Linux 3.16-rc5

-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTwvRvAAoJEHm+PkMAQRiG8CoIAJucWkj+MJFFoDXjR9hfI8U7
 /WeQLJP0GpWGMXd2KznX9epCuw5rsuaPAxCy1HFDNOa7OtNYacWrsIhByxOIDLwL
 YjDB9+fpMMPFWsr+LPJa8Ombh/TveCS77w6Pt5VMZFwvIKujiNK/C3MdxjReH5Gr
 iTGm8x7nEs2D6L2+5sQVlhXot/97phxIlBSP6wPXEiaztNZ9/JZi905Xpgq+WU16
 ZOA8MlJj1TQD4xcWyUcsQ5REwIOdQ6xxPF00wv/12RFela+Puy4JLAilnV6Mc12U
 fwYOZKbUNBS8rjfDDdyX3sljV1L5iFFqKkW3WFdnv/z8ZaZSo5NupWuavDnifKw=
 =6Q8o
 -----END PGP SIGNATURE-----

Merge tag 'v3.16-rc5' into HEAD

Docbook creation was broken. We need to move after
v3.16-rc1-3-ga981296f048b in order to get commit
a981296f04.

Linux 3.16-rc5

* tag 'v3.16-rc5': (985 commits)
  Linux 3.16-rc5
  clk: spear3xx: Set proper clock parent of uart1/2
  clk: spear3xx: Use proper control register offset
  parisc: drop unused defines and header includes
  parisc: fix fanotify_mark() syscall on 32bit compat kernel
  parisc: add serial ports of C8000/1GHz machine to hardware database
  ext4: fix potential null pointer dereference in ext4_free_inode
  ext4: fix a potential deadlock in __ext4_es_shrink()
  Documenation/laptops: rename and update hpfall.c
  DocBook: fix various typos
  DocBook: fix mtdnand typos
  scripts/kernel-doc: handle object-like macros
  Documentation/Changes: clean up mcelog paragraph
  ARM: at91: at91sam9x5: add clocks for usb device
  phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove
  phy: core: Fix error path in phy_create()
  drivers: phy: phy-samsung-usb2.c: Add missing MODULE_DEVICE_TABLE
  phy: omap-usb2: fix devm_ioremap_resource error detection code
  phy: sun4i: depend on RESET_CONTROLLER
  USB: serial: ftdi_sio: Add Infineon Triboard
  ...
This commit is contained in:
Mauro Carvalho Chehab 2014-07-17 09:56:14 -03:00
commit 419cb9b347
1119 changed files with 13951 additions and 8187 deletions

View File

@ -9,6 +9,10 @@
Linus
----------
M: Matt Mackal
E: mpm@selenic.com
D: SLOB slab allocator
N: Matti Aarnio
E: mea@nic.funet.fi
D: Alpha systems hacking, IPv6 and other network related stuff

View File

@ -280,12 +280,9 @@ that is possible.
mcelog
------
In Linux 2.6.31+ the i386 kernel needs to run the mcelog utility
as a regular cronjob similar to the x86-64 kernel to process and log
machine check events when CONFIG_X86_NEW_MCE is enabled. Machine check
events are errors reported by the CPU. Processing them is strongly encouraged.
All x86-64 kernels since 2.6.4 require the mcelog utility to
process machine checks.
On x86 kernels the mcelog utility is needed to process and log machine check
events when CONFIG_X86_MCE is enabled. Machine check events are errors reported
by the CPU. Processing them is strongly encouraged.
Getting updated software
========================

View File

@ -708,7 +708,7 @@ hardware level details could be very different.
<para>Systems need specialized hardware support to implement OTG,
notably including a special <emphasis>Mini-AB</emphasis> jack
and associated transciever to support <emphasis>Dual-Role</emphasis>
and associated transceiver to support <emphasis>Dual-Role</emphasis>
operation:
they can act either as a host, using the standard
Linux-USB host side driver stack,

View File

@ -182,7 +182,7 @@
<para>
Each interrupt is described by an interrupt descriptor structure
irq_desc. The interrupt is referenced by an 'unsigned int' numeric
value which selects the corresponding interrupt decription structure
value which selects the corresponding interrupt description structure
in the descriptor structures array.
The descriptor structure contains status information and pointers
to the interrupt flow method and the interrupt chip structure
@ -470,7 +470,7 @@ if (desc->irq_data.chip->irq_eoi)
<para>
To avoid copies of identical implementations of IRQ chips the
core provides a configurable generic interrupt chip
implementation. Developers should check carefuly whether the
implementation. Developers should check carefully whether the
generic chip fits their needs before implementing the same
functionality slightly differently themselves.
</para>

View File

@ -1760,7 +1760,7 @@ as it would be on UP.
</para>
<para>
There is a furthur optimization possible here: remember our original
There is a further optimization possible here: remember our original
cache code, where there were no reference counts and the caller simply
held the lock whenever using the object? This is still possible: if
you hold the lock, no one can delete the object, so you don't need to

View File

@ -677,7 +677,7 @@ and other resources, etc.
<listitem>
<para>
ATA_QCFLAG_ACTIVE is clared from qc->flags.
ATA_QCFLAG_ACTIVE is cleared from qc->flags.
</para>
</listitem>
@ -708,7 +708,7 @@ and other resources, etc.
<listitem>
<para>
qc->waiting is claread &amp; completed (in that order).
qc->waiting is cleared &amp; completed (in that order).
</para>
</listitem>
@ -1163,7 +1163,7 @@ and other resources, etc.
<para>
Once sense data is acquired, this type of errors can be
handled similary to other SCSI errors. Note that sense data
handled similarly to other SCSI errors. Note that sense data
may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR
&amp;&amp; ASC/ASCQ 47h/00h SCSI PARITY ERROR). In such
cases, the error should be considered as an ATA bus error and

View File

@ -202,8 +202,8 @@ $(MEDIA_OBJ_DIR)/%: $(MEDIA_SRC_DIR)/%.b64
$(MEDIA_OBJ_DIR)/v4l2.xml: $(OBJIMGFILES)
@$($(quiet)gen_xml)
@(ln -sf $(MEDIA_SRC_DIR)/v4l/*xml $(MEDIA_OBJ_DIR)/)
@(ln -sf $(MEDIA_SRC_DIR)/dvb/*xml $(MEDIA_OBJ_DIR)/)
@(ln -sf `cd $(MEDIA_SRC_DIR) && /bin/pwd`/v4l/*xml $(MEDIA_OBJ_DIR)/)
@(ln -sf `cd $(MEDIA_SRC_DIR) && /bin/pwd`/dvb/*xml $(MEDIA_OBJ_DIR)/)
$(MEDIA_OBJ_DIR)/videodev2.h.xml: $(srctree)/include/uapi/linux/videodev2.h $(MEDIA_OBJ_DIR)/v4l2.xml
@$($(quiet)gen_xml)

View File

@ -68,7 +68,7 @@
several digital tv standards. While it is called as DVB API,
in fact it covers several different video standards including
DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated
to documment support also for DVB-S2, ISDB-T and ISDB-S.</para>
to document support also for DVB-S2, ISDB-T and ISDB-S.</para>
<para>The third part covers the Remote Controller API.</para>
<para>The fourth part covers the Media Controller API.</para>
<para>For additional information and for the latest development code,

View File

@ -91,7 +91,7 @@
<listitem><para>
[MTD Interface]</para><para>
These functions provide the interface to the MTD kernel API.
They are not replacable and provide functionality
They are not replaceable and provide functionality
which is complete hardware independent.
</para></listitem>
<listitem><para>
@ -100,14 +100,14 @@
</para></listitem>
<listitem><para>
[GENERIC]</para><para>
Generic functions are not replacable and provide functionality
Generic functions are not replaceable and provide functionality
which is complete hardware independent.
</para></listitem>
<listitem><para>
[DEFAULT]</para><para>
Default functions provide hardware related functionality which is suitable
for most of the implementations. These functions can be replaced by the
board driver if neccecary. Those functions are called via pointers in the
board driver if necessary. Those functions are called via pointers in the
NAND chip description structure. The board driver can set the functions which
should be replaced by board dependent functions before calling nand_scan().
If the function pointer is NULL on entry to nand_scan() then the pointer
@ -264,7 +264,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd)
is set up nand_scan() is called. This function tries to
detect and identify then chip. If a chip is found all the
internal data fields are initialized accordingly.
The structure(s) have to be zeroed out first and then filled with the neccecary
The structure(s) have to be zeroed out first and then filled with the necessary
information about the device.
</para>
<programlisting>
@ -327,7 +327,7 @@ module_init(board_init);
<sect1 id="Exit_function">
<title>Exit function</title>
<para>
The exit function is only neccecary if the driver is
The exit function is only necessary if the driver is
compiled as a module. It releases all resources which
are held by the chip driver and unregisters the partitions
in the MTD layer.
@ -494,7 +494,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
in this case. See rts_from4.c and diskonchip.c for
implementation reference. In those cases we must also
use bad block tables on FLASH, because the ECC layout is
interferring with the bad block marker positions.
interfering with the bad block marker positions.
See bad block table support for details.
</para>
</sect2>
@ -542,7 +542,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
<para>
nand_scan() calls the function nand_default_bbt().
nand_default_bbt() selects appropriate default
bad block table desriptors depending on the chip information
bad block table descriptors depending on the chip information
which was retrieved by nand_scan().
</para>
<para>
@ -554,7 +554,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
<sect2 id="Flash_based_tables">
<title>Flash based tables</title>
<para>
It may be desired or neccecary to keep a bad block table in FLASH.
It may be desired or necessary to keep a bad block table in FLASH.
For AG-AND chips this is mandatory, as they have no factory marked
bad blocks. They have factory marked good blocks. The marker pattern
is erased when the block is erased to be reused. So in case of
@ -565,10 +565,10 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
of the blocks.
</para>
<para>
The blocks in which the tables are stored are procteted against
The blocks in which the tables are stored are protected against
accidental access by marking them bad in the memory bad block
table. The bad block table management functions are allowed
to circumvernt this protection.
to circumvent this protection.
</para>
<para>
The simplest way to activate the FLASH based bad block table support
@ -592,7 +592,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
User defined tables are created by filling out a
nand_bbt_descr structure and storing the pointer in the
nand_chip structure member bbt_td before calling nand_scan().
If a mirror table is neccecary a second structure must be
If a mirror table is necessary a second structure must be
created and a pointer to this structure must be stored
in bbt_md inside the nand_chip structure. If the bbt_md
member is set to NULL then only the main table is used
@ -666,7 +666,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
<para>
For automatic placement some blocks must be reserved for
bad block table storage. The number of reserved blocks is defined
in the maxblocks member of the babd block table description structure.
in the maxblocks member of the bad block table description structure.
Reserving 4 blocks for mirrored tables should be a reasonable number.
This also limits the number of blocks which are scanned for the bad
block table ident pattern.
@ -1068,11 +1068,11 @@ in this page</entry>
<chapter id="filesystems">
<title>Filesystem support</title>
<para>
The NAND driver provides all neccecary functions for a
The NAND driver provides all necessary functions for a
filesystem via the MTD interface.
</para>
<para>
Filesystems must be aware of the NAND pecularities and
Filesystems must be aware of the NAND peculiarities and
restrictions. One major restrictions of NAND Flash is, that you cannot
write as often as you want to a page. The consecutive writes to a page,
before erasing it again, are restricted to 1-3 writes, depending on the
@ -1222,7 +1222,7 @@ in this page</entry>
#define NAND_BBT_VERSION 0x00000100
/* Create a bbt if none axists */
#define NAND_BBT_CREATE 0x00000200
/* Write bbt if neccecary */
/* Write bbt if necessary */
#define NAND_BBT_WRITE 0x00001000
/* Read and write back block contents when writing bbt */
#define NAND_BBT_SAVECONTENT 0x00002000

View File

@ -155,7 +155,7 @@
release regulators. Functions are
provided to <link linkend='API-regulator-enable'>enable</link>
and <link linkend='API-regulator-disable'>disable</link> the
reguator and to get and set the runtime parameters of the
regulator and to get and set the runtime parameters of the
regulator.
</para>
<para>

View File

@ -766,10 +766,10 @@ framework to set up sysfs files for this region. Simply leave it alone.
<para>
The dynamic memory regions will be allocated when the UIO device file,
<varname>/dev/uioX</varname> is opened.
Simiar to static memory resources, the memory region information for
Similar to static memory resources, the memory region information for
dynamic regions is then visible via sysfs at
<varname>/sys/class/uio/uioX/maps/mapY/*</varname>.
The dynmaic memory regions will be freed when the UIO device file is
The dynamic memory regions will be freed when the UIO device file is
closed. When no processes are holding the device file open, the address
returned to userspace is ~0.
</para>

View File

@ -153,7 +153,7 @@
<listitem><para>The Linux USB API supports synchronous calls for
control and bulk messages.
It also supports asynchnous calls for all kinds of data transfer,
It also supports asynchronous calls for all kinds of data transfer,
using request structures called "URBs" (USB Request Blocks).
</para></listitem>

View File

@ -5696,7 +5696,7 @@ struct _snd_pcm_runtime {
suspending the PCM operations via
<function>snd_pcm_suspend_all()</function> or
<function>snd_pcm_suspend()</function>. It means that the PCM
streams are already stoppped when the register snapshot is
streams are already stopped when the register snapshot is
taken. But, remember that you don't have to restart the PCM
stream in the resume callback. It'll be restarted via
trigger call with <constant>SNDRV_PCM_TRIGGER_RESUME</constant>

View File

@ -314,6 +314,7 @@ int main(int argc, char *argv[])
break;
case 'm':
strncpy(cpumask, optarg, sizeof(cpumask));
cpumask[sizeof(cpumask) - 1] = '\0';
maskset = 1;
printf("cpumask %s maskset %d\n", cpumask, maskset);
break;

View File

@ -15,10 +15,13 @@ New sysfs files for controlling P state selection have been added to
/sys/devices/system/cpu/intel_pstate/
max_perf_pct: limits the maximum P state that will be requested by
the driver stated as a percentage of the available performance.
the driver stated as a percentage of the available performance. The
available (P states) performance may be reduced by the no_turbo
setting described below.
min_perf_pct: limits the minimum P state that will be requested by
the driver stated as a percentage of the available performance.
the driver stated as a percentage of the max (non-turbo)
performance level.
no_turbo: limits the driver to selecting P states below the turbo
frequency range.

View File

@ -6,5 +6,15 @@ following property:
Required root node property:
- compatible: must contain either "marvell,armada380" or
"marvell,armada385" depending on the variant of the SoC being used.
- compatible: must contain "marvell,armada380"
In addition, boards using the Marvell Armada 385 SoC shall have the
following property before the previous one:
Required root node property:
compatible: must contain "marvell,armada385"
Example:
compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";

View File

@ -9,6 +9,18 @@ Required Properties:
- reg: physical base address of the controller and length of memory mapped
region.
Optional Properties:
- clocks: List of clock handles. The parent clocks of the input clocks to the
devices in this power domain are set to oscclk before power gating
and restored back after powering on a domain. This is required for
all domains which are powered on and off and not required for unused
domains.
- clock-names: The following clocks can be specified:
- oscclk: Oscillator clock.
- pclkN, clkN: Pairs of parent of input clock and input clock to the
devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
are supported currently.
Node of a device using power domains must have a samsung,power-domain property
defined with a phandle to respective power domain.
@ -19,6 +31,14 @@ Example:
reg = <0x10023C00 0x10>;
};
mfc_pd: power-domain@10044060 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044060 0x20>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
<&clock CLK_MOUT_USER_ACLK333>;
clock-names = "oscclk", "pclk0", "clk0";
};
Example of the node using power domain:
node {

View File

@ -40,6 +40,9 @@ Optional properties:
- arm,filter-ranges : <start length> Starting address and length of window to
filter. Addresses in the filter window are directed to the M1 port. Other
addresses will go to the M0 port.
- arm,io-coherent : indicates that the system is operating in an hardware
I/O coherent mode. Valid only when the arm,pl310-cache compatible
string is used.
- interrupts : 1 combined interrupt.
- cache-id-part: cache id part number to be used if it is not present
on hardware

View File

@ -48,7 +48,7 @@ adc@12D10000 {
/* NTC thermistor is a hwmon device */
ncp15wb473@0 {
compatible = "ntc,ncp15wb473";
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;

View File

@ -3,11 +3,19 @@ NTC Thermistor hwmon sensors
Requires node properties:
- "compatible" value : one of
"ntc,ncp15wb473"
"ntc,ncp18wb473"
"ntc,ncp21wb473"
"ntc,ncp03wb473"
"ntc,ncp15wl333"
"murata,ncp15wb473"
"murata,ncp18wb473"
"murata,ncp21wb473"
"murata,ncp03wb473"
"murata,ncp15wl333"
/* Usage of vendor name "ntc" is deprecated */
<DEPRECATED> "ntc,ncp15wb473"
<DEPRECATED> "ntc,ncp18wb473"
<DEPRECATED> "ntc,ncp21wb473"
<DEPRECATED> "ntc,ncp03wb473"
<DEPRECATED> "ntc,ncp15wl333"
- "pullup-uv" Pull up voltage in micro volts
- "pullup-ohm" Pull up resistor value in ohms
- "pulldown-ohm" Pull down resistor value in ohms
@ -21,7 +29,7 @@ Read more about iio bindings at
Example:
ncp15wb473@0 {
compatible = "ntc,ncp15wb473";
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;

View File

@ -0,0 +1,42 @@
* Rockchip RK3xxx I2C controller
This driver interfaces with the native I2C controller present in Rockchip
RK3xxx SoCs.
Required properties :
- reg : Offset and length of the register set for the device
- compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c" or
"rockchip,rk3288-i2c".
- interrupts : interrupt number
- clocks : parent clock
Required on RK3066, RK3188 :
- rockchip,grf : the phandle of the syscon node for the general register
file (GRF)
- on those SoCs an alias with the correct I2C bus ID (bit offset in the GRF)
is also required.
Optional properties :
- clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used.
Example:
aliases {
i2c0 = &i2c0;
}
i2c0: i2c@2002d000 {
compatible = "rockchip,rk3188-i2c";
reg = <0x2002d000 0x1000>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
rockchip,grf = <&grf>;
clock-names = "i2c";
clocks = <&cru PCLK_I2C0>;
};

View File

@ -0,0 +1,41 @@
* Allwinner P2WI (Push/Pull 2 Wire Interface) controller
Required properties :
- reg : Offset and length of the register set for the device.
- compatible : Should one of the following:
- "allwinner,sun6i-a31-p2wi"
- interrupts : The interrupt line connected to the P2WI peripheral.
- clocks : The gate clk connected to the P2WI peripheral.
- resets : The reset line connected to the P2WI peripheral.
Optional properties :
- clock-frequency : Desired P2WI bus clock frequency in Hz. If not set the
default frequency is 100kHz
A P2WI may contain one child node encoding a P2WI slave device.
Slave device properties:
Required properties:
- reg : the I2C slave address used during the initialization
process to switch from I2C to P2WI mode
Example:
p2wi@01f03400 {
compatible = "allwinner,sun6i-a31-p2wi";
reg = <0x01f03400 0x400>;
interrupts = <0 39 4>;
clocks = <&apb0_gates 3>;
clock-frequency = <6000000>;
resets = <&apb0_rst 3>;
axp221: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
/* ... */
};
};

View File

@ -4,6 +4,13 @@ Required properties:
- compatible: Must contain one of the following:
- "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
- "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART.
- "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART.
- "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART.
- "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART.
- "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART.
- "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
- "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
- "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
- "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.

View File

@ -23,6 +23,12 @@ Optional properties:
- spi-max-frequency: Specifies maximum SPI clock frequency,
Units - Hz. Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
- num-cs: total number of chipselects
- cs-gpios: should specify GPIOs used for chipselects.
The gpios will be referred to as reg = <index> in the SPI child
nodes. If unspecified, a single SPI device without a chip
select can be used.
SPI slave nodes must be children of the SPI master node and can contain
properties described in Documentation/devicetree/bindings/spi/spi-bus.txt

View File

@ -83,6 +83,7 @@ mosaixtech Mosaix Technologies, Inc.
moxa Moxa
mpl MPL AG
mundoreader Mundo Reader S.L.
murata Murata Manufacturing Co., Ltd.
mxicy Macronix International Co., Ltd.
national National Semiconductor
neonode Neonode Inc.

View File

@ -1,6 +1,17 @@
Email clients info for Linux
======================================================================
Git
----------------------------------------------------------------------
These days most developers use `git send-email` instead of regular
email clients. The man page for this is quite good. On the receiving
end, maintainers use `git am` to apply the patches.
If you are new to git then send your first patch to yourself. Save it
as raw text including all the headers. Run `git am raw_email.txt` and
then review the changelog with `git log`. When that works then send
the patch to the appropriate mailing list(s).
General Preferences
----------------------------------------------------------------------
Patches for the Linux kernel are submitted via email, preferably as

View File

@ -1,7 +1,7 @@
Kernel driver ntc_thermistor
=================
Supported thermistors:
Supported thermistors from Murata:
* Murata NTC Thermistors NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333
Prefixes: 'ncp15wb473', 'ncp18wb473', 'ncp21wb473', 'ncp03wb473', 'ncp15wl333'
Datasheet: Publicly available at Murata
@ -15,9 +15,9 @@ Authors:
Description
-----------
The NTC thermistor is a simple thermistor that requires users to provide the
resistance and lookup the corresponding compensation table to get the
temperature input.
The NTC (Negative Temperature Coefficient) thermistor is a simple thermistor
that requires users to provide the resistance and lookup the corresponding
compensation table to get the temperature input.
The NTC driver provides lookup tables with a linear approximation function
and four circuit models with an option not to use any of the four models.

View File

@ -1171,7 +1171,7 @@ When kbuild executes, the following steps are followed (roughly):
obvious reason.
dtc
Create flattend device tree blob object suitable for linking
Create flattened device tree blob object suitable for linking
into vmlinux. Device tree blobs linked into vmlinux are placed
in an init section in the image. Platform code *must* copy the
blob to non-init memory prior to calling unflatten_device_tree().

View File

@ -1474,6 +1474,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
js= [HW,JOY] Analog joystick
See Documentation/input/joystick.txt.
kaslr/nokaslr [X86]
Enable/disable kernel and module base offset ASLR
(Address Space Layout Randomization) if built into
the kernel. When CONFIG_HIBERNATION is selected,
kASLR is disabled by default. When kASLR is enabled,
hibernation will be disabled.
keepinitrd [HW,ARM]
kernelcore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter
@ -2110,10 +2117,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
noapic [SMP,APIC] Tells the kernel to not make use of any
IOAPICs that may be present in the system.
nokaslr [X86]
Disable kernel and module base offset ASLR (Address
Space Layout Randomization) if built into the kernel.
noautogroup Disable scheduler automatic task group creation.
nobats [PPC] Do not use BATs for mapping kernel lowmem
@ -2184,6 +2187,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
in certain environments such as networked servers or
real-time systems.
nohibernate [HIBERNATION] Disable hibernation and resume.
nohz= [KNL] Boottime enable/disable dynamic ticks
Valid arguments: on, off
Default: on
@ -2980,6 +2985,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
noresume Don't check if there's a hibernation image
present during boot.
nocompress Don't compress/decompress hibernation images.
no Disable hibernation and resume.
retain_initrd [RAM] Keep initrd memory after extraction
@ -3124,6 +3130,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
[KNL] Should the soft-lockup detector generate panics.
Format: <integer>
softlockup_all_cpu_backtrace=
[KNL] Should the soft-lockup detector generate
backtraces on all cpus.
Format: <integer>
sonypi.*= [HW] Sony Programmable I/O Control Device driver
See Documentation/laptops/sonypi.txt

View File

@ -8,8 +8,8 @@ disk-shock-protection.txt
- information on hard disk shock protection.
dslm.c
- Simple Disk Sleep Monitor program
hpfall.c
- (HP) laptop accelerometer program for disk protection.
freefall.c
- (HP/DELL) laptop accelerometer program for disk protection.
laptop-mode.txt
- how to conserve battery power using laptop-mode.
sony-laptop.txt

View File

@ -1,7 +1,9 @@
/* Disk protection for HP machines.
/* Disk protection for HP/DELL machines.
*
* Copyright 2008 Eric Piel
* Copyright 2009 Pavel Machek <pavel@ucw.cz>
* Copyright 2012 Sonal Santan
* Copyright 2014 Pali Rohár <pali.rohar@gmail.com>
*
* GPLv2.
*/
@ -18,24 +20,31 @@
#include <signal.h>
#include <sys/mman.h>
#include <sched.h>
#include <syslog.h>
char unload_heads_path[64];
static int noled;
static char unload_heads_path[64];
static char device_path[32];
static const char app_name[] = "FREE FALL";
int set_unload_heads_path(char *device)
static int set_unload_heads_path(char *device)
{
char devname[64];
if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0)
return -EINVAL;
strncpy(devname, device + 5, sizeof(devname));
strncpy(devname, device + 5, sizeof(devname) - 1);
strncpy(device_path, device, sizeof(device_path) - 1);
snprintf(unload_heads_path, sizeof(unload_heads_path) - 1,
"/sys/block/%s/device/unload_heads", devname);
return 0;
}
int valid_disk(void)
static int valid_disk(void)
{
int fd = open(unload_heads_path, O_RDONLY);
if (fd < 0) {
perror(unload_heads_path);
return 0;
@ -45,43 +54,54 @@ int valid_disk(void)
return 1;
}
void write_int(char *path, int i)
static void write_int(char *path, int i)
{
char buf[1024];
int fd = open(path, O_RDWR);
if (fd < 0) {
perror("open");
exit(1);
}
sprintf(buf, "%d", i);
if (write(fd, buf, strlen(buf)) != strlen(buf)) {
perror("write");
exit(1);
}
close(fd);
}
void set_led(int on)
static void set_led(int on)
{
if (noled)
return;
write_int("/sys/class/leds/hp::hddprotect/brightness", on);
}
void protect(int seconds)
static void protect(int seconds)
{
const char *str = (seconds == 0) ? "Unparked" : "Parked";
write_int(unload_heads_path, seconds*1000);
syslog(LOG_INFO, "%s %s disk head\n", str, device_path);
}
int on_ac(void)
static int on_ac(void)
{
// /sys/class/power_supply/AC0/online
/* /sys/class/power_supply/AC0/online */
return 1;
}
int lid_open(void)
static int lid_open(void)
{
// /proc/acpi/button/lid/LID/state
/* /proc/acpi/button/lid/LID/state */
return 1;
}
void ignore_me(void)
static void ignore_me(int signum)
{
protect(0);
set_led(0);
@ -90,6 +110,7 @@ void ignore_me(void)
int main(int argc, char **argv)
{
int fd, ret;
struct stat st;
struct sched_param param;
if (argc == 1)
@ -111,7 +132,16 @@ int main(int argc, char **argv)
return EXIT_FAILURE;
}
daemon(0, 0);
if (stat("/sys/class/leds/hp::hddprotect/brightness", &st))
noled = 1;
if (daemon(0, 0) != 0) {
perror("daemon");
return EXIT_FAILURE;
}
openlog(app_name, LOG_CONS | LOG_PID | LOG_NDELAY, LOG_LOCAL1);
param.sched_priority = sched_get_priority_max(SCHED_FIFO);
sched_setscheduler(0, SCHED_FIFO, &param);
mlockall(MCL_CURRENT|MCL_FUTURE);
@ -141,6 +171,7 @@ int main(int argc, char **argv)
alarm(20);
}
closelog();
close(fd);
return EXIT_SUCCESS;
}

View File

@ -209,15 +209,12 @@ If memory device is found, memory hotplug code will be called.
4.2 Notify memory hot-add event by hand
------------
On powerpc, the firmware does not notify a memory hotplug event to the kernel.
Therefore, "probe" interface is supported to notify the event to the kernel.
This interface depends on CONFIG_ARCH_MEMORY_PROBE.
CONFIG_ARCH_MEMORY_PROBE is supported on powerpc only. On x86, this config
option is disabled by default since ACPI notifies a memory hotplug event to
the kernel, which performs its hotplug operation as the result. Please
enable this option if you need the "probe" interface for testing purposes
on x86.
On some architectures, the firmware may not notify the kernel of a memory
hotplug event. Therefore, the memory "probe" interface is supported to
explicitly notify the kernel. This interface depends on
CONFIG_ARCH_MEMORY_PROBE and can be configured on powerpc, sh, and x86
if hotplug is supported, although for x86 this should be handled by ACPI
notification.
Probe interface is located at
/sys/devices/system/memory/probe

View File

@ -17,6 +17,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define _GNU_SOURCE
#include <errno.h>
#include <fcntl.h>
#include <inttypes.h>
@ -46,12 +47,14 @@
#define CLOCK_INVALID -1
#endif
/* When glibc offers the syscall, this will go away. */
/* clock_adjtime is not available in GLIBC < 2.14 */
#if !__GLIBC_PREREQ(2, 14)
#include <sys/syscall.h>
static int clock_adjtime(clockid_t id, struct timex *tx)
{
return syscall(__NR_clock_adjtime, id, tx);
}
#endif
static clockid_t get_clockid(int fd)
{

View File

@ -286,6 +286,11 @@ STAC92HD83*
hp-inv-led HP with broken BIOS for inverted mute LED
auto BIOS setup (default)
STAC92HD95
==========
hp-led LED support for HP laptops
hp-bass Bass HPF setup for HP Spectre 13
STAC9872
========
vaio VAIO laptop without SPDIF

View File

@ -75,6 +75,7 @@ show up in /proc/sys/kernel:
- shmall
- shmmax [ sysv ipc ]
- shmmni
- softlockup_all_cpu_backtrace
- stop-a [ SPARC only ]
- sysrq ==> Documentation/sysrq.txt
- sysctl_writes_strict
@ -783,6 +784,22 @@ via the /proc/sys interface:
==============================================================
softlockup_all_cpu_backtrace:
This value controls the soft lockup detector thread's behavior
when a soft lockup condition is detected as to whether or not
to gather further debug information. If enabled, each cpu will
be issued an NMI and instructed to capture stack trace.
This feature is only applicable for architectures which support
NMI.
0: do nothing. This is the default behavior.
1: on detection capture more debug information.
==============================================================
tainted:
Non-zero if the kernel has been tainted. Numeric values, which

View File

@ -702,7 +702,8 @@ The batch value of each per cpu pagelist is also updated as a result. It is
set to pcp->high/4. The upper limit of batch is (PAGE_SHIFT * 8)
The initial value is zero. Kernel does not use this value at boot time to set
the high water marks for each per cpu page list.
the high water marks for each per cpu page list. If the user writes '0' to this
sysctl, it will revert to this default behavior.
==============================================================

View File

@ -4,7 +4,7 @@ Kernel driver nouveau
Supported chips:
* NV43+
Authors: Martin Peres (mupuf) <martin.peres@labri.fr>
Authors: Martin Peres (mupuf) <martin.peres@free.fr>
Description
---------
@ -68,8 +68,9 @@ Your fan can be driven in different modes:
NOTE: Be sure to use the manual mode if you want to drive the fan speed manually
NOTE2: Not all fan management modes may be supported on all chipsets. We are
working on it.
NOTE2: When operating in manual mode outside the vbios-defined
[PWM_min, PWM_max] range, the reported fan speed (RPM) may not be accurate
depending on your hardware.
Bug reports
---------

View File

@ -47,7 +47,6 @@ use constant HIGH_KSWAPD_REWAKEUP => 21;
use constant HIGH_NR_SCANNED => 22;
use constant HIGH_NR_TAKEN => 23;
use constant HIGH_NR_RECLAIMED => 24;
use constant HIGH_NR_CONTIG_DIRTY => 25;
my %perprocesspid;
my %perprocess;
@ -105,7 +104,7 @@ my $regex_direct_end_default = 'nr_reclaimed=([0-9]*)';
my $regex_kswapd_wake_default = 'nid=([0-9]*) order=([0-9]*)';
my $regex_kswapd_sleep_default = 'nid=([0-9]*)';
my $regex_wakeup_kswapd_default = 'nid=([0-9]*) zid=([0-9]*) order=([0-9]*)';
my $regex_lru_isolate_default = 'isolate_mode=([0-9]*) order=([0-9]*) nr_requested=([0-9]*) nr_scanned=([0-9]*) nr_taken=([0-9]*) contig_taken=([0-9]*) contig_dirty=([0-9]*) contig_failed=([0-9]*)';
my $regex_lru_isolate_default = 'isolate_mode=([0-9]*) order=([0-9]*) nr_requested=([0-9]*) nr_scanned=([0-9]*) nr_taken=([0-9]*) file=([0-9]*)';
my $regex_lru_shrink_inactive_default = 'nid=([0-9]*) zid=([0-9]*) nr_scanned=([0-9]*) nr_reclaimed=([0-9]*) priority=([0-9]*) flags=([A-Z_|]*)';
my $regex_lru_shrink_active_default = 'lru=([A-Z_]*) nr_scanned=([0-9]*) nr_rotated=([0-9]*) priority=([0-9]*)';
my $regex_writepage_default = 'page=([0-9a-f]*) pfn=([0-9]*) flags=([A-Z_|]*)';
@ -200,7 +199,7 @@ $regex_lru_isolate = generate_traceevent_regex(
$regex_lru_isolate_default,
"isolate_mode", "order",
"nr_requested", "nr_scanned", "nr_taken",
"contig_taken", "contig_dirty", "contig_failed");
"file");
$regex_lru_shrink_inactive = generate_traceevent_regex(
"vmscan/mm_vmscan_lru_shrink_inactive",
$regex_lru_shrink_inactive_default,
@ -375,7 +374,6 @@ EVENT_PROCESS:
}
my $isolate_mode = $1;
my $nr_scanned = $4;
my $nr_contig_dirty = $7;
# To closer match vmstat scanning statistics, only count isolate_both
# and isolate_inactive as scanning. isolate_active is rotation
@ -385,7 +383,6 @@ EVENT_PROCESS:
if ($isolate_mode != 2) {
$perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
}
$perprocesspid{$process_pid}->{HIGH_NR_CONTIG_DIRTY} += $nr_contig_dirty;
} elsif ($tracepoint eq "mm_vmscan_lru_shrink_inactive") {
$details = $6;
if ($details !~ /$regex_lru_shrink_inactive/o) {
@ -539,13 +536,6 @@ sub dump_stats {
}
}
}
if ($stats{$process_pid}->{HIGH_NR_CONTIG_DIRTY}) {
print " ";
my $count = $stats{$process_pid}->{HIGH_NR_CONTIG_DIRTY};
if ($count != 0) {
print "contig-dirty=$count ";
}
}
print "\n";
}

View File

@ -943,16 +943,10 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
F: arch/arm/mach-imx/
F: arch/arm/mach-mxs/
F: arch/arm/boot/dts/imx*
F: arch/arm/configs/imx*_defconfig
ARM/FREESCALE MXS ARM ARCHITECTURE
M: Shawn Guo <shawn.guo@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
F: arch/arm/mach-mxs/
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -1052,9 +1046,33 @@ M: Santosh Shilimkar <santosh.shilimkar@ti.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-keystone/
F: drivers/clk/keystone/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/clk/keystone/
ARM/TEXAS INSTRUMENT KEYSTONE ClOCKSOURCE
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/clocksource/timer-keystone.c
ARM/TEXAS INSTRUMENT KEYSTONE RESET DRIVER
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/power/reset/keystone-reset.c
ARM/TEXAS INSTRUMENT AEMIF/EMIF DRIVERS
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/memory/*emif*
ARM/LOGICPD PXA270 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -1296,6 +1314,20 @@ W: http://oss.renesas.com
Q: http://patchwork.kernel.org/project/linux-sh/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
S: Supported
F: arch/arm/boot/dts/emev2*
F: arch/arm/boot/dts/r7s*
F: arch/arm/boot/dts/r8a*
F: arch/arm/boot/dts/sh*
F: arch/arm/configs/ape6evm_defconfig
F: arch/arm/configs/armadillo800eva_defconfig
F: arch/arm/configs/bockw_defconfig
F: arch/arm/configs/genmai_defconfig
F: arch/arm/configs/koelsch_defconfig
F: arch/arm/configs/kzm9g_defconfig
F: arch/arm/configs/lager_defconfig
F: arch/arm/configs/mackerel_defconfig
F: arch/arm/configs/marzen_defconfig
F: arch/arm/configs/shmobile_defconfig
F: arch/arm/mach-shmobile/
F: drivers/sh/
@ -2917,6 +2949,9 @@ L: linux-doc@vger.kernel.org
T: quilt http://www.infradead.org/~rdunlap/Doc/patches/
S: Maintained
F: Documentation/
X: Documentation/ABI/
X: Documentation/devicetree/
X: Documentation/[a-z][a-z]_[A-Z][A-Z]/
DOUBLETALK DRIVER
M: "James R. Van Zandt" <jrv@vanzandt.mv.com>
@ -3189,14 +3224,6 @@ L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/eata_pio.*
EBTABLES
L: netfilter-devel@vger.kernel.org
W: http://ebtables.sourceforge.net/
S: Orphan
F: include/linux/netfilter_bridge/ebt_*.h
F: include/uapi/linux/netfilter_bridge/ebt_*.h
F: net/bridge/netfilter/ebt*.c
EC100 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
L: linux-media@vger.kernel.org
@ -5517,10 +5544,11 @@ S: Maintained
F: arch/arm/mach-lpc32xx/
LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
M: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com>
M: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
M: support@lsi.com
L: DL-MPTFusionLinux@lsi.com
M: Nagalakshmi Nandigama <nagalakshmi.nandigama@avagotech.com>
M: Praveen Krishnamoorthy <praveen.krishnamoorthy@avagotech.com>
M: Sreekanth Reddy <sreekanth.reddy@avagotech.com>
M: Abhijit Mahajan <abhijit.mahajan@avagotech.com>
L: MPT-FusionLinux.pdl@avagotech.com
L: linux-scsi@vger.kernel.org
W: http://www.lsilogic.com/support
S: Supported
@ -6105,12 +6133,11 @@ F: Documentation/networking/s2io.txt
F: Documentation/networking/vxge.txt
F: drivers/net/ethernet/neterion/
NETFILTER/IPTABLES
NETFILTER ({IP,IP6,ARP,EB,NF}TABLES)
M: Pablo Neira Ayuso <pablo@netfilter.org>
M: Patrick McHardy <kaber@trash.net>
M: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
L: netfilter-devel@vger.kernel.org
L: netfilter@vger.kernel.org
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
@ -6774,7 +6801,7 @@ F: arch/x86/kernel/quirks.c
PCI DRIVER FOR IMX6
M: Richard Zhu <r65037@freescale.com>
M: Shawn Guo <shawn.guo@linaro.org>
M: Shawn Guo <shawn.guo@freescale.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
@ -6960,7 +6987,7 @@ PKUNITY SOC DRIVERS
M: Guan Xuetao <gxt@mprc.pku.edu.cn>
W: http://mprc.pku.edu.cn/~guanxuetao/linux
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32.git
T: git git://github.com/gxt/linux.git
F: drivers/input/serio/i8042-unicore32io.h
F: drivers/i2c/busses/i2c-puv3.c
F: drivers/video/fb-puv3.c
@ -7948,6 +7975,7 @@ F: drivers/mmc/host/sdhci-spear.c
SECURITY SUBSYSTEM
M: James Morris <james.l.morris@oracle.com>
M: Serge E. Hallyn <serge@hallyn.com>
L: linux-security-module@vger.kernel.org (suggested Cc:)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git
W: http://kernsec.org/
@ -8195,13 +8223,15 @@ S: Maintained
F: drivers/usb/misc/sisusbvga/
SLAB ALLOCATOR
M: Christoph Lameter <cl@linux-foundation.org>
M: Christoph Lameter <cl@linux.com>
M: Pekka Enberg <penberg@kernel.org>
M: Matt Mackall <mpm@selenic.com>
M: David Rientjes <rientjes@google.com>
M: Joonsoo Kim <iamjoonsoo.kim@lge.com>
M: Andrew Morton <akpm@linux-foundation.org>
L: linux-mm@kvack.org
S: Maintained
F: include/linux/sl?b*.h
F: mm/sl?b.c
F: mm/sl?b*
SLEEPABLE READ-COPY UPDATE (SRCU)
M: Lai Jiangshan <laijs@cn.fujitsu.com>
@ -8968,7 +8998,7 @@ F: drivers/media/radio/radio-raremono.c
THERMAL
M: Zhang Rui <rui.zhang@intel.com>
M: Eduardo Valentin <eduardo.valentin@ti.com>
M: Eduardo Valentin <edubezval@gmail.com>
L: linux-pm@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
@ -8995,7 +9025,7 @@ S: Maintained
F: drivers/platform/x86/thinkpad_acpi.c
TI BANDGAP AND THERMAL DRIVER
M: Eduardo Valentin <eduardo.valentin@ti.com>
M: Eduardo Valentin <edubezval@gmail.com>
L: linux-pm@vger.kernel.org
S: Supported
F: drivers/thermal/ti-soc-thermal/
@ -9276,7 +9306,7 @@ UNICORE32 ARCHITECTURE:
M: Guan Xuetao <gxt@mprc.pku.edu.cn>
W: http://mprc.pku.edu.cn/~guanxuetao/linux
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32.git
T: git git://github.com/gxt/linux.git
F: arch/unicore32/
UNIFDEF
@ -9409,12 +9439,6 @@ S: Maintained
F: drivers/usb/host/isp116x*
F: include/linux/usb/isp116x.h
USB KAWASAKI LSI DRIVER
M: Oliver Neukum <oliver@neukum.org>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/kl5kusb105.*
USB MASS STORAGE DRIVER
M: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
L: linux-usb@vger.kernel.org
@ -9442,12 +9466,6 @@ S: Maintained
F: Documentation/usb/ohci.txt
F: drivers/usb/host/ohci*
USB OPTION-CARD DRIVER
M: Matthias Urlichs <smurf@smurf.noris.de>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/option.c
USB PEGASUS DRIVER
M: Petko Manolov <petkan@nucleusys.com>
L: linux-usb@vger.kernel.org
@ -9480,7 +9498,7 @@ S: Maintained
F: drivers/net/usb/rtl8150.c
USB SERIAL SUBSYSTEM
M: Johan Hovold <jhovold@gmail.com>
M: Johan Hovold <johan@kernel.org>
L: linux-usb@vger.kernel.org
S: Maintained
F: Documentation/usb/usb-serial.txt
@ -9734,6 +9752,14 @@ L: virtualization@lists.linux-foundation.org
S: Supported
F: arch/x86/kernel/cpu/vmware.c
VMWARE BALLOON DRIVER
M: Xavier Deguillard <xdeguillard@vmware.com>
M: Philip Moltmann <moltmann@vmware.com>
M: "VMware, Inc." <pv-drivers@vmware.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/misc/vmw_balloon.c
VMWARE VMXNET3 ETHERNET DRIVER
M: Shreyas Bhatewara <sbhatewara@vmware.com>
M: "VMware, Inc." <pv-drivers@vmware.com>

102
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 16
SUBLEVEL = 0
EXTRAVERSION = -rc1
EXTRAVERSION = -rc5
NAME = Shuffling Zombie Juror
# *DOCUMENTATION*
@ -41,6 +41,29 @@ unexport GREP_OPTIONS
# descending is started. They are now explicitly listed as the
# prepare rule.
# Beautify output
# ---------------------------------------------------------------------------
#
# Normally, we echo the whole command before executing it. By making
# that echo $($(quiet)$(cmd)), we now have the possibility to set
# $(quiet) to choose other forms of output instead, e.g.
#
# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
#
# If $(quiet) is empty, the whole command will be printed.
# If it is set to "quiet_", only the short version will be printed.
# If it is set to "silent_", nothing will be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
# A simple variant is to prefix commands with $(Q) - that's useful
# for commands that shall be hidden in non-verbose mode.
#
# $(Q)ln $@ :<
#
# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
# If KBUILD_VERBOSE equals 1 then the above command is displayed.
#
# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands
@ -51,6 +74,29 @@ ifndef KBUILD_VERBOSE
KBUILD_VERBOSE = 0
endif
ifeq ($(KBUILD_VERBOSE),1)
quiet =
Q =
else
quiet=quiet_
Q = @
endif
# If the user is running make -s (silent mode), suppress echoing of
# commands
ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
quiet=silent_
endif
else # make-3.8x
ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
quiet=silent_
endif
endif
export quiet Q KBUILD_VERBOSE
# Call a source code checker (by default, "sparse") as part of the
# C compilation.
#
@ -126,7 +172,13 @@ PHONY += $(MAKECMDGOALS) sub-make
$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
@:
# Fake the "Entering directory" message once, so that IDEs/editors are
# able to understand relative filenames.
echodir := @echo
quiet_echodir := @echo
silent_echodir := @:
sub-make: FORCE
$($(quiet)echodir) "make[1]: Entering directory \`$(KBUILD_OUTPUT)'"
$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
KBUILD_SRC=$(CURDIR) \
KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
@ -289,52 +341,6 @@ endif
export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
# Beautify output
# ---------------------------------------------------------------------------
#
# Normally, we echo the whole command before executing it. By making
# that echo $($(quiet)$(cmd)), we now have the possibility to set
# $(quiet) to choose other forms of output instead, e.g.
#
# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
#
# If $(quiet) is empty, the whole command will be printed.
# If it is set to "quiet_", only the short version will be printed.
# If it is set to "silent_", nothing will be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
# A simple variant is to prefix commands with $(Q) - that's useful
# for commands that shall be hidden in non-verbose mode.
#
# $(Q)ln $@ :<
#
# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
# If KBUILD_VERBOSE equals 1 then the above command is displayed.
ifeq ($(KBUILD_VERBOSE),1)
quiet =
Q =
else
quiet=quiet_
Q = @
endif
# If the user is running make -s (silent mode), suppress echoing of
# commands
ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
quiet=silent_
endif
else # make-3.8x
ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
quiet=silent_
endif
endif
export quiet Q KBUILD_VERBOSE
ifneq ($(CC),)
ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1)
COMPILER := clang
@ -1170,7 +1176,7 @@ distclean: mrproper
# Packaging of the kernel to various formats
# ---------------------------------------------------------------------------
# rpm target kept for backward compatibility
package-dir := $(srctree)/scripts/package
package-dir := scripts/package
%src-pkg: FORCE
$(Q)$(MAKE) $(build)=$(package-dir) $@

View File

@ -60,7 +60,7 @@ extern void read_decode_cache_bcr(void);
#define ARC_REG_IC_IVIC 0x10
#define ARC_REG_IC_CTRL 0x11
#define ARC_REG_IC_IVIL 0x19
#if defined(CONFIG_ARC_MMU_V3) || defined (CONFIG_ARC_MMU_V4)
#if defined(CONFIG_ARC_MMU_V3)
#define ARC_REG_IC_PTAG 0x1E
#endif
@ -74,7 +74,7 @@ extern void read_decode_cache_bcr(void);
#define ARC_REG_DC_IVDL 0x4A
#define ARC_REG_DC_FLSH 0x4B
#define ARC_REG_DC_FLDL 0x4C
#if defined(CONFIG_ARC_MMU_V3) || defined (CONFIG_ARC_MMU_V4)
#if defined(CONFIG_ARC_MMU_V3)
#define ARC_REG_DC_PTAG 0x5C
#endif

View File

@ -11,6 +11,7 @@
#ifndef _UAPI__ASM_ARC_PTRACE_H
#define _UAPI__ASM_ARC_PTRACE_H
#define PTRACE_GET_THREAD_AREA 25
#ifndef __ASSEMBLY__
/*

View File

@ -10,9 +10,9 @@
* -This is the more "natural" hand written assembler
*/
#include <linux/linkage.h>
#include <asm/entry.h> /* For the SAVE_* macros */
#include <asm/asm-offsets.h>
#include <asm/linkage.h>
#define KSP_WORD_OFF ((TASK_THREAD + THREAD_KSP) / 4)

View File

@ -41,7 +41,7 @@ const struct machine_desc * __init setup_machine_fdt(void *dt)
{
const struct machine_desc *mdesc;
unsigned long dt_root;
void *clk;
const void *clk;
int len;
if (!early_init_dt_scan(dt))

View File

@ -77,10 +77,11 @@ stext:
; Clear BSS before updating any globals
; XXX: use ZOL here
mov r5, __bss_start
mov r6, __bss_stop
sub r6, __bss_stop, r5
lsr.f lp_count, r6, 2
lpnz 1f
st.ab 0, [r5, 4]
1:
st.ab 0, [r5,4]
brlt r5, r6, 1b
; Uboot - kernel ABI
; r0 = [0] No uboot interaction, [1] cmdline in r2, [2] DTB in r2

View File

@ -146,6 +146,10 @@ long arch_ptrace(struct task_struct *child, long request,
pr_debug("REQ=%ld: ADDR =0x%lx, DATA=0x%lx)\n", request, addr, data);
switch (request) {
case PTRACE_GET_THREAD_AREA:
ret = put_user(task_thread_info(child)->thr_ptr,
(unsigned long __user *)data);
break;
default:
ret = ptrace_request(child, request, addr, data);
break;

View File

@ -337,8 +337,19 @@ irqreturn_t do_IPI(int irq, void *dev_id)
* API called by platform code to hookup arch-common ISR to their IPI IRQ
*/
static DEFINE_PER_CPU(int, ipi_dev);
static struct irqaction arc_ipi_irq = {
.name = "IPI Interrupt",
.flags = IRQF_PERCPU,
.handler = do_IPI,
};
int smp_ipi_irq_setup(int cpu, int irq)
{
int *dev_id = &per_cpu(ipi_dev, smp_processor_id());
return request_percpu_irq(irq, do_IPI, "IPI Interrupt", dev_id);
if (!cpu)
return setup_irq(irq, &arc_ipi_irq);
else
arch_unmask_irq(irq);
return 0;
}

View File

@ -116,7 +116,7 @@ SECTIONS
_edata = .;
BSS_SECTION(0, 0, 0)
BSS_SECTION(4, 4, 4)
#ifdef CONFIG_ARC_DW2_UNWIND
. = ALIGN(PAGE_SIZE);

View File

@ -389,7 +389,7 @@ static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr,
/***********************************************************
* Machine specific helper for per line I-Cache invalidate.
*/
static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr,
static void __ic_line_inv_vaddr_local(unsigned long paddr, unsigned long vaddr,
unsigned long sz)
{
unsigned long flags;
@ -405,6 +405,23 @@ static inline void __ic_entire_inv(void)
read_aux_reg(ARC_REG_IC_CTRL); /* blocks */
}
struct ic_line_inv_vaddr_ipi {
unsigned long paddr, vaddr;
int sz;
};
static void __ic_line_inv_vaddr_helper(void *info)
{
struct ic_line_inv_vaddr_ipi *ic_inv = (struct ic_line_inv_vaddr_ipi*) info;
__ic_line_inv_vaddr_local(ic_inv->paddr, ic_inv->vaddr, ic_inv->sz);
}
static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr,
unsigned long sz)
{
struct ic_line_inv_vaddr_ipi ic_inv = { paddr, vaddr , sz};
on_each_cpu(__ic_line_inv_vaddr_helper, &ic_inv, 1);
}
#else
#define __ic_entire_inv()
@ -553,12 +570,8 @@ void flush_icache_range(unsigned long kstart, unsigned long kend)
*/
void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len)
{
unsigned long flags;
local_irq_save(flags);
__ic_line_inv_vaddr(paddr, vaddr, len);
__dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV);
local_irq_restore(flags);
__ic_line_inv_vaddr(paddr, vaddr, len);
}
/* wrapper to compile time eliminate alignment checks in flush loop */

View File

@ -175,13 +175,6 @@ config ARCH_HAS_ILOG2_U32
config ARCH_HAS_ILOG2_U64
bool
config ARCH_HAS_CPUFREQ
bool
help
Internal node to signify that the ARCH has CPUFREQ support
and that the relevant menu configurations are displayed for
it.
config ARCH_HAS_BANDGAP
bool
@ -318,7 +311,6 @@ config ARCH_MULTIPLATFORM
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARCH_HAS_CPUFREQ
select ARM_AMBA
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
@ -538,7 +530,6 @@ config ARCH_DOVE
config ARCH_KIRKWOOD
bool "Marvell Kirkwood"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
@ -637,7 +628,6 @@ config ARCH_LPC32XX
config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
depends on MMU
select ARCH_HAS_CPUFREQ
select ARCH_MTD_XIP
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
@ -707,7 +697,6 @@ config ARCH_RPC
config ARCH_SA1100
bool "SA1100-based"
select ARCH_HAS_CPUFREQ
select ARCH_MTD_XIP
select ARCH_REQUIRE_GPIOLIB
select ARCH_SPARSEMEM_ENABLE
@ -725,7 +714,6 @@ config ARCH_SA1100
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ATAGS
select CLKDEV_LOOKUP
@ -746,7 +734,6 @@ config ARCH_S3C24XX
config ARCH_S3C64XX
bool "Samsung S3C64XX"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
@ -809,7 +796,6 @@ config ARCH_S5PC100
config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_SPARSEMEM_ENABLE
select ATAGS
@ -845,7 +831,6 @@ config ARCH_DAVINCI
config ARCH_OMAP1
bool "TI OMAP1"
depends on MMU
select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
@ -1009,8 +994,6 @@ source "arch/arm/mach-rockchip/Kconfig"
source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/mach-socfpga/Kconfig"
source "arch/arm/mach-spear/Kconfig"
@ -1028,6 +1011,7 @@ source "arch/arm/mach-s5pc100/Kconfig"
source "arch/arm/mach-s5pv210/Kconfig"
source "arch/arm/mach-exynos/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/mach-shmobile/Kconfig"
@ -2109,9 +2093,7 @@ endmenu
menu "CPU Power Management"
if ARCH_HAS_CPUFREQ
source "drivers/cpufreq/Kconfig"
endif
source "drivers/cpuidle/Kconfig"

View File

@ -357,7 +357,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
stih415-b2020.dtb \
stih416-b2000.dtb \
stih416-b2020.dtb \
stih416-b2020-revE.dtb
stih416-b2020e.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-cubieboard.dtb \

View File

@ -529,8 +529,8 @@
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
tx-num-evt = <1>;
rx-num-evt = <1>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&tps {

View File

@ -560,8 +560,8 @@
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
tx-num-evt = <1>;
rx-num-evt = <1>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&tscadc {

View File

@ -105,10 +105,16 @@
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rmii";
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rmii";
};
&phy_sel {
rmii-clock-ext;
};
&elm {

View File

@ -319,6 +319,10 @@
phy-mode = "rmii";
};
&phy_sel {
rmii-clock-ext;
};
&i2c0 {
status = "okay";
pinctrl-names = "default";

View File

@ -91,6 +91,8 @@
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
partition@0 {
label = "U-Boot";

View File

@ -16,7 +16,7 @@
/ {
model = "Marvell Armada 380 family SoC";
compatible = "marvell,armada380", "marvell,armada38x";
compatible = "marvell,armada380";
cpus {
#address-cells = <1>;

View File

@ -16,7 +16,7 @@
/ {
model = "Marvell Armada 385 Development Board";
compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada38x";
compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
@ -98,6 +98,8 @@
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
partition@0 {
label = "U-Boot";

View File

@ -17,7 +17,7 @@
/ {
model = "Marvell Armada 385 Reference Design";
compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada38x";
compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";

View File

@ -16,7 +16,7 @@
/ {
model = "Marvell Armada 385 family SoC";
compatible = "marvell,armada385", "marvell,armada38x";
compatible = "marvell,armada385", "marvell,armada380";
cpus {
#address-cells = <1>;

View File

@ -20,7 +20,7 @@
/ {
model = "Marvell Armada 38x family SoC";
compatible = "marvell,armada38x";
compatible = "marvell,armada380";
aliases {
gpio0 = &gpio0;

View File

@ -25,7 +25,7 @@
memory {
device_type = "memory";
reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */
reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
};
soc {

View File

@ -568,24 +568,17 @@
#size-cells = <0>;
#interrupt-cells = <1>;
slow_rc_osc: slow_rc_osc {
compatible = "fixed-clock";
main_osc: main_osc {
compatible = "atmel,at91rm9200-clk-main-osc";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-accuracy = <50000000>;
};
clk32k: slck {
compatible = "atmel,at91sam9260-clk-slow";
#clock-cells = <0>;
clocks = <&slow_rc_osc &slow_xtal>;
interrupts-extended = <&pmc AT91_PMC_MOSCS>;
clocks = <&main_xtal>;
};
main: mainck {
compatible = "atmel,at91rm9200-clk-main";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_MOSCS>;
clocks = <&main_xtal>;
clocks = <&main_osc>;
};
plla: pllack {
@ -615,7 +608,7 @@
compatible = "atmel,at91rm9200-clk-master";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
atmel,clk-output-range = <0 94000000>;
atmel,clk-divisors = <1 2 4 0>;
};
@ -632,7 +625,7 @@
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&pmc>;
clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
prog0: prog0 {
#clock-cells = <0>;

View File

@ -20,6 +20,10 @@
reg = <0x20000000 0x4000000>;
};
slow_xtal {
clock-frequency = <32768>;
};
main_xtal {
clock-frequency = <18432000>;
};

View File

@ -132,8 +132,8 @@
<595000000 650000000 3 0>,
<545000000 600000000 0 1>,
<495000000 555000000 1 1>,
<445000000 500000000 1 2>,
<400000000 450000000 1 3>;
<445000000 500000000 2 1>,
<400000000 450000000 3 1>;
};
plladiv: plladivck {

View File

@ -140,8 +140,8 @@
595000000 650000000 3 0
545000000 600000000 0 1
495000000 555000000 1 1
445000000 500000000 1 2
400000000 450000000 1 3>;
445000000 500000000 2 1
400000000 450000000 3 1>;
};
plladiv: plladivck {
@ -1045,6 +1045,8 @@
reg = <0x00500000 0x80000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&usb>, <&udphs_clk>;
clock-names = "hclk", "pclk";
status = "disabled";
ep0 {

View File

@ -240,6 +240,7 @@
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};

View File

@ -773,7 +773,6 @@
clocks = <&qspi_gfclk_div>;
clock-names = "fck";
num-cs = <4>;
interrupts = <0 343 0x4>;
status = "disabled";
};
@ -984,6 +983,17 @@
#size-cells = <1>;
status = "disabled";
};
atl: atl@4843c000 {
compatible = "ti,dra7-atl";
reg = <0x4843c000 0x3ff>;
ti,hwmods = "atl";
ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
<&atl_clkin2_ck>, <&atl_clkin3_ck>;
clocks = <&atl_gfclk_mux>;
clock-names = "fck";
status = "disabled";
};
};
};

View File

@ -10,26 +10,26 @@
&cm_core_aon_clocks {
atl_clkin0_ck: atl_clkin0_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
compatible = "ti,dra7-atl-clock";
clocks = <&atl_gfclk_mux>;
};
atl_clkin1_ck: atl_clkin1_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
compatible = "ti,dra7-atl-clock";
clocks = <&atl_gfclk_mux>;
};
atl_clkin2_ck: atl_clkin2_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
compatible = "ti,dra7-atl-clock";
clocks = <&atl_gfclk_mux>;
};
atl_clkin3_ck: atl_clkin3_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
compatible = "ti,dra7-atl-clock";
clocks = <&atl_gfclk_mux>;
};
hdmi_clkin_ck: hdmi_clkin_ck {
@ -673,10 +673,12 @@
l3_iclk_div: l3_iclk_div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
compatible = "ti,divider-clock";
ti,max-div = <2>;
ti,bit-shift = <4>;
reg = <0x0100>;
clocks = <&dpll_core_h12x2_ck>;
clock-mult = <1>;
clock-div = <1>;
ti,index-power-of-two;
};
l4_root_clk_div: l4_root_clk_div {
@ -684,7 +686,7 @@
compatible = "fixed-factor-clock";
clocks = <&l3_iclk_div>;
clock-mult = <1>;
clock-div = <1>;
clock-div = <2>;
};
video1_clk2_div: video1_clk2_div {

View File

@ -113,7 +113,7 @@
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x10490000 0x1000>, <0x10480000 0x100>;
reg = <0x10490000 0x10000>, <0x10480000 0x10000>;
};
combiner: interrupt-controller@10440000 {
@ -554,7 +554,7 @@
interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
clocks = <&clock CLK_PWM>;
clock-names = "timers";
#pwm-cells = <2>;
#pwm-cells = <3>;
status = "disabled";
};

View File

@ -167,7 +167,7 @@
compatible = "samsung,exynos5420-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
<&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
@ -260,6 +260,9 @@
mfc_pd: power-domain@10044060 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044060 0x20>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
<&clock CLK_MOUT_USER_ACLK333>;
clock-names = "oscclk", "pclk0", "clk0";
};
disp_pd: power-domain@100440C0 {

View File

@ -315,15 +315,15 @@
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
fsl,cd-controller;
fsl,wp-controller;
cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&esdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2>;
cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@ -468,8 +468,8 @@
MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
MX51_PAD_GPIO1_0__SD1_CD 0x20d5
MX51_PAD_GPIO1_1__SD1_WP 0x20d5
MX51_PAD_GPIO1_0__GPIO1_0 0x100
MX51_PAD_GPIO1_1__GPIO1_1 0x100
>;
};

View File

@ -107,7 +107,7 @@
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
fsl,cd-controller;
cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
status = "okay";
};
@ -206,7 +206,7 @@
pinctrl_esdhc1_cd: esdhc1_cd {
fsl,pins = <
MX51_PAD_GPIO1_0__SD1_CD 0x20d5
MX51_PAD_GPIO1_0__GPIO1_0 0xd5
>;
};

View File

@ -21,27 +21,25 @@
<0xb0000000 0x20000000>;
};
soc {
display1: display@di1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1>;
display1: display@di1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1>;
display-timings {
800x480p60 {
native-mode;
clock-frequency = <31500000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <40>;
hback-porch = <88>;
hsync-len = <128>;
vback-porch = <33>;
vfront-porch = <9>;
vsync-len = <3>;
vsync-active = <1>;
};
display-timings {
800x480p60 {
native-mode;
clock-frequency = <31500000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <40>;
hback-porch = <88>;
hsync-len = <128>;
vback-porch = <33>;
vfront-porch = <9>;
vsync-len = <3>;
vsync-active = <1>;
};
};

View File

@ -143,6 +143,14 @@
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
};
pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
/*
* Similar to pinctrl_usbotg_2, but we want it
* pulled down for a fixed host connection.
*/
fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
};
pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
};
@ -178,6 +186,8 @@
};
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
vbus-supply = <&reg_usbotg_vbus>;
status = "okay";
};

View File

@ -11,7 +11,7 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-gw54xx.dtsi"
#include "imx6qdl-gw51xx.dtsi"
/ {
model = "Gateworks Ventana i.MX6 Quad GW51XX";

View File

@ -12,6 +12,19 @@
pinctrl-0 = <&pinctrl_cubox_i_ir>;
};
pwmleds {
compatible = "pwm-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
front {
active-low;
label = "imx6:red:front";
max-brightness = <248>;
pwms = <&pwm1 0 50000>;
};
};
regulators {
compatible = "simple-bus";
@ -109,6 +122,10 @@
>;
};
pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
};
pinctrl_cubox_i_spdif: cubox-i-spdif {
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
@ -117,6 +134,14 @@
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
};
pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id {
/*
* The Cubox-i pulls this low, but as it's pointless
* leaving it as a pull-up, even if it is just 10uA.
*/
fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
};
pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
};
@ -153,6 +178,8 @@
};
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>;
vbus-supply = <&reg_usbotg_vbus>;
status = "okay";
};

View File

@ -161,7 +161,7 @@
status = "okay";
pmic: ltc3676@3c {
compatible = "ltc,ltc3676";
compatible = "lltc,ltc3676";
reg = <0x3c>;
regulators {

View File

@ -220,7 +220,7 @@
};
pmic: ltc3676@3c {
compatible = "ltc,ltc3676";
compatible = "lltc,ltc3676";
reg = <0x3c>;
regulators {
@ -288,7 +288,7 @@
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 169>;
clocks = <&clks 201>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_3p3v>;
};

View File

@ -234,7 +234,7 @@
};
pmic: ltc3676@3c {
compatible = "ltc,ltc3676";
compatible = "lltc,ltc3676";
reg = <0x3c>;
regulators {

View File

@ -10,14 +10,6 @@
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
pinctrl_microsom_usbotg: microsom-usbotg {
/*
* Similar to pinctrl_usbotg_2, but we want it
* pulled down for a fixed host connection.
*/
fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
};
};
};
@ -26,8 +18,3 @@
pinctrl-0 = <&pinctrl_microsom_uart1>;
status = "okay";
};
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_microsom_usbotg>;
};

View File

@ -686,7 +686,7 @@
compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ENET_REF>,
clocks = <&clks IMX6SL_CLK_ENET>,
<&clks IMX6SL_CLK_ENET_REF>;
clock-names = "ipg", "ahb";
status = "disabled";

View File

@ -105,7 +105,6 @@
compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
phy-connection-type = "rgmii-id";
};
ethphy1: ethernet-phy@1 {
@ -113,7 +112,6 @@
compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
phy-connection-type = "rgmii-id";
};
};
@ -121,6 +119,7 @@
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
phy-connection-type = "rgmii-id";
};
};
@ -128,5 +127,6 @@
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
phy-connection-type = "rgmii-id";
};
};

View File

@ -251,6 +251,11 @@
codec {
};
};
twl_power: power {
compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
ti,use_poweroff;
};
};
};
@ -301,6 +306,7 @@
};
&uart3 {
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};

View File

@ -50,6 +50,13 @@
gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
};
&twl {
twl_power: power {
compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
ti,use_poweroff;
};
};
&i2c2 {
clock-frequency = <400000>;
};

View File

@ -351,6 +351,11 @@
compatible = "ti,twl4030-audio";
ti,enable-vibra = <1>;
};
twl_power: power {
compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
ti,use_poweroff;
};
};
&twl_keypad {

View File

@ -45,7 +45,6 @@
operating-points = <
/* kHz uV */
500000 880000
1000000 1060000
1500000 1250000
>;

View File

@ -169,8 +169,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii0>;
clock-names = "stmmaceth";
clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>;
clock-names = "stmmaceth", "sti-ethclk";
clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
};
ethernet1: dwmac@fef08000 {
@ -192,8 +192,8 @@
reset-names = "stmmaceth";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii1>;
clock-names = "stmmaceth";
clocks = <&clk_s_a0_ls CLK_ETH1_PHY>;
clock-names = "stmmaceth", "sti-ethclk";
clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
};
rc: rc@fe518000 {

View File

@ -175,8 +175,8 @@
reset-names = "stmmaceth";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii0>;
clock-names = "stmmaceth";
clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>;
clock-names = "stmmaceth", "sti-ethclk";
clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
};
ethernet1: dwmac@fef08000 {
@ -197,8 +197,8 @@
reset-names = "stmmaceth";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii1>;
clock-names = "stmmaceth";
clocks = <&clk_s_a0_ls CLK_ETH1_PHY>;
clock-names = "stmmaceth", "sti-ethclk";
clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
};
rc: rc@fe518000 {

View File

@ -182,7 +182,6 @@ static int scoop_probe(struct platform_device *pdev)
struct scoop_config *inf;
struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
int ret;
int temp;
if (!mem)
return -EINVAL;

View File

@ -94,10 +94,10 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_PWM=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_BLOCK_MINORS=32
CONFIG_MMC_TEST=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_BCM_KONA=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

View File

@ -186,6 +186,7 @@ CONFIG_VIDEO_MX3=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_CODA=y
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y

View File

@ -223,12 +223,12 @@ CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_SUN6I=y
CONFIG_SENSORS_LM90=y
CONFIG_THERMAL=y
CONFIG_DOVE_THERMAL=y
CONFIG_ARMADA_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_ORION_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_MFD_AS3722=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_SPI=y
CONFIG_MFD_MAX8907=y
@ -240,6 +240,7 @@ CONFIG_MFD_TPS65910=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_AB8500=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_PALMAS=y
@ -300,6 +301,7 @@ CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_DOVE=y
@ -352,6 +354,7 @@ CONFIG_MFD_NVEC=y
CONFIG_KEYBOARD_NVEC=y
CONFIG_SERIO_NVEC_PS2=y
CONFIG_NVEC_POWER=y
CONFIG_QCOM_GSBI=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y

View File

@ -14,6 +14,7 @@ CONFIG_MACH_ARMADA_370=y
CONFIG_MACH_ARMADA_375=y
CONFIG_MACH_ARMADA_38X=y
CONFIG_MACH_ARMADA_XP=y
CONFIG_MACH_DOVE=y
CONFIG_NEON=y
# CONFIG_CACHE_L2X0 is not set
# CONFIG_SWP_EMULATE is not set
@ -52,6 +53,7 @@ CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_I2C=y
CONFIG_SPI=y
CONFIG_SPI_ORION=y

View File

@ -32,6 +32,7 @@ CONFIG_SOC_OMAP5=y
CONFIG_SOC_AM33XX=y
CONFIG_SOC_AM43XX=y
CONFIG_SOC_DRA7XX=y
CONFIG_CACHE_L2X0=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_ERRATA_411920=y
CONFIG_SMP=y

View File

@ -52,7 +52,7 @@ extern inline void *return_address(unsigned int level)
#endif
#define ftrace_return_addr(n) return_address(n)
#define ftrace_return_address(n) return_address(n)
#endif /* ifndef __ASSEMBLY__ */

View File

@ -208,8 +208,6 @@ struct sync_struct {
struct mcpm_sync_struct clusters[MAX_NR_CLUSTERS];
};
extern unsigned long sync_phys; /* physical address of *mcpm_sync */
void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster);
void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster);
void __mcpm_outbound_leave_critical(unsigned int cluster, int state);

View File

@ -114,8 +114,14 @@ static inline struct thread_info *current_thread_info(void)
((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
#define thread_saved_sp(tsk) \
((unsigned long)(task_thread_info(tsk)->cpu_context.sp))
#ifndef CONFIG_THUMB2_KERNEL
#define thread_saved_fp(tsk) \
((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
#else
#define thread_saved_fp(tsk) \
((unsigned long)(task_thread_info(tsk)->cpu_context.r7))
#endif
extern void crunch_task_disable(struct thread_info *);
extern void crunch_task_copy(struct thread_info *, void *);

View File

@ -74,8 +74,6 @@ void kprobe_arm_test_cases(void)
TEST_RRR( op "lt" s " r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\
TEST_RR( op "gt" s " r12, r13" ", r",14,val, ", ror r",14,7,"")\
TEST_RR( op "le" s " r14, r",0, val, ", r13" ", lsl r",14,8,"")\
TEST_RR( op s " r12, pc" ", r",14,val, ", ror r",14,7,"")\
TEST_RR( op s " r14, r",0, val, ", pc" ", lsl r",14,8,"")\
TEST_R( op "eq" s " r0, r",11,VAL1,", #0xf5") \
TEST_R( op "ne" s " r11, r",0, VAL1,", #0xf5000000") \
TEST_R( op s " r7, r",8, VAL2,", #0x000af000") \
@ -103,8 +101,6 @@ void kprobe_arm_test_cases(void)
TEST_RRR( op "ge r",11,VAL1,", r",14,N(val),", asr r",7, 6,"") \
TEST_RR( op "le r13" ", r",14,val, ", ror r",14,7,"") \
TEST_RR( op "gt r",0, val, ", r13" ", lsl r",14,8,"") \
TEST_RR( op " pc" ", r",14,val, ", ror r",14,7,"") \
TEST_RR( op " r",0, val, ", pc" ", lsl r",14,8,"") \
TEST_R( op "eq r",11,VAL1,", #0xf5") \
TEST_R( op "ne r",0, VAL1,", #0xf5000000") \
TEST_R( op " r",8, VAL2,", #0x000af000")
@ -125,7 +121,6 @@ void kprobe_arm_test_cases(void)
TEST_RR( op "ge" s " r11, r",11,N(val),", asr r",7, 6,"") \
TEST_RR( op "lt" s " r12, r",11,val, ", ror r",14,7,"") \
TEST_R( op "gt" s " r14, r13" ", lsl r",14,8,"") \
TEST_R( op "le" s " r14, pc" ", lsl r",14,8,"") \
TEST( op "eq" s " r0, #0xf5") \
TEST( op "ne" s " r11, #0xf5000000") \
TEST( op s " r7, #0x000af000") \
@ -159,12 +154,19 @@ void kprobe_arm_test_cases(void)
TEST_SUPPORTED("cmp pc, #0x1000");
TEST_SUPPORTED("cmp sp, #0x1000");
/* Data-processing with PC as shift*/
/* Data-processing with PC and a shift count in a register */
TEST_UNSUPPORTED(__inst_arm(0xe15c0f1e) " @ cmp r12, r14, asl pc")
TEST_UNSUPPORTED(__inst_arm(0xe1a0cf1e) " @ mov r12, r14, asl pc")
TEST_UNSUPPORTED(__inst_arm(0xe08caf1e) " @ add r10, r12, r14, asl pc")
TEST_UNSUPPORTED(__inst_arm(0xe151021f) " @ cmp r1, pc, lsl r2")
TEST_UNSUPPORTED(__inst_arm(0xe17f0211) " @ cmn pc, r1, lsl r2")
TEST_UNSUPPORTED(__inst_arm(0xe1a0121f) " @ mov r1, pc, lsl r2")
TEST_UNSUPPORTED(__inst_arm(0xe1a0f211) " @ mov pc, r1, lsl r2")
TEST_UNSUPPORTED(__inst_arm(0xe042131f) " @ sub r1, r2, pc, lsl r3")
TEST_UNSUPPORTED(__inst_arm(0xe1cf1312) " @ bic r1, pc, r2, lsl r3")
TEST_UNSUPPORTED(__inst_arm(0xe081f312) " @ add pc, r1, r2, lsl r3")
/* Data-processing with PC as shift*/
/* Data-processing with PC as a target and status registers updated */
TEST_UNSUPPORTED("movs pc, r1")
TEST_UNSUPPORTED("movs pc, r1, lsl r2")
TEST_UNSUPPORTED("movs pc, #0x10000")
@ -187,14 +189,14 @@ void kprobe_arm_test_cases(void)
TEST_BF_R ("add pc, pc, r",14,2f-1f-8,"")
TEST_BF_R ("add pc, r",14,2f-1f-8,", pc")
TEST_BF_R ("mov pc, r",0,2f,"")
TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"")
TEST_BF_R ("add pc, pc, r",14,(2f-1f-8)*2,", asr #1")
TEST_BB( "sub pc, pc, #1b-2b+8")
#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7)
TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */
#endif
TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"")
TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc")
TEST_RR( "add pc, pc, r",10,-2,", asl r",11,1,"")
TEST_R( "add pc, pc, r",10,-2,", asl #1")
#ifdef CONFIG_THUMB2_KERNEL
TEST_ARM_TO_THUMB_INTERWORK_R("add pc, pc, r",0,3f-1f-8+1,"")
TEST_ARM_TO_THUMB_INTERWORK_R("sub pc, r",0,3f+8+1,", #8")
@ -216,6 +218,7 @@ void kprobe_arm_test_cases(void)
TEST_BB_R("bx r",7,2f,"")
TEST_BF_R("bxeq r",14,2f,"")
#if __LINUX_ARM_ARCH__ >= 5
TEST_R("clz r0, r",0, 0x0,"")
TEST_R("clzeq r7, r",14,0x1,"")
TEST_R("clz lr, r",7, 0xffffffff,"")
@ -337,6 +340,7 @@ void kprobe_arm_test_cases(void)
TEST_UNSUPPORTED(__inst_arm(0xe16f02e1) " @ smultt pc, r1, r2")
TEST_UNSUPPORTED(__inst_arm(0xe16002ef) " @ smultt r0, pc, r2")
TEST_UNSUPPORTED(__inst_arm(0xe1600fe1) " @ smultt r0, r1, pc")
#endif
TEST_GROUP("Multiply and multiply-accumulate")
@ -559,6 +563,7 @@ void kprobe_arm_test_cases(void)
TEST_UNSUPPORTED("ldrsht r1, [r2], #48")
#endif
#if __LINUX_ARM_ARCH__ >= 5
TEST_RPR( "strd r",0, VAL1,", [r",1, 48,", -r",2,24,"]")
TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]")
TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
@ -595,6 +600,7 @@ void kprobe_arm_test_cases(void)
TEST_UNSUPPORTED(__inst_arm(0xe1efc3d0) " @ ldrd r12, [pc, #48]!")
TEST_UNSUPPORTED(__inst_arm(0xe0c9f3d0) " @ ldrd pc, [r9], #48")
TEST_UNSUPPORTED(__inst_arm(0xe0c9e3d0) " @ ldrd lr, [r9], #48")
#endif
TEST_GROUP("Miscellaneous")
@ -1227,7 +1233,9 @@ void kprobe_arm_test_cases(void)
TEST_COPROCESSOR( "mrc"two" 0, 0, r0, cr0, cr0, 0")
COPROCESSOR_INSTRUCTIONS_ST_LD("",e)
#if __LINUX_ARM_ARCH__ >= 5
COPROCESSOR_INSTRUCTIONS_MC_MR("",e)
#endif
TEST_UNSUPPORTED("svc 0")
TEST_UNSUPPORTED("svc 0xffffff")
@ -1287,7 +1295,9 @@ void kprobe_arm_test_cases(void)
TEST( "blx __dummy_thumb_subroutine_odd")
#endif /* __LINUX_ARM_ARCH__ >= 6 */
#if __LINUX_ARM_ARCH__ >= 5
COPROCESSOR_INSTRUCTIONS_ST_LD("2",f)
#endif
#if __LINUX_ARM_ARCH__ >= 6
COPROCESSOR_INSTRUCTIONS_MC_MR("2",f)
#endif

Some files were not shown because too many files have changed in this diff Show More