spi: Updates for 3.6

Since Grant is even more specacularly busy than usual for the time being
 I've been collecting SPI patches for him for this release - probably
 things will revert back to Grant before the next release.  There's
 nothing too exciting here, mostly it's simple driver specific stuff:
 
 - Add spi: to the modaliases of SPI devices to provide namespacing.
 - A driver for AD-FMCOMMS1-EBZ.
 - DT binding for Orion.
 - Fixes and cleanups for i.MX, PL0022, OMAP and bitbang drivers.
 
 There may be a few more fixes I've missed, people keep sending me new
 things.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQD+gTAAoJEBus8iNuMP3diecP/j88CTuSVi2C9LQ6irty2q6y
 62eLoR5m5J9zqqRlsFLkerxuanlwyD0WPR4B86SZMr/TQbXkLtmdVyQwSieyMfnN
 4HSrFQawCnVANoBrvnKa1vHfP4ouBStXIZa5v/iSAC4tN4K/wVGUvl6Kral5+ktC
 5BRwcEdcrVR4KnD74i7ombopM/hl6fRdNS+TwgfXlGwGFHPYbHOa+aJZnGUORWfw
 30jrKLap8cTGLDTFQ+Lu8WPzap+RuGlMSWGhXlYrivKNepvpt/WEMhJnfJ/ADLqO
 ASGe3C69xGTF6YRETSoH5+1VZjRhf+S9y/nV5gkQZKtDDGez5iFmCGZtv/m87u6/
 nIuTICa7QjI9bvP9novq0h6EUwURyL4dtdC4VI3IedIpgFiKGxz3J63YJLsIc7tH
 5jXPJAkyU/yj23eDywftYZskK3iNYOthB2VO3JPcmGQRXeMWDvTPXXJBcOy5fvW0
 aOmE+vXINiQnmddBBNIuhPGRlJUGSpHLaioz+H2+unrNPHjQnv+CSHt7YuYwjTGp
 IFFwVSUK6r4O+/W7ciKalVQr0bjTM6J3wO0sCqxta1qVoI89RgcM3h3XwXTCb6Ly
 0Ywgn+3W71XDiY+L4VvYRTcur2kGB/rmIsIORuqS/FkhR9iuIx7u30d6KmlGR2ak
 i+cExj0Qo/pF4TXDw22W
 =I2b9
 -----END PGP SIGNATURE-----

Merge tag 'spi-3.6' into v3.5-rc7-dt-v3

spi: Updates for 3.6

Since Grant is even more specacularly busy than usual for the time being
I've been collecting SPI patches for him for this release - probably
things will revert back to Grant before the next release.  There's
nothing too exciting here, mostly it's simple driver specific stuff:

- Add spi: to the modaliases of SPI devices to provide namespacing.
- A driver for AD-FMCOMMS1-EBZ.
- DT binding for Orion.
- Fixes and cleanups for i.MX, PL0022, OMAP and bitbang drivers.

There may be a few more fixes I've missed, people keep sending me new
things.

Documentation/devicetree/bindings/spi/spi-orion.txt

@@ -0,0 +1,19 @@
+Marvell Orion SPI device
+
+Required properties:
+- compatible : should be "marvell,orion-spi".
+- reg : offset and length of the register set for the device
+- cell-index : Which of multiple SPI controllers is this.
+Optional properties:
+- interrupts : Is currently not used.
+
+Example:
+       spi@10600 {
+	       compatible = "marvell,orion-spi";
+	       #address-cells = <1>;
+	       #size-cells = <0>;
+	       cell-index = <0>;
+	       reg = <0x10600 0x28>;
+	       interrupts = <23>;
+	       status = "disabled";
+       };

drivers/spi/Kconfig

@@ -357,7 +357,7 @@ config SPI_STMP3XXX
 
 config SPI_TEGRA
 	tristate "Nvidia Tegra SPI controller"
-	depends on ARCH_TEGRA && TEGRA_SYSTEM_DMA
+	depends on ARCH_TEGRA && (TEGRA_SYSTEM_DMA || TEGRA20_APB_DMA)
 	help
 	  SPI driver for NVidia Tegra SoCs
 
@@ -384,6 +384,13 @@ config SPI_TXX9
 	help
 	  SPI driver for Toshiba TXx9 MIPS SoCs
 
+config SPI_XCOMM
+	tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver"
+	depends on I2C
+	help
+	  Support for the SPI-I2C bridge found on the Analog Devices
+	  AD-FMCOMMS1-EBZ board.
+
 config SPI_XILINX
 	tristate "Xilinx SPI controller common module"
 	depends on HAS_IOMEM && EXPERIMENTAL

drivers/spi/Makefile

@@ -61,5 +61,6 @@ obj-$(CONFIG_SPI_TI_SSP)		+= spi-ti-ssp.o
 obj-$(CONFIG_SPI_TLE62X0)		+= spi-tle62x0.o
 obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi-topcliff-pch.o
 obj-$(CONFIG_SPI_TXX9)			+= spi-txx9.o
+obj-$(CONFIG_SPI_XCOMM)		+= spi-xcomm.o
 obj-$(CONFIG_SPI_XILINX)		+= spi-xilinx.o
 

drivers/spi/spi-bcm63xx.c

@@ -129,7 +129,7 @@ static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
 
 	/* Find the closest clock configuration */
 	for (i = 0; i < SPI_CLK_MASK; i++) {
-		if (hz <= bcm63xx_spi_freq_table[i][0]) {
+		if (hz >= bcm63xx_spi_freq_table[i][0]) {
 			clk_cfg = bcm63xx_spi_freq_table[i][1];
 			break;
 		}

drivers/spi/spi-gpio.c

@@ -235,7 +235,8 @@ static int spi_gpio_setup(struct spi_device *spi)
 			status = gpio_request(cs, dev_name(&spi->dev));
 			if (status)
 				return status;
-			status = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH);
+			status = gpio_direction_output(cs,
+					!(spi->mode & SPI_CS_HIGH));
 		}
 	}
 	if (!status)

drivers/spi/spi-imx.c

@@ -626,7 +626,7 @@ static void spi_imx_chipselect(struct spi_device *spi, int is_active)
 	int active = is_active != BITBANG_CS_INACTIVE;
 	int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH);
 
-	if (gpio < 0)
+	if (!gpio_is_valid(gpio))
 		return;
 
 	gpio_set_value(gpio, dev_is_lowactive ^ active);
@@ -688,8 +688,6 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 		config.speed_hz = spi->max_speed_hz;
 	if (!config.bpw)
 		config.bpw = spi->bits_per_word;
-	if (!config.speed_hz)
-		config.speed_hz = spi->max_speed_hz;
 
 	/* Initialize the functions for transfer */
 	if (config.bpw <= 8) {
@@ -738,7 +736,7 @@ static int spi_imx_setup(struct spi_device *spi)
 	dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__,
 		 spi->mode, spi->bits_per_word, spi->max_speed_hz);
 
-	if (gpio >= 0)
+	if (gpio_is_valid(gpio))
 		gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1);
 
 	spi_imx_chipselect(spi, BITBANG_CS_INACTIVE);
@@ -791,11 +789,11 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
 
 	for (i = 0; i < master->num_chipselect; i++) {
 		int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
-		if (cs_gpio < 0 && mxc_platform_info)
+		if (!gpio_is_valid(cs_gpio) && mxc_platform_info)
 			cs_gpio = mxc_platform_info->chipselect[i];
 
 		spi_imx->chipselect[i] = cs_gpio;
-		if (cs_gpio < 0)
+		if (!gpio_is_valid(cs_gpio))
 			continue;
 
 		ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME);
@@ -897,7 +895,7 @@ out_release_mem:
 	release_mem_region(res->start, resource_size(res));
 out_gpio_free:
 	while (--i >= 0) {
-		if (spi_imx->chipselect[i] >= 0)
+		if (gpio_is_valid(spi_imx->chipselect[i]))
 			gpio_free(spi_imx->chipselect[i]);
 	}
 	spi_master_put(master);
@@ -922,7 +920,7 @@ static int __devexit spi_imx_remove(struct platform_device *pdev)
 	iounmap(spi_imx->base);
 
 	for (i = 0; i < master->num_chipselect; i++)
-		if (spi_imx->chipselect[i] >= 0)
+		if (gpio_is_valid(spi_imx->chipselect[i]))
 			gpio_free(spi_imx->chipselect[i]);
 
 	spi_master_put(master);

drivers/spi/spi-omap2-mcspi.c

@@ -388,7 +388,8 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 
 	if (tx != NULL) {
 		wait_for_completion(&mcspi_dma->dma_tx_completion);
-		dma_unmap_single(&spi->dev, xfer->tx_dma, count, DMA_TO_DEVICE);
+		dma_unmap_single(mcspi->dev, xfer->tx_dma, count,
+				 DMA_TO_DEVICE);
 
 		/* for TX_ONLY mode, be sure all words have shifted out */
 		if (rx == NULL) {
@@ -403,7 +404,8 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 
 	if (rx != NULL) {
 		wait_for_completion(&mcspi_dma->dma_rx_completion);
-		dma_unmap_single(&spi->dev, xfer->rx_dma, count, DMA_FROM_DEVICE);
+		dma_unmap_single(mcspi->dev, xfer->rx_dma, count,
+				 DMA_FROM_DEVICE);
 		omap2_mcspi_set_enable(spi, 0);
 
 		if (l & OMAP2_MCSPI_CHCONF_TURBO) {
@@ -1032,7 +1034,7 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
 	return 0;
 }
 
-static int __init omap2_mcspi_master_setup(struct omap2_mcspi *mcspi)
+static int __devinit omap2_mcspi_master_setup(struct omap2_mcspi *mcspi)
 {
 	struct spi_master	*master = mcspi->master;
 	struct omap2_mcspi_regs	*ctx = &mcspi->ctx;

drivers/spi/spi-orion.c

@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/spi/spi.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/clk.h>
 #include <asm/unaligned.h>
 
@@ -45,7 +46,6 @@ struct orion_spi {
 	void __iomem		*base;
 	unsigned int		max_speed;
 	unsigned int		min_speed;
-	struct orion_spi_info	*spi_info;
 	struct clk              *clk;
 };
 
@@ -450,11 +450,10 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 	struct spi_master *master;
 	struct orion_spi *spi;
 	struct resource *r;
-	struct orion_spi_info *spi_info;
 	unsigned long tclk_hz;
 	int status = 0;
-
+	const u32 *iprop;
-	spi_info = pdev->dev.platform_data;
+	int size;
 
 	master = spi_alloc_master(&pdev->dev, sizeof *spi);
 	if (master == NULL) {
@@ -464,6 +463,12 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 
 	if (pdev->id != -1)
 		master->bus_num = pdev->id;
+	if (pdev->dev.of_node) {
+		iprop = of_get_property(pdev->dev.of_node, "cell-index",
+					&size);
+		if (iprop && size == sizeof(*iprop))
+			master->bus_num = *iprop;
+	}
 
 	/* we support only mode 0, and no options */
 	master->mode_bits = 0;
@@ -476,7 +481,6 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 
 	spi = spi_master_get_devdata(master);
 	spi->master = master;
-	spi->spi_info = spi_info;
 
 	spi->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(spi->clk)) {
@@ -511,6 +515,7 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 	if (orion_spi_reset(spi) < 0)
 		goto out_rel_mem;
 
+	master->dev.of_node = pdev->dev.of_node;
 	status = spi_register_master(master);
 	if (status < 0)
 		goto out_rel_mem;
@@ -552,10 +557,17 @@ static int __exit orion_spi_remove(struct platform_device *pdev)
 
 MODULE_ALIAS("platform:" DRIVER_NAME);
 
+static const struct of_device_id orion_spi_of_match_table[] __devinitdata = {
+	{ .compatible = "marvell,orion-spi", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, orion_spi_of_match_table);
+
 static struct platform_driver orion_spi_driver = {
 	.driver = {
 		.name	= DRIVER_NAME,
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(orion_spi_of_match_table),
 	},
 	.remove		= __exit_p(orion_spi_remove),
 };

drivers/spi/spi-pl022.c

@@ -489,6 +489,11 @@ static void giveback(struct pl022 *pl022)
 	pl022->cur_transfer = NULL;
 	pl022->cur_chip = NULL;
 	spi_finalize_current_message(pl022->master);
+
+	/* disable the SPI/SSP operation */
+	writew((readw(SSP_CR1(pl022->virtbase)) &
+		(~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
+
 }
 
 /**
@@ -2048,6 +2053,9 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
 	printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n",
 	       adev->res.start, pl022->virtbase);
 
+	pm_runtime_enable(dev);
+	pm_runtime_resume(dev);
+
 	pl022->clk = clk_get(&adev->dev, NULL);
 	if (IS_ERR(pl022->clk)) {
 		status = PTR_ERR(pl022->clk);
@@ -2158,6 +2166,7 @@ pl022_remove(struct amba_device *adev)
 	clk_disable(pl022->clk);
 	clk_unprepare(pl022->clk);
 	clk_put(pl022->clk);
+	pm_runtime_disable(&adev->dev);
 	iounmap(pl022->virtbase);
 	amba_release_regions(adev);
 	tasklet_disable(&pl022->pump_transfers);
@@ -2251,15 +2260,6 @@ static struct vendor_data vendor_st_pl023 = {
 	.loopback = false,
 };
 
-static struct vendor_data vendor_db5500_pl023 = {
-	.fifodepth = 32,
-	.max_bpw = 32,
-	.unidir = false,
-	.extended_cr = true,
-	.pl023 = true,
-	.loopback = true,
-};
-
 static struct amba_id pl022_ids[] = {
 	{
 		/*
@@ -2291,11 +2291,6 @@ static struct amba_id pl022_ids[] = {
 		.mask	= 0xffffffff,
 		.data	= &vendor_st_pl023,
 	},
-	{
-		.id	= 0x10080023,
-		.mask	= 0xffffffff,
-		.data	= &vendor_db5500_pl023,
-	},
 	{ 0, 0 },
 };
 

drivers/spi/spi-tegra.c

@@ -30,6 +30,7 @@
 #include <linux/delay.h>
 
 #include <linux/spi/spi.h>
+#include <linux/dmaengine.h>
 
 #include <mach/dma.h>
 
@@ -162,12 +163,23 @@ struct spi_tegra_data {
 	 * require transfers to be 4 byte aligned we need a bounce buffer
 	 * for the generic case.
 	 */
+	int			dma_req_len;
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
 	struct tegra_dma_req	rx_dma_req;
 	struct tegra_dma_channel *rx_dma;
+#else
+	struct dma_chan		*rx_dma;
+	struct dma_slave_config	sconfig;
+	struct dma_async_tx_descriptor	*rx_dma_desc;
+	dma_cookie_t		rx_cookie;
+#endif
 	u32			*rx_bb;
 	dma_addr_t		rx_bb_phys;
 };
 
+#if !defined(CONFIG_TEGRA_SYSTEM_DMA)
+static void tegra_spi_rx_dma_complete(void *args);
+#endif
 
 static inline unsigned long spi_tegra_readl(struct spi_tegra_data *tspi,
 					    unsigned long reg)
@@ -190,10 +202,24 @@ static void spi_tegra_go(struct spi_tegra_data *tspi)
 
 	val = spi_tegra_readl(tspi, SLINK_DMA_CTL);
 	val &= ~SLINK_DMA_BLOCK_SIZE(~0) & ~SLINK_DMA_EN;
-	val |= SLINK_DMA_BLOCK_SIZE(tspi->rx_dma_req.size / 4 - 1);
+	val |= SLINK_DMA_BLOCK_SIZE(tspi->dma_req_len / 4 - 1);
 	spi_tegra_writel(tspi, val, SLINK_DMA_CTL);
-
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
+	tspi->rx_dma_req.size = tspi->dma_req_len;
 	tegra_dma_enqueue_req(tspi->rx_dma, &tspi->rx_dma_req);
+#else
+	tspi->rx_dma_desc = dmaengine_prep_slave_single(tspi->rx_dma,
+				tspi->rx_bb_phys, tspi->dma_req_len,
+				DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
+	if (!tspi->rx_dma_desc) {
+		dev_err(&tspi->pdev->dev, "dmaengine slave prep failed\n");
+		return;
+	}
+	tspi->rx_dma_desc->callback = tegra_spi_rx_dma_complete;
+	tspi->rx_dma_desc->callback_param = tspi;
+	tspi->rx_cookie = dmaengine_submit(tspi->rx_dma_desc);
+	dma_async_issue_pending(tspi->rx_dma);
+#endif
 
 	val |= SLINK_DMA_EN;
 	spi_tegra_writel(tspi, val, SLINK_DMA_CTL);
@@ -221,7 +247,7 @@ static unsigned spi_tegra_fill_tx_fifo(struct spi_tegra_data *tspi,
 		spi_tegra_writel(tspi, val, SLINK_TX_FIFO);
 	}
 
-	tspi->rx_dma_req.size = len / tspi->cur_bytes_per_word * 4;
+	tspi->dma_req_len = len / tspi->cur_bytes_per_word * 4;
 
 	return len;
 }
@@ -318,9 +344,8 @@ static void spi_tegra_start_message(struct spi_device *spi,
 	spi_tegra_start_transfer(spi, t);
 }
 
-static void tegra_spi_rx_dma_complete(struct tegra_dma_req *req)
+static void handle_spi_rx_dma_complete(struct spi_tegra_data *tspi)
 {
-	struct spi_tegra_data *tspi = req->dev;
 	unsigned long flags;
 	struct spi_message *m;
 	struct spi_device *spi;
@@ -380,6 +405,19 @@ static void tegra_spi_rx_dma_complete(struct tegra_dma_req *req)
 
 	spin_unlock_irqrestore(&tspi->lock, flags);
 }
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
+static void tegra_spi_rx_dma_complete(struct tegra_dma_req *req)
+{
+	struct spi_tegra_data *tspi = req->dev;
+	handle_spi_rx_dma_complete(tspi);
+}
+#else
+static void tegra_spi_rx_dma_complete(void *args)
+{
+	struct spi_tegra_data *tspi = args;
+	handle_spi_rx_dma_complete(tspi);
+}
+#endif
 
 static int spi_tegra_setup(struct spi_device *spi)
 {
@@ -471,6 +509,9 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev)
 	struct spi_tegra_data	*tspi;
 	struct resource		*r;
 	int ret;
+#if !defined(CONFIG_TEGRA_SYSTEM_DMA)
+	dma_cap_mask_t mask;
+#endif
 
 	master = spi_alloc_master(&pdev->dev, sizeof *tspi);
 	if (master == NULL) {
@@ -522,12 +563,24 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev)
 
 	INIT_LIST_HEAD(&tspi->queue);
 
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
 	tspi->rx_dma = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT);
 	if (!tspi->rx_dma) {
 		dev_err(&pdev->dev, "can not allocate rx dma channel\n");
 		ret = -ENODEV;
 		goto err3;
 	}
+#else
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	tspi->rx_dma = dma_request_channel(mask, NULL, NULL);
+	if (!tspi->rx_dma) {
+		dev_err(&pdev->dev, "can not allocate rx dma channel\n");
+		ret = -ENODEV;
+		goto err3;
+	}
+
+#endif
 
 	tspi->rx_bb = dma_alloc_coherent(&pdev->dev, sizeof(u32) * BB_LEN,
 					 &tspi->rx_bb_phys, GFP_KERNEL);
@@ -537,6 +590,7 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev)
 		goto err4;
 	}
 
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
 	tspi->rx_dma_req.complete = tegra_spi_rx_dma_complete;
 	tspi->rx_dma_req.to_memory = 1;
 	tspi->rx_dma_req.dest_addr = tspi->rx_bb_phys;
@@ -546,6 +600,23 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev)
 	tspi->rx_dma_req.source_wrap = 4;
 	tspi->rx_dma_req.req_sel = spi_tegra_req_sels[pdev->id];
 	tspi->rx_dma_req.dev = tspi;
+#else
+	/* Dmaengine Dma slave config */
+	tspi->sconfig.src_addr = tspi->phys + SLINK_RX_FIFO;
+	tspi->sconfig.dst_addr = tspi->phys + SLINK_RX_FIFO;
+	tspi->sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	tspi->sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	tspi->sconfig.slave_id = spi_tegra_req_sels[pdev->id];
+	tspi->sconfig.src_maxburst = 1;
+	tspi->sconfig.dst_maxburst = 1;
+	ret = dmaengine_device_control(tspi->rx_dma,
+			DMA_SLAVE_CONFIG, (unsigned long) &tspi->sconfig);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "can not do slave configure for dma %d\n",
+			ret);
+		goto err4;
+	}
+#endif
 
 	master->dev.of_node = pdev->dev.of_node;
 	ret = spi_register_master(master);
@@ -559,7 +630,11 @@ err5:
 	dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN,
 			  tspi->rx_bb, tspi->rx_bb_phys);
 err4:
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
 	tegra_dma_free_channel(tspi->rx_dma);
+#else
+	dma_release_channel(tspi->rx_dma);
+#endif
 err3:
 	clk_put(tspi->clk);
 err2:
@@ -581,7 +656,11 @@ static int __devexit spi_tegra_remove(struct platform_device *pdev)
 	tspi = spi_master_get_devdata(master);
 
 	spi_unregister_master(master);
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
 	tegra_dma_free_channel(tspi->rx_dma);
+#else
+	dma_release_channel(tspi->rx_dma);
+#endif
 
 	dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN,
 			  tspi->rx_bb, tspi->rx_bb_phys);

drivers/spi/spi-xcomm.c

@@ -0,0 +1,276 @@
+/*
+ * Analog Devices AD-FMCOMMS1-EBZ board I2C-SPI bridge driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <asm/unaligned.h>
+
+#define SPI_XCOMM_SETTINGS_LEN_OFFSET		10
+#define SPI_XCOMM_SETTINGS_3WIRE		BIT(6)
+#define SPI_XCOMM_SETTINGS_CS_HIGH		BIT(5)
+#define SPI_XCOMM_SETTINGS_SAMPLE_END		BIT(4)
+#define SPI_XCOMM_SETTINGS_CPHA			BIT(3)
+#define SPI_XCOMM_SETTINGS_CPOL			BIT(2)
+#define SPI_XCOMM_SETTINGS_CLOCK_DIV_MASK	0x3
+#define SPI_XCOMM_SETTINGS_CLOCK_DIV_64		0x2
+#define SPI_XCOMM_SETTINGS_CLOCK_DIV_16		0x1
+#define SPI_XCOMM_SETTINGS_CLOCK_DIV_4		0x0
+
+#define SPI_XCOMM_CMD_UPDATE_CONFIG	0x03
+#define SPI_XCOMM_CMD_WRITE		0x04
+
+#define SPI_XCOMM_CLOCK 48000000
+
+struct spi_xcomm {
+	struct i2c_client *i2c;
+
+	uint16_t settings;
+	uint16_t chipselect;
+
+	unsigned int current_speed;
+
+	uint8_t buf[63];
+};
+
+static int spi_xcomm_sync_config(struct spi_xcomm *spi_xcomm, unsigned int len)
+{
+	uint16_t settings;
+	uint8_t *buf = spi_xcomm->buf;
+
+	settings = spi_xcomm->settings;
+	settings |= len << SPI_XCOMM_SETTINGS_LEN_OFFSET;
+
+	buf[0] = SPI_XCOMM_CMD_UPDATE_CONFIG;
+	put_unaligned_be16(settings, &buf[1]);
+	put_unaligned_be16(spi_xcomm->chipselect, &buf[3]);
+
+	return i2c_master_send(spi_xcomm->i2c, buf, 5);
+}
+
+static void spi_xcomm_chipselect(struct spi_xcomm *spi_xcomm,
+	struct spi_device *spi, int is_active)
+{
+	unsigned long cs = spi->chip_select;
+	uint16_t chipselect = spi_xcomm->chipselect;
+
+	if (is_active)
+		chipselect |= BIT(cs);
+	else
+		chipselect &= ~BIT(cs);
+
+	spi_xcomm->chipselect = chipselect;
+}
+
+static int spi_xcomm_setup_transfer(struct spi_xcomm *spi_xcomm,
+	struct spi_device *spi, struct spi_transfer *t, unsigned int *settings)
+{
+	unsigned int speed;
+
+	if ((t->bits_per_word && t->bits_per_word != 8) || t->len > 62)
+		return -EINVAL;
+
+	speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz;
+
+	if (speed != spi_xcomm->current_speed) {
+		unsigned int divider = DIV_ROUND_UP(SPI_XCOMM_CLOCK, speed);
+		if (divider >= 64)
+			*settings |= SPI_XCOMM_SETTINGS_CLOCK_DIV_64;
+		else if (divider >= 16)
+			*settings |= SPI_XCOMM_SETTINGS_CLOCK_DIV_16;
+		else
+			*settings |= SPI_XCOMM_SETTINGS_CLOCK_DIV_4;
+
+		spi_xcomm->current_speed = speed;
+	}
+
+	if (spi->mode & SPI_CPOL)
+		*settings |= SPI_XCOMM_SETTINGS_CPOL;
+	else
+		*settings &= ~SPI_XCOMM_SETTINGS_CPOL;
+
+	if (spi->mode & SPI_CPHA)
+		*settings &= ~SPI_XCOMM_SETTINGS_CPHA;
+	else
+		*settings |= SPI_XCOMM_SETTINGS_CPHA;
+
+	if (spi->mode & SPI_3WIRE)
+		*settings |= SPI_XCOMM_SETTINGS_3WIRE;
+	else
+		*settings &= ~SPI_XCOMM_SETTINGS_3WIRE;
+
+	return 0;
+}
+
+static int spi_xcomm_txrx_bufs(struct spi_xcomm *spi_xcomm,
+	struct spi_device *spi, struct spi_transfer *t)
+{
+	int ret;
+
+	if (t->tx_buf) {
+		spi_xcomm->buf[0] = SPI_XCOMM_CMD_WRITE;
+		memcpy(spi_xcomm->buf + 1, t->tx_buf, t->len);
+
+		ret = i2c_master_send(spi_xcomm->i2c, spi_xcomm->buf, t->len + 1);
+		if (ret < 0)
+			return ret;
+		else if (ret != t->len + 1)
+			return -EIO;
+	} else if (t->rx_buf) {
+		ret = i2c_master_recv(spi_xcomm->i2c, t->rx_buf, t->len);
+		if (ret < 0)
+			return ret;
+		else if (ret != t->len)
+			return -EIO;
+	}
+
+	return t->len;
+}
+
+static int spi_xcomm_transfer_one(struct spi_master *master,
+	struct spi_message *msg)
+{
+	struct spi_xcomm *spi_xcomm = spi_master_get_devdata(master);
+	unsigned int settings = spi_xcomm->settings;
+	struct spi_device *spi = msg->spi;
+	unsigned cs_change = 0;
+	struct spi_transfer *t;
+	bool is_first = true;
+	int status = 0;
+	bool is_last;
+
+	is_first = true;
+
+	spi_xcomm_chipselect(spi_xcomm, spi, true);
+
+	list_for_each_entry(t, &msg->transfers, transfer_list) {
+
+		if (!t->tx_buf && !t->rx_buf && t->len) {
+			status = -EINVAL;
+			break;
+		}
+
+		status = spi_xcomm_setup_transfer(spi_xcomm, spi, t, &settings);
+		if (status < 0)
+			break;
+
+		is_last = list_is_last(&t->transfer_list, &msg->transfers);
+		cs_change = t->cs_change;
+
+		if (cs_change ^ is_last)
+			settings |= BIT(5);
+		else
+			settings &= ~BIT(5);
+
+		if (t->rx_buf) {
+			spi_xcomm->settings = settings;
+			status = spi_xcomm_sync_config(spi_xcomm, t->len);
+			if (status < 0)
+				break;
+		} else if (settings != spi_xcomm->settings || is_first) {
+			spi_xcomm->settings = settings;
+			status = spi_xcomm_sync_config(spi_xcomm, 0);
+			if (status < 0)
+				break;
+		}
+
+		if (t->len) {
+			status = spi_xcomm_txrx_bufs(spi_xcomm, spi, t);
+
+			if (status < 0)
+				break;
+
+			if (status > 0)
+				msg->actual_length += status;
+		}
+		status = 0;
+
+		if (t->delay_usecs)
+			udelay(t->delay_usecs);
+
+		is_first = false;
+	}
+
+	if (status != 0 || !cs_change)
+		spi_xcomm_chipselect(spi_xcomm, spi, false);
+
+	msg->status = status;
+	spi_finalize_current_message(master);
+
+	return status;
+}
+
+static int spi_xcomm_setup(struct spi_device *spi)
+{
+	if (spi->bits_per_word != 8)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int __devinit spi_xcomm_probe(struct i2c_client *i2c,
+	const struct i2c_device_id *id)
+{
+	struct spi_xcomm *spi_xcomm;
+	struct spi_master *master;
+	int ret;
+
+	master = spi_alloc_master(&i2c->dev, sizeof(*spi_xcomm));
+	if (!master)
+		return -ENOMEM;
+
+	spi_xcomm = spi_master_get_devdata(master);
+	spi_xcomm->i2c = i2c;
+
+	master->num_chipselect = 16;
+	master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_3WIRE;
+	master->flags = SPI_MASTER_HALF_DUPLEX;
+	master->setup = spi_xcomm_setup;
+	master->transfer_one_message = spi_xcomm_transfer_one;
+	master->dev.of_node = i2c->dev.of_node;
+	i2c_set_clientdata(i2c, master);
+
+	ret = spi_register_master(master);
+	if (ret < 0)
+		spi_master_put(master);
+
+	return ret;
+}
+
+static int __devexit spi_xcomm_remove(struct i2c_client *i2c)
+{
+	struct spi_master *master = i2c_get_clientdata(i2c);
+
+	spi_unregister_master(master);
+
+	return 0;
+}
+
+static const struct i2c_device_id spi_xcomm_ids[] = {
+	{ "spi-xcomm" },
+	{ },
+};
+
+static struct i2c_driver spi_xcomm_driver = {
+	.driver = {
+		.name	= "spi-xcomm",
+		.owner	= THIS_MODULE,
+	},
+	.id_table	= spi_xcomm_ids,
+	.probe		= spi_xcomm_probe,
+	.remove		= __devexit_p(spi_xcomm_remove),
+};
+module_i2c_driver(spi_xcomm_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Analog Devices AD-FMCOMMS1-EBZ board I2C-SPI bridge driver");

drivers/spi/spi.c

@@ -53,7 +53,7 @@ modalias_show(struct device *dev, struct device_attribute *a, char *buf)
 {
 	const struct spi_device	*spi = to_spi_device(dev);
 
-	return sprintf(buf, "%s\n", spi->modalias);
+	return sprintf(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias);
 }
 
 static struct device_attribute spi_dev_attrs[] = {

include/linux/amba/pl022.h

@@ -231,6 +231,7 @@ enum ssp_chip_select {
 struct dma_chan;
 /**
  * struct pl022_ssp_master - device.platform_data for SPI controller devices.
+ * @bus_id: identifier for this bus
  * @num_chipselect: chipselects are used to distinguish individual
  *     SPI slaves, and are numbered from zero to num_chipselects - 1.
  *     each slave has a chipselect signal, but it's common that not
@@ -259,19 +260,13 @@ struct pl022_ssp_controller {
  * struct ssp_config_chip - spi_board_info.controller_data for SPI
  * slave devices, copied to spi_device.controller_data.
  *
- * @lbm: used for test purpose to internally connect RX and TX
  * @iface: Interface type(Motorola, TI, Microwire, Universal)
  * @hierarchy: sets whether interface is master or slave
  * @slave_tx_disable: SSPTXD is disconnected (in slave mode only)
  * @clk_freq: Tune freq parameters of SSP(when in master mode)
- * @endian_rx: Endianess of Data in Rx FIFO
- * @endian_tx: Endianess of Data in Tx FIFO
- * @data_size: Width of data element(4 to 32 bits)
  * @com_mode: communication mode: polling, Interrupt or DMA
  * @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode)
  * @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode)
- * @clk_phase: Motorola SPI interface Clock phase
- * @clk_pol: Motorola SPI interface Clock polarity
  * @ctrl_len: Microwire interface: Control length
  * @wait_state: Microwire interface: Wait state
  * @duplex: Microwire interface: Full/Half duplex
@@ -279,8 +274,6 @@ struct pl022_ssp_controller {
  * before sampling the incoming line
  * @cs_control: function pointer to board-specific function to
  * assert/deassert I/O port to control HW generation of devices chip-select.
- * @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph)
- * @dma_config: DMA configuration for SSP controller and peripheral
  */
 struct pl022_config_chip {
 	enum ssp_interface iface;