mirror of
https://github.com/torvalds/linux.git
synced 2024-12-11 13:41:55 +00:00
USB: gadget: atmel_usba: add DT support
Allow to compile the driver all the time if AT91 enabled. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Bo Shen <voice.shen@atmel.com>
This commit is contained in:
parent
e8f2ea3932
commit
4a3ae9324e
@ -47,3 +47,85 @@ usb1: gadget@fffa4000 {
|
||||
interrupts = <10 4>;
|
||||
atmel,vbus-gpio = <&pioC 5 0>;
|
||||
};
|
||||
|
||||
Atmel High-Speed USB device controller
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "atmel,at91sam9rl-udc"
|
||||
- reg: Address and length of the register set for the device
|
||||
- interrupts: Should contain usba interrupt
|
||||
- ep childnode: To specify the number of endpoints and their properties.
|
||||
|
||||
Optional properties:
|
||||
- atmel,vbus-gpio: If present, specifies a gpio that needs to be
|
||||
activated for the bus to be powered.
|
||||
|
||||
Required child node properties:
|
||||
- name: Name of the endpoint.
|
||||
- reg: Num of the endpoint.
|
||||
- atmel,fifo-size: Size of the fifo.
|
||||
- atmel,nb-banks: Number of banks.
|
||||
- atmel,can-dma: Boolean to specify if the endpoint support DMA.
|
||||
- atmel,can-isoc: Boolean to specify if the endpoint support ISOC.
|
||||
|
||||
usb2: gadget@fff78000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "atmel,at91sam9rl-udc";
|
||||
reg = <0x00600000 0x80000
|
||||
0xfff78000 0x400>;
|
||||
interrupts = <27 4 0>;
|
||||
atmel,vbus-gpio = <&pioB 19 0>;
|
||||
|
||||
ep0 {
|
||||
reg = <0>;
|
||||
atmel,fifo-size = <64>;
|
||||
atmel,nb-banks = <1>;
|
||||
};
|
||||
|
||||
ep1 {
|
||||
reg = <1>;
|
||||
atmel,fifo-size = <1024>;
|
||||
atmel,nb-banks = <2>;
|
||||
atmel,can-dma;
|
||||
atmel,can-isoc;
|
||||
};
|
||||
|
||||
ep2 {
|
||||
reg = <2>;
|
||||
atmel,fifo-size = <1024>;
|
||||
atmel,nb-banks = <2>;
|
||||
atmel,can-dma;
|
||||
atmel,can-isoc;
|
||||
};
|
||||
|
||||
ep3 {
|
||||
reg = <3>;
|
||||
atmel,fifo-size = <1024>;
|
||||
atmel,nb-banks = <3>;
|
||||
atmel,can-dma;
|
||||
};
|
||||
|
||||
ep4 {
|
||||
reg = <4>;
|
||||
atmel,fifo-size = <1024>;
|
||||
atmel,nb-banks = <3>;
|
||||
atmel,can-dma;
|
||||
};
|
||||
|
||||
ep5 {
|
||||
reg = <5>;
|
||||
atmel,fifo-size = <1024>;
|
||||
atmel,nb-banks = <3>;
|
||||
atmel,can-dma;
|
||||
atmel,can-isoc;
|
||||
};
|
||||
|
||||
ep6 {
|
||||
reg = <6>;
|
||||
atmel,fifo-size = <1024>;
|
||||
atmel,nb-banks = <3>;
|
||||
atmel,can-dma;
|
||||
atmel,can-isoc;
|
||||
};
|
||||
};
|
||||
|
@ -156,7 +156,7 @@ config USB_LPC32XX
|
||||
|
||||
config USB_ATMEL_USBA
|
||||
tristate "Atmel USBA"
|
||||
depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
|
||||
depends on AVR32 || ARCH_AT91
|
||||
help
|
||||
USBA is the integrated high-speed USB Device controller on
|
||||
the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
|
||||
|
@ -22,6 +22,8 @@
|
||||
#include <linux/usb/atmel_usba_udc.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/platform_data/atmel.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_gpio.h>
|
||||
|
||||
#include <asm/gpio.h>
|
||||
|
||||
@ -1828,13 +1830,146 @@ static int atmel_usba_stop(struct usb_gadget *gadget,
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __init usba_udc_probe(struct platform_device *pdev)
|
||||
#ifdef CONFIG_OF
|
||||
static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
|
||||
struct usba_udc *udc)
|
||||
{
|
||||
u32 val;
|
||||
const char *name;
|
||||
enum of_gpio_flags flags;
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
struct device_node *pp;
|
||||
int i, ret;
|
||||
struct usba_ep *eps, *ep;
|
||||
|
||||
udc->num_ep = 0;
|
||||
|
||||
udc->vbus_pin = of_get_named_gpio_flags(np, "atmel,vbus-gpio", 0,
|
||||
&flags);
|
||||
udc->vbus_pin_inverted = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
|
||||
|
||||
pp = NULL;
|
||||
while ((pp = of_get_next_child(np, pp)))
|
||||
udc->num_ep++;
|
||||
|
||||
eps = devm_kzalloc(&pdev->dev, sizeof(struct usba_ep) * udc->num_ep,
|
||||
GFP_KERNEL);
|
||||
if (!eps)
|
||||
return ERR_PTR(-ENOMEM);
|
||||
|
||||
udc->gadget.ep0 = &eps[0].ep;
|
||||
|
||||
INIT_LIST_HEAD(&eps[0].ep.ep_list);
|
||||
|
||||
pp = NULL;
|
||||
i = 0;
|
||||
while ((pp = of_get_next_child(np, pp))) {
|
||||
ep = &eps[i];
|
||||
|
||||
ret = of_property_read_u32(pp, "reg", &val);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "of_probe: reg error(%d)\n", ret);
|
||||
goto err;
|
||||
}
|
||||
ep->index = val;
|
||||
|
||||
ret = of_property_read_u32(pp, "atmel,fifo-size", &val);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "of_probe: fifo-size error(%d)\n", ret);
|
||||
goto err;
|
||||
}
|
||||
ep->fifo_size = val;
|
||||
|
||||
ret = of_property_read_u32(pp, "atmel,nb-banks", &val);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "of_probe: nb-banks error(%d)\n", ret);
|
||||
goto err;
|
||||
}
|
||||
ep->nr_banks = val;
|
||||
|
||||
ep->can_dma = of_property_read_bool(pp, "atmel,can-dma");
|
||||
ep->can_isoc = of_property_read_bool(pp, "atmel,can-isoc");
|
||||
|
||||
ret = of_property_read_string(pp, "name", &name);
|
||||
ep->ep.name = name;
|
||||
|
||||
ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
|
||||
ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
|
||||
ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
|
||||
ep->ep.ops = &usba_ep_ops;
|
||||
ep->ep.maxpacket = ep->fifo_size;
|
||||
ep->udc = udc;
|
||||
INIT_LIST_HEAD(&ep->queue);
|
||||
|
||||
if (i)
|
||||
list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
|
||||
|
||||
i++;
|
||||
}
|
||||
|
||||
return eps;
|
||||
err:
|
||||
return ERR_PTR(ret);
|
||||
}
|
||||
#else
|
||||
static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
|
||||
struct usba_udc *udc)
|
||||
{
|
||||
return ERR_PTR(-ENOSYS);
|
||||
}
|
||||
#endif
|
||||
|
||||
static struct usba_ep * usba_udc_pdata(struct platform_device *pdev,
|
||||
struct usba_udc *udc)
|
||||
{
|
||||
struct usba_platform_data *pdata = pdev->dev.platform_data;
|
||||
struct usba_ep *eps;
|
||||
int i;
|
||||
|
||||
if (!pdata)
|
||||
return ERR_PTR(-ENXIO);
|
||||
|
||||
eps = devm_kzalloc(&pdev->dev, sizeof(struct usba_ep) * pdata->num_ep,
|
||||
GFP_KERNEL);
|
||||
if (!eps)
|
||||
return ERR_PTR(-ENOMEM);
|
||||
|
||||
udc->gadget.ep0 = &eps[0].ep;
|
||||
|
||||
udc->vbus_pin = pdata->vbus_pin;
|
||||
udc->vbus_pin_inverted = pdata->vbus_pin_inverted;
|
||||
udc->num_ep = pdata->num_ep;
|
||||
|
||||
INIT_LIST_HEAD(&eps[0].ep.ep_list);
|
||||
|
||||
for (i = 0; i < pdata->num_ep; i++) {
|
||||
struct usba_ep *ep = &eps[i];
|
||||
|
||||
ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
|
||||
ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
|
||||
ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
|
||||
ep->ep.ops = &usba_ep_ops;
|
||||
ep->ep.name = pdata->ep[i].name;
|
||||
ep->fifo_size = ep->ep.maxpacket = pdata->ep[i].fifo_size;
|
||||
ep->udc = udc;
|
||||
INIT_LIST_HEAD(&ep->queue);
|
||||
ep->nr_banks = pdata->ep[i].nr_banks;
|
||||
ep->index = pdata->ep[i].index;
|
||||
ep->can_dma = pdata->ep[i].can_dma;
|
||||
ep->can_isoc = pdata->ep[i].can_isoc;
|
||||
|
||||
if (i)
|
||||
list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
|
||||
}
|
||||
|
||||
return eps;
|
||||
}
|
||||
|
||||
static int __init usba_udc_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct resource *regs, *fifo;
|
||||
struct clk *pclk, *hclk;
|
||||
struct usba_udc *udc;
|
||||
static struct usba_ep *usba_ep;
|
||||
int irq, ret, i;
|
||||
|
||||
udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL);
|
||||
@ -1846,7 +1981,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
|
||||
|
||||
regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
|
||||
fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
|
||||
if (!regs || !fifo || !pdata)
|
||||
if (!regs || !fifo)
|
||||
return -ENXIO;
|
||||
|
||||
irq = platform_get_irq(pdev, 0);
|
||||
@ -1892,47 +2027,14 @@ static int __init usba_udc_probe(struct platform_device *pdev)
|
||||
usba_writel(udc, CTRL, USBA_DISABLE_MASK);
|
||||
clk_disable(pclk);
|
||||
|
||||
usba_ep = kzalloc(sizeof(struct usba_ep) * pdata->num_ep,
|
||||
GFP_KERNEL);
|
||||
if (!usba_ep)
|
||||
if (pdev->dev.of_node)
|
||||
udc->usba_ep = atmel_udc_of_init(pdev, udc);
|
||||
else
|
||||
udc->usba_ep = usba_udc_pdata(pdev, udc);
|
||||
|
||||
if (IS_ERR(udc->usba_ep)) {
|
||||
ret = PTR_ERR(udc->usba_ep);
|
||||
goto err_alloc_ep;
|
||||
|
||||
udc->usba_ep = usba_ep;
|
||||
udc->gadget.ep0 = &usba_ep[0].ep;
|
||||
|
||||
INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
|
||||
usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
|
||||
usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
|
||||
usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
|
||||
usba_ep[0].ep.ops = &usba_ep_ops;
|
||||
usba_ep[0].ep.name = pdata->ep[0].name;
|
||||
usba_ep[0].ep.maxpacket = pdata->ep[0].fifo_size;
|
||||
usba_ep[0].udc = udc;
|
||||
INIT_LIST_HEAD(&usba_ep[0].queue);
|
||||
usba_ep[0].fifo_size = pdata->ep[0].fifo_size;
|
||||
usba_ep[0].nr_banks = pdata->ep[0].nr_banks;
|
||||
usba_ep[0].index = pdata->ep[0].index;
|
||||
usba_ep[0].can_dma = pdata->ep[0].can_dma;
|
||||
usba_ep[0].can_isoc = pdata->ep[0].can_isoc;
|
||||
|
||||
for (i = 1; i < pdata->num_ep; i++) {
|
||||
struct usba_ep *ep = &usba_ep[i];
|
||||
|
||||
ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
|
||||
ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
|
||||
ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
|
||||
ep->ep.ops = &usba_ep_ops;
|
||||
ep->ep.name = pdata->ep[i].name;
|
||||
ep->ep.maxpacket = pdata->ep[i].fifo_size;
|
||||
ep->udc = udc;
|
||||
INIT_LIST_HEAD(&ep->queue);
|
||||
ep->fifo_size = pdata->ep[i].fifo_size;
|
||||
ep->nr_banks = pdata->ep[i].nr_banks;
|
||||
ep->index = pdata->ep[i].index;
|
||||
ep->can_dma = pdata->ep[i].can_dma;
|
||||
ep->can_isoc = pdata->ep[i].can_isoc;
|
||||
|
||||
list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
|
||||
}
|
||||
|
||||
ret = request_irq(irq, usba_udc_irq, 0, "atmel_usba_udc", udc);
|
||||
@ -1943,16 +2045,12 @@ static int __init usba_udc_probe(struct platform_device *pdev)
|
||||
}
|
||||
udc->irq = irq;
|
||||
|
||||
if (gpio_is_valid(pdata->vbus_pin)) {
|
||||
if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
|
||||
udc->vbus_pin = pdata->vbus_pin;
|
||||
udc->vbus_pin_inverted = pdata->vbus_pin_inverted;
|
||||
|
||||
if (gpio_is_valid(udc->vbus_pin)) {
|
||||
if (!devm_gpio_request(&pdev->dev, udc->vbus_pin, "atmel_usba_udc")) {
|
||||
ret = request_irq(gpio_to_irq(udc->vbus_pin),
|
||||
usba_vbus_irq, 0,
|
||||
"atmel_usba_udc", udc);
|
||||
if (ret) {
|
||||
gpio_free(udc->vbus_pin);
|
||||
udc->vbus_pin = -ENODEV;
|
||||
dev_warn(&udc->pdev->dev,
|
||||
"failed to request vbus irq; "
|
||||
@ -1971,20 +2069,17 @@ static int __init usba_udc_probe(struct platform_device *pdev)
|
||||
goto err_add_udc;
|
||||
|
||||
usba_init_debugfs(udc);
|
||||
for (i = 1; i < pdata->num_ep; i++)
|
||||
usba_ep_init_debugfs(udc, &usba_ep[i]);
|
||||
for (i = 1; i < udc->num_ep; i++)
|
||||
usba_ep_init_debugfs(udc, &udc->usba_ep[i]);
|
||||
|
||||
return 0;
|
||||
|
||||
err_add_udc:
|
||||
if (gpio_is_valid(pdata->vbus_pin)) {
|
||||
if (gpio_is_valid(udc->vbus_pin))
|
||||
free_irq(gpio_to_irq(udc->vbus_pin), udc);
|
||||
gpio_free(udc->vbus_pin);
|
||||
}
|
||||
|
||||
free_irq(irq, udc);
|
||||
err_request_irq:
|
||||
kfree(usba_ep);
|
||||
err_alloc_ep:
|
||||
iounmap(udc->fifo);
|
||||
err_map_fifo:
|
||||
@ -2003,23 +2098,20 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct usba_udc *udc;
|
||||
int i;
|
||||
struct usba_platform_data *pdata = pdev->dev.platform_data;
|
||||
|
||||
udc = platform_get_drvdata(pdev);
|
||||
|
||||
usb_del_gadget_udc(&udc->gadget);
|
||||
|
||||
for (i = 1; i < pdata->num_ep; i++)
|
||||
for (i = 1; i < udc->num_ep; i++)
|
||||
usba_ep_cleanup_debugfs(&udc->usba_ep[i]);
|
||||
usba_cleanup_debugfs(udc);
|
||||
|
||||
if (gpio_is_valid(udc->vbus_pin)) {
|
||||
free_irq(gpio_to_irq(udc->vbus_pin), udc);
|
||||
gpio_free(udc->vbus_pin);
|
||||
}
|
||||
|
||||
free_irq(udc->irq, udc);
|
||||
kfree(usba_ep);
|
||||
iounmap(udc->fifo);
|
||||
iounmap(udc->regs);
|
||||
clk_put(udc->hclk);
|
||||
@ -2028,11 +2120,21 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if defined(CONFIG_OF)
|
||||
static const struct of_device_id atmel_udc_dt_ids[] = {
|
||||
{ .compatible = "atmel,at91sam9rl-udc" },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(of, atmel_udc_dt_ids);
|
||||
#endif
|
||||
|
||||
static struct platform_driver udc_driver = {
|
||||
.remove = __exit_p(usba_udc_remove),
|
||||
.driver = {
|
||||
.name = "atmel_usba_udc",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = of_match_ptr(atmel_udc_dt_ids),
|
||||
},
|
||||
};
|
||||
|
||||
|
@ -317,6 +317,7 @@ struct usba_udc {
|
||||
int irq;
|
||||
int vbus_pin;
|
||||
int vbus_pin_inverted;
|
||||
int num_ep;
|
||||
struct clk *pclk;
|
||||
struct clk *hclk;
|
||||
struct usba_ep *usba_ep;
|
||||
|
Loading…
Reference in New Issue
Block a user