mirror of
https://github.com/torvalds/linux.git
synced 2024-12-24 11:51:27 +00:00
media: dt-bindings: adv7604: Convert bindings to json-schema
Convert ADV7604 video decoder documentation to json-schema. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This commit is contained in:
parent
3e51ce5b1e
commit
450c6b108e
@ -1,87 +0,0 @@
|
||||
* Analog Devices ADV7604/11/12 video decoder with HDMI receiver
|
||||
|
||||
The ADV7604 and ADV7611/12 are multiformat video decoders with an integrated
|
||||
HDMI receiver. The ADV7604 has four multiplexed HDMI inputs and one analog
|
||||
input, and the ADV7611 has one HDMI input and no analog input. The 7612 is
|
||||
similar to the 7611 but has 2 HDMI inputs.
|
||||
|
||||
These device tree bindings support the ADV7611/12 only at the moment.
|
||||
|
||||
Required Properties:
|
||||
|
||||
- compatible: Must contain one of the following
|
||||
- "adi,adv7611" for the ADV7611
|
||||
- "adi,adv7612" for the ADV7612
|
||||
|
||||
- reg: I2C slave addresses
|
||||
The ADV76xx has up to thirteen 256-byte maps that can be accessed via the
|
||||
main I2C ports. Each map has it own I2C address and acts as a standard
|
||||
slave device on the I2C bus. The main address is mandatory, others are
|
||||
optional and revert to defaults if not specified.
|
||||
|
||||
The device node must contain one 'port' child node per device input and output
|
||||
port, in accordance with the video interface bindings defined in
|
||||
Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
|
||||
are numbered as follows.
|
||||
|
||||
Port ADV7611 ADV7612
|
||||
------------------------------------------------------------
|
||||
HDMI 0 0, 1
|
||||
Digital output 1 2
|
||||
|
||||
The digital output port node must contain at least one endpoint.
|
||||
|
||||
Optional Properties:
|
||||
|
||||
- hpd-gpios: References to the GPIOs that control the HDMI hot-plug
|
||||
detection pins, one per HDMI input. The active flag indicates the GPIO
|
||||
level that enables hot-plug detection.
|
||||
- reset-gpios: Reference to the GPIO connected to the device's reset pin.
|
||||
- default-input: Select which input is selected after reset.
|
||||
- reg-names : Names of maps with programmable addresses.
|
||||
It can contain any map needing a non-default address.
|
||||
Possible maps names are :
|
||||
"main", "avlink", "cec", "infoframe", "esdp", "dpp", "afe",
|
||||
"rep", "edid", "hdmi", "test", "cp", "vdp"
|
||||
|
||||
Optional Endpoint Properties:
|
||||
|
||||
The following three properties are defined in video-interfaces.txt and are
|
||||
valid for source endpoints only.
|
||||
|
||||
- hsync-active: Horizontal synchronization polarity. Defaults to active low.
|
||||
- vsync-active: Vertical synchronization polarity. Defaults to active low.
|
||||
- pclk-sample: Pixel clock polarity. Defaults to output on the falling edge.
|
||||
|
||||
If none of hsync-active, vsync-active and pclk-sample is specified the
|
||||
endpoint will use embedded BT.656 synchronization.
|
||||
|
||||
Example:
|
||||
|
||||
hdmi_receiver@4c {
|
||||
compatible = "adi,adv7611";
|
||||
/*
|
||||
* The edid page will be accessible @ 0x66 on the I2C bus. All
|
||||
* other maps will retain their default addresses.
|
||||
*/
|
||||
reg = <0x4c>, <0x66>;
|
||||
reg-names = "main", "edid";
|
||||
|
||||
reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>;
|
||||
hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
default-input = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
hdmi_in: endpoint {
|
||||
remote-endpoint = <&ccdc_in>;
|
||||
};
|
||||
};
|
||||
};
|
178
Documentation/devicetree/bindings/media/i2c/adv7604.yaml
Normal file
178
Documentation/devicetree/bindings/media/i2c/adv7604.yaml
Normal file
@ -0,0 +1,178 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/media/i2c/adv7604.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Analog Devices ADV7604/11/12 video decoder with HDMI receiver
|
||||
|
||||
maintainers:
|
||||
- Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
||||
|
||||
description:
|
||||
The ADV7604 and ADV7611/12 are multiformat video decoders with an integrated
|
||||
HDMI receiver. The ADV7604 has four multiplexed HDMI inputs and one analog
|
||||
input, and the ADV7611 has one HDMI input and no analog input. The 7612 is
|
||||
similar to the 7611 but has 2 HDMI inputs.
|
||||
|
||||
These device tree bindings support the ADV7611/12 only at the moment.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
items:
|
||||
- enum:
|
||||
- adi,adv7611
|
||||
- adi,adv7612
|
||||
|
||||
reg:
|
||||
minItems: 1
|
||||
maxItems: 13
|
||||
|
||||
reg-names:
|
||||
minItems: 1
|
||||
maxItems: 13
|
||||
items:
|
||||
- const: main
|
||||
- enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
|
||||
- enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
|
||||
- enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
|
||||
- enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
|
||||
- enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
|
||||
- enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
|
||||
- enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
|
||||
- enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
|
||||
- enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
|
||||
- enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
|
||||
- enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
|
||||
- enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios:
|
||||
maxItems: 1
|
||||
|
||||
hpd-gpios:
|
||||
minItems: 1
|
||||
description:
|
||||
References to the GPIOs that control the HDMI hot-plug detection pins,
|
||||
one per HDMI input. The active flag indicates the GPIO level that
|
||||
enables hot-plug detection.
|
||||
|
||||
default-input:
|
||||
maxItems: 1
|
||||
description:
|
||||
Select which input is selected after reset.
|
||||
|
||||
ports:
|
||||
type: object
|
||||
description:
|
||||
A node containing input and output port nodes with endpoint definitions
|
||||
as documented in
|
||||
Documentation/devicetree/bindings/media/video-interfaces.txt
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: adi,adv7611
|
||||
then:
|
||||
properties:
|
||||
ports:
|
||||
properties:
|
||||
'#address-cells':
|
||||
const: 1
|
||||
'#size-cells':
|
||||
const: 0
|
||||
port@0:
|
||||
type: object
|
||||
description: Input port
|
||||
port@1:
|
||||
type: object
|
||||
description: Output port
|
||||
|
||||
required:
|
||||
- port@1
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- ports
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: adi,adv7612
|
||||
then:
|
||||
properties:
|
||||
ports:
|
||||
properties:
|
||||
'#address-cells':
|
||||
const: 1
|
||||
'#size-cells':
|
||||
const: 0
|
||||
port@2:
|
||||
type: object
|
||||
description: Output port
|
||||
|
||||
patternProperties:
|
||||
"^port@[0-1]$":
|
||||
type: object
|
||||
description: Input port
|
||||
|
||||
required:
|
||||
- port@2
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- ports
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
hdmi_receiver@4c {
|
||||
compatible = "adi,adv7611";
|
||||
/*
|
||||
* The edid page will be accessible @ 0x66 on the I2C bus. All
|
||||
* other maps will retain their default addresses.
|
||||
*/
|
||||
reg = <0x4c>, <0x66>;
|
||||
reg-names = "main", "edid";
|
||||
|
||||
reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>;
|
||||
hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>;
|
||||
default-input = <0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
hdmi_in: endpoint {
|
||||
remote-endpoint = <&ccdc_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
};
|
||||
};
|
Loading…
Reference in New Issue
Block a user