Merge branch 'net-dsa-convert-two-drivers-to-phylink_generic_validate'

Russell King says:

====================
net: dsa: convert two drivers to phylink_generic_validate()

Patches 1 to 3 update core DSA code to allow drivers to be converted,
and patches 4 and 5 convert hellcreek and lantiq to use this (both of
which received reviewed-by from their maintainers.) As the rest have
yet to be reviewed by their maintainers, they are not included here.

Patch 1 had a request to change the formatting of it; I have not done
so as I believe a patch should do one change and one change only -
reformatting it is a separate change that should be in its own patch.
However, as patch 2 gets rid of the reason for reformatting it, it
would be pointless, and pure noise to include such an intermediary
patch.

Instead, I have swapped the order of patches 2 and 3 from the RFC
series.
====================

Link: https://lore.kernel.org/r/YaYiiU9nvmVugqnJ@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is contained in:
Jakub Kicinski 2021-12-01 18:58:03 -08:00
commit 4a8e4640dd
6 changed files with 88 additions and 129 deletions

View File

@ -1384,14 +1384,19 @@ static void hellcreek_teardown(struct dsa_switch *ds)
dsa_devlink_resources_unregister(ds);
}
static void hellcreek_phylink_validate(struct dsa_switch *ds, int port,
unsigned long *supported,
struct phylink_link_state *state)
static void hellcreek_phylink_get_caps(struct dsa_switch *ds, int port,
struct phylink_config *config)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
struct hellcreek *hellcreek = ds->priv;
dev_dbg(hellcreek->dev, "Phylink validate for port %d\n", port);
__set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_RGMII, config->supported_interfaces);
/* Include GMII - the hardware does not support this interface
* mode, but it's the default interface mode for phylib, so we
* need it for compatibility with existing DT.
*/
__set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces);
/* The MAC settings are a hardware configuration option and cannot be
* changed at run time or by strapping. Therefore the attached PHYs
@ -1399,12 +1404,9 @@ static void hellcreek_phylink_validate(struct dsa_switch *ds, int port,
* by the hardware.
*/
if (hellcreek->pdata->is_100_mbits)
phylink_set(mask, 100baseT_Full);
config->mac_capabilities = MAC_100FD;
else
phylink_set(mask, 1000baseT_Full);
linkmode_and(supported, supported, mask);
linkmode_and(state->advertising, state->advertising, mask);
config->mac_capabilities = MAC_1000FD;
}
static int
@ -1755,7 +1757,7 @@ static const struct dsa_switch_ops hellcreek_ds_ops = {
.get_strings = hellcreek_get_strings,
.get_tag_protocol = hellcreek_get_tag_protocol,
.get_ts_info = hellcreek_get_ts_info,
.phylink_validate = hellcreek_phylink_validate,
.phylink_get_caps = hellcreek_phylink_get_caps,
.port_bridge_flags = hellcreek_bridge_flags,
.port_bridge_join = hellcreek_port_bridge_join,
.port_bridge_leave = hellcreek_port_bridge_leave,

View File

@ -1438,114 +1438,70 @@ static int gswip_port_fdb_dump(struct dsa_switch *ds, int port,
return 0;
}
static void gswip_phylink_set_capab(unsigned long *supported,
struct phylink_link_state *state)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
/* Allow all the expected bits */
phylink_set(mask, Autoneg);
phylink_set_port_modes(mask);
phylink_set(mask, Pause);
phylink_set(mask, Asym_Pause);
/* With the exclusion of MII, Reverse MII and Reduced MII, we
* support Gigabit, including Half duplex
*/
if (state->interface != PHY_INTERFACE_MODE_MII &&
state->interface != PHY_INTERFACE_MODE_REVMII &&
state->interface != PHY_INTERFACE_MODE_RMII) {
phylink_set(mask, 1000baseT_Full);
phylink_set(mask, 1000baseT_Half);
}
phylink_set(mask, 10baseT_Half);
phylink_set(mask, 10baseT_Full);
phylink_set(mask, 100baseT_Half);
phylink_set(mask, 100baseT_Full);
linkmode_and(supported, supported, mask);
linkmode_and(state->advertising, state->advertising, mask);
}
static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port,
unsigned long *supported,
struct phylink_link_state *state)
static void gswip_xrx200_phylink_get_caps(struct dsa_switch *ds, int port,
struct phylink_config *config)
{
switch (port) {
case 0:
case 1:
if (!phy_interface_mode_is_rgmii(state->interface) &&
state->interface != PHY_INTERFACE_MODE_MII &&
state->interface != PHY_INTERFACE_MODE_REVMII &&
state->interface != PHY_INTERFACE_MODE_RMII)
goto unsupported;
phy_interface_set_rgmii(config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_MII,
config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_REVMII,
config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_RMII,
config->supported_interfaces);
break;
case 2:
case 3:
case 4:
if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
goto unsupported;
__set_bit(PHY_INTERFACE_MODE_INTERNAL,
config->supported_interfaces);
break;
case 5:
if (!phy_interface_mode_is_rgmii(state->interface) &&
state->interface != PHY_INTERFACE_MODE_INTERNAL)
goto unsupported;
phy_interface_set_rgmii(config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_INTERNAL,
config->supported_interfaces);
break;
default:
linkmode_zero(supported);
dev_err(ds->dev, "Unsupported port: %i\n", port);
return;
}
gswip_phylink_set_capab(supported, state);
return;
unsupported:
linkmode_zero(supported);
dev_err(ds->dev, "Unsupported interface '%s' for port %d\n",
phy_modes(state->interface), port);
config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000;
}
static void gswip_xrx300_phylink_validate(struct dsa_switch *ds, int port,
unsigned long *supported,
struct phylink_link_state *state)
static void gswip_xrx300_phylink_get_caps(struct dsa_switch *ds, int port,
struct phylink_config *config)
{
switch (port) {
case 0:
if (!phy_interface_mode_is_rgmii(state->interface) &&
state->interface != PHY_INTERFACE_MODE_GMII &&
state->interface != PHY_INTERFACE_MODE_RMII)
goto unsupported;
phy_interface_set_rgmii(config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_GMII,
config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_RMII,
config->supported_interfaces);
break;
case 1:
case 2:
case 3:
case 4:
if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
goto unsupported;
__set_bit(PHY_INTERFACE_MODE_INTERNAL,
config->supported_interfaces);
break;
case 5:
if (!phy_interface_mode_is_rgmii(state->interface) &&
state->interface != PHY_INTERFACE_MODE_INTERNAL &&
state->interface != PHY_INTERFACE_MODE_RMII)
goto unsupported;
phy_interface_set_rgmii(config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_INTERNAL,
config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_RMII,
config->supported_interfaces);
break;
default:
linkmode_zero(supported);
dev_err(ds->dev, "Unsupported port: %i\n", port);
return;
}
gswip_phylink_set_capab(supported, state);
return;
unsupported:
linkmode_zero(supported);
dev_err(ds->dev, "Unsupported interface '%s' for port %d\n",
phy_modes(state->interface), port);
config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000;
}
static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link)
@ -1827,7 +1783,7 @@ static const struct dsa_switch_ops gswip_xrx200_switch_ops = {
.port_fdb_add = gswip_port_fdb_add,
.port_fdb_del = gswip_port_fdb_del,
.port_fdb_dump = gswip_port_fdb_dump,
.phylink_validate = gswip_xrx200_phylink_validate,
.phylink_get_caps = gswip_xrx200_phylink_get_caps,
.phylink_mac_config = gswip_phylink_mac_config,
.phylink_mac_link_down = gswip_phylink_mac_link_down,
.phylink_mac_link_up = gswip_phylink_mac_link_up,
@ -1851,7 +1807,7 @@ static const struct dsa_switch_ops gswip_xrx300_switch_ops = {
.port_fdb_add = gswip_port_fdb_add,
.port_fdb_del = gswip_port_fdb_del,
.port_fdb_dump = gswip_port_fdb_dump,
.phylink_validate = gswip_xrx300_phylink_validate,
.phylink_get_caps = gswip_xrx300_phylink_get_caps,
.phylink_mac_config = gswip_phylink_mac_config,
.phylink_mac_link_down = gswip_phylink_mac_link_down,
.phylink_mac_link_up = gswip_phylink_mac_link_up,

View File

@ -645,8 +645,8 @@ struct dsa_switch_ops {
/*
* PHYLINK integration
*/
void (*phylink_get_interfaces)(struct dsa_switch *ds, int port,
unsigned long *supported_interfaces);
void (*phylink_get_caps)(struct dsa_switch *ds, int port,
struct phylink_config *config);
void (*phylink_validate)(struct dsa_switch *ds, int port,
unsigned long *supported,
struct phylink_link_state *state);

View File

@ -258,13 +258,13 @@ int dsa_port_mrp_add_ring_role(const struct dsa_port *dp,
const struct switchdev_obj_ring_role_mrp *mrp);
int dsa_port_mrp_del_ring_role(const struct dsa_port *dp,
const struct switchdev_obj_ring_role_mrp *mrp);
int dsa_port_phylink_create(struct dsa_port *dp);
int dsa_port_link_register_of(struct dsa_port *dp);
void dsa_port_link_unregister_of(struct dsa_port *dp);
int dsa_port_hsr_join(struct dsa_port *dp, struct net_device *hsr);
void dsa_port_hsr_leave(struct dsa_port *dp, struct net_device *hsr);
int dsa_port_tag_8021q_vlan_add(struct dsa_port *dp, u16 vid, bool broadcast);
void dsa_port_tag_8021q_vlan_del(struct dsa_port *dp, u16 vid, bool broadcast);
extern const struct phylink_mac_ops dsa_port_phylink_mac_ops;
static inline bool dsa_port_offloads_bridge_port(struct dsa_port *dp,
const struct net_device *dev)

View File

@ -981,8 +981,11 @@ static void dsa_port_phylink_validate(struct phylink_config *config,
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
struct dsa_switch *ds = dp->ds;
if (!ds->ops->phylink_validate)
if (!ds->ops->phylink_validate) {
if (config->mac_capabilities)
phylink_generic_validate(config, supported, state);
return;
}
ds->ops->phylink_validate(ds, dp->index, supported, state);
}
@ -1072,7 +1075,7 @@ static void dsa_port_phylink_mac_link_up(struct phylink_config *config,
speed, duplex, tx_pause, rx_pause);
}
const struct phylink_mac_ops dsa_port_phylink_mac_ops = {
static const struct phylink_mac_ops dsa_port_phylink_mac_ops = {
.validate = dsa_port_phylink_validate,
.mac_pcs_get_state = dsa_port_phylink_mac_pcs_get_state,
.mac_config = dsa_port_phylink_mac_config,
@ -1081,6 +1084,29 @@ const struct phylink_mac_ops dsa_port_phylink_mac_ops = {
.mac_link_up = dsa_port_phylink_mac_link_up,
};
int dsa_port_phylink_create(struct dsa_port *dp)
{
struct dsa_switch *ds = dp->ds;
phy_interface_t mode;
int err;
err = of_get_phy_mode(dp->dn, &mode);
if (err)
mode = PHY_INTERFACE_MODE_NA;
if (ds->ops->phylink_get_caps)
ds->ops->phylink_get_caps(ds, dp->index, &dp->pl_config);
dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(dp->dn),
mode, &dsa_port_phylink_mac_ops);
if (IS_ERR(dp->pl)) {
pr_err("error creating PHYLINK: %ld\n", PTR_ERR(dp->pl));
return PTR_ERR(dp->pl);
}
return 0;
}
static int dsa_port_setup_phy_of(struct dsa_port *dp, bool enable)
{
struct dsa_switch *ds = dp->ds;
@ -1157,27 +1183,15 @@ static int dsa_port_phylink_register(struct dsa_port *dp)
{
struct dsa_switch *ds = dp->ds;
struct device_node *port_dn = dp->dn;
phy_interface_t mode;
int err;
err = of_get_phy_mode(port_dn, &mode);
if (err)
mode = PHY_INTERFACE_MODE_NA;
dp->pl_config.dev = ds->dev;
dp->pl_config.type = PHYLINK_DEV;
dp->pl_config.pcs_poll = ds->pcs_poll;
if (ds->ops->phylink_get_interfaces)
ds->ops->phylink_get_interfaces(ds, dp->index,
dp->pl_config.supported_interfaces);
dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(port_dn),
mode, &dsa_port_phylink_mac_ops);
if (IS_ERR(dp->pl)) {
pr_err("error creating PHYLINK: %ld\n", PTR_ERR(dp->pl));
return PTR_ERR(dp->pl);
}
err = dsa_port_phylink_create(dp);
if (err)
return err;
err = phylink_of_phy_connect(dp->pl, port_dn, 0);
if (err && err != -ENODEV) {

View File

@ -1851,14 +1851,9 @@ static int dsa_slave_phy_setup(struct net_device *slave_dev)
struct dsa_port *dp = dsa_slave_to_port(slave_dev);
struct device_node *port_dn = dp->dn;
struct dsa_switch *ds = dp->ds;
phy_interface_t mode;
u32 phy_flags = 0;
int ret;
ret = of_get_phy_mode(port_dn, &mode);
if (ret)
mode = PHY_INTERFACE_MODE_NA;
dp->pl_config.dev = &slave_dev->dev;
dp->pl_config.type = PHYLINK_NETDEV;
@ -1871,17 +1866,9 @@ static int dsa_slave_phy_setup(struct net_device *slave_dev)
dp->pl_config.poll_fixed_state = true;
}
if (ds->ops->phylink_get_interfaces)
ds->ops->phylink_get_interfaces(ds, dp->index,
dp->pl_config.supported_interfaces);
dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(port_dn), mode,
&dsa_port_phylink_mac_ops);
if (IS_ERR(dp->pl)) {
netdev_err(slave_dev,
"error creating PHYLINK: %ld\n", PTR_ERR(dp->pl));
return PTR_ERR(dp->pl);
}
ret = dsa_port_phylink_create(dp);
if (ret)
return ret;
if (ds->ops->get_phy_flags)
phy_flags = ds->ops->get_phy_flags(ds, dp->index);