Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-29 14:21:47 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'imx/soc' into imx/dt

Browse Source
This commit is contained in:
Shawn Guo 2015-03-30 16:37:04 +08:00
commit 40cb1981b3
7 changed files with 293 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

59
Documentation/devicetree/bindings/power/fsl,imx-gpc.txt Normal file
View File

@ -0,0 +1,59 @@
Freescale i.MX General Power Controller
=======================================
The i.MX6Q General Power Control (GPC) block contains DVFS load tracking
counters and Power Gating Control (PGC) for the CPU and PU (GPU/VPU) power
domains.
Required properties:
- compatible: Should be "fsl,imx6q-gpc" or "fsl,imx6sl-gpc"
- reg: should be register base and length as documented in the
datasheet
- interrupts: Should contain GPC interrupt request 1
- pu-supply: Link to the LDO regulator powering the PU power domain
- clocks: Clock phandles to devices in the PU power domain that need
to be enabled during domain power-up for reset propagation.
- #power-domain-cells: Should be 1, see below:
The gpc node is a power-controller as documented by the generic power domain
bindings in Documentation/devicetree/bindings/power/power_domain.txt.
Example:
gpc: gpc@020dc000 {
compatible = "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
<0 90 IRQ_TYPE_LEVEL_HIGH>;
pu-supply = <&reg_pu>;
clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
<&clks IMX6QDL_CLK_GPU3D_SHADER>,
<&clks IMX6QDL_CLK_GPU2D_CORE>,
<&clks IMX6QDL_CLK_GPU2D_AXI>,
<&clks IMX6QDL_CLK_OPENVG_AXI>,
<&clks IMX6QDL_CLK_VPU_AXI>;
#power-domain-cells = <1>;
};
Specifying power domain for IP modules
======================================
IP cores belonging to a power domain should contain a 'power-domains' property
that is a phandle pointing to the gpc device node and a DOMAIN_INDEX specifying
the power domain the device belongs to.
Example of a device that is part of the PU power domain:
vpu: vpu@02040000 {
reg = <0x02040000 0x3c000>;
/* ... */
power-domains = <&gpc 1>;
/* ... */
};
The following DOMAIN_INDEX values are valid for i.MX6Q:
ARM_DOMAIN 0
PU_DOMAIN 1
The following additional DOMAIN_INDEX value is valid for i.MX6SL:
DISPLAY_DOMAIN 2

3
arch/arm/mach-imx/Kconfig
View File

@ -21,6 +21,7 @@ config MXC_AVIC
config MXC_DEBUG_BOARD
bool "Enable MXC debug board(for 3-stack)"
depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS
help
The debug board is an integral part of the MXC 3-stack(PDK)
platforms, it can be attached or removed from the peripheral
@ -50,6 +51,7 @@ config HAVE_IMX_ANATOP
config HAVE_IMX_GPC
bool
select PM_GENERIC_DOMAINS if PM
config HAVE_IMX_MMDC
bool
@ -585,6 +587,7 @@ config SOC_VF610
select ARM_GIC
select PINCTRL_VF610
select PL310_ERRATA_769419 if CACHE_L2X0
select SMP_ON_UP if SMP
help
This enables support for Freescale Vybrid VF610 processor.

8
arch/arm/mach-imx/clk-imx6q.c
View File

@ -119,6 +119,7 @@ static unsigned int share_count_asrc;
static unsigned int share_count_ssi1;
static unsigned int share_count_ssi2;
static unsigned int share_count_ssi3;
static unsigned int share_count_mipi_core_cfg;
static void __init imx6q_clocks_init(struct device_node *ccm_node)
{
@ -246,6 +247,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
clk[IMX6QDL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
clk[IMX6QDL_CLK_VIDEO_27M] = imx_clk_fixed_factor("video_27m", "pll3_pfd1_540m", 1, 20);
if (cpu_is_imx6dl()) {
clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1);
clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1);
@ -400,7 +402,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
clk[IMX6QDL_CLK_GPU3D_CORE] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26);
clk[IMX6QDL_CLK_HDMI_IAHB] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0);
clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4);
clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "video_27m", base + 0x70, 4);
clk[IMX6QDL_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6);
clk[IMX6QDL_CLK_I2C2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8);
clk[IMX6QDL_CLK_I2C3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10);
@ -415,7 +417,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[IMX6QDL_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12);
clk[IMX6QDL_CLK_LDB_DI1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
clk[IMX6QDL_CLK_IPU2_DI1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2_shared("hsi_tx", "hsi_tx_podf", base + 0x74, 16, &share_count_mipi_core_cfg);
clk[IMX6QDL_CLK_MIPI_CORE_CFG] = imx_clk_gate2_shared("mipi_core_cfg", "video_27m", base + 0x74, 16, &share_count_mipi_core_cfg);
clk[IMX6QDL_CLK_MIPI_IPG] = imx_clk_gate2_shared("mipi_ipg", "ipg", base + 0x74, 16, &share_count_mipi_core_cfg);
if (cpu_is_imx6dl())
/*
* The multiplexer and divider of the imx6q clock gpu2d get

213
arch/arm/mach-imx/gpc.c
View File

@ -10,15 +10,25 @@
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/regulator/consumer.h>
#include <linux/irqchip/arm-gic.h>
#include "common.h"
#include "hardware.h"
#define GPC_CNTR 0x000
#define GPC_IMR1 0x008
#define GPC_PGC_GPU_PDN 0x260
#define GPC_PGC_GPU_PUPSCR 0x264
#define GPC_PGC_GPU_PDNSCR 0x268
#define GPC_PGC_CPU_PDN 0x2a0
#define GPC_PGC_CPU_PUPSCR 0x2a4
#define GPC_PGC_CPU_PDNSCR 0x2a8
@ -27,6 +37,18 @@
#define IMR_NUM 4
#define GPU_VPU_PUP_REQ BIT(1)
#define GPU_VPU_PDN_REQ BIT(0)
#define GPC_CLK_MAX 6
struct pu_domain {
struct generic_pm_domain base;
struct regulator *reg;
struct clk *clk[GPC_CLK_MAX];
int num_clks;
};
static void __iomem *gpc_base;
static u32 gpc_wake_irqs[IMR_NUM];
static u32 gpc_saved_imrs[IMR_NUM];
@ -170,3 +192,194 @@ void __init imx_gpc_init(void)
gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
}
#ifdef CONFIG_PM_GENERIC_DOMAINS
static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
{
int iso, iso2sw;
u32 val;
/* Read ISO and ISO2SW power down delays */
val = readl_relaxed(gpc_base + GPC_PGC_GPU_PDNSCR);
iso = val & 0x3f;
iso2sw = (val >> 8) & 0x3f;
/* Gate off PU domain when GPU/VPU when powered down */
writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN);
/* Request GPC to power down GPU/VPU */
val = readl_relaxed(gpc_base + GPC_CNTR);
val |= GPU_VPU_PDN_REQ;
writel_relaxed(val, gpc_base + GPC_CNTR);
/* Wait ISO + ISO2SW IPG clock cycles */
ndelay((iso + iso2sw) * 1000 / 66);
}
static int imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
{
struct pu_domain *pu = container_of(genpd, struct pu_domain, base);
_imx6q_pm_pu_power_off(genpd);
if (pu->reg)
regulator_disable(pu->reg);
return 0;
}
static int imx6q_pm_pu_power_on(struct generic_pm_domain *genpd)
{
struct pu_domain *pu = container_of(genpd, struct pu_domain, base);
int i, ret, sw, sw2iso;
u32 val;
if (pu->reg)
ret = regulator_enable(pu->reg);
if (pu->reg && ret) {
pr_err("%s: failed to enable regulator: %d\n", __func__, ret);
return ret;
}
/* Enable reset clocks for all devices in the PU domain */
for (i = 0; i < pu->num_clks; i++)
clk_prepare_enable(pu->clk[i]);
/* Gate off PU domain when GPU/VPU when powered down */
writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN);
/* Read ISO and ISO2SW power down delays */
val = readl_relaxed(gpc_base + GPC_PGC_GPU_PUPSCR);
sw = val & 0x3f;
sw2iso = (val >> 8) & 0x3f;
/* Request GPC to power up GPU/VPU */
val = readl_relaxed(gpc_base + GPC_CNTR);
val |= GPU_VPU_PUP_REQ;
writel_relaxed(val, gpc_base + GPC_CNTR);
/* Wait ISO + ISO2SW IPG clock cycles */
ndelay((sw + sw2iso) * 1000 / 66);
/* Disable reset clocks for all devices in the PU domain */
for (i = 0; i < pu->num_clks; i++)
clk_disable_unprepare(pu->clk[i]);
return 0;
}
static struct generic_pm_domain imx6q_arm_domain = {
.name = "ARM",
};
static struct pu_domain imx6q_pu_domain = {
.base = {
.name = "PU",
.power_off = imx6q_pm_pu_power_off,
.power_on = imx6q_pm_pu_power_on,
.power_off_latency_ns = 25000,
.power_on_latency_ns = 2000000,
},
};
static struct generic_pm_domain imx6sl_display_domain = {
.name = "DISPLAY",
};
static struct generic_pm_domain *imx_gpc_domains[] = {
&imx6q_arm_domain,
&imx6q_pu_domain.base,
&imx6sl_display_domain,
};
static struct genpd_onecell_data imx_gpc_onecell_data = {
.domains = imx_gpc_domains,
.num_domains = ARRAY_SIZE(imx_gpc_domains),
};
static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
{
struct clk *clk;
bool is_off;
int i;
imx6q_pu_domain.reg = pu_reg;
for (i = 0; ; i++) {
clk = of_clk_get(dev->of_node, i);
if (IS_ERR(clk))
break;
if (i >= GPC_CLK_MAX) {
dev_err(dev, "more than %d clocks\n", GPC_CLK_MAX);
goto clk_err;
}
imx6q_pu_domain.clk[i] = clk;
}
imx6q_pu_domain.num_clks = i;
is_off = IS_ENABLED(CONFIG_PM);
if (is_off) {
_imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
} else {
/*
* Enable power if compiled without CONFIG_PM in case the
* bootloader disabled it.
*/
imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
}
pm_genpd_init(&imx6q_pu_domain.base, NULL, is_off);
return of_genpd_add_provider_onecell(dev->of_node,
&imx_gpc_onecell_data);
clk_err:
while (i--)
clk_put(imx6q_pu_domain.clk[i]);
return -EINVAL;
}
#else
static inline int imx_gpc_genpd_init(struct device *dev, struct regulator *reg)
{
return 0;
}
#endif /* CONFIG_PM_GENERIC_DOMAINS */
static int imx_gpc_probe(struct platform_device *pdev)
{
struct regulator *pu_reg;
int ret;
pu_reg = devm_regulator_get_optional(&pdev->dev, "pu");
if (PTR_ERR(pu_reg) == -ENODEV)
pu_reg = NULL;
if (IS_ERR(pu_reg)) {
ret = PTR_ERR(pu_reg);
dev_err(&pdev->dev, "failed to get pu regulator: %d\n", ret);
return ret;
}
return imx_gpc_genpd_init(&pdev->dev, pu_reg);
}
static const struct of_device_id imx_gpc_dt_ids[] = {
{ .compatible = "fsl,imx6q-gpc" },
{ .compatible = "fsl,imx6sl-gpc" },
{ }
};
static struct platform_driver imx_gpc_driver = {
.driver = {
.name = "imx-gpc",
.owner = THIS_MODULE,
.of_match_table = imx_gpc_dt_ids,
},
.probe = imx_gpc_probe,
};
static int __init imx_pgc_init(void)
{
return platform_driver_register(&imx_gpc_driver);
}
subsys_initcall(imx_pgc_init);

13
drivers/bus/imx-weim.c
View File

@ -142,7 +142,7 @@ static int __init weim_parse_dt(struct platform_device *pdev,
&pdev->dev);
const struct imx_weim_devtype *devtype = of_id->data;
struct device_node *child;
int ret;
int ret, have_child = 0;
if (devtype == &imx50_weim_devtype) {
ret = imx_weim_gpr_setup(pdev);
@ -155,14 +155,15 @@ static int __init weim_parse_dt(struct platform_device *pdev,
continue;
ret = weim_timing_setup(child, base, devtype);
if (ret) {
dev_err(&pdev->dev, "%s set timing failed.\n",
if (ret)
dev_warn(&pdev->dev, "%s set timing failed.\n",
child->full_name);
return ret;
}
else
have_child = 1;
}
ret = of_platform_populate(pdev->dev.of_node,
if (have_child)
ret = of_platform_populate(pdev->dev.of_node,
of_default_bus_match_table,
NULL, &pdev->dev);
if (ret)

5
include/dt-bindings/clock/imx6qdl-clock.h
View File

@ -248,6 +248,9 @@
#define IMX6QDL_PLL6_BYPASS 235
#define IMX6QDL_PLL7_BYPASS 236
#define IMX6QDL_CLK_GPT_3M 237
#define IMX6QDL_CLK_END 238
#define IMX6QDL_CLK_VIDEO_27M 238
#define IMX6QDL_CLK_MIPI_CORE_CFG 239
#define IMX6QDL_CLK_MIPI_IPG 240
#define IMX6QDL_CLK_END 241
#endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */

1
include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
View File

@ -207,6 +207,7 @@
#define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU1_DI1 (0x1 << 6)
#define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU2_DI0 (0x2 << 6)
#define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU2_DI1 (0x3 << 6)
#define IMX6Q_GPR3_MIPI_MUX_CTL_SHIFT 4
#define IMX6Q_GPR3_MIPI_MUX_CTL_MASK (0x3 << 4)
#define IMX6Q_GPR3_MIPI_MUX_CTL_IPU1_DI0 (0x0 << 4)
#define IMX6Q_GPR3_MIPI_MUX_CTL_IPU1_DI1 (0x1 << 4)