Input: usbtouchscreen - reduce number fo be16_to_cpu conversions

Let's perform be16_to_cpu() conversions once for each received packet,
and then use cached values. Makes code a little bit easier to follow.

Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This commit is contained in:
Dmitry Torokhov 2010-06-08 01:01:46 -07:00
parent 8bf2269fc0
commit 4aa5bbeca0

View File

@ -849,29 +849,32 @@ static void nexio_exit(struct usbtouch_usb *usbtouch)
static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt)
{
int x, y, begin_x, begin_y, end_x, end_y, w, h, ret;
struct nexio_touch_packet *packet = (void *) pkt;
struct nexio_priv *priv = usbtouch->priv;
unsigned int data_len = be16_to_cpu(packet->data_len);
unsigned int x_len = be16_to_cpu(packet->x_len);
unsigned int y_len = be16_to_cpu(packet->y_len);
int x, y, begin_x, begin_y, end_x, end_y, w, h, ret;
/* got touch data? */
if ((pkt[0] & 0xe0) != 0xe0)
return 0;
if (be16_to_cpu(packet->data_len) > 0xff)
packet->data_len = cpu_to_be16(be16_to_cpu(packet->data_len) - 0x100);
if (be16_to_cpu(packet->x_len) > 0xff)
packet->x_len = cpu_to_be16(be16_to_cpu(packet->x_len) - 0x80);
if (data_len > 0xff)
data_len -= 0x100;
if (x_len > 0xff)
x_len -= 0x80;
/* send ACK */
ret = usb_submit_urb(priv->ack, GFP_ATOMIC);
if (!usbtouch->type->max_xc) {
usbtouch->type->max_xc = 2 * be16_to_cpu(packet->x_len);
input_set_abs_params(usbtouch->input, ABS_X, 0,
2 * be16_to_cpu(packet->x_len), 0, 0);
usbtouch->type->max_yc = 2 * be16_to_cpu(packet->y_len);
input_set_abs_params(usbtouch->input, ABS_Y, 0,
2 * be16_to_cpu(packet->y_len), 0, 0);
usbtouch->type->max_xc = 2 * x_len;
input_set_abs_params(usbtouch->input, ABS_X,
0, usbtouch->type->max_xc, 0, 0);
usbtouch->type->max_yc = 2 * y_len;
input_set_abs_params(usbtouch->input, ABS_Y,
0, usbtouch->type->max_yc, 0, 0);
}
/*
* The device reports state of IR sensors on X and Y axes.
@ -881,22 +884,21 @@ static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt)
* it's disabled (and untested) here as there's no X driver for that.
*/
begin_x = end_x = begin_y = end_y = -1;
for (x = 0; x < be16_to_cpu(packet->x_len); x++) {
for (x = 0; x < x_len; x++) {
if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) {
begin_x = x;
continue;
}
if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) {
end_x = x - 1;
for (y = be16_to_cpu(packet->x_len);
y < be16_to_cpu(packet->data_len); y++) {
for (y = x_len; y < data_len; y++) {
if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) {
begin_y = y - be16_to_cpu(packet->x_len);
begin_y = y - x_len;
continue;
}
if (end_y == -1 &&
begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) {
end_y = y - 1 - be16_to_cpu(packet->x_len);
end_y = y - 1 - x_len;
w = end_x - begin_x;
h = end_y - begin_y;
#if 0