ARM: AT91: Add DT support to AT91RM9200 System Timer

Based on AT91 PIT DT patch from Jean-Christophe PLAGNIOL-VILLARD.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This commit is contained in:
Joachim Eastwood 2012-10-28 18:31:07 +00:00 committed by Jean-Christophe PLAGNIOL-VILLARD
parent 35ed3c7a3d
commit 454c46df83
2 changed files with 67 additions and 2 deletions

View File

@ -7,6 +7,12 @@ PIT Timer required properties:
- interrupts: Should contain interrupt for the PIT which is the IRQ line
shared across all System Controller members.
System Timer (ST) required properties:
- compatible: Should be "atmel,at91rm9200-st"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt for the ST which is the IRQ line
shared across all System Controller members.
TC/TCLIB Timer required properties:
- compatible: Should be "atmel,<chip>-pit".
<chip> can be "at91rm9200" or "at91sam9x5"

View File

@ -24,6 +24,9 @@
#include <linux/irq.h>
#include <linux/clockchips.h>
#include <linux/export.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <asm/mach/time.h>
@ -91,7 +94,8 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
static struct irqaction at91rm9200_timer_irq = {
.name = "at91_tick",
.flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = at91rm9200_timer_interrupt
.handler = at91rm9200_timer_interrupt,
.irq = NR_IRQS_LEGACY + AT91_ID_SYS,
};
static cycle_t read_clk32k(struct clocksource *cs)
@ -179,8 +183,60 @@ static struct clock_event_device clkevt = {
void __iomem *at91_st_base;
EXPORT_SYMBOL_GPL(at91_st_base);
#ifdef CONFIG_OF
static struct of_device_id at91rm9200_st_timer_ids[] = {
{ .compatible = "atmel,at91rm9200-st" },
{ /* sentinel */ }
};
static int __init of_at91rm9200_st_init(void)
{
struct device_node *np;
int ret;
np = of_find_matching_node(NULL, at91rm9200_st_timer_ids);
if (!np)
goto err;
at91_st_base = of_iomap(np, 0);
if (!at91_st_base)
goto node_err;
/* Get the interrupts property */
ret = irq_of_parse_and_map(np, 0);
if (!ret)
goto ioremap_err;
at91rm9200_timer_irq.irq = ret;
of_node_put(np);
return 0;
ioremap_err:
iounmap(at91_st_base);
node_err:
of_node_put(np);
err:
return -EINVAL;
}
#else
static int __init of_at91rm9200_st_init(void)
{
return -EINVAL;
}
#endif
void __init at91rm9200_ioremap_st(u32 addr)
{
#ifdef CONFIG_OF
struct device_node *np;
np = of_find_matching_node(NULL, at91rm9200_st_timer_ids);
if (np) {
of_node_put(np);
return;
}
#endif
at91_st_base = ioremap(addr, 256);
if (!at91_st_base)
panic("Impossible to ioremap ST\n");
@ -191,13 +247,16 @@ void __init at91rm9200_ioremap_st(u32 addr)
*/
void __init at91rm9200_timer_init(void)
{
/* For device tree enabled device: initialize here */
of_at91rm9200_st_init();
/* Disable all timer interrupts, and clear any pending ones */
at91_st_write(AT91_ST_IDR,
AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
at91_st_read(AT91_ST_SR);
/* Make IRQs happen for the system timer */
setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq);
setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq);
/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
* directly for the clocksource and all clockevents, after adjusting