mirror of
https://github.com/torvalds/linux.git
synced 2024-11-22 04:02:20 +00:00
drm/mipi-dbi: Add support for DRM_FORMAT_RGB888
DRM_FORMAT_RGB888 is 24 bits per pixel and it would be natural to send it on the SPI bus using a 24 bits per word transfer. The problem with this is that not all SPI controllers support 24 bpw. Since DRM_FORMAT_RGB888 is stored in memory as little endian and the SPI bus is big endian we use 8 bpw to always get the same pixel format on the bus: b8g8r8. The MIPI DCS specification lists the standard commands that can be sent over the MIPI DBI interface. The set_address_mode (36h) command has one bit in the parameter that controls RGB/BGR order. This means that the controller can be configured to receive the pixel as BGR. RGB888 is rarely supported on these controllers but RGB666 is very common. All datasheets I have seen do at least support the pixel format option where each color is sent as one byte and the 6 MSB's are used. All this put together means that we can send each pixel as b8g8r8 and an RGB666 capable controller sees this as b6x2g6x2r6x2. v4: - s/emulation_format/pixel_format/ (Dmitry) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240604-panel-mipi-dbi-rgb666-v4-4-d7c2bcb9b78d@tronnes.org Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
This commit is contained in:
parent
df3fb27a74
commit
4aebb79021
@ -206,6 +206,7 @@ int mipi_dbi_buf_copy(void *dst, struct iosys_map *src, struct drm_framebuffer *
|
||||
struct drm_rect *clip, bool swap,
|
||||
struct drm_format_conv_state *fmtcnv_state)
|
||||
{
|
||||
struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(fb->dev);
|
||||
struct drm_gem_object *gem = drm_gem_fb_get_obj(fb, 0);
|
||||
struct iosys_map dst_map = IOSYS_MAP_INIT_VADDR(dst);
|
||||
int ret;
|
||||
@ -222,9 +223,19 @@ int mipi_dbi_buf_copy(void *dst, struct iosys_map *src, struct drm_framebuffer *
|
||||
else
|
||||
drm_fb_memcpy(&dst_map, NULL, src, fb, clip);
|
||||
break;
|
||||
case DRM_FORMAT_RGB888:
|
||||
drm_fb_memcpy(&dst_map, NULL, src, fb, clip);
|
||||
break;
|
||||
case DRM_FORMAT_XRGB8888:
|
||||
switch (dbidev->pixel_format) {
|
||||
case DRM_FORMAT_RGB565:
|
||||
drm_fb_xrgb8888_to_rgb565(&dst_map, NULL, src, fb, clip, fmtcnv_state, swap);
|
||||
break;
|
||||
case DRM_FORMAT_RGB888:
|
||||
drm_fb_xrgb8888_to_rgb888(&dst_map, NULL, src, fb, clip, fmtcnv_state);
|
||||
break;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
drm_err_once(fb->dev, "Format is not supported: %p4cc\n",
|
||||
&fb->format->format);
|
||||
@ -260,9 +271,11 @@ static void mipi_dbi_fb_dirty(struct iosys_map *src, struct drm_framebuffer *fb,
|
||||
struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(fb->dev);
|
||||
unsigned int height = rect->y2 - rect->y1;
|
||||
unsigned int width = rect->x2 - rect->x1;
|
||||
const struct drm_format_info *dst_format;
|
||||
struct mipi_dbi *dbi = &dbidev->dbi;
|
||||
bool swap = dbi->swap_bytes;
|
||||
int ret = 0;
|
||||
size_t len;
|
||||
bool full;
|
||||
void *tr;
|
||||
|
||||
@ -283,8 +296,13 @@ static void mipi_dbi_fb_dirty(struct iosys_map *src, struct drm_framebuffer *fb,
|
||||
mipi_dbi_set_window_address(dbidev, rect->x1, rect->x2 - 1, rect->y1,
|
||||
rect->y2 - 1);
|
||||
|
||||
ret = mipi_dbi_command_buf(dbi, MIPI_DCS_WRITE_MEMORY_START, tr,
|
||||
width * height * 2);
|
||||
if (fb->format->format == DRM_FORMAT_XRGB8888)
|
||||
dst_format = drm_format_info(dbidev->pixel_format);
|
||||
else
|
||||
dst_format = fb->format;
|
||||
len = drm_format_info_min_pitch(dst_format, 0, width) * height;
|
||||
|
||||
ret = mipi_dbi_command_buf(dbi, MIPI_DCS_WRITE_MEMORY_START, tr, len);
|
||||
err_msg:
|
||||
if (ret)
|
||||
drm_err_once(fb->dev, "Failed to update display %d\n", ret);
|
||||
@ -572,7 +590,7 @@ static const uint32_t mipi_dbi_formats[] = {
|
||||
* has one fixed &drm_display_mode which is rotated according to @rotation.
|
||||
* This mode is used to set the mode config min/max width/height properties.
|
||||
*
|
||||
* Use mipi_dbi_dev_init() if you don't need custom formats.
|
||||
* Use mipi_dbi_dev_init() if you want native RGB565 and emulated XRGB8888 format.
|
||||
*
|
||||
* Note:
|
||||
* Some of the helper functions expects RGB565 to be the default format and the
|
||||
@ -631,6 +649,9 @@ int mipi_dbi_dev_init_with_formats(struct mipi_dbi_dev *dbidev,
|
||||
drm->mode_config.min_height = dbidev->mode.vdisplay;
|
||||
drm->mode_config.max_height = dbidev->mode.vdisplay;
|
||||
dbidev->rotation = rotation;
|
||||
dbidev->pixel_format = formats[0];
|
||||
if (formats[0] == DRM_FORMAT_RGB888)
|
||||
dbidev->dbi.write_memory_bpw = 8;
|
||||
|
||||
DRM_DEBUG_KMS("rotation = %u\n", rotation);
|
||||
|
||||
|
@ -101,6 +101,11 @@ struct mipi_dbi_dev {
|
||||
*/
|
||||
struct drm_display_mode mode;
|
||||
|
||||
/**
|
||||
* @pixel_format: Native pixel format (DRM_FORMAT\_\*)
|
||||
*/
|
||||
u32 pixel_format;
|
||||
|
||||
/**
|
||||
* @tx_buf: Buffer used for transfer (copy clip rect area)
|
||||
*/
|
||||
|
Loading…
Reference in New Issue
Block a user