Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-04 01:51:34 +00:00
Code Issues Packages Projects Releases Wiki Activity

rtw88: 8723d: Add mac power-on/-off function

Browse Source 
The mac power-on flow consists of three steps:
1. pre_sys_cfg  (Before switching power state)
2. power_switch (Switching power state)
3. init_sys_cfg (Settings after swtiching power state)

When switching power state, driver will load and parse the power sequence
tables. For 8723D devices, the logics for parsing are most same except for
the polling function. 8723D devices need to toggle BIT_PFM_WOWL twice.

The settings after power state is switched for 8723D devices are quite
different with other devices, extract a legacy function for them.

For power-off flow, 8723D devices have the same logic with existing chips.
But warning printed if we run power-off sequence in power-off state:

   rtw_pci 0000:03:00.0: failed to poll offset=0x5f8 mask=0xff value=0x0

The scenario is user do 'ifconfig up' that will run power-on sequence to
bring up and then run power-off sequence to enter idle
(IEEE80211_CONF_IDLE). Then, user do 'ifconfig down' that will run
power-off sequence again, and the warning is shown. Original code check
power-on state to avoid to run power-on sequence twice, and this commit
extends to check both power-on and power-off states.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200422034607.28747-4-yhchuang@realtek.com
This commit is contained in:
Ping-Ke Shih 2020-04-22 11:46:02 +08:00 committed by Kalle Valo
parent e5f57ad06a
commit 4e223a5f53
2 changed files with 61 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

60
drivers/net/wireless/realtek/rtw88/mac.c
View File

@ -61,6 +61,14 @@ static int rtw_mac_pre_system_cfg(struct rtw_dev *rtwdev)
rtw_write8(rtwdev, REG_RSV_CTRL, 0);
if (rtw_chip_wcpu_11n(rtwdev)) {
if (rtw_read32(rtwdev, REG_SYS_CFG1) & BIT_LDO)
rtw_write8(rtwdev, REG_LDO_SWR_CTRL, LDO_SEL);
else
rtw_write8(rtwdev, REG_LDO_SWR_CTRL, SPS_SEL);
return 0;
}
switch (rtw_hci_type(rtwdev)) {
case RTW_HCI_TYPE_PCIE:
rtw_write32_set(rtwdev, REG_HCI_OPT_CTRL, BIT_BT_DIG_CLK_EN);
@ -123,10 +131,19 @@ static int rtw_pwr_cmd_polling(struct rtw_dev *rtwdev,
if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_PCIE &&
flag == 0) {
value = rtw_read8(rtwdev, REG_SYS_PW_CTRL);
value |= BIT(3);
if (rtwdev->chip->id == RTW_CHIP_TYPE_8723D) {
value &= ~BIT_PFM_WOWL;
rtw_write8(rtwdev, REG_SYS_PW_CTRL, value);
}
value |= BIT_PFM_WOWL;
rtw_write8(rtwdev, REG_SYS_PW_CTRL, value);
value &= ~BIT(3);
value &= ~BIT_PFM_WOWL;
rtw_write8(rtwdev, REG_SYS_PW_CTRL, value);
if (rtwdev->chip->id == RTW_CHIP_TYPE_8723D) {
value |= BIT_PFM_WOWL;
rtw_write8(rtwdev, REG_SYS_PW_CTRL, value);
}
cnt = RTW_PWR_POLLING_CNT;
flag = 1;
} else {
@ -228,12 +245,14 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on)
u8 rpwm;
bool cur_pwr;
rpwm = rtw_read8(rtwdev, rtwdev->hci.rpwm_addr);
if (rtw_chip_wcpu_11ac(rtwdev)) {
rpwm = rtw_read8(rtwdev, rtwdev->hci.rpwm_addr);
/* Check FW still exist or not */
if (rtw_read16(rtwdev, REG_MCUFW_CTRL) == 0xC078) {
rpwm = (rpwm ^ BIT_RPWM_TOGGLE) & BIT_RPWM_TOGGLE;
rtw_write8(rtwdev, rtwdev->hci.rpwm_addr, rpwm);
/* Check FW still exist or not */
if (rtw_read16(rtwdev, REG_MCUFW_CTRL) == 0xC078) {
rpwm = (rpwm ^ BIT_RPWM_TOGGLE) & BIT_RPWM_TOGGLE;
rtw_write8(rtwdev, rtwdev->hci.rpwm_addr, rpwm);
}
}
if (rtw_read8(rtwdev, REG_CR) == 0xea)
@ -244,7 +263,7 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on)
else
cur_pwr = true;
if (pwr_on && cur_pwr)
if (pwr_on == cur_pwr)
return -EALREADY;
pwr_seq = pwr_on ? chip->pwr_on_seq : chip->pwr_off_seq;
@ -254,7 +273,7 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on)
return 0;
}
static int rtw_mac_init_system_cfg(struct rtw_dev *rtwdev)
static int __rtw_mac_init_system_cfg(struct rtw_dev *rtwdev)
{
u8 sys_func_en = rtwdev->chip->sys_func_en;
u8 value8;
@ -279,6 +298,29 @@ static int rtw_mac_init_system_cfg(struct rtw_dev *rtwdev)
return 0;
}
static int __rtw_mac_init_system_cfg_legacy(struct rtw_dev *rtwdev)
{
rtw_write8(rtwdev, REG_CR, 0xff);
mdelay(2);
rtw_write8(rtwdev, REG_HWSEQ_CTRL, 0x7f);
mdelay(2);
rtw_write8_set(rtwdev, REG_SYS_CLKR, BIT_WAKEPAD_EN);
rtw_write16_clr(rtwdev, REG_GPIO_MUXCFG, BIT_EN_SIC);
rtw_write16(rtwdev, REG_CR, 0x2ff);
return 0;
}
static int rtw_mac_init_system_cfg(struct rtw_dev *rtwdev)
{
if (rtw_chip_wcpu_11n(rtwdev))
return __rtw_mac_init_system_cfg_legacy(rtwdev);
return __rtw_mac_init_system_cfg(rtwdev);
}
int rtw_mac_power_on(struct rtw_dev *rtwdev)
{
int ret = 0;

10
drivers/net/wireless/realtek/rtw88/reg.h
View File

@ -13,11 +13,13 @@
#define BIT_R_DIS_PRST BIT(6)
#define BIT_WLOCK_1C_B6 BIT(5)
#define REG_SYS_PW_CTRL 0x0004
#define BIT_PFM_WOWL BIT(3)
#define REG_SYS_CLK_CTRL 0x0008
#define BIT_CPU_CLK_EN BIT(14)
#define REG_SYS_CLKR 0x0008
#define BIT_ANA8M BIT(1)
#define BIT_WAKEPAD_EN BIT(3)
#define BIT_LOADER_CLK_EN BIT(5)
#define REG_RSV_CTRL 0x001C
@ -49,6 +51,7 @@
#define REG_GPIO_MUXCFG 0x0040
#define BIT_FSPI_EN BIT(19)
#define BIT_EN_SIC BIT(12)
#define BIT_BT_AOD_GPIO3 BIT(9)
#define BIT_BT_PTA_EN BIT(5)
#define BIT_WLRFE_4_5_EN BIT(2)
@ -73,6 +76,10 @@
#define BIT_LTE_MUX_CTRL_PATH BIT(26)
#define REG_HCI_OPT_CTRL 0x0074
#define REG_LDO_SWR_CTRL 0x007C
#define LDO_SEL 0xC3
#define SPS_SEL 0x83
#define REG_MCUFW_CTRL 0x0080
#define BIT_ANA_PORT_EN BIT(22)
#define BIT_MAC_PORT_EN BIT(21)
@ -110,6 +117,7 @@
#define BIT_BT_INT_EN BIT(15)
#define REG_SYS_CFG1 0x00F0
#define BIT_RTL_ID BIT(23)
#define BIT_LDO BIT(24)
#define BIT_RF_TYPE_ID BIT(27)
#define BIT_SHIFT_VENDOR_ID 16
#define BIT_MASK_VENDOR_ID 0xf
@ -238,6 +246,8 @@
#define REG_FWHW_TXQ_CTRL 0x0420
#define BIT_EN_BCNQ_DL BIT(22)
#define BIT_EN_WR_FREE_TAIL BIT(20)
#define REG_HWSEQ_CTRL 0x0423
#define REG_BCNQ_BDNY_V1 0x0424
#define REG_LIFETIME_EN 0x0426
#define BIT_BA_PARSER_EN BIT(5)