ *        netio_send_packet_vector().  Note that the packet's attributes
+ *        (e.g., its L2 offset and length) are captured at the time this
+ *        routine is called; subsequent changes in those attributes will not
+ *        be reflected in the packet which is actually transmitted.
+ *        Changes in the packet's contents, however, will be so reflected.
+ *        If this is NULL, no packet will be transmitted.
+ * @param[in] user_data User data to be set in the vector entry.
+ *        This function guarantees that the "user_data" field will become
+ *        visible to a reader only after all other fields have become visible.
+ *        This allows a structure in a ring buffer to be written and read
+ *        by a polling reader without any locks or other synchronization.
+ */
+static __inline void
+netio_pkt_vector_set(volatile netio_pkt_vector_entry_t* v, netio_pkt_t* pkt,
+                     uint8_t user_data)
+{
+  if (pkt)
+  {
+    if (NETIO_PKT_IS_MINIMAL(pkt))
+    {
+      netio_pkt_minimal_metadata_t* mmd =
+        (netio_pkt_minimal_metadata_t*) &pkt->__metadata;
+      v->buffer_address_low = (uintptr_t) NETIO_PKT_L2_DATA_MM(mmd, pkt) & 0xFF;
+      v->size = NETIO_PKT_L2_LENGTH_MM(mmd, pkt);
+    }
+    else
+    {
+      netio_pkt_metadata_t* mda = &pkt->__metadata;
+      v->buffer_address_low = (uintptr_t) NETIO_PKT_L2_DATA_M(mda, pkt) & 0xFF;
+      v->size = NETIO_PKT_L2_LENGTH_M(mda, pkt);
+    }
+    v->handle.word = pkt->__packet.word;
+  }
+  else
+  {
+    v->handle.word = 0;   /* Set handle to NETIO_PKT_HANDLE_NONE. */
+  }
+
+  __asm__("" : : : "memory");
+
+  v->user_data = user_data;
+}
+
+
+/**
+ * Flags and structures for @ref netio_get() and @ref netio_set().
+ * @ingroup config
+ */
+
+/** @{ */
+/** Parameter class; addr is a NETIO_PARAM_xxx value. */
+#define NETIO_PARAM       0
+/** Interface MAC address. This address is only valid with @ref netio_get().
+ *  The value is a 6-byte MAC address.  Depending upon the overall system
+ *  design, a MAC address may or may not be available for each interface. */
+#define NETIO_PARAM_MAC        0
+
+/** Determine whether to suspend output on the receipt of pause frames.
+ *  If the value is nonzero, the I/O shim will suspend output when a pause
+ *  frame is received.  If the value is zero, pause frames will be ignored. */
+#define NETIO_PARAM_PAUSE_IN   1
+
+/** Determine whether to send pause frames if the I/O shim packet FIFOs are
+ *  nearly full.  If the value is zero, pause frames are not sent.  If
+ *  the value is nonzero, it is the delay value which will be sent in any
+ *  pause frames which are output, in units of 512 bit times. */
+#define NETIO_PARAM_PAUSE_OUT  2
+
+/** Jumbo frame support.  The value is a 4-byte integer.  If the value is
+ *  nonzero, the MAC will accept frames of up to 10240 bytes.  If the value
+ *  is zero, the MAC will only accept frames of up to 1544 bytes. */
+#define NETIO_PARAM_JUMBO      3
+
+/** I/O shim's overflow statistics register.  The value is two 16-bit integers.
+ *  The first 16-bit value (or the low 16 bits, if the value is treated as a
+ *  32-bit number) is the count of packets which were completely dropped and
+ *  not delivered by the shim.  The second 16-bit value (or the high 16 bits,
+ *  if the value is treated as a 32-bit number) is the count of packets
+ *  which were truncated and thus only partially delivered by the shim.  This
+ *  register is automatically reset to zero after it has been read.
+ */
+#define NETIO_PARAM_OVERFLOW   4
+
+/** IPP statistics.  This address is only valid with @ref netio_get().  The
+ *  value is a netio_stat_t structure.  Unlike the I/O shim statistics, the
+ *  IPP statistics are not all reset to zero on read; see the description
+ *  of the netio_stat_t for details. */
+#define NETIO_PARAM_STAT 5
+
+/** Possible link state.  The value is a combination of "NETIO_LINK_xxx"
+ *  flags.  With @ref netio_get(), this will indicate which flags are
+ *  actually supported by the hardware.
+ *
+ *  For historical reasons, specifying this value to netio_set() will have
+ *  the same behavior as using ::NETIO_PARAM_LINK_CONFIG, but this usage is
+ *  discouraged.
+ */
+#define NETIO_PARAM_LINK_POSSIBLE_STATE 6
+
+/** Link configuration. The value is a combination of "NETIO_LINK_xxx" flags.
+ *  With @ref netio_set(), this will attempt to immediately bring up the
+ *  link using whichever of the requested flags are supported by the
+ *  hardware, or take down the link if the flags are zero; if this is
+ *  not possible, an error will be returned.  Many programs will want
+ *  to use ::NETIO_PARAM_LINK_DESIRED_STATE instead.
+ *
+ *  For historical reasons, specifying this value to netio_get() will
+ *  have the same behavior as using ::NETIO_PARAM_LINK_POSSIBLE_STATE,
+ *  but this usage is discouraged.
+ */
+#define NETIO_PARAM_LINK_CONFIG NETIO_PARAM_LINK_POSSIBLE_STATE
+
+/** Current link state. This address is only valid with @ref netio_get().
+ *  The value is zero or more of the "NETIO_LINK_xxx" flags, ORed together.
+ *  If the link is down, the value ANDed with NETIO_LINK_SPEED will be
+ *  zero; if the link is up, the value ANDed with NETIO_LINK_SPEED will
+ *  result in exactly one of the NETIO_LINK_xxx values, indicating the
+ *  current speed. */
+#define NETIO_PARAM_LINK_CURRENT_STATE 7
+
+/** Variant symbol for current state, retained for compatibility with
+ *  pre-MDE-2.1 programs. */
+#define NETIO_PARAM_LINK_STATUS NETIO_PARAM_LINK_CURRENT_STATE
+
+/** Packet Coherence protocol. This address is only valid with @ref netio_get().
+ *  The value is nonzero if the interface is configured for cache-coherent DMA.
+ */
+#define NETIO_PARAM_COHERENT 8
+
+/** Desired link state. The value is a conbination of "NETIO_LINK_xxx"
+ *  flags, which specify the desired state for the link.  With @ref
+ *  netio_set(), this will, in the background, attempt to bring up the link
+ *  using whichever of the requested flags are reasonable, or take down the
+ *  link if the flags are zero.  The actual link up or down operation may
+ *  happen after this call completes.  If the link state changes in the
+ *  future, the system will continue to try to get back to the desired link
+ *  state; for instance, if the link is brought up successfully, and then
+ *  the network cable is disconnected, the link will go down.  However, the
+ *  desired state of the link is still up, so if the cable is reconnected,
+ *  the link will be brought up again.
+ *
+ *  With @ref netio_get(), this will indicate the desired state for the
+ *  link, as set with a previous netio_set() call, or implicitly by a
+ *  netio_input_register() or netio_input_unregister() operation.  This may
+ *  not reflect the current state of the link; to get that, use
+ *  ::NETIO_PARAM_LINK_CURRENT_STATE. */
+#define NETIO_PARAM_LINK_DESIRED_STATE 9
+
+/** NetIO statistics structure.  Retrieved using the ::NETIO_PARAM_STAT
+ *  address passed to @ref netio_get(). */
+typedef struct
+{
+  /** Number of packets which have been received by the IPP and forwarded
+   *  to a tile's receive queue for processing.  This value wraps at its
+   *  maximum, and is not cleared upon read. */
+  uint32_t packets_received;
+
+  /** Number of packets which have been dropped by the IPP, because they could
+   *  not be received, or could not be forwarded to a tile.  The former happens
+   *  when the IPP does not have a free packet buffer of suitable size for an
+   *  incoming frame.  The latter happens when all potential destination tiles
+   *  for a packet, as defined by the group, bucket, and queue configuration,
+   *  have full receive queues.   This value wraps at its maximum, and is not
+   *  cleared upon read. */
+  uint32_t packets_dropped;
+
+  /*
+   * Note: the #defines after each of the following four one-byte values
+   * denote their location within the third word of the netio_stat_t.  They
+   * are intended for use only by the IPP implementation and are thus omitted
+   * from the Doxygen output.
+   */
+
+  /** Number of packets dropped because no worker was able to accept a new
+   *  packet.  This value saturates at its maximum, and is cleared upon
+   *  read. */
+  uint8_t drops_no_worker;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_WORKER   0
+#endif
+
+  /** Number of packets dropped because no small buffers were available.
+   *  This value saturates at its maximum, and is cleared upon read. */
+  uint8_t drops_no_smallbuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_SMALLBUF 1
+#endif
+
+  /** Number of packets dropped because no large buffers were available.
+   *  This value saturates at its maximum, and is cleared upon read. */
+  uint8_t drops_no_largebuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_LARGEBUF 2
+#endif
+
+  /** Number of packets dropped because no jumbo buffers were available.
+   *  This value saturates at its maximum, and is cleared upon read. */
+  uint8_t drops_no_jumbobuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_JUMBOBUF 3
+#endif
+}
+netio_stat_t;
+
+
+/** Link can run, should run, or is running at 10 Mbps. */
+#define NETIO_LINK_10M         0x01
+
+/** Link can run, should run, or is running at 100 Mbps. */
+#define NETIO_LINK_100M        0x02
+
+/** Link can run, should run, or is running at 1 Gbps. */
+#define NETIO_LINK_1G          0x04
+
+/** Link can run, should run, or is running at 10 Gbps. */
+#define NETIO_LINK_10G         0x08
+
+/** Link should run at the highest speed supported by the link and by
+ *  the device connected to the link.  Only usable as a value for
+ *  the link's desired state; never returned as a value for the current
+ *  or possible states. */
+#define NETIO_LINK_ANYSPEED    0x10
+
+/** All legal link speeds. */
+#define NETIO_LINK_SPEED  (NETIO_LINK_10M  | \
+                           NETIO_LINK_100M | \
+                           NETIO_LINK_1G   | \
+                           NETIO_LINK_10G  | \
+                           NETIO_LINK_ANYSPEED)
+
+
+/** MAC register class.  Addr is a register offset within the MAC.
+ *  Registers within the XGbE and GbE MACs are documented in the Tile
+ *  Processor I/O Device Guide (UG104). MAC registers start at address
+ *  0x4000, and do not include the MAC_INTERFACE registers. */
+#define NETIO_MAC             1
+
+/** MDIO register class (IEEE 802.3 clause 22 format).  Addr is the "addr"
+ *  member of a netio_mdio_addr_t structure. */
+#define NETIO_MDIO            2
+
+/** MDIO register class (IEEE 802.3 clause 45 format).  Addr is the "addr"
+ *  member of a netio_mdio_addr_t structure. */
+#define NETIO_MDIO_CLAUSE45   3
+
+/** NetIO MDIO address type.  Retrieved or provided using the ::NETIO_MDIO
+ *  address passed to @ref netio_get() or @ref netio_set(). */
+typedef union
+{
+  struct
+  {
+    unsigned int reg:16;  /**< MDIO register offset.  For clause 22 access,
+                               must be less than 32. */
+    unsigned int phy:5;   /**< Which MDIO PHY to access. */
+    unsigned int dev:5;   /**< Which MDIO device to access within that PHY.
+                               Applicable for clause 45 access only; ignored
+                               for clause 22 access. */
+  }
+  bits;                   /**< Container for bitfields. */
+  uint64_t addr;          /**< Value to pass to @ref netio_get() or
+                           *   @ref netio_set(). */
+}
+netio_mdio_addr_t;
+
+/** @} */
+
+#endif /* __NETIO_INTF_H__ */
diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c
index 78e1982cb6c9..0b9ce69b0ee5 100644
--- a/arch/tile/mm/init.c
+++ b/arch/tile/mm/init.c
@@ -988,8 +988,12 @@ static long __write_once initfree = 1;
 /* Select whether to free (1) or mark unusable (0) the __init pages. */
 static int __init set_initfree(char *str)
 {
-	strict_strtol(str, 0, &initfree);
-	pr_info("initfree: %s free init pages\n", initfree ? "will" : "won't");
+	long val;
+	if (strict_strtol(str, 0, &val)) {
+		initfree = val;
+		pr_info("initfree: %s free init pages\n",
+			initfree ? "will" : "won't");
+	}
 	return 1;
 }
 __setup("initfree=", set_initfree);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f6668cdaac85..43db398437b7 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2945,6 +2945,18 @@ source "drivers/s390/net/Kconfig"
 
 source "drivers/net/caif/Kconfig"
 
+config TILE_NET
+	tristate "Tilera GBE/XGBE network driver support"
+	depends on TILE
+	default y
+	select CRC32
+	help
+	  This is a standard Linux network device driver for the
+	  on-chip Tilera Gigabit Ethernet and XAUI interfaces.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called tile_net.
+
 config XEN_NETDEV_FRONTEND
 	tristate "Xen network device frontend driver"
 	depends on XEN
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 652fc6b98039..b90738d13994 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -301,3 +301,4 @@ obj-$(CONFIG_CAIF) += caif/
 
 obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/
 obj-$(CONFIG_PCH_GBE) += pch_gbe/
+obj-$(CONFIG_TILE_NET) += tile/
diff --git a/drivers/net/tile/Makefile b/drivers/net/tile/Makefile
new file mode 100644
index 000000000000..f634f142cab4
--- /dev/null
+++ b/drivers/net/tile/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the TILE on-chip networking support.
+#
+
+obj-$(CONFIG_TILE_NET) += tile_net.o
+ifdef CONFIG_TILEGX
+tile_net-objs := tilegx.o mpipe.o iorpc_mpipe.o dma_queue.o
+else
+tile_net-objs := tilepro.o
+endif
diff --git a/drivers/net/tile/tilepro.c b/drivers/net/tile/tilepro.c
new file mode 100644
index 000000000000..0e6bac5ec65b
--- /dev/null
+++ b/drivers/net/tile/tilepro.c
@@ -0,0 +1,2406 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>      /* printk() */
+#include <linux/slab.h>        /* kmalloc() */
+#include <linux/errno.h>       /* error codes */
+#include <linux/types.h>       /* size_t */
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/netdevice.h>   /* struct device, and other headers */
+#include <linux/etherdevice.h> /* eth_type_trans */
+#include <linux/skbuff.h>
+#include <linux/ioctl.h>
+#include <linux/cdev.h>
+#include <linux/hugetlb.h>
+#include <linux/in6.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <asm/checksum.h>
+#include <asm/homecache.h>
+
+#include <hv/drv_xgbe_intf.h>
+#include <hv/drv_xgbe_impl.h>
+#include <hv/hypervisor.h>
+#include <hv/netio_intf.h>
+
+/* For TSO */
+#include <linux/ip.h>
+#include <linux/tcp.h>
+
+
+/* There is no singlethread_cpu, so schedule work on the current cpu. */
+#define singlethread_cpu -1
+
+
+/*
+ * First, "tile_net_init_module()" initializes all four "devices" which
+ * can be used by linux.
+ *
+ * Then, "ifconfig DEVICE up" calls "tile_net_open()", which analyzes
+ * the network cpus, then uses "tile_net_open_aux()" to initialize
+ * LIPP/LEPP, and then uses "tile_net_open_inner()" to register all
+ * the tiles, provide buffers to LIPP, allow ingress to start, and
+ * turn on hypervisor interrupt handling (and NAPI) on all tiles.
+ *
+ * If registration fails due to the link being down, then "retry_work"
+ * is used to keep calling "tile_net_open_inner()" until it succeeds.
+ *
+ * If "ifconfig DEVICE down" is called, it uses "tile_net_stop()" to
+ * stop egress, drain the LIPP buffers, unregister all the tiles, stop
+ * LIPP/LEPP, and wipe the LEPP queue.
+ *
+ * We start out with the ingress interrupt enabled on each CPU.  When
+ * this interrupt fires, we disable it, and call "napi_schedule()".
+ * This will cause "tile_net_poll()" to be called, which will pull
+ * packets from the netio queue, filtering them out, or passing them
+ * to "netif_receive_skb()".  If our budget is exhausted, we will
+ * return, knowing we will be called again later.  Otherwise, we
+ * reenable the ingress interrupt, and call "napi_complete()".
+ *
+ *
+ * NOTE: The use of "native_driver" ensures that EPP exists, and that
+ * "epp_sendv" is legal, and that "LIPP" is being used.
+ *
+ * NOTE: Failing to free completions for an arbitrarily long time
+ * (which is defined to be illegal) does in fact cause bizarre
+ * problems.  The "egress_timer" helps prevent this from happening.
+ *
+ * NOTE: The egress code can be interrupted by the interrupt handler.
+ */
+
+
+/* HACK: Allow use of "jumbo" packets. */
+/* This should be 1500 if "jumbo" is not set in LIPP. */
+/* This should be at most 10226 (10240 - 14) if "jumbo" is set in LIPP. */
+/* ISSUE: This has not been thoroughly tested (except at 1500). */
+#define TILE_NET_MTU 1500
+
+/* HACK: Define to support GSO. */
+/* ISSUE: This may actually hurt performance of the TCP blaster. */
+/* #define TILE_NET_GSO */
+
+/* Define this to collapse "duplicate" acks. */
+/* #define IGNORE_DUP_ACKS */
+
+/* HACK: Define this to verify incoming packets. */
+/* #define TILE_NET_VERIFY_INGRESS */
+
+/* Use 3000 to enable the Linux Traffic Control (QoS) layer, else 0. */
+#define TILE_NET_TX_QUEUE_LEN 0
+
+/* Define to dump packets (prints out the whole packet on tx and rx). */
+/* #define TILE_NET_DUMP_PACKETS */
+
+/* Define to enable debug spew (all PDEBUG's are enabled). */
+/* #define TILE_NET_DEBUG */
+
+
+/* Define to activate paranoia checks. */
+/* #define TILE_NET_PARANOIA */
+
+/* Default transmit lockup timeout period, in jiffies. */
+#define TILE_NET_TIMEOUT (5 * HZ)
+
+/* Default retry interval for bringing up the NetIO interface, in jiffies. */
+#define TILE_NET_RETRY_INTERVAL (5 * HZ)
+
+/* Number of ports (xgbe0, xgbe1, gbe0, gbe1). */
+#define TILE_NET_DEVS 4
+
+
+
+/* Paranoia. */
+#if NET_IP_ALIGN != LIPP_PACKET_PADDING
+#error "NET_IP_ALIGN must match LIPP_PACKET_PADDING."
+#endif
+
+
+/* Debug print. */
+#ifdef TILE_NET_DEBUG
+#define PDEBUG(fmt, args...) net_printk(fmt, ## args)
+#else
+#define PDEBUG(fmt, args...)
+#endif
+
+
+MODULE_AUTHOR("Tilera");
+MODULE_LICENSE("GPL");
+
+
+#define IS_MULTICAST(mac_addr) \
+	(((u8 *)(mac_addr))[0] & 0x01)
+
+#define IS_BROADCAST(mac_addr) \
+	(((u16 *)(mac_addr))[0] == 0xffff)
+
+
+/*
+ * Queue of incoming packets for a specific cpu and device.
+ *
+ * Includes a pointer to the "system" data, and the actual "user" data.
+ */
+struct tile_netio_queue {
+	netio_queue_impl_t *__system_part;
+	netio_queue_user_impl_t __user_part;
+
+};
+
+
+/*
+ * Statistics counters for a specific cpu and device.
+ */
+struct tile_net_stats_t {
+	u32 rx_packets;
+	u32 rx_bytes;
+	u32 tx_packets;
+	u32 tx_bytes;
+};
+
+
+/*
+ * Info for a specific cpu and device.
+ *
+ * ISSUE: There is a "dev" pointer in "napi" as well.
+ */
+struct tile_net_cpu {
+	/* The NAPI struct. */
+	struct napi_struct napi;
+	/* Packet queue. */
+	struct tile_netio_queue queue;
+	/* Statistics. */
+	struct tile_net_stats_t stats;
+	/* ISSUE: Is this needed? */
+	bool napi_enabled;
+	/* True if this tile has succcessfully registered with the IPP. */
+	bool registered;
+	/* True if the link was down last time we tried to register. */
+	bool link_down;
+	/* True if "egress_timer" is scheduled. */
+	bool egress_timer_scheduled;
+	/* Number of small sk_buffs which must still be provided. */
+	unsigned int num_needed_small_buffers;
+	/* Number of large sk_buffs which must still be provided. */
+	unsigned int num_needed_large_buffers;
+	/* A timer for handling egress completions. */
+	struct timer_list egress_timer;
+};
+
+
+/*
+ * Info for a specific device.
+ */
+struct tile_net_priv {
+	/* Our network device. */
+	struct net_device *dev;
+	/* The actual egress queue. */
+	lepp_queue_t *epp_queue;
+	/* Protects "epp_queue->cmd_tail" and "epp_queue->comp_tail" */
+	spinlock_t cmd_lock;
+	/* Protects "epp_queue->comp_head". */
+	spinlock_t comp_lock;
+	/* The hypervisor handle for this interface. */
+	int hv_devhdl;
+	/* The intr bit mask that IDs this device. */
+	u32 intr_id;
+	/* True iff "tile_net_open_aux()" has succeeded. */
+	int partly_opened;
+	/* True iff "tile_net_open_inner()" has succeeded. */
+	int fully_opened;
+	/* Effective network cpus. */
+	struct cpumask network_cpus_map;
+	/* Number of network cpus. */
+	int network_cpus_count;
+	/* Credits per network cpu. */
+	int network_cpus_credits;
+	/* Network stats. */
+	struct net_device_stats stats;
+	/* For NetIO bringup retries. */
+	struct delayed_work retry_work;
+	/* Quick access to per cpu data. */
+	struct tile_net_cpu *cpu[NR_CPUS];
+};
+
+
+/*
+ * The actual devices (xgbe0, xgbe1, gbe0, gbe1).
+ */
+static struct net_device *tile_net_devs[TILE_NET_DEVS];
+
+/*
+ * The "tile_net_cpu" structures for each device.
+ */
+static DEFINE_PER_CPU(struct tile_net_cpu, hv_xgbe0);
+static DEFINE_PER_CPU(struct tile_net_cpu, hv_xgbe1);
+static DEFINE_PER_CPU(struct tile_net_cpu, hv_gbe0);
+static DEFINE_PER_CPU(struct tile_net_cpu, hv_gbe1);
+
+
+/*
+ * True if "network_cpus" was specified.
+ */
+static bool network_cpus_used;
+
+/*
+ * The actual cpus in "network_cpus".
+ */
+static struct cpumask network_cpus_map;
+
+
+
+#ifdef TILE_NET_DEBUG
+/*
+ * printk with extra stuff.
+ *
+ * We print the CPU we're running in brackets.
+ */
+static void net_printk(char *fmt, ...)
+{
+	int i;
+	int len;
+	va_list args;
+	static char buf[256];
+
+	len = sprintf(buf, "tile_net[%2.2d]: ", smp_processor_id());
+	va_start(args, fmt);
+	i = vscnprintf(buf + len, sizeof(buf) - len - 1, fmt, args);
+	va_end(args);
+	buf[255] = '\0';
+	pr_notice(buf);
+}
+#endif
+
+
+#ifdef TILE_NET_DUMP_PACKETS
+/*
+ * Dump a packet.
+ */
+static void dump_packet(unsigned char *data, unsigned long length, char *s)
+{
+	unsigned long i;
+	static unsigned int count;
+
+	pr_info("dump_packet(data %p, length 0x%lx s %s count 0x%x)\n",
+	       data, length, s, count++);
+
+	pr_info("\n");
+
+	for (i = 0; i < length; i++) {
+		if ((i & 0xf) == 0)
+			sprintf(buf, "%8.8lx:", i);
+		sprintf(buf + strlen(buf), " %2.2x", data[i]);
+		if ((i & 0xf) == 0xf || i == length - 1)
+			pr_info("%s\n", buf);
+	}
+}
+#endif
+
+
+/*
+ * Provide support for the __netio_fastio1() swint
+ * (see <hv/drv_xgbe_intf.h> for how it is used).
+ *
+ * The fastio swint2 call may clobber all the caller-saved registers.
+ * It rarely clobbers memory, but we allow for the possibility in
+ * the signature just to be on the safe side.
+ *
+ * Also, gcc doesn't seem to allow an input operand to be
+ * clobbered, so we fake it with dummy outputs.
+ *
+ * This function can't be static because of the way it is declared
+ * in the netio header.
+ */
+inline int __netio_fastio1(u32 fastio_index, u32 arg0)
+{
+	long result, clobber_r1, clobber_r10;
+	asm volatile("swint2"
+		     : "=R00" (result),
+		       "=R01" (clobber_r1), "=R10" (clobber_r10)
+		     : "R10" (fastio_index), "R01" (arg0)
+		     : "memory", "r2", "r3", "r4",
+		       "r5", "r6", "r7", "r8", "r9",
+		       "r11", "r12", "r13", "r14",
+		       "r15", "r16", "r17", "r18", "r19",
+		       "r20", "r21", "r22", "r23", "r24",
+		       "r25", "r26", "r27", "r28", "r29");
+	return result;
+}
+
+
+/*
+ * Provide a linux buffer to LIPP.
+ */
+static void tile_net_provide_linux_buffer(struct tile_net_cpu *info,
+					  void *va, bool small)
+{
+	struct tile_netio_queue *queue = &info->queue;
+
+	/* Convert "va" and "small" to "linux_buffer_t". */
+	unsigned int buffer = ((unsigned int)(__pa(va) >> 7) << 1) + small;
+
+	__netio_fastio_free_buffer(queue->__user_part.__fastio_index, buffer);
+}
+
+
+/*
+ * Provide a linux buffer for LIPP.
+ */
+static bool tile_net_provide_needed_buffer(struct tile_net_cpu *info,
+					   bool small)
+{
+	/* ISSUE: What should we use here? */
+	unsigned int large_size = NET_IP_ALIGN + TILE_NET_MTU + 100;
+
+	/* Round up to ensure to avoid "false sharing" with last cache line. */
+	unsigned int buffer_size =
+		 (((small ? LIPP_SMALL_PACKET_SIZE : large_size) +
+		   CHIP_L2_LINE_SIZE() - 1) & -CHIP_L2_LINE_SIZE());
+
+	/*
+	 * ISSUE: Since CPAs are 38 bits, and we can only encode the
+	 * high 31 bits in a "linux_buffer_t", the low 7 bits must be
+	 * zero, and thus, we must align the actual "va" mod 128.
+	 */
+	const unsigned long align = 128;
+
+	struct sk_buff *skb;
+	void *va;
+
+	struct sk_buff **skb_ptr;
+
+	/* Note that "dev_alloc_skb()" adds NET_SKB_PAD more bytes, */
+	/* and also "reserves" that many bytes. */
+	/* ISSUE: Can we "share" the NET_SKB_PAD bytes with "skb_ptr"? */
+	int len = sizeof(*skb_ptr) + align + buffer_size;
+
+	while (1) {
+
+		/* Allocate (or fail). */
+		skb = dev_alloc_skb(len);
+		if (skb == NULL)
+			return false;
+
+		/* Make room for a back-pointer to 'skb'. */
+		skb_reserve(skb, sizeof(*skb_ptr));
+
+		/* Make sure we are aligned. */
+		skb_reserve(skb, -(long)skb->data & (align - 1));
+
+		/* This address is given to IPP. */
+		va = skb->data;
+
+		if (small)
+			break;
+
+		/* ISSUE: This has never been observed! */
+		/* Large buffers must not span a huge page. */
+		if (((((long)va & ~HPAGE_MASK) + 1535) & HPAGE_MASK) == 0)
+			break;
+		pr_err("Leaking unaligned linux buffer at %p.\n", va);
+	}
+
+	/* Skip two bytes to satisfy LIPP assumptions. */
+	/* Note that this aligns IP on a 16 byte boundary. */
+	/* ISSUE: Do this when the packet arrives? */
+	skb_reserve(skb, NET_IP_ALIGN);
+
+	/* Save a back-pointer to 'skb'. */
+	skb_ptr = va - sizeof(*skb_ptr);
+	*skb_ptr = skb;
+
+	/* Invalidate the packet buffer. */
+	if (!hash_default)
+		__inv_buffer(skb->data, buffer_size);
+
+	/* Make sure "skb_ptr" has been flushed. */
+	__insn_mf();
+
+#ifdef TILE_NET_PARANOIA
+#if CHIP_HAS_CBOX_HOME_MAP()
+	if (hash_default) {
+		HV_PTE pte = *virt_to_pte(current->mm, (unsigned long)va);
+		if (hv_pte_get_mode(pte) != HV_PTE_MODE_CACHE_HASH_L3)
+			panic("Non-coherent ingress buffer!");
+	}
+#endif
+#endif
+
+	/* Provide the new buffer. */
+	tile_net_provide_linux_buffer(info, va, small);
+
+	return true;
+}
+
+
+/*
+ * Provide linux buffers for LIPP.
+ */
+static void tile_net_provide_needed_buffers(struct tile_net_cpu *info)
+{
+	while (info->num_needed_small_buffers != 0) {
+		if (!tile_net_provide_needed_buffer(info, true))
+			goto oops;
+		info->num_needed_small_buffers--;
+	}
+
+	while (info->num_needed_large_buffers != 0) {
+		if (!tile_net_provide_needed_buffer(info, false))
+			goto oops;
+		info->num_needed_large_buffers--;
+	}
+
+	return;
+
+oops:
+
+	/* Add a description to the page allocation failure dump. */
+	pr_notice("Could not provide a linux buffer to LIPP.\n");
+}
+
+
+/*
+ * Grab some LEPP completions, and store them in "comps", of size
+ * "comps_size", and return the number of completions which were
+ * stored, so the caller can free them.
+ *
+ * If "pending" is not NULL, it will be set to true if there might
+ * still be some pending completions caused by this tile, else false.
+ */
+static unsigned int tile_net_lepp_grab_comps(struct net_device *dev,
+					     struct sk_buff *comps[],
+					     unsigned int comps_size,
+					     bool *pending)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	lepp_queue_t *eq = priv->epp_queue;
+
+	unsigned int n = 0;
+
+	unsigned int comp_head;
+	unsigned int comp_busy;
+	unsigned int comp_tail;
+
+	spin_lock(&priv->comp_lock);
+
+	comp_head = eq->comp_head;
+	comp_busy = eq->comp_busy;
+	comp_tail = eq->comp_tail;
+
+	while (comp_head != comp_busy && n < comps_size) {
+		comps[n++] = eq->comps[comp_head];
+		LEPP_QINC(comp_head);
+	}
+
+	if (pending != NULL)
+		*pending = (comp_head != comp_tail);
+
+	eq->comp_head = comp_head;
+
+	spin_unlock(&priv->comp_lock);
+
+	return n;
+}
+
+
+/*
+ * Make sure the egress timer is scheduled.
+ *
+ * Note that we use "schedule if not scheduled" logic instead of the more
+ * obvious "reschedule" logic, because "reschedule" is fairly expensive.
+ */
+static void tile_net_schedule_egress_timer(struct tile_net_cpu *info)
+{
+	if (!info->egress_timer_scheduled) {
+		mod_timer_pinned(&info->egress_timer, jiffies + 1);
+		info->egress_timer_scheduled = true;
+	}
+}
+
+
+/*
+ * The "function" for "info->egress_timer".
+ *
+ * This timer will reschedule itself as long as there are any pending
+ * completions expected (on behalf of any tile).
+ *
+ * ISSUE: Realistically, will the timer ever stop scheduling itself?
+ *
+ * ISSUE: This timer is almost never actually needed, so just use a global
+ * timer that can run on any tile.
+ *
+ * ISSUE: Maybe instead track number of expected completions, and free
+ * only that many, resetting to zero if "pending" is ever false.
+ */
+static void tile_net_handle_egress_timer(unsigned long arg)
+{
+	struct tile_net_cpu *info = (struct tile_net_cpu *)arg;
+	struct net_device *dev = info->napi.dev;
+
+	struct sk_buff *olds[32];
+	unsigned int wanted = 32;
+	unsigned int i, nolds = 0;
+	bool pending;
+
+	/* The timer is no longer scheduled. */
+	info->egress_timer_scheduled = false;
+
+	nolds = tile_net_lepp_grab_comps(dev, olds, wanted, &pending);
+
+	for (i = 0; i < nolds; i++)
+		kfree_skb(olds[i]);
+
+	/* Reschedule timer if needed. */
+	if (pending)
+		tile_net_schedule_egress_timer(info);
+}
+
+
+#ifdef IGNORE_DUP_ACKS
+
+/*
+ * Help detect "duplicate" ACKs.  These are sequential packets (for a
+ * given flow) which are exactly 66 bytes long, sharing everything but
+ * ID=2@0x12, Hsum=2@0x18, Ack=4@0x2a, WinSize=2@0x30, Csum=2@0x32,
+ * Tstamps=10@0x38.  The ID's are +1, the Hsum's are -1, the Ack's are
+ * +N, and the Tstamps are usually identical.
+ *
+ * NOTE: Apparently truly duplicate acks (with identical "ack" values),
+ * should not be collapsed, as they are used for some kind of flow control.
+ */
+static bool is_dup_ack(char *s1, char *s2, unsigned int len)
+{
+	int i;
+
+	unsigned long long ignorable = 0;
+
+	/* Identification. */
+	ignorable |= (1ULL << 0x12);
+	ignorable |= (1ULL << 0x13);
+
+	/* Header checksum. */
+	ignorable |= (1ULL << 0x18);
+	ignorable |= (1ULL << 0x19);
+
+	/* ACK. */
+	ignorable |= (1ULL << 0x2a);
+	ignorable |= (1ULL << 0x2b);
+	ignorable |= (1ULL << 0x2c);
+	ignorable |= (1ULL << 0x2d);
+
+	/* WinSize. */
+	ignorable |= (1ULL << 0x30);
+	ignorable |= (1ULL << 0x31);
+
+	/* Checksum. */
+	ignorable |= (1ULL << 0x32);
+	ignorable |= (1ULL << 0x33);
+
+	for (i = 0; i < len; i++, ignorable >>= 1) {
+
+		if ((ignorable & 1) || (s1[i] == s2[i]))
+			continue;
+
+#ifdef TILE_NET_DEBUG
+		/* HACK: Mention non-timestamp diffs. */
+		if (i < 0x38 && i != 0x2f &&
+		    net_ratelimit())
+			pr_info("Diff at 0x%x\n", i);
+#endif
+
+		return false;
+	}
+
+#ifdef TILE_NET_NO_SUPPRESS_DUP_ACKS
+	/* HACK: Do not suppress truly duplicate ACKs. */
+	/* ISSUE: Is this actually necessary or helpful? */
+	if (s1[0x2a] == s2[0x2a] &&
+	    s1[0x2b] == s2[0x2b] &&
+	    s1[0x2c] == s2[0x2c] &&
+	    s1[0x2d] == s2[0x2d]) {
+		return false;
+	}
+#endif
+
+	return true;
+}
+
+#endif
+
+
+
+/*
+ * Like "tile_net_handle_packets()", but just discard packets.
+ */
+static void tile_net_discard_packets(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+	struct tile_netio_queue *queue = &info->queue;
+	netio_queue_impl_t *qsp = queue->__system_part;
+	netio_queue_user_impl_t *qup = &queue->__user_part;
+
+	while (qup->__packet_receive_read !=
+	       qsp->__packet_receive_queue.__packet_write) {
+
+		int index = qup->__packet_receive_read;
+
+		int index2_aux = index + sizeof(netio_pkt_t);
+		int index2 =
+			((index2_aux ==
+			  qsp->__packet_receive_queue.__last_packet_plus_one) ?
+			 0 : index2_aux);
+
+		netio_pkt_t *pkt = (netio_pkt_t *)
+			((unsigned long) &qsp[1] + index);
+
+		/* Extract the "linux_buffer_t". */
+		unsigned int buffer = pkt->__packet.word;
+
+		/* Convert "linux_buffer_t" to "va". */
+		void *va = __va((phys_addr_t)(buffer >> 1) << 7);
+
+		/* Acquire the associated "skb". */
+		struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
+		struct sk_buff *skb = *skb_ptr;
+
+		kfree_skb(skb);
+
+		/* Consume this packet. */
+		qup->__packet_receive_read = index2;
+	}
+}
+
+
+/*
+ * Handle the next packet.  Return true if "processed", false if "filtered".
+ */
+static bool tile_net_poll_aux(struct tile_net_cpu *info, int index)
+{
+	struct net_device *dev = info->napi.dev;
+
+	struct tile_netio_queue *queue = &info->queue;
+	netio_queue_impl_t *qsp = queue->__system_part;
+	netio_queue_user_impl_t *qup = &queue->__user_part;
+	struct tile_net_stats_t *stats = &info->stats;
+
+	int filter;
+
+	int index2_aux = index + sizeof(netio_pkt_t);
+	int index2 =
+		((index2_aux ==
+		  qsp->__packet_receive_queue.__last_packet_plus_one) ?
+		 0 : index2_aux);
+
+	netio_pkt_t *pkt = (netio_pkt_t *)((unsigned long) &qsp[1] + index);
+
+	netio_pkt_metadata_t *metadata = NETIO_PKT_METADATA(pkt);
+
+	/* Extract the packet size. */
+	unsigned long len =
+		(NETIO_PKT_CUSTOM_LENGTH(pkt) +
+		 NET_IP_ALIGN - NETIO_PACKET_PADDING);
+
+	/* Extract the "linux_buffer_t". */
+	unsigned int buffer = pkt->__packet.word;
+
+	/* Extract "small" (vs "large"). */
+	bool small = ((buffer & 1) != 0);
+
+	/* Convert "linux_buffer_t" to "va". */
+	void *va = __va((phys_addr_t)(buffer >> 1) << 7);
+
+	/* Extract the packet data pointer. */
+	/* Compare to "NETIO_PKT_CUSTOM_DATA(pkt)". */
+	unsigned char *buf = va + NET_IP_ALIGN;
+
+#ifdef IGNORE_DUP_ACKS
+
+	static int other;
+	static int final;
+	static int keep;
+	static int skip;
+
+#endif
+
+	/* Invalidate the packet buffer. */
+	if (!hash_default)
+		__inv_buffer(buf, len);
+
+	/* ISSUE: Is this needed? */
+	dev->last_rx = jiffies;
+
+#ifdef TILE_NET_DUMP_PACKETS
+	dump_packet(buf, len, "rx");
+#endif /* TILE_NET_DUMP_PACKETS */
+
+#ifdef TILE_NET_VERIFY_INGRESS
+	if (!NETIO_PKT_L4_CSUM_CORRECT_M(metadata, pkt) &&
+	    NETIO_PKT_L4_CSUM_CALCULATED_M(metadata, pkt)) {
+		/*
+		 * FIXME: This complains about UDP packets
+		 * with a "zero" checksum (bug 6624).
+		 */
+#ifdef TILE_NET_PANIC_ON_BAD
+		dump_packet(buf, len, "rx");
+		panic("Bad L4 checksum.");
+#else
+		pr_warning("Bad L4 checksum on %d byte packet.\n", len);
+#endif
+	}
+	if (!NETIO_PKT_L3_CSUM_CORRECT_M(metadata, pkt) &&
+	    NETIO_PKT_L3_CSUM_CALCULATED_M(metadata, pkt)) {
+		dump_packet(buf, len, "rx");
+		panic("Bad L3 checksum.");
+	}
+	switch (NETIO_PKT_STATUS_M(metadata, pkt)) {
+	case NETIO_PKT_STATUS_OVERSIZE:
+		if (len >= 64) {
+			dump_packet(buf, len, "rx");
+			panic("Unexpected OVERSIZE.");
+		}
+		break;
+	case NETIO_PKT_STATUS_BAD:
+#ifdef TILE_NET_PANIC_ON_BAD
+		dump_packet(buf, len, "rx");
+		panic("Unexpected BAD packet.");
+#else
+		pr_warning("Unexpected BAD %d byte packet.\n", len);
+#endif
+	}
+#endif
+
+	filter = 0;
+
+	if (!(dev->flags & IFF_UP)) {
+		/* Filter packets received before we're up. */
+		filter = 1;
+	} else if (!(dev->flags & IFF_PROMISC)) {
+		/*
+		 * FIXME: Implement HW multicast filter.
+		 */
+		if (!IS_MULTICAST(buf) && !IS_BROADCAST(buf)) {
+			/* Filter packets not for our address. */
+			const u8 *mine = dev->dev_addr;
+			filter = compare_ether_addr(mine, buf);
+		}
+	}
+
+#ifdef IGNORE_DUP_ACKS
+
+	if (len != 66) {
+		/* FIXME: Must check "is_tcp_ack(buf, len)" somehow. */
+
+		other++;
+
+	} else if (index2 ==
+		   qsp->__packet_receive_queue.__packet_write) {
+
+		final++;
+
+	} else {
+
+		netio_pkt_t *pkt2 = (netio_pkt_t *)
+			((unsigned long) &qsp[1] + index2);
+
+		netio_pkt_metadata_t *metadata2 =
+			NETIO_PKT_METADATA(pkt2);
+
+		/* Extract the packet size. */
+		unsigned long len2 =
+			(NETIO_PKT_CUSTOM_LENGTH(pkt2) +
+			 NET_IP_ALIGN - NETIO_PACKET_PADDING);
+
+		if (len2 == 66 &&
+		    NETIO_PKT_FLOW_HASH_M(metadata, pkt) ==
+		    NETIO_PKT_FLOW_HASH_M(metadata2, pkt2)) {
+
+			/* Extract the "linux_buffer_t". */
+			unsigned int buffer2 = pkt2->__packet.word;
+
+			/* Convert "linux_buffer_t" to "va". */
+			void *va2 =
+				__va((phys_addr_t)(buffer2 >> 1) << 7);
+
+			/* Extract the packet data pointer. */
+			/* Compare to "NETIO_PKT_CUSTOM_DATA(pkt)". */
+			unsigned char *buf2 = va2 + NET_IP_ALIGN;
+
+			/* Invalidate the packet buffer. */
+			if (!hash_default)
+				__inv_buffer(buf2, len2);
+
+			if (is_dup_ack(buf, buf2, len)) {
+				skip++;
+				filter = 1;
+			} else {
+				keep++;
+			}
+		}
+	}
+
+	if (net_ratelimit())
+		pr_info("Other %d Final %d Keep %d Skip %d.\n",
+			other, final, keep, skip);
+
+#endif
+
+	if (filter) {
+
+		/* ISSUE: Update "drop" statistics? */
+
+		tile_net_provide_linux_buffer(info, va, small);
+
+	} else {
+
+		/* Acquire the associated "skb". */
+		struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
+		struct sk_buff *skb = *skb_ptr;
+
+		/* Paranoia. */
+		if (skb->data != buf)
+			panic("Corrupt linux buffer from LIPP! "
+			      "VA=%p, skb=%p, skb->data=%p\n",
+			      va, skb, skb->data);
+
+		/* Encode the actual packet length. */
+		skb_put(skb, len);
+
+		/* NOTE: This call also sets "skb->dev = dev". */
+		skb->protocol = eth_type_trans(skb, dev);
+
+		/* ISSUE: Discard corrupt packets? */
+		/* ISSUE: Discard packets with bad checksums? */
+
+		/* Avoid recomputing TCP/UDP checksums. */
+		if (NETIO_PKT_L4_CSUM_CORRECT_M(metadata, pkt))
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+		netif_receive_skb(skb);
+
+		stats->rx_packets++;
+		stats->rx_bytes += len;
+
+		if (small)
+			info->num_needed_small_buffers++;
+		else
+			info->num_needed_large_buffers++;
+	}
+
+	/* Return four credits after every fourth packet. */
+	if (--qup->__receive_credit_remaining == 0) {
+		u32 interval = qup->__receive_credit_interval;
+		qup->__receive_credit_remaining = interval;
+		__netio_fastio_return_credits(qup->__fastio_index, interval);
+	}
+
+	/* Consume this packet. */
+	qup->__packet_receive_read = index2;
+
+	return !filter;
+}
+
+
+/*
+ * Handle some packets for the given device on the current CPU.
+ *
+ * ISSUE: The "rotting packet" race condition occurs if a packet
+ * arrives after the queue appears to be empty, and before the
+ * hypervisor interrupt is re-enabled.
+ */
+static int tile_net_poll(struct napi_struct *napi, int budget)
+{
+	struct net_device *dev = napi->dev;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+	struct tile_netio_queue *queue = &info->queue;
+	netio_queue_impl_t *qsp = queue->__system_part;
+	netio_queue_user_impl_t *qup = &queue->__user_part;
+
+	unsigned int work = 0;
+
+	while (1) {
+		int index = qup->__packet_receive_read;
+		if (index == qsp->__packet_receive_queue.__packet_write)
+			break;
+
+		if (tile_net_poll_aux(info, index)) {
+			if (++work >= budget)
+				goto done;
+		}
+	}
+
+	napi_complete(&info->napi);
+
+	/* Re-enable hypervisor interrupts. */
+	enable_percpu_irq(priv->intr_id);
+
+	/* HACK: Avoid the "rotting packet" problem. */
+	if (qup->__packet_receive_read !=
+	    qsp->__packet_receive_queue.__packet_write)
+		napi_schedule(&info->napi);
+
+	/* ISSUE: Handle completions? */
+
+done:
+
+	tile_net_provide_needed_buffers(info);
+
+	return work;
+}
+
+
+/*
+ * Handle an ingress interrupt for the given device on the current cpu.
+ */
+static irqreturn_t tile_net_handle_ingress_interrupt(int irq, void *dev_ptr)
+{
+	struct net_device *dev = (struct net_device *)dev_ptr;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+	/* Disable hypervisor interrupt. */
+	disable_percpu_irq(priv->intr_id);
+
+	napi_schedule(&info->napi);
+
+	return IRQ_HANDLED;
+}
+
+
+/*
+ * One time initialization per interface.
+ */
+static int tile_net_open_aux(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	int ret;
+	int dummy;
+	unsigned int epp_lotar;
+
+	/*
+	 * Find out where EPP memory should be homed.
+	 */
+	ret = hv_dev_pread(priv->hv_devhdl, 0,
+			   (HV_VirtAddr)&epp_lotar, sizeof(epp_lotar),
+			   NETIO_EPP_SHM_OFF);
+	if (ret < 0) {
+		pr_err("could not read epp_shm_queue lotar.\n");
+		return -EIO;
+	}
+
+	/*
+	 * Home the page on the EPP.
+	 */
+	{
+		int epp_home = hv_lotar_to_cpu(epp_lotar);
+		struct page *page = virt_to_page(priv->epp_queue);
+		homecache_change_page_home(page, 0, epp_home);
+	}
+
+	/*
+	 * Register the EPP shared memory queue.
+	 */
+	{
+		netio_ipp_address_t ea = {
+			.va = 0,
+			.pa = __pa(priv->epp_queue),
+			.pte = hv_pte(0),
+			.size = PAGE_SIZE,
+		};
+		ea.pte = hv_pte_set_lotar(ea.pte, epp_lotar);
+		ea.pte = hv_pte_set_mode(ea.pte, HV_PTE_MODE_CACHE_TILE_L3);
+		ret = hv_dev_pwrite(priv->hv_devhdl, 0,
+				    (HV_VirtAddr)&ea,
+				    sizeof(ea),
+				    NETIO_EPP_SHM_OFF);
+		if (ret < 0)
+			return -EIO;
+	}
+
+	/*
+	 * Start LIPP/LEPP.
+	 */
+	if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+			  sizeof(dummy), NETIO_IPP_START_SHIM_OFF) < 0) {
+		pr_warning("Failed to start LIPP/LEPP.\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+
+/*
+ * Register with hypervisor on each CPU.
+ *
+ * Strangely, this function does important things even if it "fails",
+ * which is especially common if the link is not up yet.  Hopefully
+ * these things are all "harmless" if done twice!
+ */
+static void tile_net_register(void *dev_ptr)
+{
+	struct net_device *dev = (struct net_device *)dev_ptr;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info;
+
+	struct tile_netio_queue *queue;
+
+	/* Only network cpus can receive packets. */
+	int queue_id =
+		cpumask_test_cpu(my_cpu, &priv->network_cpus_map) ? 0 : 255;
+
+	netio_input_config_t config = {
+		.flags = 0,
+		.num_receive_packets = priv->network_cpus_credits,
+		.queue_id = queue_id
+	};
+
+	int ret = 0;
+	netio_queue_impl_t *queuep;
+
+	PDEBUG("tile_net_register(queue_id %d)\n", queue_id);
+
+	if (!strcmp(dev->name, "xgbe0"))
+		info = &__get_cpu_var(hv_xgbe0);
+	else if (!strcmp(dev->name, "xgbe1"))
+		info = &__get_cpu_var(hv_xgbe1);
+	else if (!strcmp(dev->name, "gbe0"))
+		info = &__get_cpu_var(hv_gbe0);
+	else if (!strcmp(dev->name, "gbe1"))
+		info = &__get_cpu_var(hv_gbe1);
+	else
+		BUG();
+
+	/* Initialize the egress timer. */
+	init_timer(&info->egress_timer);
+	info->egress_timer.data = (long)info;
+	info->egress_timer.function = tile_net_handle_egress_timer;
+
+	priv->cpu[my_cpu] = info;
+
+	/*
+	 * Register ourselves with the IPP.
+	 */
+	ret = hv_dev_pwrite(priv->hv_devhdl, 0,
+			    (HV_VirtAddr)&config,
+			    sizeof(netio_input_config_t),
+			    NETIO_IPP_INPUT_REGISTER_OFF);
+	PDEBUG("hv_dev_pwrite(NETIO_IPP_INPUT_REGISTER_OFF) returned %d\n",
+	       ret);
+	if (ret < 0) {
+		printk(KERN_DEBUG "hv_dev_pwrite NETIO_IPP_INPUT_REGISTER_OFF"
+		       " failure %d\n", ret);
+		info->link_down = (ret == NETIO_LINK_DOWN);
+		return;
+	}
+
+	/*
+	 * Get the pointer to our queue's system part.
+	 */
+
+	ret = hv_dev_pread(priv->hv_devhdl, 0,
+			   (HV_VirtAddr)&queuep,
+			   sizeof(netio_queue_impl_t *),
+			   NETIO_IPP_INPUT_REGISTER_OFF);
+	PDEBUG("hv_dev_pread(NETIO_IPP_INPUT_REGISTER_OFF) returned %d\n",
+	       ret);
+	PDEBUG("queuep %p\n", queuep);
+	if (ret <= 0) {
+		/* ISSUE: Shouldn't this be a fatal error? */
+		pr_err("hv_dev_pread NETIO_IPP_INPUT_REGISTER_OFF failure\n");
+		return;
+	}
+
+	queue = &info->queue;
+
+	queue->__system_part = queuep;
+
+	memset(&queue->__user_part, 0, sizeof(netio_queue_user_impl_t));
+
+	/* This is traditionally "config.num_receive_packets / 2". */
+	queue->__user_part.__receive_credit_interval = 4;
+	queue->__user_part.__receive_credit_remaining =
+		queue->__user_part.__receive_credit_interval;
+
+	/*
+	 * Get a fastio index from the hypervisor.
+	 * ISSUE: Shouldn't this check the result?
+	 */
+	ret = hv_dev_pread(priv->hv_devhdl, 0,
+			   (HV_VirtAddr)&queue->__user_part.__fastio_index,
+			   sizeof(queue->__user_part.__fastio_index),
+			   NETIO_IPP_GET_FASTIO_OFF);
+	PDEBUG("hv_dev_pread(NETIO_IPP_GET_FASTIO_OFF) returned %d\n", ret);
+
+	netif_napi_add(dev, &info->napi, tile_net_poll, 64);
+
+	/* Now we are registered. */
+	info->registered = true;
+}
+
+
+/*
+ * Unregister with hypervisor on each CPU.
+ */
+static void tile_net_unregister(void *dev_ptr)
+{
+	struct net_device *dev = (struct net_device *)dev_ptr;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+	int ret = 0;
+	int dummy = 0;
+
+	/* Do nothing if never registered. */
+	if (info == NULL)
+		return;
+
+	/* Do nothing if already unregistered. */
+	if (!info->registered)
+		return;
+
+	/*
+	 * Unregister ourselves with LIPP.
+	 */
+	ret = hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+			    sizeof(dummy), NETIO_IPP_INPUT_UNREGISTER_OFF);
+	PDEBUG("hv_dev_pwrite(NETIO_IPP_INPUT_UNREGISTER_OFF) returned %d\n",
+	       ret);
+	if (ret < 0) {
+		/* FIXME: Just panic? */
+		pr_err("hv_dev_pwrite NETIO_IPP_INPUT_UNREGISTER_OFF"
+		       " failure %d\n", ret);
+	}
+
+	/*
+	 * Discard all packets still in our NetIO queue.  Hopefully,
+	 * once the unregister call is complete, there will be no
+	 * packets still in flight on the IDN.
+	 */
+	tile_net_discard_packets(dev);
+
+	/* Reset state. */
+	info->num_needed_small_buffers = 0;
+	info->num_needed_large_buffers = 0;
+
+	/* Cancel egress timer. */
+	del_timer(&info->egress_timer);
+	info->egress_timer_scheduled = false;
+
+	netif_napi_del(&info->napi);
+
+	/* Now we are unregistered. */
+	info->registered = false;
+}
+
+
+/*
+ * Helper function for "tile_net_stop()".
+ *
+ * Also used to handle registration failure in "tile_net_open_inner()",
+ * when "fully_opened" is known to be false, and the various extra
+ * steps in "tile_net_stop()" are not necessary.  ISSUE: It might be
+ * simpler if we could just call "tile_net_stop()" anyway.
+ */
+static void tile_net_stop_aux(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	int dummy = 0;
+
+	/* Unregister all tiles, so LIPP will stop delivering packets. */
+	on_each_cpu(tile_net_unregister, (void *)dev, 1);
+
+	/* Stop LIPP/LEPP. */
+	if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+			  sizeof(dummy), NETIO_IPP_STOP_SHIM_OFF) < 0)
+		panic("Failed to stop LIPP/LEPP!\n");
+
+	priv->partly_opened = 0;
+}
+
+
+/*
+ * Disable ingress interrupts for the given device on the current cpu.
+ */
+static void tile_net_disable_intr(void *dev_ptr)
+{
+	struct net_device *dev = (struct net_device *)dev_ptr;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+	/* Disable hypervisor interrupt. */
+	disable_percpu_irq(priv->intr_id);
+
+	/* Disable NAPI if needed. */
+	if (info != NULL && info->napi_enabled) {
+		napi_disable(&info->napi);
+		info->napi_enabled = false;
+	}
+}
+
+
+/*
+ * Enable ingress interrupts for the given device on the current cpu.
+ */
+static void tile_net_enable_intr(void *dev_ptr)
+{
+	struct net_device *dev = (struct net_device *)dev_ptr;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+	/* Enable hypervisor interrupt. */
+	enable_percpu_irq(priv->intr_id);
+
+	/* Enable NAPI. */
+	napi_enable(&info->napi);
+	info->napi_enabled = true;
+}
+
+
+/*
+ * tile_net_open_inner does most of the work of bringing up the interface.
+ * It's called from tile_net_open(), and also from tile_net_retry_open().
+ * The return value is 0 if the interface was brought up, < 0 if
+ * tile_net_open() should return the return value as an error, and > 0 if
+ * tile_net_open() should return success and schedule a work item to
+ * periodically retry the bringup.
+ */
+static int tile_net_open_inner(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info;
+	struct tile_netio_queue *queue;
+	unsigned int irq;
+	int i;
+
+	/*
+	 * First try to register just on the local CPU, and handle any
+	 * semi-expected "link down" failure specially.  Note that we
+	 * do NOT call "tile_net_stop_aux()", unlike below.
+	 */
+	tile_net_register(dev);
+	info = priv->cpu[my_cpu];
+	if (!info->registered) {
+		if (info->link_down)
+			return 1;
+		return -EAGAIN;
+	}
+
+	/*
+	 * Now register everywhere else.  If any registration fails,
+	 * even for "link down" (which might not be possible), we
+	 * clean up using "tile_net_stop_aux()".
+	 */
+	smp_call_function(tile_net_register, (void *)dev, 1);
+	for_each_online_cpu(i) {
+		if (!priv->cpu[i]->registered) {
+			tile_net_stop_aux(dev);
+			return -EAGAIN;
+		}
+	}
+
+	queue = &info->queue;
+
+	/*
+	 * Set the device intr bit mask.
+	 * The tile_net_register above sets per tile __intr_id.
+	 */
+	priv->intr_id = queue->__system_part->__intr_id;
+	BUG_ON(!priv->intr_id);
+
+	/*
+	 * Register the device interrupt handler.
+	 * The __ffs() function returns the index into the interrupt handler
+	 * table from the interrupt bit mask which should have one bit
+	 * and one bit only set.
+	 */
+	irq = __ffs(priv->intr_id);
+	tile_irq_activate(irq, TILE_IRQ_PERCPU);
+	BUG_ON(request_irq(irq, tile_net_handle_ingress_interrupt,
+			   0, dev->name, (void *)dev) != 0);
+
+	/* ISSUE: How could "priv->fully_opened" ever be "true" here? */
+
+	if (!priv->fully_opened) {
+
+		int dummy = 0;
+
+		/* Allocate initial buffers. */
+
+		int max_buffers =
+			priv->network_cpus_count * priv->network_cpus_credits;
+
+		info->num_needed_small_buffers =
+			min(LIPP_SMALL_BUFFERS, max_buffers);
+
+		info->num_needed_large_buffers =
+			min(LIPP_LARGE_BUFFERS, max_buffers);
+
+		tile_net_provide_needed_buffers(info);
+
+		if (info->num_needed_small_buffers != 0 ||
+		    info->num_needed_large_buffers != 0)
+			panic("Insufficient memory for buffer stack!");
+
+		/* Start LIPP/LEPP and activate "ingress" at the shim. */
+		if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+				  sizeof(dummy), NETIO_IPP_INPUT_INIT_OFF) < 0)
+			panic("Failed to activate the LIPP Shim!\n");
+
+		priv->fully_opened = 1;
+	}
+
+	/* On each tile, enable the hypervisor to trigger interrupts. */
+	/* ISSUE: Do this before starting LIPP/LEPP? */
+	on_each_cpu(tile_net_enable_intr, (void *)dev, 1);
+
+	/* Start our transmit queue. */
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+
+/*
+ * Called periodically to retry bringing up the NetIO interface,
+ * if it doesn't come up cleanly during tile_net_open().
+ */
+static void tile_net_open_retry(struct work_struct *w)
+{
+	struct delayed_work *dw =
+		container_of(w, struct delayed_work, work);
+
+	struct tile_net_priv *priv =
+		container_of(dw, struct tile_net_priv, retry_work);
+
+	/*
+	 * Try to bring the NetIO interface up.  If it fails, reschedule
+	 * ourselves to try again later; otherwise, tell Linux we now have
+	 * a working link.  ISSUE: What if the return value is negative?
+	 */
+	if (tile_net_open_inner(priv->dev))
+		schedule_delayed_work_on(singlethread_cpu, &priv->retry_work,
+					 TILE_NET_RETRY_INTERVAL);
+	else
+		netif_carrier_on(priv->dev);
+}
+
+
+/*
+ * Called when a network interface is made active.
+ *
+ * Returns 0 on success, negative value on failure.
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP).  At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ *
+ * If the actual link is not available yet, then we tell Linux that
+ * we have no carrier, and we keep checking until the link comes up.
+ */
+static int tile_net_open(struct net_device *dev)
+{
+	int ret = 0;
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	/*
+	 * We rely on priv->partly_opened to tell us if this is the
+	 * first time this interface is being brought up. If it is
+	 * set, the IPP was already initialized and should not be
+	 * initialized again.
+	 */
+	if (!priv->partly_opened) {
+
+		int count;
+		int credits;
+
+		/* Initialize LIPP/LEPP, and start the Shim. */
+		ret = tile_net_open_aux(dev);
+		if (ret < 0) {
+			pr_err("tile_net_open_aux failed: %d\n", ret);
+			return ret;
+		}
+
+		/* Analyze the network cpus. */
+
+		if (network_cpus_used)
+			cpumask_copy(&priv->network_cpus_map,
+				     &network_cpus_map);
+		else
+			cpumask_copy(&priv->network_cpus_map, cpu_online_mask);
+
+
+		count = cpumask_weight(&priv->network_cpus_map);
+
+		/* Limit credits to available buffers, and apply min. */
+		credits = max(16, (LIPP_LARGE_BUFFERS / count) & ~1);
+
+		/* Apply "GBE" max limit. */
+		/* ISSUE: Use higher limit for XGBE? */
+		credits = min(NETIO_MAX_RECEIVE_PKTS, credits);
+
+		priv->network_cpus_count = count;
+		priv->network_cpus_credits = credits;
+
+#ifdef TILE_NET_DEBUG
+		pr_info("Using %d network cpus, with %d credits each\n",
+		       priv->network_cpus_count, priv->network_cpus_credits);
+#endif
+
+		priv->partly_opened = 1;
+	}
+
+	/*
+	 * Attempt to bring up the link.
+	 */
+	ret = tile_net_open_inner(dev);
+	if (ret <= 0) {
+		if (ret == 0)
+			netif_carrier_on(dev);
+		return ret;
+	}
+
+	/*
+	 * We were unable to bring up the NetIO interface, but we want to
+	 * try again in a little bit.  Tell Linux that we have no carrier
+	 * so it doesn't try to use the interface before the link comes up
+	 * and then remember to try again later.
+	 */
+	netif_carrier_off(dev);
+	schedule_delayed_work_on(singlethread_cpu, &priv->retry_work,
+				 TILE_NET_RETRY_INTERVAL);
+
+	return 0;
+}
+
+
+/*
+ * Disables a network interface.
+ *
+ * Returns 0, this is not allowed to fail.
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS.  The hardware is still under the drivers control, but
+ * needs to be disabled.  A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ *
+ * ISSUE: Can this can be called while "tile_net_poll()" is running?
+ */
+static int tile_net_stop(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	bool pending = true;
+
+	PDEBUG("tile_net_stop()\n");
+
+	/* ISSUE: Only needed if not yet fully open. */
+	cancel_delayed_work_sync(&priv->retry_work);
+
+	/* Can't transmit any more. */
+	netif_stop_queue(dev);
+
+	/*
+	 * Disable hypervisor interrupts on each tile.
+	 */
+	on_each_cpu(tile_net_disable_intr, (void *)dev, 1);
+
+	/*
+	 * Unregister the interrupt handler.
+	 * The __ffs() function returns the index into the interrupt handler
+	 * table from the interrupt bit mask which should have one bit
+	 * and one bit only set.
+	 */
+	if (priv->intr_id)
+		free_irq(__ffs(priv->intr_id), dev);
+
+	/*
+	 * Drain all the LIPP buffers.
+	 */
+
+	while (true) {
+		int buffer;
+
+		/* NOTE: This should never fail. */
+		if (hv_dev_pread(priv->hv_devhdl, 0, (HV_VirtAddr)&buffer,
+				 sizeof(buffer), NETIO_IPP_DRAIN_OFF) < 0)
+			break;
+
+		/* Stop when done. */
+		if (buffer == 0)
+			break;
+
+		{
+			/* Convert "linux_buffer_t" to "va". */
+			void *va = __va((phys_addr_t)(buffer >> 1) << 7);
+
+			/* Acquire the associated "skb". */
+			struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
+			struct sk_buff *skb = *skb_ptr;
+
+			kfree_skb(skb);
+		}
+	}
+
+	/* Stop LIPP/LEPP. */
+	tile_net_stop_aux(dev);
+
+
+	priv->fully_opened = 0;
+
+
+	/*
+	 * XXX: ISSUE: It appears that, in practice anyway, by the
+	 * time we get here, there are no pending completions.
+	 */
+	while (pending) {
+
+		struct sk_buff *olds[32];
+		unsigned int wanted = 32;
+		unsigned int i, nolds = 0;
+
+		nolds = tile_net_lepp_grab_comps(dev, olds,
+						 wanted, &pending);
+
+		/* ISSUE: We have never actually seen this debug spew. */
+		if (nolds != 0)
+			pr_info("During tile_net_stop(), grabbed %d comps.\n",
+			       nolds);
+
+		for (i = 0; i < nolds; i++)
+			kfree_skb(olds[i]);
+	}
+
+
+	/* Wipe the EPP queue. */
+	memset(priv->epp_queue, 0, sizeof(lepp_queue_t));
+
+	/* Evict the EPP queue. */
+	finv_buffer(priv->epp_queue, PAGE_SIZE);
+
+	return 0;
+}
+
+
+/*
+ * Prepare the "frags" info for the resulting LEPP command.
+ *
+ * If needed, flush the memory used by the frags.
+ */
+static unsigned int tile_net_tx_frags(lepp_frag_t *frags,
+				      struct sk_buff *skb,
+				      void *b_data, unsigned int b_len)
+{
+	unsigned int i, n = 0;
+
+	struct skb_shared_info *sh = skb_shinfo(skb);
+
+	phys_addr_t cpa;
+
+	if (b_len != 0) {
+
+		if (!hash_default)
+			finv_buffer_remote(b_data, b_len);
+
+		cpa = __pa(b_data);
+		frags[n].cpa_lo = cpa;
+		frags[n].cpa_hi = cpa >> 32;
+		frags[n].length = b_len;
+		frags[n].hash_for_home = hash_default;
+		n++;
+	}
+
+	for (i = 0; i < sh->nr_frags; i++) {
+
+		skb_frag_t *f = &sh->frags[i];
+		unsigned long pfn = page_to_pfn(f->page);
+
+		/* FIXME: Compute "hash_for_home" properly. */
+		/* ISSUE: The hypervisor checks CHIP_HAS_REV1_DMA_PACKETS(). */
+		int hash_for_home = hash_default;
+
+		/* FIXME: Hmmm. */
+		if (!hash_default) {
+			void *va = pfn_to_kaddr(pfn) + f->page_offset;
+			BUG_ON(PageHighMem(f->page));
+			finv_buffer_remote(va, f->size);
+		}
+
+		cpa = ((phys_addr_t)pfn << PAGE_SHIFT) + f->page_offset;
+		frags[n].cpa_lo = cpa;
+		frags[n].cpa_hi = cpa >> 32;
+		frags[n].length = f->size;
+		frags[n].hash_for_home = hash_for_home;
+		n++;
+	}
+
+	return n;
+}
+
+
+/*
+ * This function takes "skb", consisting of a header template and a
+ * payload, and hands it to LEPP, to emit as one or more segments,
+ * each consisting of a possibly modified header, plus a piece of the
+ * payload, via a process known as "tcp segmentation offload".
+ *
+ * Usually, "data" will contain the header template, of size "sh_len",
+ * and "sh->frags" will contain "skb->data_len" bytes of payload, and
+ * there will be "sh->gso_segs" segments.
+ *
+ * Sometimes, if "sendfile()" requires copying, we will be called with
+ * "data" containing the header and payload, with "frags" being empty.
+ *
+ * In theory, "sh->nr_frags" could be 3, but in practice, it seems
+ * that this will never actually happen.
+ *
+ * See "emulate_large_send_offload()" for some reference code, which
+ * does not handle checksumming.
+ *
+ * ISSUE: How do we make sure that high memory DMA does not migrate?
+ */
+static int tile_net_tx_tso(struct sk_buff *skb, struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+	struct tile_net_stats_t *stats = &info->stats;
+
+	struct skb_shared_info *sh = skb_shinfo(skb);
+
+	unsigned char *data = skb->data;
+
+	/* The ip header follows the ethernet header. */
+	struct iphdr *ih = ip_hdr(skb);
+	unsigned int ih_len = ih->ihl * 4;
+
+	/* Note that "nh == ih", by definition. */
+	unsigned char *nh = skb_network_header(skb);
+	unsigned int eh_len = nh - data;
+
+	/* The tcp header follows the ip header. */
+	struct tcphdr *th = (struct tcphdr *)(nh + ih_len);
+	unsigned int th_len = th->doff * 4;
+
+	/* The total number of header bytes. */
+	/* NOTE: This may be less than skb_headlen(skb). */
+	unsigned int sh_len = eh_len + ih_len + th_len;
+
+	/* The number of payload bytes at "skb->data + sh_len". */
+	/* This is non-zero for sendfile() without HIGHDMA. */
+	unsigned int b_len = skb_headlen(skb) - sh_len;
+
+	/* The total number of payload bytes. */
+	unsigned int d_len = b_len + skb->data_len;
+
+	/* The maximum payload size. */
+	unsigned int p_len = sh->gso_size;
+
+	/* The total number of segments. */
+	unsigned int num_segs = sh->gso_segs;
+
+	/* The temporary copy of the command. */
+	u32 cmd_body[(LEPP_MAX_CMD_SIZE + 3) / 4];
+	lepp_tso_cmd_t *cmd = (lepp_tso_cmd_t *)cmd_body;
+
+	/* Analyze the "frags". */
+	unsigned int num_frags =
+		tile_net_tx_frags(cmd->frags, skb, data + sh_len, b_len);
+
+	/* The size of the command, including frags and header. */
+	size_t cmd_size = LEPP_TSO_CMD_SIZE(num_frags, sh_len);
+
+	/* The command header. */
+	lepp_tso_cmd_t cmd_init = {
+		.tso = true,
+		.header_size = sh_len,
+		.ip_offset = eh_len,
+		.tcp_offset = eh_len + ih_len,
+		.payload_size = p_len,
+		.num_frags = num_frags,
+	};
+
+	unsigned long irqflags;
+
+	lepp_queue_t *eq = priv->epp_queue;
+
+	struct sk_buff *olds[4];
+	unsigned int wanted = 4;
+	unsigned int i, nolds = 0;
+
+	unsigned int cmd_head, cmd_tail, cmd_next;
+	unsigned int comp_tail;
+
+	unsigned int free_slots;
+
+
+	/* Paranoia. */
+	BUG_ON(skb->protocol != htons(ETH_P_IP));
+	BUG_ON(ih->protocol != IPPROTO_TCP);
+	BUG_ON(skb->ip_summed != CHECKSUM_PARTIAL);
+	BUG_ON(num_frags > LEPP_MAX_FRAGS);
+	/*--BUG_ON(num_segs != (d_len + (p_len - 1)) / p_len); */
+	BUG_ON(num_segs <= 1);
+
+
+	/* Finish preparing the command. */
+
+	/* Copy the command header. */
+	*cmd = cmd_init;
+
+	/* Copy the "header". */
+	memcpy(&cmd->frags[num_frags], data, sh_len);
+
+
+	/* Prefetch and wait, to minimize time spent holding the spinlock. */
+	prefetch_L1(&eq->comp_tail);
+	prefetch_L1(&eq->cmd_tail);
+	mb();
+
+
+	/* Enqueue the command. */
+
+	spin_lock_irqsave(&priv->cmd_lock, irqflags);
+
+	/*
+	 * Handle completions if needed to make room.
+	 * HACK: Spin until there is sufficient room.
+	 */
+	free_slots = lepp_num_free_comp_slots(eq);
+	if (free_slots < 1) {
+spin:
+		nolds += tile_net_lepp_grab_comps(dev, olds + nolds,
+						  wanted - nolds, NULL);
+		if (lepp_num_free_comp_slots(eq) < 1)
+			goto spin;
+	}
+
+	cmd_head = eq->cmd_head;
+	cmd_tail = eq->cmd_tail;
+
+	/* NOTE: The "gotos" below are untested. */
+
+	/* Prepare to advance, detecting full queue. */
+	cmd_next = cmd_tail + cmd_size;
+	if (cmd_tail < cmd_head && cmd_next >= cmd_head)
+		goto spin;
+	if (cmd_next > LEPP_CMD_LIMIT) {
+		cmd_next = 0;
+		if (cmd_next == cmd_head)
+			goto spin;
+	}
+
+	/* Copy the command. */
+	memcpy(&eq->cmds[cmd_tail], cmd, cmd_size);
+
+	/* Advance. */
+	cmd_tail = cmd_next;
+
+	/* Record "skb" for eventual freeing. */
+	comp_tail = eq->comp_tail;
+	eq->comps[comp_tail] = skb;
+	LEPP_QINC(comp_tail);
+	eq->comp_tail = comp_tail;
+
+	/* Flush before allowing LEPP to handle the command. */
+	__insn_mf();
+
+	eq->cmd_tail = cmd_tail;
+
+	spin_unlock_irqrestore(&priv->cmd_lock, irqflags);
+
+	if (nolds == 0)
+		nolds = tile_net_lepp_grab_comps(dev, olds, wanted, NULL);
+
+	/* Handle completions. */
+	for (i = 0; i < nolds; i++)
+		kfree_skb(olds[i]);
+
+	/* Update stats. */
+	stats->tx_packets += num_segs;
+	stats->tx_bytes += (num_segs * sh_len) + d_len;
+
+	/* Make sure the egress timer is scheduled. */
+	tile_net_schedule_egress_timer(info);
+
+	return NETDEV_TX_OK;
+}
+
+
+/*
+ * Transmit a packet (called by the kernel via "hard_start_xmit" hook).
+ */
+static int tile_net_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+	struct tile_net_stats_t *stats = &info->stats;
+
+	unsigned long irqflags;
+
+	struct skb_shared_info *sh = skb_shinfo(skb);
+
+	unsigned int len = skb->len;
+	unsigned char *data = skb->data;
+
+	unsigned int csum_start = skb->csum_start - skb_headroom(skb);
+
+	lepp_frag_t frags[LEPP_MAX_FRAGS];
+
+	unsigned int num_frags;
+
+	lepp_queue_t *eq = priv->epp_queue;
+
+	struct sk_buff *olds[4];
+	unsigned int wanted = 4;
+	unsigned int i, nolds = 0;
+
+	unsigned int cmd_size = sizeof(lepp_cmd_t);
+
+	unsigned int cmd_head, cmd_tail, cmd_next;
+	unsigned int comp_tail;
+
+	lepp_cmd_t cmds[LEPP_MAX_FRAGS];
+
+	unsigned int free_slots;
+
+
+	/*
+	 * This is paranoia, since we think that if the link doesn't come
+	 * up, telling Linux we have no carrier will keep it from trying
+	 * to transmit.  If it does, though, we can't execute this routine,
+	 * since data structures we depend on aren't set up yet.
+	 */
+	if (!info->registered)
+		return NETDEV_TX_BUSY;
+
+
+	/* Save the timestamp. */
+	dev->trans_start = jiffies;
+
+
+#ifdef TILE_NET_PARANOIA
+#if CHIP_HAS_CBOX_HOME_MAP()
+	if (hash_default) {
+		HV_PTE pte = *virt_to_pte(current->mm, (unsigned long)data);
+		if (hv_pte_get_mode(pte) != HV_PTE_MODE_CACHE_HASH_L3)
+			panic("Non-coherent egress buffer!");
+	}
+#endif
+#endif
+
+
+#ifdef TILE_NET_DUMP_PACKETS
+	/* ISSUE: Does not dump the "frags". */
+	dump_packet(data, skb_headlen(skb), "tx");
+#endif /* TILE_NET_DUMP_PACKETS */
+
+
+	if (sh->gso_size != 0)
+		return tile_net_tx_tso(skb, dev);
+
+
+	/* Prepare the commands. */
+
+	num_frags = tile_net_tx_frags(frags, skb, data, skb_headlen(skb));
+
+	for (i = 0; i < num_frags; i++) {
+
+		bool final = (i == num_frags - 1);
+
+		lepp_cmd_t cmd = {
+			.cpa_lo = frags[i].cpa_lo,
+			.cpa_hi = frags[i].cpa_hi,
+			.length = frags[i].length,
+			.hash_for_home = frags[i].hash_for_home,
+			.send_completion = final,
+			.end_of_packet = final
+		};
+
+		if (i == 0 && skb->ip_summed == CHECKSUM_PARTIAL) {
+			cmd.compute_checksum = 1;
+			cmd.checksum_data.bits.start_byte = csum_start;
+			cmd.checksum_data.bits.count = len - csum_start;
+			cmd.checksum_data.bits.destination_byte =
+				csum_start + skb->csum_offset;
+		}
+
+		cmds[i] = cmd;
+	}
+
+
+	/* Prefetch and wait, to minimize time spent holding the spinlock. */
+	prefetch_L1(&eq->comp_tail);
+	prefetch_L1(&eq->cmd_tail);
+	mb();
+
+
+	/* Enqueue the commands. */
+
+	spin_lock_irqsave(&priv->cmd_lock, irqflags);
+
+	/*
+	 * Handle completions if needed to make room.
+	 * HACK: Spin until there is sufficient room.
+	 */
+	free_slots = lepp_num_free_comp_slots(eq);
+	if (free_slots < 1) {
+spin:
+		nolds += tile_net_lepp_grab_comps(dev, olds + nolds,
+						  wanted - nolds, NULL);
+		if (lepp_num_free_comp_slots(eq) < 1)
+			goto spin;
+	}
+
+	cmd_head = eq->cmd_head;
+	cmd_tail = eq->cmd_tail;
+
+	/* NOTE: The "gotos" below are untested. */
+
+	/* Copy the commands, or fail. */
+	for (i = 0; i < num_frags; i++) {
+
+		/* Prepare to advance, detecting full queue. */
+		cmd_next = cmd_tail + cmd_size;
+		if (cmd_tail < cmd_head && cmd_next >= cmd_head)
+			goto spin;
+		if (cmd_next > LEPP_CMD_LIMIT) {
+			cmd_next = 0;
+			if (cmd_next == cmd_head)
+				goto spin;
+		}
+
+		/* Copy the command. */
+		*(lepp_cmd_t *)&eq->cmds[cmd_tail] = cmds[i];
+
+		/* Advance. */
+		cmd_tail = cmd_next;
+	}
+
+	/* Record "skb" for eventual freeing. */
+	comp_tail = eq->comp_tail;
+	eq->comps[comp_tail] = skb;
+	LEPP_QINC(comp_tail);
+	eq->comp_tail = comp_tail;
+
+	/* Flush before allowing LEPP to handle the command. */
+	__insn_mf();
+
+	eq->cmd_tail = cmd_tail;
+
+	spin_unlock_irqrestore(&priv->cmd_lock, irqflags);
+
+	if (nolds == 0)
+		nolds = tile_net_lepp_grab_comps(dev, olds, wanted, NULL);
+
+	/* Handle completions. */
+	for (i = 0; i < nolds; i++)
+		kfree_skb(olds[i]);
+
+	/* HACK: Track "expanded" size for short packets (e.g. 42 < 60). */
+	stats->tx_packets++;
+	stats->tx_bytes += ((len >= ETH_ZLEN) ? len : ETH_ZLEN);
+
+	/* Make sure the egress timer is scheduled. */
+	tile_net_schedule_egress_timer(info);
+
+	return NETDEV_TX_OK;
+}
+
+
+/*
+ * Deal with a transmit timeout.
+ */
+static void tile_net_tx_timeout(struct net_device *dev)
+{
+	PDEBUG("tile_net_tx_timeout()\n");
+	PDEBUG("Transmit timeout at %ld, latency %ld\n", jiffies,
+	       jiffies - dev->trans_start);
+
+	/* XXX: ISSUE: This doesn't seem useful for us. */
+	netif_wake_queue(dev);
+}
+
+
+/*
+ * Ioctl commands.
+ */
+static int tile_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	return -EOPNOTSUPP;
+}
+
+
+/*
+ * Get System Network Statistics.
+ *
+ * Returns the address of the device statistics structure.
+ */
+static struct net_device_stats *tile_net_get_stats(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	u32 rx_packets = 0;
+	u32 tx_packets = 0;
+	u32 rx_bytes = 0;
+	u32 tx_bytes = 0;
+	int i;
+
+	for_each_online_cpu(i) {
+		if (priv->cpu[i]) {
+			rx_packets += priv->cpu[i]->stats.rx_packets;
+			rx_bytes += priv->cpu[i]->stats.rx_bytes;
+			tx_packets += priv->cpu[i]->stats.tx_packets;
+			tx_bytes += priv->cpu[i]->stats.tx_bytes;
+		}
+	}
+
+	priv->stats.rx_packets = rx_packets;
+	priv->stats.rx_bytes = rx_bytes;
+	priv->stats.tx_packets = tx_packets;
+	priv->stats.tx_bytes = tx_bytes;
+
+	return &priv->stats;
+}
+
+
+/*
+ * Change the "mtu".
+ *
+ * The "change_mtu" method is usually not needed.
+ * If you need it, it must be like this.
+ */
+static int tile_net_change_mtu(struct net_device *dev, int new_mtu)
+{
+	PDEBUG("tile_net_change_mtu()\n");
+
+	/* Check ranges. */
+	if ((new_mtu < 68) || (new_mtu > 1500))
+		return -EINVAL;
+
+	/* Accept the value. */
+	dev->mtu = new_mtu;
+
+	return 0;
+}
+
+
+/*
+ * Change the Ethernet Address of the NIC.
+ *
+ * The hypervisor driver does not support changing MAC address.  However,
+ * the IPP does not do anything with the MAC address, so the address which
+ * gets used on outgoing packets, and which is accepted on incoming packets,
+ * is completely up to the NetIO program or kernel driver which is actually
+ * handling them.
+ *
+ * Returns 0 on success, negative on failure.
+ */
+static int tile_net_set_mac_address(struct net_device *dev, void *p)
+{
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+
+	/* ISSUE: Note that "dev_addr" is now a pointer. */
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+	return 0;
+}
+
+
+/*
+ * Obtain the MAC address from the hypervisor.
+ * This must be done before opening the device.
+ */
+static int tile_net_get_mac(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	char hv_dev_name[32];
+	int len;
+
+	__netio_getset_offset_t offset = { .word = NETIO_IPP_PARAM_OFF };
+
+	int ret;
+
+	/* For example, "xgbe0". */
+	strcpy(hv_dev_name, dev->name);
+	len = strlen(hv_dev_name);
+
+	/* For example, "xgbe/0". */
+	hv_dev_name[len] = hv_dev_name[len - 1];
+	hv_dev_name[len - 1] = '/';
+	len++;
+
+	/* For example, "xgbe/0/native_hash". */
+	strcpy(hv_dev_name + len, hash_default ? "/native_hash" : "/native");
+
+	/* Get the hypervisor handle for this device. */
+	priv->hv_devhdl = hv_dev_open((HV_VirtAddr)hv_dev_name, 0);
+	PDEBUG("hv_dev_open(%s) returned %d %p\n",
+	       hv_dev_name, priv->hv_devhdl, &priv->hv_devhdl);
+	if (priv->hv_devhdl < 0) {
+		if (priv->hv_devhdl == HV_ENODEV)
+			printk(KERN_DEBUG "Ignoring unconfigured device %s\n",
+				 hv_dev_name);
+		else
+			printk(KERN_DEBUG "hv_dev_open(%s) returned %d\n",
+				 hv_dev_name, priv->hv_devhdl);
+		return -1;
+	}
+
+	/*
+	 * Read the hardware address from the hypervisor.
+	 * ISSUE: Note that "dev_addr" is now a pointer.
+	 */
+	offset.bits.class = NETIO_PARAM;
+	offset.bits.addr = NETIO_PARAM_MAC;
+	ret = hv_dev_pread(priv->hv_devhdl, 0,
+			   (HV_VirtAddr)dev->dev_addr, dev->addr_len,
+			   offset.word);
+	PDEBUG("hv_dev_pread(NETIO_PARAM_MAC) returned %d\n", ret);
+	if (ret <= 0) {
+		printk(KERN_DEBUG "hv_dev_pread(NETIO_PARAM_MAC) %s failed\n",
+		       dev->name);
+		/*
+		 * Since the device is configured by the hypervisor but we
+		 * can't get its MAC address, we are most likely running
+		 * the simulator, so let's generate a random MAC address.
+		 */
+		random_ether_addr(dev->dev_addr);
+	}
+
+	return 0;
+}
+
+
+static struct net_device_ops tile_net_ops = {
+	.ndo_open = tile_net_open,
+	.ndo_stop = tile_net_stop,
+	.ndo_start_xmit = tile_net_tx,
+	.ndo_do_ioctl = tile_net_ioctl,
+	.ndo_get_stats = tile_net_get_stats,
+	.ndo_change_mtu = tile_net_change_mtu,
+	.ndo_tx_timeout = tile_net_tx_timeout,
+	.ndo_set_mac_address = tile_net_set_mac_address
+};
+
+
+/*
+ * The setup function.
+ *
+ * This uses ether_setup() to assign various fields in dev, including
+ * setting IFF_BROADCAST and IFF_MULTICAST, then sets some extra fields.
+ */
+static void tile_net_setup(struct net_device *dev)
+{
+	PDEBUG("tile_net_setup()\n");
+
+	ether_setup(dev);
+
+	dev->netdev_ops = &tile_net_ops;
+
+	dev->watchdog_timeo = TILE_NET_TIMEOUT;
+
+	/* We want lockless xmit. */
+	dev->features |= NETIF_F_LLTX;
+
+	/* We support hardware tx checksums. */
+	dev->features |= NETIF_F_HW_CSUM;
+
+	/* We support scatter/gather. */
+	dev->features |= NETIF_F_SG;
+
+	/* We support TSO. */
+	dev->features |= NETIF_F_TSO;
+
+#ifdef TILE_NET_GSO
+	/* We support GSO. */
+	dev->features |= NETIF_F_GSO;
+#endif
+
+	if (hash_default)
+		dev->features |= NETIF_F_HIGHDMA;
+
+	/* ISSUE: We should support NETIF_F_UFO. */
+
+	dev->tx_queue_len = TILE_NET_TX_QUEUE_LEN;
+
+	dev->mtu = TILE_NET_MTU;
+}
+
+
+/*
+ * Allocate the device structure, register the device, and obtain the
+ * MAC address from the hypervisor.
+ */
+static struct net_device *tile_net_dev_init(const char *name)
+{
+	int ret;
+	struct net_device *dev;
+	struct tile_net_priv *priv;
+	struct page *page;
+
+	/*
+	 * Allocate the device structure.  This allocates "priv", calls
+	 * tile_net_setup(), and saves "name".  Normally, "name" is a
+	 * template, instantiated by register_netdev(), but not for us.
+	 */
+	dev = alloc_netdev(sizeof(*priv), name, tile_net_setup);
+	if (!dev) {
+		pr_err("alloc_netdev(%s) failed\n", name);
+		return NULL;
+	}
+
+	priv = netdev_priv(dev);
+
+	/* Initialize "priv". */
+
+	memset(priv, 0, sizeof(*priv));
+
+	/* Save "dev" for "tile_net_open_retry()". */
+	priv->dev = dev;
+
+	INIT_DELAYED_WORK(&priv->retry_work, tile_net_open_retry);
+
+	spin_lock_init(&priv->cmd_lock);
+	spin_lock_init(&priv->comp_lock);
+
+	/* Allocate "epp_queue". */
+	BUG_ON(get_order(sizeof(lepp_queue_t)) != 0);
+	page = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0);
+	if (!page) {
+		free_netdev(dev);
+		return NULL;
+	}
+	priv->epp_queue = page_address(page);
+
+	/* Register the network device. */
+	ret = register_netdev(dev);
+	if (ret) {
+		pr_err("register_netdev %s failed %d\n", dev->name, ret);
+		free_page((unsigned long)priv->epp_queue);
+		free_netdev(dev);
+		return NULL;
+	}
+
+	/* Get the MAC address. */
+	ret = tile_net_get_mac(dev);
+	if (ret < 0) {
+		unregister_netdev(dev);
+		free_page((unsigned long)priv->epp_queue);
+		free_netdev(dev);
+		return NULL;
+	}
+
+	return dev;
+}
+
+
+/*
+ * Module cleanup.
+ */
+static void tile_net_cleanup(void)
+{
+	int i;
+
+	for (i = 0; i < TILE_NET_DEVS; i++) {
+		if (tile_net_devs[i]) {
+			struct net_device *dev = tile_net_devs[i];
+			struct tile_net_priv *priv = netdev_priv(dev);
+			unregister_netdev(dev);
+			finv_buffer(priv->epp_queue, PAGE_SIZE);
+			free_page((unsigned long)priv->epp_queue);
+			free_netdev(dev);
+		}
+	}
+}
+
+
+/*
+ * Module initialization.
+ */
+static int tile_net_init_module(void)
+{
+	pr_info("Tilera IPP Net Driver\n");
+
+	tile_net_devs[0] = tile_net_dev_init("xgbe0");
+	tile_net_devs[1] = tile_net_dev_init("xgbe1");
+	tile_net_devs[2] = tile_net_dev_init("gbe0");
+	tile_net_devs[3] = tile_net_dev_init("gbe1");
+
+	return 0;
+}
+
+
+#ifndef MODULE
+/*
+ * The "network_cpus" boot argument specifies the cpus that are dedicated
+ * to handle ingress packets.
+ *
+ * The parameter should be in the form "network_cpus=m-n[,x-y]", where
+ * m, n, x, y are integer numbers that represent the cpus that can be
+ * neither a dedicated cpu nor a dataplane cpu.
+ */
+static int __init network_cpus_setup(char *str)
+{
+	int rc = cpulist_parse_crop(str, &network_cpus_map);
+	if (rc != 0) {
+		pr_warning("network_cpus=%s: malformed cpu list\n",
+		       str);
+	} else {
+
+		/* Remove dedicated cpus. */
+		cpumask_and(&network_cpus_map, &network_cpus_map,
+			    cpu_possible_mask);
+
+
+		if (cpumask_empty(&network_cpus_map)) {
+			pr_warning("Ignoring network_cpus='%s'.\n",
+			       str);
+		} else {
+			char buf[1024];
+			cpulist_scnprintf(buf, sizeof(buf), &network_cpus_map);
+			pr_info("Linux network CPUs: %s\n", buf);
+			network_cpus_used = true;
+		}
+	}
+
+	return 0;
+}
+__setup("network_cpus=", network_cpus_setup);
+#endif
+
+
+module_init(tile_net_init_module);
+module_exit(tile_net_cleanup);

From f02cbbe657939489347cbda598401a56913ffcbd Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Tue, 2 Nov 2010 12:05:10 -0400
Subject: [PATCH 0927/1066] pci root complex: support for tile architecture

This change enables PCI root complex support for TILEPro.  Unlike
TILE-Gx, TILEPro has no support for memory-mapped I/O, so the PCI
support consists of hypervisor upcalls for PIO, DMA, etc.  However,
the performance is fine for the devices we have tested with so far
(1Gb Ethernet, SATA, etc.).

The <asm/io.h> header was tweaked to be a little bit more aggressive
about disabling attempts to map/unmap IO port space.  The hacky
<asm/pci-bridge.h> header was rolled into the <asm/pci.h> header
and the result was simplified.  Both of the latter two headers were
preliminary versions not meant for release before now - oh well.

There is one quirk for our TILEmpower platform, which accidentally
negotiates up to 5GT and needs to be kicked down to 2.5GT.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 arch/tile/Kconfig                  |  12 +
 arch/tile/include/asm/io.h         |  15 +-
 arch/tile/include/asm/pci-bridge.h | 117 ------
 arch/tile/include/asm/pci.h        | 107 ++---
 arch/tile/kernel/Makefile          |   1 +
 arch/tile/kernel/pci.c             | 621 +++++++++++++++++++++++++++++
 drivers/pci/Makefile               |   1 +
 drivers/pci/quirks.c               |  18 +
 8 files changed, 705 insertions(+), 187 deletions(-)
 delete mode 100644 arch/tile/include/asm/pci-bridge.h
 create mode 100644 arch/tile/kernel/pci.c

diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 07ec8a865c1d..e11b5fcb70eb 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -329,6 +329,18 @@ endmenu  # Tilera-specific configuration
 
 menu "Bus options"
 
+config PCI
+	bool "PCI support"
+	default y
+	select PCI_DOMAINS
+	---help---
+	  Enable PCI root complex support, so PCIe endpoint devices can
+	  be attached to the Tile chip.  Many, but not all, PCI devices
+	  are supported under Tilera's root complex driver.
+
+config PCI_DOMAINS
+	bool
+
 config NO_IOMEM
 	def_bool !PCI
 
diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h
index ee43328713ab..d3cbb9b14cbe 100644
--- a/arch/tile/include/asm/io.h
+++ b/arch/tile/include/asm/io.h
@@ -55,9 +55,6 @@ extern void iounmap(volatile void __iomem *addr);
 #define ioremap_writethrough(physaddr, size)	ioremap(physaddr, size)
 #define ioremap_fullcache(physaddr, size)	ioremap(physaddr, size)
 
-void __iomem *ioport_map(unsigned long port, unsigned int len);
-extern inline void ioport_unmap(void __iomem *addr) {}
-
 #define mmiowb()
 
 /* Conversion between virtual and physical mappings.  */
@@ -189,12 +186,22 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
  * we never run, uses them unconditionally.
  */
 
-static inline int ioport_panic(void)
+static inline long ioport_panic(void)
 {
 	panic("inb/outb and friends do not exist on tile");
 	return 0;
 }
 
+static inline void __iomem *ioport_map(unsigned long port, unsigned int len)
+{
+	return (void __iomem *) ioport_panic();
+}
+
+static inline void ioport_unmap(void __iomem *addr)
+{
+	ioport_panic();
+}
+
 static inline u8 inb(unsigned long addr)
 {
 	return ioport_panic();
diff --git a/arch/tile/include/asm/pci-bridge.h b/arch/tile/include/asm/pci-bridge.h
deleted file mode 100644
index e853b0e2793b..000000000000
--- a/arch/tile/include/asm/pci-bridge.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License
- *   as published by the Free Software Foundation, version 2.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *   NON INFRINGEMENT.  See the GNU General Public License for
- *   more details.
- */
-
-#ifndef _ASM_TILE_PCI_BRIDGE_H
-#define _ASM_TILE_PCI_BRIDGE_H
-
-#include <linux/ioport.h>
-#include <linux/pci.h>
-
-struct device_node;
-struct pci_controller;
-
-/*
- * pci_io_base returns the memory address at which you can access
- * the I/O space for PCI bus number `bus' (or NULL on error).
- */
-extern void __iomem *pci_bus_io_base(unsigned int bus);
-extern unsigned long pci_bus_io_base_phys(unsigned int bus);
-extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
-
-/* Allocate a new PCI host bridge structure */
-extern struct pci_controller *pcibios_alloc_controller(void);
-
-/* Helper function for setting up resources */
-extern void pci_init_resource(struct resource *res, unsigned long start,
-			      unsigned long end, int flags, char *name);
-
-/* Get the PCI host controller for a bus */
-extern struct pci_controller *pci_bus_to_hose(int bus);
-
-/*
- * Structure of a PCI controller (host bridge)
- */
-struct pci_controller {
-	int index;		/* PCI domain number */
-	struct pci_bus *root_bus;
-
-	int first_busno;
-	int last_busno;
-
-	int hv_cfg_fd[2];	/* config{0,1} fds for this PCIe controller */
-	int hv_mem_fd;		/* fd to Hypervisor for MMIO operations */
-
-	struct pci_ops *ops;
-
-	int irq_base;		/* Base IRQ from the Hypervisor	*/
-	int plx_gen1;		/* flag for PLX Gen 1 configuration */
-
-	/* Address ranges that are routed to this controller/bridge. */
-	struct resource mem_resources[3];
-};
-
-static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
-{
-	return bus->sysdata;
-}
-
-extern void setup_indirect_pci_nomap(struct pci_controller *hose,
-			       void __iomem *cfg_addr, void __iomem *cfg_data);
-extern void setup_indirect_pci(struct pci_controller *hose,
-			       u32 cfg_addr, u32 cfg_data);
-extern void setup_grackle(struct pci_controller *hose);
-
-extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
-
-/*
- *   The following code swizzles for exactly one bridge.  The routine
- *   common_swizzle below handles multiple bridges.  But there are a
- *   some boards that don't follow the PCI spec's suggestion so we
- *   break this piece out separately.
- */
-static inline unsigned char bridge_swizzle(unsigned char pin,
-		unsigned char idsel)
-{
-	return (((pin-1) + idsel) % 4) + 1;
-}
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those PPC systems that do not already have PCI
- * interrupts properly routed.
- */
-/* FIXME - double check this */
-#define PCI_IRQ_TABLE_LOOKUP ({ \
-	long _ctl_ = -1; \
-	if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \
-		_ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \
-	_ctl_; \
-})
-
-/*
- * Scan the buses below a given PCI host bridge and assign suitable
- * resources to all devices found.
- */
-extern int pciauto_bus_scan(struct pci_controller *, int);
-
-#ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
-#else
-static inline unsigned long pci_address_to_pio(phys_addr_t address)
-{
-	return (unsigned long)-1;
-}
-#endif
-
-#endif /* _ASM_TILE_PCI_BRIDGE_H */
diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h
index b0c15da2d5d5..c3fc458a0d32 100644
--- a/arch/tile/include/asm/pci.h
+++ b/arch/tile/include/asm/pci.h
@@ -15,7 +15,29 @@
 #ifndef _ASM_TILE_PCI_H
 #define _ASM_TILE_PCI_H
 
-#include <asm/pci-bridge.h>
+#include <linux/pci.h>
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+	int index;		/* PCI domain number */
+	struct pci_bus *root_bus;
+
+	int first_busno;
+	int last_busno;
+
+	int hv_cfg_fd[2];	/* config{0,1} fds for this PCIe controller */
+	int hv_mem_fd;		/* fd to Hypervisor for MMIO operations */
+
+	struct pci_ops *ops;
+
+	int irq_base;		/* Base IRQ from the Hypervisor	*/
+	int plx_gen1;		/* flag for PLX Gen 1 configuration */
+
+	/* Address ranges that are routed to this controller/bridge. */
+	struct resource mem_resources[3];
+};
 
 /*
  * The hypervisor maps the entirety of CPA-space as bus addresses, so
@@ -24,57 +46,13 @@
  */
 #define PCI_DMA_BUS_IS_PHYS     1
 
-struct pci_controller *pci_bus_to_hose(int bus);
-unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp);
 int __init tile_pci_init(void);
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
+
 void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
+
 void __devinit pcibios_fixup_bus(struct pci_bus *bus);
 
-int __devinit _tile_cfg_read(struct pci_controller *hose,
-				    int bus,
-				    int slot,
-				    int function,
-				    int offset,
-				    int size,
-				    u32 *val);
-int __devinit _tile_cfg_write(struct pci_controller *hose,
-				     int bus,
-				     int slot,
-				     int function,
-				     int offset,
-				     int size,
-				     u32 val);
-
-/*
- * These are used to to config reads and writes in the early stages of
- * setup before the driver infrastructure has been set up enough to be
- * able to do config reads and writes.
- */
-#define early_cfg_read(where, size, value) \
-	_tile_cfg_read(controller, \
-		       current_bus, \
-		       pci_slot, \
-		       pci_fn, \
-		       where, \
-		       size, \
-		       value)
-
-#define early_cfg_write(where, size, value) \
-	_tile_cfg_write(controller, \
-		       current_bus, \
-		       pci_slot, \
-		       pci_fn, \
-		       where, \
-		       size, \
-		       value)
-
-
-
-#define PCICFG_BYTE	1
-#define PCICFG_WORD	2
-#define PCICFG_DWORD	4
-
 #define	TILE_NUM_PCIE	2
 
 #define pci_domain_nr(bus) (((struct pci_controller *)(bus)->sysdata)->index)
@@ -88,33 +66,33 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 }
 
 /*
- * I/O space is currently not supported.
+ * pcibios_assign_all_busses() tells whether or not the bus numbers
+ * should be reassigned, in case the BIOS didn't do it correctly, or
+ * in case we don't have a BIOS and we want to let Linux do it.
  */
+static inline int pcibios_assign_all_busses(void)
+{
+	return 1;
+}
 
-#define TILE_PCIE_LOWER_IO		0x0
-#define TILE_PCIE_UPPER_IO		0x10000
-#define TILE_PCIE_PCIE_IO_SIZE		0x0000FFFF
-
-#define _PAGE_NO_CACHE		0
-#define _PAGE_GUARDED		0
-
-
-#define pcibios_assign_all_busses()    pci_assign_all_buses
-extern int pci_assign_all_buses;
-
+/*
+ * No special bus mastering setup handling.
+ */
 static inline void pcibios_set_master(struct pci_dev *dev)
 {
-	/* No special bus mastering setup handling */
 }
 
 #define PCIBIOS_MIN_MEM		0
-#define PCIBIOS_MIN_IO		TILE_PCIE_LOWER_IO
+#define PCIBIOS_MIN_IO		0
 
 /*
  * This flag tells if the platform is TILEmpower that needs
  * special configuration for the PLX switch chip.
  */
-extern int blade_pci;
+extern int tile_plx_gen1;
+
+/* Use any cpu for PCI. */
+#define cpumask_of_pcibus(bus) cpu_online_mask
 
 /* implement the pci_ DMA API in terms of the generic device dma_ one */
 #include <asm-generic/pci-dma-compat.h>
@@ -122,7 +100,4 @@ extern int blade_pci;
 /* generic pci stuff */
 #include <asm-generic/pci.h>
 
-/* Use any cpu for PCI. */
-#define cpumask_of_pcibus(bus) cpu_online_mask
-
 #endif /* _ASM_TILE_PCI_H */
diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile
index 112b1e248f05..b4c8e8ec45dc 100644
--- a/arch/tile/kernel/Makefile
+++ b/arch/tile/kernel/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_SMP)		+= smpboot.o smp.o tlb.o
 obj-$(CONFIG_MODULES)		+= module.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_PCI)		+= pci.o
diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
new file mode 100644
index 000000000000..a1ee25be9ad9
--- /dev/null
+++ b/arch/tile/kernel/pci.c
@@ -0,0 +1,621 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/capability.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <asm/processor.h>
+#include <asm/sections.h>
+#include <asm/byteorder.h>
+#include <asm/hv_driver.h>
+#include <hv/drv_pcie_rc_intf.h>
+
+
+/*
+ * Initialization flow and process
+ * -------------------------------
+ *
+ * This files containes the routines to search for PCI buses,
+ * enumerate the buses, and configure any attached devices.
+ *
+ * There are two entry points here:
+ * 1) tile_pci_init
+ *    This sets up the pci_controller structs, and opens the
+ *    FDs to the hypervisor.  This is called from setup_arch() early
+ *    in the boot process.
+ * 2) pcibios_init
+ *    This probes the PCI bus(es) for any attached hardware.  It's
+ *    called by subsys_initcall.  All of the real work is done by the
+ *    generic Linux PCI layer.
+ *
+ */
+
+/*
+ * This flag tells if the platform is TILEmpower that needs
+ * special configuration for the PLX switch chip.
+ */
+int __write_once tile_plx_gen1;
+
+static struct pci_controller controllers[TILE_NUM_PCIE];
+static int num_controllers;
+
+static struct pci_ops tile_cfg_ops;
+
+
+/*
+ * We don't need to worry about the alignment of resources.
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+			    resource_size_t size, resource_size_t align)
+{
+	return res->start;
+}
+EXPORT_SYMBOL(pcibios_align_resource);
+
+/*
+ * Open a FD to the hypervisor PCI device.
+ *
+ * controller_id is the controller number, config type is 0 or 1 for
+ * config0 or config1 operations.
+ */
+static int __init tile_pcie_open(int controller_id, int config_type)
+{
+	char filename[32];
+	int fd;
+
+	sprintf(filename, "pcie/%d/config%d", controller_id, config_type);
+
+	fd = hv_dev_open((HV_VirtAddr)filename, 0);
+
+	return fd;
+}
+
+
+/*
+ * Get the IRQ numbers from the HV and set up the handlers for them.
+ */
+static int __init tile_init_irqs(int controller_id,
+				 struct pci_controller *controller)
+{
+	char filename[32];
+	int fd;
+	int ret;
+	int x;
+	struct pcie_rc_config rc_config;
+
+	sprintf(filename, "pcie/%d/ctl", controller_id);
+	fd = hv_dev_open((HV_VirtAddr)filename, 0);
+	if (fd < 0) {
+		pr_err("PCI: hv_dev_open(%s) failed\n", filename);
+		return -1;
+	}
+	ret = hv_dev_pread(fd, 0, (HV_VirtAddr)(&rc_config),
+			   sizeof(rc_config), PCIE_RC_CONFIG_MASK_OFF);
+	hv_dev_close(fd);
+	if (ret != sizeof(rc_config)) {
+		pr_err("PCI: wanted %zd bytes, got %d\n",
+		       sizeof(rc_config), ret);
+		return -1;
+	}
+	/* Record irq_base so that we can map INTx to IRQ # later. */
+	controller->irq_base = rc_config.intr;
+
+	for (x = 0; x < 4; x++)
+		tile_irq_activate(rc_config.intr + x,
+				  TILE_IRQ_HW_CLEAR);
+
+	if (rc_config.plx_gen1)
+		controller->plx_gen1 = 1;
+
+	return 0;
+}
+
+/*
+ * First initialization entry point, called from setup_arch().
+ *
+ * Find valid controllers and fill in pci_controller structs for each
+ * of them.
+ *
+ * Returns the number of controllers discovered.
+ */
+int __init tile_pci_init(void)
+{
+	int i;
+
+	pr_info("PCI: Searching for controllers...\n");
+
+	/* Do any configuration we need before using the PCIe */
+
+	for (i = 0; i < TILE_NUM_PCIE; i++) {
+		int hv_cfg_fd0 = -1;
+		int hv_cfg_fd1 = -1;
+		int hv_mem_fd = -1;
+		char name[32];
+		struct pci_controller *controller;
+
+		/*
+		 * Open the fd to the HV.  If it fails then this
+		 * device doesn't exist.
+		 */
+		hv_cfg_fd0 = tile_pcie_open(i, 0);
+		if (hv_cfg_fd0 < 0)
+			continue;
+		hv_cfg_fd1 = tile_pcie_open(i, 1);
+		if (hv_cfg_fd1 < 0) {
+			pr_err("PCI: Couldn't open config fd to HV "
+			    "for controller %d\n", i);
+			goto err_cont;
+		}
+
+		sprintf(name, "pcie/%d/mem", i);
+		hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0);
+		if (hv_mem_fd < 0) {
+			pr_err("PCI: Could not open mem fd to HV!\n");
+			goto err_cont;
+		}
+
+		pr_info("PCI: Found PCI controller #%d\n", i);
+
+		controller = &controllers[num_controllers];
+
+		if (tile_init_irqs(i, controller)) {
+			pr_err("PCI: Could not initialize "
+			       "IRQs, aborting.\n");
+			goto err_cont;
+		}
+
+		controller->index = num_controllers;
+		controller->hv_cfg_fd[0] = hv_cfg_fd0;
+		controller->hv_cfg_fd[1] = hv_cfg_fd1;
+		controller->hv_mem_fd = hv_mem_fd;
+		controller->first_busno = 0;
+		controller->last_busno = 0xff;
+		controller->ops = &tile_cfg_ops;
+
+		num_controllers++;
+		continue;
+
+err_cont:
+		if (hv_cfg_fd0 >= 0)
+			hv_dev_close(hv_cfg_fd0);
+		if (hv_cfg_fd1 >= 0)
+			hv_dev_close(hv_cfg_fd1);
+		if (hv_mem_fd >= 0)
+			hv_dev_close(hv_mem_fd);
+		continue;
+	}
+
+	/*
+	 * Before using the PCIe, see if we need to do any platform-specific
+	 * configuration, such as the PLX switch Gen 1 issue on TILEmpower.
+	 */
+	for (i = 0; i < num_controllers; i++) {
+		struct pci_controller *controller = &controllers[i];
+
+		if (controller->plx_gen1)
+			tile_plx_gen1 = 1;
+	}
+
+	return num_controllers;
+}
+
+/*
+ * (pin - 1) converts from the PCI standard's [1:4] convention to
+ * a normal [0:3] range.
+ */
+static int tile_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct pci_controller *controller =
+		(struct pci_controller *)dev->sysdata;
+	return (pin - 1) + controller->irq_base;
+}
+
+
+static void __init fixup_read_and_payload_sizes(void)
+{
+	struct pci_dev *dev = NULL;
+	int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */
+	int max_read_size = 0x2; /* Limit to 512 byte reads. */
+	u16 new_values;
+
+	/* Scan for the smallest maximum payload size. */
+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		int pcie_caps_offset;
+		u32 devcap;
+		int max_payload;
+
+		pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
+		if (pcie_caps_offset == 0)
+			continue;
+
+		pci_read_config_dword(dev, pcie_caps_offset + PCI_EXP_DEVCAP,
+				      &devcap);
+		max_payload = devcap & PCI_EXP_DEVCAP_PAYLOAD;
+		if (max_payload < smallest_max_payload)
+			smallest_max_payload = max_payload;
+	}
+
+	/* Now, set the max_payload_size for all devices to that value. */
+	new_values = (max_read_size << 12) | (smallest_max_payload << 5);
+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		int pcie_caps_offset;
+		u16 devctl;
+
+		pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
+		if (pcie_caps_offset == 0)
+			continue;
+
+		pci_read_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
+				     &devctl);
+		devctl &= ~(PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ);
+		devctl |= new_values;
+		pci_write_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
+				      devctl);
+	}
+}
+
+
+/*
+ * Second PCI initialization entry point, called by subsys_initcall.
+ *
+ * The controllers have been set up by the time we get here, by a call to
+ * tile_pci_init.
+ */
+static int __init pcibios_init(void)
+{
+	int i;
+
+	pr_info("PCI: Probing PCI hardware\n");
+
+	/*
+	 * Delay a bit in case devices aren't ready.  Some devices are
+	 * known to require at least 20ms here, but we use a more
+	 * conservative value.
+	 */
+	mdelay(250);
+
+	/* Scan all of the recorded PCI controllers.  */
+	for (i = 0; i < num_controllers; i++) {
+		struct pci_controller *controller = &controllers[i];
+		struct pci_bus *bus;
+
+		pr_info("PCI: initializing controller #%d\n", i);
+
+		/*
+		 * This comes from the generic Linux PCI driver.
+		 *
+		 * It reads the PCI tree for this bus into the Linux
+		 * data structures.
+		 *
+		 * This is inlined in linux/pci.h and calls into
+		 * pci_scan_bus_parented() in probe.c.
+		 */
+		bus = pci_scan_bus(0, controller->ops, controller);
+		controller->root_bus = bus;
+		controller->last_busno = bus->subordinate;
+
+	}
+
+	/* Do machine dependent PCI interrupt routing */
+	pci_fixup_irqs(pci_common_swizzle, tile_map_irq);
+
+	/*
+	 * This comes from the generic Linux PCI driver.
+	 *
+	 * It allocates all of the resources (I/O memory, etc)
+	 * associated with the devices read in above.
+	 */
+
+	pci_assign_unassigned_resources();
+
+	/* Configure the max_read_size and max_payload_size values. */
+	fixup_read_and_payload_sizes();
+
+	/* Record the I/O resources in the PCI controller structure. */
+	for (i = 0; i < num_controllers; i++) {
+		struct pci_bus *root_bus = controllers[i].root_bus;
+		struct pci_bus *next_bus;
+		struct pci_dev *dev;
+
+		list_for_each_entry(dev, &root_bus->devices, bus_list) {
+			/* Find the PCI host controller, ie. the 1st bridge. */
+			if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
+				(PCI_SLOT(dev->devfn) == 0)) {
+				next_bus = dev->subordinate;
+				controllers[i].mem_resources[0] =
+					*next_bus->resource[0];
+				controllers[i].mem_resources[1] =
+					 *next_bus->resource[1];
+				controllers[i].mem_resources[2] =
+					 *next_bus->resource[2];
+
+				break;
+			}
+		}
+
+	}
+
+	return 0;
+}
+subsys_initcall(pcibios_init);
+
+/*
+ * No bus fixups needed.
+ */
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+	/* Nothing needs to be done. */
+}
+
+/*
+ * This can be called from the generic PCI layer, but doesn't need to
+ * do anything.
+ */
+char __devinit *pcibios_setup(char *str)
+{
+	/* Nothing needs to be done. */
+	return str;
+}
+
+/*
+ * This is called from the generic Linux layer.
+ */
+void __init pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+/*
+ * Enable memory and/or address decoding, as appropriate, for the
+ * device described by the 'dev' struct.
+ *
+ * This is called from the generic PCI layer, and can be called
+ * for bridges or endpoints.
+ */
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	u16 cmd, old_cmd;
+	u8 header_type;
+	int i;
+	struct resource *r;
+
+	pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
+	if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+		/*
+		 * For bridges, we enable both memory and I/O decoding
+		 * in call cases.
+		 */
+		cmd |= PCI_COMMAND_IO;
+		cmd |= PCI_COMMAND_MEMORY;
+	} else {
+		/*
+		 * For endpoints, we enable memory and/or I/O decoding
+		 * only if they have a memory resource of that type.
+		 */
+		for (i = 0; i < 6; i++) {
+			r = &dev->resource[i];
+			if (r->flags & IORESOURCE_UNSET) {
+				pr_err("PCI: Device %s not available "
+				       "because of resource collisions\n",
+				       pci_name(dev));
+				return -EINVAL;
+			}
+			if (r->flags & IORESOURCE_IO)
+				cmd |= PCI_COMMAND_IO;
+			if (r->flags & IORESOURCE_MEM)
+				cmd |= PCI_COMMAND_MEMORY;
+		}
+	}
+
+	/*
+	 * We only write the command if it changed.
+	 */
+	if (cmd != old_cmd)
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	return 0;
+}
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
+{
+	unsigned long start = pci_resource_start(dev, bar);
+	unsigned long len = pci_resource_len(dev, bar);
+	unsigned long flags = pci_resource_flags(dev, bar);
+
+	if (!len)
+		return NULL;
+	if (max && len > max)
+		len = max;
+
+	if (!(flags & IORESOURCE_MEM)) {
+		pr_info("PCI: Trying to map invalid resource %#lx\n", flags);
+		start = 0;
+	}
+
+	return (void __iomem *)start;
+}
+EXPORT_SYMBOL(pci_iomap);
+
+
+/****************************************************************
+ *
+ * Tile PCI config space read/write routines
+ *
+ ****************************************************************/
+
+/*
+ * These are the normal read and write ops
+ * These are expanded with macros from  pci_bus_read_config_byte() etc.
+ *
+ * devfn is the combined PCI slot & function.
+ *
+ * offset is in bytes, from the start of config space for the
+ * specified bus & slot.
+ */
+
+static int __devinit tile_cfg_read(struct pci_bus *bus,
+				   unsigned int devfn,
+				   int offset,
+				   int size,
+				   u32 *val)
+{
+	struct pci_controller *controller = bus->sysdata;
+	int busnum = bus->number & 0xff;
+	int slot = (devfn >> 3) & 0x1f;
+	int function = devfn & 0x7;
+	u32 addr;
+	int config_mode = 1;
+
+	/*
+	 * There is no bridge between the Tile and bus 0, so we
+	 * use config0 to talk to bus 0.
+	 *
+	 * If we're talking to a bus other than zero then we
+	 * must have found a bridge.
+	 */
+	if (busnum == 0) {
+		/*
+		 * We fake an empty slot for (busnum == 0) && (slot > 0),
+		 * since there is only one slot on bus 0.
+		 */
+		if (slot) {
+			*val = 0xFFFFFFFF;
+			return 0;
+		}
+		config_mode = 0;
+	}
+
+	addr = busnum << 20;		/* Bus in 27:20 */
+	addr |= slot << 15;		/* Slot (device) in 19:15 */
+	addr |= function << 12;		/* Function is in 14:12 */
+	addr |= (offset & 0xFFF);	/* byte address in 0:11 */
+
+	return hv_dev_pread(controller->hv_cfg_fd[config_mode], 0,
+			    (HV_VirtAddr)(val), size, addr);
+}
+
+
+/*
+ * See tile_cfg_read() for relevent comments.
+ * Note that "val" is the value to write, not a pointer to that value.
+ */
+static int __devinit tile_cfg_write(struct pci_bus *bus,
+				    unsigned int devfn,
+				    int offset,
+				    int size,
+				    u32 val)
+{
+	struct pci_controller *controller = bus->sysdata;
+	int busnum = bus->number & 0xff;
+	int slot = (devfn >> 3) & 0x1f;
+	int function = devfn & 0x7;
+	u32 addr;
+	int config_mode = 1;
+	HV_VirtAddr valp = (HV_VirtAddr)&val;
+
+	/*
+	 * For bus 0 slot 0 we use config 0 accesses.
+	 */
+	if (busnum == 0) {
+		/*
+		 * We fake an empty slot for (busnum == 0) && (slot > 0),
+		 * since there is only one slot on bus 0.
+		 */
+		if (slot)
+			return 0;
+		config_mode = 0;
+	}
+
+	addr = busnum << 20;		/* Bus in 27:20 */
+	addr |= slot << 15;		/* Slot (device) in 19:15 */
+	addr |= function << 12;		/* Function is in 14:12 */
+	addr |= (offset & 0xFFF);	/* byte address in 0:11 */
+
+#ifdef __BIG_ENDIAN
+	/* Point to the correct part of the 32-bit "val". */
+	valp += 4 - size;
+#endif
+
+	return hv_dev_pwrite(controller->hv_cfg_fd[config_mode], 0,
+			     valp, size, addr);
+}
+
+
+static struct pci_ops tile_cfg_ops = {
+	.read =         tile_cfg_read,
+	.write =        tile_cfg_write,
+};
+
+
+/*
+ * In the following, each PCI controller's mem_resources[1]
+ * represents its (non-prefetchable) PCI memory resource.
+ * mem_resources[0] and mem_resources[2] refer to its PCI I/O and
+ * prefetchable PCI memory resources, respectively.
+ * For more details, see pci_setup_bridge() in setup-bus.c.
+ * By comparing the target PCI memory address against the
+ * end address of controller 0, we can determine the controller
+ * that should accept the PCI memory access.
+ */
+#define TILE_READ(size, type)						\
+type _tile_read##size(unsigned long addr)				\
+{									\
+	type val;							\
+	int idx = 0;							\
+	if (addr > controllers[0].mem_resources[1].end &&		\
+	    addr > controllers[0].mem_resources[2].end)			\
+		idx = 1;                                                \
+	if (hv_dev_pread(controllers[idx].hv_mem_fd, 0,			\
+			 (HV_VirtAddr)(&val), sizeof(type), addr))	\
+		pr_err("PCI: read %zd bytes at 0x%lX failed\n",		\
+		       sizeof(type), addr);				\
+	return val;							\
+}									\
+EXPORT_SYMBOL(_tile_read##size)
+
+TILE_READ(b, u8);
+TILE_READ(w, u16);
+TILE_READ(l, u32);
+TILE_READ(q, u64);
+
+#define TILE_WRITE(size, type)						\
+void _tile_write##size(type val, unsigned long addr)			\
+{									\
+	int idx = 0;							\
+	if (addr > controllers[0].mem_resources[1].end &&		\
+	    addr > controllers[0].mem_resources[2].end)			\
+		idx = 1;                                                \
+	if (hv_dev_pwrite(controllers[idx].hv_mem_fd, 0,		\
+			  (HV_VirtAddr)(&val), sizeof(type), addr))	\
+		pr_err("PCI: write %zd bytes at 0x%lX failed\n",	\
+		       sizeof(type), addr);				\
+}									\
+EXPORT_SYMBOL(_tile_write##size)
+
+TILE_WRITE(b, u8);
+TILE_WRITE(w, u16);
+TILE_WRITE(l, u32);
+TILE_WRITE(q, u64);
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index f01e344cf4bd..98e6fdf34d30 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
 obj-$(CONFIG_X86_VISWS) += setup-irq.o
 obj-$(CONFIG_MN10300) += setup-bus.o
 obj-$(CONFIG_MICROBLAZE) += setup-bus.o
+obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o
 
 #
 # ACPI Related PCI FW Functions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index f5c63fe9db5c..6f9350cabbd5 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2136,6 +2136,24 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB,
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
 			quirk_unhide_mch_dev6);
 
+#ifdef CONFIG_TILE
+/*
+ * The Tilera TILEmpower platform needs to set the link speed
+ * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed
+ * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe
+ * capability register of the PEX8624 PCIe switch. The switch
+ * supports link speed auto negotiation, but falsely sets
+ * the link speed to 5GT/s.
+ */
+static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev)
+{
+	if (tile_plx_gen1) {
+		pci_write_config_dword(dev, 0x98, 0x1);
+		mdelay(50);
+	}
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1);
+#endif /* CONFIG_TILE */
 
 #ifdef CONFIG_PCI_MSI
 /* Some chipsets do not support MSI. We cannot easily rely on setting

From 4d658d13c90f14cf3510ca15cafe2f4aa9e23d64 Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Wed, 24 Nov 2010 13:42:15 -0500
Subject: [PATCH 0928/1066] arch/tile: make glibc's
 sysconf(_SC_NPROCESSORS_CONF) work correctly

glibc assumes that it can count /sys/devices/system/cpu/cpu* to get
the number of configured cpus.  For this to be valid on tile, we need
to generate a "cpu" entry for all cpus, including the ones that are
not currently allocated for Linux's use.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 arch/tile/kernel/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
index fb0b3cbeae14..f18573643ed1 100644
--- a/arch/tile/kernel/setup.c
+++ b/arch/tile/kernel/setup.c
@@ -840,7 +840,7 @@ static int __init topology_init(void)
 	for_each_online_node(i)
 		register_one_node(i);
 
-	for_each_present_cpu(i)
+	for (i = 0; i < smp_height * smp_width; ++i)
 		register_cpu(&cpu_devices[i], i);
 
 	return 0;

From 3edabee2ed22ee4f98f4b4bb38a41059226a8446 Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Wed, 24 Nov 2010 13:57:42 -0500
Subject: [PATCH 0929/1066] arch/tile: fix memchr() not to dereference memory
 for zero length

This change fixes a bug that memchr() will read the first word
of the source even if the length is zero.  Ironically, the code
was originally written with a test to avoid exactly this problem,
but to make the code conform to Linux coding standards with all
declarations preceding all statements, the first load from memory
was moved up above that test as the initial value for a variable.

The change just moves all the variable declarations to the top
of the file, with no initializers, so that the test can also be
at the top of the file.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 arch/tile/lib/memchr_32.c | 35 +++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)

diff --git a/arch/tile/lib/memchr_32.c b/arch/tile/lib/memchr_32.c
index 6235283b4859..cc3d9badf030 100644
--- a/arch/tile/lib/memchr_32.c
+++ b/arch/tile/lib/memchr_32.c
@@ -18,12 +18,24 @@
 
 void *memchr(const void *s, int c, size_t n)
 {
+	const uint32_t *last_word_ptr;
+	const uint32_t *p;
+	const char *last_byte_ptr;
+	uintptr_t s_int;
+	uint32_t goal, before_mask, v, bits;
+	char *ret;
+
+	if (__builtin_expect(n == 0, 0)) {
+		/* Don't dereference any memory if the array is empty. */
+		return NULL;
+	}
+
 	/* Get an aligned pointer. */
-	const uintptr_t s_int = (uintptr_t) s;
-	const uint32_t *p = (const uint32_t *)(s_int & -4);
+	s_int = (uintptr_t) s;
+	p = (const uint32_t *)(s_int & -4);
 
 	/* Create four copies of the byte for which we are looking. */
-	const uint32_t goal = 0x01010101 * (uint8_t) c;
+	goal = 0x01010101 * (uint8_t) c;
 
 	/* Read the first word, but munge it so that bytes before the array
 	 * will not match goal.
@@ -31,23 +43,14 @@ void *memchr(const void *s, int c, size_t n)
 	 * Note that this shift count expression works because we know
 	 * shift counts are taken mod 32.
 	 */
-	const uint32_t before_mask = (1 << (s_int << 3)) - 1;
-	uint32_t v = (*p | before_mask) ^ (goal & before_mask);
+	before_mask = (1 << (s_int << 3)) - 1;
+	v = (*p | before_mask) ^ (goal & before_mask);
 
 	/* Compute the address of the last byte. */
-	const char *const last_byte_ptr = (const char *)s + n - 1;
+	last_byte_ptr = (const char *)s + n - 1;
 
 	/* Compute the address of the word containing the last byte. */
-	const uint32_t *const last_word_ptr =
-	    (const uint32_t *)((uintptr_t) last_byte_ptr & -4);
-
-	uint32_t bits;
-	char *ret;
-
-	if (__builtin_expect(n == 0, 0)) {
-		/* Don't dereference any memory if the array is empty. */
-		return NULL;
-	}
+	last_word_ptr = (const uint32_t *)((uintptr_t) last_byte_ptr & -4);
 
 	while ((bits = __insn_seqb(v, goal)) == 0) {
 		if (__builtin_expect(p == last_word_ptr, 0)) {

From 4448008eb12f4b6bb9993584de8ec1d20b708d6f Mon Sep 17 00:00:00 2001
From: Steven Rostedt <rostedt@goodmis.org>
Date: Wed, 24 Nov 2010 11:19:05 -0800
Subject: [PATCH 0930/1066] isdn: icn: Fix stack corruption bug.

Running randconfig with ktest.pl I hit this bug:

[   16.101158] ICN-ISDN-driver Rev 1.65.6.8 mem=0x000d0000
[   16.106376] icn: (line0) ICN-2B, port 0x320 added
[   16.111064] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c1642880
[   16.111066]
[   16.121214] Pid: 1, comm: swapper Not tainted 2.6.37-rc2-test-00124-g6656b3f #8
[   16.128499] Call Trace:
[   16.130942]  [<c0f51662>] ? printk+0x1d/0x23
[   16.135200]  [<c0f5153f>] panic+0x5c/0x162
[   16.139286]  [<c0d62a9a>] ? icn_addcard+0x6d/0xbe
[   16.143975]  [<c0445783>] print_tainted+0x0/0x8c
[   16.148582]  [<c1642880>] ? icn_init+0xd8/0xdf
[   16.153012]  [<c1642880>] icn_init+0xd8/0xdf
[   16.157271]  [<c04012e5>] do_one_initcall+0x8c/0x143
[   16.162222]  [<c16427a8>] ? icn_init+0x0/0xdf
[   16.166566]  [<c15f1a05>] kernel_init+0x13f/0x1da
[   16.171256]  [<c15f18c6>] ? kernel_init+0x0/0x1da
[   16.175945]  [<c0403bfe>] kernel_thread_helper+0x6/0x10
[   16.181181] panic occurred, switching back to text console

Looking into it I found that the stack was corrupted by the assignment
of the Rev #. The variable rev is given 10 bytes, and in this output the
characters that were copied was: " 1.65.6.8 $". Which was 11 characters
plus the null ending character for a total of 12 bytes, thus corrupting
the stack.

This patch ups the variable size to 20 bytes as well as changes the
strcpy to strncpy. I also added a check to make sure '$' is found.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/isdn/icn/icn.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/isdn/icn/icn.c b/drivers/isdn/icn/icn.c
index 2e847a90bad0..f2b5bab5e6a1 100644
--- a/drivers/isdn/icn/icn.c
+++ b/drivers/isdn/icn/icn.c
@@ -1627,7 +1627,7 @@ __setup("icn=", icn_setup);
 static int __init icn_init(void)
 {
 	char *p;
-	char rev[10];
+	char rev[20];
 
 	memset(&dev, 0, sizeof(icn_dev));
 	dev.memaddr = (membase & 0x0ffc000);
@@ -1637,9 +1637,10 @@ static int __init icn_init(void)
 	spin_lock_init(&dev.devlock);
 
 	if ((p = strchr(revision, ':'))) {
-		strcpy(rev, p + 1);
+		strncpy(rev, p + 1, 20);
 		p = strchr(rev, '$');
-		*p = 0;
+		if (p)
+			*p = 0;
 	} else
 		strcpy(rev, " ??? ");
 	printk(KERN_NOTICE "ICN-ISDN-driver Rev%smem=0x%08lx\n", rev,

From c39508d6f118308355468314ff414644115a07f3 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 24 Nov 2010 11:47:22 -0800
Subject: [PATCH 0931/1066] tcp: Make TCP_MAXSEG minimum more correct.

Use TCP_MIN_MSS instead of constant 64.

Reported-by: Min Zhang <mzhang@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/tcp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 081419969485..f15c36a706ec 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2246,7 +2246,7 @@ static int do_tcp_setsockopt(struct sock *sk, int level,
 		/* Values greater than interface MTU won't take effect. However
 		 * at the point when this call is done we typically don't yet
 		 * know which interface is going to be used */
-		if (val < 64 || val > MAX_TCP_WINDOW) {
+		if (val < TCP_MIN_MSS || val > MAX_TCP_WINDOW) {
 			err = -EINVAL;
 			break;
 		}

From fa0e846494792e722d817b9d3d625a4ef4896c96 Mon Sep 17 00:00:00 2001
From: Phil Blundell <philb@gnu.org>
Date: Wed, 24 Nov 2010 11:49:19 -0800
Subject: [PATCH 0932/1066] econet: disallow NULL remote addr for sendmsg(),
 fixes CVE-2010-3849

Later parts of econet_sendmsg() rely on saddr != NULL, so return early
with EINVAL if NULL was passed otherwise an oops may occur.

Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/econet/af_econet.c | 26 ++++++++------------------
 1 file changed, 8 insertions(+), 18 deletions(-)

diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index f8c1ae4b41f0..e366f1bef91f 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -297,23 +297,14 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock,
 
 	mutex_lock(&econet_mutex);
 
-	if (saddr == NULL) {
-		struct econet_sock *eo = ec_sk(sk);
-
-		addr.station = eo->station;
-		addr.net     = eo->net;
-		port	     = eo->port;
-		cb	     = eo->cb;
-	} else {
-		if (msg->msg_namelen < sizeof(struct sockaddr_ec)) {
-			mutex_unlock(&econet_mutex);
-			return -EINVAL;
-		}
-		addr.station = saddr->addr.station;
-		addr.net = saddr->addr.net;
-		port = saddr->port;
-		cb = saddr->cb;
-	}
+        if (saddr == NULL || msg->msg_namelen < sizeof(struct sockaddr_ec)) {
+                mutex_unlock(&econet_mutex);
+                return -EINVAL;
+        }
+        addr.station = saddr->addr.station;
+        addr.net = saddr->addr.net;
+        port = saddr->port;
+        cb = saddr->cb;
 
 	/* Look for a device with the right network number. */
 	dev = net2dev_map[addr.net];
@@ -351,7 +342,6 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock,
 
 		eb = (struct ec_cb *)&skb->cb;
 
-		/* BUG: saddr may be NULL */
 		eb->cookie = saddr->cookie;
 		eb->sec = *saddr;
 		eb->sent = ec_tx_done;

From 16c41745c7b92a243d0874f534c1655196c64b74 Mon Sep 17 00:00:00 2001
From: Phil Blundell <philb@gnu.org>
Date: Wed, 24 Nov 2010 11:49:53 -0800
Subject: [PATCH 0933/1066] econet: fix CVE-2010-3850

Add missing check for capable(CAP_NET_ADMIN) in SIOCSIFADDR operation.

Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/econet/af_econet.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index e366f1bef91f..d41ba8e56c10 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -661,6 +661,9 @@ static int ec_dev_ioctl(struct socket *sock, unsigned int cmd, void __user *arg)
 	err = 0;
 	switch (cmd) {
 	case SIOCSIFADDR:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+
 		edev = dev->ec_ptr;
 		if (edev == NULL) {
 			/* Magic up a new one. */

From a27e13d370415add3487949c60810e36069a23a6 Mon Sep 17 00:00:00 2001
From: Phil Blundell <philb@gnu.org>
Date: Wed, 24 Nov 2010 11:51:47 -0800
Subject: [PATCH 0934/1066] econet: fix CVE-2010-3848

Don't declare variable sized array of iovecs on the stack since this
could cause stack overflow if msg->msgiovlen is large.  Instead, coalesce
the user-supplied data into a new buffer and use a single iovec for it.

Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/econet/af_econet.c | 62 +++++++++++++++++++++---------------------
 1 file changed, 31 insertions(+), 31 deletions(-)

diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index d41ba8e56c10..13992e1d2726 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -31,6 +31,7 @@
 #include <linux/skbuff.h>
 #include <linux/udp.h>
 #include <linux/slab.h>
+#include <linux/vmalloc.h>
 #include <net/sock.h>
 #include <net/inet_common.h>
 #include <linux/stat.h>
@@ -276,12 +277,12 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock,
 #endif
 #ifdef CONFIG_ECONET_AUNUDP
 	struct msghdr udpmsg;
-	struct iovec iov[msg->msg_iovlen+1];
+	struct iovec iov[2];
 	struct aunhdr ah;
 	struct sockaddr_in udpdest;
 	__kernel_size_t size;
-	int i;
 	mm_segment_t oldfs;
+	char *userbuf;
 #endif
 
 	/*
@@ -319,17 +320,17 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock,
 		}
 	}
 
-	if (len + 15 > dev->mtu) {
-		mutex_unlock(&econet_mutex);
-		return -EMSGSIZE;
-	}
-
 	if (dev->type == ARPHRD_ECONET) {
 		/* Real hardware Econet.  We're not worthy etc. */
 #ifdef CONFIG_ECONET_NATIVE
 		unsigned short proto = 0;
 		int res;
 
+		if (len + 15 > dev->mtu) {
+			mutex_unlock(&econet_mutex);
+			return -EMSGSIZE;
+		}
+
 		dev_hold(dev);
 
 		skb = sock_alloc_send_skb(sk, len+LL_ALLOCATED_SPACE(dev),
@@ -405,6 +406,11 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock,
 		return -ENETDOWN;		/* No socket - can't send */
 	}
 
+	if (len > 32768) {
+		err = -E2BIG;
+		goto error;
+	}
+
 	/* Make up a UDP datagram and hand it off to some higher intellect. */
 
 	memset(&udpdest, 0, sizeof(udpdest));
@@ -436,36 +442,26 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock,
 
 	/* tack our header on the front of the iovec */
 	size = sizeof(struct aunhdr);
-	/*
-	 * XXX: that is b0rken.  We can't mix userland and kernel pointers
-	 * in iovec, since on a lot of platforms copy_from_user() will
-	 * *not* work with the kernel and userland ones at the same time,
-	 * regardless of what we do with set_fs().  And we are talking about
-	 * econet-over-ethernet here, so "it's only ARM anyway" doesn't
-	 * apply.  Any suggestions on fixing that code?		-- AV
-	 */
 	iov[0].iov_base = (void *)&ah;
 	iov[0].iov_len = size;
-	for (i = 0; i < msg->msg_iovlen; i++) {
-		void __user *base = msg->msg_iov[i].iov_base;
-		size_t iov_len = msg->msg_iov[i].iov_len;
-		/* Check it now since we switch to KERNEL_DS later. */
-		if (!access_ok(VERIFY_READ, base, iov_len)) {
-			mutex_unlock(&econet_mutex);
-			return -EFAULT;
-		}
-		iov[i+1].iov_base = base;
-		iov[i+1].iov_len = iov_len;
-		size += iov_len;
+
+	userbuf = vmalloc(len);
+	if (userbuf == NULL) {
+		err = -ENOMEM;
+		goto error;
 	}
 
+	iov[1].iov_base = userbuf;
+	iov[1].iov_len = len;
+	err = memcpy_fromiovec(userbuf, msg->msg_iov, len);
+	if (err)
+		goto error_free_buf;
+
 	/* Get a skbuff (no data, just holds our cb information) */
 	if ((skb = sock_alloc_send_skb(sk, 0,
 				       msg->msg_flags & MSG_DONTWAIT,
-				       &err)) == NULL) {
-		mutex_unlock(&econet_mutex);
-		return err;
-	}
+				       &err)) == NULL)
+		goto error_free_buf;
 
 	eb = (struct ec_cb *)&skb->cb;
 
@@ -481,7 +477,7 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock,
 	udpmsg.msg_name = (void *)&udpdest;
 	udpmsg.msg_namelen = sizeof(udpdest);
 	udpmsg.msg_iov = &iov[0];
-	udpmsg.msg_iovlen = msg->msg_iovlen + 1;
+	udpmsg.msg_iovlen = 2;
 	udpmsg.msg_control = NULL;
 	udpmsg.msg_controllen = 0;
 	udpmsg.msg_flags=0;
@@ -489,9 +485,13 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock,
 	oldfs = get_fs(); set_fs(KERNEL_DS);	/* More privs :-) */
 	err = sock_sendmsg(udpsock, &udpmsg, size);
 	set_fs(oldfs);
+
+error_free_buf:
+	vfree(userbuf);
 #else
 	err = -EPROTOTYPE;
 #endif
+	error:
 	mutex_unlock(&econet_mutex);
 
 	return err;

From 0e91ec0c06d2cd15071a6021c94840a50e6671aa Mon Sep 17 00:00:00 2001
From: James Jones <jajones@nvidia.com>
Date: Wed, 24 Nov 2010 00:21:37 +0100
Subject: [PATCH 0935/1066] ARM: 6482/2: Fix find_next_zero_bit and related
 assembly

The find_next_bit, find_first_bit, find_next_zero_bit
and find_first_zero_bit functions were not properly
clamping to the maxbit argument at the bit level. They
were instead only checking maxbit at the byte level.
To fix this, add a compare and a conditional move
instruction to the end of the common bit-within-the-
byte code used by all the functions and be sure not to
clobber the maxbit argument before it is used.

Cc: <stable@kernel.org>
Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: James Jones <jajones@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/lib/findbit.S | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index 1e4cbd4e7be9..64f6bc1a9132 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -174,8 +174,8 @@ ENDPROC(_find_next_bit_be)
  */
 .L_found:
 #if __LINUX_ARM_ARCH__ >= 5
-		rsb	r1, r3, #0
-		and	r3, r3, r1
+		rsb	r0, r3, #0
+		and	r3, r3, r0
 		clz	r3, r3
 		rsb	r3, r3, #31
 		add	r0, r2, r3
@@ -190,5 +190,7 @@ ENDPROC(_find_next_bit_be)
 		addeq	r2, r2, #1
 		mov	r0, r2
 #endif
+		cmp	r1, r0			@ Clamp to maxbit
+		movlo	r0, r1
 		mov	pc, lr
 

From 50d431e8a15701b599c98afe2b464eb33c952477 Mon Sep 17 00:00:00 2001
From: Steven Rostedt <rostedt@goodmis.org>
Date: Wed, 24 Nov 2010 12:56:52 -0800
Subject: [PATCH 0936/1066] leds: fix bug with reading NAS SS4200 dmi code

While running randconfg with ktest.pl I stumbled upon this bug:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000003
  IP: [<ffffffff815fe44f>] strstr+0x39/0x86
  PGD 0
  Oops: 0000 [#1] SMP
  last sysfs file:
  CPU 0
  Modules linked in:

  Pid: 1, comm: swapper Not tainted 2.6.37-rc1-test+ #6 DG965MQ/
  RIP: 0010:[<ffffffff815fe44f>]  [<ffffffff815fe44f>] strstr+0x39/0x86
  RSP: 0018:ffff8800797cbd80  EFLAGS: 00010213
  RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffffffffffff
  RDX: 0000000000000000 RSI: ffffffff82eb7ac9 RDI: 0000000000000003
  RBP: ffff8800797cbda0 R08: ffff880000000003 R09: 0000000000030725
  R10: ffff88007d294c00 R11: 0000000000014c00 R12: 0000000000000020
  R13: ffffffff82eb7ac9 R14: ffffffffffffffff R15: ffffffff82eb7b08
  FS:  0000000000000000(0000) GS:ffff88007d200000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 0000000000000003 CR3: 0000000002a1d000 CR4: 00000000000006f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process swapper (pid: 1, threadinfo ffff8800797ca000, task ffff8800797d0000)
  Stack:
   00000000000000ba ffffffff82eb7ac9 ffffffff82eb7ab8 00000000000000ba
   ffff8800797cbdf0 ffffffff81e2050f ffff8800797cbdc0 00000000815f913b
   ffff8800797cbe00 ffffffff82eb7ab8 0000000000000000 0000000000000000
  Call Trace:
   [<ffffffff81e2050f>] dmi_matches+0x117/0x154
   [<ffffffff81e205d7>] dmi_check_system+0x3d/0x8d
   [<ffffffff82e1ad25>] ? nas_gpio_init+0x0/0x2c8
   [<ffffffff82e1ad49>] nas_gpio_init+0x24/0x2c8
   [<ffffffff820d750d>] ? wm8350_led_init+0x0/0x20
   [<ffffffff82e1ad25>] ? nas_gpio_init+0x0/0x2c8
   [<ffffffff810022f7>] do_one_initcall+0xab/0x1b2
   [<ffffffff82da749c>] kernel_init+0x248/0x331
   [<ffffffff8100e624>] kernel_thread_helper+0x4/0x10
   [<ffffffff82da7254>] ? kernel_init+0x0/0x331

Found that the nas_led_whitelist dmi_system_id structure array had no
NULL end delimiter, causing the dmi_check_system() loop to read an
undefined entry.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Dave Hansen <dave@sr71.net>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/leds/leds-ss4200.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c
index a688293abd0b..614ebebaaa28 100644
--- a/drivers/leds/leds-ss4200.c
+++ b/drivers/leds/leds-ss4200.c
@@ -102,6 +102,7 @@ static struct dmi_system_id __initdata nas_led_whitelist[] = {
 			DMI_MATCH(DMI_PRODUCT_VERSION, "1.00.00")
 		}
 	},
+	{}
 };
 
 /*

From 3a3a1af37f0405d15c0b64a6ce7f4878084442e0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Lo=C3=AFc=20Minier?= <loic.minier@linaro.org>
Date: Wed, 24 Nov 2010 12:56:53 -0800
Subject: [PATCH 0937/1066] include/linux/fs.h: fix userspace build
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

dpkg uses fiemap but didn't particularly need to include stdint.h so far.
Since 367a51a33902 ("fs: Add FITRIM ioctl"), build of linux/fs.h failed in
dpkg with:

  In file included from ../../src/filesdb.c:27:0:
  /usr/include/linux/fs.h:37:2: error: expected specifier-qualifier-list before 'uint64_t'

Use exportable type __u64 to avoid the dependency on stdint.h.

b31d42a5af18 ("Fix compile brekage with !CONFIG_BLOCK") fixed only the
kernel build by including linux/types.h, but this also fixed "make
headers_check", so don't revert it.

Signed-off-by: Loïc Minier <loic.minier@linaro.org>
Tested-by: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: Lukas Czerner <lczerner@redhat.com>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/fs.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/linux/fs.h b/include/linux/fs.h
index eedc00b7b1ee..c9e06cc70dad 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -34,9 +34,9 @@
 #define SEEK_MAX	SEEK_END
 
 struct fstrim_range {
-	uint64_t start;
-	uint64_t len;
-	uint64_t minlen;
+	__u64 start;
+	__u64 len;
+	__u64 minlen;
 };
 
 /* And dynamically-tunable limits and defaults: */

From 04c3496152394d17e3bc2316f9731ee3e8a026bc Mon Sep 17 00:00:00 2001
From: "Steven J. Magnani" <steve@digidescorp.com>
Date: Wed, 24 Nov 2010 12:56:54 -0800
Subject: [PATCH 0938/1066] nommu: yield CPU while disposing VM

Depending on processor speed, page size, and the amount of memory a
process is allowed to amass, cleanup of a large VM may freeze the system
for many seconds.  This can result in a watchdog timeout.

Make sure other tasks receive some service when cleaning up large VMs.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/nommu.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/mm/nommu.c b/mm/nommu.c
index 3613517c7592..27a9ac588516 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1717,6 +1717,7 @@ void exit_mmap(struct mm_struct *mm)
 		mm->mmap = vma->vm_next;
 		delete_vma_from_mm(vma);
 		delete_vma(mm, vma);
+		cond_resched();
 	}
 
 	kleave("");

From 69e83dad5207f8f03c9699e57e1febb114383cb8 Mon Sep 17 00:00:00 2001
From: Will Newton <will.newton@gmail.com>
Date: Wed, 24 Nov 2010 12:56:55 -0800
Subject: [PATCH 0939/1066] uml: disable winch irq before freeing handler data

Disable the winch irq early to make sure we don't take an interrupt part
way through the freeing of the handler data, resulting in a crash on
shutdown:

  winch_interrupt : read failed, errno = 9
  fd 13 is losing SIGWINCH support
  ------------[ cut here ]------------
  WARNING: at lib/list_debug.c:48 list_del+0xc6/0x100()
  list_del corruption, next is LIST_POISON1 (00100100)
  082578c8:  [<081fd77f>] dump_stack+0x22/0x24
  082578e0:  [<0807a18a>] warn_slowpath_common+0x5a/0x80
  08257908:  [<0807a23e>] warn_slowpath_fmt+0x2e/0x30
  08257920:  [<08172196>] list_del+0xc6/0x100
  08257940:  [<08060244>] free_winch+0x14/0x80
  08257958:  [<080606fb>] winch_interrupt+0xdb/0xe0
  08257978:  [<080a65b5>] handle_IRQ_event+0x35/0xe0
  08257998:  [<080a8717>] handle_edge_irq+0xb7/0x170
  082579bc:  [<08059bc4>] do_IRQ+0x34/0x50
  082579d4:  [<08059e1b>] sigio_handler+0x5b/0x80
  082579ec:  [<0806a374>] sig_handler_common+0x44/0xb0
  08257a68:  [<0806a538>] sig_handler+0x38/0x50
  08257a78:  [<0806a77c>] handle_signal+0x5c/0xa0
  08257a9c:  [<0806be28>] hard_handler+0x18/0x20
  08257aac:  [<00c14400>] 0xc14400

Signed-off-by: Will Newton <will.newton@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/drivers/line.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 7f7338c90784..1664cce7b0ac 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -727,6 +727,9 @@ struct winch {
 
 static void free_winch(struct winch *winch, int free_irq_ok)
 {
+	if (free_irq_ok)
+		free_irq(WINCH_IRQ, winch);
+
 	list_del(&winch->list);
 
 	if (winch->pid != -1)
@@ -735,8 +738,6 @@ static void free_winch(struct winch *winch, int free_irq_ok)
 		os_close_file(winch->fd);
 	if (winch->stack != 0)
 		free_stack(winch->stack, 0);
-	if (free_irq_ok)
-		free_irq(WINCH_IRQ, winch);
 	kfree(winch);
 }
 

From 112bc2e120a94a511858918d6866a4978f9c500e Mon Sep 17 00:00:00 2001
From: "Kirill A. Shutemov" <kirill@shutemov.name>
Date: Wed, 24 Nov 2010 12:56:58 -0800
Subject: [PATCH 0940/1066] memcg: fix false positive VM_BUG on non-SMP

Fix this:

  kernel BUG at mm/memcontrol.c:2155!
  invalid opcode: 0000 [#1]
  last sysfs file:

  Pid: 18, comm: sh Not tainted 2.6.37-rc3 #3 /Bochs
  EIP: 0060:[<c10731b2>] EFLAGS: 00000246 CPU: 0
  EIP is at mem_cgroup_move_account+0xe2/0xf0
  EAX: 00000004 EBX: c6f931d4 ECX: c681c300 EDX: c681c000
  ESI: c681c300 EDI: ffffffea EBP: c681c000 ESP: c46f3e30
   DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
  Process sh (pid: 18, ti=c46f2000 task=c6826e60 task.ti=c46f2000)
  Stack:
   00000155 c681c000 0805f000 c46ee180 c46f3e5c c7058820 c1074d37 00000000
   08060000 c46db9a0 c46ec080 c7058820 0805f000 08060000 c46f3e98 c1074c50
   c106c75e c46f3e98 c46ec080 08060000 0805ffff c46db9a0 c46f3e98 c46e0340
  Call Trace:
   [<c1074d37>] ? mem_cgroup_move_charge_pte_range+0xe7/0x130
   [<c1074c50>] ? mem_cgroup_move_charge_pte_range+0x0/0x130
   [<c106c75e>] ? walk_page_range+0xee/0x1d0
   [<c10725d6>] ? mem_cgroup_move_task+0x66/0x90
   [<c1074c50>] ? mem_cgroup_move_charge_pte_range+0x0/0x130
   [<c1072570>] ? mem_cgroup_move_task+0x0/0x90
   [<c1042616>] ? cgroup_attach_task+0x136/0x200
   [<c1042878>] ? cgroup_tasks_write+0x48/0xc0
   [<c1041e9e>] ? cgroup_file_write+0xde/0x220
   [<c101398d>] ? do_page_fault+0x17d/0x3f0
   [<c108a79d>] ? alloc_fd+0x2d/0xd0
   [<c1041dc0>] ? cgroup_file_write+0x0/0x220
   [<c1077ba2>] ? vfs_write+0x92/0xc0
   [<c1077c81>] ? sys_write+0x41/0x70
   [<c1140e3d>] ? syscall_call+0x7/0xb
  Code: 03 00 74 09 8b 44 24 04 e8 1c f1 ff ff 89 73 04 8d 86 b0 00 00 00 b9 01 00 00 00 89 da 31 ff e8 65 f5 ff ff e9 4d ff ff ff 0f 0b <0f> 0b 0f 0b 0f 0b 90 8d b4 26 00 00 00 00 83 ec 10 8b 0d f4 e3
  EIP: [<c10731b2>] mem_cgroup_move_account+0xe2/0xf0 SS:ESP 0068:c46f3e30
  ---[ end trace 7daa1582159b6532 ]---

lock_page_cgroup and unlock_page_cgroup are implemented using
bit_spinlock.  bit_spinlock doesn't touch the bit if we are on non-SMP
machine, so we can't use the bit to check whether the lock was taken.

Let's introduce is_page_cgroup_locked based on bit_spin_is_locked instead
of PageCgroupLocked to fix it.

[akpm@linux-foundation.org: s/is_page_cgroup_locked/page_is_cgroup_locked/]
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/page_cgroup.h | 7 +++++--
 mm/memcontrol.c             | 2 +-
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h
index 5bb13b3db84d..b02195dfc1b0 100644
--- a/include/linux/page_cgroup.h
+++ b/include/linux/page_cgroup.h
@@ -59,8 +59,6 @@ static inline void ClearPageCgroup##uname(struct page_cgroup *pc)	\
 static inline int TestClearPageCgroup##uname(struct page_cgroup *pc)	\
 	{ return test_and_clear_bit(PCG_##lname, &pc->flags);  }
 
-TESTPCGFLAG(Locked, LOCK)
-
 /* Cache flag is set only once (at allocation) */
 TESTPCGFLAG(Cache, CACHE)
 CLEARPCGFLAG(Cache, CACHE)
@@ -104,6 +102,11 @@ static inline void unlock_page_cgroup(struct page_cgroup *pc)
 	bit_spin_unlock(PCG_LOCK, &pc->flags);
 }
 
+static inline int page_is_cgroup_locked(struct page_cgroup *pc)
+{
+	return bit_spin_is_locked(PCG_LOCK, &pc->flags);
+}
+
 #else /* CONFIG_CGROUP_MEM_RES_CTLR */
 struct page_cgroup;
 
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 2efa8ea07ff7..62d1880f6992 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -2152,7 +2152,7 @@ static void __mem_cgroup_move_account(struct page_cgroup *pc,
 {
 	VM_BUG_ON(from == to);
 	VM_BUG_ON(PageLRU(pc->page));
-	VM_BUG_ON(!PageCgroupLocked(pc));
+	VM_BUG_ON(!page_is_cgroup_locked(pc));
 	VM_BUG_ON(!PageCgroupUsed(pc));
 	VM_BUG_ON(pc->mem_cgroup != from);
 

From c22c7aeff69796f46ae0fcec141538e28f50b24e Mon Sep 17 00:00:00 2001
From: "Robin@sgi.com" <Robin@sgi.com>
Date: Wed, 24 Nov 2010 12:56:59 -0800
Subject: [PATCH 0941/1066] sgi-xpc: XPC fails to discover partitions with all
 nasids above 128

UV hardware defines 256 memory protection regions versus the baseline 64
with increasing size for the SN2 ia64.  This was overlooked when XPC was
modified to accomodate both UV and SN2.

Without this patch, a user could reconfigure their existing system and
suddenly disable cross-partition communications with no indication of what
has gone wrong.  It also prevents larger configurations from using
cross-partition communication.

Signed-off-by: Robin Holt <holt@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/sgi-xp/xpc_partition.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c
index d551f09ccb79..6956f7e7d439 100644
--- a/drivers/misc/sgi-xp/xpc_partition.c
+++ b/drivers/misc/sgi-xp/xpc_partition.c
@@ -439,18 +439,23 @@ xpc_discovery(void)
 	 * nodes that can comprise an access protection grouping. The access
 	 * protection is in regards to memory, IOI and IPI.
 	 */
-	max_regions = 64;
 	region_size = xp_region_size;
 
-	switch (region_size) {
-	case 128:
-		max_regions *= 2;
-	case 64:
-		max_regions *= 2;
-	case 32:
-		max_regions *= 2;
-		region_size = 16;
-		DBUG_ON(!is_shub2());
+	if (is_uv())
+		max_regions = 256;
+	else {
+		max_regions = 64;
+
+		switch (region_size) {
+		case 128:
+			max_regions *= 2;
+		case 64:
+			max_regions *= 2;
+		case 32:
+			max_regions *= 2;
+			region_size = 16;
+			DBUG_ON(!is_shub2());
+		}
 	}
 
 	for (region = 0; region < max_regions; region++) {

From a0822c55779d9319939eac69f00bb729ea9d23da Mon Sep 17 00:00:00 2001
From: Ken Sumrall <ksumrall@android.com>
Date: Wed, 24 Nov 2010 12:57:00 -0800
Subject: [PATCH 0942/1066] fuse: fix attributes after open(O_TRUNC)

The attribute cache for a file was not being cleared when a file is opened
with O_TRUNC.

If the filesystem's open operation truncates the file ("atomic_o_trunc"
feature flag is set) then the kernel should invalidate the cached st_mtime
and st_ctime attributes.

Also i_size should be explicitly be set to zero as it is used sometimes
without refreshing the cache.

Signed-off-by: Ken Sumrall <ksumrall@android.com>
Cc: Anfei <anfei.zhou@gmail.com>
Cc: "Anand V. Avati" <avati@gluster.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fuse/file.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index c8224587123f..9242d294fe90 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -134,6 +134,7 @@ EXPORT_SYMBOL_GPL(fuse_do_open);
 void fuse_finish_open(struct inode *inode, struct file *file)
 {
 	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = get_fuse_conn(inode);
 
 	if (ff->open_flags & FOPEN_DIRECT_IO)
 		file->f_op = &fuse_direct_io_file_operations;
@@ -141,6 +142,15 @@ void fuse_finish_open(struct inode *inode, struct file *file)
 		invalidate_inode_pages2(inode->i_mapping);
 	if (ff->open_flags & FOPEN_NONSEEKABLE)
 		nonseekable_open(inode, file);
+	if (fc->atomic_o_trunc && (file->f_flags & O_TRUNC)) {
+		struct fuse_inode *fi = get_fuse_inode(inode);
+
+		spin_lock(&fc->lock);
+		fi->attr_version = ++fc->attr_version;
+		i_size_write(inode, 0);
+		spin_unlock(&fc->lock);
+		fuse_invalidate_attr(inode);
+	}
 }
 
 int fuse_open_common(struct inode *inode, struct file *file, bool isdir)

From 9fdb18b6cb225fa7a874985fcb4a370cce1ac086 Mon Sep 17 00:00:00 2001
From: Samu Onkalo <samu.p.onkalo@nokia.com>
Date: Wed, 24 Nov 2010 12:57:02 -0800
Subject: [PATCH 0943/1066] drivers/leds/leds-lp5521.c: change some macros to
 functions

Some small macros changed to inline functions to have proper type
checking.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/leds/leds-lp5521.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 3782f31f06d2..fe69e5229a57 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -125,11 +125,22 @@ struct lp5521_chip {
 	u8			num_leds;
 };
 
-#define cdev_to_led(c)		container_of(c, struct lp5521_led, cdev)
-#define engine_to_lp5521(eng)	container_of((eng), struct lp5521_chip, \
-						engines[(eng)->id - 1])
-#define led_to_lp5521(led)	container_of((led), struct lp5521_chip, \
-						leds[(led)->id])
+static inline struct lp5521_led *cdev_to_led(struct led_classdev *cdev)
+{
+	return container_of(cdev, struct lp5521_led, cdev);
+}
+
+static inline struct lp5521_chip *engine_to_lp5521(struct lp5521_engine *engine)
+{
+	return container_of(engine, struct lp5521_chip,
+			    engines[engine->id - 1]);
+}
+
+static inline struct lp5521_chip *led_to_lp5521(struct lp5521_led *led)
+{
+	return container_of(led, struct lp5521_chip,
+			    leds[led->id]);
+}
 
 static void lp5521_led_brightness_work(struct work_struct *work);
 

From 87dbf6234d965851e7e13cbe80ad439f5fcb99c8 Mon Sep 17 00:00:00 2001
From: Samu Onkalo <samu.p.onkalo@nokia.com>
Date: Wed, 24 Nov 2010 12:57:03 -0800
Subject: [PATCH 0944/1066] drivers/leds/leds-lp5523.c: change some macros to
 functions

A small macro changed to inline function to have proper type checking.
Inline added to two similar small functions.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/leds/leds-lp5523.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index 1e11fcc08b28..053e1f8b6c0b 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -134,15 +134,18 @@ struct lp5523_chip {
 	u8			num_leds;
 };
 
-#define cdev_to_led(c)          container_of(c, struct lp5523_led, cdev)
+static inline struct lp5523_led *cdev_to_led(struct led_classdev *cdev)
+{
+	return container_of(cdev, struct lp5523_led, cdev);
+}
 
-static struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
+static inline struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
 {
 	return container_of(engine, struct lp5523_chip,
 			    engines[engine->id - 1]);
 }
 
-static struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
+static inline struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
 {
 	return container_of(led, struct lp5523_chip,
 			    leds[led->id]);

From 09c76b0f6e8fcd78f2d194acb1f07e41789cc29b Mon Sep 17 00:00:00 2001
From: Samu Onkalo <samu.p.onkalo@nokia.com>
Date: Wed, 24 Nov 2010 12:57:03 -0800
Subject: [PATCH 0945/1066] drivers/leds/leds-lp5521.c: adjust delays and add
 comments to them

Delays were little bit too long.  Adjust delay times and add some comments
to them.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/leds/leds-lp5521.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index fe69e5229a57..963c014be0bf 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -196,14 +196,17 @@ static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern)
 
 	/* move current engine to direct mode and remember the state */
 	ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT);
-	usleep_range(1000, 10000);
+	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
+	usleep_range(1000, 2000);
 	ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode);
 
 	/* For loading, all the engines to load mode */
 	lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
-	usleep_range(1000, 10000);
+	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
+	usleep_range(1000, 2000);
 	lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD);
-	usleep_range(1000, 10000);
+	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
+	usleep_range(1000, 2000);
 
 	addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE;
 	i2c_smbus_write_i2c_block_data(client,
@@ -244,7 +247,10 @@ static int lp5521_configure(struct i2c_client *client,
 
 	lp5521_write(client, LP5521_REG_RESET, 0xff);
 
-	usleep_range(10000, 20000);
+	usleep_range(10000, 20000); /*
+				     * Exact value is not available. 10 - 20ms
+				     * appears to be enough for reset.
+				     */
 
 	/* Set all PWMs to direct control mode */
 	ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F);
@@ -262,8 +268,8 @@ static int lp5521_configure(struct i2c_client *client,
 	ret |= lp5521_write(client, LP5521_REG_ENABLE,
 			LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM |
 			LP5521_EXEC_RUN);
-	/* enable takes 500us */
-	usleep_range(500, 20000);
+	/* enable takes 500us. 1 - 2 ms leaves some margin */
+	usleep_range(1000, 2000);
 
 	return ret;
 }
@@ -316,7 +322,8 @@ static int lp5521_detect(struct i2c_client *client)
 			LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM);
 	if (ret)
 		return ret;
-	usleep_range(1000, 10000);
+	/* enable takes 500us. 1 - 2 ms leaves some margin */
+	usleep_range(1000, 2000);
 	ret = lp5521_read(client, LP5521_REG_ENABLE, &buf);
 	if (ret)
 		return ret;
@@ -704,9 +711,9 @@ static int lp5521_probe(struct i2c_client *client,
 
 	if (pdata->enable) {
 		pdata->enable(0);
-		usleep_range(1000, 10000);
+		usleep_range(1000, 2000); /* Keep enable down at least 1ms */
 		pdata->enable(1);
-		usleep_range(1000, 10000); /* Spec says min 500us */
+		usleep_range(1000, 2000); /* 500us abs min. */
 	}
 
 	ret = lp5521_detect(client);

From 2e4840edb7c485211993919a6a50d93c108198b8 Mon Sep 17 00:00:00 2001
From: Samu Onkalo <samu.p.onkalo@nokia.com>
Date: Wed, 24 Nov 2010 12:57:04 -0800
Subject: [PATCH 0946/1066] drivers/leds/leds-lp5523.c: adjust delays and add
 comments to them

Delays were little bit too long.  Adjust delay times and add some comments
to them.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/leds/leds-lp5523.c | 31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index 053e1f8b6c0b..4248d78cec37 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -205,11 +205,14 @@ static int lp5523_configure(struct i2c_client *client)
 
 	lp5523_write(client, LP5523_REG_RESET, 0xff);
 
-	usleep_range(10000, 100000);
+	usleep_range(10000, 20000); /*
+				     * Exact value is not available. 10 - 20ms
+				     * appears to be enough for reset.
+				     */
 
 	ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE);
-	/* Chip startup time after reset is 500 us */
-	usleep_range(1000, 10000);
+	/* Chip startup time is 500 us, 1 - 2 ms gives some margin */
+	usleep_range(1000, 2000);
 
 	ret |= lp5523_write(client, LP5523_REG_CONFIG,
 			    LP5523_AUTO_INC | LP5523_PWR_SAVE |
@@ -246,8 +249,8 @@ static int lp5523_configure(struct i2c_client *client)
 		return -1;
 	}
 
-	/* Wait 3ms and check the engine status */
-	usleep_range(3000, 20000);
+	/* Let the programs run for couple of ms and check the engine status */
+	usleep_range(3000, 6000);
 	lp5523_read(client, LP5523_REG_STATUS, &status);
 	status &= LP5523_ENG_STATUS_MASK;
 
@@ -452,10 +455,10 @@ static ssize_t lp5523_selftest(struct device *dev,
 	/* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
 	lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL,
 				    LP5523_EN_LEDTEST | 16);
-	usleep_range(3000, 10000);
+	usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */
 	ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
 	if (!(status & LP5523_LEDTEST_DONE))
-		usleep_range(3000, 10000);
+		usleep_range(3000, 6000); /* Was not ready. Wait little bit */
 
 	ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd);
 	vdd--;	/* There may be some fluctuation in measurement */
@@ -471,16 +474,16 @@ static ssize_t lp5523_selftest(struct device *dev,
 			chip->pdata->led_config[i].led_current);
 
 		lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff);
-		/* let current stabilize 2ms before measurements start */
-		usleep_range(2000, 10000);
+		/* let current stabilize 2 - 4ms before measurements start */
+		usleep_range(2000, 4000);
 		lp5523_write(chip->client,
 			     LP5523_REG_LED_TEST_CTRL,
 			     LP5523_EN_LEDTEST | i);
-		/* ledtest takes 2.7ms */
-		usleep_range(3000, 10000);
+		/* ADC conversion time is 2.7 ms typically */
+		usleep_range(3000, 6000);
 		ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
 		if (!(status & LP5523_LEDTEST_DONE))
-			usleep_range(3000, 10000);
+			usleep_range(3000, 6000);/* Was not ready. Wait. */
 		ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc);
 
 		if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
@@ -933,9 +936,9 @@ static int lp5523_probe(struct i2c_client *client,
 
 	if (pdata->enable) {
 		pdata->enable(0);
-		usleep_range(1000, 10000);
+		usleep_range(1000, 2000); /* Keep enable down at least 1ms */
 		pdata->enable(1);
-		usleep_range(1000, 10000); /* Spec says min 500us */
+		usleep_range(1000, 2000); /* 500us abs min. */
 	}
 
 	ret = lp5523_detect(client);

From 95ea8eec341c1fc881407c96114de7e4173c1b7c Mon Sep 17 00:00:00 2001
From: Samu Onkalo <samu.p.onkalo@nokia.com>
Date: Wed, 24 Nov 2010 12:57:05 -0800
Subject: [PATCH 0947/1066] drivers/leds/leds-lp5521.c: perform SW reset before
 detection

Chip detection may fail if the chip is in some odd state for example after
system restart.  Chip doesn't have HW reset line.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/leds/leds-lp5521.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 963c014be0bf..33facd0c45d1 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -245,13 +245,6 @@ static int lp5521_configure(struct i2c_client *client,
 
 	lp5521_init_engine(chip, attr_group);
 
-	lp5521_write(client, LP5521_REG_RESET, 0xff);
-
-	usleep_range(10000, 20000); /*
-				     * Exact value is not available. 10 - 20ms
-				     * appears to be enough for reset.
-				     */
-
 	/* Set all PWMs to direct control mode */
 	ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F);
 
@@ -716,6 +709,11 @@ static int lp5521_probe(struct i2c_client *client,
 		usleep_range(1000, 2000); /* 500us abs min. */
 	}
 
+	lp5521_write(client, LP5521_REG_RESET, 0xff);
+	usleep_range(10000, 20000); /*
+				     * Exact value is not available. 10 - 20ms
+				     * appears to be enough for reset.
+				     */
 	ret = lp5521_detect(client);
 
 	if (ret) {

From 11e7946f196e5fdde20584e3e58c60335ee3b3bc Mon Sep 17 00:00:00 2001
From: Samu Onkalo <samu.p.onkalo@nokia.com>
Date: Wed, 24 Nov 2010 12:57:05 -0800
Subject: [PATCH 0948/1066] drivers/leds/leds-lp5523.c: perform SW reset before
 detection

Chip detection may fail if the chip is in some odd state for example after
system restart.  Chip doesn't have HW reset line.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/leds/leds-lp5523.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index 4248d78cec37..0cc4ead2fd8b 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -203,13 +203,6 @@ static int lp5523_configure(struct i2c_client *client)
 		{ 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
 	};
 
-	lp5523_write(client, LP5523_REG_RESET, 0xff);
-
-	usleep_range(10000, 20000); /*
-				     * Exact value is not available. 10 - 20ms
-				     * appears to be enough for reset.
-				     */
-
 	ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE);
 	/* Chip startup time is 500 us, 1 - 2 ms gives some margin */
 	usleep_range(1000, 2000);
@@ -941,6 +934,11 @@ static int lp5523_probe(struct i2c_client *client,
 		usleep_range(1000, 2000); /* 500us abs min. */
 	}
 
+	lp5523_write(client, LP5523_REG_RESET, 0xff);
+	usleep_range(10000, 20000); /*
+				     * Exact value is not available. 10 - 20ms
+				     * appears to be enough for reset.
+				     */
 	ret = lp5523_detect(client);
 	if (ret)
 		goto fail2;

From b1dd693e5b9348bd68a80e679e03cf9c0973b01b Mon Sep 17 00:00:00 2001
From: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Date: Wed, 24 Nov 2010 12:57:06 -0800
Subject: [PATCH 0949/1066] memcg: avoid deadlock between move charge and
 try_charge()

__mem_cgroup_try_charge() can be called under down_write(&mmap_sem)(e.g.
mlock does it). This means it can cause deadlock if it races with move charge:

Ex.1)
                move charge             |        try charge
  --------------------------------------+------------------------------
    mem_cgroup_can_attach()             |  down_write(&mmap_sem)
      mc.moving_task = current          |    ..
      mem_cgroup_precharge_mc()         |  __mem_cgroup_try_charge()
        mem_cgroup_count_precharge()    |    prepare_to_wait()
          down_read(&mmap_sem)          |    if (mc.moving_task)
          -> cannot aquire the lock     |    -> true
                                        |      schedule()

Ex.2)
                move charge             |        try charge
  --------------------------------------+------------------------------
    mem_cgroup_can_attach()             |
      mc.moving_task = current          |
      mem_cgroup_precharge_mc()         |
        mem_cgroup_count_precharge()    |
          down_read(&mmap_sem)          |
          ..                            |
          up_read(&mmap_sem)            |
                                        |  down_write(&mmap_sem)
    mem_cgroup_move_task()              |    ..
      mem_cgroup_move_charge()          |  __mem_cgroup_try_charge()
        down_read(&mmap_sem)            |    prepare_to_wait()
        -> cannot aquire the lock       |    if (mc.moving_task)
                                        |    -> true
                                        |      schedule()

To avoid this deadlock, we do all the move charge works (both can_attach() and
attach()) under one mmap_sem section.
And after this patch, we set/clear mc.moving_task outside mc.lock, because we
use the lock only to check mc.from/to.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 43 ++++++++++++++++++++++++++-----------------
 1 file changed, 26 insertions(+), 17 deletions(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 62d1880f6992..26218df8d19d 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -278,13 +278,14 @@ enum move_type {
 
 /* "mc" and its members are protected by cgroup_mutex */
 static struct move_charge_struct {
-	spinlock_t	  lock; /* for from, to, moving_task */
+	spinlock_t	  lock; /* for from, to */
 	struct mem_cgroup *from;
 	struct mem_cgroup *to;
 	unsigned long precharge;
 	unsigned long moved_charge;
 	unsigned long moved_swap;
 	struct task_struct *moving_task;	/* a task moving charges */
+	struct mm_struct *mm;
 	wait_queue_head_t waitq;		/* a waitq for other context */
 } mc = {
 	.lock = __SPIN_LOCK_UNLOCKED(mc.lock),
@@ -4631,7 +4632,7 @@ static unsigned long mem_cgroup_count_precharge(struct mm_struct *mm)
 	unsigned long precharge;
 	struct vm_area_struct *vma;
 
-	down_read(&mm->mmap_sem);
+	/* We've already held the mmap_sem */
 	for (vma = mm->mmap; vma; vma = vma->vm_next) {
 		struct mm_walk mem_cgroup_count_precharge_walk = {
 			.pmd_entry = mem_cgroup_count_precharge_pte_range,
@@ -4643,7 +4644,6 @@ static unsigned long mem_cgroup_count_precharge(struct mm_struct *mm)
 		walk_page_range(vma->vm_start, vma->vm_end,
 					&mem_cgroup_count_precharge_walk);
 	}
-	up_read(&mm->mmap_sem);
 
 	precharge = mc.precharge;
 	mc.precharge = 0;
@@ -4694,11 +4694,16 @@ static void mem_cgroup_clear_mc(void)
 
 		mc.moved_swap = 0;
 	}
+	if (mc.mm) {
+		up_read(&mc.mm->mmap_sem);
+		mmput(mc.mm);
+	}
 	spin_lock(&mc.lock);
 	mc.from = NULL;
 	mc.to = NULL;
-	mc.moving_task = NULL;
 	spin_unlock(&mc.lock);
+	mc.moving_task = NULL;
+	mc.mm = NULL;
 	mem_cgroup_end_move(from);
 	memcg_oom_recover(from);
 	memcg_oom_recover(to);
@@ -4724,12 +4729,21 @@ static int mem_cgroup_can_attach(struct cgroup_subsys *ss,
 			return 0;
 		/* We move charges only when we move a owner of the mm */
 		if (mm->owner == p) {
+			/*
+			 * We do all the move charge works under one mmap_sem to
+			 * avoid deadlock with down_write(&mmap_sem)
+			 * -> try_charge() -> if (mc.moving_task) -> sleep.
+			 */
+			down_read(&mm->mmap_sem);
+
 			VM_BUG_ON(mc.from);
 			VM_BUG_ON(mc.to);
 			VM_BUG_ON(mc.precharge);
 			VM_BUG_ON(mc.moved_charge);
 			VM_BUG_ON(mc.moved_swap);
 			VM_BUG_ON(mc.moving_task);
+			VM_BUG_ON(mc.mm);
+
 			mem_cgroup_start_move(from);
 			spin_lock(&mc.lock);
 			mc.from = from;
@@ -4737,14 +4751,16 @@ static int mem_cgroup_can_attach(struct cgroup_subsys *ss,
 			mc.precharge = 0;
 			mc.moved_charge = 0;
 			mc.moved_swap = 0;
-			mc.moving_task = current;
 			spin_unlock(&mc.lock);
+			mc.moving_task = current;
+			mc.mm = mm;
 
 			ret = mem_cgroup_precharge_mc(mm);
 			if (ret)
 				mem_cgroup_clear_mc();
-		}
-		mmput(mm);
+			/* We call up_read() and mmput() in clear_mc(). */
+		} else
+			mmput(mm);
 	}
 	return ret;
 }
@@ -4832,7 +4848,7 @@ static void mem_cgroup_move_charge(struct mm_struct *mm)
 	struct vm_area_struct *vma;
 
 	lru_add_drain_all();
-	down_read(&mm->mmap_sem);
+	/* We've already held the mmap_sem */
 	for (vma = mm->mmap; vma; vma = vma->vm_next) {
 		int ret;
 		struct mm_walk mem_cgroup_move_charge_walk = {
@@ -4851,7 +4867,6 @@ static void mem_cgroup_move_charge(struct mm_struct *mm)
 			 */
 			break;
 	}
-	up_read(&mm->mmap_sem);
 }
 
 static void mem_cgroup_move_task(struct cgroup_subsys *ss,
@@ -4860,17 +4875,11 @@ static void mem_cgroup_move_task(struct cgroup_subsys *ss,
 				struct task_struct *p,
 				bool threadgroup)
 {
-	struct mm_struct *mm;
-
-	if (!mc.to)
+	if (!mc.mm)
 		/* no need to move charge */
 		return;
 
-	mm = get_task_mm(p);
-	if (mm) {
-		mem_cgroup_move_charge(mm);
-		mmput(mm);
-	}
+	mem_cgroup_move_charge(mc.mm);
 	mem_cgroup_clear_mc();
 }
 #else	/* !CONFIG_MMU */

From a42c390cfa0c2612459d7226ba11612847ca3a64 Mon Sep 17 00:00:00 2001
From: Michal Hocko <mhocko@suse.cz>
Date: Wed, 24 Nov 2010 12:57:08 -0800
Subject: [PATCH 0950/1066] cgroups: make swap accounting default behavior
 configurable

Swap accounting can be configured by CONFIG_CGROUP_MEM_RES_CTLR_SWAP
configuration option and then it is turned on by default.  There is a boot
option (noswapaccount) which can disable this feature.

This makes it hard for distributors to enable the configuration option as
this feature leads to a bigger memory consumption and this is a no-go for
general purpose distribution kernel.  On the other hand swap accounting
may be very usuful for some workloads.

This patch adds a new configuration option which controls the default
behavior (CGROUP_MEM_RES_CTLR_SWAP_ENABLED).  If the option is selected
then the feature is turned on by default.

It also adds a new boot parameter swapaccount[=1|0] which enhances the
original noswapaccount parameter semantic by means of enable/disable logic
(defaults to 1 if no value is provided to be still consistent with
noswapaccount).

The default behavior is unchanged (if CONFIG_CGROUP_MEM_RES_CTLR_SWAP is
enabled then CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is enabled as well)

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/kernel-parameters.txt |  5 +++++
 init/Kconfig                        | 13 +++++++++++++
 mm/memcontrol.c                     | 21 +++++++++++++++++++--
 3 files changed, 37 insertions(+), 2 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 92e83e53148f..cdd2a6e8a3b7 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2385,6 +2385,11 @@ and is between 256 and 4096 characters. It is defined in the file
 			improve throughput, but will also increase the
 			amount of memory reserved for use by the client.
 
+	swapaccount[=0|1]
+			[KNL] Enable accounting of swap in memory resource
+			controller if no parameter or 1 is given or disable
+			it if 0 is given (See Documentation/cgroups/memory.txt)
+
 	swiotlb=	[IA-64] Number of I/O TLB slabs
 
 	switches=	[HW,M68k]
diff --git a/init/Kconfig b/init/Kconfig
index 88c10468db46..c9728992a776 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -613,6 +613,19 @@ config CGROUP_MEM_RES_CTLR_SWAP
 	  if boot option "noswapaccount" is set, swap will not be accounted.
 	  Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
 	  size is 4096bytes, 512k per 1Gbytes of swap.
+config CGROUP_MEM_RES_CTLR_SWAP_ENABLED
+	bool "Memory Resource Controller Swap Extension enabled by default"
+	depends on CGROUP_MEM_RES_CTLR_SWAP
+	default y
+	help
+	  Memory Resource Controller Swap Extension comes with its price in
+	  a bigger memory consumption. General purpose distribution kernels
+	  which want to enable the feautre but keep it disabled by default
+	  and let the user enable it by swapaccount boot command line
+	  parameter should have this option unselected.
+	  For those who want to have the feature enabled by default should
+	  select this option (if, for some reason, they need to disable it
+	  then noswapaccount does the trick).
 
 menuconfig CGROUP_SCHED
 	bool "Group CPU scheduler"
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 26218df8d19d..7a22b4129211 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -61,7 +61,14 @@ struct mem_cgroup *root_mem_cgroup __read_mostly;
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
 /* Turned on only when memory cgroup is enabled && really_do_swap_account = 1 */
 int do_swap_account __read_mostly;
-static int really_do_swap_account __initdata = 1; /* for remember boot option*/
+
+/* for remember boot option*/
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED
+static int really_do_swap_account __initdata = 1;
+#else
+static int really_do_swap_account __initdata = 0;
+#endif
+
 #else
 #define do_swap_account		(0)
 #endif
@@ -4920,10 +4927,20 @@ struct cgroup_subsys mem_cgroup_subsys = {
 };
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
+static int __init enable_swap_account(char *s)
+{
+	/* consider enabled if no parameter or 1 is given */
+	if (!s || !strcmp(s, "1"))
+		really_do_swap_account = 1;
+	else if (!strcmp(s, "0"))
+		really_do_swap_account = 0;
+	return 1;
+}
+__setup("swapaccount", enable_swap_account);
 
 static int __init disable_swap_account(char *s)
 {
-	really_do_swap_account = 0;
+	enable_swap_account("0");
 	return 1;
 }
 __setup("noswapaccount", disable_swap_account);

From e9959f0f37160e1f5351af828cc981712b5066c1 Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Wed, 24 Nov 2010 12:57:09 -0800
Subject: [PATCH 0951/1066] mm/page_alloc.c: fix build_all_zonelist() where
 percpu_alloc() is wrongly called under stop_machine_run()

During memory hotplug, build_allzonelists() may be called under
stop_machine_run().  In this function, setup_zone_pageset() is called.
But it's bug because it will do page allocation under stop_machine_run().

Here is a report from Alok Kataria.

  BUG: sleeping function called from invalid context at kernel/mutex.c:94
  in_atomic(): 0, irqs_disabled(): 1, pid: 4, name: migration/0
  Pid: 4, comm: migration/0 Not tainted 2.6.35.6-45.fc14.x86_64 #1
  Call Trace:
   [<ffffffff8103d12b>] __might_sleep+0xeb/0xf0
   [<ffffffff81468245>] mutex_lock+0x24/0x50
   [<ffffffff8110eaa6>] pcpu_alloc+0x6d/0x7ee
   [<ffffffff81048888>] ? load_balance+0xbe/0x60e
   [<ffffffff8103a1b3>] ? rt_se_boosted+0x21/0x2f
   [<ffffffff8103e1cf>] ? dequeue_rt_stack+0x18b/0x1ed
   [<ffffffff8110f237>] __alloc_percpu+0x10/0x12
   [<ffffffff81465e22>] setup_zone_pageset+0x38/0xbe
   [<ffffffff810d6d81>] ? build_zonelists_node.clone.58+0x79/0x8c
   [<ffffffff81452539>] __build_all_zonelists+0x419/0x46c
   [<ffffffff8108ef01>] ? cpu_stopper_thread+0xb2/0x198
   [<ffffffff8108f075>] stop_machine_cpu_stop+0x8e/0xc5
   [<ffffffff8108efe7>] ? stop_machine_cpu_stop+0x0/0xc5
   [<ffffffff8108ef57>] cpu_stopper_thread+0x108/0x198
   [<ffffffff81467a37>] ? schedule+0x5b2/0x5cc
   [<ffffffff8108ee4f>] ? cpu_stopper_thread+0x0/0x198
   [<ffffffff81065f29>] kthread+0x7f/0x87
   [<ffffffff8100aae4>] kernel_thread_helper+0x4/0x10
   [<ffffffff81065eaa>] ? kthread+0x0/0x87
   [<ffffffff8100aae0>] ? kernel_thread_helper+0x0/0x10
  Built 5 zonelists in Node order, mobility grouping on.  Total pages: 289456
  Policy zone: Normal

This patch tries to fix the issue by moving setup_zone_pageset() out from
stop_machine_run(). It's obviously not necessary to be called under
stop_machine_run().

[akpm@linux-foundation.org: remove unneeded local]
Reported-by: Alok Kataria <akataria@vmware.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Petr Vandrovec <petr@vmware.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/page_alloc.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 07a654486f75..e4092704c1a9 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3008,14 +3008,6 @@ static __init_refok int __build_all_zonelists(void *data)
 		build_zonelist_cache(pgdat);
 	}
 
-#ifdef CONFIG_MEMORY_HOTPLUG
-	/* Setup real pagesets for the new zone */
-	if (data) {
-		struct zone *zone = data;
-		setup_zone_pageset(zone);
-	}
-#endif
-
 	/*
 	 * Initialize the boot_pagesets that are going to be used
 	 * for bootstrapping processors. The real pagesets for
@@ -3064,7 +3056,11 @@ void build_all_zonelists(void *data)
 	} else {
 		/* we have to stop all cpus to guarantee there is no user
 		   of zonelist */
-		stop_machine(__build_all_zonelists, data, NULL);
+#ifdef CONFIG_MEMORY_HOTPLUG
+		if (data)
+			setup_zone_pageset((struct zone *)data);
+#endif
+		stop_machine(__build_all_zonelists, NULL, NULL);
 		/* cpuset refresh routine should be here */
 	}
 	vm_total_pages = nr_free_pagecache_pages();

From 5f0af70a25593a9d53b87bc8d31902fb7cc63e40 Mon Sep 17 00:00:00 2001
From: David Sterba <dsterba@suse.cz>
Date: Wed, 24 Nov 2010 12:57:10 -0800
Subject: [PATCH 0952/1066] mm: remove call to find_vma in pagewalk for
 non-hugetlbfs

Commit d33b9f45 ("mm: hugetlb: fix hugepage memory leak in
walk_page_range()") introduces a check if a vma is a hugetlbfs one and
later in 5dc37642 ("mm hugetlb: add hugepage support to pagemap") it is
moved under #ifdef CONFIG_HUGETLB_PAGE but a needless find_vma call is
left behind and its result is not used anywhere else in the function.

The side-effect of caching vma for @addr inside walk->mm is neither
utilized in walk_page_range() nor in called functions.

Signed-off-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Matt Mackall <mpm@selenic.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/pagewalk.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/mm/pagewalk.c b/mm/pagewalk.c
index 8b1a2ce21ee5..38cc58b8b2b0 100644
--- a/mm/pagewalk.c
+++ b/mm/pagewalk.c
@@ -139,7 +139,6 @@ int walk_page_range(unsigned long addr, unsigned long end,
 	pgd_t *pgd;
 	unsigned long next;
 	int err = 0;
-	struct vm_area_struct *vma;
 
 	if (addr >= end)
 		return err;
@@ -149,15 +148,17 @@ int walk_page_range(unsigned long addr, unsigned long end,
 
 	pgd = pgd_offset(walk->mm, addr);
 	do {
+		struct vm_area_struct *uninitialized_var(vma);
+
 		next = pgd_addr_end(addr, end);
 
+#ifdef CONFIG_HUGETLB_PAGE
 		/*
 		 * handle hugetlb vma individually because pagetable walk for
 		 * the hugetlb page is dependent on the architecture and
 		 * we can't handled it in the same manner as non-huge pages.
 		 */
 		vma = find_vma(walk->mm, addr);
-#ifdef CONFIG_HUGETLB_PAGE
 		if (vma && is_vm_hugetlb_page(vma)) {
 			if (vma->vm_end < next)
 				next = vma->vm_end;

From ea251c1d5c481cda1cf6b0c9e4965f04a6cf2ffc Mon Sep 17 00:00:00 2001
From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Date: Wed, 24 Nov 2010 12:57:13 -0800
Subject: [PATCH 0953/1066] pagemap: set pagemap walk limit to PMD boundary

Currently one pagemap_read() call walks in PAGEMAP_WALK_SIZE bytes (== 512
pages.) But there is a corner case where walk_pmd_range() accidentally
runs over a VMA associated with a hugetlbfs file.

For example, when a process has mappings to VMAs as shown below:

  # cat /proc/<pid>/maps
  ...
  3a58f6d000-3a58f72000 rw-p 00000000 00:00 0
  7fbd51853000-7fbd51855000 rw-p 00000000 00:00 0
  7fbd5186c000-7fbd5186e000 rw-p 00000000 00:00 0
  7fbd51a00000-7fbd51c00000 rw-s 00000000 00:12 8614   /hugepages/test

then pagemap_read() goes into walk_pmd_range() path and walks in the range
0x7fbd51853000-0x7fbd51a53000, but the hugetlbfs VMA should be handled by
walk_hugetlb_range().  Otherwise PMD for the hugepage is considered bad
and cleared, which causes undesirable results.

This patch fixes it by separating pagemap walk range into one PMD.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/task_mmu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index da6b01d70f01..c126c83b9a45 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -706,6 +706,7 @@ static int pagemap_hugetlb_range(pte_t *pte, unsigned long hmask,
  * skip over unmapped regions.
  */
 #define PAGEMAP_WALK_SIZE	(PMD_SIZE)
+#define PAGEMAP_WALK_MASK	(PMD_MASK)
 static ssize_t pagemap_read(struct file *file, char __user *buf,
 			    size_t count, loff_t *ppos)
 {
@@ -776,7 +777,7 @@ static ssize_t pagemap_read(struct file *file, char __user *buf,
 		unsigned long end;
 
 		pm.pos = 0;
-		end = start_vaddr + PAGEMAP_WALK_SIZE;
+		end = (start_vaddr + PAGEMAP_WALK_SIZE) & PAGEMAP_WALK_MASK;
 		/* overflow ? */
 		if (end < start_vaddr || end > end_vaddr)
 			end = end_vaddr;

From b38eeaae267e4cd385ababcc2df82f6c46fc8633 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 24 Nov 2010 12:57:14 -0800
Subject: [PATCH 0954/1066] drivers/misc/isl29020.c: remove incorrect kfree in
 isl29020_remove()

struct als_data *data is not used in this driver at all.

Also add a missing ">" character for MODULE_AUTHOR.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/isl29020.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/misc/isl29020.c b/drivers/misc/isl29020.c
index ca47e6285075..307aada5fffe 100644
--- a/drivers/misc/isl29020.c
+++ b/drivers/misc/isl29020.c
@@ -183,9 +183,7 @@ static int  isl29020_probe(struct i2c_client *client,
 
 static int isl29020_remove(struct i2c_client *client)
 {
-	struct als_data *data = i2c_get_clientdata(client);
 	sysfs_remove_group(&client->dev.kobj, &m_als_gr);
-	kfree(data);
 	return 0;
 }
 
@@ -245,6 +243,6 @@ static void  __exit sensor_isl29020_exit(void)
 module_init(sensor_isl29020_init);
 module_exit(sensor_isl29020_exit);
 
-MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com");
+MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com>");
 MODULE_DESCRIPTION("Intersil isl29020 ALS Driver");
 MODULE_LICENSE("GPL v2");

From d1d73578e053b981c3611e5a211534290d24a5eb Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Wed, 24 Nov 2010 12:57:14 -0800
Subject: [PATCH 0955/1066] backlight: grab ops_lock before testing bd->ops
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

According to the comment describing ops_lock in the definition of struct
backlight_device and when comparing with other functions in backlight.c
the mutex must be hold when checking ops to be non-NULL.

Fixes a problem added by c835ee7f4154992e6 ("backlight: Add suspend/resume
support to the backlight core") in Jan 2009.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/backlight.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index e207810bba3c..08703299ef61 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -197,12 +197,12 @@ static int backlight_suspend(struct device *dev, pm_message_t state)
 {
 	struct backlight_device *bd = to_backlight_device(dev);
 
-	if (bd->ops->options & BL_CORE_SUSPENDRESUME) {
-		mutex_lock(&bd->ops_lock);
+	mutex_lock(&bd->ops_lock);
+	if (bd->ops && bd->ops->options & BL_CORE_SUSPENDRESUME) {
 		bd->props.state |= BL_CORE_SUSPENDED;
 		backlight_update_status(bd);
-		mutex_unlock(&bd->ops_lock);
 	}
+	mutex_unlock(&bd->ops_lock);
 
 	return 0;
 }
@@ -211,12 +211,12 @@ static int backlight_resume(struct device *dev)
 {
 	struct backlight_device *bd = to_backlight_device(dev);
 
-	if (bd->ops->options & BL_CORE_SUSPENDRESUME) {
-		mutex_lock(&bd->ops_lock);
+	mutex_lock(&bd->ops_lock);
+	if (bd->ops && bd->ops->options & BL_CORE_SUSPENDRESUME) {
 		bd->props.state &= ~BL_CORE_SUSPENDED;
 		backlight_update_status(bd);
-		mutex_unlock(&bd->ops_lock);
 	}
+	mutex_unlock(&bd->ops_lock);
 
 	return 0;
 }

From da905873effecd1c0166e578bc4b5006f041b18b Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker <fweisbec@gmail.com>
Date: Wed, 24 Nov 2010 12:57:15 -0800
Subject: [PATCH 0956/1066] reiserfs: fix inode mutex - reiserfs lock
 misordering

reiserfs_unpack() locks the inode mutex with reiserfs_mutex_lock_safe()
to protect against reiserfs lock dependency.  However this protection
requires to have the reiserfs lock to be locked.

This is the case if reiserfs_unpack() is called by reiserfs_ioctl but
not from reiserfs_quota_on() when it tries to unpack tails of quota
files.

Fix the ordering of the two locks in reiserfs_unpack() to fix this
issue.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reported-by: Markus Gapp <markus.gapp@gmx.net>
Reported-by: Jan Kara <jack@suse.cz>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: <stable@kernel.org>		[2.6.36.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/reiserfs/ioctl.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/fs/reiserfs/ioctl.c b/fs/reiserfs/ioctl.c
index bd9763e76bae..79265fdc317a 100644
--- a/fs/reiserfs/ioctl.c
+++ b/fs/reiserfs/ioctl.c
@@ -183,12 +183,11 @@ int reiserfs_unpack(struct inode *inode, struct file *filp)
 		return 0;
 	}
 
-	/* we need to make sure nobody is changing the file size beneath
-	 ** us
-	 */
-	reiserfs_mutex_lock_safe(&inode->i_mutex, inode->i_sb);
 	depth = reiserfs_write_lock_once(inode->i_sb);
 
+	/* we need to make sure nobody is changing the file size beneath us */
+	reiserfs_mutex_lock_safe(&inode->i_mutex, inode->i_sb);
+
 	write_from = inode->i_size & (blocksize - 1);
 	/* if we are on a block boundary, we are already unpacked.  */
 	if (write_from == 0) {

From 27af038494ef2f3f3a23aa040bfc1ea29d99d76d Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Wed, 24 Nov 2010 12:57:17 -0800
Subject: [PATCH 0957/1066] scripts: fix gfp-translate for recent changes to
 gfp.h

The recent changes to gfp.h to satisfy sparse broke scripts/gfp-translate.
This patch fixes it up to work with old and new versions of gfp.h .

[akpm@linux-foundation.org: use `grep -q', per WANG Cong]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Namhyung Kim <namhyung@gmail.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/gfp-translate | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/scripts/gfp-translate b/scripts/gfp-translate
index d81b968d864e..c9230e158a8f 100644
--- a/scripts/gfp-translate
+++ b/scripts/gfp-translate
@@ -63,7 +63,12 @@ fi
 
 # Extract GFP flags from the kernel source
 TMPFILE=`mktemp -t gfptranslate-XXXXXX` || exit 1
-grep "^#define __GFP" $SOURCE/include/linux/gfp.h | sed -e 's/(__force gfp_t)//' | sed -e 's/u)/)/' | grep -v GFP_BITS | sed -e 's/)\//) \//' > $TMPFILE
+grep -q ___GFP $SOURCE/include/linux/gfp.h
+if [ $? -eq 0 ]; then
+	grep "^#define ___GFP" $SOURCE/include/linux/gfp.h | sed -e 's/u$//' | grep -v GFP_BITS > $TMPFILE
+else
+	grep "^#define __GFP" $SOURCE/include/linux/gfp.h | sed -e 's/(__force gfp_t)//' | sed -e 's/u)/)/' | grep -v GFP_BITS | sed -e 's/)\//) \//' > $TMPFILE
+fi
 
 # Parse the flags
 IFS="

From 91d95fda8594ce5e0ccd81381ee7b956cf513c59 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Wed, 24 Nov 2010 12:57:18 -0800
Subject: [PATCH 0958/1066] arch/x86/include/asm/fixmap.h: mark
 __set_fixmap_offset as __always_inline

When compiling arch/x86/kernel/early_printk_mrst.c with i386
allmodconfig, gcc-4.1.0 generates an out-of-line copy of
__set_fixmap_offset() which contains a reference to
__this_fixmap_does_not_exist which the compiler cannot elide.

Marking __set_fixmap_offset() as __always_inline prevents this.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Feng Tang <feng.tang@intel.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/include/asm/fixmap.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 4d293dced62f..9479a037419f 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -216,8 +216,8 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr)
 }
 
 /* Return an pointer with offset calculated */
-static inline unsigned long __set_fixmap_offset(enum fixed_addresses idx,
-				phys_addr_t phys, pgprot_t flags)
+static __always_inline unsigned long
+__set_fixmap_offset(enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags)
 {
 	__set_fixmap(idx, phys, flags);
 	return fix_to_virt(idx) + (phys & (PAGE_SIZE - 1));

From f910043ce00791c06afc3789278447c4e88670ea Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Wed, 24 Nov 2010 11:09:03 -0800
Subject: [PATCH 0959/1066] OMAP: UART: don't resume UARTs that are not
 enabled.

Add additional check to omap_uart_resume_idle() so that only
enabled (specifically, idle-enabled) UARTs are allowed to resume.
This matches the existing check in prepare idle.

Without this patch, the system will hang if a board is
configured to register only some uarts instead of all of
them and PM is enabled.

Cc: Govindraj R. <govindraj.raja@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
[tony@atomide.com: updated description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/serial.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index becf0e38ef7e..bc934dbe3bf0 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -406,7 +406,7 @@ void omap_uart_resume_idle(int num)
 	struct omap_uart_state *uart;
 
 	list_for_each_entry(uart, &uart_list, node) {
-		if (num == uart->num) {
+		if (num == uart->num && uart->can_sleep) {
 			omap_uart_enable_clocks(uart);
 
 			/* Check for IO pad wakeup */

From 0d8e2d0dad98a693bad88aea6876ac8b94ad95c6 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 24 Nov 2010 16:49:05 -0700
Subject: [PATCH 0960/1066] OMAP2+: PM/serial: hold console semaphore while
 OMAP UARTs are disabled

The console semaphore must be held while the OMAP UART devices are
disabled, lest a console write cause an ARM abort (and a kernel crash)
when the underlying console device is inaccessible.  These crashes
only occur when the console is on one of the OMAP internal serial
ports.

While this problem has been latent in the PM idle loop for some time,
the crash was not triggerable with an unmodified kernel until commit
6f251e9db1093c187addc309b5f2f7fe3efd2995 ("OMAP: UART: omap_device
conversions, remove implicit 8520 assumptions").  After this patch, a
console write often occurs after the console UART has been disabled in
the idle loop, crashing the system.  Several users have encountered
this bug:

    http://www.mail-archive.com/linux-omap@vger.kernel.org/msg38396.html

    http://www.mail-archive.com/linux-omap@vger.kernel.org/msg36602.html

The same commit also introduced new code that disabled the UARTs
during init, in omap_serial_init_port().  The kernel will also crash
in this code when earlyconsole and extra debugging is enabled:

    http://www.mail-archive.com/linux-omap@vger.kernel.org/msg36411.html

The minimal fix for the -rc series is to hold the console semaphore
while the OMAP UARTs are disabled.  This is a somewhat overbroad fix,
since the console may not be located on an OMAP UART, as is the case
with the GPMC UART on Zoom3.  While it is technically possible to
determine which devices the console or earlyconsole is actually
running on, it is not a trivial problem to solve, and the code to do
so is not really appropriate for the -rc series.

The right long-term fix is to ensure that no code outside of the OMAP
serial driver can disable an OMAP UART.  As I understand it, code to
implement this is under development by TI.

This patch is a collaboration between Paul Walmsley <paul@pwsan.com>
and Tony Lindgren <tony@atomide.com>.  Thanks to Ming Lei
<tom.leiming@gmail.com> and Pramod <pramod.gurav@ti.com> for their
feedback on earlier versions of this patch.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Pramod <pramod.gurav@ti.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jean Pihet <jean.pihet@newoldbits.com>
Cc: Govindraj.R <govindraj.raja@ti.com>
---
 arch/arm/mach-omap2/pm24xx.c |  7 +++++++
 arch/arm/mach-omap2/pm34xx.c | 10 ++++++++++
 arch/arm/mach-omap2/serial.c |  5 +++++
 3 files changed, 22 insertions(+)

diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index a40457d81927..c85923e56b85 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -30,6 +30,7 @@
 #include <linux/irq.h>
 #include <linux/time.h>
 #include <linux/gpio.h>
+#include <linux/console.h>
 
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
@@ -118,6 +119,10 @@ static void omap2_enter_full_retention(void)
 	if (omap_irq_pending())
 		goto no_sleep;
 
+	/* Block console output in case it is on one of the OMAP UARTs */
+	if (try_acquire_console_sem())
+		goto no_sleep;
+
 	omap_uart_prepare_idle(0);
 	omap_uart_prepare_idle(1);
 	omap_uart_prepare_idle(2);
@@ -131,6 +136,8 @@ static void omap2_enter_full_retention(void)
 	omap_uart_resume_idle(1);
 	omap_uart_resume_idle(0);
 
+	release_console_sem();
+
 no_sleep:
 	if (omap2_pm_debug) {
 		unsigned long long tmp;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 75c0cd13ad8e..0ec8a04b7473 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -28,6 +28,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/console.h>
 
 #include <plat/sram.h>
 #include <plat/clockdomain.h>
@@ -385,6 +386,12 @@ void omap_sram_idle(void)
 		omap3_enable_io_chain();
 	}
 
+	/* Block console output in case it is on one of the OMAP UARTs */
+	if (per_next_state < PWRDM_POWER_ON ||
+	    core_next_state < PWRDM_POWER_ON)
+		if (try_acquire_console_sem())
+			goto console_still_active;
+
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(2);
@@ -463,6 +470,9 @@ void omap_sram_idle(void)
 		omap_uart_resume_idle(3);
 	}
 
+	release_console_sem();
+
+console_still_active:
 	/* Disable IO-PAD and IO-CHAIN wakeup */
 	if (omap3_has_io_wakeup() &&
 	    (per_next_state < PWRDM_POWER_ON ||
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index bc934dbe3bf0..d17960a1be25 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/serial_8250.h>
 #include <linux/pm_runtime.h>
+#include <linux/console.h>
 
 #ifdef CONFIG_SERIAL_OMAP
 #include <plat/omap-serial.h>
@@ -807,6 +808,8 @@ void __init omap_serial_init_port(int port)
 
 	oh->dev_attr = uart;
 
+	acquire_console_sem(); /* in case the earlycon is on the UART */
+
 	/*
 	 * Because of early UART probing, UART did not get idled
 	 * on init.  Now that omap_device is ready, ensure full idle
@@ -831,6 +834,8 @@ void __init omap_serial_init_port(int port)
 	omap_uart_block_sleep(uart);
 	uart->timeout = DEFAULT_TIMEOUT;
 
+	release_console_sem();
+
 	if ((cpu_is_omap34xx() && uart->padconf) ||
 	    (uart->wk_en && uart->wk_mask)) {
 		device_init_wakeup(&od->pdev.dev, true);

From 6fc50eafc49262e376455a480f9d793817fe74e2 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Tue, 16 Nov 2010 18:11:59 +0900
Subject: [PATCH 0961/1066] ARM: S3C2410: Adapt h1940-bluetooth to gpiolib
 changes

Replace in s3c_gpio_cfgpull with s3c_gpio_setpull.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2410/h1940-bluetooth.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 8aa2f1902a94..6b86a722a7db 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -77,13 +77,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
 
 	/* Configures BT serial port GPIOs */
 	s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
-	s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
-	s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
-	s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
-	s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
 
 
 	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,

From cce58ab380727169ef72b76481441f851e5850b0 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Mon, 15 Nov 2010 11:11:22 +0900
Subject: [PATCH 0962/1066] ARM: S3C24XX: Fix wrong s3c_gpio_cfgpull

This patch fixes wrong s3c_gpio_cfgpull with s3c_gpio_setpull.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c | 6 +++---
 arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c   | 6 +++---
 arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c    | 6 +++---
 3 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 9793544a6ace..704175b0573f 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 	} else {
 		s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
 		s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
 	}
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
index db9e9e477ec1..72457afd6255 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
@@ -31,8 +31,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
 	} else {
 		s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
 		s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
 	}
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index 8ea663a438bb..c3972b645d13 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
 	} else {
 		s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
 		s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
 	}
 }

From 8b8c87dee47ae7e41af95d03ca56b3a4633466a6 Mon Sep 17 00:00:00 2001
From: Darius Augulis <augulis.darius@gmail.com>
Date: Tue, 16 Nov 2010 18:08:50 +0900
Subject: [PATCH 0963/1066] ARM: S3C64XX: fix uart clock setup for
 mini6410/real6410

Don't rewrite clock config in UCON preconfigured by
bootloader. No need to set 10th bit in UCON because
[11:10] 2'b00 means source clock is PCLK too.
If set, console does not work if bootloader
has preconfigured [11:10] with 2'b00.
If not set, console works with any bootloader
config value (2'bxx).
More information about clock setup in UCON is available
in "S3C6410X RISC Microprocessor User's Manual,
Revision 1.20" p. 31-13 (Chapter 31.6.2
UART CONTROL REGISTER).

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-mini6410.c | 2 +-
 arch/arm/mach-s3c64xx/mach-real6410.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 249c62956471..89f35e02e883 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -45,7 +45,7 @@
 
 #include <video/platform_lcd.h>
 
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
 
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index f9ef9b5c5f5a..4957ab0a0d4a 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -46,7 +46,7 @@
 
 #include <video/platform_lcd.h>
 
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
 

From 18ad782c7fdbbb6b9db9e8d912fee1d783fe79e0 Mon Sep 17 00:00:00 2001
From: Abhilash Kesavan <a.kesavan@samsung.com>
Date: Thu, 21 Oct 2010 06:45:48 +0530
Subject: [PATCH 0964/1066] ARM: S3C24XX: Fix Demux error in UART3 irqs on
 S3C2443 and S3C2416

IRQ_S3C2443_UART3 is being used as the base when it should actually
be IRQ_S3C2443_RX3 on S3C2443 and S3C2416 for the UART3.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2416/irq.c | 2 +-
 arch/arm/mach-s3c2443/irq.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
index 084d121f368c..784485777896 100644
--- a/arch/arm/mach-s3c2416/irq.c
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -168,7 +168,7 @@ static struct irq_chip s3c2416_irq_dma = {
 
 static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
 {
-	s3c2416_irq_demux(IRQ_S3C2443_UART3, 3);
+	s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
 }
 
 #define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 0e0d693f3974..df2b8db49818 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -166,7 +166,7 @@ static struct irq_chip s3c2443_irq_dma = {
 
 static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
 {
-	s3c2443_irq_demux(IRQ_S3C2443_UART3, 3);
+	s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
 }
 
 #define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))

From 35bbcfe6dd283ab36b46ce7c0b79986acad7b20b Mon Sep 17 00:00:00 2001
From: Abhilash Kesavan <a.kesavan@samsung.com>
Date: Thu, 21 Oct 2010 06:45:48 +0530
Subject: [PATCH 0965/1066] ARM: S3C24XX: Fix UART3 submask on S3C2416 and
 S3C2443

The UART3 submask should be 0x7 (SUBSRCPND[26:24]).

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2416/irq.c | 3 +--
 arch/arm/mach-s3c2443/irq.c | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
index 784485777896..00174daf1526 100644
--- a/arch/arm/mach-s3c2416/irq.c
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -172,8 +172,7 @@ static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
 }
 
 #define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3	(0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
+#define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
 
 static void s3c2416_irq_uart3_mask(unsigned int irqno)
 {
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index df2b8db49818..893424767ce1 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -170,8 +170,7 @@ static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
 }
 
 #define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3	(0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
+#define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
 
 static void s3c2443_irq_uart3_mask(unsigned int irqno)
 {

From 9adf262a9f81489635f7868c9819cb864192811b Mon Sep 17 00:00:00 2001
From: Abhilash Kesavan <a.kesavan@samsung.com>
Date: Fri, 8 Oct 2010 09:07:19 +0530
Subject: [PATCH 0966/1066] ARM: S5PV210: Fix sysdev related warning messages

This patch fixes following warning messages when CONFIG_PM selected.

In file included from arch/arm/mach-s5pv210/mach-smdkv210.c:34:
arch/arm/plat-samsung/include/plat/pm.h:104: warning: 'struct sys_device'
declared inside parameter list
arch/arm/plat-samsung/include/plat/pm.h:104: warning: its scope is only this
definition or declaration, which is probably not what you want
arch/arm/plat-samsung/include/plat/pm.h:105: warning: 'struct sys_device'
declared inside parameter list

In file included from arch/arm/mach-s5pv210/mach-smdkc110.c:31:
arch/arm/plat-samsung/include/plat/pm.h:104: warning: 'struct sys_device'
declared inside parameter list
arch/arm/plat-samsung/include/plat/pm.h:104: warning: its scope is only this
definition or declaration, which is probably not what you want
arch/arm/plat-samsung/include/plat/pm.h:105: warning: 'struct sys_device'
declared inside parameter list

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5pv210/mach-smdkc110.c | 1 +
 arch/arm/mach-s5pv210/mach-smdkv210.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 0ad7924fe62e..5dd1681c069e 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/i2c.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index bcd7a5d53401..1fbc45b2a432 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

From 7167594a3da7dcc33203b85d62e519594baee390 Mon Sep 17 00:00:00 2001
From: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Date: Thu, 25 Nov 2010 00:08:01 -0200
Subject: [PATCH 0967/1066] ALSA: hda - Fix ALC660-VD/ALC861-VD
 capture/playback mixers

The mixer nids passed to alc_auto_create_input_ctls are wrong: 0x15 is
a pin, and 0x09 is the ADC on both ALC660-VD/ALC861-VD. Thus with
current code, input playback volume/switches and input source mixer
controls are not created, and recording doesn't work. Select correct
mixers, 0x0b (input playback mixer) and 0x22 (capture source mixer).

Reference: https://qa.mandriva.com/show_bug.cgi?id=61159

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index b0e6b8b47fa9..81a2a49b862c 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -16943,7 +16943,7 @@ static struct alc_config_preset alc861vd_presets[] = {
 static int alc861vd_auto_create_input_ctls(struct hda_codec *codec,
 						const struct auto_pin_cfg *cfg)
 {
-	return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x09, 0);
+	return alc_auto_create_input_ctls(codec, cfg, 0x0b, 0x22, 0);
 }
 
 

From e8129c642155616d9e2160a75f103e127c8c3708 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 25 Nov 2010 09:52:45 +0100
Subject: [PATCH 0968/1066] [S390] nmi: fix clock comparator revalidation

On each machine check all registers are revalidated. The save area for
the clock comparator however only contains the upper most seven bytes
of the former contents, if valid.
Therefore the machine check handler uses a store clock instruction to
get the current time and writes that to the clock comparator register
which in turn will generate an immediate timer interrupt.
However within the lowcore the expected time of the next timer
interrupt is stored. If the interrupt happens before that time the
handler won't be called. In turn the clock comparator won't be
reprogrammed and therefore the interrupt condition stays pending which
causes an interrupt loop until the expected time is reached.

On NOHZ machines this can result in unresponsive machines since the
time of the next expected interrupted can be a couple of days in the
future.

To fix this just revalidate the clock comparator register with the
expected value.
In addition the special handling for udelay must be changed as well.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/nmi.c | 10 ++++------
 arch/s390/lib/delay.c  | 14 +++++++++-----
 2 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index ac151399ef34..1995c1712fc8 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -95,7 +95,6 @@ EXPORT_SYMBOL_GPL(s390_handle_mcck);
 static int notrace s390_revalidate_registers(struct mci *mci)
 {
 	int kill_task;
-	u64 tmpclock;
 	u64 zero;
 	void *fpt_save_area, *fpt_creg_save_area;
 
@@ -214,11 +213,10 @@ static int notrace s390_revalidate_registers(struct mci *mci)
 			: "0", "cc");
 #endif
 	/* Revalidate clock comparator register */
-	asm volatile(
-		"	stck	0(%1)\n"
-		"	sckc	0(%1)"
-		: "=m" (tmpclock) : "a" (&(tmpclock)) : "cc", "memory");
-
+	if (S390_lowcore.clock_comparator == -1)
+		set_clock_comparator(S390_lowcore.mcck_clock);
+	else
+		set_clock_comparator(S390_lowcore.clock_comparator);
 	/* Check if old PSW is valid */
 	if (!mci->wp)
 		/*
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index 752b362bf651..7c37ec359ec2 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -29,17 +29,21 @@ static void __udelay_disabled(unsigned long long usecs)
 {
 	unsigned long mask, cr0, cr0_saved;
 	u64 clock_saved;
+	u64 end;
 
+	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+	end = get_clock() + (usecs << 12);
 	clock_saved = local_tick_disable();
-	set_clock_comparator(get_clock() + (usecs << 12));
 	__ctl_store(cr0_saved, 0, 0);
 	cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
 	__ctl_load(cr0 , 0, 0);
-	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
 	lockdep_off();
-	trace_hardirqs_on();
-	__load_psw_mask(mask);
-	local_irq_disable();
+	do {
+		set_clock_comparator(end);
+		trace_hardirqs_on();
+		__load_psw_mask(mask);
+		local_irq_disable();
+	} while (get_clock() < end);
 	lockdep_on();
 	__ctl_load(cr0_saved, 0, 0);
 	local_tick_enable(clock_saved);

From 4814a2b3c603438ed8c330c74b49aa662b1ede43 Mon Sep 17 00:00:00 2001
From: Jan Glauber <jang@linux.vnet.ibm.com>
Date: Thu, 25 Nov 2010 09:52:46 +0100
Subject: [PATCH 0969/1066] [S390] qdio: free indicator after reset is finished

The qdio device indicator is freed before the device is notified that
the indicator is reset. This sequence contains a race when the freed
indicator is used by a new device while the reset of the indicator is
still pending. Do the reset operation before freeing the indicator to
avoid that potential race.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/cio/qdio_thinint.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/cio/qdio_thinint.c b/drivers/s390/cio/qdio_thinint.c
index 752dbee06af5..5d9c66627b6e 100644
--- a/drivers/s390/cio/qdio_thinint.c
+++ b/drivers/s390/cio/qdio_thinint.c
@@ -292,8 +292,8 @@ void qdio_shutdown_thinint(struct qdio_irq *irq_ptr)
 		return;
 
 	/* reset adapter interrupt indicators */
-	put_indicator(irq_ptr->dsci);
 	set_subchannel_ind(irq_ptr, 1);
+	put_indicator(irq_ptr->dsci);
 }
 
 void __exit tiqdio_unregister_thinints(void)

From 11cd1a8b8cad1acfc140d9acce93762a9c140b20 Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Sun, 14 Nov 2010 17:31:52 +0200
Subject: [PATCH 0970/1066] vhost/net: fix rcu check usage

Incorrect rcu check was used as rcu isn't done
under mutex here. Force check to 1 for now,
to stop it from complaining.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 drivers/vhost/net.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 4b4da5b86ff9..f442668a1e52 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -129,8 +129,9 @@ static void handle_tx(struct vhost_net *net)
 	size_t hdr_size;
 	struct socket *sock;
 
-	sock = rcu_dereference_check(vq->private_data,
-				     lockdep_is_held(&vq->mutex));
+	/* TODO: check that we are running from vhost_worker?
+	 * Not sure it's worth it, it's straight-forward enough. */
+	sock = rcu_dereference_check(vq->private_data, 1);
 	if (!sock)
 		return;
 

From 846172dfe33c7ee07638e04f94dd90e21dfdc5ba Mon Sep 17 00:00:00 2001
From: Dmitry Artamonow <mad_soft@inbox.ru>
Date: Thu, 25 Nov 2010 00:46:15 +0300
Subject: [PATCH 0971/1066] ASoC: fix SND_PXA2XX_LIB Kconfig warning

Fix following warning observed when SND_PXA2XX_SOC is set and SND_ARM isn't:

warning: (SND_PXA2XX_AC97 && SOUND && !M68K && SND && SND_ARM && ARCH_PXA ||
SND_PXA2XX_SOC && SOUND && !M68K && SND && SND_SOC && ARCH_PXA) selects
SND_PXA2XX_LIB which has unmet direct dependencies (SOUND && !M68K && SND &&
SND_ARM)

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/pxa/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 37f191bbfdd9..580f48571303 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -1,6 +1,7 @@
 config SND_PXA2XX_SOC
 	tristate "SoC Audio for the Intel PXA2xx chip"
 	depends on ARCH_PXA
+	select SND_ARM
 	select SND_PXA2XX_LIB
 	help
 	  Say Y or M if you want to add support for codecs attached to

From 3b6bc354cb22b1069f88acdc7673d3476fbadfca Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 25 Nov 2010 17:23:55 +0800
Subject: [PATCH 0972/1066] ASoC: Call snd_soc_unregister_dais instead of
 snd_soc_unregister_dai in sh4_soc_dai_remove

We call snd_soc_register_dais() in sh4_soc_dai_probe(),
thus we should call snd_soc_unregister_dais() in sh4_soc_dai_remove().

Otherwise, we got "too many arguments to function 'snd_soc_unregister_dai'"
error message.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/sh/ssi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c
index 40bbdf1591dc..05192d97b377 100644
--- a/sound/soc/sh/ssi.c
+++ b/sound/soc/sh/ssi.c
@@ -387,7 +387,7 @@ static int __devinit sh4_soc_dai_probe(struct platform_device *pdev)
 
 static int __devexit sh4_soc_dai_remove(struct platform_device *pdev)
 {
-	snd_soc_unregister_dai(&pdev->dev, ARRAY_SIZE(sh4_ssi_dai));
+	snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(sh4_ssi_dai));
 	return 0;
 }
 

From 4e1f86509732ccc39938974db0612d14afbca953 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 25 Nov 2010 15:07:25 +0800
Subject: [PATCH 0973/1066] ASoC: efika-audio-fabric: fix resource leak in
 efika_fabric_init error path

Add missing platform_device_put() if platform_device_add() failed.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/fsl/efika-audio-fabric.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/fsl/efika-audio-fabric.c b/sound/soc/fsl/efika-audio-fabric.c
index 53251e6b5bd5..108b5d8bd0e9 100644
--- a/sound/soc/fsl/efika-audio-fabric.c
+++ b/sound/soc/fsl/efika-audio-fabric.c
@@ -76,6 +76,7 @@ static __init int efika_fabric_init(void)
 	rc = platform_device_add(pdev);
 	if (rc) {
 		pr_err("efika_fabric_init: platform_device_add() failed\n");
+		platform_device_put(pdev);
 		return -ENODEV;
 	}
 	return 0;

From 917dac0ff1754776b86967b0ec1750022d9c4265 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 25 Nov 2010 15:08:31 +0800
Subject: [PATCH 0974/1066] ASoC: pcm030-audio-fabric: fix resource leak in
 pcm030_fabric_init error path

Add missing platform_device_put() if platform_device_add() failed.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/fsl/pcm030-audio-fabric.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/fsl/pcm030-audio-fabric.c b/sound/soc/fsl/pcm030-audio-fabric.c
index 25f27ec1dd6e..ba4d85e317ed 100644
--- a/sound/soc/fsl/pcm030-audio-fabric.c
+++ b/sound/soc/fsl/pcm030-audio-fabric.c
@@ -76,6 +76,7 @@ static __init int pcm030_fabric_init(void)
 	rc = platform_device_add(pdev);
 	if (rc) {
 		pr_err("pcm030_fabric_init: platform_device_add() failed\n");
+		platform_device_put(pdev);
 		return -ENODEV;
 	}
 	return 0;

From b193deead8637291138a8c1c49753ee686fa5b17 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 25 Nov 2010 10:44:59 +0800
Subject: [PATCH 0975/1066] ASoC: snd-soc-afeb9260: remove unneeded
 platform_device_del in error path

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/atmel/snd-soc-afeb9260.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/atmel/snd-soc-afeb9260.c b/sound/soc/atmel/snd-soc-afeb9260.c
index e3d283561c19..86e0f8586dc3 100644
--- a/sound/soc/atmel/snd-soc-afeb9260.c
+++ b/sound/soc/atmel/snd-soc-afeb9260.c
@@ -167,7 +167,6 @@ static int __init afeb9260_soc_init(void)
 
 	return 0;
 err1:
-	platform_device_del(afeb9260_snd_device);
 	platform_device_put(afeb9260_snd_device);
 	return err;
 }

From c7a734e58ed237ecac2608a70eb31ba64e21c768 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 25 Nov 2010 15:11:03 +0800
Subject: [PATCH 0976/1066] ASoC: sam9g20_wm8731: fix resource leak in
 at91sam9g20ek_init error path

Fix the error path to properly free allocated resources.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/atmel/sam9g20_wm8731.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
index 032e17dd8fdb..e521ada80542 100644
--- a/sound/soc/atmel/sam9g20_wm8731.c
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -240,6 +240,7 @@ static int __init at91sam9g20ek_init(void)
 	if (!at91sam9g20ek_snd_device) {
 		printk(KERN_ERR "ASoC: Platform device allocation failed\n");
 		ret = -ENOMEM;
+		goto err_mclk;
 	}
 
 	platform_set_drvdata(at91sam9g20ek_snd_device,
@@ -248,11 +249,13 @@ static int __init at91sam9g20ek_init(void)
 	ret = platform_device_add(at91sam9g20ek_snd_device);
 	if (ret) {
 		printk(KERN_ERR "ASoC: Platform device allocation failed\n");
-		platform_device_put(at91sam9g20ek_snd_device);
+		goto err_device_add;
 	}
 
 	return ret;
 
+err_device_add:
+	platform_device_put(at91sam9g20ek_snd_device);
 err_mclk:
 	clk_put(mclk);
 	mclk = NULL;

From 14abca3dfc51c0a4f798183f131d63bfd6552bd4 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 25 Nov 2010 15:12:30 +0800
Subject: [PATCH 0977/1066] ASoC: simone: fix resource leak in simone_init
 error path

Fix the error path to properly free allocated resources.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/ep93xx/simone.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/sound/soc/ep93xx/simone.c b/sound/soc/ep93xx/simone.c
index 4b0d19913728..286817946c56 100644
--- a/sound/soc/ep93xx/simone.c
+++ b/sound/soc/ep93xx/simone.c
@@ -54,24 +54,26 @@ static int __init simone_init(void)
 
 	ret = platform_device_add(simone_snd_ac97_device);
 	if (ret)
-		goto fail;
+		goto fail1;
 
 	simone_snd_device = platform_device_alloc("soc-audio", -1);
 	if (!simone_snd_device) {
 		ret = -ENOMEM;
-		goto fail;
+		goto fail2;
 	}
 
 	platform_set_drvdata(simone_snd_device, &snd_soc_simone);
 	ret = platform_device_add(simone_snd_device);
-	if (ret) {
-		platform_device_put(simone_snd_device);
-		goto fail;
-	}
+	if (ret)
+		goto fail3;
 
-	return ret;
+	return 0;
 
-fail:
+fail3:
+	platform_device_put(simone_snd_device);
+fail2:
+	platform_device_del(simone_snd_ac97_device);
+fail1:
 	platform_device_put(simone_snd_ac97_device);
 	return ret;
 }

From ac8f924af555573e29b126ac5cef4fdd122ae517 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 25 Nov 2010 15:13:09 +0800
Subject: [PATCH 0978/1066] ASoC: imx-ssi: fix resource leak

Fix imx_ssi_probe() error path and imx_ssi_remove() to properly free
allocated resources.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/imx/imx-ssi.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c
index d2d98c75ee8a..390b6ffc2658 100644
--- a/sound/soc/imx/imx-ssi.c
+++ b/sound/soc/imx/imx-ssi.c
@@ -679,8 +679,11 @@ static int imx_ssi_probe(struct platform_device *pdev)
 	}
 
 	ssi->soc_platform_pdev_fiq = platform_device_alloc("imx-fiq-pcm-audio", pdev->id);
-	if (!ssi->soc_platform_pdev_fiq)
+	if (!ssi->soc_platform_pdev_fiq) {
+		ret = -ENOMEM;
 		goto failed_pdev_fiq_alloc;
+	}
+
 	platform_set_drvdata(ssi->soc_platform_pdev_fiq, ssi);
 	ret = platform_device_add(ssi->soc_platform_pdev_fiq);
 	if (ret) {
@@ -689,8 +692,11 @@ static int imx_ssi_probe(struct platform_device *pdev)
 	}
 
 	ssi->soc_platform_pdev = platform_device_alloc("imx-pcm-audio", pdev->id);
-	if (!ssi->soc_platform_pdev)
+	if (!ssi->soc_platform_pdev) {
+		ret = -ENOMEM;
 		goto failed_pdev_alloc;
+	}
+
 	platform_set_drvdata(ssi->soc_platform_pdev, ssi);
 	ret = platform_device_add(ssi->soc_platform_pdev);
 	if (ret) {
@@ -703,6 +709,7 @@ static int imx_ssi_probe(struct platform_device *pdev)
 failed_pdev_add:
 	platform_device_put(ssi->soc_platform_pdev);
 failed_pdev_alloc:
+	platform_device_del(ssi->soc_platform_pdev_fiq);
 failed_pdev_fiq_add:
 	platform_device_put(ssi->soc_platform_pdev_fiq);
 failed_pdev_fiq_alloc:
@@ -726,8 +733,8 @@ static int __devexit imx_ssi_remove(struct platform_device *pdev)
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	struct imx_ssi *ssi = platform_get_drvdata(pdev);
 
-	platform_device_del(ssi->soc_platform_pdev);
-	platform_device_put(ssi->soc_platform_pdev);
+	platform_device_unregister(ssi->soc_platform_pdev);
+	platform_device_unregister(ssi->soc_platform_pdev_fiq);
 
 	snd_soc_unregister_dai(&pdev->dev);
 

From 09de9533348632fbbf32ce618f669882aa718817 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 25 Nov 2010 15:14:03 +0800
Subject: [PATCH 0979/1066] ASoC: phycore-ac97: fix resource leak

Fix imx_phycore_init() error path and imx_phycore_exit() to properly free
allocated resources.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/imx/phycore-ac97.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

diff --git a/sound/soc/imx/phycore-ac97.c b/sound/soc/imx/phycore-ac97.c
index 39f23734781a..9eabc28667e6 100644
--- a/sound/soc/imx/phycore-ac97.c
+++ b/sound/soc/imx/phycore-ac97.c
@@ -43,6 +43,7 @@ static struct snd_soc_card imx_phycore = {
 	.num_links	= ARRAY_SIZE(imx_phycore_dai_ac97),
 };
 
+static struct platform_device *imx_phycore_snd_ac97_device;
 static struct platform_device *imx_phycore_snd_device;
 
 static int __init imx_phycore_init(void)
@@ -53,29 +54,42 @@ static int __init imx_phycore_init(void)
 		/* return happy. We might run on a totally different machine */
 		return 0;
 
-	imx_phycore_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!imx_phycore_snd_device)
+	imx_phycore_snd_ac97_device = platform_device_alloc("soc-audio", -1);
+	if (!imx_phycore_snd_ac97_device)
 		return -ENOMEM;
 
-	platform_set_drvdata(imx_phycore_snd_device, &imx_phycore);
-	ret = platform_device_add(imx_phycore_snd_device);
+	platform_set_drvdata(imx_phycore_snd_ac97_device, &imx_phycore);
+	ret = platform_device_add(imx_phycore_snd_ac97_device);
+	if (ret)
+		goto fail1;
 
 	imx_phycore_snd_device = platform_device_alloc("wm9712-codec", -1);
-	if (!imx_phycore_snd_device)
-		return -ENOMEM;
+	if (!imx_phycore_snd_device) {
+		ret = -ENOMEM;
+		goto fail2;
+	}
 	ret = platform_device_add(imx_phycore_snd_device);
 
 	if (ret) {
 		printk(KERN_ERR "ASoC: Platform device allocation failed\n");
-		platform_device_put(imx_phycore_snd_device);
+		goto fail3;
 	}
 
+	return 0;
+
+fail3:
+	platform_device_put(imx_phycore_snd_device);
+fail2:
+	platform_device_del(imx_phycore_snd_ac97_device);
+fail1:
+	platform_device_put(imx_phycore_snd_ac97_device);
 	return ret;
 }
 
 static void __exit imx_phycore_exit(void)
 {
 	platform_device_unregister(imx_phycore_snd_device);
+	platform_device_unregister(imx_phycore_snd_ac97_device);
 }
 
 late_initcall(imx_phycore_init);

From 8b6b30ab665d3bbb23180c39f6215e6f64516ed0 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 25 Nov 2010 11:33:14 +0800
Subject: [PATCH 0980/1066] ASoC: davinci-vcif - fix a memory leak

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/davinci/davinci-vcif.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/soc/davinci/davinci-vcif.c b/sound/soc/davinci/davinci-vcif.c
index fb4cc1edf339..9d2afccc3a2d 100644
--- a/sound/soc/davinci/davinci-vcif.c
+++ b/sound/soc/davinci/davinci-vcif.c
@@ -247,7 +247,10 @@ fail:
 
 static int davinci_vcif_remove(struct platform_device *pdev)
 {
+	struct davinci_vcif_dev *davinci_vcif_dev = dev_get_drvdata(&pdev->dev);
+
 	snd_soc_unregister_dai(&pdev->dev);
+	kfree(davinci_vcif_dev);
 
 	return 0;
 }

From 5989f11ba11c72f98d57580b991418d9ff6a207d Mon Sep 17 00:00:00 2001
From: Raoul Bhatia <r.bhatia@ipax.at>
Date: Thu, 25 Nov 2010 17:32:47 +0100
Subject: [PATCH 0981/1066] EDAC: Fix typos in Documentation/edac.txt

Fix trivial typos in edac.txt

Signed-off-by: Raoul Bhatia <r.bhatia@ipax.at>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 Documentation/edac.txt | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 0b875e8da969..9ee774de57cd 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -196,7 +196,7 @@ csrow3.
 The representation of the above is reflected in the directory tree
 in EDAC's sysfs interface. Starting in directory
 /sys/devices/system/edac/mc each memory controller will be represented
-by its own 'mcX' directory, where 'X" is the index of the MC.
+by its own 'mcX' directory, where 'X' is the index of the MC.
 
 
 	..../edac/mc/
@@ -207,7 +207,7 @@ by its own 'mcX' directory, where 'X" is the index of the MC.
 		   ....
 
 Under each 'mcX' directory each 'csrowX' is again represented by a
-'csrowX', where 'X" is the csrow index:
+'csrowX', where 'X' is the csrow index:
 
 
 	.../mc/mc0/
@@ -232,7 +232,7 @@ EDAC control and attribute files.
 
 
 In 'mcX' directories are EDAC control and attribute files for
-this 'X" instance of the memory controllers:
+this 'X' instance of the memory controllers:
 
 
 Counter reset control file:
@@ -343,7 +343,7 @@ Sdram memory scrubbing rate:
 'csrowX' DIRECTORIES
 
 In the 'csrowX' directories are EDAC control and attribute files for
-this 'X" instance of csrow:
+this 'X' instance of csrow:
 
 
 Total Uncorrectable Errors count attribute file:

From fe99b55994f08d321cc5f621c3634b1de4961d01 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 24 Nov 2010 22:40:59 +0800
Subject: [PATCH 0982/1066] ASoC: tlv320aic3x - fix variable may be used
 uninitialized warning

If aic3x_read failed , val is used uninitialized.
Fix it by initializing val to 0.

This patch fixes below compile warning:
sound/soc/codecs/tlv320aic3x.c: In function 'aic3x_get_gpio':
sound/soc/codecs/tlv320aic3x.c:1183: warning: 'val' may be used uninitialized in this function
sound/soc/codecs/tlv320aic3x.c: In function 'aic3x_headset_detected':
sound/soc/codecs/tlv320aic3x.c:1211: warning: 'val' may be used uninitialized in this function
sound/soc/codecs/tlv320aic3x.c: In function 'aic3x_button_pressed':
sound/soc/codecs/tlv320aic3x.c:1219: warning: 'val' may be used uninitialized in this function

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/tlv320aic3x.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index fc687790188b..77b8f9ae29be 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -1176,7 +1176,7 @@ EXPORT_SYMBOL_GPL(aic3x_set_gpio);
 int aic3x_get_gpio(struct snd_soc_codec *codec, int gpio)
 {
 	u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG;
-	u8 val, bit = gpio ? 2: 1;
+	u8 val = 0, bit = gpio ? 2 : 1;
 
 	aic3x_read(codec, reg, &val);
 	return (val >> bit) & 1;
@@ -1204,7 +1204,7 @@ EXPORT_SYMBOL_GPL(aic3x_set_headset_detection);
 
 int aic3x_headset_detected(struct snd_soc_codec *codec)
 {
-	u8 val;
+	u8 val = 0;
 	aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val);
 	return (val >> 4) & 1;
 }
@@ -1212,7 +1212,7 @@ EXPORT_SYMBOL_GPL(aic3x_headset_detected);
 
 int aic3x_button_pressed(struct snd_soc_codec *codec)
 {
-	u8 val;
+	u8 val = 0;
 	aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val);
 	return (val >> 5) & 1;
 }

From 25436180ee8bed6740f29d92c2030c759885c147 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 24 Nov 2010 22:24:01 +0800
Subject: [PATCH 0983/1066] ASoC: Fix resource reclaim for osk5912

In current implementation, there are resources leak in the error path.
This patch properly reclaims the allocated resources in the error path.

Also adds a missing clk_put in osk_soc_exit.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/omap/osk5912.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c
index f0e662556428..65ae00e976ef 100644
--- a/sound/soc/omap/osk5912.c
+++ b/sound/soc/omap/osk5912.c
@@ -177,7 +177,8 @@ static int __init osk_soc_init(void)
 	tlv320aic23_mclk = clk_get(dev, "mclk");
 	if (IS_ERR(tlv320aic23_mclk)) {
 		printk(KERN_ERR "Could not get mclk clock\n");
-		return -ENODEV;
+		err = PTR_ERR(tlv320aic23_mclk);
+		goto err2;
 	}
 
 	/*
@@ -188,7 +189,7 @@ static int __init osk_soc_init(void)
 		if (clk_set_rate(tlv320aic23_mclk, CODEC_CLOCK)) {
 			printk(KERN_ERR "Cannot set MCLK for AIC23 CODEC\n");
 			err = -ECANCELED;
-			goto err1;
+			goto err3;
 		}
 	}
 
@@ -196,9 +197,12 @@ static int __init osk_soc_init(void)
 	       (uint) clk_get_rate(tlv320aic23_mclk), CODEC_CLOCK);
 
 	return 0;
-err1:
+
+err3:
 	clk_put(tlv320aic23_mclk);
+err2:
 	platform_device_del(osk_snd_device);
+err1:
 	platform_device_put(osk_snd_device);
 
 	return err;
@@ -207,6 +211,7 @@ err1:
 
 static void __exit osk_soc_exit(void)
 {
+	clk_put(tlv320aic23_mclk);
 	platform_device_unregister(osk_snd_device);
 }
 

From 4917b284db8607e414c334317b7d15239854d39c Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 22 Nov 2010 12:48:34 -0800
Subject: [PATCH 0984/1066] dmar, x86: Use function stubs when
 CONFIG_INTR_REMAP is disabled

The stubs for CONFIG_INTR_REMAP disabled need to be functions
instead of values to eliminate build warnings.

 arch/x86/kernel/apic/apic.c: In function 'lapic_suspend':
 arch/x86/kernel/apic/apic.c:2060:3: warning: statement with no effect
 arch/x86/kernel/apic/apic.c: In function 'lapic_resume':
 arch/x86/kernel/apic/apic.c:2137:3: warning: statement with no effect

Reported-and-Tested-by: Fabio Comolli <fabio.comolli@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
LKML-Reference: <20101122124834.74429004.randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/dmar.h | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/include/linux/dmar.h b/include/linux/dmar.h
index a7d9dc21391d..7b776d71d36d 100644
--- a/include/linux/dmar.h
+++ b/include/linux/dmar.h
@@ -175,10 +175,21 @@ static inline int set_msi_sid(struct irte *irte, struct pci_dev *dev)
 	return 0;
 }
 
-#define enable_intr_remapping(mode)	(-1)
-#define disable_intr_remapping()	(0)
-#define reenable_intr_remapping(mode)	(0)
 #define intr_remapping_enabled		(0)
+
+static inline int enable_intr_remapping(int eim)
+{
+	return -1;
+}
+
+static inline void disable_intr_remapping(void)
+{
+}
+
+static inline int reenable_intr_remapping(int eim)
+{
+	return 0;
+}
 #endif
 
 /* Can't use the common MSI interrupt functions

From dddd3379a619a4cb8247bfd3c94ca9ae3797aa2e Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 24 Nov 2010 10:05:55 +0100
Subject: [PATCH 0985/1066] perf: Fix inherit vs. context rotation bug

It was found that sometimes children of tasks with inherited events had
one extra event. Eventually it turned out to be due to the list rotation
no being exclusive with the list iteration in the inheritance code.

Cure this by temporarily disabling the rotation while we inherit the events.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/perf_event.h |  1 +
 kernel/perf_event.c        | 22 ++++++++++++++++++++--
 2 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 40150f345982..142e3d6042c7 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -850,6 +850,7 @@ struct perf_event_context {
 	int				nr_active;
 	int				is_active;
 	int				nr_stat;
+	int				rotate_disable;
 	atomic_t			refcount;
 	struct task_struct		*task;
 
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 671f6c8c8a32..f365dd8ef8b0 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -1622,8 +1622,12 @@ static void rotate_ctx(struct perf_event_context *ctx)
 {
 	raw_spin_lock(&ctx->lock);
 
-	/* Rotate the first entry last of non-pinned groups */
-	list_rotate_left(&ctx->flexible_groups);
+	/*
+	 * Rotate the first entry last of non-pinned groups. Rotation might be
+	 * disabled by the inheritance code.
+	 */
+	if (!ctx->rotate_disable)
+		list_rotate_left(&ctx->flexible_groups);
 
 	raw_spin_unlock(&ctx->lock);
 }
@@ -6162,6 +6166,7 @@ int perf_event_init_context(struct task_struct *child, int ctxn)
 	struct perf_event *event;
 	struct task_struct *parent = current;
 	int inherited_all = 1;
+	unsigned long flags;
 	int ret = 0;
 
 	child->perf_event_ctxp[ctxn] = NULL;
@@ -6202,6 +6207,15 @@ int perf_event_init_context(struct task_struct *child, int ctxn)
 			break;
 	}
 
+	/*
+	 * We can't hold ctx->lock when iterating the ->flexible_group list due
+	 * to allocations, but we need to prevent rotation because
+	 * rotate_ctx() will change the list from interrupt context.
+	 */
+	raw_spin_lock_irqsave(&parent_ctx->lock, flags);
+	parent_ctx->rotate_disable = 1;
+	raw_spin_unlock_irqrestore(&parent_ctx->lock, flags);
+
 	list_for_each_entry(event, &parent_ctx->flexible_groups, group_entry) {
 		ret = inherit_task_group(event, parent, parent_ctx,
 					 child, ctxn, &inherited_all);
@@ -6209,6 +6223,10 @@ int perf_event_init_context(struct task_struct *child, int ctxn)
 			break;
 	}
 
+	raw_spin_lock_irqsave(&parent_ctx->lock, flags);
+	parent_ctx->rotate_disable = 0;
+	raw_spin_unlock_irqrestore(&parent_ctx->lock, flags);
+
 	child_ctx = child->perf_event_ctxp[ctxn];
 
 	if (child_ctx && inherited_all) {

From 33c6d6a7ad0ffab9b1b15f8e4107a2af072a05a0 Mon Sep 17 00:00:00 2001
From: Don Zickus <dzickus@redhat.com>
Date: Mon, 22 Nov 2010 16:55:23 -0500
Subject: [PATCH 0986/1066] x86, perf, nmi: Disable perf if counters are not
 accessible

In a kvm virt guests, the perf counters are not emulated.  Instead they
return zero on a rdmsrl. The perf nmi handler uses the fact that crossing
a zero means the counter overflowed (for those counters that do not have
specific interrupt bits). Therefore on kvm guests, perf will swallow all
NMIs thinking the counters overflowed.

This causes problems for subsystems like kgdb which needs NMIs to do its
magic. This problem was discovered by running kgdb tests.

The solution is to write garbage into a perf counter during the
initialization and hopefully reading back the same number.  On kvm
guests, the value will be read back as zero and we disable perf as
a result.

Reported-by: Jason Wessel <jason.wessel@windriver.com>
Patch-inspired-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1290462923-30734-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_event.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index ed6310183efb..6d75b9145b13 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -381,6 +381,20 @@ static void release_pmc_hardware(void) {}
 
 #endif
 
+static bool check_hw_exists(void)
+{
+	u64 val, val_new = 0;
+	int ret = 0;
+
+	val = 0xabcdUL;
+	ret |= checking_wrmsrl(x86_pmu.perfctr, val);
+	ret |= rdmsrl_safe(x86_pmu.perfctr, &val_new);
+	if (ret || val != val_new)
+		return false;
+
+	return true;
+}
+
 static void reserve_ds_buffers(void);
 static void release_ds_buffers(void);
 
@@ -1372,6 +1386,12 @@ void __init init_hw_perf_events(void)
 
 	pmu_check_apic();
 
+	/* sanity check that the hardware exists or is emulated */
+	if (!check_hw_exists()) {
+		pr_cont("Broken PMU hardware detected, software events only.\n");
+		return;
+	}
+
 	pr_cont("%s PMU driver.\n", x86_pmu.name);
 
 	if (x86_pmu.quirks)

From cc2067a51424dd25c10c1b1230b4222d8baec94d Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Tue, 16 Nov 2010 21:49:01 +0100
Subject: [PATCH 0987/1066] perf, x86: Fixup Kconfig deps

This leads to a Kconfig dep inversion, x86 selects PERF_EVENT (due to
a hw_breakpoint dep) but doesn't unconditionally provide
HAVE_PERF_EVENT.

(This can cause build failures on M386/M486 kernel .config's.)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101117222055.982965150@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e8327686d3c5..e330da21b84f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -21,7 +21,7 @@ config X86
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_IDE
 	select HAVE_OPROFILE
-	select HAVE_PERF_EVENTS if (!M386 && !M486)
+	select HAVE_PERF_EVENTS
 	select HAVE_IRQ_WORK
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES

From ee6dcfa40a50fe12a3ae0fb4d2653c66c3ed6556 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Fri, 26 Nov 2010 13:49:04 +0100
Subject: [PATCH 0988/1066] perf: Fix the software context switch counter

Stephane noticed that because the perf_sw_event() call is inside the
perf_event_task_sched_out() call it won't get called unless we
have a per-task counter.

Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/perf_event.h | 29 +++++++++++++++--------------
 kernel/perf_event.c        |  2 --
 2 files changed, 15 insertions(+), 16 deletions(-)

diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 142e3d6042c7..de2c41758e29 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -909,20 +909,6 @@ extern int perf_num_counters(void);
 extern const char *perf_pmu_name(void);
 extern void __perf_event_task_sched_in(struct task_struct *task);
 extern void __perf_event_task_sched_out(struct task_struct *task, struct task_struct *next);
-
-extern atomic_t perf_task_events;
-
-static inline void perf_event_task_sched_in(struct task_struct *task)
-{
-	COND_STMT(&perf_task_events, __perf_event_task_sched_in(task));
-}
-
-static inline
-void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next)
-{
-	COND_STMT(&perf_task_events, __perf_event_task_sched_out(task, next));
-}
-
 extern int perf_event_init_task(struct task_struct *child);
 extern void perf_event_exit_task(struct task_struct *child);
 extern void perf_event_free_task(struct task_struct *task);
@@ -1031,6 +1017,21 @@ have_event:
 	__perf_sw_event(event_id, nr, nmi, regs, addr);
 }
 
+extern atomic_t perf_task_events;
+
+static inline void perf_event_task_sched_in(struct task_struct *task)
+{
+	COND_STMT(&perf_task_events, __perf_event_task_sched_in(task));
+}
+
+static inline
+void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next)
+{
+	perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0);
+
+	COND_STMT(&perf_task_events, __perf_event_task_sched_out(task, next));
+}
+
 extern void perf_event_mmap(struct vm_area_struct *vma);
 extern struct perf_guest_info_callbacks *perf_guest_cbs;
 extern int perf_register_guest_info_callbacks(struct perf_guest_info_callbacks *callbacks);
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index f365dd8ef8b0..eac7e3364335 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -1287,8 +1287,6 @@ void __perf_event_task_sched_out(struct task_struct *task,
 {
 	int ctxn;
 
-	perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0);
-
 	for_each_task_context_nr(ctxn)
 		perf_event_context_sched_out(task, ctxn, next);
 }

From 5a8cfb4e8ae317d283f84122ed20faa069c5e0c4 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Fri, 26 Nov 2010 17:11:18 +0100
Subject: [PATCH 0989/1066] ALSA: hda - Use ALC_INIT_DEFAULT for really default
 initialization

When SKU assid gives no valid bits for 0x38, the driver didn't take
any action, so far.  This resulted in the missing initialization for
external amps, etc, thus the silent output in the end.

Especially users hit this problem on ALC888 newly since 2.6.35,
where the driver doesn't force to use ALC_INIT_DEFAULT any more.

This patch sets the default initialization scheme to use
ALC_INIT_DEFAULT when no valid bits are set for SKU assid.

Reference:
	https://bugzilla.redhat.com/show_bug.cgi?id=657388

Reported-and-tested-by: Kyle McMartin <kyle@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 81a2a49b862c..886d7c72936e 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1614,6 +1614,7 @@ do_sku:
 		spec->init_amp = ALC_INIT_GPIO3;
 		break;
 	case 5:
+	default:
 		spec->init_amp = ALC_INIT_DEFAULT;
 		break;
 	}

From 55a61d1d06a3dc443d0db8aaa613365dcb83b98a Mon Sep 17 00:00:00 2001
From: Josef Bacik <josef@redhat.com>
Date: Mon, 22 Nov 2010 18:50:32 +0000
Subject: [PATCH 0990/1066] Btrfs: fix typo in fallocate to make it honor
 actual size

There is a typo in __btrfs_prealloc_file_range() where we set the i_size to
actual_len/cur_offset, and then just set it to cur_offset again, and do the same
with btrfs_ordered_update_i_size().  This fixes it back to keeping i_size in a
local variable and then updating i_size properly.  Tested this with

xfs_io -F -f -c "falloc 0 1" -c "pwrite 0 1" foo

stat'ing foo gives us a size of 1 instead of 4096 like it was.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/inode.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 37cc1776a5d7..0058fb3c2561 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -7002,6 +7002,7 @@ static int __btrfs_prealloc_file_range(struct inode *inode, int mode,
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 	struct btrfs_key ins;
 	u64 cur_offset = start;
+	u64 i_size;
 	int ret = 0;
 	bool own_trans = true;
 
@@ -7043,11 +7044,11 @@ static int __btrfs_prealloc_file_range(struct inode *inode, int mode,
 		    (actual_len > inode->i_size) &&
 		    (cur_offset > inode->i_size)) {
 			if (cur_offset > actual_len)
-				i_size_write(inode, actual_len);
+				i_size = actual_len;
 			else
-				i_size_write(inode, cur_offset);
-			i_size_write(inode, cur_offset);
-			btrfs_ordered_update_i_size(inode, cur_offset, NULL);
+				i_size = cur_offset;
+			i_size_write(inode, i_size);
+			btrfs_ordered_update_i_size(inode, i_size, NULL);
 		}
 
 		ret = btrfs_update_inode(trans, root, inode);

From 0ed42a63f3edb144b091d9528401fce95c3c4d8d Mon Sep 17 00:00:00 2001
From: Josef Bacik <josef@redhat.com>
Date: Mon, 22 Nov 2010 18:55:39 +0000
Subject: [PATCH 0991/1066] Btrfs: make sure new inode size is ok in fallocate

We have been failing xfstest 228 forever, because we don't check to make sure
the new inode size is acceptable as far as RLIMIT is concerned.  Just check to
make sure it's ok to create a inode with this new size and error out if not.
With this patch we now pass 228.

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/inode.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 0058fb3c2561..0eeacd93e8e5 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -7102,6 +7102,10 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 	btrfs_wait_ordered_range(inode, alloc_start, alloc_end - alloc_start);
 
 	mutex_lock(&inode->i_mutex);
+	ret = inode_newsize_ok(inode, alloc_end);
+	if (ret)
+		goto out;
+
 	if (alloc_start > inode->i_size) {
 		ret = btrfs_cont_expand(inode, alloc_start);
 		if (ret)

From bc1cbf1f86aa2501efa9ca637c736fce6bcc4b1d Mon Sep 17 00:00:00 2001
From: Josef Bacik <josef@redhat.com>
Date: Tue, 23 Nov 2010 19:50:59 +0000
Subject: [PATCH 0992/1066] Btrfs: update inode ctime when using links

Currently we fail xfstest 236 because we're not updating the inode ctime on
link.  This is a simple fix, and makes it so we pass 236 now.

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/inode.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 0eeacd93e8e5..6df921f218fb 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -4785,6 +4785,7 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir,
 		return -EPERM;
 
 	btrfs_inc_nlink(inode);
+	inode->i_ctime = CURRENT_TIME;
 
 	err = btrfs_set_inode_index(dir, &index);
 	if (err)

From 619c8c763928841b1112e1d417f88bc1d44daecb Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Mon, 22 Nov 2010 02:21:38 +0000
Subject: [PATCH 0993/1066] Btrfs - fix race between btrfs_get_sb() and umount

When mounting a btrfs file system btrfs_test_super() may attempt to
use sb->s_fs_info, the btrfs root, of a super block that is going away
and that has had the btrfs root set to NULL in its ->put_super(). But
if the super block is going away it cannot be an existing super block
so we can return false in this case.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/super.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 66e4612a7916..141fb317d3bc 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -566,6 +566,12 @@ static int btrfs_test_super(struct super_block *s, void *data)
 	struct btrfs_fs_devices *test_fs_devices = data;
 	struct btrfs_root *root = btrfs_sb(s);
 
+	/*
+	 * If this super block is going away, return false as it
+	 * can't match as an existing super block.
+	 */
+	if (!atomic_read(&s->s_active))
+		return 0;
 	return root->fs_info->fs_devices == test_fs_devices;
 }
 

From 975f84fee2e8a77ee5f41bfe7c5682bf29366b10 Mon Sep 17 00:00:00 2001
From: Josef Bacik <josef@redhat.com>
Date: Tue, 23 Nov 2010 19:36:57 +0000
Subject: [PATCH 0994/1066] Btrfs: fix fiemap

There are two big problems currently with FIEMAP

1) We return extents for holes.  This isn't supposed to happen, we just don't
return extents for holes and then userspace interprets the lack of an extent as
a hole.

2) We sometimes don't set FIEMAP_EXTENT_LAST properly.  This is because we wait
to see a EXTENT_FLAG_VACANCY flag on the em, but this won't happen if say we ask
fiemap to map up to the last extent in a file, and there is nothing but holes up
to the i_size.  To fix this we need to lookup the last extent in this file and
save the logical offset, so if we happen to try and map that extent we can be
sure to set FIEMAP_EXTENT_LAST.

With this patch we now pass xfstest 225, which we never have before.

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/extent_io.c | 63 +++++++++++++++++++++++++++++++++++++-------
 1 file changed, 54 insertions(+), 9 deletions(-)

diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 143d3f541d64..5e7a94d7da89 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -2901,21 +2901,53 @@ out:
 int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 		__u64 start, __u64 len, get_extent_t *get_extent)
 {
-	int ret;
+	int ret = 0;
 	u64 off = start;
 	u64 max = start + len;
 	u32 flags = 0;
+	u32 found_type;
+	u64 last;
 	u64 disko = 0;
+	struct btrfs_key found_key;
 	struct extent_map *em = NULL;
 	struct extent_state *cached_state = NULL;
+	struct btrfs_path *path;
+	struct btrfs_file_extent_item *item;
 	int end = 0;
 	u64 em_start = 0, em_len = 0;
 	unsigned long emflags;
-	ret = 0;
+	int hole = 0;
 
 	if (len == 0)
 		return -EINVAL;
 
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+	path->leave_spinning = 1;
+
+	ret = btrfs_lookup_file_extent(NULL, BTRFS_I(inode)->root,
+				       path, inode->i_ino, -1, 0);
+	if (ret < 0) {
+		btrfs_free_path(path);
+		return ret;
+	}
+	WARN_ON(!ret);
+	path->slots[0]--;
+	item = btrfs_item_ptr(path->nodes[0], path->slots[0],
+			      struct btrfs_file_extent_item);
+	btrfs_item_key_to_cpu(path->nodes[0], &found_key, path->slots[0]);
+	found_type = btrfs_key_type(&found_key);
+
+	/* No extents, just return */
+	if (found_key.objectid != inode->i_ino ||
+	    found_type != BTRFS_EXTENT_DATA_KEY) {
+		btrfs_free_path(path);
+		return 0;
+	}
+	last = found_key.offset;
+	btrfs_free_path(path);
+
 	lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len, 0,
 			 &cached_state, GFP_NOFS);
 	em = get_extent(inode, NULL, 0, off, max - off, 0);
@@ -2925,11 +2957,18 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 		ret = PTR_ERR(em);
 		goto out;
 	}
+
 	while (!end) {
+		hole = 0;
 		off = em->start + em->len;
 		if (off >= max)
 			end = 1;
 
+		if (em->block_start == EXTENT_MAP_HOLE) {
+			hole = 1;
+			goto next;
+		}
+
 		em_start = em->start;
 		em_len = em->len;
 
@@ -2939,8 +2978,6 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 		if (em->block_start == EXTENT_MAP_LAST_BYTE) {
 			end = 1;
 			flags |= FIEMAP_EXTENT_LAST;
-		} else if (em->block_start == EXTENT_MAP_HOLE) {
-			flags |= FIEMAP_EXTENT_UNWRITTEN;
 		} else if (em->block_start == EXTENT_MAP_INLINE) {
 			flags |= (FIEMAP_EXTENT_DATA_INLINE |
 				  FIEMAP_EXTENT_NOT_ALIGNED);
@@ -2953,10 +2990,10 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 		if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags))
 			flags |= FIEMAP_EXTENT_ENCODED;
 
+next:
 		emflags = em->flags;
 		free_extent_map(em);
 		em = NULL;
-
 		if (!end) {
 			em = get_extent(inode, NULL, 0, off, max - off, 0);
 			if (!em)
@@ -2967,15 +3004,23 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 			}
 			emflags = em->flags;
 		}
+
 		if (test_bit(EXTENT_FLAG_VACANCY, &emflags)) {
 			flags |= FIEMAP_EXTENT_LAST;
 			end = 1;
 		}
 
-		ret = fiemap_fill_next_extent(fieinfo, em_start, disko,
-					em_len, flags);
-		if (ret)
-			goto out_free;
+		if (em_start == last) {
+			flags |= FIEMAP_EXTENT_LAST;
+			end = 1;
+		}
+
+		if (!hole) {
+			ret = fiemap_fill_next_extent(fieinfo, em_start, disko,
+						em_len, flags);
+			if (ret)
+				goto out_free;
+		}
 	}
 out_free:
 	free_extent_map(em);

From 450ba0ea06b6ed3612d27f2b7127a9de4160f285 Mon Sep 17 00:00:00 2001
From: Josef Bacik <josef@redhat.com>
Date: Fri, 19 Nov 2010 14:59:15 -0500
Subject: [PATCH 0995/1066] Btrfs: setup blank root and fs_info for mount time

There is a problem with how we use sget, it searches through the list of supers
attached to the fs_type looking for a super with the same fs_devices as what
we're trying to mount.  This depends on sb->s_fs_info being filled, but we don't
fill that in until we get to btrfs_fill_super, so we could hit supers on the
fs_type super list that have a null s_fs_info.  In order to fix that we need to
go ahead and setup a blank root with a blank fs_info to hold fs_devices, that
way our test will work out right and then we can set s_fs_info in
btrfs_set_super, and then open_ctree will simply use our pre-allocated root and
fs_info when setting everything up.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/disk-io.c |  6 ++----
 fs/btrfs/super.c   | 34 +++++++++++++++++++++++++++++++---
 2 files changed, 33 insertions(+), 7 deletions(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index a67b98d58c2a..57c9d8eeb7dc 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1561,10 +1561,8 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 						 GFP_NOFS);
 	struct btrfs_root *csum_root = kzalloc(sizeof(struct btrfs_root),
 						 GFP_NOFS);
-	struct btrfs_root *tree_root = kzalloc(sizeof(struct btrfs_root),
-					       GFP_NOFS);
-	struct btrfs_fs_info *fs_info = kzalloc(sizeof(*fs_info),
-						GFP_NOFS);
+	struct btrfs_root *tree_root = btrfs_sb(sb);
+	struct btrfs_fs_info *fs_info = tree_root->fs_info;
 	struct btrfs_root *chunk_root = kzalloc(sizeof(struct btrfs_root),
 						GFP_NOFS);
 	struct btrfs_root *dev_root = kzalloc(sizeof(struct btrfs_root),
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 141fb317d3bc..47bf67cbe6bf 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -563,7 +563,7 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 
 static int btrfs_test_super(struct super_block *s, void *data)
 {
-	struct btrfs_fs_devices *test_fs_devices = data;
+	struct btrfs_root *test_root = data;
 	struct btrfs_root *root = btrfs_sb(s);
 
 	/*
@@ -572,9 +572,17 @@ static int btrfs_test_super(struct super_block *s, void *data)
 	 */
 	if (!atomic_read(&s->s_active))
 		return 0;
-	return root->fs_info->fs_devices == test_fs_devices;
+	return root->fs_info->fs_devices == test_root->fs_info->fs_devices;
 }
 
+static int btrfs_set_super(struct super_block *s, void *data)
+{
+	s->s_fs_info = data;
+
+	return set_anon_super(s, data);
+}
+
+
 /*
  * Find a superblock for the given device / mount point.
  *
@@ -588,6 +596,8 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags,
 	struct super_block *s;
 	struct dentry *root;
 	struct btrfs_fs_devices *fs_devices = NULL;
+	struct btrfs_root *tree_root = NULL;
+	struct btrfs_fs_info *fs_info = NULL;
 	fmode_t mode = FMODE_READ;
 	char *subvol_name = NULL;
 	u64 subvol_objectid = 0;
@@ -615,8 +625,24 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags,
 		goto error_close_devices;
 	}
 
+	/*
+	 * Setup a dummy root and fs_info for test/set super.  This is because
+	 * we don't actually fill this stuff out until open_ctree, but we need
+	 * it for searching for existing supers, so this lets us do that and
+	 * then open_ctree will properly initialize everything later.
+	 */
+	fs_info = kzalloc(sizeof(struct btrfs_fs_info), GFP_NOFS);
+	tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+	if (!fs_info || !tree_root) {
+		error = -ENOMEM;
+		goto error_close_devices;
+	}
+	fs_info->tree_root = tree_root;
+	fs_info->fs_devices = fs_devices;
+	tree_root->fs_info = fs_info;
+
 	bdev = fs_devices->latest_bdev;
-	s = sget(fs_type, btrfs_test_super, set_anon_super, fs_devices);
+	s = sget(fs_type, btrfs_test_super, btrfs_set_super, tree_root);
 	if (IS_ERR(s))
 		goto error_s;
 
@@ -685,6 +711,8 @@ error_s:
 	error = PTR_ERR(s);
 error_close_devices:
 	btrfs_close_devices(fs_devices);
+	kfree(fs_info);
+	kfree(tree_root);
 error_free_subvol_name:
 	kfree(subvol_name);
 	return error;

From 4cb6a614ba0e58cae8abdadbf73bcb4d37a3f599 Mon Sep 17 00:00:00 2001
From: Tracey Dent <tdent48227@gmail.com>
Date: Sun, 21 Nov 2010 15:23:50 +0000
Subject: [PATCH 0996/1066] Net: ceph: Makefile: Remove unnessary code

Remove the if and else conditional because the code is in mainline and there
is no need in it being there.

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ceph/Makefile | 22 ----------------------
 1 file changed, 22 deletions(-)

diff --git a/net/ceph/Makefile b/net/ceph/Makefile
index aab1cabb8035..5f19415ec9c0 100644
--- a/net/ceph/Makefile
+++ b/net/ceph/Makefile
@@ -1,9 +1,6 @@
 #
 # Makefile for CEPH filesystem.
 #
-
-ifneq ($(KERNELRELEASE),)
-
 obj-$(CONFIG_CEPH_LIB) += libceph.o
 
 libceph-objs := ceph_common.o messenger.o msgpool.o buffer.o pagelist.o \
@@ -16,22 +13,3 @@ libceph-objs := ceph_common.o messenger.o msgpool.o buffer.o pagelist.o \
 	ceph_fs.o ceph_strings.o ceph_hash.o \
 	pagevec.o
 
-else
-#Otherwise we were called directly from the command
-# line; invoke the kernel build system.
-
-KERNELDIR ?= /lib/modules/$(shell uname -r)/build
-PWD := $(shell pwd)
-
-default: all
-
-all:
-	$(MAKE) -C $(KERNELDIR) M=$(PWD) CONFIG_CEPH_LIB=m modules
-
-modules_install:
-	$(MAKE) -C $(KERNELDIR) M=$(PWD) CONFIG_CEPH_LIB=m modules_install
-
-clean:
-	$(MAKE) -C $(KERNELDIR) M=$(PWD) clean
-
-endif

From 8475ef9fd16cadbfc692f78e608d1941a340beb2 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@parallels.com>
Date: Mon, 22 Nov 2010 03:26:12 +0000
Subject: [PATCH 0997/1066] netns: Don't leak others' openreq-s in proc

The /proc/net/tcp leaks openreq sockets from other namespaces.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/tcp_ipv4.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 69ccbc1dde9c..e13da6de1fc7 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2043,7 +2043,9 @@ get_req:
 	}
 get_sk:
 	sk_nulls_for_each_from(sk, node) {
-		if (sk->sk_family == st->family && net_eq(sock_net(sk), net)) {
+		if (!net_eq(sock_net(sk), net))
+			continue;
+		if (sk->sk_family == st->family) {
 			cur = sk;
 			goto out;
 		}

From 0147fc058d11bd4009b126d09974d2c8f48fef15 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Mon, 22 Nov 2010 12:54:21 +0000
Subject: [PATCH 0998/1066] tcp: restrict net.ipv4.tcp_adv_win_scale (#20312)

tcp_win_from_space() does the following:

      if (sysctl_tcp_adv_win_scale <= 0)
              return space >> (-sysctl_tcp_adv_win_scale);
      else
              return space - (space >> sysctl_tcp_adv_win_scale);

"space" is int.

As per C99 6.5.7 (3) shifting int for 32 or more bits is
undefined behaviour.

Indeed, if sysctl_tcp_adv_win_scale is exactly 32,
space >> 32 equals space and function returns 0.

Which means we busyloop in tcp_fixup_rcvbuf().

Restrict net.ipv4.tcp_adv_win_scale to [-31, 31].

Fix https://bugzilla.kernel.org/show_bug.cgi?id=20312

Steps to reproduce:

      echo 32 >/proc/sys/net/ipv4/tcp_adv_win_scale
      wget www.kernel.org
      [softlockup]

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 Documentation/networking/ip-sysctl.txt | 1 +
 net/ipv4/sysctl_net_ipv4.c             | 6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index fe95105992c5..3c5e465296e1 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -144,6 +144,7 @@ tcp_adv_win_scale - INTEGER
 	Count buffering overhead as bytes/2^tcp_adv_win_scale
 	(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
 	if it is <= 0.
+	Possible values are [-31, 31], inclusive.
 	Default: 2
 
 tcp_allowed_congestion_control - STRING
diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
index e91911d7aae2..1b4ec21497a4 100644
--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -26,6 +26,8 @@ static int zero;
 static int tcp_retr1_max = 255;
 static int ip_local_port_range_min[] = { 1, 1 };
 static int ip_local_port_range_max[] = { 65535, 65535 };
+static int tcp_adv_win_scale_min = -31;
+static int tcp_adv_win_scale_max = 31;
 
 /* Update system visible IP port range */
 static void set_local_port_range(int range[2])
@@ -426,7 +428,9 @@ static struct ctl_table ipv4_table[] = {
 		.data		= &sysctl_tcp_adv_win_scale,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &tcp_adv_win_scale_min,
+		.extra2		= &tcp_adv_win_scale_max,
 	},
 	{
 		.procname	= "tcp_tw_reuse",

From 0ac78870220b6e0ac74dd9292bcfa7b18718babd Mon Sep 17 00:00:00 2001
From: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Date: Tue, 23 Nov 2010 02:36:56 +0000
Subject: [PATCH 0999/1066] dccp: fix error in updating the GAR

This fixes a bug in updating the Greatest Acknowledgment number Received (GAR):
the current implementation does not track the greatest received value -
lower values in the range AWL..AWH (RFC 4340, 7.5.1) erase higher ones.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/dccp/input.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/dccp/input.c b/net/dccp/input.c
index 265985370fa1..e424a09e83f6 100644
--- a/net/dccp/input.c
+++ b/net/dccp/input.c
@@ -239,7 +239,8 @@ static int dccp_check_seqno(struct sock *sk, struct sk_buff *skb)
 		dccp_update_gsr(sk, seqno);
 
 		if (dh->dccph_type != DCCP_PKT_SYNC &&
-		    (ackno != DCCP_PKT_WITHOUT_ACK_SEQ))
+		    ackno != DCCP_PKT_WITHOUT_ACK_SEQ &&
+		    after48(ackno, dp->dccps_gar))
 			dp->dccps_gar = ackno;
 	} else {
 		unsigned long now = jiffies;

From 462ca99c2ff6caae94dde5c05b56b54f6c01602a Mon Sep 17 00:00:00 2001
From: Wolfgang Grandegger <wg@grandegger.com>
Date: Tue, 23 Nov 2010 06:40:25 +0000
Subject: [PATCH 1000/1066] au1000_eth: fix invalid address accessing the MAC
 enable register

"aup->enable" holds already the address pointing to the MAC enable
register. The bug was introduced by commit d0e7cb:

"au1000-eth: remove volatiles, switch to I/O accessors".

CC: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/au1000_eth.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 43489f89c142..53eff9ba6e95 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -155,10 +155,10 @@ static void au1000_enable_mac(struct net_device *dev, int force_reset)
 	spin_lock_irqsave(&aup->lock, flags);
 
 	if (force_reset || (!aup->mac_enabled)) {
-		writel(MAC_EN_CLOCK_ENABLE, &aup->enable);
+		writel(MAC_EN_CLOCK_ENABLE, aup->enable);
 		au_sync_delay(2);
 		writel((MAC_EN_RESET0 | MAC_EN_RESET1 | MAC_EN_RESET2
-				| MAC_EN_CLOCK_ENABLE), &aup->enable);
+				| MAC_EN_CLOCK_ENABLE), aup->enable);
 		au_sync_delay(2);
 
 		aup->mac_enabled = 1;
@@ -503,9 +503,9 @@ static void au1000_reset_mac_unlocked(struct net_device *dev)
 
 	au1000_hard_stop(dev);
 
-	writel(MAC_EN_CLOCK_ENABLE, &aup->enable);
+	writel(MAC_EN_CLOCK_ENABLE, aup->enable);
 	au_sync_delay(2);
-	writel(0, &aup->enable);
+	writel(0, aup->enable);
 	au_sync_delay(2);
 
 	aup->tx_full = 0;
@@ -1119,7 +1119,7 @@ static int __devinit au1000_probe(struct platform_device *pdev)
 	/* set a random MAC now in case platform_data doesn't provide one */
 	random_ether_addr(dev->dev_addr);
 
-	writel(0, &aup->enable);
+	writel(0, aup->enable);
 	aup->mac_enabled = 0;
 
 	pd = pdev->dev.platform_data;

From 3c6f27bf33052ea6ba9d82369fb460726fb779c0 Mon Sep 17 00:00:00 2001
From: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Tue, 23 Nov 2010 11:02:13 +0000
Subject: [PATCH 1001/1066] DECnet: don't leak uninitialized stack byte

A single uninitialized padding byte is leaked to userspace.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
CC: stable <stable@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/decnet/af_decnet.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index a76b78de679f..6f97268ed85f 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -1556,6 +1556,8 @@ static int __dn_getsockopt(struct socket *sock, int level,int optname, char __us
 			if (r_len > sizeof(struct linkinfo_dn))
 				r_len = sizeof(struct linkinfo_dn);
 
+			memset(&link, 0, sizeof(link));
+
 			switch(sock->state) {
 				case SS_CONNECTING:
 					link.idn_linkstate = LL_CONNECTING;

From bcc70bb3aeae7c3d035881d41055685f08a2b745 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Tue, 23 Nov 2010 11:43:44 +0000
Subject: [PATCH 1002/1066] net, ppp: Report correct error code if unit
 allocation failed

Allocating unit from ird might return several error codes
not only -EAGAIN, so it should not be changed and returned
precisely. Same time unit release procedure should be invoked
only if device is unregistering.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
CC: Paul Mackerras <paulus@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ppp_generic.c | 43 ++++++++++++++++++++-------------------
 1 file changed, 22 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 09cf56d0416a..39659976a1ac 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -2584,16 +2584,16 @@ ppp_create_interface(struct net *net, int unit, int *retp)
 	 */
 	dev_net_set(dev, net);
 
-	ret = -EEXIST;
 	mutex_lock(&pn->all_ppp_mutex);
 
 	if (unit < 0) {
 		unit = unit_get(&pn->units_idr, ppp);
 		if (unit < 0) {
-			*retp = unit;
+			ret = unit;
 			goto out2;
 		}
 	} else {
+		ret = -EEXIST;
 		if (unit_find(&pn->units_idr, unit))
 			goto out2; /* unit already exists */
 		/*
@@ -2668,10 +2668,10 @@ static void ppp_shutdown_interface(struct ppp *ppp)
 		ppp->closing = 1;
 		ppp_unlock(ppp);
 		unregister_netdev(ppp->dev);
+		unit_put(&pn->units_idr, ppp->file.index);
 	} else
 		ppp_unlock(ppp);
 
-	unit_put(&pn->units_idr, ppp->file.index);
 	ppp->file.dead = 1;
 	ppp->owner = NULL;
 	wake_up_interruptible(&ppp->file.rwait);
@@ -2859,8 +2859,7 @@ static void __exit ppp_cleanup(void)
  * by holding all_ppp_mutex
  */
 
-/* associate pointer with specified number */
-static int unit_set(struct idr *p, void *ptr, int n)
+static int __unit_alloc(struct idr *p, void *ptr, int n)
 {
 	int unit, err;
 
@@ -2871,10 +2870,24 @@ again:
 	}
 
 	err = idr_get_new_above(p, ptr, n, &unit);
-	if (err == -EAGAIN)
-		goto again;
+	if (err < 0) {
+		if (err == -EAGAIN)
+			goto again;
+		return err;
+	}
 
-	if (unit != n) {
+	return unit;
+}
+
+/* associate pointer with specified number */
+static int unit_set(struct idr *p, void *ptr, int n)
+{
+	int unit;
+
+	unit = __unit_alloc(p, ptr, n);
+	if (unit < 0)
+		return unit;
+	else if (unit != n) {
 		idr_remove(p, unit);
 		return -EINVAL;
 	}
@@ -2885,19 +2898,7 @@ again:
 /* get new free unit number and associate pointer with it */
 static int unit_get(struct idr *p, void *ptr)
 {
-	int unit, err;
-
-again:
-	if (!idr_pre_get(p, GFP_KERNEL)) {
-		printk(KERN_ERR "PPP: No free memory for idr\n");
-		return -ENOMEM;
-	}
-
-	err = idr_get_new_above(p, ptr, 0, &unit);
-	if (err == -EAGAIN)
-		goto again;
-
-	return unit;
+	return __unit_alloc(p, ptr, 0);
 }
 
 /* put unit number back to a pool */

From 42eb59d3a80ff83b4cacb92dcc44b22da7d4969b Mon Sep 17 00:00:00 2001
From: Casey Leedom <leedom@chelsio.com>
Date: Wed, 24 Nov 2010 12:23:57 +0000
Subject: [PATCH 1003/1066] cxgb4vf: fix setting unicast/multicast addresses
 ...

We were truncating the number of unicast and multicast MAC addresses
supported.  Additionally, we were incorrectly computing the MAC Address
hash (a "1 << N" where we needed a "1ULL << N").

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb4vf/cxgb4vf_main.c | 73 ++++++++++++++---------
 drivers/net/cxgb4vf/t4vf_hw.c      | 94 +++++++++++++++++++-----------
 2 files changed, 104 insertions(+), 63 deletions(-)

diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
index c3449bbc585a..d887a76cd39d 100644
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/cxgb4vf/cxgb4vf_main.c
@@ -816,40 +816,48 @@ static struct net_device_stats *cxgb4vf_get_stats(struct net_device *dev)
 }
 
 /*
- * Collect up to maxaddrs worth of a netdevice's unicast addresses into an
- * array of addrss pointers and return the number collected.
+ * Collect up to maxaddrs worth of a netdevice's unicast addresses, starting
+ * at a specified offset within the list, into an array of addrss pointers and
+ * return the number collected.
  */
-static inline int collect_netdev_uc_list_addrs(const struct net_device *dev,
-					       const u8 **addr,
-					       unsigned int maxaddrs)
+static inline unsigned int collect_netdev_uc_list_addrs(const struct net_device *dev,
+							const u8 **addr,
+							unsigned int offset,
+							unsigned int maxaddrs)
 {
+	unsigned int index = 0;
 	unsigned int naddr = 0;
 	const struct netdev_hw_addr *ha;
 
-	for_each_dev_addr(dev, ha) {
-		addr[naddr++] = ha->addr;
-		if (naddr >= maxaddrs)
-			break;
-	}
+	for_each_dev_addr(dev, ha)
+		if (index++ >= offset) {
+			addr[naddr++] = ha->addr;
+			if (naddr >= maxaddrs)
+				break;
+		}
 	return naddr;
 }
 
 /*
- * Collect up to maxaddrs worth of a netdevice's multicast addresses into an
- * array of addrss pointers and return the number collected.
+ * Collect up to maxaddrs worth of a netdevice's multicast addresses, starting
+ * at a specified offset within the list, into an array of addrss pointers and
+ * return the number collected.
  */
-static inline int collect_netdev_mc_list_addrs(const struct net_device *dev,
-					       const u8 **addr,
-					       unsigned int maxaddrs)
+static inline unsigned int collect_netdev_mc_list_addrs(const struct net_device *dev,
+							const u8 **addr,
+							unsigned int offset,
+							unsigned int maxaddrs)
 {
+	unsigned int index = 0;
 	unsigned int naddr = 0;
 	const struct netdev_hw_addr *ha;
 
-	netdev_for_each_mc_addr(ha, dev) {
-		addr[naddr++] = ha->addr;
-		if (naddr >= maxaddrs)
-			break;
-	}
+	netdev_for_each_mc_addr(ha, dev)
+		if (index++ >= offset) {
+			addr[naddr++] = ha->addr;
+			if (naddr >= maxaddrs)
+				break;
+		}
 	return naddr;
 }
 
@@ -862,16 +870,20 @@ static int set_addr_filters(const struct net_device *dev, bool sleep)
 	u64 mhash = 0;
 	u64 uhash = 0;
 	bool free = true;
-	u16 filt_idx[7];
+	unsigned int offset, naddr;
 	const u8 *addr[7];
-	int ret, naddr = 0;
+	int ret;
 	const struct port_info *pi = netdev_priv(dev);
 
 	/* first do the secondary unicast addresses */
-	naddr = collect_netdev_uc_list_addrs(dev, addr, ARRAY_SIZE(addr));
-	if (naddr > 0) {
+	for (offset = 0; ; offset += naddr) {
+		naddr = collect_netdev_uc_list_addrs(dev, addr, offset,
+						     ARRAY_SIZE(addr));
+		if (naddr == 0)
+			break;
+
 		ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free,
-					  naddr, addr, filt_idx, &uhash, sleep);
+					  naddr, addr, NULL, &uhash, sleep);
 		if (ret < 0)
 			return ret;
 
@@ -879,12 +891,17 @@ static int set_addr_filters(const struct net_device *dev, bool sleep)
 	}
 
 	/* next set up the multicast addresses */
-	naddr = collect_netdev_mc_list_addrs(dev, addr, ARRAY_SIZE(addr));
-	if (naddr > 0) {
+	for (offset = 0; ; offset += naddr) {
+		naddr = collect_netdev_mc_list_addrs(dev, addr, offset,
+						     ARRAY_SIZE(addr));
+		if (naddr == 0)
+			break;
+
 		ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free,
-					  naddr, addr, filt_idx, &mhash, sleep);
+					  naddr, addr, NULL, &mhash, sleep);
 		if (ret < 0)
 			return ret;
+		free = false;
 	}
 
 	return t4vf_set_addr_hash(pi->adapter, pi->viid, uhash != 0,
diff --git a/drivers/net/cxgb4vf/t4vf_hw.c b/drivers/net/cxgb4vf/t4vf_hw.c
index e306c20dfaee..19520afe1a12 100644
--- a/drivers/net/cxgb4vf/t4vf_hw.c
+++ b/drivers/net/cxgb4vf/t4vf_hw.c
@@ -1014,48 +1014,72 @@ int t4vf_alloc_mac_filt(struct adapter *adapter, unsigned int viid, bool free,
 			unsigned int naddr, const u8 **addr, u16 *idx,
 			u64 *hash, bool sleep_ok)
 {
-	int i, ret;
+	int offset, ret = 0;
+	unsigned nfilters = 0;
+	unsigned int rem = naddr;
 	struct fw_vi_mac_cmd cmd, rpl;
-	struct fw_vi_mac_exact *p;
-	size_t len16;
 
-	if (naddr > ARRAY_SIZE(cmd.u.exact))
+	if (naddr > FW_CLS_TCAM_NUM_ENTRIES)
 		return -EINVAL;
-	len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
-				      u.exact[naddr]), 16);
 
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) |
-				     FW_CMD_REQUEST |
-				     FW_CMD_WRITE |
-				     (free ? FW_CMD_EXEC : 0) |
-				     FW_VI_MAC_CMD_VIID(viid));
-	cmd.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_FREEMACS(free) |
-					    FW_CMD_LEN16(len16));
+	for (offset = 0; offset < naddr; /**/) {
+		unsigned int fw_naddr = (rem < ARRAY_SIZE(cmd.u.exact)
+					 ? rem
+					 : ARRAY_SIZE(cmd.u.exact));
+		size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
+						     u.exact[fw_naddr]), 16);
+		struct fw_vi_mac_exact *p;
+		int i;
 
-	for (i = 0, p = cmd.u.exact; i < naddr; i++, p++) {
-		p->valid_to_idx =
-			cpu_to_be16(FW_VI_MAC_CMD_VALID |
-				    FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC));
-		memcpy(p->macaddr, addr[i], sizeof(p->macaddr));
+		memset(&cmd, 0, sizeof(cmd));
+		cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) |
+					     FW_CMD_REQUEST |
+					     FW_CMD_WRITE |
+					     (free ? FW_CMD_EXEC : 0) |
+					     FW_VI_MAC_CMD_VIID(viid));
+		cmd.freemacs_to_len16 =
+			cpu_to_be32(FW_VI_MAC_CMD_FREEMACS(free) |
+				    FW_CMD_LEN16(len16));
+
+		for (i = 0, p = cmd.u.exact; i < fw_naddr; i++, p++) {
+			p->valid_to_idx = cpu_to_be16(
+				FW_VI_MAC_CMD_VALID |
+				FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC));
+			memcpy(p->macaddr, addr[offset+i], sizeof(p->macaddr));
+		}
+
+
+		ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &rpl,
+					sleep_ok);
+		if (ret && ret != -ENOMEM)
+			break;
+
+		for (i = 0, p = rpl.u.exact; i < fw_naddr; i++, p++) {
+			u16 index = FW_VI_MAC_CMD_IDX_GET(
+				be16_to_cpu(p->valid_to_idx));
+
+			if (idx)
+				idx[offset+i] =
+					(index >= FW_CLS_TCAM_NUM_ENTRIES
+					 ? 0xffff
+					 : index);
+			if (index < FW_CLS_TCAM_NUM_ENTRIES)
+				nfilters++;
+			else if (hash)
+				*hash |= (1ULL << hash_mac_addr(addr[offset+i]));
+		}
+
+		free = false;
+		offset += fw_naddr;
+		rem -= fw_naddr;
 	}
 
-	ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &rpl, sleep_ok);
-	if (ret)
-		return ret;
-
-	for (i = 0, p = rpl.u.exact; i < naddr; i++, p++) {
-		u16 index = FW_VI_MAC_CMD_IDX_GET(be16_to_cpu(p->valid_to_idx));
-
-		if (idx)
-			idx[i] = (index >= FW_CLS_TCAM_NUM_ENTRIES
-				  ? 0xffff
-				  : index);
-		if (index < FW_CLS_TCAM_NUM_ENTRIES)
-			ret++;
-		else if (hash)
-			*hash |= (1 << hash_mac_addr(addr[i]));
-	}
+	/*
+	 * If there were no errors or we merely ran out of room in our MAC
+	 * address arena, return the number of filters actually written.
+	 */
+	if (ret == 0 || ret == -ENOMEM)
+		ret = nfilters;
 	return ret;
 }
 

From 03fe5f3ef7eab88e1405baa52a7923fbf337230b Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Wed, 24 Nov 2010 13:54:54 +0000
Subject: [PATCH 1004/1066] NET: wan/x25_asy, move lapb_unregister to
 x25_asy_close_tty

We register lapb when tty is created, but unregister it only when the
device is UP. So move the lapb_unregister to x25_asy_close_tty after
the device is down.

The old behaviour causes ldisc switching to fail each second attempt,
because we noted for us that the device is unused, so we use it the
second time, but labp layer still have it registered, so it fails
obviously.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Sergey Lapin <slapin@ossfans.org>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Tested-by: Sergey Lapin <slapin@ossfans.org>
Tested-by: Mikhail Ulyanov <ulyanov.mikhail@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/wan/x25_asy.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index d81ad8397885..cf05504d9511 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -498,7 +498,6 @@ norbuff:
 static int x25_asy_close(struct net_device *dev)
 {
 	struct x25_asy *sl = netdev_priv(dev);
-	int err;
 
 	spin_lock(&sl->lock);
 	if (sl->tty)
@@ -507,10 +506,6 @@ static int x25_asy_close(struct net_device *dev)
 	netif_stop_queue(dev);
 	sl->rcount = 0;
 	sl->xleft  = 0;
-	err = lapb_unregister(dev);
-	if (err != LAPB_OK)
-		printk(KERN_ERR "x25_asy_close: lapb_unregister error -%d\n",
-			err);
 	spin_unlock(&sl->lock);
 	return 0;
 }
@@ -595,6 +590,7 @@ static int x25_asy_open_tty(struct tty_struct *tty)
 static void x25_asy_close_tty(struct tty_struct *tty)
 {
 	struct x25_asy *sl = tty->disc_data;
+	int err;
 
 	/* First make sure we're connected. */
 	if (!sl || sl->magic != X25_ASY_MAGIC)
@@ -605,6 +601,11 @@ static void x25_asy_close_tty(struct tty_struct *tty)
 		dev_close(sl->dev);
 	rtnl_unlock();
 
+	err = lapb_unregister(sl->dev);
+	if (err != LAPB_OK)
+		printk(KERN_ERR "x25_asy_close: lapb_unregister error -%d\n",
+			err);
+
 	tty->disc_data = NULL;
 	sl->tty = NULL;
 	x25_asy_free(sl);

From 8e65c0ece6f2aa732f9b755331869c67aeb1c7f6 Mon Sep 17 00:00:00 2001
From: Filip Aben <f.aben@option.com>
Date: Thu, 25 Nov 2010 03:40:50 +0000
Subject: [PATCH 1005/1066] hso: fix disable_net

The HSO driver incorrectly creates a serial device instead of a net
device when disable_net is set. It shouldn't create anything for the
network interface.

Signed-off-by: Filip Aben <f.aben@option.com>
Reported-by: Piotr Isajew <pki@ex.com.pl>
Reported-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/hso.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index b154a94de03e..62e9e8dc8190 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2994,12 +2994,14 @@ static int hso_probe(struct usb_interface *interface,
 
 	case HSO_INTF_BULK:
 		/* It's a regular bulk interface */
-		if (((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) &&
-		    !disable_net)
-			hso_dev = hso_create_net_device(interface, port_spec);
-		else
+		if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
+			if (!disable_net)
+				hso_dev =
+				    hso_create_net_device(interface, port_spec);
+		} else {
 			hso_dev =
 			    hso_create_bulk_serial_device(interface, port_spec);
+		}
 		if (!hso_dev)
 			goto exit;
 		break;

From 71993e62a47dabddf10302807d6aa260455503f4 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun, 28 Nov 2010 13:56:09 -0800
Subject: [PATCH 1006/1066] Rename 'pipe_info()' to 'get_pipe_info()'

.. and change it to take the 'file' pointer instead of an inode, since
that's what all users want anyway.

The renaming is preparatory to exporting it to other users.  The old
'pipe_info()' name was too generic and is already used elsewhere, so
before making the function public we need to use a more specific name.

Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/splice.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/fs/splice.c b/fs/splice.c
index 8f1dfaecc8f0..0d92dabcc576 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1316,12 +1316,11 @@ static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
  * location, so checking ->i_pipe is not enough to verify that this is a
  * pipe.
  */
-static inline struct pipe_inode_info *pipe_info(struct inode *inode)
+static inline struct pipe_inode_info *get_pipe_info(struct file *file)
 {
-	if (S_ISFIFO(inode->i_mode))
-		return inode->i_pipe;
+	struct inode *i = file->f_path.dentry->d_inode;
 
-	return NULL;
+	return S_ISFIFO(i->i_mode) ? i->i_pipe : NULL;
 }
 
 /*
@@ -1336,8 +1335,8 @@ static long do_splice(struct file *in, loff_t __user *off_in,
 	loff_t offset, *off;
 	long ret;
 
-	ipipe = pipe_info(in->f_path.dentry->d_inode);
-	opipe = pipe_info(out->f_path.dentry->d_inode);
+	ipipe = get_pipe_info(in);
+	opipe = get_pipe_info(out);
 
 	if (ipipe && opipe) {
 		if (off_in || off_out)
@@ -1555,7 +1554,7 @@ static long vmsplice_to_user(struct file *file, const struct iovec __user *iov,
 	int error;
 	long ret;
 
-	pipe = pipe_info(file->f_path.dentry->d_inode);
+	pipe = get_pipe_info(file);
 	if (!pipe)
 		return -EBADF;
 
@@ -1642,7 +1641,7 @@ static long vmsplice_to_pipe(struct file *file, const struct iovec __user *iov,
 	};
 	long ret;
 
-	pipe = pipe_info(file->f_path.dentry->d_inode);
+	pipe = get_pipe_info(file);
 	if (!pipe)
 		return -EBADF;
 
@@ -2022,8 +2021,8 @@ static int link_pipe(struct pipe_inode_info *ipipe,
 static long do_tee(struct file *in, struct file *out, size_t len,
 		   unsigned int flags)
 {
-	struct pipe_inode_info *ipipe = pipe_info(in->f_path.dentry->d_inode);
-	struct pipe_inode_info *opipe = pipe_info(out->f_path.dentry->d_inode);
+	struct pipe_inode_info *ipipe = get_pipe_info(in);
+	struct pipe_inode_info *opipe = get_pipe_info(out);
 	int ret = -EINVAL;
 
 	/*

From c66fb347946ebdd5b10908866ecc9fa05ee2cf3d Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun, 28 Nov 2010 14:09:57 -0800
Subject: [PATCH 1007/1066] Export 'get_pipe_info()' to other users

And in particular, use it in 'pipe_fcntl()'.

The other pipe functions do not need to use the 'careful' version, since
they are only ever called for things that are already known to be pipes.

The normal read/write/ioctl functions are called through the file
operations structures, so if a file isn't a pipe, they'd never get
called.  But pipe_fcntl() is special, and called directly from the
generic fcntl code, and needs to use the same careful function that the
splice code is using.

Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/pipe.c                 |  2 +-
 fs/splice.c               | 11 -----------
 include/linux/pipe_fs_i.h | 12 ++++++++++++
 3 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/fs/pipe.c b/fs/pipe.c
index a8012a955720..b8997f8c6324 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -1204,7 +1204,7 @@ long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
 	struct pipe_inode_info *pipe;
 	long ret;
 
-	pipe = file->f_path.dentry->d_inode->i_pipe;
+	pipe = get_pipe_info(file);
 	if (!pipe)
 		return -EBADF;
 
diff --git a/fs/splice.c b/fs/splice.c
index 0d92dabcc576..ce2f02579e35 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1311,17 +1311,6 @@ long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
 static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
 			       struct pipe_inode_info *opipe,
 			       size_t len, unsigned int flags);
-/*
- * After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
- * location, so checking ->i_pipe is not enough to verify that this is a
- * pipe.
- */
-static inline struct pipe_inode_info *get_pipe_info(struct file *file)
-{
-	struct inode *i = file->f_path.dentry->d_inode;
-
-	return S_ISFIFO(i->i_mode) ? i->i_pipe : NULL;
-}
 
 /*
  * Determine where to splice to/from.
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index 445796945ac9..3c5ac3147428 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -161,4 +161,16 @@ void generic_pipe_buf_release(struct pipe_inode_info *, struct pipe_buffer *);
 /* for F_SETPIPE_SZ and F_GETPIPE_SZ */
 long pipe_fcntl(struct file *, unsigned int, unsigned long arg);
 
+/*
+ * After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
+ * location, so checking ->i_pipe is not enough to verify that this is a
+ * pipe.
+ */
+static inline struct pipe_inode_info *get_pipe_info(struct file *file)
+{
+	struct inode *i = file->f_path.dentry->d_inode;
+
+	return S_ISFIFO(i->i_mode) ? i->i_pipe : NULL;
+}
+
 #endif

From 72083646528d4887b920deb71b37e09bc7d227bb Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun, 28 Nov 2010 16:27:19 -0800
Subject: [PATCH 1008/1066] Un-inline get_pipe_info() helper function

This avoids some include-file hell, and the function isn't really
important enough to be inlined anyway.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/pipe.c                 | 12 ++++++++++++
 include/linux/pipe_fs_i.h | 13 +------------
 2 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/fs/pipe.c b/fs/pipe.c
index b8997f8c6324..04629f36e397 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -1199,6 +1199,18 @@ int pipe_proc_fn(struct ctl_table *table, int write, void __user *buf,
 	return ret;
 }
 
+/*
+ * After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
+ * location, so checking ->i_pipe is not enough to verify that this is a
+ * pipe.
+ */
+struct pipe_inode_info *get_pipe_info(struct file *file)
+{
+	struct inode *i = file->f_path.dentry->d_inode;
+
+	return S_ISFIFO(i->i_mode) ? i->i_pipe : NULL;
+}
+
 long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	struct pipe_inode_info *pipe;
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index 3c5ac3147428..bb27d7ec2fb9 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -160,17 +160,6 @@ void generic_pipe_buf_release(struct pipe_inode_info *, struct pipe_buffer *);
 
 /* for F_SETPIPE_SZ and F_GETPIPE_SZ */
 long pipe_fcntl(struct file *, unsigned int, unsigned long arg);
-
-/*
- * After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
- * location, so checking ->i_pipe is not enough to verify that this is a
- * pipe.
- */
-static inline struct pipe_inode_info *get_pipe_info(struct file *file)
-{
-	struct inode *i = file->f_path.dentry->d_inode;
-
-	return S_ISFIFO(i->i_mode) ? i->i_pipe : NULL;
-}
+struct pipe_inode_info *get_pipe_info(struct file *file);
 
 #endif

From 163cf09c2a0ee5cac6285f9347975bd1e97725da Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Sun, 28 Nov 2010 19:56:33 -0500
Subject: [PATCH 1009/1066] Btrfs: deal with DIO bios that span more than one
 ordered extent

The new DIO bio splitting code has problems when the bio
spans more than one ordered extent.  This will happen as the
generic DIO code merges our get_blocks calls together into
a bigger single bio.

This fixes things by walking forward in the ordered extent
code finding all the overlapping ordered extents and completing them
all at once.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/inode.c        | 23 +++++++++++---
 fs/btrfs/ordered-data.c | 67 +++++++++++++++++++++++++++++++++++++++++
 fs/btrfs/ordered-data.h |  3 ++
 3 files changed, 89 insertions(+), 4 deletions(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 6df921f218fb..0f34cae0a633 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -5602,15 +5602,18 @@ static void btrfs_endio_direct_write(struct bio *bio, int err)
 	struct btrfs_trans_handle *trans;
 	struct btrfs_ordered_extent *ordered = NULL;
 	struct extent_state *cached_state = NULL;
+	u64 ordered_offset = dip->logical_offset;
+	u64 ordered_bytes = dip->bytes;
 	int ret;
 
 	if (err)
 		goto out_done;
-
-	ret = btrfs_dec_test_ordered_pending(inode, &ordered,
-					     dip->logical_offset, dip->bytes);
+again:
+	ret = btrfs_dec_test_first_ordered_pending(inode, &ordered,
+						   &ordered_offset,
+						   ordered_bytes);
 	if (!ret)
-		goto out_done;
+		goto out_test;
 
 	BUG_ON(!ordered);
 
@@ -5670,8 +5673,20 @@ out_unlock:
 out:
 	btrfs_delalloc_release_metadata(inode, ordered->len);
 	btrfs_end_transaction(trans, root);
+	ordered_offset = ordered->file_offset + ordered->len;
 	btrfs_put_ordered_extent(ordered);
 	btrfs_put_ordered_extent(ordered);
+
+out_test:
+	/*
+	 * our bio might span multiple ordered extents.  If we haven't
+	 * completed the accounting for the whole dio, go back and try again
+	 */
+	if (ordered_offset < dip->logical_offset + dip->bytes) {
+		ordered_bytes = dip->logical_offset + dip->bytes -
+			ordered_offset;
+		goto again;
+	}
 out_done:
 	bio->bi_private = dip->private;
 
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index f4621f6deca1..ae7737e352c9 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -248,6 +248,73 @@ int btrfs_add_ordered_sum(struct inode *inode,
 	return 0;
 }
 
+/*
+ * this is used to account for finished IO across a given range
+ * of the file.  The IO may span ordered extents.  If
+ * a given ordered_extent is completely done, 1 is returned, otherwise
+ * 0.
+ *
+ * test_and_set_bit on a flag in the struct btrfs_ordered_extent is used
+ * to make sure this function only returns 1 once for a given ordered extent.
+ *
+ * file_offset is updated to one byte past the range that is recorded as
+ * complete.  This allows you to walk forward in the file.
+ */
+int btrfs_dec_test_first_ordered_pending(struct inode *inode,
+				   struct btrfs_ordered_extent **cached,
+				   u64 *file_offset, u64 io_size)
+{
+	struct btrfs_ordered_inode_tree *tree;
+	struct rb_node *node;
+	struct btrfs_ordered_extent *entry = NULL;
+	int ret;
+	u64 dec_end;
+	u64 dec_start;
+	u64 to_dec;
+
+	tree = &BTRFS_I(inode)->ordered_tree;
+	spin_lock(&tree->lock);
+	node = tree_search(tree, *file_offset);
+	if (!node) {
+		ret = 1;
+		goto out;
+	}
+
+	entry = rb_entry(node, struct btrfs_ordered_extent, rb_node);
+	if (!offset_in_entry(entry, *file_offset)) {
+		ret = 1;
+		goto out;
+	}
+
+	dec_start = max(*file_offset, entry->file_offset);
+	dec_end = min(*file_offset + io_size, entry->file_offset +
+		      entry->len);
+	*file_offset = dec_end;
+	if (dec_start > dec_end) {
+		printk(KERN_CRIT "bad ordering dec_start %llu end %llu\n",
+		       (unsigned long long)dec_start,
+		       (unsigned long long)dec_end);
+	}
+	to_dec = dec_end - dec_start;
+	if (to_dec > entry->bytes_left) {
+		printk(KERN_CRIT "bad ordered accounting left %llu size %llu\n",
+		       (unsigned long long)entry->bytes_left,
+		       (unsigned long long)to_dec);
+	}
+	entry->bytes_left -= to_dec;
+	if (entry->bytes_left == 0)
+		ret = test_and_set_bit(BTRFS_ORDERED_IO_DONE, &entry->flags);
+	else
+		ret = 1;
+out:
+	if (!ret && cached && entry) {
+		*cached = entry;
+		atomic_inc(&entry->refs);
+	}
+	spin_unlock(&tree->lock);
+	return ret == 0;
+}
+
 /*
  * this is used to account for finished IO across a given range
  * of the file.  The IO should not span ordered extents.  If
diff --git a/fs/btrfs/ordered-data.h b/fs/btrfs/ordered-data.h
index 8ac365492a3f..61dca83119dd 100644
--- a/fs/btrfs/ordered-data.h
+++ b/fs/btrfs/ordered-data.h
@@ -141,6 +141,9 @@ int btrfs_remove_ordered_extent(struct inode *inode,
 int btrfs_dec_test_ordered_pending(struct inode *inode,
 				   struct btrfs_ordered_extent **cached,
 				   u64 file_offset, u64 io_size);
+int btrfs_dec_test_first_ordered_pending(struct inode *inode,
+				   struct btrfs_ordered_extent **cached,
+				   u64 *file_offset, u64 io_size);
 int btrfs_add_ordered_extent(struct inode *inode, u64 file_offset,
 			     u64 start, u64 len, u64 disk_len, int type);
 int btrfs_add_ordered_extent_dio(struct inode *inode, u64 file_offset,

From 5c7e57f7cddb83d81d83fefa5822dfe80891130e Mon Sep 17 00:00:00 2001
From: Breno Leitao <breno@cafe.(none)>
Date: Fri, 26 Nov 2010 07:26:27 +0000
Subject: [PATCH 1010/1066] ehea: Add some info messages and fix an issue

This patch adds some debug information about ehea not being able to
allocate enough spaces. Also it correctly updates the amount of available
skb.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ehea/ehea_main.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 182b2a7be8dc..3d0af08483a1 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -400,6 +400,7 @@ static void ehea_refill_rq1(struct ehea_port_res *pr, int index, int nr_of_wqes)
 			skb_arr_rq1[index] = netdev_alloc_skb(dev,
 							      EHEA_L_PKT_SIZE);
 			if (!skb_arr_rq1[index]) {
+				ehea_info("Unable to allocate enough skb in the array\n");
 				pr->rq1_skba.os_skbs = fill_wqes - i;
 				break;
 			}
@@ -422,13 +423,20 @@ static void ehea_init_fill_rq1(struct ehea_port_res *pr, int nr_rq1a)
 	struct net_device *dev = pr->port->netdev;
 	int i;
 
-	for (i = 0; i < pr->rq1_skba.len; i++) {
+	if (nr_rq1a > pr->rq1_skba.len) {
+		ehea_error("NR_RQ1A bigger than skb array len\n");
+		return;
+	}
+
+	for (i = 0; i < nr_rq1a; i++) {
 		skb_arr_rq1[i] = netdev_alloc_skb(dev, EHEA_L_PKT_SIZE);
-		if (!skb_arr_rq1[i])
+		if (!skb_arr_rq1[i]) {
+			ehea_info("No enough memory to allocate skb array\n");
 			break;
+		}
 	}
 	/* Ring doorbell */
-	ehea_update_rq1a(pr->qp, nr_rq1a);
+	ehea_update_rq1a(pr->qp, i);
 }
 
 static int ehea_refill_rq_def(struct ehea_port_res *pr,
@@ -735,8 +743,10 @@ static int ehea_proc_rwqes(struct net_device *dev,
 
 					skb = netdev_alloc_skb(dev,
 							       EHEA_L_PKT_SIZE);
-					if (!skb)
+					if (!skb) {
+						ehea_info("Not enough memory to allocate skb\n");
 						break;
+					}
 				}
 				skb_copy_to_linear_data(skb, ((char *)cqe) + 64,
 						 cqe->num_bytes_transfered - 4);

From b4ff3c90e6066bacc8a92111752fe9e4f4c45cca Mon Sep 17 00:00:00 2001
From: Nagendra Tomar <tomer_iisc@yahoo.com>
Date: Fri, 26 Nov 2010 14:26:27 +0000
Subject: [PATCH 1011/1066] inet: Fix __inet_inherit_port() to correctly
 increment bsockets and num_owners

inet sockets corresponding to passive connections are added to the bind hash
using ___inet_inherit_port(). These sockets are later removed from the bind
hash using __inet_put_port(). These two functions are not exactly symmetrical.
__inet_put_port() decrements hashinfo->bsockets and tb->num_owners, whereas
___inet_inherit_port() does not increment them. This results in both of these
going to -ve values.

This patch fixes this by calling inet_bind_hash() from ___inet_inherit_port(),
which does the right thing.

'bsockets' and 'num_owners' were introduced by commit a9d8f9110d7e953c
(inet: Allowing more than 64k connections and heavily optimize bind(0))

Signed-off-by: Nagendra Singh Tomar <tomer_iisc@yahoo.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/inet_hashtables.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 1b344f30b463..3c0369a3a663 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -133,8 +133,7 @@ int __inet_inherit_port(struct sock *sk, struct sock *child)
 			}
 		}
 	}
-	sk_add_bind_node(child, &tb->owners);
-	inet_csk(child)->icsk_bind_hash = tb;
+	inet_bind_hash(child, tb, port);
 	spin_unlock(&head->lock);
 
 	return 0;

From d830418e4085d65b3f8bad3216a37bc986ecd17d Mon Sep 17 00:00:00 2001
From: Yang Li <leoli@freescale.com>
Date: Thu, 25 Nov 2010 23:29:58 +0000
Subject: [PATCH 1012/1066] ucc_geth: fix ucc halt problem in half duplex mode

In commit 58933c64(ucc_geth: Fix the wrong the Rx/Tx FIFO size),
the UCC_GETH_UTFTT_INIT is set to 512 based on the recommendation
of the QE Reference Manual.  But that will sometimes cause tx halt
while working in half duplex mode.

According to errata draft QE_GENERAL-A003(High Tx Virtual FIFO
threshold size can cause UCC to halt), setting UTFTT less than
[(UTFS x (M - 8)/M) - 128] will prevent this from happening
(M is the minimum buffer size).

The patch changes UTFTT back to 256.

Signed-off-by: Li Yang <leoli@freescale.com>
Cc: Jean-Denis Boyer <jdboyer@media5corp.com>
Cc: Andreas Schmitz <Andreas.Schmitz@riedel.net>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ucc_geth.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 05a95586f3c5..055b87ab4f07 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -899,7 +899,8 @@ struct ucc_geth_hardware_statistics {
 #define UCC_GETH_UTFS_INIT                      512	/* Tx virtual FIFO size
 							 */
 #define UCC_GETH_UTFET_INIT                     256	/* 1/2 utfs */
-#define UCC_GETH_UTFTT_INIT                     512
+#define UCC_GETH_UTFTT_INIT                     256	/* 1/2 utfs
+							   due to errata */
 /* Gigabit Ethernet (1000 Mbps) */
 #define UCC_GETH_URFS_GIGA_INIT                 4096/*2048*/	/* Rx virtual
 								   FIFO size */

From 5a92bc88cef279261d3f138e25850c122df67045 Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Mon, 29 Nov 2010 09:49:11 -0500
Subject: [PATCH 1013/1066] Btrfs: don't use migrate page without
 CONFIG_MIGRATION

Fixes compile error

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/disk-io.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 57c9d8eeb7dc..33b6d459494c 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -712,8 +712,11 @@ static int btree_migratepage(struct address_space *mapping,
 	if (page_has_private(page) &&
 	    !try_to_release_page(page, GFP_KERNEL))
 		return -EAGAIN;
-
+#ifdef CONFIG_MIGRATION
 	return migrate_page(mapping, newpage, page);
+#else
+	return -ENOSYS;
+#endif
 }
 
 static int btree_writepage(struct page *page, struct writeback_control *wbc)
@@ -821,7 +824,9 @@ static const struct address_space_operations btree_aops = {
 	.releasepage	= btree_releasepage,
 	.invalidatepage = btree_invalidatepage,
 	.sync_page	= block_sync_page,
+#ifdef CONFIG_MIGRATION
 	.migratepage	= btree_migratepage,
+#endif
 };
 
 int readahead_tree_block(struct btrfs_root *root, u64 bytenr, u32 blocksize,

From a1dcfcb7f2d08717325157ed3c1db2362d6eb8c9 Mon Sep 17 00:00:00 2001
From: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Date: Sun, 21 Nov 2010 19:58:37 +0000
Subject: [PATCH 1014/1066] pch_gbe dreiver: chang author

This driver's AUTHOR was changed to "Toshiharu Okada" from "Masayuki Ohtake".
I update the Kconfig, renamed "Topcliff" to "EG20T".

Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/Kconfig                | 6 +++---
 drivers/net/pch_gbe/pch_gbe_main.c | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f6668cdaac85..a445a0492c52 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2543,10 +2543,10 @@ config PCH_GBE
 	depends on PCI
 	select MII
 	---help---
-	  This is a gigabit ethernet driver for Topcliff PCH.
-	  Topcliff PCH is the platform controller hub that is used in Intel's
+	  This is a gigabit ethernet driver for EG20T PCH.
+	  EG20T PCH is the platform controller hub that is used in Intel's
 	  general embedded platform.
-	  Topcliff PCH has Gigabit Ethernet interface.
+	  EG20T PCH has Gigabit Ethernet interface.
 	  Using this interface, it is able to access system devices connected
 	  to Gigabit Ethernet.
 	  This driver enables Gigabit Ethernet function.
diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c
index 472056b47440..03a1d280105f 100644
--- a/drivers/net/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/pch_gbe/pch_gbe_main.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 1999 - 2010 Intel Corporation.
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
  *
  * This code was derived from the Intel e1000e Linux driver.
  *
@@ -2464,8 +2464,8 @@ static void __exit pch_gbe_exit_module(void)
 module_init(pch_gbe_init_module);
 module_exit(pch_gbe_exit_module);
 
-MODULE_DESCRIPTION("OKI semiconductor PCH Gigabit ethernet Driver");
-MODULE_AUTHOR("OKI semiconductor, <masa-korg@dsn.okisemi.com>");
+MODULE_DESCRIPTION("EG20T PCH Gigabit ethernet Driver");
+MODULE_AUTHOR("OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com>");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 MODULE_DEVICE_TABLE(pci, pch_gbe_pcidev_id);

From 50a4205333c5e545551f1f82b3004ca635407c5c Mon Sep 17 00:00:00 2001
From: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Date: Mon, 29 Nov 2010 06:18:07 +0000
Subject: [PATCH 1015/1066] pch_gbe driver: The wrong of initializer entry

The wrong of initializer entry was modified.

Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/pch_gbe/pch_gbe_param.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/pch_gbe/pch_gbe_param.c b/drivers/net/pch_gbe/pch_gbe_param.c
index 2510146fc560..ef0996a0eaaa 100644
--- a/drivers/net/pch_gbe/pch_gbe_param.c
+++ b/drivers/net/pch_gbe/pch_gbe_param.c
@@ -434,8 +434,8 @@ void pch_gbe_check_options(struct pch_gbe_adapter *adapter)
 			.err  = "using default of "
 				__MODULE_STRING(PCH_GBE_DEFAULT_TXD),
 			.def  = PCH_GBE_DEFAULT_TXD,
-			.arg  = { .r = { .min = PCH_GBE_MIN_TXD } },
-			.arg  = { .r = { .max = PCH_GBE_MAX_TXD } }
+			.arg  = { .r = { .min = PCH_GBE_MIN_TXD,
+					 .max = PCH_GBE_MAX_TXD } }
 		};
 		struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring;
 		tx_ring->count = TxDescriptors;
@@ -450,8 +450,8 @@ void pch_gbe_check_options(struct pch_gbe_adapter *adapter)
 			.err  = "using default of "
 				__MODULE_STRING(PCH_GBE_DEFAULT_RXD),
 			.def  = PCH_GBE_DEFAULT_RXD,
-			.arg  = { .r = { .min = PCH_GBE_MIN_RXD } },
-			.arg  = { .r = { .max = PCH_GBE_MAX_RXD } }
+			.arg  = { .r = { .min = PCH_GBE_MIN_RXD,
+					 .max = PCH_GBE_MAX_RXD } }
 		};
 		struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring;
 		rx_ring->count = RxDescriptors;

From 25888e30319f8896fc656fc68643e6a078263060 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Thu, 25 Nov 2010 04:11:39 +0000
Subject: [PATCH 1016/1066] af_unix: limit recursion level
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Its easy to eat all kernel memory and trigger NMI watchdog, using an
exploit program that queues unix sockets on top of others.

lkml ref : http://lkml.org/lkml/2010/11/25/8

This mechanism is used in applications, one choice we have is to have a
recursion limit.

Other limits might be needed as well (if we queue other types of files),
since the passfd mechanism is currently limited by socket receive queue
sizes only.

Add a recursion_level to unix socket, allowing up to 4 levels.

Each time we send an unix socket through sendfd mechanism, we copy its
recursion level (plus one) to receiver. This recursion level is cleared
when socket receive queue is emptied.

Reported-by: Марк Коренберг <socketpair@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/af_unix.h |  2 ++
 net/unix/af_unix.c    | 37 ++++++++++++++++++++++++++++++++-----
 net/unix/garbage.c    |  2 +-
 3 files changed, 35 insertions(+), 6 deletions(-)

diff --git a/include/net/af_unix.h b/include/net/af_unix.h
index 90c9e2872f27..18e5c3f67580 100644
--- a/include/net/af_unix.h
+++ b/include/net/af_unix.h
@@ -10,6 +10,7 @@ extern void unix_inflight(struct file *fp);
 extern void unix_notinflight(struct file *fp);
 extern void unix_gc(void);
 extern void wait_for_unix_gc(void);
+extern struct sock *unix_get_socket(struct file *filp);
 
 #define UNIX_HASH_SIZE	256
 
@@ -56,6 +57,7 @@ struct unix_sock {
 	spinlock_t		lock;
 	unsigned int		gc_candidate : 1;
 	unsigned int		gc_maybe_cycle : 1;
+	unsigned char		recursion_level;
 	struct socket_wq	peer_wq;
 };
 #define unix_sk(__sk) ((struct unix_sock *)__sk)
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 3c95304a0817..2268e6798124 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1343,9 +1343,25 @@ static void unix_destruct_scm(struct sk_buff *skb)
 	sock_wfree(skb);
 }
 
+#define MAX_RECURSION_LEVEL 4
+
 static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb)
 {
 	int i;
+	unsigned char max_level = 0;
+	int unix_sock_count = 0;
+
+	for (i = scm->fp->count - 1; i >= 0; i--) {
+		struct sock *sk = unix_get_socket(scm->fp->fp[i]);
+
+		if (sk) {
+			unix_sock_count++;
+			max_level = max(max_level,
+					unix_sk(sk)->recursion_level);
+		}
+	}
+	if (unlikely(max_level > MAX_RECURSION_LEVEL))
+		return -ETOOMANYREFS;
 
 	/*
 	 * Need to duplicate file references for the sake of garbage
@@ -1356,9 +1372,11 @@ static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb)
 	if (!UNIXCB(skb).fp)
 		return -ENOMEM;
 
-	for (i = scm->fp->count-1; i >= 0; i--)
-		unix_inflight(scm->fp->fp[i]);
-	return 0;
+	if (unix_sock_count) {
+		for (i = scm->fp->count - 1; i >= 0; i--)
+			unix_inflight(scm->fp->fp[i]);
+	}
+	return max_level;
 }
 
 static int unix_scm_to_skb(struct scm_cookie *scm, struct sk_buff *skb, bool send_fds)
@@ -1393,6 +1411,7 @@ static int unix_dgram_sendmsg(struct kiocb *kiocb, struct socket *sock,
 	struct sk_buff *skb;
 	long timeo;
 	struct scm_cookie tmp_scm;
+	int max_level;
 
 	if (NULL == siocb->scm)
 		siocb->scm = &tmp_scm;
@@ -1431,8 +1450,9 @@ static int unix_dgram_sendmsg(struct kiocb *kiocb, struct socket *sock,
 		goto out;
 
 	err = unix_scm_to_skb(siocb->scm, skb, true);
-	if (err)
+	if (err < 0)
 		goto out_free;
+	max_level = err + 1;
 	unix_get_secdata(siocb->scm, skb);
 
 	skb_reset_transport_header(skb);
@@ -1514,6 +1534,8 @@ restart:
 	if (sock_flag(other, SOCK_RCVTSTAMP))
 		__net_timestamp(skb);
 	skb_queue_tail(&other->sk_receive_queue, skb);
+	if (max_level > unix_sk(other)->recursion_level)
+		unix_sk(other)->recursion_level = max_level;
 	unix_state_unlock(other);
 	other->sk_data_ready(other, len);
 	sock_put(other);
@@ -1544,6 +1566,7 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock,
 	int sent = 0;
 	struct scm_cookie tmp_scm;
 	bool fds_sent = false;
+	int max_level;
 
 	if (NULL == siocb->scm)
 		siocb->scm = &tmp_scm;
@@ -1607,10 +1630,11 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock,
 
 		/* Only send the fds in the first buffer */
 		err = unix_scm_to_skb(siocb->scm, skb, !fds_sent);
-		if (err) {
+		if (err < 0) {
 			kfree_skb(skb);
 			goto out_err;
 		}
+		max_level = err + 1;
 		fds_sent = true;
 
 		err = memcpy_fromiovec(skb_put(skb, size), msg->msg_iov, size);
@@ -1626,6 +1650,8 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock,
 			goto pipe_err_free;
 
 		skb_queue_tail(&other->sk_receive_queue, skb);
+		if (max_level > unix_sk(other)->recursion_level)
+			unix_sk(other)->recursion_level = max_level;
 		unix_state_unlock(other);
 		other->sk_data_ready(other, size);
 		sent += size;
@@ -1845,6 +1871,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock,
 		unix_state_lock(sk);
 		skb = skb_dequeue(&sk->sk_receive_queue);
 		if (skb == NULL) {
+			unix_sk(sk)->recursion_level = 0;
 			if (copied >= target)
 				goto unlock;
 
diff --git a/net/unix/garbage.c b/net/unix/garbage.c
index 40df93d1cf35..f89f83bf828e 100644
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -96,7 +96,7 @@ static DECLARE_WAIT_QUEUE_HEAD(unix_gc_wait);
 unsigned int unix_tot_inflight;
 
 
-static struct sock *unix_get_socket(struct file *filp)
+struct sock *unix_get_socket(struct file *filp)
 {
 	struct sock *u_sock = NULL;
 	struct inode *inode = filp->f_path.dentry->d_inode;

From 3f0d3d016d89a5efb8b926d4707eb21fa13f3d27 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg@redhat.com>
Date: Thu, 21 Oct 2010 17:42:40 -0400
Subject: [PATCH 1017/1066] tpm: Autodetect itpm devices

Some Lenovos have TPMs that require a quirk to function correctly. This can
be autodetected by checking whether the device has a _HID of INTC0102. This
is an invalid PNPid, and as such is discarded by the pnp layer - however
it's still present in the ACPI code, so we can pull it out that way. This
means that the quirk won't be automatically applied on non-ACPI systems,
but without ACPI we don't have any way to identify the chip anyway so I
don't think that's a great concern.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Tested-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: James Morris <jmorris@namei.org>
---
 drivers/char/tpm/tpm_tis.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 1030f8420137..c17a305ecb28 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -25,6 +25,7 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/wait.h>
+#include <linux/acpi.h>
 #include "tpm.h"
 
 #define TPM_HEADER_SIZE 10
@@ -78,6 +79,26 @@ enum tis_defaults {
 static LIST_HEAD(tis_chips);
 static DEFINE_SPINLOCK(tis_lock);
 
+#ifdef CONFIG_ACPI
+static int is_itpm(struct pnp_dev *dev)
+{
+	struct acpi_device *acpi = pnp_acpi_device(dev);
+	struct acpi_hardware_id *id;
+
+	list_for_each_entry(id, &acpi->pnp.ids, list) {
+		if (!strcmp("INTC0102", id->id))
+			return 1;
+	}
+
+	return 0;
+}
+#else
+static int is_itpm(struct pnp_dev *dev)
+{
+	return 0;
+}
+#endif
+
 static int check_locality(struct tpm_chip *chip, int l)
 {
 	if ((ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
@@ -472,6 +493,9 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
 		 "1.2 TPM (device-id 0x%X, rev-id %d)\n",
 		 vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
 
+	if (is_itpm(to_pnp_dev(dev)))
+		itpm = 1;
+
 	if (itpm)
 		dev_info(dev, "Intel iTPM workaround enabled\n");
 

From bcb38ceb225f5d5b2198a2755277cd441ed1e82b Mon Sep 17 00:00:00 2001
From: Dave Airlie <airlied@redhat.com>
Date: Tue, 30 Nov 2010 09:15:46 +1000
Subject: [PATCH 1018/1066] Revert "debug_locks: set oops_in_progress if we
 will log messages."

This reverts commit e0fdace10e75dac67d906213b780ff1b1a4cc360.

On-list discussion seems to suggest that the robustness fixes for printk
make this unnecessary and DaveM has also agreed in person at Kernel Summit
and on list.

The main problem with this code is once we hit a lockdep splat we always
keep oops_in_progress set, the console layer uses oops_in_progress with KMS
to decide when it should be showing the oops and not showing X, so it causes
problems around suspend/resume time when a userspace resume can cause a console
switch away from X, only if oops_in_progress is set (which is what we want
if an oops actually is in progress, but not because we had a lockdep splat
2 days prior).

Cc: David S Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/debug_locks.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/lib/debug_locks.c b/lib/debug_locks.c
index 5bf0020b9248..b1c177307677 100644
--- a/lib/debug_locks.c
+++ b/lib/debug_locks.c
@@ -8,7 +8,6 @@
  *
  *  Copyright (C) 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
  */
-#include <linux/kernel.h>
 #include <linux/rwsem.h>
 #include <linux/mutex.h>
 #include <linux/module.h>
@@ -39,7 +38,6 @@ int debug_locks_off(void)
 {
 	if (__debug_locks_off()) {
 		if (!debug_locks_silent) {
-			oops_in_progress = 1;
 			console_verbose();
 			return 1;
 		}

From f2e785ed5fb8e5fe5063ee2ba1c8f150396c53c6 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Fri, 26 Nov 2010 15:38:45 +0100
Subject: [PATCH 1019/1066] powerpc: Use call_rcu_sched() for pagetables

PowerPC relies on IRQ-disable to guard against RCU quiecent states,
use the appropriate RCU call version.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/pgtable.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index 2c7e801ab20b..6a3997f98dfb 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -92,7 +92,7 @@ static void pte_free_rcu_callback(struct rcu_head *head)
 
 static void pte_free_submit(struct pte_freelist_batch *batch)
 {
-	call_rcu(&batch->rcu, pte_free_rcu_callback);
+	call_rcu_sched(&batch->rcu, pte_free_rcu_callback);
 }
 
 void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift)

From e8a7e48bb248a1196484d3f8afa53bded2b24e71 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 29 Nov 2010 20:42:04 -0800
Subject: [PATCH 1020/1066] Linux 2.6.37-rc4

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index b31d21377e4c..9e3c89030f5c 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 37
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

From b94ca0792d49f5856570ba66f53acd69cd0917fc Mon Sep 17 00:00:00 2001
From: Eric Benard <eric@eukrea.com>
Date: Fri, 15 Oct 2010 11:27:17 +0200
Subject: [PATCH 1021/1066] at91: merge all at91rm9200 defconfig in one single
 file

About all options present in each file are activated
in the single file.

Signed-off-by: Eric Benard <eric@eukrea.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 arch/arm/configs/at91rm9200_defconfig   | 341 ++++++++++++++++++++++++
 arch/arm/configs/at91rm9200dk_defconfig |  72 -----
 arch/arm/configs/at91rm9200ek_defconfig |  73 -----
 arch/arm/configs/ateb9200_defconfig     | 131 ---------
 arch/arm/configs/carmeva_defconfig      |  47 ----
 arch/arm/configs/cpuat91_defconfig      | 112 --------
 arch/arm/configs/csb337_defconfig       | 104 --------
 arch/arm/configs/csb637_defconfig       |  98 -------
 arch/arm/configs/ecbat91_defconfig      |  99 -------
 arch/arm/configs/kafa_defconfig         |  61 -----
 arch/arm/configs/kb9202_defconfig       | 127 ---------
 arch/arm/configs/onearm_defconfig       |  80 ------
 arch/arm/configs/picotux200_defconfig   | 242 -----------------
 arch/arm/configs/yl9200_defconfig       | 137 ----------
 14 files changed, 341 insertions(+), 1383 deletions(-)
 create mode 100644 arch/arm/configs/at91rm9200_defconfig
 delete mode 100644 arch/arm/configs/at91rm9200dk_defconfig
 delete mode 100644 arch/arm/configs/at91rm9200ek_defconfig
 delete mode 100644 arch/arm/configs/ateb9200_defconfig
 delete mode 100644 arch/arm/configs/carmeva_defconfig
 delete mode 100644 arch/arm/configs/cpuat91_defconfig
 delete mode 100644 arch/arm/configs/csb337_defconfig
 delete mode 100644 arch/arm/configs/csb637_defconfig
 delete mode 100644 arch/arm/configs/ecbat91_defconfig
 delete mode 100644 arch/arm/configs/kafa_defconfig
 delete mode 100644 arch/arm/configs/kb9202_defconfig
 delete mode 100644 arch/arm/configs/onearm_defconfig
 delete mode 100644 arch/arm/configs/picotux200_defconfig
 delete mode 100644 arch/arm/configs/yl9200_defconfig

diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig
new file mode 100644
index 000000000000..38cb7c985426
--- /dev/null
+++ b/arch/arm/configs/at91rm9200_defconfig
@@ -0,0 +1,341 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_MACH_ONEARM=y
+CONFIG_ARCH_AT91RM9200DK=y
+CONFIG_MACH_AT91RM9200EK=y
+CONFIG_MACH_CSB337=y
+CONFIG_MACH_CSB637=y
+CONFIG_MACH_CARMEVA=y
+CONFIG_MACH_ATEB9200=y
+CONFIG_MACH_KB9200=y
+CONFIG_MACH_PICOTUX2XX=y
+CONFIG_MACH_KAFA=y
+CONFIG_MACH_ECBAT91=y
+CONFIG_MACH_YL9200=y
+CONFIG_MACH_CPUAT91=y
+CONFIG_MACH_ECO920=y
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+# CONFIG_ARM_THUMB is not set
+CONFIG_PCCARD=y
+CONFIG_AT91_CF=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ZBOOT_ROM_TEXT=0x10000000
+CONFIG_ZBOOT_ROM_BSS=0x20040000
+CONFIG_KEXEC=y
+CONFIG_FPE_NWFPE=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_LEGACY=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_PHYLIB=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_BITBANG=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HWMON=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_S1D13XXX=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_DISPLAY_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_KEYSPAN=y
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_MCT_U232=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_MMC=y
+CONFIG_MMC_AT91=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_REISERFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=m
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_CRAMFS=y
+CONFIG_MINIX_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_SMB_FS=m
+CONFIG_CIFS=m
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_SHA1=y
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
deleted file mode 100644
index 4438e64f3bfb..000000000000
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200DK=y
-CONFIG_MACH_ECO920=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
deleted file mode 100644
index ccd517c64bc7..000000000000
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ /dev/null
@@ -1,73 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_AT91RM9200EK=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_S1D13XXX=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
deleted file mode 100644
index 1b0e9a1689bb..000000000000
--- a/arch/arm/configs/ateb9200_defconfig
+++ /dev/null
@@ -1,131 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ATEB9200=y
-CONFIG_PCCARD=m
-CONFIG_AT91_CF=m
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_TUN=m
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_GL620A=y
-CONFIG_USB_NET_PLUSB=y
-CONFIG_USB_NET_RNDIS_HOST=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_GPIO=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=m
-CONFIG_MMC_DEBUG=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRC16=m
-CONFIG_LIBCRC32C=m
diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig
deleted file mode 100644
index ac64dbd8a49c..000000000000
--- a/arch/arm/configs/carmeva_defconfig
+++ /dev/null
@@ -1,47 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_HOTPLUG is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CARMEVA=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO=m
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_MMC=m
-CONFIG_MMC_DEBUG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig
deleted file mode 100644
index 022aeb55b676..000000000000
--- a/arch/arm/configs/cpuat91_defconfig
+++ /dev/null
@@ -1,112 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CPUAT91=y
-CONFIG_AT91_TIMER_HZ=100
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
deleted file mode 100644
index a24c448840c4..000000000000
--- a/arch/arm/configs/csb337_defconfig
+++ /dev/null
@@ -1,104 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CSB337=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_MCT_U232=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
-# CONFIG_RTC_INTF_SYSFS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
deleted file mode 100644
index 98552adac5fb..000000000000
--- a/arch/arm/configs/csb637_defconfig
+++ /dev/null
@@ -1,98 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CSB637=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_MCT_U232=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig
deleted file mode 100644
index 6bb6abdcea8c..000000000000
--- a/arch/arm/configs/ecbat91_defconfig
+++ /dev/null
@@ -1,99 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ECBAT91=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_AFS_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_REISERFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_SHA1=y
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
deleted file mode 100644
index 896dbe00dc6e..000000000000
--- a/arch/arm/configs/kafa_defconfig
+++ /dev/null
@@ -1,61 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_KAFA=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
deleted file mode 100644
index 9f906a85f5c2..000000000000
--- a/arch/arm/configs/kb9202_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_KB9200=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x10000000
-CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
deleted file mode 100644
index 1579857aeeaa..000000000000
--- a/arch/arm/configs/onearm_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ONEARM=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig
deleted file mode 100644
index 4c9afa478d57..000000000000
--- a/arch/arm/configs/picotux200_defconfig
+++ /dev/null
@@ -1,242 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=m
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_PICOTUX2XX=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_GPIO=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1029=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83791D=m
-CONFIG_SENSORS_W83792D=m
-CONFIG_SENSORS_W83793=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=m
-CONFIG_HID=m
-CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_MMC=m
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=m
-CONFIG_RTC_DRV_AT91RM9200=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=m
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_NLS_DEFAULT="utf-8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_LIBCRC32C=m
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
deleted file mode 100644
index 30c537f61089..000000000000
--- a/arch/arm/configs/yl9200_defconfig
+++ /dev/null
@@ -1,137 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200DK=y
-CONFIG_MACH_YL9200=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=3
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_ATMEL=y
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-CONFIG_REISERFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SLUB_DEBUG_ON=y
-CONFIG_DEBUG_KOBJECT=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y

From 8ae8cd978bc773e916e0b51a76fe3f096fa31069 Mon Sep 17 00:00:00 2001
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Fri, 19 Nov 2010 22:23:28 +0800
Subject: [PATCH 1022/1066] at91: Convert remaining boards to new-style UART
 initialization

Convert the following AT91RM9200-based boards to the new-style UART
initialization:
  - Ajeco 1ARM Single Board Computer
  - Sperry-Sun KAFA board
  - picotux 200

Remove the deprecated at91_init_serial

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
---
 arch/arm/mach-at91/at91rm9200_devices.c | 45 -------------------------
 arch/arm/mach-at91/board-1arm.c         | 26 +++++++-------
 arch/arm/mach-at91/board-kafa.c         | 21 +++++-------
 arch/arm/mach-at91/board-picotux200.c   | 23 ++++++-------
 arch/arm/mach-at91/include/mach/board.h |  6 ----
 5 files changed, 31 insertions(+), 90 deletions(-)

diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 9338825cfcd7..7b539228e0ef 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -1106,51 +1106,6 @@ static inline void configure_usart3_pins(unsigned pins)
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
 struct platform_device *atmel_default_console_device;	/* the serial console device */
 
-void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-{
-	int i;
-
-	/* Fill in list of supported UARTs */
-	for (i = 0; i < config->nr_tty; i++) {
-		switch (config->tty_map[i]) {
-			case 0:
-				configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91rm9200_uart0_device;
-				at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
-				break;
-			case 1:
-				configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
-				at91_uarts[i] = &at91rm9200_uart1_device;
-				at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
-				break;
-			case 2:
-				configure_usart2_pins(0);
-				at91_uarts[i] = &at91rm9200_uart2_device;
-				at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
-				break;
-			case 3:
-				configure_usart3_pins(0);
-				at91_uarts[i] = &at91rm9200_uart3_device;
-				at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
-				break;
-			case 4:
-				configure_dbgu_pins();
-				at91_uarts[i] = &at91rm9200_dbgu_device;
-				at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
-				break;
-			default:
-				continue;
-		}
-		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
-	}
-
-	/* Set serial console device */
-	if (config->console_tty < ATMEL_MAX_UART)
-		atmel_default_console_device = at91_uarts[config->console_tty];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 46bdc82d3fbf..8a3fc84847c1 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -39,24 +39,24 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata onearm_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 3,
-	.tty_map	= { 4, 0, 1, -1, -1 },		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init onearm_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&onearm_uart_config);
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init onearm_init_irq(void)
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index c0ce79d431a0..d2e1f4ec1fcc 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -39,17 +39,6 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata kafa_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 0, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init kafa_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
@@ -58,8 +47,14 @@ static void __init kafa_map_io(void)
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&kafa_uart_config);
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init kafa_init_irq(void)
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 9d833bbc592d..ac1a3b527b34 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -43,24 +43,21 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata picotux200_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init picotux200_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91rm9200_initialize(18432000, AT91RM9200_BGA);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&picotux200_uart_config);
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			  | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			  | ATMEL_UART_RI);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init picotux200_init_irq(void)
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 58528aa9c8a8..2b499eb343a1 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -137,13 +137,7 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de
 extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
 extern void __init at91_set_serial_console(unsigned portnr);
 
-struct at91_uart_config {
-	unsigned short	console_tty;	/* tty number of serial console */
-	unsigned short	nr_tty;		/* number of serial tty's */
-	short		tty_map[];	/* map UART to tty number */
-};
 extern struct platform_device *atmel_default_console_device;
-extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
 
 struct atmel_uart_data {
 	short			use_dma_tx;	/* use transmit DMA? */

From 8e79d2d4e7147eb6dfd075d7cb200c666566a9e0 Mon Sep 17 00:00:00 2001
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Fri, 19 Nov 2010 22:31:03 +0800
Subject: [PATCH 1023/1066] at91rm9200dk: fix warning: 'dk_mmc_data' defined
 but not used

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
---
 arch/arm/mach-at91/board-dk.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index e14f0e165680..16dfd0c38472 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -91,10 +91,12 @@ static struct at91_cf_data __initdata dk_cf_data = {
 	// .vcc_pin	= ... always powered
 };
 
+#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
 static struct at91_mmc_data __initdata dk_mmc_data = {
 	.slot_b		= 0,
 	.wire4		= 1,
 };
+#endif
 
 static struct spi_board_info dk_spi_devices[] = {
 	{	/* DataFlash chip */

From 55d83b0a6eb61d159a4a6d269745ee019f9f5f91 Mon Sep 17 00:00:00 2001
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Fri, 19 Nov 2010 22:31:35 +0800
Subject: [PATCH 1024/1066] at91rm9200ek: fix warning: 'ek_mmc_data' defined
 but not used

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
---
 arch/arm/mach-at91/board-ek.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 56e92c4bbc2a..6203cdff3571 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -84,12 +84,14 @@ static struct at91_udc_data __initdata ek_udc_data = {
 	.pullup_pin	= AT91_PIN_PD5,
 };
 
+#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
 static struct at91_mmc_data __initdata ek_mmc_data = {
 	.det_pin	= AT91_PIN_PB27,
 	.slot_b		= 0,
 	.wire4		= 1,
 	.wp_pin		= AT91_PIN_PA17,
 };
+#endif
 
 static struct spi_board_info ek_spi_devices[] = {
 	{	/* DataFlash chip */

From 985f554d8f0c2cf5bda5720921cb48654420d6b1 Mon Sep 17 00:00:00 2001
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Fri, 19 Nov 2010 22:34:38 +0800
Subject: [PATCH 1025/1066] at91: rename rm9200ek and rm9200dk board file name

to be a few more concistant with the other boards

as ek is for evaluation kit and dk for development kit

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
---
 arch/arm/mach-at91/Makefile                         | 4 ++--
 arch/arm/mach-at91/{board-dk.c => board-rm9200dk.c} | 2 +-
 arch/arm/mach-at91/{board-ek.c => board-rm9200ek.c} | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)
 rename arch/arm/mach-at91/{board-dk.c => board-rm9200dk.c} (99%)
 rename arch/arm/mach-at91/{board-ek.c => board-rm9200ek.c} (99%)

diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 821eb842795f..62d686f0b426 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -24,8 +24,8 @@ obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
-obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-dk.o
-obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-ek.o
+obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-rm9200dk.o
+obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-rm9200ek.o
 obj-$(CONFIG_MACH_CSB337)	+= board-csb337.o
 obj-$(CONFIG_MACH_CSB637)	+= board-csb637.o
 obj-$(CONFIG_MACH_CARMEVA)	+= board-carmeva.o
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-rm9200dk.c
similarity index 99%
rename from arch/arm/mach-at91/board-dk.c
rename to arch/arm/mach-at91/board-rm9200dk.c
index 16dfd0c38472..4c1047c8200d 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91/board-dk.c
+ * linux/arch/arm/mach-at91/board-rm9200dk.c
  *
  *  Copyright (C) 2005 SAN People
  *
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-rm9200ek.c
similarity index 99%
rename from arch/arm/mach-at91/board-ek.c
rename to arch/arm/mach-at91/board-rm9200ek.c
index 6203cdff3571..9df1be8818c0 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91/board-ek.c
+ * linux/arch/arm/mach-at91/board-rm9200ek.c
  *
  *  Copyright (C) 2005 SAN People
  *

From 82d5b5c8da769184a9bc2cc2adc90555f4aa90b0 Mon Sep 17 00:00:00 2001
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sun, 21 Nov 2010 10:31:19 +0800
Subject: [PATCH 1026/1066] at91/picotux200: remove commenting usb device and
 dataflash support

as based on http://www.picotux.com/pt200/picotux200.pdf
these board does not have such I/O

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 arch/arm/mach-at91/board-picotux200.c | 30 ---------------------------
 1 file changed, 30 deletions(-)

diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index ac1a3b527b34..55dad3a46547 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -74,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
 	.ports		= 1,
 };
 
-// static struct at91_udc_data __initdata picotux200_udc_data = {
-// 	.vbus_pin	= AT91_PIN_PD4,
-// 	.pullup_pin	= AT91_PIN_PD5,
-// };
-
 static struct at91_mmc_data __initdata picotux200_mmc_data = {
 	.det_pin	= AT91_PIN_PB27,
 	.slot_b		= 0,
@@ -86,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
 	.wp_pin		= AT91_PIN_PA17,
 };
 
-// static struct spi_board_info picotux200_spi_devices[] = {
-// 	{	/* DataFlash chip */
-// 		.modalias	= "mtd_dataflash",
-// 		.chip_select	= 0,
-// 		.max_speed_hz	= 15 * 1000 * 1000,
-// 	},
-// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-// 	{	/* DataFlash card */
-// 		.modalias	= "mtd_dataflash",
-// 		.chip_select	= 3,
-// 		.max_speed_hz	= 15 * 1000 * 1000,
-// 	},
-// #endif
-// };
-
 #define PICOTUX200_FLASH_BASE	AT91_CHIPSELECT_0
 #define PICOTUX200_FLASH_SIZE	SZ_4M
 
@@ -132,21 +112,11 @@ static void __init picotux200_board_init(void)
 	at91_add_device_eth(&picotux200_eth_data);
 	/* USB Host */
 	at91_add_device_usbh(&picotux200_usbh_data);
-	/* USB Device */
-	// at91_add_device_udc(&picotux200_udc_data);
-	// at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
-	/* SPI */
-	// at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-	/* DataFlash card */
-	at91_set_gpio_output(AT91_PIN_PB22, 0);
-#else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
 	at91_add_device_mmc(0, &picotux200_mmc_data);
-#endif
 	/* NOR Flash */
 	platform_device_register(&picotux200_flash);
 }

From 214b574ab81236e7740243985d63a1d6a61231a2 Mon Sep 17 00:00:00 2001
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sat, 20 Nov 2010 14:52:53 +0800
Subject: [PATCH 1027/1066] atmel_spi: fix warning In function
 'atmel_spi_dma_map_xfer'

passing argument 2 of 'dma_map_single' discards qualifiers from pointer target type

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 drivers/spi/atmel_spi.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 154529aacc03..a067046c9da2 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -352,8 +352,12 @@ atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
 
 	xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS;
 	if (xfer->tx_buf) {
+		/* tx_buf is a const void* where we need a void * for the dma
+		 * mapping */
+		void *nonconst_tx = (void *)xfer->tx_buf;
+
 		xfer->tx_dma = dma_map_single(dev,
-				(void *) xfer->tx_buf, xfer->len,
+				nonconst_tx, xfer->len,
 				DMA_TO_DEVICE);
 		if (dma_mapping_error(dev, xfer->tx_dma))
 			return -ENOMEM;

From 3b24f0950bc55ca604a9f0da3ca894f9315cb573 Mon Sep 17 00:00:00 2001
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sun, 21 Nov 2010 11:24:07 +0800
Subject: [PATCH 1028/1066] at91/board-yl-9200: fix typo in video support

for the epson frambuffer support it's CONFIG_FB_S1D13XXX
not CONFIG_FB_S1D135XX

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 arch/arm/mach-at91/board-yl-9200.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 89df00a9d2f7..e0f0080eb639 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -387,7 +387,7 @@ static struct spi_board_info yl9200_spi_devices[] = {
  * EPSON S1D13806 FB (discontinued chip)
  * EPSON S1D13506 FB
  */
-#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
 #include <video/s1d13xxxfb.h>
 
 

From 37a09f07459753e7c98d4e21f1c61e8756923f81 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Tue, 30 Nov 2010 12:42:34 -0500
Subject: [PATCH 1029/1066] NFS: Fix a readdirplus bug

When comparing filehandles in the helper nfs_same_file(), we should not be
using 'strncmp()': filehandles are not null terminated strings.

Instead, we should just use the existing helper nfs_compare_fh().

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/nfs/dir.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 8ea4a4180a87..f0a384e2ae63 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -395,13 +395,9 @@ int xdr_decode(nfs_readdir_descriptor_t *desc, struct nfs_entry *entry, struct x
 static
 int nfs_same_file(struct dentry *dentry, struct nfs_entry *entry)
 {
-	struct nfs_inode *node;
 	if (dentry->d_inode == NULL)
 		goto different;
-	node = NFS_I(dentry->d_inode);
-	if (node->fh.size != entry->fh->size)
-		goto different;
-	if (strncmp(node->fh.data, entry->fh->data, node->fh.size) != 0)
+	if (nfs_compare_fh(entry->fh, NFS_FH(dentry->d_inode)) != 0)
 		goto different;
 	return 1;
 different:

From 3c77f845722158206a7209c45ccddc264d19319c Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@redhat.com>
Date: Tue, 30 Nov 2010 20:55:34 +0100
Subject: [PATCH 1030/1066] exec: make argv/envp memory visible to oom-killer

Brad Spengler published a local memory-allocation DoS that
evades the OOM-killer (though not the virtual memory RLIMIT):
http://www.grsecurity.net/~spender/64bit_dos.c

execve()->copy_strings() can allocate a lot of memory, but
this is not visible to oom-killer, nobody can see the nascent
bprm->mm and take it into account.

With this patch get_arg_page() increments current's MM_ANONPAGES
counter every time we allocate the new page for argv/envp. When
do_execve() succeds or fails, we change this counter back.

Technically this is not 100% correct, we can't know if the new
page is swapped out and turn MM_ANONPAGES into MM_SWAPENTS, but
I don't think this really matters and everything becomes correct
once exec changes ->mm or fails.

Reported-by: Brad Spengler <spender@grsecurity.net>
Reviewed-and-discussed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c               | 32 ++++++++++++++++++++++++++++++--
 include/linux/binfmts.h |  1 +
 2 files changed, 31 insertions(+), 2 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index 99d33a1371e9..4303b9035fe7 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -164,6 +164,25 @@ out:
 
 #ifdef CONFIG_MMU
 
+static void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
+{
+	struct mm_struct *mm = current->mm;
+	long diff = (long)(pages - bprm->vma_pages);
+
+	if (!mm || !diff)
+		return;
+
+	bprm->vma_pages = pages;
+
+#ifdef SPLIT_RSS_COUNTING
+	add_mm_counter(mm, MM_ANONPAGES, diff);
+#else
+	spin_lock(&mm->page_table_lock);
+	add_mm_counter(mm, MM_ANONPAGES, diff);
+	spin_unlock(&mm->page_table_lock);
+#endif
+}
+
 static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
 		int write)
 {
@@ -186,6 +205,8 @@ static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
 		unsigned long size = bprm->vma->vm_end - bprm->vma->vm_start;
 		struct rlimit *rlim;
 
+		acct_arg_size(bprm, size / PAGE_SIZE);
+
 		/*
 		 * We've historically supported up to 32 pages (ARG_MAX)
 		 * of argument strings even with small stacks
@@ -276,6 +297,10 @@ static bool valid_arg_len(struct linux_binprm *bprm, long len)
 
 #else
 
+static inline void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
+{
+}
+
 static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
 		int write)
 {
@@ -1003,6 +1028,7 @@ int flush_old_exec(struct linux_binprm * bprm)
 	/*
 	 * Release all of the old mmap stuff
 	 */
+	acct_arg_size(bprm, 0);
 	retval = exec_mmap(bprm->mm);
 	if (retval)
 		goto out;
@@ -1426,8 +1452,10 @@ int do_execve(const char * filename,
 	return retval;
 
 out:
-	if (bprm->mm)
-		mmput (bprm->mm);
+	if (bprm->mm) {
+		acct_arg_size(bprm, 0);
+		mmput(bprm->mm);
+	}
 
 out_file:
 	if (bprm->file) {
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index a065612fc928..7c87796d20da 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -29,6 +29,7 @@ struct linux_binprm{
 	char buf[BINPRM_BUF_SIZE];
 #ifdef CONFIG_MMU
 	struct vm_area_struct *vma;
+	unsigned long vma_pages;
 #else
 # define MAX_ARG_PAGES	32
 	struct page *page[MAX_ARG_PAGES];

From 114279be2120a916e8a04feeb2ac976a10016f2f Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@redhat.com>
Date: Tue, 30 Nov 2010 20:56:02 +0100
Subject: [PATCH 1031/1066] exec: copy-and-paste the fixes into
 compat_do_execve() paths

Note: this patch targets 2.6.37 and tries to be as simple as possible.
That is why it adds more copy-and-paste horror into fs/compat.c and
uglifies fs/exec.c, this will be cleanuped later.

compat_copy_strings() plays with bprm->vma/mm directly and thus has
two problems: it lacks the RLIMIT_STACK check and argv/envp memory
is not visible to oom killer.

Export acct_arg_size() and get_arg_page(), change compat_copy_strings()
to use get_arg_page(), change compat_do_execve() to do acct_arg_size(0)
as do_execve() does.

Add the fatal_signal_pending/cond_resched checks into compat_count() and
compat_copy_strings(), this matches the code in fs/exec.c and certainly
makes sense.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/compat.c             | 28 +++++++++++++++-------------
 fs/exec.c               |  8 ++++----
 include/linux/binfmts.h |  4 ++++
 3 files changed, 23 insertions(+), 17 deletions(-)

diff --git a/fs/compat.c b/fs/compat.c
index c580c322fa6b..eb1740ac8c0a 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1350,6 +1350,10 @@ static int compat_count(compat_uptr_t __user *argv, int max)
 			argv++;
 			if (i++ >= max)
 				return -E2BIG;
+
+			if (fatal_signal_pending(current))
+				return -ERESTARTNOHAND;
+			cond_resched();
 		}
 	}
 	return i;
@@ -1391,6 +1395,12 @@ static int compat_copy_strings(int argc, compat_uptr_t __user *argv,
 		while (len > 0) {
 			int offset, bytes_to_copy;
 
+			if (fatal_signal_pending(current)) {
+				ret = -ERESTARTNOHAND;
+				goto out;
+			}
+			cond_resched();
+
 			offset = pos % PAGE_SIZE;
 			if (offset == 0)
 				offset = PAGE_SIZE;
@@ -1407,18 +1417,8 @@ static int compat_copy_strings(int argc, compat_uptr_t __user *argv,
 			if (!kmapped_page || kpos != (pos & PAGE_MASK)) {
 				struct page *page;
 
-#ifdef CONFIG_STACK_GROWSUP
-				ret = expand_stack_downwards(bprm->vma, pos);
-				if (ret < 0) {
-					/* We've exceed the stack rlimit. */
-					ret = -E2BIG;
-					goto out;
-				}
-#endif
-				ret = get_user_pages(current, bprm->mm, pos,
-						     1, 1, 1, &page, NULL);
-				if (ret <= 0) {
-					/* We've exceed the stack rlimit. */
+				page = get_arg_page(bprm, pos, 1);
+				if (!page) {
 					ret = -E2BIG;
 					goto out;
 				}
@@ -1539,8 +1539,10 @@ int compat_do_execve(char * filename,
 	return retval;
 
 out:
-	if (bprm->mm)
+	if (bprm->mm) {
+		acct_arg_size(bprm, 0);
 		mmput(bprm->mm);
+	}
 
 out_file:
 	if (bprm->file) {
diff --git a/fs/exec.c b/fs/exec.c
index 4303b9035fe7..d68c378a3137 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -164,7 +164,7 @@ out:
 
 #ifdef CONFIG_MMU
 
-static void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
+void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
 {
 	struct mm_struct *mm = current->mm;
 	long diff = (long)(pages - bprm->vma_pages);
@@ -183,7 +183,7 @@ static void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
 #endif
 }
 
-static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
+struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
 		int write)
 {
 	struct page *page;
@@ -297,11 +297,11 @@ static bool valid_arg_len(struct linux_binprm *bprm, long len)
 
 #else
 
-static inline void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
+void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
 {
 }
 
-static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
+struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
 		int write)
 {
 	struct page *page;
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index 7c87796d20da..64a7114a9394 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -60,6 +60,10 @@ struct linux_binprm{
 	unsigned long loader, exec;
 };
 
+extern void acct_arg_size(struct linux_binprm *bprm, unsigned long pages);
+extern struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
+					int write);
+
 #define BINPRM_FLAGS_ENFORCE_NONDUMP_BIT 0
 #define BINPRM_FLAGS_ENFORCE_NONDUMP (1 << BINPRM_FLAGS_ENFORCE_NONDUMP_BIT)
 

From d92e04713c6323e09a0d0fdfa0d7cbcedb175e49 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 15 Nov 2010 09:36:18 +0000
Subject: [PATCH 1032/1066] ARM: remove obsolete smp_cross_call_done()

smp_cross_call_done() was removed long ago (see 78d236c - remove useless
smp_cross_call_done()).  Remove those which have been subsequently
merged.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-tegra/include/mach/smp.h | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm/mach-tegra/include/mach/smp.h b/arch/arm/mach-tegra/include/mach/smp.h
index e4a34a35a544..d3cd265cb058 100644
--- a/arch/arm/mach-tegra/include/mach/smp.h
+++ b/arch/arm/mach-tegra/include/mach/smp.h
@@ -12,11 +12,4 @@ static inline void smp_cross_call(const struct cpumask *mask)
 	gic_raise_softirq(mask, 1);
 }
 
-/*
- * Do nothing on MPcore.
- */
-static inline void smp_cross_call_done(cpumask_t callmap)
-{
-}
-
 #endif

From ad3b6993b9c5482e8a2ec5aed181538c921fdcbd Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 15 Nov 2010 09:42:08 +0000
Subject: [PATCH 1033/1066] ARM: SMP: pass an ipi number to smp_cross_call()

This allows us to use smp_cross_call() to trigger a number of different
software generated interrupts, rather than combining them all on one
SGI.  Recover the SGI number via do_IPI.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/smp.h                |  4 ++--
 arch/arm/kernel/entry-armv.S              |  2 +-
 arch/arm/kernel/smp.c                     | 10 ++--------
 arch/arm/mach-msm/include/mach/smp.h      |  4 ++--
 arch/arm/mach-omap2/omap-smp.c            |  2 +-
 arch/arm/mach-realview/include/mach/smp.h |  4 ++--
 arch/arm/mach-realview/platsmp.c          |  2 +-
 arch/arm/mach-s5pv310/include/mach/smp.h  |  4 ++--
 arch/arm/mach-s5pv310/platsmp.c           |  2 +-
 arch/arm/mach-tegra/include/mach/smp.h    |  4 ++--
 arch/arm/mach-ux500/include/mach/smp.h    |  4 ++--
 arch/arm/mach-ux500/platsmp.c             |  2 +-
 arch/arm/mach-vexpress/include/mach/smp.h |  4 ++--
 arch/arm/mach-vexpress/platsmp.c          |  2 +-
 arch/arm/plat-omap/include/plat/smp.h     |  4 ++--
 15 files changed, 24 insertions(+), 30 deletions(-)

diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 3d05190797cb..da7e7ca53cc1 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -38,7 +38,7 @@ extern void show_ipi_list(struct seq_file *p);
 /*
  * Called from assembly code, this handles an IPI.
  */
-asmlinkage void do_IPI(struct pt_regs *regs);
+asmlinkage void do_IPI(int ipinr, struct pt_regs *regs);
 
 /*
  * Setup the set of possible CPUs (via set_cpu_possible)
@@ -53,7 +53,7 @@ extern void smp_store_cpu_info(unsigned int cpuid);
 /*
  * Raise an IPI cross call on CPUs in callmap.
  */
-extern void smp_cross_call(const struct cpumask *mask);
+extern void smp_cross_call(const struct cpumask *mask, int ipi);
 
 /*
  * Boot a secondary CPU, and assign it the specified idle task.
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index c09e3573c5de..955cf5f539ed 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -48,7 +48,7 @@
 	 */
 	ALT_SMP(test_for_ipi r0, r6, r5, lr)
 	ALT_UP_B(9997f)
-	movne	r0, sp
+	movne	r1, sp
 	adrne	lr, BSYM(1b)
 	bne	do_IPI
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 8c1959590252..7a236db03fb5 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -404,7 +404,7 @@ static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg)
 	/*
 	 * Call the platform specific cross-CPU call function.
 	 */
-	smp_cross_call(mask);
+	smp_cross_call(mask, 1);
 
 	local_irq_restore(flags);
 }
@@ -537,14 +537,8 @@ static void ipi_cpu_stop(unsigned int cpu)
 
 /*
  * Main handler for inter-processor interrupts
- *
- * For ARM, the ipimask now only identifies a single
- * category of IPI (Bit 1 IPIs have been replaced by a
- * different mechanism):
- *
- *  Bit 0 - Inter-processor function call
  */
-asmlinkage void __exception do_IPI(struct pt_regs *regs)
+asmlinkage void __exception do_IPI(int ipinr, struct pt_regs *regs)
 {
 	unsigned int cpu = smp_processor_id();
 	struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
diff --git a/arch/arm/mach-msm/include/mach/smp.h b/arch/arm/mach-msm/include/mach/smp.h
index 3ff7bf5e679e..a95f7b9efe31 100644
--- a/arch/arm/mach-msm/include/mach/smp.h
+++ b/arch/arm/mach-msm/include/mach/smp.h
@@ -31,9 +31,9 @@
 
 #include <asm/hardware/gic.h>
 
-static inline void smp_cross_call(const struct cpumask *mask)
+static inline void smp_cross_call(const struct cpumask *mask, int ipi)
 {
-	gic_raise_softirq(mask, 1);
+	gic_raise_softirq(mask, ipi);
 }
 
 #endif
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 9e9f70e18e3c..56a8bce247c8 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -76,7 +76,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	omap_modify_auxcoreboot0(0x200, 0xfffffdff);
 	flush_cache_all();
 	smp_wmb();
-	smp_cross_call(cpumask_of(cpu));
+	smp_cross_call(cpumask_of(cpu), 1);
 
 	/*
 	 * Now the secondary core is starting up let it run its
diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h
index d3cd265cb058..d1aa70415a4e 100644
--- a/arch/arm/mach-realview/include/mach/smp.h
+++ b/arch/arm/mach-realview/include/mach/smp.h
@@ -7,9 +7,9 @@
 /*
  * We use IRQ1 as the IPI
  */
-static inline void smp_cross_call(const struct cpumask *mask)
+static inline void smp_cross_call(const struct cpumask *mask, int ipi)
 {
-	gic_raise_softirq(mask, 1);
+	gic_raise_softirq(mask, ipi);
 }
 
 #endif
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 009265818d55..af3d9093390b 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -116,7 +116,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * Use smp_cross_call() for this, since there's little
 	 * point duplicating the code here
 	 */
-	smp_cross_call(cpumask_of(cpu));
+	smp_cross_call(cpumask_of(cpu), 1);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
diff --git a/arch/arm/mach-s5pv310/include/mach/smp.h b/arch/arm/mach-s5pv310/include/mach/smp.h
index b7ec252384f4..2897747bcb07 100644
--- a/arch/arm/mach-s5pv310/include/mach/smp.h
+++ b/arch/arm/mach-s5pv310/include/mach/smp.h
@@ -14,9 +14,9 @@ extern void __iomem *gic_cpu_base_addr;
 /*
  * We use IRQ1 as the IPI
  */
-static inline void smp_cross_call(const struct cpumask *mask)
+static inline void smp_cross_call(const struct cpumask *mask, int ipi)
 {
-	gic_raise_softirq(mask, 1);
+	gic_raise_softirq(mask, ipi);
 }
 
 #endif
diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-s5pv310/platsmp.c
index d357c198edee..d474426f37b7 100644
--- a/arch/arm/mach-s5pv310/platsmp.c
+++ b/arch/arm/mach-s5pv310/platsmp.c
@@ -97,7 +97,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * the boot monitor to read the system wide flags register,
 	 * and branch to the address found there.
 	 */
-	smp_cross_call(cpumask_of(cpu));
+	smp_cross_call(cpumask_of(cpu), 1);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
diff --git a/arch/arm/mach-tegra/include/mach/smp.h b/arch/arm/mach-tegra/include/mach/smp.h
index d3cd265cb058..d1aa70415a4e 100644
--- a/arch/arm/mach-tegra/include/mach/smp.h
+++ b/arch/arm/mach-tegra/include/mach/smp.h
@@ -7,9 +7,9 @@
 /*
  * We use IRQ1 as the IPI
  */
-static inline void smp_cross_call(const struct cpumask *mask)
+static inline void smp_cross_call(const struct cpumask *mask, int ipi)
 {
-	gic_raise_softirq(mask, 1);
+	gic_raise_softirq(mask, ipi);
 }
 
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
index 197e8417375e..bd57c50a5b86 100644
--- a/arch/arm/mach-ux500/include/mach/smp.h
+++ b/arch/arm/mach-ux500/include/mach/smp.h
@@ -18,8 +18,8 @@ extern void u8500_secondary_startup(void);
 /*
  * We use IRQ1 as the IPI
  */
-static inline void smp_cross_call(const struct cpumask *mask)
+static inline void smp_cross_call(const struct cpumask *mask, int ipi)
 {
-	gic_raise_softirq(mask, 1);
+	gic_raise_softirq(mask, ipi);
 }
 #endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 9e4c678de785..b8987bd21249 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -78,7 +78,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
 	outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1);
 
-	smp_cross_call(cpumask_of(cpu));
+	smp_cross_call(cpumask_of(cpu), 1);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
diff --git a/arch/arm/mach-vexpress/include/mach/smp.h b/arch/arm/mach-vexpress/include/mach/smp.h
index 5a6da4fd247e..721be0f0311d 100644
--- a/arch/arm/mach-vexpress/include/mach/smp.h
+++ b/arch/arm/mach-vexpress/include/mach/smp.h
@@ -7,8 +7,8 @@
 /*
  * We use IRQ1 as the IPI
  */
-static inline void smp_cross_call(const struct cpumask *mask)
+static inline void smp_cross_call(const struct cpumask *mask, int ipi)
 {
-	gic_raise_softirq(mask, 1);
+	gic_raise_softirq(mask, ipi);
 }
 #endif
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index 670970699ba9..276f916014c1 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -92,7 +92,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * the boot monitor to read the system wide flags register,
 	 * and branch to the address found there.
 	 */
-	smp_cross_call(cpumask_of(cpu));
+	smp_cross_call(cpumask_of(cpu), 1);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h
index ecd6a488c497..e5541e5388be 100644
--- a/arch/arm/plat-omap/include/plat/smp.h
+++ b/arch/arm/plat-omap/include/plat/smp.h
@@ -29,9 +29,9 @@ extern u32 omap_read_auxcoreboot0(void);
 /*
  * We use Soft IRQ1 as the IPI
  */
-static inline void smp_cross_call(const struct cpumask *mask)
+static inline void smp_cross_call(const struct cpumask *mask, int ipi)
 {
-	gic_raise_softirq(mask, 1);
+	gic_raise_softirq(mask, ipi);
 }
 
 #endif

From 24480d980e9063b3ebd0dfdf2f396c305956c356 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 15 Nov 2010 09:54:18 +0000
Subject: [PATCH 1034/1066] ARM: SMP: avoid using bitmasks and locks for IPIs,
 use hardware instead

Avoid using bitmasks and locks in the percpu area for IPIs, and instead
use individual software generated interrupts to identify the reason for
the IPI.  This avoids the problems of having spinlocks in the percpu
area.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/smp.c | 87 +++++++++++++------------------------------
 1 file changed, 26 insertions(+), 61 deletions(-)

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 7a236db03fb5..78d55c681a4f 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -48,20 +48,15 @@ struct secondary_data secondary_data;
 
 /*
  * structures for inter-processor calls
- * - A collection of single bit ipi messages.
  */
 struct ipi_data {
-	spinlock_t lock;
 	unsigned long ipi_count;
-	unsigned long bits;
 };
 
-static DEFINE_PER_CPU(struct ipi_data, ipi_data) = {
-	.lock	= SPIN_LOCK_UNLOCKED,
-};
+static DEFINE_PER_CPU(struct ipi_data, ipi_data);
 
 enum ipi_msg_type {
-	IPI_TIMER,
+	IPI_TIMER = 2,
 	IPI_RESCHEDULE,
 	IPI_CALL_FUNC,
 	IPI_CALL_FUNC_SINGLE,
@@ -389,22 +384,13 @@ void __init smp_prepare_boot_cpu(void)
 static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg)
 {
 	unsigned long flags;
-	unsigned int cpu;
 
 	local_irq_save(flags);
 
-	for_each_cpu(cpu, mask) {
-		struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
-
-		spin_lock(&ipi->lock);
-		ipi->bits |= 1 << msg;
-		spin_unlock(&ipi->lock);
-	}
-
 	/*
 	 * Call the platform specific cross-CPU call function.
 	 */
-	smp_cross_call(mask, 1);
+	smp_cross_call(mask, msg);
 
 	local_irq_restore(flags);
 }
@@ -546,56 +532,35 @@ asmlinkage void __exception do_IPI(int ipinr, struct pt_regs *regs)
 
 	ipi->ipi_count++;
 
-	for (;;) {
-		unsigned long msgs;
+	switch (ipinr) {
+	case IPI_TIMER:
+		ipi_timer();
+		break;
 
-		spin_lock(&ipi->lock);
-		msgs = ipi->bits;
-		ipi->bits = 0;
-		spin_unlock(&ipi->lock);
+	case IPI_RESCHEDULE:
+		/*
+		 * nothing more to do - eveything is
+		 * done on the interrupt return path
+		 */
+		break;
 
-		if (!msgs)
-			break;
+	case IPI_CALL_FUNC:
+		generic_smp_call_function_interrupt();
+		break;
 
-		do {
-			unsigned nextmsg;
+	case IPI_CALL_FUNC_SINGLE:
+		generic_smp_call_function_single_interrupt();
+		break;
 
-			nextmsg = msgs & -msgs;
-			msgs &= ~nextmsg;
-			nextmsg = ffz(~nextmsg);
+	case IPI_CPU_STOP:
+		ipi_cpu_stop(cpu);
+		break;
 
-			switch (nextmsg) {
-			case IPI_TIMER:
-				ipi_timer();
-				break;
-
-			case IPI_RESCHEDULE:
-				/*
-				 * nothing more to do - eveything is
-				 * done on the interrupt return path
-				 */
-				break;
-
-			case IPI_CALL_FUNC:
-				generic_smp_call_function_interrupt();
-				break;
-
-			case IPI_CALL_FUNC_SINGLE:
-				generic_smp_call_function_single_interrupt();
-				break;
-
-			case IPI_CPU_STOP:
-				ipi_cpu_stop(cpu);
-				break;
-
-			default:
-				printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%x\n",
-				       cpu, nextmsg);
-				break;
-			}
-		} while (msgs);
+	default:
+		printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%x\n",
+		       cpu, ipinr);
+		break;
 	}
-
 	set_irq_regs(old_regs);
 }
 

From 0df7095205cbf6ea1cdfe6254e0d6a3b823caa3b Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Thu, 2 Dec 2010 19:16:56 +0000
Subject: [PATCH 1035/1066] ARM: SMP: remove IRQ-disabling for smp_cross_call()

As we've now removed the spinlock and bitmask, we have nothing left
which requires interrupts to be disabled when sending an IPI.  All
current IPI-sending implementations use the GIC, which also does not
require interrupts disabled when calling gic_raise_softirq().

Remove the now unnecessary IRQ disable.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/smp.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 78d55c681a4f..4878e51561f9 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -383,16 +383,10 @@ void __init smp_prepare_boot_cpu(void)
 
 static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg)
 {
-	unsigned long flags;
-
-	local_irq_save(flags);
-
 	/*
 	 * Call the platform specific cross-CPU call function.
 	 */
 	smp_cross_call(mask, msg);
-
-	local_irq_restore(flags);
 }
 
 void arch_send_call_function_ipi_mask(const struct cpumask *mask)

From e3fbb087650df130788d8e3ac29875ee56819249 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 20 Dec 2010 14:47:19 +0000
Subject: [PATCH 1036/1066] ARM: SMP: remove send_ipi_message()

send_ipi_message() does nothing except call smp_cross_call().  As
this is a static function, nothing external to this file calls it,
so we can easily clean up this now unnecessary indirection.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/smp.c | 18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 4878e51561f9..3772cfc6953a 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -381,22 +381,14 @@ void __init smp_prepare_boot_cpu(void)
 	per_cpu(cpu_data, cpu).idle = current;
 }
 
-static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg)
-{
-	/*
-	 * Call the platform specific cross-CPU call function.
-	 */
-	smp_cross_call(mask, msg);
-}
-
 void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
-	send_ipi_message(mask, IPI_CALL_FUNC);
+	smp_cross_call(mask, IPI_CALL_FUNC);
 }
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
+	smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
 }
 
 void show_ipi_list(struct seq_file *p)
@@ -454,7 +446,7 @@ asmlinkage void __exception do_local_timer(struct pt_regs *regs)
 #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
 static void smp_timer_broadcast(const struct cpumask *mask)
 {
-	send_ipi_message(mask, IPI_TIMER);
+	smp_cross_call(mask, IPI_TIMER);
 }
 #else
 #define smp_timer_broadcast	NULL
@@ -560,7 +552,7 @@ asmlinkage void __exception do_IPI(int ipinr, struct pt_regs *regs)
 
 void smp_send_reschedule(int cpu)
 {
-	send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
+	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
 void smp_send_stop(void)
@@ -568,7 +560,7 @@ void smp_send_stop(void)
 	cpumask_t mask = cpu_online_map;
 	cpu_clear(smp_processor_id(), mask);
 	if (!cpus_empty(mask))
-		send_ipi_message(&mask, IPI_CPU_STOP);
+		smp_cross_call(&mask, IPI_CPU_STOP);
 }
 
 /*

From ec405ea9fe5fdeb40824edba7082803b3e98f176 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 15 Nov 2010 13:38:06 +0000
Subject: [PATCH 1037/1066] ARM: include local timer irq stats only when local
 timers configured

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/hardirq.h |  2 ++
 arch/arm/kernel/irq.c          |  2 ++
 arch/arm/kernel/smp.c          | 24 ++++++++++++------------
 3 files changed, 16 insertions(+), 12 deletions(-)

diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 6d7485aff955..522fb23241ac 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -7,7 +7,9 @@
 
 typedef struct {
 	unsigned int __softirq_pending;
+#ifdef CONFIG_LOCAL_TIMERS
 	unsigned int local_timer_irqs;
+#endif
 } ____cacheline_aligned irq_cpustat_t;
 
 #include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 36ad3be4692a..ea29721ba348 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -93,6 +93,8 @@ unlock:
 #endif
 #ifdef CONFIG_SMP
 		show_ipi_list(p);
+#endif
+#ifdef CONFIG_LOCAL_TIMERS
 		show_local_irqs(p);
 #endif
 		seq_printf(p, "Err: %10lu\n", irq_err_count);
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 3772cfc6953a..36d4b9140dcf 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -403,18 +403,6 @@ void show_ipi_list(struct seq_file *p)
 	seq_putc(p, '\n');
 }
 
-void show_local_irqs(struct seq_file *p)
-{
-	unsigned int cpu;
-
-	seq_printf(p, "LOC: ");
-
-	for_each_present_cpu(cpu)
-		seq_printf(p, "%10u ", irq_stat[cpu].local_timer_irqs);
-
-	seq_putc(p, '\n');
-}
-
 /*
  * Timer (local or broadcast) support
  */
@@ -441,6 +429,18 @@ asmlinkage void __exception do_local_timer(struct pt_regs *regs)
 
 	set_irq_regs(old_regs);
 }
+
+void show_local_irqs(struct seq_file *p)
+{
+	unsigned int cpu;
+
+	seq_printf(p, "LOC: ");
+
+	for_each_present_cpu(cpu)
+		seq_printf(p, "%10u ", irq_stat[cpu].local_timer_irqs);
+
+	seq_putc(p, '\n');
+}
 #endif
 
 #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST

From 46c48f222f568decb881a552caa1c8f9c96c521e Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 15 Nov 2010 14:15:03 +0000
Subject: [PATCH 1038/1066] ARM: SMP: provide accessors for irq_stat data

Provide __inc_irq_stat() and __get_irq_stat() to increment and
read the irq stat counters.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/hardirq.h | 3 +++
 arch/arm/kernel/smp.c          | 4 ++--
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 522fb23241ac..923eaa1ba83b 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -14,6 +14,9 @@ typedef struct {
 
 #include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
 
+#define __inc_irq_stat(cpu, member)	__IRQ_STAT(cpu, member)++
+#define __get_irq_stat(cpu, member)	__IRQ_STAT(cpu, member)
+
 #if NR_IRQS > 512
 #define HARDIRQ_BITS	10
 #elif NR_IRQS > 256
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 36d4b9140dcf..24131264ec2c 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -423,7 +423,7 @@ asmlinkage void __exception do_local_timer(struct pt_regs *regs)
 	int cpu = smp_processor_id();
 
 	if (local_timer_ack()) {
-		irq_stat[cpu].local_timer_irqs++;
+		__inc_irq_stat(cpu, local_timer_irqs);
 		ipi_timer();
 	}
 
@@ -437,7 +437,7 @@ void show_local_irqs(struct seq_file *p)
 	seq_printf(p, "LOC: ");
 
 	for_each_present_cpu(cpu)
-		seq_printf(p, "%10u ", irq_stat[cpu].local_timer_irqs);
+		seq_printf(p, "%10u ", __get_irq_stat(cpu, local_timer_irqs));
 
 	seq_putc(p, '\n');
 }

From cab8c6f3053c1b147bba825844c8e208f8b3b9f4 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 15 Nov 2010 14:20:41 +0000
Subject: [PATCH 1039/1066] ARM: SMP: move ipi_count into irq_stat structure

Move the ipi_count into irq_stat, which allows the ipi_data structure
to be entirely removed.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/hardirq.h |  3 +++
 arch/arm/kernel/smp.c          | 14 ++------------
 2 files changed, 5 insertions(+), 12 deletions(-)

diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 923eaa1ba83b..824b08aa3f7a 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -10,6 +10,9 @@ typedef struct {
 #ifdef CONFIG_LOCAL_TIMERS
 	unsigned int local_timer_irqs;
 #endif
+#ifdef CONFIG_SMP
+	unsigned int ipi_irqs;
+#endif
 } ____cacheline_aligned irq_cpustat_t;
 
 #include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 24131264ec2c..65b5ba867805 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -46,15 +46,6 @@
  */
 struct secondary_data secondary_data;
 
-/*
- * structures for inter-processor calls
- */
-struct ipi_data {
-	unsigned long ipi_count;
-};
-
-static DEFINE_PER_CPU(struct ipi_data, ipi_data);
-
 enum ipi_msg_type {
 	IPI_TIMER = 2,
 	IPI_RESCHEDULE,
@@ -398,7 +389,7 @@ void show_ipi_list(struct seq_file *p)
 	seq_puts(p, "IPI:");
 
 	for_each_present_cpu(cpu)
-		seq_printf(p, " %10lu", per_cpu(ipi_data, cpu).ipi_count);
+		seq_printf(p, " %10u", __get_irq_stat(cpu, ipi_irqs));
 
 	seq_putc(p, '\n');
 }
@@ -513,10 +504,9 @@ static void ipi_cpu_stop(unsigned int cpu)
 asmlinkage void __exception do_IPI(int ipinr, struct pt_regs *regs)
 {
 	unsigned int cpu = smp_processor_id();
-	struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
-	ipi->ipi_count++;
+	__inc_irq_stat(cpu, ipi_irqs);
 
 	switch (ipinr) {
 	case IPI_TIMER:

From f13cd4170ee789f63b3c9585c1ae34e028bd549d Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 15 Nov 2010 14:33:51 +0000
Subject: [PATCH 1040/1066] ARM: fix /proc/interrupts formatting

As per x86, align the initial column according to how many IRQs we
have.  Also, provide an english explaination for the 'LOC:' and
'IPI:' lines.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/mach/irq.h |  2 +-
 arch/arm/include/asm/smp.h      |  4 ++--
 arch/arm/kernel/fiq.c           |  5 +++--
 arch/arm/kernel/irq.c           | 16 ++++++++++------
 arch/arm/kernel/smp.c           | 14 +++++++-------
 5 files changed, 23 insertions(+), 18 deletions(-)

diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
index ce3eee9fe26c..2bc47fb94d51 100644
--- a/arch/arm/include/asm/mach/irq.h
+++ b/arch/arm/include/asm/mach/irq.h
@@ -20,7 +20,7 @@ struct seq_file;
 extern unsigned int arch_nr_irqs;
 extern void (*init_arch_irq)(void);
 extern void init_FIQ(void);
-extern int show_fiq_list(struct seq_file *, void *);
+extern int show_fiq_list(struct seq_file *, int);
 
 /*
  * This is for easy migration, but should be changed in the source
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index da7e7ca53cc1..f93d0a637016 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -33,7 +33,7 @@ struct seq_file;
 /*
  * generate IPI list text
  */
-extern void show_ipi_list(struct seq_file *p);
+extern void show_ipi_list(struct seq_file *, int);
 
 /*
  * Called from assembly code, this handles an IPI.
@@ -97,6 +97,6 @@ extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 /*
  * show local interrupt info
  */
-extern void show_local_irqs(struct seq_file *);
+extern void show_local_irqs(struct seq_file *, int);
 
 #endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index 6ff7919613d7..47837b85c07c 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -67,10 +67,11 @@ static struct fiq_handler default_owner = {
 
 static struct fiq_handler *current_fiq = &default_owner;
 
-int show_fiq_list(struct seq_file *p, void *v)
+int show_fiq_list(struct seq_file *p, int prec)
 {
 	if (current_fiq != &default_owner)
-		seq_printf(p, "FIQ:              %s\n", current_fiq->name);
+		seq_printf(p, "%*s:              %s\n", prec, "FIQ",
+			current_fiq->name);
 
 	return 0;
 }
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index ea29721ba348..4e7a7d272212 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -57,11 +57,15 @@ int show_interrupts(struct seq_file *p, void *v)
 	struct irq_desc *desc;
 	struct irqaction * action;
 	unsigned long flags;
+	int prec, n;
+
+	for (prec = 3, n = 1000; prec < 10 && n <= nr_irqs; prec++)
+		n *= 10;
 
 	if (i == 0) {
 		char cpuname[12];
 
-		seq_printf(p, "    ");
+		seq_printf(p, "%*s ", prec, "");
 		for_each_present_cpu(cpu) {
 			sprintf(cpuname, "CPU%d", cpu);
 			seq_printf(p, " %10s", cpuname);
@@ -76,7 +80,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		if (!action)
 			goto unlock;
 
-		seq_printf(p, "%3d: ", i);
+		seq_printf(p, "%*d: ", prec, i);
 		for_each_present_cpu(cpu)
 			seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu));
 		seq_printf(p, " %10s", desc->chip->name ? : "-");
@@ -89,15 +93,15 @@ unlock:
 		raw_spin_unlock_irqrestore(&desc->lock, flags);
 	} else if (i == nr_irqs) {
 #ifdef CONFIG_FIQ
-		show_fiq_list(p, v);
+		show_fiq_list(p, prec);
 #endif
 #ifdef CONFIG_SMP
-		show_ipi_list(p);
+		show_ipi_list(p, prec);
 #endif
 #ifdef CONFIG_LOCAL_TIMERS
-		show_local_irqs(p);
+		show_local_irqs(p, prec);
 #endif
-		seq_printf(p, "Err: %10lu\n", irq_err_count);
+		seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
 	}
 	return 0;
 }
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 65b5ba867805..269237ed76a0 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -382,16 +382,16 @@ void arch_send_call_function_single_ipi(int cpu)
 	smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
 }
 
-void show_ipi_list(struct seq_file *p)
+void show_ipi_list(struct seq_file *p, int prec)
 {
 	unsigned int cpu;
 
-	seq_puts(p, "IPI:");
+	seq_printf(p, "%*s: ", prec, "IPI");
 
 	for_each_present_cpu(cpu)
-		seq_printf(p, " %10u", __get_irq_stat(cpu, ipi_irqs));
+		seq_printf(p, "%10u ", __get_irq_stat(cpu, ipi_irqs));
 
-	seq_putc(p, '\n');
+	seq_printf(p, " Inter-processor interrupts\n");
 }
 
 /*
@@ -421,16 +421,16 @@ asmlinkage void __exception do_local_timer(struct pt_regs *regs)
 	set_irq_regs(old_regs);
 }
 
-void show_local_irqs(struct seq_file *p)
+void show_local_irqs(struct seq_file *p, int prec)
 {
 	unsigned int cpu;
 
-	seq_printf(p, "LOC: ");
+	seq_printf(p, "%*s: ", prec, "LOC");
 
 	for_each_present_cpu(cpu)
 		seq_printf(p, "%10u ", __get_irq_stat(cpu, local_timer_irqs));
 
-	seq_putc(p, '\n');
+	seq_printf(p, " Local timer interrupts\n");
 }
 #endif
 

From 4a88abd7b48e8ec8084b1252d0f5ebdab43c2508 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 15 Nov 2010 14:40:29 +0000
Subject: [PATCH 1041/1066] ARM: SMP: provide individual IPI interrupt
 statistics

This separates out the individual IPI interrupt counts from the
total IPI count, which allows better visibility of what IPIs are
being used for.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/hardirq.h |  4 +++-
 arch/arm/kernel/irq.c          |  5 +++++
 arch/arm/kernel/smp.c          | 25 +++++++++++++++++++------
 3 files changed, 27 insertions(+), 7 deletions(-)

diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 824b08aa3f7a..c52e2507c9e0 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -5,13 +5,15 @@
 #include <linux/threads.h>
 #include <asm/irq.h>
 
+#define NR_IPI	5
+
 typedef struct {
 	unsigned int __softirq_pending;
 #ifdef CONFIG_LOCAL_TIMERS
 	unsigned int local_timer_irqs;
 #endif
 #ifdef CONFIG_SMP
-	unsigned int ipi_irqs;
+	unsigned int ipi_irqs[NR_IPI];
 #endif
 } ____cacheline_aligned irq_cpustat_t;
 
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 4e7a7d272212..6276f01df9e4 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -62,6 +62,11 @@ int show_interrupts(struct seq_file *p, void *v)
 	for (prec = 3, n = 1000; prec < 10 && n <= nr_irqs; prec++)
 		n *= 10;
 
+#ifdef CONFIG_SMP
+	if (prec < 4)
+		prec = 4;
+#endif
+
 	if (i == 0) {
 		char cpuname[12];
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 269237ed76a0..fa0c5f6e1587 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -382,16 +382,28 @@ void arch_send_call_function_single_ipi(int cpu)
 	smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
 }
 
+static const char *ipi_types[NR_IPI] = {
+#define S(x,s)	[x - IPI_TIMER] = s
+	S(IPI_TIMER, "Timer broadcast interrupts"),
+	S(IPI_RESCHEDULE, "Rescheduling interrupts"),
+	S(IPI_CALL_FUNC, "Function call interrupts"),
+	S(IPI_CALL_FUNC_SINGLE, "Single function call interrupts"),
+	S(IPI_CPU_STOP, "CPU stop interrupts"),
+};
+
 void show_ipi_list(struct seq_file *p, int prec)
 {
-	unsigned int cpu;
+	unsigned int cpu, i;
 
-	seq_printf(p, "%*s: ", prec, "IPI");
+	for (i = 0; i < NR_IPI; i++) {
+		seq_printf(p, "%*s%u: ", prec - 1, "IPI", i);
 
-	for_each_present_cpu(cpu)
-		seq_printf(p, "%10u ", __get_irq_stat(cpu, ipi_irqs));
+		for_each_present_cpu(cpu)
+			seq_printf(p, "%10u ",
+				   __get_irq_stat(cpu, ipi_irqs[i]));
 
-	seq_printf(p, " Inter-processor interrupts\n");
+		seq_printf(p, " %s\n", ipi_types[i]);
+	}
 }
 
 /*
@@ -506,7 +518,8 @@ asmlinkage void __exception do_IPI(int ipinr, struct pt_regs *regs)
 	unsigned int cpu = smp_processor_id();
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
-	__inc_irq_stat(cpu, ipi_irqs);
+	if (ipinr >= IPI_TIMER && ipinr < IPI_TIMER + NR_IPI)
+		__inc_irq_stat(cpu, ipi_irqs[ipinr - IPI_TIMER]);
 
 	switch (ipinr) {
 	case IPI_TIMER:

From b54992fe1b4bad7b7488d58b8696e4e8974fdab0 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 15 Nov 2010 14:46:46 +0000
Subject: [PATCH 1042/1066] ARM: SMP: collect IPI and local timer IRQs for
 /proc/stat

The IPI and local timer interrupts weren't being properly accounted
for in /proc/stat.  Collect them from the irq_stat structure, and
return their sum.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/hardirq.h |  8 ++++++++
 arch/arm/kernel/smp.c          | 15 +++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index c52e2507c9e0..89ad1805e579 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -22,6 +22,14 @@ typedef struct {
 #define __inc_irq_stat(cpu, member)	__IRQ_STAT(cpu, member)++
 #define __get_irq_stat(cpu, member)	__IRQ_STAT(cpu, member)
 
+#ifdef CONFIG_SMP
+u64 smp_irq_stat_cpu(unsigned int cpu);
+#else
+#define smp_irq_stat_cpu(cpu)	0
+#endif
+
+#define arch_irq_stat_cpu	smp_irq_stat_cpu
+
 #if NR_IRQS > 512
 #define HARDIRQ_BITS	10
 #elif NR_IRQS > 256
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index fa0c5f6e1587..1de3e13a42a1 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -406,6 +406,21 @@ void show_ipi_list(struct seq_file *p, int prec)
 	}
 }
 
+u64 smp_irq_stat_cpu(unsigned int cpu)
+{
+	u64 sum = 0;
+	int i;
+
+	for (i = 0; i < NR_IPI; i++)
+		sum += __get_irq_stat(cpu, ipi_irqs[i]);
+
+#ifdef CONFIG_LOCAL_TIMERS
+	sum += __get_irq_stat(cpu, local_timer_irqs);
+#endif
+
+	return sum;
+}
+
 /*
  * Timer (local or broadcast) support
  */

From 0eb0511d176534674600a1986c3c766756288908 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 22 Nov 2010 12:06:28 +0000
Subject: [PATCH 1043/1066] ARM: SMP: use more sane register allocation for
 __fixup_smp_on_up

Use r0,r3-r6 rather than r0,r3,r4,r6,r7, which makes it easier to
understand which registers can be modified.  Also document which
registers hold values which must be preserved.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/head.S | 39 ++++++++++++++++++++++-----------------
 1 file changed, 22 insertions(+), 17 deletions(-)

diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index dd6b369ac69c..fd94e4e82fc9 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -89,6 +89,11 @@ ENTRY(stext)
 	bl	__lookup_machine_type		@ r5=machinfo
 	movs	r8, r5				@ invalid machine (r5=0)?
 	beq	__error_a			@ yes, error 'a'
+
+	/*
+	 * r1 = machine no, r2 = atags,
+	 * r8 = machinfo, r9 = cpuid, r10 = procinfo
+	 */
 	bl	__vet_atags
 #ifdef CONFIG_SMP_ON_UP
 	bl	__fixup_smp
@@ -381,19 +386,19 @@ ENDPROC(__turn_mmu_on)
 
 #ifdef CONFIG_SMP_ON_UP
 __fixup_smp:
-	mov	r7, #0x00070000
-	orr	r6, r7, #0xff000000	@ mask 0xff070000
-	orr	r7, r7, #0x41000000	@ val 0x41070000
-	and	r0, r9, r6
-	teq	r0, r7			@ ARM CPU and ARMv6/v7?
+	mov	r4, #0x00070000
+	orr	r3, r4, #0xff000000	@ mask 0xff070000
+	orr	r4, r4, #0x41000000	@ val 0x41070000
+	and	r0, r9, r3
+	teq	r0, r4			@ ARM CPU and ARMv6/v7?
 	bne	__fixup_smp_on_up	@ no, assume UP
 
-	orr	r6, r6, #0x0000ff00
-	orr	r6, r6, #0x000000f0	@ mask 0xff07fff0
-	orr	r7, r7, #0x0000b000
-	orr	r7, r7, #0x00000020	@ val 0x4107b020
-	and	r0, r9, r6
-	teq	r0, r7			@ ARM 11MPCore?
+	orr	r3, r3, #0x0000ff00
+	orr	r3, r3, #0x000000f0	@ mask 0xff07fff0
+	orr	r4, r4, #0x0000b000
+	orr	r4, r4, #0x00000020	@ val 0x4107b020
+	and	r0, r9, r3
+	teq	r0, r4			@ ARM 11MPCore?
 	moveq	pc, lr			@ yes, assume SMP
 
 	mrc	p15, 0, r0, c0, c0, 5	@ read MPIDR
@@ -402,13 +407,13 @@ __fixup_smp:
 
 __fixup_smp_on_up:
 	adr	r0, 1f
-	ldmia	r0, {r3, r6, r7}
+	ldmia	r0, {r3 - r5}
 	sub	r3, r0, r3
-	add	r6, r6, r3
-	add	r7, r7, r3
-2:	cmp	r6, r7
-	ldmia	r6!, {r0, r4}
-	strlo	r4, [r0, r3]
+	add	r4, r4, r3
+	add	r5, r5, r3
+2:	cmp	r4, r5
+	ldmia	r4!, {r0, r6}
+	strlo	r6, [r0, r3]
 	blo	2b
 	mov	pc, lr
 ENDPROC(__fixup_smp)

From 28e18293cf0f8d23a0950d7b1d2212d11af494dc Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Thu, 2 Dec 2010 09:53:54 +0000
Subject: [PATCH 1044/1066] ARM: SMP: ensure smp_send_stop() waits for CPUs to
 stop

Wait for CPUs to indicate that they've stopped, after sending the
stop IPI, rather than blindly continuing on and hoping that they've
stopped in time.  Print a warning if we fail to stop the other CPUs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/smp.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 1de3e13a42a1..64f2d198c764 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -575,10 +575,22 @@ void smp_send_reschedule(int cpu)
 
 void smp_send_stop(void)
 {
-	cpumask_t mask = cpu_online_map;
-	cpu_clear(smp_processor_id(), mask);
-	if (!cpus_empty(mask))
+	unsigned long timeout;
+
+	if (num_online_cpus() > 1) {
+		cpumask_t mask = cpu_online_map;
+		cpu_clear(smp_processor_id(), mask);
+
 		smp_cross_call(&mask, IPI_CPU_STOP);
+	}
+
+	/* Wait up to one second for other CPUs to stop */
+	timeout = USEC_PER_SEC;
+	while (num_online_cpus() > 1 && timeout--)
+		udelay(1);
+
+	if (num_online_cpus() > 1)
+		pr_warning("SMP: failed to stop secondary CPUs\n");
 }
 
 /*

From bbc3d14e9aca023bb98e580aa1c9350af8effdb1 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Fri, 3 Dec 2010 10:42:58 +0000
Subject: [PATCH 1045/1066] ARM: SMP: move CPU number sanity checks to
 smp_init_cpus()

Ensure that the number of CPUs is sanity checked before setting
the number of possible CPUs.  This avoids any chance of overflowing
the cpu_possible bitmap.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/omap-smp.c   | 21 +++++++++++----------
 arch/arm/mach-realview/platsmp.c | 20 ++++++++++----------
 arch/arm/mach-ux500/platsmp.c    | 26 +++++++++++++-------------
 3 files changed, 34 insertions(+), 33 deletions(-)

diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 56a8bce247c8..3c87468ce9cb 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -120,16 +120,6 @@ void __init smp_init_cpus(void)
 
 	ncores = get_core_count();
 
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-	unsigned int ncores = get_core_count();
-	unsigned int cpu = smp_processor_id();
-	int i;
-
 	/* sanity check */
 	if (ncores == 0) {
 		printk(KERN_ERR
@@ -144,6 +134,17 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		       ncores, NR_CPUS);
 		ncores = NR_CPUS;
 	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = num_possible_cpus();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
 	smp_store_cpu_info(cpu);
 
 	/*
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index af3d9093390b..108e92f9746b 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -160,16 +160,6 @@ void __init smp_init_cpus(void)
 {
 	unsigned int i, ncores = get_core_count();
 
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-	unsigned int ncores = get_core_count();
-	unsigned int cpu = smp_processor_id();
-	int i;
-
 	/* sanity check */
 	if (ncores == 0) {
 		printk(KERN_ERR
@@ -186,6 +176,16 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		ncores = NR_CPUS;
 	}
 
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = num_possible_cpus();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
 	smp_store_cpu_info(cpu);
 
 	/*
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index b8987bd21249..a51962b7579b 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -128,16 +128,6 @@ void __init smp_init_cpus(void)
 {
 	unsigned int i, ncores = get_core_count();
 
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-	unsigned int ncores = get_core_count();
-	unsigned int cpu = smp_processor_id();
-	int i;
-
 	/* sanity check */
 	if (ncores == 0) {
 		printk(KERN_ERR
@@ -145,14 +135,24 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		ncores = 1;
 	}
 
-	if (ncores > num_possible_cpus())	{
+	if (ncores > NR_CPUS) {
 		printk(KERN_WARNING
 		       "U8500: no. of cores (%d) greater than configured "
 		       "maximum of %d - clipping\n",
-		       ncores, num_possible_cpus());
-		ncores = num_possible_cpus();
+		       ncores, NR_CPUS);
+		ncores = NR_CPUS;
 	}
 
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = num_possible_cpus();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
 	smp_store_cpu_info(cpu);
 
 	/*

From 8975b6c0fdd57e061f4d1040163778ceaf340ad8 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Fri, 3 Dec 2010 19:29:53 +0000
Subject: [PATCH 1046/1066] ARM: SMP: Clean up ncores sanity checks

scu_get_core_count() never returns zero cores, so we don't need to
check and correct if ncores is zero.

Tegra was missing the check against NR_CPUS, leading to a potential
bitfield overflow if this becomes the case.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/omap-smp.c   | 6 ------
 arch/arm/mach-realview/platsmp.c | 7 -------
 arch/arm/mach-s5pv310/platsmp.c  | 7 -------
 arch/arm/mach-tegra/platsmp.c    | 6 ++++++
 arch/arm/mach-ux500/platsmp.c    | 6 ------
 arch/arm/mach-vexpress/platsmp.c | 7 -------
 6 files changed, 6 insertions(+), 33 deletions(-)

diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 3c87468ce9cb..5f10f38354ae 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -121,12 +121,6 @@ void __init smp_init_cpus(void)
 	ncores = get_core_count();
 
 	/* sanity check */
-	if (ncores == 0) {
-		printk(KERN_ERR
-		       "OMAP4: strange core count of 0? Default to 1\n");
-		ncores = 1;
-	}
-
 	if (ncores > NR_CPUS) {
 		printk(KERN_WARNING
 		       "OMAP4: no. of cores (%d) greater than configured "
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 108e92f9746b..13116cd37639 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -161,13 +161,6 @@ void __init smp_init_cpus(void)
 	unsigned int i, ncores = get_core_count();
 
 	/* sanity check */
-	if (ncores == 0) {
-		printk(KERN_ERR
-		       "Realview: strange CM count of 0? Default to 1\n");
-
-		ncores = 1;
-	}
-
 	if (ncores > NR_CPUS) {
 		printk(KERN_WARNING
 		       "Realview: no. of cores (%d) greater than configured "
diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-s5pv310/platsmp.c
index d474426f37b7..560ada83b0b1 100644
--- a/arch/arm/mach-s5pv310/platsmp.c
+++ b/arch/arm/mach-s5pv310/platsmp.c
@@ -130,13 +130,6 @@ void __init smp_init_cpus(void)
 	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
 
 	/* sanity check */
-	if (ncores == 0) {
-		printk(KERN_ERR
-		       "S5PV310: strange CM count of 0? Default to 1\n");
-
-		ncores = 1;
-	}
-
 	if (ncores > NR_CPUS) {
 		printk(KERN_WARNING
 		       "S5PV310: no. of cores (%d) greater than configured "
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 1c0fd92cab39..5b194dd815a8 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -117,6 +117,12 @@ void __init smp_init_cpus(void)
 {
 	unsigned int i, ncores = scu_get_core_count(scu_base);
 
+	if (ncores > NR_CPUS) {
+		printk(KERN_ERR "Tegra: no. of cores (%u) greater than configured (%u), clipping\n",
+			ncores, NR_CPUS);
+		ncores = NR_CPUS;
+	}
+
 	for (i = 0; i < ncores; i++)
 		cpu_set(i, cpu_possible_map);
 }
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index a51962b7579b..e31024e3a7cc 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -129,12 +129,6 @@ void __init smp_init_cpus(void)
 	unsigned int i, ncores = get_core_count();
 
 	/* sanity check */
-	if (ncores == 0) {
-		printk(KERN_ERR
-		       "U8500: strange CM count of 0? Default to 1\n");
-		ncores = 1;
-	}
-
 	if (ncores > NR_CPUS) {
 		printk(KERN_WARNING
 		       "U8500: no. of cores (%d) greater than configured "
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index 276f916014c1..b5a758683668 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -124,13 +124,6 @@ void __init smp_init_cpus(void)
 	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
 
 	/* sanity check */
-	if (ncores == 0) {
-		printk(KERN_ERR
-		       "vexpress: strange CM count of 0? Default to 1\n");
-
-		ncores = 1;
-	}
-
 	if (ncores > NR_CPUS) {
 		printk(KERN_WARNING
 		       "vexpress: no. of cores (%d) greater than configured "

From fd778f0ad7dda1108281410ddca0d07936256d3c Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Thu, 2 Dec 2010 18:09:37 +0000
Subject: [PATCH 1047/1066] ARM: SMP: get rid of get_core_count()

We don't need this small function as well as scu_get_core_count()

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/omap-smp.c   | 12 +-----------
 arch/arm/mach-realview/platsmp.c | 13 ++++---------
 arch/arm/mach-ux500/platsmp.c    |  9 +++------
 3 files changed, 8 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 5f10f38354ae..405a8fc53308 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -29,16 +29,6 @@
 /* SCU base address */
 static void __iomem *scu_base;
 
-/*
- * Use SCU config register to count number of cores
- */
-static inline unsigned int get_core_count(void)
-{
-	if (scu_base)
-		return scu_get_core_count(scu_base);
-	return 1;
-}
-
 static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
@@ -118,7 +108,7 @@ void __init smp_init_cpus(void)
 	scu_base = ioremap(OMAP44XX_SCU_BASE, SZ_256);
 	BUG_ON(!scu_base);
 
-	ncores = get_core_count();
+	ncores = scu_get_core_count(scu_base);
 
 	/* sanity check */
 	if (ncores > NR_CPUS) {
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 13116cd37639..6595e875fb2f 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -50,14 +50,6 @@ static void __iomem *scu_base_addr(void)
 		return (void __iomem *)0;
 }
 
-static inline unsigned int get_core_count(void)
-{
-	void __iomem *scu_base = scu_base_addr();
-	if (scu_base)
-		return scu_get_core_count(scu_base);
-	return 1;
-}
-
 static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
@@ -158,7 +150,10 @@ static void __init poke_milo(void)
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i, ncores = get_core_count();
+	void __iomem *scu_base = scu_base_addr();
+	unsigned int i, ncores;
+
+	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
 
 	/* sanity check */
 	if (ncores > NR_CPUS) {
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index e31024e3a7cc..fd40fa175913 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -28,11 +28,6 @@
  */
 volatile int __cpuinitdata pen_release = -1;
 
-static unsigned int __init get_core_count(void)
-{
-	return scu_get_core_count(__io_address(UX500_SCU_BASE));
-}
-
 static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
@@ -126,7 +121,9 @@ static void __init wakeup_secondary(void)
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i, ncores = get_core_count();
+	unsigned int i, ncores;
+
+	ncores = scu_get_core_count(__io_address(UX500_SCU_BASE));
 
 	/* sanity check */
 	if (ncores > NR_CPUS) {

From aec66ba1f75c2030cf66f5a21d1c81aa83aa5d95 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Thu, 2 Dec 2010 19:10:01 +0000
Subject: [PATCH 1048/1066] ARM: SMP: get rid of references to poke_milo and
 Milo

Milo is an old boot loader, which is no longer relevant for these
platforms.  References to it are misleading.  Move the code out
of poke_milo(), and remove references to milo in comments.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/platsmp.c | 44 +++++++++-----------------------
 arch/arm/mach-tegra/platsmp.c    |  7 -----
 2 files changed, 12 insertions(+), 39 deletions(-)

diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 6595e875fb2f..ef3cc86f5140 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -99,14 +99,9 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	flush_cache_all();
 
 	/*
-	 * XXX
-	 *
-	 * This is a later addition to the booting protocol: the
-	 * bootMonitor now puts secondary cores into WFI, so
-	 * poke_milo() no longer gets the cores moving; we need
-	 * to send a soft interrupt to wake the secondary core.
-	 * Use smp_cross_call() for this, since there's little
-	 * point duplicating the code here
+	 * Send the secondary CPU a soft interrupt, thereby causing
+	 * the boot monitor to read the system wide flags register,
+	 * and branch to the address found there.
 	 */
 	smp_cross_call(cpumask_of(cpu), 1);
 
@@ -128,22 +123,6 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return pen_release != -1 ? -ENOSYS : 0;
 }
 
-static void __init poke_milo(void)
-{
-	/* nobody is to be released from the pen yet */
-	pen_release = -1;
-
-	/*
-	 * Write the address of secondary startup into the system-wide flags
-	 * register. The BootMonitor waits for this register to become
-	 * non-zero.
-	 */
-	__raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
-		     __io_address(REALVIEW_SYS_FLAGSSET));
-
-	mb();
-}
-
 /*
  * Initialise the CPU possible map early - this describes the CPUs
  * which may be present or become present in the system.
@@ -189,13 +168,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
 
-	/*
-	 * Initialise the SCU if there are more than one CPU and let
-	 * them know where to start. Note that, on modern versions of
-	 * MILO, the "poke" doesn't actually do anything until each
-	 * individual core is sent a soft interrupt to get it out of
-	 * WFI
-	 */
 	if (max_cpus > 1) {
 		/*
 		 * Enable the local timer or broadcast device for the
@@ -204,6 +176,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		percpu_timer_setup();
 
 		scu_enable(scu_base_addr());
-		poke_milo();
+
+		/*
+		 * Write the address of secondary startup into the
+		 * system-wide flags register. The BootMonitor waits
+		 * until it receives a soft interrupt, and then the
+		 * secondary CPU branches to this address.
+		 */
+		__raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
+			     __io_address(REALVIEW_SYS_FLAGSSET));
 	}
 }
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 5b194dd815a8..66d0634e7a96 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -148,13 +148,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
 
-	/*
-	 * Initialise the SCU if there are more than one CPU and let
-	 * them know where to start. Note that, on modern versions of
-	 * MILO, the "poke" doesn't actually do anything until each
-	 * individual core is sent a soft interrupt to get it out of
-	 * WFI
-	 */
 	if (max_cpus > 1) {
 		percpu_timer_setup();
 		scu_enable(scu_base);

From 05c74a6cbcfb416286a947668ba32f63d99fe74a Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Fri, 3 Dec 2010 11:09:48 +0000
Subject: [PATCH 1049/1066] ARM: SMP: consolidate the common parts of
 smp_prepare_cpus()

There is a certain amount of smp_prepare_cpus() which doesn't belong
in the platform support code - that is, code which is invariant to the
SMP implementation.  Move this code into arch/arm/kernel/smp.c, and
add a platform_ prefix to the original function.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/smp.h       |  9 +++---
 arch/arm/kernel/smp.c            | 49 +++++++++++++++++++++++++-------
 arch/arm/mach-omap2/omap-smp.c   | 33 +++++----------------
 arch/arm/mach-realview/platsmp.c | 39 +++++++------------------
 arch/arm/mach-s5pv310/platsmp.c  | 35 +++++------------------
 arch/arm/mach-tegra/platsmp.c    | 18 ++----------
 arch/arm/mach-ux500/platsmp.c    | 24 ++--------------
 arch/arm/mach-vexpress/platsmp.c | 43 +++++++---------------------
 8 files changed, 82 insertions(+), 168 deletions(-)

diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index f93d0a637016..96ed521f2408 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -45,10 +45,6 @@ asmlinkage void do_IPI(int ipinr, struct pt_regs *regs);
  */
 extern void smp_init_cpus(void);
 
-/*
- * Move global data into per-processor storage.
- */
-extern void smp_store_cpu_info(unsigned int cpuid);
 
 /*
  * Raise an IPI cross call on CPUs in callmap.
@@ -72,6 +68,11 @@ asmlinkage void secondary_start_kernel(void);
  */
 extern void platform_secondary_init(unsigned int cpu);
 
+/*
+ * Initialize cpu_possible map, and enable coherency
+ */
+extern void platform_smp_prepare_cpus(unsigned int);
+
 /*
  * Initial data for bringing up a secondary CPU.
  */
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 64f2d198c764..c66f2d3f65d3 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -281,6 +281,17 @@ void __ref cpu_die(void)
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
+/*
+ * Called by both boot and secondaries to move global data into
+ * per-processor storage.
+ */
+static void __cpuinit smp_store_cpu_info(unsigned int cpuid)
+{
+	struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
+
+	cpu_info->loops_per_jiffy = loops_per_jiffy;
+}
+
 /*
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
@@ -339,17 +350,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	cpu_idle();
 }
 
-/*
- * Called by both boot and secondaries to move global data into
- * per-processor storage.
- */
-void __cpuinit smp_store_cpu_info(unsigned int cpuid)
-{
-	struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
-
-	cpu_info->loops_per_jiffy = loops_per_jiffy;
-}
-
 void __init smp_cpus_done(unsigned int max_cpus)
 {
 	int cpu;
@@ -372,6 +372,33 @@ void __init smp_prepare_boot_cpu(void)
 	per_cpu(cpu_data, cpu).idle = current;
 }
 
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = num_possible_cpus();
+
+	smp_store_cpu_info(smp_processor_id());
+
+	/*
+	 * are we trying to boot more cores than exist?
+	 */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	if (max_cpus > 1) {
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+
+		/*
+		 * Initialise the SCU if there are more than one CPU
+		 * and let them know where to start.
+		 */
+		platform_smp_prepare_cpus(max_cpus);
+	}
+}
+
 void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
 	smp_cross_call(mask, IPI_CALL_FUNC);
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 405a8fc53308..3c3d6796c97c 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -21,7 +21,6 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
-#include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
 #include <mach/omap4-common.h>
@@ -123,20 +122,10 @@ void __init smp_init_cpus(void)
 		set_cpu_possible(i, true);
 }
 
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	unsigned int ncores = num_possible_cpus();
-	unsigned int cpu = smp_processor_id();
 	int i;
 
-	smp_store_cpu_info(cpu);
-
-	/*
-	 * are we trying to boot more cores than exist?
-	 */
-	if (max_cpus > ncores)
-		max_cpus = ncores;
-
 	/*
 	 * Initialise the present map, which describes the set of CPUs
 	 * actually populated at the present time.
@@ -144,18 +133,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
 
-	if (max_cpus > 1) {
-		/*
-		 * Enable the local timer or broadcast device for the
-		 * boot CPU, but only if we have more than one CPU.
-		 */
-		percpu_timer_setup();
-
-		/*
-		 * Initialise the SCU and wake up the secondary core using
-		 * wakeup_secondary().
-		 */
-		scu_enable(scu_base);
-		wakeup_secondary();
-	}
+	/*
+	 * Initialise the SCU and wake up the secondary core using
+	 * wakeup_secondary().
+	 */
+	scu_enable(scu_base);
+	wakeup_secondary();
 }
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index ef3cc86f5140..380562cd6580 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -19,7 +19,6 @@
 #include <asm/cacheflush.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/localtimer.h>
 #include <asm/unified.h>
 
 #include <mach/board-eb.h>
@@ -147,20 +146,10 @@ void __init smp_init_cpus(void)
 		set_cpu_possible(i, true);
 }
 
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	unsigned int ncores = num_possible_cpus();
-	unsigned int cpu = smp_processor_id();
 	int i;
 
-	smp_store_cpu_info(cpu);
-
-	/*
-	 * are we trying to boot more cores than exist?
-	 */
-	if (max_cpus > ncores)
-		max_cpus = ncores;
-
 	/*
 	 * Initialise the present map, which describes the set of CPUs
 	 * actually populated at the present time.
@@ -168,22 +157,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
 
-	if (max_cpus > 1) {
-		/*
-		 * Enable the local timer or broadcast device for the
-		 * boot CPU, but only if we have more than one CPU.
-		 */
-		percpu_timer_setup();
+	scu_enable(scu_base_addr());
 
-		scu_enable(scu_base_addr());
-
-		/*
-		 * Write the address of secondary startup into the
-		 * system-wide flags register. The BootMonitor waits
-		 * until it receives a soft interrupt, and then the
-		 * secondary CPU branches to this address.
-		 */
-		__raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
-			     __io_address(REALVIEW_SYS_FLAGSSET));
-	}
+	/*
+	 * Write the address of secondary startup into the
+	 * system-wide flags register. The BootMonitor waits
+	 * until it receives a soft interrupt, and then the
+	 * secondary CPU branches to this address.
+	 */
+	__raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
+		     __io_address(REALVIEW_SYS_FLAGSSET));
 }
diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-s5pv310/platsmp.c
index 560ada83b0b1..51c44d4c9890 100644
--- a/arch/arm/mach-s5pv310/platsmp.c
+++ b/arch/arm/mach-s5pv310/platsmp.c
@@ -22,7 +22,6 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
-#include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 #include <asm/unified.h>
 
@@ -142,18 +141,10 @@ void __init smp_init_cpus(void)
 		set_cpu_possible(i, true);
 }
 
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	unsigned int ncores = num_possible_cpus();
-	unsigned int cpu = smp_processor_id();
 	int i;
 
-	smp_store_cpu_info(cpu);
-
-	/* are we trying to boot more cores than exist? */
-	if (max_cpus > ncores)
-		max_cpus = ncores;
-
 	/*
 	 * Initialise the present map, which describes the set of CPUs
 	 * actually populated at the present time.
@@ -161,25 +152,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
 
+	scu_enable(scu_base_addr());
+
 	/*
-	 * Initialise the SCU if there are more than one CPU and let
-	 * them know where to start.
+	 * Write the address of secondary startup into the
+	 * system-wide flags register. The boot monitor waits
+	 * until it receives a soft interrupt, and then the
+	 * secondary CPU branches to this address.
 	 */
-	if (max_cpus > 1) {
-		/*
-		 * Enable the local timer or broadcast device for the
-		 * boot CPU, but only if we have more than one CPU.
-		 */
-		percpu_timer_setup();
-
-		scu_enable(scu_base_addr());
-
-		/*
-		 * Write the address of secondary startup into the
-		 * system-wide flags register. The boot monitor waits
-		 * until it receives a soft interrupt, and then the
-		 * secondary CPU branches to this address.
-		 */
 	__raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_VA_SYSRAM);
-	}
 }
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 66d0634e7a96..b66a0c2d990d 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -22,7 +22,6 @@
 #include <asm/cacheflush.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 
 #include <mach/iomap.h>
@@ -127,20 +126,10 @@ void __init smp_init_cpus(void)
 		cpu_set(i, cpu_possible_map);
 }
 
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	unsigned int ncores = scu_get_core_count(scu_base);
-	unsigned int cpu = smp_processor_id();
 	int i;
 
-	smp_store_cpu_info(cpu);
-
-	/*
-	 * are we trying to boot more cores than exist?
-	 */
-	if (max_cpus > ncores)
-		max_cpus = ncores;
-
 	/*
 	 * Initialise the present map, which describes the set of CPUs
 	 * actually populated at the present time.
@@ -148,8 +137,5 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
 
-	if (max_cpus > 1) {
-		percpu_timer_setup();
-		scu_enable(scu_base);
-	}
+	scu_enable(scu_base);
 }
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index fd40fa175913..458a288981cb 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -18,7 +18,6 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
-#include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
 
@@ -138,20 +137,10 @@ void __init smp_init_cpus(void)
 		set_cpu_possible(i, true);
 }
 
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	unsigned int ncores = num_possible_cpus();
-	unsigned int cpu = smp_processor_id();
 	int i;
 
-	smp_store_cpu_info(cpu);
-
-	/*
-	 * are we trying to boot more cores than exist?
-	 */
-	if (max_cpus > ncores)
-		max_cpus = ncores;
-
 	/*
 	 * Initialise the present map, which describes the set of CPUs
 	 * actually populated at the present time.
@@ -159,13 +148,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
 
-	if (max_cpus > 1) {
-		/*
-		 * Enable the local timer or broadcast device for the
-		 * boot CPU, but only if we have more than one CPU.
-		 */
-		percpu_timer_setup();
-		scu_enable(__io_address(UX500_SCU_BASE));
-		wakeup_secondary();
-	}
+	scu_enable(__io_address(UX500_SCU_BASE));
+	wakeup_secondary();
 }
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index b5a758683668..a0341d14ff2a 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -17,7 +17,6 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
-#include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 #include <asm/unified.h>
 
@@ -136,20 +135,10 @@ void __init smp_init_cpus(void)
 		set_cpu_possible(i, true);
 }
 
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	unsigned int ncores = num_possible_cpus();
-	unsigned int cpu = smp_processor_id();
 	int i;
 
-	smp_store_cpu_info(cpu);
-
-	/*
-	 * are we trying to boot more cores than exist?
-	 */
-	if (max_cpus > ncores)
-		max_cpus = ncores;
-
 	/*
 	 * Initialise the present map, which describes the set of CPUs
 	 * actually populated at the present time.
@@ -157,27 +146,15 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
 
+	scu_enable(scu_base_addr());
+
 	/*
-	 * Initialise the SCU if there are more than one CPU and let
-	 * them know where to start.
+	 * Write the address of secondary startup into the
+	 * system-wide flags register. The boot monitor waits
+	 * until it receives a soft interrupt, and then the
+	 * secondary CPU branches to this address.
 	 */
-	if (max_cpus > 1) {
-		/*
-		 * Enable the local timer or broadcast device for the
-		 * boot CPU, but only if we have more than one CPU.
-		 */
-		percpu_timer_setup();
-
-		scu_enable(scu_base_addr());
-
-		/*
-		 * Write the address of secondary startup into the
-		 * system-wide flags register. The boot monitor waits
-		 * until it receives a soft interrupt, and then the
-		 * secondary CPU branches to this address.
-		 */
-		writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR));
-		writel(BSYM(virt_to_phys(vexpress_secondary_startup)),
-			MMIO_P2V(V2M_SYS_FLAGSSET));
-	}
+	writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR));
+	writel(BSYM(virt_to_phys(vexpress_secondary_startup)),
+		MMIO_P2V(V2M_SYS_FLAGSSET));
 }

From 2c0136dba4e43b0916ccc9ecc7f11e6d6b73f046 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Fri, 3 Dec 2010 15:00:49 +0000
Subject: [PATCH 1050/1066] ARM: SMP: consolidate trace_hardirqs_off() into
 common SMP code

All platforms call trace_hardirqs_off() in their secondary startup code,
so move this into the core SMP code - it doesn't need to be in the
per-platform code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/smp.c            | 1 +
 arch/arm/mach-omap2/omap-smp.c   | 2 --
 arch/arm/mach-realview/platsmp.c | 2 --
 arch/arm/mach-s5pv310/platsmp.c  | 2 --
 arch/arm/mach-tegra/platsmp.c    | 2 --
 arch/arm/mach-ux500/platsmp.c    | 2 --
 arch/arm/mach-vexpress/platsmp.c | 2 --
 7 files changed, 1 insertion(+), 12 deletions(-)

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index c66f2d3f65d3..a30c4094db3a 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -317,6 +317,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 
 	cpu_init();
 	preempt_disable();
+	trace_hardirqs_off();
 
 	/*
 	 * Give the platform a chance to do its own initialisation.
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 3c3d6796c97c..9fed631ba046 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -32,8 +32,6 @@ static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
-	trace_hardirqs_off();
-
 	/*
 	 * If any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 380562cd6580..226c63102a00 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -53,8 +53,6 @@ static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
-	trace_hardirqs_off();
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-s5pv310/platsmp.c
index 51c44d4c9890..18aaf5f54033 100644
--- a/arch/arm/mach-s5pv310/platsmp.c
+++ b/arch/arm/mach-s5pv310/platsmp.c
@@ -46,8 +46,6 @@ static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
-	trace_hardirqs_off();
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index b66a0c2d990d..c729cd72cc3b 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -40,8 +40,6 @@ static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
-	trace_hardirqs_off();
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 458a288981cb..ddedbc80c41f 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -31,8 +31,6 @@ static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
-	trace_hardirqs_off();
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index a0341d14ff2a..d7e0cb994e9d 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -43,8 +43,6 @@ static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
-	trace_hardirqs_off();
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled

From 3c030beabf937b1d3b4ecaedfd1fb2f1e2aa0c70 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Tue, 30 Nov 2010 11:07:35 +0000
Subject: [PATCH 1051/1066] ARM: CPU hotplug: move cpu_killed completion to
 core code

We always need to wait for the dying CPU to reach a safe state before
taking it down, irrespective of the requirements of the platform.
Move the completion code into the ARM SMP hotplug code rather than
having each platform re-implement this.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/smp.c              | 14 +++++++++++++-
 arch/arm/mach-omap2/omap-hotplug.c |  8 ++------
 arch/arm/mach-realview/hotplug.c   |  8 +-------
 arch/arm/mach-s5pv310/hotplug.c    |  8 +-------
 arch/arm/mach-tegra/hotplug.c      |  8 +-------
 arch/arm/mach-ux500/hotplug.c      |  8 +-------
 6 files changed, 19 insertions(+), 35 deletions(-)

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index a30c4094db3a..8c81ff9b3732 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -24,6 +24,7 @@
 #include <linux/irq.h>
 #include <linux/percpu.h>
 #include <linux/clockchips.h>
+#include <linux/completion.h>
 
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
@@ -238,12 +239,20 @@ int __cpu_disable(void)
 	return 0;
 }
 
+static DECLARE_COMPLETION(cpu_died);
+
 /*
  * called on the thread which is asking for a CPU to be shutdown -
  * waits until shutdown has completed, or it is timed out.
  */
 void __cpu_die(unsigned int cpu)
 {
+	if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
+		pr_err("CPU%u: cpu didn't die\n", cpu);
+		return;
+	}
+	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
+
 	if (!platform_cpu_kill(cpu))
 		printk("CPU%u: unable to kill\n", cpu);
 }
@@ -263,9 +272,12 @@ void __ref cpu_die(void)
 	local_irq_disable();
 	idle_task_exit();
 
+	/* Tell __cpu_die() that this CPU is now safe to dispose of */
+	complete(&cpu_died);
+
 	/*
 	 * actual CPU shutdown procedure is at least platform (if not
-	 * CPU) specific
+	 * CPU) specific.
 	 */
 	platform_cpu_die(cpu);
 
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index 6cee456ca542..ace979d74bfc 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -17,16 +17,13 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/smp.h>
-#include <linux/completion.h>
 
 #include <asm/cacheflush.h>
 #include <mach/omap4-common.h>
 
-static DECLARE_COMPLETION(cpu_killed);
-
 int platform_cpu_kill(unsigned int cpu)
 {
-	return wait_for_completion_timeout(&cpu_killed, 5000);
+	return 1;
 }
 
 /*
@@ -42,8 +39,7 @@ void platform_cpu_die(unsigned int cpu)
 			   this_cpu, cpu);
 		BUG();
 	}
-	pr_notice("CPU%u: shutdown\n", cpu);
-	complete(&cpu_killed);
+
 	flush_cache_all();
 	dsb();
 
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index f95521a5e5ce..7d58c16c83a7 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -11,14 +11,11 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/smp.h>
-#include <linux/completion.h>
 
 #include <asm/cacheflush.h>
 
 extern volatile int pen_release;
 
-static DECLARE_COMPLETION(cpu_killed);
-
 static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
@@ -95,7 +92,7 @@ static inline void platform_do_lowpower(unsigned int cpu)
 
 int platform_cpu_kill(unsigned int cpu)
 {
-	return wait_for_completion_timeout(&cpu_killed, 5000);
+	return 1;
 }
 
 /*
@@ -115,9 +112,6 @@ void platform_cpu_die(unsigned int cpu)
 	}
 #endif
 
-	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
-	complete(&cpu_killed);
-
 	/*
 	 * we're ready for shutdown now, so do it
 	 */
diff --git a/arch/arm/mach-s5pv310/hotplug.c b/arch/arm/mach-s5pv310/hotplug.c
index 03652c3605f6..d7be70ac7536 100644
--- a/arch/arm/mach-s5pv310/hotplug.c
+++ b/arch/arm/mach-s5pv310/hotplug.c
@@ -13,14 +13,11 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/smp.h>
-#include <linux/completion.h>
 
 #include <asm/cacheflush.h>
 
 extern volatile int pen_release;
 
-static DECLARE_COMPLETION(cpu_killed);
-
 static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
@@ -98,7 +95,7 @@ static inline void platform_do_lowpower(unsigned int cpu)
 
 int platform_cpu_kill(unsigned int cpu)
 {
-	return wait_for_completion_timeout(&cpu_killed, 5000);
+	return 1;
 }
 
 /*
@@ -118,9 +115,6 @@ void platform_cpu_die(unsigned int cpu)
 	}
 #endif
 
-	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
-	complete(&cpu_killed);
-
 	/*
 	 * we're ready for shutdown now, so do it
 	 */
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index 8e7f115aa21e..ecaa41ce4976 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -11,12 +11,9 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/smp.h>
-#include <linux/completion.h>
 
 #include <asm/cacheflush.h>
 
-static DECLARE_COMPLETION(cpu_killed);
-
 static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
@@ -94,7 +91,7 @@ static inline void platform_do_lowpower(unsigned int cpu)
 
 int platform_cpu_kill(unsigned int cpu)
 {
-	return wait_for_completion_timeout(&cpu_killed, 5000);
+	return 1;
 }
 
 /*
@@ -114,9 +111,6 @@ void platform_cpu_die(unsigned int cpu)
 	}
 #endif
 
-	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
-	complete(&cpu_killed);
-
 	/*
 	 * we're ready for shutdown now, so do it
 	 */
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
index b782a03024be..7a4890b96e5c 100644
--- a/arch/arm/mach-ux500/hotplug.c
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -11,14 +11,11 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/smp.h>
-#include <linux/completion.h>
 
 #include <asm/cacheflush.h>
 
 extern volatile int pen_release;
 
-static DECLARE_COMPLETION(cpu_killed);
-
 static inline void platform_do_lowpower(unsigned int cpu)
 {
 	flush_cache_all();
@@ -38,7 +35,7 @@ static inline void platform_do_lowpower(unsigned int cpu)
 
 int platform_cpu_kill(unsigned int cpu)
 {
-	return wait_for_completion_timeout(&cpu_killed, 5000);
+	return 1;
 }
 
 /*
@@ -58,9 +55,6 @@ void platform_cpu_die(unsigned int cpu)
 	}
 #endif
 
-	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
-	complete(&cpu_killed);
-
 	/* directly enter low power state, skipping secure registers */
 	platform_do_lowpower(cpu);
 }

From bbc81fd4327f9ed4480b05981e38acd48b1d184a Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Tue, 30 Nov 2010 11:12:30 +0000
Subject: [PATCH 1052/1066] ARM: CPU hotplug: remove bug checks in
 platform_cpu_die()

platform_cpu_die() is entered from the CPU's own idle thread, which
can not be migrated to other CPUs.  Moreover, the 'cpu' argument
comes from the thread info, which will always be the 'current'
CPU.  So remove this useless bug check.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/omap-hotplug.c |  8 --------
 arch/arm/mach-realview/hotplug.c   | 10 ----------
 arch/arm/mach-s5pv310/hotplug.c    | 10 ----------
 arch/arm/mach-tegra/hotplug.c      | 10 ----------
 arch/arm/mach-ux500/hotplug.c      | 10 ----------
 5 files changed, 48 deletions(-)

diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index ace979d74bfc..4976b9393e49 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -32,14 +32,6 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
-	unsigned int this_cpu = hard_smp_processor_id();
-
-	if (cpu != this_cpu) {
-		pr_crit("platform_cpu_die running on %u, should be %u\n",
-			   this_cpu, cpu);
-		BUG();
-	}
-
 	flush_cache_all();
 	dsb();
 
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index 7d58c16c83a7..e06572e6c490 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -102,16 +102,6 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
-#ifdef DEBUG
-	unsigned int this_cpu = hard_smp_processor_id();
-
-	if (cpu != this_cpu) {
-		printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
-			   this_cpu, cpu);
-		BUG();
-	}
-#endif
-
 	/*
 	 * we're ready for shutdown now, so do it
 	 */
diff --git a/arch/arm/mach-s5pv310/hotplug.c b/arch/arm/mach-s5pv310/hotplug.c
index d7be70ac7536..ea951ef6ea54 100644
--- a/arch/arm/mach-s5pv310/hotplug.c
+++ b/arch/arm/mach-s5pv310/hotplug.c
@@ -105,16 +105,6 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
-#ifdef DEBUG
-	unsigned int this_cpu = hard_smp_processor_id();
-
-	if (cpu != this_cpu) {
-		printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
-			   this_cpu, cpu);
-		BUG();
-	}
-#endif
-
 	/*
 	 * we're ready for shutdown now, so do it
 	 */
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index ecaa41ce4976..a5eeb9126645 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -101,16 +101,6 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
-#ifdef DEBUG
-	unsigned int this_cpu = hard_smp_processor_id();
-
-	if (cpu != this_cpu) {
-		printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
-			   this_cpu, cpu);
-		BUG();
-	}
-#endif
-
 	/*
 	 * we're ready for shutdown now, so do it
 	 */
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
index 7a4890b96e5c..dd8037ebccf8 100644
--- a/arch/arm/mach-ux500/hotplug.c
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -45,16 +45,6 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
-#ifdef DEBUG
-	unsigned int this_cpu = hard_smp_processor_id();
-
-	if (cpu != this_cpu) {
-		printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
-			   this_cpu, cpu);
-		BUG();
-	}
-#endif
-
 	/* directly enter low power state, skipping secure registers */
 	platform_do_lowpower(cpu);
 }

From f36d340122ae8744e64af0a92a6f77b97542c0a4 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Tue, 30 Nov 2010 12:21:30 +0000
Subject: [PATCH 1053/1066] ARM: CPU hotplug: ensure correct ordering of unplug

Don't call idle_task_exit() with interrupts disabled, and ensure
that we have a memory barrier after interrupts are disabled but
before signalling that this CPU has shut down.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/smp.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 8c81ff9b3732..1a1c5e2b3ef9 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -269,9 +269,11 @@ void __ref cpu_die(void)
 {
 	unsigned int cpu = smp_processor_id();
 
-	local_irq_disable();
 	idle_task_exit();
 
+	local_irq_disable();
+	mb();
+
 	/* Tell __cpu_die() that this CPU is now safe to dispose of */
 	complete(&cpu_died);
 

From 86e62b93368cffca9111996e3ed9e5b7bf6f0af3 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Tue, 30 Nov 2010 18:24:57 +0000
Subject: [PATCH 1054/1066] ARM: SMP: remove smp_mpidr.h

With "ARM: CPU hotplug: remove bug checks in platform_cpu_die()", we
now do not use hard_smp_processor_id(), we no longer need to read the
hardware processor ID.  Remove the include providing this function.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/smp_mpidr.h          | 17 -----------------
 arch/arm/mach-realview/include/mach/smp.h |  1 -
 arch/arm/mach-s5pv310/include/mach/smp.h  |  1 -
 arch/arm/mach-tegra/include/mach/smp.h    |  1 -
 arch/arm/mach-ux500/include/mach/smp.h    |  1 -
 arch/arm/mach-vexpress/include/mach/smp.h |  1 -
 arch/arm/plat-omap/include/plat/smp.h     |  1 -
 7 files changed, 23 deletions(-)
 delete mode 100644 arch/arm/include/asm/smp_mpidr.h

diff --git a/arch/arm/include/asm/smp_mpidr.h b/arch/arm/include/asm/smp_mpidr.h
deleted file mode 100644
index 6a9307d64900..000000000000
--- a/arch/arm/include/asm/smp_mpidr.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef ASMARM_SMP_MIDR_H
-#define ASMARM_SMP_MIDR_H
-
-#define hard_smp_processor_id()						\
-	({								\
-		unsigned int cpunum;					\
-		__asm__("\n"						\
-			"1:	mrc p15, 0, %0, c0, c0, 5\n"		\
-			"	.pushsection \".alt.smp.init\", \"a\"\n"\
-			"	.long	1b\n"				\
-			"	mov	%0, #0\n"			\
-			"	.popsection"				\
-			: "=r" (cpunum));				\
-		cpunum &= 0x0F;						\
-	})
-
-#endif
diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h
index d1aa70415a4e..c8221b38ee7c 100644
--- a/arch/arm/mach-realview/include/mach/smp.h
+++ b/arch/arm/mach-realview/include/mach/smp.h
@@ -2,7 +2,6 @@
 #define ASMARM_ARCH_SMP_H
 
 #include <asm/hardware/gic.h>
-#include <asm/smp_mpidr.h>
 
 /*
  * We use IRQ1 as the IPI
diff --git a/arch/arm/mach-s5pv310/include/mach/smp.h b/arch/arm/mach-s5pv310/include/mach/smp.h
index 2897747bcb07..77e5a841f741 100644
--- a/arch/arm/mach-s5pv310/include/mach/smp.h
+++ b/arch/arm/mach-s5pv310/include/mach/smp.h
@@ -7,7 +7,6 @@
 #define ASM_ARCH_SMP_H __FILE__
 
 #include <asm/hardware/gic.h>
-#include <asm/smp_mpidr.h>
 
 extern void __iomem *gic_cpu_base_addr;
 
diff --git a/arch/arm/mach-tegra/include/mach/smp.h b/arch/arm/mach-tegra/include/mach/smp.h
index d1aa70415a4e..c8221b38ee7c 100644
--- a/arch/arm/mach-tegra/include/mach/smp.h
+++ b/arch/arm/mach-tegra/include/mach/smp.h
@@ -2,7 +2,6 @@
 #define ASMARM_ARCH_SMP_H
 
 #include <asm/hardware/gic.h>
-#include <asm/smp_mpidr.h>
 
 /*
  * We use IRQ1 as the IPI
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
index bd57c50a5b86..ca2b15b1b3b1 100644
--- a/arch/arm/mach-ux500/include/mach/smp.h
+++ b/arch/arm/mach-ux500/include/mach/smp.h
@@ -10,7 +10,6 @@
 #define ASMARM_ARCH_SMP_H
 
 #include <asm/hardware/gic.h>
-#include <asm/smp_mpidr.h>
 
 /* This is required to wakeup the secondary core */
 extern void u8500_secondary_startup(void);
diff --git a/arch/arm/mach-vexpress/include/mach/smp.h b/arch/arm/mach-vexpress/include/mach/smp.h
index 721be0f0311d..4c05e4a9713a 100644
--- a/arch/arm/mach-vexpress/include/mach/smp.h
+++ b/arch/arm/mach-vexpress/include/mach/smp.h
@@ -2,7 +2,6 @@
 #define __MACH_SMP_H
 
 #include <asm/hardware/gic.h>
-#include <asm/smp_mpidr.h>
 
 /*
  * We use IRQ1 as the IPI
diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h
index e5541e5388be..7a10257909ef 100644
--- a/arch/arm/plat-omap/include/plat/smp.h
+++ b/arch/arm/plat-omap/include/plat/smp.h
@@ -18,7 +18,6 @@
 #define OMAP_ARCH_SMP_H
 
 #include <asm/hardware/gic.h>
-#include <asm/smp_mpidr.h>
 
 /* Needed for secondary core boot */
 extern void omap_secondary_startup(void);

From ed3768a8d9dc2d345d4f27eb44ee1e4825056c08 Mon Sep 17 00:00:00 2001
From: Dave Martin <dave.martin@linaro.org>
Date: Wed, 1 Dec 2010 15:39:23 +0100
Subject: [PATCH 1055/1066] ARM: 6516/1: Allow SMP_ON_UP to work with Thumb-2
 kernels.

  * __fixup_smp_on_up has been modified with support for the
    THUMB2_KERNEL case.  For THUMB2_KERNEL only, fixups are split
    into halfwords in case of misalignment, since we can't rely on
    unaligned accesses working before turning the MMU on.

    No attempt is made to optimise the aligned case, since the
    number of fixups is typically small, and it seems best to keep
    the code as simple as possible.

  * Add a rotate in the fixup_smp code in order to support
    CPU_BIG_ENDIAN, as suggested by Nicolas Pitre.

  * Add an assembly-time sanity-check to ALT_UP() to ensure that
    the content really is the right size (4 bytes).

    (No check is done for ALT_SMP().  Possibly, this could be fixed
    by splitting the two uses ot ALT_SMP() (ALT_SMP...SMP_UP versus
    ALT_SMP...SMP_UP_B) into two macros.  In the first case,
    ALT_SMP needs to expand to >= 4 bytes, not == 4.)

  * smp_mpidr.h (which implements ALT_SMP()/ALT_UP() manually due
    to macro limitations) has not been modified: the affected
    instruction (mov) has no 16-bit encoding, so the correct
    instruction size is satisfied in this case.

  * A "mode" parameter has been added to smp_dmb:

    smp_dmb arm @ assumes 4-byte instructions (for ARM code, e.g. kuser)
    smp_dmb     @ uses W() to ensure 4-byte instructions for ALT_SMP()

    This avoids assembly failures due to use of W() inside smp_dmb,
    when assembling pure-ARM code in the vectors page.

    There might be a better way to achieve this.

  * Kconfig: make SMP_ON_UP depend on
    (!THUMB2_KERNEL || !BIG_ENDIAN) i.e., THUMB2_KERNEL is now
    supported, but only if !BIG_ENDIAN (The fixup code for Thumb-2
    currently assumes little-endian order.)

Tested using a single generic realview kernel on:
	ARM RealView PB-A8 (CONFIG_THUMB2_KERNEL={n,y})
	ARM RealView PBX-A9 (SMP)

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                 |  2 +-
 arch/arm/include/asm/assembler.h | 22 +++++++++++++++++++---
 arch/arm/kernel/entry-armv.S     |  4 ++--
 arch/arm/kernel/head.S           | 13 ++++++++++---
 4 files changed, 32 insertions(+), 9 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index db524e75c4a2..290a4b57617f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1229,7 +1229,7 @@ config SMP
 config SMP_ON_UP
 	bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
-	depends on SMP && !XIP && !THUMB2_KERNEL
+	depends on SMP && !XIP
 	default y
 	help
 	  SMP kernels contain instructions which fail on non-SMP processors.
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 749bb6622404..72d3389e9c12 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -157,16 +157,24 @@
 #ifdef CONFIG_SMP
 #define ALT_SMP(instr...)					\
 9998:	instr
+/*
+ * Note: if you get assembler errors from ALT_UP() when building with
+ * CONFIG_THUMB2_KERNEL, you almost certainly need to use
+ * ALT_SMP( W(instr) ... )
+ */
 #define ALT_UP(instr...)					\
 	.pushsection ".alt.smp.init", "a"			;\
 	.long	9998b						;\
-	instr							;\
+9997:	instr							;\
+	.if . - 9997b != 4					;\
+		.error "ALT_UP() content must assemble to exactly 4 bytes";\
+	.endif							;\
 	.popsection
 #define ALT_UP_B(label)					\
 	.equ	up_b_offset, label - 9998b			;\
 	.pushsection ".alt.smp.init", "a"			;\
 	.long	9998b						;\
-	b	. + up_b_offset					;\
+	W(b)	. + up_b_offset					;\
 	.popsection
 #else
 #define ALT_SMP(instr...)
@@ -177,16 +185,24 @@
 /*
  * SMP data memory barrier
  */
-	.macro	smp_dmb
+	.macro	smp_dmb mode
 #ifdef CONFIG_SMP
 #if __LINUX_ARM_ARCH__ >= 7
+	.ifeqs "\mode","arm"
 	ALT_SMP(dmb)
+	.else
+	ALT_SMP(W(dmb))
+	.endif
 #elif __LINUX_ARM_ARCH__ == 6
 	ALT_SMP(mcr	p15, 0, r0, c7, c10, 5)	@ dmb
 #else
 #error Incompatible SMP platform
 #endif
+	.ifeqs "\mode","arm"
 	ALT_UP(nop)
+	.else
+	ALT_UP(W(nop))
+	.endif
 #endif
 	.endm
 
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 955cf5f539ed..7f22a11a5105 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -842,7 +842,7 @@ __kuser_helper_start:
  */
 
 __kuser_memory_barrier:				@ 0xffff0fa0
-	smp_dmb
+	smp_dmb	arm
 	usr_ret	lr
 
 	.align	5
@@ -959,7 +959,7 @@ kuser_cmpxchg_fixup:
 
 #else
 
-	smp_dmb
+	smp_dmb	arm
 1:	ldrex	r3, [r2]
 	subs	r3, r3, r0
 	strexeq	r3, r1, [r2]
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index fd94e4e82fc9..359e54e83bd5 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -412,10 +412,17 @@ __fixup_smp_on_up:
 	add	r4, r4, r3
 	add	r5, r5, r3
 2:	cmp	r4, r5
+	movhs	pc, lr
 	ldmia	r4!, {r0, r6}
-	strlo	r6, [r0, r3]
-	blo	2b
-	mov	pc, lr
+ ARM(	str	r6, [r0, r3]	)
+ THUMB(	add	r0, r0, r3	)
+#ifdef __ARMEB__
+ THUMB(	mov	r6, r6, ror #16	)	@ Convert word order for big-endian.
+#endif
+ THUMB(	strh	r6, [r0], #2	)	@ For Thumb-2, store as two halfwords
+ THUMB(	mov	r6, r6, lsr #16	)	@ to be robust against misaligned r3.
+ THUMB(	strh	r6, [r0]	)
+	b	2b
 ENDPROC(__fixup_smp)
 
 1:	.word	.

From 3705ff6da538aff6dba535e2e9cbcbb9456d0d53 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 18 Dec 2010 10:53:12 +0000
Subject: [PATCH 1056/1066] ARM: Fix subtle race in CPU pen_release hotplug
 code

There is a subtle race in the CPU hotplug code, where a CPU which has
been offlined can online itself before being requested, which results
in things going astray on the next online/offline cycle.

What happens in the normal online/offline/online cycle is:

	CPU0			CPU3
	requests boot of CPU3
	pen_release = 3
	flush cache line
				checks pen_release, reads 3
				starts boot
				pen_release = -1
	... requests CPU3 offline ...
				... dies ...
				checks pen_release, reads -1
	requests boot of CPU3
	pen_release = 3
	flush cache line
				checks pen_release, reads 3
				starts boot
				pen_release = -1

However, as the write of -1 of pen_release is not fully flushed back to
memory, and the checking of pen_release is done with caches disabled,
this allows CPU3 the opportunity to read the old value of pen_release:

	CPU0			CPU3
	requests boot of CPU3
	pen_release = 3
	flush cache line
				checks pen_release, reads 3
				starts boot
				pen_release = -1
	... requests CPU3 offline ...
				... dies ...
				checks pen_release, reads 3
				starts boot
				pen_release = -1
	requests boot of CPU3
	pen_release = 3
	flush cache line

Fix this by grouping the write of pen_release along with its cache line
flushing code to ensure that any update to pen_release is always pushed
out to physical memory.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/platsmp.c | 19 +++++++++++++++----
 arch/arm/mach-s5pv310/platsmp.c  | 20 +++++++++++++++-----
 arch/arm/mach-ux500/platsmp.c    | 22 +++++++++++++++-------
 arch/arm/mach-vexpress/platsmp.c | 20 +++++++++++++++-----
 4 files changed, 60 insertions(+), 21 deletions(-)

diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 226c63102a00..bb8d6c4e4315 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -36,6 +36,19 @@ extern void realview_secondary_startup(void);
  */
 volatile int __cpuinitdata pen_release = -1;
 
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not.  This is necessary for the hotplug code to work reliably.
+ */
+static void write_pen_release(int val)
+{
+	pen_release = val;
+	smp_wmb();
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
 static void __iomem *scu_base_addr(void)
 {
 	if (machine_is_realview_eb_mp())
@@ -64,8 +77,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point
 	 */
-	pen_release = -1;
-	smp_wmb();
+	write_pen_release(-1);
 
 	/*
 	 * Synchronise with the boot thread.
@@ -92,8 +104,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * Note that "pen_release" is the hardware CPU ID, whereas
 	 * "cpu" is Linux's internal ID.
 	 */
-	pen_release = cpu;
-	flush_cache_all();
+	write_pen_release(cpu);
 
 	/*
 	 * Send the secondary CPU a soft interrupt, thereby causing
diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-s5pv310/platsmp.c
index 18aaf5f54033..98c04748ed84 100644
--- a/arch/arm/mach-s5pv310/platsmp.c
+++ b/arch/arm/mach-s5pv310/platsmp.c
@@ -37,6 +37,19 @@ extern void s5pv310_secondary_startup(void);
 
 volatile int __cpuinitdata pen_release = -1;
 
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not.  This is necessary for the hotplug code to work reliably.
+ */
+static void write_pen_release(int val)
+{
+	pen_release = val;
+	smp_wmb();
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
 static void __iomem *scu_base_addr(void)
 {
 	return (void __iomem *)(S5P_VA_SCU);
@@ -57,8 +70,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point
 	 */
-	pen_release = -1;
-	smp_wmb();
+	write_pen_release(-1);
 
 	/*
 	 * Synchronise with the boot thread.
@@ -85,9 +97,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * Note that "pen_release" is the hardware CPU ID, whereas
 	 * "cpu" is Linux's internal ID.
 	 */
-	pen_release = cpu;
-	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
-	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+	write_pen_release(cpu);
 
 	/*
 	 * Send the secondary CPU a soft interrupt, thereby causing
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index ddedbc80c41f..f71175a766d7 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -27,6 +27,19 @@
  */
 volatile int __cpuinitdata pen_release = -1;
 
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not.  This is necessary for the hotplug code to work reliably.
+ */
+static void write_pen_release(int val)
+{
+	pen_release = val;
+	smp_wmb();
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
 static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
@@ -42,7 +55,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point
 	 */
-	pen_release = -1;
+	write_pen_release(-1);
 
 	/*
 	 * Synchronise with the boot thread.
@@ -66,9 +79,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * the holding pen - release it, then wait for it to flag
 	 * that it has been released by resetting pen_release.
 	 */
-	pen_release = cpu;
-	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
-	outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1);
+	write_pen_release(cpu);
 
 	smp_cross_call(cpumask_of(cpu), 1);
 
@@ -89,9 +100,6 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init wakeup_secondary(void)
 {
-	/* nobody is to be released from the pen yet */
-	pen_release = -1;
-
 	/*
 	 * write the address of secondary startup into the backup ram register
 	 * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index d7e0cb994e9d..8ce9fef29555 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -34,6 +34,19 @@ extern void vexpress_secondary_startup(void);
  */
 volatile int __cpuinitdata pen_release = -1;
 
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not.  This is necessary for the hotplug code to work reliably.
+ */
+static void write_pen_release(int val)
+{
+	pen_release = val;
+	smp_wmb();
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
 static void __iomem *scu_base_addr(void)
 {
 	return MMIO_P2V(A9_MPCORE_SCU);
@@ -54,8 +67,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point
 	 */
-	pen_release = -1;
-	smp_wmb();
+	write_pen_release(-1);
 
 	/*
 	 * Synchronise with the boot thread.
@@ -80,9 +92,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * since we haven't sent them a soft interrupt, they shouldn't
 	 * be there.
 	 */
-	pen_release = cpu;
-	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
-	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+	write_pen_release(cpu);
 
 	/*
 	 * Send the secondary CPU a soft interrupt, thereby causing

From 90b44199e83ec780d6def11a602d825dc68438e3 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 18 Dec 2010 10:59:49 +0000
Subject: [PATCH 1057/1066] ARM: VFP: re-initialize VFP coprocessor access
 enables on CPU hotplug

We can not guarantee that VFP will be enabled when CPU hotplug brings
a CPU back online from a reset state.  Add a hotplug CPU notifier to
ensure that the VFP coprocessor access is enabled whenever a CPU comes
back online.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/vfp/vfpmodule.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 8063a322c790..0797cb528b46 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -10,9 +10,12 @@
  */
 #include <linux/module.h>
 #include <linux/types.h>
+#include <linux/cpu.h>
 #include <linux/kernel.h>
+#include <linux/notifier.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
+#include <linux/smp.h>
 #include <linux/init.h>
 
 #include <asm/cputype.h>
@@ -484,7 +487,24 @@ void vfp_flush_hwstate(struct thread_info *thread)
 	put_cpu();
 }
 
-#include <linux/smp.h>
+/*
+ * VFP hardware can lose all context when a CPU goes offline.
+ * Safely clear our held state when a CPU has been killed, and
+ * re-enable access to VFP when the CPU comes back online.
+ *
+ * Both CPU_DYING and CPU_STARTING are called on the CPU which
+ * is being offlined/onlined.
+ */
+static int vfp_hotplug(struct notifier_block *b, unsigned long action,
+	void *hcpu)
+{
+	if (action == CPU_DYING || action == CPU_DYING_FROZEN) {
+		unsigned int cpu = (long)hcpu;
+		last_VFP_context[cpu] = NULL;
+	} else if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
+		vfp_enable(NULL);
+	return NOTIFY_OK;
+}
 
 /*
  * VFP support code initialisation.
@@ -514,6 +534,8 @@ static int __init vfp_init(void)
 	else if (vfpsid & FPSID_NODOUBLE) {
 		printk("no double precision support\n");
 	} else {
+		hotcpu_notifier(vfp_hotplug, 0);
+
 		smp_call_function(vfp_enable, NULL, 1);
 
 		VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT;  /* Extract the architecture version */

From 58613cd1d4f8c2d5f25b6c57ad7fbed80e75a67b Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 18 Dec 2010 12:34:39 +0000
Subject: [PATCH 1058/1066] ARM: smp: improve CPU bringup failure diagnostics

We used to print a bland error message which gave no clue as to the
failure when we failed to bring up a secondary CPU.  Resolve this by
separating the two failure cases.

If boot_secondary() fails, we print a message indicating the returned
error code from boot_secondary():
	"CPU%u: failed to boot: %d\n", cpu, ret.

However, if boot_secondary() succeeded, but the CPU did not appear to
mark itself online within the timeout, indicate that it failed to come
online:
	"CPU%u: failed to come online\n", cpu

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/smp.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 1a1c5e2b3ef9..6afaf6f73069 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -164,8 +164,12 @@ int __cpuinit __cpu_up(unsigned int cpu)
 			barrier();
 		}
 
-		if (!cpu_online(cpu))
+		if (!cpu_online(cpu)) {
+			pr_crit("CPU%u: failed to come online\n", cpu);
 			ret = -EIO;
+		}
+	} else {
+		pr_err("CPU%u: failed to boot: %d\n", cpu, ret);
 	}
 
 	secondary_data.stack = NULL;
@@ -181,14 +185,6 @@ int __cpuinit __cpu_up(unsigned int cpu)
 
 	pgd_free(&init_mm, pgd);
 
-	if (ret) {
-		printk(KERN_CRIT "CPU%u: processor failed to boot\n", cpu);
-
-		/*
-		 * FIXME: We need to clean up the new idle thread. --rmk
-		 */
-	}
-
 	return ret;
 }
 

From d4450261e546953c4a1ce8b48e29164a57c6ed33 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 19 Dec 2010 11:30:43 +0000
Subject: [PATCH 1059/1066] ARM: CPU hotplug: fix reporting of spurious wakeups

The original scheme for reporting spurious wakeups was broken - it
tried to use printk() from a context which wasn't coherent with the
other CPUs, which risks corrupting the printk() data.

Fix this by noting the number spurious wakeups, and only report them
when we are properly woken - when we will be coherent with the rest
of the system.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/hotplug.c | 20 +++++++++++---------
 arch/arm/mach-s5pv310/hotplug.c  | 20 +++++++++++---------
 arch/arm/mach-tegra/hotplug.c    | 20 +++++++++++---------
 3 files changed, 33 insertions(+), 27 deletions(-)

diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index e06572e6c490..b6387cfe7044 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -53,7 +53,7 @@ static inline void cpu_leave_lowpower(void)
 	  : "cc");
 }
 
-static inline void platform_do_lowpower(unsigned int cpu)
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 {
 	/*
 	 * there is no power-control hardware on this platform, so all
@@ -77,16 +77,13 @@ static inline void platform_do_lowpower(unsigned int cpu)
 		}
 
 		/*
-		 * getting here, means that we have come out of WFI without
+		 * Getting here, means that we have come out of WFI without
 		 * having been woken up - this shouldn't happen
 		 *
-		 * The trouble is, letting people know about this is not really
-		 * possible, since we are currently running incoherently, and
-		 * therefore cannot safely call printk() or anything else
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
 		 */
-#ifdef DEBUG
-		printk("CPU%u: spurious wakeup call\n", cpu);
-#endif
+		(*spurious)++;
 	}
 }
 
@@ -102,17 +99,22 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
+	int spurious = 0;
+
 	/*
 	 * we're ready for shutdown now, so do it
 	 */
 	cpu_enter_lowpower();
-	platform_do_lowpower(cpu);
+	platform_do_lowpower(cpu, &spurious);
 
 	/*
 	 * bring this CPU back into the world of cache
 	 * coherency, and then restore interrupts
 	 */
 	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
 }
 
 int platform_cpu_disable(unsigned int cpu)
diff --git a/arch/arm/mach-s5pv310/hotplug.c b/arch/arm/mach-s5pv310/hotplug.c
index ea951ef6ea54..951ba6d63d21 100644
--- a/arch/arm/mach-s5pv310/hotplug.c
+++ b/arch/arm/mach-s5pv310/hotplug.c
@@ -56,7 +56,7 @@ static inline void cpu_leave_lowpower(void)
 	  : "cc");
 }
 
-static inline void platform_do_lowpower(unsigned int cpu)
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 {
 	/*
 	 * there is no power-control hardware on this platform, so all
@@ -80,16 +80,13 @@ static inline void platform_do_lowpower(unsigned int cpu)
 		}
 
 		/*
-		 * getting here, means that we have come out of WFI without
+		 * Getting here, means that we have come out of WFI without
 		 * having been woken up - this shouldn't happen
 		 *
-		 * The trouble is, letting people know about this is not really
-		 * possible, since we are currently running incoherently, and
-		 * therefore cannot safely call printk() or anything else
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
 		 */
-#ifdef DEBUG
-		printk(KERN_WARN "CPU%u: spurious wakeup call\n", cpu);
-#endif
+		(*spurious)++;
 	}
 }
 
@@ -105,17 +102,22 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
+	int spurious = 0;
+
 	/*
 	 * we're ready for shutdown now, so do it
 	 */
 	cpu_enter_lowpower();
-	platform_do_lowpower(cpu);
+	platform_do_lowpower(cpu, &spurious);
 
 	/*
 	 * bring this CPU back into the world of cache
 	 * coherency, and then restore interrupts
 	 */
 	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
 }
 
 int platform_cpu_disable(unsigned int cpu)
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index a5eeb9126645..17faf777af23 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -52,7 +52,7 @@ static inline void cpu_leave_lowpower(void)
 	  : "cc");
 }
 
-static inline void platform_do_lowpower(unsigned int cpu)
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 {
 	/*
 	 * there is no power-control hardware on this platform, so all
@@ -76,16 +76,13 @@ static inline void platform_do_lowpower(unsigned int cpu)
 		/*}*/
 
 		/*
-		 * getting here, means that we have come out of WFI without
+		 * Getting here, means that we have come out of WFI without
 		 * having been woken up - this shouldn't happen
 		 *
-		 * The trouble is, letting people know about this is not really
-		 * possible, since we are currently running incoherently, and
-		 * therefore cannot safely call printk() or anything else
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
 		 */
-#ifdef DEBUG
-		printk(KERN_WARN "CPU%u: spurious wakeup call\n", cpu);
-#endif
+		(*spurious)++;
 	}
 }
 
@@ -101,17 +98,22 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
+	int spurious = 0;
+
 	/*
 	 * we're ready for shutdown now, so do it
 	 */
 	cpu_enter_lowpower();
-	platform_do_lowpower(cpu);
+	platform_do_lowpower(cpu, &spurious);
 
 	/*
 	 * bring this CPU back into the world of cache
 	 * coherency, and then restore interrupts
 	 */
 	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
 }
 
 int platform_cpu_disable(unsigned int cpu)

From e9882777d992b76e0b80deadd66ad886c25f5d1f Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 19 Dec 2010 11:33:12 +0000
Subject: [PATCH 1060/1066] ARM: CPU hotplug: add Versatile Express hotplug CPU
 support

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-vexpress/Makefile  |   1 +
 arch/arm/mach-vexpress/hotplug.c | 128 +++++++++++++++++++++++++++++++
 2 files changed, 129 insertions(+)
 create mode 100644 arch/arm/mach-vexpress/hotplug.c

diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index 1b71b77ade22..2c0ac7de2814 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -5,4 +5,5 @@
 obj-y					:= v2m.o
 obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)	+= ct-ca9x4.o
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
 obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c
new file mode 100644
index 000000000000..ea4cbfb90a66
--- /dev/null
+++ b/arch/arm/mach-vexpress/hotplug.c
@@ -0,0 +1,128 @@
+/*
+ *  linux/arch/arm/mach-realview/hotplug.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+
+extern volatile int pen_release;
+
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+		"mcr	p15, 0, %1, c7, c5, 0\n"
+	"	mcr	p15, 0, %1, c7, c10, 4\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, %3\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	  : "=&r" (v)
+	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(
+		"mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	  : "=&r" (v)
+	  : "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+{
+	/*
+	 * there is no power-control hardware on this platform, so all
+	 * we can do is put the core into WFI; this is safe as the calling
+	 * code will have already disabled interrupts
+	 */
+	for (;;) {
+		/*
+		 * here's the WFI
+		 */
+		asm(".word	0xe320f003\n"
+		    :
+		    :
+		    : "memory", "cc");
+
+		if (pen_release == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+
+		/*
+		 * Getting here, means that we have come out of WFI without
+		 * having been woken up - this shouldn't happen
+		 *
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
+		 */
+		(*spurious)++;
+	}
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+	int spurious = 0;
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	cpu_enter_lowpower();
+	platform_do_lowpower(cpu, &spurious);
+
+	/*
+	 * bring this CPU back into the world of cache
+	 * coherency, and then restore interrupts
+	 */
+	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}

From e3d9c625f5e4158014e041f492b46e38ad10987e Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 19 Dec 2010 11:36:33 +0000
Subject: [PATCH 1061/1066] ARM: CPU hotplug: fix hard-coded control register
 constants

Use the definition we've provided in asm/system.h rather than
numeric constants.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/hotplug.c | 8 ++++----
 arch/arm/mach-s5pv310/hotplug.c  | 8 ++++----
 arch/arm/mach-tegra/hotplug.c    | 8 ++++----
 3 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index b6387cfe7044..a87523d095e6 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -31,10 +31,10 @@ static inline void cpu_enter_lowpower(void)
 	"	bic	%0, %0, #0x20\n"
 	"	mcr	p15, 0, %0, c1, c0, 1\n"
 	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, #0x04\n"
+	"	bic	%0, %0, %2\n"
 	"	mcr	p15, 0, %0, c1, c0, 0\n"
 	  : "=&r" (v)
-	  : "r" (0)
+	  : "r" (0), "Ir" (CR_C)
 	  : "cc");
 }
 
@@ -43,13 +43,13 @@ static inline void cpu_leave_lowpower(void)
 	unsigned int v;
 
 	asm volatile(	"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, #0x04\n"
+	"	orr	%0, %0, %1\n"
 	"	mcr	p15, 0, %0, c1, c0, 0\n"
 	"	mrc	p15, 0, %0, c1, c0, 1\n"
 	"	orr	%0, %0, #0x20\n"
 	"	mcr	p15, 0, %0, c1, c0, 1\n"
 	  : "=&r" (v)
-	  :
+	  : "Ir" (CR_C)
 	  : "cc");
 }
 
diff --git a/arch/arm/mach-s5pv310/hotplug.c b/arch/arm/mach-s5pv310/hotplug.c
index 951ba6d63d21..afa5392d9fc0 100644
--- a/arch/arm/mach-s5pv310/hotplug.c
+++ b/arch/arm/mach-s5pv310/hotplug.c
@@ -30,13 +30,13 @@ static inline void cpu_enter_lowpower(void)
 	 * Turn off coherency
 	 */
 	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, #0x20\n"
+	"	bic	%0, %0, %2\n"
 	"	mcr	p15, 0, %0, c1, c0, 1\n"
 	"	mrc	p15, 0, %0, c1, c0, 0\n"
 	"	bic	%0, %0, #0x04\n"
 	"	mcr	p15, 0, %0, c1, c0, 0\n"
 	  : "=&r" (v)
-	  : "r" (0)
+	  : "r" (0), "Ir" (CR_C)
 	  : "cc");
 }
 
@@ -46,13 +46,13 @@ static inline void cpu_leave_lowpower(void)
 
 	asm volatile(
 	"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, #0x04\n"
+	"	orr	%0, %0, %1\n"
 	"	mcr	p15, 0, %0, c1, c0, 0\n"
 	"	mrc	p15, 0, %0, c1, c0, 1\n"
 	"	orr	%0, %0, #0x20\n"
 	"	mcr	p15, 0, %0, c1, c0, 1\n"
 	  : "=&r" (v)
-	  :
+	  : "Ir" (CR_C)
 	  : "cc");
 }
 
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index 17faf777af23..a5cb1ce76ff2 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -26,13 +26,13 @@ static inline void cpu_enter_lowpower(void)
 	 * Turn off coherency
 	 */
 	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, #0x20\n"
+	"	bic	%0, %0, %2\n"
 	"	mcr	p15, 0, %0, c1, c0, 1\n"
 	"	mrc	p15, 0, %0, c1, c0, 0\n"
 	"	bic	%0, %0, #0x04\n"
 	"	mcr	p15, 0, %0, c1, c0, 0\n"
 	  : "=&r" (v)
-	  : "r" (0)
+	  : "r" (0), "Ir" (CR_C)
 	  : "cc");
 }
 
@@ -42,13 +42,13 @@ static inline void cpu_leave_lowpower(void)
 
 	asm volatile(
 	"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, #0x04\n"
+	"	orr	%0, %0, %1\n"
 	"	mcr	p15, 0, %0, c1, c0, 0\n"
 	"	mrc	p15, 0, %0, c1, c0, 1\n"
 	"	orr	%0, %0, #0x20\n"
 	"	mcr	p15, 0, %0, c1, c0, 1\n"
 	  : "=&r" (v)
-	  :
+	  : "Ir" (CR_C)
 	  : "cc");
 }
 

From 10034aabca9032246762daaca3152f3e79380ea0 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 20 Dec 2010 14:28:02 +0000
Subject: [PATCH 1062/1066] ARM: localtimer: clean up local timer on hot unplug

When a CPU is hot unplugged, the generic tick code cleans up the
clock event device, but fails to call down to the device's set_mode
function to actually shut the device down.

To work around this, we've historically had a local_timer_stop()
callback out of the hotplug code.  However, this adds needless
complexity when we have the clock event device itself available.

Explicitly call the clock event device's set_mode function with
CLOCK_EVT_MODE_UNUSED, so that the hardware can be cleanly shutdown
without any special external callbacks.  When/if the generic code
is fixed, percpu_timer_stop() can be killed off.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/localtimer.h | 12 ------------
 arch/arm/include/asm/smp_twd.h    |  1 -
 arch/arm/kernel/smp.c             | 19 ++++++++++++++++++-
 arch/arm/kernel/smp_twd.c         | 10 ----------
 4 files changed, 18 insertions(+), 24 deletions(-)

diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
index 50c7e7cfd670..6bc63ab498ce 100644
--- a/arch/arm/include/asm/localtimer.h
+++ b/arch/arm/include/asm/localtimer.h
@@ -30,7 +30,6 @@ asmlinkage void do_local_timer(struct pt_regs *);
 #include "smp_twd.h"
 
 #define local_timer_ack()	twd_timer_ack()
-#define local_timer_stop()	twd_timer_stop()
 
 #else
 
@@ -40,11 +39,6 @@ asmlinkage void do_local_timer(struct pt_regs *);
  */
 int local_timer_ack(void);
 
-/*
- * Stop a local timer interrupt.
- */
-void local_timer_stop(void);
-
 #endif
 
 /*
@@ -52,12 +46,6 @@ void local_timer_stop(void);
  */
 void local_timer_setup(struct clock_event_device *);
 
-#else
-
-static inline void local_timer_stop(void)
-{
-}
-
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
index 634f357be6bb..fed9981fba08 100644
--- a/arch/arm/include/asm/smp_twd.h
+++ b/arch/arm/include/asm/smp_twd.h
@@ -22,7 +22,6 @@ struct clock_event_device;
 
 extern void __iomem *twd_base;
 
-void twd_timer_stop(void);
 int twd_timer_ack(void);
 void twd_timer_setup(struct clock_event_device *);
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 6afaf6f73069..4dc864ef9cdf 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -189,6 +189,8 @@ int __cpuinit __cpu_up(unsigned int cpu)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
+static void percpu_timer_stop(void);
+
 /*
  * __cpu_disable runs on the processor to be shutdown.
  */
@@ -216,7 +218,7 @@ int __cpu_disable(void)
 	/*
 	 * Stop the local timer for this CPU.
 	 */
-	local_timer_stop();
+	percpu_timer_stop();
 
 	/*
 	 * Flush user cache and TLB mappings, and then remove this CPU
@@ -539,6 +541,21 @@ void __cpuinit percpu_timer_setup(void)
 	local_timer_setup(evt);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * The generic clock events code purposely does not stop the local timer
+ * on CPU_DEAD/CPU_DEAD_FROZEN hotplug events, so we have to do it
+ * manually here.
+ */
+static void percpu_timer_stop(void)
+{
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
+
+	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+}
+#endif
+
 static DEFINE_SPINLOCK(stop_lock);
 
 /*
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 35882fbf37f9..24585d97c104 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -150,13 +150,3 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 
 	clockevents_register_device(clk);
 }
-
-#ifdef CONFIG_HOTPLUG_CPU
-/*
- * take a local timer down
- */
-void twd_timer_stop(void)
-{
-	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
-}
-#endif

From 03b505eae6a276b8c38b6222694afb6cea10b1cc Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 20 Dec 2010 14:44:32 +0000
Subject: [PATCH 1063/1066] ARM: SMP: split out software TLB maintainence
 broadcasting

smp.c is becoming too large, so split out the TLB maintainence
broadcasting into a separate smp_tlb.c file.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/Makefile  |   2 +-
 arch/arm/kernel/smp.c     | 126 ----------------------------------
 arch/arm/kernel/smp_tlb.c | 139 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 140 insertions(+), 127 deletions(-)
 create mode 100644 arch/arm/kernel/smp_tlb.c

diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 5b9b268f4fbb..659937b0a896 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,7 +29,7 @@ obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
-obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_SMP)		+= smp.o smp_tlb.o
 obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
 obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 4dc864ef9cdf..6d0c66bc434d 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -38,7 +38,6 @@
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
 #include <asm/localtimer.h>
-#include <asm/smp_plat.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -655,128 +654,3 @@ int setup_profiling_timer(unsigned int multiplier)
 {
 	return -EINVAL;
 }
-
-static void
-on_each_cpu_mask(void (*func)(void *), void *info, int wait,
-		const struct cpumask *mask)
-{
-	preempt_disable();
-
-	smp_call_function_many(mask, func, info, wait);
-	if (cpumask_test_cpu(smp_processor_id(), mask))
-		func(info);
-
-	preempt_enable();
-}
-
-/**********************************************************************/
-
-/*
- * TLB operations
- */
-struct tlb_args {
-	struct vm_area_struct *ta_vma;
-	unsigned long ta_start;
-	unsigned long ta_end;
-};
-
-static inline void ipi_flush_tlb_all(void *ignored)
-{
-	local_flush_tlb_all();
-}
-
-static inline void ipi_flush_tlb_mm(void *arg)
-{
-	struct mm_struct *mm = (struct mm_struct *)arg;
-
-	local_flush_tlb_mm(mm);
-}
-
-static inline void ipi_flush_tlb_page(void *arg)
-{
-	struct tlb_args *ta = (struct tlb_args *)arg;
-
-	local_flush_tlb_page(ta->ta_vma, ta->ta_start);
-}
-
-static inline void ipi_flush_tlb_kernel_page(void *arg)
-{
-	struct tlb_args *ta = (struct tlb_args *)arg;
-
-	local_flush_tlb_kernel_page(ta->ta_start);
-}
-
-static inline void ipi_flush_tlb_range(void *arg)
-{
-	struct tlb_args *ta = (struct tlb_args *)arg;
-
-	local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
-}
-
-static inline void ipi_flush_tlb_kernel_range(void *arg)
-{
-	struct tlb_args *ta = (struct tlb_args *)arg;
-
-	local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end);
-}
-
-void flush_tlb_all(void)
-{
-	if (tlb_ops_need_broadcast())
-		on_each_cpu(ipi_flush_tlb_all, NULL, 1);
-	else
-		local_flush_tlb_all();
-}
-
-void flush_tlb_mm(struct mm_struct *mm)
-{
-	if (tlb_ops_need_broadcast())
-		on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mm_cpumask(mm));
-	else
-		local_flush_tlb_mm(mm);
-}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
-{
-	if (tlb_ops_need_broadcast()) {
-		struct tlb_args ta;
-		ta.ta_vma = vma;
-		ta.ta_start = uaddr;
-		on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mm_cpumask(vma->vm_mm));
-	} else
-		local_flush_tlb_page(vma, uaddr);
-}
-
-void flush_tlb_kernel_page(unsigned long kaddr)
-{
-	if (tlb_ops_need_broadcast()) {
-		struct tlb_args ta;
-		ta.ta_start = kaddr;
-		on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
-	} else
-		local_flush_tlb_kernel_page(kaddr);
-}
-
-void flush_tlb_range(struct vm_area_struct *vma,
-                     unsigned long start, unsigned long end)
-{
-	if (tlb_ops_need_broadcast()) {
-		struct tlb_args ta;
-		ta.ta_vma = vma;
-		ta.ta_start = start;
-		ta.ta_end = end;
-		on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mm_cpumask(vma->vm_mm));
-	} else
-		local_flush_tlb_range(vma, start, end);
-}
-
-void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
-	if (tlb_ops_need_broadcast()) {
-		struct tlb_args ta;
-		ta.ta_start = start;
-		ta.ta_end = end;
-		on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
-	} else
-		local_flush_tlb_kernel_range(start, end);
-}
diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c
new file mode 100644
index 000000000000..7dcb35285be7
--- /dev/null
+++ b/arch/arm/kernel/smp_tlb.c
@@ -0,0 +1,139 @@
+/*
+ *  linux/arch/arm/kernel/smp_tlb.c
+ *
+ *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/preempt.h>
+#include <linux/smp.h>
+
+#include <asm/smp_plat.h>
+#include <asm/tlbflush.h>
+
+static void on_each_cpu_mask(void (*func)(void *), void *info, int wait,
+	const struct cpumask *mask)
+{
+	preempt_disable();
+
+	smp_call_function_many(mask, func, info, wait);
+	if (cpumask_test_cpu(smp_processor_id(), mask))
+		func(info);
+
+	preempt_enable();
+}
+
+/**********************************************************************/
+
+/*
+ * TLB operations
+ */
+struct tlb_args {
+	struct vm_area_struct *ta_vma;
+	unsigned long ta_start;
+	unsigned long ta_end;
+};
+
+static inline void ipi_flush_tlb_all(void *ignored)
+{
+	local_flush_tlb_all();
+}
+
+static inline void ipi_flush_tlb_mm(void *arg)
+{
+	struct mm_struct *mm = (struct mm_struct *)arg;
+
+	local_flush_tlb_mm(mm);
+}
+
+static inline void ipi_flush_tlb_page(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_page(ta->ta_vma, ta->ta_start);
+}
+
+static inline void ipi_flush_tlb_kernel_page(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_kernel_page(ta->ta_start);
+}
+
+static inline void ipi_flush_tlb_range(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
+}
+
+static inline void ipi_flush_tlb_kernel_range(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end);
+}
+
+void flush_tlb_all(void)
+{
+	if (tlb_ops_need_broadcast())
+		on_each_cpu(ipi_flush_tlb_all, NULL, 1);
+	else
+		local_flush_tlb_all();
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+	if (tlb_ops_need_broadcast())
+		on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mm_cpumask(mm));
+	else
+		local_flush_tlb_mm(mm);
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_vma = vma;
+		ta.ta_start = uaddr;
+		on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mm_cpumask(vma->vm_mm));
+	} else
+		local_flush_tlb_page(vma, uaddr);
+}
+
+void flush_tlb_kernel_page(unsigned long kaddr)
+{
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_start = kaddr;
+		on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
+	} else
+		local_flush_tlb_kernel_page(kaddr);
+}
+
+void flush_tlb_range(struct vm_area_struct *vma,
+                     unsigned long start, unsigned long end)
+{
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_vma = vma;
+		ta.ta_start = start;
+		ta.ta_end = end;
+		on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mm_cpumask(vma->vm_mm));
+	} else
+		local_flush_tlb_range(vma, start, end);
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_start = start;
+		ta.ta_end = end;
+		on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
+	} else
+		local_flush_tlb_kernel_range(start, end);
+}
+

From faabfa0816916b0a7cfc93f6a9be382830658c80 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 20 Dec 2010 16:58:19 +0000
Subject: [PATCH 1064/1066] ARM: SMP: ensure frame pointer is reinitialized for
 soft-CPU hotplug

When we soft-CPU hotplug a CPU, we reset the stack pointer and
jump back to start_secondary().  This allows us to restart as if
the CPU was actually reset.

However, we weren't resetting the frame pointer, which could cause
problems with backtracing.  Reset the frame pointer to zero (which
means no parent frame) just like the early assembly code also does.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/smp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 6d0c66bc434d..5341b0b19701 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -286,6 +286,7 @@ void __ref cpu_die(void)
 	 * to be repeated to undo the effects of taking the CPU offline.
 	 */
 	__asm__("mov	sp, %0\n"
+	"	mov	fp, #0\n"
 	"	b	secondary_start_kernel"
 		:
 		: "r" (task_stack_page(current) + THREAD_SIZE - 8));

From 78368c79944b12f91bcacb0b0b030c36016264e8 Mon Sep 17 00:00:00 2001
From: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Date: Wed, 22 Dec 2010 13:18:58 +0100
Subject: [PATCH 1065/1066] ARM: 6539/1: ux500: remove unnecessary barrier from
 the secondary startup

Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ux500/headsmp.S | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S
index a6be2cdf2b2f..64fa451edcfd 100644
--- a/arch/arm/mach-ux500/headsmp.S
+++ b/arch/arm/mach-ux500/headsmp.S
@@ -23,7 +23,6 @@ ENTRY(u8500_secondary_startup)
 	ldmia	r4, {r5, r6}
 	sub	r4, r4, r5
 	add	r6, r6, r4
-	dsb
 pen:	ldr	r7, [r6]
 	cmp	r7, r0
 	bne	pen

From 15095bb0fe779c0403091bda7adce5fb3bb9ca35 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 2 Jan 2011 15:05:21 +0000
Subject: [PATCH 1066/1066] ARM: TWD: enable one-shot mode

Allow one shot timer mode to be used with the TWD.  This allows
NOHZ mode to be used on SMP systems using the TWD localtimer.

Tested on Versatile Express and U8500.

Tested-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 290a4b57617f..15a177573b74 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1248,6 +1248,7 @@ config HAVE_ARM_SCU
 config HAVE_ARM_TWD
 	bool
 	depends on SMP
+	select TICK_ONESHOT
 	help
 	  This options enables support for the ARM timer and watchdog unit